diff options
Diffstat (limited to 'meta-egvirt')
22 files changed, 70 insertions, 3791 deletions
diff --git a/meta-egvirt/recipes-kernel/linux/linux-yocto/iio-scmi/0001-iio-scmi-Adding-support-for-IIO-SCMI-Based-Sensors.patch b/meta-egvirt/recipes-kernel/linux/linux-yocto/iio-scmi/0001-iio-scmi-Adding-support-for-IIO-SCMI-Based-Sensors.patch deleted file mode 100644 index 15f6b6a3..00000000 --- a/meta-egvirt/recipes-kernel/linux/linux-yocto/iio-scmi/0001-iio-scmi-Adding-support-for-IIO-SCMI-Based-Sensors.patch +++ /dev/null @@ -1,797 +0,0 @@ -From df55878d8bb123266d301939a3ff90762fd466e1 Mon Sep 17 00:00:00 2001 -From: Jyoti Bhayana <jbhayana@google.com> -Date: Fri, 12 Feb 2021 17:22:35 +0000 -Subject: [PATCH] iio/scmi: Adding support for IIO SCMI Based Sensors - -This change provides ARM SCMI Protocol based IIO device. -This driver provides support for Accelerometer and Gyroscope using -SCMI Sensor Protocol extensions added in the SCMIv3.0 ARM specification - -Signed-off-by: Jyoti Bhayana <jbhayana@google.com> -Link: https://lore.kernel.org/r/20210212172235.507028-2-jbhayana@google.com -Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> -Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> ---- - MAINTAINERS | 6 + - drivers/firmware/arm_scmi/driver.c | 2 +- - drivers/iio/common/Kconfig | 1 + - drivers/iio/common/Makefile | 1 + - drivers/iio/common/scmi_sensors/Kconfig | 18 + - drivers/iio/common/scmi_sensors/Makefile | 5 + - drivers/iio/common/scmi_sensors/scmi_iio.c | 678 +++++++++++++++++++++ - 7 files changed, 710 insertions(+), 1 deletion(-) - create mode 100644 drivers/iio/common/scmi_sensors/Kconfig - create mode 100644 drivers/iio/common/scmi_sensors/Makefile - create mode 100644 drivers/iio/common/scmi_sensors/scmi_iio.c - -diff --git a/MAINTAINERS b/MAINTAINERS -index d223a5c3f465..c3a0245a51d0 100644 ---- a/MAINTAINERS -+++ b/MAINTAINERS -@@ -8593,6 +8593,12 @@ S: Maintained - F: Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt - F: drivers/iio/multiplexer/iio-mux.c - -+IIO SCMI BASED DRIVER -+M: Jyoti Bhayana <jbhayana@google.com> -+L: linux-iio@vger.kernel.org -+S: Maintained -+F: drivers/iio/common/scmi_sensors/scmi_iio.c -+ - IIO SUBSYSTEM AND DRIVERS - M: Jonathan Cameron <jic23@kernel.org> - R: Lars-Peter Clausen <lars@metafoo.de> -diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c -index 540a55285349..fa7279839397 100644 ---- a/drivers/firmware/arm_scmi/driver.c -+++ b/drivers/firmware/arm_scmi/driver.c -@@ -808,7 +808,7 @@ static struct scmi_prot_devnames devnames[] = { - { SCMI_PROTOCOL_SYSTEM, { "syspower" },}, - { SCMI_PROTOCOL_PERF, { "cpufreq" },}, - { SCMI_PROTOCOL_CLOCK, { "clocks" },}, -- { SCMI_PROTOCOL_SENSOR, { "hwmon" },}, -+ { SCMI_PROTOCOL_SENSOR, { "hwmon", "iiodev" },}, - { SCMI_PROTOCOL_RESET, { "reset" },}, - }; - -diff --git a/drivers/iio/common/Kconfig b/drivers/iio/common/Kconfig -index 2b9ee9161abd..0334b4954773 100644 ---- a/drivers/iio/common/Kconfig -+++ b/drivers/iio/common/Kconfig -@@ -6,5 +6,6 @@ - source "drivers/iio/common/cros_ec_sensors/Kconfig" - source "drivers/iio/common/hid-sensors/Kconfig" - source "drivers/iio/common/ms_sensors/Kconfig" -+source "drivers/iio/common/scmi_sensors/Kconfig" - source "drivers/iio/common/ssp_sensors/Kconfig" - source "drivers/iio/common/st_sensors/Kconfig" -diff --git a/drivers/iio/common/Makefile b/drivers/iio/common/Makefile -index 4bc30bb548e2..fad40e1e1718 100644 ---- a/drivers/iio/common/Makefile -+++ b/drivers/iio/common/Makefile -@@ -11,5 +11,6 @@ - obj-y += cros_ec_sensors/ - obj-y += hid-sensors/ - obj-y += ms_sensors/ -+obj-y += scmi_sensors/ - obj-y += ssp_sensors/ - obj-y += st_sensors/ -diff --git a/drivers/iio/common/scmi_sensors/Kconfig b/drivers/iio/common/scmi_sensors/Kconfig -new file mode 100644 -index 000000000000..67e084cbb1ab ---- /dev/null -+++ b/drivers/iio/common/scmi_sensors/Kconfig -@@ -0,0 +1,18 @@ -+# -+# IIO over SCMI -+# -+# When adding new entries keep the list in alphabetical order -+ -+menu "IIO SCMI Sensors" -+ -+config IIO_SCMI -+ tristate "IIO SCMI" -+ depends on ARM_SCMI_PROTOCOL -+ select IIO_BUFFER -+ select IIO_KFIFO_BUF -+ help -+ Say yes here to build support for IIO SCMI Driver. -+ This provides ARM SCMI Protocol based IIO device. -+ This driver provides support for accelerometer and gyroscope -+ sensors available on SCMI based platforms. -+endmenu -diff --git a/drivers/iio/common/scmi_sensors/Makefile b/drivers/iio/common/scmi_sensors/Makefile -new file mode 100644 -index 000000000000..f13140a2575a ---- /dev/null -+++ b/drivers/iio/common/scmi_sensors/Makefile -@@ -0,0 +1,5 @@ -+# SPDX - License - Identifier : GPL - 2.0 - only -+# -+# Makefile for the IIO over SCMI -+# -+obj-$(CONFIG_IIO_SCMI) += scmi_iio.o -diff --git a/drivers/iio/common/scmi_sensors/scmi_iio.c b/drivers/iio/common/scmi_sensors/scmi_iio.c -new file mode 100644 -index 000000000000..31977c3bc600 ---- /dev/null -+++ b/drivers/iio/common/scmi_sensors/scmi_iio.c -@@ -0,0 +1,678 @@ -+// SPDX-License-Identifier: GPL-2.0 -+ -+/* -+ * System Control and Management Interface(SCMI) based IIO sensor driver -+ * -+ * Copyright (C) 2021 Google LLC -+ */ -+ -+#include <linux/delay.h> -+#include <linux/err.h> -+#include <linux/iio/buffer.h> -+#include <linux/iio/iio.h> -+#include <linux/iio/kfifo_buf.h> -+#include <linux/iio/sysfs.h> -+#include <linux/kernel.h> -+#include <linux/kthread.h> -+#include <linux/module.h> -+#include <linux/scmi_protocol.h> -+#include <linux/time.h> -+#include <linux/types.h> -+ -+#define SCMI_IIO_NUM_OF_AXIS 3 -+ -+struct scmi_iio_priv { -+ struct scmi_handle *handle; -+ const struct scmi_sensor_info *sensor_info; -+ struct iio_dev *indio_dev; -+ /* adding one additional channel for timestamp */ -+ long long iio_buf[SCMI_IIO_NUM_OF_AXIS + 1]; -+ struct notifier_block sensor_update_nb; -+ u32 *freq_avail; -+}; -+ -+static int scmi_iio_sensor_update_cb(struct notifier_block *nb, -+ unsigned long event, void *data) -+{ -+ struct scmi_sensor_update_report *sensor_update = data; -+ struct iio_dev *scmi_iio_dev; -+ struct scmi_iio_priv *sensor; -+ s8 tstamp_scale; -+ u64 time, time_ns; -+ int i; -+ -+ if (sensor_update->readings_count == 0) -+ return NOTIFY_DONE; -+ -+ sensor = container_of(nb, struct scmi_iio_priv, sensor_update_nb); -+ -+ for (i = 0; i < sensor_update->readings_count; i++) -+ sensor->iio_buf[i] = sensor_update->readings[i].value; -+ -+ if (!sensor->sensor_info->timestamped) { -+ time_ns = ktime_to_ns(sensor_update->timestamp); -+ } else { -+ /* -+ * All the axes are supposed to have the same value for timestamp. -+ * We are just using the values from the Axis 0 here. -+ */ -+ time = sensor_update->readings[0].timestamp; -+ -+ /* -+ * Timestamp returned by SCMI is in seconds and is equal to -+ * time * power-of-10 multiplier(tstamp_scale) seconds. -+ * Converting the timestamp to nanoseconds below. -+ */ -+ tstamp_scale = sensor->sensor_info->tstamp_scale + -+ const_ilog2(NSEC_PER_SEC) / const_ilog2(10); -+ if (tstamp_scale < 0) -+ time_ns = -+ div64_u64(time, int_pow(10, abs(tstamp_scale))); -+ else -+ time_ns = time * int_pow(10, tstamp_scale); -+ } -+ -+ scmi_iio_dev = sensor->indio_dev; -+ iio_push_to_buffers_with_timestamp(scmi_iio_dev, sensor->iio_buf, -+ time_ns); -+ return NOTIFY_OK; -+} -+ -+static int scmi_iio_buffer_preenable(struct iio_dev *iio_dev) -+{ -+ struct scmi_iio_priv *sensor = iio_priv(iio_dev); -+ u32 sensor_id = sensor->sensor_info->id; -+ u32 sensor_config = 0; -+ int err; -+ -+ if (sensor->sensor_info->timestamped) -+ sensor_config |= FIELD_PREP(SCMI_SENS_CFG_TSTAMP_ENABLED_MASK, -+ SCMI_SENS_CFG_TSTAMP_ENABLE); -+ -+ sensor_config |= FIELD_PREP(SCMI_SENS_CFG_SENSOR_ENABLED_MASK, -+ SCMI_SENS_CFG_SENSOR_ENABLE); -+ -+ err = sensor->handle->notify_ops->register_event_notifier(sensor->handle, -+ SCMI_PROTOCOL_SENSOR, SCMI_EVENT_SENSOR_UPDATE, -+ &sensor_id, &sensor->sensor_update_nb); -+ if (err) { -+ dev_err(&iio_dev->dev, -+ "Error in registering sensor update notifier for sensor %s err %d", -+ sensor->sensor_info->name, err); -+ return err; -+ } -+ -+ err = sensor->handle->sensor_ops->config_set(sensor->handle, -+ sensor->sensor_info->id, sensor_config); -+ if (err) { -+ sensor->handle->notify_ops->unregister_event_notifier(sensor->handle, -+ SCMI_PROTOCOL_SENSOR, -+ SCMI_EVENT_SENSOR_UPDATE, &sensor_id, -+ &sensor->sensor_update_nb); -+ dev_err(&iio_dev->dev, "Error in enabling sensor %s err %d", -+ sensor->sensor_info->name, err); -+ } -+ -+ return err; -+} -+ -+static int scmi_iio_buffer_postdisable(struct iio_dev *iio_dev) -+{ -+ struct scmi_iio_priv *sensor = iio_priv(iio_dev); -+ u32 sensor_id = sensor->sensor_info->id; -+ u32 sensor_config = 0; -+ int err; -+ -+ sensor_config |= FIELD_PREP(SCMI_SENS_CFG_SENSOR_ENABLED_MASK, -+ SCMI_SENS_CFG_SENSOR_DISABLE); -+ -+ err = sensor->handle->notify_ops->unregister_event_notifier(sensor->handle, -+ SCMI_PROTOCOL_SENSOR, SCMI_EVENT_SENSOR_UPDATE, -+ &sensor_id, &sensor->sensor_update_nb); -+ if (err) { -+ dev_err(&iio_dev->dev, -+ "Error in unregistering sensor update notifier for sensor %s err %d", -+ sensor->sensor_info->name, err); -+ return err; -+ } -+ -+ err = sensor->handle->sensor_ops->config_set(sensor->handle, sensor_id, -+ sensor_config); -+ if (err) { -+ dev_err(&iio_dev->dev, -+ "Error in disabling sensor %s with err %d", -+ sensor->sensor_info->name, err); -+ } -+ -+ return err; -+} -+ -+static const struct iio_buffer_setup_ops scmi_iio_buffer_ops = { -+ .preenable = scmi_iio_buffer_preenable, -+ .postdisable = scmi_iio_buffer_postdisable, -+}; -+ -+static int scmi_iio_set_odr_val(struct iio_dev *iio_dev, int val, int val2) -+{ -+ struct scmi_iio_priv *sensor = iio_priv(iio_dev); -+ const unsigned long UHZ_PER_HZ = 1000000UL; -+ u64 sec, mult, uHz; -+ u32 sensor_config; -+ char buf[32]; -+ -+ int err = sensor->handle->sensor_ops->config_get(sensor->handle, -+ sensor->sensor_info->id, &sensor_config); -+ if (err) { -+ dev_err(&iio_dev->dev, -+ "Error in getting sensor config for sensor %s err %d", -+ sensor->sensor_info->name, err); -+ return err; -+ } -+ -+ uHz = val * UHZ_PER_HZ + val2; -+ -+ /* -+ * The seconds field in the sensor interval in SCMI is 16 bits long -+ * Therefore seconds = 1/Hz <= 0xFFFF. As floating point calculations are -+ * discouraged in the kernel driver code, to calculate the scale factor (sf) -+ * (1* 1000000 * sf)/uHz <= 0xFFFF. Therefore, sf <= (uHz * 0xFFFF)/1000000 -+ * To calculate the multiplier,we convert the sf into char string and -+ * count the number of characters -+ */ -+ mult = scnprintf(buf, sizeof(buf), "%llu", ((u64)uHz * 0xFFFF) / UHZ_PER_HZ) - 1; -+ -+ sec = div64_u64(int_pow(10, mult) * UHZ_PER_HZ, uHz); -+ if (sec == 0) { -+ dev_err(&iio_dev->dev, -+ "Trying to set invalid sensor update value for sensor %s", -+ sensor->sensor_info->name); -+ return -EINVAL; -+ } -+ -+ sensor_config &= ~SCMI_SENS_CFG_UPDATE_SECS_MASK; -+ sensor_config |= FIELD_PREP(SCMI_SENS_CFG_UPDATE_SECS_MASK, sec); -+ sensor_config &= ~SCMI_SENS_CFG_UPDATE_EXP_MASK; -+ sensor_config |= FIELD_PREP(SCMI_SENS_CFG_UPDATE_EXP_MASK, -mult); -+ -+ if (sensor->sensor_info->timestamped) { -+ sensor_config &= ~SCMI_SENS_CFG_TSTAMP_ENABLED_MASK; -+ sensor_config |= FIELD_PREP(SCMI_SENS_CFG_TSTAMP_ENABLED_MASK, -+ SCMI_SENS_CFG_TSTAMP_ENABLE); -+ } -+ -+ sensor_config &= ~SCMI_SENS_CFG_ROUND_MASK; -+ sensor_config |= -+ FIELD_PREP(SCMI_SENS_CFG_ROUND_MASK, SCMI_SENS_CFG_ROUND_AUTO); -+ -+ err = sensor->handle->sensor_ops->config_set(sensor->handle, -+ sensor->sensor_info->id, sensor_config); -+ if (err) -+ dev_err(&iio_dev->dev, -+ "Error in setting sensor update interval for sensor %s value %u err %d", -+ sensor->sensor_info->name, sensor_config, err); -+ -+ return err; -+} -+ -+static int scmi_iio_write_raw(struct iio_dev *iio_dev, -+ struct iio_chan_spec const *chan, int val, -+ int val2, long mask) -+{ -+ int err; -+ -+ switch (mask) { -+ case IIO_CHAN_INFO_SAMP_FREQ: -+ mutex_lock(&iio_dev->mlock); -+ err = scmi_iio_set_odr_val(iio_dev, val, val2); -+ mutex_unlock(&iio_dev->mlock); -+ return err; -+ default: -+ return -EINVAL; -+ } -+} -+ -+static int scmi_iio_read_avail(struct iio_dev *iio_dev, -+ struct iio_chan_spec const *chan, -+ const int **vals, int *type, int *length, -+ long mask) -+{ -+ struct scmi_iio_priv *sensor = iio_priv(iio_dev); -+ -+ switch (mask) { -+ case IIO_CHAN_INFO_SAMP_FREQ: -+ *vals = sensor->freq_avail; -+ *type = IIO_VAL_INT_PLUS_MICRO; -+ *length = sensor->sensor_info->intervals.count * 2; -+ if (sensor->sensor_info->intervals.segmented) -+ return IIO_AVAIL_RANGE; -+ else -+ return IIO_AVAIL_LIST; -+ default: -+ return -EINVAL; -+ } -+} -+ -+static void convert_ns_to_freq(u64 interval_ns, u64 *hz, u64 *uhz) -+{ -+ u64 rem; -+ -+ *hz = div64_u64_rem(NSEC_PER_SEC, interval_ns, &rem); -+ *uhz = (rem * 1000000UL) / interval_ns; -+} -+ -+static int scmi_iio_get_odr_val(struct iio_dev *iio_dev, int *val, int *val2) -+{ -+ u64 sensor_update_interval, sensor_interval_mult, hz, uhz; -+ struct scmi_iio_priv *sensor = iio_priv(iio_dev); -+ u32 sensor_config; -+ int mult; -+ -+ int err = sensor->handle->sensor_ops->config_get(sensor->handle, -+ sensor->sensor_info->id, &sensor_config); -+ if (err) { -+ dev_err(&iio_dev->dev, -+ "Error in getting sensor config for sensor %s err %d", -+ sensor->sensor_info->name, err); -+ return err; -+ } -+ -+ sensor_update_interval = -+ SCMI_SENS_CFG_GET_UPDATE_SECS(sensor_config) * NSEC_PER_SEC; -+ -+ mult = SCMI_SENS_CFG_GET_UPDATE_EXP(sensor_config); -+ if (mult < 0) { -+ sensor_interval_mult = int_pow(10, abs(mult)); -+ sensor_update_interval = -+ sensor_update_interval / sensor_interval_mult; -+ } else { -+ sensor_interval_mult = int_pow(10, mult); -+ sensor_update_interval = -+ sensor_update_interval * sensor_interval_mult; -+ } -+ -+ convert_ns_to_freq(sensor_update_interval, &hz, &uhz); -+ *val = hz; -+ *val2 = uhz; -+ return 0; -+} -+ -+static int scmi_iio_read_raw(struct iio_dev *iio_dev, -+ struct iio_chan_spec const *ch, int *val, -+ int *val2, long mask) -+{ -+ struct scmi_iio_priv *sensor = iio_priv(iio_dev); -+ s8 scale; -+ int ret; -+ -+ switch (mask) { -+ case IIO_CHAN_INFO_SCALE: -+ scale = sensor->sensor_info->axis[ch->scan_index].scale; -+ if (scale < 0) { -+ *val = 1; -+ *val2 = int_pow(10, abs(scale)); -+ return IIO_VAL_FRACTIONAL; -+ } -+ *val = int_pow(10, scale); -+ return IIO_VAL_INT; -+ case IIO_CHAN_INFO_SAMP_FREQ: -+ ret = scmi_iio_get_odr_val(iio_dev, val, val2); -+ return ret ? ret : IIO_VAL_INT_PLUS_MICRO; -+ default: -+ return -EINVAL; -+ } -+} -+ -+static const struct iio_info scmi_iio_info = { -+ .read_raw = scmi_iio_read_raw, -+ .read_avail = scmi_iio_read_avail, -+ .write_raw = scmi_iio_write_raw, -+}; -+ -+static ssize_t scmi_iio_get_raw_available(struct iio_dev *iio_dev, -+ uintptr_t private, -+ const struct iio_chan_spec *chan, -+ char *buf) -+{ -+ struct scmi_iio_priv *sensor = iio_priv(iio_dev); -+ unsigned long long resolution, rem; -+ long long min_range, max_range; -+ s8 exponent, scale; -+ int len = 0; -+ -+ /* -+ * All the axes are supposed to have the same value for range and resolution. -+ * We are just using the values from the Axis 0 here. -+ */ -+ if (sensor->sensor_info->axis[0].extended_attrs) { -+ min_range = sensor->sensor_info->axis[0].attrs.min_range; -+ max_range = sensor->sensor_info->axis[0].attrs.max_range; -+ resolution = sensor->sensor_info->axis[0].resolution; -+ exponent = sensor->sensor_info->axis[0].exponent; -+ scale = sensor->sensor_info->axis[0].scale; -+ -+ /* -+ * To provide the raw value for the resolution to the userspace, -+ * need to divide the resolution exponent by the sensor scale -+ */ -+ exponent = exponent - scale; -+ if (exponent < 0) { -+ resolution = div64_u64_rem(resolution, -+ int_pow(10, abs(exponent)), -+ &rem); -+ len = scnprintf(buf, PAGE_SIZE, -+ "[%lld %llu.