summaryrefslogtreecommitdiffstats
path: root/meta-rcar-gen3/docs/sample
diff options
context:
space:
mode:
authorTakamitsu Honda <takamitsu.honda.pv@renesas.com>2017-01-27 11:47:06 +0900
committerTakamitsu Honda <takamitsu.honda.pv@renesas.com>2017-01-27 11:47:06 +0900
commit3613b2780a6b5d5d70ea6802be5060a8214cbdb5 (patch)
treefab60ccb7b38da7e8558a2879885f06e5b0662d2 /meta-rcar-gen3/docs/sample
Renesas BSP v3.5.1 (kernel v4.9 stable) [Environment] poky: yocto-2.1.2 (cca8dd15c8096626052f6d8d25ff1e9a606104a3) meta-openembedded: 55c8a76da5dc099a7bc3838495c672140cedb78e meta-linaro: 2f51d38048599d9878f149d6d15539fb97603f8f [Information] - U-boot: Changed load address from H'49000000 to H'50000000 - XDG_RUNTIME_DIR has been changed from "/run/user/root" to "/run/user/0" - Change location of include directory, which stores common user header files, to $(INCSHARED) - In BSP Only, core-image-weston is not supported even though local-wayland.conf is provided. - Please set Salvator-x SW7 Pin-1. In after Yocto BSP v2.12.0, it is  necessary to enable BKUP_TRG signal for Suspend to RAM. - The dtb filename was changed in R-Car H3. Only "Image-r8a7795-es1-salvator-x.dtb" is supported in this version. Please use "Image-r8a7795-es1-salvator-x.dtb" It supports R-Car H3 WS1.0 and WS1.1. - Please update your local.conf and bblayers.conf corresponding to Yocto v2.16.0 package. You can refer to meta-rcargen3/docs/sample/conf/ for updated contents. - You have to re-compile out-of-recipe software like user application by v2.16.0 SDK toolchains. - In some boards, the resuming from System Suspend to RAM may cause unstable operation or failed to resume. Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
Diffstat (limited to 'meta-rcar-gen3/docs/sample')
-rw-r--r--meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/bblayers.conf16
-rw-r--r--meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local-wayland.conf271
-rw-r--r--meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local.conf262
-rw-r--r--meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/bblayers.conf16
-rw-r--r--meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/local-wayland.conf283
-rw-r--r--meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/bblayers.conf16
-rw-r--r--meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/local-wayland.conf372
-rw-r--r--meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/bblayers.conf15
-rw-r--r--meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local-wayland.conf264
-rw-r--r--meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local.conf255
-rw-r--r--meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/bblayers.conf16
-rw-r--r--meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local-wayland.conf271
-rw-r--r--meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local.conf262
-rw-r--r--meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/bblayers.conf16
-rw-r--r--meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/local-wayland.conf283
-rw-r--r--meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/bblayers.conf16
-rw-r--r--meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/local-wayland.conf372
-rw-r--r--meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/bblayers.conf15
-rw-r--r--meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local-wayland.conf264
-rw-r--r--meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local.conf255
-rw-r--r--meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/bblayers.conf16
-rw-r--r--meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local-wayland.conf274
-rw-r--r--meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local.conf265
-rw-r--r--meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/bblayers.conf16
-rw-r--r--meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/local-wayland.conf286
-rw-r--r--meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/bblayers.conf16
-rw-r--r--meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/local-wayland.conf375
-rw-r--r--meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/bblayers.conf15
-rw-r--r--meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-wayland.conf267
-rw-r--r--meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local.conf258
-rwxr-xr-xmeta-rcar-gen3/docs/sample/copyscript/copy_evaproprietary_softwares.sh1345
-rwxr-xr-xmeta-rcar-gen3/docs/sample/copyscript/copy_proprietary_softwares.sh1330
-rw-r--r--meta-rcar-gen3/docs/sample/copyscript/md5list.txt54
-rw-r--r--meta-rcar-gen3/docs/sample/patch/patch-for-linaro-gcc/0001-rcar-gen3-add-readme-for-building-with-Linaro-Gcc.patch151
