diff options
Diffstat (limited to 'recipes-test/gcovr-wrapper')
| -rw-r--r-- | recipes-test/gcovr-wrapper/gcovr-wrapper/gcovr-wrapper | 320 | ||||
| -rw-r--r-- | recipes-test/gcovr-wrapper/gcovr-wrapper_1.0.bb | 17 |
2 files changed, 0 insertions, 337 deletions
diff --git a/recipes-test/gcovr-wrapper/gcovr-wrapper/gcovr-wrapper b/recipes-test/gcovr-wrapper/gcovr-wrapper/gcovr-wrapper deleted file mode 100644 index 12580237d..000000000 --- a/recipes-test/gcovr-wrapper/gcovr-wrapper/gcovr-wrapper +++ /dev/null @@ -1,320 +0,0 @@ -#!/bin/bash -# -# Copyright (C) 2020 Konsulko Group -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -# -# gcovr wrapper for generating coverage reports against AGL bindings -# on target. With a given binding name or coverage widget file, the -# coverage version will be installed, and the pyagl tests for the -# binding run before generating a report with gcovr. The afm-test -# test widget or a user-supplied command may be run instead of the -# pyagl tests, see usage below, or run with "--help". -# - -usage() { - cat <<-EOF - Usage: - $(basename $0) [options] <binding name | widget file> - - Options: - -h, --help - Print this help and exit - - -k, --keep - Do not remove temporary files/directories - - -o, --gcovr-options - Additional gcovr options, multiple options should be quoted - - -w, --workdir - gcov/gcovr temporary working directory, defaults to /tmp/gcov - The directory will be removed after running without --keep if it - is empty, use caution if specifying existing system directories! - - --pyagl - Run pyagl tests for binding, enabled by default - - --afm-test - Run afm-test test widget tests for binding. - If specified, disables pyagl tests; note that the last argument in - the command-line will take precedence. - - -c, --command - Test command to use in place of pyagl or afm-test, should be quote - If specified, disables pyagl and afm-test tests. - - EOF -} - -# Helper to validate widget install dir -check_wgt_install() { - if [ ! \( -d $1 -o -f $1/config.xml \) ]; then - echo "ERROR: No widget install at $1" - exit 1 - elif [ ! -d $1/src ]; then - echo "ERROR: No source in $1/src" - exit 1 - fi -} - -# Helper to run gcovr inside mount namespace environment -gcovr_runner() { - wgt_install_dir=/var/local/lib/afm/applications/$1 - check_wgt_install ${wgt_install_dir} - - if [ ! -d $workdir/$1 ]; then - echo "ERROR: No coverage data in $workdir/$1" - exit 1 - fi - - # Get original source path - gcno=$(cd $workdir/$1 && find -name '*.gcno' | head -n 1 | cut -d/ -f2-) - if [ -z "$gcno" ]; then - echo "ERROR: no gcno file found in $workdir/$1" - exit 1 - fi - srcfile=$(strings $workdir/$1/${gcno} | grep "$(basename ${gcno%.gcno})$" | uniq) - srcdir=$(echo $srcfile | sed "s|/${gcno%%/*}/.*$||") - - # Set up mounts for chroot to run gcovr in - # NOTE: We do not unmount these later, as we assume we are in a - # private mount namespace and they will go away on exit from - # it. - echo "Setting up mounts" - tmpdir=$(mktemp -d) - echo $tmpdir > $workdir/.runner_tmpdir - mkdir -p $tmpdir/{lower,upper,work,merged} - # NOTE: Could potentially use rbind here, but explicitly mounting - # just what we need seems safer - mount --bind / $tmpdir/lower - mount -t overlay -o lowerdir=$tmpdir/lower,upperdir=$tmpdir/upper,workdir=$tmpdir/work overlay $tmpdir/merged - mount --bind /proc $tmpdir/merged/proc - mount --bind /sys $tmpdir/merged/sys - mount --bind /dev $tmpdir/merged/dev - mount --bind /tmp $tmpdir/merged/tmp - # Bind in the data files - # NOTE: $workdir is bound instead of specifically