%llu %lld]\n", min_range, -+ resolution, rem, max_range); -+ } else { -+ resolution = resolution * int_pow(10, exponent); -+ len = scnprintf(buf, PAGE_SIZE, "[%lld %llu %lld]\n", -+ min_range, resolution, max_range); -+ } -+ } -+ return len; -+} -+ -+static const struct iio_chan_spec_ext_info scmi_iio_ext_info[] = { -+ { -+ .name = "raw_available", -+ .read = scmi_iio_get_raw_available, -+ .shared = IIO_SHARED_BY_TYPE, -+ }, -+ {}, -+}; -+ -+static void scmi_iio_set_timestamp_channel(struct iio_chan_spec *iio_chan, -+ int scan_index) -+{ -+ iio_chan->type = IIO_TIMESTAMP; -+ iio_chan->channel = -1; -+ iio_chan->scan_index = scan_index; -+ iio_chan->scan_type.sign = 'u'; -+ iio_chan->scan_type.realbits = 64; -+ iio_chan->scan_type.storagebits = 64; -+} -+ -+static void scmi_iio_set_data_channel(struct iio_chan_spec *iio_chan, -+ enum iio_chan_type type, -+ enum iio_modifier mod, int scan_index) -+{ -+ iio_chan->type = type; -+ iio_chan->modified = 1; -+ iio_chan->channel2 = mod; -+ iio_chan->info_mask_separate = BIT(IIO_CHAN_INFO_SCALE); -+ iio_chan->info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ); -+ iio_chan->info_mask_shared_by_type_available = -+ BIT(IIO_CHAN_INFO_SAMP_FREQ); -+ iio_chan->scan_index = scan_index; -+ iio_chan->scan_type.sign = 's'; -+ iio_chan->scan_type.realbits = 64; -+ iio_chan->scan_type.storagebits = 64; -+ iio_chan->scan_type.endianness = IIO_LE; -+ iio_chan->ext_info = scmi_iio_ext_info; -+} -+ -+static int scmi_iio_get_chan_modifier(const char *name, -+ enum iio_modifier *modifier) -+{ -+ char *pch, mod; -+ -+ if (!name) -+ return -EINVAL; -+ -+ pch = strrchr(name, '_'); -+ if (!pch) -+ return -EINVAL; -+ -+ mod = *(pch + 1); -+ switch (mod) { -+ case 'X': -+ *modifier = IIO_MOD_X; -+ return 0; -+ case 'Y': -+ *modifier = IIO_MOD_Y; -+ return 0; -+ case 'Z': -+ *modifier = IIO_MOD_Z; -+ return 0; -+ default: -+ return -EINVAL; -+ } -+} -+ -+static int scmi_iio_get_chan_type(u8 scmi_type, enum iio_chan_type *iio_type) -+{ -+ switch (scmi_type) { -+ case METERS_SEC_SQUARED: -+ *iio_type = IIO_ACCEL; -+ return 0; -+ case RADIANS_SEC: -+ *iio_type = IIO_ANGL_VEL; -+ return 0; -+ default: -+ return -EINVAL; -+ } -+} -+ -+static u64 scmi_iio_convert_interval_to_ns(u32 val) -+{ -+ u64 sensor_update_interval = -+ SCMI_SENS_INTVL_GET_SECS(val) * NSEC_PER_SEC; -+ u64 sensor_interval_mult; -+ int mult; -+ -+ mult = SCMI_SENS_INTVL_GET_EXP(val); -+ if (mult < 0) { -+ sensor_interval_mult = int_pow(10, abs(mult)); -+ sensor_update_interval = -+ sensor_update_interval / sensor_interval_mult; -+ } else { -+ sensor_interval_mult = int_pow(10, mult); -+ sensor_update_interval = -+ sensor_update_interval * sensor_interval_mult; -+ } -+ return sensor_update_interval; -+} -+ -+static int scmi_iio_set_sampling_freq_avail(struct iio_dev *iio_dev) -+{ -+ u64 cur_interval_ns, low_interval_ns, high_interval_ns, step_size_ns, -+ hz, uhz; -+ unsigned int cur_interval, low_interval, high_interval, step_size; -+ struct scmi_iio_priv *sensor = iio_priv(iio_dev); -+ int i; -+ -+ sensor->freq_avail = -+ devm_kzalloc(&iio_dev->dev, -+ sizeof(*sensor->freq_avail) * -+ (sensor->sensor_info->intervals.count * 2), -+ GFP_KERNEL); -+ if (!sensor->freq_avail) -+ return -ENOMEM; -+ -+ if (sensor->sensor_info->intervals.segmented) { -+ low_interval = sensor->sensor_info->intervals -+ .desc[SCMI_SENS_INTVL_SEGMENT_LOW]; -+ low_interval_ns = scmi_iio_convert_interval_to_ns(low_interval); -+ convert_ns_to_freq(low_interval_ns, &hz, &uhz); -+ sensor->freq_avail[0] = hz; -+ sensor->freq_avail[1] = uhz; -+ -+ step_size = sensor->sensor_info->intervals -+ .desc[SCMI_SENS_INTVL_SEGMENT_STEP]; -+ step_size_ns = scmi_iio_convert_interval_to_ns(step_size); -+ convert_ns_to_freq(step_size_ns, &hz, &uhz); -+ sensor->freq_avail[2] = hz; -+ sensor->freq_avail[3] = uhz; -+ -+ high_interval = sensor->sensor_info->intervals -+ .desc[SCMI_SENS_INTVL_SEGMENT_HIGH]; -+ high_interval_ns = -+ scmi_iio_convert_interval_to_ns(high_interval); -+ convert_ns_to_freq(high_interval_ns, &hz, &uhz); -+ sensor->freq_avail[4] = hz; -+ sensor->freq_avail[5] = uhz; -+ } else { -+ for (i = 0; i < sensor->sensor_info->intervals.count; i++) { -+ cur_interval = sensor->sensor_info->intervals.desc[i]; -+ cur_interval_ns = -+ scmi_iio_convert_interval_to_ns(cur_interval); -+ convert_ns_to_freq(cur_interval_ns, &hz, &uhz); -+ sensor->freq_avail[i * 2] = hz; -+ sensor->freq_avail[i * 2 + 1] = uhz; -+ } -+ } -+ return 0; -+} -+ -+static int scmi_iio_buffers_setup(struct iio_dev *scmi_iiodev) -+{ -+ struct iio_buffer *buffer; -+ -+ buffer = devm_iio_kfifo_allocate(&scmi_iiodev->dev); -+ if (!buffer) -+ return -ENOMEM; -+ -+ iio_device_attach_buffer(scmi_iiodev, buffer); -+ scmi_iiodev->modes |= INDIO_BUFFER_SOFTWARE; -+ scmi_iiodev->setup_ops = &scmi_iio_buffer_ops; -+ return 0; -+} -+ -+static struct iio_dev *scmi_alloc_iiodev(struct device *dev, -+ struct scmi_handle *handle, -+ const struct scmi_sensor_info *sensor_info) -+{ -+ struct iio_chan_spec *iio_channels; -+ struct scmi_iio_priv *sensor; -+ enum iio_modifier modifier; -+ enum iio_chan_type type; -+ struct iio_dev *iiodev; -+ int i, ret; -+ -+ iiodev = devm_iio_device_alloc(dev, sizeof(*sensor)); -+ if (!iiodev) -+ return ERR_PTR(-ENOMEM); -+ -+ iiodev->modes = INDIO_DIRECT_MODE; -+ iiodev->dev.parent = dev; -+ sensor = iio_priv(iiodev); -+ sensor->handle = handle; -+ sensor->sensor_info = sensor_info; -+ sensor->sensor_update_nb.notifier_call = scmi_iio_sensor_update_cb; -+ sensor->indio_dev = iiodev; -+ -+ /* adding one additional channel for timestamp */ -+ iiodev->num_channels = sensor_info->num_axis + 1; -+ iiodev->name = sensor_info->name; -+ iiodev->info = &scmi_iio_info; -+ -+ iio_channels = -+ devm_kzalloc(dev, -+ sizeof(*iio_channels) * (iiodev->num_channels), -+ GFP_KERNEL); -+ if (!iio_channels) -+ return ERR_PTR(-ENOMEM); -+ -+ ret = scmi_iio_set_sampling_freq_avail(iiodev); -+ if (ret < 0) -+ return ERR_PTR(ret); -+ -+ for (i = 0; i < sensor_info->num_axis; i++) { -+ ret = scmi_iio_get_chan_type(sensor_info->axis[i].type, &type); -+ if (ret < 0) -+ return ERR_PTR(ret); -+ -+ ret = scmi_iio_get_chan_modifier(sensor_info->axis[i].name, -+ &modifier); -+ if (ret < 0) -+ return ERR_PTR(ret); -+ -+ scmi_iio_set_data_channel(&iio_channels[i], type, modifier, -+ sensor_info->axis[i].id); -+ } -+ -+ scmi_iio_set_timestamp_channel(&iio_channels[i], i); -+ iiodev->channels = iio_channels; -+ return iiodev; -+} -+ -+static int scmi_iio_dev_probe(struct scmi_device *sdev) -+{ -+ const struct scmi_sensor_info *sensor_info; -+ struct scmi_handle *handle = sdev->handle; -+ struct device *dev = &sdev->dev; -+ struct iio_dev *scmi_iio_dev; -+ u16 nr_sensors; -+ int err = -ENODEV, i; -+ -+ if (!handle || !handle->sensor_ops) { -+ dev_err(dev, "SCMI device has no sensor interface\n"); -+ return -EINVAL; -+ } -+ -+ nr_sensors = handle->sensor_ops->count_get(handle); -+ if (!nr_sensors) { -+ dev_dbg(dev, "0 sensors found via SCMI bus\n"); -+ return -ENODEV; -+ } -+ -+ for (i = 0; i < nr_sensors; i++) { -+ sensor_info = handle->sensor_ops->info_get(handle, i); -+ if (!sensor_info) { -+ dev_err(dev, "SCMI sensor %d has missing info\n", i); -+ return -EINVAL; -+ } -+ -+ /* This driver only supports 3-axis accel and gyro, skipping other sensors */ -+ if (sensor_info->num_axis != SCMI_IIO_NUM_OF_AXIS) -+ continue; -+ -+ /* This driver only supports 3-axis accel and gyro, skipping other sensors */ -+ if (sensor_info->axis[0].type != METERS_SEC_SQUARED && -+ sensor_info->axis[0].type != RADIANS_SEC) -+ continue; -+ -+ scmi_iio_dev = scmi_alloc_iiodev(dev, handle, sensor_info); -+ if (IS_ERR(scmi_iio_dev)) { -+ dev_err(dev, -+ "failed to allocate IIO device for sensor %s: %ld\n", -+ sensor_info->name, PTR_ERR(scmi_iio_dev)); -+ return PTR_ERR(scmi_iio_dev); -+ } -+ -+ err = scmi_iio_buffers_setup(scmi_iio_dev); -+ if (err < 0) { -+ dev_err(dev, -+ "IIO buffer setup error at sensor %s: %d\n", -+ sensor_info->name, err); -+ return err; -+ } -+ -+ err = devm_iio_device_register(dev, scmi_iio_dev); -+ if (err) { -+ dev_err(dev, -+ "IIO device registration failed at sensor %s: %d\n", -+ sensor_info->name, err); -+ return err; -+ } -+ } -+ return err; -+} -+ -+static const struct scmi_device_id scmi_id_table[] = { -+ { SCMI_PROTOCOL_SENSOR, "iiodev" }, -+ {}, -+}; -+ -+MODULE_DEVICE_TABLE(scmi, scmi_id_table); -+ -+static struct scmi_driver scmi_iiodev_driver = { -+ .name = "scmi-sensor-iiodev", -+ .probe = scmi_iio_dev_probe, -+ .id_table = scmi_id_table, -+}; -+ -+module_scmi_driver(scmi_iiodev_driver); -+ -+MODULE_AUTHOR("Jyoti Bhayana <jbhayana@google.com>"); -+MODULE_DESCRIPTION("SCMI IIO Driver"); -+MODULE_LICENSE("GPL v2"); diff --git a/meta-egvirt/recipes-kernel/linux/linux-yocto/iio-scmi/0002-iio-core-Introduce-IIO_VAL_INT_64.patch b/meta-egvirt/recipes-kernel/linux/linux-yocto/iio-scmi/0002-iio-core-Introduce-IIO_VAL_INT_64.patch index 3245a806..2a18a04d 100644 --- a/meta-egvirt/recipes-kernel/linux/linux-yocto/iio-scmi/0002-iio-core-Introduce-IIO_VAL_INT_64.patch +++ b/meta-egvirt/recipes-kernel/linux/linux-yocto/iio-scmi/0002-iio-core-Introduce-IIO_VAL_INT_64.patch @@ -1,36 +1,38 @@ -From 41b693ffea78e5e754ba7c1b7b85a20deff8ba9f Mon Sep 17 00:00:00 2001 +From 3698bab1b1856a8146c8f8a83c888bd9cefcdde0 Mon Sep 17 00:00:00 2001 From: Andriy Tryshnivskyy <andriy.tryshnivskyy@opensynergy.com> -Date: Mon, 25 Oct 2021 13:30:19 +0300 +Date: Sun, 24 Oct 2021 12:16:26 +0300 Subject: [PATCH] iio: core: Introduce IIO_VAL_INT_64. Introduce IIO_VAL_INT_64 to read 64-bit value for channel attribute. Val is used as lower 32 bits. Signed-off-by: Andriy Tryshnivskyy <andriy.tryshnivskyy@opensynergy.com> +Link: https://lore.kernel.org/r/20211024091627.28031-2-andriy.tryshnivskyy@opensynergy.com +Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> --- drivers/iio/industrialio-core.c | 3 +++ include/linux/iio/types.h | 1 + 2 files changed, 4 insertions(+) diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c -index 261d3b17edc9..71ecb2e66714 100644 +index 3e1e86d987cc..3f21e6b49a4a 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c -@@ -638,6 +638,9 @@ static ssize_t __iio_format_value(char *buf, size_t len, unsigned int type, +@@ -702,6 +702,9 @@ static ssize_t __iio_format_value(char *buf, size_t offset, unsigned int type, } case IIO_VAL_CHAR: - return scnprintf(buf, len, "%c", (char)vals[0]); + return sysfs_emit_at(buf, offset, "%c", (char)vals[0]); + case IIO_VAL_INT_64: -+ tmp = (s64)((((u64)vals[1]) << 32) | (u32)vals[0]); -+ return scnprintf(buf, len, "%lld", tmp); ++ tmp2 = (s64)((((u64)vals[1]) << 32) | (u32)vals[0]); ++ return sysfs_emit_at(buf, offset, "%lld", tmp2); default: return 0; } diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h -index 1e3ed6f55bca..8d37cc5a3883 100644 +index 84b3f8175cc6..a7aa91f3a8dc 100644 --- a/include/linux/iio/types.h +++ b/include/linux/iio/types.h -@@ -23,6 +23,7 @@ enum iio_event_info { +@@ -24,6 +24,7 @@ enum iio_event_info { #define IIO_VAL_INT_PLUS_NANO 3 #define IIO_VAL_INT_PLUS_MICRO_DB 4 #define IIO_VAL_INT_MULTIPLE 5 diff --git a/meta-egvirt/recipes-kernel/linux/linux-yocto/iio-scmi/0003-iio-scmi-Add-reading-raw-attribute.patch b/meta-egvirt/recipes-kernel/linux/linux-yocto/iio-scmi/0003-iio-scmi-Add-reading-raw-attribute.patch index 678aa89b..a11e5e2f 100644 --- a/meta-egvirt/recipes-kernel/linux/linux-yocto/iio-scmi/0003-iio-scmi-Add-reading-raw-attribute.patch +++ b/meta-egvirt/recipes-kernel/linux/linux-yocto/iio-scmi/0003-iio-scmi-Add-reading-raw-attribute.patch @@ -1,21 +1,24 @@ -From 642e7a22d9f9e7c02869e1689d513dd84d118388 Mon Sep 17 00:00:00 2001 +From a58a59fa0d626990f32e84bd35e1326cf0532c4a Mon Sep 17 00:00:00 2001 From: Andriy Tryshnivskyy <andriy.tryshnivskyy@opensynergy.com> -Date: Mon, 25 Oct 2021 13:41:18 +0300 +Date: Sun, 24 Oct 2021 12:16:27 +0300 Subject: [PATCH] iio/scmi: Add reading "raw" attribute. Add IIO_CHAN_INFO_RAW to the mask and implement corresponding reading "raw" attribute in scmi_iio_read_raw. Signed-off-by: Andriy Tryshnivskyy <andriy.tryshnivskyy@opensynergy.com> +Acked-by: Jyoti Bhayana <jbhayana@google.com> +Link: https://lore.kernel.org/r/20211024091627.28031-3-andriy.tryshnivskyy@opensynergy.com +Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> --- drivers/iio/common/scmi_sensors/scmi_iio.c | 57 +++++++++++++++++++++- 1 file changed, 56 insertions(+), 1 deletion(-) diff --git a/drivers/iio/common/scmi_sensors/scmi_iio.c b/drivers/iio/common/scmi_sensors/scmi_iio.c -index 31977c3bc600..53b3242f0f19 100644 +index 7cf2bf282cef..d538bf3ab1ef 100644 --- a/drivers/iio/common/scmi_sensors/scmi_iio.c +++ b/drivers/iio/common/scmi_sensors/scmi_iio.c -@@ -296,6 +296,52 @@ static int scmi_iio_get_odr_val(struct iio_dev *iio_dev, int *val, int *val2) +@@ -279,6 +279,52 @@ static int scmi_iio_get_odr_val(struct iio_dev *iio_dev, int *val, int *val2) return 0; } @@ -29,8 +32,8 @@ index 31977c3bc600..53b3242f0f19 100644 + + sensor_config = FIELD_PREP(SCMI_SENS_CFG_SENSOR_ENABLED_MASK, + SCMI_SENS_CFG_SENSOR_ENABLE); -+ err = sensor->handle->sensor_ops->config_set( -+ sensor->handle, sensor->sensor_info->id, sensor_config); ++ err = sensor->sensor_ops->config_set( ++ sensor->ph, sensor->sensor_info->id, sensor_config); + if (err) { + dev_err(&iio_dev->dev, + "Error in enabling sensor %s err %d", @@ -38,8 +41,8 @@ index 31977c3bc600..53b3242f0f19 100644 + return err; + } + -+ err = sensor->handle->sensor_ops->reading_get_timestamped( -+ sensor->handle, sensor->sensor_info->id, ++ err = sensor->sensor_ops->reading_get_timestamped( ++ sensor->ph, sensor->sensor_info->id, + sensor->sensor_info->num_axis, readings); + if (err) { + dev_err(&iio_dev->dev, @@ -50,8 +53,8 @@ index 31977c3bc600..53b3242f0f19 100644 + + sensor_config = FIELD_PREP(SCMI_SENS_CFG_SENSOR_ENABLED_MASK, + SCMI_SENS_CFG_SENSOR_DISABLE); -+ err = sensor->handle->sensor_ops->config_set( -+ sensor->handle, sensor->sensor_info->id, sensor_config); ++ err = sensor->sensor_ops->config_set( ++ sensor->ph, sensor->sensor_info->id, sensor_config); + if (err) { + dev_err(&iio_dev->dev, + "Error in disabling sensor %s err %d", @@ -68,7 +71,7 @@ index 31977c3bc600..53b3242f0f19 100644 static int scmi_iio_read_raw(struct iio_dev *iio_dev, struct iio_chan_spec const *ch, int *val, int *val2, long mask) -@@ -317,6 +363,14 @@ static int scmi_iio_read_raw(struct iio_dev *iio_dev, +@@ -300,6 +346,14 @@ static int scmi_iio_read_raw(struct iio_dev *iio_dev, case IIO_CHAN_INFO_SAMP_FREQ: ret = scmi_iio_get_odr_val(iio_dev, val, val2); return ret ? ret : IIO_VAL_INT_PLUS_MICRO; @@ -83,7 +86,7 @@ index 31977c3bc600..53b3242f0f19 100644 default: return -EINVAL; } -@@ -398,7 +452,8 @@ static void scmi_iio_set_data_channel(struct iio_chan_spec *iio_chan, +@@ -381,7 +435,8 @@ static void scmi_iio_set_data_channel(struct iio_chan_spec *iio_chan, iio_chan->type = type; iio_chan->modified = 1; iio_chan->channel2 = mod; diff --git a/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0001-firmware-arm_scmi-rework-scmi_sensors_protocol_init.patch b/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0001-firmware-arm_scmi-rework-scmi_sensors_protocol_init.patch deleted file mode 100644 index 02024d11..00000000 --- a/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0001-firmware-arm_scmi-rework-scmi_sensors_protocol_init.patch +++ /dev/null @@ -1,69 +0,0 @@ -From d9d8732bdf07755780f37cf083ead8b61ee3c95d Mon Sep 17 00:00:00 2001 -From: Cristian Marussi <cristian.marussi@arm.com> -Date: Thu, 19 Nov 2020 17:49:01 +0000 -Subject: [PATCH] firmware: arm_scmi: rework scmi_sensors_protocol_init - -Properly handle return values from initialization helpers and avoid -setting sensor_ops before sensor_priv. - -Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> -Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> ---- - drivers/firmware/arm_scmi/sensors.c | 16 ++++++++++------ - 1 file changed, 10 insertions(+), 6 deletions(-) - -diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c -index b4232d611033..6aaff478d032 100644 ---- a/drivers/firmware/arm_scmi/sensors.c -+++ b/drivers/firmware/arm_scmi/sensors.c -@@ -2,7 +2,7 @@ - /* - * System Control and Management Interface (SCMI) Sensor Protocol - * -- * Copyright (C) 2018 ARM Ltd. -+ * Copyright (C) 2018-2020 ARM Ltd. - */ - - #define pr_fmt(fmt) "SCMI Notifications SENSOR - " fmt -@@ -334,6 +334,7 @@ static const struct scmi_event_ops sensor_event_ops = { - static int scmi_sensors_protocol_init(struct scmi_handle *handle) - { - u32 version; -+ int ret; - struct sensors_info *sinfo; - - scmi_version_get(handle, SCMI_PROTOCOL_SENSOR, &version); -@@ -344,15 +345,19 @@ static int scmi_sensors_protocol_init(struct scmi_handle *handle) - sinfo = devm_kzalloc(handle->dev, sizeof(*sinfo), GFP_KERNEL); - if (!sinfo) - return -ENOMEM; -+ sinfo->version = version; - -- scmi_sensor_attributes_get(handle, sinfo); -- -+ ret = scmi_sensor_attributes_get(handle, sinfo); -+ if (ret) -+ return ret; - sinfo->sensors = devm_kcalloc(handle->dev, sinfo->num_sensors, - sizeof(*sinfo->sensors), GFP_KERNEL); - if (!sinfo->sensors) - return -ENOMEM; - -- scmi_sensor_description_get(handle, sinfo); -+ ret = scmi_sensor_description_get(handle, sinfo); -+ if (ret) -+ return ret; - - scmi_register_protocol_events(handle, - SCMI_PROTOCOL_SENSOR, SCMI_PROTO_QUEUE_SZ, -@@ -360,9 +365,8 @@ static int scmi_sensors_protocol_init(struct scmi_handle *handle) - ARRAY_SIZE(sensor_events), - sinfo->num_sensors); - -- sinfo->version = version; -- handle->sensor_ops = &sensor_ops; - handle->sensor_priv = sinfo; -+ handle->sensor_ops = &sensor_ops; - - return 0; - } diff --git a/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0002-firmware-arm_scmi-add-SCMIv3.0-Sensors-descriptors-e.patch b/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0002-firmware-arm_scmi-add-SCMIv3.0-Sensors-descriptors-e.patch deleted file mode 100644 index 8a4e3ded..00000000 --- a/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0002-firmware-arm_scmi-add-SCMIv3.0-Sensors-descriptors-e.patch +++ /dev/null @@ -1,733 +0,0 @@ -From 994102ee967232e7565887d2a5fb83384b550bd8 Mon Sep 17 00:00:00 2001 -From: Cristian Marussi <cristian.marussi@arm.com> -Date: Thu, 19 Nov 2020 17:49:02 +0000 -Subject: [PATCH] firmware: arm_scmi: add SCMIv3.0 Sensors descriptors - extensions - -Add support for new SCMIv3.0 Sensors extensions related to new sensors' -features, like multiple axis and update intervals, while keeping -compatibility with SCMIv2.0 features. -While at that, refactor and simplify all the internal helpers macros and -move struct scmi_sensor_info to use only non-fixed-size