Wipe out sota-related codeeel_4.99.3eel_4.99.2eel_4.99.1eel/4.99.3eel/4.99.2eel/4.99.1dab_3.99.1dab/3.99.14.99.34.99.24.99.13.99.1

Moved to meta-updater@github.com/advancedtelenmatic

Change-Id: I7c89d373e43a88a89155c72de87c0b4b5238bc52
Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>

11 files changed, 0 insertions, 2057 deletions

diff --git a/meta-sota/scripts/lib/wic/canned-wks/sdimage-sota.wks b/meta-sota/scripts/lib/wic/canned-wks/sdimage-sota.wks
deleted file mode 100644
index c31c3a5..0000000
--- a/meta-sota/scripts/lib/wic/canned-wks/sdimage-sota.wks
+++ /dev/null
@@ -1,7 +0,0 @@
-# short-description: Create OTA-enabled SD card image
-# long-description: Creates a partitioned SD card image with OSTree
-# physical sysroot as a payload. Boot files are located in the
-# first vfat partition.
-
-part /boot --source bootimg-partition --ondisk mmcblk --fstype=vfat --label boot --active --align 4096 --size 20
-part / --source otaimage --ondisk mmcblk --fstype=ext4 --label root --align 4096
diff --git a/meta-sota/scripts/lib/wic/plugins/source/otaimage.py b/meta-sota/scripts/lib/wic/plugins/source/otaimage.py
deleted file mode 100644
index 4ef3b69..0000000
--- a/meta-sota/scripts/lib/wic/plugins/source/otaimage.py
+++ /dev/null
@@ -1,68 +0,0 @@
-# ex:ts=4:sw=4:sts=4:et
-# -*- tab-width: 4; c-basic-offset: 4; indent-tabs-mode: nil -*-
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-
-import os
-
-from wic import msger
-from wic.pluginbase import SourcePlugin
-from wic.utils.oe.misc import get_bitbake_var
-
-class OTAImagePlugin(SourcePlugin):
-    """
-    Add an already existing filesystem image to the partition layout.
-    """
-
-    name = 'otaimage'
-
-    @classmethod
-    def do_install_disk(cls, disk, disk_name, cr, workdir, oe_builddir,
-                        bootimg_dir, kernel_dir, native_sysroot):
-        """
-        Called after all partitions have been prepared and assembled into a
-        disk image. Do nothing.
-        """
-        pass
-
-    @classmethod
-    def do_configure_partition(cls, part, source_params, cr, cr_workdir,
-                               oe_builddir, bootimg_dir, kernel_dir,
-                               native_sysroot):
-        """
-        Called before do_prepare_partition(). Possibly prepare
-        configuration files of some sort.
-        """
-        pass
-
-    @classmethod
-    def do_prepare_partition(cls, part, source_params, cr, cr_workdir,
-                             oe_builddir, bootimg_dir, kernel_dir,
-                             rootfs_dir, native_sysroot):
-        """
-        Called to do the actual content population for a partition i.e. it
-        'prepares' the partition to be incorporated into the image.
-        """
-        if not bootimg_dir:
-            bootimg_dir = get_bitbake_var("DEPLOY_DIR_IMAGE")
-            if not bootimg_dir:
-                msger.error("Couldn't find DEPLOY_DIR_IMAGE, exiting\n")
-
-        msger.debug('Bootimg dir: %s' % bootimg_dir)
-
-        src = bootimg_dir + "/" + get_bitbake_var("IMAGE_LINK_NAME") + ".otaimg"
-
-        msger.debug('Preparing partition using image %s' % (src))
-        part.prepare_rootfs_from_fs_image(cr_workdir, src, "")
diff --git a/meta-sota/scripts/runqemu b/meta-sota/scripts/runqemu
deleted file mode 100755
index b6c9b54..0000000
--- a/meta-sota/scripts/runqemu
+++ /dev/null
@@ -1,575 +0,0 @@
-#!/bin/bash
-#
-# Handle running OE images standalone with QEMU
-#
-# Copyright (C) 2006-2011 Linux Foundation
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-usage() {
-    MYNAME=`basename $0`
-cat <<_EOF
-
-Usage: you can run this script with any valid combination
-of the following environment variables (in any order):
-  KERNEL - the kernel image file to use
-  ROOTFS - the rootfs image file or nfsroot directory to use
-  MACHINE - the machine name (optional, autodetected from KERNEL filename if unspecified)
-  Simplified QEMU command-line options can be passed with:
-    nographic - disables video console
-    serial - enables a serial console on /dev/ttyS0
-    kvm - enables KVM when running qemux86/qemux86-64 (VT-capable CPU required)
-    kvm-vhost - enables KVM with vhost support when running qemux86/qemux86-64 (VT-capable CPU required)
-    publicvnc - enable a VNC server open to all hosts
-  qemuparams="xyz" - specify custom parameters to QEMU
-  bootparams="xyz" - specify custom kernel parameters during boot
-
-Examples:
-  $MYNAME qemuarm
-  $MYNAME qemux86-64 core-image-sato ext4
-  $MYNAME qemux86-64 wic-image-minimal wic
-  $MYNAME path/to/bzImage-qemux86.bin path/to/nfsrootdir/ serial
-  $MYNAME qemux86 iso/hddimg/vmdk/qcow2/vdi/ramfs/cpio.gz...
-  $MYNAME qemux86 qemuparams="-m 256"
-  $MYNAME qemux86 bootparams="psplash=false"
-  $MYNAME path/to/<image>-<machine>.vmdk
-  $MYNAME path/to/<image>-<machine>.wic
-_EOF
-    exit 1
-}
-
-if [ "x$1" = "x" ]; then
-    usage
-fi
-
-error() {
-    echo "Error: "$*
-    usage
-}
-
-MACHINE=${MACHINE:=""}
-KERNEL=${KERNEL:=""}
-ROOTFS=${ROOTFS:=""}
-FSTYPE=${FSTYPE:=""}
-LAZY_ROOTFS=""
-SCRIPT_QEMU_OPT=""
-SCRIPT_QEMU_EXTRA_OPT=""
-SCRIPT_KERNEL_OPT=""
-SERIALSTDIO=""
-TCPSERIAL_PORTNUM=""
-KVM_ENABLED="no"
-KVM_ACTIVE="no"
-VHOST_ENABLED="no"
-VHOST_ACTIVE="no"
-IS_VM="false"
-
-# Determine whether the file is a kernel or QEMU image, and set the
-# appropriate variables
-process_filename() {
-    filename=$1
-
-    # Extract the filename extension
-    EXT=`echo $filename | awk -F . '{ print \$NF }'`
-    case /$EXT/ in
-	/bin/)
-		# A file ending in .bin is a kernel
-		[ -z "$KERNEL" ] && KERNEL=$filename || \
-		    error "conflicting KERNEL args [$KERNEL] and [$filename]"
-		;;
-	/ext[234]/|/jffs2/|/btrfs/)
-		# A file ending in a supportted fs type is a rootfs image
-		if [ -z "$FSTYPE" -o "$FSTYPE" = "$EXT" ]; then
-		    FSTYPE=$EXT
-		    ROOTFS=$filename
-		else
-		    error "conflicting FSTYPE types [$FSTYPE] and [$EXT]"
-		fi
-		;;
-	/hddimg/|/hdddirect/|/vmdk/|/wic/|/qcow2/|/vdi/|/otaimg/)
-		FSTYPE=$EXT
-		VM=$filename
-		ROOTFS=$filename
-		IS_VM="true"
-		;;
-	*)
-		error "unknown file arg [$filename]"
-		;;
-    esac
-}
-
-check_fstype_conflicts() {
-    if [ -z "$FSTYPE" -o "$FSTYPE" = "$1" ]; then
-        FSTYPE=$1
-    else
-        error "conflicting FSTYPE types [$FSTYPE] and [$1]"
-    fi
-}
-# Parse command line args without requiring specific ordering. It's a
-# bit more complex, but offers a great user experience.
-while true; do
-    arg=${1}
-    case "$arg" in
-        "qemux86" | "qemux86-64" | "qemuarm" | "qemuarm64" | "qemumips" | "qemumipsel" | \
-        "qemumips64" | "qemush4"  | "qemuppc" | "qemumicroblaze" | "qemuzynq" | "qemuzynqmp")
-            [ -z "$MACHINE" -o "$MACHINE" = "$arg" ] && MACHINE=$arg || \
-                error "conflicting MACHINE types [$MACHINE] and [$arg]"
-            ;;
-        "ext"[234] | "jffs2" | "nfs" | "btrfs")
-            check_fstype_conflicts $arg
-            ;;
-        "hddimg" | "hdddirect" | "wic" | "vmdk" | "qcow2" | "vdi" | "iso" | "otaimg")
-            check_fstype_conflicts $arg
-            IS_VM="true"
-            ;;
-        "ramfs" | "cpio.gz")
-            FSTYPE=cpio.gz
-            ;;
-        "nographic")
-            SCRIPT_QEMU_OPT="$SCRIPT_QEMU_OPT -nographic"
-            SCRIPT_KERNEL_OPT="$SCRIPT_KERNEL_OPT console=ttyS0"
-            ;;
-        "serial")
-            SCRIPT_QEMU_OPT="$SCRIPT_QEMU_OPT -serial stdio"
-            SCRIPT_KERNEL_OPT="$SCRIPT_KERNEL_OPT console=ttyS0"
-            SERIALSTDIO="1"
-            ;;
-        "tcpserial="*)
-            TCPSERIAL_PORTNUM=${arg##tcpserial=}
-            ;;
-        "biosdir="*)
-            CUSTOMBIOSDIR="${arg##biosdir=}"
-	    ;;
-        "biosfilename="*)
-            SCRIPT_QEMU_OPT="$SCRIPT_QEMU_OPT -bios ${arg##biosfilename=}"
-            ;;
-        "qemuparams="*)
-            SCRIPT_QEMU_EXTRA_OPT="${arg##qemuparams=}"
-
-            # Warn user if they try to specify serial or kvm options
-            # to use simplified options instead
-            serial_option=`expr "$SCRIPT_QEMU_EXTRA_OPT" : '.*\(-serial\)'`
-            kvm_option=`expr "$SCRIPT_QEMU_EXTRA_OPT" : '.*\(-enable-kvm\)'`
-            vga_option=`expr "$SCRIPT_QEMU_EXTRA_OPT" : '.*\(-vga\)'`
-            [ ! -z "$serial_option" -o ! -z "$kvm_option" ] && \
-                echo "Please use simplified serial or kvm options instead"
-            ;;
-        "bootparams="*)
-            SCRIPT_KERNEL_OPT="$SCRIPT_KERNEL_OPT ${arg##bootparams=}"
-            ;;
-        "audio")
-            if [ "x$MACHINE" = "xqemux86" -o "x$MACHINE" = "xqemux86-64" ]; then
-                echo "Enabling audio in qemu."
-                echo "Please install snd_intel8x0 or snd_ens1370 driver in linux guest."
