aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorVladimir Barinov <vladimir.barinov@cogentembedded.com>2017-08-14 18:01:05 +0300
committerVladimir Barinov <vladimir.barinov@cogentembedded.com>2017-08-14 18:01:05 +0300
commitb65e908a41e1a7e751149f71805cceeffc9ffb8d (patch)
treea348e88194aee328644ce9149f3de58f96710f04
parentde056daee318ec3df63ec57f0acec3accee97e24 (diff)
Eagle r8a7797 support, adv7511 clock rate fixes
1) support Eagle r8a7797 2) propagate max clock rate set for adv7511 via dts: Eagle and Kingfisher use ADV7511 KF rate 100Mhz Eagle rate 166Mhz
-rw-r--r--meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0018-arm64-renesas-r8a7797-Add-Renesas-R8A7797-SoC-suppor.patch459
-rw-r--r--meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch676
-rw-r--r--meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0064-ADV7511-limit-maximum-pixelclock.patch61
3 files changed, 1002 insertions, 194 deletions
diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0018-arm64-renesas-r8a7797-Add-Renesas-R8A7797-SoC-suppor.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0018-arm64-renesas-r8a7797-Add-Renesas-R8A7797-SoC-suppor.patch
index 02e4e4d..348f0e1 100644
--- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0018-arm64-renesas-r8a7797-Add-Renesas-R8A7797-SoC-suppor.patch
+++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0018-arm64-renesas-r8a7797-Add-Renesas-R8A7797-SoC-suppor.patch
@@ -8,12 +8,15 @@ This adds Renesas R8A7797 SoC support
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
---
arch/arm64/Kconfig.platforms | 6 +
- arch/arm64/boot/dts/renesas/r8a7797.dtsi | 986 ++++++++++
+ arch/arm64/boot/dts/renesas/r8a7797.dtsi | 992 ++++++++++
drivers/clk/renesas/Kconfig | 1 +
drivers/clk/renesas/Makefile | 1 +
- drivers/clk/renesas/r8a7797-cpg-mssr.c | 217 ++
+ drivers/clk/renesas/r8a7797-cpg-mssr.c | 218 +++
+ drivers/clk/renesas/rcar-gen3-cpg.c | 41 +-
+ drivers/clk/renesas/rcar-gen3-cpg.h | 6 +
drivers/clk/renesas/renesas-cpg-mssr.c | 6 +
drivers/clk/renesas/renesas-cpg-mssr.h | 1 +
+ drivers/cpufreq/cpufreq-dt-platdev.c | 1 +
drivers/gpio/gpio-rcar.c | 6 +-
drivers/gpu/drm/rcar-du/rcar_du_drv.c | 25 +
drivers/gpu/drm/rcar-du/rcar_du_group.c | 12 +-
@@ -22,20 +25,21 @@ Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
drivers/i2c/busses/i2c-rcar.c | 1 +
drivers/iommu/ipmmu-vmsa.c | 7 +-
drivers/media/platform/soc_camera/Kconfig | 2 +-
- drivers/media/platform/soc_camera/rcar_csi2.c | 25 +-
+ drivers/media/platform/soc_camera/rcar_csi2.c | 26 +-
drivers/media/platform/soc_camera/rcar_vin.c | 86 +-
- drivers/media/platform/vsp1/vsp1_drv.c | 8 +
- drivers/media/platform/vsp1/vsp1_lif.c | 13 +
+ drivers/media/platform/vsp1/vsp1_drv.c | 9 +
+ drivers/media/platform/vsp1/vsp1_lif.c | 12 +-
drivers/media/platform/vsp1/vsp1_regs.h | 7 +
- drivers/mmc/host/sh_mobile_sdhi.c | 1 +
+ drivers/mmc/host/sh_mobile_sdhi.c | 2 +
drivers/net/ethernet/renesas/ravb_main.c | 1 +
drivers/pinctrl/sh-pfc/Kconfig | 5 +
drivers/pinctrl/sh-pfc/Makefile | 1 +
drivers/pinctrl/sh-pfc/core.c | 7 +
- drivers/pinctrl/sh-pfc/pfc-r8a7797.c | 2615 +++++++++++++++++++++++++
+ drivers/pinctrl/sh-pfc/pfc-r8a7797.c | 2586 +++++++++++++++++++++++++
drivers/pinctrl/sh-pfc/sh_pfc.h | 12 +
- drivers/soc/renesas/Makefile | 3 +
+ drivers/soc/renesas/Makefile | 4 +
drivers/soc/renesas/r8a7797-sysc.c | 39 +
+ drivers/soc/renesas/rcar-rst.c | 1 +
drivers/soc/renesas/rcar-sysc.c | 3 +
drivers/soc/renesas/rcar-sysc.h | 1 +
drivers/soc/renesas/rcar_ems_ctrl.c | 10 +
@@ -44,7 +48,7 @@ Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
drivers/thermal/rcar_gen3_thermal.c | 29 +
include/dt-bindings/clock/r8a7797-cpg-mssr.h | 48 +
include/dt-bindings/power/r8a7797-sysc.h | 32 +
- 37 files changed, 4247 insertions(+), 28 deletions(-)
+ 41 files changed, 4275 insertions(+), 30 deletions(-)
create mode 100644 arch/arm64/boot/dts/renesas/r8a7797.dtsi
create mode 100644 drivers/clk/renesas/r8a7797-cpg-mssr.c
create mode 100644 drivers/pinctrl/sh-pfc/pfc-r8a7797.c
@@ -71,10 +75,10 @@ index 7c104ca..9380fc6 100644
help
diff --git a/arch/arm64/boot/dts/renesas/r8a7797.dtsi b/arch/arm64/boot/dts/renesas/r8a7797.dtsi
new file mode 100644
-index 0000000..c09df87
+index 0000000..5bd447a
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a7797.dtsi
-@@ -0,0 +1,986 @@
+@@ -0,0 +1,992 @@
+/*
+ * Device Tree Source for the r8a7797 SoC
+ *
@@ -262,7 +266,7 @@ index 0000000..c09df87
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; /* SPI5:GPIO.ch1 */
+ #gpio-cells = <2>;
+ gpio-controller;
-+ gpio-ranges = <&pfc 0 32 27>;
++ gpio-ranges = <&pfc 0 32 28>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ clocks = <&cpg CPG_MOD 911>; /* RMSTPCR9/bit11:GPIO1 */
@@ -372,6 +376,16 @@ index 0000000..c09df87
+ status = "disabled";
+ };
+
++ prr: chipid@fff00044 {
++ compatible = "renesas,prr";
++ reg = <0 0xfff00044 0 4>;
++ };
++
++ rst: reset-controller@e6160000 {
++ compatible = "renesas,r8a7797-rst";
++ reg = <0 0xe6160000 0 0x0200>;
++ };
++
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,r8a7797-sysc";
+ reg = <0 0xe6180000 0 0x0440>;
@@ -897,12 +911,12 @@ index 0000000..c09df87
+ status = "disabled";
+ };
+
-+/*
++
+ sdhi2: sd@ee140000 {
+ compatible = "renesas,sdhi-r8a7797";
+ reg = <0 0xee140000 0 0x2000>;
-+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; ** SPI165:SDHI.ch0 **
-+ clocks = <&cpg CPG_MOD 314>; ** RMSTPCR3/bit14:SDIF **
++ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; /* SPI165:SDHI.ch0 */
++ clocks = <&cpg CPG_MOD 314>; /* RMSTPCR3/bit14:SDIF */
+ power-domains = <&sysc R8A7797_PD_ALWAYS_ON>;
+ renesas,clk-rate = <200000000>;
+ cap-sd-highspeed;
@@ -911,7 +925,7 @@ index 0000000..c09df87
+ renesas,mmc-scc-tapnum = <8>;
+ status = "disabled";
+ };
-+*/
++
+ mmc0: mmc@ee140000 {
+ compatible = "renesas,mmc-r8a7797";
+ reg = <0 0xee140000 0 0x2000>;
@@ -919,11 +933,7 @@ index 0000000..c09df87
