| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Changes:
- Add recipe for AGL VSS to MQTT proxy daemon
- Update agl-vcar.dbc CAN database definition to add signals useful
for demoing the proxy (per V2C EG discussion).
- Add a patch to kuksa-dbc-feeder to allow sensor signal updates to
generate CAN messages in output mode.
- Add VSS vspec variants to define the desired CAN input and output
support for the various kuksa-dbc-feeder instances in the default
and full gateway demos.
- Add configurations for kuksa-dbc-feeder for the running the default
gateway demo with CAN output from a demo control panel instance on
a single CAN interface, as well as a fuller setup with a second
kuksa-dbc-feeder running against a second CAN interface on the
gateway to handle the demo steering wheel and HVAC support.
- Add gateway demo specific configuration files for various KUKSA.val
databroker clients to override the databroker location.
- Add agl-gateway-demo and agl-gateway-demo-preconfigured images for
the default and full demos.
- Add *-preconfigured-gateway image flavors for the Flutter IVI, IC,
and KVM demo images that support running with the databroker on
the gateway.
NOTES:
- The *-preconfigured-gateway images assume the gateway has an IP
address of 192.168.10.4.
- Required changes to the agl-demo-control-panel application and the
addition of a agl-ivi-demo-control-panel-preconfigured-gateway
image will come in a subsequent change.
Bug-AGL: SPEC-5107, SPEC-5138
Change-Id: I9797aa72737af7af3d791a5151198f80b6d90e0d
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29921
ci-image-boot-test: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
Tested-by: Jenkins Job builder account
|
|
Changes:
- Add agl-kvm-host-audio feature for configuring other changes.
- Make installation of packagegroup-agl-ivi-service-platform in the
KVM host versus IVI images dependent on the agl-kvm-host-audio
feature. Some recipe dependencies are tweaked by the feature
being specified to avoid accidentally pulling things into the
IVI guest images.
- Add KVM demo specific configuration for applications affected by
running the databroker on the host versus in the IVI guest, and
use it if the agl-kvm-host-kuksa feature is enabled.
Bug-AGL: SPEC-5082
Change-Id: I3a6e6216a90e4d260c20f0b048e6332466aef4ff
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29702
ci-image-boot-test: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
|
|
Changes to switch the Qt-based agl-demo-platform demo from using
the older KUKSA.val server to the new gRPC based databroker. The
Flutter demo's vehicle signalling behavior ends up a bit broken
by these, but the image still boots and basic things still work.
A follow on set of changes will convert the Flutter apps to the
new gRPC API and remove the KUKSA.val server completely.
Notable changes:
- Updated libqtappfw, homescreen, ondemandnavi, and tbtnavi recipes
to pick up changes to switch to using the databroker.
- Updated agl-service-audiomixer and agl-service-hvac recipes to
pick up their rework for using the databroker.
- All the Qt demo applications that use the VehicleSignals class
from libqtappfw have had their .conf and .token files updated to
work with the databroker. As well, the JSON files used to create
the new app-specific authorization tokens have been checked in to
provide a reference of how things are configured.
- The DBC feeder configuration has been changed to push into the
databroker. Having a duplicate instance to also push into the
older server has not been set up, as hopefully the Flutter demo
conversion will follow on quickly enough to not require it.
- Packagegroups for the KUKSA.val server and databroker have been
factored out and are used instead of using the agl-ivi-services
packagegroup.
- kuksa-databroker-cli and the simple CAN simulator script are now
included into the demo images when building with agl-devel.
Bug-AGL: SPEC-4762
Change-Id: I416bcfbf961535062043ef54acdea6c353f84af1
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29171
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Remove the use of systemd user session to align with how upstream
runs Weston, and to allow using all systemd sandboxing features with
the compositor and homescreen, launcher, etc. applications. The
changes for this touched enough packagegroups and images that further
rework was done to address some of the cleanup described in SPEC-4813,
see below for details.
Changes:
- Rework systemd units and recipes of affected applications.
- Rework images to pull in image .bb files instead of .inc files.
- Pull in the new agl-image-compositor as a base image where
appropriate.
- Update weston-terminal-conf recipe to use new split out
weston-terminal package.
- Use new agl-crosssdk bbclass where appropriate.
- Pull some local common cross-SDK additions into a new
agl-ivi-crosssdk.inc include file and use as appropriate. Note
that this does have a side effect of likely correcting the contents
of agl-image-ivi-crosssdk for some recent additions.
- Remove flutter-gallery bbappend that turned it into an app, as we
are not using it in images, have other examples now, and it seems
better to not affect the contents of agl-image-flutter.
- Remove unused agl-image-graphical-html5. If a downstream user does
desire an image with Chromium+WAM without applications, restoring it
can be considered.
- Remove unused agl-image-graphical-qt5-crosssdk.
- Remove all packagegroup-agl-profile-* packagegroups, as they were
either empty or not providing value at this point. Any future plans
for defining profiles can start from a clean sheet.
- Added new packagegroup-agl-ivi-multimedia-hardware to hold some
rcar3 specific additions (via override) that were previously being
appended onto packagegroup-agl-graphical-multimedia even though
they are machine-specific and that packagegroup is not. This may
be a stopgap solution if the agl-ivi-* packagegroups are reworked
further.
- Replace some :append usage with += to avoid creating problems
for downstream users.
Bug-AGL: SPEC-4714, SPEC-4813
Change-Id: I544b1495bed1e2e2412a8e46b7d20d7622ec28c9
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Update the recipes for the Qt demo applications that were previously
using signal-composer either directly or indirectly to work with the
new VehicleSignals API in libqtappfw. For most of them this means
updating their SRCREV to pick up the application changes, and
installing the new configuration file and associated JSON web token
file for KUKSA.val authorization. At present all the apps are using
one of the default read-write tokens from the KUKSA.val install, but
ideally this will end up migrated to app specific tokens with
appropriate permissions JSON down the road, potentially obtained
via OAuth or similar mechanism.
Additionally, the tbtnavi recipe has been updated to install a
systemd unit to start it at boot.
Bug-AGL: SPEC-4409, SPEC-4426
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I46be098fc31be02852e7888ba0ffd14674efa12b
|
Scott Murray