-                QEMU_AUDIO_DRV="alsa"
-                SCRIPT_QEMU_OPT="$SCRIPT_QEMU_OPT -soundhw ac97,es1370"
-            fi
-            ;;
-        "kvm")
-            KVM_ENABLED="yes"
-            KVM_CAPABLE=`grep -q 'vmx\|svm' /proc/cpuinfo && echo 1`
-            ;;
-        "kvm-vhost")
-            KVM_ENABLED="yes"
-            KVM_CAPABLE=`grep -q 'vmx\|svm' /proc/cpuinfo && echo 1`
-            VHOST_ENABLED="yes"
-            ;;
-        "slirp")
-            SLIRP_ENABLED="yes"
-            ;;
-        "publicvnc")
-            SCRIPT_QEMU_OPT="$SCRIPT_QEMU_OPT -vnc :0"
-            ;;
-        *-image*)
-            [ -z "$ROOTFS" ] || \
-        		error "conflicting ROOTFS args [$ROOTFS] and [$arg]"
-            if [ -f "$arg" ]; then
-                process_filename $arg
-            elif [ -d "$arg" ]; then
-                # Handle the case where the nfsroot dir has -image-
-                # in the pathname
-                echo "Assuming $arg is an nfs rootfs"
-                FSTYPE=nfs
-                ROOTFS=$arg
-            else
-                ROOTFS=$arg
-                LAZY_ROOTFS="true"
-            fi
-            ;;
-        "") break ;;
-        *)
-            # A directory name is an nfs rootfs
-            if [ -d "$arg" ]; then
-                echo "Assuming $arg is an nfs rootfs"
-                if [ -z "$FSTYPE" -o "$FSTYPE" = "nfs" ]; then
-                    FSTYPE=nfs
-                else
-                    error "conflicting FSTYPE types [$arg] and nfs"
-                fi
-
-                if [ -z "$ROOTFS" ]; then
-                    ROOTFS=$arg
-                else
-                    error "conflicting ROOTFS args [$ROOTFS] and [$arg]"
-                fi
-            elif [ -f "$arg" ]; then
-                process_filename $arg
-            else
-                error "unable to classify arg [$arg]"
-            fi
-            ;;
-    esac
-    shift
-done
-
-if [ ! -c /dev/net/tun ] ; then
-	echo "TUN control device /dev/net/tun is unavailable; you may need to enable TUN (e.g. sudo modprobe tun)"
-	exit 1
-elif [ ! -w /dev/net/tun ] ; then
-	echo "TUN control device /dev/net/tun is not writable, please fix (e.g. sudo chmod 666 /dev/net/tun)"
-	exit 1
-fi
-
-# Report errors for missing combinations of options
-if [ -z "$MACHINE" -a -z "$KERNEL" -a -z "$VM" -a "$FSTYPE" != "wic" ]; then
-    error "you must specify at least a MACHINE or KERNEL argument"
-fi
-if [ "$FSTYPE" = "nfs" -a -z "$ROOTFS" ]; then
-    error "NFS booting without an explicit ROOTFS path is not yet supported"
-fi
-
-if [ -z "$MACHINE" ]; then
-    if [ "$IS_VM" = "true" ]; then
-        [ "x$FSTYPE" = "xwic" ] && filename=$ROOTFS || filename=$VM
-        MACHINE=`basename $filename | sed -n 's/.*\(qemux86-64\|qemux86\|qemuarm64\|qemuarm\|qemumips64\|qemumips\|qemuppc\|qemush4\).*/\1/p'`
-        if [ -z "$MACHINE" ]; then
-            error "Unable to set MACHINE from image filename [$VM]"
-        fi
-        echo "Set MACHINE to [$MACHINE] based on image [$VM]"
-    else
-        MACHINE=`basename $KERNEL | sed -n 's/.*\(qemux86-64\|qemux86\|qemuarm64\|qemuarm\|qemumips64\|qemumips\|qemuppc\|qemush4\).*/\1/p'`
-        if [ -z "$MACHINE" ]; then
-            error "Unable to set MACHINE from kernel filename [$KERNEL]"
-        fi
-        echo "Set MACHINE to [$MACHINE] based on kernel [$KERNEL]"
-    fi
-fi
-
-YOCTO_KVM_WIKI="https://wiki.yoctoproject.org/wiki/How_to_enable_KVM_for_Poky_qemu"
-YOCTO_PARAVIRT_KVM_WIKI="https://wiki.yoctoproject.org/wiki/Running_an_x86_Yocto_Linux_image_under_QEMU_KVM"
-# Detect KVM configuration
-if [ "x$KVM_ENABLED" = "xyes" ]; then
-    if [ -z "$KVM_CAPABLE" ]; then
-        echo "You are trying to enable KVM on a cpu without VT support."
-        echo "Remove kvm from the command-line, or refer"
-        echo "$YOCTO_KVM_WIKI";
-        exit 1;
-    fi
-    if [ "x$MACHINE" != "xqemux86" -a "x$MACHINE" != "xqemux86-64" ]; then
-        echo "KVM only support x86 & x86-64. Remove kvm from the command-line";
-        exit 1;
-    fi
-    if [ ! -e /dev/kvm ]; then
-        echo "Missing KVM device. Have you inserted kvm modules?"
-        echo "For further help see:"
-        echo "$YOCTO_KVM_WIKI";
-        exit 1;
-    fi
-    if [ -w /dev/kvm -a -r /dev/kvm ]; then
-        SCRIPT_QEMU_OPT="$SCRIPT_QEMU_OPT -enable-kvm"
-        KVM_ACTIVE="yes"
-    else
-        echo "You have no rights on /dev/kvm."
-        echo "Please change the ownership of this file as described at:"
-        echo "$YOCTO_KVM_WIKI";
-        exit 1;
-    fi
-    if [ "x$VHOST_ENABLED" = "xyes" ]; then
-        if [ ! -e /dev/vhost-net ]; then
-            echo "Missing virtio net device. Have you inserted vhost-net module?"
-            echo "For further help see:"
-            echo "$YOCTO_PARAVIRT_KVM_WIKI";
-            exit 1;
-        fi
-
-        if [ -w /dev/vhost-net -a -r /dev/vhost-net ]; then
-            VHOST_ACTIVE="yes"
-        else
-            echo "You have no rights on /dev/vhost-net."
-            echo "Please change the ownership of this file as described at:"
-            echo "$YOCTO_KVM_WIKI";
-            exit 1;
-        fi
-    fi
-fi
-
-machine2=`echo $MACHINE | tr 'a-z' 'A-Z' | sed 's/-/_/'`
-# MACHINE is now set for all cases
-
-# Defaults used when these vars need to be inferred
-QEMUX86_DEFAULT_KERNEL=bzImage-qemux86.bin
-QEMUX86_DEFAULT_FSTYPE=ext4
-
-QEMUX86_64_DEFAULT_KERNEL=bzImage-qemux86-64.bin
-QEMUX86_64_DEFAULT_FSTYPE=ext4
-
-QEMUARM_DEFAULT_KERNEL=zImage-qemuarm.bin
-QEMUARM_DEFAULT_FSTYPE=ext4
-
-QEMUARM64_DEFAULT_KERNEL=Image-qemuarm64.bin
-QEMUARM64_DEFAULT_FSTYPE=ext4
-
-QEMUMIPS_DEFAULT_KERNEL=vmlinux-qemumips.bin
-QEMUMIPS_DEFAULT_FSTYPE=ext4
-
-QEMUMIPSEL_DEFAULT_KERNEL=vmlinux-qemumipsel.bin
-QEMUMIPSEL_DEFAULT_FSTYPE=ext4
-
-QEMUMIPS64_DEFAULT_KERNEL=vmlinux-qemumips64.bin
-QEMUMIPS64_DEFAULT_FSTYPE=ext4
-
-QEMUSH4_DEFAULT_KERNEL=vmlinux-qemumips.bin
-QEMUSH4_DEFAULT_FSTYPE=ext4
-
-QEMUPPC_DEFAULT_KERNEL=vmlinux-qemuppc.bin
-QEMUPPC_DEFAULT_FSTYPE=ext4
-
-QEMUMICROBLAZE_DEFAULT_KERNEL=linux.bin.ub
-QEMUMICROBLAZE_DEFAULT_FSTYPE=cpio
-
-QEMUZYNQ_DEFAULT_KERNEL=uImage
-QEMUZYNQ_DEFAULT_FSTYPE=cpio
-
-QEMUZYNQMP_DEFAULT_KERNEL=Image
-QEMUZYNQMP_DEFAULT_FSTYPE=cpio
-
-setup_path_vars() {
-    if [ -z "$OE_TMPDIR" ] ; then
-        PATHS_REQUIRED=true
-    elif [ "$1" = "1" -a -z "$DEPLOY_DIR_IMAGE" ] ; then
-        PATHS_REQUIRED=true
-    else
-        PATHS_REQUIRED=false
-    fi
-
-    if [ "$PATHS_REQUIRED" = "true" ]; then
-        # Try to get the variable values from bitbake
-        type -P bitbake &>/dev/null || {
-            echo "In order for this script to dynamically infer paths";
-            echo "to kernels or filesystem images, you either need";
-            echo "bitbake in your PATH or to source oe-init-build-env";
-            echo "before running this script" >&2;
-            exit 1; }
-
-        # We have bitbake in PATH, get the variable values from bitbake
-        BITBAKE_ENV_TMPFILE=`mktemp --tmpdir runqemu.XXXXXXXXXX`
-        if [ "$?" != "0" ] ; then
-            echo "Error: mktemp failed for bitbake environment output"
-            exit 1
-        fi
-
-        MACHINE=$MACHINE bitbake -e > $BITBAKE_ENV_TMPFILE
-        if [ -z "$OE_TMPDIR" ] ; then
-            OE_TMPDIR=`sed -n 's/^TMPDIR=\"\(.*\)\"/\1/p' $BITBAKE_ENV_TMPFILE`
-        fi
-        if [ -z "$DEPLOY_DIR_IMAGE" ] ; then
-            DEPLOY_DIR_IMAGE=`sed -n 's/^DEPLOY_DIR_IMAGE=\"\(.*\)\"/\1/p' $BITBAKE_ENV_TMPFILE`
-        fi
-        if [ -z "$QEMU_DTB" ] ; then
-            QEMU_DTB=`sed -n 's/^QEMU_DTB=\"\(.*\)\"/\1/p' $BITBAKE_ENV_TMPFILE`
-        fi
-        if [ -z "$OE_TMPDIR" ]; then
-            # Check for errors from bitbake that the user needs to know about
-            BITBAKE_OUTPUT=`cat $BITBAKE_ENV_TMPFILE | wc -l`
-            if [ "$BITBAKE_OUTPUT" -eq "0" ]; then
-                echo "Error: this script needs to be run from your build directory, or you need"
-                echo "to explicitly set OE_TMPDIR and DEPLOY_DIR_IMAGE in your environment"
-            else
-                echo "There was an error running bitbake to determine TMPDIR"
-                echo "Here is the output from 'bitbake -e':"
-                cat $BITBAKE_ENV_TMPFILE
-            fi
-            rm $BITBAKE_ENV_TMPFILE
-            exit 1
-        fi
-        rm $BITBAKE_ENV_TMPFILE
-    fi
-}
-
-setup_sysroot() {
-    # Toolchain installs set up $OECORE_NATIVE_SYSROOT in their
-    # environment script. If that variable isn't set, we're
-    # either in an in-tree build scenario or the environment
-    # script wasn't source'd.
-    if [ -z "$OECORE_NATIVE_SYSROOT" ]; then
-        setup_path_vars
-        BUILD_ARCH=`uname -m`
-        BUILD_OS=`uname | tr '[A-Z]' '[a-z]'`
-        BUILD_SYS="$BUILD_ARCH-$BUILD_OS"
-
-        OECORE_NATIVE_SYSROOT=$OE_TMPDIR/sysroots/$BUILD_SYS
-    fi 
-
-    # Some recipes store the BIOS under $OE_TMPDIR/sysroots/$MACHINE,
-    # now defined as OECORE_MACHINE_SYSROOT. The latter is used when searching
-    # BIOS, VGA BIOS and keymaps.
-    if [ -z "$OECORE_MACHINE_SYSROOT" ]; then
-        OECORE_MACHINE_SYSROOT=$OE_TMPDIR/sysroots/$MACHINE
-    fi
-}
-
-# Locate a rootfs image to boot which matches our expected
-# machine and fstype. 
