| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Update reference hardware support kernel patch to enable the vehicle
board CAN transceivers by pulling them out of standby mode on power
on.
Bug-AGL: SPEC-4073
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I3f4f13fb261f9a2770b73e9f9d48240577357a70
(cherry picked from commit e98aa7a71c06400b50a5c5bdd7e3e576485122bd)
|
|
Since GP6_26 is used as USB1_PWEN, a collision occurs in the PFC
settings and the HSCIF2 is not working. Also, GP6_27 is not used
as USB1_OVC, and overcurrent detection is not working. This patch
fixes the incorrect pin settings for usb1 as described above.
Bug-AGL: SPEC-3658
Signed-off-by: ito.yoshiki001 <ito.yoshiki001@jp.panasonic.com>
Change-Id: If488a7d5ca4be0f3469a98f332821aead911e050
(cherry picked from commit ecb71fdb747431561642ae8f67098a559937542a)
|
|
The override for the FDT deletion patch needs to be rcar-gen3
instead of agl-refhw-h3 so it will work when building with
MACHINE=h3ulcb in the AGL build as well as when building
standalone.
Bug-AGL: SPEC-3916
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I87e61017bb753ecbe9904b4ecf0afd3d0824d8be
(cherry picked from commit 67a9b0cff91f63f087639fd33d16598dda6f7d09)
|
|
Backport [1] to fix boot error:
NOTICE: BL2: Cannot set compatible string, board unsupported
[1]: https://github.com/renesas-rcar/arm-trusted-firmware/commit/3ebd371fa1b1137ddee85b1825d1c1ce31c719d1
Bug-AGL: SPEC-3916
Change-Id: I5289437e71140d16a9e3505733b6423ec79ffe81
Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com>
(cherry picked from commit c41ff5d9242d4c9e32237fcfeca18b727f641517)
|
|
Leverage the reworked extra_opl_ipt hook in the rcar3 BSP's
arm-trusted-firmware recipe as of BSP v4.7.0 to enable building the
reference hardware flavor of the firmware as an extra firmware
version when building with MACHINE=h3ulcb. This will then enable
working inside the AGL build which combines the reference hardware
support into its h3ulcb build to avoid needing an extra platform
build.
Support for building standalone with MACHINE=agl-refhw-h3 has been
retained for potential use outside of the full AGL build. The
firmware documentation has been reworked to document the build and
flashing procedure for both types of build.
Based on initial prototype by Vasyl Vavrychuk at:
https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl-refhw/+/26352
Bug-AGL: SPEC-3916
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I5f74450851aeb4cb015a21e234709eca2014f378
(cherry picked from commit e7f137f15d25b1a33b9ec9f5cd3ac79bac21fd41)
|
|
Match change back to "ak4613" from "rcar-sound" for ULCB in BSP 4.70
so ALSA and WirePlumber configuration for ULCB will be picked up.
Bug-AGL: SPEC-3878
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I50241c7fb991078e5df69ebc5ba845beda1b7157
|
|
Enable upstream kernel driver for asm330lhh: st_lsm6dsx,
and remove kernel driver st_asm330lhh introduced
previously via patch:
* update kernel config fragment to select st_lsm6dsx;
* update yocto recipe to remove patch adding
st_asm330lhh driver.
Bug-AGL: SPEC-3658
Signed-off-by: Raquel Medina <raquel.medina@konsulko.com>
Change-Id: I05e86130aab729f848ff18178fe74923c290ae00
|
|
Rework agl refhw patches to apply to agl master
branch (linux-renesas v5.4/rcar-4.0.0).
Bug-AGL: SPEC-3658
Signed-off-by: Raquel Medina <raquel.medina@konsulko.com>
Change-Id: I0d69179c9acb9a28c9381c42927bda70a7589d61
|
|
Add patch with fix for dw-hdmi IRQ issues provided by Kato Kazuomi
from Panasonic. This resolves the WARNING backtraces related to an
unhandled IRQ on boot and reading HDMI EDID.
Bug-AGL: SPEC-3658
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I6103bbec094d63ccabcb1ec273b73d8a5c114a84
|
|
Update reference hardware kernel configuration fragment to enable
CONFIG_DRM_LOAD_EDID_FIRMWARE. This will allow using it as a
workaround for the HDMI EDID issues in a pinch.
Bug-AGL: SPEC-3658
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I5616cdb19b694c5fa701e59916b91960b517a26a
|
|
Changes:
- Add missing "optee-os" to bitbake command line for building the
required firmware.
- Reorganize the firmware table to have the columns in the order
that the information is needed for the EM_W commands.
Bug-AGL: SPEC-3658
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
To generate a-t-f binaries equivalent to what is built for the other
H3 based boards in the AGL build process, add the KVM enabling patch
that is added by meta-agl-bsp. It is still unclear if there is a
straightforward path to working the separate a-t-f build for the
reference hardware into the AGL h3ulcb build, so this duplication
seems like a necessary evil for now.
Bug-AGL: SPEC-3658
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Changes include:
- The provided kernel patches have been reworked to not modify the
salvator-x(s) devicetree source, but to introduce new files for the
reference hardware instead. There is some possibility that the
reference hardware devicetree could be based off the the salvator-x
with some work and perhaps splitting of the salvator-x source, but
for now the aim is to avoid breaking the salvator-x(s) with the
reference hardware changes.
- The modifications to the r8a7795 pinctrl driver have been replaced
with a splitting of the USB interface OVC pins into their own pin
groups, which has previously been done for other older Renesas
hardware. This allows booting the reference hardware off of the
same kernel as other H3 boards, at the expense of minor devicetree
modifications for them (e.g. h3ulcb). There is likely some more
work required if this needs to be upstreamed, as the ulcb.dtsi
changes would mean that the pinctrl drivers for M3 would also need
the new pin groups.
- All changes for the ST asm330lhh driver addtion have been moved to
that patch to the kernel.
- A machine conf file has been added for "agl-refhw-h3", and the
firmware documentation updated to document how to set up a build of
the firmware using it. This is required due to the firmware options
from this layer's arm-trusted-firmware bbappend not being compatible
with other H3 boards (eMMC versus Hyperflash boot). A definition
of the COMPATIBLE_MACHINE variable has been added to that bbappend
to make sure that attempting to use it with another H3 machine will
trigger an error. In AGL, the bbappend will need to be masked out
with BBMASK for now.
- The top-level README file has been updated to reflect the expected
integration in AGL.
Bug-AGL: SPEC-3658
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Changes:
- Update the layer.conf to indicate dunfell compatibility and add
LAYERDEPENDS definition to make layer dependencies explicit.
- Move kernel files to more expected recipes-kernel/linux directory.
Bug-AGL: SPEC-3658
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Initial check-in of the contents of the meta-refhw directory from
the AGL_Refhw_sample_software_20200512.tar.gz archive provided by
Panasonic as the initial BSP for the AGL reference hardware. The
only change from the files as provided is that unneeded execute
file permissions have been removed.
Bug-AGL: SPEC-3658
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
Scott Murray
ito.yoshiki001
vasyl
Raquel Medina