Pack patches: put all ADAS boards patches on one

1 files changed, 0 insertions, 1724 deletions

diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0037-arm64-dts-r8a7796-m3ulcb-kf-add-ADAS-board.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0037-arm64-dts-r8a7796-m3ulcb-kf-add-ADAS-board.patch
deleted file mode 100644
index be77003..0000000
--- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0037-arm64-dts-r8a7796-m3ulcb-kf-add-ADAS-board.patch
+++ /dev/null
@@ -1,1724 +0,0 @@
-From dffbc2287b4fd0c54b49fd4bb41d7f06c23e20b6 Mon Sep 17 00:00:00 2001
-From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
-Date: Wed, 4 Jan 2017 10:37:23 +0300
-Subject: [PATCH] arm64: dts: r8a7796-m3ulcb-kf: add ADAS board
-
-Kingfisher board on R8A7796
-
-Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
----
- arch/arm64/boot/dts/renesas/Makefile               |    1 +
- .../boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts      |  443 +++++++
- arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts  | 1238 ++++++++++++++++++++
- 3 files changed, 1682 insertions(+)
- create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts
- create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts
-
-diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
-index 5d99267..e41b5b3 100644
---- a/arch/arm64/boot/dts/renesas/Makefile
-+++ b/arch/arm64/boot/dts/renesas/Makefile
-@@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-had-alfa.dtb r8a7795-es1-h3ulcb
- dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-kf.dtb r8a7795-es1-h3ulcb-kf-v1.dtb
- dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x-view.dtb
- dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-view.dtb
-+dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb r8a7796-m3ulcb-kf-v1.dtb
- 
- always		:= $(dtb-y)
- clean-files	:= *.dtb
-diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts
-new file mode 100644
-index 0000000..ff0ec0f
---- /dev/null
-+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts
-@@ -0,0 +1,443 @@
-+/*
-+ * Device Tree Source for the M3ULCB Kingfisher V1 board
-+ *
-+ * Copyright (C) 2017 Renesas Electronics Corp.
-+ * Copyright (C) 2017 Cogent Embedded, Inc.
-+ *
-+ * This file is licensed under the terms of the GNU General Public License
-+ * version 2.  This program is licensed "as is" without any warranty of any
-+ * kind, whether express or implied.
-+ */
-+
-+#include "r8a7796-m3ulcb-kf.dts"
-+
-+/ {
-+	model = "Renesas M3ULCB Kingfisher V1 board based on r8a7796";
-+
-+	aliases {
-+		serial1 = &hscif0;
-+		serial2 = &hscif1;
-+		serial3 = &scif1;
-+	};
-+
-+	wlan_en: regulator@4 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "wlan-en-regulator";
-+
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+
-+		gpio = <&gpio_ext_74 4 GPIO_ACTIVE_HIGH>;
-+		enable-active-high;
-+	};
-+
-+	codec_en_reg: regulator@6 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "codec-en-regulator";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+
-+		gpio = <&gpio_ext_74 15 0>;
-+
-+		/* delay - CHECK */
-+		startup-delay-us = <70000>;
-+		enable-active-high;
-+	};
-+
-+	amp_en_reg: regulator@7 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "amp-en-regulator";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+
-+		gpio = <&gpio_ext_74 0 0>;
-+
-+		startup-delay-us = <0>;
-+		enable-active-high;
-+	};
-+
-+	/delete-node/regulator@8;
-+
-+	sdio_switch: regulator@9 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "wifi_on";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		gpio = <&gpio_ext_74 5 0>;
-+		enable-active-low;
-+		regulator-always-on;
-+	};
-+
-+	/delete-node/regulator@10;
-+
-+	radio_switch: regulator@11 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "radio_on";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		gpio = <&gpio_ext_74 13 GPIO_ACTIVE_HIGH>;
-+		enable-active-high;
-+		regulator-always-on;
-+	};
-+
-+	kim {
-+		compatible = "kim";
-+		nshutdown_gpio = <343>;  /* gpio_ext_74 pin 3 */
-+		/* serial1 */
-+		dev_name = "/dev/ttySC1";
-+		flow_cntrl = <1>;
-+		/* int div 8 hscif@26.6666656MHz */
-+		baud_rate = <3333332>;
-+	};
-+
-+	hdmi-out {
-+		compatible = "hdmi-connector";
-+		type = "a";
-+
-+		port {
-+			hdmi_con: endpoint {
-+				remote-endpoint = <&adv7513_out>;
-+			};
-+		};
-+	};
-+};
-+
-+&pfc {
-+	/delete-node/hscif4;
-+
-+	scif1_pins: scif1 {
-+		groups = "scif1_data_b";
-+		function = "scif1";
-+	};
-+
-+	hscif0_pins: hscif0 {
-+		groups = "hscif0_data", "hscif0_ctrl";
