diff options
author | Thao Nguyen <thao.nguyen.yb@rvc.renesas.com> | 2017-04-17 09:56:20 +0700 |
---|---|---|
committer | Khiem Nguyen <khiem.nguyen.xt@renesas.com> | 2017-04-19 09:56:54 +0700 |
commit | a12483ddadd6263e424dca64adef7861b04d8604 (patch) | |
tree | a4d8368a8bf5d513973ab080fc86ba3576e8654f /meta-rcar-gen3/conf | |
parent | 4979e05406c77524cf90b308ce4bf2a72032ee65 (diff) |
rcar-gen3: linux-renesas: Upgrade Linux BSP to v3.5.3
This commit upgrades Linux BSP to v3.5.3
and adds device tree file for M3 Salvator-XS board to salvator-x.conf.
Linux BSP to v3.5.3 updates following items:
Kernel core
- Add workaround for PRR register of R-Car M3 WS1.1.
(Fix printing cpu info.)
- Add device tree file for Salvator-XS board with R-Car M3.
- Fix R-Car M3 Salvator-X device tree file for MIX function
of Audio driver.
Power Management
- Mark the OPP to be used during system suspend.
- Enable CPUIdle function.
- Apply new CPUIdle parameters.
Audio driver
- Confirm this driver can resume with Suspend to RAM during capture.
- Avoid SSI_MODEx settings for SSI8.
- Clear DE bit only in PDMACHCR when it stops.
- Tidyup Audio-DMAC channel for DVC.
- Enable PCM RATE until 192000.
- Fix the setting of saved_rate during the resume process.
Display driver
- Fix the problem that the flicker may occur during rendering
by the application.
- Add brs option check for VGA connector.
- Add routing set for digital RGB previously.
DMA Engine driver
- Fix release resources after interrupt process.
Ethernet driver
- Add phy-reset-gpios.
This driver can work after Suspend to RAM with Salvator-XS board.
- Fix GIS_PTMF bit clearing in ravb_ptp_interrupt.
I2C driver
- Revert and fix about unnecessary function related to Suspend to RAM.
MSIOF driver
- Fix SPI division value setting of R-Car M3
based on hardware specification.
- Allow interrupts during msiof slave mode transfer wait.
- Revert and fix about unnecessary function related to Suspend to RAM.
RWDT driver
- Fix timeout count calculation.
SCIF/HSCIF driver
- Fix panic when serial console and DMA are enabled.
- Revert about unnecessary function related to Suspend to RAM.
SD/MMC driver
- Wait for CBSY instead of SCLKDIVEN.
- Add re-tuning condition.
- Add internal DMAC reset at startup.
- Add the driver strength setting.
eMMC HS400 mode can work with R-Car M3 WS1.1 on Salvator-XS board.
Thermal driver
- Fix to support thermal for both M3 WS1.0 and WS1.1.
Video Capture driver
- Fix resuming procedure.
- Fix first field detection control.
- Fix 720x480p transfer rate.
- Fix video standard selection register setting.
Change-Id: I3b0d6237c9d0c56a9f2870f1fde89ea215f163cd
Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
Diffstat (limited to 'meta-rcar-gen3/conf')
-rw-r--r-- | meta-rcar-gen3/conf/machine/salvator-x.conf | 5 |
1 files changed, 4 insertions, 1 deletions
diff --git a/meta-rcar-gen3/conf/machine/salvator-x.conf b/meta-rcar-gen3/conf/machine/salvator-x.conf index 59e4469..48e8b8f 100644 --- a/meta-rcar-gen3/conf/machine/salvator-x.conf +++ b/meta-rcar-gen3/conf/machine/salvator-x.conf @@ -28,7 +28,10 @@ KERNEL_DEVICETREE_r8a7795 = " \ renesas/r8a7795-salvator-xs.dtb \ " # Device tree for M3 -KERNEL_DEVICETREE_r8a7796 = "renesas/r8a7796-salvator-x.dtb" +KERNEL_DEVICETREE_r8a7796 = " \ + renesas/r8a7796-salvator-x.dtb \ + renesas/r8a7796-salvator-xs.dtb \ +" # Configuration for ARM Trusted Firmware EXTRA_IMAGEDEPENDS += " arm-trusted-firmware optee-os" |