Merge branch 'pyro' into eel

7 files changed, 733 insertions, 0 deletions

diff --git a/meta-rcar-gen3-adas/docs/sample/conf/eagle/linaro-gcc/bsp/bblayers.conf b/meta-rcar-gen3-adas/docs/sample/conf/eagle/linaro-gcc/bsp/bblayers.conf
new file mode 100644
index 0000000..96ff8ad
--- /dev/null
+++ b/meta-rcar-gen3-adas/docs/sample/conf/eagle/linaro-gcc/bsp/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/meta-rcar-gen3-adas/docs/sample/conf/eagle/linaro-gcc/bsp/local.conf b/meta-rcar-gen3-adas/docs/sample/conf/eagle/linaro-gcc/bsp/local.conf
new file mode 100644
index 0000000..a1c3b2a
--- /dev/null
+++ b/meta-rcar-gen3-adas/docs/sample/conf/eagle/linaro-gcc/bsp/local.conf
@@ -0,0 +1,267 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "eagle"
+
+SOC_FAMILY = "r8a7797"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+#   - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-5.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Mask graphic Pkgs
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Linux ICCOM driver (RCG3ZLIDL4001ZNO)
+# Linux ICCOM library (RCG3ZLILL4001ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+IMAGE_INSTALL_remove = "optee-linuxdriver optee-linuxdriver-armtz optee-client"
diff --git a/meta-rcar-gen3-adas/docs/sample/conf/v3msk/linaro-gcc/bsp/bblayers.conf b/meta-rcar-gen3-adas/docs/sample/conf/v3msk/linaro-gcc/bsp/bblayers.conf
new file mode 100644
index 0000000..96ff8ad
--- /dev/null
+++ b/meta-rcar-gen3-adas/docs/sample/conf/v3msk/linaro-gcc/bsp/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+  ${TOPDIR}/../poky/meta \
+  ${TOPDIR}/../poky/meta-poky \
+  ${TOPDIR}/../poky/meta-yocto-bsp \
+  ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+  ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+  ${TOPDIR}/../meta-linaro/meta-optee \
+  ${TOPDIR}/../meta-openembedded/meta-oe \
+  "
diff --git a/meta-rcar-gen3-adas/docs/sample/conf/v3msk/linaro-gcc/bsp/local.conf b/meta-rcar-gen3-adas/docs/sample/conf/v3msk/linaro-gcc/bsp/local.conf
new file mode 100644
index 0000000..75b33e7
--- /dev/null
+++ b/meta-rcar-gen3-adas/docs/sample/conf/v3msk/linaro-gcc/bsp/local.conf
@@ -0,0 +1,267 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for 
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "v3msk"
+
+SOC_FAMILY = "r8a7797"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing 
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream 
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+#  - 'package_deb' for debian style deb files
+#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+#  - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+#  "dbg-pkgs"       - add -dbg packages for all installed packages
+#                     (adds symbol information for debugging/profiling)
+#  "dev-pkgs"       - add -dev packages for all installed packages
+#                     (useful if you want to develop against libs in the image)
+#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
+#                     (useful if you want to run the package test suites)
+#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
+#  "tools-debug"    - add debugging tools (gdb, strace)
+#  "eclipse-debug"  - add Eclipse remote debugging support
+#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
+#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+#  "debug-tweaks"   - make an image suitable for development
+#                     e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+#   - 'buildstats' collect build statistics
+#   - 'image-mklibs' to reduce shared library files size for an image
+#   - 'image-prelink' in order to prelink the filesystem image
+#   - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+    STOPTASKS,${TMPDIR},1G,100K \
+    STOPTASKS,${DL_DIR},1G,100K \
+    STOPTASKS,${SSTATE_DIR},1G,100K \
+    STOPTASKS,/tmp,100M,100K \
+    ABORT,${TMPDIR},100M,1K \
+    ABORT,${DL_DIR},100M,1K \
+    ABORT,${SSTATE_DIR},100M,1K \
+    ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-5.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Mask graphic Pkgs
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Linux ICCOM driver (RCG3ZLIDL4001ZNO)
+# Linux ICCOM library (RCG3ZLILL4001ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+IMAGE_INSTALL_remove = "optee-linuxdriver optee-linuxdriver-armtz optee-client"
