summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2020-01-20cluster-demo-support: add recipe for cluster-demo-simulatorJan-Simon Moeller4-0/+426
The cluster-demo-simulator is a small python script that sends can messages to simulate speed and rpm. It has support for steering wheel events. Bug-AGL: SPEC-3090 . Change-Id: I45bf259c984c59912a674a57ccc642a1917a3209 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-01-06demo-i2c-udev-conf: fix inclusion in packagegroup-agl-demo-platformJan-Simon Moeller1-2/+3
The inclusion was not working. Fix it. Bug-AGL: SPEC-3091 . Change-Id: Ibbeed9665e4f1cde58a7b60205b33f94a7039d59 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2019-12-29Add qt-qrcode recipe for use in settings appScott Murray3-3/+204
Add a recipe for the qt-qrcode libqrencode wrapper library to allow using it to display QR codes in the settings app, and update the settings app dependencies to add it as a dependency. As cleanup, the qtwebsockets dependency has been dropped from settings since it no longer requires it. Bug-AGL: SPEC-2981 Change-Id: Ia0d40ea1151765fa967457bf2ab6624dc7bc259d Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-12-29Add virtual sllin support and LIN bridging to CAN for demosScott Murray6-8/+76
To enable seeing the steering wheel LIN messages on the cluster board for the planned CES demo, a systemd unit that wraps the use of candump in bridging mode is added when the agl-cluster-support feature is enabled. To make sure that the sllin0 interface is always available for testing without the specific demo LIN hardware, a vcan interface is set up as sllin0 when the ttyUSB0 device representing the serial adapter for the LIN transceiver is not present. Since this virtual sllin0 interface is very useful for general testing of the steering wheel event support up through the low-can and signal-composer stack, it has not been hidden behind agl-cluster-demo-support. Bug-AGL: SPEC-3049 Change-Id: I527763176ce0f8b4d50cc472ec2343a6596286e2 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-12-29Add demo low-can device mappingScott Murray4-1/+30
Rework the agl-demo-preload feature to specify a new demo-specific PREFERRED_RPROVIDER for the new virtual/low-can-dev-mapping virtual package. This enables using the sllin0 interface on the CES demo setup as the low-speed interface. Bug-AGL: SPEC-3076 Change-Id: I872137d8acb1f5ec5df9eac92f25953b28128b36 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-12-19Remove unneeded recipehalibut_8.0.4halibut/8.0.48.0.4Jan-Simon Möller1-19/+0
This removes a warning. Change-Id: I7054d7770531577be6b7e609369a684b9d5fe716 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-12-18Remove libqtappfw recipeScott Murray1-20/+0
Remove libqtappfw recipe, as it has been migrated to meta-agl to make it available for other images that use meta-agl-profile-graphical-qt5. Bug-AGL: SPEC-3045 Change-Id: I58b172bb0dd480e21ac44d7934f5885788bc0dca Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-12-15Add udev rules and scripts for demo platform configurationJan-Simon Moeller9-1/+136
Add recipes for udev rules and associated scripts 1) Support USB attached I2C devices for RTC and HVAC LED support. The RTC support loads and configures the required rtc-ds1307 driver, and sets the time from the RTC clock. The HVAC LED support configures the LED device names for use by the HVAC binding. The new demo-i2c-udev-conf recipe is added to DEMO_PLATFORM_CONF variable in packagegroup-agl-demo-platform to have them added to the agl-demo-platform image. Since they use udev rules to detect the corresponding hardware, this should be safe for all platforms. Change-Id: Id08571b43c7ae9275496980e0a5568e145a1f653 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> (cherry picked from commit d412114c0cf132a77f3b3482c5440b1a1c961b77)
2019-12-12dashboard: update dependenciesScott Murray1-1/+6