-+		function = "hscif0";
-+	};
-+
-+	hscif1_pins: hscif1 {
-+		groups = "hscif1_data_a", "hscif1_ctrl_a";
-+		function = "hscif1";
-+	};
-+
-+	du_pins: du {
-+		groups = "du_rgb888", "du_sync", "du_clk_out_0", "du_disp";
-+		function = "du";
-+	};
-+};
-+
-+&du {
-+	pinctrl-0 = <&du_pins>;
-+	pinctrl-names = "default";
-+
-+	ports {
-+		port@0 {
-+			endpoint {
-+				remote-endpoint = <&adv7513_in>;
-+			};
-+		};
-+		port@1 {
-+			endpoint {
-+				remote-endpoint = <&rcar_dw_hdmi0_in>;
-+			};
-+		};
-+	};
-+};
-+
-+&gpio0 {
-+	/delete-node/video_a_irq;
-+	/delete-node/video_b_irq;
-+	/delete-node/gpioext_2_20_irq;
-+};
-+
-+&gpio1 {
-+	/delete-node/gpioext_2_21_irq;
-+	/delete-node/wifi_irq;
-+};
-+
-+&gpio2 {
-+	bl_pwm {
-+		gpio-hog;
-+		gpios = <3 GPIO_ACTIVE_HIGH>;
-+		output-high;
-+		line-name = "BL PWM 100%";
-+	};
-+};
-+
-+&gpio5 {
-+	/delete-node/touch_irq;
-+	/delete-node/bt_strap;
-+
-+	/* V1 has h/w bug with swapped RTS and CTS on BT interface */
-+	/* Ignore these pins */
-+	hscif0_cts {
-+		gpio-hog;
-+		gpios = <15 GPIO_ACTIVE_HIGH>;
-+		input;
-+		line-name = "hscif0 CTS";
-+	};
-+
-+	hscif0_rts {
-+		gpio-hog;
-+		gpios = <16 GPIO_ACTIVE_HIGH>;
-+		input;
-+		line-name = "hscif0 RTS";
-+	};
-+};
-+
-+&gpio7 {
-+	/delete-node/gpioext_2_21_irq;
-+};
-+
-+&scif1 {
-+	pinctrl-0 = <&scif1_pins>;
-+	pinctrl-names = "default";
-+
-+	status = "okay";
-+};
-+
-+&hscif0 {
-+	pinctrl-0 = <&hscif0_pins>;
-+	pinctrl-names = "default";
-+	ctsrts;
-+
-+	status = "okay";
-+};
-+
-+&hscif1 {
-+	pinctrl-0 = <&hscif1_pins>;
-+	pinctrl-names = "default";
-+
-+	status = "okay";
-+};
-+
-+&hscif4 {
-+	/delete-property/pinctrl-0;
-+	/delete-property/pinctrl-names;
-+
-+	status = "disabled";
-+};
-+
-+&i2c2 {
-+	/delete-node/pca9535@20;
-+	/delete-node/pca9535@21;
-+
-+	gpio_ext_74: pca9539@74 {
-+		compatible = "nxp,pca9539";
-+		reg = <0x74>;
-+		gpio-controller;
-+		#gpio-cells = <2>;
-+		interrupt-controller;
-+		interrupt-parent = <&gpio6>;
-+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-+
-+		hub_pwen {
-+			gpio-hog;
-+			gpios = <6 GPIO_ACTIVE_HIGH>;
-+			output-high;
-+			line-name = "HUB pwen";
-+		};
-+		hub_rst {
-+			gpio-hog;
-+			gpios = <7 GPIO_ACTIVE_HIGH>;
-+			output-high;
-+			line-name = "HUB rst";
-+		};
-+		otg_offvbus {
-+			gpio-hog;
-+			gpios = <8 GPIO_ACTIVE_HIGH>;
-+			output-low;
-+			line-name = "OTG off VBUSn";
-+		};
-+		otg_extlpn {
-+			gpio-hog;
-+			gpios = <9 GPIO_ACTIVE_HIGH>;
-+			output-high;
-+			line-name = "OTG EXTLPn";
-+		};
-+		otg_stat1 {
-+			gpio-hog;
-+			gpios = <10 GPIO_ACTIVE_HIGH>;
-+			input;
-+			line-name = "OTG Stat1";
-+		};
-+		otg_stat2 {
-+			gpio-hog;
-+			gpios = <11 GPIO_ACTIVE_HIGH>;
-+			input;
-+			line-name = "OTG Stat2";
-+		};
-+	};
-+
-+	gpio_ext_75: pca9539@75 {
-+		compatible = "nxp,pca9539";
-+		reg = <0x75>;
-+		gpio-controller;
-+		#gpio-cells = <2>;
-+		interrupt-controller;
-+		interrupt-parent = <&gpio6>;
-+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
-+
-+		gps_rst {
-+			gpio-hog;
-+			gpios = <6 GPIO_ACTIVE_HIGH>;
-+			output-high;
-+			line-name = "GPS rst";
-+		};
-+		fpdl_shdn {
-+			gpio-hog;
-+			gpios = <9 GPIO_ACTIVE_HIGH>;
-+			output-high;
-+			line-name = "FPDLink shdn";
-+		};
-+	};
-+};
-+
-+&i2cswitch2 {
-+	reg = <0x71>;
-+	reset-gpios= <&gpio5 3 GPIO_ACTIVE_LOW>;
-+
-+	i2c@4 {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		reg = <4>;
-+
-+		hdmi@3d {
-+			compatible = "adi,adv7511w";
-+			reg = <0x3d>;
-+			interrupt-parent = <&gpio2>;
-+			interrupts = <0 IRQ_TYPE_EDGE_BOTH>;
-+			pd-gpios = <&gpio_ext_75 5 GPIO_ACTIVE_LOW>;
-+
-+			adi,input-depth = <8>;
-+			adi,input-colorspace = "rgb";
-+			adi,input-clock = "1x";
-+			adi,input-style = <1>;
-+			adi,input-justification = "evenly";
-+			adi,clock-delay = <1200>;
-+
-+			ports {
-+				#address-cells = <1>;
-+				#size-cells = <0>;
-+
-+				port@0 {
-+					reg = <0>;
-+					adv7513_in: endpoint {
-+						remote-endpoint = <&du_out_rgb>;
-+					};
-+				};
-+
-+				port@1 {
-+					reg = <1>;
-+					adv7513_out: endpoint {
-+						remote-endpoint = <&hdmi_con>;
-+					};
-+				};
-+			};
-+		};
-+	};
-+};
-+
-+&i2c4 {
-+	/delete-node/pca9535@21;
-+
-+	gpio_ext_76: pca9539@76 {
-+		compatible = "nxp,pca9539";
-+		reg = <0x76>;
-+		gpio-controller;
-+		#gpio-cells = <2>;
-+		interrupt-controller;
-+		interrupt-parent = <&gpio7>;
-+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-+
-+		port_b_a0 {
-+			gpio-hog;
-+			gpios = <0 GPIO_ACTIVE_HIGH>;
-+			output-low;
-+			line-name = "Video-B A0";
