summaryrefslogtreecommitdiffstats
path: root/meta-agl-refhw-gen3/docs/ReferenceHW_Rcar_gen3.md
blob: 9e826dcc36013c6ca165c7de57cbeb5836539a0f (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
# Reference Hardware Board

- [About](#about)
- [Difference to Salvator-XS When Flashing Firmware](#difference-to-salvator-xs-when-flashing-firmware)
- [How to build the Flash Writer](#how-to-build-the-flash-writer)
- [How to Flash Firmware](#how-to-flash-firmware)


## About
Reference hardware board with R-Car H3 SoC is made by Panasonic for AGL community.

## Difference to Salvator-XS When Flashing Firmware

The HyperFlash/QSPI flash switch function is not implemented on reference
hardware board at present, HyperFlash and QSPI flash are not used.  
Firmwares (arm-trusted-firmware, U-boot...) are stored into eMMC and updated by
using serial download.

## How to build the Flash Writer

1. Gets cross compiler.
```
	$ cd ~/
	$ wget https://releases.linaro.org/components/toolchain/binaries/7.3-2018.05/aarch64-elf/gcc-linaro-7.3.1-2018.05-x86_64_aarch64-elf.tar.xz
	$ tar xvf gcc-linaro-7.3.1-2018.05-x86_64_aarch64-elf.tar.xz
```

2. Prepare the source code
```
	$ cd ~/
	$ git clone https://github.com/renesas-rcar/flash_writer.git
	$ cd flash_writer
	$ git checkout rcar_gen3
```

3. Build the Flash Writer
```
	$ make AArch=64 clean
	$ CROSS_COMPILE=~/gcc-linaro-7.3.1-2018.05-x86_64_aarch64-elf/bin/aarch64-elf- make AArch=64
```

Output the following image.
./AArch64_output/AArch64_Flash_writer_SCIF_DUMMY_CERT_E6300400_salvator-x.mot

## How to Flash Firmware

1. Connect reference hardware board to the development PC by using USB serial
   cable.  
2. Open a serial console (like Teraterm in Windows, or gtkterm in Ubuntu that
   can easily send files) with a baudrate of 115200n8.
3. Set bit2 of SW2221 (on the top of SoC board) to "off"which turns SW2221 to be
	off,off,off,off.
4. Power on the reference board, you will find fillowing message outputed on the
   serial console:

```
	SCIF Download mode (w/o verification)
	(C) Renesas Electronics Corp.

	-- Load Program to SystemRAM ---------------
	please send !
	
```
5. Use console application menu to send the flash writer binary provided:

```
	AArch64_Flash_writer_SCIF_DUMMY_CERT_E6300400_salvator-x.mot
```
6. After file is transferred correctly, following message will be outputed:

```
	Flash writer for R-Car H3/M3/M3N Series V1.11 Feb.12,2020
	>
```
7. Set reference board to boot from eMMC.

    \> **EM_SECSD**  
    Please Input EXT_CSD Index(H'00 - H'1FF) :**b1**  
    EXT_CSD[B1] = 0x00  
    Please Input Value(H'00 - H'FF) :**a**  
    EXT_CSD[B1] = 0x0A  

    \> **EM_SECSD**  
    Please Input EXT_CSD Index(H'00 - H'1FF) :**b3**  
    EXT_CSD[B3] = 0x00  
    Please Input Value(H'00 - H'FF) :**8**  
    EXT_CSD[B3] = 0x08  