-findimage() {
-    where=$1
-    machine=$2
-    extension=$3
-
-    # Sort rootfs candidates by modification time - the most
-    # recently created one is the one we most likely want to boot.
-    filename=`ls -t1 $where/*-image*$machine.$extension 2>/dev/null | head -n1`
-    if [ "x$filename" != "x" ]; then
-        ROOTFS=$filename
-        return
-    fi
-
-    echo "Couldn't find a $machine rootfs image in $where."
-    exit 1
-}
-
-# Bios is necessary when using otaimg, look for it
-if [ "$FSTYPE" = "otaimg" ]; then
-    setup_path_vars 1
-    bios_option=`expr "$SCRIPT_QEMU_OPT" : '.*\(-bios\)'`
-    echo "bios_option: $bios_option"
-    if [ -z $bios_option ]; then
-        echo "LOOK FOR BIOS at ${DEPLOY_DIR_IMAGE}"
-        # if -bios wasn't specified explicitly, try to look at the default location
-        if [ -e "${DEPLOY_DIR_IMAGE}/u-boot.rom" ]; then
-            SCRIPT_QEMU_OPT="$SCRIPT_QEMU_OPT -bios ${DEPLOY_DIR_IMAGE}/u-boot.rom"
-        else
-            error "OTA image requires specifying u-boot as BIOS"
-        fi
-    fi
-fi
-
-
-# Kernel command line is stored in compressed format as u-boot environment
-#   which breaks determining drive interface with grep in runqemu-internal
-if [ "$FSTYPE" = "otaimg" ]; then
-    FORCE_DRIVE_IF="ide"
-fi
-
-if [ -e "$ROOTFS" -a -z "$FSTYPE" ]; then
-    # Extract the filename extension
-    EXT=`echo $ROOTFS | awk -F . '{ print \$NF }'`
-    if [ "x$EXT" = "xext2" -o "x$EXT" = "xext3" -o \
-          "x$EXT" = "xjffs2" -o "x$EXT" = "xbtrfs" -o \
-          "x$EXT" = "xext4" ]; then
-        FSTYPE=$EXT
-    else
-        echo "Note: Unable to determine filesystem extension for $ROOTFS"
-        echo "We will use the default FSTYPE for $MACHINE"
-        # ...which is done further below...
-    fi
-fi
-
-if [ -z "$KERNEL" -a "$IS_VM" = "false" ]; then \
-    setup_path_vars 1
-    eval kernel_file=\$${machine2}_DEFAULT_KERNEL
-    KERNEL=$DEPLOY_DIR_IMAGE/$kernel_file
-
-    if [ -z "$KERNEL" ]; then
-        error "Unable to determine default kernel for MACHINE [$MACHINE]"
-    fi
-fi
-# KERNEL is now set for all cases
-
-if [ -z "$FSTYPE" ]; then
-    eval FSTYPE=\$${machine2}_DEFAULT_FSTYPE
-
-    if [ -z "$FSTYPE" ]; then
-        error "Unable to determine default fstype for MACHINE [$MACHINE]"
-    fi
-fi
-
-# FSTYPE is now set for all cases
-
-# Handle cases where a ROOTFS type is given instead of a filename, e.g.
-# core-image-sato
-if [ "$LAZY_ROOTFS" = "true" ]; then
-    setup_path_vars 1
-    echo "Assuming $ROOTFS really means $DEPLOY_DIR_IMAGE/$ROOTFS-$MACHINE.$FSTYPE"
-    if [ "$IS_VM" = "true" ]; then
-        VM=$DEPLOY_DIR_IMAGE/$ROOTFS-$MACHINE.$FSTYPE
-    else
-        ROOTFS=$DEPLOY_DIR_IMAGE/$ROOTFS-$MACHINE.$FSTYPE
-    fi
-fi
-
-if [ -z "$ROOTFS" ]; then
-    setup_path_vars 1
-    T=$DEPLOY_DIR_IMAGE
-    eval rootfs_list=\$${machine2}_DEFAULT_ROOTFS
-    findimage $T $MACHINE $FSTYPE
-
-    if [ -z "$ROOTFS" ]; then
-        error "Unable to determine default rootfs for MACHINE [$MACHINE]"
-    elif [ "$IS_VM" = "true" ]; then
-		VM=$ROOTFS
-    fi
-fi
-# ROOTFS is now set for all cases, now expand it to be an absolute path, it should exist at this point
-
-ROOTFS=`readlink -f $ROOTFS`
-
-echo ""
-echo "Continuing with the following parameters:"
-if [ "$IS_VM" = "false" ]; then
-    echo "KERNEL: [$KERNEL]"
-    echo "ROOTFS: [$ROOTFS]"
-else
-    echo "VM:   [$VM]"
-fi
-echo "FSTYPE: [$FSTYPE]"
-
-setup_sysroot
-# OECORE_NATIVE_SYSROOT and OECORE_MACHINE_SYSROOT are now set for all cases
-
-INTERNAL_SCRIPT="$0-internal"
-if [ ! -f "$INTERNAL_SCRIPT" -o ! -r "$INTERNAL_SCRIPT" ]; then
-INTERNAL_SCRIPT=`which runqemu-internal`
-fi
-
-# Specify directory for BIOS, VGA BIOS and keymaps
-if [ ! -z "$CUSTOMBIOSDIR" ]; then
-    if [ -d "$OECORE_NATIVE_SYSROOT/$CUSTOMBIOSDIR" ]; then
-        echo "Assuming biosdir is $OECORE_NATIVE_SYSROOT/$CUSTOMBIOSDIR"
-        SCRIPT_QEMU_OPT="$SCRIPT_QEMU_OPT -L $OECORE_NATIVE_SYSROOT/$CUSTOMBIOSDIR"
-    elif [ -d "$OECORE_MACHINE_SYSROOT/$CUSTOMBIOSDIR" ]; then
-        echo "Assuming biosdir is $OECORE_MACHINE_SYSROOT/$CUSTOMBIOSDIR"
-        SCRIPT_QEMU_OPT="$SCRIPT_QEMU_OPT -L $OECORE_MACHINE_SYSROOT/$CUSTOMBIOSDIR"
-    else
-        if [ ! -d "$CUSTOMBIOSDIR" ]; then
-            echo "Custom BIOS directory not found. Tried: $CUSTOMBIOSDIR"
-            echo "and $OECORE_NATIVE_SYSROOT/$CUSTOMBIOSDIR"
-            echo "and $OECORE_MACHINE_SYSROOT/$CUSTOMBIOSDIR"
-            exit 1;
-        fi
-        echo "Assuming biosdir is $CUSTOMBIOSDIR"
-        SCRIPT_QEMU_OPT="$SCRIPT_QEMU_OPT -L $CUSTOMBIOSDIR"
-    fi
-fi
-
-. $INTERNAL_SCRIPT
-exit $?
diff --git a/meta-sota/scripts/runqemu-addptable2image b/meta-sota/scripts/runqemu-addptable2image
deleted file mode 100755
index f0195ad..0000000
--- a/meta-sota/scripts/runqemu-addptable2image
+++ /dev/null
@@ -1,51 +0,0 @@
-#!/bin/sh
-
-# Add a partion table to an ext2 image file
-#
-# Copyright (C) 2006-2007 OpenedHand Ltd.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-
-
-IMAGE=$1
-IMAGEOUT=$2
-
-echo $IMAGE
-echo $IMAGEOUT
-
-size=`ls -l $IMAGE | awk '{ print $5}'`
-size2=`expr $size / 512 / 16 / 63`
-
-echo $size
-echo $size2
-
-# MBR Size = 512 * 63 bytes
-dd if=/dev/zero of=$IMAGEOUT count=63
-
-echo "x" > /tmp/fdisk.cmds
-echo "c" >> /tmp/fdisk.cmds
-echo "1024" >> /tmp/fdisk.cmds
-echo "h" >> /tmp/fdisk.cmds
-echo "16" >> /tmp/fdisk.cmds
-echo "r" >> /tmp/fdisk.cmds
-echo "n" >> /tmp/fdisk.cmds
-echo "p" >> /tmp/fdisk.cmds
-echo "1" >> /tmp/fdisk.cmds
-echo "1" >> /tmp/fdisk.cmds
-echo "$size2" >> /tmp/fdisk.cmds
-echo "w" >> /tmp/fdisk.cmds
-
-/sbin/fdisk $IMAGEOUT < /tmp/fdisk.cmds
-cat $IMAGE >> $IMAGEOUT
diff --git a/meta-sota/scripts/runqemu-export-rootfs b/meta-sota/scripts/runqemu-export-rootfs
deleted file mode 100755
index 3dee131..0000000
--- a/meta-sota/scripts/runqemu-export-rootfs
+++ /dev/null
@@ -1,163 +0,0 @@
-#!/bin/bash
-#
-# Copyright (c) 2005-2009 Wind River Systems, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-usage() {
-	echo "Usage: $0 {start|stop|restart} <nfs-export-dir>"
-}
-
-if [ $# != 2 ]; then
-	usage
-	exit 1
-fi
-
-if [[ "$1" != "start" && "$1" != "stop" && "$1" != "restart" ]]; then
-	echo "Unknown command '$1'"
-	usage
-	exit 1
-fi
-
-if [ ! -d "$2" ]; then
-	echo "Error: '$2' does not exist"
-	usage
-	exit 1
-fi
-# Ensure the nfs-export-dir is an absolute path
-NFS_EXPORT_DIR=$(cd "$2" && pwd)
-
-SYSROOT_SETUP_SCRIPT=`which oe-find-native-sysroot 2> /dev/null`
-if [ -z "$SYSROOT_SETUP_SCRIPT" ]; then
-	echo "Error: Unable to find the oe-find-native-sysroot script"
-	echo "Did you forget to source your build environment setup script?"
-	exit 1
-fi
-. $SYSROOT_SETUP_SCRIPT
-
-if [ ! -e "$OECORE_NATIVE_SYSROOT/usr/bin/unfsd" ]; then
-	echo "Error: Unable to find unfsd binary in $OECORE_NATIVE_SYSROOT/usr/bin/"
-
-	if [ "x$OECORE_DISTRO_VERSION" = "x" ]; then
-		echo "Have you run 'bitbake meta-ide-support'?"
-	else
-		echo "This shouldn't happen - something is missing from your toolchain installation"
-	fi
-	exit 1
-fi
-
-if [ ! -d ~/.runqemu-sdk ]; then
-	mkdir -p ~/.runqemu-sdk
-fi
-
-NFS_INSTANCE=${NFS_INSTANCE:=0}
-EXPORTS=~/.runqemu-sdk/exports$NFS_INSTANCE
-RMTAB=~/.runqemu-sdk/rmtab$NFS_INSTANCE
-NFSPID=~/.runqemu-sdk/nfs$NFS_INSTANCE.pid
-MOUNTPID=~/.runqemu-sdk/mount$NFS_INSTANCE.pid
-
-PSEUDO_OPTS="-P $OECORE_NATIVE_SYSROOT/usr"
-PSEUDO_LOCALSTATEDIR="$NFS_EXPORT_DIR/../$(basename $NFS_EXPORT_DIR).pseudo_state"
-export PSEUDO_LOCALSTATEDIR
-
-if [ ! -d "$PSEUDO_LOCALSTATEDIR" ]; then
-	echo "Error: $PSEUDO_LOCALSTATEDIR does not exist."
-	echo "Did you create the export directory using runqemu-extract-sdk?"
