summaryrefslogtreecommitdiffstats
path: root/meta-agl-refhw-gen3/docs
AgeCommit message (Collapse)AuthorFilesLines
2021-06-30arm-trusted-firmware: Enable building in AGL buildScott Murray1-137/+177
Leverage the reworked extra_opl_ipt hook in the rcar3 BSP's arm-trusted-firmware recipe as of BSP v4.7.0 to enable building the reference hardware flavor of the firmware as an extra firmware version when building with MACHINE=h3ulcb. This will then enable working inside the AGL build which combines the reference hardware support into its h3ulcb build to avoid needing an extra platform build. Support for building standalone with MACHINE=agl-refhw-h3 has been retained for potential use outside of the full AGL build. The firmware documentation has been reworked to document the build and flashing procedure for both types of build. Based on initial prototype by Vasyl Vavrychuk at: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-refhw/+/26352 Bug-AGL: SPEC-3916 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I5f74450851aeb4cb015a21e234709eca2014f378
2020-10-26Update firmware documentationScott Murray1-8/+8
Changes: - Add missing "optee-os" to bitbake command line for building the required firmware. - Reorganize the firmware table to have the columns in the order that the information is needed for the EM_W commands. Bug-AGL: SPEC-3658 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2020-10-21Rework for AGL UCB integrationScott Murray1-4/+54
Changes include: - The provided kernel patches have been reworked to not modify the salvator-x(s) devicetree source, but to introduce new files for the reference hardware instead. There is some possibility that the reference hardware devicetree could be based off the the salvator-x with some work and perhaps splitting of the salvator-x source, but for now the aim is to avoid breaking the salvator-x(s) with the reference hardware changes. - The modifications to the r8a7795 pinctrl driver have been replaced with a splitting of the USB interface OVC pins into their own pin groups, which has previously been done for other older Renesas hardware. This allows booting the reference hardware off of the same kernel as other H3 boards, at the expense of minor devicetree modifications for them (e.g. h3ulcb). There is likely some more work required if this needs to be upstreamed, as the ulcb.dtsi changes would mean that the pinctrl drivers for M3 would also need the new pin groups. - All changes for the ST asm330lhh driver addtion have been moved to that patch to the kernel. - A machine conf file has been added for "agl-refhw-h3", and the firmware documentation updated to document how to set up a build of the firmware using it. This is required due to the firmware options from this layer's arm-trusted-firmware bbappend not being compatible with other H3 boards (eMMC versus Hyperflash boot). A definition of the COMPATIBLE_MACHINE variable has been added to that bbappend to make sure that attempting to use it with another H3 machine will trigger an error. In AGL, the bbappend will need to be masked out with BBMASK for now. - The top-level README file has been updated to reflect the expected integration in AGL. Bug-AGL: SPEC-3658 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2020-10-20Initial check-inScott Murray1-0/+161
Initial check-in of the contents of the meta-refhw directory from the AGL_Refhw_sample_software_20200512.tar.gz archive provided by Panasonic as the initial BSP for the AGL reference hardware. The only change from the files as provided is that unneeded execute file permissions have been removed. Bug-AGL: SPEC-3658 Signed-off-by: Scott Murray <scott.murray@konsulko.com>