34 files changed, 8208 insertions, 0 deletions
diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/bblayers.conf
new file mode 100644
index 0000000..96ff8ad
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+ ${TOPDIR}/../poky/meta \
+ ${TOPDIR}/../poky/meta-poky \
+ ${TOPDIR}/../poky/meta-yocto-bsp \
+ ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+ ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+ ${TOPDIR}/../meta-linaro/meta-optee \
+ ${TOPDIR}/../meta-openembedded/meta-oe \
+ "
diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local-wayland.conf
new file mode 100644
index 0000000..1f76008
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local-wayland.conf
@@ -0,0 +1,271 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "h3ulcb"
+
+SOC_FAMILY = "r8a7795"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+# - 'package_deb' for debian style deb files
+# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+# - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+# "dbg-pkgs" - add -dbg packages for all installed packages
+# (adds symbol information for debugging/profiling)
+# "dev-pkgs" - add -dev packages for all installed packages
+# (useful if you want to develop against libs in the image)
+# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
+# (useful if you want to run the package test suites)
+# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
+# "tools-debug" - add debugging tools (gdb, strace)
+# "eclipse-debug" - add Eclipse remote debugging support
+# "tools-profile" - add profiling tools (oprofile, lttng, valgrind)
+# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+# "debug-tweaks" - make an image suitable for development
+# e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+# - 'buildstats' collect build statistics
+# - 'image-mklibs' to reduce shared library files size for an image
+# - 'image-prelink' in order to prelink the filesystem image
+# - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+ STOPTASKS,${TMPDIR},1G,100K \
+ STOPTASKS,${DL_DIR},1G,100K \
+ STOPTASKS,${SSTATE_DIR},1G,100K \
+ STOPTASKS,/tmp,100M,100K \
+ ABORT,${TMPDIR},100M,1K \
+ ABORT,${DL_DIR},100M,1K \
+ ABORT,${SSTATE_DIR},100M,1K \
+ ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-5.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# for Wayland/Weston weston-laucher
+DISTRO_FEATURES_append = " pam"
+
+# Mask the wayland related to GFX
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Mask the gstreamer recipe for MMP
+BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Linux ICCOM driver (RCG3ZLIDL4001ZNO)
+# Linux ICCOM library (RCG3ZLILL4001ZNO)
+#DISTRO_FEATURES_append = " iccom"
diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local.conf
new file mode 100644
index 0000000..e5e2026
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local.conf
@@ -0,0 +1,262 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "h3ulcb"
+
+SOC_FAMILY = "r8a7795"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+# - 'package_deb' for debian style deb files
+# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+# - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+# "dbg-pkgs" - add -dbg packages for all installed packages
+# (adds symbol information for debugging/profiling)
+# "dev-pkgs" - add -dev packages for all installed packages
+# (useful if you want to develop against libs in the image)
+# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
+# (useful if you want to run the package test suites)
+# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
+# "tools-debug" - add debugging tools (gdb, strace)
+# "eclipse-debug" - add Eclipse remote debugging support
+# "tools-profile" - add profiling tools (oprofile, lttng, valgrind)
+# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+# "debug-tweaks" - make an image suitable for development
+# e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+# - 'buildstats' collect build statistics
+# - 'image-mklibs' to reduce shared library files size for an image
+# - 'image-prelink' in order to prelink the filesystem image
+# - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+ STOPTASKS,${TMPDIR},1G,100K \
+ STOPTASKS,${DL_DIR},1G,100K \
+ STOPTASKS,${SSTATE_DIR},1G,100K \
+ STOPTASKS,/tmp,100M,100K \
+ ABORT,${TMPDIR},100M,1K \
+ ABORT,${DL_DIR},100M,1K \
+ ABORT,${SSTATE_DIR},100M,1K \
+ ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-5.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Mask graphic Pkgs
