Wipe out sota-related codeeel_4.99.3eel_4.99.2eel_4.99.1eel/4.99.3eel/4.99.2eel/4.99.1dab_3.99.1dab/3.99.14.99.34.99.24.99.13.99.1

Moved to meta-updater@github.com/advancedtelenmatic

Change-Id: I7c89d373e43a88a89155c72de87c0b4b5238bc52
Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>

1 files changed, 0 insertions, 196 deletions

diff --git a/meta-sota/classes/sdcard_image-rpi-ota.bbclass b/meta-sota/classes/sdcard_image-rpi-ota.bbclass
deleted file mode 100644
index deea8d1..0000000
--- a/meta-sota/classes/sdcard_image-rpi-ota.bbclass
+++ /dev/null
@@ -1,196 +0,0 @@
-inherit image_types
-inherit linux-raspberrypi-base
-
-#
-# Create an image that can by written onto a SD card using dd.
-#
-# The disk layout used is:
-#
-#    0                      -> IMAGE_ROOTFS_ALIGNMENT         - reserved for other data
-#    IMAGE_ROOTFS_ALIGNMENT -> BOOT_SPACE                     - bootloader and kernel
-#    BOOT_SPACE             -> SDIMG_OTA_SIZE                 - rootfs
-#
-
-#                                                     Default Free space = 1.3x
-#                                                     Use IMAGE_OVERHEAD_FACTOR to add more space
-#                                                     <--------->
-#            4MiB              40MiB           SDIMG_OTA_ROOTFS
-# <-----------------------> <----------> <---------------------->
-#  ------------------------ ------------ ------------------------
-# | IMAGE_ROOTFS_ALIGNMENT | BOOT_SPACE | OTAROOT_SIZE           |
-#  ------------------------ ------------ ------------------------
-# ^                        ^            ^                        ^
-# |                        |            |                        |
-# 0                      4MiB     4MiB + 40MiB       4MiB + 40Mib + SDIMG_OTA_ROOTFS
-
-# This image depends on the rootfs image
-IMAGE_TYPEDEP_rpi-sdimg-ota = "${SDIMG_OTA_ROOTFS_TYPE}"
-
-# Set kernel and boot loader
-IMAGE_BOOTLOADER ?= "bcm2835-bootfiles"
-
-# Set initramfs extension
-KERNEL_INITRAMFS ?= ""
-
-# Kernel image name
-SDIMG_OTA_KERNELIMAGE_raspberrypi  ?= "kernel.img"
-SDIMG_OTA_KERNELIMAGE_raspberrypi2 ?= "kernel7.img"
-
-# Boot partition volume id
-BOOTDD_VOLUME_ID ?= "${MACHINE}"
-
-# Boot partition size [in KiB] (will be rounded up to IMAGE_ROOTFS_ALIGNMENT)
-BOOT_SPACE ?= "40960"
-
-# Set alignment to 4MB [in KiB]
-IMAGE_ROOTFS_ALIGNMENT = "4096"
-
-# Use an uncompressed ext3 by default as rootfs
-SDIMG_OTA_ROOTFS_TYPE ?= "otaimg"
-SDIMG_OTA_ROOTFS = "${DEPLOY_DIR_IMAGE}/${IMAGE_LINK_NAME}.${SDIMG_OTA_ROOTFS_TYPE}"
-
-IMAGE_DEPENDS_rpi-sdimg-ota = " \
-			parted-native \
-			mtools-native \
-			dosfstools-native \
-			virtual/kernel:do_deploy \
-			${IMAGE_BOOTLOADER} \
-			u-boot \
-			"
-IMAGE_TYPEDEP_rpi-sdimg-ota = "otaimg"
-
-# SD card image name
-SDIMG_OTA = "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.rpi-sdimg-ota"
-
-# Compression method to apply to SDIMG_OTA after it has been created. Supported
-# compression formats are "gzip", "bzip2" or "xz". The original .rpi-sdimg-ota file
-# is kept and a new compressed file is created if one of these compression
-# formats is chosen. If SDIMG_OTA_COMPRESSION is set to any other value it is
-# silently ignored.
-#SDIMG_OTA_COMPRESSION ?= ""
-
-# Additional files and/or directories to be copied into the vfat partition from the IMAGE_ROOTFS.
-FATPAYLOAD ?= ""
-
-IMAGEDATESTAMP = "${@time.strftime('%Y.%m.%d',time.gmtime())}"
-IMAGE_CMD_rpi-sdimg-ota[vardepsexclude] += "IMAGEDATESTAMP"
-IMAGE_CMD_rpi-sdimg-ota[vardepsexclude] += "DATETIME"
-
-IMAGE_CMD_rpi-sdimg-ota () {
-
-	# Align partitions
-	OTAROOT_SIZE=`du -Lb ${SDIMG_OTA_ROOTFS} | cut -f1`
-	OTAROOT_SIZE=$(expr ${OTAROOT_SIZE} / 1024 + 1)
-	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1)
-	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE_ALIGNED} - ${BOOT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT})
-	SDIMG_OTA_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + $OTAROOT_SIZE)
-
