| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Changes:
- Move KVM demo configuration and image recipes to a new sub-layer,
meta-agl-kvm-demo, to keep things that may not be buildable with
just the agl-demo feature separate to avoid confusion. It will
hopefully also avoid clutter in recipes-platform/images.
This sub-layer is pulled in when the agl-kvm setup feature is
given to aglsetup.sh.
- Remove the agl-kvm-host-kuksa and agl-kvm-host-audio setup
features.
- Add new *-guest and *-guest-preconfigured flavors of the Flutter
IVI and IC images under meta-agl-kvm-demo that that have the
desired configuration changes baked in.
- Add required qemu-config recipe variants for the new guest image
flavors. At the moment there is more duplication of configuration
for this than is desired, and some reworking of agl-qemu-runner
configuration may come as a follow up to avoid this.
- Remove qemu-config recipe variants for unused Qt guest images.
If it becomes desirable to use the Qt demo images as guests this
can be revisited.
- Added agl-kvm-demo-flutter-preconfigured image variant that
supports the full demo setup (i.e. "green machine" with steering
wheel, equivalent to CES 2024 demos).
NOTES:
- The agl-kvm-demo image remains and builds roughly the same image
as before, with the KUKSA.val databroker running in the IVI guest
and cluster support enabled. Replacing this image with a bbclass
abstraction and an e.g. agl-kvm-demo-flutter image is under
consideration.
Bug-AGL: SPEC-5138
Change-Id: I64936208fd032e5ba47366e3a7ff572dc18338e4
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29905
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Rename the demo images to align with the following scheme:
agl-<ivi|cluster|etc>-<image|demo>-<qt|flutter|etc>(-<crosssdk|preconfigured>)
The intent is to make the naming more consistent in preparation for
switching to preconfigured images as a replacement for the existing
agl-demo-preload, agl-demo-cluster-support, agl-kvm-host-* aglsetup.sh
features.
Additionally, the prototype LXC demo image support has been removed
as it is unused and would need updating for these and upcoming
changes.
Bug-AGL: SPEC-5138
Change-Id: I8d907713b09eb47c3cb0ebd5326ab063b2684ea2
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29903
Reviewed-by: Naoto YAMAGUCHI <naoto.yamaguchi@aisin.co.jp>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Changes:
- Fix native-shell-client systemd unit to work with the changes
made for SPEC-4714 (separate agl-compositor systemd unit,
running as agl-driver).
- Update agl-qemu-runner.sh for the SPEC-4714 changes.
- Tweak cluster guest configuration to use just 2 cores and 1 GB
of memory to free up resources for the host.
- Add inverted psplash configuration that is pulled in for the
KVM demo image when building with agl-demo-preload. This
matches the inverted screen in the demo hardware.
Bug-AGL: SPEC-4974
Change-Id: Ie57a3550c8c8b12fd64ee14a9f1fbf4a4c40da32
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29460
ci-image-boot-test: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
|
|
Remove the use of systemd user session to align with how upstream
runs Weston, and to allow using all systemd sandboxing features with
the compositor and homescreen, launcher, etc. applications. The
changes for this touched enough packagegroups and images that further
rework was done to address some of the cleanup described in SPEC-4813,
see below for details.
Changes:
- Rework systemd units and recipes of affected applications.
- Rework images to pull in image .bb files instead of .inc files.
- Pull in the new agl-image-compositor as a base image where
appropriate.
- Update weston-terminal-conf recipe to use new split out
weston-terminal package.
- Use new agl-crosssdk bbclass where appropriate.
- Pull some local common cross-SDK additions into a new
agl-ivi-crosssdk.inc include file and use as appropriate. Note
that this does have a side effect of likely correcting the contents
of agl-image-ivi-crosssdk for some recent additions.
- Remove flutter-gallery bbappend that turned it into an app, as we
are not using it in images, have other examples now, and it seems
better to not affect the contents of agl-image-flutter.
- Remove unused agl-image-graphical-html5. If a downstream user does
desire an image with Chromium+WAM without applications, restoring it
can be considered.
- Remove unused agl-image-graphical-qt5-crosssdk.
- Remove all packagegroup-agl-profile-* packagegroups, as they were
either empty or not providing value at this point. Any future plans
for defining profiles can start from a clean sheet.
- Added new packagegroup-agl-ivi-multimedia-hardware to hold some
rcar3 specific additions (via override) that were previously being
appended onto packagegroup-agl-graphical-multimedia even though
they are machine-specific and that packagegroup is not. This may
be a stopgap solution if the agl-ivi-* packagegroups are reworked
further.