-	exit 1	
-fi
-
-# rpc.mountd RPC port
-NFS_MOUNTPROG=$[ 21111 + $NFS_INSTANCE ]
-# rpc.nfsd RPC port
-NFS_NFSPROG=$[ 11111 + $NFS_INSTANCE ]
-# NFS port number
-NFS_PORT=$[ 3049 + 2 * $NFS_INSTANCE ]
-# mountd port number
-MOUNT_PORT=$[ 3048 + 2 * $NFS_INSTANCE ]
-
-## For debugging you would additionally add
-## --debug all
-UNFSD_OPTS="-p -N -i $NFSPID -e $EXPORTS -x $NFS_NFSPROG -n $NFS_PORT -y $NFS_MOUNTPROG -m $MOUNT_PORT"
-
-# Setup the exports file
-if [ "$1" = "start" ]; then
-	echo "Creating exports file..."
-	echo "$NFS_EXPORT_DIR (rw,async,no_root_squash,no_all_squash,insecure)" > $EXPORTS
-fi
-
-# See how we were called.
-case "$1" in
-  start)
-	PORTMAP_RUNNING=`ps -ef | grep portmap | grep -v grep`
-	RPCBIND_RUNNING=`ps -ef | grep rpcbind | grep -v grep`
-	if [[ "x$PORTMAP_RUNNING" = "x" && "x$RPCBIND_RUNNING" = "x" ]]; then
-		echo "======================================================="
-		echo "Error: neither rpcbind nor portmap appear to be running"
-		echo "Please install and start one of these services first"
-		echo "======================================================="
-		echo "Tip: for recent Ubuntu hosts, run:"
-		echo "  sudo apt-get install rpcbind"
-		echo "Then add OPTIONS=\"-i -w\"  to /etc/default/rpcbind and run"
-		echo "  sudo service portmap restart"
-
-		exit 1
-	fi
-
-	echo "Starting User Mode nfsd"
-	echo "  $PSEUDO $PSEUDO_OPTS $OECORE_NATIVE_SYSROOT/usr/bin/unfsd $UNFSD_OPTS"
-	$PSEUDO $PSEUDO_OPTS $OECORE_NATIVE_SYSROOT/usr/bin/unfsd $UNFSD_OPTS
-	if [ ! $? = 0 ]; then
-		echo "Error starting nfsd"
-		exit 1
-	fi
-	# Check to make sure everything started ok.
-	if [ ! -f $NFSPID ]; then
-		echo "rpc.nfsd did not start correctly"
-		exit 1
-	fi
-	ps -fp `cat $NFSPID` > /dev/null 2> /dev/null
-	if [ ! $? = 0 ]; then
-		echo "rpc.nfsd did not start correctly"
-		exit 1
-	fi
-	echo " "
-	echo "On your target please remember to add the following options for NFS"
-	echo "nfsroot=IP_ADDRESS:$NFS_EXPORT_DIR,nfsvers=3,port=$NFSD_PORT,mountprog=$MOUNTD_RPCPORT,nfsprog=$NFSD_RPCPORT,udp,mountport=$MOUNTD_PORT"
-	;;
-  stop)
-	if [ -f "$NFSPID" ]; then
-		echo "Stopping rpc.nfsd"
-		kill `cat $NFSPID`
-		rm -f $NFSPID
-	else
-		echo "No PID file, not stopping rpc.nfsd"
-	fi
-	if [ -f "$EXPORTS" ]; then
-		echo "Removing exports file"
-		rm -f $EXPORTS
-	fi
-	;;
-  restart)
-	$0 stop $NFS_EXPORT_DIR
-	$0 start $NFS_EXPORT_DIR 
-	if [ ! $? = 0 ]; then
-		exit 1
-	fi
-	;;
-  *)
-	echo "$0 {start|stop|restart} <nfs-export-dir>"
-	;;
-esac
-
-exit 0
diff --git a/meta-sota/scripts/runqemu-extract-sdk b/meta-sota/scripts/runqemu-extract-sdk
deleted file mode 100755
index 32ddd48..0000000
--- a/meta-sota/scripts/runqemu-extract-sdk
+++ /dev/null
@@ -1,104 +0,0 @@
-#!/bin/bash
-#
-# This utility extracts an SDK image tarball using pseudo, and stores
-# the pseudo database in var/pseudo within the rootfs. If you want to
-# boot QEMU using an nfsroot, you *must* use this script to create the
-# rootfs to ensure it is done correctly with pseudo.
-#
-# Copyright (c) 2010 Intel Corp.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-# See the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-function usage() {
-	echo "Usage: $0 <image-tarball> <extract-dir>"
-}
-
-if [ $# -ne 2 ]; then
-	usage
-	exit 1
-fi
-
-SYSROOT_SETUP_SCRIPT=`which oe-find-native-sysroot 2> /dev/null`
-if [ -z "$SYSROOT_SETUP_SCRIPT" ]; then
-    echo "Error: Unable to find the oe-find-native-sysroot script"
-    echo "Did you forget to source your build system environment setup script?"
-    exit 1
-fi
-. $SYSROOT_SETUP_SCRIPT
-PSEUDO_OPTS="-P $OECORE_NATIVE_SYSROOT/usr"
-
-ROOTFS_TARBALL=$1
-SDK_ROOTFS_DIR=$2
-
-if [ ! -e "$ROOTFS_TARBALL" ]; then
-   	echo "Error: sdk tarball '$ROOTFS_TARBALL' does not exist"
-   	usage
-   	exit 1
-fi
-
-# Convert SDK_ROOTFS_DIR to a full pathname
-if [[ ${SDK_ROOTFS_DIR:0:1} != "/" ]]; then
-	SDK_ROOTFS_DIR=$(readlink -f $(pwd)/$SDK_ROOTFS_DIR)
-fi
-
-TAR_OPTS=""
-if [[ "$ROOTFS_TARBALL" =~ tar\.bz2$ ]]; then
-	TAR_OPTS="--numeric-owner -xjf"
-fi
-if [[ "$ROOTFS_TARBALL" =~ tar\.gz$ ]]; then
-	TAR_OPTS="--numeric-owner -xzf"
-fi
-if [[ "$ROOTFS_TARBALL" =~ \.tar$ ]]; then
-	TAR_OPTS="--numeric-owner -xf"
-fi
-if [ -z "$TAR_OPTS" ]; then
-	echo "Error: Unable to determine sdk tarball format"
-	echo "Accepted types: .tar / .tar.gz / .tar.bz2"
-	exit 1
-fi
-
-if [ ! -d "$SDK_ROOTFS_DIR" ]; then
-	echo "Creating directory $SDK_ROOTFS_DIR"
-	mkdir -p "$SDK_ROOTFS_DIR"
-fi
-
-pseudo_state_dir="$SDK_ROOTFS_DIR/../$(basename "$SDK_ROOTFS_DIR").pseudo_state"
-pseudo_state_dir="$(readlink -f $pseudo_state_dir)"
-
-if [ -e "$pseudo_state_dir" ]; then
-	echo "Error: $pseudo_state_dir already exists!"
-	echo "Please delete the rootfs tree and pseudo directory manually"
-        echo "if this is really what you want."
-	exit 1
-fi
-
-mkdir -p "$pseudo_state_dir"
-touch "$pseudo_state_dir/pseudo.pid"
-PSEUDO_LOCALSTATEDIR="$pseudo_state_dir"
-export PSEUDO_LOCALSTATEDIR
-
-echo "Extracting rootfs tarball using pseudo..."
-echo "$PSEUDO $PSEUDO_OPTS tar -C \"$SDK_ROOTFS_DIR\" $TAR_OPTS \"$ROOTFS_TARBALL\""
-$PSEUDO $PSEUDO_OPTS tar -C "$SDK_ROOTFS_DIR" $TAR_OPTS "$ROOTFS_TARBALL"
-
-DIRCHECK=`ls -l "$SDK_ROOTFS_DIR" | wc -l`
-if [ "$DIRCHECK" -lt 5 ]; then
-	echo "Warning: I don't see many files in $SDK_ROOTFS_DIR"
-	echo "Please double-check the extraction worked as intended"
-	exit 0
-fi
-
-echo "SDK image successfully extracted to $SDK_ROOTFS_DIR"
-
-exit 0
diff --git a/meta-sota/scripts/runqemu-gen-tapdevs b/meta-sota/scripts/runqemu-gen-tapdevs
deleted file mode 100755
index 624deac..0000000
--- a/meta-sota/scripts/runqemu-gen-tapdevs
+++ /dev/null
@@ -1,100 +0,0 @@
-#!/bin/bash
-#
-# Create a "bank" of tap network devices that can be used by the
-# runqemu script. This script needs to be run as root, and will
-# use the tunctl binary from the build system sysroot. Note: many Linux 
-# distros these days still use an older version of tunctl which does not
-# support the group permissions option, hence the need to use the build
-# system provided version.
-#
-# Copyright (C) 2010 Intel Corp.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-usage() {
-	echo "Usage: sudo $0 <uid> <gid> <num> <native-sysroot-basedir>"
-        echo "Where <uid> is the numeric user id the tap devices will be owned by"
-	echo "Where <gid> is the numeric group id the tap devices will be owned by"
-	echo "<num> is the number of tap devices to create (0 to remove all)"
-	echo "<native-sysroot-basedir> is the path to the build system's native sysroot"
-	exit 1
-}
-
-if [ $EUID -ne 0 ]; then
-	echo "Error: This script must be run with root privileges"
-	exit
-fi
-
-if [ $# -ne 4 ]; then
-	echo "Error: Incorrect number of arguments"
-	usage
-fi
-
-TUID=$1
-GID=$2
-COUNT=$3
-SYSROOT=$4
-
-TUNCTL=$SYSROOT/usr/bin/tunctl
-if [[ ! -x "$TUNCTL" || -d "$TUNCTL" ]]; then
-	echo "Error: $TUNCTL is not an executable"
-	usage
-fi
-
-SCRIPT_DIR=`dirname $0`
-RUNQEMU_IFUP="$SCRIPT_DIR/runqemu-ifup"
-if [ ! -x "$RUNQEMU_IFUP" ]; then
-	echo "Error: Unable to find the runqemu-ifup script in $SCRIPT_DIR"
-	exit 1
-fi
-
-IFCONFIG=`which ip 2> /dev/null`
-if [ -z "$IFCONFIG" ]; then
-	# Is it ever anywhere else?
-	IFCONFIG=/sbin/ip
-fi
-if [ ! -x "$IFCONFIG" ]; then
-       echo "$IFCONFIG cannot be executed"
-       exit 1
-fi
-
-# Ensure we start with a clean slate
-for tap in `$IFCONFIG link | grep tap | awk '{ print \$2 }' | sed s/://`; do
-	echo "Note: Destroying pre-existing tap interface $tap..."
-	$TUNCTL -d $tap
-done
-
-echo "Creating $COUNT tap devices for UID: $TUID GID: $GID..."
-for ((index=0; index < $COUNT; index++)); do
-	echo "Creating tap$index"
-	ifup=`$RUNQEMU_IFUP $TUID $GID $SYSROOT 2>&1`
-	if [ $? -ne 0 ]; then
-		echo "Error running tunctl: $ifup"
-		exit 1
-	fi
-done
-
-if [ $COUNT -gt 0 ]; then
-	echo "Note: For systems running NetworkManager, it's recommended"
-	echo "Note: that the tap devices be set as unmanaged in the"
-	echo "Note: NetworkManager.conf file. Add the following lines to"
-	echo "Note: /etc/NetworkManager/NetworkManager.conf"
-	echo "[keyfile]"
-	echo "unmanaged-devices=interface-name:tap*"
-fi
-
-# The runqemu script will check for this file, and if it exists,
-# will use the existing bank of tap devices without creating
-# additional ones via sudo.
