summaryrefslogtreecommitdiffstats
path: root/recipes-platform/packagegroups/packagegroup-agl-demo-platform.bb
AgeCommit message (Collapse)AuthorFilesLines
2020-02-06demo-i2c-udev-conf: fix inclusion in packagegroup-agl-demo-platformJan-Simon Moeller1-2/+3
The inclusion was not working. Fix it. Bug-AGL: SPEC-3091 . Change-Id: Ibbeed9665e4f1cde58a7b60205b33f94a7039d59 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-01-21Add agl-service-can-high-level-viwiicefish_8.99.5icefish/8.99.58.99.5Scott Murray1-2/+0
Add agl-service-can-high-level-viwi recipe to replace the high-level-viwi-service one from meta-agl (which will later be removed), and update packagegroup-agl-ivi-services to use it. Also remove high-level-viwi-service and agl-service-signal-composer from the AGL_APPS list in packagegroup-agl-demo-platform, as they are already pulled in via packagegroup-agl-ivi-services. Bug-AGL: SPEC-3113 Change-Id: I4ceab8b5ab1a4653f59749317d1a72c31652ca54 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2020-01-20alexa-viewer: add recipe and conditionally add to demo imageScott Murray1-0/+1
Add recipe for demo voice capabilities GUI metadata event viewer for Alexa voiceagent, and conditionally add it to the list of applications in packagegroup-agl-demo-platform based on the agl-voiceagent-alexa feature being present in IMAGE_FEATURES. Bug-AGL: SPEC-3110 Change-Id: I7b84ace51430937dbcb35f4773b06290039a19bd Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-12-29Add virtual sllin support and LIN bridging to CAN for demosScott Murray1-1/+6
To enable seeing the steering wheel LIN messages on the cluster board for the planned CES demo, a systemd unit that wraps the use of candump in bridging mode is added when the agl-cluster-support feature is enabled. To make sure that the sllin0 interface is always available for testing without the specific demo LIN hardware, a vcan interface is set up as sllin0 when the ttyUSB0 device representing the serial adapter for the LIN transceiver is not present. Since this virtual sllin0 interface is very useful for general testing of the steering wheel event support up through the low-can and signal-composer stack, it has not been hidden behind agl-cluster-demo-support. Bug-AGL: SPEC-3049 Change-Id: Idb478e3fe4085859e8704ab0329a341b1a11e0ef Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-12-14Add udev rules and scripts for demo platform configurationicefish_8.99.3icefish/8.99.38.99.3Jan-Simon Moeller1-1/+10
Add recipes for udev rules and associated scripts 1) Support USB attached I2C devices for RTC and HVAC LED support. The RTC support loads and configures the required rtc-ds1307 driver, and sets the time from the RTC clock. The HVAC LED support configures the LED device names for use by the HVAC binding. The new demo-i2c-udev-conf recipe is added to DEMO_PLATFORM_CONF variable in packagegroup-agl-demo-platform to have them added to the agl-demo-platform image. Since they use udev rules to detect the corresponding hardware, this should be safe for all platforms. Change-Id: Id08571b43c7ae9275496980e0a5568e145a1f653 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2019-12-09agl-demo-platform: refactor packagegroupsJacobo Aragunde Pérez1-36/+13
Move Qt-specific packages to packagegroup-agl-demo-platform, and non-specific to packagegroup-agl-demo. The goal is to be able to reuse packagegroup-agl-demo in an HTML5-only demo image. Bug-AGL: SPEC-2322 Change-Id: I9e3e34a1b224e10915b6e3d8dae90d50d8c6c806 Signed-off-by: Jacobo Aragunde Pérez <jaragunde@igalia.com>
2019-11-12packagegroups: remove libnaviapi-agl packageMatt Ranostay1-5/+0
libnaviapi-agl no longer exists since agl-service-navigation rewrite so remove it. Bug-AGL: SPEC-2880 Change-Id: I0ebf10c526bf28c16e77a5ef95bbfcf02cc6546d Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2019-10-23Install a full unzip for images with agl-develJan-Simon Möller1-0/+1
