summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--README78
-rw-r--r--meta-agl-refhw-gen3/conf/machine/agl-refhw-h3.conf16
-rw-r--r--meta-agl-refhw-gen3/docs/ReferenceHW_Rcar_gen3.md58
-rw-r--r--meta-agl-refhw-gen3/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_%.bbappend11
-rw-r--r--meta-agl-refhw-gen3/recipes-kernel/linux/files/0001-add-agl-refhw.patch1418
-rw-r--r--meta-agl-refhw-gen3/recipes-kernel/linux/files/0001-create-r8a7795-usb-ovc-pinmux-groups.patch410
-rw-r--r--meta-agl-refhw-gen3/recipes-kernel/linux/files/0002-Introduce-dts-file-for-refhw-r-car-board.patch90
-rw-r--r--meta-agl-refhw-gen3/recipes-kernel/linux/files/0002-add-st_asm330lhh-driver.patch (renamed from meta-agl-refhw-gen3/recipes-kernel/linux/files/0001-add-st_asm330lhh-driver.patch)0
-rw-r--r--meta-agl-refhw-gen3/recipes-kernel/linux/files/0002-agl-reference-hardware-sample-bsp.patch846
-rw-r--r--meta-agl-refhw-gen3/recipes-kernel/linux/linux-renesas_%.bbappend10
10 files changed, 1955 insertions, 982 deletions
diff --git a/README b/README
index e806db8..aa8e63d 100644
--- a/README
+++ b/README
@@ -1,54 +1,65 @@
This README file contains information on the contents of the meta-agl-refhw-gen3
-layer which provides the reference hardware support for AGL environment.
+layer which provides support for the Renesas R-Car H3 based AGL reference
+hardware.
-Dependency
-==========
+Dependencies
+============
-- Yocto layers of AGL Happy Halibut.
- Especially depends on meta-renesas-rcar-gen3.
+This layer depends on:
+
+ URI: git://git.openembedded.org/openembedded-core
+ layers: meta
+ branch: dunfell
+
+ URI: git://git.openembedded.org/meta-openembedded
+ layers: meta-oe, meta-python
+ branch: dunfell
+
+ URI: https://github.com/renesas-rcar/meta-renesas
+ branch: dunfell-dev-4.14
Build Instructions
==================
- I. Adding the meta-agl-refhw-gen3 layer to your AGL environment
+ I. Building with the layer in the AGL environment
II. Build agl-demo-platform by using meta-agl-refhw-gen3
-III. Update firmware.
+III. Updating firmware
IV. Notes
I. Adding the meta-agl-refhw-gen3 layer to your AGL environment
-==============================================================
-
-You can add this layer to your AGL HH environemnt as following:
+===============================================================
-1. Put meta-refhw folder into the "$AGL_TOP/bsp" directory where AGL BSP layers
- like meta-renesas-rcar-gen3/ are placed.
- # See "Downloading AGL Software" in AGL developper site.
+This layer has been integrated into the AGL build environment for the UCB 11.0
+(Kooky Koi) release, so manual integration is no longer required. See section
+(II) below for how to build an image, and the "How to build the Firmware" section
+in the document meta-agl-refhw-gen3/docs/ReferenceHW_Rcar_gen3.md for how to
+configure a standalone build without AGL.
-2. Put refhw-h3 folder into the meta-agl/templates/machine where other machine
- configuration files are placed.
II. Build for Reference Hardware
================================
-You should follow the instructions in "Building for Supported Renesas Boards"
-section in AGL developper site to build images for reference hardware.
-The modification needed is to set machine to "refhw-h3" when execute
-aglsetup.sh (parameter of "-m" option).
+You should follow the instructions in the "Building for Supported Renesas Boards"
+section on the AGL developer site to build images for the reference hardware.
+
+Use the "h3ulcb" machine when configuring, e.g.:
$ cd $AGL_TOP
- $ source meta-agl/scripts/aglsetup.sh -m refhw-h3 -b build \
- agl-devel agl-demo agl-netboot agl-appfw-smack agl-localdev
+ $ source meta-agl/scripts/aglsetup.sh -m h3uclb -b build \
+ agl-devel agl-demo agl-localdev
-The "real" MACHINE in the internal building is set to "salvator-x" so that we
-can divert the configurations defined for salvator-x. While, the DTB file used
-by reference hardware is "r8a7795-refhw.dtb". so the settings in u-boot is
-expected as following (in case of booting from the Micro SD card in SD#0):
+This works as the AGL reference hardware support has been integrated with the
+"h3ulcb" (and "h3ulcb-nogfx") machine templates in the AGL UCB tree. In the
+resulting build, the image can be used on the reference hardware by using the
+DTB file "r8a7795-agl-refhw.dtb". In the reference hardware u-boot settings,
+this can be done with the following (in case of booting from the Micro SD card
+in SD#0):
=> setenv bootargs 'console=ttySC0,115200 root=/dev/mmcblk1p1 rootwait ro rootfstype=ext4'
=> setenv bootcmd 'run load_ker; run load_dtb; booti 0x48080000 - 0x48000000'
- => setenv load_dtb 'ext4load mmc 0:1 0x48000000 /boot/r8a7795-refhw.dtb'
+ => setenv load_dtb 'ext4load mmc 0:1 0x48000000 /boot/r8a7795-agl-refhw.dtb'
=> setenv load_ker 'ext4load mmc 0:1 0x48080000 /boot/Image'
=> saveenv
@@ -56,16 +67,19 @@ expected as following (in case of booting from the Micro SD card in SD#0):
...
bootargs=console=ttySC0,115200 root=/dev/mmcblk1p1 rootwait ro rootfstype=ext4
bootcmd=run load_ker; run load_dtb; booti 0x48080000 - 0x48000000
- load_dtb=ext4load mmc 0:1 0x48000000 /boot/r8a7795-refhw.dtb
+ load_dtb=ext4load mmc 0:1 0x48000000 /boot/r8a7795-agl-refhw.dtb
load_ker=ext4load mmc 0:1 0x48080000 /boot/Image
..
-III. Update firmware.
-=====================
-Please refer to meta-agl-refhw-gen3/docs/ReferenceHW_Rcar_gen3.md for detail.
+
+III. Updating firmware
+======================
+
+Please refer to meta-agl-refhw-gen3/docs/ReferenceHW_Rcar_gen3.md for details.
+
IV. Notes
-==========
+=========
1. SD#1 is not supported.
-2. There are suspicious HDMI0/1 interrupts detected and disabled forcely by
+2. There are suspicious HDMI0/1 interrupts detected and disabled forcibly by
the kernel during boot. The reason is under investigation.
diff --git a/meta-agl-refhw-gen3/conf/machine/agl-refhw-h3.conf b/meta-agl-refhw-gen3/conf/machine/agl-refhw-h3.conf
new file mode 100644
index 0000000..f302d45
--- /dev/null
+++ b/meta-agl-refhw-gen3/conf/machine/agl-refhw-h3.conf
@@ -0,0 +1,16 @@
+# Using H3, needs to be defined before pulling in salvator-x as a base
+SOC_FAMILY = "r8a7795"
+
+require conf/machine/salvator-x.conf
+
+# This is a bit of a hack, we add salvator-x to avoid having to
+# bbappend various recipes to update COMPATIBLE_MACHINE. Ideally,
+# we would want the ordering salvator-x:<machine>, but that is
+# non-trivial to accomplish and not absolutely necessary for our
+# expected use.
+MACHINEOVERRIDES_append = ":salvator-x"
+
+# Reference hardware has USB3
+MACHINE_FEATURES_append = " usb3"
+
+KERNEL_DEVICETREE_append = " renesas/r8a7795-agl-refhw.dtb"
diff --git a/meta-agl-refhw-gen3/docs/ReferenceHW_Rcar_gen3.md b/meta-agl-refhw-gen3/docs/ReferenceHW_Rcar_gen3.md
index 9e826dc..92d3642 100644
--- a/meta-agl-refhw-gen3/docs/ReferenceHW_Rcar_gen3.md
+++ b/meta-agl-refhw-gen3/docs/ReferenceHW_Rcar_gen3.md
@@ -1,4 +1,4 @@
-# Reference Hardware Board
+# Reference Hardware Board
- [About](#about)
- [Difference to Salvator-XS When Flashing Firmware](#difference-to-salvator-xs-when-flashing-firmware)
@@ -42,6 +42,56 @@ using serial download.
Output the following image.
./AArch64_output/AArch64_Flash_writer_SCIF_DUMMY_CERT_E6300400_salvator-x.mot
+## How to build the Firmware
+
+1. In a temporary working directory, clone poky the poky repository and check out the dunfell branch:
+```
+ git clone git://git.yoctoproject.org/poky
+ cd poky
+ git checkout dunfell
+ ..
+```
+2. Clone the Renesas BSP and it's dependent layers:
+```
+ git clone https://github.com/renesas-rcar/meta-renesas
+ cd meta-renesas
+ git checkout dunfell-dev-4.14
+ cd ..
+ git clone git://git.openembedded.org/meta-openembedded
+ cd meta-openembedded
+ git checkout dunfell
+ cd ..
+```
+3. Clone the reference hardware BSP layer:
+```
+ git clone https://gerrit.automotivelinux.org/gerrit/AGL/meta-agl-refhw
+```
+4. Create a build environment:
+```
+ . ./poky/oe-init-build-env build
+```
+5. Add the layers to `conf/bblayers.conf`, the `BBLAYERS` variable definition should look like:
+```
+ BBLAYERS ?= " \
+ /home/user/workdir/poky/meta \
+ /home/user/workdir/poky/meta-poky \
+ /home/user/poky/meta-yocto-bsp \
+ /home/user/workdir/meta-openembedded/meta-oe \
+ /home/user/workdir/meta-openembedded/meta-python \
+ /home/user/workdir/meta-renesas/meta-rcar-gen3 \
+ /home/user/workdir/meta-agl-refhw/meta-agl-refhw-gen3 \
+ "
+```
+6. Add the machine setting to `conf/local.conf`, for example:
+```
+ echo MACHINE=agl-refhw-h3 >> conf/local.conf
+```
+7. Build the firmware:
+```
+ bitbake arm-trusted-firmware u-boot
+```
+8. Afterwards, the firmware files will be in the directory `tmp/deploy/images/agl-refhw-h3`.
+
## How to Flash Firmware
1. Connect reference hardware board to the development PC by using USB serial
@@ -129,10 +179,10 @@ Output the following image.
Name | Load address | eMMC partition | Flash address | Description
--------------------------------------|-----------------------|-----------------------|-----------------------|-----------------------------
bootparam_sa0-4x2g.srec | H'E6320000 | 1 | H'000000 | Boot parameter
- bl2-salvator-x-4x2g.srec | H'E6304000 | 1 | H'00001E | bl2 loader
+ bl2-agl-refhw-h3-4x2g.srec | H'E6304000 | 1 | H'00001E | bl2 loader
cert_header_sa6-4x2g.srec | H'E6320000 | 1 | H'000180 | Certification
- bl31-salvator-x-4x2g.srec | H'44000000 | 1 | H'000200 | bl3 loader
- tee-salvator-x.srec | H'44100000 | 1 | H'001000 | OP-Tee
+ bl31-agl-refhw-h3-4x2g.srec | H'44000000 | 1 | H'000200 | bl3 loader
+ tee-agl-refhw-h3.srec | H'44100000 | 1 | H'001000 | OP-Tee
u-boot-elf-salvator-xs-4x2g.srec | H'50000000 | 2 | H'000000 | U-boot
You can find these firmwares in the AGL build directory $AGL_TOP/build/tmp/deploy/images/salvator-x
diff --git a/meta-agl-refhw-gen3/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_%.bbappend b/meta-agl-refhw-gen3/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_%.bbappend
index 1fccf80..951a34f 100644
--- a/meta-agl-refhw-gen3/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_%.bbappend
+++ b/meta-agl-refhw-gen3/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_%.bbappend
@@ -1,4 +1,7 @@
-#FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}/:"
+# It is believed the eMMC configuration below makes the result AGL
+# reference hardware specific, mark it as such to try to prevent
+# unintended usage on other boards.