+ clocks = <&cpg CPG_MOD 314>; /* RMSTPCR3/bit14:SDIF */
+ power-domains = <&sysc R8A7797_PD_ALWAYS_ON>;
+ renesas,clk-rate = <200000000>;
-+/* cap-sd-highspeed;
-+ sd-uhs-sdr104;
-+ sd-uhs-sdr50;
+ cap-mmc-highspeed;
-+*/
+ mmc-hs200-1_8v;
+ renesas,mmc-scc-tapnum = <8>;
+ status = "disabled";
@@ -1087,10 +1097,10 @@ index 1072f76..c6f0abb 100644
obj-$(CONFIG_CLK_RENESAS_CPG_MSSR) += renesas-cpg-mssr.o clk-div6.o
diff --git a/drivers/clk/renesas/r8a7797-cpg-mssr.c b/drivers/clk/renesas/r8a7797-cpg-mssr.c
new file mode 100644
-index 0000000..e758685
+index 0000000..c69bf31
--- /dev/null
+++ b/drivers/clk/renesas/r8a7797-cpg-mssr.c
-@@ -0,0 +1,217 @@
+@@ -0,0 +1,218 @@
+/*
+ * r8a7797 Clock Pulse Generator / Module Standby and Software Reset
+ *
@@ -1156,7 +1166,7 @@ index 0000000..e758685
+ DEF_FIXED(".s2", CLK_S2, CLK_PLL1_DIV2, 6, 1),
+
+ /* Core Clock Outputs */
-+ DEF_BASE("z2", R8A7797_CLK_Z2, CLK_TYPE_GEN3_Z2, CLK_PLL0),
++ DEF_BASE("z2", R8A7797_CLK_Z2, CLK_TYPE_GEN3_Z2, CLK_PLL1_DIV4),
+ DEF_FIXED("ztr", R8A7797_CLK_ZTR, CLK_PLL1_DIV2, 6, 1),
+ DEF_FIXED("ztrd2", R8A7797_CLK_ZTRD2, CLK_PLL1_DIV2, 12, 1),
+ DEF_FIXED("zt", R8A7797_CLK_ZT, CLK_PLL1_DIV2, 4, 1),
@@ -1168,13 +1178,14 @@ index 0000000..e758685
+ DEF_FIXED("s2d2", R8A7797_CLK_S2D2, CLK_S2, 2, 1),
+ DEF_FIXED("s2d4", R8A7797_CLK_S2D4, CLK_S2, 4, 1),
+
-+ DEF_GEN3_SD("sd0", R8A7797_CLK_SD0, CLK_PLL1_DIV4, 0x0074), /* FIXME */
++ DEF_GEN3_SD0H("sd0h", R8A7797_CLK_SD0H, CLK_PLL1_DIV4, 0x0074),
++ DEF_GEN3_SD0("sd0", R8A7797_CLK_SD0, CLK_PLL1_DIV4, 0x0074),
+
+ DEF_FIXED("cl", R8A7797_CLK_CL, CLK_PLL1_DIV2, 48, 1),
+ DEF_FIXED("cp", R8A7797_CLK_CP, CLK_EXTAL, 2, 1),
+
-+ DEF_FIXED("mso", R8A7797_CLK_MSO, CLK_PLL1_DIV4, 6, 1),
-+ DEF_FIXED("canfd", R8A7797_CLK_CANFD, CLK_PLL1_DIV4, 20, 1),
++ DEF_DIV6P1("mso", R8A7797_CLK_MSO, CLK_PLL1_DIV4, 0x014),
++ DEF_DIV6P1("canfd", R8A7797_CLK_CANFD, CLK_PLL1_DIV4, 0x244),
+ DEF_DIV6P1("csi0", R8A7797_CLK_CSI0, CLK_PLL1_DIV4, 0x00c),
+
+ DEF_FIXED("osc", R8A7797_CLK_OSC, CLK_PLL1_DIV2, (12*1024), 1),
@@ -1259,14 +1270,14 @@ index 0000000..e758685
+
+static const struct rcar_gen3_cpg_pll_config cpg_pll_configs[8] __initconst = {
+ /* EXTAL div PLL1 mult PLL3 mult */
-+ { 1, 192, 96, },
-+ { 1, 192, 80, },
-+ { 1, 160, 80, },
-+ { 1, 160, 66, },
++ { 1, 192, 96, },
++ { 1, 192, 80, },
++ { 1, 160, 80, },
++ { 1, 160, 66, },
+ { 2, 236, 118, },
-+ { 2, 236, 98, },
-+ { 2, 192, 96, },
-+ { 2, 192, 80, },
++ { 2, 236, 98, },
++ { 2, 192, 96, },
++ { 2, 192, 80, },
+};
+
+static int __init r8a7797_cpg_mssr_init(struct device *dev)
@@ -1308,6 +1319,116 @@ index 0000000..e758685
+ .init = r8a7797_cpg_mssr_init,
+ .cpg_clk_register = rcar_gen3_cpg_clk_register,
+};
+diff --git a/drivers/clk/renesas/rcar-gen3-cpg.c b/drivers/clk/renesas/rcar-gen3-cpg.c
+index f9d1763..96de154 100644
+--- a/drivers/clk/renesas/rcar-gen3-cpg.c
++++ b/drivers/clk/renesas/rcar-gen3-cpg.c
+@@ -26,6 +26,13 @@
+ #include "renesas-cpg-mssr.h"
+ #include "rcar-gen3-cpg.h"
+
++static spinlock_t cpg_lock;
++
++static const struct soc_device_attribute r8a7797[] = {
++ { .soc_id = "r8a7797" },
++ { /* sentinel */ }
++};
++
+ #define CPG_PLL0CR 0x00d8
+ #define CPG_PLL2CR 0x002c
+ #define CPG_PLL4CR 0x01f4
+@@ -227,7 +234,10 @@ static unsigned long cpg_z2_clk_recalc_rate(struct clk_hw *hw,
+ unsigned int val;
+ unsigned long rate;
+
+- val = (clk_readl(zclk->reg) & CPG_FRQCRC_Z2FC_MASK);
++ if (!soc_device_match(r8a7797))
++ val = (clk_readl(zclk->reg) & CPG_FRQCRC_Z2FC_MASK);
++ else
++ val = 0;
+ mult = 32 - val;
+
+ rate = div_u64((u64)parent_rate * mult + 16, 32);
+@@ -339,6 +349,11 @@ static int cpg_z2_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ u32 val, kick;
+ unsigned int i;
+
++ if (soc_device_match(r8a7797)){
++ pr_info("Do not support V3M's Z2 clock changing\n");
++ return 0;
++ }
++
+ mult = div_u64((u64)rate * 32 + parent_rate/2, parent_rate);
+ mult = clamp(mult, 1U, 32U);
+
+@@ -451,6 +466,19 @@ static struct clk * __init cpg_z2_clk_register(const char *name,
+ /*
+ * SDn Clock
+ */
++/* SDHI divisors */
++static const struct clk_div_table cpg_sdh_div_table[] = {
++ { 0, 2 }, { 1, 3 }, { 2, 4 }, { 3, 6 },
++ { 4, 8 }, { 5, 12 }, { 6, 16 }, { 7, 18 },
++ { 8, 24 }, { 10, 36 }, { 11, 48 }, { 0, 0 },
++};
++
++static const struct clk_div_table cpg_sd01_div_table[] = {
++ { 4, 8 },
++ { 5, 12 }, { 6, 16 }, { 7, 18 }, { 8, 24 },
++ { 10, 36 }, { 11, 48 }, { 12, 10 }, { 0, 0 },
++};
++
+ #define CPG_SD_STP_HCK BIT(9)
+ #define CPG_SD_STP_CK BIT(8)
+
+@@ -749,6 +777,14 @@ struct clk * __init rcar_gen3_cpg_clk_register(struct device *dev,
+ case CLK_TYPE_GEN3_SD:
+ return cpg_sd_clk_register(core, base, __clk_get_name(parent));
+
++ case CLK_TYPE_GEN3_SD0:
++ return clk_register_divider_table(NULL, core->name, __clk_get_name(parent), 0, base + 0x0074,
++ 4, 4,0, cpg_sd01_div_table, &cpg_lock);
++
++ case CLK_TYPE_GEN3_SD0H:
++ return clk_register_divider_table(NULL, core->name, __clk_get_name(parent), 0, base + 0x0074,
++ 8, 4,0, cpg_sdh_div_table, &cpg_lock);
++
+ case CLK_TYPE_GEN3_R:
+ if (cpg_quirks & RCKCR_CKSEL) {
+ /*
+@@ -799,5 +835,8 @@ int __init rcar_gen3_cpg_init(const struct rcar_gen3_cpg_pll_config *config,
+ if (attr)
+ cpg_quirks = (uintptr_t)attr->data;
+ pr_debug("%s: mode = 0x%x quirks = 0x%x\n", __func__, mode, cpg_quirks);
++
++ spin_lock_init(&cpg_lock);
++
+ return 0;
+ }
+diff --git a/drivers/clk/renesas/rcar-gen3-cpg.h b/drivers/clk/renesas/rcar-gen3-cpg.h
+index 4155023..f0c0a92 100644
+--- a/drivers/clk/renesas/rcar-gen3-cpg.h
++++ b/drivers/clk/renesas/rcar-gen3-cpg.h
+@@ -19,6 +19,8 @@ enum rcar_gen3_clk_types {
+ CLK_TYPE_GEN3_PLL3,
+ CLK_TYPE_GEN3_PLL4,
+ CLK_TYPE_GEN3_SD,
++ CLK_TYPE_GEN3_SD0,
++ CLK_TYPE_GEN3_SD0H,
+ CLK_TYPE_GEN3_R,
+ CLK_TYPE_GEN3_Z,
+ CLK_TYPE_GEN3_Z2,
+@@ -26,6 +28,10 @@ enum rcar_gen3_clk_types {
+
+ #define DEF_GEN3_SD(_name, _id, _parent, _offset) \
+ DEF_BASE(_name, _id, CLK_TYPE_GEN3_SD, _parent, .offset = _offset)