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Linux ICCOM driver (RCG3ZLIDL4001ZNO)
+# Linux ICCOM library (RCG3ZLILL4001ZNO)
+#DISTRO_FEATURES_append = " iccom"
diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/bblayers.conf
new file mode 100644
index 0000000..96ff8ad
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+ ${TOPDIR}/../poky/meta \
+ ${TOPDIR}/../poky/meta-poky \
+ ${TOPDIR}/../poky/meta-yocto-bsp \
+ ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+ ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+ ${TOPDIR}/../meta-linaro/meta-optee \
+ ${TOPDIR}/../meta-openembedded/meta-oe \
+ "
diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/local-wayland.conf
new file mode 100644
index 0000000..aa63d8e
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/local-wayland.conf
@@ -0,0 +1,283 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "h3ulcb"
+
+SOC_FAMILY = "r8a7795"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+# - 'package_deb' for debian style deb files
+# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+# - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+# "dbg-pkgs" - add -dbg packages for all installed packages
+# (adds symbol information for debugging/profiling)
+# "dev-pkgs" - add -dev packages for all installed packages
+# (useful if you want to develop against libs in the image)
+# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
+# (useful if you want to run the package test suites)
+# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
+# "tools-debug" - add debugging tools (gdb, strace)
+# "eclipse-debug" - add Eclipse remote debugging support
+# "tools-profile" - add profiling tools (oprofile, lttng, valgrind)
+# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+# "debug-tweaks" - make an image suitable for development
+# e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+# - 'buildstats' collect build statistics
+# - 'image-mklibs' to reduce shared library files size for an image
+# - 'image-prelink' in order to prelink the filesystem image
+# - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+ STOPTASKS,${TMPDIR},1G,100K \
+ STOPTASKS,${DL_DIR},1G,100K \
+ STOPTASKS,${SSTATE_DIR},1G,100K \
+ STOPTASKS,/tmp,100M,100K \
+ ABORT,${TMPDIR},100M,1K \
+ ABORT,${DL_DIR},100M,1K \
+ ABORT,${SSTATE_DIR},100M,1K \
+ ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-5.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "gles-user-module"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Mask the gstreamer recipe for MMP
+BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Fix the Warning of gstreamer plugins
+RDEPENDS_gstreamer1.0-plugins-bad = "libwayland-egl"
+
+# Linux ICCOM driver (RCG3ZLIDL4001ZNO)
+# Linux ICCOM library (RCG3ZLILL4001ZNO)
+#DISTRO_FEATURES_append = " iccom"
diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/bblayers.conf
new file mode 100644
index 0000000..96ff8ad
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+ ${TOPDIR}/../poky/meta \
+ ${TOPDIR}/../poky/meta-poky \
+ ${TOPDIR}/../poky/meta-yocto-bsp \
+ ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+ ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+ ${TOPDIR}/../meta-linaro/meta-optee \
+ ${TOPDIR}/../meta-openembedded/meta-oe \
+ "
diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/local-wayland.conf
new file mode 100644
index 0000000..d5db020
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/local-wayland.conf
@@ -0,0 +1,372 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "h3ulcb"
+
+SOC_FAMILY = "r8a7795"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+# - 'package_deb' for debian style deb files
+# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+# - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+# "dbg-pkgs" - add -dbg packages for all installed packages
+# (adds symbol information for debugging/profiling)
+# "dev-pkgs" - add -dev packages for all installed packages
+# (useful if you want to develop against libs in the image)
+# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
+# (useful if you want to run the package test suites)
+# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
+# "tools-debug" - add debugging tools (gdb, strace)
+# "eclipse-debug" - add Eclipse remote debugging support
+# "tools-profile" - add profiling tools (oprofile, lttng, valgrind)
+# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+# "debug-tweaks" - make an image suitable for development
+# e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+# - 'buildstats' collect build statistics
