diff options
Diffstat (limited to 'recipes-multimedia/musicpd')
| -rw-r--r-- | recipes-multimedia/musicpd/files/0001-Tweaks-to-allow-building-with-older-meson.patch | 55 | ||||
| -rw-r--r-- | recipes-multimedia/musicpd/files/mpd-volatiles.conf | 2 | ||||
| -rw-r--r-- | recipes-multimedia/musicpd/files/mpd.conf.in | 425 | ||||
| -rw-r--r-- | recipes-multimedia/musicpd/libmpdclient_2.19.bb | 22 | ||||
| -rw-r--r-- | recipes-multimedia/musicpd/mpc_0.33.bb | 13 | ||||
| -rw-r--r-- | recipes-multimedia/musicpd/mpd/mpd.conf.in | 420 | ||||
| -rw-r--r-- | recipes-multimedia/musicpd/mpd_0.23.5.bb | 101 | ||||
| -rw-r--r-- | recipes-multimedia/musicpd/mpd_0.23.5.bbappend | 1 | ||||
| -rw-r--r-- | recipes-multimedia/musicpd/mpd_agldemo.inc | 57 |
9 files changed, 1096 insertions, 0 deletions
diff --git a/recipes-multimedia/musicpd/files/0001-Tweaks-to-allow-building-with-older-meson.patch b/recipes-multimedia/musicpd/files/0001-Tweaks-to-allow-building-with-older-meson.patch new file mode 100644 index 000000000..9dcb37001 --- /dev/null +++ b/recipes-multimedia/musicpd/files/0001-Tweaks-to-allow-building-with-older-meson.patch @@ -0,0 +1,55 @@ +From a01163d061fae0114a508be83c0ac83461fba43d Mon Sep 17 00:00:00 2001 +From: Scott Murray <scott.murray@konsulko.com> +Date: Wed, 2 Feb 2022 14:39:50 -0500 +Subject: [PATCH] Tweaks to allow building with older meson + +The requirements for newer meson in meson.build stem from changes +for building dependencies as sub-projects. If we avoid triggering +those, then older meson works fine. To enable such, manually edit +out additions from commits f23ecf00da, aef0535c55, 520028dcfc, and +6b1d0cb01d (not necessarily an exhaustive list), and set the +minimum meson version to 0.51, as that's where the build flags +for native vs target became available, and those are being used. + +Upstream-Status: Inappropriate [disable feature] + +Signed-off-by: Scott Murray <scott.murray@konsulko.com> +--- + meson.build | 15 +-------------- + 1 file changed, 1 insertion(+), 14 deletions(-) + +diff --git a/meson.build b/meson.build +index 481270567..6264485c8 100644 +--- a/meson.build ++++ b/meson.build +@@ -2,7 +2,7 @@ project( + 'mpd', + ['c', 'cpp'], + version: '0.23.5', +- meson_version: '>= 0.56.0', ++ meson_version: '>= 0.51.0', + default_options: [ + 'c_std=c11', + 'build.c_std=c11', +@@ -10,21 +10,8 @@ project( + 'build.cpp_std=c++17', + 'warning_level=3', + +- # If we build those libraries as Meson subproject, they shall be +- # linked statically into the MPD executable. +- 'expat:default_library=static', +- 'fmt:default_library=static', +- 'gtest:default_library=static', +- 'sqlite3:default_library=static', +- 'vorbis:default_library=static', +- + # Not interested in compiler warnings from subprojects. + 'expat:werror=false', +- 'expat:warning_level=0', +- 'fmt:warning_level=0', +- 'gtest:warning_level=0', +- 'sqlite3:warning_level=0', +- 'vorbis:warning_level=0', + ], + license: 'GPLv2+', + ) diff --git a/recipes-multimedia/musicpd/files/mpd-volatiles.conf b/recipes-multimedia/musicpd/files/mpd-volatiles.conf new file mode 100644 index 000000000..dd7bff094 --- /dev/null +++ b/recipes-multimedia/musicpd/files/mpd-volatiles.conf @@ -0,0 +1,2 @@ +d /var/volatile/lib/mpd 0755 mpd mpd +L+ /var/lib/mpd - - - - /var/volatile/lib/mpd diff --git a/recipes-multimedia/musicpd/files/mpd.conf.in b/recipes-multimedia/musicpd/files/mpd.conf.in new file mode 100644 index 000000000..6dae60ae0 --- /dev/null +++ b/recipes-multimedia/musicpd/files/mpd.conf.in @@ -0,0 +1,425 @@ +# An example configuration file for MPD +# See the mpd.conf man page for a more detailed description of each parameter. + + +# Files and directories ####################################################### +# +# This setting controls the top directory which MPD will search to discover the +# available audio files and add them to the daemon's online database. This +# setting defaults to the XDG directory, otherwise the music directory will be +# be disabled and audio files will only be accepted over ipc socket (using +# file:// protocol) or streaming files over an accepted protocol. +# +music_directory "/media" +# +# This setting sets the MPD internal playlist directory. The purpose of this +# directory is storage for playlists created by MPD. The server will use +# playlist files not created by the server but only if they are in the MPD +# format. This setting defaults to playlist saving being disabled. +# +playlist_directory "%playlist_directory%" +# +# This setting sets the location of the MPD database. This file is used to +# load the database at server start up and store the database while the +# server is not up. This setting defaults to disabled which will allow +# MPD to accept files over ipc socket (using file:// protocol) or streaming +# files over an accepted protocol. +# +db_file "%db_file%" +# +# These settings are the locations for the daemon log files for the daemon. +# These logs are great for troubleshooting, depending on your log_level +# settings. +# +# The special value "syslog" makes MPD use the local syslog daemon. This +# setting defaults to logging to syslog, otherwise logging is disabled. +# +log_file "syslog" +# +# This setting sets the location of the file which stores the process ID +# for use of mpd --kill and some init scripts. This setting is disabled by +# default and the pid file will not be stored. +# +#pid_file "/var/run/mpd/mpd.pid" +# +# This setting sets the location of the file which contains information about +# most variables to get MPD back into the same general shape it was in before +# it was brought down. This setting is disabled by default and the server +# state will be reset on server start up. +# +state_file "%state_file%" +# +# The location of the sticker database. This is a database which +# manages dynamic information attached to songs. +# +#sticker_file "~/.mpd/sticker.sql" +# +############################################################################### + + +# General music daemon options ################################################ +# +# This setting specifies the user that MPD will run as. MPD should never run as +# root and you may use this setting to make MPD change its user ID after +# initialization. This setting is disabled by default and MPD is run as the +# current user. +# +user "mpd" +# +# This setting specifies the group that MPD will run as. If not specified +# primary group of user specified with "user" setting will be used (if set). +# This is useful if MPD needs to be a member of group such as "audio" to +# have permission to use sound card. +# +#group "audio" +# +# This setting sets the address for the daemon to listen on. Careful attention +# should be paid if this is assigned to anything other then the default, any. +# This setting can deny access to control of the daemon. +# +# For network +bind_to_address "any" +# +# And for Unix Socket +#bind_to_address "~/.mpd/socket" +# +# This setting is the TCP port that is desired for the daemon to get assigned +# to. +# +#port "6600" +# +# This setting controls the type of information which is logged. Available +# setting arguments are "default", "secure" or "verbose". The "verbose" setting +# argument is recommended for troubleshooting, though can quickly stretch +# available resources on limited hardware storage. +# +#log_level "default" +# +# If you have a problem with your MP3s ending abruptly it is recommended that +# you set this argument to "no" to attempt to fix the problem. If this solves +# the problem, it is highly recommended to fix the MP3 files with vbrfix +# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which +# point gapless MP3 playback can be enabled. +# +#gapless_mp3_playback "yes" +# +# This setting enables MPD to create playlists in a format usable by other +# music players. +# +#save_absolute_paths_in_playlists "no" +# +# This setting defines a list of tag types that will be extracted during the +# audio file discovery process. Optionally, 'comment' can be added to this +# list. +# +#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc" +# +# This setting enables automatic update of MPD's database when files in +# music_directory are changed. +# +auto_update "yes" +# +# Limit the depth of the directories being watched, 0 means only watch +# the music directory itself. There is no limit by default. +# +auto_update_depth "3" +# +############################################################################### + + +# Symbolic link behavior ###################################################### +# +# If this setting is set to "yes", MPD will discover audio files by following +# symbolic links outside of the configured music_directory. +# +follow_outside_symlinks "no" +# +# If this setting is set to "yes", MPD will discover audio files by following +# symbolic links inside of the configured music_directory. +# +#follow_inside_symlinks "yes" +# +############################################################################### + + +# Zeroconf / Avahi Service Discovery ########################################## +# +# If this setting is set to "yes", service information will be published with +# Zeroconf / Avahi. +# +#zeroconf_enabled "yes" +# +# The argument to this setting will be the Zeroconf / Avahi unique name for +# this MPD server on the network. +# +#zeroconf_name "Music Player" +# +############################################################################### + + +# Permissions ################################################################# +# +# If this setting is set, MPD will require password authorization. The password +# can setting can be specified multiple times for different password profiles. +# +#password "password@read,add,control,admin" +# +# This setting specifies the permissions a user has who has not yet logged in. +# +#default_permissions "read,add,control,admin" +# +############################################################################### + + +# Input ####################################################################### +# + +#input { +# plugin "curl" +# proxy "proxy.isp.com:8080" +# proxy_user "user" +# proxy_password "password" +#} + +# +############################################################################### + +# Audio Output ################################################################ +# +# MPD supports various audio output types, as well as playing through multiple +# audio outputs at the same time, through multiple audio_output settings +# blocks. Setting this block is optional, though the server will only attempt +# autodetection for one sound card. +# +# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of +# other audio outputs. +# +# board specific examples ##################################################### +# (feel free to add futher) +# +# gumstix overo (tested with TOBI expansion board) +#audio_output { +# type "alsa" +# name "overo" +# mixer_control "Headset" +# mixer_index "0" +#} + +audio_output { + type "pipewire" + name "AGL PipeWire" +} + +# general examples ############################################################ +# +# An example of an ALSA output: +# +#audio_output { +# type "alsa" +# name "My ALSA Device" +## device "hw:0,0" # optional +## format "44100:16:2" # optional +## mixer_type "hardware" # optional +## mixer_device "default" # optional +## mixer_control "PCM" # optional +## mixer_index "0" # optional +#} +# +# An example of an OSS output: +# +#audio_output { +# type "oss" +# name "My OSS Device" +## device "/dev/dsp" # optional +## format "44100:16:2" # optional +## mixer_type "hardware" # optional +## mixer_device "/dev/mixer" # optional +## mixer_control "PCM" # optional +#} +# +# An example of a shout output (for streaming to Icecast): +# +#audio_output { +# type "shout" +# encoding "ogg" # optional +# name "My Shout Stream" +# host "localhost" +# port "8000" +# mount "/mpd.ogg" +# password "hackme" +# quality "5.0" +# bitrate "128" +# format "44100:16:1" +## protocol "icecast2" # optional +## user "source" # optional +## description "My Stream Description" # optional +## genre "jazz" # optional +## public "no" # optional +## timeout "2" # optional +## mixer_type "software" # optional +#} +# +# An example of a recorder output: +# +#audio_output { +# type "recorder" +# name "My recorder" +# encoder "vorbis" # optional, vorbis or lame +# path "/var/lib/mpd/recorder/mpd.ogg" +## quality "5.0" # do not define if bitrate is defined +# bitrate "128" # do not define if quality is defined +# format "44100:16:1" +#} +# +# An example of a httpd output (built-in HTTP streaming server): +# +#audio_output { +# type "httpd" +# name "My HTTP Stream" +# encoder "vorbis" # optional, vorbis or lame +# port "8000" +# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6 +## quality "5.0" # do not define if bitrate is defined +# bitrate "128" # do not define if quality is defined +# format "44100:16:1" +# max_clients "0" # optional 0=no limit +#} +# +# An example of a pulseaudio output (streaming to a remote pulseaudio server) +# +#audio_output { +# type "pulse" +# name "My Pulse Output" +## server "remote_server" # optional +## sink "remote_server_sink" # optional +#} +# +## Example "pipe" output: +# +#audio_output { +# type "pipe" +# name "my pipe" +# command "aplay -f cd 2>/dev/null" +## Or if you're want to use AudioCompress +# command "AudioCompress -m | aplay -f cd 2>/dev/null" +## Or to send raw PCM stream through PCM: +# command "nc example.org 8765" +# format "44100:16:2" +#} +# +## An example of a null output (for no audio output): +# +#audio_output { +# type "null" +# name "My Null Output" +# mixer_type "none" # optional +#} +# +# This setting will change all decoded audio to be converted to the specified +# format before being passed to the audio outputs. By default, this setting is +# disabled. +# +#audio_output_format "44100:16:2" +# +# If MPD has been compiled with libsamplerate support, this setting specifies +# the sample rate converter to use. Possible values can be found in the +# mpd.conf man page or the libsamplerate documentation. By default, this is +# setting is disabled. +# +#samplerate_converter "Fastest Sinc Interpolator" +# +############################################################################### + + +# Normalization automatic volume adjustments ################################## +# +# This setting specifies the type of ReplayGain to use. This setting can have +# the argument "off", "album" or "track". See <http://www.replaygain.org> +# for more details. This setting is off by default. +# +#replaygain "album" +# +# This setting sets the pre-amp used for files that have ReplayGain tags. By +# default this setting is disabled. +# +#replaygain_preamp "0" +# +# This setting enables on-the-fly normalization volume adjustment. This will +# result in the volume of all playing audio to be adjusted so the output has +# equal "loudness". This setting is disabled by default. +# +#volume_normalization "no" +# +############################################################################### + + +# MPD