diff --git a/meta-rcar-gen3-adas/docs/sample/patch/0001-meta-linaro-python-wand-fix-BB_NO_NETWORK-build.patch b/meta-rcar-gen3-adas/docs/sample/patch/0001-meta-linaro-python-wand-fix-BB_NO_NETWORK-build.patch
new file mode 100644
index 0000000..9be94b0
--- /dev/null
+++ b/meta-rcar-gen3-adas/docs/sample/patch/0001-meta-linaro-python-wand-fix-BB_NO_NETWORK-build.patch
@@ -0,0 +1,28 @@
+From 749accec83f1b300fc14b5e31fd11c372ca03927 Mon Sep 17 00:00:00 2001
+From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
+Date: Sun, 17 Sep 2017 00:31:15 +0300
+Subject: [PATCH] meta-linaro: python-wand: fix BB_NO_NETWORK build
+
+This fixes python-wand tag in BSP2.23 to build with BB_NO_NETWORK=1
+
+Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
+---
+ meta-optee/recipes-devtools/python/python-wand_0.4.3.bb | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/meta-optee/recipes-devtools/python/python-wand_0.4.3.bb b/meta-optee/recipes-devtools/python/python-wand_0.4.3.bb
+index cc91892..41a6b8f 100644
+--- a/meta-optee/recipes-devtools/python/python-wand_0.4.3.bb
++++ b/meta-optee/recipes-devtools/python/python-wand_0.4.3.bb
+@@ -6,7 +6,7 @@ LIC_FILES_CHKSUM = "file://LICENSE;md5=170eafd687d4a2b950819cd5e067e6d5"
+ 
+ SRCNAME = "wand"
+ 
+-SRC_URI = "git://github.com/dahlia/wand.git;tag=${PV}"
++SRC_URI = "git://github.com/dahlia/wand.git;tag=81b2ce5ac117cd69e4894780925fab12ff0383b9"
+ S = "${WORKDIR}/git"
+ 
+ inherit setuptools
+-- 
+1.9.1
+
diff --git a/meta-rcar-gen3-adas/docs/sample/patch/0002-meta-renesas-gstreamer-fix-BB_NO_NETWORK-build.patch b/meta-rcar-gen3-adas/docs/sample/patch/0002-meta-renesas-gstreamer-fix-BB_NO_NETWORK-build.patch
new file mode 100644
index 0000000..3dcb6be
--- /dev/null
+++ b/meta-rcar-gen3-adas/docs/sample/patch/0002-meta-renesas-gstreamer-fix-BB_NO_NETWORK-build.patch
@@ -0,0 +1,92 @@
+From 4babf852ffee2e08e5fd1c1097bd17c235cd78fa Mon Sep 17 00:00:00 2001
+From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
+Date: Sun, 17 Sep 2017 00:36:21 +0300
+Subject: [PATCH] meta-renesas: gstreamer: fix BB_NO_NETWORK build
+
+Use gitsm for submodule intiializeation. This will enable caching
+submodule gits into downloads.
+Later it is needed for build with BB_NO_NETWORK=1
+
+Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
+---
+ .../gstreamer/gstreamer1.0-omx_1.2.0.bbappend             |  2 +-
+ .../gstreamer/gstreamer1.0-plugins-bad_1.6.3.bbappend     | 15 +--------------
+ .../gstreamer/gstreamer1.0-plugins-good_1.6.3.bbappend    | 15 +--------------
+ 3 files changed, 3 insertions(+), 29 deletions(-)
+
+diff --git a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-omx_1.2.0.bbappend b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-omx_1.2.0.bbappend
+index 9a30dd9..4606392 100644
+--- a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-omx_1.2.0.bbappend
++++ b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-omx_1.2.0.bbappend
+@@ -1,5 +1,5 @@
+ SRC_URI_remove = "http://gstreamer.freedesktop.org/src/gst-omx/gst-omx-${PV}.tar.xz"
+-SRC_URI_append = " git://github.com/renesas-rcar/gst-omx.git;branch=RCAR-GEN3/1.2.0"
++SRC_URI_append = " gitsm://github.com/renesas-rcar/gst-omx.git;branch=RCAR-GEN3/1.2.0"
+ 
+ DEPENDS += "omx-user-module mmngrbuf-user-module"
+ 
+diff --git a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_1.6.3.bbappend b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_1.6.3.bbappend
+index 73b5529..b44408c 100644
+--- a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_1.6.3.bbappend
++++ b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_1.6.3.bbappend
+@@ -1,5 +1,5 @@
+ SRC_URI_remove = "http://gstreamer.freedesktop.org/src/gst-plugins-bad/gst-plugins-bad-${PV}.tar.xz"
+-SRC_URI_append = " git://github.com/renesas-rcar/gst-plugins-bad.git;branch=RCAR-GEN3/1.6.3"
++SRC_URI_append = " gitsm://github.com/renesas-rcar/gst-plugins-bad.git;branch=RCAR-GEN3/1.6.3"
+ 
+ SRCREV = "e336b2dacf29a155dc8f6896ee0f3a89d87d805e"
+ 
+@@ -7,19 +7,6 @@ DEPENDS += "weston"
+ 
+ S = "${WORKDIR}/git"
+ 
+-# submodule is extracted before do_populate_lic
+-addtask do_init_submodule after do_unpack before do_patch
+-
+-do_init_submodule() {
