Updates for BSP v5.5.0marlin_12.93.0marlin_12.92.0marlin_12.91.0marlin_12.90.1marlin/12.93.0marlin/12.92.0marlin/12.91.0marlin/12.90.112.93.012.92.012.91.012.90.1

Changes:
- Kernel patches updated for the 5.10.41 linux-renesas kernel, most
  changes are for the upstream rename of the non-engineering sample H3
  from r8a7795 to r8a77951.
- The kernel patches have been renamed to match git format-patch /
  devtool naming conventions to be a bit more consistent and hopefully
  simplify future updates.
- To maintain consistency with the other rcar3 boards, as part of the
  kernel patch updates the reference hardware devicetree has been
  renamed to r8a77951-agl-refhw, which does result in a user visible
  change in the .dtb name.
- The upstreamed, then reverted upstream patch to arm-trusted-firmware
  to disable FDT generation has been replaced with a simpler patch to
  just put "renesas,unknown" in the compatible string instead of
  panic-ing.  This should be easier to carry forward.
- Documentation updated for new branch & tag.

Bug-AGL: SPEC-4103

Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I48b2cce5d55df3fff49e556821b27b8f516b98e1

1 files changed, 0 insertions, 47 deletions

diff --git a/meta-agl-refhw-gen3/recipes-kernel/linux/files/0002-revert-e233201a.patch b/meta-agl-refhw-gen3/recipes-kernel/linux/files/0002-revert-e233201a.patch
deleted file mode 100644
index 76039be..0000000
--- a/meta-agl-refhw-gen3/recipes-kernel/linux/files/0002-revert-e233201a.patch
+++ /dev/null
@@ -1,47 +0,0 @@
-Revert "wl18xx: do not invert IRQ on WLxxxx side"
-    
-This reverts commit 2bcfc394307ae164cbbdff74b902af61dc0181b4.
-The hard-coded assumption that the IRQ inversion logic is not
-needed breaks non-Kingfisher users, specifically the WLAN card
-for the AGL reference hardware board.
-
-Signed-off-by: Scott Murray <scott.murray@konsulko.com>
-
----
- drivers/net/wireless/ti/wl18xx/main.c | 8 --------
- 1 file changed, 8 deletions(-)
-
-diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
-index 764987101116..0b3cf8477c6c 100644
---- a/drivers/net/wireless/ti/wl18xx/main.c
-+++ b/drivers/net/wireless/ti/wl18xx/main.c
-@@ -865,9 +865,7 @@ static int wl18xx_pre_upload(struct wl1271 *wl)
- {
- 	u32 tmp;
- 	int ret;
--#if 0
- 	u16 irq_invert;
--#endif
- 
- 	BUILD_BUG_ON(sizeof(struct wl18xx_mac_and_phy_params) >
- 		WL18XX_PHY_INIT_MEM_SIZE);
-@@ -920,11 +918,6 @@ static int wl18xx_pre_upload(struct wl1271 *wl)
- 	if (ret < 0)
- 		goto out;
- 
--#if 0
--	/* We have level translator with inversion on IRQ line so we
--	 * set IRQ_TYPE_EDGE_FALLING in DTS, but we do not need to
--	 * invert IRQ logic on WLxxxx side!
--	 */
- 	ret = irq_get_trigger_type(wl->irq);
- 	if ((ret == IRQ_TYPE_LEVEL_LOW) || (ret == IRQ_TYPE_EDGE_FALLING)) {
- 		wl1271_info("using inverted interrupt logic: %d", ret);
-@@ -944,7 +937,6 @@ static int wl18xx_pre_upload(struct wl1271 *wl)
- 
- 		ret = wlcore_set_partition(wl, &wl->ptable[PART_PHY_INIT]);
- 	}
--#endif
- 
- out:
- 	return ret;