typing. - -Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> -Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> ---- - drivers/firmware/arm_scmi/sensors.c | 390 ++++++++++++++++++++++++++-- - include/linux/scmi_protocol.h | 220 +++++++++++++++- - 2 files changed, 585 insertions(+), 25 deletions(-) - -diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c -index 6aaff478d032..a85827f60a02 100644 ---- a/drivers/firmware/arm_scmi/sensors.c -+++ b/drivers/firmware/arm_scmi/sensors.c -@@ -7,16 +7,22 @@ - - #define pr_fmt(fmt) "SCMI Notifications SENSOR - " fmt - -+#include <linux/bitfield.h> - #include <linux/scmi_protocol.h> - - #include "common.h" - #include "notify.h" - -+#define SCMI_MAX_NUM_SENSOR_AXIS 63 -+#define SCMIv2_SENSOR_PROTOCOL 0x10000 -+ - enum scmi_sensor_protocol_cmd { - SENSOR_DESCRIPTION_GET = 0x3, - SENSOR_TRIP_POINT_NOTIFY = 0x4, - SENSOR_TRIP_POINT_CONFIG = 0x5, - SENSOR_READING_GET = 0x6, -+ SENSOR_AXIS_DESCRIPTION_GET = 0x7, -+ SENSOR_LIST_UPDATE_INTERVALS = 0x8, - }; - - struct scmi_msg_resp_sensor_attributes { -@@ -28,23 +34,100 @@ struct scmi_msg_resp_sensor_attributes { - __le32 reg_size; - }; - -+/* v3 attributes_low macros */ -+#define SUPPORTS_UPDATE_NOTIFY(x) FIELD_GET(BIT(30), (x)) -+#define SENSOR_TSTAMP_EXP(x) FIELD_GET(GENMASK(14, 10), (x)) -+#define SUPPORTS_TIMESTAMP(x) FIELD_GET(BIT(9), (x)) -+#define SUPPORTS_EXTEND_ATTRS(x) FIELD_GET(BIT(8), (x)) -+ -+/* v2 attributes_high macros */ -+#define SENSOR_UPDATE_BASE(x) FIELD_GET(GENMASK(31, 27), (x)) -+#define SENSOR_UPDATE_SCALE(x) FIELD_GET(GENMASK(26, 22), (x)) -+ -+/* v3 attributes_high macros */ -+#define SENSOR_AXIS_NUMBER(x) FIELD_GET(GENMASK(21, 16), (x)) -+#define SUPPORTS_AXIS(x) FIELD_GET(BIT(8), (x)) -+ -+/* v3 resolution macros */ -+#define SENSOR_RES(x) FIELD_GET(GENMASK(26, 0), (x)) -+#define SENSOR_RES_EXP(x) FIELD_GET(GENMASK(31, 27), (x)) -+ -+struct scmi_msg_resp_attrs { -+ __le32 min_range_low; -+ __le32 min_range_high; -+ __le32 max_range_low; -+ __le32 max_range_high; -+}; -+ - struct scmi_msg_resp_sensor_description { - __le16 num_returned; - __le16 num_remaining; -- struct { -+ struct scmi_sensor_descriptor { -+ __le32 id; -+ __le32 attributes_low; -+/* Common attributes_low macros */ -+#define SUPPORTS_ASYNC_READ(x) FIELD_GET(BIT(31), (x)) -+#define NUM_TRIP_POINTS(x) FIELD_GET(GENMASK(7, 0), (x)) -+ __le32 attributes_high; -+/* Common attributes_high macros */ -+#define SENSOR_SCALE(x) FIELD_GET(GENMASK(15, 11), (x)) -+#define SENSOR_SCALE_SIGN BIT(4) -+#define SENSOR_SCALE_EXTEND GENMASK(31, 5) -+#define SENSOR_TYPE(x) FIELD_GET(GENMASK(7, 0), (x)) -+ u8 name[SCMI_MAX_STR_SIZE]; -+ /* only for version > 2.0 */ -+ __le32 power; -+ __le32 resolution; -+ struct scmi_msg_resp_attrs scalar_attrs; -+ } desc[]; -+}; -+ -+/* Base scmi_sensor_descriptor size excluding extended attrs after name */ -+#define SCMI_MSG_RESP_SENS_DESCR_BASE_SZ 28 -+ -+/* Sign extend to a full s32 */ -+#define S32_EXT(v) \ -+ ({ \ -+ int __v = (v); \ -+ \ -+ if (__v & SENSOR_SCALE_SIGN) \ -+ __v |= SENSOR_SCALE_EXTEND; \ -+ __v; \ -+ }) -+ -+struct scmi_msg_sensor_axis_description_get { -+ __le32 id; -+ __le32 axis_desc_index; -+}; -+ -+struct scmi_msg_resp_sensor_axis_description { -+ __le32 num_axis_flags; -+#define NUM_AXIS_RETURNED(x) FIELD_GET(GENMASK(5, 0), (x)) -+#define NUM_AXIS_REMAINING(x) FIELD_GET(GENMASK(31, 26), (x)) -+ struct scmi_axis_descriptor { - __le32 id; - __le32 attributes_low; --#define SUPPORTS_ASYNC_READ(x) ((x) & BIT(31)) --#define NUM_TRIP_POINTS(x) ((x) & 0xff) - __le32 attributes_high; --#define SENSOR_TYPE(x) ((x) & 0xff) --#define SENSOR_SCALE(x) (((x) >> 11) & 0x1f) --#define SENSOR_SCALE_SIGN BIT(4) --#define SENSOR_SCALE_EXTEND GENMASK(7, 5) --#define SENSOR_UPDATE_SCALE(x) (((x) >> 22) & 0x1f) --#define SENSOR_UPDATE_BASE(x) (((x) >> 27) & 0x1f) -- u8 name[SCMI_MAX_STR_SIZE]; -- } desc[0]; -+ u8 name[SCMI_MAX_STR_SIZE]; -+ __le32 resolution; -+ struct scmi_msg_resp_attrs attrs; -+ } desc[]; -+}; -+ -+/* Base scmi_axis_descriptor size excluding extended attrs after name */ -+#define SCMI_MSG_RESP_AXIS_DESCR_BASE_SZ 28 -+ -+struct scmi_msg_sensor_list_update_intervals { -+ __le32 id; -+ __le32 index; -+}; -+ -+struct scmi_msg_resp_sensor_list_update_intervals { -+ __le32 num_intervals_flags; -+#define NUM_INTERVALS_RETURNED(x) FIELD_GET(GENMASK(11, 0), (x)) -+#define SEGMENTED_INTVL_FORMAT(x) FIELD_GET(BIT(12), (x)) -+#define NUM_INTERVALS_REMAINING(x) FIELD_GET(GENMASK(31, 16), (x)) -+ __le32 intervals[]; - }; - - struct scmi_msg_sensor_trip_point_notify { -@@ -114,6 +197,194 @@ static int scmi_sensor_attributes_get(const struct scmi_handle *handle, - return ret; - } - -+static inline void scmi_parse_range_attrs(struct scmi_range_attrs *out, -+ struct scmi_msg_resp_attrs *in) -+{ -+ out->min_range = get_unaligned_le64((void *)&in->min_range_low); -+ out->max_range = get_unaligned_le64((void *)&in->max_range_low); -+} -+ -+static int scmi_sensor_update_intervals(const struct scmi_handle *handle, -+ struct scmi_sensor_info *s) -+{ -+ int ret, cnt; -+ u32 desc_index = 0; -+ u16 num_returned, num_remaining; -+ struct scmi_xfer *ti; -+ struct scmi_msg_resp_sensor_list_update_intervals *buf; -+ struct scmi_msg_sensor_list_update_intervals *msg; -+ -+ ret = scmi_xfer_get_init(handle, SENSOR_LIST_UPDATE_INTERVALS, -+ SCMI_PROTOCOL_SENSOR, sizeof(*msg), 0, &ti); -+ if (ret) -+ return ret; -+ -+ buf = ti->rx.buf; -+ do { -+ u32 flags; -+ -+ msg = ti->tx.buf; -+ /* Set the number of sensors to be skipped/already read */ -+ msg->id = cpu_to_le32(s->id); -+ msg->index = cpu_to_le32(desc_index); -+ -+ ret = scmi_do_xfer(handle, ti); -+ if (ret) -+ break; -+ -+ flags = le32_to_cpu(buf->num_intervals_flags); -+ num_returned = NUM_INTERVALS_RETURNED(flags); -+ num_remaining = NUM_INTERVALS_REMAINING(flags); -+ -+ /* -+ * Max intervals is not declared previously anywhere so we -+ * assume it's returned+remaining. -+ */ -+ if (!s->intervals.count) { -+ s->intervals.segmented = SEGMENTED_INTVL_FORMAT(flags); -+ s->intervals.count = num_returned + num_remaining; -+ /* segmented intervals are reported in one triplet */ -+ if (s->intervals.segmented && -+ (num_remaining || num_returned != 3)) { -+ dev_err(handle->dev, -+ "Sensor ID:%d advertises an invalid segmented interval (%d)\n", -+ s->id, s->intervals.count); -+ s->intervals.segmented = false; -+ s->intervals.count = 0; -+ ret = -EINVAL; -+ break; -+ } -+ /* Direct allocation when exceeding pre-allocated */ -+ if (s->intervals.count >= SCMI_MAX_PREALLOC_POOL) { -+ s->intervals.desc = -+ devm_kcalloc(handle->dev, -+ s->intervals.count, -+ sizeof(*s->intervals.desc), -+ GFP_KERNEL); -+ if (!s->intervals.desc) { -+ s->intervals.segmented = false; -+ s->intervals.count = 0; -+ ret = -ENOMEM; -+ break; -+ } -+ } -+ } else if (desc_index + num_returned > s->intervals.count) { -+ dev_err(handle->dev, -+ "No. of update intervals can't exceed %d\n", -+ s->intervals.count); -+ ret = -EINVAL; -+ break; -+ } -+ -+ for (cnt = 0; cnt < num_returned; cnt++) -+ s->intervals.desc[desc_index + cnt] = -+ le32_to_cpu(buf->intervals[cnt]); -+ -+ desc_index += num_returned; -+ -+ scmi_reset_rx_to_maxsz(handle, ti); -+ /* -+ * check for both returned and remaining to avoid infinite -+ * loop due to buggy firmware -+ */ -+ } while (num_returned && num_remaining); -+ -+ scmi_xfer_put(handle, ti); -+ return ret; -+} -+ -+static int scmi_sensor_axis_description(const struct scmi_handle *handle, -+ struct scmi_sensor_info *s) -+{ -+ int ret, cnt; -+ u32 desc_index = 0; -+ u16 num_returned, num_remaining; -+ struct scmi_xfer *te; -+ struct scmi_msg_resp_sensor_axis_description *buf; -+ struct scmi_msg_sensor_axis_description_get *msg; -+ -+ s->axis = devm_kcalloc(handle->dev, s->num_axis, -+ sizeof(*s->axis), GFP_KERNEL); -+ if (!s->axis) -+ return -ENOMEM; -+ -+ ret = scmi_xfer_get_init(handle, SENSOR_AXIS_DESCRIPTION_GET, -+ SCMI_PROTOCOL_SENSOR, sizeof(*msg), 0, &te); -+ if (ret) -+ return ret; -+ -+ buf = te->rx.buf; -+ do { -+ u32 flags; -+ struct scmi_axis_descriptor *adesc; -+ -+ msg = te->tx.buf; -+ /* Set the number of sensors to be skipped/already read */ -+ msg->id = cpu_to_le32(s->id); -+ msg->axis_desc_index = cpu_to_le32(desc_index); -+ -+ ret = scmi_do_xfer(handle, te); -+ if (ret) -+ break; -+ -+ flags = le32_to_cpu(buf->num_axis_flags); -+ num_returned = NUM_AXIS_RETURNED(flags); -+ num_remaining = NUM_AXIS_REMAINING(flags); -+ -+ if (desc_index + num_returned > s->num_axis) { -+ dev_err(handle->dev, "No. of axis can't exceed %d\n", -+ s->num_axis); -+ break; -+ } -+ -+ adesc = &buf->desc[0]; -+ for (cnt = 0; cnt < num_returned; cnt++) { -+ u32 attrh, attrl; -+ struct scmi_sensor_axis_info *a; -+ size_t dsize = SCMI_MSG_RESP_AXIS_DESCR_BASE_SZ; -+ -+ attrl = le32_to_cpu(adesc->attributes_low); -+ -+ a = &s->axis[desc_index + cnt]; -+ -+ a->id = le32_to_cpu(adesc->id); -+ a->extended_attrs = SUPPORTS_EXTEND_ATTRS(attrl); -+ -+ attrh = le32_to_cpu(adesc->attributes_high); -+ a->scale = S32_EXT(SENSOR_SCALE(attrh)); -+ a->type = SENSOR_TYPE(attrh); -+ strlcpy(a->name, adesc->name, SCMI_MAX_STR_SIZE); -+ -+ if (a->extended_attrs) { -+ unsigned int ares = -+ le32_to_cpu(adesc->resolution); -+ -+ a->resolution = SENSOR_RES(ares); -+ a->exponent = -+ S32_EXT(SENSOR_RES_EXP(ares)); -+ dsize += sizeof(adesc->resolution); -+ -+ scmi_parse_range_attrs(&a->attrs, -+ &adesc->attrs); -+ dsize += sizeof(adesc->attrs); -+ } -+ -+ adesc = (typeof(adesc))((u8 *)adesc + dsize); -+ } -+ -+ desc_index += num_returned; -+ -+ scmi_reset_rx_to_maxsz(handle, te); -+ /* -+ * check for both returned and remaining to avoid infinite -+ * loop due to buggy firmware -+ */ -+ } while (num_returned && num_remaining); -+ -+ scmi_xfer_put(handle, te); -+ return ret; -+} -+ - static int scmi_sensor_description_get(const struct scmi_handle *handle, - struct sensors_info *si) - { -@@ -131,9 +402,10 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle, - buf = t->rx.buf; - - do { -+ struct scmi_sensor_descriptor *sdesc; -+ - /* Set the number of sensors to be skipped/already read */ - put_unaligned_le32(desc_index, t->tx.buf); -- - ret = scmi_do_xfer(handle, t); - if (ret) - break; -@@ -147,22 +419,97 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle, - break; - } - -+ sdesc = &buf->desc[0]; - for (cnt = 0; cnt < num_returned; cnt++) { - u32 attrh, attrl; - struct scmi_sensor_info *s; -+ size_t dsize = SCMI_MSG_RESP_SENS_DESCR_BASE_SZ; - -- attrl = le32_to_cpu(buf->desc[cnt].attributes_low); -- attrh = le32_to_cpu(buf->desc[cnt].attributes_high); - s = &si->sensors[desc_index + cnt]; -- s->id = le32_to_cpu(buf->desc[cnt].id); -- s->type = SENSOR_TYPE(attrh); -- s->scale = SENSOR_SCALE(attrh); -- /* Sign extend to a full s8 */ -- if (s->scale & SENSOR_SCALE_SIGN) -- s->scale |= SENSOR_SCALE_EXTEND; -+ s->id = le32_to_cpu(sdesc->id); -+ -+ attrl = le32_to_cpu(sdesc->attributes_low); -+ /* common bitfields parsing */ - s->async = SUPPORTS_ASYNC_READ(attrl); - s->num_trip_points = NUM_TRIP_POINTS(attrl); -- strlcpy(s->name, buf->desc[cnt].name, SCMI_MAX_STR_SIZE); -+ /** -+ * only SCMIv3.0 specific bitfield below. -+ * Such bitfields are assumed to be zeroed on non -+ * relevant fw versions...assuming fw not buggy ! -+ */ -+ s->update = SUPPORTS_UPDATE_NOTIFY(attrl); -+ s->timestamped = SUPPORTS_TIMESTAMP(attrl); -+ if (s->timestamped) -+ s->tstamp_scale = -+ S32_EXT(SENSOR_TSTAMP_EXP(attrl)); -+ s->extended_scalar_attrs = -+ SUPPORTS_EXTEND_ATTRS(attrl); -+ -+ attrh = le32_to_cpu(sdesc->attributes_high); -+ /* common bitfields parsing */ -+ s->scale = S32_EXT(SENSOR_SCALE(attrh)); -+ s->type = SENSOR_TYPE(attrh); -+ /* Use pre-allocated pool wherever possible */ -+ s->intervals.desc = s->intervals.prealloc_pool; -+ if (si->version == SCMIv2_SENSOR_PROTOCOL) { -+ s->intervals.segmented = false; -+ s->intervals.count = 1; -+ /* -+ * Convert SCMIv2.0 update interval format to -+ * SCMIv3.0 to be used as the common exposed -+ * descriptor, accessible via common macros. -+ */ -+ s->intervals.desc[0] = -+ (SENSOR_UPDATE_BASE(attrh) << 5) | -+ SENSOR_UPDATE_SCALE(attrh); -+ } else { -+ /* -+ * From SCMIv3.0 update intervals are retrieved -+ * via a dedicated (optional) command. -+ * Since the command is optional, on error carry -+ * on without any update interval. -+ */ -+ if (scmi_sensor_update_intervals(handle, s)) -+ dev_dbg(handle->dev, -+ "Update Intervals not available for sensor ID:%d\n", -+ s->id); -+ } -+ /** -+ * only > SCMIv2.0 specific bitfield below. -+ * Such bitfields are assumed to be zeroed on non -+ * relevant fw versions...assuming fw not buggy ! -+ */ -+ s->num_axis = min_t(unsigned int, -+ SUPPORTS_AXIS(attrh) ? -+ SENSOR_AXIS_NUMBER(attrh) : 0, -+ SCMI_MAX_NUM_SENSOR_AXIS); -+ strlcpy(s->name, sdesc->name, SCMI_MAX_STR_SIZE); -+ -+ if (s->extended_scalar_attrs) { -+ s->sensor_power = le32_to_cpu(sdesc->power); -+ dsize += sizeof(sdesc->power); -+ /* Only for sensors reporting scalar values */ -+ if (s->num_axis == 0) { -+ unsigned int sres = -+ le32_to_cpu(sdesc->resolution); -+ -+ s->resolution = SENSOR_RES(sres); -+ s->exponent = -+ S32_EXT(SENSOR_RES_EXP(sres)); -+ dsize += sizeof(sdesc->resolution); -+ -+ scmi_parse_range_attrs(&s->scalar_attrs, -+ &sdesc->scalar_attrs); -+ dsize += sizeof(sdesc->scalar_attrs); -+ } -+ } -+ if (s->num_axis > 0) { -+ ret = scmi_sensor_axis_description(handle, s); -+ if (ret) -+ goto out; -+ } -+ -+ sdesc = (typeof(sdesc))((u8 *)sdesc + dsize); - } - - desc_index += num_returned; -@@ -174,6 +521,7 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle, - */ - } while (num_returned && num_remaining); - -+out: - scmi_xfer_put(handle, t); - return ret; - } -diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h -index 9cd312a1ff92..0792b0be25a3 100644 ---- a/include/linux/scmi_protocol.h -+++ b/include/linux/scmi_protocol.h -@@ -8,6 +8,7 @@ - #ifndef _LINUX_SCMI_PROTOCOL_H - #define _LINUX_SCMI_PROTOCOL_H - -+#include <linux/bitfield.h> - #include <linux/device.h> - #include <linux/notifier.h> - #include <linux/types.h> -@@ -148,13 +149,135 @@ struct scmi_power_ops { - u32 *state); - }; - -+/** -+ * scmi_range_attrs - specifies a sensor or axis values' range -+ * @min_range: The minimum value which can be represented by the sensor/axis. -+ * @max_range: The maximum value which can be represented by the sensor/axis. -+ */ -+struct scmi_range_attrs { -+ long long min_range; -+ long long max_range; -+}; -+ -+/** -+ * scmi_sensor_axis_info - describes one sensor axes -+ * @id: The axes ID. -+ * @type: Axes type. Chosen amongst one of @enum scmi_sensor_class. -+ * @scale: Power-of-10 multiplier applied to the axis unit. -+ * @name: NULL-terminated string representing axes name as advertised by -+ * SCMI platform. -+ * @extended_attrs: Flag to indicate the presence of additional extended -+ * attributes for this axes. -+ * @resolution: Extended attribute representing the resolution of the axes. -+ * Set to 0 if not reported by this axes. -+ * @exponent: Extended attribute representing the power-of-10 multiplier that -+ * is applied to the resolution field. Set to 0 if not reported by -+ * this axes. -+ * @attrs: Extended attributes representing minimum and maximum values -+ * measurable by this axes. Set to 0 if not reported by this sensor. -+ */ -+struct scmi_sensor_axis_info { -+ unsigned int id; -+ unsigned int type; -+ int scale; -+ char name[SCMI_MAX_STR_SIZE]; -+ bool extended_attrs; -+ unsigned int resolution; -+ int exponent; -+ struct scmi_range_attrs attrs; -+}; -+ -+/** -+ * scmi_sensor_intervals_info - describes number and type of available update -+ * intervals -+ * @segmented: Flag for segmented intervals' representation. When True there -+ * will be exactly 3 intervals in @desc, with each entry -+ * representing a member of a segment in this order: -+ * {lowest update interval, highest update interval, step size} -+ * @count: Number of intervals described in @desc. -+ * @desc: Array of @count interval descriptor bitmask represented as detailed in -+ * the SCMI specification: it can be accessed using the accompanying -+ * macros. -+ * @prealloc_pool: A minimal preallocated pool of desc entries used to avoid -+ * lesser-than-64-bytes dynamic allocation for small @count -+ * values. -+ */ -+struct scmi_sensor_intervals_info { -+ bool segmented; -+ unsigned int count; -+#define SCMI_SENS_INTVL_SEGMENT_LOW 0 -+#define SCMI_SENS_INTVL_SEGMENT_HIGH 1 -+#define SCMI_SENS_INTVL_SEGMENT_STEP 2 -+ unsigned int *desc; -+#define SCMI_SENS_INTVL_GET_SECS(x) FIELD_GET(GENMASK(20, 5), (x)) -+#define SCMI_SENS_INTVL_GET_EXP(x) \ -+ ({ \ -+ int __signed_exp = FIELD_GET(GENMASK(4, 0), (x)); \ -+ \ -+ if (__signed_exp & BIT(4)) \ -+ __signed_exp |= GENMASK(31, 5); \ -+ __signed_exp; \ -+ }) -+#define SCMI_MAX_PREALLOC_POOL 16 -+ unsigned int prealloc_pool[SCMI_MAX_PREALLOC_POOL]; -+}; -+ -+/** -+ * struct scmi_sensor_info - represents information related to one of the -+ * available sensors. -+ * @id: Sensor ID. -+ * @type: Sensor type. Chosen amongst one of @enum scmi_sensor_class. -+ * @scale: Power-of-10 multiplier applied to the sensor unit. -+ * @num_trip_points: Number of maximum configurable trip points. -+ * @async: Flag for asynchronous read support. -+ * @update: Flag for continuouos