++#define DEF_GEN3_SD0(_name, _id, _parent, _offset) \
++ DEF_BASE(_name, _id, CLK_TYPE_GEN3_SD0, _parent, .offset = _offset)
++#define DEF_GEN3_SD0H(_name, _id, _parent, _offset) \
++ DEF_BASE(_name, _id, CLK_TYPE_GEN3_SD0H, _parent, .offset = _offset)
+
+ struct rcar_gen3_cpg_pll_config {
+ unsigned int extal_div;
diff --git a/drivers/clk/renesas/renesas-cpg-mssr.c b/drivers/clk/renesas/renesas-cpg-mssr.c
index 494e4e8..e523ab7 100644
--- a/drivers/clk/renesas/renesas-cpg-mssr.c
@@ -1337,6 +1458,18 @@ index 148f4f0a..77c27d8 100644
/*
+diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
+index 29f76a4..809a6e1 100644
+--- a/drivers/cpufreq/cpufreq-dt-platdev.c
++++ b/drivers/cpufreq/cpufreq-dt-platdev.c
+@@ -59,6 +59,7 @@
+ { .compatible = "renesas,r8a7794", },
+ { .compatible = "renesas,r8a7795", },
+ { .compatible = "renesas,r8a7796", },
++ { .compatible = "renesas,r8a7797", },
+ { .compatible = "renesas,sh73a0", },
+
+ { .compatible = "rockchip,rk2928", },
diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c
index f721a89..118e579 100644
--- a/drivers/gpio/gpio-rcar.c
@@ -1362,7 +1495,7 @@ index f721a89..118e579 100644
.data = &gpio_rcar_info_gen1,
}, {
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
-index 6295c73..0f9fe44 100644
+index 6295c73..ac9cf2a 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
@@ -289,6 +289,30 @@
@@ -1390,7 +1523,7 @@ index 6295c73..0f9fe44 100644
+ },
+ },
+ .num_lvds = 1,
-+ .dpll_ch = 0,
++ .dpll_ch = BIT(1),
+};
+
static const struct of_device_id rcar_du_of_table[] = {
@@ -1588,7 +1721,7 @@ index 17178ad..5539c5d 100644
This is a v4l2 driver for the R-Car CSI-2 Interface
diff --git a/drivers/media/platform/soc_camera/rcar_csi2.c b/drivers/media/platform/soc_camera/rcar_csi2.c
-index 851a4ca..1b8a6c6 100644
+index 05f623468..5faac64 100644
--- a/drivers/media/platform/soc_camera/rcar_csi2.c
+++ b/drivers/media/platform/soc_camera/rcar_csi2.c
@@ -25,6 +25,7 @@
@@ -1643,7 +1776,7 @@ index 851a4ca..1b8a6c6 100644
priv->base + RCAR_CSI2_PHYPLL);
return 0;
-@@ -488,6 +509,7 @@ static int rcar_csi2_s_power(struct v4l2_subdev *sd, int on)
+@@ -488,6 +510,7 @@ static int rcar_csi2_s_power(struct v4l2_subdev *sd, int on)
#ifdef CONFIG_OF
static const struct of_device_id rcar_csi2_of_table[] = {
@@ -1651,7 +1784,7 @@ index 851a4ca..1b8a6c6 100644
{ .compatible = "renesas,r8a7796-csi2", .data = (void *)RCAR_GEN3 },
{ .compatible = "renesas,r8a7795-csi2", .data = (void *)RCAR_GEN3 },
{ },
-@@ -496,6 +518,7 @@ static int rcar_csi2_s_power(struct v4l2_subdev *sd, int on)
+@@ -496,6 +519,7 @@ static int rcar_csi2_s_power(struct v4l2_subdev *sd, int on)
#endif
static struct platform_device_id rcar_csi2_id_table[] = {
@@ -1875,15 +2008,16 @@ index 400958b..74fb005 100644
for (i = 0; i < num; i++) {
diff --git a/drivers/media/platform/vsp1/vsp1_drv.c b/drivers/media/platform/vsp1/vsp1_drv.c
-index 45bd0f3..50eea8a 100644
+index 45bd0f3..90f7109 100644
--- a/drivers/media/platform/vsp1/vsp1_drv.c
+++ b/drivers/media/platform/vsp1/vsp1_drv.c
-@@ -888,6 +888,14 @@ void vsp1_device_put(struct vsp1_device *vsp1)
+@@ -888,6 +888,15 @@ void vsp1_device_put(struct vsp1_device *vsp1)
.wpf_count = 2,
.num_bru_inputs = 5,
.header_mode = true,
-+ }, {
++ }, {
+ .version = VI6_IP_VERSION_MODEL_VSPD_V3M,
++ .model = "VSP2-D",
+ .gen = 3,
+ .features = VSP1_HAS_BRU | VSP1_HAS_LIF,
+ .rpf_count = 5,
@@ -1894,7 +2028,7 @@ index 45bd0f3..50eea8a 100644
};
diff --git a/drivers/media/platform/vsp1/vsp1_lif.c b/drivers/media/platform/vsp1/vsp1_lif.c
-index b442d14..536ee4a 100644
+index b442d14..e79f9e6 100644
--- a/drivers/media/platform/vsp1/vsp1_lif.c
+++ b/drivers/media/platform/vsp1/vsp1_lif.c
@@ -13,6 +13,7 @@
@@ -1917,17 +2051,16 @@ index b442d14..536ee4a 100644
/* -----------------------------------------------------------------------------
* Device Access
*/
-@@ -142,6 +148,9 @@ static void lif_configure(struct vsp1_entity *entity,
- if (params != VSP1_ENTITY_PARAMS_INIT)
- return;
-
-+ if (soc_device_match(r8a7797))
-+ obth = 1500;
-+
+@@ -145,7 +151,7 @@ static void lif_configure(struct vsp1_entity *entity,
format = vsp1_entity_get_pad_format(&lif->entity, lif->entity.config,
LIF_PAD_SOURCE);
-@@ -158,6 +167,10 @@ static void lif_configure(struct vsp1_entity *entity,
+- if (vsp1_gen3_vspdl_check(vsp1))
++ if (vsp1_gen3_vspdl_check(vsp1) || soc_device_match(r8a7797))
+ obth = 1500;
+ else
+ obth = 3000;
+@@ -158,6 +164,10 @@ static void lif_configure(struct vsp1_entity *entity,
(obth << VI6_LIF_CTRL_OBTH_SHIFT) |
(format->code == 0 ? VI6_LIF_CTRL_CFMT : 0) |
VI6_LIF_CTRL_REQSEL | VI6_LIF_CTRL_LIF_EN);
@@ -1964,14 +2097,15 @@ index 885f60b..2d863a7 100644
#define VI6_IP_VERSION_SOC_MASK (0xff << 0)
#define VI6_IP_VERSION_SOC_H (0x01 << 0)
diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c
-index 98c4e11..ee7b188 100644
+index 136ebac..fe4e022 100644
--- a/drivers/mmc/host/sh_mobile_sdhi.c
+++ b/drivers/mmc/host/sh_mobile_sdhi.c
-@@ -137,6 +137,7 @@ struct sh_mobile_sdhi_of_data {
+@@ -150,6 +150,8 @@ struct sh_mobile_sdhi_of_data {
{ .compatible = "renesas,sdhi-r8a7794", .data = &of_rcar_gen2_compatible, },
{ .compatible = "renesas,sdhi-r8a7795", .data = &of_rcar_gen3_compatible, },
{ .compatible = "renesas,sdhi-r8a7796", .data = &of_rcar_gen3_compatible, },
+ { .compatible = "renesas,sdhi-r8a7797", .data = &of_rcar_gen3_compatible, },
++ { .compatible = "renesas,mmc-r8a7797", .data = &of_rcar_gen3_compatible, },
{},
};
MODULE_DEVICE_TABLE(of, sh_mobile_sdhi_of_match);
@@ -2042,10 +2176,10 @@ index 6399eb1..9bb3665 100644
.compatible = "renesas,pfc-sh73a0",
diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7797.c b/drivers/pinctrl/sh-pfc/pfc-r8a7797.c
new file mode 100644
-index 0000000..a528b44
+index 0000000..d58ccb3
--- /dev/null
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7797.c
-@@ -0,0 +1,2615 @@
+@@ -0,0 +1,2586 @@
+/*
+ * R8A7797 processor support - PFC hardware block.
