Age | Commit message (Collapse) | Author | Files | Lines |
|
Add patch to enable building the standalone MOST driver against
kernels 5.7 or newer.
Bug-AGL: SPEC-3819
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I6d8e2f68e3f1e73e1901e07d12a8569fb65996e9
|
|
All demo related components should be in here now.
We keep the packagegroups on purpose for now to stay backward-compatible.
v2: layer does pass yocto-check-layer, dependencies adapted
v3: remove the dynamic-layer setup, use all-in-one approach
v4: Fixed comments from Paul Barker. Tnx!
v5: Removed wayland/weston/agl-compositor additions, except for demo
specific weston-init bbappend
Follow-up changes required later:
- massaging packagegroups
- scrub of recipes
Bug-AGL: SPEC-3723
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I47cefd8c23d46b2cdd063470e3f7d97d5ad952d8
|
|
Changes:
- Add a can-dev-mapping-helper.sh script and systemd unit to drive
it, the script checks if the CAN devices specified in the low-can
configuration file /etc/dev-mapping.conf exist, and if not brings
up corresponding virtual CAN devices.
- Add a systemd over-ride conf file for agl-service-can-low-level
that makes can-dev-mapping-helper a dependency. This should ensure
that the low-can binding always starts even if there are no physical
CAN hardware devices.
- Added a Before statement to sllin-demo.service to ensure that it
will run before can-dev-mapping-helper and ensure that lin_config
can create sllin0 correctly.
- Removed the sllin-demo-virtual systemd unit, as it will no longer
be required with can-dev-mapping-helper.
- Updated the /var/run paths in sllin-demo.service and associated
start_lin_demo.sh script to quiet systemd warnings about /var/run
usage.
Bug-AGL: SPEC-3540
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ife02f75f57ac7bbdee6b02217e2ab657fe8c36e0
|
|
To enable seeing the steering wheel LIN messages on the cluster board
for the planned CES demo, a systemd unit that wraps the use of candump
in bridging mode is added when the agl-cluster-support feature is
enabled. To make sure that the sllin0 interface is always available
for testing without the specific demo LIN hardware, a vcan interface
is set up as sllin0 when the ttyUSB0 device representing the serial
adapter for the LIN transceiver is not present. Since this virtual
sllin0 interface is very useful for general testing of the steering
wheel event support up through the low-can and signal-composer stack,
it has not been hidden behind agl-cluster-demo-support.
Bug-AGL: SPEC-3049
Change-Id: Idb478e3fe4085859e8704ab0329a341b1a11e0ef
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Changes include:
- Add patch to fix lin-config recipe build QA error.
- Tweak lin-config recipe to install lin_config as executable.
- Rework sllin-demo systemd unit and start_lin_demo.sh script to use
lin_config with an appropriate configuration file that enables
polling of the steering wheel adapter instead of just using
ldattach.
Bug-AGL: SPEC-2918
Change-Id: I3258b7e34cecbbb1cfb93ea6f63a44f0bbb2c06f
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
[ 30.042717] sllin: sllin_open() invoked
[ 30.046603] sllin: Configured as MASTER
[ 30.051508] sllin: Baudrate set to 9600
[ 30.056332] sllin0 (uninitialized): sllin_kwthread started.
[ 30.062486] sllin0: sllin_kthread <WAIT_EVENT>
[ 31.153606] sllin0: sll_open() invoked
[ 31.271843] can: raw protocol (rev 20170425)
[ 31.276821] sllin0: sllin_kthread <WAKEUPED>
[ 31.281124] sllin0: sllin_kthread: lin_state <00000000>
[ 31.286370] sllin0: sllin_kwthread: NON-RTR SFF CAN frame, ID = 30
dlc=0
[ 31.286390] sllin0: sllin_kthread: SLSTATE finish
[ 31.299297] sllin0: sllin_send_break() invoke.
[ 31.305566] sllin0: Break sent.
[ 31.308743] sllin0: sllin_kthread <WAIT_EVENT>
Change-Id: Id49951cb1ed570c99eb11d19298c1e5b57bcf13c
Signed-off-by: Yuichi Kusakabe <yuichi.kusakabe@denso-ten.com>
|
|
Instead of default.target we need to use multi-user.target.
Change-Id: I7c6c9fce5223bccb2ddb20f165797632198c3405
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Provide the systemd unit, the init script, the module options and the autoload command.
Change-Id: I8dfe59338f377ca8ac1b94fe568dff9e2b36bf97
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
The sllin driver is needed for the AGL demo unit to drive the actuator and fan.
Change-Id: I76a8e7876148b6c2fcbc526a64a7ec132668c754
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
This patch removes the Mocca box application and the related
USB driver from the demo platform. It is needed to clean up
as the Mocca box is not used anymore.
Change-Id: Iebba72e773476b18974f7fff343f4e7b998090d9
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
|
|
This is the last part of the layer rework series.
Notable changes are:
- move demo specific recipes to the demo (dlt, web-runtime mocca-usb)
- wayland-ivi-extension moved to the meta-agl-demo layer for now.
- web-runtime moved here (from appfw layer to allow console-only builds with appfw)
- adapted packagegroups and agl-features
v2: squashed with commit on sandbox to form single commit (tnx, Scott)
v3: inclusion of old packagegroup-agl-image-ivi (TODO: refactor and include in profile packagegroups. Tnx, Stephane)
v4: base packagegroup-agl-demo-platform on packagegroup-agl-profile-graphical-qt5
v5: fix MOST_DRIVERS_append (disable due to FTBS)
v6: re-add RDEPENDS for virtual/pulseaudio-config
Bug-AGL: SPEC-145
Bug-AGL: SPEC-1422
Change-Id: I20bd5b9a957ea54a7ecd08bd4f8b99a32266c9c8
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Main goal of this is to move the agl-service-* bindings into the core and to
unify common recipes like wayland/weston into meta-agl-profile-graphical.
