summaryrefslogtreecommitdiffstats
path: root/recipes-demo/navigation/tbtnavi
AgeCommit message (Collapse)AuthorFilesLines
2024-05-27Add gateway demoScott Murray1-0/+4
Changes: - Add recipe for AGL VSS to MQTT proxy daemon - Update agl-vcar.dbc CAN database definition to add signals useful for demoing the proxy (per V2C EG discussion). - Add a patch to kuksa-dbc-feeder to allow sensor signal updates to generate CAN messages in output mode. - Add VSS vspec variants to define the desired CAN input and output support for the various kuksa-dbc-feeder instances in the default and full gateway demos. - Add configurations for kuksa-dbc-feeder for the running the default gateway demo with CAN output from a demo control panel instance on a single CAN interface, as well as a fuller setup with a second kuksa-dbc-feeder running against a second CAN interface on the gateway to handle the demo steering wheel and HVAC support. - Add gateway demo specific configuration files for various KUKSA.val databroker clients to override the databroker location. - Add agl-gateway-demo and agl-gateway-demo-preconfigured images for the default and full demos. - Add *-preconfigured-gateway image flavors for the Flutter IVI, IC, and KVM demo images that support running with the databroker on the gateway. NOTES: - The *-preconfigured-gateway images assume the gateway has an IP address of 192.168.10.4. - Required changes to the agl-demo-control-panel application and the addition of a agl-ivi-demo-control-panel-preconfigured-gateway image will come in a subsequent change. Bug-AGL: SPEC-5107, SPEC-5138 Change-Id: I9797aa72737af7af3d791a5151198f80b6d90e0d Signed-off-by: Scott Murray <scott.murray@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29921 ci-image-boot-test: Jenkins Job builder account ci-image-build: Jenkins Job builder account Tested-by: Jenkins Job builder account
2024-03-08Enable running audio services on host for KVM demoScott Murray2-0/+7
Changes: - Add agl-kvm-host-audio feature for configuring other changes. - Make installation of packagegroup-agl-ivi-service-platform in the KVM host versus IVI images dependent on the agl-kvm-host-audio feature. Some recipe dependencies are tweaked by the feature being specified to avoid accidentally pulling things into the IVI guest images. - Add KVM demo specific configuration for applications affected by running the databroker on the host versus in the IVI guest, and use it if the agl-kvm-host-kuksa feature is enabled. Bug-AGL: SPEC-5082 Change-Id: I3a6e6216a90e4d260c20f0b048e6332466aef4ff Signed-off-by: Scott Murray <scott.murray@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29702 ci-image-boot-test: Jenkins Job builder account ci-image-build: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jenkins Job builder account
2023-08-28Switch Qt demo to KUKSA.val databrokerScott Murray3-2/+12
Changes to switch the Qt-based agl-demo-platform demo from using the older KUKSA.val server to the new gRPC based databroker. The Flutter demo's vehicle signalling behavior ends up a bit broken by these, but the image still boots and basic things still work. A follow on set of changes will convert the Flutter apps to the new gRPC API and remove the KUKSA.val server completely. Notable changes: - Updated libqtappfw, homescreen, ondemandnavi, and tbtnavi recipes to pick up changes to switch to using the databroker. - Updated agl-service-audiomixer and agl-service-hvac recipes to pick up their rework for using the databroker. - All the Qt demo applications that use the VehicleSignals class from libqtappfw have had their .conf and .token files updated to work with the databroker. As well, the JSON files used to create the new app-specific authorization tokens have been checked in to provide a reference of how things are configured. - The DBC feeder configuration has been changed to push into the databroker. Having a duplicate instance to also push into the older server has not been set up, as hopefully the Flutter demo conversion will follow on quickly enough to not require it. - Packagegroups for the KUKSA.val server and databroker have been factored out and are used instead of using the agl-ivi-services packagegroup. - kuksa-databroker-cli and the simple CAN simulator script are now included into the demo images when building with agl-devel. Bug-AGL: SPEC-4762 Change-Id: I416bcfbf961535062043ef54acdea6c353f84af1 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29171 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2023-06-07Remove systemd user session and clean up packagegroups and imagespike_15.91.0pike/15.91.015.91.0Scott Murray1-1/+3
Remove the use of systemd user session to align with how upstream runs Weston, and to allow using all systemd sandboxing features with the compositor and homescreen, launcher, etc. applications. The changes for this touched enough packagegroups and images that further rework was done to address some of the cleanup described in SPEC-4813, see below for details. Changes: - Rework systemd units and recipes of affected applications. - Rework images to pull in image .bb files instead of .inc files. - Pull in the new agl-image-compositor as a base image where appropriate. - Update weston-terminal-conf recipe to use new split out weston-terminal package. - Use new agl-crosssdk bbclass where appropriate. - Pull some local common cross-SDK additions into a new agl-ivi-crosssdk.inc include file and use as appropriate. Note that this does have a side effect of likely correcting the contents of agl-image-ivi-crosssdk for some recent additions. - Remove flutter-gallery bbappend that turned it into an app, as we are not using it in images, have other examples now, and it seems better to not affect the contents of agl-image-flutter. - Remove unused agl-image-graphical-html5. If a downstream user does desire an image with Chromium+WAM without applications, restoring it can be considered. - Remove unused agl-image-graphical-qt5-crosssdk. - Remove all packagegroup-agl-profile-* packagegroups, as they were either empty or not providing value at this point. Any future plans for defining profiles can start from a clean sheet. - Added new packagegroup-agl-ivi-multimedia-hardware to hold some rcar3 specific additions (via override) that were previously being appended onto packagegroup-agl-graphical-multimedia even though they are machine-specific and that packagegroup is not. This may be a stopgap solution if the agl-ivi-* packagegroups are reworked further. - Replace some :append usage with += to avoid creating problems for downstream users. Bug-AGL: SPEC-4714, SPEC-4813 Change-Id: I544b1495bed1e2e2412a8e46b7d20d7622ec28c9 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2022-07-06Update vehicle signal using app recipesScott Murray3-0/+14
Update the recipes for the Qt demo applications that were previously using signal-composer either directly or indirectly to work with the new VehicleSignals API in libqtappfw. For most of them this means updating their SRCREV to pick up the application changes, and installing the new configuration file and associated JSON web token file for KUKSA.val authorization. At present all the apps are using one of the default read-write tokens from the KUKSA.val install, but ideally this will end up migrated to app specific tokens with appropriate permissions JSON down the road, potentially obtained via OAuth or similar mechanism. Additionally, the tbtnavi recipe has been updated to install a systemd unit to start it at boot. Bug-AGL: SPEC-4409, SPEC-4426 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I46be098fc31be02852e7888ba0ffd14674efa12b