+ *
@@ -2064,6 +2198,7 @@ index 0000000..a528b44
+
+#include <linux/io.h>
+#include <linux/kernel.h>
++#include <linux/sys_soc.h>
+
+#include "core.h"
+#include "sh_pfc.h"
@@ -2072,7 +2207,8 @@ index 0000000..a528b44
+ PORT_GP_CFG_22(0, fn, sfx, SH_PFC_PIN_CFG_DRIVE_STRENGTH), \
+ PORT_GP_CFG_28(1, fn, sfx, SH_PFC_PIN_CFG_DRIVE_STRENGTH), \
+ PORT_GP_CFG_17(2, fn, sfx, SH_PFC_PIN_CFG_DRIVE_STRENGTH), \
-+ PORT_GP_CFG_17(3, fn, sfx, SH_PFC_PIN_CFG_DRIVE_STRENGTH), \
++ PORT_GP_CFG_17(3, fn, sfx, SH_PFC_PIN_CFG_DRIVE_STRENGTH | \
++ SH_PFC_PIN_CFG_IO_VOLTAGE), \
+ PORT_GP_CFG_6(4, fn, sfx, SH_PFC_PIN_CFG_DRIVE_STRENGTH), \
+ PORT_GP_CFG_15(5, fn, sfx, SH_PFC_PIN_CFG_DRIVE_STRENGTH)
+/*
@@ -2336,25 +2472,28 @@ index 0000000..a528b44
+ Set Value = H'0 Set Value = H'1
+Register Function Pin Function Pin
+------------------------------------------------------------
++sel_i2c3 SDA3_A VI0_DATA2 SDA3_B VI1_DATA10
++ SCL3_A VI0_DATA3 SCL3_B VI1_DATA9
+sel_hscif0 HSCIF0_A SCIF_CLK HSCIF0_B SCIF_CLK
-+sel_scif1 SCIF1_A RX1 SCIF1_B TX1
-+ SCIF1_A TX1 SCIF1_B RX1
++sel_scif1 SCIF1_A RX1 SCIF1_B TX1
++ SCIF1_A TX1 SCIF1_B RX1
+sel_canfd0 CANFD0_A CANFD0_TX CANFD0_B CANFD0_TX
-+ CANFD0_A CANFD0_RX CANFD0_B CANFD0_RX
-+ CANFD0_A CANFD_CLK CANFD0_B CANFD_CLK
++ CANFD0_A CANFD0_RX CANFD0_B CANFD0_RX
++ CANFD0_A CANFD_CLK CANFD0_B CANFD_CLK
+sel_pwm4 PWM4_A PWM4 PWM4_B PWM4
+sel_pwm3 PWM3_A PWM3 PWM3_B PWM3
+sel_pwm2 PWM2_A PWM2 PWM2_B PWM2
+sel_pwm1 PWM1_A PWM1 PWM1_B PWM1
+sel_pwm0 PWM0_A PWM0 PWM0_B PWM0
+sel_rfso RFSO_A FSO_CFE_0_N RFSO_B FSO_CFE_0_N
-+ RFSO_A FSO_CFE_1_N RFSO_B FSO_CFE_1_N
-+ RFSO_A FSO_TOE_N RFSO_B FSO_TOE_N
++ RFSO_A FSO_CFE_1_N RFSO_B FSO_CFE_1_N
++ RFSO_A FSO_TOE_N RFSO_B FSO_TOE_N
+sel_rsp RSP_A SPEEDIN RSP_B SPEEDIN
+sel_tmu TMU_A TCLK1 TMU_B TCLK1
-+ TMU_A TCLK2 TMU_B TCLK2
++ TMU_A TCLK2 TMU_B TCLK2
+*/
+/* MOD_SEL0 */ /* 0 */ /* 1 */ /* 2 */ /* 3 */ /* 4 */ /* 5 */ /* 6 */ /* 7 */
++#define MOD_SEL0_11 FM(SEL_I2C3_0) FM(SEL_I2C3_1)
+#define MOD_SEL0_10 FM(SEL_HSCIF0_0) FM(SEL_HSCIF0_1)
+#define MOD_SEL0_9 FM(SEL_SCIF1_0) FM(SEL_SCIF1_1)
+#define MOD_SEL0_8 FM(SEL_CANFD0_0) FM(SEL_CANFD0_1)
@@ -2369,6 +2508,7 @@ index 0000000..a528b44
+
+#define PINMUX_MOD_SELS \
+\
++MOD_SEL0_11 \
+MOD_SEL0_10 \
+MOD_SEL0_9 \
+MOD_SEL0_8 \
@@ -3011,21 +3151,27 @@ index 0000000..a528b44
+/* - DU --------------------------------------------------------------------- */
+static const unsigned int du_rgb666_pins[] = {
+ /* R[7:0] */
-+ RCAR_GP_PIN(0, 5), RCAR_GP_PIN(0, 4), RCAR_GP_PIN(0, 3),
-+ RCAR_GP_PIN(0, 2), RCAR_GP_PIN(0, 1), RCAR_GP_PIN(0, 0),
++ RCAR_GP_PIN(0, 5), RCAR_GP_PIN(0, 4),
++ RCAR_GP_PIN(0, 3), RCAR_GP_PIN(0, 2),
++ RCAR_GP_PIN(0, 1), RCAR_GP_PIN(0, 0),
+ /* G[7:0] */
-+ RCAR_GP_PIN(0, 11), RCAR_GP_PIN(0, 10), RCAR_GP_PIN(0, 9),
-+ RCAR_GP_PIN(0, 8), RCAR_GP_PIN(0, 7), RCAR_GP_PIN(0, 6),
++ RCAR_GP_PIN(0, 11), RCAR_GP_PIN(0, 10),
++ RCAR_GP_PIN(0, 9), RCAR_GP_PIN(0, 8),
++ RCAR_GP_PIN(0, 7), RCAR_GP_PIN(0, 6),
+ /* B[7:0] */
-+ RCAR_GP_PIN(0, 17), RCAR_GP_PIN(0, 16), RCAR_GP_PIN(0, 15),
-+ RCAR_GP_PIN(0, 14), RCAR_GP_PIN(0, 13), RCAR_GP_PIN(0, 12),
++ RCAR_GP_PIN(0, 17), RCAR_GP_PIN(0, 16),
++ RCAR_GP_PIN(0, 15), RCAR_GP_PIN(0, 14),
++ RCAR_GP_PIN(0, 13), RCAR_GP_PIN(0, 12),
+};
+static const unsigned int du_rgb666_mux[] = {
-+ DU_DR7_MARK, DU_DR6_MARK, DU_DR5_MARK, DU_DR4_MARK,
++ DU_DR7_MARK, DU_DR6_MARK,
++ DU_DR5_MARK, DU_DR4_MARK,
+ DU_DR3_MARK, DU_DR2_MARK,
-+ DU_DG7_MARK, DU_DG6_MARK, DU_DG5_MARK, DU_DG4_MARK,
++ DU_DG7_MARK, DU_DG6_MARK,
++ DU_DG5_MARK, DU_DG4_MARK,
+ DU_DG3_MARK, DU_DG2_MARK,
-+ DU_DB7_MARK, DU_DB6_MARK, DU_DB5_MARK, DU_DB4_MARK,
++ DU_DB7_MARK, DU_DB6_MARK,
++ DU_DB5_MARK, DU_DB4_MARK,
+ DU_DB3_MARK, DU_DB2_MARK,
+};
+static const unsigned int du_clk_out_0_pins[] = {
@@ -3047,7 +3193,7 @@ index 0000000..a528b44
+ RCAR_GP_PIN(0, 20), RCAR_GP_PIN(0, 19),
+};
+static const unsigned int du_sync_mux[] = {
-+ DU_EXVSYNC_DU_VSYNC_MARK, DU_EXHSYNC_DU_HSYNC_MARK
++ DU_EXVSYNC_DU_VSYNC_MARK, DU_EXHSYNC_DU_HSYNC_MARK,
+};
+static const unsigned int du_oddf_pins[] = {
+ /* EXDISP/EXODDF/EXCDE */
@@ -3461,7 +3607,7 @@ index 0000000..a528b44
+ PWM1_A_MARK,
+};
+static const unsigned int pwm1_b_pins[] = {
-+ /* PWM */
++ /* PWM1 */
+ RCAR_GP_PIN(1, 22),
+};
+static const unsigned int pwm1_b_mux[] = {
@@ -3515,6 +3661,7 @@ index 0000000..a528b44
+static const unsigned int pwm4_b_mux[] = {
+ PWM4_B_MARK,
+};
++
+/* - SCIF0 ------------------------------------------------------------------ */
+static const unsigned int scif0_data_pins[] = {
+ /* RX, TX */
@@ -3530,7 +3677,7 @@ index 0000000..a528b44
+static const unsigned int scif0_clk_mux[] = {
+ SCK0_MARK,
+};
-+#if 0
++
+static const unsigned int scif0_ctrl_pins[] = {
+ /* RTS, CTS */
+ RCAR_GP_PIN(4, 3), RCAR_GP_PIN(4, 2),
@@ -3538,7 +3685,7 @@ index 0000000..a528b44
+static const unsigned int scif0_ctrl_mux[] = {
+ RTS0_N_TANS_MARK, CTS0_N_MARK,
+};
-+#endif
++
+/* - SCIF1 ------------------------------------------------------------------ */
+static const unsigned int scif1_data_a_pins[] = {
+ /* RX, TX */
@@ -3819,24 +3966,24 @@ index 0000000..a528b44
+ VI1_HSYNC_N_MARK, VI1_VSYNC_N_MARK,
+};
+static const unsigned int vin1_field_pins[] = {
++ /* FIELD */
+ RCAR_GP_PIN(3, 16),
+};
+static const unsigned int vin1_field_mux[] = {
-+ /* FIELD */
+ VI1_FIELD_MARK,
+};
+static const unsigned int vin1_clkenb_pins[] = {
++ /* CLKENB */
+ RCAR_GP_PIN(3, 1),
+};
+static const unsigned int vin1_clkenb_mux[] = {
-+ /* CLKENB */
+ VI1_CLKENB_MARK,
+};
+static const unsigned int vin1_clk_pins[] = {
++ /* CLK */
+ RCAR_GP_PIN(3, 0),
+};
+static const unsigned int vin1_clk_mux[] = {
-+ /* CLK */
+ VI1_CLK_MARK,
+};
+
@@ -3936,8 +4083,8 @@ index 0000000..a528b44
+ SH_PFC_PIN_GROUP(pwm4_a),
+ SH_PFC_PIN_GROUP(pwm4_b),
+ SH_PFC_PIN_GROUP(scif0_data),
-+ //SH_PFC_PIN_GROUP(scif0_clk),
-+ //SH_PFC_PIN_GROUP(scif0_ctrl),
++ SH_PFC_PIN_GROUP(scif0_clk),
++ SH_PFC_PIN_GROUP(scif0_ctrl),
+ SH_PFC_PIN_GROUP(scif1_data_a),
+ SH_PFC_PIN_GROUP(scif1_clk),
+ SH_PFC_PIN_GROUP(scif1_ctrl),
@@ -3996,9 +4143,9 @@ index 0000000..a528b44
+
+static const char * const canfd0_groups[] = {
+ "canfd0_data_a",
-+ "canfd0_clk_a",
++ "canfd_clk_a",
+ "canfd0_data_b",
-+ "canfd0_clk_b",
++ "canfd_clk_b",
+};
+
+static const char * const canfd1_groups[] = {
@@ -4137,26 +4284,26 @@ index 0000000..a528b44
+static const char * const scif0_groups[] = {
+ "scif0_data",
+// "scif0_clk",
-+// "scif0_ctl",
++// "scif0_ctrl",
+};
+
+static const char * const scif1_groups[] = {
+ "scif1_data_a",
+ "scif1_clk",
-+ "scif1_ctl",
++ "scif1_ctrl",
+ "scif1_data_b",
+};
+
+static const char * const scif3_groups[] = {