- Replace some :append usage with += to avoid creating problems
for downstream users.
Bug-AGL: SPEC-4714, SPEC-4813
Change-Id: I544b1495bed1e2e2412a8e46b7d20d7622ec28c9
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
In container integration case, a common group between host
and guest shall use static groups. AGL Demo IVI run
agl-compositor using agl-driver user and group.
The agl-driver doesn't have input group.
This patch add agl-driver to input group.
Bug-AGL: SPEC-4766
Change-Id: Ibe5cec7127f967890ddded4e45e2097d920fbfdd
Signed-off-by: Naoto Yamaguchi <naoto.yamaguchi@aisin.co.jp>
|
|
When existing agl demo integrate to container guest, need
to remove real tty device dependency.
This patch remove tty device dependency from agl-session
in case of container guest.
Bug-AGL: SPEC-4766
Change-Id: I5fc88d19554b659271a74858fb588a9aaa9b13f6
Signed-off-by: Naoto Yamaguchi <naoto.yamaguchi@aisin.co.jp>
|
|
Changes:
- Tweak agl-qemu-runner to make CAN options configurable.
- Update the IVI guest image agl-qemu-runner configurations to
enable an emulated PCI CAN device mapped to the host can0.
- Update the IVI guest image agl-qemu-runner configurations to
change the input device to a USB passthrough corresponding to
the bottom USB 2.0 connector of the 2x stack on the reference
hardware, so that a USB touchscreen can be used for demos.
Bug-AGL: SPEC-4618
Change-Id: I6b690377f5fe0a481e283d7370cbb165478ee8eb
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
(cherry picked from commit 0eb0e7ad872bc03cbc8af5c95bfe0219ebf06bfd)
|
|
Changes:
- Tweak agl-qemu-runner to make network options configurable.
- Add qemu-config-vmnet0 recipe that installs the required
configuration files to set up a vmnet0 bridge device for QEMU to
add the guests to, and to run dnsmasq against it to provide set
IPs (in 172.16.10.0/8) to known MAC addresses that can be used to
get the IVI and IC guests at stable IP addresses.
- As part of the above, disable connman DNS proxying to avoid
conflicting with dnsmasq. This does mean this package should
only be used for simple host images where applications can live
with less dynamic DNS configuration behavior.
- Update the various guest configuration files for agl-qemu-runner
to set the new QEMU_NET_OPT variable as required.
Bug-AGL: SPEC-4618
Change-Id: I81d2ea9f0605a8bca7ac17d6e8f33c0b1a9f2c46
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
(cherry picked from commit 0219e6547b627f45936599fa54e02cad27dee4f4)
|
|
Changes:
- Rename cluster-dashboard-demo-config to cluster-demo-config since
the installed AGL.conf will also be used for receiver configuration
now.
- Add a Flutter cluster version of AGL.conf that configures the
receiver window geometry as required. The alternative mechanism
is used to generate separate packages with the different AGL.conf
files.
- Update the package names installed by agl-demo-preload in the Qt
and Flutter cluster demo images.
It may make sense to do further rework in the dashboard and receiver
apps post-CES to split things into separate configuration files, but
this seems the most straightforward way to do things for now.
Bug-AGL: SPEC-4640
Change-Id: If8a65228c75f28a53ef32a49be90f75a85d60a16
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Add recipes for agl-qemu-runner.sh QEMU wrapper script and template
systemd unit, and guest per-image configuration files and systemd
unit links for the various demo platform images. The configurations
for the demo images can be mixed and matched somewhat, but only one
each of IVI and cluster should be used, as there are some static CPU
assignments in the configurations. As well, this has only been
tested on the AGL reference hardware at present, some rework will
likely be required to support other platforms.
There is room to add a bbclass to simplify the guest configuration
recipes, but that has not been done for now as this approach may be
temporary; a switch to libvirtd with appropriate configurations is
likely.
Bug-AGL: SPEC-4618
Change-Id: Ieefbd4081cca506f915957cc313411a5ed1ece5c
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Rework the agl-ivi-demo-platform* images to reduce duplication,
and move the additions for the agl-demo-cluster-support and
agl-demo-preload features.
Changes:
- Pull in agl-image-ivi.bb in the crosssdk image rather than
duplicating its contents. This means the package additions
from the demo features will be reflected in the SDK, which
seems more in line with general expectations of how Yocto SDKs
work.
