This README file contains information on the contents of the
hmi-framework layer.
Please see the corresponding sections below for details.
HMI Framework
================
meta-hmi-framework is the layer providing HMI framework.
HMI framework provides HMI resource(right) management. Resource contains sound, window, input to control.
This is based on the document in https://wiki.automotivelinux.org/hmiframework
Maintainers:
Takeshi Hoshina<takeshi_hoshina@mail.toyota.co.jp>
Hiroshi Kojima<Hiroshi_Kojima@mentor.com>
Kazumasa Mitsunari<knimitz@witz-inc.co.jp>
How to enable the framework
=================
In order to enable the HMI Framework features, the following line has to be enabled in local.conf
IMAGE_INSTALL_append += ""
Reference
=================
https://wiki.automotivelinux.org/hmiframework
I. Adding the hmi-framework layer to your build
=================================================
--- replace with specific instructions for the hmi-framework layer ---
In order to use this layer, you need to make the build system aware of
it.
Assuming the hmi-framework layer exists at the top-level of your
yocto build tree, you can add it to the build system by adding the
location of the hmi-framework layer to bblayers.conf, along with any
other layers needed. e.g.:
BBLAYERS ?= " \
/path/to/yocto/meta \
/path/to/yocto/meta-poky \
/path/to/yocto/meta-yocto-bsp \
/path/to/yocto/meta-hmi-framework \
"
II. Misc
========
--- replace with specific information about the hmi-framework layer ---