+ "scif3_data",
+ "scif3_clk",
-+ "scif3_ctl",
++ "scif3_ctrl",
+};
+
+static const char * const scif4_groups[] = {
+ "scif4_data",
+ "scif4_clk",
-+ "scif4_ctl",
++ "scif4_ctrl",
+};
+
+static const char * const mmc_groups[] = {
@@ -4200,64 +4347,9 @@ index 0000000..a528b44
+#define PIN2POCCTRL0_SHIFT(a) ({ \
+ int _gp = (a) >> 5; \
+ int _bit = (a) & 0x1f; \
-+ ((_gp == 3) && (_bit < 12)) ? _bit : \
-+ ((_gp == 4) && (_bit < 18)) ? _bit + 12 : -1; \
++ ((_gp == 3) && (_bit < 17)) ? _bit + 7 : -1; \
+})
+
-+#if 0
-+static int r8a7797_get_io_voltage(struct sh_pfc *pfc, unsigned int pin)
-+{
-+ void __iomem *reg;
-+ u32 data, mask;
-+ int shift;
-+
-+ /* Bits in POCCTRL0 are numbered in opposite order to pins */
-+ shift = PIN2POCCTRL0_SHIFT(pin);
-+
-+ if (WARN(shift < 0, "invalid pin %#x", pin))
-+ return -EINVAL;
-+
-+ reg = pfc->windows->virt + POCCTRL0;
-+ data = ioread32(reg);
-+
-+ mask = 0x1 << shift;
-+
-+ return (data & mask) ? 3300 : 1800;
-+}
-+
-+static int r8a7797_set_io_voltage(struct sh_pfc *pfc, unsigned int pin, u16 mV)
-+{
-+ void __iomem *reg;
-+ u32 data, mask;
-+ int shift;
-+
-+ /* Bits in POCCTRL0 are numbered in opposite order to pins */
-+ shift = PIN2POCCTRL0_SHIFT(pin);
-+
-+ if (WARN(shift < 0, "invalid pin %#x", pin))
-+ return -EINVAL;
-+
-+ if (mV != 1800 && mV != 3300)
-+ return -EINVAL;
-+
-+ reg = pfc->windows->virt + POCCTRL0;
-+ data = ioread32(reg);
-+
-+ mask = 0x1 << shift;
-+
-+ if (mV == 3300)
-+ data |= mask;
-+ else
-+ data &= ~mask;
-+
-+
-+ iowrite32(~data, pfc->windows->virt +
-+ (pfc->info->unlock_reg - pfc->windows->phys));
-+ iowrite32(data, reg);
-+
-+ return 0;
-+}
-+#endif
+
+static const struct sh_pfc_function pinmux_functions[] = {
+ SH_PFC_FUNCTION(avb0),
@@ -4601,25 +4693,29 @@ index 0000000..a528b44
+
+#define F_(x, y) x,
+#define FM(x) FN_##x,
-+ { PINMUX_CFG_REG_VAR("MOD_SEL0", 0xe6060500, 32,
-+ 4, 4, 4, 4, 1,
-+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) {
-+ /* RESERVED 31, 30, 29, 28 */
-+ 0, 0, 0, 0, 0, 0, 0, 0,
-+ 0, 0, 0, 0, 0, 0, 0, 0,
-+ /* RESERVED 27, 26, 25, 24 */
-+ 0, 0, 0, 0, 0, 0, 0, 0,
-+ 0, 0, 0, 0, 0, 0, 0, 0,
-+ /* RESERVED 23, 22, 21, 20 */
-+ 0, 0, 0, 0, 0, 0, 0, 0,
-+ 0, 0, 0, 0, 0, 0, 0, 0,
-+ /* RESERVED 19, 18, 17, 16 */
-+ 0, 0, 0, 0, 0, 0, 0, 0,
-+ 0, 0, 0, 0, 0, 0, 0, 0,
-+ /* RESERVED 15, 14, 13, 12 */
-+ 0, 0, 0, 0, 0, 0, 0, 0,
-+ 0, 0, 0, 0, 0, 0, 0, 0,
-+ 0, 0, /* RESERVED 11 */
++ { PINMUX_CFG_REG("MOD_SEL0", 0xe6060500, 32, 1) {
++ /* RESERVED 31..12 */
++ 0, 0,
++ 0, 0,
++ 0, 0,
++ 0, 0,
++ 0, 0,
++ 0, 0,
++ 0, 0,
++ 0, 0,
++ 0, 0,
++ 0, 0,
++ 0, 0,
++ 0, 0,
++ 0, 0,
++ 0, 0,
++ 0, 0,
++ 0, 0,
++ 0, 0,
++ 0, 0,
++ 0, 0,
++ 0, 0,
++ MOD_SEL0_11
+ MOD_SEL0_10
+ MOD_SEL0_9
+ MOD_SEL0_8
@@ -4635,11 +4731,20 @@ index 0000000..a528b44
+ { },
+};
+
++static int r8a7797_pin_to_pocctrl(struct sh_pfc *pfc, unsigned int pin, u32 *pocctrl)
++{
++ int bit = -EINVAL;
++
++ *pocctrl = 0xe6060384;
++
++ if (pin >= RCAR_GP_PIN(3, 0) && pin <= RCAR_GP_PIN(3, 16))
++ bit = (pin & 0x1f) + 7;
++
++ return bit;
++}
++
+static const struct sh_pfc_soc_operations pinmux_ops = {
-+#if 0
-+ .get_io_voltage = r8a7797_get_io_voltage,
-+ .set_io_voltage = r8a7797_set_io_voltage,
-+#endif
++ .pin_to_pocctrl = r8a7797_pin_to_pocctrl,
+};
+
+const struct sh_pfc_soc_info r8a7797_pinmux_info = {
@@ -4699,10 +4804,18 @@ index c6a1855..a673a00 100644
PORT_GP_CFG_18(bank, fn, sfx, cfg), \
PORT_GP_CFG_1(bank, 18, fn, sfx, cfg), \
diff --git a/drivers/soc/renesas/Makefile b/drivers/soc/renesas/Makefile
-index 504fb05..df143fe 100644
+index 504fb05..37cca0b 100644
--- a/drivers/soc/renesas/Makefile
+++ b/drivers/soc/renesas/Makefile
-@@ -16,11 +16,14 @@ obj-$(CONFIG_ARCH_R8A7793) += rcar-sysc.o r8a7791-sysc.o
+@@ -4,6 +4,7 @@ obj-$(CONFIG_ARCH_RCAR_GEN1) += rcar-rst.o
+ obj-$(CONFIG_ARCH_RCAR_GEN2) += rcar-rst.o
+ obj-$(CONFIG_ARCH_R8A7795) += rcar-rst.o
+ obj-$(CONFIG_ARCH_R8A7796) += rcar-rst.o
++obj-$(CONFIG_ARCH_R8A7797) += rcar-rst.o
+
+ obj-$(CONFIG_ARCH_R8A7743) += rcar-sysc.o r8a7743-sysc.o
+ obj-$(CONFIG_ARCH_R8A7745) += rcar-sysc.o r8a7745-sysc.o
+@@ -16,11 +17,14 @@ obj-$(CONFIG_ARCH_R8A7793) += rcar-sysc.o r8a7791-sysc.o
obj-$(CONFIG_ARCH_R8A7794) += rcar-sysc.o r8a7794-sysc.o
obj-$(CONFIG_ARCH_R8A7795) += rcar-sysc.o r8a7795-sysc.o
obj-$(CONFIG_ARCH_R8A7796) += rcar-sysc.o r8a7796-sysc.o
@@ -4762,6 +4875,18 @@ index 0000000..b71bdedb
+ .areas = r8a7797_areas,
+ .num_areas = ARRAY_SIZE(r8a7797_areas),
+};
+diff --git a/drivers/soc/renesas/rcar-rst.c b/drivers/soc/renesas/rcar-rst.c
+index a6d1c26..2e87293 100644
+--- a/drivers/soc/renesas/rcar-rst.c
++++ b/drivers/soc/renesas/rcar-rst.c
+@@ -41,6 +41,7 @@ struct rst_config {
+ /* R-Car Gen3 is handled like R-Car Gen2 */
+ { .compatible = "renesas,r8a7795-rst", .data = &rcar_rst_gen2 },
+ { .compatible = "renesas,r8a7796-rst", .data = &rcar_rst_gen2 },
++ { .compatible = "renesas,r8a7797-rst", .data = &rcar_rst_gen2 },
+ { /* sentinel */ }
+ };
+
diff --git a/drivers/soc/renesas/rcar-sysc.c b/drivers/soc/renesas/rcar-sysc.c
index 042500a..e6165b6 100644
--- a/drivers/soc/renesas/rcar-sysc.c
diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch
index f2f15aa..210a0fc 100644
--- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch
+++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch
@@ -16,10 +16,11 @@ Kingfisher board on R8A7795 SoC
Kingfisher board on R8A7796 SoC
Videobox board on R8A7795 ES1.x SoC
Videobox board on R8A7795 SoC
+Eagle board on R8A7797 SoC
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
---
- arch/arm64/boot/dts/renesas/Makefile | 13 +
+ arch/arm64/boot/dts/renesas/Makefile | 14 +
arch/arm64/boot/dts/renesas/legacy/Makefile | 7 +
.../renesas/legacy/r8a7795-es1-h3ulcb-kf-v0.dts | 1717 +++++++++++++++++
.../renesas/legacy/r8a7795-es1-h3ulcb-kf-v1.dts | 440 +++++
@@ -44,11 +45,12 @@ Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts | 1430 +++++++++++++++
.../arm64/boot/dts/renesas/r8a7796-m3ulcb-view.dts | 287 +++
.../boot/dts/renesas/r8a7796-salvator-x-view.dts | 318 ++++
+ arch/arm64/boot/dts/renesas/r8a7797-eagle.dts | 620 +++++++
arch/arm64/boot/dts/renesas/ulcb-kf-cmos.dtsi | 75 +
arch/arm64/boot/dts/renesas/ulcb-kf-rpi.dtsi | 77 +
arch/arm64/boot/dts/renesas/ulcb-kf-sd3.dtsi | 46 +
arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi | 515 ++++++
- 29 files changed, 18975 insertions(+)
+ 30 files changed, 19596 insertions(+)
create mode 100644 arch/arm64/boot/dts/renesas/legacy/Makefile
create mode 100644 arch/arm64/boot/dts/renesas/legacy/r8a7795-es1-h3ulcb-kf-v0.dts
create mode 100644 arch/arm64/boot/dts/renesas/legacy/r8a7795-es1-h3ulcb-kf-v1.dts
