summaryrefslogtreecommitdiffstats
path: root/recipes-platform
AgeCommit message (Collapse)AuthorFilesLines
2020-01-20alexa-viewer: add recipe and conditionally add to demo imagehalibut_8.0.6halibut_8.0.5halibut/8.0.6halibut/8.0.58.0.68.0.5Scott Murray1-0/+1
Add recipe for demo voice capabilities GUI metadata event viewer for Alexa voiceagent, and conditionally add it to the list of applications in packagegroup-agl-demo-platform based on the agl-voiceagent-alexa feature being present in IMAGE_FEATURES. Bug-AGL: SPEC-3110 Change-Id: I7b84ace51430937dbcb35f4773b06290039a19bd Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2020-01-20cluster-demo-support: add recipe for cluster-demo-simulatorJan-Simon Moeller1-0/+1
The cluster-demo-simulator is a small python script that sends can messages to simulate speed and rpm. It has support for steering wheel events. Bug-AGL: SPEC-3090 . Change-Id: I45bf259c984c59912a674a57ccc642a1917a3209 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-01-06demo-i2c-udev-conf: fix inclusion in packagegroup-agl-demo-platformJan-Simon Moeller1-2/+3
The inclusion was not working. Fix it. Bug-AGL: SPEC-3091 . Change-Id: Ibbeed9665e4f1cde58a7b60205b33f94a7039d59 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2019-12-29Add virtual sllin support and LIN bridging to CAN for demosScott Murray1-4/+9
To enable seeing the steering wheel LIN messages on the cluster board for the planned CES demo, a systemd unit that wraps the use of candump in bridging mode is added when the agl-cluster-support feature is enabled. To make sure that the sllin0 interface is always available for testing without the specific demo LIN hardware, a vcan interface is set up as sllin0 when the ttyUSB0 device representing the serial adapter for the LIN transceiver is not present. Since this virtual sllin0 interface is very useful for general testing of the steering wheel event support up through the low-can and signal-composer stack, it has not been hidden behind agl-cluster-demo-support. Bug-AGL: SPEC-3049 Change-Id: I527763176ce0f8b4d50cc472ec2343a6596286e2 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-12-15Add udev rules and scripts for demo platform configurationJan-Simon Moeller1-1/+10
Add recipes for udev rules and associated scripts 1) Support USB attached I2C devices for RTC and HVAC LED support. The RTC support loads and configures the required rtc-ds1307 driver, and sets the time from the RTC clock. The HVAC LED support configures the LED device names for use by the HVAC binding. The new demo-i2c-udev-conf recipe is added to DEMO_PLATFORM_CONF variable in packagegroup-agl-demo-platform to have them added to the agl-demo-platform image. Since they use udev rules to detect the corresponding hardware, this should be safe for all platforms. Change-Id: Id08571b43c7ae9275496980e0a5568e145a1f653 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> (cherry picked from commit d412114c0cf132a77f3b3482c5440b1a1c961b77)
2019-12-12Disable Kingfisher onboard Bluetooth when using h3ulcbScott Murray1-2/+2
Extend the current default disabling of the Kingfisher onboard Bluetooth when using m3ulcb to include h3ulcb as well. Bug-AGL: SPEC-3043 Change-Id: Ie1d5d39fcd23ad690dac8d2481152fb17ee79da5 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-12-11agl-demo-platform-crosssdk: add gcc-sanitizer to TOOLCHAIN_TARGET_TASKMatt Ranostay1-0/+5
Add gcc-sanitizers package to TOOLCHAIN_TARGET_TASK which allows linking of libasan for detecting use-after-free and other memory corruption issue in built applications/libraries. Bug-AGL: SPEC-3040 Change-Id: Idad618e2bd0e9fa98baa9a3befc694c5bddeb711 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2019-11-29packagegroups: remove libnaviapi-agl packageMatt Ranostay1-5/+0
