# Reference Hardware Board - [About](#about) - [Difference to Salvator-XS When Flashing Firmware](#difference-to-salvator-xs-when-flashing-firmware) - [How to Build the Flash Writer](#how-to-build-the-flash-writer) - [How to Flash Firmware](#how-to-flash-firmware) - [How to Build the Firmware](#how-to-build-the-firmware) ## About The AGL Reference hardware board with R-Car H3 SoC is made by Panasonic for the AGL community. ## Difference to Salvator-XS When Flashing Firmware The HyperFlash/QSPI flash switch function is not implemented on the reference hardware board at present, HyperFlash and QSPI flash are not used. Firmware (arm-trusted-firmware, U-Boot...) is stored in eMMC and updated by using serial download. ## How to build the Flash Writer 1. Get the prebuilt cross compiler: ``` $ cd ~/ $ wget https://releases.linaro.org/components/toolchain/binaries/7.3-2018.05/aarch64-elf/gcc-linaro-7.3.1-2018.05-x86_64_aarch64-elf.tar.xz $ tar xvf gcc-linaro-7.3.1-2018.05-x86_64_aarch64-elf.tar.xz ``` 2. Prepare the source code: ``` $ cd ~/ $ git clone https://github.com/renesas-rcar/flash_writer.git $ cd flash_writer $ git checkout rcar_gen3 ``` 3. Build the Flash Writer ``` $ make AArch=64 clean $ CROSS_COMPILE=~/gcc-linaro-7.3.1-2018.05-x86_64_aarch64-elf/bin/aarch64-elf- make AArch=64 ``` The output image is at: ``` ./AArch64_output/AArch64_Flash_writer_SCIF_DUMMY_CERT_E6300400_salvator-x.mot ``` ## How to Flash Firmware 1. Connect reference hardware board to the development PC by using USB serial cable. 2. Open a serial console (like Teraterm in Windows, or gtkterm in Ubuntu that can easily send files) with a baudrate of 115200n8. 4. Set bit2 of SW2221 (on the top of SoC board) to "off"which turns SW2221 to be off,off,off,off. 5. Power on the reference board, you will find following message on the serial console: ``` SCIF Download mode (w/o verification) (C) Renesas Electronics Corp. -- Load Program to SystemRAM --------------- please send ! ``` 6. Use console application menu to send the flash writer binary: ``` AArch64_Flash_writer_SCIF_DUMMY_CERT_E6300400_salvator-x.mot ``` 7. After the writer is transferred correctly, the following message will be displayed: ``` Flash writer for R-Car H3/M3/M3N Series V1.11 Feb.12,2020 > ``` 8. Set reference board to boot from eMMC: \> **EM_SECSD** Please Input EXT_CSD Index(H'00 - H'1FF) :**b1** EXT_CSD[B1] = 0x00 Please Input Value(H'00 - H'FF) :**a** EXT_CSD[B1] = 0x0A \> **EM_SECSD** Please Input EXT_CSD Index(H'00 - H'1FF) :**b3** EXT_CSD[B3] = 0x00 Please Input Value(H'00 - H'FF) :**8** EXT_CSD[B3] = 0x08 \>**EM_DCSD** [CSD Field Data] [127:126] CSD_STRUCTURE 0x03 [125:122] SPEC_VERS 0x04 [119:112] TAAC 0x27 [111:104] NSAC 0x01 [103: 96] TRAN_SPEED 0x32 [ 95: 84] CCC 0x00F5 [ 83: 80] READ_BL_LEN 0x09 [ 79: 79] READ_BL_PARTIAL 0x00 [ 78: 78] WRITE_BLK_MISALIGN 0x00 [ 77: 77] READ_BLK_MISALIGN 0x00 [ 76: 76] DSR_IMP 0x00 [ 73: 62] C_SIZE 0x0FFF [ 61: 59] VDD_R_CURR_MIN 0x06 [ 58: 56] VDD_R_CURR_MAX 0x06 [ 55: 53] VDD_W_CURR_MIN 0x06 [ 52: 50] VDD_W_CURR_MAX 0x06 [ 49: 47] C_SIZE_MULT 0x07 [ 46: 42] ERASE_GRP_SIZE 0x1F [ 41: 37] ERASE_GRP_MULT 0x1F [ 36: 32] WP_GRP_SIZE 0x0F [ 31: 31] WP_GRP_ENABLE 0x01 [ 30: 29] DEFAULT_ECC 0x00 [ 28: 26] R2W_FACTOR 0x03 [ 25: 22] WRITE_BL_LEN 0x09 [ 21: 21] WRITE_BL_PARTIAL 0x00 [ 16: 16] CONTENT_PROT_APP 0x00 [ 15: 15] FILE_FORMAT_GRP 0x00 [ 14: 14] COPY 0x01 [ 13: 13] PERM_WRITE_PROTECT 0x00 [ 12: 12] TMP_WRITE_PROTECT 0x00 [ 11: 10] FILE_FORMAT 0x00 [ 9: 8] ECC 0x00 [ 7: 1] CRC 0x00 9. Flash the firmware. If using an AGL build with the agl-refhw-h3 feature, you can find the firmware files under the build directory in `tmp/deploy/images/h3ulcb`. If you use the reference hardware numbered 100 or above, please flash the firmware with the suffix "-agl-refhw-4x2g-1rank". The firmware should be stored on the eMMC as follows: | Name | eMMC partition | Flash address | Load address | Description |-------------------------------------|:--------------:|:-------------:|:------------:|------------------| | bootparam_sa0-agl-refhw-4x2g.srec | 1 | H'000000 | H'E6320000 | Boot parameter | bl2-agl-refhw-4x2g.srec | 1 | H'00001E | H'E6304000 | bl2 loader | cert_header_sa6-agl-refhw-4x2g.srec | 1 | H'000180 | H'E6320000 | Certification | bl31-agl-refhw-4x2g.srec | 1 | H'000200 | H'44000000 | bl3 loader | tee-h3ulcb.srec | 1 | H'001000 | H'44100000 | OP-Tee | u-boot-elf-agl-refhw-4x2g.srec | 2 | H'000000 | H'50000000 | U-boot If the firmware has been built using a standalone build outside of AGL (see [below](#standalone-build)), then the firmware files can be be found in `tmp/deploy/images/agl-refhw-h3`, and should be stored on the eMMC as follows: | Name | eMMC partition | Flash address | Load address | Description |-------------------------------------|:--------------:|:-------------:|:------------:|------------------| | bootparam_sa0-4x2g.srec | 1 | H'000000 | H'E6320000 | Boot parameter | bl2-agl-refhw-h3-4x2g.srec | 1 | H'00001E | H'E6304000 | bl2 loader | cert_