-+		};
-+		port_b_a1 {
-+			gpio-hog;
-+			gpios = <1 GPIO_ACTIVE_HIGH>;
-+			output-high;
-+			line-name = "Video-B A1";
-+		};
-+		port_a_a0 {
-+			gpio-hog;
-+			gpios = <2 GPIO_ACTIVE_HIGH>;
-+			output-low;
-+			line-name = "Video-A A0";
-+		};
-+		port_a_a1 {
-+			gpio-hog;
-+			gpios = <3 GPIO_ACTIVE_HIGH>;
-+			output-high;
-+			line-name = "Video-A A1";
-+		};
-+		/* pin 12 - CAM_CLK */
-+		rpi_cam_io_1 {
-+			gpio-hog;
-+			gpios = <10 GPIO_ACTIVE_HIGH>;
-+			output-high;
-+			line-name = "RaspB_IO1";
-+		};
-+		/* pin 11 - CAM_GPIO - assume pwdn */
-+		rpi_cam_io_0 {
-+			gpio-hog;
-+			gpios = <11 GPIO_ACTIVE_HIGH>;
-+			output-high;
-+			line-name = "RaspB_IO0";
-+		};
-+		/* 0 - FPDLink output, 1 - LVDS output */
-+		lvds_vs_fpdl {
-+			gpio-hog;
-+			gpios = <14 GPIO_ACTIVE_HIGH>;
-+			output-high;
-+			line-name = "LVDS switch";
-+		};
-+	};
-+
-+	gpio_ext_77: pca9539@77 {
-+		compatible = "nxp,pca9539";
-+		reg = <0x77>;
-+		gpio-controller;
-+		#gpio-cells = <2>;
-+		interrupt-controller;
-+		interrupt-parent = <&gpio5>;
-+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-+
-+		mpcie_wake {
-+			gpio-hog;
-+			gpios = <0 GPIO_ACTIVE_HIGH>;
-+			output-low;
-+			line-name = "mPCIe WAKE#";
-+		};
-+		mpcie_wdisable {
-+			gpio-hog;
-+			gpios = <1 GPIO_ACTIVE_HIGH>;
-+			output-high;
-+			line-name = "mPCIe W_DISABLE";
-+		};
-+		mpcie_clreq {
-+			gpio-hog;
-+			gpios = <2 GPIO_ACTIVE_HIGH>;
-+			input;
-+			line-name = "mPCIe CLKREQ#";
-+		};
-+		mpcie_ovc {
-+			gpio-hog;
-+			gpios = <3 GPIO_ACTIVE_HIGH>;
-+			input;
-+			line-name = "mPCIe OVC";
-+		};
-+	};
-+};
-+
-+&i2cswitch4 {
-+	reg = <0x71>;
-+	reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>;
-+};
-+
-+&wlcore {
-+	interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
-+};
-diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts
-new file mode 100644
-index 0000000..39eab1f
---- /dev/null
-+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts
-@@ -0,0 +1,1238 @@
-+/*
-+ * Device Tree Source for the M3ULCB Kingfisher board on r8a7796
-+ *
-+ * Copyright (C) 2017 Renesas Electronics Corp.
-+ * Copyright (C) 2017 Cogent Embedded, Inc.
-+ *
-+ * This file is licensed under the terms of the GNU General Public License
-+ * version 2.  This program is licensed "as is" without any warranty of any
-+ * kind, whether express or implied.
-+ */
-+
-+#include "r8a7796-m3ulcb.dts"
-+
-+/ {
-+	model = "Renesas M3ULCB Kingfisher board based on r8a7796";
-+
-+	aliases {
-+		serial1 = &hscif4;
-+	};
-+
-+	snd_clk: snd_clk {
-+		compatible = "fixed-clock";
-+		#clock-cells = <0>;
-+		clock-frequency = <24576000>;
-+		clock-output-names = "scki";
-+	};
-+
-+	wlan_en: regulator@4 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "wlan-en-regulator";
-+
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+
-+		gpio = <&gpio_ext_20 4 GPIO_ACTIVE_HIGH>;
-+		enable-active-high;
-+	};
-+
-+	vcc_sdhi3: regulator@41 {
-+		compatible = "regulator-fixed";
-+
-+		regulator-name = "SDHI3 Vcc";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		regulator-always-on;
-+	};
-+
-+	vccq_sdhi3: regulator@5 {
-+		compatible = "regulator-fixed";
-+
-+		regulator-name = "SDHI3 VccQ";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+	};
-+
-+	codec_en_reg: regulator@6 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "codec-en-regulator";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+
-+		gpio = <&gpio_ext_20 15 0>;
-+
-+		/* delay - CHECK */
-+		startup-delay-us = <70000>;
-+		enable-active-high;
-+	};
-+
-+	amp_en_reg: regulator@7 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "amp-en-regulator";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+
-+		gpio = <&gpio_ext_20 0 0>;
-+
-+		startup-delay-us = <0>;
-+		enable-active-high;
-+	};
-+
-+	lvds_switch: regulator@8 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "lvds_on";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		gpio = <&gpio1 24 0>;
-+		enable-active-high;
-+		regulator-always-on;
-+	};
-+
-+	sdio_switch: regulator@9 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "wifi_on";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		gpio = <&gpio_ext_20 5 0>;
-+		enable-active-low;
-+		regulator-always-on;
-+	};
-+
-+	sound_switch: regulator@10 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "pcm3168a_on";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		gpio = <&gpio_ext_21 5 0>;
-+		enable-active-low;
-+		regulator-always-on;
-+	};
-+