update notification support. -+ * @timestamped: Flag for timestamped read support. -+ * @tstamp_scale: Power-of-10 multiplier applied to the sensor timestamps to -+ * represent it in seconds. -+ * @num_axis: Number of supported axis if any. Reported as 0 for scalar sensors. -+ * @axis: Pointer to an array of @num_axis descriptors. -+ * @intervals: Descriptor of available update intervals. -+ * @sensor_config: A bitmask reporting the current sensor configuration as -+ * detailed in the SCMI specification: it can accessed and -+ * modified through the accompanying macros. -+ * @name: NULL-terminated string representing sensor name as advertised by -+ * SCMI platform. -+ * @extended_scalar_attrs: Flag to indicate the presence of additional extended -+ * attributes for this sensor. -+ * @sensor_power: Extended attribute representing the average power -+ * consumed by the sensor in microwatts (uW) when it is active. -+ * Reported here only for scalar sensors. -+ * Set to 0 if not reported by this sensor. -+ * @resolution: Extended attribute representing the resolution of the sensor. -+ * Reported here only for scalar sensors. -+ * Set to 0 if not reported by this sensor. -+ * @exponent: Extended attribute representing the power-of-10 multiplier that is -+ * applied to the resolution field. -+ * Reported here only for scalar sensors. -+ * Set to 0 if not reported by this sensor. -+ * @scalar_attrs: Extended attributes representing minimum and maximum -+ * measurable values by this sensor. -+ * Reported here only for scalar sensors. -+ * Set to 0 if not reported by this sensor. -+ */ - struct scmi_sensor_info { -- u32 id; -- u8 type; -- s8 scale; -- u8 num_trip_points; -+ unsigned int id; -+ unsigned int type; -+ int scale; -+ unsigned int num_trip_points; - bool async; -+ bool update; -+ bool timestamped; -+ int tstamp_scale; -+ unsigned int num_axis; -+ struct scmi_sensor_axis_info *axis; -+ struct scmi_sensor_intervals_info intervals; - char name[SCMI_MAX_STR_SIZE]; -+ bool extended_scalar_attrs; -+ unsigned int sensor_power; -+ unsigned int resolution; -+ int exponent; -+ struct scmi_range_attrs scalar_attrs; - }; - - /* -@@ -163,11 +286,100 @@ struct scmi_sensor_info { - */ - enum scmi_sensor_class { - NONE = 0x0, -+ UNSPEC = 0x1, - TEMPERATURE_C = 0x2, -+ TEMPERATURE_F = 0x3, -+ TEMPERATURE_K = 0x4, - VOLTAGE = 0x5, - CURRENT = 0x6, - POWER = 0x7, - ENERGY = 0x8, -+ CHARGE = 0x9, -+ VOLTAMPERE = 0xA, -+ NITS = 0xB, -+ LUMENS = 0xC, -+ LUX = 0xD, -+ CANDELAS = 0xE, -+ KPA = 0xF, -+ PSI = 0x10, -+ NEWTON = 0x11, -+ CFM = 0x12, -+ RPM = 0x13, -+ HERTZ = 0x14, -+ SECS = 0x15, -+ MINS = 0x16, -+ HOURS = 0x17, -+ DAYS = 0x18, -+ WEEKS = 0x19, -+ MILS = 0x1A, -+ INCHES = 0x1B, -+ FEET = 0x1C, -+ CUBIC_INCHES = 0x1D, -+ CUBIC_FEET = 0x1E, -+ METERS = 0x1F, -+ CUBIC_CM = 0x20, -+ CUBIC_METERS = 0x21, -+ LITERS = 0x22, -+ FLUID_OUNCES = 0x23, -+ RADIANS = 0x24, -+ STERADIANS = 0x25, -+ REVOLUTIONS = 0x26, -+ CYCLES = 0x27, -+ GRAVITIES = 0x28, -+ OUNCES = 0x29, -+ POUNDS = 0x2A, -+ FOOT_POUNDS = 0x2B, -+ OUNCE_INCHES = 0x2C, -+ GAUSS = 0x2D, -+ GILBERTS = 0x2E, -+ HENRIES = 0x2F, -+ FARADS = 0x30, -+ OHMS = 0x31, -+ SIEMENS = 0x32, -+ MOLES = 0x33, -+ BECQUERELS = 0x34, -+ PPM = 0x35, -+ DECIBELS = 0x36, -+ DBA = 0x37, -+ DBC = 0x38, -+ GRAYS = 0x39, -+ SIEVERTS = 0x3A, -+ COLOR_TEMP_K = 0x3B, -+ BITS = 0x3C, -+ BYTES = 0x3D, -+ WORDS = 0x3E, -+ DWORDS = 0x3F, -+ QWORDS = 0x40, -+ PERCENTAGE = 0x41, -+ PASCALS = 0x42, -+ COUNTS = 0x43, -+ GRAMS = 0x44, -+ NEWTON_METERS = 0x45, -+ HITS = 0x46, -+ MISSES = 0x47, -+ RETRIES = 0x48, -+ OVERRUNS = 0x49, -+ UNDERRUNS = 0x4A, -+ COLLISIONS = 0x4B, -+ PACKETS = 0x4C, -+ MESSAGES = 0x4D, -+ CHARS = 0x4E, -+ ERRORS = 0x4F, -+ CORRECTED_ERRS = 0x50, -+ UNCORRECTABLE_ERRS = 0x51, -+ SQ_MILS = 0x52, -+ SQ_INCHES = 0x53, -+ SQ_FEET = 0x54, -+ SQ_CM = 0x55, -+ SQ_METERS = 0x56, -+ RADIANS_SEC = 0x57, -+ BPM = 0x58, -+ METERS_SEC_SQUARED = 0x59, -+ METERS_SEC = 0x5A, -+ CUBIC_METERS_SEC = 0x5B, -+ MM_MERCURY = 0x5C, -+ RADIANS_SEC_SQUARED = 0x5D, -+ OEM_UNIT = 0xFF - }; - - /** diff --git a/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0003-hwmon-scmi-update-hwmon-internal-scale-data-type.patch b/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0003-hwmon-scmi-update-hwmon-internal-scale-data-type.patch deleted file mode 100644 index efc3bf1d..00000000 --- a/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0003-hwmon-scmi-update-hwmon-internal-scale-data-type.patch +++ /dev/null @@ -1,30 +0,0 @@ -From f32f6399b8a0a72c9e6c5c824a19f09f78f17c13 Mon Sep 17 00:00:00 2001 -From: Cristian Marussi <cristian.marussi@arm.com> -Date: Thu, 19 Nov 2020 17:49:03 +0000 -Subject: [PATCH] hwmon: scmi: update hwmon internal scale data type - -Use an int to calculate scale values inside scmi_hwmon_scale() to match -the updated scale data type in struct scmi_sensor_info. - -Cc: linux-hwmon@vger.kernel.org -Cc: Guenter Roeck <linux@roeck-us.net> -Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> -Acked-by: Guenter Roeck <linux@roeck-us.net> -Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> ---- - drivers/hwmon/scmi-hwmon.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/drivers/hwmon/scmi-hwmon.c b/drivers/hwmon/scmi-hwmon.c -index 09ce30cba54b..17d064e58938 100644 ---- a/drivers/hwmon/scmi-hwmon.c -+++ b/drivers/hwmon/scmi-hwmon.c -@@ -30,7 +30,7 @@ static inline u64 __pow10(u8 x) - - static int scmi_hwmon_scale(const struct scmi_sensor_info *sensor, u64 *value) - { -- s8 scale = sensor->scale; -+ int scale = sensor->scale; - u64 f; - - switch (sensor->type) { diff --git a/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0004-firmware-arm_scmi-add-SCMIv3.0-Sensors-timestamped-r.patch b/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0004-firmware-arm_scmi-add-SCMIv3.0-Sensors-timestamped-r.patch deleted file mode 100644 index e8839d95..00000000 --- a/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0004-firmware-arm_scmi-add-SCMIv3.0-Sensors-timestamped-r.patch +++ /dev/null @@ -1,236 +0,0 @@ -From bb48061a3f1edd4203518aa4b8a021ae5d1582a4 Mon Sep 17 00:00:00 2001 -From: Cristian Marussi <cristian.marussi@arm.com> -Date: Thu, 19 Nov 2020 17:49:04 +0000 -Subject: [PATCH] firmware: arm_scmi: add SCMIv3.0 Sensors timestamped reads - -Add new .reading_get_timestamped() method to sensor_ops to support SCMIv3.0 -timestamped reads. - -Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> -Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> ---- - drivers/firmware/arm_scmi/sensors.c | 127 ++++++++++++++++++++++++++-- - include/linux/scmi_protocol.h | 22 +++++ - 2 files changed, 143 insertions(+), 6 deletions(-) - -diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c -index a85827f60a02..2239af5f9e6e 100644 ---- a/drivers/firmware/arm_scmi/sensors.c -+++ b/drivers/firmware/arm_scmi/sensors.c -@@ -155,6 +155,23 @@ struct scmi_msg_sensor_reading_get { - #define SENSOR_READ_ASYNC BIT(0) - }; - -+struct scmi_resp_sensor_reading_complete { -+ __le32 id; -+ __le64 readings; -+}; -+ -+struct scmi_sensor_reading_le { -+ __le32 sensor_value_low; -+ __le32 sensor_value_high; -+ __le32 timestamp_low; -+ __le32 timestamp_high; -+}; -+ -+struct scmi_resp_sensor_reading_complete_v3 { -+ __le32 id; -+ struct scmi_sensor_reading_le readings[]; -+}; -+ - struct scmi_sensor_trip_notify_payld { - __le32 agent_id; - __le32 sensor_id; -@@ -575,6 +592,21 @@ scmi_sensor_trip_point_config(const struct scmi_handle *handle, u32 sensor_id, - return ret; - } - -+/** -+ * scmi_sensor_reading_get - Read scalar sensor value -+ * @handle: Platform handle -+ * @sensor_id: Sensor ID -+ * @value: The 64bit value sensor reading -+ * -+ * This function returns a single 64 bit reading value representing the sensor -+ * value; if the platform SCMI Protocol implementation and the sensor support -+ * multiple axis and timestamped-reads, this just returns the first axis while -+ * dropping the timestamp value. -+ * Use instead the @scmi_sensor_reading_get_timestamped to retrieve the array of -+ * timestamped multi-axis values. -+ * -+ * Return: 0 on Success -+ */ - static int scmi_sensor_reading_get(const struct scmi_handle *handle, - u32 sensor_id, u64 *value) - { -@@ -585,20 +617,24 @@ static int scmi_sensor_reading_get(const struct scmi_handle *handle, - struct scmi_sensor_info *s = si->sensors + sensor_id; - - ret = scmi_xfer_get_init(handle, SENSOR_READING_GET, -- SCMI_PROTOCOL_SENSOR, sizeof(*sensor), -- sizeof(u64), &t); -+ SCMI_PROTOCOL_SENSOR, sizeof(*sensor), 0, &t); - if (ret) - return ret; - - sensor = t->tx.buf; - sensor->id = cpu_to_le32(sensor_id); -- - if (s->async) { - sensor->flags = cpu_to_le32(SENSOR_READ_ASYNC); - ret = scmi_do_xfer_with_response(handle, t); -- if (!ret) -- *value = get_unaligned_le64((void *) -- ((__le32 *)t->rx.buf + 1)); -+ if (!ret) { -+ struct scmi_resp_sensor_reading_complete *resp; -+ -+ resp = t->rx.buf; -+ if (le32_to_cpu(resp->id) == sensor_id) -+ *value = get_unaligned_le64(&resp->readings); -+ else -+ ret = -EPROTO; -+ } - } else { - sensor->flags = cpu_to_le32(0); - ret = scmi_do_xfer(handle, t); -@@ -610,6 +646,84 @@ static int scmi_sensor_reading_get(const struct scmi_handle *handle, - return ret; - } - -+static inline void -+scmi_parse_sensor_readings(struct scmi_sensor_reading *out, -+ const struct scmi_sensor_reading_le *in) -+{ -+ out->value = get_unaligned_le64((void *)&in->sensor_value_low); -+ out->timestamp = get_unaligned_le64((void *)&in->timestamp_low); -+} -+ -+/** -+ * scmi_sensor_reading_get_timestamped - Read multiple-axis timestamped values -+ * @handle: Platform handle -+ * @sensor_id: Sensor ID -+ * @count: The length of the provided @readings array -+ * @readings: An array of elements each representing a timestamped per-axis -+ * reading of type @struct scmi_sensor_reading. -+ * Returned readings are ordered as the @axis descriptors array -+ * included in @struct scmi_sensor_info and the max number of -+ * returned elements is min(@count, @num_axis); ideally the provided -+ * array should be of length @count equal to @num_axis. -+ * -+ * Return: 0 on Success -+ */ -+static int -+scmi_sensor_reading_get_timestamped(const struct scmi_handle *handle, -+ u32 sensor_id, u8 count, -+ struct scmi_sensor_reading *readings) -+{ -+ int ret; -+ struct scmi_xfer *t; -+ struct scmi_msg_sensor_reading_get *sensor; -+ struct sensors_info *si = handle->sensor_priv; -+ struct scmi_sensor_info *s = si->sensors + sensor_id; -+ -+ if (!count || !readings || -+ (!s->num_axis && count > 1) || (s->num_axis && count > s->num_axis)) -+ return -EINVAL; -+ -+ ret = scmi_xfer_get_init(handle, SENSOR_READING_GET, -+ SCMI_PROTOCOL_SENSOR, sizeof(*sensor), 0, &t); -+ if (ret) -+ return ret; -+ -+ sensor = t->tx.buf; -+ sensor->id = cpu_to_le32(sensor_id); -+ if (s->async) { -+ sensor->flags = cpu_to_le32(SENSOR_READ_ASYNC); -+ ret = scmi_do_xfer_with_response(handle, t); -+ if (!ret) { -+ int i; -+ struct scmi_resp_sensor_reading_complete_v3 *resp; -+ -+ resp = t->rx.buf; -+ /* Retrieve only the number of requested axis anyway */ -+ if (le32_to_cpu(resp->id) == sensor_id) -+ for (i = 0; i < count; i++) -+ scmi_parse_sensor_readings(&readings[i], -+ &resp->readings[i]); -+ else -+ ret = -EPROTO; -+ } -+ } else { -+ sensor->flags = cpu_to_le32(0); -+ ret = scmi_do_xfer(handle, t); -+ if (!ret) { -+ int i; -+ struct scmi_sensor_reading_le *resp_readings; -+ -+ resp_readings = t->rx.buf; -+ for (i = 0; i < count; i++) -+ scmi_parse_sensor_readings(&readings[i], -+ &resp_readings[i]); -+ } -+ } -+ -+ scmi_xfer_put(handle, t); -+ return ret; -+} -+ - static const struct scmi_sensor_info * - scmi_sensor_info_get(const struct scmi_handle *handle, u32 sensor_id) - { -@@ -630,6 +744,7 @@ static const struct scmi_sensor_ops sensor_ops = { - .info_get = scmi_sensor_info_get, - .trip_point_config = scmi_sensor_trip_point_config, - .reading_get = scmi_sensor_reading_get, -+ .reading_get_timestamped = scmi_sensor_reading_get_timestamped, - }; - - static int scmi_sensor_set_notify_enabled(const struct scmi_handle *handle, -diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h -index 0792b0be25a3..0c52bf0cbee4 100644 ---- a/include/linux/scmi_protocol.h -+++ b/include/linux/scmi_protocol.h -@@ -149,6 +149,20 @@ struct scmi_power_ops { - u32 *state); - }; - -+/** -+ * scmi_sensor_reading - represent a timestamped read -+ * -+ * Used by @reading_get_timestamped method. -+ * -+ * @value: The signed value sensor read. -+ * @timestamp: An unsigned timestamp for the sensor read, as provided by -+ * SCMI platform. Set to zero when not available. -+ */ -+struct scmi_sensor_reading { -+ long long value; -+ unsigned long long timestamp; -+}; -+ - /** - * scmi_range_attrs - specifies a sensor or axis values' range - * @min_range: The minimum value which can be represented by the sensor/axis. -@@ -390,6 +404,11 @@ enum scmi_sensor_class { - * @info_get: get the information of the specified sensor - * @trip_point_config: selects and configures a trip-point of interest - * @reading_get: gets the current value of the sensor -+ * @reading_get_timestamped: gets the current value and timestamp, when -+ * available, of the sensor. (as of v3.0 spec) -+ * Supports multi-axis sensors for sensors which -+ * supports it and if the @reading array size of -+ * @count entry equals the sensor num_axis - */ - struct scmi_sensor_ops { - int (*count_get)(const struct scmi_handle *handle); -@@ -399,6 +418,9 @@ struct scmi_sensor_ops { - u32 sensor_id, u8 trip_id, u64 trip_value); - int (*reading_get)(const struct scmi_handle *handle, u32 sensor_id, - u64 *value); -+ int (*reading_get_timestamped)(const struct scmi_handle *handle, -+ u32 sensor_id, u8 count, -+ struct scmi_sensor_reading *readings); - }; - - /** diff --git a/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0005-firmware-arm_scmi-add-SCMIv3.0-Sensor-configuration-.patch b/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0005-firmware-arm_scmi-add-SCMIv3.0-Sensor-configuration-.patch deleted file mode 100644 index 57095fe9..00000000 --- a/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0005-firmware-arm_scmi-add-SCMIv3.0-Sensor-configuration-.patch +++ /dev/null @@ -1,172 +0,0 @@ -From 3c8f7becd835fc70aee188ad77655a3fdf5a169c Mon Sep 17 00:00:00 2001 -From: Cristian Marussi <cristian.marussi@arm.com> -Date: Thu, 19 Nov 2020 17:49:05 +0000 -Subject: [PATCH] firmware: arm_scmi: add SCMIv3.0 Sensor configuration support - -Add SCMIv3.0 Sensor support for CONFIG_GET/CONFIG_SET commands. - -Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> -Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> ---- - drivers/firmware/arm_scmi/sensors.c | 63 +++++++++++++++++++++++++++++ - include/linux/scmi_protocol.h | 37 +++++++++++++++++ - 2 files changed, 100 insertions(+) - -diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c -index 2239af5f9e6e..10c271d430e7 100644 ---- a/drivers/firmware/arm_scmi/sensors.c -+++ b/drivers/firmware/arm_scmi/sensors.c -@@ -23,6 +23,8 @@ enum scmi_sensor_protocol_cmd { - SENSOR_READING_GET = 0x6, - SENSOR_AXIS_DESCRIPTION_GET = 0x7, - SENSOR_LIST_UPDATE_INTERVALS = 0x8, -+ SENSOR_CONFIG_GET = 0x9, -+ SENSOR_CONFIG_SET = 0xA, - }; - - struct scmi_msg_resp_sensor_attributes { -@@ -149,6 +151,11 @@ struct scmi_msg_set_sensor_trip_point { - __le32 value_high; - }; - -+struct scmi_msg_sensor_config_set { -+ __le32 id; -+ __le32 sensor_config; -+}; -+ - struct scmi_msg_sensor_reading_get { - __le32 id; - __le32 flags; -@@ -592,6 +599,60 @@ scmi_sensor_trip_point_config(const struct scmi_handle *handle, u32 sensor_id, - return ret; - } - -+static int scmi_sensor_config_get(const struct scmi_handle *handle, -+ u32 sensor_id, u32 *sensor_config) -+{ -+ int ret; -+ struct scmi_xfer *t; -+ -+ ret = scmi_xfer_get_init(handle, SENSOR_CONFIG_GET, -+ SCMI_PROTOCOL_SENSOR, sizeof(__le32), -+ sizeof(__le32), &t); -+ if (ret) -+ return ret; -+ -+ put_unaligned_le32(cpu_to_le32(sensor_id), t->tx.buf); -+ ret = scmi_do_xfer(handle, t); -+ if (!ret) { -+ struct sensors_info *si = handle->sensor_priv; -+ struct scmi_sensor_info *s = si->sensors + sensor_id; -+ -+ *sensor_config = get_unaligned_le64(t->rx.buf); -+ s->sensor_config = *sensor_config; -+ } -+ -+ scmi_xfer_put(handle, t); -+ return ret; -+} -+ -+static int scmi_sensor_config_set(const struct scmi_handle *handle, -+ u32 sensor_id, u32 sensor_config) -+{ -+ int ret; -+ struct scmi_xfer *t; -+ struct scmi_msg_sensor_config_set *msg; -+ -+ ret = scmi_xfer_get_init(handle, SENSOR_CONFIG_SET, -+ SCMI_PROTOCOL_SENSOR, sizeof(*msg), 0, &t); -+ if (ret) -+ return ret; -+ -+ msg = t->tx.buf; -+ msg->id = cpu_to_le32(sensor_id); -+ msg->sensor_config = cpu_to_le32(sensor_config); -+ -+ ret = scmi_do_xfer(handle, t); -+ if (!ret) { -+ struct sensors_info *si = handle->sensor_priv; -+ struct scmi_sensor_info *s = si->sensors + sensor_id; -+ -+ s->sensor_config = sensor_config; -+ } -+ -+ scmi_xfer_put(handle, t); -+ return ret; -+} -+ - /** - * scmi_sensor_reading_get - Read scalar sensor value - * @handle: Platform handle -@@ -745,6 +806,8 @@ static const struct scmi_sensor_ops sensor_ops = { - .trip_point_config = scmi_sensor_trip_point_config, - .reading_get = scmi_sensor_reading_get, - .reading_get_timestamped = scmi_sensor_reading_get_timestamped, -+ .config_get = scmi_sensor_config_get, -+ .config_set = scmi_sensor_config_set, - }; - - static int scmi_sensor_set_notify_enabled(const struct scmi_handle *handle, -diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h -index 0c52bf0cbee4..7e9e2cd3d46b 100644 ---- a/include/linux/scmi_protocol.h -+++ b/include/linux/scmi_protocol.h -@@ -286,7 +286,38 @@ struct scmi_sensor_info { - unsigned int num_axis; - struct scmi_sensor_axis_info *axis; - struct scmi_sensor_intervals_info intervals; -+ unsigned int sensor_config; -+#define SCMI_SENS_CFG_UPDATE_SECS_MASK GENMASK(31, 16) -+#define SCMI_SENS_CFG_GET_UPDATE_SECS(x) \ -+ FIELD_GET(SCMI_SENS_CFG_UPDATE_SECS_MASK, (x)) -+ -+#define SCMI_SENS_CFG_UPDATE_EXP_MASK GENMASK(15, 11) -+#define SCMI_SENS_CFG_GET_UPDATE_EXP(x) \ -+ ({ \ -+ int __signed_exp = \ -+ FIELD_GET(SCMI_SENS_CFG_UPDATE_EXP_MASK, (x)); \ -+ \ -+ if (__signed_exp & BIT(4)) \ -+ __signed_exp |= GENMASK(31, 5); \ -+ __signed_exp; \ -+ }) -+ -+#define SCMI_SENS_CFG_ROUND_MASK GENMASK(10, 9) -+#define SCMI_SENS_CFG_ROUND_AUTO 2 -+#define SCMI_SENS_CFG_ROUND_UP 1 -+#define SCMI_SENS_CFG_ROUND_DOWN 0 -+ -+#define SCMI_SENS_CFG_TSTAMP_ENABLED_MASK BIT(1) -+#define SCMI_SENS_CFG_TSTAMP_ENABLE 1 -+#define SCMI_SENS_CFG_TSTAMP_DISABLE 0 -+#define SCMI_SENS_CFG_IS_TSTAMP_ENABLED(x) \ -+ FIELD_GET(SCMI_SENS_CFG_TSTAMP_ENABLED_MASK, (x)) -+ -+#define SCMI_SENS_CFG_SENSOR_ENABLED_MASK BIT(0) -+#define SCMI_SENS_CFG_SENSOR_ENABLE 1 -+#define SCMI_SENS_CFG_SENSOR_DISABLE 0 - char name[SCMI_MAX_STR_SIZE]; -+#define SCMI_SENS_CFG_IS_ENABLED(x) FIELD_GET(BIT(0), (x)) - bool extended_scalar_attrs; - unsigned int sensor_power; - unsigned int resolution; -@@ -409,6 +440,8 @@ enum scmi_sensor_class { - * Supports multi-axis sensors for sensors which - * supports it and if the @reading array size of - * @count entry equals the sensor num_axis -+ * @config_get: Get sensor current configuration -+ * @config_set: Set sensor current configuration - */ - struct scmi_sensor_ops { - int (*count_get)(const struct scmi_handle *handle); -@@ -421,6 +454,10 @@ struct scmi_sensor_ops { - int (*reading_get_timestamped)(const struct scmi_handle *handle, - u32 sensor_id, u8 count, - struct scmi_sensor_reading *readings); -+ int (*config_get)(const struct scmi_handle *handle, -+ u32 sensor_id, u32 *sensor_config); -+ int (*config_set)(const struct scmi_handle *handle, -+ u32 sensor_id, u32 sensor_config); - }; - - /** diff --git a/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0006-firmware-arm_scmi-add-SCMIv3.0-Sensor-notifications.patch b/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0006-firmware-arm_scmi-add-SCMIv3.0-Sensor-notifications.patch deleted file mode 100644 index e8c8f420..00000000 --- a/meta-egvirt/recipes-kernel/linux/linux-yocto/scmi/0006-firmware-arm_scmi-add-SCMIv3.0-Sensor-notifications.patch +++ /dev/null @@ -1,234 +0,0 @@ -From 53a49c0e12be913ecb81c55e6ee1f214704043cc Mon Sep 17 00:00:00 2001 -From: Cristian Marussi <cristian.marussi@arm.com> -Date: Thu, 19 Nov 2020 17:49:06 +0000 -Subject: [PATCH] firmware: arm_scmi: add SCMIv3.0 Sensor notifications - -Add support for new SCMIv3.0 SENSOR_UPDATE notification. - -Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> -Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> ---- - drivers/firmware/arm_scmi/sensors.c | 124 +++++++++++++++++++++++----- - include/linux/scmi_protocol.h | 9 ++ - 2 files changed, 114 insertions(+), 19 deletions(-) - -diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c -index 10c271d430e7..b3d7c08c09a0 100644 ---- a/drivers/firmware/arm_scmi/sensors.c -+++ b/drivers/firmware/arm_scmi/sensors.c -@@ -25,6 +25,7 @@ enum scmi_sensor_protocol_cmd { - SENSOR_LIST_UPDATE_INTERVALS = 0x8, - SENSOR_CONFIG_GET = 0x9, - SENSOR_CONFIG_SET = 0xA, -+ SENSOR_CONTINUOUS_UPDATE_NOTIFY = 0xB, - }; - - struct scmi_msg_resp_sensor_attributes { -@@ -132,10 +133,10 @@ struct scmi_msg_resp_sensor_list_update_intervals { - __le32 intervals[]; - }; - --struct scmi_msg_sensor_trip_point_notify { -+struct scmi_msg_sensor_request_notify { - __le32 id; - __le32 event_control; --#define SENSOR_TP_NOTIFY_ALL BIT(0) -+#define SENSOR_NOTIFY_ALL BIT(0) - }; - - struct scmi_msg_set_sensor_trip_point { -@@ -185,6 +186,12 @@ struct scmi_sensor_trip_notify_payld { - __le32 trip_point_desc; - }; - -+struct scmi_sensor_update_notify_payld { -+ __le32 agent_id; -+ __le32 sensor_id; -+ struct scmi_sensor_reading_le readings[]; -+}; -+ - struct sensors_info { - u32 version; - int num_sensors; -@@ -550,15 +557,16 @@ static int scmi_sensor_description_get(const struct scmi_handle *handle, - return ret; - } - --static int scmi_sensor_trip_point_notify(const struct scmi_handle *handle, -- u32 sensor_id, bool enable) -+static inline int -+scmi_sensor_request_notify(const struct scmi_handle *handle, u32 sensor_id, -+ u8 message_id, bool enable) - { - int ret; -- u32 evt_cntl = enable ? SENSOR_TP_NOTIFY_ALL : 0; -+ u32 evt_cntl = enable ? SENSOR_NOTIFY_ALL : 0; - struct scmi_xfer *t; -- struct scmi_msg_sensor_trip_point_notify *cfg; -+ struct scmi_msg_sensor_request_notify *cfg; - -- ret = scmi_xfer_get_init(handle, SENSOR_TRIP_POINT_NOTIFY, -+ ret = scmi_xfer_get_init(handle, message_id, - SCMI_PROTOCOL_SENSOR, sizeof(*cfg), 0, &t); - if (ret) - return ret; -@@ -573,6 +581,23 @@ static int scmi_sensor_trip_point_notify(const struct scmi_handle *handle, - return ret; - } - -+static int scmi_sensor_trip_point_notify(const struct scmi_handle *handle, -+ u32 sensor_id, bool enable) -+{ -+ return scmi_sensor_request_notify(handle, sensor_id, -+ SENSOR_TRIP_POINT_NOTIFY, -+ enable); -+} -+ -+static int -+scmi_sensor_continuous_update_notify(const struct scmi_handle *handle, -+ u32 sensor_id, bool enable) -+{ -+ return scmi_sensor_request_notify(handle, sensor_id, -+ SENSOR_CONTINUOUS_UPDATE_NOTIFY, -+ enable); -+} -+ - static int - scmi_sensor_trip_point_config(const struct scmi_handle *handle, u32 sensor_id, - u8 trip_id, u64 trip_value) -@@ -815,7 +840,19 @@ static int scmi_sensor_set_notify_enabled(const struct scmi_handle *handle, - { - int ret; - -- ret = scmi_sensor_trip_point_notify(handle, src_id, enable); -+ switch (evt_id) { -+ case SCMI_EVENT_SENSOR_TRIP_POINT_EVENT: -+ ret = scmi_sensor_trip_point_notify(handle, src_id, enable); -+ break; -+ case SCMI_EVENT_SENSOR_UPDATE: -+ ret = scmi_sensor_continuous_update_notify(handle, src_id, -+ enable); -+ break; -+ default: -+ ret = -EINVAL; -+ break; -+ } -+ - if (ret) - pr_debug("FAIL_ENABLED - evt[%X] dom[%d] - ret:%d\n", - evt_id, src_id, ret); -@@ -828,20 +865,59 @@ static void *scmi_sensor_fill_custom_report(const struct scmi_handle *handle, - const void *payld, size_t payld_sz, - void *report, u32 *src_id) - { -- const struct scmi_sensor_trip_notify_payld *p = payld; -- struct scmi_sensor_trip_point_report *r = report; -+ void *rep = NULL; - -- if (evt_id != SCMI_EVENT_SENSOR_TRIP_POINT_EVENT || -- sizeof(*p) != payld_sz) -- return NULL; -+ switch (evt_id) { -+ case SCMI_EVENT_SENSOR_TRIP_POINT_EVENT: -+ { -+ const struct scmi_sensor_trip_notify_payld *p = payld; -+ struct scmi_sensor_trip_point_report *r = report; - -- r->timestamp = timestamp; -- r->agent_id = le32_to_cpu(p->agent_id); -- r->sensor_id = le32_to_cpu(p->sensor_id); -- r->trip_point_desc = le32_to_cpu(p->trip_point_desc); -- *src_id = r->sensor_id; -+ if (sizeof(*p) != payld_sz) -+ break; - -- return r; -+ r->timestamp = timestamp; -+ r->agent_id = le32_to_cpu(p->agent_id); -+ r->sensor_id = le32_to_cpu(p->sensor_id); -+ r->trip_point_desc = le32_to_cpu(p->trip_point_desc); -+ *src_id = r->sensor_id; -+ rep = r; -+ break; -+ } -+ case SCMI_EVENT_SENSOR_UPDATE: -+ { -+ int i; -+ struct scmi_sensor_info *s; -+ const struct scmi_sensor_update_notify_payld *p = payld; -+ struct scmi_sensor_update_report *r = report; -+ struct sensors_info *sinfo = handle->sensor_priv; -+ -+ /* payld_sz is variable for this event */ -+ r->sensor_id = le32_to_cpu(p->sensor_id); -+ if (r->sensor_id >= sinfo->num_sensors) -+ break; -+ r->timestamp = timestamp; -+ r->agent_id = le32_to_cpu(p->agent_id); -+ s = &sinfo->sensors[r->sensor_id]; -+ /* -+ * The generated report r (@struct scmi_sensor_update_report) -+ * was pre-allocated to contain up to SCMI_MAX_NUM_SENSOR_AXIS -+ * readings: here it is filled with the effective @num_axis -+ * readings defined for this sensor or 1 for scalar sensors. -+ */ -+ r->readings_count = s->num_axis ?: 1; -+ for (i = 0; i < r->readings_count; i++) -+ scmi_parse_sensor_readings(&r->readings[i], -+ &p->readings[i]); -+ *src_id = r->sensor_id; -+ rep = r; -+ break; -+ } -+ default: -+ break; -+ } -+ -+ return rep; - } - - static const struct scmi_event sensor_events[] = { -@@ -850,6 +926,16 @@ static const struct scmi_event sensor_events[] = { - .max_payld_sz = sizeof(struct scmi_sensor_trip_notify_payld), - .max_report_sz = sizeof(struct scmi_sensor_trip_point_report), - }, -+ { -+ .id = SCMI_EVENT_SENSOR_UPDATE, -+ .max_payld_sz = -+ sizeof(struct scmi_sensor_update_notify_payld) + -+ SCMI_MAX_NUM_SENSOR_AXIS * -+ sizeof(struct scmi_sensor_reading_le), -+ .max_report_sz = sizeof(struct scmi_sensor_update_report) + -+ SCMI_MAX_NUM_SENSOR_AXIS * -+ sizeof(struct scmi_sensor_reading), -+ }, - }; - - static const struct scmi_event_ops sensor_event_ops = { -diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h -index 7e9e2cd3d46b..be0be5ff7514 100644 ---- a/include/linux/scmi_protocol.h -+++ b/include/linux/scmi_protocol.h -@@ -657,6 +657,7 @@ enum scmi_notification_events { - SCMI_EVENT_PERFORMANCE_LIMITS_CHANGED = 0x0, - SCMI_EVENT_PERFORMANCE_LEVEL_CHANGED = 0x1, - SCMI_EVENT_SENSOR_TRIP_POINT_EVENT = 0x0, -+ SCMI_EVENT_SENSOR_UPDATE = 0x1, - SCMI_EVENT_RESET_ISSUED = 0x0, - SCMI_EVENT_BASE_ERROR_EVENT = 0x0, - SCMI_EVENT_SYSTEM_POWER_STATE_NOTIFIER = 0x0, -@@ -698,6 +699,14 @@ struct scmi_sensor_trip_point_report { - unsigned int trip_point_desc; - }; - -+struct scmi_sensor_update_report { -+ ktime_t timestamp; -+ unsigned int agent_id; -+ unsigned int sensor_id; -+ unsigned int readings_count; -+ struct scmi_sensor_reading readings[]; -+}; -+ - struct scmi_reset_issued_report { - ktime_t timestamp; - unsigned int agent_id; diff --git a/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio-scmi/0001-firmware-arm_scmi-smccc-mailbox-Make-shmem-based-tra.patch b/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio-scmi/0001-firmware-arm_scmi-smccc-mailbox-Make-shmem-based-tra.patch deleted file mode 100644 index 3d9d0fdb..00000000 --- a/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio-scmi/0001-firmware-arm_scmi-smccc-mailbox-Make-shmem-based-tra.patch +++ /dev/null @@ -1,119 +0,0 @@ -From 36269e8f5fa1f33a793c472935affe3039c052bd Mon Sep 17 00:00:00 2001 -From: Igor Skalkin <igor.skalkin@opensynergy.com> -Date: Thu, 5 Nov 2020 22:21:07 +0100 -Subject: [PATCH] firmware: arm_scmi, smccc, mailbox: Make shmem based - transports optional - -Upon adding the virtio transport in this patch series, SCMI will also -work without shared memory based transports. Also, the mailbox transport -may not be needed if the smc transport is used. - -- Compile shmem.c only if a shmem based transport is available. - -- Remove hard dependency of SCMI on mailbox. - -Co-developed-by: Peter Hilber <peter.hilber@opensynergy.com> -Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com> -Signed-off-by: Igor Skalkin <igor.skalkin@opensynergy.com> -Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> ---- - drivers/firmware/Kconfig | 9 ++++++++- - drivers/firmware/arm_scmi/Makefile | 2 +- - drivers/firmware/arm_scmi/common.h | 2 ++ - drivers/firmware/arm_scmi/driver.c | 2 ++ - drivers/firmware/smccc/Kconfig | 1 + - drivers/mailbox/Kconfig | 1 + - 6 files changed, 15 insertions(+), 2 deletions(-) - -diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig -index 3315e3c21586..30a85d38d0c0 100644 ---- a/drivers/firmware/Kconfig -+++ b/drivers/firmware/Kconfig -@@ -9,7 +9,7 @@ menu "Firmware Drivers" - config ARM_SCMI_PROTOCOL - tristate "ARM System Control and Management Interface (SCMI) Message Protocol" - depends on ARM || ARM64 || COMPILE_TEST -- depends on MAILBOX -+ depends on ARM_SCMI_HAVE_SHMEM - help - ARM System Control and Management Interface (SCMI) protocol is a - set of operating system-independent software interfaces that are -@@ -27,6 +27,13 @@ config ARM_SCMI_PROTOCOL - This protocol library provides interface for all the client drivers - making use of the features offered by the SCMI. - -+config ARM_SCMI_HAVE_SHMEM -+ bool -+ default n -+ help -+ This declares whether a shared memory based transport for SCMI is -+ available. -+ - config ARM_SCMI_POWER_DOMAIN - tristate "SCMI power domain driver" - depends on ARM_SCMI_PROTOCOL || (COMPILE_TEST && OF) -diff --git a/drivers/firmware/arm_scmi/Makefile b/drivers/firmware/arm_scmi/Makefile -index bc0d54f8e861..3cc7fa40a464 100644 ---- a/drivers/firmware/arm_scmi/Makefile -+++ b/drivers/firmware/arm_scmi/Makefile -@@ -1,7 +1,7 @@ - # SPDX-License-Identifier: GPL-2.0-only - scmi-bus-y = bus.o - scmi-driver-y = driver.o notify.o --scmi-transport-y = shmem.o -+scmi-transport-$(CONFIG_ARM_SCMI_HAVE_SHMEM) = shmem.o - scmi-transport-$(CONFIG_MAILBOX) += mailbox.o - scmi-transport-$(CONFIG_HAVE_ARM_SMCCC_DISCOVERY) += smc.o - scmi-protocols-y = base.o clock.o perf.o power.o reset.o sensors.o system.o -diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h -index 65063fa948d4..aed192238177 100644 ---- a/drivers/firmware/arm_scmi/common.h -+++ b/drivers/firmware/arm_scmi/common.h -@@ -242,7 +242,9 @@ struct scmi_desc { - int max_msg_size; - }; - -+#ifdef CONFIG_MAILBOX - extern const struct scmi_desc scmi_mailbox_desc; -+#endif - #ifdef CONFIG_HAVE_ARM_SMCCC - extern const struct scmi_desc scmi_smc_desc; - #endif -diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c -index 6b2ce3f28f7b..7efbf66f117b 100644 ---- a/drivers/firmware/arm_scmi/driver.c -+++ b/drivers/firmware/arm_scmi/driver.c -@@ -918,7 +918,9 @@ ATTRIBUTE_GROUPS(versions); - - /* Each compatible listed below must have descriptor associated with it */ - static const struct of_device_id scmi_of_match[] = { -+#ifdef CONFIG_MAILBOX - { .compatible = "arm,scmi", .data = &scmi_mailbox_desc }, -+#endif - #ifdef CONFIG_HAVE_ARM_SMCCC_DISCOVERY - { .compatible = "arm,scmi-smc", .data = &scmi_smc_desc}, - #endif -diff --git a/drivers/firmware/smccc/Kconfig b/drivers/firmware/smccc/Kconfig -index 15e7466179a6..69c4d6cabf62 100644 ---- a/drivers/firmware/smccc/Kconfig -+++ b/drivers/firmware/smccc/Kconfig -@@ -9,6 +9,7 @@ config HAVE_ARM_SMCCC_DISCOVERY - bool - depends on ARM_PSCI_FW - default y -+ select ARM_SCMI_HAVE_SHMEM - help - SMCCC v1.0 lacked discoverability and hence PSCI v1.0 was updated - to add SMCCC discovery mechanism though the PSCI firmware -diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig -index 05b1009e2820..5ffe1ab0c869 100644 ---- a/drivers/mailbox/Kconfig -+++ b/drivers/mailbox/Kconfig -@@ -1,6 +1,7 @@ - # SPDX-License-Identifier: GPL-2.0-only - menuconfig MAILBOX - bool "Mailbox Hardware Support" -+ select ARM_SCMI_HAVE_SHMEM - help - Mailbox is a framework to control hardware communication between - on-chip processors through queued messages and interrupt driven diff --git a/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio-scmi/0002-firmware-arm_scmi-Document-that-max_msg-is-a-per-cha.patch b/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio-scmi/0002-firmware-arm_scmi-Document-that-max_msg-is-a-per-cha.patch deleted file mode 100644 index 7a21fedf..00000000 --- a/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio-scmi/0002-firmware-arm_scmi-Document-that-max_msg-is-a-per-cha.