+# - 'image-mklibs' to reduce shared library files size for an image
+# - 'image-prelink' in order to prelink the filesystem image
+# - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+ STOPTASKS,${TMPDIR},1G,100K \
+ STOPTASKS,${DL_DIR},1G,100K \
+ STOPTASKS,${SSTATE_DIR},1G,100K \
+ STOPTASKS,/tmp,100M,100K \
+ ABORT,${TMPDIR},100M,1K \
+ ABORT,${DL_DIR},100M,1K \
+ ABORT,${SSTATE_DIR},100M,1K \
+ ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-5.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "gles-user-module"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+
+# Enable Multimedia features
+MACHINE_FEATURES_append = " multimedia"
+
+# for gstreamer omx plugins
+LICENSE_FLAGS_WHITELIST = "commercial"
+# for mmp test program
+DISTRO_FEATURES_append = " mm-test"
+
+# for weston v4l2 renderer
+#DISTRO_FEATURES_append = " v4l2-renderer"
+
+# OMX H263 decoder library for Linux (RTM0AC0000XV263D30SL40C)
+#DISTRO_FEATURES_append = " h263dec_lib"
+
+# OMX H264 decoder library for Linux (RTM0AC0000XV264D30SL40C)
+DISTRO_FEATURES_append = " h264dec_lib"
+
+# OMX H264 encoder library for Linux (RTM0AC0000XV264E30SL40C)
+#DISTRO_FEATURES_append = " h264enc_lib"
+
+# OMX H265 decoder library for Linux (RTM0AC0000XV265D30SL40C)
+#DISTRO_FEATURES_append = " h265dec_lib"
+
+# OMX MPEG2 decoder library for Linux (RTM0AC0000XVM2VD30SL40C)
+#DISTRO_FEATURES_append = " mpeg2dec_lib"
+
+# OMX Media Component MPEG4 Decoder Library for Linux (RTM0AC0000XVM4VD30SL40C)
+#DISTRO_FEATURES_append = " mpeg4dec_lib"
+
+# OMX Media Component VC-1 Decoder Library for Linux (RTM0AC0000XVVC1D30SL40C)
+#DISTRO_FEATURES_append = " vc1dec_lib"
+
+# OMX Media Component DivXD Decoder Library for Linux (RTM0AC0000XVDVXD30SL40C)
+#DISTRO_FEATURES_append = " divxdec_lib"
+
+# OMX Media Component RealVideo Decoder Library for Linux (RTM0AC0000XVRLVD30SL40C)
+#DISTRO_FEATURES_append = " rvdec_lib"
+
+# OMX Media Component ALAC Decoder Library for Linux (RTM0AC0000XAALAD30SL40C)
+#DISTRO_FEATURES_append = " alacdec_lib"
+
+# OMX Media Component FLAC Decoder Library for Linux (RTM0AC0000XAFLAD30SL40C)
+#DISTRO_FEATURES_append = " flacdec_lib"
+
+# OMX AAC-LC decoder library for Linux (RTM0AC0000XAAACD30SL40C),
+# AAC-LC 2ch decoder middleware library for Linux (RTM0AC0000ADAACMZ1SL40C)
+DISTRO_FEATURES_append = " aaclcdec_lib"
+DISTRO_FEATURES_append = " aaclcdec_mdw"
+
+# OMX aacPlus V2 decoder library for Linux (RTM0AC0000XAAAPD30SL40C),
+# aacPlus V2 decoder middleware library for Linux (RTM0AC0000ADAAPMZ1SL40C)
+#DISTRO_FEATURES_append = " aacpv2dec_lib"
+#DISTRO_FEATURES_append = " aacpv2dec_mdw"
+
+# OMX MP3 decoder library for Linux (RTM0AC0000XAMP3D30SL40C),
+# MP3 decoder middleware library for Linux (RTM0AC0000ADMP3MZ1SL40C)
+#DISTRO_FEATURES_append = " mp3dec_lib"
+#DISTRO_FEATURES_append = " mp3dec_mdw"
+
+# OMX WMA decoder library for Linux (RTM0AC0000XAWMAD30SL40C),
+# WMA decoder middleware library for Linux (RTM0AC0000ADWMAMZ1SL40C)
+#DISTRO_FEATURES_append = " wmadec_lib"
+#DISTRO_FEATURES_append = " wmadec_mdw"
+
+# OMX AAC-LC encoder library for Linux (RTM0AC0000XAAACE30SL40C)
+# AAC-LC encoder middleware library for Linux (RTM0AC0000AEAACMZ1SL40C)
+#DISTRO_FEATURES_append = " aaclcenc_lib"
+#DISTRO_FEATURES_append = " aaclcenc_mdw"
+
+# OMX Dolby(R) Digital decoder library for Linux (RTM0AC0000XADD5D30SL40C),
+# Dolby(R) Digital decoder middleware library for Linux (RTM0AC0000ADDD5MZ1SL40C)
+#DISTRO_FEATURES_append = " dddec_lib"
+#DISTRO_FEATURES_append = " dddec_mdw"
+
+# CMS Basic Color Management Middleware for Linux (RTM0AC0000JRCMBCV0SL40C)
+#DISTRO_FEATURES_append = " cmsbcm"
+
+# CMS CMM3 Backlight Control Middleware for Linux (RTM0AC0000JRCMBLC0SL40C)
+#DISTRO_FEATURES_append = " cmsblc"
+
+# CMS VSP2 Dynamic Gamma Correction Middleware for Linux (RTM0AC0000JRCMDGV0SL40C)
+#DISTRO_FEATURES_append = " cmsdgc"
+
+# ISDB-T DTV Software Package for Linux (RTM0RC0000TE020000SL40C)
+#DISTRO_FEATURES_append = " dtv"
+
+# DVD Core-Middleware for Linux (RTM0RC0000XDVDC301SL40C)
+#DISTRO_FEATURES_append = " dvd"
+
+# ADSP Driver for Linux (RCG3AHPDL4001ZDO)
+# ADSP Interface for Linux (RCG3AHIFL4001ZDP)
+# ADSP Framework (RCG3AHFWN0101ZDP)
+#DISTRO_FEATURES_append = " adsp"
+
+# AVB Software Package for Linux
+#DISTRO_FEATURES_append = " avb"
+
+# Linux ICCOM driver (RCG3ZLIDL4001ZNO)
+# Linux ICCOM library (RCG3ZLILL4001ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Evaluation packages
+#DISTRO_FEATURES_append = " use_eva_pkg"
diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/bblayers.conf
new file mode 100644