Internal Buffering ###################################################### +# +# This setting adjusts the size of internal decoded audio buffering. Changing +# this may have undesired effects. Don't change this if you don't know what you +# are doing. +# +#audio_buffer_size "2048" +# +# This setting controls the percentage of the buffer which is filled before +# beginning to play. Increasing this reduces the chance of audio file skipping, +# at the cost of increased time prior to audio playback. +# +#buffer_before_play "10%" +# +############################################################################### + + +# Resource Limitations ######################################################## +# +# These settings are various limitations to prevent MPD from using too many +# resources. Generally, these settings should be minimized to prevent security +# risks, depending on the operating resources. +# +connection_timeout "120" +#max_connections "10" +#max_playlist_length "16384" +#max_command_list_size "2048" +#max_output_buffer_size "8192" +# +############################################################################### + + +# Character Encoding ########################################################## +# +# If file or directory names do not display correctly for your locale then you +# may need to modify this setting. +# +#filesystem_charset "UTF-8" +# +# This setting controls the encoding that ID3v1 tags should be converted from. +# +#id3v1_encoding "ISO-8859-1" +# +############################################################################### + + +# SIDPlay decoder ############################################################# +# +# songlength_database: +# Location of your songlengths file, as distributed with the HVSC. +# The sidplay plugin checks this for matching MD5 fingerprints. +# See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq +# +# default_songlength: +# This is the default playing time in seconds for songs not in the +# songlength database, or in case you're not using a database. +# A value of 0 means play indefinitely. +# +# filter: +# Turns the SID filter emulation on or off. +# +#decoder { +# plugin "sidplay" +# songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt" +# default_songlength "120" +# filter "true" +#} +# +############################################################################### + diff --git a/recipes-multimedia/musicpd/libmpdclient_2.19.bb b/recipes-multimedia/musicpd/libmpdclient_2.19.bb new file mode 100644 index 000000000..6cff3c404 --- /dev/null +++ b/recipes-multimedia/musicpd/libmpdclient_2.19.bb @@ -0,0 +1,22 @@ +SUMMARY = "C client library for the Music Player Daemon" +LICENSE = "BSD-3-Clause" +LIC_FILES_CHKSUM = "file://COPYING;md5=06b9dfd2f197dc514d8ef06549684b77" +HOMEPAGE = "https://www.musicpd.org/libs/libmpdclient/" + +inherit meson + +SRC_URI = " \ + git://github.com/MusicPlayerDaemon/libmpdclient;branch=master;protocol=https \ +" +SRCREV = "27767959442ef390aabb16790494ba93fed962ef" +S = "${WORKDIR}/git" + +PACKAGECONFIG ??= "tcp" +PACKAGECONFIG[tcp] = "-Dtcp=true,-Dtcp=false" + +do_install:append() { + # libmpdclient's Vala bindings are outdated and unmaintained; it + # is likely that nobody will ever use them, so let's not install + # them + rm -rf ${D}${datadir}/vala +} diff --git a/recipes-multimedia/musicpd/mpc_0.33.bb b/recipes-multimedia/musicpd/mpc_0.33.bb new file mode 100644 index 000000000..09190a819 --- /dev/null +++ b/recipes-multimedia/musicpd/mpc_0.33.bb @@ -0,0 +1,13 @@ +SUMMARY = "A minimalist command line interface to the Music Player Daemon" +LICENSE = "GPLv2" +LIC_FILES_CHKSUM = "file://COPYING;md5=751419260aa954499f7abaabaa882bbe" +HOMEPAGE = "https://www.musicpd.org/clients/mpc/" + +inherit meson pkgconfig + +DEPENDS += "libmpdclient" + +SRC_URI = "git://github.com/MusicPlayerDaemon/mpc;branch=master;protocol=https" +SRCREV = "ef16b280052ef0320cb80f79d74c8ce0324005ed" + +S = "${WORKDIR}/git" diff --git a/recipes-multimedia/musicpd/mpd/mpd.conf.in b/recipes-multimedia/musicpd/mpd/mpd.conf.in new file mode 100644 index 000000000..f9f92c98b --- /dev/null +++ b/recipes-multimedia/musicpd/mpd/mpd.conf.in @@ -0,0 +1,420 @@ +# An example configuration file for MPD +# See the mpd.conf man page for a more detailed description of each parameter. + + +# Files and directories ####################################################### +# +# This setting controls the top directory which MPD will search to discover the +# available audio files and add them to the daemon's online database. This +# setting defaults to the XDG directory, otherwise the music directory will be +# be disabled and audio files will only be accepted over ipc socket (using +# file:// protocol) or streaming files over an accepted protocol. +# +music_directory "%music_directory%" +# +# This setting sets the MPD internal playlist directory. The purpose of this +# directory is storage for playlists created by MPD. The server will use +# playlist files not