just $workdir/$1, - # so that e.g. html output to another directory in /tmp will - # work as expected. A determined user may be able to shoot - # themselves in the foot, but for now the trade off seems - # acceptable. - mkdir -p $tmpdir/merged/$workdir - mount --bind $workdir $tmpdir/merged/$workdir - # Bind the source files to their expected location - mkdir -p $tmpdir/merged/$srcdir - mount --bind ${wgt_install_dir}/src $tmpdir/merged/$srcdir - - echo "Entering chroot" - echo - exec chroot $tmpdir/merged \ - /usr/bin/gcovr -r $srcdir --object-directory $workdir/$1 --gcov-filter-source-errors -s ${GCOV_RUNNER_GCOVR_OPTIONS} -} - -# Helper to clean up after runner -gcovr_runner_cleanup() { - rm -rf $workdir/$1 - if [ -f $workdir/.runner_tmpdir ]; then - tmpdir=$(cat $workdir/.runner_tmpdir) - rm -rf $tmpdir - rm -f $workdir/.runner_tmpdir - fi - if [ "$workdir" != "/tmp" ]; then - rmdir $workdir 2>/dev/null || true - fi -} - -# Parse arguments -OPTS=$(getopt -o +hko:pw:c: --longoptions gcovr-runner,afm-test,command:,help,keep,gcovr-options:,pyagl,workdir: -n "$(basename $0)" -- "$@") -if [ $? -ne 0 ]; then - exit 1 -fi -eval set -- "$OPTS" - -runner=false -keep=false -wgt="" -cmd="" -options="" -afmtest=false -pyagl=true -workdir="/tmp/gcov" - -while true; do - case "$1" in - --gcovr-runner) runner=true; shift;; - --afm-test) afmtest=true; pyagl=false; shift;; - -c|--command) cmd="$2"; shift; shift;; - -h|--help) usage; exit 0;; - -k|--keep) keep=true; shift;; - -o|--gcovr-options) options="$2"; shift; shift;; - -p|--pyagl) pyagl=true; afmtest=false; shift;; - -w|--workdir) workdir="$2"; shift; shift;; - --) shift; break;; - *) break;; - esac -done - -# Encode the assumption that a specified command means it runs instead -# of any other tests. -if [ -s "$cmd" ]; then - pyagl=false - afmtest=false -fi - -if [ $# -ne 1 ]; then - # Always expect widget name as single non-option argument - usage - exit 1 -fi - -# Rationalize workdir just in case -workdir=$(realpath "$workdir") - -if [ "$runner" = "true" ]; then - if [ "${GCOV_RUNNER_READY}" != "true" ]; then - echo "ERROR: gcovr environment not ready!" - exit 1 - fi - gcovr_runner $1 - # If we get here, it'd be an error, so return 1 - exit 1 -fi - -binding=$1 -if [ "${1%.wgt}" != "$1" ]; then - # User has specified path to a widget file - wgt=$(realpath $1) - binding=$(basename "${1%-coverage.wgt}") -else - wgt=/usr/AGL/apps/coverage/${binding}-coverage.wgt -fi -if [ ! -f $wgt ]; then - echo "ERROR: No widget $wgt" - exit 1 -elif [ "$afmtest" = "true" -a ! -f /usr/AGL/apps/test/${binding}-test.wgt ]; then - echo "ERROR: No test widget for $binding" - exit 1 -fi - -# Determine starting systemd unit name -service=$(systemctl --all |grep afm-service-$binding |sed 's/^[ *] \([^ ]*\).*/\1/') -if [ -z "$service" ]; then - echo "ERROR: Could not determine systemd service unit for $binding" - exit 1 -fi - -# Install coverage widget -echo "Removing $binding widget" -systemctl stop $service -afm-util remove $binding -echo -echo "Installing $binding coverage widget" -afm-util install $wgt -echo - -wgt_install_dir=/var/local/lib/afm/applications/$binding -check_wgt_install ${wgt_install_dir} -gcov_src=${wgt_install_dir}/coverage -if [ ! -d ${gcov_src} ]; then - echo "ERROR: No coverage information in ${gcov_src}" - exit 1 -elif [ ! -f ${gcov_src}/gcov.env ]; then - echo "ERROR: No gcov environment file at ${gcov_src}/gcov.env" - exit 1 -fi - -# -# NOTE: In theory, the coverage data collection could be done inside -# the mount namespace / chroot, but the potential for issues -# when doing that seems higher than just running gcovr there, -# so a conservative approach is taken. -# - -# Set up things for the binary to write out gcda data files -# -# Having the matching build directory hierarchy in place and -# writeable by the target binary before any restart and testing is -# key to things working. -# -# As well, the environment file with the GCOV_PREFIX and -# GCOV_PREFIX_STRIP values needs to be present before running so the -# gcda files will get written into the relocated build hierarchy. -# -echo "Installing coverage information for $binding" -mkdir -p $workdir -rm -rf $workdir/$binding -cp -dr ${gcov_src} $workdir/$binding -chsmack -r -a System::Log $workdir -chmod -R go+w $workdir - -# Install the gcov environment file -mkdir -p /etc/afm/widget.env.d/$binding -if [ "${workdir}" = "/tmp/gcov" ]; then - cp ${gcov_src}/gcov.env /etc/afm/widget.env.d/$binding/gcov -else - # Update GCOV_PREFIX to point into workdir - sed "s|^GCOV_PREFIX=.*|GCOV_PREFIX=${workdir}/$binding|" ${gcov_src}/gcov.env > /etc/afm/widget.env.d/$binding/gcov -fi -chsmack -r -a _ /etc/afm/widget.env.d/$binding - -# Determine new systemd unit name (version may now be different) -service=$(systemctl --all |grep afm-service-$binding |sed 's/^[ *] \([^ ]*\).*/\1/') -if [ -z "$service" ]; then - echo "ERROR: Could not determine systemd service unit for $binding" - exit 1 -fi - -# Restart the binding -systemctl start $service -echo - -# Run tests or given command -if [ -n "$cmd" ]; then - echo "Running command: $cmd" - export AGL_AVAILABLE_INTERFACES=${AGL_AVAILABLE_INTERFACES:-ethernet} - eval $cmd -elif [ "$pyagl" = "true" ]; then - echo "Running $binding pyagl tests" - export AGL_AVAILABLE_INTERFACES=${AGL_AVAILABLE_INTERFACES:-ethernet} - pytest -k "${binding#agl-service-} and not hwrequired" /usr/lib/python3.?/site-packages/pyagl -else - echo "Running $binding test widget" - # NOTE: su to agl-driver is required here to avoid fallout from - # the "afm-util run" in afm-test seemingly triggering the - # start of other per-user bindings for the root user. - su -l -c "/usr/bin/afm-test /usr/AGL/apps/test/${binding}-test.wgt" agl-driver -fi - -# Restart again to trigger data file writing -systemctl restart $service -echo - -# Run ourselves in gcovr runner mode inside a private mount namespace -export GCOV_RUNNER_READY=true -# NOTE: Passing gcovr options in the environment to avoid quoting hassles -export GCOV_RUNNER_GCOVR_OPTIONS="$options" -runner_options="--workdir ${workdir}" -unshare -m $0 --gcovr-runner ${runner_options} $binding -rc=$? - -if [ "$keep" != "true" ]; then - # Clean up after ourselves - gcovr_runner_cleanup $1 - rm -f /etc/afm/widget.env.d/$1/gcov - rmdir /etc/afm/widget.env.d/$1 2>/dev/null || true -fi - -exit $rc - diff --git a/recipes-test/gcovr-wrapper/gcovr-wrapper_1.0.bb b/recipes-test/gcovr-wrapper/gcovr-wrapper_1.0.bb deleted file mode 100644 index 8cb228d50..000000000 --- a/recipes-test/gcovr-wrapper/gcovr-wrapper_1.0.bb +++ /dev/null @@ -1,17 +0,0 @@ -SUMMARY = "AGL gcovr wrapper" -DESCRIPTION = "This wrapper script enables running gcovr against a \ -AGL binding to generate a coverage report of running pyagl tests, \ -the afm-test test widget, or a user-supplied command." - -LICENSE = "Apache-2.0" -LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/Apache-2.0;md5=89aea4e17d99a7cacdbeed46a0096b10" - -SRC_URI += "file://gcovr-wrapper" - -inherit allarch - -do_install() { - install -D -m 0755 ${WORKDIR}/gcovr-wrapper ${D}${bindir}/gcovr-wrapper -} - -RDEPENDS:${PN} = "bash gcovr" |