| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Changes:
- Kernel patches updated for the 5.10.41 linux-renesas kernel, most
changes are for the upstream rename of the non-engineering sample H3
from r8a7795 to r8a77951.
- The kernel patches have been renamed to match git format-patch /
devtool naming conventions to be a bit more consistent and hopefully
simplify future updates.
- To maintain consistency with the other rcar3 boards, as part of the
kernel patch updates the reference hardware devicetree has been
renamed to r8a77951-agl-refhw, which does result in a user visible
change in the .dtb name.
- The upstreamed, then reverted upstream patch to arm-trusted-firmware
to disable FDT generation has been replaced with a simpler patch to
just put "renesas,unknown" in the compatible string instead of
panic-ing. This should be easier to carry forward.
- Documentation updated for new branch & tag.
Bug-AGL: SPEC-4103
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I48b2cce5d55df3fff49e556821b27b8f516b98e1
|
|
During asm330lhh's driver initialization, there is a kernel message
which indicates failure of mapping irq like following:
irq: type mismatch, failed to map hwirq-39 for interrupt-controller@f1010000!
This is because of wrong statement in agl-refhw-common.dtsi and results
disabling buffered-mode of asm330lhh. With this change, the irq can be
correctly mapped and buffered-mode is enabled, i.e. buffer directory
comes up like following:
/sys/devices/platform/soc/e66d0000.i2c/i2c-3/3-006a/iio:device<n>/buffer
* Updates from Scott Murray:
- Changes merged into the main reference hardware patch as
discussed in Gerrit.
- st,drdy-int-pin declaration added to mark int1 pin as explicitly
used, matching other users of the driver.
- i2c3 bus speed increased to 400 KHz. The ASM330LHH is the only
device on it and is 400 KHz capable, which testing bears out.
If any of the higher ODRs will be used in buffered mode, this
seems desirable.
BUG-AGL: SPEC-4098
Signed-off-by: Hiroyuki Ishii <ishii.hiroyuki002@jp.panasonic.com>
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I598b1195a20d9e4611d2e505779ebeebfcbd8757
|
|
Update reference hardware support kernel patch to fix enabling the
vehicle board CAN transceivers, I mistakenly set them to output-high
instead of output-low when creating the GPIO hog definitions. The
pins need to be low to disable standby mode on the transceivers.
Bug-AGL: SPEC-4073
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I882bdac8c30e42a2271c169e3cf888a6505093de
|
|
Update reference hardware support kernel patch to enable the vehicle
board CAN transceivers by pulling them out of standby mode on power
on.
Bug-AGL: SPEC-4073
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I3f4f13fb261f9a2770b73e9f9d48240577357a70
|
|
Since GP6_26 is used as USB1_PWEN, a collision occurs in the PFC
settings and the HSCIF2 is not working. Also, GP6_27 is not used
as USB1_OVC, and overcurrent detection is not working. This patch
fixes the incorrect pin settings for usb1 as described above.
Bug-AGL: SPEC-3658
Signed-off-by: ito.yoshiki001 <ito.yoshiki001@jp.panasonic.com>
Change-Id: If488a7d5ca4be0f3469a98f332821aead911e050
|
|
Match change back to "ak4613" from "rcar-sound" for ULCB in BSP 4.70
so ALSA and WirePlumber configuration for ULCB will be picked up.
Bug-AGL: SPEC-3878
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I50241c7fb991078e5df69ebc5ba845beda1b7157
|
|
Rework agl refhw patches to apply to agl master
branch (linux-renesas v5.4/rcar-4.0.0).
Bug-AGL: SPEC-3658
Signed-off-by: Raquel Medina <raquel.medina@konsulko.com>
Change-Id: I0d69179c9acb9a28c9381c42927bda70a7589d61
|
|
Changes include:
- The provided kernel patches have been reworked to not modify the
salvator-x(s) devicetree source, but to introduce new files for the
reference hardware instead. There is some possibility that the
reference hardware devicetree could be based off the the salvator-x
with some work and perhaps splitting of the salvator-x source, but
for now the aim is to avoid breaking the salvator-x(s) with the
reference hardware changes.
- The modifications to the r8a7795 pinctrl driver have been replaced
with a splitting of the USB interface OVC pins into their own pin
groups, which has previously been done for other older Renesas
hardware. This allows booting the reference hardware off of the
same kernel as other H3 boards, at the expense of minor devicetree
modifications for them (e.g. h3ulcb). There is likely some more
work required if this needs to be upstreamed, as the ulcb.dtsi
changes would mean that the pinctrl drivers for M3 would also need
the new pin groups.
- All changes for the ST asm330lhh driver addtion have been moved to
that patch to the kernel.
- A machine conf file has been added for "agl-refhw-h3", and the
firmware documentation updated to document how to set up a build of
the firmware using it. This is required due to the firmware options
from this layer's arm-trusted-firmware bbappend not being compatible
with other H3 boards (eMMC versus Hyperflash boot). A definition
of the COMPATIBLE_MACHINE variable has been added to that bbappend
to make sure that attempting to use it with another H3 machine will
trigger an error. In AGL, the bbappend will need to be masked out
with BBMASK for now.
- The top-level README file has been updated to reflect the expected
integration in AGL.
Bug-AGL: SPEC-3658
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
Scott Murray
Hiroyuki Ishii
ito.yoshiki001
Raquel Medina