| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Note that while these changes do get the KVM demo images building
and bootable, some further investigation is required into getting
the guest displays rendering to the outputs.
Changes:
- Move some of the feature template and multiconfig files that were
accidentally left in meta-agl-demo to meta-agl-kvm-demo.
- Rework how MACHINE is defined for the guest multiconfig to make it
a bit more obvious how other machines could be supported. Sadly,
experimentaion has shown that trying to do a generic
virtio-${TUNE_ARCH} or similar scheme does not work with BitBake's
parser, so document that a bit.
- Update agl-qemu-runner.sh for change to IMAGE_NAME_SUFFIX default
value, and qemu now warning about using "-vga" with the "virt"
machine which does not support it.
- Add new "agl-virtio-guest" feature to AGL_FEATURES in guest to get
virtio kernel configuration.
Bug-AGL: SPEC-5201
Change-Id: I194a5c49adf6242cd91d205e19a8eecde698ad7e
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/30102
Tested-by: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
ci-image-build: Jenkins Job builder account
|
|
Changes:
- Move KVM demo configuration and image recipes to a new sub-layer,
meta-agl-kvm-demo, to keep things that may not be buildable with
just the agl-demo feature separate to avoid confusion. It will
hopefully also avoid clutter in recipes-platform/images.
This sub-layer is pulled in when the agl-kvm setup feature is
given to aglsetup.sh.
- Remove the agl-kvm-host-kuksa and agl-kvm-host-audio setup
features.
- Add new *-guest and *-guest-preconfigured flavors of the Flutter
IVI and IC images under meta-agl-kvm-demo that that have the
desired configuration changes baked in.
- Add required qemu-config recipe variants for the new guest image
flavors. At the moment there is more duplication of configuration
for this than is desired, and some reworking of agl-qemu-runner
configuration may come as a follow up to avoid this.
- Remove qemu-config recipe variants for unused Qt guest images.
If it becomes desirable to use the Qt demo images as guests this
can be revisited.
- Added agl-kvm-demo-flutter-preconfigured image variant that
supports the full demo setup (i.e. "green machine" with steering
wheel, equivalent to CES 2024 demos).
NOTES:
- The agl-kvm-demo image remains and builds roughly the same image
as before, with the KUKSA.val databroker running in the IVI guest
and cluster support enabled. Replacing this image with a bbclass
abstraction and an e.g. agl-kvm-demo-flutter image is under
consideration.
Bug-AGL: SPEC-5138
Change-Id: I64936208fd032e5ba47366e3a7ff572dc18338e4
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29918
ci-image-build: Jenkins Job builder account
Tested-by: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
|
|
Changes:
- Remove the agl-demo-preload and agl-demo-cluster-support setup
features.
- Make the agl-weston-remoting setup feature a dependency of the
agl-demo feature. To accommodate this with respect to avoiding
putting the remote-output display configuration into generated
weston.ini files when not required, the logic for that has been
moved from meta-agl-core's weston-ini-conf recipe, and extra
weston-ini-conf-* packages with the remote output support enabled
are now generated to be used in images when required.
- Add *-preconfigured versions of the images useful in a full demo
setup (i.e. with "green machine" for tradeshows). These images
have the configuration tweaks that the build setup features
enabled with conditional logic baked in.
- Remove now unnecessary connman-conf bbappend, we now assume that
the IVI and cluster IP addresses are assigned as 192.168.10.2
and 192.168.10.3 via DHCP in a full demo setup.
Notes:
- The cluster support in the *-preconfigured images assumes that
the IVI board is at IP address 192.168.10.2, and both boards are
in the 192.168.10.x subnet.
Bug-AGL: SPEC-5138
Change-Id: Icc472c6b602fa8fa5570af6cb0acaef853cbfa0f
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29866
ci-image-build: Jenkins Job builder account
Tested-by: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Add agl-demo-cluster-support and agl-demo-preload as dependencies
of the agl-kvm feature, as they are effectively required to get a
working agl-kvm-demo-platform image.
Bug-AGL: SPEC-5084
Change-Id: Ia766692f775e0274079ca266f4baf6e927bb6470
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-demo/+/29705
Tested-by: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
|
|
To allow usefully depending on the native-shell-client "homescreen"
application from the systemd units running QEMU, tweak things to
drop the use of agl-session from the agl-kvm-demo-platform host
image. The motivation for this is to have the VM guest start up
ordering work as expected, avoiding unnecessary delays from race
failures on boot.
Changes:
- Rework agl-kvm template to use conf/include/agl-kvm.inc include
file to match other featurs and simplify development.
- Add include files for the host ("default" in BitBake) and guest
(so agl-kvm-guest) multiconfigs to allow disabling the agl-demo
feature in the host build, which disables agl-session.
- Update native-shell-client systemd unit to run at system scope
and depend upon agl-compositor directly.
- Update agl-qemu-runner systemd template unit to depend directly
on native-shell-client.
Note that a consequence of these changes is that building images
other than agl-kvm-demo-platform when the "agl-kvm" feature is used
will likely not yield the desired results. Future work will
investigate avoiding this problem, or forcing explicit compatibility
errors to avoid user confusion.
Bug-AGL: SPEC-4618
Change-Id: I295caf2969c5f4179c93f1b57afa703f1a866457
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
(cherry picked from commit 94ee287730b16820003aece648e790923a9a5b79)
|
|
Add feature template for enabling agl-kvm-guest multiconfig. Changes
to leverage this to add a host image that includes guest VM images
will follow.
Bug-AGL: SPEC-4618
Change-Id: If8134359a1da7709d81b4ddd186d8c22de05280d
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
Scott Murray