created by the server but only if they are in the MPD +# format. This setting defaults to playlist saving being disabled. +# +playlist_directory "%playlist_directory%" +# +# This setting sets the location of the MPD database. This file is used to +# load the database at server start up and store the database while the +# server is not up. This setting defaults to disabled which will allow +# MPD to accept files over ipc socket (using file:// protocol) or streaming +# files over an accepted protocol. +# +db_file "%db_file%" +# +# These settings are the locations for the daemon log files for the daemon. +# These logs are great for troubleshooting, depending on your log_level +# settings. +# +# The special value "syslog" makes MPD use the local syslog daemon. This +# setting defaults to logging to syslog, otherwise logging is disabled. +# +log_file "%log_file%" +# +# This setting sets the location of the file which stores the process ID +# for use of mpd --kill and some init scripts. This setting is disabled by +# default and the pid file will not be stored. +# +#pid_file "/var/run/mpd/mpd.pid" +# +# This setting sets the location of the file which contains information about +# most variables to get MPD back into the same general shape it was in before +# it was brought down. This setting is disabled by default and the server +# state will be reset on server start up. +# +state_file "%state_file%" +# +# The location of the sticker database. This is a database which +# manages dynamic information attached to songs. +# +#sticker_file "~/.mpd/sticker.sql" +# +############################################################################### + + +# General music daemon options ################################################ +# +# This setting specifies the user that MPD will run as. MPD should never run as +# root and you may use this setting to make MPD change its user ID after +# initialization. This setting is disabled by default and MPD is run as the +# current user. +# +user "mpd" +# +# This setting specifies the group that MPD will run as. If not specified +# primary group of user specified with "user" setting will be used (if set). +# This is useful if MPD needs to be a member of group such as "audio" to +# have permission to use sound card. +# +group "audio" +# +# This setting sets the address for the daemon to listen on. Careful attention +# should be paid if this is assigned to anything other then the default, any. +# This setting can deny access to control of the daemon. +# +# For network +bind_to_address "any" +# +# And for Unix Socket +#bind_to_address "~/.mpd/socket" +# +# This setting is the TCP port that is desired for the daemon to get assigned +# to. +# +#port "6600" +# +# This setting controls the type of information which is logged. Available +# setting arguments are "default", "secure" or "verbose". The "verbose" setting +# argument is recommended for troubleshooting, though can quickly stretch +# available resources on limited hardware storage. +# +#log_level "default" +# +# If you have a problem with your MP3s ending abruptly it is recommended that +# you set this argument to "no" to attempt to fix the problem. If this solves +# the problem, it is highly recommended to fix the MP3 files with vbrfix +# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which +# point gapless MP3 playback can be enabled. +# +#gapless_mp3_playback "yes" +# +# This setting enables MPD to create playlists in a format usable by other +# music players. +# +#save_absolute_paths_in_playlists "no" +# +# This setting defines a list of tag types that will be extracted during the +# audio file discovery process. Optionally, 'comment' can be added to this +# list. +# +#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc" +# +# This setting enables automatic update of MPD's database when files in +# music_directory are changed. +# +#auto_update "yes" +# +# Limit the depth of the directories being watched, 0 means only watch +# the music directory itself. There is no limit by default. +# +#auto_update_depth "3" +# +############################################################################### + + +# Symbolic link behavior ###################################################### +# +# If this setting is set to "yes", MPD will discover audio files by following +# symbolic links outside of the configured music_directory. +# +#follow_outside_symlinks "yes" +# +# If this setting is set to "yes", MPD will discover audio files by following +# symbolic links inside of the configured music_directory. +# +#follow_inside_symlinks "yes" +# +############################################################################### + + +# Zeroconf / Avahi Service Discovery ########################################## +# +# If this setting is set to "yes", service information will be published with +# Zeroconf / Avahi. +# +#zeroconf_enabled "yes" +# +# The argument to this setting will be the Zeroconf / Avahi unique name for +# this MPD server on the network. +# +#zeroconf_name "Music Player" +# +############################################################################### + + +# Permissions ################################################################# +# +# If this setting is set, MPD will require password authorization. The password +# can setting can be specified multiple times for different password profiles. +# +#password "password@read,add,control,admin" +# +# This setting specifies the permissions a user has who has not yet logged in. +# +#default_permissions "read,add,control,admin" +# +############################################################################### + + +# Input ####################################################################### +# + +input { + plugin "curl" +# proxy "proxy.isp.com:8080" +# proxy_user "user" +# proxy_password "password" +} + +# +############################################################################### + +# Audio Output ################################################################ +# +# MPD supports various audio output types, as well as playing through multiple +# audio outputs at the same time, through multiple audio_output settings +# blocks. Setting this block is optional, though the server will only attempt +# autodetection for one sound card. +# +# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of +# other audio outputs. +# +# board specific examples ##################################################### +# (feel free to add futher) +# +# gumstix overo (tested with TOBI expansion board) +#audio_output { +# type "alsa" +# name "overo" +# mixer_control "Headset" +# mixer_index "0" +#} +# +# general examples ############################################################ +# +# An example of an ALSA output: +# +#audio_output { +# type "alsa" +# name "My ALSA Device" +## device "hw:0,0" # optional +## format "44100:16:2" # optional +## mixer_type "hardware" # optional +## mixer_device "default" # optional +## mixer_control "PCM" # optional +## mixer_index "0" # optional +#} +# +# An example of an OSS output: +# +#audio_output { +# type "oss" +# name "My OSS Device" +## device "/dev/dsp" # optional +## format "44100:16:2" # optional +## mixer_type "hardware" # optional +## mixer_device "/dev/mixer" # optional +## mixer_control "PCM" # optional +#} +# +# An example of a shout output (for streaming to Icecast): +# +#audio_output { +# type "shout" +# encoding "ogg" # optional +# name "My Shout Stream" +# host "localhost" +# port "8000" +# mount "/mpd.ogg" +# password "hackme" +# quality "5.0" +# bitrate "128" +# format "44100:16:1" +## protocol "icecast2" # optional +## user "source" # optional +## description "My Stream Description" # optional +## genre "jazz" # optional +## public "no" # optional +## timeout "2" # optional +## mixer_type "software" # optional +#} +# +# An example of a recorder output: +# +#audio_output { +# type "recorder" +# name "My recorder" +# encoder "vorbis" # optional, vorbis or lame +# path "/var/lib/mpd/recorder/mpd.ogg" +## quality "5.0" # do not define if bitrate is defined +# bitrate "128" # do not define if quality is defined +# format "44100:16:1" +#} +# +# An example of a httpd output (built-in HTTP streaming server): +# +#audio_output { +# type "httpd" +# name "My HTTP Stream" +# encoder "vorbis" # optional, vorbis or lame +# port "8000" +# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6 +## quality "5.0" # do not define if bitrate is defined +# bitrate "128" # do not define if quality is defined +# format "44100:16:1" +# max_clients "0" # optional 0=no limit +#} +# +# An example of a pulseaudio output (streaming to a remote pulseaudio server) +# +#audio_output { +# type "pulse" +# name "My Pulse Output" +## server "remote_server" # optional +## sink "remote_server_sink" # optional +#} +# +## Example "pipe" output: +# +#audio_output { +# type "pipe" +# name "my pipe" +# command "aplay -f cd 2>/dev/null" +## Or if you're want to use AudioCompress +# command "AudioCompress -m | aplay -f cd 2>/dev/null" +## Or to send raw PCM stream through PCM: +# command "nc example.org 8765" +# format "44100:16:2" +#} +# +## An example of a null output (for no audio output): +# +#audio_output { +# type "null" +# name "My Null Output" +# mixer_type "none" # optional +#} +# +# This setting will change all decoded audio to be converted to the specified +# format before being passed to the audio outputs. By default, this setting is +# disabled. +# +#audio_output_format "44100:16:2" +# +# If MPD has been compiled with libsamplerate support, this setting specifies +# the sample rate converter to use. Possible values can be found in the +# mpd.conf man page or the libsamplerate documentation. By default, this is +# setting is disabled. +# +#samplerate_converter "Fastest Sinc Interpolator" +# +############################################################################### + + +# Normalization automatic volume adjustments ################################## +# +# This setting specifies the type of ReplayGain to use. This