diff options
Diffstat (limited to 'meta-sota/classes/sdcard_image-rpi-ota.bbclass')
| -rw-r--r-- | meta-sota/classes/sdcard_image-rpi-ota.bbclass | 196 |
1 files changed, 0 insertions, 196 deletions
diff --git a/meta-sota/classes/sdcard_image-rpi-ota.bbclass b/meta-sota/classes/sdcard_image-rpi-ota.bbclass deleted file mode 100644 index deea8d1..0000000 --- a/meta-sota/classes/sdcard_image-rpi-ota.bbclass +++ /dev/null @@ -1,196 +0,0 @@ -inherit image_types -inherit linux-raspberrypi-base - -# -# Create an image that can by written onto a SD card using dd. -# -# The disk layout used is: -# -# 0 -> IMAGE_ROOTFS_ALIGNMENT - reserved for other data -# IMAGE_ROOTFS_ALIGNMENT -> BOOT_SPACE - bootloader and kernel -# BOOT_SPACE -> SDIMG_OTA_SIZE - rootfs -# - -# Default Free space = 1.3x -# Use IMAGE_OVERHEAD_FACTOR to add more space -# <---------> -# 4MiB 40MiB SDIMG_OTA_ROOTFS -# <-----------------------> <----------> <----------------------> -# ------------------------ ------------ ------------------------ -# | IMAGE_ROOTFS_ALIGNMENT | BOOT_SPACE | OTAROOT_SIZE | -# ------------------------ ------------ ------------------------ -# ^ ^ ^ ^ -# | | | | -# 0 4MiB 4MiB + 40MiB 4MiB + 40Mib + SDIMG_OTA_ROOTFS - -# This image depends on the rootfs image -IMAGE_TYPEDEP_rpi-sdimg-ota = "${SDIMG_OTA_ROOTFS_TYPE}" - -# Set kernel and boot loader -IMAGE_BOOTLOADER ?= "bcm2835-bootfiles" - -# Set initramfs extension -KERNEL_INITRAMFS ?= "" - -# Kernel image name -SDIMG_OTA_KERNELIMAGE_raspberrypi ?= "kernel.img" -SDIMG_OTA_KERNELIMAGE_raspberrypi2 ?= "kernel7.img" - -# Boot partition volume id -BOOTDD_VOLUME_ID ?= "${MACHINE}" - -# Boot partition size [in KiB] (will be rounded up to IMAGE_ROOTFS_ALIGNMENT) -BOOT_SPACE ?= "40960" - -# Set alignment to 4MB [in KiB] -IMAGE_ROOTFS_ALIGNMENT = "4096" - -# Use an uncompressed ext3 by default as rootfs -SDIMG_OTA_ROOTFS_TYPE ?= "otaimg" -SDIMG_OTA_ROOTFS = "${DEPLOY_DIR_IMAGE}/${IMAGE_LINK_NAME}.${SDIMG_OTA_ROOTFS_TYPE}" - -IMAGE_DEPENDS_rpi-sdimg-ota = " \ - parted-native \ - mtools-native \ - dosfstools-native \ - virtual/kernel:do_deploy \ - ${IMAGE_BOOTLOADER} \ - u-boot \ - " -IMAGE_TYPEDEP_rpi-sdimg-ota = "otaimg" - -# SD card image name -SDIMG_OTA = "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.rpi-sdimg-ota" - -# Compression method to apply to SDIMG_OTA after it has been created. Supported -# compression formats are "gzip", "bzip2" or "xz". The original .rpi-sdimg-ota file -# is kept and a new compressed file is created if one of these compression -# formats is chosen. If SDIMG_OTA_COMPRESSION is set to any other value it is -# silently ignored. -#SDIMG_OTA_COMPRESSION ?= "" - -# Additional files and/or directories to be copied into the vfat partition from the IMAGE_ROOTFS. -FATPAYLOAD ?= "" - -IMAGEDATESTAMP = "${@time.strftime('%Y.%m.%d',time.gmtime())}" -IMAGE_CMD_rpi-sdimg-ota[vardepsexclude] += "IMAGEDATESTAMP" -IMAGE_CMD_rpi-sdimg-ota[vardepsexclude] += "DATETIME" - -IMAGE_CMD_rpi-sdimg-ota () { - - # Align partitions - OTAROOT_SIZE=`du -Lb ${SDIMG_OTA_ROOTFS} | cut -f1` - OTAROOT_SIZE=$(expr ${OTAROOT_SIZE} / 1024 + 1) - BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1) - BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE_ALIGNED} - ${BOOT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT}) - SDIMG_OTA_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + $OTAROOT_SIZE) - - echo "Creating filesystem with Boot partition ${BOOT_SPACE_ALIGNED} KiB and RootFS $OTAROOT_SIZE KiB" - - # Check if we are building with device tree support - DTS="${@get_dts(d, None)}" - - # Initialize sdcard image file - dd if=/dev/zero of=${SDIMG_OTA} bs=1024 count=0 