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 30de0a5e1fec42589469e5ec8951d15d364df63a Mon Sep 17 00:00:00 2001 -From: Igor Skalkin <igor.skalkin@opensynergy.com> -Date: Thu, 5 Nov 2020 22:21:08 +0100 -Subject: [PATCH] firmware: arm_scmi: Document that max_msg is a per channel - type limit - -struct scmi_desc.max_msg specifies a limit for the pending messages. -This limit is a per SCMI channel type (tx, rx) limit. State that -explicitly in the inline documentation. The following patch will add an -op to override the limit per channel type. - -Co-developed-by: Peter Hilber <peter.hilber@opensynergy.com> -Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com> -Signed-off-by: Igor Skalkin <igor.skalkin@opensynergy.com> -Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> ---- - drivers/firmware/arm_scmi/common.h | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h -index aed192238177..38e6aabbe3dd 100644 ---- a/drivers/firmware/arm_scmi/common.h -+++ b/drivers/firmware/arm_scmi/common.h -@@ -231,8 +231,8 @@ struct scmi_transport_ops { - * - * @ops: Pointer to the transport specific ops structure - * @max_rx_timeout_ms: Timeout for communication with SoC (in Milliseconds) -- * @max_msg: Maximum number of messages that can be pending -- * simultaneously in the system -+ * @max_msg: Maximum number of messages for a channel type (tx or rx) that can -+ * be pending simultaneously in the system - * @max_msg_size: Maximum size of data per message that can be handled. - */ - struct scmi_desc { diff --git a/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio-scmi/0003-firmware-arm_scmi-Add-op-to-override-max-message.patch b/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio-scmi/0003-firmware-arm_scmi-Add-op-to-override-max-message.patch deleted file mode 100644 index f58d6d88..00000000 --- a/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio-scmi/0003-firmware-arm_scmi-Add-op-to-override-max-message.patch +++ /dev/null @@ -1,165 +0,0 @@ -From 9ffe778acc541cec68c954f84c6fcfef8a35bec2 Mon Sep 17 00:00:00 2001 -From: Igor Skalkin <igor.skalkin@opensynergy.com> -Date: Thu, 5 Nov 2020 22:21:09 +0100 -Subject: [PATCH] firmware: arm_scmi: Add op to override max message # - -The number of messages that the upcoming scmi-virtio transport can -support depends on the virtio device (SCMI platform) and can differ for -each channel. (The scmi-virtio transport does only have one tx and at -most 1 rx channel.) - -Add an optional transport op so that scmi-virtio can report the actual -max message # for each channel type. Respect these new limits. - -Co-developed-by: Peter Hilber <peter.hilber@opensynergy.com> -Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com> -Signed-off-by: Igor Skalkin <igor.skalkin@opensynergy.com> -Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> ---- - drivers/firmware/arm_scmi/common.h | 8 ++++- - drivers/firmware/arm_scmi/driver.c | 49 ++++++++++++++++++++++-------- - 2 files changed, 43 insertions(+), 14 deletions(-) - -diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h -index 38e6aabbe3dd..9a8359ecd220 100644 ---- a/drivers/firmware/arm_scmi/common.h -+++ b/drivers/firmware/arm_scmi/common.h -@@ -203,6 +203,9 @@ struct scmi_chan_info { - * @chan_available: Callback to check if channel is available or not - * @chan_setup: Callback to allocate and setup a channel - * @chan_free: Callback to free a channel -+ * @get_max_msg: Optional callback to provide max_msg dynamically -+ * @max_msg: Maximum number of messages for the channel type (tx or rx) -+ * that can be pending simultaneously in the system - * @send_message: Callback to send a message - * @mark_txdone: Callback to mark tx as done - * @fetch_response: Callback to fetch response -@@ -215,6 +218,8 @@ struct scmi_transport_ops { - int (*chan_setup)(struct scmi_chan_info *cinfo, struct device *dev, - bool tx); - int (*chan_free)(int id, void *p, void *data); -+ int (*get_max_msg)(bool tx, struct scmi_chan_info *base_cinfo, -+ int *max_msg); - int (*send_message)(struct scmi_chan_info *cinfo, - struct scmi_xfer *xfer); - void (*mark_txdone)(struct scmi_chan_info *cinfo, int ret); -@@ -232,7 +237,8 @@ struct scmi_transport_ops { - * @ops: Pointer to the transport specific ops structure - * @max_rx_timeout_ms: Timeout for communication with SoC (in Milliseconds) - * @max_msg: Maximum number of messages for a channel type (tx or rx) that can -- * be pending simultaneously in the system -+ * be pending simultaneously in the system. May be overridden by the -+ * get_max_msg op. - * @max_msg_size: Maximum size of data per message that can be handled. - */ - struct scmi_desc { -diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c -index 7efbf66f117b..5baa23789a49 100644 ---- a/drivers/firmware/arm_scmi/driver.c -+++ b/drivers/firmware/arm_scmi/driver.c -@@ -61,11 +61,13 @@ static atomic_t transfer_last_id; - * Index of this bitmap table is also used for message - * sequence identifier. - * @xfer_lock: Protection for message allocation -+ * @max_msg: Maximum number of messages that can be pending - */ - struct scmi_xfers_info { - struct scmi_xfer *xfer_block; - unsigned long *xfer_alloc_table; - spinlock_t xfer_lock; -+ int max_msg; - }; - - /** -@@ -157,13 +159,11 @@ static struct scmi_xfer *scmi_xfer_get(const struct scmi_handle *handle, - u16 xfer_id; - struct scmi_xfer *xfer; - unsigned long flags, bit_pos; -- struct scmi_info *info = handle_to_scmi_info(handle); - - /* Keep the locked section as small as possible */ - spin_lock_irqsave(&minfo->xfer_lock, flags); -- bit_pos = find_first_zero_bit(minfo->xfer_alloc_table, -- info->desc->max_msg); -- if (bit_pos == info->desc->max_msg) { -+ bit_pos = find_first_zero_bit(minfo->xfer_alloc_table, minfo->max_msg); -+ if (bit_pos == minfo->max_msg) { - spin_unlock_irqrestore(&minfo->xfer_lock, flags); - return ERR_PTR(-ENOMEM); - } -@@ -602,32 +602,44 @@ int scmi_handle_put(const struct scmi_handle *handle) - } - - static int __scmi_xfer_info_init(struct scmi_info *sinfo, -- struct scmi_xfers_info *info) -+ struct scmi_xfers_info *info, -+ bool tx, -+ struct scmi_chan_info *base_cinfo) - { - int i; - struct scmi_xfer *xfer; - struct device *dev = sinfo->dev; - const struct scmi_desc *desc = sinfo->desc; - -+ info->max_msg = desc->max_msg; -+ -+ if (desc->ops->get_max_msg) { -+ int ret = -+ desc->ops->get_max_msg(tx, base_cinfo, &info->max_msg); -+ -+ if (ret) -+ return ret; -+ } -+ - /* Pre-allocated messages, no more than what hdr.seq can support */ -- if (WARN_ON(desc->max_msg >= MSG_TOKEN_MAX)) { -+ if (WARN_ON(info->max_msg >= MSG_TOKEN_MAX)) { - dev_err(dev, "Maximum message of %d exceeds supported %ld\n", -- desc->max_msg, MSG_TOKEN_MAX); -+ info->max_msg, MSG_TOKEN_MAX); - return -EINVAL; - } - -- info->xfer_block = devm_kcalloc(dev, desc->max_msg, -+ info->xfer_block = devm_kcalloc(dev, info->max_msg, - sizeof(*info->xfer_block), GFP_KERNEL); - if (!info->xfer_block) - return -ENOMEM; - -- info->xfer_alloc_table = devm_kcalloc(dev, BITS_TO_LONGS(desc->max_msg), -+ info->xfer_alloc_table = devm_kcalloc(dev, BITS_TO_LONGS(info->max_msg), - sizeof(long), GFP_KERNEL); - if (!info->xfer_alloc_table) - return -ENOMEM; - - /* Pre-initialize the buffer pointer to pre-allocated buffers */ -- for (i = 0, xfer = info->xfer_block; i < desc->max_msg; i++, xfer++) { -+ for (i = 0, xfer = info->xfer_block; i < info->max_msg; i++, xfer++) { - xfer->rx.buf = devm_kcalloc(dev, sizeof(u8), desc->max_msg_size, - GFP_KERNEL); - if (!xfer->rx.buf) -@@ -644,10 +656,21 @@ static int __scmi_xfer_info_init(struct scmi_info *sinfo, - - static int scmi_xfer_info_init(struct scmi_info *sinfo) - { -- int ret = __scmi_xfer_info_init(sinfo, &sinfo->tx_minfo); -+ int ret; -+ struct scmi_chan_info *base_tx_cinfo; -+ struct scmi_chan_info *base_rx_cinfo; -+ -+ base_tx_cinfo = idr_find(&sinfo->tx_idr, SCMI_PROTOCOL_BASE); -+ if (unlikely(!base_tx_cinfo)) -+ return -EINVAL; -+ -+ ret = __scmi_xfer_info_init(sinfo, &sinfo->tx_minfo, true, -+ base_tx_cinfo); - -- if (!ret && idr_find(&sinfo->rx_idr, SCMI_PROTOCOL_BASE)) -- ret = __scmi_xfer_info_init(sinfo, &sinfo->rx_minfo); -+ base_rx_cinfo = idr_find(&sinfo->rx_idr, SCMI_PROTOCOL_BASE); -+ if (!ret && base_rx_cinfo) -+ ret = __scmi_xfer_info_init(sinfo, &sinfo->rx_minfo, false, -+ base_rx_cinfo); - - return ret; - } diff --git a/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio-scmi/0004-firmware-arm_scmi-Add-per-message-transport-data.patch b/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio-scmi/0004-firmware-arm_scmi-Add-per-message-transport-data.patch deleted file mode 100644 index 644b015d..00000000 --- a/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio-scmi/0004-firmware-arm_scmi-Add-per-message-transport-data.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 0771d1d96e6439c00497a521f8d2c9803f7e07e2 Mon Sep 17 00:00:00 2001 -From: Igor Skalkin <igor.skalkin@opensynergy.com> -Date: Thu, 5 Nov 2020 22:21:10 +0100 -Subject: [PATCH] firmware: arm_scmi: Add per message transport data - -The virtio transport in this patch series can be simplified by using the -scmi_xfer tx/rx buffers for data exchange with the virtio device, and -for saving the message state. But the virtio transport requires -prepending a transport-specific header. Also, for data exchange using -virtqueues, the tx and rx buffers should not overlap. - -The first step to solve the aforementioned issues is to add a -transport-specific data pointer to scmi_xfer. - -Co-developed-by: Peter Hilber <peter.hilber@opensynergy.com> -Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com> -Signed-off-by: Igor Skalkin <igor.skalkin@opensynergy.com> -Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> ---- - drivers/firmware/arm_scmi/common.h | 2 ++ - 1 file changed, 2 insertions(+) - -diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h -index 9a8359ecd220..c998ec29018e 100644 ---- a/drivers/firmware/arm_scmi/common.h -+++ b/drivers/firmware/arm_scmi/common.h -@@ -131,6 +131,7 @@ struct scmi_msg { - * buffer for the rx path as we use for the tx path. - * @done: command message transmit completion event - * @async_done: pointer to delayed response message received event completion -+ * @extra_data: Transport-specific private data pointer - */ - struct scmi_xfer { - int transfer_id; -@@ -139,6 +140,7 @@ struct scmi_xfer { - struct scmi_msg rx; - struct completion done; - struct completion *async_done; -+ void *extra_data; - }; - - void scmi_xfer_put(const struct scmi_handle *h, struct scmi_xfer *xfer); diff --git a/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio-scmi/0005-firmware-arm_scmi-Add-xfer_init_buffers-transport-op.patch b/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio-scmi/0005-firmware-arm_scmi-Add-xfer_init_buffers-transport-op.patch deleted file mode 100644 index e62e5c50..00000000 --- a/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio-scmi/0005-firmware-arm_scmi-Add-xfer_init_buffers-transport-op.patch +++ /dev/null @@ -1,79 +0,0 @@ -From fddb9bcd706ed3bb262f4f37707616dd06c7a4cc Mon Sep 17 00:00:00 2001 -From: Igor Skalkin <igor.skalkin@opensynergy.com> -Date: Thu, 5 Nov 2020 22:21:11 +0100 -Subject: [PATCH] firmware: arm_scmi: Add xfer_init_buffers transport op - -The virtio transport in this patch series can be simplified by using the -scmi_xfer tx/rx buffers for data exchange with the virtio device, and -for saving the message state. But the virtio transport requires -prepending a transport-specific header. Also, for data exchange using -virtqueues, the tx and rx buffers should not overlap. - -After the previous patch, this is the second and final step to enable -the virtio transport to use the scmi_xfer buffers for data exchange. - -Add an optional op through which the transport can allocate the tx/rx -buffers along with room for the prepended transport-specific headers. - -Co-developed-by: Peter Hilber <peter.hilber@opensynergy.com> -Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com> -Signed-off-by: Igor Skalkin <igor.skalkin@opensynergy.com> -Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> ---- - drivers/firmware/arm_scmi/common.h | 3 +++ - drivers/firmware/arm_scmi/driver.c | 21 +++++++++++++++------ - 2 files changed, 18 insertions(+), 6 deletions(-) - -diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h -index c998ec29018e..ae5db602e45d 100644 ---- a/drivers/firmware/arm_scmi/common.h -+++ b/drivers/firmware/arm_scmi/common.h -@@ -208,6 +208,7 @@ struct scmi_chan_info { - * @get_max_msg: Optional callback to provide max_msg dynamically - * @max_msg: Maximum number of messages for the channel type (tx or rx) - * that can be pending simultaneously in the system -+ * @xfer_init_buffers: Callback to initialize buffers for scmi_xfer - * @send_message: Callback to send a message - * @mark_txdone: Callback to mark tx as done - * @fetch_response: Callback to fetch response -@@ -222,6 +223,8 @@ struct scmi_transport_ops { - int (*chan_free)(int id, void *p, void *data); - int (*get_max_msg)(bool tx, struct scmi_chan_info *base_cinfo, - int *max_msg); -+ int (*xfer_init_buffers)(struct scmi_chan_info *cinfo, -+ struct scmi_xfer *xfer, int max_msg_size); - int (*send_message)(struct scmi_chan_info *cinfo, - struct scmi_xfer *xfer); - void (*mark_txdone)(struct scmi_chan_info *cinfo, int ret); -diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c -index 5baa23789a49..27dd43dcff5b 100644 ---- a/drivers/firmware/arm_scmi/driver.c -+++ b/drivers/firmware/arm_scmi/driver.c -@@ -640,12 +640,21 @@ static int __scmi_xfer_info_init(struct scmi_info *sinfo, - - /* Pre-initialize the buffer pointer to pre-allocated buffers */ - for (i = 0, xfer = info->xfer_block; i < info->max_msg; i++, xfer++) { -- xfer->rx.buf = devm_kcalloc(dev, sizeof(u8), desc->max_msg_size, -- GFP_KERNEL); -- if (!xfer->rx.buf) -- return -ENOMEM; -- -- xfer->tx.buf = xfer->rx.buf; -+ if (desc->ops->xfer_init_buffers) { -+ int ret = desc->ops->xfer_init_buffers( -+ base_cinfo, xfer, desc->max_msg_size); -+ -+ if (ret) -+ return ret; -+ } else { -+ xfer->rx.buf = devm_kcalloc(dev, sizeof(u8), -+ desc->max_msg_size, -+ GFP_KERNEL); -+ if (!xfer->rx.buf) -+ return -ENOMEM; -+ -+ xfer->tx.buf = xfer->rx.buf; -+ } - init_completion(&xfer->done); - } - diff --git a/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio-scmi/0006-firmware-arm_scmi-Add-optional-link_supplier-transpo.patch b/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio-scmi/0006-firmware-arm_scmi-Add-optional-link_supplier-transpo.patch deleted file mode 100644 index 0f5180fa..00000000 --- a/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio-scmi/0006-firmware-arm_scmi-Add-optional-link_supplier-transpo.patch +++ /dev/null @@ -1,54 +0,0 @@ -From f0d7ff1f10ab846bf32bae3b7d32bf95653954fa Mon Sep 17 00:00:00 2001 -From: Peter Hilber <peter.hilber@opensynergy.com> -Date: Thu, 5 Nov 2020 22:21:12 +0100 -Subject: [PATCH] firmware: arm_scmi: Add optional link_supplier() transport op - -For the scmi-virtio transport, it might not be possible to refer to the -proper virtio device at device tree build time. Therefore, add an op -which will allow scmi-virtio to dynamically link to the proper virtio -device during probe. - -Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com> -Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> ---- - drivers/firmware/arm_scmi/common.h | 2 ++ - drivers/firmware/arm_scmi/driver.c | 6 ++++++ - 2 files changed, 8 insertions(+) - -diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h -index ae5db602e45d..2f55ac71555a 100644 ---- a/drivers/firmware/arm_scmi/common.h -+++ b/drivers/firmware/arm_scmi/common.h -@@ -202,6 +202,7 @@ struct scmi_chan_info { - /** - * struct scmi_transport_ops - Structure representing a SCMI transport ops - * -+ * @link_supplier: Optional callback to add link to a supplier device - * @chan_available: Callback to check if channel is available or not - * @chan_setup: Callback to allocate and setup a channel - * @chan_free: Callback to free a channel -@@ -217,6 +218,7 @@ struct scmi_chan_info { - * @poll_done: Callback to poll transfer status - */ - struct scmi_transport_ops { -+ int (*link_supplier)(struct device *dev); - bool (*chan_available)(struct device *dev, int idx); - int (*chan_setup)(struct scmi_chan_info *cinfo, struct device *dev, - bool tx); -diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c -index 27dd43dcff5b..0b70f9ef9477 100644 ---- a/drivers/firmware/arm_scmi/driver.c -+++ b/drivers/firmware/arm_scmi/driver.c -@@ -826,6 +826,12 @@ static int scmi_probe(struct platform_device *pdev) - handle->dev = info->dev; - handle->version = &info->version; - -+ if (desc->ops->link_supplier) { -+ ret = desc->ops->link_supplier(dev); -+ if (ret) -+ return ret; -+ } -+ - ret = scmi_txrx_setup(info, dev, SCMI_PROTOCOL_BASE); - if (ret) - return ret; diff --git a/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio-scmi/0007-firmware-arm_scmi-Add-per-device-transport-private-i.patch b/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio-scmi/0007-firmware-arm_scmi-Add-per-device-transport-private-i.patch deleted file mode 100644 index 1c82530f..00000000 --- a/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio-scmi/0007-firmware-arm_scmi-Add-per-device-transport-private-i.patch +++ /dev/null @@ -1,92 +0,0 @@ -From 9d5366d4765fb60cafa31c2b46cd80d284c847bb Mon Sep 17 00:00:00 2001 -From: Peter Hilber <peter.hilber@opensynergy.com> -Date: Thu, 5 Nov 2020 22:21:13 +0100 -Subject: [PATCH] firmware: arm_scmi: Add per-device transport private info - -The scmi-virtio transport will link a supplier device to the arm-scmi -device in the link_supplier() op. The transport should then save a -pointer to the linked device. - -To enable this, add a transport private info to the scmi_info. (The -scmi_info is already reachable through the arm-scmi device driver_data.) - -Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com> -Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> ---- - drivers/firmware/arm_scmi/common.h | 2 ++ - drivers/firmware/arm_scmi/driver.c | 35 ++++++++++++++++++++++++++++++ - 2 files changed, 37 insertions(+) - -diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h -index 2f55ac71555a..ec9fd7fce3c7 100644 ---- a/drivers/firmware/arm_scmi/common.h -+++ b/drivers/firmware/arm_scmi/common.h -@@ -262,6 +262,8 @@ extern const struct scmi_desc scmi_mailbox_desc; - extern const struct scmi_desc scmi_smc_desc; - #endif - -+int scmi_set_transport_info(struct device *dev, void *transport_info); -+void *scmi_get_transport_info(struct device *dev); - void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr); - void scmi_free_channel(struct scmi_chan_info *cinfo, struct idr *idr, int id); - -diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c -index 0b70f9ef9477..93ce17bb4079 100644 ---- a/drivers/firmware/arm_scmi/driver.c -+++ b/drivers/firmware/arm_scmi/driver.c -@@ -84,6 +84,7 @@ struct scmi_xfers_info { - * @rx_idr: IDR object to map protocol id to Rx channel info pointer - * @protocols_imp: List of protocols implemented, currently maximum of - * MAX_PROTOCOLS_IMP elements allocated by the base protocol -+ * @transport_info: Transport private info - * @node: List head - * @users: Number of users of this instance - */ -@@ -97,6 +98,7 @@ struct scmi_info { - struct idr tx_idr; - struct idr rx_idr; - u8 *protocols_imp; -+ void *transport_info; - struct list_head node; - int users; - }; -@@ -315,6 +317,39 @@ void scmi_rx_callback(struct scmi_chan_info *cinfo, u32 msg_hdr) - } - } - -+/** -+ * scmi_set_transport_info() - Set transport private info -+ * -+ * @dev: SCMI instance device -+ * @transport_info: transport private info -+ * -+ * Return: 0 on success, otherwise error. -+ */ -+int scmi_set_transport_info(struct device *dev, void *transport_info) -+{ -+ struct scmi_info *info = dev_get_drvdata(dev); -+ -+ if (!info) -+ return -EBADR; -+ -+ info->transport_info = transport_info; -+ return 0; -+} -+ -+/** -+ * scmi_get_transport_info() - Get transport private info -+ * -+ * @dev: SCMI instance device -+ * -+ * Return: transport private info on success, otherwise NULL. -+ */ -+void *scmi_get_transport_info(struct device *dev) -+{ -+ struct scmi_info *info = dev_get_drvdata(dev); -+ -+ return info ? info->transport_info : NULL; -+} -+ - /** - * scmi_xfer_put() - Release a transmit message - * diff --git a/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio-scmi/0008-firmware-arm_scmi-Add-is_scmi_protocol_device.patch b/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio-scmi/0008-firmware-arm_scmi-Add-is_scmi_protocol_device.patch deleted file mode 100644 index 92aad65e..00000000 --- a/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio-scmi/0008-firmware-arm_scmi-Add-is_scmi_protocol_device.patch +++ /dev/null @@ -1,46 +0,0 @@ -From c4b299105e74f7863b2aa63bd838e7762761629c Mon Sep 17 00:00:00 2001 -From: Peter Hilber <peter.hilber@opensynergy.com> -Date: Thu, 5 Nov 2020 22:21:14 +0100 -Subject: [PATCH] firmware: arm_scmi: Add is_scmi_protocol_device() - -The scmi-virtio transport driver will need to distinguish SCMI protocol -devices from the SCMI instance device in the chan_setup() and -chan_free() ops. Add this internal helper to be able to distinguish the -two. - -Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com> -Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> ---- - drivers/firmware/arm_scmi/bus.c | 5 +++++ - drivers/firmware/arm_scmi/common.h | 2 ++ - 2 files changed, 7 insertions(+) - -diff --git a/drivers/firmware/arm_scmi/bus.c b/drivers/firmware/arm_scmi/bus.c -index 1377ec76a45d..4f19faafb2c5 100644 ---- a/drivers/firmware/arm_scmi/bus.c -+++ b/drivers/firmware/arm_scmi/bus.c -@@ -108,6 +108,11 @@ static struct bus_type scmi_bus_type = { - .remove = scmi_dev_remove, - }; - -+bool is_scmi_protocol_device(struct device *dev) -+{ -+ return dev->bus == &scmi_bus_type; -+} -+ - int scmi_driver_register(struct scmi_driver *driver, struct module *owner, - const char *mod_name) - { -diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h -index ec9fd7fce3c7..13c9ac176b23 100644 ---- a/drivers/firmware/arm_scmi/common.h -+++ b/drivers/firmware/arm_scmi/common.h -@@ -158,6 +158,8 @@ int scmi_version_get(const struct scmi_handle *h, u8 protocol, u32 *version); - void scmi_setup_protocol_implemented(const struct scmi_handle *handle, - u8 *prot_imp); - -+bool is_scmi_protocol_device(struct device *dev); -+ - int scmi_base_protocol_init(struct scmi_handle *h); - - int __init scmi_bus_init(void); diff --git a/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio-scmi/0009-dt-bindings-arm-Add-virtio-transport-for-SCMI.patch b/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio-scmi/0009-dt-bindings-arm-Add-virtio-transport-for-SCMI.patch deleted file mode 100644 index beb2d99f..00000000 --- a/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio-scmi/0009-dt-bindings-arm-Add-virtio-transport-for-SCMI.patch +++ /dev/null @@ -1,89 +0,0 @@ -From 592064dd36739ad5f3d885b9880ee1bc2d66e2df Mon Sep 17 00:00:00 2001 -From: Igor Skalkin <igor.skalkin@opensynergy.com> -Date: Thu, 5 Nov 2020 22:21:15 +0100 -Subject: [PATCH] dt-bindings: arm: Add virtio transport for SCMI - -Document the properties for arm,scmi-virtio compatible nodes. The -backing virtio SCMI device is described in patch [1]. - -[1] https://lists.oasis-open.org/archives/virtio-comment/202005/msg00096.html - -Co-developed-by: Peter Hilber <peter.hilber@opensynergy.com> -Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com> -Signed-off-by: Igor Skalkin <igor.skalkin@opensynergy.com> -Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> ---- - .../devicetree/bindings/arm/arm,scmi.txt | 35 +++++++++++++++++-- - 1 file changed, 33 insertions(+), 2 deletions(-) - -diff --git a/Documentation/devicetree/bindings/arm/arm,scmi.txt b/Documentation/devicetree/bindings/arm/arm,scmi.txt -index 55deb68230eb..6ded49d82773 100644 ---- a/Documentation/devicetree/bindings/arm/arm,scmi.txt -+++ b/Documentation/devicetree/bindings/arm/arm,scmi.txt -@@ -13,6 +13,9 @@ the device tree. - Required properties: - - The scmi node with the following properties shall be under the /firmware/ node. -+Some properties are specific to a transport type. -+ -+shmem-based transports (mailbox, smc/hvc): - - - compatible : shall be "arm,scmi" or "arm,scmi-smc" for smc/hvc transports - - mboxes: List of phandle and mailbox channel specifiers. It should contain -@@ -21,6 +24,15 @@ The scmi node with the following properties shall be under the /firmware/ node. - supported. - - shmem : List of phandle pointing to the shared memory(SHM) area as per - generic mailbox client binding. -+ -+Virtio transport: -+ -+- compatible : shall be "arm,scmi-virtio". -+ -+The virtio transport only supports a single device. -+ -+Additional required properties: -+ - - #address-cells : should be '1' if the device has sub-nodes, maps to - protocol identifier for a given sub-node. - - #size-cells : should be '0' as 'reg' property doesn't have any size -@@ -42,7 +54,8 @@ Each protocol supported shall have a sub-node with corresponding compatible - as described in the following sections. If the platform supports dedicated - communication channel for a particular protocol, the 3 properties namely: - mboxes, mbox-names and shmem shall be present in the sub-node corresponding --to that protocol. -+to that protocol. The virtio transport does not support dedicated communication -+channels. - - Clock/Performance bindings for the clocks/OPPs based on SCMI Message Protocol - ------------------------------------------------------------ -@@ -106,7 +119,8 @@ Required sub-node properties: - [4] Documentation/devicetree/bindings/sram/sram.yaml - [5] Documentation/devicetree/bindings/reset/reset.txt - --Example: -+Example (mailbox transport): -+---------------------------- - - sram@50000000 { - compatible = "mmio-sram"; -@@ -195,3 +209,20 @@ thermal-zones { - ... - }; - }; -+ -+Example (virtio transport): -+--------------------------- -+ -+virtio_mmio@4b001000 { -+ compatible = "virtio,mmio"; -+ ... -+}; -+ -+firmware { -+ ... -+ scmi { -+ compatible = "arm,scmi-virtio"; -+ ... -+ -+The rest is similar to the mailbox transport example, when omitting the -+mailbox/shmem-specific properties. diff --git a/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio-scmi/0010-firmware-arm_scmi-Add-virtio-transport.patch b/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio-scmi/0010-firmware-arm_scmi-Add-virtio-transport.patch deleted file mode 100644 index 35ea04f8..00000000 --- a/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio-scmi/0010-firmware-arm_scmi-Add-virtio-transport.patch +++ /dev/null @@ -1,756 +0,0 @@ -From 7b9f3fe0766d6d36ca7465e54754df51ca175079 Mon Sep 17 00:00:00 2001 -From: Igor Skalkin <igor.skalkin@opensynergy.com> -Date: Thu, 5 Nov 2020 22:21:16 +0100 -Subject: [PATCH] firmware: arm_scmi: Add virtio transport - -This transport enables accessing an SCMI platform as a virtio device. - -Implement an SCMI virtio driver according to the virtio SCMI device spec -patch v5 [1]. Virtio device id 32 has been reserved for the SCMI device -[2]. - -The virtio transport has one tx channel (virtio cmdq, A2P channel) and -at most one rx channel (virtio eventq, P2A channel). - -The following feature bit defined in [1] is not implemented: -VIRTIO_SCMI_F_SHARED_MEMORY. - -After the preparatory patches, implement the virtio transport as -paraphrased: - -Only support a single arm-scmi device (which is consistent with the SCMI -spec). Call scmi-virtio init from arm-scmi module init. During the -arm-scmi probing, link to the first probed scmi-virtio device. Defer -arm-scmi probing if no scmi-virtio device is bound yet. - -Use the scmi_xfer tx/rx buffers for data exchange with the virtio device -in order to avoid redundant maintenance of additional buffers. Allocate -the buffers in the SCMI transport, and prepend room for a small header -used by the virtio transport to the tx/rx buffers. - -For simplicity, restrict the number of messages which can be pending -simultaneously according to the virtqueue capacity. (The virtqueue sizes -are negotiated with the virtio device.) - -As soon as rx channel message buffers are allocated or have been read -out by the arm-scmi driver, feed them to the virtio device. - -Since some virtio devices may not have the short response time exhibited -by SCMI platforms using other transports, set a generous response -timeout. - -Limitations: - -Do not adjust the other SCMI timeouts for delayed response and polling -for now, since these timeouts are only relevant in special cases which -are not yet deemed relevant for this transport. - -To do (as discussed in the cover letter): - -- Avoid re-use of buffers still being used by the virtio device on - timeouts. - -- Avoid race conditions on receiving messages during/after channel free - on driver probe failure or remove. - -[1] https://lists.oasis-open.org/archives/virtio-comment/202005/msg00096.html -[2] https://www.oasis-open.org/committees/ballot.php?id=3496 - -Co-developed-by: Peter Hilber <peter.hilber@opensynergy.com> -Signed-off-by: Peter Hilber <peter.hilber@opensynergy.com> -Signed-off-by: Igor Skalkin <igor.skalkin@opensynergy.com> -Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> ---- - MAINTAINERS | 1 + - drivers/firmware/Kconfig | 12 +- - drivers/firmware/arm_scmi/Makefile | 1 + - drivers/firmware/arm_scmi/common.h | 14 + - drivers/firmware/arm_scmi/driver.c | 11 + - drivers/firmware/arm_scmi/virtio.c | 493 +++++++++++++++++++++++++++++ - include/uapi/linux/virtio_ids.h | 1 + - include/uapi/linux/virtio_scmi.h | 41 +++ - 8 files changed, 573 insertions(+), 1 deletion(-) - create mode 100644 drivers/firmware/arm_scmi/virtio.c - create mode 100644 include/uapi/linux/virtio_scmi.h - -diff --git a/MAINTAINERS b/MAINTAINERS -index 49772b741967..d223a5c3f465 100644 ---- a/MAINTAINERS -+++ b/MAINTAINERS -@@ -16973,6 +16973,7 @@ F: drivers/firmware/arm_scpi.c - F: drivers/reset/reset-scmi.c - F: include/linux/sc[mp]i_protocol.h - F: include/trace/events/scmi.h -+F: include/uapi/linux/virtio_scmi.h - - SYSTEM RESET/SHUTDOWN DRIVERS - M: Sebastian Reichel <sre@kernel.org> -diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig -index 30a85d38d0c0..82e97904bcae 100644 ---- a/drivers/firmware/Kconfig -+++ b/drivers/firmware/Kconfig -@@ -9,7 +9,7 @@ menu "Firmware Drivers" - config ARM_SCMI_PROTOCOL - tristate "ARM System Control and Management Interface (SCMI) Message Protocol" - depends on ARM || ARM64 || COMPILE_TEST -- depends on ARM_SCMI_HAVE_SHMEM -+ depends on ARM_SCMI_HAVE_SHMEM || VIRTIO_SCMI - help - ARM System Control and Management Interface (SCMI) protocol is a - set of operating system-independent software interfaces that are -@@ -34,6 +34,16 @@ config ARM_SCMI_HAVE_SHMEM - This declares whether a shared memory based transport for SCMI is - available. - -+config VIRTIO_SCMI -+ bool "Virtio transport for SCMI" -+ default n -+ depends on VIRTIO -+ help -+ This enables the virtio based transport for SCMI. -+ -+ If you want to use the ARM SCMI protocol between the virtio guest and -+ a host providing a virtio SCMI device, answer Y. -+ - config ARM_SCMI_POWER_DOMAIN - tristate "SCMI power domain driver" - depends on ARM_SCMI_PROTOCOL || (COMPILE_TEST && OF) -diff --git a/drivers/firmware/arm_scmi/Makefile b/drivers/firmware/arm_scmi/Makefile -index 3cc7fa40a464..25caea5e1969 100644 ---- a/drivers/firmware/arm_scmi/Makefile -+++ b/drivers/firmware/arm_scmi/Makefile -@@ -4,6 +4,7 @@ scmi-driver-y = driver.o notify.o - scmi-transport-$(CONFIG_ARM_SCMI_HAVE_SHMEM) = shmem.o - scmi-transport-$(CONFIG_MAILBOX) += mailbox.o - scmi-transport-$(CONFIG_HAVE_ARM_SMCCC_DISCOVERY) += smc.o -+scmi-transport-$(CONFIG_VIRTIO_SCMI) += virtio.o - scmi-protocols-y = base.o clock.o perf.o power.o reset.o sensors.o system.o - scmi-module-objs := $(scmi-bus-y) $(scmi-driver-y) $(scmi-protocols-y) \ - $(scmi-transport-y) -diff --git a/drivers/firmware/arm_scmi/common.h b/drivers/firmware/arm_scmi/common.h -index 13c9ac176b23..b46dfe84e78b 100644 ---- a/drivers/firmware/arm_scmi/common.h -+++ b/drivers/firmware/arm_scmi/common.h -@@ -165,6 +165,17 @@ int scmi_base_protocol_init(struct scmi_handle *h); - int __init scmi_bus_init(void); - void __exit scmi_bus_exit(void); - -+#ifdef CONFIG_VIRTIO_SCMI -+int __init virtio_scmi_init(void); -+void __exit virtio_scmi_exit(void); -+#else -+static inline int __init virtio_scmi_init(void) -+{ -+ return 0; -+} -+#define virtio_scmi_exit() do { } while (0) -+#endif -+ - #define DECLARE_SCMI_REGISTER_UNREGISTER(func) \ - int __init scmi_##func##_register(void); \ - void __exit scmi_##func##_unregister(void) -@@ -263,6 +274,9 @@ extern const struct scmi_desc scmi_mailbox_desc; - #ifdef CONFIG_HAVE_ARM_SMCCC - extern const struct scmi_desc scmi_smc_desc; - #endif -+#ifdef CONFIG_VIRTIO_SCMI -+extern const struct scmi_desc scmi_virtio_desc; -+#endif - - int scmi_set_transport_info(struct device *dev, void *transport_info); - void *scmi_get_transport_info(struct device *dev); -diff --git a/drivers/firmware/arm_scmi/driver.c b/drivers/firmware/arm_scmi/driver.c -index 93ce17bb4079..540a55285349 100644 ---- a/drivers/firmware/arm_scmi/driver.c -+++ b/drivers/firmware/arm_scmi/driver.c -@@ -996,6 +996,9 @@ static const struct of_device_id scmi_of_match[] = { - #endif - #ifdef CONFIG_HAVE_ARM_SMCCC_DISCOVERY - { .compatible = "arm,scmi-smc", .data = &scmi_smc_desc}, -+#endif -+#ifdef CONFIG_VIRTIO_SCMI -+ { .compatible = "arm,scmi-virtio", .data = &scmi_virtio_desc}, - #endif - { /* Sentinel */ }, - }; -@@ -1014,8 +1017,14 @@ static struct platform_driver scmi_driver = { - - static int __init scmi_driver_init(void) - { -+ int ret; -+ - scmi_bus_init(); - -+ ret = virtio_scmi_init(); -+ if (ret) -+ return ret; -+ - scmi_clock_register(); - scmi_perf_register(); - scmi_power_register(); -@@ -1038,6 +1047,8 @@ static void __exit scmi_driver_exit(void) - scmi_sensors_unregister(); - scmi_system_unregister(); - -+ virtio_scmi_exit(); -+ - platform_driver_unregister(&scmi_driver); - } - module_exit(scmi_driver_exit); -diff --git a/drivers/firmware/arm_scmi/virtio.c b/drivers/firmware/arm_scmi/virtio.c -new file mode 100644 -index 000000000000..f70aa72f34f1 ---- /dev/null -+++ b/drivers/firmware/arm_scmi/virtio.c -@@ -0,0 +1,493 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Virtio Transport driver for Arm System Control and Management Interface -+ * (SCMI). -+ * -+ * Copyright (C) 2020 OpenSynergy. -+ */ -+ -+/** -+ * DOC: Theory of Operation -+ * -+ * The scmi-virtio transport implements a driver for the virtio SCMI device -+ * proposed in virtio spec patch v5[1]. -+ * -+ * There is one tx channel (virtio cmdq, A2P channel) and at most one rx -+ * channel (virtio eventq, P2A channel). Each channel is implemented through a -+ * virtqueue. Access to each virtqueue is protected by a spinlock. -+ * -+ * This SCMI transport uses the scmi_xfer tx/rx buffers for data exchange with -+ * the virtio device to avoid maintenance of additional buffers. -+ * -+ * [1] https://lists.oasis-open.org/archives/virtio-comment/202005/msg00096.html -+ */ -+ -+#include <linux/errno.h> -+#include <linux/of.h> -+#include <linux/of_platform.h> -+#include <linux/platform_device.h> -+#include <linux/module.h> -+#include <linux/slab.h> -+#include <linux/virtio.h> -+#include <linux/virtio_config.h> -+#include <uapi/linux/virtio_ids.h> -+#include <uapi/linux/virtio_scmi.h> -+ -+#include "common.h" -+ -+#define VIRTIO_SCMI_MAX_MSG_SIZE 128 /* Value may be increased. */ -+#define DESCR_PER_TX_MSG 2 -+ -+struct scmi_vio_channel { -+ spinlock_t lock; -+ struct virtqueue *vqueue; -+ struct scmi_chan_info *cinfo; -+ u8 is_rx; -+}; -+ -+union virtio_scmi_input { -+ __virtio32 hdr; -+ struct virtio_scmi_response response; -+ struct virtio_scmi_notification notification; -+}; -+ -+struct scmi_vio_msg { -+ struct