@@ -73,16 +75,17 @@ Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts
create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-view.dts
create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-salvator-x-view.dts
+ create mode 100644 arch/arm64/boot/dts/renesas/r8a7797-eagle.dts
create mode 100644 arch/arm64/boot/dts/renesas/ulcb-kf-cmos.dtsi
create mode 100644 arch/arm64/boot/dts/renesas/ulcb-kf-rpi.dtsi
create mode 100644 arch/arm64/boot/dts/renesas/ulcb-kf-sd3.dtsi
create mode 100644 arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
-index 32fb4d9..9bb5848 100644
+index 32fb4d9..5fffb48 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
-@@ -4,5 +4,18 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb r8a7795-es1-h3ulcb.dtb
+@@ -4,5 +4,19 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb r8a7795-es1-h3ulcb.dtb
dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb
dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb
@@ -95,6 +98,7 @@ index 32fb4d9..9bb5848 100644
+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-had-alfa.dtb r8a7795-h3ulcb-had-beta.dtb r8a7795-es1-h3ulcb-had-alfa.dtb r8a7795-es1-h3ulcb-had-beta.dtb
+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb r8a7795-es1-h3ulcb-kf.dtb
+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-vb.dtb r8a7795-es1-h3ulcb-vb.dtb
++dtb-$(CONFIG_ARCH_R8A7797) += r8a7797-eagle.dtb
+
+# ADAS legacy boards
+subdir-y := legacy
@@ -116,7 +120,7 @@ index 0000000..f7de935
+clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/renesas/legacy/r8a7795-es1-h3ulcb-kf-v0.dts b/arch/arm64/boot/dts/renesas/legacy/r8a7795-es1-h3ulcb-kf-v0.dts
new file mode 100644
-index 0000000..b3ac95aa4
+index 0000000..cd23797
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/legacy/r8a7795-es1-h3ulcb-kf-v0.dts
@@ -0,0 +1,1717 @@
@@ -1839,10 +1843,10 @@ index 0000000..b3ac95aa4
+//#include "../ulcb-kf-cmos.dtsi"
diff --git a/arch/arm64/boot/dts/renesas/legacy/r8a7795-es1-h3ulcb-kf-v1.dts b/arch/arm64/boot/dts/renesas/legacy/r8a7795-es1-h3ulcb-kf-v1.dts
new file mode 100644
-index 0000000..1672384
+index 0000000..c012d2f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/legacy/r8a7795-es1-h3ulcb-kf-v1.dts
-@@ -0,0 +1,440 @@
+@@ -0,0 +1,441 @@
+/*
+ * Device Tree Source for the H3ULCB Kingfisher V1 board on r8a7795 ES1.x
+ *
@@ -2133,6 +2137,7 @@ index 0000000..1672384
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+ adi,clock-delay = <1200>;
++ adi,clock-max-rate = <100000>;
+
+ ports {
+ #address-cells = <1>;
@@ -2285,7 +2290,7 @@ index 0000000..1672384
+};
diff --git a/arch/arm64/boot/dts/renesas/legacy/r8a7795-h3ulcb-kf-v0.dts b/arch/arm64/boot/dts/renesas/legacy/r8a7795-h3ulcb-kf-v0.dts
new file mode 100644
-index 0000000..2a7ded7
+index 0000000..15e20b1
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/legacy/r8a7795-h3ulcb-kf-v0.dts
@@ -0,0 +1,1724 @@
@@ -4015,10 +4020,10 @@ index 0000000..2a7ded7
+//#include "../ulcb-kf-cmos.dtsi"
diff --git a/arch/arm64/boot/dts/renesas/legacy/r8a7795-h3ulcb-kf-v1.dts b/arch/arm64/boot/dts/renesas/legacy/r8a7795-h3ulcb-kf-v1.dts
new file mode 100644
-index 0000000..119f58c
+index 0000000..7fc2ede
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/legacy/r8a7795-h3ulcb-kf-v1.dts
-@@ -0,0 +1,464 @@
+@@ -0,0 +1,465 @@
+/*
+ * Device Tree Source for the H3ULCB Kingfisher V1 board
+ *
@@ -4328,6 +4333,7 @@ index 0000000..119f58c
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+ adi,clock-delay = <1200>;
++ adi,clock-max-rate = <100000>;
+
+ ports {
+ #address-cells = <1>;
@@ -4485,7 +4491,7 @@ index 0000000..119f58c
+};
diff --git a/arch/arm64/boot/dts/renesas/legacy/r8a7796-m3ulcb-kf-v0.dts b/arch/arm64/boot/dts/renesas/legacy/r8a7796-m3ulcb-kf-v0.dts
new file mode 100644
-index 0000000..0ac577a
+index 0000000..9da289b
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/legacy/r8a7796-m3ulcb-kf-v0.dts
@@ -0,0 +1,1214 @@
@@ -5705,10 +5711,10 @@ index 0000000..0ac577a
+#include "../ulcb-kf-cmos.dtsi"
diff --git a/arch/arm64/boot/dts/renesas/legacy/r8a7796-m3ulcb-kf-v1.dts b/arch/arm64/boot/dts/renesas/legacy/r8a7796-m3ulcb-kf-v1.dts
new file mode 100644
-index 0000000..1344152
+index 0000000..9b173a2
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/legacy/r8a7796-m3ulcb-kf-v1.dts
-@@ -0,0 +1,464 @@
+@@ -0,0 +1,465 @@
+/*
+ * Device Tree Source for the M3ULCB Kingfisher V1 board
+ *
@@ -6018,6 +6024,7 @@ index 0000000..1344152
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+ adi,clock-delay = <1200>;
++ adi,clock-max-rate = <100000>;
+
+ ports {
+ #address-cells = <1>;
@@ -6463,10 +6470,10 @@ index 0000000..d50ff7a
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts
new file mode 100644
-index 0000000..f117af0
+index 0000000..7203407
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts
-@@ -0,0 +1,1940 @@
+@@ -0,0 +1,1941 @@
+/*
+ * Device Tree Source for the H3ULCB Kingfisher board on r8a7795 ES1.x
+ *
@@ -7025,6 +7032,7 @@ index 0000000..f117af0
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+ adi,clock-delay = <1200>;
++ adi,clock-max-rate = <100000>;
+
+ ports {
+ #address-cells = <1>;
@@ -11594,10 +11602,10 @@ index 0000000..4a00426
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts
new file mode 100644
-index 0000000..5b61059
+index 0000000..f6c58c9
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts
-@@ -0,0 +1,1940 @@
+@@ -0,0 +1,1941 @@
+/*
+ * Device Tree Source for the H3ULCB Kingfisher board on r8a7795
+ *
@@ -12156,6 +12164,7 @@ index 0000000..5b61059
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+ adi,clock-delay = <1200>;
++ adi,clock-max-rate = <100000>;
+
+ ports {
+ #address-cells = <1>;
@@ -16443,10 +16452,10 @@ index 0000000..fb12a39f3
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts
new file mode 100644
-index 0000000..a037f16
+index 0000000..8c2607f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts
-@@ -0,0 +1,1430 @@
+@@ -0,0 +1,1431 @@
+/*
+ * Device Tree Source for the M3ULCB Kingfisher board on r8a7796
+ *
@@ -17005,6 +17014,7 @@ index 0000000..a037f16
+ adi,input-style = <1>;
+ adi,input-justification = "evenly";
+ adi,clock-delay = <1200>;
++ adi,clock-max-rate = <100000>;
+
+ ports {
+ #address-cells = <1>;
@@ -18494,6 +18504,632 @@ index 0000000..cc6866c
+ pinctrl-names = "default";
+ status = "okay";
+};
+diff --git a/arch/arm64/boot/dts/renesas/r8a7797-eagle.dts b/arch/arm64/boot/dts/renesas/r8a7797-eagle.dts
+new file mode 100644
+index 0000000..5aeb3b50
+--- /dev/null
++++ b/arch/arm64/boot/dts/renesas/r8a7797-eagle.dts
+@@ -0,0 +1,620 @@
++/*
++ * Device Tree Source for the Eagle board
++ *
++ * Copyright (C) 2016-2017 Renesas Electronics Corp.