- New packagegroups are created for the agl-demo-cluster-support
and agl-demo-preload features, and they are pulled into the
agl-ivi-demo-platform / agl-demo-platform image using features
in IMAGE_FEATURES. This avoids changing the contents of various
packagegroups based on AGL_FEATURES and seems more futureproof
with respect to binary packaging.
- ALLOW_EMPTY has been removed in a few packagegroup recipes, as
it does not seem to make sense if the packagegroup will never
be empty.
- The cluster-dashboard-demo-config recipe pulled into the
agl-demo-cluster-support packagegroup has been added back, it
was accidentally removed in the application framework cleanup.
Bug-AGL: SPEC-4424
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Icaa38651a1d29de09bb40576c773e3f93ee87098
|
|
Changes:
- Restore the image recipes for the agl-cluster-demo-platform and
agl-telematics-demo-platform images, with updates to them and
their associated packagegroups for the app framework removal.
- Restore updated recipes required for the above, including:
* cluster-dashboard
* cluster-receiver
* qt-cluster-receiver
* tbtnavi
- Simple systemd unit files have been added for the cluster
applications and are installed as user session units. Starting
of cluster-dashboard (the XDG version) and cluster-receiver in
the AGL user session is enabled by default.
- The recipes to install the dedicated network configuration for
the cluster demo have been restored so that the
agl-cluster-demo-support and agl-demo-preload features will do
what is expected again.
Known outstanding issues:
- The previous signal-composer binding support has been removed
from cluster-dashboard, so related functionality (i.e. driving
it from CAN) is disabled until replacement is worked out.
- While tbtnavi builds, the previous use of the navigation binding
is stubbed out in libqtappfw, so it will not receive location
and route information from ondemandnavi.
- Nothing has been added yet to start tbtnavi in the AGL user
session, the plan is to do so with a systemd user unit once a
new mechanism for controlling it from ondemandnavi has been
implemented.
- The telematics-recorder application has not yet been updated
to replace its signal-composer, gps, and network binding use.
The intent is to address these issues in the 13.0.x point releases.
Bug-AGL: SPEC-4283
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I520c23775b21504cb7dd92538319cc5bf826ff64
|
|
Remove unused agl-users recipe as attempting to use it now would
conflict with the agl-driver user definition in the new agl-session
recipe.
Bug-AGL: SPEC-4161
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ifdded99fdec297379e0454bd26aaef8133f11d51
|
|
The "display" user has effectively been replaced with a "weston"
user in the new weston-init support for running as non-root from
upstream Yocto, so remove creation of it from the agl-users recipe.
If the agl-users recipe will be retained in the new application
scheme, this cleanup is required.
Bug-AGL: SPEC-4121
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Iafd7a08dfd7ba3514ef4264c68d697cfd9790047
|
|
During the last workshop the transition to the new framework was presented.
This change essentially deprecates the SMACK-based application framework.
To prepare the integration of it, we remove the deprecated components:
- recipes-apis : all agl-service-*
- recipes-demos: all demo apps but homescreen
- non-essential configurations
Todo:
We need to bring-back the html5 image in a follow-up w/o ties into the old framework.
v2: kept WAM + Chromium recipes for reference
v3: rebased
Bug-AGL: SPEC-4121
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I58075f5f1e477106a1aad3d2171a0904bf0cb16e
|
|
This is the result of running a slightly customized version of the
convert-overrides.py script from poky with additional overrides
added.
The intent of these changes is to minimize the effort to keep the
"next" branch that builds against poky master up to date and tested
in preparation for the switch to the next Yocto LTS release in
early 2022.
Bug-AGL: SPEC-4052
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I6eeadd2c985c008b04f8f9815bf0f6fb064bedac
|
|
Upstream has renamed the common license files, but investigation
revealed that the LICENSE on this purely configuration recipe
should likely be MIT to be consistent with the other similar
recipes in the tree, so update both LICENSE and LIC_CHKSUM_FILE
to fix both issues. As well, now that the demo repositories
are merged, this recipe can just RDEPEND on simple-can-simulator,
rather than duplicating it.
Bug-AGL: SPEC-3819
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I2302e904258a67d3c2a1756f94d247e3779106f0
|
|
Upstream has renamed the common license files, but investigation
revealed that the LICENSE on this purely configuration recipe
should likely be MIT to be consistent with the other similar
recipes in the tree, so update both LICENSE and LIC_CHKSUM_FILE
to fix both issues.
