OSTree-enabled image for raspberry Pi

Bug-AGL: SPEC-254

v2 [jsmoeller]: change rpi fdt addr to 200M (fix cma),
                re-add inherit gobject-introspection (!)

v3 [oytis]:     move boot logic to editable uEnv.txt

Change-Id: Ic54aadc8377ed1e2a8f2f4ab87db2a7a6660cd15
Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>

1 files changed, 191 insertions, 0 deletions

diff --git a/meta-sota/classes/sdcard_image-rpi-ota.bbclass b/meta-sota/classes/sdcard_image-rpi-ota.bbclass
new file mode 100644
index 0000000..12c1f40
--- /dev/null
+++ b/meta-sota/classes/sdcard_image-rpi-ota.bbclass
@@ -0,0 +1,191 @@
+inherit image_types
+inherit linux-raspberrypi-base
+
+#
+# Create an image that can by written onto a SD card using dd.
+#
+# The disk layout used is:
+#
+#    0                      -> IMAGE_ROOTFS_ALIGNMENT         - reserved for other data
+#    IMAGE_ROOTFS_ALIGNMENT -> BOOT_SPACE                     - bootloader and kernel
+#    BOOT_SPACE             -> SDIMG_OTA_SIZE                 - rootfs
+#
+
+#                                                     Default Free space = 1.3x
+#                                                     Use IMAGE_OVERHEAD_FACTOR to add more space
+#                                                     <--------->
+#            4MiB              40MiB           SDIMG_OTA_ROOTFS
+# <-----------------------> <----------> <---------------------->
+#  ------------------------ ------------ ------------------------
+# | IMAGE_ROOTFS_ALIGNMENT | BOOT_SPACE | OTAROOT_SIZE           |
+#  ------------------------ ------------ ------------------------
+# ^                        ^            ^                        ^
+# |                        |            |                        |
+# 0                      4MiB     4MiB + 40MiB       4MiB + 40Mib + SDIMG_OTA_ROOTFS
+
+# This image depends on the rootfs image
+IMAGE_TYPEDEP_rpi-sdimg-ota = "${SDIMG_OTA_ROOTFS_TYPE}"
+
+# Set kernel and boot loader
+IMAGE_BOOTLOADER ?= "bcm2835-bootfiles"
+
+# Set initramfs extension
+KERNEL_INITRAMFS ?= ""
+
+# Kernel image name
+SDIMG_OTA_KERNELIMAGE_raspberrypi  ?= "kernel.img"
+SDIMG_OTA_KERNELIMAGE_raspberrypi2 ?= "kernel7.img"
+
+# Boot partition volume id
+BOOTDD_VOLUME_ID ?= "${MACHINE}"
+
+# Boot partition size [in KiB] (will be rounded up to IMAGE_ROOTFS_ALIGNMENT)
+BOOT_SPACE ?= "40960"
+
+# Set alignment to 4MB [in KiB]
+IMAGE_ROOTFS_ALIGNMENT = "4096"
+
+# Use an uncompressed ext3 by default as rootfs
+SDIMG_OTA_ROOTFS_TYPE ?= "otaimg"
+SDIMG_OTA_ROOTFS = "${DEPLOY_DIR_IMAGE}/${IMAGE_LINK_NAME}.${SDIMG_OTA_ROOTFS_TYPE}"
+
+IMAGE_DEPENDS_rpi-sdimg-ota = " \
+			parted-native \
+			mtools-native \
+			dosfstools-native \
+			virtual/kernel:do_deploy \
+			${IMAGE_BOOTLOADER} \
+			u-boot \
+			"
+IMAGE_TYPEDEP_rpi-sdimg-ota = "otaimg"
+
+# SD card image name
+SDIMG_OTA = "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.rpi-sdimg-ota"
+
+# Compression method to apply to SDIMG_OTA after it has been created. Supported
+# compression formats are "gzip", "bzip2" or "xz". The original .rpi-sdimg-ota file
+# is kept and a new compressed file is created if one of these compression
+# formats is chosen. If SDIMG_OTA_COMPRESSION is set to any other value it is
+# silently ignored.
+#SDIMG_OTA_COMPRESSION ?= ""
+
+# Additional files and/or directories to be copied into the vfat partition from the IMAGE_ROOTFS.
+FATPAYLOAD ?= ""
+
+IMAGEDATESTAMP = "${@time.strftime('%Y.%m.%d',time.gmtime())}"
+IMAGE_CMD_rpi-sdimg-ota[vardepsexclude] += "IMAGEDATESTAMP"
+IMAGE_CMD_rpi-sdimg-ota[vardepsexclude] += "DATETIME"
+
+IMAGE_CMD_rpi-sdimg-ota () {
+
+	# Align partitions
+	OTAROOT_SIZE=`du -Lb ${DEPLOY_DIR_IMAGE}/${IMAGE_LINK_NAME}.${SDIMG_OTA_ROOTFS_TYPE} | cut -f1`
+	OTAROOT_SIZE=$(expr ${OTAROOT_SIZE} / 1024 + 1)
+	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1)
+	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE_ALIGNED} - ${BOOT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT})