++ *
++ * This file is licensed under the terms of the GNU General Public License
++ * version 2. This program is licensed "as is" without any warranty of any
++ * kind, whether express or implied.
++ */
++
++/dts-v1/;
++#include "r8a7797.dtsi"
++#include <dt-bindings/gpio/gpio.h>
++
++/ {
++ model = "Renesas Eagle board based on r8a7797";
++ compatible = "renesas,eagle", "renesas,r8a7797";
++
++ aliases {
++ serial0 = &scif0;
++ ethernet0 = &avb;
++ };
++
++ chosen {
++ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
++ stdout-path = "serial0:115200n8";
++ };
++
++ memory@48000000 {
++ device_type = "memory";
++ /* first 128MB is reserved for secure area. */
++ reg = <0x0 0x48000000 0x0 0x38000000>;
++ };
++
++ reserved-memory {
++ #address-cells = <2>;
++ #size-cells = <2>;
++ ranges;
++
++ /* device specific region for Lossy Decompression */
++ lossy_decompress: linux,lossy_decompress {
++ no-map;
++ reg = <0x00000000 0x64000000 0x0 0x03000000>;
++ };
++
++ /* global autoconfigured region for contiguous allocations */
++ linux,cma {
++ compatible = "shared-dma-pool";
++ reusable;
++ reg = <0x00000000 0x67000000 0x0 0x09000000>;
++ linux,cma-default;
++ };
++
++ /* device specific region for contiguous allocations */
++ linux,multimedia {
++ compatible = "shared-dma-pool";
++ reusable;
++ reg = <0x00000000 0x70000000 0x0 0x10000000>;
++ };
++ };
++
++ mmngr {
++ compatible = "renesas,mmngr";
++ memory-region = <&lossy_decompress>;
++ };
++
++ mmngrbuf {
++ compatible = "renesas,mmngrbuf";
++ };
++
++ x12_clk: x12_clk {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <24576000>;
++ };
++
++ fixedregulator3v3: regulator@0 {
++ compatible = "regulator-fixed";
++ regulator-name = "fixed-3.3V";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ fixedregulator1v8: regulator@1 {
++ compatible = "regulator-fixed";
++ regulator-name = "fixed-1.8V";
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-boot-on;
++ regulator-always-on;
++ };
++
++ vspm_if {
++ compatible = "renesas,vspm_if";
++ };
++
++ lvds-encoder {
++ compatible = "thine,thc63lvdm83d";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ reg = <0>;
++ lvds_enc_in: endpoint {
++ remote-endpoint = <&du_out_lvds0>;
++ };
++ };
++ port@1 {
++ reg = <1>;
++ lvds_enc_out: endpoint {
++ remote-endpoint = <&lvds_in>;
++ };
++ };
++ };
++ };
++
++ lvds {
++ compatible = "lvds-connector";
++
++ width-mm = <210>;
++ height-mm = <158>;
++
++ panel-timing {
++ clock-frequency = <133000000>;
++ hactive = <1024>;
++ vactive = <768>;
++ hsync-len = <136>;
++ hfront-porch = <20>;
++ hback-porch = <160>;
++ vfront-porch = <3>;
++ vback-porch = <29>;
++ vsync-len = <6>;
++ };
++
++ port {
++ lvds_in: endpoint {
++ remote-endpoint = <&lvds_enc_out>;
++ };
++ };
++ };
++
++ hdmi-out {
++ compatible = "hdmi-connector";
++ type = "a";
++
++ port {
++ hdmi_con: endpoint {
++ remote-endpoint = <&adv7511_out>;
++ };
++ };
++ };
++
++ dclkin_p0: clock_out0 {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <148500000>;
++ };
++
++ x21_clk: x21-clock {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <33000000>;
++ };
++
++ x22_clk: x22-clock {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <33000000>;
++ };
++
++ dclkin_p3: clock_out1 {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <108000000>;
++ };
++
++ msiof_ref_clk: msiof-ref-clock {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <66666666>;
++ };
++};
++
++&du {
++ pinctrl-0 = <&du_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ ports {
++ port@0 {
++ endpoint {
++ remote-endpoint = <&adv7511_in>;
++ };
++ };
++ };
++};
++
++&extal_clk {
++ clock-frequency = <16666666>;
++};
++
++&extalr_clk {
++ clock-frequency = <32768>;
++};
++
++&pfc {
++ pinctrl-0 = <&scif_clk_pins>;
++ pinctrl-names = "default";
++
++ scif0_pins: scif0 {
++ groups = "scif0_data";
++ function = "scif0";
++ };
++
++ scif_clk_pins: scif_clk {
++ groups = "scif_clk_b";
++ function = "scif_clk";
++ };
++
++ i2c0_pins: i2c0 {
++ groups = "i2c0";
++ function = "i2c0";
++ };
++
++ i2c3_pins: i2c3 {
++ groups = "i2c3";
++ function = "i2c3";
++ };
++
++ avb_pins: avb {
++ groups = "avb0_mdc", "avb0_rx_ctrl", "avb0_rxc", "avb0_rd4", "avb0_tx_ctrl", "avb0_txc", "avb0_td4", "avb0_txcrefclk";
++ function = "avb0";
++ };
++
++ du_pins: du {
++ groups = "du_rgb666", "du_sync", "du_clk_out_0", "du_disp";
++ function = "du";
++ };
++
++ mmc0_pins_1v8: mmc0_1v8 {
++ groups = "mmc_data8", "mmc_ctrl";
++ function = "mmc";
++ power-source = <1800>;
++ };
++};
++
++&scif0 {
++ pinctrl-0 = <&scif0_pins>;
++ pinctrl-names = "default";
++
++ status = "okay";
++};
++
++&scif_clk {
++ clock-frequency = <14745600>;
++ status = "okay";
++};
++
++&i2c0 {
++ pinctrl-0 = <&i2c0_pins>;
++ pinctrl-names = "default";
++
++ status = "okay";
++ clock-frequency = <400000>;
++
++ hdmi@39{
++ compatible = "adi,adv7511w";
++ #sound-dai-cells = <0>;
++ reg = <0x39>;
++ interrupt-parent = <&gpio1>;
++ interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
++
++ adi,input-depth = <8>;
++ adi,input-colorspace = "rgb";
++ adi,input-clock = "1x";
++ adi,input-style = <1>;
++ adi,input-justification = "evenly";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ reg = <0>;
++ adv7511_in: endpoint {
++ remote-endpoint = <&lvds_enc_out>;
++ };
++ };
++ port@1 {
++ reg = <1>;
++ adv7511_out: endpoint {
++ remote-endpoint = <&hdmi_con>;
++ };
++ };
++ };
++ };
++
++ gpio_ext: pca9654@20 {
++ compatible = "onsemi,pca9654";
++ reg = <0x20>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ };
++};
++
++&i2c3 {
++ pinctrl-0 = <&i2c3_pins>;
++ pinctrl-names = "default";
++
++ status = "okay";
++ clock-frequency = <400000>;
++
++ ov106xx@0 {
++ compatible = "ovti,ov106xx";
++ reg = <0x60>;
++
++ port@0 {
++ ov106xx_in0: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin0ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep0>;
++ };
++ };
++ };
++
++ ov106xx@1 {
++ compatible = "ovti,ov106xx";
++ reg = <0x61>;
++
++ port@0 {
++ ov106xx_in1: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin1ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep1>;
++ };
++ };
++ };
++
++ ov106xx@2 {
++ compatible = "ovti,ov106xx";
++ reg = <0x62>;
++
++ port@0 {
++ ov106xx_in2: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin2ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_max9286_des0ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep2>;
++ };
++ };
++ };
++
++ ov106xx@3 {
++ compatible = "ovti,ov106xx";
++ reg = <0x63>;
++
++ port@0 {
++ ov106xx_in3: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&vin3ep0>;
++ };
++ };
++ port@1 {
++ ov106xx_des0ep3: endpoint {
++ remote-endpoint = <&max9286_des0ep3>;
++ };
++ };
++ };
++
++ max9286-max9271@0 {
++ compatible = "maxim,max9286-max9271";
++ reg = <0x48>;
++ gpios = <&gpio_ext 0 GPIO_ACTIVE_LOW>; /* CSI0 DE_PDn */
++ maxim,gpio0 = <0>;
++ maxim,sensor_delay = <100>;
++ maxim,links = <4>;
++ maxim,lanes = <4>;
++ maxim,resetb-gpio = <1>;
++ maxim,fsync-mode = "automatic";
++ maxim,timeout = <100>;
++
++ port@0 {
++ max9286_des0ep0: endpoint@0 {
++ max9271-addr = <0x50>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ max9286_des0ep1: endpoint@1 {
++ max9271-addr = <0x51>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ max9286_des0ep2: endpoint@2 {
++ max9271-addr = <0x52>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in2>;