+COMPATIBLE_MACHINE = "agl-refhw-h3"
# There are hardware issues in using hyperflash. arm-trusted-firmware, optee and
# u-boot have to be stored into eMMC by using serial donwload.
@@ -6,20 +9,20 @@ EMMC_BOOT_OPTION = "RCAR_SA6_TYPE=1"
DDR_8G_OPTION= "RCAR_DRAM_LPDDR4_MEMCONF=1"
-ATFW_OPT_append_refhw = " ${EMMC_BOOT_OPTION} "
+ATFW_OPT_append_agl-refhw-h3 = " ${EMMC_BOOT_OPTION}"
# In arm-trusted-firmware-control.inc, a "extra_ipl_opt" task is appended to
# create firmware for 4x2g or 2x2g variation. it is supposed to use
# EXTRA_ATFW_OPT to customize the compiler opton.
#
-#EXTRA_ATFW_OPT_append_refhw = " ${EMMC_BOOT_OPTION} ${DDR_8G_OPTION} "
+#EXTRA_ATFW_OPT_append_agl-refhw-h3 = " ${EMMC_BOOT_OPTION} ${DDR_8G_OPTION}"
#
# Unfortunately in do_extra_ipl_opt() it use d.setVar() instead of d.appendVar()
# to setup EXTRA_ATFW_OPT variable which makes it impossible to customize it properly
# by others... Override it.
#
#
-do_ipl_opt_compile_refhw () {
+do_ipl_opt_compile_agl-refhw-h3 () {
oe_runmake distclean
oe_runmake bl2 bl31 dummytool PLAT=${PLATFORM} ${EXTRA_ATFW_OPT} ${ATFW_OPT_LOSSY} ${EMMC_BOOT_OPTION} ${DDR_8G_OPTION}
}
diff --git a/meta-agl-refhw-gen3/recipes-kernel/linux/files/0001-add-agl-refhw.patch b/meta-agl-refhw-gen3/recipes-kernel/linux/files/0001-add-agl-refhw.patch
new file mode 100644
index 0000000..d6bf869
--- /dev/null
+++ b/meta-agl-refhw-gen3/recipes-kernel/linux/files/0001-add-agl-refhw.patch
@@ -0,0 +1,1418 @@
+Add AGL reference hardware support
+
+Upstream-Status: pending
+
+Signed-off-by: Scott Murray <scott.murray@konsulko.com>
+
+---
+ arch/arm64/boot/dts/renesas/agl-refhw-common.dtsi | 912 ++++++++++++++++++++++
+ arch/arm64/boot/dts/renesas/r8a7795-agl-refhw.dts | 378 +++++++++
+ drivers/media/i2c/adv748x/adv748x-core.c | 48 +-
+ drivers/media/i2c/adv748x/adv748x.h | 12 +
+ 4 files changed, 1346 insertions(+), 4 deletions(-)
+
+diff --git a/arch/arm64/boot/dts/renesas/agl-refhw-common.dtsi b/arch/arm64/boot/dts/renesas/agl-refhw-common.dtsi
+new file mode 100644
+index 000000000000..a35cd24b27b9
+--- /dev/null
++++ b/arch/arm64/boot/dts/renesas/agl-refhw-common.dtsi
+@@ -0,0 +1,912 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Device Tree Source for common parts of AGL Reference Hardware board variants
++ *
++ * Copyright (C) 2015-2017 Renesas Electronics Corp.
++ * Copyright (C) 2020 Konsulko Group
++ */
++
++/*
++ * This file is derived from salvator-common.dtsi
++ *
++ * It is currently unclear if the modifications made are such that they could
++ * be done on top of salvator-common.dtsi to allow removing the duplication.
++ * It is likely that the common pieces with salvator-common.dtsi would need to
++ * be factored out into a new common file, which is perhaps hard to justify.
++ */
++
++/*
++ * SSI-AK4613
++ *
++ * This command is required when Playback/Capture
++ *
++ * amixer set "DVC Out" 100%
++ * amixer set "DVC In" 100%
++ *
++ * You can use Mute
++ *
++ * amixer set "DVC Out Mute" on
++ * amixer set "DVC In Mute" on
++ *
++ * You can use Volume Ramp
++ *
++ * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
++ * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
++ * amixer set "DVC Out Ramp" on
++ * aplay xxx.wav &
++ * amixer set "DVC Out" 80% // Volume Down
++ * amixer set "DVC Out" 100% // Volume Up
++ */
++
++#include <dt-bindings/gpio/gpio.h>
++
++/ {
++ aliases {
++ serial0 = &scif2;
++ serial1 = &scif1;
++ serial2 = &scif5;
++ serial3 = &hscif1;
++ serial4 = &hscif0;
++ serial5 = &hscif2;
++ ethernet0 = &avb;
++ };
++
++ chosen {
++ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
++ stdout-path = "serial0:115200n8";
++ };
++
++ audio_clkout: audio-clkout {
++ /*
++ * This is same as <&rcar_sound 0>
++ * but needed to avoid cs2000/rcar_sound probe dead-lock
++ */
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <12288000>;
++ };
++
++ avb-mch@ec5a0100 {
++ compatible = "renesas,avb-mch-gen3";
++ reg = <0 0xec5a0100 0 0x100>; /* ADG_AVB */
++ reg-name = "adg_avb";
++
++ clocks = <&cpg CPG_MOD 922>;
++ clock-names = "adg";
++ resets = <&cpg 922>;
++ };
++
++ hdmi0-in {
++ compatible = "hdmi-connector";
++ label = "HDMI0 IN";
++ type = "a";
++
++ port {
++ hdmi_in_con: endpoint {
++ remote-endpoint = <&adv7481_hdmi>;
++ };
++ };
++ };
++
++ hdmi2-in {
++ compatible = "hdmi-connector";
++ label = "HDMI2 IN";
++ type = "a";
++
++ port {
++ hdmi_in_con2: endpoint {
++ remote-endpoint = <&adv7481_hdmi2>;
++ };
++ };
++ };
++
++ reg_1p8v: regulator0 {
++ compatible = "regulator-fixed";
++ regulator-name = "fixed-1.8V";
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ reg_3p3v: regulator1 {
++ compatible = "regulator-fixed";
++ regulator-name = "fixed-3.3V";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ reg_12v: regulator2 {
++ compatible = "regulator-fixed";
++ regulator-name = "fixed-12V";
++ regulator-min-microvolt = <12000000>;
++ regulator-max-microvolt = <12000000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ sound_card: sound {
++ compatible = "audio-graph-card";
++
++ label = "rcar-sound";
++
++ dais = <&rsnd_port0>;
++ };
++
++ vcc_sdhi0: regulator-vcc-sdhi0 {
++ compatible = "regulator-fixed";
++
++ regulator-name = "SDHI0 Vcc";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ };
++
++ vccq_sdhi0: regulator-vccq-sdhi0 {
++ compatible = "regulator-gpio";
++
++ regulator-name = "SDHI0 VccQ";
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++
++ gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
++ gpios-states = <1>;
++ states = <3300000 1
++ 1800000 0>;
++ };
++
++ vcc_sdhi3: regulator-vcc-sdhi3 {
++ compatible = "regulator-fixed";
++
++ regulator-name = "SDHI3 Vcc";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
++ enable-active-high;
++ };
++
++ vccq_sdhi3: regulator-vccq-sdhi3 {
++ compatible = "regulator-gpio";
++
++ regulator-name = "SDHI3 VccQ";
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++
++ gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
++ gpios-states = <1>;
++ states = <3300000 1
++ 1800000 0>;
++ };
++
++ hdmi0-out {
++ compatible = "hdmi-connector";
++ label = "HDMI0 OUT";
++ type = "a";
++
++ port {
++ hdmi0_con: endpoint {
++ };
++ };
++ };
++
++ hdmi1-out {
++ compatible = "hdmi-connector";
++ label = "HDMI1 OUT";
++ type = "a";
++
++ port {
++ hdmi1_con: endpoint {
++ };
++ };
++ };
++
++ x12_clk: x12 {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <24576000>;
++ };
++
++ /* External DU dot clocks */
++ x21_clk: x21-clock {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <33000000>;
++ };
++
++ x22_clk: x22-clock {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <33000000>;
++ };
++
++ x23_clk: x23-clock {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <25000000>;
++ };
++};
++
++&a57_0 {
++ cpu-supply = <&dvfs>;
++};
++
++&audio_clk_a {
++ clock-frequency = <22579200>;
++};
++
++&avb {
++ pinctrl-0 = <&avb_pins>;
++ pinctrl-names = "default";
++ phy-handle = <&phy0>;
++ phy-mode = "rgmii-txid";
++ status = "okay";
++
++ phy0: ethernet-phy@0 {
++ rxc-skew-ps = <1500>;
++ reg = <0>;
++ interrupt-parent = <&gpio2>;
++ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
++ reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
++ };
++};
++
++&csi40 {
++ status = "okay";
++
++ ports {
++ port@0 {
++ reg = <0>;
++
++ csi40_in: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&adv7481_txa>;
++ };
++ };
++ };
++};
++
++&csi41 {
++ status = "okay";
++
++ ports {
++ port@0 {
++ reg = <0>;
++
++ csi41_in: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&adv7481_txa2>;
++ };
++ };
++ };
++};
++
++&du {
++ status = "okay";
++
++};
++
++&ehci0 {
++ dr_mode = "otg";
++ status = "okay";
++};
++
++&ehci1 {
++ status = "okay";
++};
++
++&extalr_clk {
++ clock-frequency = <32768>;
++};
++
++&hscif0 {
++ pinctrl-0 = <&hscif0_pins>;
++ pinctrl-names = "default";
++ uart-has-rtscts;
++
++ status = "okay";
++};
++
++&hscif1 {
++ pinctrl-0 = <&hscif1_pins>;
++ pinctrl-names = "default";
++
++ /* Please use exclusively to the scif1 node */
++ status = "okay";
++};
++
++&hscif2 {
++ pinctrl-0 = <&hscif2_pins>;
++ pinctrl-names = "default";
++
++ status = "okay";
++};
++
++&hsusb {
++ dr_mode = "otg";
++ status = "okay";
++};
++
++&i2c2 {
++ pinctrl-0 = <&i2c2_pins>;
++ pinctrl-names = "default";
++
++ status = "okay";
++
++ clock-frequency = <100000>;
++
++ video-receiver@70 {
++ compatible = "adi,adv7481";
++ reg = <0x70>;
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ interrupt-parent = <&gpio0>;
++ interrupt-names = "intrq1", "intrq3";
++ interrupts = <4 IRQ_TYPE_LEVEL_LOW>,
++ <5 IRQ_TYPE_LEVEL_LOW>;
++
++ port@8 {
++ reg = <8>;
++
++ adv7481_hdmi: endpoint {
++ remote-endpoint = <&hdmi_in_con>;
++ };
++ };
++
++ port@a {
++ reg = <10>;
++
++ adv7481_txa: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&csi40_in>;
++ };
++ };
++
++ };
++
++ video-receiver@71 {
++ compatible = "adi,adv7481";
++ reg = <0x71>;
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ interrupt-parent = <&gpio6>;
++ interrupt-names = "intrq1", "intrq3";
++ interrupts = <0 IRQ_TYPE_LEVEL_LOW>,
++ <1 IRQ_TYPE_LEVEL_LOW>;
++
++ port@8 {
++ reg = <8>;
++
++ adv7481_hdmi2: endpoint {
++ remote-endpoint = <&hdmi_in_con2>;
++ };
++ };
++
++ port@a {
++ reg = <10>;
++
++ adv7481_txa2: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&csi41_in>;
++ };
++ };
++ };
++
++ cs2000: clk_multiplier@4f {
++ #clock-cells = <0>;
++ compatible = "cirrus,cs2000-cp";
++ reg = <0x4f>;
++ clocks = <&audio_clkout>, <&x12_clk>;
++ clock-names = "clk_in", "ref_clk";
++
++ assigned-clocks = <&cs2000>;
++ assigned-clock-rates = <24576000>; /* 1/1 divide */
++ };
++};
++
++&i2c3 {
++ pinctrl-0 = <&i2c3_pins>;
++ pinctrl-names = "default";
++
++ status = "okay";
++
++ clock-frequency = <100000>;
++
++ asm330lhh@6a {
++ compatible = "st,asm330lhh";
++ reg = <0x6a>;
++