-+	radio_switch: regulator@11 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "radio_on";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		gpio = <&gpio_ext_20 13 GPIO_ACTIVE_HIGH>;
-+		enable-active-high;
-+		regulator-always-on;
-+	};
-+
-+	kim {
-+		compatible = "kim";
-+		nshutdown_gpio = <343>;  /* pca9535@i2c2.0x20 pin 3 */
-+		/* serial1 */
-+		dev_name = "/dev/ttySC1";
-+		flow_cntrl = <1>;
-+		/* int div 8 hscif@26.6666656MHz */
-+		baud_rate = <3333332>;
-+	};
-+
-+	btwilink {
-+		compatible = "btwilink";
-+	};
-+
-+	sound_ext: sound@0 {
-+		pinctrl-0 = <&sound_0_pins>;
-+		pinctrl-names = "default";
-+		compatible = "simple-audio-card";
-+
-+		simple-audio-card,format = "left_j";
-+		simple-audio-card,name = "pcm3168a";
-+
-+		simple-audio-card,bitclock-master = <&sound_ext_master>;
-+		simple-audio-card,frame-master = <&sound_ext_master>;
-+		sound_ext_master: simple-audio-card,cpu@0 {
-+			sound-dai = <&rcar_sound 0>;
-+			dai-tdm-slot-num = <8>;
-+			dai-tdm-slot-width = <32>;
-+		};
-+
-+		simple-audio-card,codec@0 {
-+			sound-dai = <&pcm3168a>;
-+			dai-tdm-slot-num = <8>;
-+			dai-tdm-slot-width = <32>;
-+			system-clock-frequency = <24576000>;
-+		};
-+	};
-+
-+	/delete-node/sound;
-+
-+	rsnd_ak4613: sound@1 {
-+		pinctrl-0 = <&sound_1_pins>;
-+		pinctrl-names = "default";
-+		compatible = "simple-audio-card";
-+
-+		simple-audio-card,format = "left_j";
-+		simple-audio-card,name = "ak4613";
-+
-+		simple-audio-card,bitclock-master = <&sndcpu>;
-+		simple-audio-card,frame-master = <&sndcpu>;
-+
-+		sndcpu: simple-audio-card,cpu@1 {
-+			sound-dai = <&rcar_sound 1>;
-+		};
-+
-+		sndcodec: simple-audio-card,codec@1 {
-+			sound-dai = <&ak4613>;
-+		};
-+	};
-+
-+	sound_radio: sound@2 {
-+		pinctrl-0 = <&sound_2_pins>;
-+		pinctrl-names = "default";
-+		compatible = "simple-audio-card";
-+
-+		simple-audio-card,format = "i2s";
-+		simple-audio-card,name = "radio";
-+
-+		simple-audio-card,bitclock-master = <&sound_radio_master>;
-+		simple-audio-card,frame-master = <&sound_radio_master>;
-+		simple-audio-card,cpu@2 {
-+			sound-dai = <&rcar_sound 2>;
-+		};
-+
-+		sound_radio_master: simple-audio-card,codec@2 {
-+			sound-dai = <&radio>;
-+			system-clock-frequency = <12288000>;
-+		};
-+	};
-+
-+	lvds-encoder {
-+		compatible = "thine,thc63lvdm83d";
-+
-+		ports {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			port@0 {
-+				reg = <0>;
-+				lvds_enc_in: endpoint {
-+					remote-endpoint = <&du_out_lvds0>;
-+				};
-+			};
-+			port@1 {
-+				reg = <1>;
-+				lvds_enc_out: endpoint {
-+					remote-endpoint = <&lvds_in>;
-+				};
-+			};
-+		};
-+	};
-+
-+	lvds {
-+		compatible = "lvds-connector";
-+
-+		width-mm = <210>;
-+		height-mm = <158>;
-+
-+		panel-timing {
-+			/* 1280x800 @60Hz */
-+			clock-frequency = <65000000>;
-+			hactive = <1280>;
-+			vactive = <800>;
-+			hsync-len = <40>;
-+			hfront-porch = <80>;
-+			hback-porch = <40>;
-+			vfront-porch = <14>;
-+			vback-porch = <14>;
-+			vsync-len = <4>;
-+		};
-+
-+		port {
-+			lvds_in: endpoint {
-+				remote-endpoint = <&lvds_enc_out>;
-+			};
-+		};
-+	};
-+
-+	radio: si468x@0 {
-+		compatible = "si,si468x-pcm";
-+		status = "okay";
-+
-+		#sound-dai-cells = <0>;
-+	};
-+};
-+
-+&pfc {
-+	hscif4_pins: hscif4 {
-+		groups = "hscif4_data_a", "hscif4_ctrl";
-+		function = "hscif4";
-+	};
-+
-+	sdhi3_pins_3v3: sd3_3v3 {
-+		groups = "sdhi3_data4", "sdhi3_ctrl";
-+		function = "sdhi3";
-+		power-source = <3300>;
-+	};
-+
-+	sound_0_pins: sound0 {
-+		groups = "ssi78_ctrl", "ssi7_data", "ssi8_data";
-+		function = "ssi";
-+	};
-+
-+	sound_1_pins: sound1 {
-+		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
-+		function = "ssi";
-+	};
-+
-+	sound_2_pins: sound2 {
-+		groups = "ssi6_ctrl", "ssi6_data";
-+		function = "ssi";
-+	};
-+
-+	usb0_pins: usb0 {
-+		groups = "usb0";
-+		function = "usb0";
-+	};
-+
-+	can0_pins: can0 {
-+		groups = "can0_data_a";
-+		function = "can0";
-+	};
-+
-+	can1_pins: can1 {
-+		groups = "can1_data";
-+		function = "can1";
-+	};
-+
-+	canfd0_pins: canfd0 {
-+		groups = "canfd0_data_a";
-+		function = "canfd0";
-+	};
-+
-+	canfd1_pins: canfd1 {
-+		groups = "canfd1_data";
-+		function = "canfd1";
-+	};
-+};
-+
-+&gpio0 {
-+	video_a_irq {
-+		gpio-hog;
-+		gpios = <13 GPIO_ACTIVE_HIGH>;
-+		input;
-+		line-name = "Video-A irq";
-+	};
-+
-+	video_b_irq {
-+		gpio-hog;
-+		gpios = <14 GPIO_ACTIVE_HIGH>;
-+		input;
-+		line-name = "Video-B irq";
-+	};
-+
-+	gpioext_2_20_irq {
-+		gpio-hog;
-+		gpios = <15 GPIO_ACTIVE_HIGH>;
-+		input;
-+		line-name = "0x20@i2c2 irq";
-+	};
-+};
-+