+	SDIMG_OTA_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + $OTAROOT_SIZE)
+
+	echo "Creating filesystem with Boot partition ${BOOT_SPACE_ALIGNED} KiB and RootFS $OTAROOT_SIZE KiB"
+
+	# Check if we are building with device tree support
+	DTS="${@get_dts(d, None)}"
+
+	# Initialize sdcard image file
+	dd if=/dev/zero of=${SDIMG_OTA} bs=1024 count=0 seek=${SDIMG_OTA_SIZE}
+
+	# Create partition table
+	parted -s ${SDIMG_OTA} mklabel msdos
+	# Create boot partition and mark it as bootable
+	parted -s ${SDIMG_OTA} unit KiB mkpart primary fat32 ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT})
+	parted -s ${SDIMG_OTA} set 1 boot on
+	# Create rootfs partition to the end of disk
+	parted -s ${SDIMG_OTA} -- unit KiB mkpart primary ext2 $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT}) -1s
+	parted ${SDIMG_OTA} print
+
+	# Create a vfat image with boot files
+	BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDIMG_OTA} unit b print | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 512 /2 }')
+	rm -f ${WORKDIR}/boot.img
+	mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS
+	sync
+
+	mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/bcm2835-bootfiles/* ::/
+	
+	if test -n "${DTS}"; then
+		# Device Tree Overlays are assumed to be suffixed by '-overlay.dtb' string and will be put in a dedicated folder
+		DT_OVERLAYS="${@split_overlays(d, 0)}"
+		DT_ROOT="${@split_overlays(d, 1)}"
+
+		# Copy board device trees to root folder
+		for DTB in ${DT_ROOT}; do
+			DTB_BASE_NAME=`basename ${DTB} .dtb`
+
+			mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTB_BASE_NAME}.dtb ::${DTB_BASE_NAME}.dtb
+		done
+
+		# Copy device tree overlays to dedicated folder
+		mmd -i ${WORKDIR}/boot.img overlays
+		for DTB in ${DT_OVERLAYS}; do
+			DTB_BASE_NAME=`basename ${DTB} .dtb`
+			mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTB_BASE_NAME}.dtb ::overlays/${DTB_BASE_NAME}.dtbo
+		done
+	fi
+
+	case "${KERNEL_IMAGETYPE}" in
+	"uImage")
+		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/u-boot.bin ::${SDIMG_OTA_KERNELIMAGE}
+		;;
+	*)
+		bbfatal "Kernel uImage is required for OTA image. Please set KERNEL_IMAGETYPE to \"uImage\""
+		;;
+	esac
+
+	if [ -n ${FATPAYLOAD} ] ; then
+		echo "Copying payload into VFAT"
+		for entry in ${FATPAYLOAD} ; do
+				# add the || true to stop aborting on vfat issues like not supporting .~lock files
+				mcopy -i ${WORKDIR}/boot.img -s -v ${IMAGE_ROOTFS}$entry :: || true
+		done
+	fi
+
+	# Add stamp file
+	echo "${IMAGE_NAME}-${IMAGEDATESTAMP}" > ${WORKDIR}/image-version-info
+	mcopy -i ${WORKDIR}/boot.img -v ${WORKDIR}//image-version-info ::
+
+	# Burn Partitions
+	sync
+	dd if=${WORKDIR}/boot.img of=${SDIMG_OTA} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
+	# If SDIMG_OTA_ROOTFS_TYPE is a .xz file use xzcat
+	if echo "${SDIMG_OTA_ROOTFS_TYPE}" | egrep -q "*\.xz"
+	then
+		xzcat ${SDIMG_OTA_ROOTFS} | dd of=${SDIMG_OTA} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
+	else
+		dd if=${SDIMG_OTA_ROOTFS} of=${SDIMG_OTA} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
+	fi
+
+	# Optionally apply compression
+	case "${SDIMG_OTA_COMPRESSION}" in
+	"gzip")
+		gzip -k9 "${SDIMG_OTA}"
+		;;
+	"bzip2")
+		bzip2 -k9 "${SDIMG_OTA}"
+		;;
+	"xz")
+		xz -k "${SDIMG_OTA}"
+		;;
+	esac
+}
+
+ROOTFS_POSTPROCESS_COMMAND += " rpi_generate_sysctl_config ; "
+
+rpi_generate_sysctl_config() {
+	# systemd sysctl config
+	test -d ${IMAGE_ROOTFS}${sysconfdir}/sysctl.d && \
+		echo "vm.min_free_kbytes = 8192" > ${IMAGE_ROOTFS}${sysconfdir}/sysctl.d/rpi-vm.conf
+
+	# sysv sysctl config
+	IMAGE_SYSCTL_CONF="${IMAGE_ROOTFS}${sysconfdir}/sysctl.conf"
+	test -e ${IMAGE_ROOTFS}${sysconfdir}/sysctl.conf && \
+		sed -e "/vm.min_free_kbytes/d" -i ${IMAGE_SYSCTL_CONF}
+	echo "" >> ${IMAGE_SYSCTL_CONF} && echo "vm.min_free_kbytes = 8192" >> ${IMAGE_SYSCTL_CONF}
+}