+-    export http_proxy=${http_proxy}
+-    export https_proxy=${https_proxy}
+-    export HTTP_PROXY=${HTTP_PROXY}
+-    export HTTPS_PROXY=${HTTPS_PROXY}
+-    cd ${S}
+-    git submodule init
+-    git submodule update
+-}
+-
+ do_configure_prepend() {
+     cd ${S}
+     ./autogen.sh --noconfigure
+diff --git a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-good_1.6.3.bbappend b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-good_1.6.3.bbappend
+index 1d353ec..76a3979 100644
+--- a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-good_1.6.3.bbappend
++++ b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-good_1.6.3.bbappend
+@@ -1,5 +1,5 @@
+ SRC_URI_remove = "http://gstreamer.freedesktop.org/src/gst-plugins-good/gst-plugins-good-${PV}.tar.xz"
+-SRC_URI_append = " git://github.com/renesas-rcar/gst-plugins-good.git;branch=RCAR-GEN3/1.6.3"
++SRC_URI_append = " gitsm://github.com/renesas-rcar/gst-plugins-good.git;branch=RCAR-GEN3/1.6.3"
+ 
+ SRCREV = "00beed48b36e0b7f2c92199806cc4cb9e0990166"
+ 
+@@ -12,19 +12,6 @@ EXTRA_OECONF_append = " \
+     --enable-ignore-fps-of-video-standard \
+ "
+ 
+-# submodule is extracted before do_populate_lic
+-addtask do_init_submodule after do_unpack before do_patch
+-
+-do_init_submodule() {
+-    export http_proxy=${http_proxy}
+-    export https_proxy=${https_proxy}
+-    export HTTP_PROXY=${HTTP_PROXY}
+-    export HTTPS_PROXY=${HTTPS_PROXY}
+-    cd ${S}
+-    git submodule init
+-    git submodule update
+-}
+-
+ do_configure_prepend() {
+     cd ${S}
+     ./autogen.sh --noconfigure
+-- 
+1.9.1
+
diff --git a/meta-rcar-gen3-adas/docs/sample/patch/0003-poky-bitbake-gitsm-fix-BB_NO_NETWORK-build.patch b/meta-rcar-gen3-adas/docs/sample/patch/0003-poky-bitbake-gitsm-fix-BB_NO_NETWORK-build.patch
new file mode 100644
index 0000000..4160351
--- /dev/null
+++ b/meta-rcar-gen3-adas/docs/sample/patch/0003-poky-bitbake-gitsm-fix-BB_NO_NETWORK-build.patch
@@ -0,0 +1,47 @@
+From e0eb46a08a0bdd278800f75c0004e33af2376374 Mon Sep 17 00:00:00 2001
+From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
+Date: Sun, 17 Sep 2017 00:39:12 +0300
+Subject: [PATCH] poky: bitbake: gitsm: fix BB_NO_NETWORK build
+
+This allows to fetch submodules from download cache.
+
+Signed-off-by: Mikko Rapeli <mikko.rapeli@bmw.de>
+Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
+---
+ bitbake/lib/bb/fetch2/gitsm.py | 15 +++++++++++++--
+ 1 file changed, 13 insertions(+), 2 deletions(-)
+
+diff --git a/bitbake/lib/bb/fetch2/gitsm.py b/bitbake/lib/bb/fetch2/gitsm.py
+index 752f1d3..cb417a3 100644
+--- a/bitbake/lib/bb/fetch2/gitsm.py
++++ b/bitbake/lib/bb/fetch2/gitsm.py
+@@ -109,7 +109,7 @@ class GitSM(Git):
+         runfetchcmd("sed " + gitdir + "/config -i -e 's/bare.*=.*true/bare = false/'", d)
+         os.chdir(tmpclonedir)
+         runfetchcmd(ud.basecmd + " reset --hard", d)
+-        runfetchcmd(ud.basecmd + " checkout " + ud.revisions[ud.names[0]], d)
++        runfetchcmd(ud.basecmd + " checkout -f " + ud.revisions[ud.names[0]], d)
+         runfetchcmd(ud.basecmd + " submodule update --init --recursive", d)
+         self._set_relative_paths(tmpclonedir)
+         runfetchcmd("sed " + gitdir + "/config -i -e 's/bare.*=.*false/bare = true/'", d)
+@@ -130,5 +130,16 @@ class GitSM(Git):
+         os.chdir(ud.destdir)
+         submodules = self.uses_submodules(ud, d)
+         if submodules:
++            # Copy also submodule trees from download cache instead of
++            # downloading again from the upstream repository.
++            # For some reason git does not clone them.
++            clone_modules = os.path.join(ud.clonedir, "modules")
++            if os.path.exists(clone_modules):
++                dest_modules = os.path.join(ud.destdir, ".git")
++                runfetchcmd("cp -a " + clone_modules + " " + dest_modules, d)
++
+             runfetchcmd(ud.basecmd + " checkout " + ud.revisions[ud.names[0]], d)
+-            runfetchcmd(ud.basecmd + " submodule update --init --recursive", d)
++            if d.getVar("BB_NO_NETWORK", True) == "1":
++                runfetchcmd(ud.basecmd + " submodule update --no-fetch --init --recursive", d)
++            else:
++                runfetchcmd(ud.basecmd + " submodule update --init --recursive", d)
+-- 
+1.9.1
+