Bug-AGL: SPEC-3819
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I82b6c44aa1d09008a9915250f111c93e6b9de02c
|
|
Add a dev-mapping-ci recipe that installs a CI specific version of
/etc/dev-mapping.conf for the agl-service-can-low-level binding.
Additionally, the dev-mapping-demo recipe files have been moved to
recipes-config/dev-mapping so all the dev-mapping* recipes are in
the same place, and the now required "j1939" bus mapping has been
added to the various dev-mapping files.
To enable use of the new recipe, a definition of the variable
PREFERRED_RPROVIDER_virtual/low-can-dev-mapping has been added to
the agl-demo feature definition that enables it based on the AGLCI
DISTRO_FEATURE. This is intended to replace the definition in
poky-agl.conf, which will be removed in subsequent cleanup.
Bug-AGL: SPEC-3756
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ieb80a7f4b76ddd7851acca521dea1a8dd104cf86
|
|
All demo related components should be in here now.
We keep the packagegroups on purpose for now to stay backward-compatible.
v2: layer does pass yocto-check-layer, dependencies adapted
v3: remove the dynamic-layer setup, use all-in-one approach
v4: Fixed comments from Paul Barker. Tnx!
v5: Removed wayland/weston/agl-compositor additions, except for demo
specific weston-init bbappend
Follow-up changes required later:
- massaging packagegroups
- scrub of recipes
Bug-AGL: SPEC-3723
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I47cefd8c23d46b2cdd063470e3f7d97d5ad952d8
|
|
Changes:
- Add a can-dev-mapping-helper.sh script and systemd unit to drive
it, the script checks if the CAN devices specified in the low-can
configuration file /etc/dev-mapping.conf exist, and if not brings
up corresponding virtual CAN devices.
- Add a systemd over-ride conf file for agl-service-can-low-level
that makes can-dev-mapping-helper a dependency. This should ensure
that the low-can binding always starts even if there are no physical
CAN hardware devices.
- Added a Before statement to sllin-demo.service to ensure that it
will run before can-dev-mapping-helper and ensure that lin_config
can create sllin0 correctly.
- Removed the sllin-demo-virtual systemd unit, as it will no longer
be required with can-dev-mapping-helper.
- Updated the /var/run paths in sllin-demo.service and associated
start_lin_demo.sh script to quiet systemd warnings about /var/run
usage.
Bug-AGL: SPEC-3540
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ife02f75f57ac7bbdee6b02217e2ab657fe8c36e0
|
|
Changes include:
- Rework cluster-demo-network-config recipe to have the installed
service file be a template, allowing the recipe to potentially
change the target network device easily. A new variable
AGL_CLUSTER_NET_DEVICE has been added to do so, with a default
value of eth1. The interface configuration has been moved to a
helper shell script, cluster-demo-network-conf.sh, with some
additional logic added to update the interface blacklist in the
connman configuration. This makes things more generic and allows
setting up the cluster demo on boards other than H3+KF.
- Update agl-cluster-demo-support feature dependency with new
agl-weston-remoting feature that replaces agl-gstrecorder.
Bug-AGL: SPEC-3395
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I9109b8e7782112d5504866f67e6bb5953c79d4a8
|
|
The cluster-demo-simulator is a small python script that sends can messages
to simulate speed and rpm. It has support for steering wheel events.
Bug-AGL: SPEC-3090
.
Change-Id: I45bf259c984c59912a674a57ccc642a1917a3209
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
(cherry picked from commit b0620c288705d14aadb9cdd95e47b8b22dc7662a)
|
|
Rework the agl-demo-preload feature to specify a new demo-specific
PREFERRED_RPROVIDER for the new virtual/low-can-dev-mapping virtual
package. This enables using the sllin0 interface on the CES demo
setup as the low-speed interface.
Bug-AGL: SPEC-3076
Change-Id: I872137d8acb1f5ec5df9eac92f25953b28128b36
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
To enable seeing the steering wheel LIN messages on the cluster board
for the planned CES demo, a systemd unit that wraps the use of candump
in bridging mode is added when the agl-cluster-support feature is
enabled. To make sure that the sllin0 interface is always available
for testing without the specific demo LIN hardware, a vcan interface
is set up as sllin0 when the ttyUSB0 device representing the serial
adapter for the LIN transceiver is not present. Since this virtual
sllin0 interface is very useful for general testing of the steering
wheel event support up through the low-can and signal-composer stack,
it has not been hidden behind agl-cluster-demo-support.