libnaviapi-agl no longer exists since agl-service-navigation rewrite so remove it. Bug-AGL: SPEC-2880 Change-Id: I0ebf10c526bf28c16e77a5ef95bbfcf02cc6546d Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> (cherry picked from commit b706fa19383aac2717f96b2e9734d6561c5f5007)
2019-11-07Refactor packagegroup to enable sllin on h3Jan-Simon Möller1-10/+19
Remove the restriction to only add sllin on m3 as we're moving to the h3 in the demo. v2: make the settings adjustable in local.conf and remove comment. Bug-AGL: SPEC-2826 Change-Id: I09ea14934e3714daba6e94c81902453872ce1aa9 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> (cherry picked from commit 9b02ca4c8ea81bba23f97b7eb1e8fe200102a9eb)
2019-10-31Add tbtnavi cluster navigation applicationScott Murray1-4/+3
Add recipe for tbtnavi turn by turn navigation application for use on cluster remote display, and update packagegroup-agl-demo-platform to pull it in when PREFERRED_RPROVIDER_virtual/navigation is ondemandnavi (the default) and the agl-cluster-demo-support feature is enabled. Bug-AGL: SPEC-2913 Change-Id: I0280fe3a2fbd3ff58a028232560b421e83baa887 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-10-23Install a full unzip for images with agl-develJan-Simon Möller1-0/+1
This avoids an issue with the busybox unzip throwing a CRC error. We don't need unzip for normal operation, so only add it for agl-devel. Bug-AGL: SPEC-2920 . Change-Id: Ic6c998ba1a8e30467cda1c19bff7c12558c40017 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-10-21agl-demo-platform-crosssdk: add libstdc++-staticdevScott Murray1-0/+5
Add libstdc++-staticdev to target toolchain to support building agl-service-voice-high or other users of the C++17 filesystem standard library feature. This can be removed upon upgrade to gcc 9.x, as it will no longer be necessary. Bug-AGL: SPEC-2856, SPEC-2857 Change-Id: Ifd50d4e9960fe0bede887317116e6587eca5eb3d Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-10-16agl-demo-platform-crosssdk: add nlohmann-jsonScott Murray1-0/+6
Add nlohmann-json to target toolchain to support building the speech services. This is required until either the agl-speech-framework feature is added as a dependency of agl-demo, or the speech services are migrated into the core profile. Bug-AGL: SPEC-2856, SPEC-2857 Change-Id: I67fe96a73f5cccc8c2dbf2642041f2b64802c512 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-09-18packagegroups: move noto-emoji to TTF_FONTS defineMatt Ranostay2-1/+1
Move noto-emoji from packagegroup-agl-ivi-graphics.bb to TTF_FONTS in packagegroup-agl-demo.bb Bug-AGL: SPEC-2701 Change-Id: I3b0eeb0caea288229caacbcaf2b52369ac8dde8d Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2019-09-09packagegroups: graphics: add noto-emoji to packagegroupMatt Ranostay1-0/+1
Bug-AGL: SPEC-2701 Change-Id: I5be0a1fb5a78737090970741bf52390b4102c341 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> (cherry picked from commit 63d61630c728adaa3465c8f319e586a765d9804b)
2019-09-02Update demo features for switch to ondemandnavihalibut_8.0.1halibut/8.0.18.0.1Scott Murray1-6/+11
The ondemandnavi navigation application does not work with the mapviewer cluster demo application, so update the logic to handle the agl-cluster-demo-support feature in packagegroup-agl-demo-platform to not pull it in when using ondemandnavi as the virtual/navigation provider. Since the plan is to replace mapviewer with an equivalent QtLocation based map streamer for the cluster demo, the mapviewer-demo recipe has also been replaced with a more generically named cluster-demo-network-config recipe. Additionally, the agl-demo-preload feature logic has been tweaked to not pull in the map package for the old navigation application when using ondemandnavi. Bug-AGL: SPEC-2576 Change-Id: I57b45ab152f9fab6cee97d570be1949136cd39eb Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-06-21Add the taskmanager app to the CES demo imageJan-Simon Möller1-0/+1