++ interrupt-names = "int1", "int2";
++ interrupts = <&gpio6 23 IRQ_TYPE_EDGE_RISING>,
++ <&gpio2 6 IRQ_TYPE_EDGE_RISING>;
++ };
++};
++
++&i2c4 {
++ status = "okay";
++
++ versaclock5: clock-generator@68 {
++ compatible = "idt,9fgv0841";
++ reg = <0x68>;
++ #clock-cells = <1>;
++ clocks = <&x23_clk>;
++ clock-names = "xin";
++ };
++};
++
++&i2c5 {
++ pinctrl-0 = <&i2c5_pins>;
++ pinctrl-names = "default";
++
++ status = "okay";
++
++ clock-frequency = <100000>;
++
++ ak4613: codec@10 {
++ compatible = "asahi-kasei,ak4613";
++ #sound-dai-cells = <0>;
++ reg = <0x10>;
++ clocks = <&rcar_sound 3>;
++
++ asahi-kasei,in1-single-end;
++ asahi-kasei,in2-single-end;
++ asahi-kasei,out1-single-end;
++ asahi-kasei,out2-single-end;
++ asahi-kasei,out3-single-end;
++ asahi-kasei,out4-single-end;
++ asahi-kasei,out5-single-end;
++ asahi-kasei,out6-single-end;
++
++ port {
++ ak4613_endpoint: endpoint {
++ remote-endpoint = <&rsnd_endpoint0>;
++ };
++ };
++ };
++};
++
++&i2c_dvfs {
++ status = "okay";
++
++ clock-frequency = <400000>;
++
++ pmic: pmic@30 {
++ pinctrl-0 = <&irq0_pins>;
++ pinctrl-names = "default";
++
++ compatible = "rohm,bd9571mwv";
++ reg = <0x30>;
++ interrupt-parent = <&intc_ex>;
++ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
++ interrupt-controller;
++ #interrupt-cells = <2>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ rohm,ddr-backup-power = <0xf>;
++ rohm,rstbmode-level;
++
++ regulators {
++ dvfs: dvfs {
++ regulator-name = "dvfs";
++ regulator-min-microvolt = <750000>;
++ regulator-max-microvolt = <1030000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++ };
++ };
++
++ eeprom@50 {
++ compatible = "rohm,br24t01", "atmel,24c01";
++ reg = <0x50>;
++ pagesize = <8>;
++ };
++};
++
++&ohci0 {
++ dr_mode = "otg";
++ status = "okay";
++};
++
++&ohci1 {
++ status = "okay";
++};
++
++&pcie_bus_clk {
++ clock-frequency = <100000000>;
++ status = "okay";
++};
++
++&pciec0 {
++ status = "okay";
++};
++
++&pciec1 {
++ status = "okay";
++};
++
++&canfd {
++ pinctrl-0 = <&canfd0_pins &canfd1_pins>;
++ pinctrl-names = "default";
++
++ status = "okay";
++
++ channel0 {
++ status = "okay";
++ };
++
++ channel1 {
++ status = "okay";
++ };
++};
++
++&pfc {
++ pinctrl-0 = <&scif_clk_pins>;
++ pinctrl-names = "default";
++
++ avb_pins: avb {
++ mux {
++ groups = "avb_link", "avb_mdio", "avb_mii";
++ function = "avb";
++ };
++
++ pins_mdio {
++ groups = "avb_mdio";
++ drive-strength = <24>;
++ };
++
++ pins_mii_tx {
++ pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
++ "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
++ drive-strength = <12>;
++ };
++ };
++
++ hscif0_pins: hscif0 {
++ groups = "hscif0_data", "hscif0_ctrl";
++ function = "hscif0";
++ };
++
++ hscif1_pins: hscif1 {
++ groups = "hscif1_data_a";
++ function = "hscif1";
++ };
++
++ hscif2_pins: hscif2 {
++ groups = "hscif2_data_c";
++ function = "hscif2";
++ };
++
++ i2c2_pins: i2c2 {
++ groups = "i2c2_a";
++ function = "i2c2";
++ };
++
++ i2c3_pins: i2c3 {
++ groups = "i2c3";
++ function = "i2c3";
++ };
++
++ i2c5_pins: i2c5 {
++ groups = "i2c5";
++ function = "i2c5";
++ };
++
++ irq0_pins: irq0 {
++ groups = "intc_ex_irq0";
++ function = "intc_ex";
++ };
++
++ scif1_pins: scif1 {
++ groups = "scif1_data_b";
++ function = "scif1";
++ };
++
++ scif2_pins: scif2 {
++ groups = "scif2_data_a";
++ function = "scif2";
++ };
++
++ scif5_pins: scif5 {
++ groups = "scif5_data_a";
++ function = "scif5";
++ };
++
++ scif_clk_pins: scif_clk {
++ groups = "scif_clk_a";
++ function = "scif_clk";
++ };
++
++ sdhi0_pins: sd0 {
++ groups = "sdhi0_data4", "sdhi0_ctrl";
++ function = "sdhi0";
++ power-source = <3300>;
++ };
++
++ sdhi0_pins_uhs: sd0_uhs {
++ groups = "sdhi0_data4", "sdhi0_ctrl";
++ function = "sdhi0";
++ power-source = <1800>;
++ };
++
++ sdhi2_pins: sd2 {
++ groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
++ function = "sdhi2";
++ power-source = <3300>;
++ };
++
++ sdhi2_pins_uhs: sd2_uhs {
++ groups = "sdhi2_data8", "sdhi2_ctrl", "sdhi2_ds";
++ function = "sdhi2";
++ power-source = <1800>;
++ };
++
++ sdhi3_pins: sd3 {
++ groups = "sdhi3_data4", "sdhi3_ctrl";
++ function = "sdhi3";
++ power-source = <3300>;
++ };
++
++ sdhi3_pins_uhs: sd3_uhs {
++ groups = "sdhi3_data4", "sdhi3_ctrl";
++ function = "sdhi3";
++ power-source = <1800>;
++ };
++
++ sound_pins: sound {
++ groups = "ssi349_ctrl", "ssi3_data", "ssi4_data";
++ function = "ssi";
++ };
++
++ sound_clk_pins: sound_clk {
++ groups = "audio_clk_a_a", "audio_clk_b_a",
++ "audio_clkout_a", "audio_clkout3_b";
++ function = "audio_clk";
++ };
++
++ usb0_pins: usb0 {
++ groups = "usb0";
++ function = "usb0";
++ };
++
++ usb1_pins: usb1 {
++ groups = "usb1";
++ function = "usb1";
++ };
++
++ usb30_pins: usb30 {
++ groups = "usb30", "usb30_ovc";
++ function = "usb30";
++ };
++
++ canfd0_pins: canfd0 {
++ groups = "canfd0_data_a";
++ function = "canfd0";
++ };
++
++ canfd1_pins: canfd1 {
++ groups = "canfd1_data";
++ function = "canfd1";
++ };
++};
++
++&rcar_sound {
++ pinctrl-0 = <&sound_pins &sound_clk_pins>;
++ pinctrl-names = "default";
++
++ /* Single DAI */
++ #sound-dai-cells = <0>;
++
++ /* audio_clkout0/1/2/3 */
++ #clock-cells = <1>;
++ clock-frequency = <12288000 11289600>;
++
++ status = "okay";
++
++ /* update <audio_clk_b> to <cs2000> */
++ clocks = <&cpg CPG_MOD 1005>,
++ <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
++ <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
++ <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
++ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
++ <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
++ <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
++ <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
++ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
++ <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
++ <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
++ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
++ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
++ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
++ <&audio_clk_a>, <&cs2000>,
++ <&audio_clk_c>,
++ <&cpg CPG_CORE CPG_AUDIO_CLK_I>;
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ rsnd_port0: port@0 {
++ reg = <0>;
++ rsnd_endpoint0: endpoint {
++ remote-endpoint = <&ak4613_endpoint>;
++
++ dai-format = "left_j";
++ bitclock-master = <&rsnd_endpoint0>;
++ frame-master = <&rsnd_endpoint0>;
++
++ playback = <&ssi3>; //ssi0 -> ssi3
++ capture = <&ssi4>; //ssi1 -> ssi4
++ };
++ };
++ };
++};
++
++&rwdt {
++ timeout-sec = <60>;
++ status = "okay";
++};
++
++&scif1 {
++ pinctrl-0 = <&scif1_pins>;
++ pinctrl-names = "default";
++
++ uart-has-rtscts;
++ /* Please use exclusively to the hscif1 node */
++ status = "okay";
++};
++
++&scif2 {
++ pinctrl-0 = <&scif2_pins>;
++ pinctrl-names = "default";
++
++ status = "okay";
++};
++
++&scif5 {
++ pinctrl-0 = <&scif5_pins>;
++ pinctrl-names = "default";
++
++ status = "okay";
++};
++
++&scif_clk {
++ clock-frequency = <14745600>;
++};
++
++&sdhi0 {
++ pinctrl-0 = <&sdhi0_pins>;
++ pinctrl-1 = <&sdhi0_pins_uhs>;
++ pinctrl-names = "default", "state_uhs";
++
++ vmmc-supply = <&vcc_sdhi0>;
++ vqmmc-supply = <&vccq_sdhi0>;
++ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
++ wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
++ bus-width = <4>;
++ sd-uhs-sdr50;
++ sd-uhs-sdr104;
++ status = "okay";
++};
++
++&sdhi2 {
++ /* used for on-board 8bit eMMC */
++ pinctrl-0 = <&sdhi2_pins>;
++ pinctrl-1 = <&sdhi2_pins_uhs>;
++ pinctrl-names = "default", "state_uhs";
++
++ iommus = <&ipmmu_ds1 34>;
++
++ vmmc-supply = <&reg_3p3v>;
++ vqmmc-supply = <&reg_1p8v>;
++ bus-width = <8>;
++ mmc-hs200-1_8v;
++ mmc-hs400-1_8v;
++ no-sd;
++ no-sdio;
++ non-removable;
++ fixed-emmc-driver-type = <1>;
++ status = "okay";
++};
++
++&sdhi3 {
++ pinctrl-0 = <&sdhi3_pins>;
++ pinctrl-1 = <&sdhi3_pins_uhs>;
++ pinctrl-names = "default", "state_uhs";
++
++ vmmc-supply = <&vcc_sdhi3>;
++ vqmmc-supply = <&vccq_sdhi3>;
++ cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
++ wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
++ bus-width = <4>;
++ sd-uhs-sdr50;
++ sd-uhs-sdr104;
++ status = "okay";
++};
++
++&ssi4 {
++ shared-pin;
++};
++
++&usb_extal_clk {
++ clock-frequency = <50000000>;
++};
++
++&usb2_phy0 {
++ pinctrl-0 = <&usb0_pins>;
++ pinctrl-names = "default";
++
++ status = "okay";
++};
++
++&usb2_phy1 {
++ pinctrl-0 = <&usb1_pins>;
++ pinctrl-names = "default";
++
++ status = "okay";
++};
++
++&usb3_peri0 {
++ phys = <&usb3_phy0>;
++ phy-names = "usb";
++
++ status = "okay";
++};
++
++&usb3_phy0 {
++ status = "okay";
++};
++
++&usb3s0_clk {
++ clock-frequency = <100000000>;
++};
++
++&vin0 {
++ status = "okay";
++};
++
++&vin1 {
++ status = "okay";
++};
++
++&vin2 {
++ status = "okay";
++};
++
++&vin3 {
++ status = "okay";
++};
++
++&vin4 {
++ status = "okay";
++};
++
++&vin5 {
++ status = "okay";
++};
++
++&vin6 {
++ status = "okay";
++};
++
++&vin7 {
++ status = "okay";
++};
++
++&xhci0 {
++ pinctrl-0 = <&usb30_pins>;
++ pinctrl-names = "default";
++
++ status = "okay";
++};
+diff --git a/arch/arm64/boot/dts/renesas/r8a7795-agl-refhw.dts b/arch/arm64/boot/dts/renesas/r8a7795-agl-refhw.dts
+new file mode 100644
+index 000000000000..0a63d2e7a64b
+--- /dev/null
++++ b/arch/arm64/boot/dts/renesas/r8a7795-agl-refhw.dts
+@@ -0,0 +1,378 @@
++/*
++ * Device Tree Source for the AGL reference hardware board with R-Car H3 ES3.0
++ *
++ * Copyright (C) 2019 Panasonic Corp.
++ * Copyright (C) 2020 Konsulko Group
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2. This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++/*
++ * This file is for the most part derived from:
++ *
++ * - r8a7795-salvator-xs-4x2g.dts
++ * - r8a7795-salvator-xs.dts
++ * - salvator-xs.dtsi
++ *
++ * With agl-refhw-common.dtsi replacing (and derived from) salvator-common.dtsi.