-touch /etc/runqemu-nosudo
diff --git a/meta-sota/scripts/runqemu-ifdown b/meta-sota/scripts/runqemu-ifdown
deleted file mode 100755
index 8f66cfa..0000000
--- a/meta-sota/scripts/runqemu-ifdown
+++ /dev/null
@@ -1,66 +0,0 @@
-#!/bin/bash
-#
-# QEMU network configuration script to bring down tap devices. This
-# utility needs to be run as root, and will use the tunctl binary
-# from the native sysroot. 
-#
-# If you find yourself calling this script a lot, you can add the
-# the following to your /etc/sudoers file to be able to run this
-# command without entering your password each time:
-#
-# <my-username> ALL=NOPASSWD: /path/to/runqemu-ifup
-# <my-username> ALL=NOPASSWD: /path/to/runqemu-ifdown
-#
-# Copyright (c) 2006-2011 Linux Foundation
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-usage() {
-	echo "sudo $(basename $0) <tap-dev> <native-sysroot-basedir>"
-}
-
-if [ $EUID -ne 0 ]; then
-	echo "Error: This script (runqemu-ifdown) must be run with root privileges"
-	exit 1
-fi
-
-if [ $# -ne 2 ]; then
-	usage
-	exit 1
-fi
-
-TAP=$1
-NATIVE_SYSROOT_DIR=$2
-
-TUNCTL=$NATIVE_SYSROOT_DIR/usr/bin/tunctl
-if [ ! -e "$TUNCTL" ]; then
-	echo "Error: Unable to find tunctl binary in '$NATIVE_SYSROOT_DIR/usr/bin', please bitbake qemu-helper-native"
-	exit 1
-fi
-
-$TUNCTL -d $TAP
-
-# cleanup the remaining iptables rules
-IPTABLES=`which iptables 2> /dev/null`
-if [ "x$IPTABLES" = "x" ]; then
-	IPTABLES=/sbin/iptables
-fi
-if [ ! -x "$IPTABLES" ]; then
-	echo "$IPTABLES cannot be executed"
-	exit 1
-fi
-n=$[ (`echo $TAP | sed 's/tap//'` * 2) + 1 ]
-dest=$[ (`echo $TAP | sed 's/tap//'` * 2) + 2 ]
-$IPTABLES -D POSTROUTING -t nat -j MASQUERADE -s 192.168.7.$n/32
-$IPTABLES -D POSTROUTING -t nat -j MASQUERADE -s 192.168.7.$dest/32
diff --git a/meta-sota/scripts/runqemu-ifup b/meta-sota/scripts/runqemu-ifup
deleted file mode 100755
index d9bd894..0000000
--- a/meta-sota/scripts/runqemu-ifup
+++ /dev/null
@@ -1,121 +0,0 @@
-#!/bin/bash
-#
-# QEMU network interface configuration script. This utility needs to
-# be run as root, and will use the tunctl binary from a native sysroot.
-# Note: many Linux distros these days still use an older version of
-# tunctl which does not support the group permissions option, hence
-# the need to use build system's version.
-#
-# If you find yourself calling this script a lot, you can add the
-# the following to your /etc/sudoers file to be able to run this
-# command without entering your password each time:
-#
-# <my-username> ALL=NOPASSWD: /path/to/runqemu-ifup
-# <my-username> ALL=NOPASSWD: /path/to/runqemu-ifdown
-#
-# If you'd like to create a bank of tap devices at once, you should use
-# the runqemu-gen-tapdevs script instead. If tap devices are set up using
-# that script, the runqemu script will never end up calling this
-# script.
-#
-# Copyright (c) 2006-2011 Linux Foundation
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-usage() {
-	echo "sudo $(basename $0) <uid> <gid> <native-sysroot-basedir>"
-}
-
-if [ $EUID -ne 0 ]; then
-	echo "Error: This script (runqemu-ifup) must be run with root privileges"
-	exit 1
-fi
-
-if [ $# -ne 3 ]; then
-	usage
-	exit 1
-fi
-
-USERID="-u $1"
-GROUP="-g $2"
-NATIVE_SYSROOT_DIR=$3
-
-TUNCTL=$NATIVE_SYSROOT_DIR/usr/bin/tunctl
-if [ ! -x "$TUNCTL" ]; then
-       echo "Error: Unable to find tunctl binary in '$NATIVE_SYSROOT_DIR/usr/bin', please bitbake qemu-helper-native"
-	exit 1
-fi
-
-TAP=`$TUNCTL -b $GROUP 2>&1`
-STATUS=$?
-if [ $STATUS -ne 0 ]; then
-# If tunctl -g fails, try using tunctl -u, for older host kernels 
-# which do not support the TUNSETGROUP ioctl
-	TAP=`$TUNCTL -b $USERID 2>&1`
-	STATUS=$?
-	if [ $STATUS -ne 0 ]; then
-		echo "tunctl failed:"
-		exit 1
-	fi
-fi
-
-IFCONFIG=`which ip 2> /dev/null`
-if [ "x$IFCONFIG" = "x" ]; then
-	# better than nothing...
-	IFCONFIG=/sbin/ip
-fi
-if [ ! -x "$IFCONFIG" ]; then
-	echo "$IFCONFIG cannot be executed"
-	exit 1
-fi
-
-IPTABLES=`which iptables 2> /dev/null`
-if [ "x$IPTABLES" = "x" ]; then
-	IPTABLES=/sbin/iptables
-fi
-if [ ! -x "$IPTABLES" ]; then
-	echo "$IPTABLES cannot be executed"
-	exit 1
-fi
-
-n=$[ (`echo $TAP | sed 's/tap//'` * 2) + 1 ]
-$IFCONFIG addr add 192.168.7.$n/32 broadcast 192.168.7.255 dev $TAP
-STATUS=$?
-if [ $STATUS -ne 0 ]; then
-    echo "Failed to set up IP addressing on $TAP"
-    exit 1
-fi
-$IFCONFIG link set dev $TAP up
-STATUS=$?
-if [ $STATUS -ne 0 ]; then
-    echo "Failed to bring up $TAP"
-    exit 1
-fi
-
-dest=$[ (`echo $TAP | sed 's/tap//'` * 2) + 2 ]
-$IFCONFIG route add to 192.168.7.$dest dev $TAP
-STATUS=$?
-if [ $STATUS -ne 0 ]; then
-    echo "Failed to add route to 192.168.7.$dest using $TAP"
-    exit 1
-fi
-
-# setup NAT for tap0 interface to have internet access in QEMU
-$IPTABLES -A POSTROUTING -t nat -j MASQUERADE -s 192.168.7.$n/32
-$IPTABLES -A POSTROUTING -t nat -j MASQUERADE -s 192.168.7.$dest/32
-echo 1 > /proc/sys/net/ipv4/ip_forward
-echo 1 > /proc/sys/net/ipv4/conf/$TAP/proxy_arp
-$IPTABLES -P FORWARD ACCEPT
-
-echo $TAP
diff --git a/meta-sota/scripts/runqemu-internal b/meta-sota/scripts/runqemu-internal
deleted file mode 100755
index 9811cf9..0000000
--- a/meta-sota/scripts/runqemu-internal
+++ /dev/null
@@ -1,760 +0,0 @@
-#!/bin/bash -x
-
-# Handle running OE images under qemu
-#
-# Copyright (C) 2006-2011 Linux Foundation
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
-
-# Call setting:
-#   QEMU_MEMORY (optional) - set the amount of memory in the emualted system.
-#   SERIAL_LOGFILE (optional) - log the serial port output to a file
-#
-# Image options:
-#   MACHINE - the machine to run
-#   FSTYPE - the image type to run
-#   KERNEL - the kernel image file to use
-#   ROOTFS - the disk image file to use
-#
-
-mem_size=-1
-
-#Get rid of <> and get the contents of extra qemu running params
-SCRIPT_QEMU_EXTRA_OPT=`echo $SCRIPT_QEMU_EXTRA_OPT | sed -e 's/<//' -e 's/>//'`
-#if user set qemu memory, eg: -m 256 in qemu extra params, we need to do some 
-# validation check
-mem_set=`expr "$SCRIPT_QEMU_EXTRA_OPT" : '.*\(-m[[:space:]] *[0-9]*\)'`
-if [ ! -z "$mem_set" ] ; then
-#Get memory setting size from user input
-  mem_size=`echo $mem_set | sed 's/-m[[:space:]] *//'`
-fi
-
-# This file is created when runqemu-gen-tapdevs creates a bank of tap
-# devices, indicating that the user should not bring up new ones using
-# sudo.
-NOSUDO_FLAG="/etc/runqemu-nosudo"
-
-QEMUIFUP=`which runqemu-ifup 2> /dev/null`
-QEMUIFDOWN=`which runqemu-ifdown 2> /dev/null`
-if [ -z "$QEMUIFUP" -o ! -x "$QEMUIFUP" ]; then
-       echo "runqemu-ifup cannot be found or executed"
-       exit 1
-fi
-if [ -z "$QEMUIFDOWN" -o ! -x "$QEMUIFDOWN" ]; then
-       echo "runqemu-ifdown cannot be found or executed"
-       exit 1
-fi
-
-NFSRUNNING="false"
-
-#capture original stty values
-ORIG_STTY=$(stty -g)
-
-if [ "$SLIRP_ENABLED" = "yes" ]; then
-    KERNEL_NETWORK_CMD="ip=dhcp"
-    QEMU_TAP_CMD=""
-    QEMU_UI_OPTIONS="-show-cursor -usb -usbdevice tablet"
-    QEMU_NETWORK_CMD=""
-    DROOT="/dev/vda"
-    ROOTFS_OPTIONS="-drive file=$ROOTFS,if=virtio,format=raw"
-else
-        acquire_lock() {
-            lockfile=$1
-            if [ -z "$lockfile" ]; then
-                echo "Error: missing lockfile arg passed to acquire_lock()"
-                return 1
-            fi
-
-            touch $lockfile.lock 2>/dev/null
-            if [ $? -ne 0 ]; then
-                echo "Acquiring lockfile for $lockfile.lock failed"
-                return 1
-            fi
-            exec 8>$lockfile.lock
-            flock -n -x 8
-            if [ $? -ne 0 ]; then
-                exec 8>&-
-                return 1
-            fi
-
-            return 0
-        }
-
-        release_lock() {
-            lockfile=$1
-            if [ -z "$lockfile" ]; then
-                echo "Error: missing lockfile arg passed to release_lock()"
-                return 1
-            fi
-
-            rm -f $lockfile.lock
-            exec  8>&-
-        }
-
-        LOCKDIR="/tmp/qemu-tap-locks"
-        if [ ! -d "$LOCKDIR" ]; then
-            mkdir $LOCKDIR
-            chmod 777 $LOCKDIR
-        fi
-
-        IFCONFIG=`which ip 2> /dev/null`
-        if [ -z "$IFCONFIG" ]; then
-            IFCONFIG=/sbin/ip
-        fi
-        if [ ! -x "$IFCONFIG" ]; then
-               echo "$IFCONFIG cannot be executed"
-               exit 1
-        fi
-
-        POSSIBLE=`$IFCONFIG link | grep 'tap' | awk '{print $2}' | sed -e 's/://' -e 's/@.*//'`
-        TAP=""
-        LOCKFILE=""
-        USE_PRECONF_TAP="no"
-        for tap in $POSSIBLE; do
-            LOCKFILE="$LOCKDIR/$tap"
-            if [ -e "$LOCKFILE.skip" ]; then
-                echo "Found $LOCKFILE.skip, skipping $tap"
-                continue
-            fi
-            echo "Acquiring lockfile for $tap..."
-            acquire_lock $LOCKFILE
-            if [ $? -eq 0 ]; then
-                TAP=$tap
-                USE_PRECONF_TAP="yes"
-                break
-            fi
-        done
-
-        if [ "$TAP" = "" ]; then
-            if [ -e "$NOSUDO_FLAG" ]; then
-                echo "Error: There are no available tap devices to use for networking,"
-                echo "and I see $NOSUDO_FLAG exists, so I am not going to try creating"
-                echo "a new one with sudo."