The taskmanager has been greatly improved. Add it to the demo image. Bug-AGL: SPEC-2511 Change-Id: Ic1eb64ec5c23d15e32af54d9391c9a4017a9c803 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-06-11Re-add mixer after being ready for pipewireJan-Simon Möller1-4/+1
Change-Id: I6f5469fc3c5570410dad119ed4233ab24a202db2 Bug-AGL: SPEC-2473 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-06-11Changes to support the switch to pipewireJan-Simon Möller4-15/+13
This moves all soundmanager components off into meta-agl-devel/meta-audio-soundmanager-framework . Soundmanager is not supported in HH. Furthermore, I simplified the image and packagegroup recipes. Feature templates were modified to reflect the change as well. Bug-AGL: SPEC-2473 Change-Id: I48b437fb2ed727ed362d92af56596096df62dd8d Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-06-11packagegroup-agl-ivi-multimedia: update for pipewireGeorge Kiagiadakis1-1/+3
Bug-AGL: SPEC-2473 Change-Id: Ie9b1d74d1e9c427729b8a4c1d160649814ee44bb Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
2019-06-11packagegroup-agl-demo: depend on pipewire if the pipewire feature is enabledGeorge Kiagiadakis1-0/+4
Bug-AGL: SPEC-2473 Change-Id: I94cd7b7c39cad87926f0f3da6f15866c85a16850 Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
2019-06-07Remove switch between very old and current homescreenJan-Simon Möller1-4/+2
We are evolving the new homescreen. No need to keep the old variant. Bug-AGL: SPEC-2496 Change-Id: I314a2dbfee15ea951ee5c1006027a7d6ac8df44f Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-05-31Move launcher into meta-agl-demo from meta-agl-develJan-Simon Möller1-0/+23
Part of the layer cleanup. v2: Fix - moved libhomescreen to meta-agl v3: packagegroup-hmi-framework is too broad and only applies to -demo atm, move here v4: agl-service-homescreen should go to profile-graphical Bug-AGL: SPEC-2450 Change-Id: I00f1fda64af1f9d78b82902438c26c7f9579ae53 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-05-22recipes-platform: crosssdk-image: remove libvcard from SDKMatt Ranostay1-6/+0
vCard parsing is done within the agl-service-bluetooth-pbap binding so libqtappfw not longer requires libvcard, and in turn the SDK doesn't either Bug-AGL: SPEC-2392 Change-Id: I588f1ebfe54924542921b67b3c2c7be5e4cd6d78 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2019-04-26agl-demo-platform-crosssdk: Add mosquitto-devScott Murray1-0/+7
Add mosquitto-dev to agl-demo-platform-crosssdk to enable CI to build the telematics demo image application. This is likely a stopgap for now, as the plan to handle this situation going forward (i.e. use separate profile SDKs versus one superset one) will be discussed at the May 2019 F2F. A comment has been added to indicate this. Change-Id: Ibd48842d95c246dc0b7e7f0ec3fdb8300da55f7b Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-04-09Upgrade to thudScott Murray1-1/+0
Changes include: - Add LAYERSERIES_COMPAT definition to layer.conf - Replace libvcard recipe with bbappend now that a recipe is available in meta-qt5 - Add OECMAKE_GENERATOR = "Unix Makefiles" to libnaviapi-agl recipe for now to work around CMake+ninja issue - Add patch to navigation app to fix compilation against OpenSSL 1.1 - Remove libssp-dev from agl-demo-platform-crosssdk, upstream have removed it from non-mingw32 platform SDKs Known issues: - CMake+ninja issue in cmake-apps-module has been worked around with OECMAKE_GENERATOR Bug-AGL: SPEC-1837 Change-Id: I14c5355fb38d5eed064f154f889d61d8e46854b7 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-02-18Add libavirt to the SDKMark Farrugia1-0/+1