Add libqtappfw to DEPENDS for dashboard app for signal composer event support, and to RDEPENDS as well as new runtime dependency agl-service-signal-composer. Bug-AGL: SPEC-3042 Change-Id: I955f821798d85fbb0f9265ee55b81ff0bd7db620 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-12-12Disable Kingfisher onboard Bluetooth when using h3ulcbScott Murray2-3/+3
Extend the current default disabling of the Kingfisher onboard Bluetooth when using m3ulcb to include h3ulcb as well. Bug-AGL: SPEC-3043 Change-Id: Ie1d5d39fcd23ad690dac8d2481152fb17ee79da5 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-12-11agl-demo-platform-crosssdk: add gcc-sanitizer to TOOLCHAIN_TARGET_TASKMatt Ranostay1-0/+5
Add gcc-sanitizers package to TOOLCHAIN_TARGET_TASK which allows linking of libasan for detecting use-after-free and other memory corruption issue in built applications/libraries. Bug-AGL: SPEC-3040 Change-Id: Idad618e2bd0e9fa98baa9a3befc694c5bddeb711 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2019-12-03ondemandnavi: correct typo in naviconfig.iniMatt Ranostay1-1/+1
Bug-AGL: SPEC-2933 Change-Id: Ie6807350306f48a5ffabc3230ae35ada5ceaaa3f Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> (cherry picked from commit c5efa9f8b7ecc9dd0ff49e0dde9e3ea281b320de)
2019-12-02libnaviapi-agl: remove deprecated packageMatt Ranostay1-18/+0
agl-service-navigation rewrite no longer has a interface library. For interfacing to clients this has been moved to libqtappfw Bug-AGL: SPEC-2880 Change-Id: I286020ddb0fa26ecb286c1f3682841b40683e418 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> (cherry picked from commit 28ea9b9f75aa10624808bf376d77a992a48e7139)
2019-12-02poiapp: remove libnaviapi-agl dependencyMatt Ranostay1-1/+1
Bug-AGL: SPEC-2880 Change-Id: If8480e919ac129249d4e1ca20d30477541fc3424 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> (cherry picked from commit 9c2527139b1d2447b6c6eece2052860cd5166547)
2019-11-29packagegroups: remove libnaviapi-agl packageMatt Ranostay1-5/+0
libnaviapi-agl no longer exists since agl-service-navigation rewrite so remove it. Bug-AGL: SPEC-2880 Change-Id: I0ebf10c526bf28c16e77a5ef95bbfcf02cc6546d Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> (cherry picked from commit b706fa19383aac2717f96b2e9734d6561c5f5007)
2019-11-27navigation: remove deprecated packageMatt Ranostay10-318/+0
navigation is no longer used, and will not work with agl-service-navigation rewrite so must be removed. Bug-AGL: SPEC-2880 Change-Id: Ifbd96abfba2c46b1b20180ca86d5fcef2b1d5aae Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> (cherry picked from commit d8222a239eb57a6a48cadb3f9385b0e5beba38f2)
2019-11-27mapviewer: remove recipe due to package being deprecatedMatt Ranostay5-129/+0
mapviewer is no longer used, and will not work with agl-service-navigation rewrite so must be removed. Bug-AGL: SPEC-2880 Change-Id: Ia3a60200ba78be689874c99b18c2b5b329c39a45 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> (cherry picked from commit d713285f617aed53a897da8d9f8f66943c7b09e4)
2019-11-27ondemandnavi: remove org.agl.naviapi.conf from recipeMatt Ranostay2-23/+1
agl-service-navigation uses the afb framework and application doesn't need DBus access anymore. Bug-AGL: SPEC-2880 Change-Id: Ie381eff74cc4f053a02fe4e56f9fadc3cf191235 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> (cherry picked from commit 94d43cc23ef59dcce4912323e19c31247126c101)
2019-11-26docs: Update descriptions of agl-sota.Patrick Vacek2-19/+28
Corrected the layers required for the agl-sota feature. Signed-off-by: Patrick Vacek <patrickvacek@gmail.com> Change-Id: I5a464fe600e9502348cbaf3d314a69fbf10358ce
2019-11-20libqtappfw: update SRCREVMatt Ranostay1-1/+1
fff812b libqtappfw: remove not currently implemented broadcastWaypoints 00fa3ee libqtappfw: add initial navigation support ea82520 libqtappfw: add Qt5Qml to qtappfw.pc.in Bug-AGL: SPEC-2880 Change-Id: I743a7c41f6662d909cbda838ea1c298a98a60460 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2019-11-17ondemandnavi: add libqtappfw to RDEPENDShalibut_8.0.3halibut/8.0.38.0.3Matt Ranostay1-0/+1