seek=${SDIMG_OTA_SIZE} - - # Create partition table - parted -s ${SDIMG_OTA} mklabel msdos - # Create boot partition and mark it as bootable - parted -s ${SDIMG_OTA} unit KiB mkpart primary fat32 ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT}) - parted -s ${SDIMG_OTA} set 1 boot on - # Create rootfs partition to the end of disk - parted -s ${SDIMG_OTA} -- unit KiB mkpart primary ext2 $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT}) -1s - parted ${SDIMG_OTA} print - - # Create a vfat image with boot files - BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDIMG_OTA} unit b print | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 512 /2 }') - rm -f ${WORKDIR}/boot.img - mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS - sync - - mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/bcm2835-bootfiles/* ::/ - - if test -n "${DTS}"; then - # Device Tree Overlays are assumed to be suffixed by '-overlay.dtb' string and will be put in a dedicated folder - DT_OVERLAYS="${@split_overlays(d, 0)}" - DT_ROOT="${@split_overlays(d, 1)}" - - # Copy board device trees to root folder - for DTB in ${DT_ROOT}; do - DTB_BASE_NAME=`basename ${DTB} .dtb` - - mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTB_BASE_NAME}.dtb ::${DTB_BASE_NAME}.dtb - done - - # Copy device tree overlays to dedicated folder - mmd -i ${WORKDIR}/boot.img overlays - for DTB in ${DT_OVERLAYS}; do - DTB_EXT=${DTB##*.} - DTB_BASE_NAME=`basename ${DTB} ."${DTB_EXT}"` - - mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTB_BASE_NAME}.${DTB_EXT} ::overlays/${DTB_BASE_NAME}.${DTB_EXT} - done - fi - - case "${KERNEL_IMAGETYPE}" in - "uImage") - mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/u-boot.bin ::${SDIMG_OTA_KERNELIMAGE} - ;; - *) - bbfatal "Kernel uImage is required for OTA image. Please set KERNEL_IMAGETYPE to \"uImage\"" - ;; - esac - - if [ -n ${FATPAYLOAD} ] ; then - echo "Copying payload into VFAT" - for entry in ${FATPAYLOAD} ; do - # add the || true to stop aborting on vfat issues like not supporting .~lock files - mcopy -i ${WORKDIR}/boot.img -s -v ${IMAGE_ROOTFS}$entry :: || true - done - fi - - # Add stamp file - echo "${IMAGE_NAME}-${IMAGEDATESTAMP}" > ${WORKDIR}/image-version-info - mcopy -i ${WORKDIR}/boot.img -v ${WORKDIR}//image-version-info :: - - # Burn Partitions - sync - dd if=${WORKDIR}/boot.img of=${SDIMG_OTA} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync - # If SDIMG_OTA_ROOTFS_TYPE is a .xz file use xzcat - if echo "${SDIMG_OTA_ROOTFS_TYPE}" | egrep -q "*\.xz" - then - xzcat ${SDIMG_OTA_ROOTFS} | dd of=${SDIMG_OTA} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync - else - dd if=${SDIMG_OTA_ROOTFS} of=${SDIMG_OTA} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync - fi - - # Optionally apply compression - case "${SDIMG_OTA_COMPRESSION}" in - "gzip") - gzip -k9 "${SDIMG_OTA}" - ;; - "bzip2") - bzip2 -k9 "${SDIMG_OTA}" - ;; - "xz") - xz -k "${SDIMG_OTA}" - ;; - esac - - rm -f ${DEPLOY_DIR_IMAGE}/${IMAGE_LINK_NAME}.rootfs.rpi-sdimg-ota - ln -s ${IMAGE_NAME}.rootfs.rpi-sdimg-ota ${DEPLOY_DIR_IMAGE}/${IMAGE_LINK_NAME}.rootfs.rpi-sdimg-ota -} - -ROOTFS_POSTPROCESS_COMMAND += " rpi_generate_sysctl_config ; " - -rpi_generate_sysctl_config() { - # systemd sysctl config - test -d ${IMAGE_ROOTFS}${sysconfdir}/sysctl.d && \ - echo "vm.min_free_kbytes = 8192" > ${IMAGE_ROOTFS}${sysconfdir}/sysctl.d/rpi-vm.conf - - # sysv sysctl config - IMAGE_SYSCTL_CONF="${IMAGE_ROOTFS}${sysconfdir}/sysctl.conf" - test -e ${IMAGE_ROOTFS}${sysconfdir}/sysctl.conf && \ - sed -e "/vm.min_free_kbytes/d" -i ${IMAGE_SYSCTL_CONF} - echo "" >> ${IMAGE_SYSCTL_CONF} && echo "vm.min_free_kbytes = 8192" >> ${IMAGE_SYSCTL_CONF} -} |