++ };
++ max9286_des0ep3: endpoint@3 {
++ max9271-addr = <0x53>;
++ dvp-order = <1>;
++ remote-endpoint = <&ov106xx_in3>;
++ };
++ };
++ port@1 {
++ max9286_csi0ep0: endpoint {
++ csi-rate = <700>;
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ };
++};
++
++&mmc0 {
++ pinctrl-0 = <&mmc0_pins_1v8>;
++ pinctrl-1 = <&mmc0_pins_1v8>;
++ pinctrl-names = "default", "state_uhs";
++
++ vmmc-supply = <&fixedregulator3v3>;
++ vqmmc-supply = <&fixedregulator1v8>;
++ bus-width = <8>;
++ status = "okay";
++};
++
++&wdt0 {
++ status = "okay";
++};
++
++&avb {
++ pinctrl-0 = <&avb_pins>;
++ pinctrl-names = "default";
++ renesas,no-ether-link;
++ phy-handle = <&phy0>;
++ status = "okay";
++ phy-int-gpio = <&gpio1 17 GPIO_ACTIVE_LOW>;
++
++ phy0: ethernet-phy@0 {
++ rxc-skew-ps = <1500>;
++ rxdv-skew-ps = <420>; /* default */
++ rxd0-skew-ps = <420>; /* default */
++ rxd1-skew-ps = <420>; /* default */
++ rxd2-skew-ps = <420>; /* default */
++ rxd3-skew-ps = <420>; /* default */
++ txc-skew-ps = <900>; /* default */
++ txen-skew-ps = <420>; /* default */
++ txd0-skew-ps = <420>; /* default */
++ txd1-skew-ps = <420>; /* default */
++ txd2-skew-ps = <420>; /* default */
++ txd3-skew-ps = <420>; /* default */
++ reg = <0>;
++ interrupt-parent = <&gpio1>;
++ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
++ max-speed = <1000>;
++ };
++};
++
++&vin0 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin0ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <0>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in0>;
++ };
++ };
++ port@1 {
++ csi0ep0: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin0_max9286_des0ep0: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep0>;
++ };
++ };
++ };
++};
++
++&vin1 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin1ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <1>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in1>;
++ };
++ };
++ port@1 {
++ csi0ep1: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin1_max9286_des0ep1: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep1>;
++ };
++ };
++ };
++};
++
++&vin2 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin2ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <2>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in2>;
++ };
++ };
++ port@1 {
++ csi0ep2: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin2_max9286_des0ep2: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep2>;
++ };
++ };
++ };
++};
++
++&vin3 {
++ status = "okay";
++
++ ports {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ port@0 {
++ vin3ep0: endpoint {
++ csi,select = "csi40";
++ virtual,channel = <3>;
++ data-lanes = <1 2 3 4>;
++ remote-endpoint = <&ov106xx_in3>;
++ };
++ };
++ port@1 {
++ csi0ep3: endpoint {
++ remote-endpoint = <&csi2_40_ep>;
++ };
++ };
++ port@2 {
++ vin3_max9286_des0ep3: endpoint@0 {
++ remote-endpoint = <&max9286_des0ep3>;
++ };
++ };
++ };
++};
++
++&csi2_40 {
++ status = "okay";
++
++ virtual,channel {
++ csi2_vc0 {
++ data,type = "ycbcr422";
++ receive,vc = <0>;
++ };
++ csi2_vc1 {
++ data,type = "ycbcr422";
++ receive,vc = <1>;
++ };
++ csi2_vc2 {
++ data,type = "ycbcr422";
++ receive,vc = <2>;
++ };
++ csi2_vc3 {
++ data,type = "ycbcr422";
++ receive,vc = <3>;
++ };
++ };
++
++ port {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ csi2_40_ep: endpoint {
++ clock-lanes = <0>;
++ data-lanes = <1 2 3 4>;
++ csi-rate = <300>;
++ };
++ };
++};
++
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-cmos.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-cmos.dtsi
new file mode 100644
index 0000000..2145f5e
@@ -18660,7 +19296,7 @@ index 0000000..bcd9865
+};
diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-sd3.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-sd3.dtsi
new file mode 100644
-index 0000000..216e800
+index 0000000..b854216
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/ulcb-kf-sd3.dtsi
@@ -0,0 +1,46 @@
diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0064-ADV7511-limit-maximum-pixelclock.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0064-ADV7511-limit-maximum-pixelclock.patch
index eca5884..3ca9284 100644
--- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0064-ADV7511-limit-maximum-pixelclock.patch
+++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0064-ADV7511-limit-maximum-pixelclock.patch
@@ -4,26 +4,73 @@ Date: Fri, 9 Jun 2017 20:12:26 +0300
Subject: [PATCH] ADV7511: limit maximum pixelclock
DU0 (RGB) supports clock freq up to 100MHz only.
-Temporary set limitation in the driver since it KF is the only user atm
+Add ability to set max clock via dts.
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
---
- drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
+ drivers/gpu/drm/bridge/adv7511/adv7511.h | 3 +++
+ drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 6 +++++-
+ 2 files changed, 8 insertions(+), 1 deletion(-)
+diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h b/drivers/gpu/drm/bridge/adv7511/adv7511.h
+index 161c923..12ee238 100644
+--- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
++++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
+@@ -242,6 +242,7 @@ enum adv7511_sync_polarity {
+ * @input_style: The input component arrangement variant
+ * @input_justification: Video input format bit justification
+ * @clock_delay: Clock delay for the input clock (in ps)
++ * @clock_max_rate: Clock maximum rate (in Hz)
+ * @embedded_sync: Video input uses BT.656-style embedded sync
+ * @sync_pulse: Select the sync pulse
+ * @vsync_polarity: vsync input signal configuration
+@@ -255,6 +256,7 @@ struct adv7511_link_config {
+ enum adv7511_input_justification input_justification;
+
+ int clock_delay;
++ int clock_max_rate;
+
+ bool embedded_sync;
+ enum adv7511_input_sync_pulse sync_pulse;
+@@ -307,6 +309,7 @@ struct adv7511 {
+ bool powered;
+
+ struct drm_display_mode curr_mode;
++ int clock_max_rate;
+
+ unsigned int f_tmds;
+
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
-index 9698c21813dc..8914d64b7589 100644
+index 41b45de..5dfa619 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
-@@ -647,7 +647,7 @@ adv7511_detect(struct adv7511 *adv7511, struct drm_connector *connector)
+@@ -323,6 +323,7 @@ static void adv7511_set_link_config(struct adv7511 *adv7511,
+ adv7511->hsync_polarity = config->hsync_polarity;
+ adv7511->vsync_polarity = config->vsync_polarity;
+ adv7511->rgb = config->input_colorspace == HDMI_COLORSPACE_RGB;
++ adv7511->clock_max_rate = config->clock_max_rate;
+ }
+
+ static void adv7511_power_on(struct adv7511 *adv7511)
+@@ -621,7 +622,7 @@ static int adv7511_get_modes(struct adv7511 *adv7511,
static int adv7511_mode_valid(struct adv7511 *adv7511,
struct drm_display_mode *mode)
{
- if (mode->clock > 165000)
-+ if (mode->clock > 100000)
++ if (mode->clock > adv7511->clock_max_rate)
return MODE_CLOCK_HIGH;
return MODE_OK;
+@@ -917,6 +918,9 @@ static int adv7511_parse_dt(struct device_node *np,
+ if (config->clock_delay < -1200 || config->clock_delay > 1600)
+ return -EINVAL;
+
++ if (of_property_read_u32(np, "adi,clock-max-rate", &config->clock_max_rate))
++ config->clock_max_rate = 166000;
++
+ config->embedded_sync = of_property_read_bool(np, "adi,embedded-sync");
+
+ /* Hardcode the sync pulse configurations for now. */
--
-2.13.0
+1.9.1