++ */
++
++/dts-v1/;
++#include "r8a7795.dtsi"
++#include "agl-refhw-common.dtsi"
++
++/ {
++ model = "AGL Reference Hardware based on r8a7795 ES3.0+ with 8GiB (4 x 2 GiB)";
++ compatible = "agl,refhw-h3", "renesas,r8a7795";
++
++ memory@48000000 {
++ device_type = "memory";
++ /* first 128MB is reserved for secure area. */
++ reg = <0x0 0x48000000 0x0 0x78000000>;
++ };
++
++ memory@500000000 {
++ device_type = "memory";
++ reg = <0x5 0x00000000 0x0 0x80000000>;
++ };
++
++ memory@600000000 {
++ device_type = "memory";
++ reg = <0x6 0x00000000 0x0 0x80000000>;
++ };
++
++ memory@700000000 {
++ device_type = "memory";
++ reg = <0x7 0x00000000 0x0 0x80000000>;
++ };
++
++ reserved-memory {
++ #address-cells = <2>;
++ #size-cells = <2>;
++ ranges;
++
++ /* device specific region for Lossy Decompression */
++ lossy_decompress: linux,lossy_decompress@54000000 {
++ no-map;
++ reg = <0x00000000 0x54000000 0x0 0x03000000>;
++ };
++
++ /* For Audio DSP */
++ adsp_reserved: linux,adsp@57000000 {
++ compatible = "shared-dma-pool";
++ reusable;
++ reg = <0x00000000 0x57000000 0x0 0x01000000>;
++ };
++
++ /* global autoconfigured region for contiguous allocations */
++ linux,cma@58000000 {
++ compatible = "shared-dma-pool";
++ reusable;
++ reg = <0x00000000 0x58000000 0x0 0x18000000>;
++ linux,cma-default;
++ };
++
++ /* device specific region for contiguous allocations */
++ mmp_reserved: linux,multimedia@70000000 {
++ compatible = "shared-dma-pool";
++ reusable;
++ reg = <0x00000000 0x70000000 0x0 0x10000000>;
++ };
++ };
++
++ mmngr {
++ compatible = "renesas,mmngr";
++ memory-region = <&mmp_reserved>, <&lossy_decompress>;
++ };
++
++ mmngrbuf {
++ compatible = "renesas,mmngrbuf";
++ };
++
++ vspm_if {
++ compatible = "renesas,vspm_if";
++ };
++
++ vga {
++ port {
++ vga_in: endpoint {
++ /delete-property/remote-endpoint;
++ };
++ };
++ };
++
++ vga-encoder {
++ ports {
++ port@0 {
++ adv7123_in: endpoint {
++ /delete-property/remote-endpoint;
++ };
++ };
++
++ port@1 {
++ adv7123_out: endpoint {
++ /delete-property/remote-endpoint;
++ };
++ };
++ };
++ };
++
++};
++
++&adsp {
++ status = "okay";
++ memory-region = <&adsp_reserved>;
++};
++
++&du {
++ clocks = <&cpg CPG_MOD 724>,
++ <&cpg CPG_MOD 723>,
++ <&cpg CPG_MOD 722>,
++ <&cpg CPG_MOD 721>,
++ <&versaclock6 1>,
++ <&x21_clk>,
++ <&x22_clk>,
++ <&versaclock6 2>;
++ clock-names = "du.0", "du.1", "du.2", "du.3",
++ "dclkin.0", "dclkin.1", "dclkin.2", "dclkin.3";
++};
++
++&ehci2 {
++ status = "okay";
++};
++
++&ehci3 {
++ dr_mode = "otg";
++ status = "okay";
++};
++
++&hsusb3 {
++ dr_mode = "otg";
++ status = "okay";
++};
++
++&sound_card {
++ dais = <&rsnd_port0 /* ak4613 */
++ &rsnd_port1 /* HDMI0 */
++ &rsnd_port2>; /* HDMI1 */
++};
++
++&hdmi0 {
++ status = "okay";
++
++ ports {
++ port@1 {
++ reg = <1>;
++ rcar_dw_hdmi0_out: endpoint {
++ remote-endpoint = <&hdmi0_con>;
++ };
++ };
++ port@2 {
++ reg = <2>;
++ dw_hdmi0_snd_in: endpoint {
++ remote-endpoint = <&rsnd_endpoint1>;
++ };
++ };
++ };
++};
++
++&hdmi0_con {
++ remote-endpoint = <&rcar_dw_hdmi0_out>;
++};
++
++&hdmi1 {
++ status = "okay";
++
++ ports {
++ port@1 {
++ reg = <1>;
++ rcar_dw_hdmi1_out: endpoint {
++ remote-endpoint = <&hdmi1_con>;
++ };
++ };
++ port@2 {
++ reg = <2>;
++ dw_hdmi1_snd_in: endpoint {
++ remote-endpoint = <&rsnd_endpoint2>;
++ };
++ };
++ };
++};
++
++&hdmi1_con {
++ remote-endpoint = <&rcar_dw_hdmi1_out>;
++};
++
++&ohci2 {
++ status = "okay";
++};
++
++&ohci3 {
++ dr_mode = "otg";
++ status = "okay";
++};
++
++&rcar_sound {
++ ports {
++ /* rsnd_port0 is on salvator-common */
++ rsnd_port1: port@1 {
++ reg = <1>;
++ rsnd_endpoint1: endpoint {
++ remote-endpoint = <&dw_hdmi0_snd_in>;
++
++ dai-format = "i2s";
++ bitclock-master = <&rsnd_endpoint1>;
++ frame-master = <&rsnd_endpoint1>;
++
++ playback = <&ssi2>;
++ };
++ };
++ rsnd_port2: port@2 {
++ reg = <2>;
++ rsnd_endpoint2: endpoint {
++ remote-endpoint = <&dw_hdmi1_snd_in>;
++
++ dai-format = "i2s";
++ bitclock-master = <&rsnd_endpoint2>;
++ frame-master = <&rsnd_endpoint2>;
++
++ playback = <&ssi3>;
++ };
++ };
++ };
++};
++
++&pfc {
++ usb2_pins: usb2 {
++ groups = "usb2", "usb2_ovc";
++ function = "usb2";
++ };
++
++ /*
++ * - On Salvator-X[S], GP6_3[01] are connected to ADV7482 as irq pins
++ * (when SW31 is the default setting on Salvator-XS).
++ * - If SW31 is the default setting, you cannot use USB2.0 ch3 on
++ * r8a7795 with Salvator-XS.
++ * Hence the SW31 setting must be changed like 2) below.
++ * 1) Default setting of SW31: ON-ON-OFF-OFF-OFF-OFF:
++ * - Connect GP6_3[01] to ADV7842.
++ * 2) Changed setting of SW31: OFF-OFF-ON-ON-ON-ON:
++ * - Connect GP6_3[01] to BD082065 (USB2.0 ch3's host power).
++ * - Connect GP6_{04,21} to ADV7842.
++ */
++ usb2_ch3_pins: usb2_ch3 {
++ groups = "usb2_ch3";
++ function = "usb2_ch3";
++ };
++};
++
++&usb2_phy2 {
++ pinctrl-0 = <&usb2_pins>;
++ pinctrl-names = "default";
++
++ status = "okay";
++};
++
++&usb2_phy3 {
++ pinctrl-0 = <&usb2_ch3_pins>;
++ pinctrl-names = "default";
++
++ status = "okay";
++};
++
++&vspbc {
++ status = "okay";
++};
++
++&vspbd {
++ status = "okay";
++};
++
++&vspi0 {
++ status = "okay";
++};
++
++&vspi1 {
++ status = "okay";
++};
++
++/* End r8a7795-salvator-xs.dts content */
++
++
++/* Start r8a7795-salvator-xs-4x2g.dts content */
++
++&pciec0 {
++ /* Map all possible DDR as inbound ranges */
++ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
++};
++
++&pciec1 {
++ /* Map all possible DDR as inbound ranges */
++ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
++};
++
++/* End r8a7795-salvator-xs-4x2g.dts content */
++
++
++/* Start salvator-xs.dts content */
++
++&extal_clk {
++ clock-frequency = <16640000>;
++};
++
++&i2c4 {
++ clock-frequency = <400000>;
++
++ versaclock6: clock-generator@6a {
++ compatible = "idt,5p49v6901";
++ reg = <0x6a>;
++ #clock-cells = <1>;
++ clocks = <&x23_clk>;
++ clock-names = "xin";
++ };
++};
++
++/* End salvator-xs.dts content */
++
++
++/* Start reference hardware specific tweaks */
++
++&du {
++ ports {
++ port@0 {
++ endpoint {
++ /delete-property/remote-endpoint;
++ };
++ };
++
++ port@3 {
++ endpoint {
++ /delete-property/remote-endpoint;
++ };
++ };
++ };
++};
++
++&lvds0 {
++ status = "disabled";
++};
++
++&pwm1 {
++ status = "disabled";
++};
++
++&scif_clk {
++ clock-frequency = <0>;
++};
++
++&sdhi0 {
++ /delete-property/ wp-gpios;
++ non-removable;
++};
++
++&sdhi3 {
++ /delete-property/ wp-gpios;
++ non-removable;
++};
+diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c
+index da8f0621a10b..c2b37f70f711 100644
+--- a/drivers/media/i2c/adv748x/adv748x-core.c
++++ b/drivers/media/i2c/adv748x/adv748x-core.c
+@@ -165,6 +165,21 @@ static int adv748x_i2c_addresses[ADV748X_PAGE_MAX] = {
+ ADV748X_I2C_TXA,
+ };
+
++/* Default addresses for the I2C pages 0x71*/
++static int adv748x_i2c_addresses2[ADV748X_PAGE_MAX] = {
++ ADV748X_I2C_IO2,
++ ADV748X_I2C_DPLL2,
++ ADV748X_I2C_CP2,
++ ADV748X_I2C_HDMI2,
++ ADV748X_I2C_EDID2,
++ ADV748X_I2C_REPEATER2,
++ ADV748X_I2C_INFOFRAME2,
++ ADV748X_I2C_CEC2,
++ ADV748X_I2C_SDP2,
++ ADV748X_I2C_TXB2,
++ ADV748X_I2C_TXA2,
++};
++
+ static int adv748x_read_check(struct adv748x_state *state,
+ int client_page, u8 reg)
+ {
+@@ -238,9 +253,16 @@ static int adv748x_initialise_clients(struct adv748x_state *state)
+ int ret;
+
+ for (i = ADV748X_PAGE_DPLL; i < ADV748X_PAGE_MAX; ++i) {
+- state->i2c_clients[i] =
+- adv748x_dummy_client(state, adv748x_i2c_addresses[i],
+- ADV748X_IO_SLAVE_ADDR_BASE + i);
++ if((state->client->addr << 1) == 0xe0) {
++ state->i2c_clients[i] =
++ adv748x_dummy_client(state, adv748x_i2c_addresses[i],
++ ADV748X_IO_SLAVE_ADDR_BASE + i);
++ } else {
++ state->i2c_clients[i] =
++ adv748x_dummy_client(state, adv748x_i2c_addresses2[i],
++ ADV748X_IO_SLAVE_ADDR_BASE + i);
++ }
++
+ if (state->i2c_clients[i] == NULL) {
+ adv_err(state, "failed to create i2c client %u\n", i);
+ return -ENOMEM;
+@@ -508,6 +530,20 @@ static const struct adv748x_reg_value adv748x_set_slave_address[] = {
+ {ADV748X_PAGE_EOR, 0xff, 0xff} /* End of register table */
+ };
+
++static const struct adv748x_reg_value adv748x_set_slave_address2[] = {
++ {ADV748X_PAGE_IO, 0xf3, ADV748X_I2C_DPLL2 << 1},
++ {ADV748X_PAGE_IO, 0xf4, ADV748X_I2C_CP2 << 1},
++ {ADV748X_PAGE_IO, 0xf5, ADV748X_I2C_HDMI2 << 1},
++ {ADV748X_PAGE_IO, 0xf6, ADV748X_I2C_EDID2 << 1},
++ {ADV748X_PAGE_IO, 0xf7, ADV748X_I2C_REPEATER2 << 1},
++ {ADV748X_PAGE_IO, 0xf8, ADV748X_I2C_INFOFRAME2 << 1},
++ {ADV748X_PAGE_IO, 0xfa, ADV748X_I2C_CEC2 << 1},
++ {ADV748X_PAGE_IO, 0xfb, ADV748X_I2C_SDP2 << 1},
++ {ADV748X_PAGE_IO, 0xfc, ADV748X_I2C_TXB2 << 1},
++ {ADV748X_PAGE_IO, 0xfd, ADV748X_I2C_TXA2 << 1},
++ {ADV748X_PAGE_EOR, 0xff, 0xff} /* End of register table */
++};
++
+ /* Supported Formats For Script Below */
+ /* - 01-29 HDMI to MIPI TxA CSI 4-Lane - RGB888: */
+ static const struct adv748x_reg_value adv748x_init_txa_4lane[] = {
+@@ -683,7 +719,11 @@ static int adv748x_reset(struct adv748x_state *state)
+ if (ret < 0)
+ return ret;
+
+- ret = adv748x_write_regs(state, adv748x_set_slave_address);
++ if((state->client->addr << 1) == 0xe0) {
++ ret = adv748x_write_regs(state, adv748x_set_slave_address); //i2c address 0x70
++ } else {
++ ret = adv748x_write_regs(state, adv748x_set_slave_address2); //i2c address 0x71
++ }
+ if (ret < 0)
+ return ret;
+
+diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h
+index fb30bfade946..ac50a9e41b08 100644
+--- a/drivers/media/i2c/adv748x/adv748x.h
++++ b/drivers/media/i2c/adv748x/adv748x.h
+@@ -40,6 +40,18 @@
+ #define ADV748X_I2C_TXB 0x48 /* CSI-TXB Map */
+ #define ADV748X_I2C_TXA 0x4a /* CSI-TXA Map */
+
++#define ADV748X_I2C_IO2 0x71 /* IO Map */
++#define ADV748X_I2C_DPLL2 0x27 /* DPLL Map */
++#define ADV748X_I2C_CP2 0x23 /* CP Map */
++#define ADV748X_I2C_HDMI2 0x35 /* HDMI Map */
++#define ADV748X_I2C_EDID2 0x37 /* EDID Map */
++#define ADV748X_I2C_REPEATER2 0x33 /* HDMI RX Repeater Map */
++#define ADV748X_I2C_INFOFRAME2 0x30 /* HDMI RX InfoFrame Map */
++#define ADV748X_I2C_CEC2 0x42 /* CEC Map */
++#define ADV748X_I2C_SDP2 0x78 /* SDP Map */
++#define ADV748X_I2C_TXB2 0x49 /* CSI-TXB Map */
++#define ADV748X_I2C_TXA2 0x4b /* CSI-TXA Map */
++
+ enum adv748x_page {
+ ADV748X_PAGE_IO,
+ ADV748X_PAGE_DPLL,
diff --git a/meta-agl-refhw-gen3/recipes-kernel/linux/files/0001-create-r8a7795-usb-ovc-pinmux-groups.patch b/meta-agl-refhw-gen3/recipes-kernel/linux/files/0001-create-r8a7795-usb-ovc-pinmux-groups.patch
new file mode 100644
index 0000000..da49e7f
--- /dev/null
+++ b/meta-agl-refhw-gen3/recipes-kernel/linux/files/0001-create-r8a7795-usb-ovc-pinmux-groups.patch
@@ -0,0 +1,410 @@
+Create r8a7795 USB OVC pin groups
+
+Split the r8a7795 USB pin groups to create separate groups for the
+OVC pins. This is required for the AGL reference hardware boards,
+which use some of the OVC pins in other pinmux modes.