Add libqtappfw to RDEPENDS for future interface between navigation service rewrite and application. Bug-AGL: SPEC-2880 Change-Id: I88d9bd225ce8c1ed36ebce0d4855498406cbf0fd Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> (cherry picked from commit d367bf23b04810d53351c63e6505376eaacc32ae)
2019-11-17ondemandnavi: add libqtappfw to DEPENDSMatt Ranostay1-0/+1
Bug-AGL: SPEC-28800 Change-Id: I901064e402e010805c1abfdff06f1c8352a1cdd1 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> (cherry picked from commit 26ec65821cba17a3b641c936cccdeb9757a64fa2)
2019-11-17tbtnavi: add libqtapp + agl-service-navigation dependenciesMatt Ranostay1-0/+3
Bug-AGL: SPEC-2880 Change-Id: I78d00e0e2646c9c226173ef3df783f99c6e9d64e Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2019-11-11poiapp: add libqtappfw to RDEPENDSMatt Ranostay1-1/+2
Add libqtappfw to RDEPENDS for future interface between navigation service rewrite and application. Bug-AGL: SPEC-2880 Change-Id: I2a62f4c08b90133c7eda5e0c2b902221b9bf1941 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2019-11-07agl-demo: add agl-speech-framework as a dependencyScott Murray1-1/+1
Add agl-speech-framework as a dependency of agl-demo now that agl-service-voice-high is not dependent on the Alexa voiceagent. This will enable having the homescreen application dynamically displaying a push to talk button when a voiceagent is available. Bug-AGL: SPEC-2858 Change-Id: I6249b4538661bcc8f76a9472f563c03f047cefc1 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-11-07Refactor packagegroup to enable sllin on h3Jan-Simon Möller1-10/+19
Remove the restriction to only add sllin on m3 as we're moving to the h3 in the demo. v2: make the settings adjustable in local.conf and remove comment. Bug-AGL: SPEC-2826 Change-Id: I09ea14934e3714daba6e94c81902453872ce1aa9 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> (cherry picked from commit 9b02ca4c8ea81bba23f97b7eb1e8fe200102a9eb)
2019-11-06Update LIN demo to use lin-configScott Murray6-11/+47
Changes include: - Add patch to fix lin-config recipe build QA error. - Tweak lin-config recipe to install lin_config as executable. - Rework sllin-demo systemd unit and start_lin_demo.sh script to use lin_config with an appropriate configuration file that enables polling of the steering wheel adapter instead of just using ldattach. Bug-AGL: SPEC-2918 Change-Id: I3258b7e34cecbbb1cfb93ea6f63a44f0bbb2c06f Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-11-05Add lin-config tool to facilitate pollingJan-Simon Möller2-0/+60
This tool allows to setup the BCM in the linux kernel to poll the lin bus. This is needed to query the steering wheel. Bug-AGL: SPEC-2918 . Change-Id: I4887c0d179b4e93aa7bae6406057a8bd8ba79999 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> (cherry picked from commit 8a55ca4d1658c18f8b750c0a2d9e07a65099e31d)
2019-10-31ondemandnavi-config: update default Mapbox styleScott Murray1-1/+1
Update the default Mapbox style to the value referenced in both the naviconfig.ini reading code and previously hard-coded in tbtnavi. Both ondemandnavi and tbtnavi should end up with the same style if using Mapbox, dependent on related ondemandnavi changes. Bug-AGL: SPEC-2913, SPEC-2916 Change-Id: I7951831fe760bb61d3c3e398e2679f697a4d1800 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-10-31Add tbtnavi cluster navigation applicationScott Murray2-4/+36
Add recipe for tbtnavi turn by turn navigation application for use on cluster remote display, and update packagegroup-agl-demo-platform to pull it in when PREFERRED_RPROVIDER_virtual/navigation is ondemandnavi (the default) and the agl-cluster-demo-support feature is enabled. Bug-AGL: SPEC-2913 Change-Id: I0280fe3a2fbd3ff58a028232560b421e83baa887 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-10-23Install a full unzip for images with agl-develJan-Simon Möller1-0/+1
This avoids an issue with the busybox unzip throwing a CRC error. We don't need unzip for normal operation, so only add it for agl-devel. Bug-AGL: SPEC-2920 . Change-Id: Ic6c998ba1a8e30467cda1c19bff7c12558c40017 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-10-21agl-demo-platform-crosssdk: add libstdc++-staticdevScott Murray1-0/+5