-                exit 1
-            fi
-
-            GROUPID=`id -g`
-            USERID=`id -u`
-            echo "Setting up tap interface under sudo"
-            # Redirect stderr since we could see a LD_PRELOAD warning here if pseudo is loaded
-            # but inactive. This looks scary but is harmless
-            tap=`sudo $QEMUIFUP $USERID $GROUPID $OECORE_NATIVE_SYSROOT 2> /dev/null`
-            if [ $? -ne 0 ]; then
-                # Re-run standalone to see verbose errors
-                sudo $QEMUIFUP $USERID $GROUPID $OECORE_NATIVE_SYSROOT
-                return 1
-            fi
-            LOCKFILE="$LOCKDIR/$tap"
-            echo "Acquiring lockfile for $tap..."
-            acquire_lock $LOCKFILE
-            if [ $? -eq 0 ]; then
-                TAP=$tap
-            fi 
-        else
-            echo "Using preconfigured tap device '$TAP'"
-            echo "If this is not intended, touch $LOCKFILE.skip to make runqemu skip $TAP."
-        fi
-
-        cleanup() {
-            if [ ! -e "$NOSUDO_FLAG" -a "$USE_PRECONF_TAP" = "no" ]; then
-                # Redirect stderr since we could see a LD_PRELOAD warning here if pseudo is loaded
-                # but inactive. This looks scary but is harmless
-                sudo $QEMUIFDOWN $TAP $OECORE_NATIVE_SYSROOT 2> /dev/null
-            fi
-            echo "Releasing lockfile of preconfigured tap device '$TAP'"
-            release_lock $LOCKFILE
-
-            if [ "$NFSRUNNING" = "true" ]; then
-                echo "Shutting down the userspace NFS server..."
-                echo "runqemu-export-rootfs stop $ROOTFS"
-                runqemu-export-rootfs stop $ROOTFS
-            fi
-            # If QEMU crashes or somehow tty properties are not restored
-            # after qemu exits, we need to run stty sane
-            #stty sane
-
-            #instead of using stty sane we set the original stty values
-            stty ${ORIG_STTY}
-
-        }
-
-
-        n0=$(echo $TAP | sed 's/tap//')
-
-        case $n0 in
-            ''|*[!0-9]*)
-                echo "Error Couldn't turn $TAP into an interface number?"
-                exit 1
-                ;;
-        esac
-
-        n1=$(($n0 * 2 + 1))
-        n2=$(($n1 + 1))
-
-        KERNEL_NETWORK_CMD="ip=192.168.7.$n2::192.168.7.$n1:255.255.255.0"
-        QEMU_TAP_CMD="-net tap,vlan=0,ifname=$TAP,script=no,downscript=no"
-        if [ "$VHOST_ACTIVE" = "yes" ]; then
-            QEMU_NETWORK_CMD="-net nic,model=virtio $QEMU_TAP_CMD,vhost=on"
-        else
-            QEMU_NETWORK_CMD="-net nic,model=virtio $QEMU_TAP_CMD"
-        fi
-        DROOT="/dev/vda"
-        ROOTFS_OPTIONS="-drive file=$ROOTFS,if=virtio,format=raw"
-
-        KERNCMDLINE="mem=$QEMU_MEMORY"
-        QEMU_UI_OPTIONS="-show-cursor -usb -usbdevice tablet"
-
-        NFS_INSTANCE=`echo $TAP | sed 's/tap//'`
-        export NFS_INSTANCE
-
-        SERIALOPTS=""
-        if [ "x$SERIAL_LOGFILE" != "x" ]; then
-            SERIALOPTS="-serial file:$SERIAL_LOGFILE"
-        fi
-fi
-
-if [ ! -f "$KERNEL" -a "$IS_VM" = "false" ]; then
-    echo "Error: Kernel image file $KERNEL doesn't exist"
-    cleanup
-    return 1
-fi
-
-if [ "$FSTYPE" != "nfs" -a "$IS_VM" = "false" -a ! -f "$ROOTFS" ]; then
-    echo "Error: Image file $ROOTFS doesn't exist"
-    cleanup
-    return 1
-fi
-
-if [ "$NFS_SERVER" = "" ]; then
-    NFS_SERVER="192.168.7.1"
-    if [ "$SLIRP_ENABLED" = "yes" ]; then
-	NFS_SERVER="10.0.2.2"
-    fi
-fi
-
-if [ "$FSTYPE" = "nfs" ]; then
-    NFS_DIR=`echo $ROOTFS | sed 's/^[^:]*:\(.*\)/\1/'`
-    if [ "$NFS_INSTANCE" = "" ] ; then
-	NFS_INSTANCE=0
-    fi
-    MOUNTD_RPCPORT=$[ 21111 + $NFS_INSTANCE ]
-    NFSD_RPCPORT=$[ 11111 + $NFS_INSTANCE ]
-    NFSD_PORT=$[ 3049 + 2 * $NFS_INSTANCE ]
-    MOUNTD_PORT=$[ 3048 + 2 * $NFS_INSTANCE ]
-    UNFS_OPTS="nfsvers=3,port=$NFSD_PORT,mountprog=$MOUNTD_RPCPORT,nfsprog=$NFSD_RPCPORT,udp,mountport=$MOUNTD_PORT"
-
-    PSEUDO_LOCALSTATEDIR=~/.runqemu-sdk/pseudo
-    export PSEUDO_LOCALSTATEDIR
-
-    # Start the userspace NFS server
-    echo "runqemu-export-rootfs restart $ROOTFS"
-    runqemu-export-rootfs restart $ROOTFS
-    if [ $? != 0 ]; then
-        return 1
-    fi
-    NFSRUNNING="true"
-fi
-
-
-set_mem_size() {
-    if [ ! -z "$mem_set" ] ; then
-        #Get memory setting size from user input
-        mem_size=`echo $mem_set | sed 's/-m[[:space:]] *//'`
-    else
-        mem_size=$1
-    fi
-    # QEMU_MEMORY has 'M' appended to mem_size
-    QEMU_MEMORY="$mem_size"M
-
-}
-
-config_qemuarm() {
-    set_mem_size 128
-    QEMU=qemu-system-arm
-    MACHINE_SUBTYPE=versatilepb
-    export QEMU_AUDIO_DRV="none"
-    QEMU_UI_OPTIONS="$QEMU_UI_OPTIONS"
-    if [ "${FSTYPE:0:3}" = "ext" -o "$FSTYPE" = "btrfs" -o "$FSTYPE" = "wic" ]; then
-        KERNCMDLINE="root=$DROOT rw console=ttyAMA0,115200 console=tty $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY highres=off"
-        QEMUOPTIONS="$QEMU_NETWORK_CMD -M ${MACHINE_SUBTYPE} $ROOTFS_OPTIONS -no-reboot $QEMU_UI_OPTIONS"
-    fi
-    if [ "$FSTYPE" = "nfs" ]; then
-        if [ "$NFS_SERVER" = "192.168.7.1" -a ! -d "$NFS_DIR" ]; then
-            echo "Error: NFS mount point $ROOTFS doesn't exist"
-            cleanup
-            return 1
-        fi
-        KERNCMDLINE="root=/dev/nfs nfsroot=$NFS_SERVER:$NFS_DIR,$UNFS_OPTS rw console=ttyAMA0,115200 $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
-        QEMUOPTIONS="$QEMU_NETWORK_CMD -M ${MACHINE_SUBTYPE} --no-reboot $QEMU_UI_OPTIONS"
-    fi
-    if [ "$MACHINE" = "qemuarmv6" ]; then
-        QEMUOPTIONS="$QEMUOPTIONS -cpu arm1136"
-    fi
-    if [ "$MACHINE" = "qemuarmv7" ]; then
-        QEMUOPTIONS="$QEMUOPTIONS -cpu cortex-a8"
-    fi
-}
-
-config_qemuarm64() {
-    set_mem_size 512
-    QEMU=qemu-system-aarch64
-
-    QEMU_NETWORK_CMD="-netdev tap,id=net0,ifname=$TAP,script=no,downscript=no -device virtio-net-device,netdev=net0 "
-    DROOT="/dev/vda"
-    ROOTFS_OPTIONS="-drive id=disk0,file=$ROOTFS,if=none,format=raw -device virtio-blk-device,drive=disk0"
-
-    export QEMU_AUDIO_DRV="none"
-    if [ "x$SERIALSTDIO" = "x" ] ; then
-        QEMU_UI_OPTIONS="-nographic"
-    else
-        QEMU_UI_OPTIONS=""
-    fi
-    if [ "${FSTYPE:0:3}" = "ext" -o "$FSTYPE" = "btrfs" -o "$FSTYPE" = "wic" ]; then
-        KERNCMDLINE="root=$DROOT rw console=ttyAMA0,38400 mem=$QEMU_MEMORY highres=off $KERNEL_NETWORK_CMD"
-        # qemu-system-aarch64 only support '-machine virt -cpu cortex-a57' for now
-        QEMUOPTIONS="$QEMU_NETWORK_CMD -machine virt -cpu cortex-a57 $ROOTFS_OPTIONS $QEMU_UI_OPTIONS"
-    fi
-    if [ "$FSTYPE" = "nfs" ]; then
-        if [ "$NFS_SERVER" = "192.168.7.1" -a ! -d "$NFS_DIR" ]; then
-            echo "Error: NFS mount point $ROOTFS doesn't exist"
-            cleanup
-            return 1
-        fi
-        KERNCMDLINE="root=/dev/nfs nfsroot=$NFS_SERVER:$NFS_DIR,$UNFS_OPTS rw console=ttyAMA0,38400 mem=$QEMU_MEMORY highres=off $KERNEL_NETWORK_CMD"
-        QEMUOPTIONS="$QEMU_NETWORK_CMD -machine virt -cpu cortex-a57 $QEMU_UI_OPTIONS"
-    fi
-}
-
-config_qemux86() {
-    set_mem_size 256
-    QEMU=qemu-system-i386
-    if [ "$KVM_ACTIVE" = "yes" ]; then
-        CPU_SUBTYPE=kvm32
-    else
-        CPU_SUBTYPE=qemu32
-    fi
-    if [ ! -z "$vga_option" ]; then
-        QEMU_UI_OPTIONS="$QEMU_UI_OPTIONS"
-    else
-        QEMU_UI_OPTIONS="$QEMU_UI_OPTIONS -vga vmware"
-    fi
-    if [ "${FSTYPE:0:3}" = "ext" -o "$FSTYPE" = "btrfs" -o "$FSTYPE" = "wic" ]; then
-        KERNCMDLINE="vga=0 uvesafb.mode_option=640x480-32 root=$DROOT rw mem=$QEMU_MEMORY $KERNEL_NETWORK_CMD"
-        QEMUOPTIONS="$QEMU_NETWORK_CMD -cpu $CPU_SUBTYPE $ROOTFS_OPTIONS $QEMU_UI_OPTIONS"
-    fi
-    if [ "${FSTYPE:0:4}" = "cpio" ]; then
-        KERNCMDLINE="vga=0 uvesafb.mode_option=640x480-32 root=/dev/ram0 rw mem=$QEMU_MEMORY $KERNEL_NETWORK_CMD"
-        QEMUOPTIONS="$QEMU_NETWORK_CMD -cpu $CPU_SUBTYPE -initrd $ROOTFS $QEMU_UI_OPTIONS"
-    fi
-
-    if [ "$FSTYPE" = "nfs" ]; then
-        if [ "$NFS_SERVER" = "192.168.7.1" -a ! -d "$NFS_DIR" ]; then
-            echo "Error: NFS mount point $ROOTFS doesn't exist."
