diff options
Diffstat (limited to 'meta-pipewire/recipes-multimedia/wireplumber/wireplumber-board-config-agl_git.bb')
| -rw-r--r-- | meta-pipewire/recipes-multimedia/wireplumber/wireplumber-board-config-agl_git.bb | 73 |
1 files changed, 43 insertions, 30 deletions
diff --git a/meta-pipewire/recipes-multimedia/wireplumber/wireplumber-board-config-agl_git.bb b/meta-pipewire/recipes-multimedia/wireplumber/wireplumber-board-config-agl_git.bb index 7ed9ea1a..d569a230 100644 --- a/meta-pipewire/recipes-multimedia/wireplumber/wireplumber-board-config-agl_git.bb +++ b/meta-pipewire/recipes-multimedia/wireplumber/wireplumber-board-config-agl_git.bb @@ -7,7 +7,14 @@ SECTION = "multimedia" LICENSE = "MIT" LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302" -SRC_URI = "file://wireplumber.conf.in" +SRC_URI = "\ + file://wireplumber.conf \ + file://default.streams \ + file://default-output-audio.endpoint-link.in \ + file://default-input-audio.endpoint-link.in \ + file://bluealsa-output-audio.endpoint-link.in \ + file://bluealsa-input-audio.endpoint-link.in \ +" PACKAGE_ARCH = "${MACHINE_ARCH}" @@ -15,48 +22,54 @@ do_configure[noexec] = "1" do_compile[noexec] = "1" # -# For device names, any unique substring of the "endpoint" name is valid. -# To list all endpoints: +# Device preferences are configured by listing a subset of the properties +# that the device node has on pipewire. +# +# Every property match needs to have a property name and an expected value. +# The values support shell-like pattern matching using the * and ? characters. +# The syntax adheres to the rules of TOML v0.5 table array. +# +# To list all device node properties, you can run (on the target): # export XDG_RUNTIME_DIR=/run/user/1001 -# pipewire-cli -# > connect pipewire-0 -# > list-objects -# ... and look for objects of type "PipeWire:Interface:Endpoint/0" +# wireplumber-cli # -# For instance: -# id 269, parent 40, type PipeWire:Interface:Endpoint/0 -# media.name = "USB Audio on WD15 Dock (hw:1,0 / node 5)" -# media.class = "Audio/Sink" -# id 270, parent 40, type PipeWire:Interface:Endpoint/0 -# media.name = "USB Audio on WD15 Dock (hw:1,0 / node 7)" -# media.class = "Audio/Source" +# Another way to figure out some of these properties is by parsing the +# aplay/arecord output. For example, this line is interpreted as follows: # -# Audio/Sink endpoints are valid for playback -# Audio/Source endpoints are valid for capture +# card 0: PCH [HDA Intel PCH], device 2: ALC3246 [ALC3246 Analog] # -# Wireplumber will first filter endpoints based on the media.class, depending -# on whether the client is doing playback or capture and then it will look -# for a sub-string match in the media.name +# api.alsa.path = "hw:0,2" +# api.alsa.card = "0" +# api.alsa.card.id = "PCH" +# api.alsa.card.name = "HDA Intel PCH" +# api.alsa.pcm.device = "2" +# api.alsa.pcm.id = "ALC3246" +# api.alsa.pcm.name = "ALC3246 Analog" # -DEV_PLAYBACK = "hw:0,0" -DEV_CAPTURE = "hw:0,0" +DEV_PLAYBACK = '{ name = \"api.alsa.path\", value = \"hw:0,0\" }' +DEV_CAPTURE = '{ name = \"api.alsa.path\", value = \"hw:0,0\" }' -DEV_PLAYBACK_dra7xx-evm = "DRA7xx-EVM" -DEV_CAPTURE_dra7xx-evm = "DRA7xx-EVM" +DEV_PLAYBACK_dra7xx-evm = '{ name = \"api.alsa.card.name\", value = \"DRA7xx-EVM\" }' +DEV_CAPTURE_dra7xx-evm = '{ name = \"api.alsa.card.name\", value = \"DRA7xx-EVM\" }' -DEV_PLAYBACK_m3ulcb = "ak4613" -DEV_CAPTURE_m3ulcb = "ak4613" +DEV_PLAYBACK_m3ulcb = '{ name = \"api.alsa.card.name\", value = \"ak4613\" }' +DEV_CAPTURE_m3ulcb = '{ name = \"api.alsa.card.name\", value = \"ak4613\" }' -DEV_PLAYBACK_h3ulcb = "ak4613" -DEV_CAPTURE_h3ulcb = "ak4613" +DEV_PLAYBACK_h3ulcb = '{ name = \"api.alsa.card.name\", value = \"ak4613\" }' +DEV_CAPTURE_h3ulcb = '{ name = \"api.alsa.card.name\", value = \"ak4613\" }' -DEV_PLAYBACK_raspberrypi3 = "bcm2835 ALSA on bcm2835 ALSA" -DEV_CAPTURE_raspberrypi3 = "hw:0,0" +DEV_PLAYBACK_raspberrypi3 = '{ name = \"api.alsa.pcm.name\", value = \"bcm2835 ALSA\" }, { name = \"api.alsa.card.name\", value = \"bcm2835 ALSA\" }' +DEV_CAPTURE_raspberrypi3 = '{ name = \"api.alsa.path\", value = \"hw:0,0\" }' do_install_append() { - sed -e "s/PLAYBACK/${DEV_PLAYBACK}/" -e "s/CAPTURE/${DEV_CAPTURE}/" ${WORKDIR}/wireplumber.conf.in > ${WORKDIR}/wireplumber.conf + sed -e "s/PLAYBACK_DEV_PROPERTIES/${DEV_PLAYBACK}/" -e "s/CAPTURE_DEV_PROPERTIES/${DEV_CAPTURE}/" ${WORKDIR}/default-output-audio.endpoint-link.in > ${WORKDIR}/default-output-audio.endpoint-link + sed -e "s/PLAYBACK_DEV_PROPERTIES/${DEV_PLAYBACK}/" -e "s/CAPTURE_DEV_PROPERTIES/${DEV_CAPTURE}/" ${WORKDIR}/default-input-audio.endpoint-link.in > ${WORKDIR}/default-input-audio.endpoint-link + sed -e "s/PLAYBACK_DEV_PROPERTIES/${DEV_PLAYBACK}/" -e "s/CAPTURE_DEV_PROPERTIES/${DEV_CAPTURE}/" ${WORKDIR}/bluealsa-output-audio.endpoint-link.in > ${WORKDIR}/bluealsa-output-audio.endpoint-link + sed -e "s/PLAYBACK_DEV_PROPERTIES/${DEV_PLAYBACK}/" -e "s/CAPTURE_DEV_PROPERTIES/${DEV_CAPTURE}/" ${WORKDIR}/bluealsa-input-audio.endpoint-link.in > ${WORKDIR}/bluealsa-input-audio.endpoint-link install -d ${D}/${sysconfdir}/wireplumber/ install -m 644 ${WORKDIR}/wireplumber.conf ${D}/${sysconfdir}/wireplumber/wireplumber.conf + install -m 644 ${WORKDIR}/default.streams ${D}/${sysconfdir}/wireplumber/default.streams + install -m 644 ${WORKDIR}/*.endpoint-link ${D}/${sysconfdir}/wireplumber/ } FILES_${PN} += "\ |