-	echo "Creating filesystem with Boot partition ${BOOT_SPACE_ALIGNED} KiB and RootFS $OTAROOT_SIZE KiB"
-
-	# Check if we are building with device tree support
-	DTS="${@get_dts(d, None)}"
-
-	# Initialize sdcard image file
-	dd if=/dev/zero of=${SDIMG_OTA} bs=1024 count=0 seek=${SDIMG_OTA_SIZE}
-
-	# Create partition table
-	parted -s ${SDIMG_OTA} mklabel msdos
-	# Create boot partition and mark it as bootable
-	parted -s ${SDIMG_OTA} unit KiB mkpart primary fat32 ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT})
-	parted -s ${SDIMG_OTA} set 1 boot on
-	# Create rootfs partition to the end of disk
-	parted -s ${SDIMG_OTA} -- unit KiB mkpart primary ext2 $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT}) -1s
-	parted ${SDIMG_OTA} print
-
-	# Create a vfat image with boot files
-	BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDIMG_OTA} unit b print | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 512 /2 }')
-	rm -f ${WORKDIR}/boot.img
-	mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS
-	sync
-
-	mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/bcm2835-bootfiles/* ::/
-	
-	if test -n "${DTS}"; then
-		# Device Tree Overlays are assumed to be suffixed by '-overlay.dtb' string and will be put in a dedicated folder
-		DT_OVERLAYS="${@split_overlays(d, 0)}"
-		DT_ROOT="${@split_overlays(d, 1)}"
-
-		# Copy board device trees to root folder
-		for DTB in ${DT_ROOT}; do
-			DTB_BASE_NAME=`basename ${DTB} .dtb`
-
-			mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTB_BASE_NAME}.dtb ::${DTB_BASE_NAME}.dtb
-		done
-
-		# Copy device tree overlays to dedicated folder
-		mmd -i ${WORKDIR}/boot.img overlays
-		for DTB in ${DT_OVERLAYS}; do
-			DTB_EXT=${DTB##*.}
-			DTB_BASE_NAME=`basename ${DTB} ."${DTB_EXT}"`
-
-			mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTB_BASE_NAME}.${DTB_EXT} ::overlays/${DTB_BASE_NAME}.${DTB_EXT}
-		done
-	fi
-
-	case "${KERNEL_IMAGETYPE}" in
-	"uImage")
-		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/u-boot.bin ::${SDIMG_OTA_KERNELIMAGE}
-		;;
-	*)
-		bbfatal "Kernel uImage is required for OTA image. Please set KERNEL_IMAGETYPE to \"uImage\""
-		;;
-	esac
-
-	if [ -n ${FATPAYLOAD} ] ; then
-		echo "Copying payload into VFAT"
-		for entry in ${FATPAYLOAD} ; do
-				# add the || true to stop aborting on vfat issues like not supporting .~lock files
-				mcopy -i ${WORKDIR}/boot.img -s -v ${IMAGE_ROOTFS}$entry :: || true
-		done
-	fi
-
-	# Add stamp file
-	echo "${IMAGE_NAME}-${IMAGEDATESTAMP}" > ${WORKDIR}/image-version-info
-	mcopy -i ${WORKDIR}/boot.img -v ${WORKDIR}//image-version-info ::
-
-	# Burn Partitions
-	sync
-	dd if=${WORKDIR}/boot.img of=${SDIMG_OTA} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
-	# If SDIMG_OTA_ROOTFS_TYPE is a .xz file use xzcat
-	if echo "${SDIMG_OTA_ROOTFS_TYPE}" | egrep -q "*\.xz"
-	then
-		xzcat ${SDIMG_OTA_ROOTFS} | dd of=${SDIMG_OTA} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
-	else
-		dd if=${SDIMG_OTA_ROOTFS} of=${SDIMG_OTA} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
-	fi
-
-	# Optionally apply compression
-	case "${SDIMG_OTA_COMPRESSION}" in
-	"gzip")
-		gzip -k9 "${SDIMG_OTA}"
-		;;
-	"bzip2")
-		bzip2 -k9 "${SDIMG_OTA}"
-		;;
-	"xz")
-		xz -k "${SDIMG_OTA}"
-		;;
-	esac
-
-	rm -f ${DEPLOY_DIR_IMAGE}/${IMAGE_LINK_NAME}.rootfs.rpi-sdimg-ota
-	ln -s ${IMAGE_NAME}.rootfs.rpi-sdimg-ota ${DEPLOY_DIR_IMAGE}/${IMAGE_LINK_NAME}.rootfs.rpi-sdimg-ota
-}
-
-ROOTFS_POSTPROCESS_COMMAND += " rpi_generate_sysctl_config ; "
-
-rpi_generate_sysctl_config() {
-	# systemd sysctl config
-	test -d ${IMAGE_ROOTFS}${sysconfdir}/sysctl.d && \
-		echo "vm.min_free_kbytes = 8192" > ${IMAGE_ROOTFS}${sysconfdir}/sysctl.d/rpi-vm.conf
-
-	# sysv sysctl config
-	IMAGE_SYSCTL_CONF="${IMAGE_ROOTFS}${sysconfdir}/sysctl.conf"
-	test -e ${IMAGE_ROOTFS}${sysconfdir}/sysctl.conf && \
-		sed -e "/vm.min_free_kbytes/d" -i ${IMAGE_SYSCTL_CONF}
-	echo "" >> ${IMAGE_SYSCTL_CONF} && echo "vm.min_free_kbytes = 8192" >> ${IMAGE_SYSCTL_CONF}
-}