-            cleanup
-            return 1
-        fi
-        KERNCMDLINE="root=/dev/nfs nfsroot=$NFS_SERVER:$NFS_DIR,$UNFS_OPTS rw $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
-        QEMUOPTIONS="$QEMU_NETWORK_CMD $QEMU_UI_OPTIONS"
-    fi
-    if [ "$IS_VM" = "true" ]; then
-        QEMUOPTIONS="$QEMU_NETWORK_CMD $QEMU_UI_OPTIONS"
-    fi
-    # Currently oprofile's event based interrupt mode doesn't work(Bug #828) in
-    # qemux86 and qemux86-64. We can use timer interrupt mode for now.
-    KERNCMDLINE="$KERNCMDLINE oprofile.timer=1"
-}
-
-config_qemux86_64() {
-    set_mem_size 256
-    QEMU=qemu-system-x86_64
-    if [ "$KVM_ACTIVE" = "yes" ]; then
-        CPU_SUBTYPE=kvm64
-    else
-        CPU_SUBTYPE=core2duo
-    fi
-    if [ ! -z "$vga_option" ]; then
-        QEMU_UI_OPTIONS="$QEMU_UI_OPTIONS"
-    else
-        QEMU_UI_OPTIONS="$QEMU_UI_OPTIONS -vga vmware"
-    fi
-    if [ "${FSTYPE:0:3}" = "ext" -o "$FSTYPE" = "btrfs" -o "$FSTYPE" = "wic" ]; then
-        KERNCMDLINE="vga=0 uvesafb.mode_option=640x480-32 root=$DROOT rw mem=$QEMU_MEMORY $KERNEL_NETWORK_CMD"
-        QEMUOPTIONS="$QEMU_NETWORK_CMD -cpu $CPU_SUBTYPE $ROOTFS_OPTIONS $QEMU_UI_OPTIONS"
-    fi
-    if [ "$FSTYPE" = "nfs" ]; then
-        if [ "x$ROOTFS" = "x" ]; then
-            ROOTFS=/srv/nfs/qemux86-64
-        fi
-        if [ ! -d "$ROOTFS" ]; then
-            echo "Error: NFS mount point $ROOTFS doesn't exist."
-            cleanup
-            return 1
-        fi
-        KERNCMDLINE="root=/dev/nfs nfsroot=$NFS_SERVER:$NFS_DIR,$UNFS_OPTS rw $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
-        QEMUOPTIONS="$QEMU_NETWORK_CMD -cpu $CPU_SUBTYPE $QEMU_UI_OPTIONS"
-    fi
-    if [ "$IS_VM" = "true" ]; then
-        QEMUOPTIONS="$QEMU_NETWORK_CMD -cpu $CPU_SUBTYPE $QEMU_UI_OPTIONS"
-    fi
-    # Currently oprofile's event based interrupt mode doesn't work(Bug #828) in
-    # qemux86 and qemux86-64. We can use timer interrupt mode for now.
-    KERNCMDLINE="$KERNCMDLINE oprofile.timer=1"
-}
-
-config_qemumips() {
-    set_mem_size 256
-    case "$MACHINE" in
-       qemumips)   QEMU=qemu-system-mips ;;
-       qemumipsel) QEMU=qemu-system-mipsel ;;
-       qemumips64) QEMU=qemu-system-mips64 ;;
-    esac
-    MACHINE_SUBTYPE=malta
-    QEMU_UI_OPTIONS="-vga cirrus $QEMU_UI_OPTIONS"
-    if [ "${FSTYPE:0:3}" = "ext" -o "$FSTYPE" = "btrfs" -o "$FSTYPE" = "wic" ]; then
-        #KERNCMDLINE="root=/dev/hda console=ttyS0 console=tty0 $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
-        KERNCMDLINE="root=$DROOT rw console=ttyS0 console=tty $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
-        QEMUOPTIONS="$QEMU_NETWORK_CMD -M $MACHINE_SUBTYPE $ROOTFS_OPTIONS -no-reboot $QEMU_UI_OPTIONS"
-    fi
-    if [ "$FSTYPE" = "nfs" ]; then
-        if [ "$NFS_SERVER" = "192.168.7.1" -a ! -d "$NFS_DIR" ]; then
-            echo "Error: NFS mount point $ROOTFS doesn't exist"
-            cleanup
-            return 1
-        fi
-        KERNCMDLINE="root=/dev/nfs console=ttyS0 console=tty nfsroot=$NFS_SERVER:$NFS_DIR,$UNFS_OPTS rw $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
-        QEMUOPTIONS="$QEMU_NETWORK_CMD -M $MACHINE_SUBTYPE -no-reboot $QEMU_UI_OPTIONS"
-    fi
-}
-
-config_qemuppc() {
-    set_mem_size 256
-    QEMU=qemu-system-ppc
-    MACHINE_SUBTYPE=mac99
-    CPU_SUBTYPE=G4
-    QEMU_UI_OPTIONS="$QEMU_UI_OPTIONS"
-    if [ "$SLIRP_ENABLED" = "yes" ]; then
-        QEMU_NETWORK_CMD=""
-    else
-        QEMU_NETWORK_CMD="-net nic,model=pcnet $QEMU_TAP_CMD"
-    fi
-    if [ "${FSTYPE:0:3}" = "ext" -o "$FSTYPE" = "btrfs" -o "$FSTYPE" = "wic" ]; then
-        KERNCMDLINE="root=$DROOT rw console=ttyS0 console=tty $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
-        QEMUOPTIONS="$QEMU_NETWORK_CMD -cpu $CPU_SUBTYPE -M $MACHINE_SUBTYPE $ROOTFS_OPTIONS -no-reboot $QEMU_UI_OPTIONS"
-    fi
-    if [ "$FSTYPE" = "nfs" ]; then
-        if [ "$NFS_SERVER" = "192.168.7.1" -a ! -d "$NFS_DIR" ]; then
-            echo "Error: NFS mount point $ROOTFS doesn't exist"
-            cleanup
-            return 1
-        fi
-        KERNCMDLINE="root=/dev/nfs console=ttyS0 console=tty nfsroot=$NFS_SERVER:$NFS_DIR,$UNFS_OPTS rw $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
-        QEMUOPTIONS="$QEMU_NETWORK_CMD -cpu $CPU_SUBTYPE -M $MACHINE_SUBTYPE -no-reboot $QEMU_UI_OPTIONS"
-    fi
-}
-
-config_qemush4() {
-    set_mem_size 1024
-    QEMU=qemu-system-sh4
-    MACHINE_SUBTYPE=r2d
-    QEMU_UI_OPTIONS="$QEMU_UI_OPTIONS"
-    if [ "${FSTYPE:0:3}" = "ext" -o "$FSTYPE" = "btrfs" -o "$FSTYPE" = "wic" ]; then
-        #KERNCMDLINE="root=/dev/hda console=ttyS0 console=tty0 $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
-        KERNCMDLINE="root=/dev/hda rw console=ttySC1 noiotrap earlyprintk=sh-sci.1 console=tty $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
-        QEMUOPTIONS="$QEMU_NETWORK_CMD -M $MACHINE_SUBTYPE -hda $ROOTFS -no-reboot $QEMU_UI_OPTIONS -monitor null -serial vc -serial stdio"
-        SERIALSTDIO="1"
-    fi
-    if [ "$FSTYPE" = "nfs" ]; then
-        if [ "$NFS_SERVER" = "192.168.7.1" -a ! -d "$NFS_DIR" ]; then
-            echo "Error: NFS mount point $ROOTFS doesn't exist"
-            cleanup
-            return 1
-        fi
-        KERNCMDLINE="root=/dev/nfs console=ttySC1 noiotrap earlyprintk=sh-sci.1 console=tty nfsroot=$NFS_SERVER:$NFS_DIR,$UNFS_OPTS rw $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
-        QEMUOPTIONS="$QEMU_NETWORK_CMD -M $MACHINE_SUBTYPE -no-reboot $QEMU_UI_OPTIONS -monitor null -serial vc -serial stdio"
-        SERIALSTDIO="1"
-    fi
-}
-
-config_qemuzynq() {
-    set_mem_size 1024
-    QEMU=qemu-system-arm
-    QEMU_NETWORK_CMD="-net nic -net nic $QEMU_TAP_CMD"
-    QEMU_SYSTEM_OPTIONS="$QEMU_NETWORK_CMD -M xilinx-zynq-a9 -serial null -serial mon:stdio -nographic -dtb $KERNEL-$MACHINE.dtb"
-    # zynq serial ports are named 'ttyPS0' and 'ttyPS1', fixup the default values
-    SCRIPT_KERNEL_OPT=$(echo "$SCRIPT_KERNEL_OPT" | sed 's/console=ttyS/console=ttyPS/g')
-    if [ "${FSTYPE:0:3}" = "ext" -o "${FSTYPE:0:4}" = "cpio" ]; then
-        KERNCMDLINE="earlyprintk root=/dev/ram rw $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
-        QEMUOPTIONS="$QEMU_SYSTEM_OPTIONS -initrd $ROOTFS"
-    fi
-}
-
-config_qemuzynqmp() {
-    set_mem_size 2048
-    QEMU=qemu-system-aarch64
-
-    export QEMU_AUDIO_DRV="none"
-    if [ "x$SERIALSTDIO" = "x" ] ; then
-        QEMU_UI_OPTIONS="-nographic"
-    else
-        QEMU_UI_OPTIONS=""
-    fi
-
-    # Networking and system options required for QEMU ZynqMP machine
-    QEMU_NETWORK_CMD="-net nic -net nic -net nic -net nic -net user,net=10.10.70.0,dhcpstart=10.10.70.1,host=10.10.70.101"
-    QEMU_SYSTEM_OPTIONS="$QEMU_NETWORK_CMD -M xlnx-ep108 -serial mon:stdio -dtb $DEPLOY_DIR_IMAGE/${QEMU_DTB}.dtb"
-
-    QEMUOPTIONS="$QEMU_SYSTEM_OPTIONS $QEMU_UI_OPTIONS -initrd $ROOTFS"
-}
-
-config_qemumicroblaze() {
-    set_mem_size 256
-    QEMU=qemu-system-microblazeel
-    QEMU_SYSTEM_OPTIONS="$QEMU_NETWORK_CMD -M petalogix-ml605 -serial mon:stdio"
-    if [ "${FSTYPE:0:3}" = "ext" -o "${FSTYPE:0:4}" = "cpio" ]; then
-        KERNCMDLINE="earlyprintk root=/dev/ram rw $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
-        QEMUOPTIONS="$QEMU_SYSTEM_OPTIONS -initrd $ROOTFS"
-    fi
-}
-
-case "$MACHINE" in
-    "qemuarm" | "qemuarmv6" | "qemuarmv7")
-        config_qemuarm
-        ;;
-    "qemuarm64")
-        config_qemuarm64
-        ;;
-    "qemux86")
-        config_qemux86
-        ;;
-    "qemux86-64")
-        config_qemux86_64
-        ;;
-    "qemumips" | "qemumipsel" | "qemumips64")
-        config_qemumips
-        ;;
-    "qemuppc")
-        config_qemuppc
-        ;;
-    "qemush4")
-        config_qemush4
-        ;;
-    "qemuzynq")
-        config_qemuzynq
-        ;;
-    "qemuzynqmp")
-        config_qemuzynqmp
-        ;;
-    "qemumicroblaze")
-        config_qemumicroblaze
-        ;;
-    *)
-        echo "Error: Unsupported machine type $MACHINE"
-        return 1
-    ;;
-esac
-
-# We need to specify -m <mem_size> to overcome a bug in qemu 0.14.0
-# https://bugs.launchpad.net/ubuntu/+source/qemu-kvm/+bug/584480
-if [ -z "$mem_set" ] ; then
-  SCRIPT_QEMU_EXTRA_OPT="$SCRIPT_QEMU_EXTRA_OPT -m $mem_size"
-fi
-
-if [ "${FSTYPE:0:3}" = "ext" ]; then
-    KERNCMDLINE="$KERNCMDLINE rootfstype=$FSTYPE"
-fi
-
-if [ "$FSTYPE" = "cpio.gz" ]; then
-    QEMUOPTIONS="-initrd $ROOTFS -nographic"
-    KERNCMDLINE="root=/dev/ram0 console=ttyS0 debugshell"
-fi
-
-if [ "$FSTYPE" = "iso" ]; then
-    QEMUOPTIONS="$QEMU_NETWORK_CMD -cdrom $ROOTFS $QEMU_UI_OPTIONS"
-fi
-
-if [ "x$QEMUOPTIONS" = "x" ]; then
-    echo "Error: Unable to support this combination of options"
-    cleanup
-    return 1
-fi
-
-if [ "$TCPSERIAL_PORTNUM" != "" ]; then
-    if [ "$MACHINE" = "qemuarm64" ]; then
-        SCRIPT_QEMU_EXTRA_OPT="$SCRIPT_QEMU_EXTRA_OPT -device virtio-serial-device -chardev socket,id=virtcon,port=$TCPSERIAL_PORTNUM,host=127.0.0.1 -device virtconsole,chardev=virtcon"
-    else
-        SCRIPT_QEMU_EXTRA_OPT="$SCRIPT_QEMU_EXTRA_OPT -serial tcp:127.0.0.1:$TCPSERIAL_PORTNUM"
-    fi
-fi
-
-PATH=$OECORE_NATIVE_SYSROOT/usr/bin:$PATH
-
-QEMUBIN=`which $QEMU 2> /dev/null`
-if [ ! -x "$QEMUBIN" ]; then
-    echo "Error: No QEMU binary '$QEMU' could be found."