Add libstdc++-staticdev to target toolchain to support building agl-service-voice-high or other users of the C++17 filesystem standard library feature. This can be removed upon upgrade to gcc 9.x, as it will no longer be necessary. Bug-AGL: SPEC-2856, SPEC-2857 Change-Id: Ifd50d4e9960fe0bede887317116e6587eca5eb3d Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-10-20ondemandnavi-config: use OSM tiles by defaultMatt Ranostay1-1/+2
To simplify development switch to use the OSM tiles as it requires no API key. Bug-AGL: SPEC-2821 Change-Id: Ifccb13a20e3738cce72fc5496414313a2a2f4ad6 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> (cherry picked from commit 4bebb68f7f44dd6b9d5187ba5e58a37dd689d534)
2019-10-16agl-demo-platform-crosssdk: add nlohmann-jsonScott Murray1-0/+6
Add nlohmann-json to target toolchain to support building the speech services. This is required until either the agl-speech-framework feature is added as a dependency of agl-demo, or the speech services are migrated into the core profile. Bug-AGL: SPEC-2856, SPEC-2857 Change-Id: I67fe96a73f5cccc8c2dbf2642041f2b64802c512 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-09-27vboxguestdrivers: add vboxguestdrivers 6.0.10 recipehalibut_8.0.2halibut/8.0.28.0.2Matt Ranostay2-0/+120
VirtualBox 6.0.x has improved graphics support but need a more recent version of the vboxguestdrivers drivers to utilize. Bug-AGL: SPEC-2830 Change-Id: I0989904c913a0e9ce5d9cf4c60f259a8f037ba7c Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2019-09-26libqtappfw: update SRCREVRaquel Medina1-1/+1
* 45ed097 network: fix arguments on set_properties calls * 18dde87 wired: add hooks for addressing configuration * fc0369f mediaplayer: clear metadata in consumer UI on media removal * 02daaf4 libqtappfw: bluetooth-map: add support for list_ messages + message verbs Bug-AGL: SPEC-2676 Change-Id: If0984870c08ed61ed2315a66080f6fe1163edbab Signed-off-by: Raquel Medina <raquel.medina@konsulko.com>
2019-09-20ttf-dejavu: remove emoji glyphs from dejavu fontsMatt Ranostay3-0/+26
Derivate of DejaVu without characters listed as emoji, in order not to override color fonts. Ref: https://aur.archlinux.org/packages/ttf-dejavu-emojiless/ Bug-AGL: SPEC-2701 Change-Id: I6e01b62ff8e4051a4bb4db81b1a0b4f22a4cc4ec Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> (cherry picked from commit 3757aec8c8d76a19f8083cb4542a6553adf01f00)
2019-09-18packagegroups: move noto-emoji to TTF_FONTS defineMatt Ranostay2-1/+1
Move noto-emoji from packagegroup-agl-ivi-graphics.bb to TTF_FONTS in packagegroup-agl-demo.bb Bug-AGL: SPEC-2701 Change-Id: I3b0eeb0caea288229caacbcaf2b52369ac8dde8d Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2019-09-12radio: Update default presets locationScott Murray1-10/+6
Since the changes to run the applications as non-root, the location of the default preset file has not matched with the agl-driver user the application runs as. Since simply changing the install location to /home/1001 would require some post-install SMACK label tinkering, and is perhaps fragile to the application user, the files are now instead installed to /etc/xdg/AGL, with the defaults to be used named radio-presets.conf. A corresponding change to the radio application to look in that location before trying the appdata directory is also required. Bug-AGL: SPEC-2789 Change-Id: Ic5756420e21471096b74b476ad243e44e87ef561 Signed-off-by: Scott Murray <scott.murray@konsulko.com> (cherry picked from commit abe2d9282954936e222c2989c1d6bbbbead939fc)
2019-09-12Migrate poiapp and libnaviapi-agl to AGL GerritScott Murray2-14/+9
Update the poiapp and libnaviapi-agl recipes to point at AGL Gerrit for their source repositories. Additionally, the libnaviapi-agl recipe has been moved to recipes-demo/navigation since being beside its users seems to be a more logical location, and a few lines have been reordered in the poiapp recipe to better match the OpenEmbedded style guide. Bug-AGL: SPEC-2787 Change-Id: I41334b47b4970adb51fc943368dba7e07bbf113d Signed-off-by: Scott Murray <scott.murray@konsulko.com> (cherry picked from commit 8c8455f86f6ee8e9a40d163b260b60aea250b297)