As a placeholder for recipes is meta-agl-profile-demo which are being reshuffled.
TLDR: remove recipes from meta-agl-demo that were moved to other layers
Bug-AGL: SPEC-145 , SPEC-876 , SPEC-877
v2: moving updated udisks changes to meta-agl
Change-Id: I873107f00adadeb6f3f266cce37b513fe6d44cf2
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
This patch adds a set of patches to enable DT usage of the DIM2 module.
It is needed to use the MediaLB (DIM) interface with the Kingfisher.
Change-Id: Idd71bea6f2c17cb579f0b44884037e7046380034
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
|
|
Change-Id: I799a4e5bac5f381ba72ee889d34a9faec29205e7
Signed-off-by: ronan <ronan.lemartret@gmail.com>
|
|
This uses the KERNEL_MODULE_AUTOLOAD framework provided by yocto
to load the kernel modules.
Change-Id: Ibb3980d04cc876c8707345673cf2852ecd46ca11
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
This patch makes use of the variable AGL_BRANCH to specify the
branch from which the sources are going to be fetched.
Change-Id: I32b99590717a5ef23f7d8e2ba493945626c9a823
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
|
|
This patch updates the most.bb and most.bbappend files to be in sync with
the recently pushed driver package to src/most. It adds and removes
backport patches as needed new driver source tree.
Change-Id: I091d925219eeb2986ce5b1545f41d3693500f7d3
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
|
|
This change simplifies the SRCREV handling by using
- AGL_APP_REVISION and AGL_DEFAULT_REVISION
in recipes.
Also the AGL_BRANCH can be used to switch to release branches.
Finally git checkouts should use https by default.
Bug-AGL: SPEC-864
Change-Id: I2fdacda8fa7373f309a47db72ad40106ade53434
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Do not apply 0002-most-pass-parent-devcie-to-snd_card_new.patch
while buidling MOST driver for Renesas Porter board.
Bug-AGL: SPEC-917
Change-Id: I0e3b09ef522721ea1d4e5b3cf7224f59958b3d48
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
This patch adds a patch queue to eliminate problems DMA coherent
memory allocation on aarch64 architecture, prevents the driver
from printing warning, due to bad video driver capabilities and
passes a valid parent device to the sound subsystem when
registering a new sound card.
---
v2 (jsmoeller): use _append everywhere
v3 (christian gromm): fix path in patch files
Change-Id: Idceefee7855445481eeb4940d5c5f632e27feb73
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
This patch adds a new "most" receipe for building the MOST driver. The
receipe replaces the old ones, as it builds all modules at once. Hence,
the receipes aim*, hdm* and mostcore are removed. Additionally, the *.bb
file for the demo platform is modified to reflect these changes.
This patch is needed to avoid dependency issues among the modules of the
driver stack. Although, the problem has been reported with SPEC 438 and a
patch set to fix it has been introduced with Change #8447, it is still
present on RaspberryPi.
Change-Id: Id6104ee6d9bf1b7d9744761a6529461176fdd8b2
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
|
|
Revert "Add a bbappend with pinnning for all packages with AUTOREV"
This reverts commit 87ec15b961e9502b7741d51503d5c77563b1c45a.
Change-Id: I35c74ad137217a9e8833baab8de9964de63ac61c
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
This pins all packages using AUTOREV to DISTRO_BRANCH_VERSION_TAG
Change-Id: Id8aa34a9115cd6659ce1c154d78197229d3c036f
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Varies recipes depend on the mostcore module being built
first. This patchset fixes a race condition that causes
invalid module builds.
Issue: SPEC-438
Change-Id: I045e88bc4aa31409937860a377bc43c25a194a2e
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
This patch updates the recipes used to build the MOST driver.
Since the driver source directory holds version 1.4.0-stable
as of commit f19c18408b515c5e33f96893cbe213d9ab30b904 it also
adds backport patches for the MOST sound and networking driver
needed to build for porter.
v2 (jsmoeller): combine with c8359
Change-Id: Ie56cadf9ef6224afb585fe950a0c3b0aff53b572
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Adding packages for CES2017 Demo to be incliuded in
agl-demo-platform by default.
This changes add below apps and related packages:
MediaPlayer from apps/mediaplayer
Settings from apps/settings
HVAC from apps/hvac
MOST network
VOD Service
v4 (jsmoeller): mark drivers as porter specific and
conditionalize the inclusion for porter only
v3 (jsmoeller): rebase on master
v2 (jsmoeller): make can-lin conditional to porter board
Change-Id: I4e89607508df2e630f46fcbcb64d4babb66a2d6f
Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
This change is for booting all stuff for MOST automatically
after WindowManager launched.
All services except insmod are in systemd user mode.
Change-Id: I15043493c797511275e4f02173a85f06a7298ca0
Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
|
|
This patch sets the permissions for loadDriver.sh to 0755.
Change-Id: I86bce55c06ffccedef17c821fb7b2dbdbef2bc1c
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
|
|
This patch changes the recipes to fetch the driver sources from
AGL's src directory. It therefore removes the redundant source
files from the recipe directory.
Change-Id: Ib3c48a0c7e79144713ccd8e10a89185cd929b41c
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
|
|
This commit adds the recipes-kernel directory to the meta-agl-demo
layer. It is needed to add the MOST driver to the AGL layer and have
it compiled as out-of-tree modules.
Change-Id: I38174a2f9a59b0424cfaf2f85f059550422f58f2
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
|