virtio_scmi_request *request; -+ union virtio_scmi_input *input; -+ u8 completed; -+}; -+ -+static int scmi_vio_populate_vq_rx(struct scmi_vio_channel *vioch, -+ struct scmi_xfer *xfer) -+{ -+ struct scatterlist sg_in; -+ struct scmi_vio_msg *msg = xfer->extra_data; -+ int rc; -+ -+ msg->completed = false; -+ -+ sg_init_one(&sg_in, msg->input, -+ sizeof(*msg->input) + VIRTIO_SCMI_MAX_MSG_SIZE); -+ -+ rc = virtqueue_add_inbuf(vioch->vqueue, &sg_in, 1, xfer, GFP_ATOMIC); -+ if (rc) -+ dev_err(vioch->cinfo->dev, "%s() rc=%d\n", __func__, rc); -+ else -+ virtqueue_kick(vioch->vqueue); -+ -+ return rc; -+} -+ -+static void scmi_vio_complete_cb(struct virtqueue *vqueue) -+{ -+ struct scmi_vio_channel *vioch = vqueue->priv; -+ unsigned long iflags; -+ unsigned int length; -+ -+ spin_lock_irqsave(&vioch->lock, iflags); -+ -+ do { -+ struct scmi_xfer *xfer; -+ -+ virtqueue_disable_cb(vqueue); -+ -+ while ((xfer = virtqueue_get_buf(vqueue, &length))) { -+ struct scmi_vio_msg *msg = xfer->extra_data; -+ u32 msg_hdr = -+ virtio32_to_cpu(vqueue->vdev, msg->input->hdr); -+ u8 msg_type = MSG_XTRACT_TYPE(msg_hdr); -+ -+ if (!vioch->is_rx) { /* tx queue response */ -+ msg->completed = true; -+ xfer->rx.len = -+ length - sizeof(msg->input->response); -+ if (!xfer->hdr.poll_completion) -+ scmi_rx_callback(vioch->cinfo, msg_hdr); -+ continue; -+ } -+ -+ /* rx queue - notification or delayed response */ -+ switch (msg_type) { -+ case MSG_TYPE_NOTIFICATION: -+ xfer->rx.len = length - -+ sizeof(msg->input->notification); -+ xfer->rx.buf = msg->input->notification.data; -+ break; -+ case MSG_TYPE_DELAYED_RESP: -+ xfer->rx.len = -+ length - sizeof(msg->input->response); -+ xfer->rx.buf = msg->input->response.data; -+ break; -+ default: -+ dev_warn_once(vioch->cinfo->dev, -+ "rx: unknown message_type %d\n", -+ msg_type); -+ scmi_vio_populate_vq_rx(vioch, xfer); -+ continue; -+ } -+ -+ scmi_rx_callback(vioch->cinfo, msg_hdr); -+ scmi_vio_populate_vq_rx(vioch, xfer); -+ } -+ -+ if (unlikely(virtqueue_is_broken(vqueue))) -+ break; -+ } while (!virtqueue_enable_cb(vqueue)); -+ -+ spin_unlock_irqrestore(&vioch->lock, iflags); -+} -+ -+static const char *const scmi_vio_vqueue_names[] = { "tx", "rx" }; -+ -+static vq_callback_t *scmi_vio_complete_callbacks[] = { -+ scmi_vio_complete_cb, -+ scmi_vio_complete_cb -+}; -+ -+static int scmi_vio_match_any_dev(struct device *dev, const void *data) -+{ -+ (void)dev; -+ (void)data; -+ -+ return 1; -+} -+ -+static struct virtio_driver virtio_scmi_driver; /* Forward declaration */ -+ -+static int virtio_link_supplier(struct device *dev) -+{ -+ struct device *vdev = driver_find_device( -+ &virtio_scmi_driver.driver, NULL, NULL, scmi_vio_match_any_dev); -+ -+ if (!vdev) { -+ dev_notice_once( -+ dev, -+ "Deferring probe after not finding a bound scmi-virtio device\n"); -+ return -EPROBE_DEFER; -+ } -+ -+ /* -+ * Add plain device link for completeness. It might have no effect -+ * beyond sysfs. -+ */ -+ if (!device_link_add(dev, vdev, DL_FLAG_AUTOREMOVE_CONSUMER)) { -+ put_device(vdev); -+ dev_err(dev, "Adding link to supplier virtio device failed\n"); -+ return -ECANCELED; -+ } -+ -+ put_device(vdev); -+ return scmi_set_transport_info(dev, dev_to_virtio(vdev)); -+} -+ -+static bool virtio_chan_available(struct device *dev, int idx) -+{ -+ struct virtio_device *vdev; -+ struct scmi_vio_channel **vioch; -+ -+ /* scmi-virtio doesn't support per-protocol channels */ -+ if (is_scmi_protocol_device(dev)) -+ return false; -+ -+ vdev = scmi_get_transport_info(dev); -+ if (!vdev) -+ return false; -+ -+ vioch = vdev->priv; -+ if (!vioch) -+ return false; -+ -+ return vioch[idx] && vioch[idx]->vqueue; -+} -+ -+static int virtio_chan_setup(struct scmi_chan_info *cinfo, struct device *dev, -+ bool tx) -+{ -+ struct virtio_device *vdev; -+ struct scmi_vio_channel **vioch; -+ int vioch_index = tx ? VIRTIO_SCMI_VQ_TX : VIRTIO_SCMI_VQ_RX; -+ -+ /* scmi-virtio doesn't support per-protocol channels */ -+ if (is_scmi_protocol_device(dev)) -+ return -1; -+ -+ vdev = scmi_get_transport_info(dev); -+ if (!vdev) -+ return -1; -+ -+ vioch = vdev->priv; -+ if (!vioch) { -+ dev_err(dev, "Data from scmi-virtio probe not found\n"); -+ return -1; -+ } -+ cinfo->transport_info = vioch[vioch_index]; -+ vioch[vioch_index]->cinfo = cinfo; -+ -+ return 0; -+} -+ -+static int virtio_chan_free(int id, void *p, void *data) -+{ -+ struct scmi_chan_info *cinfo = p; -+ struct scmi_vio_channel *vioch = cinfo->transport_info; -+ -+ if (vioch) { -+ cinfo->transport_info = NULL; -+ kfree(vioch); -+ } -+ -+ scmi_free_channel(cinfo, data, id); -+ return 0; -+} -+ -+static int virtio_get_max_msg(bool tx, struct scmi_chan_info *base_cinfo, -+ int *max_msg) -+{ -+ struct scmi_vio_channel *vioch = base_cinfo->transport_info; -+ -+ *max_msg = virtqueue_get_vring_size(vioch->vqueue); -+ -+ /* Tx messages need multiple descriptors. */ -+ if (tx) -+ *max_msg /= DESCR_PER_TX_MSG; -+ -+ if (*max_msg > MSG_TOKEN_MAX) { -+ dev_notice( -+ base_cinfo->dev, -+ "Only %ld messages can be pending simultaneously, while the virtqueue could hold %d\n", -+ MSG_TOKEN_MAX, *max_msg); -+ *max_msg = MSG_TOKEN_MAX; -+ } -+ -+ return 0; -+} -+ -+static int virtio_xfer_init_buffers(struct scmi_chan_info *cinfo, -+ struct scmi_xfer *xfer, int max_msg_size) -+{ -+ struct scmi_vio_channel *vioch = cinfo->transport_info; -+ struct scmi_vio_msg *msg; -+ -+ msg = devm_kzalloc(cinfo->dev, sizeof(*msg), GFP_KERNEL); -+ if (!msg) -+ return -ENOMEM; -+ -+ xfer->extra_data = msg; -+ -+ if (vioch->is_rx) { -+ int rc; -+ unsigned long iflags; -+ -+ msg->input = devm_kzalloc(cinfo->dev, -+ sizeof(*msg->input) + max_msg_size, -+ GFP_KERNEL); -+ if (!msg->input) -+ return -ENOMEM; -+ -+ /* -+ * xfer->rx.buf will be set to notification or delayed response -+ * specific values in the receive callback, according to the -+ * type of the received message. -+ */ -+ -+ spin_lock_irqsave(&vioch->lock, iflags); -+ rc = scmi_vio_populate_vq_rx(vioch, xfer); -+ spin_unlock_irqrestore(&vioch->lock, iflags); -+ if (rc) -+ return rc; -+ } else { -+ msg->request = -+ devm_kzalloc(cinfo->dev, -+ sizeof(*msg->request) + max_msg_size, -+ GFP_KERNEL); -+ if (!msg->request) -+ return -ENOMEM; -+ -+ xfer->tx.buf = msg->request->data; -+ -+ msg->input = devm_kzalloc( -+ cinfo->dev, sizeof(msg->input->response) + max_msg_size, -+ GFP_KERNEL); -+ if (!msg->input) -+ return -ENOMEM; -+ -+ xfer->rx.buf = msg->input->response.data; -+ } -+ -+ return 0; -+} -+ -+static int scmi_vio_send(struct scmi_vio_channel *vioch, struct scmi_xfer *xfer) -+{ -+ struct scatterlist sg_out; -+ struct scatterlist sg_in; -+ struct scatterlist *sgs[DESCR_PER_TX_MSG] = { &sg_out, &sg_in }; -+ struct scmi_vio_msg *msg = xfer->extra_data; -+ unsigned long iflags; -+ int rc; -+ -+ msg->completed = false; -+ -+ sg_init_one(&sg_out, msg->request, -+ sizeof(*msg->request) + xfer->tx.len); -+ sg_init_one(&sg_in, &msg->input->response, -+ sizeof(msg->input->response) + xfer->rx.len); -+ -+ spin_lock_irqsave(&vioch->lock, iflags); -+ rc = virtqueue_add_sgs(vioch->vqueue, sgs, 1, 1, xfer, GFP_ATOMIC); -+ if (rc) -+ dev_err(vioch->cinfo->dev, "%s() rc=%d\n", __func__, rc); -+ else -+ virtqueue_kick(vioch->vqueue); -+ spin_unlock_irqrestore(&vioch->lock, iflags); -+ -+ return rc; -+} -+ -+static int virtio_send_message(struct scmi_chan_info *cinfo, -+ struct scmi_xfer *xfer) -+{ -+ uint32_t hdr; -+ struct scmi_vio_channel *vioch = cinfo->transport_info; -+ struct virtio_device *vdev = vioch->vqueue->vdev; -+ struct scmi_vio_msg *msg = xfer->extra_data; -+ -+ hdr = pack_scmi_header(&xfer->hdr); -+ -+ msg->request->hdr = cpu_to_virtio32(vdev, hdr); -+ -+ return scmi_vio_send(vioch, xfer); -+} -+ -+static void virtio_fetch_response(struct scmi_chan_info *cinfo, -+ struct scmi_xfer *xfer) -+{ -+ struct scmi_vio_channel *vioch = cinfo->transport_info; -+ struct scmi_vio_msg *msg = xfer->extra_data; -+ -+ xfer->hdr.status = virtio32_to_cpu(vioch->vqueue->vdev, -+ msg->input->response.status); -+} -+ -+static void dummy_fetch_notification(struct scmi_chan_info *cinfo, -+ size_t max_len, struct scmi_xfer *xfer) -+{ -+ (void)cinfo; -+ (void)max_len; -+ (void)xfer; -+} -+ -+static void dummy_clear_channel(struct scmi_chan_info *cinfo) -+{ -+ (void)cinfo; -+} -+ -+static bool virtio_poll_done(struct scmi_chan_info *cinfo, -+ struct scmi_xfer *xfer) -+{ -+ struct scmi_vio_channel *vioch = cinfo->transport_info; -+ struct scmi_vio_msg *msg = xfer->extra_data; -+ unsigned long iflags; -+ bool completed; -+ -+ spin_lock_irqsave(&vioch->lock, iflags); -+ completed = msg->completed; -+ spin_unlock_irqrestore(&vioch->lock, iflags); -+ -+ return completed; -+} -+ -+static const struct scmi_transport_ops scmi_virtio_ops = { -+ .link_supplier = virtio_link_supplier, -+ .chan_available = virtio_chan_available, -+ .chan_setup = virtio_chan_setup, -+ .chan_free = virtio_chan_free, -+ .get_max_msg = virtio_get_max_msg, -+ .send_message = virtio_send_message, -+ .fetch_response = virtio_fetch_response, -+ .fetch_notification = dummy_fetch_notification, -+ .clear_channel = dummy_clear_channel, -+ .poll_done = virtio_poll_done, -+ .xfer_init_buffers = virtio_xfer_init_buffers, -+}; -+ -+const struct scmi_desc scmi_virtio_desc = { -+ .ops = &scmi_virtio_ops, -+ .max_rx_timeout_ms = 60000, /* for non-realtime virtio devices */ -+ .max_msg = 0, /* overridden by virtio_get_max_msg() */ -+ .max_msg_size = VIRTIO_SCMI_MAX_MSG_SIZE, -+}; -+ -+static int scmi_vio_probe(struct virtio_device *vdev) -+{ -+ struct device *dev = &vdev->dev; -+ struct scmi_vio_channel **vioch; -+ bool have_vq_rx; -+ int vq_cnt; -+ int i; -+ struct virtqueue *vqs[VIRTIO_SCMI_VQ_MAX_CNT]; -+ -+ vioch = devm_kcalloc(dev, VIRTIO_SCMI_VQ_MAX_CNT, sizeof(*vioch), -+ GFP_KERNEL); -+ if (!vioch) -+ return -ENOMEM; -+ -+ have_vq_rx = virtio_has_feature(vdev, VIRTIO_SCMI_F_P2A_CHANNELS); -+ vq_cnt = have_vq_rx ? VIRTIO_SCMI_VQ_MAX_CNT : 1; -+ -+ for (i = 0; i < vq_cnt; i++) { -+ vioch[i] = devm_kzalloc(dev, sizeof(**vioch), GFP_KERNEL); -+ if (!vioch[i]) -+ return -ENOMEM; -+ } -+ -+ if (have_vq_rx) -+ vioch[VIRTIO_SCMI_VQ_RX]->is_rx = true; -+ -+ if (virtio_find_vqs(vdev, vq_cnt, vqs, scmi_vio_complete_callbacks, -+ scmi_vio_vqueue_names, NULL)) { -+ dev_err(dev, "Failed to get %d virtqueue(s)\n", vq_cnt); -+ return -1; -+ } -+ dev_info(dev, "Found %d virtqueue(s)\n", vq_cnt); -+ -+ for (i = 0; i < vq_cnt; i++) { -+ spin_lock_init(&vioch[i]->lock); -+ vioch[i]->vqueue = vqs[i]; -+ vioch[i]->vqueue->priv = vioch[i]; -+ } -+ -+ vdev->priv = vioch; -+ -+ virtio_device_ready(vdev); -+ -+ return 0; -+} -+ -+static unsigned int features[] = { -+ VIRTIO_SCMI_F_P2A_CHANNELS, -+}; -+ -+static const struct virtio_device_id id_table[] = { -+ { VIRTIO_ID_SCMI, VIRTIO_DEV_ANY_ID }, -+ { 0 } -+}; -+ -+static struct virtio_driver virtio_scmi_driver = { -+ .driver.name = "scmi-virtio", -+ .driver.owner = THIS_MODULE, -+ .feature_table = features, -+ .feature_table_size = ARRAY_SIZE(features), -+ .id_table = id_table, -+ .probe = scmi_vio_probe, -+}; -+ -+int __init virtio_scmi_init(void) -+{ -+ return register_virtio_driver(&virtio_scmi_driver); -+} -+ -+void __exit virtio_scmi_exit(void) -+{ -+ unregister_virtio_driver(&virtio_scmi_driver); -+} -diff --git a/include/uapi/linux/virtio_ids.h b/include/uapi/linux/virtio_ids.h -index bc740d6d2259..287daba2abdb 100644 ---- a/include/uapi/linux/virtio_ids.h -+++ b/include/uapi/linux/virtio_ids.h -@@ -49,5 +49,6 @@ - #define VIRTIO_ID_FS 26 /* virtio filesystem */ - #define VIRTIO_ID_PMEM 27 /* virtio pmem */ - #define VIRTIO_ID_MAC80211_HWSIM 29 /* virtio mac80211-hwsim */ -+#define VIRTIO_ID_SCMI 32 /* virtio SCMI */ - - #endif /* _LINUX_VIRTIO_IDS_H */ -diff --git a/include/uapi/linux/virtio_scmi.h b/include/uapi/linux/virtio_scmi.h -new file mode 100644 -index 000000000000..9f21b3dbbfe2 ---- /dev/null -+++ b/include/uapi/linux/virtio_scmi.h -@@ -0,0 +1,41 @@ -+/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ -+/* -+ * Copyright (C) 2020 OpenSynergy GmbH -+ */ -+ -+#ifndef _UAPI_LINUX_VIRTIO_SCMI_H -+#define _UAPI_LINUX_VIRTIO_SCMI_H -+ -+#include <linux/virtio_types.h> -+ -+/* Feature bits */ -+ -+/* Device implements some SCMI notifications, or delayed responses. */ -+#define VIRTIO_SCMI_F_P2A_CHANNELS 0 -+ -+/* Device implements any SCMI statistics shared memory region */ -+#define VIRTIO_SCMI_F_SHARED_MEMORY 1 -+ -+/* Virtqueues */ -+ -+#define VIRTIO_SCMI_VQ_TX 0 /* cmdq */ -+#define VIRTIO_SCMI_VQ_RX 1 /* eventq */ -+#define VIRTIO_SCMI_VQ_MAX_CNT 2 -+ -+struct virtio_scmi_request { -+ __virtio32 hdr; -+ __u8 data[]; -+}; -+ -+struct virtio_scmi_response { -+ __virtio32 hdr; -+ __virtio32 status; -+ __u8 data[]; -+}; -+ -+struct virtio_scmi_notification { -+ __virtio32 hdr; -+ __u8 data[]; -+}; -+ -+#endif /* _UAPI_LINUX_VIRTIO_SCMI_H */ diff --git a/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio_scmi.cfg b/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio_scmi.cfg index 4159ae58..b698e64a 100644 --- a/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio_scmi.cfg +++ b/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio_scmi.cfg @@ -1,5 +1,25 @@ +# Enable ARM_SCMI_PROTOCOL ("ARM System Control and Management Interface (SCMI) +# Message Protocol") config located in menu +# +# -> Device Drivers +# -> Firmware Drivers +# -> ARM System Control and Management Interface Protocol +# +# After that, in the same menu enabled: +# +# * ARM_SCMI_TRANSPORT_VIRTIO ("SCMI transport based on VirtIO") +# +# and disabled not used features: +# +# * ARM_SCMI_TRANSPORT_SMC ("SCMI transport based on SMC") +# * ARM_SCMI_POWER_DOMAIN ("SCMI power domain driver") + CONFIG_ARM_SCMI_PROTOCOL=y -CONFIG_VIRTIO_SCMI=y +CONFIG_ARM_SCMI_HAVE_TRANSPORT=y +CONFIG_ARM_SCMI_HAVE_MSG=y +# CONFIG_ARM_SCMI_TRANSPORT_SMC is not set +CONFIG_ARM_SCMI_TRANSPORT_VIRTIO=y # CONFIG_ARM_SCMI_POWER_DOMAIN is not set # CONFIG_SENSORS_ARM_SCMI is not set # CONFIG_COMMON_CLK_SCMI is not set +# CONFIG_IIO_SCMI is not set diff --git a/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio_video.cfg b/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio_video.cfg index 252bcfeb..75b1a3ca 100644 --- a/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio_video.cfg +++ b/meta-egvirt/recipes-kernel/linux/linux-yocto/virtio_video.cfg @@ -1,4 +1,26 @@ -CONFIG_FRAME_VECTOR=y +# Enable MEDIA_SUPPORT ("Multimedia support") menuconfig located in menu +# +# -> Device Drivers +# +# Enable MEDIA_PLATFORM_SUPPORT ("Platform-specific devices") config located in +# submenu +# +# -> Multimedia support (MEDIA_SUPPORT [=y]) +# -> Media device types +# +# of the enabled "Multimedia support" menuconfig. +# +# Enable VIDEO_VIRTIO ("Virtio video driver") config located in submenu +# +# -> Multimedia support (MEDIA_SUPPORT [=y]) +# -> Media drivers +# +# of the enabled "Multimedia support" menuconfig. +# +# Disable MEDIA_SUBDRV_AUTOSELECT ("Autoselect ancillary drivers (tuners, +# sensors, i2c, spi, frontends)") config located in the enabled "Multimedia +# support" menuconfig. This allows avoid autoselection of unneeded drivers. + CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_SUPPORT_FILTER=y # CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set diff --git a/meta-egvirt/recipes-kernel/linux/linux-yocto_%.bbappend b/meta-egvirt/recipes-kernel/linux/linux-yocto_%.bbappend index 4401de95..4d276591 100644 --- a/meta-egvirt/recipes-kernel/linux/linux-yocto_%.bbappend +++ b/meta-egvirt/recipes-kernel/linux/linux-yocto_%.bbappend @@ -2,32 +2,11 @@ FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:" # virtio SCMI SRC_URI += " \ - file://virtio-scmi/0001-firmware-arm_scmi-smccc-mailbox-Make-shmem-based-tra.patch \ - file://virtio-scmi/0002-firmware-arm_scmi-Document-that-max_msg-is-a-per-cha.patch \ - file://virtio-scmi/0003-firmware-arm_scmi-Add-op-to-override-max-message.patch \ - file://virtio-scmi/0004-firmware-arm_scmi-Add-per-message-transport-data.patch \ - file://virtio-scmi/0005-firmware-arm_scmi-Add-xfer_init_buffers-transport-op.patch \ - file://virtio-scmi/0006-firmware-arm_scmi-Add-optional-link_supplier-transpo.patch \ - file://virtio-scmi/0007-firmware-arm_scmi-Add-per-device-transport-private-i.patch \ - file://virtio-scmi/0008-firmware-arm_scmi-Add-is_scmi_protocol_device.patch \ - file://virtio-scmi/0009-dt-bindings-arm-Add-virtio-transport-for-SCMI.patch \ - file://virtio-scmi/0010-firmware-arm_scmi-Add-virtio-transport.patch \ file://virtio_scmi.cfg \ " -# SCMI updates -SRC_URI += " \ - file://scmi/0001-firmware-arm_scmi-rework-scmi_sensors_protocol_init.patch \ - file://scmi/0002-firmware-arm_scmi-add-SCMIv3.0-Sensors-descriptors-e.patch \ - file://scmi/0003-hwmon-scmi-update-hwmon-internal-scale-data-type.patch \ - file://scmi/0004-firmware-arm_scmi-add-SCMIv3.0-Sensors-timestamped-r.patch \ - file://scmi/0005-firmware-arm_scmi-add-SCMIv3.0-Sensor-configuration-.patch \ - file://scmi/0006-firmware-arm_scmi-add-SCMIv3.0-Sensor-notifications.patch \ -" - # IIO SCMI SRC_URI += " \ - file://iio-scmi/0001-iio-scmi-Adding-support-for-IIO-SCMI-Based-Sensors.patch \ file://iio-scmi/0002-iio-core-Introduce-IIO_VAL_INT_64.patch \ file://iio-scmi/0003-iio-scmi-Add-reading-raw-attribute.patch \ file://iio_scmi.cfg \ |