2019-09-09packagegroups: graphics: add noto-emoji to packagegroupMatt Ranostay1-0/+1
Bug-AGL: SPEC-2701 Change-Id: I5be0a1fb5a78737090970741bf52390b4102c341 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> (cherry picked from commit 63d61630c728adaa3465c8f319e586a765d9804b)
2019-09-07graphics: add noto-emoji git recipeMatt Ranostay1-0/+25
Add color emoji support to AGL via the noto-emoji font. Bug-AGL: SPEC-2701 Change-Id: Idf21d5c3f8ac2fe0fe25945b6dca1d8956fb7f7b Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> (cherry picked from commit c0a8b9e819a2ca473aabb91feac9833f0397e8c3)
2019-09-02Update demo features for switch to ondemandnavihalibut_8.0.1halibut/8.0.18.0.1Scott Murray5-45/+34
The ondemandnavi navigation application does not work with the mapviewer cluster demo application, so update the logic to handle the agl-cluster-demo-support feature in packagegroup-agl-demo-platform to not pull it in when using ondemandnavi as the virtual/navigation provider. Since the plan is to replace mapviewer with an equivalent QtLocation based map streamer for the cluster demo, the mapviewer-demo recipe has also been replaced with a more generically named cluster-demo-network-config recipe. Additionally, the agl-demo-preload feature logic has been tweaked to not pull in the map package for the old navigation application when using ondemandnavi. Bug-AGL: SPEC-2576 Change-Id: I57b45ab152f9fab6cee97d570be1949136cd39eb Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-08-20qtlocation: Fix unstable rotation using pinch zoomHarunobu Kurokawa2-0/+35
This patch is merged in 5.11 branch, however it was not in 5.11.3. https://codereview.qt-project.org/c/qt/qtlocation/+/244889 Bug-AGL: SPEC-2709 Change-Id: I90a914b1a1fd21b1a181a50749ed91e90960021d Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com> Signed-off-by: Scott Murray <scott.murray@konsulko.com> (cherry picked from commit 4fccf34ac71bd65d10d74c0b00446c4a6d40043f)
2019-07-31ondemandnavi: Update recipe SRC_URI and HOMEPAGEhalibut_8.0.0halibut/8.0.08.0.0Scott Murray3-81/+25
Update recipe SRC_URI and HOMEPAGE to point at the new repository on AGL Gerrit, and remove the local patches that have now been merged there. As well, the recipe has been reformatted to more closely match the OpenEmbedded style guide and match those of the other demo applications. Bug-AGL: SPEC-2667 Change-Id: Ie771a2ea8e6236a5995dbb9c2b9d64cfbe30e89c Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-07-27navigation: Switch to pipewire outputScott Murray2-10/+9
Update patch for the navigation app's talk scripts to use the gstreamer pipewire output sink, and set the media role stream property appropriately. Bug-AGL: SPEC-2634 Change-Id: Ibb1e588688be8af9eff9c8e3efa1ca4983920df7 Signed-off-by: Scott Murray <scott.murray@konsulko.com> (cherry picked from commit 6f3f6139089e2f283b785bb31a222e1290d12eb0)
2019-07-25Update .gitreview for halibut branchJan-Simon Möller1-0/+1
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Change-Id: Id21f0e1105d11d6a56fe36571fd0428d62d3319d
2019-07-24recipes-demo-hmi: libqtappfw: update SRCREVRaquel Medina1-1/+1
617d8b network: use roles to signal model changes Bug-AGL: SPEC-2339 Change-Id: Ica698d4dc0a81b6469879fb88c4098c054e85547 Signed-off-by: Raquel Medina <raquel.medina@konsulko.com>
2019-07-24add markdown documentation for all machines and featuresStéphane Desneux5-0/+69
THIS IS STILL WIP - not all features/machines are described Bug-AGL: SPEC-1902 Change-Id: Ibe5b4afe039a65594bb30e0fc0ecedb1f4539de4 Signed-off-by: Stéphane Desneux <stephane.desneux@iot.bzh>
2019-07-22recipes-demo-hmi: libqtappfw: update SRCREVRaquel Medina1-1/+1
61d0147 libqtappfw: network: improve error checks Bug-AGL: SPEC-2636 Change-Id: Ia14b90ed757458227d2a5459f6fee3abbe8b6ed1 Signed-off-by: Raquel Medina <raquel.medina@konsulko.com>