Bug-AGL: SPEC-3049
Change-Id: Idb478e3fe4085859e8704ab0329a341b1a11e0ef
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
- adopt driver configuration to provide 2 'mono' ALSA
capture devices
Bug-AGL: SPEC-2953
Signed-off-by: Tobias Jahnke <tobias.jahnke@microchip.com>
Change-Id: Iff5138828dd192cd9370b2ac1ab17c7fc3db208b
|
|
The ondemandnavi navigation application does not work with the
mapviewer cluster demo application, so update the logic to handle
the agl-cluster-demo-support feature in packagegroup-agl-demo-platform
to not pull it in when using ondemandnavi as the virtual/navigation
provider. Since the plan is to replace mapviewer with an equivalent
QtLocation based map streamer for the cluster demo, the mapviewer-demo
recipe has also been replaced with a more generically named
cluster-demo-network-config recipe. Additionally, the agl-demo-preload
feature logic has been tweaked to not pull in the map package for the
old navigation application when using ondemandnavi.
Bug-AGL: SPEC-2576
Change-Id: I57b45ab152f9fab6cee97d570be1949136cd39eb
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Install a udev rules file in the unicens-config recipe to set the
group and SMACK label on the inic character devices so they are
accessible by services with the new audio permission.
Bug-AGL: SPEC-2591
Change-Id: I52135cf62ca8bfab0badd8850d49639d86ed73c1
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
The user 'agl-driver' has the uid 1001.
The objective is to make him the user of the
homescreen.
Bug-AGL: SPEC-1016
Change-Id: I02d8a0adb3877166727172629c46aa728aa56416
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
|
|
configuration file
This patch adds the configuration for an additional ALSA sound card to the
MOST driver configuration file. It is needed to have another capture device
registered with ALSA.
Change-Id: I9c458448c80bef47d61831157c1b80ce1a7a9848
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
|
|
This patch adds a capture device to the MOST sound configuration.
Is is needed to have the kernel driver register another sound card
with the ALSA subsystem.
Change-Id: I6406c40a788251e860768acce3c886b395e95ce0
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
|
|
This patch replaces the default.target with the multi-user.target to ensure
that the unit is being executed by systemd.
Change-Id: I3d696eb88052be63c82bd11434fd338371deb38d
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
|
|
Fixes
QA Issue: /usr/bin/unicens-config.sh contained in package unicens-config
requires /bin/bash , but no providers found in RDEPENDS_unicens-config?
[file-rdeps]
Bug-AGL: SPEC-1181
Change-Id: I6d7ec9487d22c05ce531b38f997d376ae24d8863
Signed-off-by: Changhyeok Bae <changhyeok.bae@gmail.com>
|
|
This patch sets the type of the unicens-config.service file to oneshot.
It is needed to ensure a proper initialization of the system on an SMP
machine.
Change-Id: I4bb74157efe1d4a9ce86d29135af6898eefa30d1
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
|
|
This patch updates the shell script that is used to configure the
discovered MOST devices. It is needed because current configuration
vectors don't match the attached device interfaces
Change-Id: I6618a619bc0c1e1332ba91100da1c5e8135c1d72
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
|
|
Adapt to changes in AGL that now handles user by number,
just numbers.
Change-Id: Ia01ee46e7db8d3bcd5ce43a34f7ba9ba5bc2f3f9
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
|
|
This patch is needed to fix the driver configuration script which mixes up
the channel settings.
Change-Id: I0a83a8b9b6de68fc509b75728f28e71e4ebf2feb
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
|
|
This patch changes the permission of the file unicens-config.service to
644. It is needed because an executable service file is considered a
security risk. This patch fixes JIRA SPEC-1137.
Change-Id: Idab5080450be358b5775ce4dbb1737f2bcd34a5f
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Reported-by: Dominig Ar Foll <dominig.arfoll@fridu.net>
|
|
This patch adds the necessary files to have the MOST driver
configured for UNICENS2 at system start up.
Change-Id: I9a69192332d355a3f9d3df3771cd364771e8eb9a
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
|
|
Bug-AGL: SPEC-546
Change-Id: I2ddc07547f9f2afd724feda80a80f65e890ebcf5
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
Scott Murray
Naoto Yamaguchi
Jan-Simon Möller
Tobias Jahnke
José Bollo
Christian Gromm
Changhyeok Bae
Ronan Le Martret