This avoids an issue with the busybox unzip throwing a CRC error. We don't need unzip for normal operation, so only add it for agl-devel. Bug-AGL: SPEC-2920 . Change-Id: Ic6c998ba1a8e30467cda1c19bff7c12558c40017 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-10-21Add tbtnavi cluster navigation applicationScott Murray1-4/+3
Add recipe for tbtnavi turn by turn navigation application for use on cluster remote display, and update packagegroup-agl-demo-platform to pull it in when PREFERRED_RPROVIDER_virtual/navigation is ondemandnavi (the default) and the agl-cluster-demo-support feature is enabled. Bug-AGL: SPEC-2913 Change-Id: I0280fe3a2fbd3ff58a028232560b421e83baa887 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-10-09Refactor packagegroup to enable sllin on h3Jan-Simon Möller1-10/+19
Remove the restriction to only add sllin on m3 as we're moving to the h3 in the demo. v2: make the settings adjustable in local.conf and remove comment. Bug-AGL: SPEC-2826 Change-Id: I09ea14934e3714daba6e94c81902453872ce1aa9 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-10-04packagegroups: add messaging application to AGL_APPSMatt Ranostay1-0/+1
Enable messaging application within the AGL Demo UI Bug-AGL: SPEC-2566 Change-Id: Ide080523664af98af2241642841144989ff7a529 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2019-09-02Update demo features for switch to ondemandnaviScott Murray1-6/+11
The ondemandnavi navigation application does not work with the mapviewer cluster demo application, so update the logic to handle the agl-cluster-demo-support feature in packagegroup-agl-demo-platform to not pull it in when using ondemandnavi as the virtual/navigation provider. Since the plan is to replace mapviewer with an equivalent QtLocation based map streamer for the cluster demo, the mapviewer-demo recipe has also been replaced with a more generically named cluster-demo-network-config recipe. Additionally, the agl-demo-preload feature logic has been tweaked to not pull in the map package for the old navigation application when using ondemandnavi. Bug-AGL: SPEC-2576 Change-Id: I57b45ab152f9fab6cee97d570be1949136cd39eb Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-08-22Enable recipe for unicens-controllerTobias Jahnke1-0/+1
agl-service-unicens-controller provides a clean API to control unicens devices Bug-AGL: SPEC-2738 Change-Id: I8d5ab82a1ff45e0cffc6db3a8043767c61d04ed8 Signed-off-by: Tobias Jahnke <tobias.jahnke@microchip.com>
2019-06-21Add the taskmanager app to the CES demo imageJan-Simon Möller1-0/+1
The taskmanager has been greatly improved. Add it to the demo image. Bug-AGL: SPEC-2511 Change-Id: Ic1eb64ec5c23d15e32af54d9391c9a4017a9c803 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-06-11Re-add mixer after being ready for pipewireJan-Simon Möller1-4/+1
Change-Id: I6f5469fc3c5570410dad119ed4233ab24a202db2 Bug-AGL: SPEC-2473 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-06-11Changes to support the switch to pipewireJan-Simon Möller1-1/+4
This moves all soundmanager components off into meta-agl-devel/meta-audio-soundmanager-framework . Soundmanager is not supported in HH. Furthermore, I simplified the image and packagegroup recipes. Feature templates were modified to reflect the change as well. Bug-AGL: SPEC-2473 Change-Id: I48b437fb2ed727ed362d92af56596096df62dd8d Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-12-20Disable btwilink by default on m3ulcbScott Murray1-2/+8
Testing for CES has found the wilink BT on the M3+Kingfisher somewhat unreliable. To disable it by default for now, add a demo platform configuration hook to packagegroup-agl-demo-platform and use it to pick up a modprobe configuration file to prevent btwilink from loading. This addition is specific to the m3ulcb platform, and the variable DEMO_ENABLE_BTWILINK can be used to over-ride the behavior by setting it to "true" in local.conf or site.conf. Change-Id: Ia645d9329594547f83601526e3f3fd5da5845b24 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2018-12-20Add agl-demo-preload featureScott Murray1-0/+5