+
+Upstream-Status: pending
+
+Signed-off-by: Scott Murray <scott.murray@konsulko.com>
+
+---
+ .../boot/dts/renesas/r8a7795-es1-salvator-x.dts | 2 +-
+ arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 2 +-
+ .../arm64/boot/dts/renesas/r8a7795-salvator-xs.dts | 4 +-
+ arch/arm64/boot/dts/renesas/salvator-common.dtsi | 6 +-
+ arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 2 +-
+ arch/arm64/boot/dts/renesas/ulcb.dtsi | 2 +-
+ drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c | 75 +++++++++++++++++-----
+ drivers/pinctrl/sh-pfc/pfc-r8a7795.c | 75 +++++++++++++++++-----
+ 8 files changed, 129 insertions(+), 39 deletions(-)
+
+diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts
+index 5c3935ef4fb9..07d3f03274e3 100644
+--- a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts
++++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts
+@@ -202,7 +202,7 @@
+
+ &pfc {
+ usb2_pins: usb2 {
+- groups = "usb2";
++ groups = "usb2", "usb2_ovc";
+ function = "usb2";
+ };
+ };
+diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+index 6928afbd8e06..9c229b1bbb59 100644
+--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
++++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+@@ -202,7 +202,7 @@
+
+ &pfc {
+ usb2_pins: usb2 {
+- groups = "usb2";
++ groups = "usb2", "usb2_ovc";
+ function = "usb2";
+ };
+ };
+diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
+index 498f78875dbd..abd1d480292e 100644
+--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
++++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
+@@ -217,7 +217,7 @@
+
+ &pfc {
+ usb2_pins: usb2 {
+- groups = "usb2";
++ groups = "usb2", "usb2_ovc";
+ function = "usb2";
+ };
+
+@@ -234,7 +234,7 @@
+ * - Connect GP6_{04,21} to ADV7842.
+ */
+ usb2_ch3_pins: usb2_ch3 {
+- groups = "usb2_ch3";
++ groups = "usb2_ch3", "usb2_ch3_ovc";
+ function = "usb2_ch3";
+ };
+ };
+diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+index 878ed7caca77..a9e2d0a02fe1 100644
+--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
++++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+@@ -690,13 +690,13 @@
+ };
+
+ usb0_pins: usb0 {
+- groups = "usb0";
++ groups = "usb0", "usb0_ovc";
+ function = "usb0";
+ };
+
+ usb1_pins: usb1 {
+ mux {
+- groups = "usb1";
++ groups = "usb1", "usb1_ovc";
+ function = "usb1";
+ };
+
+@@ -712,7 +712,7 @@
+ };
+
+ usb30_pins: usb30 {
+- groups = "usb30";
++ groups = "usb30", "usb30_ovc";
+ function = "usb30";
+ };
+ };
+diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+index 1b316d79df88..9d44b5ef4f63 100644
+--- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
++++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
+@@ -170,7 +170,7 @@
+ };
+
+ usb0_pins: usb0 {
+- groups = "usb0";
++ groups = "usb0", "usb0_ovc";
+ function = "usb0";
+ };
+ };
+diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi
+index b60fd45f0a17..6f054ab8e611 100644
+--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
++++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
+@@ -366,7 +366,7 @@
+ };
+
+ usb1_pins: usb1 {
+- groups = "usb1";
++ groups = "usb1", "usb1_ovc";
+ function = "usb1";
+ };
+ };
+diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c b/drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c
+index 9f302f60297f..55f99fe4d8ac 100644
+--- a/drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c
++++ b/drivers/pinctrl/sh-pfc/pfc-r8a7795-es1.c
+@@ -3822,44 +3822,79 @@ static const unsigned int tmu_tclk2_b_mux[] = {
+
+ /* - USB0 ------------------------------------------------------------------- */
+ static const unsigned int usb0_pins[] = {
+- /* PWEN, OVC */
+- RCAR_GP_PIN(6, 24), RCAR_GP_PIN(6, 25),
++ /* PWEN */
++ RCAR_GP_PIN(6, 24),
+ };
+ static const unsigned int usb0_mux[] = {
+- USB0_PWEN_MARK, USB0_OVC_MARK,
++ USB0_PWEN_MARK,
++};
++static const unsigned int usb0_ovc_pins[] = {
++ /* OVC */
++ RCAR_GP_PIN(6, 25),
++};
++static const unsigned int usb0_ovc_mux[] = {
++ USB0_OVC_MARK,
+ };
+ /* - USB1 ------------------------------------------------------------------- */
+ static const unsigned int usb1_pins[] = {
+- /* PWEN, OVC */
+- RCAR_GP_PIN(6, 26), RCAR_GP_PIN(6, 27),
++ /* PWEN */
++ RCAR_GP_PIN(6, 26),
+ };
+ static const unsigned int usb1_mux[] = {
+- USB1_PWEN_MARK, USB1_OVC_MARK,
++ USB1_PWEN_MARK,
++};
++static const unsigned int usb1_ovc_pins[] = {
++ /* OVC */
++ RCAR_GP_PIN(6, 27),
++};
++static const unsigned int usb1_ovc_mux[] = {
++ USB1_OVC_MARK,
+ };
+ /* - USB2 ------------------------------------------------------------------- */
+ static const unsigned int usb2_pins[] = {
+- /* PWEN, OVC */
+- RCAR_GP_PIN(6, 14), RCAR_GP_PIN(6, 15),
++ /* PWEN */
++ RCAR_GP_PIN(6, 14),
+ };
+ static const unsigned int usb2_mux[] = {
+- USB2_PWEN_MARK, USB2_OVC_MARK,
++ USB2_PWEN_MARK,
++};
++static const unsigned int usb2_ovc_pins[] = {
++ /* OVC */
++ RCAR_GP_PIN(6, 15),
++};
++static const unsigned int usb2_ovc_mux[] = {
++ USB2_OVC_MARK,
+ };
+
+ /* - USB30 ------------------------------------------------------------------ */
+ static const unsigned int usb30_pins[] = {
+- /* PWEN, OVC */
+- RCAR_GP_PIN(6, 28), RCAR_GP_PIN(6, 29),
++ /* PWEN */
++ RCAR_GP_PIN(6, 28),
+ };
+ static const unsigned int usb30_mux[] = {
+- USB30_PWEN_MARK, USB30_OVC_MARK,
++ USB30_PWEN_MARK,
++};
++static const unsigned int usb30_ovc_pins[] = {
++ /* OVC */
++ RCAR_GP_PIN(6, 29),
++};
++static const unsigned int usb30_ovc_mux[] = {
++ USB30_OVC_MARK,
+ };
+ /* - USB31 ------------------------------------------------------------------ */
+ static const unsigned int usb31_pins[] = {
+- /* PWEN, OVC */
+- RCAR_GP_PIN(6, 30), RCAR_GP_PIN(6, 31),
++ /* PWEN */
++ RCAR_GP_PIN(6, 30),
+ };
+ static const unsigned int usb31_mux[] = {
+- USB31_PWEN_MARK, USB31_OVC_MARK,
++ USB31_PWEN_MARK,
++};
++static const unsigned int usb31_ovc_pins[] = {
++ /* OVC */
++ RCAR_GP_PIN(6, 31),
++};
++static const unsigned int usb31_ovc_mux[] = {
++ USB31_OVC_MARK,
+ };
+
+ /* - VIN4 ------------------------------------------------------------------- */
+@@ -4486,10 +4521,15 @@ static const struct sh_pfc_pin_group pinmux_groups[] = {
+ SH_PFC_PIN_GROUP(tmu_tclk2_a),
+ SH_PFC_PIN_GROUP(tmu_tclk2_b),
+ SH_PFC_PIN_GROUP(usb0),
++ SH_PFC_PIN_GROUP(usb0_ovc),
+ SH_PFC_PIN_GROUP(usb1),
++ SH_PFC_PIN_GROUP(usb1_ovc),
+ SH_PFC_PIN_GROUP(usb2),
++ SH_PFC_PIN_GROUP(usb2_ovc),
+ SH_PFC_PIN_GROUP(usb30),
++ SH_PFC_PIN_GROUP(usb30_ovc),
+ SH_PFC_PIN_GROUP(usb31),
++ SH_PFC_PIN_GROUP(usb31_ovc),
+ SH_PFC_PIN_GROUP(vin4_data8_a),
+ SH_PFC_PIN_GROUP(vin4_data16_a),
+ SH_PFC_PIN_GROUP(vin4_data18_a),
+@@ -4977,22 +5017,27 @@ static const char * const tmu_groups[] = {
+
+ static const char * const usb0_groups[] = {
+ "usb0",
++ "usb0_ovc",
+ };
+
+ static const char * const usb1_groups[] = {
+ "usb1",
++ "usb1_ovc",
+ };
+
+ static const char * const usb2_groups[] = {
+ "usb2",
++ "usb2_ovc",
+ };
+
+ static const char * const usb30_groups[] = {
+ "usb30",
++ "usb30_ovc",
+ };
+
+ static const char * const usb31_groups[] = {
+ "usb31",
++ "usb31_ovc",
+ };
+
+ static const char * const vin4_groups[] = {
+diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
+index 3ebe8deb24d6..745f93884fe1 100644
+--- a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
++++ b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
+@@ -3911,44 +3911,79 @@ static const unsigned int tmu_tclk2_b_mux[] = {
+
+ /* - USB0 ------------------------------------------------------------------- */
+ static const unsigned int usb0_pins[] = {
+- /* PWEN, OVC */
+- RCAR_GP_PIN(6, 24), RCAR_GP_PIN(6, 25),
++ /* PWEN */
++ RCAR_GP_PIN(6, 24),
+ };
+ static const unsigned int usb0_mux[] = {
+- USB0_PWEN_MARK, USB0_OVC_MARK,
++ USB0_PWEN_MARK,
++};
++static const unsigned int usb0_ovc_pins[] = {
++ /* OVC */
++ RCAR_GP_PIN(6, 25),
++};
++static const unsigned int usb0_ovc_mux[] = {
++ USB0_OVC_MARK,
+ };
+ /* - USB1 ------------------------------------------------------------------- */
+ static const unsigned int usb1_pins[] = {
+- /* PWEN, OVC */
+- RCAR_GP_PIN(6, 26), RCAR_GP_PIN(6, 27),
++ /* PWEN */
++ RCAR_GP_PIN(6, 26),
+ };
+ static const unsigned int usb1_mux[] = {
+- USB1_PWEN_MARK, USB1_OVC_MARK,
++ USB1_PWEN_MARK,
++};