-+&gpio1 {
-+	gpioext_2_21_irq {
-+		gpio-hog;
-+		gpios = <15 GPIO_ACTIVE_HIGH>;
-+		input;
-+		line-name = "0x21@i2c2 irq";
-+	};
-+
-+	wifi_irq {
-+		gpio-hog;
-+		gpios = <25 GPIO_ACTIVE_HIGH>;
-+		input;
-+		line-name = "wifi irq";
-+	};
-+};
-+
-+&gpio5 {
-+	touch_irq {
-+		gpio-hog;
-+		gpios = <6 GPIO_ACTIVE_HIGH>;
-+		input;
-+		line-name = "touch irq";
-+	};
-+
-+	/* From TI forum */
-+	/* BT_AUD_OUT should be pulled low when WL_EN is activated. */
-+	/* in case it isn't, wilink8 ends up in one of the test modes that introduces various issues */
-+	bt_strap {
-+		gpio-hog;
-+		gpios = <14 GPIO_ACTIVE_HIGH>;
-+		output-low;
-+		line-name = "BT strap pin";
-+	};
-+};
-+
-+&gpio7 {
-+	gpioext_2_21_irq {
-+		gpio-hog;
-+		gpios = <3 GPIO_ACTIVE_HIGH>;
-+		input;
-+		line-name = "0x21@i2c4 irq";
-+	};
-+};
-+
-+&hscif4 {
-+	pinctrl-0 = <&hscif4_pins>;
-+	pinctrl-names = "default";
-+	ctsrts;
-+
-+	status = "okay";
-+};
-+
-+&i2c2 {
-+	clock-frequency = <400000>;
-+
-+	gpio_ext_20: pca9535@20 {
-+		compatible = "nxp,pca9535";
-+		reg = <0x20>;
-+		gpio-controller;
-+		#gpio-cells = <2>;
-+		interrupt-controller;
-+		interrupt-parent = <&gpio0>;
-+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
-+	};
-+
-+	gpio_ext_21: pca9535@21 {
-+		compatible = "nxp,pca9535";
-+		reg = <0x21>;
-+		gpio-controller;
-+		#gpio-cells = <2>;
-+		interrupt-controller;
-+		interrupt-parent = <&gpio1>;
-+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
-+	};
-+
-+	i2cswitch2: pca9548@74 {
-+		compatible = "nxp,pca9548";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		reg = <0x74>;
-+		reset-gpios = <&gpio6 5 GPIO_ACTIVE_LOW>;
-+
-+		i2c@0 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <0>;
-+			/* BCM node(s) */
-+		};
-+
-+		i2c@1 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <1>;
-+			/* USB3.0 HUB node(s) */
-+		};
-+
-+		i2c@2 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <2>;
-+			/* Power amp node(s) */
-+		};
-+
-+		i2c@3 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <3>;
-+			/* Radio node(s) */
-+		};
-+
-+		i2c@4 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <4>;
-+			/* A2B node(s) */
-+		};
-+
-+		i2c@5 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <5>;
-+			/* PCIe node(s) */
-+		};
-+
-+		i2c@6 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <6>;
-+			/* LVDS display node(s) */
-+
-+			polytouch: edt-ft5x06@38 {
-+				compatible = "edt,edt-ft5x06";
-+				reg = <0x38>;
-+				interrupt-parent = <&gpio5>;
-+				interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
-+			};
-+		};
-+
-+		i2c@7 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <7>;
-+			/* Audio, GPS and Gyro node(s) */
-+
-+			pcm3168a: audio-codec@44 {
-+				#sound-dai-cells = <0>;
-+				compatible = "ti,pcm3168a";
-+				reg = <0x44>;
-+				clocks = <&snd_clk>;
-+				clock-names = "scki";
-+				tdm;
-+				VDD1-supply = <&codec_en_reg>;
-+				VDD2-supply = <&codec_en_reg>;
-+				VCCAD1-supply = <&codec_en_reg>;
-+				VCCAD2-supply = <&codec_en_reg>;
-+				VCCDA1-supply = <&amp_en_reg>;
-+				VCCDA2-supply = <&amp_en_reg>;
-+			};
-+
-+			lsm9ds0_acc_mag@1d {
-+				compatible = "st,lsm9ds0_acc_mag";
-+				reg = <0x1d>;
-+			};
-+
-+			lsm9ds0_gyr@6b {
-+				compatible = "st,lsm9ds0-gyro";
-+				reg = <0x6b>;
-+			};
-+
-+			/* GPS@ 0x42 */
-+		};
-+	};
-+};
-+
-+&i2c4 {
-+	gpio_ext_22: pca9535@21 {
-+		compatible = "nxp,pca9535";
-+		reg = <0x22>;
-+		gpio-controller;
-+		#gpio-cells = <2>;
-+		interrupt-controller;
-+		interrupt-parent = <&gpio7>;
-+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-+
-+		/* pin 12 - CAM_CLK */
-+		rpi_cam_io_1 {
-+			gpio-hog;
-+			gpios = <10 GPIO_ACTIVE_HIGH>;
-+			output-high;
-+			line-name = "RaspB_IO1";
-+		};
-+		/* pin 11 - CAM_GPIO - assume pwdn */
-+		rpi_cam_io_0 {
-+			gpio-hog;
-+			gpios = <11 GPIO_ACTIVE_HIGH>;
-+			output-high;
-+			line-name = "RaspB_IO0";
-+		};
-+	};
-+
-+	i2cswitch4: pca9548@74 {
-+		compatible = "nxp,pca9548";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		reg = <0x74>;
-+		reset-gpios= <&gpio6 21 GPIO_ACTIVE_LOW>;
-+
-+		i2c@0 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <0>;
-+			/* SAM node(s) */
-+		};
-+
-+		i2c@1 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <1>;
-+			/* Slot A (CN10) */
-+
-+			ov106xx@0 {
-+				compatible = "ovti,ov106xx";
-+				reg = <0x60>;
-+
-+				port@0 {
-+					ov106xx_in0: endpoint {
-+						clock-lanes = <0>;
-+						data-lanes = <1 2 3 4>;
-+						remote-endpoint = <&vin0ep0>;
-+					};
-+				};