Add a feature to preload the maps for the navigation app and the API key for the POI app. The intent is to allow building an image that works "out of the box" without manually installing things. The selection of UK or Japan maps can be controlled by setting the variable DEMO_MAPS_LOCALE to either "uk" (default) or "jp" in local.conf or site.conf. The POI API key should be set in one of those locations with the variable POIAPP_API_KEY (default value is an empty string). Change-Id: I25537935ddac740090f2121d0a83305c746185b0 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2018-12-10Add agl-cluster-demo-support featureScott Murray1-5/+5
Add new feature to enable support for the cluster demo. At the moment, it pulls in the agl-gstrecorder feature and enables building the required mapviewer application. Bug-AGL: SPEC-1730 Change-Id: I18c0312eefca9bb8c591e8b8a2b8113b4e94c7fc Signed-off-by: Scott Murray <scott.murray@konsulko.com> (cherry picked from commit af3ecc175fdb3cfbb7501ec5f1aad7718c08472a)
2018-11-13Finalize and automate sllin setup for LIN on demo unitJan-Simon Möller1-1/+1
Provide the systemd unit, the init script, the module options and the autoload command. Change-Id: I8dfe59338f377ca8ac1b94fe568dff9e2b36bf97 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-10-31Add package for sllin driver to imageJan-Simon Möller1-0/+1
The sllin driver is needed for the AGL demo unit to drive the actuator and fan. Change-Id: I76a8e7876148b6c2fcbc526a64a7ec132668c754 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-08-01Remove porter board configRonan Le Martret1-2/+0
* porter board is not supported any more in AGL Change-Id: Ifad3f089707d772f41d0ac6916348474a284b5b9 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-07-30Unlock kernel build on dragonboard due to broken most recipeJan-Simon Möller1-0/+1
We need to check that again ... Change-Id: I4c77bd208ec53daabef09e1f8c9949baff499ed2 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-07-30Unlock kernel build on vayu due to broken most recipeJan-Simon Möller1-0/+3
We need to check that again ... Change-Id: Icc4c22ac3ee9e3ab8747122f0e6f65f96ca232bb Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-07-27packagegroup-agl-demo-platform: re-activate MOST drivers on demo platformChristian Gromm1-2/+1
This patch removes the BROKENonIntelQemuRpi3 append condition when adding the MOST drivers to the demo platform. We can do this, as Change-ID 14239 takes care that the necessary kernel dependent backports are applied to the driver sources. Change-Id: Icbff481c4fdff514ea0fd58cb6db99772d8d45bc Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
2018-06-28Create a virtual/mixer for the AGL mixerRonan Le Martret1-1/+1
Bug-AGL: SPEC-1520 Change-Id: I7e382d0b31dcdabb98a95d90bacf89f2ec03abe9 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-06-08meta-agl-demo: remove Mocca applicationChristian Gromm1-6/+0
This patch removes the Mocca box application and the related USB driver from the demo platform. It is needed to clean up as the Mocca box is not used anymore. Change-Id: Iebba72e773476b18974f7fff343f4e7b998090d9 Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
2018-06-053rd part of the layer/profile rework [2/2]Jan-Simon Möller1-3/+2
This is the last part of the layer rework series. Notable changes are: - move demo specific recipes to the demo (dlt, web-runtime mocca-usb) - wayland-ivi-extension moved to the meta-agl-demo layer for now. - web-runtime moved here (from appfw layer to allow console-only builds with appfw) - adapted packagegroups and agl-features v2: squashed with commit on sandbox to form single commit (tnx, Scott) v3: inclusion of old packagegroup-agl-image-ivi (TODO: refactor and include in profile packagegroups. Tnx, Stephane) v4: base packagegroup-agl-demo-platform on packagegroup-agl-profile-graphical-qt5 v5: fix MOST_DRIVERS_append (disable due to FTBS) v6: re-add RDEPENDS for virtual/pulseaudio-config Bug-AGL: SPEC-145 Bug-AGL: SPEC-1422 Change-Id: I20bd5b9a957ea54a7ecd08bd4f8b99a32266c9c8 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-05-09packagegroup-agl-demo-platform: Fix WestonLeon Anavi1-0/+1