The libavirt library is added to the SDK, and is no longer required as a submodule for 4A modules. Change-Id: I0e7568b3f0e297b3ba132d09c5daeacedd6dc049 Signed-off-by: Mark Farrugia <mark.farrugia@fiberdyne.com.au>
2019-01-02Add the libafb-helpers and libappcontroller to SDKRomain Forlot1-0/+3
Bug-AGL: SPEC-1689 Change-Id: I373bc6eac903c7513fddee25f82f30e7d1567f1a Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2018-12-27Revert "Add the libafb-helpers and libappcontroller to SDK"guppy_6.99.3guppy/6.99.36.99.3Stephane Desneux1-2/+0
This reverts commit 602b0293ac24702e1e4957312dcd1e765d28e125. This is needed due to the other revert in meta-agl (#19359). Otherwise, agl-demo-platform-crosssdk is not buildable. Bug-AGL: SPEC-1689 Change-Id: Iae246faf53f8fa4946891de49646aec87fb14c19 Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
2018-12-20Add the libafb-helpers and libappcontroller to SDKRomain Forlot1-0/+2
Bug-AGL: SPEC-1689 Change-Id: I5f7ab962f9df3b931aeae7fa44f0160801ca1c1d Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2018-12-20Disable btwilink by default on m3ulcbScott Murray1-2/+8
Testing for CES has found the wilink BT on the M3+Kingfisher somewhat unreliable. To disable it by default for now, add a demo platform configuration hook to packagegroup-agl-demo-platform and use it to pick up a modprobe configuration file to prevent btwilink from loading. This addition is specific to the m3ulcb platform, and the variable DEMO_ENABLE_BTWILINK can be used to over-ride the behavior by setting it to "true" in local.conf or site.conf. Change-Id: Ia645d9329594547f83601526e3f3fd5da5845b24 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2018-12-20Add agl-demo-preload featureScott Murray1-0/+5
Add a feature to preload the maps for the navigation app and the API key for the POI app. The intent is to allow building an image that works "out of the box" without manually installing things. The selection of UK or Japan maps can be controlled by setting the variable DEMO_MAPS_LOCALE to either "uk" (default) or "jp" in local.conf or site.conf. The POI API key should be set in one of those locations with the variable POIAPP_API_KEY (default value is an empty string). Change-Id: I25537935ddac740090f2121d0a83305c746185b0 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2018-12-10Add agl-cluster-demo-support featureScott Murray1-5/+5
Add new feature to enable support for the cluster demo. At the moment, it pulls in the agl-gstrecorder feature and enables building the required mapviewer application. Bug-AGL: SPEC-1730 Change-Id: I18c0312eefca9bb8c591e8b8a2b8113b4e94c7fc Signed-off-by: Scott Murray <scott.murray@konsulko.com> (cherry picked from commit af3ecc175fdb3cfbb7501ec5f1aad7718c08472a)
2018-11-13Finalize and automate sllin setup for LIN on demo unitJan-Simon Möller1-1/+1
Provide the systemd unit, the init script, the module options and the autoload command. Change-Id: I8dfe59338f377ca8ac1b94fe568dff9e2b36bf97 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-10-31Add package for sllin driver to imageJan-Simon Möller1-0/+1
The sllin driver is needed for the AGL demo unit to drive the actuator and fan. Change-Id: I76a8e7876148b6c2fcbc526a64a7ec132668c754 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-10-12agl-ivi-multimedia: pull virtual/pulseaudio-config conditionnalyStephane Desneux1-1/+1
packagegroup-agl-ivi-multimedia must pull virtual/pulseaudio-config only if pulseaudio DISTRO_FEATURE is set. Bug-AGL: SPEC-1601, SPEC-1802 Change-Id: I9f54eafe610d7dc2a8e24227b1f957b206f03300 Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
