summaryrefslogtreecommitdiffstats
path: root/recipes-kernel/sllin/sllin.bb
AgeCommit message (Collapse)AuthorFilesLines
2021-08-20Convert to new override syntaxScott Murray1-7/+7
This is the result of running a slightly customized version of the convert-overrides.py script from poky with additional overrides added. The intent of these changes is to minimize the effort to keep the "next" branch that builds against poky master up to date and tested in preparation for the switch to the next Yocto LTS release in early 2022. Bug-AGL: SPEC-4052 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I6eeadd2c985c008b04f8f9815bf0f6fb064bedac
2021-03-02sllin: update LIC_CHKSUM_FILEScott Murray1-1/+1
Upstream has renamed the common license files, update LIC_CHKSUM_FILE to instead use the copyright header present in the source. Bug-AGL: SPEC-3819 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I339978508ce741f41ecfd0d8b509341639888ac7
2021-02-25sllin: add patch to enable building against newer kernelsScott Murray1-0/+1
Add patch to enable building the sllin driver against kernels 5.9 or newer. Bug-AGL: SPEC-3819 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Icb99773833a79f47af3e3287e6c62d64bb344f25
2020-08-19Add can-dev-mapping-helperjellyfish_9.99.3jellyfish/9.99.39.99.3Scott Murray1-7/+0
Changes: - Add a can-dev-mapping-helper.sh script and systemd unit to drive it, the script checks if the CAN devices specified in the low-can configuration file /etc/dev-mapping.conf exist, and if not brings up corresponding virtual CAN devices. - Add a systemd over-ride conf file for agl-service-can-low-level that makes can-dev-mapping-helper a dependency. This should ensure that the low-can binding always starts even if there are no physical CAN hardware devices. - Added a Before statement to sllin-demo.service to ensure that it will run before can-dev-mapping-helper and ensure that lin_config can create sllin0 correctly. - Removed the sllin-demo-virtual systemd unit, as it will no longer be required with can-dev-mapping-helper. - Updated the /var/run paths in sllin-demo.service and associated start_lin_demo.sh script to quiet systemd warnings about /var/run usage. Bug-AGL: SPEC-3540 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ife02f75f57ac7bbdee6b02217e2ab657fe8c36e0
2019-12-29Add virtual sllin support and LIN bridging to CAN for demosScott Murray1-0/+7
To enable seeing the steering wheel LIN messages on the cluster board for the planned CES demo, a systemd unit that wraps the use of candump in bridging mode is added when the agl-cluster-support feature is enabled. To make sure that the sllin0 interface is always available for testing without the specific demo LIN hardware, a vcan interface is set up as sllin0 when the ttyUSB0 device representing the serial adapter for the LIN transceiver is not present. Since this virtual sllin0 interface is very useful for general testing of the steering wheel event support up through the low-can and signal-composer stack, it has not been hidden behind agl-cluster-demo-support. Bug-AGL: SPEC-3049 Change-Id: Idb478e3fe4085859e8704ab0329a341b1a11e0ef Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-11-06Update LIN demo to use lin-configScott Murray1-1/+6
Changes include: - Add patch to fix lin-config recipe build QA error. - Tweak lin-config recipe to install lin_config as executable. - Rework sllin-demo systemd unit and start_lin_demo.sh script to use lin_config with an appropriate configuration file that enables polling of the steering wheel adapter instead of just using ldattach. Bug-AGL: SPEC-2918 Change-Id: I3258b7e34cecbbb1cfb93ea6f63a44f0bbb2c06f Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2018-11-30Disable sllin driver(using HVAC apps) debug logguppy_6.99.2guppy/6.99.26.99.2Yuichi Kusakabe1-0/+1
[ 30.042717] sllin: sllin_open() invoked [ 30.046603] sllin: Configured as MASTER [ 30.051508] sllin: Baudrate set to 9600 [ 30.056332] sllin0 (uninitialized): sllin_kwthread started. [ 30.062486] sllin0: sllin_kthread <WAIT_EVENT> [ 31.153606] sllin0: sll_open() invoked [ 31.271843] can: raw protocol (rev 20170425) [ 31.276821] sllin0: sllin_kthread <WAKEUPED> [ 31.281124] sllin0: sllin_kthread: lin_state <00000000> [ 31.286370] sllin0: sllin_kwthread: NON-RTR SFF CAN frame, ID = 30 dlc=0 [ 31.286390] sllin0: sllin_kthread: SLSTATE finish [ 31.299297] sllin0: sllin_send_break() invoke. [ 31.305566] sllin0: Break sent. [ 31.308743] sllin0: sllin_kthread <WAIT_EVENT> Change-Id: Id49951cb1ed570c99eb11d19298c1e5b57bcf13c Signed-off-by: Yuichi Kusakabe <yuichi.kusakabe@denso-ten.com>
2018-11-13Finalize and automate sllin setup for LIN on demo unitJan-Simon Möller1-1/+18
Provide the systemd unit, the init script, the module options and the autoload command. Change-Id: I8dfe59338f377ca8ac1b94fe568dff9e2b36bf97 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-10-31Add package for sllin driver to imageJan-Simon Möller1-0/+21
The sllin driver is needed for the AGL demo unit to drive the actuator and fan. Change-Id: I76a8e7876148b6c2fcbc526a64a7ec132668c754 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>