-+				port@1 {
-+					ov106xx_max9286_des0ep0: endpoint@0 {
-+						remote-endpoint = <&max9286_des0ep0>;
-+					};
-+					ov106xx_ti964_des0ep0: endpoint@1 {
-+						remote-endpoint = <&ti964_des0ep0>;
-+					};
-+					ov106xx_ti954_des0ep0: endpoint@2 {
-+						remote-endpoint = <&ti954_des0ep0>;
-+					};
-+				};
-+			};
-+
-+			ov106xx@1 {
-+				compatible = "ovti,ov106xx";
-+				reg = <0x61>;
-+
-+				port@0 {
-+					ov106xx_in1: endpoint {
-+						clock-lanes = <0>;
-+						data-lanes = <1 2 3 4>;
-+						remote-endpoint = <&vin1ep0>;
-+					};
-+				};
-+				port@1 {
-+					ov106xx_max9286_des0ep1: endpoint@0 {
-+						remote-endpoint = <&max9286_des0ep1>;
-+					};
-+					ov106xx_ti964_des0ep1: endpoint@1 {
-+						remote-endpoint = <&ti964_des0ep1>;
-+					};
-+					ov106xx_ti954_des0ep1: endpoint@2 {
-+						remote-endpoint = <&ti954_des0ep1>;
-+					};
-+				};
-+			};
-+
-+			ov106xx@2 {
-+				compatible = "ovti,ov106xx";
-+				reg = <0x62>;
-+
-+				port@0 {
-+					ov106xx_in2: endpoint {
-+						clock-lanes = <0>;
-+						data-lanes = <1 2 3 4>;
-+						remote-endpoint = <&vin2ep0>;
-+					};
-+				};
-+				port@1 {
-+					ov106xx_max9286_des0ep2: endpoint@0 {
-+						remote-endpoint = <&max9286_des0ep2>;
-+					};
-+					ov106xx_ti964_des0ep2: endpoint@1 {
-+						remote-endpoint = <&ti964_des0ep2>;
-+					};
-+				};
-+			};
-+
-+			ov106xx@3 {
-+				compatible = "ovti,ov106xx";
-+				reg = <0x63>;
-+
-+				port@0 {
-+					ov106xx_in3: endpoint {
-+						clock-lanes = <0>;
-+						data-lanes = <1 2 3 4>;
-+						remote-endpoint = <&vin3ep0>;
-+					};
-+				};
-+				port@1 {
-+					ov106xx_max9286_des0ep3: endpoint@0 {
-+						remote-endpoint = <&max9286_des0ep3>;
-+					};
-+					ov106xx_ti964_des0ep3: endpoint@1 {
-+						remote-endpoint = <&ti964_des0ep3>;
-+					};
-+				};
-+			};
-+
-+			/* DS90UB964 @ 0x3a */
-+			ti964-ti9x3@0 {
-+				compatible = "ti,ti964-ti9x3";
-+				reg = <0x3a>;
-+				gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>;
-+				ti,sensor_delay = <350>;
-+				ti,links = <4>;
-+				ti,lanes = <4>;
-+				ti,forwarding-mode = "round-robin";
-+				ti,cable-mode = "coax";
-+
-+				port@0 {
-+					ti964_des0ep0: endpoint@0 {
-+						ti9x3-addr = <0x0c>;
-+						dvp-order = <0>;
-+						remote-endpoint = <&ov106xx_in0>;
-+					};
-+					ti964_des0ep1: endpoint@1 {
-+						ti9x3-addr = <0x0d>;
-+						dvp-order = <0>;
-+						remote-endpoint = <&ov106xx_in1>;
-+					};
-+					ti964_des0ep2: endpoint@2 {
-+						ti9x3-addr = <0x0e>;
-+						dvp-order = <0>;
-+						remote-endpoint = <&ov106xx_in2>;
-+					};
-+					ti964_des0ep3: endpoint@3 {
-+						ti9x3-addr = <0x0f>;
-+						dvp-order = <0>;
-+						remote-endpoint = <&ov106xx_in3>;
-+					};
-+				};
-+				port@1 {
-+					ti964_csi0ep0: endpoint {
-+						csi-rate = <1450>;
-+						remote-endpoint = <&csi2_40_ep>;
-+					};
-+				};
-+			};
-+
-+			/* DS90UB954 @ 0x38 */
-+			ti954-ti9x3@0 {
-+				compatible = "ti,ti954-ti9x3";
-+				reg = <0x38>;
-+				gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>;
-+				ti,sensor_delay = <350>;
-+				ti,links = <2>;
-+				ti,lanes = <4>;
-+				ti,forwarding-mode = "round-robin";
-+				ti,cable-mode = "coax";
-+
-+				port@0 {
-+					ti954_des0ep0: endpoint@0 {
-+						ti9x3-addr = <0x0c>;
-+						dvp-order = <0>;
-+						remote-endpoint = <&ov106xx_in0>;
-+					};
-+					ti954_des0ep1: endpoint@1 {
-+						ti9x3-addr = <0x0d>;
-+						dvp-order = <0>;
-+						remote-endpoint = <&ov106xx_in1>;
-+					};
-+				};
-+				port@1 {
-+					ti954_csi0ep0: endpoint {
-+						csi-rate = <1450>;
-+						remote-endpoint = <&csi2_40_ep>;
-+					};
-+				};
-+			};
-+
-+			/* MAX9286 @ 0x2a */
-+			max9286-max9271@0 {
-+				compatible = "maxim,max9286-max9271";
-+				reg = <0x2a>;
-+				maxim,sensor_delay = <350>;
-+				maxim,links = <4>;
-+				maxim,lanes = <4>;
-+				maxim,resetb-gpio = <1>;
-+				maxim,fsync-mode = "automatic";
-+				maxim,timeout = <100>;
-+
-+				port@0 {
-+					max9286_des0ep0: endpoint@0 {
-+						max9271-addr = <0x50>;
-+						dvp-order = <1>;
-+						remote-endpoint = <&ov106xx_in0>;
-+					};
-+					max9286_des0ep1: endpoint@1 {
-+						max9271-addr = <0x51>;
-+						dvp-order = <1>;
-+						remote-endpoint = <&ov106xx_in1>;
-+					};
-+					max9286_des0ep2: endpoint@2 {
-+						max9271-addr = <0x52>;
-+						dvp-order = <1>;
-+						remote-endpoint = <&ov106xx_in2>;
-+					};
-+					max9286_des0ep3: endpoint@3 {
-+						max9271-addr = <0x53>;
-+						dvp-order = <1>;
-+						remote-endpoint = <&ov106xx_in3>;