++static const unsigned int usb1_ovc_pins[] = {
++ /* OVC */
++ RCAR_GP_PIN(6, 27),
++};
++static const unsigned int usb1_ovc_mux[] = {
++ USB1_OVC_MARK,
+ };
+ /* - USB2 ------------------------------------------------------------------- */
+ static const unsigned int usb2_pins[] = {
+- /* PWEN, OVC */
+- RCAR_GP_PIN(6, 14), RCAR_GP_PIN(6, 15),
++ /* PWEN */
++ RCAR_GP_PIN(6, 14),
+ };
+ static const unsigned int usb2_mux[] = {
+- USB2_PWEN_MARK, USB2_OVC_MARK,
++ USB2_PWEN_MARK,
++};
++static const unsigned int usb2_ovc_pins[] = {
++ /* OVC */
++ RCAR_GP_PIN(6, 15),
++};
++static const unsigned int usb2_ovc_mux[] = {
++ USB2_OVC_MARK,
+ };
+ /* - USB2_CH3 --------------------------------------------------------------- */
+ static const unsigned int usb2_ch3_pins[] = {
+- /* PWEN, OVC */
+- RCAR_GP_PIN(6, 30), RCAR_GP_PIN(6, 31),
++ /* PWEN */
++ RCAR_GP_PIN(6, 30),
+ };
+ static const unsigned int usb2_ch3_mux[] = {
+- USB2_CH3_PWEN_MARK, USB2_CH3_OVC_MARK,
++ USB2_CH3_PWEN_MARK,
++};
++static const unsigned int usb2_ch3_ovc_pins[] = {
++ /* OVC */
++ RCAR_GP_PIN(6, 31),
++};
++static const unsigned int usb2_ch3_ovc_mux[] = {
++ USB2_CH3_OVC_MARK,
+ };
+
+ /* - USB30 ------------------------------------------------------------------ */
+ static const unsigned int usb30_pins[] = {
+- /* PWEN, OVC */
+- RCAR_GP_PIN(6, 28), RCAR_GP_PIN(6, 29),
++ /* PWEN */
++ RCAR_GP_PIN(6, 28),
+ };
+ static const unsigned int usb30_mux[] = {
+- USB30_PWEN_MARK, USB30_OVC_MARK,
++ USB30_PWEN_MARK,
++};
++static const unsigned int usb30_ovc_pins[] = {
++ /* OVC */
++ RCAR_GP_PIN(6, 29),
++};
++static const unsigned int usb30_ovc_mux[] = {
++ USB30_OVC_MARK,
+ };
+
+ /* - VIN4 ------------------------------------------------------------------- */
+@@ -4528,10 +4563,15 @@ static const struct sh_pfc_pin_group pinmux_groups[] = {
+ SH_PFC_PIN_GROUP(tmu_tclk2_a),
+ SH_PFC_PIN_GROUP(tmu_tclk2_b),
+ SH_PFC_PIN_GROUP(usb0),
++ SH_PFC_PIN_GROUP(usb0_ovc),
+ SH_PFC_PIN_GROUP(usb1),
++ SH_PFC_PIN_GROUP(usb1_ovc),
+ SH_PFC_PIN_GROUP(usb2),
++ SH_PFC_PIN_GROUP(usb2_ovc),
+ SH_PFC_PIN_GROUP(usb2_ch3),
++ SH_PFC_PIN_GROUP(usb2_ch3_ovc),
+ SH_PFC_PIN_GROUP(usb30),
++ SH_PFC_PIN_GROUP(usb30_ovc),
+ VIN_DATA_PIN_GROUP(vin4_data_a, 8),
+ VIN_DATA_PIN_GROUP(vin4_data_a, 10),
+ VIN_DATA_PIN_GROUP(vin4_data_a, 12),
+@@ -5026,22 +5066,27 @@ static const char * const tmu_groups[] = {
+
+ static const char * const usb0_groups[] = {
+ "usb0",
++ "usb0_ovc",
+ };
+
+ static const char * const usb1_groups[] = {
+ "usb1",
++ "usb1_ovc",
+ };
+
+ static const char * const usb2_groups[] = {
+ "usb2",
++ "usb2_ovc",
+ };
+
+ static const char * const usb2_ch3_groups[] = {
+ "usb2_ch3",
++ "usb2_ch3_ovc",
+ };
+
+ static const char * const usb30_groups[] = {
+ "usb30",
++ "usb30_ovc",
+ };
+
+ static const char * const vin4_groups[] = {
diff --git a/meta-agl-refhw-gen3/recipes-kernel/linux/files/0002-Introduce-dts-file-for-refhw-r-car-board.patch b/meta-agl-refhw-gen3/recipes-kernel/linux/files/0002-Introduce-dts-file-for-refhw-r-car-board.patch
deleted file mode 100644
index cefd7cd..0000000
--- a/meta-agl-refhw-gen3/recipes-kernel/linux/files/0002-Introduce-dts-file-for-refhw-r-car-board.patch
+++ /dev/null
@@ -1,90 +0,0 @@
----
- arch/arm64/boot/dts/renesas/r8a7795-refhw.dts | 76 +++++++++++++++++++++++++++
- 1 file changed, 76 insertions(+)
- create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-refhw.dts
-
-diff --git a/arch/arm64/boot/dts/renesas/r8a7795-refhw.dts b/arch/arm64/boot/dts/renesas/r8a7795-refhw.dts
-new file mode 100644
-index 0000000..d586c4c
---- /dev/null
-+++ b/arch/arm64/boot/dts/renesas/r8a7795-refhw.dts
-@@ -0,0 +1,76 @@
-+/*
-+ * Device Tree Source for the reference hardware board with R-Car H3 ES3.0
-+ *
-+ * Copyright (C) 2019 Panasonic Corp.
-+ *
-+ * This file is licensed under the terms of the GNU General Public License
-+ * version 2. This program is licensed "as is" without any warranty of any
-+ * kind, whether express or implied.
-+ */
-+
-+#include "r8a7795-salvator-xs-4x2g.dts"
-+
-+/ {
-+ vga {
-+ port {
-+ vga_in: endpoint {
-+ /delete-property/remote-endpoint;
-+ };
-+ };
-+ };
-+
-+ vga-encoder {
-+ ports {
-+ port@0 {
-+ adv7123_in: endpoint {
-+ /delete-property/remote-endpoint;
-+ };
-+ };
-+
-+ port@1 {
-+ adv7123_out: endpoint {
-+ /delete-property/remote-endpoint;
-+ };
-+ };
-+ };
-+ };
-+
-+};
-+
-+&du {
-+ ports {
-+ port@0 {
-+ endpoint {
-+ /delete-property/remote-endpoint;
-+ };
-+ };
-+
-+ port@3 {
-+ endpoint {
-+ /delete-property/remote-endpoint;
-+ };
-+ };
-+ };
-+};
-+
-+&lvds0 {
-+ status = "disabled";
-+};
-+
-+&pwm1 {
-+ status = "disabled";
-+};
-+
-+&scif_clk {
-+ clock-frequency = <0>;
-+};
-+
-+&sdhi0 {
-+ /delete-property/ wp-gpios;
-+ non-removable;
-+};
-+
-+&sdhi3 {
-+ /delete-property/ wp-gpios;
-+ non-removable;
-+};
---
-2.7.4
-
diff --git a/meta-agl-refhw-gen3/recipes-kernel/linux/files/0001-add-st_asm330lhh-driver.patch b/meta-agl-refhw-gen3/recipes-kernel/linux/files/0002-add-st_asm330lhh-driver.patch
index c779b39..c779b39 100644
--- a/meta-agl-refhw-gen3/recipes-kernel/linux/files/0001-add-st_asm330lhh-driver.patch
+++ b/meta-agl-refhw-gen3/recipes-kernel/linux/files/0002-add-st_asm330lhh-driver.patch
diff --git a/meta-agl-refhw-gen3/recipes-kernel/linux/files/0002-agl-reference-hardware-sample-bsp.patch b/meta-agl-refhw-gen3/recipes-kernel/linux/files/0002-agl-reference-hardware-sample-bsp.patch
deleted file mode 100644
index 6763558..0000000
--- a/meta-agl-refhw-gen3/recipes-kernel/linux/files/0002-agl-reference-hardware-sample-bsp.patch
+++ /dev/null
@@ -1,846 +0,0 @@
----
- .../arm64/boot/dts/renesas/r8a7795-salvator-xs.dts | 10 -
- arch/arm64/boot/dts/renesas/salvator-common.dtsi | 431 ++++++++++-----------
- drivers/iio/imu/Kconfig | 1 +
- drivers/iio/imu/Makefile | 1 +
- drivers/media/i2c/adv748x/adv748x-core.c | 48 ++-
- drivers/media/i2c/adv748x/adv748x.h | 12 +
- drivers/pinctrl/sh-pfc/pfc-r8a7795.c | 6 +-
- 7 files changed, 260 insertions(+), 249 deletions(-)
-
-diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
-index 498f788..b4236a5 100644
---- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
-+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
-@@ -166,16 +166,6 @@
- remote-endpoint = <&rcar_dw_hdmi1_out>;
- };
-
--&lvds0 {
-- ports {
-- port@1 {
-- lvds0_out: endpoint {
-- remote-endpoint = <&lvds_in>;
-- };
-- };
-- };
--};
--
- &ohci2 {
- status = "okay";
- };
-diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
-index 878ed7c..32d19d9 100644
---- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
-+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
-@@ -34,6 +34,10 @@
- aliases {
- serial0 = &scif2;
- serial1 = &scif1;
-+ serial2 = &scif5;
-+ serial3 = &hscif1;
-+ serial4 = &hscif0;
-+ serial5 = &hscif2;
- ethernet0 = &avb;
- };
-
-@@ -62,65 +66,26 @@
- resets = <&cpg 922>;
- };
-
-- backlight: backlight {
-- compatible = "pwm-backlight";
-- pwms = <&pwm1 0 50000>;
--
-- brightness-levels = <256 128 64 16 8 4 0>;
-- default-brightness-level = <6>;
--
-- power-supply = <&reg_12v>;
-- enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
-- };
--
-- cvbs-in {
-- compatible = "composite-video-connector";
-- label = "CVBS IN";
--
-- port {
-- cvbs_con: endpoint {
-- remote-endpoint = <&adv7482_ain7>;
-- };
-- };
-- };
--
-- hdmi-in {
-+ hdmi0-in {
- compatible = "hdmi-connector";
-- label = "HDMI IN";
-+ label = "HDMI0 IN";
- type = "a";
-
- port {
- hdmi_in_con: endpoint {
-- remote-endpoint = <&adv7482_hdmi>;
-+ remote-endpoint = <&adv7481_hdmi>;
- };
- };
- };
-
-- lvds {
-- compatible = "panel-lvds";
--
-- width-mm = <210>;
-- height-mm = <158>;
--
-- data-mapping = "jeida-24";
-- enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
--
-- panel-timing {
-- /* 1024x768 @60Hz */
-- clock-frequency = <65000000>;
-- hactive = <1024>;
-- vactive = <768>;
-- hsync-len = <136>;
-- hfront-porch = <20>;
-- hback-porch = <160>;
-- vfront-porch = <3>;
-- vback-porch = <29>;
-- vsync-len = <6>;
-- };
-+ hdmi2-in {
-+ compatible = "hdmi-connector";
-+ label = "HDMI2 IN";
-+ type = "a";
-
- port {
-- lvds_in: endpoint {
-- remote-endpoint = <&lvds0_out>;
-+ hdmi_in_con2: endpoint {
-+ remote-endpoint = <&adv7481_hdmi2>;
- };
- };
- };
-@@ -160,17 +125,6 @@