setting can have +# the argument "off", "album" or "track". See <http://www.replaygain.org> +# for more details. This setting is off by default. +# +#replaygain "album" +# +# This setting sets the pre-amp used for files that have ReplayGain tags. By +# default this setting is disabled. +# +#replaygain_preamp "0" +# +# This setting enables on-the-fly normalization volume adjustment. This will +# result in the volume of all playing audio to be adjusted so the output has +# equal "loudness". This setting is disabled by default. +# +#volume_normalization "no" +# +############################################################################### + + +# MPD Internal Buffering ###################################################### +# +# This setting adjusts the size of internal decoded audio buffering. Changing +# this may have undesired effects. Don't change this if you don't know what you +# are doing. +# +#audio_buffer_size "2048" +# +# This setting controls the percentage of the buffer which is filled before +# beginning to play. Increasing this reduces the chance of audio file skipping, +# at the cost of increased time prior to audio playback. +# +#buffer_before_play "10%" +# +############################################################################### + + +# Resource Limitations ######################################################## +# +# These settings are various limitations to prevent MPD from using too many +# resources. Generally, these settings should be minimized to prevent security +# risks, depending on the operating resources. +# +#connection_timeout "60" +#max_connections "10" +#max_playlist_length "16384" +#max_command_list_size "2048" +#max_output_buffer_size "8192" +# +############################################################################### + + +# Character Encoding ########################################################## +# +# If file or directory names do not display correctly for your locale then you +# may need to modify this setting. +# +#filesystem_charset "UTF-8" +# +# This setting controls the encoding that ID3v1 tags should be converted from. +# +#id3v1_encoding "ISO-8859-1" +# +############################################################################### + + +# SIDPlay decoder ############################################################# +# +# songlength_database: +# Location of your songlengths file, as distributed with the HVSC. +# The sidplay plugin checks this for matching MD5 fingerprints. +# See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq +# +# default_songlength: +# This is the default playing time in seconds for songs not in the +# songlength database, or in case you're not using a database. +# A value of 0 means play indefinitely. +# +# filter: +# Turns the SID filter emulation on or off. +# +#decoder { +# plugin "sidplay" +# songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt" +# default_songlength "120" +# filter "true" +#} +# +############################################################################### + diff --git a/recipes-multimedia/musicpd/mpd_0.23.5.bb b/recipes-multimedia/musicpd/mpd_0.23.5.bb new file mode 100644 index 000000000..3c6f3e41c --- /dev/null +++ b/recipes-multimedia/musicpd/mpd_0.23.5.bb @@ -0,0 +1,101 @@ +SUMMARY = "Music Player Daemon" +LICENSE = "GPLv2" +LIC_FILES_CHKSUM = "file://COPYING;md5=751419260aa954499f7abaabaa882bbe" + +HOMEPAGE ="http://www.musicpd.org" + +inherit meson useradd systemd pkgconfig + +DEPENDS += " \ + curl \ + sqlite3 \ + ${@bb.utils.filter('DISTRO_FEATURES', 'pulseaudio', d)} \ + yajl \ + boost \ + icu \ + dbus \ + expat \ + fmt \ +" + +SRC_URI = "git://github.com/MusicPlayerDaemon/MPD;branch=v0.23.x;protocol=https \ + file://mpd.conf.in \ + " +SRCREV = "df4b6b92f2c4bba1b55fe0a5559b19808abb28ff" +S = "${WORKDIR}/git" + +EXTRA_OEMESON += "${@bb.utils.contains('DISTRO_FEATURES', 'systemd', '-Dsystemd=enabled -Dsystemd_system_unit_dir=${systemd_system_unitdir} -Dsystemd_user_unit_dir=${systemd_system_unitdir}', '-Dsystemd=disabled', d)}" + +PACKAGECONFIG ??= "${@bb.utils.contains("LICENSE_FLAGS_WHITELIST", "commercial", "aac", "", d)} \ + alsa ao bzip2 daemon \ + ${@bb.utils.contains("LICENSE_FLAGS_WHITELIST", "commercial", "ffmpeg aac", "", d)} \ + fifo flac fluidsynth iso9660 \ + jack libsamplerate httpd \ + mms mpg123 modplug sndfile \ + upnp openal opus oss recorder \ + vorbis wavpack