    \>**EM_DCSD**  
    [CSD Field Data]  
    [127:126]  CSD_STRUCTURE       0x03  
    [125:122]  SPEC_VERS           0x04  
    [119:112]  TAAC                0x27  
    [111:104]  NSAC                0x01  
    [103: 96]  TRAN_SPEED          0x32  
    [ 95: 84]  CCC                 0x00F5  
    [ 83: 80]  READ_BL_LEN         0x09  
    [ 79: 79]  READ_BL_PARTIAL     0x00  
    [ 78: 78]  WRITE_BLK_MISALIGN  0x00  
    [ 77: 77]  READ_BLK_MISALIGN   0x00  
    [ 76: 76]  DSR_IMP             0x00  
    [ 73: 62]  C_SIZE              0x0FFF  
    [ 61: 59]  VDD_R_CURR_MIN      0x06  
    [ 58: 56]  VDD_R_CURR_MAX      0x06  
    [ 55: 53]  VDD_W_CURR_MIN      0x06  
    [ 52: 50]  VDD_W_CURR_MAX      0x06  
    [ 49: 47]  C_SIZE_MULT         0x07  
    [ 46: 42]  ERASE_GRP_SIZE      0x1F  
    [ 41: 37]  ERASE_GRP_MULT      0x1F  
    [ 36: 32]  WP_GRP_SIZE         0x0F  
    [ 31: 31]  WP_GRP_ENABLE       0x01  
    [ 30: 29]  DEFAULT_ECC         0x00  
    [ 28: 26]  R2W_FACTOR          0x03  
    [ 25: 22]  WRITE_BL_LEN        0x09  
    [ 21: 21]  WRITE_BL_PARTIAL    0x00  
    [ 16: 16]  CONTENT_PROT_APP    0x00  
    [ 15: 15]  FILE_FORMAT_GRP     0x00  
    [ 14: 14]  COPY                0x01  
    [ 13: 13]  PERM_WRITE_PROTECT  0x00  
    [ 12: 12]  TMP_WRITE_PROTECT   0x00  
    [ 11: 10]  FILE_FORMAT         0x00  
    [  9:  8]  ECC                 0x00  
    [  7:  1]  CRC                 0x00  


8. Flash firmware  
  The firmware are supposed to be stored on eMMC as following:

  Name					| Load address		| eMMC partition 	| Flash address		| Description
  --------------------------------------|-----------------------|-----------------------|-----------------------|-----------------------------
  bootparam_sa0-4x2g.srec		| H'E6320000		| 1			| H'000000		| Boot parameter
  bl2-salvator-x-4x2g.srec		| H'E6304000		| 1			| H'00001E		| bl2 loader
  cert_header_sa6-4x2g.srec		| H'E6320000		| 1			| H'000180		| Certification
  bl31-salvator-x-4x2g.srec		| H'44000000		| 1			| H'000200		| bl3 loader
  tee-salvator-x.srec			| H'44100000		| 1			| H'001000		| OP-Tee
  u-boot-elf-salvator-xs-4x2g.srec	| H'50000000		| 2			| H'000000		| U-boot

  You can find these firmwares in the AGL build directory $AGL_TOP/build/tmp/deploy/images/salvator-x
  and you can flash them by using **EM_W** command as following:  

  \> **EM_W**  
  \---------------------------------------------------------  
  Please select,eMMC Partition Area.  
   0:User Partition Area   : 62496768 KBytes  
    eMMC Sector Cnt : H'0 - H'07733FFF  
   1:Boot Partition 1      : 32640 KBytes  
    eMMC Sector Cnt : H'0 - H'0000FEFF  
   2:Boot Partition 2      : 32640 KBytes  
    eMMC Sector Cnt : H'0 - H'0000FEFF  
  \---------------------------------------------------------  
  Select area(0-2)> **\<Enter the eMMC partition number above, Ex.'1' \>**   
  -- Boot Partition X Program -----------------------------  
  Please Input Start Address in sector : **\<Enter the Flash address above, Ex.'1e'\>**  
  Please Input Program Start Address : **\<Enter the Load address above, Ex. 'e6304000'\>**  
  Work RAM(H'50000000-H'50FFFFFF) Clear....  
  please send ! ('.' & CR stop load)  
  **\<Send the fimware file above by using console appliction, Ex. send 'bl2-salvator-x-4x2g.srec'\>**

9. Power off the board.
10. Reset bit2 of SW2221 (on the top of SoC board) to "on", which turns SW2221 to be  
	off,on,off,off