- dais = <&rsnd_port0>;
- };
-
-- vbus0_usb2: regulator-vbus0-usb2 {
-- compatible = "regulator-fixed";
--
-- regulator-name = "USB20_VBUS0";
-- regulator-min-microvolt = <5000000>;
-- regulator-max-microvolt = <5000000>;
--
-- gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
-- enable-active-high;
-- };
--
- vcc_sdhi0: regulator-vcc-sdhi0 {
- compatible = "regulator-fixed";
-
-@@ -241,40 +195,6 @@
- };
- };
-
-- vga {
-- compatible = "vga-connector";
-- no-use-ddc;
-- max-pixelclock = <100000>;
--
-- port {
-- vga_in: endpoint {
-- remote-endpoint = <&adv7123_out>;
-- };
-- };
-- };
--
-- vga-encoder {
-- compatible = "adi,adv7123";
--
-- ports {
-- #address-cells = <1>;
-- #size-cells = <0>;
--
-- port@0 {
-- reg = <0>;
-- adv7123_in: endpoint {
-- remote-endpoint = <&du_out_rgb>;
-- };
-- };
-- port@1 {
-- reg = <1>;
-- adv7123_out: endpoint {
-- remote-endpoint = <&vga_in>;
-- };
-- };
-- };
-- };
--
- x12_clk: x12 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
-@@ -325,49 +245,41 @@
- };
- };
-
--&csi20 {
-+&csi40 {
- status = "okay";
-
- ports {
- port@0 {
- reg = <0>;
-- csi20_in: endpoint {
-+
-+ csi40_in: endpoint {
- clock-lanes = <0>;
-- data-lanes = <1>;
-- remote-endpoint = <&adv7482_txb>;
-+ data-lanes = <1 2 3 4>;
-+ remote-endpoint = <&adv7481_txa>;
- };
- };
- };
- };
-
--&csi40 {
-+&csi41 {
- status = "okay";
-
- ports {
- port@0 {
- reg = <0>;
-
-- csi40_in: endpoint {
-+ csi41_in: endpoint {
- clock-lanes = <0>;
- data-lanes = <1 2 3 4>;
-- remote-endpoint = <&adv7482_txa>;
-+ remote-endpoint = <&adv7481_txa2>;
- };
- };
- };
- };
-
- &du {
-- pinctrl-0 = <&du_pins>;
-- pinctrl-names = "default";
- status = "okay";
-
-- ports {
-- port@0 {
-- endpoint {
-- remote-endpoint = <&adv7123_in>;
-- };
-- };
-- };
- };
-
- &ehci0 {
-@@ -383,12 +295,27 @@
- clock-frequency = <32768>;
- };
-
-+&hscif0 {
-+ pinctrl-0 = <&hscif0_pins>;
-+ pinctrl-names = "default";
-+ uart-has-rtscts;
-+
-+ status = "okay";
-+};
-+
- &hscif1 {
- pinctrl-0 = <&hscif1_pins>;
- pinctrl-names = "default";
-
- /* Please use exclusively to the scif1 node */
-- /* status = "okay"; */
-+ status = "okay";
-+};
-+
-+&hscif2 {
-+ pinctrl-0 = <&hscif2_pins>;
-+ pinctrl-names = "default";
-+
-+ status = "okay";
- };
-
- &hsusb {
-@@ -404,24 +331,65 @@
-
- clock-frequency = <100000>;
-
-- ak4613: codec@10 {
-- compatible = "asahi-kasei,ak4613";
-- #sound-dai-cells = <0>;
-- reg = <0x10>;
-- clocks = <&rcar_sound 3>;
-+ video-receiver@70 {
-+ compatible = "adi,adv7481";
-+ reg = <0x70>;
-
-- asahi-kasei,in1-single-end;
-- asahi-kasei,in2-single-end;
-- asahi-kasei,out1-single-end;
-- asahi-kasei,out2-single-end;
-- asahi-kasei,out3-single-end;
-- asahi-kasei,out4-single-end;
-- asahi-kasei,out5-single-end;
-- asahi-kasei,out6-single-end;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-
-- port {
-- ak4613_endpoint: endpoint {
-- remote-endpoint = <&rsnd_endpoint0>;
-+ interrupt-parent = <&gpio0>;
-+ interrupt-names = "intrq1", "intrq3";
-+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>,
-+ <5 IRQ_TYPE_LEVEL_LOW>;
-+
-+ port@8 {
-+ reg = <8>;
-+
-+ adv7481_hdmi: endpoint {
-+ remote-endpoint = <&hdmi_in_con>;
-+ };
-+ };
-+
-+ port@a {
-+ reg = <10>;
-+
-+ adv7481_txa: endpoint {
-+ clock-lanes = <0>;
-+ data-lanes = <1 2 3 4>;
-+ remote-endpoint = <&csi40_in>;
-+ };
-+ };
-+
-+ };
-+
-+ video-receiver@71 {
-+ compatible = "adi,adv7481";
-+ reg = <0x71>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ interrupt-parent = <&gpio6>;
-+ interrupt-names = "intrq1", "intrq3";
-+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>,
-+ <1 IRQ_TYPE_LEVEL_LOW>;
-+
-+ port@8 {
-+ reg = <8>;
-+
-+ adv7481_hdmi2: endpoint {
-+ remote-endpoint = <&hdmi_in_con2>;
-+ };
-+ };
-+
-+ port@a {
-+ reg = <10>;
-+
-+ adv7481_txa2: endpoint {
-+ clock-lanes = <0>;
-+ data-lanes = <1 2 3 4>;
-+ remote-endpoint = <&csi41_in>;
- };
- };
- };
-@@ -438,75 +406,62 @@
- };
- };
-
--&i2c4 {
-+&i2c3 {
-+ pinctrl-0 = <&i2c3_pins>;
-+ pinctrl-names = "default";
-+
- status = "okay";
-
-- pca9654: gpio@20 {
-- compatible = "onnn,pca9654";
-- reg = <0x20>;
-- gpio-controller;
-- #gpio-cells = <2>;
-- };
-+ clock-frequency = <100000>;
-
-- csa_vdd: adc@7c {
-- compatible = "maxim,max9611";
-- reg = <0x7c>;
-+ asm330lhh@6a {
-+ compatible = "st,asm330lhh";
-+ reg = <0x6a>;
-
-- shunt-resistor-micro-ohms = <5000>;
-+ interrupt-names = "int1", "int2";
-+ interrupts = <&gpio6 23 IRQ_TYPE_EDGE_RISING>,
-+ <&gpio2 6 IRQ_TYPE_EDGE_RISING>;
- };
-+};
-
-- csa_dvfs: adc@7f {
-- compatible = "maxim,max9611";
-- reg = <0x7f>;
-+&i2c4 {
-+ status = "okay";
-
-- shunt-resistor-micro-ohms = <5000>;
-+ versaclock5: clock-generator@68 {
-+ compatible = "idt,9fgv0841";
-+ reg = <0x68>;
-+ #clock-cells = <1>;
-+ clocks = <&x23_clk>;
-+ clock-names = "xin";
- };
-+};
-
-- video-receiver@70 {
-- compatible = "adi,adv7482";
-- reg = <0x70>;
--
-- #address-cells = <1>;
-- #size-cells = <0>;
--
-- interrupt-parent = <&gpio6>;
-- interrupt-names = "intrq1", "intrq2";
-- interrupts = <30 IRQ_TYPE_LEVEL_LOW>,
-- <31 IRQ_TYPE_LEVEL_LOW>;
--
-- port@7 {
-- reg = <7>;
--
-- adv7482_ain7: endpoint {
-- remote-endpoint = <&cvbs_con>;
-- };
-- };
--
-- port@8 {
-- reg = <8>;
-+&i2c5 {
-+ pinctrl-0 = <&i2c5_pins>;
-+ pinctrl-names = "default";
-
-- adv7482_hdmi: endpoint {
-- remote-endpoint = <&hdmi_in_con>;
-- };
-- };
-+ status = "okay";
-
-- port@a {
-- reg = <10>;
-+ clock-frequency = <100000>;
-
-- adv7482_txa: endpoint {
-- clock-lanes = <0>;
-- data-lanes = <1 2 3 4>;
-- remote-endpoint = <&csi40_in>;
-- };
-- };
-+ ak4613: codec@10 {
-+ compatible = "asahi-kasei,ak4613";
-+ #sound-dai-cells = <0>;
-+ reg = <0x10>;
-+ clocks = <&rcar_sound 3>;
-
-- port@b {
-- reg = <11>;
-+ asahi-kasei,in1-single-end;
-+ asahi-kasei,in2-single-end;
-+ asahi-kasei,out1-single-end;
-+ asahi-kasei,out2-single-end;
-+ asahi-kasei,out3-single-end;
-+ asahi-kasei,out4-single-end;
-+ asahi-kasei,out5-single-end;
-+ asahi-kasei,out6-single-end;
-
-- adv7482_txb: endpoint {
-- clock-lanes = <0>;
-- data-lanes = <1>;
-- remote-endpoint = <&csi20_in>;
-+ port {
-+ ak4613_endpoint: endpoint {
-+ remote-endpoint = <&rsnd_endpoint0>;
- };
- };
- };
-@@ -550,10 +505,6 @@
- };
- };
-
--&lvds0 {
-- status = "okay";
--};
--
- &ohci0 {
- dr_mode = "otg";
- status = "okay";
-@@ -565,6 +516,7 @@
-
- &pcie_bus_clk {
- clock-frequency = <100000000>;
-+ status = "okay";
- };
-
- &pciec0 {
-@@ -575,6 +527,21 @@
- status = "okay";
- };
-
-+&canfd {
-+ pinctrl-0 = <&canfd0_pins &canfd1_pins>;
-+ pinctrl-names = "default";
-+
-+ status = "okay";
-+
-+ channel0 {
-+ status = "okay";
-+ };
-+
-+ channel1 {
-+ status = "okay";
-+ };
-+};
-+
- &pfc {
- pinctrl-0 = <&scif_clk_pins>;
- pinctrl-names = "default";
-@@ -597,38 +564,43 @@
- };
- };
-
-- du_pins: du {
-- groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0";
-- function = "du";
-+ hscif0_pins: hscif0 {
-+ groups = "hscif0_data", "hscif0_ctrl";
-+ function = "hscif0";
- };
-
- hscif1_pins: hscif1 {
-- groups = "hscif1_data_a", "hscif1_ctrl_a";
-+ groups = "hscif1_data_a";
- function = "hscif1";
- };
-
-+ hscif2_pins: hscif2 {
-+ groups = "hscif2_data_c";
-+ function = "hscif2";
-+ };
-+
- i2c2_pins: i2c2 {
- groups = "i2c2_a";
- function = "i2c2";
- };
-
-- irq0_pins: irq0 {
-- groups = "intc_ex_irq0";
-- function = "intc_ex";
-+ i2c3_pins: i2c3 {
-+ groups = "i2c3";
-+ function = "i2c3";
- };
-
-- pwm1_pins: pwm1 {
-- groups = "pwm1_a";
-- function = "pwm1";
-+ i2c5_pins: i2c5 {
-+ groups = "i2c5";
-+ function = "i2c5";
- };
-
-- pwm2_pins: pwm2 {
-- groups = "pwm2_a";
-- function = "pwm2";
-+ irq0_pins: irq0 {
-+ groups = "intc_ex_irq0";
-+ function = "intc_ex";
- };
-
- scif1_pins: scif1 {
-- groups = "scif1_data_a", "scif1_ctrl";
-+ groups = "scif1_data_b";
- function = "scif1";
- };
-
-@@ -637,6 +609,11 @@
- function = "scif2";
- };
-
-+ scif5_pins: scif5 {
-+ groups = "scif5_data_a";
-+ function = "scif5";
-+ };
-+
- scif_clk_pins: scif_clk {
- groups = "scif_clk_a";
- function = "scif_clk";
-@@ -679,13 +656,13 @@
- };
-
- sound_pins: sound {
-- groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
-+ groups = "ssi349_ctrl", "ssi3_data", "ssi4_data";
- function = "ssi";
- };
-
- sound_clk_pins: sound_clk {
-- groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a",
-- "audio_clkout_a", "audio_clkout3_a";
-+ groups = "audio_clk_a_a", "audio_clk_b_a",
-+ "audio_clkout_a", "audio_clkout3_b";
- function = "audio_clk";
- };
-
-@@ -695,40 +672,24 @@
- };
-
- usb1_pins: usb1 {
-- mux {
-- groups = "usb1";
-- function = "usb1";
-- };
--
-- ovc {
-- pins = "GP_6_27";
-- bias-pull-up;
-- };
--
-- pwen {
-- pins = "GP_6_26";
-- bias-pull-down;
-- };
-+ groups = "usb1";
-+ function = "usb1";
- };
-
- usb30_pins: usb30 {
- groups = "usb30";
- function = "usb30";
- };
--};
--
--&pwm1 {
-- pinctrl-0 = <&pwm1_pins>;
-- pinctrl-names = "default";
--
-- status = "okay";
--};
-
--&pwm2 {
-- pinctrl-0 = <&pwm2_pins>;
-- pinctrl-names = "default";
-+ canfd0_pins: canfd0 {
-+ groups = "canfd0_data_a";
-+ function = "canfd0";
-+ };
-
-- status = "okay";
-+ canfd1_pins: canfd1 {
-+ groups = "canfd1_data";
-+ function = "canfd1";
-+ };
- };
-
- &rcar_sound {
-@@ -775,8 +736,8 @@
- bitclock-master = <&rsnd_endpoint0>;
- frame-master = <&rsnd_endpoint0>;
-
-- playback = <&ssi0 &src0 &dvc0>;
-- capture = <&ssi1 &src1 &dvc1>;
-+ playback = <&ssi3>; //ssi0 -> ssi3
-+ capture = <&ssi4>; //ssi1 -> ssi4
- };
- };
- };
-@@ -803,6 +764,13 @@
- status = "okay";
- };
-
-+&scif5 {
-+ pinctrl-0 = <&scif5_pins>;
-+ pinctrl-names = "default";
-+
-+ status = "okay";
-+};
-+
- &scif_clk {
- clock-frequency = <14745600>;
- };
-@@ -857,7 +825,7 @@
- status = "okay";
- };
-
--&ssi1 {
-+&ssi4 {
- shared-pin;
- };
-
-@@ -869,7 +837,6 @@
- pinctrl-0 = <&usb0_pins>;
- pinctrl-names = "default";
-
-- vbus-supply = <&vbus0_usb2>;
- status = "okay";
- };
-
-diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig
-index 156630a..463210d 100644
---- a/drivers/iio/imu/Kconfig
-+++ b/drivers/iio/imu/Kconfig
-@@ -40,6 +40,7 @@ config KMX61
-
- source "drivers/iio/imu/inv_mpu6050/Kconfig"
- source "drivers/iio/imu/st_lsm6dsx/Kconfig"
-+source "drivers/iio/imu/st_asm330lhh/Kconfig"
-
- endmenu
-
-diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile
-index 68629c68..349a7de 100644
---- a/drivers/iio/imu/Makefile
-+++ b/drivers/iio/imu/Makefile
-@@ -20,3 +20,4 @@ obj-y += inv_mpu6050/
- obj-$(CONFIG_KMX61) += kmx61.o
-
- obj-y += st_lsm6dsx/
-+obj-y += st_asm330lhh/
-diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c
-index da8f062..c2b37f7 100644
---- a/drivers/media/i2c/adv748x/adv748x-core.c
-+++ b/drivers/media/i2c/adv748x/adv748x-core.c
-@@ -165,6 +165,21 @@ static int adv748x_i2c_addresses[ADV748X_PAGE_MAX] = {
- ADV748X_I2C_TXA,
- };
-
-+/* Default addresses for the I2C pages 0x71*/
-+static int adv748x_i2c_addresses2[ADV748X_PAGE_MAX] = {
-+ ADV748X_I2C_IO2,
-+ ADV748X_I2C_DPLL2,
-+ ADV748X_I2C_CP2,
-+ ADV748X_I2C_HDMI2,
-+ ADV748X_I2C_EDID2,
-+ ADV748X_I2C_REPEATER2,
-+ ADV748X_I2C_INFOFRAME2,
-+ ADV748X_I2C_CEC2,
-+ ADV748X_I2C_SDP2,
-+ ADV748X_I2C_TXB2,
-+ ADV748X_I2C_TXA2,
-+};
-+
- static int adv748x_read_check(struct adv748x_state *state,
- int client_page, u8 reg)
- {
-@@ -238,9 +253,16 @@ static int adv748x_initialise_clients(struct adv748x_state *state)
- int ret;
-
- for (i = ADV748X_PAGE_DPLL; i < ADV748X_PAGE_MAX; ++i) {
-- state->i2c_clients[i] =
-- adv748x_dummy_client(state, adv748x_i2c_addresses[i],
-- ADV748X_IO_SLAVE_ADDR_BASE + i);
-+ if((state->client->addr << 1) == 0xe0) {
-+ state->i2c_clients[i] =
-+ adv748x_dummy_client(state, adv748x_i2c_addresses[i],
-+ ADV748X_IO_SLAVE_ADDR_BASE + i);
-+ } else {
-+ state->i2c_clients[i] =
-+ adv748x_dummy_client(state, adv748x_i2c_addresses2[i],
-+ ADV748X_IO_SLAVE_ADDR_BASE + i);
-+ }
-+
- if (state->i2c_clients[i] == NULL) {
- adv_err(state, "failed to create i2c client %u\n", i);
- return -ENOMEM;
-@@ -508,6 +530,20 @@ static const struct adv748x_reg_value adv748x_set_slave_address[] = {
- {ADV748X_PAGE_EOR, 0xff, 0xff} /* End of register table */
- };
-
-+static const struct adv748x_reg_value adv748x_set_slave_address2[] = {
-+ {ADV748X_PAGE_IO, 0xf3, ADV748X_I2C_DPLL2 << 1},
-+ {ADV748X_PAGE_IO, 0xf4, ADV748X_I2C_CP2 << 1},
-+ {ADV748X_PAGE_IO, 0xf5, ADV748X_I2C_HDMI2 << 1},
-+ {ADV748X_PAGE_IO, 0xf6, ADV748X_I2C_EDID2 << 1},
-+ {ADV748X_PAGE_IO, 0xf7, ADV748X_I2C_REPEATER2 << 1},
-+ {ADV748X_PAGE_IO, 0xf8, ADV748X_I2C_INFOFRAME2 << 1},
-+ {ADV748X_PAGE_IO, 0xfa, ADV748X_I2C_CEC2 << 1},
-+ {ADV748X_PAGE_IO, 0xfb, ADV748X_I2C_SDP2 << 1},
-+ {ADV748X_PAGE_IO, 0xfc, ADV748X_I2C_TXB2 << 1},
-+ {ADV748X_PAGE_IO, 0xfd, ADV748X_I2C_TXA2 << 1},
-+ {ADV748X_PAGE_EOR, 0xff, 0xff} /* End of register table */
-+};
-+
- /* Supported Formats For Script Below */
- /* - 01-29 HDMI to MIPI TxA CSI 4-Lane - RGB888: */
- static const struct adv748x_reg_value adv748x_init_txa_4lane[] = {
-@@ -683,7 +719,11 @@ static int adv748x_reset(struct adv748x_state *state)
- if (ret < 0)
- return ret;
-
-- ret = adv748x_write_regs(state, adv748x_set_slave_address);
-+ if((state->client->addr << 1) == 0xe0) {
-+ ret = adv748x_write_regs(state, adv748x_set_slave_address); //i2c address 0x70
-+ } else {
-+ ret = adv748x_write_regs(state, adv748x_set_slave_address2); //i2c address 0x71
-+ }
- if (ret < 0)
- return ret;
-
-diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h
-index fb30bfa..ac50a9e 100644
---- a/drivers/media/i2c/adv748x/adv748x.h
-+++ b/drivers/media/i2c/adv748x/adv748x.h
-@@ -40,6 +40,18 @@
- #define ADV748X_I2C_TXB 0x48 /* CSI-TXB Map */
- #define ADV748X_I2C_TXA 0x4a /* CSI-TXA Map */
-
-+#define ADV748X_I2C_IO2 0x71 /* IO Map */
-+#define ADV748X_I2C_DPLL2 0x27 /* DPLL Map */
-+#define ADV748X_I2C_CP2 0x23 /* CP Map */
-+#define ADV748X_I2C_HDMI2 0x35 /* HDMI Map */
-+#define ADV748X_I2C_EDID2 0x37 /* EDID Map */
-+#define ADV748X_I2C_REPEATER2 0x33 /* HDMI RX Repeater Map */
-+#define ADV748X_I2C_INFOFRAME2 0x30 /* HDMI RX InfoFrame Map */
-+#define ADV748X_I2C_CEC2 0x42 /* CEC Map */
-+#define ADV748X_I2C_SDP2 0x78 /* SDP Map */
-+#define ADV748X_I2C_TXB2 0x49 /* CSI-TXB Map */
-+#define ADV748X_I2C_TXA2 0x4b /* CSI-TXA Map */
-+
- enum adv748x_page {
- ADV748X_PAGE_IO,
- ADV748X_PAGE_DPLL,
-diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
-index 3ebe8de..546761c 100644
---- a/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
-+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7795.c
-@@ -3912,7 +3912,7 @@ static const unsigned int tmu_tclk2_b_mux[] = {
- /* - USB0 ------------------------------------------------------------------- */
- static const unsigned int usb0_pins[] = {
- /* PWEN, OVC */
-- RCAR_GP_PIN(6, 24), RCAR_GP_PIN(6, 25),
-+ RCAR_GP_PIN(6, 24),
- };
- static const unsigned int usb0_mux[] = {
- USB0_PWEN_MARK, USB0_OVC_MARK,
-@@ -3920,7 +3920,7 @@ static const unsigned int usb0_mux[] = {
- /* - USB1 ------------------------------------------------------------------- */
- static const unsigned int usb1_pins[] = {
- /* PWEN, OVC */
-- RCAR_GP_PIN(6, 26), RCAR_GP_PIN(6, 27),
-+ RCAR_GP_PIN(6, 27),
- };
- static const unsigned int usb1_mux[] = {
- USB1_PWEN_MARK, USB1_OVC_MARK,
-@@ -3936,7 +3936,7 @@ static const unsigned int usb2_mux[] = {
- /* - USB2_CH3 --------------------------------------------------------------- */
- static const unsigned int usb2_ch3_pins[] = {
- /* PWEN, OVC */
-- RCAR_GP_PIN(6, 30), RCAR_GP_PIN(6, 31),
-+ RCAR_GP_PIN(6, 30),
- };
- static const unsigned int usb2_ch3_mux[] = {
- USB2_CH3_PWEN_MARK, USB2_CH3_OVC_MARK,
---
-2.7.4
-
diff --git a/meta-agl-refhw-gen3/recipes-kernel/linux/linux-renesas_%.bbappend b/meta-agl-refhw-gen3/recipes-kernel/linux/linux-renesas_%.bbappend
index 3a77619..a9cdd0c 100644
--- a/meta-agl-refhw-gen3/recipes-kernel/linux/linux-renesas_%.bbappend
+++ b/meta-agl-refhw-gen3/recipes-kernel/linux/linux-renesas_%.bbappend
@@ -1,12 +1,10 @@
FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
SRC_URI_append = " \
- file://0002-Introduce-dts-file-for-refhw-r-car-board.patch \
- file://0001-add-st_asm330lhh-driver.patch \
- file://0002-agl-reference-hardware-sample-bsp.patch \
+ file://0001-create-r8a7795-usb-ovc-pinmux-groups.patch \
+ file://0001-add-agl-refhw.patch \
+ file://0002-add-st_asm330lhh-driver.patch \
file://refhw-rcar.cfg \
"
-KERNEL_CONFIG_FRAGMENTS_append = " ${WORKDIR}/refhw-rcar.cfg "
-
-KERNEL_DEVICETREE_refhw = "renesas/r8a7795-refhw.dtb"
+KERNEL_CONFIG_FRAGMENTS_append = " ${WORKDIR}/refhw-rcar.cfg"