-+					};
-+				};
-+				port@1 {
-+					max9286_csi0ep0: endpoint {
-+						csi-rate = <700>;
-+						remote-endpoint = <&csi2_40_ep>;
-+					};
-+				};
-+			};
-+		};
-+
-+		i2c@3 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <3>;
-+			/* MOST node(s) */
-+		};
-+
-+		i2c@4 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <4>;
-+
-+			rpi_camera: ov5647@36 {
-+				compatible = "ovti,ov5647";
-+				reg = <0x36>;
-+
-+				port@0 {
-+					rpi_camera_in: endpoint {
-+						clock-lanes = <0>;
-+						data-lanes = <1 2>;
-+						remote-endpoint = <&vin4ep0>;
-+					};
-+				};
-+			};
-+		};
-+
-+		i2c@5 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <5>;
-+			/* CMOS camera node(s) */
-+		};
-+
-+		i2c@7 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <7>;
-+			/* Slot A (CN10) */
-+
-+			video_a_ext0: pca9535@26 {
-+				compatible = "nxp,pca9535";
-+				reg = <0x26>;
-+				gpio-controller;
-+				#gpio-cells = <2>;
-+
-+				video_a_des_cfg1 {
-+					gpio-hog;
-+					gpios = <5 GPIO_ACTIVE_HIGH>;
-+					output-high;
-+					line-name = "Video-A cfg1";
-+				};
-+				video_a_des_cfg0 {
-+					gpio-hog;
-+					gpios = <6 GPIO_ACTIVE_HIGH>;
-+					output-high;
-+					line-name = "Video-A cfg0";
-+				};
-+				video_a_pwr_shdn {
-+					gpio-hog;
-+					gpios = <3 GPIO_ACTIVE_HIGH>;
-+					output-high;
-+					line-name = "Video-A PWR_SHDN";
-+				};
-+				video_a_cam_pwr0 {
-+					gpio-hog;
-+					gpios = <12 GPIO_ACTIVE_HIGH>;
-+					output-high;
-+					line-name = "Video-A PWR0";
-+				};
-+				video_a_cam_pwr1 {
-+					gpio-hog;
-+					gpios = <13 GPIO_ACTIVE_HIGH>;
-+					output-high;
-+					line-name = "Video-A PWR1";
-+				};
-+				video_a_cam_pwr2 {
-+					gpio-hog;
-+					gpios = <14 GPIO_ACTIVE_HIGH>;
-+					output-high;
-+					line-name = "Video-A PWR2";
-+				};
-+				video_a_cam_pwr3 {
-+					gpio-hog;
-+					gpios = <15 GPIO_ACTIVE_HIGH>;
-+					output-high;
-+					line-name = "Video-A PWR3";
-+				};
-+				video_a_des_shdn {
-+					gpio-hog;
-+					gpios = <4 GPIO_ACTIVE_HIGH>;
-+					output-high;
-+					line-name = "Video-A DES_SHDN";
-+				};
-+				video_a_des_led {
-+					gpio-hog;
-+					gpios = <7 GPIO_ACTIVE_HIGH>;
-+					output-low;
-+					line-name = "Video-A led";
-+				};
-+			};
-+
-+			video_a_ext1: max7325@5c {
-+				compatible = "maxim,max7325";
-+				reg = <0x5c>;
-+				gpio-controller;
-+				#gpio-cells = <2>;
-+
-+				video_a_des_cfg2 {
-+					gpio-hog;
-+					gpios = <4 GPIO_ACTIVE_HIGH>;
-+					output-low;
-+					line-name = "Video-A cfg2";
-+				};
-+				video_a_des_cfg1 {
-+					gpio-hog;
-+					gpios = <6 GPIO_ACTIVE_HIGH>;
-+					output-low;
-+					line-name = "Video-A cfg1";
-+				};
-+				video_a_des_cfg0 {
-+					gpio-hog;
-+					gpios = <7 GPIO_ACTIVE_HIGH>;
-+					output-low;
-+					line-name = "Video-A cfg0";
-+				};
-+				video_a_pwr_shdn {
-+					gpio-hog;
-+					gpios = <14 GPIO_ACTIVE_HIGH>;
-+					output-high;
-+					line-name = "Video-A PWR_SHDN";
-+				};
-+				video_a_cam_pwr0 {
-+					gpio-hog;
-+					gpios = <8 GPIO_ACTIVE_HIGH>;
-+					output-high;
-+					line-name = "Video-A PWR0";
-+				};
-+				video_a_cam_pwr1 {
-+					gpio-hog;
-+					gpios = <9 GPIO_ACTIVE_HIGH>;
-+					output-high;
-+					line-name = "Video-A PWR1";
-+				};
-+				video_a_cam_pwr3 {
-+					gpio-hog;
-+					gpios = <11 GPIO_ACTIVE_HIGH>;
-+					output-high;
-+					line-name = "Video-A PWR3";
-+				};
-+			};
-+		};
-+	};
-+};
-+
-+&pcie_bus_clk {
-+	clock-frequency = <100000000>;
-+	status = "okay";
-+};
-+
-+&pciec0 {
-+	status = "okay";
-+};
-+
-+&pciec1 {
-+	status = "okay";
-+};
-+
-+&vin0 {
-+	status = "okay";
-+
-+	ports {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		port@0 {
-+			vin0ep0: endpoint {
-+				csi,select = "csi40";
-+				virtual,channel = <0>;
-+				data-lanes = <1 2 3 4>;
-+				remote-endpoint = <&ov106xx_in0>;
-+			};
-+		};
-+		port@1 {
-+			csi0ep0: endpoint {
-+				remote-endpoint = <&csi2_40_ep>;
-+			};
-+		};
-+		port@2 {
-+			vin0_max9286_des0ep0: endpoint@0 {
-+				remote-endpoint = <&max9286_des0ep0>;
-+			};
-+			vin0_ti964_des0ep0: endpoint@1 {
-+				remote-endpoint = <&ti964_des0ep0>;
-+			};
-+			vin0_ti954_des0ep0: endpoint@2 {
-+				remote-endpoint = <&ti954_des0ep0>;
-+			};
-+		};
-+	};
-+};
-+
-+&vin1 {
-+	status = "okay";
-+
-+	ports {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		port@0 {
-+			vin1ep0: endpoint {
-+				csi,select = "csi40";
-+				virtual,channel = <1>;
-+				data-lanes = <1 2 3 4>;
-+				remote-endpoint = <&ov106xx_in1>;
-+			};
-+		};