zlib" + +PACKAGECONFIG[aac] = "-Dfaad=enabled,-Dfaad=disabled,faad2" +PACKAGECONFIG[alsa] = "-Dalsa=enabled,-Dalsa=disabled,alsa-lib" +PACKAGECONFIG[ao] = "-Dao=enabled,-Dao=disabled,libao" +PACKAGECONFIG[audiofile] = "-Daudiofile=enabled,-Daudiofile=disabled,audiofile" +PACKAGECONFIG[bzip2] = "-Dbzip2=enabled,-Dbzip2=disabled,bzip2" +PACKAGECONFIG[cdioparanoia] = "-Dcdio_paranoia=enabled,-Dcdio_paranoia=disabled,libcdio-paranoia" +PACKAGECONFIG[daemon] = "-Ddaemon=true,-Ddaemon=false" +PACKAGECONFIG[ffmpeg] = "-Dffmpeg=enabled,-Dffmpeg=disabled,ffmpeg" +PACKAGECONFIG[fifo] = "-Dfifo=true,-Dfifo=false" +PACKAGECONFIG[flac] = "-Dflac=enabled,-Dflac=disabled,flac" +PACKAGECONFIG[fluidsynth] = "-Dfluidsynth=enabled,-Dfluidsynth=disabled,fluidsynth" +PACKAGECONFIG[httpd] = "-Dhttpd=true,-Dhttpd=false" +PACKAGECONFIG[id3tag] = "-Did3tag=enabled,-Did3tag=disabled,libid3tag" +PACKAGECONFIG[iso9660] = "-Diso9660=enabled,-Diso9660=disabled,libcdio" +PACKAGECONFIG[jack] = "-Djack=enabled,-Djack=disabled,jack" +PACKAGECONFIG[lame] = "-Dlame=enabled,-Dlame=disabled,lame" +PACKAGECONFIG[libsamplerate] = "-Dlibsamplerate=enabled,-Dlibsamplerate=disabled,libsamplerate0" +PACKAGECONFIG[mad] = "-Dmad=enabled,-Dmad=disabled,libmad" +PACKAGECONFIG[mms] = "-Dmms=enabled,-Dmms=disabled,libmms" +PACKAGECONFIG[modplug] = "-Dmodplug=enabled,-Dmodplug=disabled,libmodplug" +PACKAGECONFIG[mpg123] = "-Dmpg123=enabled,-Dmpg123=disabled,mpg123" +PACKAGECONFIG[openal] = "-Dopenal=enabled,-Dopenal=disabled,openal-soft" +PACKAGECONFIG[opus] = "-Dopus=enabled,-Dopus=disabled,libopus libogg" +PACKAGECONFIG[oss] = "-Doss=enabled,-Doss=disabled," +PACKAGECONFIG[recorder] = "-Drecorder=true,-Drecorder=false" +PACKAGECONFIG[smb] = "-Dsmbclient=enabled,-Dsmbclient=disabled,samba" +PACKAGECONFIG[sndfile] = "-Dsndfile=enabled,-Dsndfile=disabled,libsndfile1" +PACKAGECONFIG[upnp] = "-Dupnp=pupnp,-Dupnp=disabled,libupnp" +PACKAGECONFIG[vorbis] = "-Dvorbis=enabled,-Dvorbis=disabled,libvorbis libogg" +PACKAGECONFIG[wavpack] = "-Dwavpack=enabled,-Dwavpack=disabled,wavpack" +PACKAGECONFIG[zlib] = "-Dzlib=enabled,-Dzlib=disabled,zlib" + +do_install:append() { + install -o mpd -d \ + ${D}/${localstatedir}/lib/mpd \ + ${D}/${localstatedir}/lib/mpd/playlists + install -m775 -o mpd -g mpd -d \ + ${D}/${localstatedir}/lib/mpd/music + + install -d ${D}/${sysconfdir} + install -m 644 ${WORKDIR}/mpd.conf.in ${D}/${sysconfdir}/mpd.conf + sed -i \ + -e 's|%music_directory%|${localstatedir}/lib/mpd/music|' \ + -e 's|%playlist_directory%|${localstatedir}/lib/mpd/playlists|' \ + -e 's|%db_file%|${localstatedir}/lib/mpd/mpd.db|' \ + -e 's|%log_file%|${localstatedir}/log/mpd.log|' \ + -e 's|%state_file%|${localstatedir}/lib/mpd/state|' \ + ${D}/${sysconfdir}/mpd.conf + + # we don't need the icon + rm -rf ${D}${datadir}/icons +} + +RPROVIDES:${PN} += "${PN}-systemd" +RREPLACES:${PN} += "${PN}-systemd" +RCONFLICTS:${PN} += "${PN}-systemd" +SYSTEMD_SERVICE:${PN} = "mpd.socket" + +USERADD_PACKAGES = "${PN}" +USERADD_PARAM:${PN} = " \ + --system --no-create-home \ + --home ${localstatedir}/lib/mpd \ + --groups audio \ + --user-group mpd" diff --git a/recipes-multimedia/musicpd/mpd_0.23.5.bbappend b/recipes-multimedia/musicpd/mpd_0.23.5.bbappend new file mode 100644 index 000000000..5377a54c1 --- /dev/null +++ b/recipes-multimedia/musicpd/mpd_0.23.5.bbappend @@ -0,0 +1 @@ +require ${@bb.utils.contains('AGL_FEATURES', 'agldemo', 'mpd_agldemo.inc', '', d)} diff --git a/recipes-multimedia/musicpd/mpd_agldemo.inc b/recipes-multimedia/musicpd/mpd_agldemo.inc new file mode 100644 index 000000000..8bbd59196 --- /dev/null +++ b/recipes-multimedia/musicpd/mpd_agldemo.inc @@ -0,0 +1,57 @@ +FILESEXTRAPATHS:prepend := "${THISDIR}/files:" + +# Remove curl dependency to disable WebDAV support. +# Ideally this should be addressed by adding a PACKAGECONFIG option +# in the upstream recipe. +DEPENDS:remove = "curl" + +SRC_URI += "file://0001-Tweaks-to-allow-building-with-older-meson.patch \ + file://mpd-volatiles.conf" + +# The older meson in poky dunfell complains about the use of the +# build.{c_std,cpp_std} options even though they work, so we need to +# flag them to be ignored in the unknown configure option QA test. +# This can be removed after upgrading to Yocto Project 3.5. +UNKNOWN_CONFIGURE_WHITELIST = "build.c_std build.cpp_std" + +# This also needs to be pushed upstream. +PACKAGECONFIG[pipewire] = "-Dpipewire=enabled,-Dpipewire=disabled,pipewire" + +# Prune the default configuration a bit to remove various streaming/server +# options that are not required. +PACKAGECONFIG = " \ + ${@bb.utils.contains("LICENSE_FLAGS_WHITELIST", "commercial", "aac", "", d)} \ + bzip2 \ + daemon \ + ${@bb.utils.contains("LICENSE_FLAGS_WHITELIST", "commercial", "ffmpeg aac", "", d)} \ + flac \ + libsamplerate \ + mpg123 \ + sndfile \ + opus \ + vorbis \ + wavpack \ + zlib \ + pipewire \ + id3tag \ +" + +SYSTEMD_AUTO_ENABLE = "enable" + +# Override default as AGL's PipeWire configuration does not make use of audio +# group. As opposed to using the group setting in mpd.conf, this keeps the +# files created in /var/lib/mpd as mpd.mpd, which seems safer. +USERADD_PARAM:${PN} = " \ + --system --no-create-home \ + --home ${localstatedir}/lib/mpd \ + --groups pipewire \ + --user-group mpd" + +# Install volatile redirect for /var/lib/mpd to avoid any chance of metadata +# corruption on reboot. This matches what as previously done with the +# lightmediascanner configuration. +do_install:append() { + if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then + install -D -m 0644 ${WORKDIR}/mpd-volatiles.conf ${D}${sysconfdir}/tmpfiles.d/mpd.conf + fi +} |