| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Changes:
- Remove the agl-demo-preload and agl-demo-cluster-support setup
features.
- Make the agl-weston-remoting setup feature a dependency of the
agl-demo feature. To accommodate this with respect to avoiding
putting the remote-output display configuration into generated
weston.ini files when not required, the logic for that has been
moved from meta-agl-core's weston-ini-conf recipe, and extra
weston-ini-conf-* packages with the remote output support enabled
are now generated to be used in images when required.
- Add *-preconfigured versions of the images useful in a full demo
setup (i.e. with "green machine" for tradeshows). These images
have the configuration tweaks that the build setup features
enabled with conditional logic baked in.
- Remove now unnecessary connman-conf bbappend, we now assume that
the IVI and cluster IP addresses are assigned as 192.168.10.2
and 192.168.10.3 via DHCP in a full demo setup.
Notes:
- The cluster support in the *-preconfigured images assumes that
the IVI board is at IP address 192.168.10.2, and both boards are
in the 192.168.10.x subnet.
Bug-AGL: SPEC-5138
Change-Id: Icc472c6b602fa8fa5570af6cb0acaef853cbfa0f
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29904
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
And add it meta-agl/mega-agl-core, like all our other ini configuration.
Reason being we group all our ini config files there, and this is
harmless, it won't depend on anything. We already build grpc-proxy
PACKAGECONFIG for agl-demo, starting with octopus.
This is basically a revert of 1b347d8823,
'[weston-ini-conf] Fix dependency issue with grpc in meta-agl-core'
Bug-AGL: SPEC-4776
Change-Id: I2502a3828d7c3a71707fac7cc535df6c312eabc5
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Scott Murray <scott.murray@konsulko.com>
|
|
grpc is not in the core layer but in meta-oe . Guard the dependency and only enable when
prerequisites are met. This also affects weston-ini-conf. We move this into meta-agl-demo.
Bug-AGL: SPEC-4707
Change-Id: Id7c1d88e94fa03b7933678789aef7ed4e5751148
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Add a canned weston.ini template and install it with the
appropriate guest VM app ids as weston-ini-conf-kvm.
The guest VM images/ids can be overriden with the variables
GUEST_VM1_IMAGE and GUEST_VM2_IMAGE (from e.g. site.conf).
Bug-AGL: SPEC-4618
Change-Id: I053a956fd5af78b13095f15b6e6c40e81a0ff0c9
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Main goal of this is to move the agl-service-* bindings into the core and to
unify common recipes like wayland/weston into meta-agl-profile-graphical.
As a placeholder for recipes is meta-agl-profile-demo which are being reshuffled.
TLDR: remove recipes from meta-agl-demo that were moved to other layers
Bug-AGL: SPEC-145 , SPEC-876 , SPEC-877
v2: moving updated udisks changes to meta-agl
Change-Id: I873107f00adadeb6f3f266cce37b513fe6d44cf2
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
In order to support IVI-Cluster demo, virtual display and
gst-recorder parameter are set in weston.ini.
If you want to use virtual output system, set "virtual-display"
in DISTRO_FEATURES. Then the sample value is enabled.
If you want to use transfer system to multi ECU via H.264,
set "gst-record" in DISTRO_FEATURES.
This feature is commited to DD[1]. After that he weston-ini-conf
is updated. This commit is same result as that time.
Note:
These system are supported in R-Car M3 and H3 only.
[1] https://gerrit.automotivelinux.org/gerrit/#/c/9907/
[2] https://gerrit.automotivelinux.org/gerrit/#/c/10847/
Change-Id: I1f7b9af5dc0e459aa49d336ed5ba0cebaf8adab2
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
|
Scott Murray
Marius Vlad
Jan-Simon Moeller
Harunobu Kurokawa