Add packagegroup-agl-image-weston to ensure that Weston will be successfully launched and the demo applications will appear with image agl-demo-platform on Raspberry Pi 3 as well as on other machines. Bug-AGL: SPEC-1427 Change-Id: Iae5ddeea612598750de565fecb0e51b79de56d57 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-02-16Remove the most drivers until updated for rockoJan-Simon Möller1-1/+2
The most drivers need fix for newer kernels. Disable build until fixed. Change-Id: I16b0af82bf1a7ed8b50efeb335e99ac141cf8aaf Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-01-03Add QtAGLExtrasTadao Tanikawa1-0/+2
Qt AGLExtras module provides a set of easy to create AGL Qt application. It uses the AGL HMI and application framework, therefore the application can be easily integrated to AGL HomeScreen/WindowManager on AGL Demo Platform. Bug-AGL: SPEC-1229 Change-Id: If4b2d3087f46cef7ce61487f6f8a6acd4bbf4d98 Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
2017-12-19Add signal composer recipe to demo platform targetRomain Forlot1-0/+1
Bug-AGL: SPEC-1186 Change-Id: Ife32412a9ef29502dfe518674e18258e089a583f Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2017-12-18Enable the AGL Navigation API library for C++Naoto Yamaguchi1-0/+6
Add AGL Navigation API library to rootfs and SDK. This change is necessary change for CES 2018 version POI App to commit in the future. Change-Id: I08996778dd858ee2d3c91e47defa1d6846c28bf9 Signed-off-by: Naoto Yamaguchi <i33399_YAMAGUCHI@aisin-aw.co.jp>
2017-12-08navigation: change current application to a RPROVIDES to allow multiple optionsMatt Ranostay1-1/+1
Change the navigation recipe to an RPROVIDES to allow various other options for navigation. This change also updates the respective packagegroup. Bug-AGL: SPEC-1157 Change-Id: I98a90510fca18f55b0db2ccac0e5aa00899730ac Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2017-12-07recipes-platform: packagegroups: add agl-service-unicens to section ↵Christian Gromm1-0/+1
MOST_HVAC_append This patch is needed to have agl-service-unicens compiled with the agl-demo-platform Change-Id: I67e443e1cd99e3100eb34f25aaa469f308389c66 Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
2017-11-23recipes-platform: add MOST driver configurationChristian Gromm1-0/+1
This patch adds the necessary files to have the MOST driver configured for UNICENS2 at system start up. Change-Id: I9a69192332d355a3f9d3df3771cd364771e8eb9a Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
2017-11-21Remove unicens v1 in favor of agl-service-unicensJan-Simon Möller1-2/+0
As discussed with Soya-san during the Integration F2F in Yokohama, these components are no longer required and replaced by the service binding 'agl-service-unicens'. Remove from packagegroup and remove the recipes. │·· Change-Id: I4542ba282c2cc1108715ec4e1774d003d9aa024e Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2017-11-09recipes-kernel: most: remove MOST support for PorterChristian Gromm1-0/+2
This patch ensures that the MOST driver is not being built, when the machine is set to porter. Change-Id: I0ccead42d3f158dcee03c4a5d3de80dedab16059 Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
2017-08-30Integration Low CAN demo and High Lvl ViWi.Romain Forlot1-0/+2
This integration use non automatic post installation at first boot on a board. Change-Id: I0f080c72ec98b9280256de20a45aa847714bebf0 Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2017-07-07Add mapviewer app to use cluster demo for R-Car M3Harunobu Kurokawa1-5/+1