-    cleanup
-    return 1
-fi
-
-NEED_GL=`ldd $QEMUBIN/$QEMU 2>&1 | grep libGLU`
-# We can't run without a libGL.so
-if [ "$NEED_GL" != "" ]; then
-    libgl='no'
-
-    [ -e /usr/lib/libGL.so -a -e /usr/lib/libGLU.so ] && libgl='yes'
-    [ -e /usr/lib64/libGL.so -a -e /usr/lib64/libGLU.so ] && libgl='yes'
-    [ -e /usr/lib/*-linux-gnu/libGL.so -a -e /usr/lib/*-linux-gnu/libGLU.so ] && libgl='yes'
-
-    if [ "$libgl" != 'yes' ]; then
-        echo "You need libGL.so and libGLU.so to exist in your library path to run the QEMU emulator.
-        Ubuntu package names are: libgl1-mesa-dev and libglu1-mesa-dev.
-        Fedora package names are: mesa-libGL-devel mesa-libGLU-devel."
-        return 1;
-    fi
-fi
-
-do_quit() {
-    cleanup
-    return 1
-}
-
-trap do_quit INT TERM QUIT
-
-# qemu got segfault if linked with nVidia's libgl
-GL_LD_PRELOAD=$LD_PRELOAD
-
-if ldd $QEMUBIN | grep -i nvidia &> /dev/null
-then
-cat << EOM
-WARNING: nVidia proprietary OpenGL libraries detected.
-nVidia's OpenGL libraries are known to have compatibility issues with qemu,
-resulting in a segfault. Please uninstall these drivers or ensure the mesa libGL
-libraries precede nvidia's via LD_PRELOAD(Already do it on Ubuntu 10).
-EOM
-
-# Automatically use Ubuntu system's mesa libGL, other distro can add its own path
-if grep -i ubuntu /etc/lsb-release &> /dev/null
-then
-    # precede nvidia's driver on Ubuntu 10
-    UBUNTU_MAIN_VERSION=`cat /etc/lsb-release |grep DISTRIB_RELEASE |cut -d=  -f 2| cut -d. -f 1`
-    if [ "$UBUNTU_MAIN_VERSION" = "10" ];
-    then
-        GL_PATH=""
-        if test -e /usr/lib/libGL.so
-        then 
-            GL_PATH="/usr/lib/libGL.so"
-        elif test -e /usr/lib/x86_64-linux-gnu/libGL.so
-        then
-            GL_PATH="/usr/lib/x86_64-linux-gnu/libGL.so"
-        fi
-
-        echo "Skip nVidia's libGL on Ubuntu 10!"
-        GL_LD_PRELOAD="$GL_PATH $LD_PRELOAD"
-    fi
-fi
-fi
-
-if [ "x$SERIALSTDIO" = "x1" ]; then
-        echo "Interrupt character is '^]'"
-        stty intr ^]
-fi
-
-
-# Preserve the multiplexing behavior for the monitor that would be there based
-# on whether nographic is used.
-if echo "$QEMUOPTIONS $SERIALOPTS $SCRIPT_QEMU_OPT $SCRIPT_QEMU_EXTRA_OPT" | grep -- "-nographic"; then
-    FIRST_SERIAL_OPT="-serial mon:stdio"
-else
-    FIRST_SERIAL_OPT="-serial mon:vc"
-fi
-
-# qemuarm64 uses virtio for any additional serial ports so the normal mechanism
-# of using -serial will not work
-if [ "$MACHINE" = "qemuarm64" ]; then
-    SECOND_SERIAL_OPT="-device virtio-serial-device -chardev null,id=virtcon -device virtconsole,chardev=virtcon"
-else
-    SECOND_SERIAL_OPT="-serial null"
-fi
-
-# We always want a ttyS1. Since qemu by default adds a serial port when
-# nodefaults is not specified, it seems that all that would be needed is to
-# make sure a "-serial" is there. However, it appears that when "-serial" is
-# specified, it ignores the default serial port that is normally added.
-# So here we make sure to add two -serial if there are none. And only one
-# if there is one -serial already.
-NUM_SERIAL_OPTS=`echo $QEMUOPTIONS $SERIALOPTS $SCRIPT_QEMU_OPT $SCRIPT_QEMU_EXTRA_OPT | sed -e 's/ /\n/g' | grep --count -- -serial`
-
-if [ "$NUM_SERIAL_OPTS" = "0" ]; then
-    SCRIPT_QEMU_EXTRA_OPT="$SCRIPT_QEMU_EXTRA_OPT $FIRST_SERIAL_OPT $SECOND_SERIAL_OPT"
-elif [ "$NUM_SERIAL_OPTS" = "1" ]; then
-    SCRIPT_QEMU_EXTRA_OPT="$SCRIPT_QEMU_EXTRA_OPT $SECOND_SERIAL_OPT"
-fi
-
-echo "Running $QEMU..."
-# -no-reboot is a mandatory option - see bug #100
-if [ "$IS_VM" = "true" ]; then
-    # Check root=/dev/sdX or root=/dev/vdX
-    [ ! -e "$VM" ] && error "VM image is not found!"
-
-    case "$FORCE_DRIVE_IF" in
-        "ide")
-            echo "Using ide drive"
-            VM_DRIVE="$VM"
-	    ;;
-	"scsi")
-            echo "Using scsi drive"
-            VM_DRIVE="-drive if=none,id=hd,file=$VM -device virtio-scsi-pci,id=scsi -device scsi-hd,drive=hd"
-	    ;;
-	"virtio")
-            echo "Using virtio block drive"
-            VM_DRIVE="-drive if=virtio,file=$VM"
-	    ;;
-	"")
-            if grep -q 'root=/dev/sd' $VM; then
-                echo "Using scsi drive"
-                VM_DRIVE="-drive if=none,id=hd,file=$VM -device virtio-scsi-pci,id=scsi -device scsi-hd,drive=hd"
-            elif grep -q 'root=/dev/hd' $VM; then
-                echo "Using ide drive"
-                VM_DRIVE="$VM"
-            else
-                echo "Using virtio block drive"
-                VM_DRIVE="-drive if=virtio,file=$VM"
-            fi
-	    ;;
-	*)
-	    error "Invalid drive interface: $FORCE_DRIVE_IF"
-        ;;
-    esac
-
-    QEMU_FIRE="$QEMUBIN $VM_DRIVE $QEMUOPTIONS $SERIALOPTS -no-reboot $SCRIPT_QEMU_OPT $SCRIPT_QEMU_EXTRA_OPT"
-    echo $QEMU_FIRE
-    LD_PRELOAD="$GL_LD_PRELOAD" $QEMU_FIRE
-elif [ "$FSTYPE" = "iso" -o "$FSTYPE" = "wic" ]; then
-    QEMU_FIRE="$QEMUBIN $QEMUOPTIONS $SERIALOPTS -no-reboot $SCRIPT_QEMU_OPT $SCRIPT_QEMU_EXTRA_OPT"
-    echo $QEMU_FIRE
-    LD_PRELOAD="$GL_LD_PRELOAD" $QEMU_FIRE
-else
-    QEMU_FIRE="$QEMUBIN -kernel $KERNEL $QEMUOPTIONS $SLIRP_CMD $SERIALOPTS -no-reboot $SCRIPT_QEMU_OPT $SCRIPT_QEMU_EXTRA_OPT"
-    echo $QEMU_FIRE -append '"'$KERNCMDLINE $SCRIPT_KERNEL_OPT'"'
-    LD_PRELOAD="$GL_LD_PRELOAD" $QEMU_FIRE -append "$KERNCMDLINE $SCRIPT_KERNEL_OPT"
-fi
-ret=$?
-if [ "$SLIRP_ENABLED" != "yes" ]; then
-        cleanup
-fi
-
-#set the original stty values before exit
-stty ${ORIG_STTY}
-trap - INT TERM QUIT
-
-return $ret
diff --git a/meta-sota/scripts/runqemu.README b/meta-sota/scripts/runqemu.README
deleted file mode 100644
index 5908d83..0000000
--- a/meta-sota/scripts/runqemu.README
+++ /dev/null
@@ -1,42 +0,0 @@
-Using OE images with QEMU
-=========================
-
-OE-Core can generate qemu bootable kernels and images with can be used 
-on a desktop system. The scripts currently support booting ARM, MIPS, PowerPC
-and x86 (32 and 64 bit) images. The scripts can be used within the OE build 
-system or externaly.
-
-The runqemu script is run as: 
-
-   runqemu <machine> <zimage> <filesystem>
-
-where:
-
-   <machine> is the machine/architecture to use (qemuarm/qemumips/qemuppc/qemux86/qemux86-64)
-   <zimage> is the path to a kernel (e.g. zimage-qemuarm.bin)
-   <filesystem> is the path to an ext2 image (e.g. filesystem-qemuarm.ext2) or an nfs directory
-   
-If <machine> isn't specified, the script will try to detect the machine name 
-from the name of the <zimage> file.
-
-If <filesystem> isn't specified, nfs booting will be assumed.
-
-When used within the build system, it will default to qemuarm, ext2 and the last kernel and 
-core-image-sato-sdk image built by the build system. If an sdk image isn't present it will look
-for sato and minimal images.
-
-Full usage instructions can be seen by running the command with no options specified.
-
-
-Notes
-=====
-
- - The scripts run qemu using sudo. Change perms on /dev/net/tun to 
-   run as non root. The runqemu-gen-tapdevs script can also be used by
-   root to prepopulate the appropriate network devices.
- - You can access the host computer at 192.168.7.1 within the image.
- - Your qemu system will be accessible as 192.16.7.2.
- - The script extracts the root filesystem specified under pseudo and sets up a userspace
-   NFS server to share the image over by default meaning the filesystem can be accessed by
-   both the host and guest systems.
-