2018-08-01Make pulseaudio conditional for agl-demo-platform-crosssdkRonan Le Martret1-1/+1
Bug-AGL: SPEC-1601 Change-Id: I6744e2beb9e577f6c3df51c6c6a3369ac2b835c9 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-08-01Remove porter board configRonan Le Martret1-2/+0
* porter board is not supported any more in AGL Change-Id: Ifad3f089707d772f41d0ac6916348474a284b5b9 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-07-30Unlock kernel build on dragonboard due to broken most recipeJan-Simon Möller1-0/+1
We need to check that again ... Change-Id: I4c77bd208ec53daabef09e1f8c9949baff499ed2 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-07-30Unlock kernel build on vayu due to broken most recipeJan-Simon Möller1-0/+3
We need to check that again ... Change-Id: Icc4c22ac3ee9e3ab8747122f0e6f65f96ca232bb Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-07-27packagegroup-agl-demo-platform: re-activate MOST drivers on demo platformChristian Gromm1-2/+1
This patch removes the BROKENonIntelQemuRpi3 append condition when adding the MOST drivers to the demo platform. We can do this, as Change-ID 14239 takes care that the necessary kernel dependent backports are applied to the driver sources. Change-Id: Icbff481c4fdff514ea0fd58cb6db99772d8d45bc Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
2018-07-26Remove explicit pull of qtwebengine when agl-develJosé Bollo1-2/+1
Save time and energy. Change-Id: I450b766bf082db735dc3733b2df8ddc5279d787b Signed-off-by: José Bollo <jose.bollo@iot.bzh>
2018-07-12Remove duplicate imageJan-Simon Möller1-19/+0
It was moved to meta-agl / core . Change-Id: I4144f4ad7a7c052a28c43f6dba9ab9b4bc047e5c Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-07-10Revert "packagegroup: connectivity: add neard nfc tools package"Matt Ranostay1-1/+0
This reverts commit 09fef5b7ae3f4d65fa8b6399207319a7407a1d4a. Bug-AGL: SPEC-1544 Change-Id: I5ea4a532ac42b05ecd572dfa0040ffeccdede0e7 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2018-07-10Revert "packagegroup: connectivity: add neardal-tools package"Matt Ranostay1-1/+0
This reverts commit c1ad9f55f68dfdee3c45aa7e8f79d3d02aab6bb5. Bug-AGL: SPEC-1544 Change-Id: Ied6f58988e7e46480ac7880a7a74517d60c9ce10 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2018-07-06packagegroup: connectivity: add neardal-tools packageMatt Ranostay1-0/+1
To allow easier access to the neard DBUS API include the neardal demo utilities. Bug-AGL: SPEC-1544 Change-Id: I2bf1ba3175470fc0f8730d1488c1b43b9b9dbbf8 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2018-07-04packagegroup: connectivity: add neard nfc tools packageMatt Ranostay1-0/+1
Add neard package which brings in important userspace daemons + tools to interface to NFC devices Bug-AGL: SPEC-1554 Change-Id: I9ec1d703098b0a974314db38b67c0d4e7e948342 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2018-07-04Revert "Add the libsocketcan and canutils userspace components"Stephane Desneux1-2/+1
This reverts commit 80c6bbcd190ac40305e0e2e83e20209f39c9dfb8. The reverted commit introduces a conflict when building for m3ulcb between can-utils and canutils. Change-Id: I97c188f0869c5816e7c378a00ac6df6424fe2d46 Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
2018-07-03Add the libsocketcan and canutils userspace componentsKhouloud Touil1-1/+2
libsocketcan and canutils userspace components are the needed tools to configure and use the CAN interfaces Change-Id: I3c17c7997b0d5701b0f916b88437047028bc9a1f Signed-off-by: Khouloud Touil <ktouil@baylibre.com>
2018-06-28Create a virtual/mixer for the AGL mixerRonan Le Martret1-1/+1
Bug-AGL: SPEC-1520 Change-Id: I7e382d0b31dcdabb98a95d90bacf89f2ec03abe9 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>