Change-Id: Id3b4ddaeba650e15be87de7bf9fdca20335d9464 Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
2017-06-12fix MOST driver dependency issuesChristian Gromm1-8/+1
This patch adds a new "most" receipe for building the MOST driver. The receipe replaces the old ones, as it builds all modules at once. Hence, the receipes aim*, hdm* and mostcore are removed. Additionally, the *.bb file for the demo platform is modified to reflect these changes. This patch is needed to avoid dependency issues among the modules of the driver stack. Although, the problem has been reported with SPEC 438 and a patch set to fix it has been introduced with Change #8447, it is still present on RaspberryPi. Change-Id: Id6104ee6d9bf1b7d9744761a6529461176fdd8b2 Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
2017-05-22Remove unused controls app from default installScott Murray1-1/+0
The "controls" demo app is not particularly useful at this point, and where as it was not launchable from the homescreen in Chinook, the new dynamic list in Dab picks it up when it is installed, so it both throws off the current app icon spacing and makes thing look odd because it has no icon. So, just remove it to clean up the homescreen. Change-Id: I617e832b559b4df54e197f0056cb9da84fed4d7b Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2017-04-02Use split out AGL QtQuickControls2 repositoriesScott Murray1-1/+2
Replace usage of the CES2017 repository with the new split out qtquickcontrols2-agl and qtquickcontrols2-agl-style repositories containing the AGL demo custom widgets and style. Since the CES2017-demo recipe no longer serves a purpose, remove it now as well. Bug-AGL: SPEC-404, SPEC-462 Change-Id: I0c31ccfe45c8912da4589e38c2cb159975536aad Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2017-03-27most driver install to every boardsNaoto Yamaguchi1-4/+1
In packagegroup-agl-demo-platform.bb it is written as follows. add packages for CES2017 demo Only for porter as these kernel module sources are for the 3.10.x kernel only But, it install in all environments. This fix is to delete comments. Bug-AGL: SPEC-498 Change-Id: Ibc179c446b1bc20e8dc539ffc4864410a3f08754 Signed-off-by: Naoto Yamaguchi <i33399_YAMAGUCHI@aisin-aw.co.jp>
2017-03-03Switch to split out demo appsScott Murray1-2/+5
Add recipes for the split out controls, dashboard, phone, and radio app repositories, remove the related packaging of same from the CES2017-demo recipe, and add the split out apps to IMAGE_AGL_APPS in the agl-demo-platform image definition. Bug-AGL: SPEC-400, SPEC-401, SPEC-402, SPEC-403, SPEC-404 Change-Id: Ic3c7d134c90dd3fe989cb1ef7a510b1c5bf1fee8 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2017-02-21add dependency to imagesRonan1-2/+61
* [SPEC-424] * yocto image should use dependency to facilitate maintenance * yocto image should have its own LICENSE defined Change-Id: Ie7f2e48bab9cc194ce10e7d364e150d2678e64d6 Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
2017-01-16Get rid of Automotive Message Broker as it has been replaced.Romain Forlot1-1/+0
Now using AGL Application Framework Binding system Change-Id: Iac8844645cb85838922bb2fe4e4f355d4444bc09 Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2016-12-07Add homescreen as default to the agl-demo-platformJan-Simon Möller1-0/+1
This change adds the homescreen package into the default image. Change-Id: I5e0f5d7f0fe3937af02bcbe8c1be443da4c2128d Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2016-11-03move hvacplugin from meta-agl to meta-agl-demoRonan1-0/+1
Change-Id: I13c48bf7f16869d687ab563b5495836e6980df13 Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
2015-10-02Reworking packagegroups of AGL DistributionTadao Tanikawa1-0/+16
The recipe files and thier names are reworked by design of AGL packagegroup. For more details, see 'Packagegroups'section in README.md. Change-Id: Ib7fc66ec5f785b974719e85887715cc76f610ab4 Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>