-+		port@1 {
-+			csi0ep1: endpoint {
-+				remote-endpoint = <&csi2_40_ep>;
-+			};
-+		};
-+		port@2 {
-+			vin1_max9286_des0ep1: endpoint@0 {
-+				remote-endpoint = <&max9286_des0ep1>;
-+			};
-+			vin1_ti964_des0ep1: endpoint@1 {
-+				remote-endpoint = <&ti964_des0ep1>;
-+			};
-+			vin1_ti954_des0ep1: endpoint@2 {
-+				remote-endpoint = <&ti954_des0ep1>;
-+			};
-+		};
-+	};
-+};
-+
-+&vin2 {
-+	status = "okay";
-+
-+	ports {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		port@0 {
-+			vin2ep0: endpoint {
-+				csi,select = "csi40";
-+				virtual,channel = <2>;
-+				data-lanes = <1 2 3 4>;
-+				remote-endpoint = <&ov106xx_in2>;
-+			};
-+		};
-+		port@1 {
-+			csi0ep2: endpoint {
-+				remote-endpoint = <&csi2_40_ep>;
-+			};
-+		};
-+		port@2 {
-+			vin2_max9286_des0ep2: endpoint@0 {
-+				remote-endpoint = <&max9286_des0ep2>;
-+			};
-+			vin2_ti964_des0ep2: endpoint@1 {
-+				remote-endpoint = <&ti964_des0ep2>;
-+			};
-+		};
-+	};
-+};
-+
-+&vin3 {
-+	status = "okay";
-+
-+	ports {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		port@0 {
-+			vin3ep0: endpoint {
-+				csi,select = "csi40";
-+				virtual,channel = <3>;
-+				data-lanes = <1 2 3 4>;
-+				remote-endpoint = <&ov106xx_in3>;
-+			};
-+		};
-+		port@1 {
-+			csi0ep3: endpoint {
-+				remote-endpoint = <&csi2_40_ep>;
-+			};
-+		};
-+		port@2 {
-+			vin3_max9286_des0ep3: endpoint@0 {
-+				remote-endpoint = <&max9286_des0ep3>;
-+			};
-+			vin3_ti964_des0ep3: endpoint@1 {
-+				remote-endpoint = <&ti964_des0ep3>;
-+			};
-+		};
-+	};
-+};
-+
-+&vin4 {
-+	status = "okay";
-+
-+	ports {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		port@0 {
-+			vin4ep0: endpoint {
-+				csi,select = "csi20";
-+				virtual,channel = <0>;
-+				remote-endpoint = <&rpi_camera_in>;
-+				data-lanes = <1 2>;
-+			};
-+		};
-+		port@1 {
-+			csi2ep0: endpoint {
-+				remote-endpoint = <&csi2_20_ep>;
-+			};
-+		};
-+	};
-+};
-+
-+&csi2_40 {
-+	status = "okay";
-+
-+	virtual,channel {
-+		csi2_vc0 {
-+			data,type = "ycbcr422";
-+			receive,vc = <0>;
-+		};
-+		csi2_vc1 {
-+			data,type = "ycbcr422";
-+			receive,vc = <1>;
-+		};
-+		csi2_vc2 {
-+			data,type = "ycbcr422";
-+			receive,vc = <2>;
-+		};
-+		csi2_vc3 {
-+			data,type = "ycbcr422";
-+			receive,vc = <3>;
-+		};
-+	};
-+
-+	port {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		csi2_40_ep: endpoint {
-+			clock-lanes = <0>;
-+			data-lanes = <1 2 3 4>;
-+			csi-rate = <300>;
-+		};
-+	};
-+};
-+
-+&csi2_20 {
-+	status = "okay";
-+
-+	virtual,channel {
-+		csi2_vc0 {
-+			data,type = "raw8";
-+			receive,vc = <0>;
-+		};
-+	};
-+
-+	port {
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		csi2_20_ep: endpoint {
-+			clock-lanes = <0>;
-+			data-lanes = <1 2>;
-+			csi-rate = <280>;
-+		};
-+	};
-+};
-+
-+&rcar_sound {
-+	pinctrl-0 = <&sound_clk_pins>;
-+
-+	/* Multi DAI */
-+	#sound-dai-cells = <1>;
-+
-+	rcar_sound,dai {
-+		dai0 {
-+			playback = <&ssi7>;
-+			capture  = <&ssi8>;
-+		};
-+
-+		dai1 {
-+			playback = <&ssi0 &src0 &dvc0>;
-+			capture  = <&ssi1 &src1 &dvc1>;
-+		};
-+
-+		dai2 {
-+			capture  = <&ssi6>;
-+		};
-+	};
-+};
-+
-+&sdhi3 {
-+	pinctrl-0 = <&sdhi3_pins_3v3>;
-+	pinctrl-names = "default";
-+
-+	vmmc-supply = <&wlan_en>;
-+	vqmmc-supply = <&vccq_sdhi3>;
-+	keep-power-in-suspend;
-+	enable-sdio-wakeup;
-+	bus-width = <4>;
-+	no-1-8-v;
-+	non-removable;
-+	cap-power-off-card;
-+	max-frequency = <26000000>;
-+	status = "okay";
-+
-+	#address-cells = <1>;
-+	#size-cells = <0>;
-+	wlcore: wlcore@2 {
-+		compatible = "ti,wl1837";
-+		reg = <2>;
-+		interrupt-parent = <&gpio1>;
-+		interrupts = <25 IRQ_TYPE_EDGE_RISING>;
-+	};
-+};
-+
-+&usb2_phy0 {
-+	pinctrl-0 = <&usb0_pins>;
-+	pinctrl-names = "default";
-+
-+	status = "okay";
-+};
-+
-+&hsusb {
-+	status = "okay";
-+};
-+
-+&ehci0 {
-+	status = "okay";
-+};
-+
-+&ohci0 {
-+	status = "okay";
-+};
-+
-+&xhci0 {
-+	status = "okay";
-+};
-+
-+&msiof1 {
-+	status = "disabled";
-+};
-+
-+&can0 {
-+	pinctrl-0 = <&can0_pins>;
-+	pinctrl-names = "default";
-+	status = "okay";
-+
-+	renesas,can-clock-select = <0x0>;
-+};
-+
-+&can1 {
-+	pinctrl-0 = <&can1_pins>;
-+	pinctrl-names = "default";
-+	status = "okay";
-+
-+	renesas,can-clock-select = <0x0>;
-+};
-+
-+&canfd {
-+	pinctrl-0 = <&canfd0_pins &canfd1_pins>;
-+	pinctrl-names = "default";
-+	status = "disabled";
-+
-+	channel0 {
-+		status = "okay";
-+	};
-+
-+	channel1 {
-+		status = "okay";
-+	};
-+};
-+
-+/* uncomment to enable CN47: SD on SDHI3 */
-+//#include "ulcb-kf-sd3.dtsi"
--- 
-1.9.1
-