index 0000000..3b2c068
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/bblayers.conf
@@ -0,0 +1,15 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+ ${TOPDIR}/../poky/meta \
+ ${TOPDIR}/../poky/meta-poky \
+ ${TOPDIR}/../poky/meta-yocto-bsp \
+ ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+ ${TOPDIR}/../meta-openembedded/meta-oe \
+ ${TOPDIR}/../meta-linaro/meta-optee \
+ "
diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local-wayland.conf
new file mode 100644
index 0000000..b01fb82
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local-wayland.conf
@@ -0,0 +1,264 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "h3ulcb"
+
+SOC_FAMILY = "r8a7795"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+# - 'package_deb' for debian style deb files
+# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+# - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+# "dbg-pkgs" - add -dbg packages for all installed packages
+# (adds symbol information for debugging/profiling)
+# "dev-pkgs" - add -dev packages for all installed packages
+# (useful if you want to develop against libs in the image)
+# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
+# (useful if you want to run the package test suites)
+# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
+# "tools-debug" - add debugging tools (gdb, strace)
+# "eclipse-debug" - add Eclipse remote debugging support
+# "tools-profile" - add profiling tools (oprofile, lttng, valgrind)
+# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+# "debug-tweaks" - make an image suitable for development
+# e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+# - 'buildstats' collect build statistics
+# - 'image-mklibs' to reduce shared library files size for an image
+# - 'image-prelink' in order to prelink the filesystem image
+# - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+ STOPTASKS,${TMPDIR},1G,100K \
+ STOPTASKS,${DL_DIR},1G,100K \
+ STOPTASKS,${SSTATE_DIR},1G,100K \
+ STOPTASKS,/tmp,100M,100K \
+ ABORT,${TMPDIR},100M,1K \
+ ABORT,${DL_DIR},100M,1K \
+ ABORT,${SSTATE_DIR},100M,1K \
+ ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# for Wayland/Weston weston-laucher
+DISTRO_FEATURES_append = " pam"
+
+# Mask the wayland related to GFX
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Mask the gstreamer recipe for MMP
+BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local.conf
new file mode 100644
index 0000000..c7128c4
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local.conf
@@ -0,0 +1,255 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "h3ulcb"
+
+SOC_FAMILY = "r8a7795"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+# - 'package_deb' for debian style deb files
+# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+# - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+# "dbg-pkgs" - add -dbg packages for all installed packages
+# (adds symbol information for debugging/profiling)
+# "dev-pkgs" - add -dev packages for all installed packages
+# (useful if you want to develop against libs in the image)
+# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
+# (useful if you want to run the package test suites)
+# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
+# "tools-debug" - add debugging tools (gdb, strace)
+# "eclipse-debug" - add Eclipse remote debugging support
+# "tools-profile" - add profiling tools (oprofile, lttng, valgrind)
+# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+# "debug-tweaks" - make an image suitable for development
+# e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+# - 'buildstats' collect build statistics
+# - 'image-mklibs' to reduce shared library files size for an image
+# - 'image-prelink' in order to prelink the filesystem image
+# - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+ STOPTASKS,${TMPDIR},1G,100K \
+ STOPTASKS,${DL_DIR},1G,100K \
+ STOPTASKS,${SSTATE_DIR},1G,100K \
+ STOPTASKS,/tmp,100M,100K \
+ ABORT,${TMPDIR},100M,1K \
+ ABORT,${DL_DIR},100M,1K \
+ ABORT,${SSTATE_DIR},100M,1K \
+ ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Mask graphic Pkgs
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/bblayers.conf
new file mode 100644
index 0000000..96ff8ad
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+ ${TOPDIR}/../poky/meta \
+ ${TOPDIR}/../poky/meta-poky \
+ ${TOPDIR}/../poky/meta-yocto-bsp \
+ ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+ ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+ ${TOPDIR}/../meta-linaro/meta-optee \
+ ${TOPDIR}/../meta-openembedded/meta-oe \
+ "
diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local-wayland.conf
new file mode 100644
index 0000000..054c44b
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local-wayland.conf
@@ -0,0 +1,271 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "m3ulcb"
+
+SOC_FAMILY = "r8a7796"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+# - 'package_deb' for debian style deb files
+# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+# - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+# "dbg-pkgs" - add -dbg packages for all installed packages
+# (adds symbol information for debugging/profiling)
+# "dev-pkgs" - add -dev packages for all installed packages
+# (useful if you want to develop against libs in the image)
+# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
+# (useful if you want to run the package test suites)
+# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
+# "tools-debug" - add debugging tools (gdb, strace)
+# "eclipse-debug" - add Eclipse remote debugging support
+# "tools-profile" - add profiling tools (oprofile, lttng, valgrind)
+# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+# "debug-tweaks" - make an image suitable for development
+# e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+# - 'buildstats' collect build statistics
+# - 'image-mklibs' to reduce shared library files size for an image
+# - 'image-prelink' in order to prelink the filesystem image
+# - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+ STOPTASKS,${TMPDIR},1G,100K \
+ STOPTASKS,${DL_DIR},1G,100K \
+ STOPTASKS,${SSTATE_DIR},1G,100K \
+ STOPTASKS,/tmp,100M,100K \
+ ABORT,${TMPDIR},100M,1K \
+ ABORT,${DL_DIR},100M,1K \
+ ABORT,${SSTATE_DIR},100M,1K \
+ ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-5.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# for Wayland/Weston weston-laucher
+DISTRO_FEATURES_append = " pam"
+
+# Mask the wayland related to GFX
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Mask the gstreamer recipe for MMP
+BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Linux ICCOM driver (RCG3ZLIDL4001ZNO)
+# Linux ICCOM library (RCG3ZLILL4001ZNO)
+#DISTRO_FEATURES_append = " iccom"
diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local.conf
new file mode 100644
index 0000000..9583dd6
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local.conf
@@ -0,0 +1,262 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "m3ulcb"
+
+SOC_FAMILY = "r8a7796"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+# - 'package_deb' for debian style deb files
+# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+# - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+# "dbg-pkgs" - add -dbg packages for all installed packages
+# (adds symbol information for debugging/profiling)
+# "dev-pkgs" - add -dev packages for all installed packages
+# (useful if you want to develop against libs in the image)
+# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
+# (useful if you want to run the package test suites)
+# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
+# "tools-debug" - add debugging tools (gdb, strace)
+# "eclipse-debug" - add Eclipse remote debugging support
+# "tools-profile" - add profiling tools (oprofile, lttng, valgrind)
+# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+# "debug-tweaks" - make an image suitable for development
+# e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+# - 'buildstats' collect build statistics
+# - 'image-mklibs' to reduce shared library files size for an image
+# - 'image-prelink' in order to prelink the filesystem image
+# - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+ STOPTASKS,${TMPDIR},1G,100K \
+ STOPTASKS,${DL_DIR},1G,100K \
+ STOPTASKS,${SSTATE_DIR},1G,100K \
+ STOPTASKS,/tmp,100M,100K \
+ ABORT,${TMPDIR},100M,1K \
+ ABORT,${DL_DIR},100M,1K \
+ ABORT,${SSTATE_DIR},100M,1K \
+ ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-5.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Mask graphic Pkgs
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Linux ICCOM driver (RCG3ZLIDL4001ZNO)
+# Linux ICCOM library (RCG3ZLILL4001ZNO)
+#DISTRO_FEATURES_append = " iccom"
diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/bblayers.conf
new file mode 100644
index 0000000..96ff8ad
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+ ${TOPDIR}/../poky/meta \
+ ${TOPDIR}/../poky/meta-poky \
+ ${TOPDIR}/../poky/meta-yocto-bsp \
+ ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+ ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+ ${TOPDIR}/../meta-linaro/meta-optee \
+ ${TOPDIR}/../meta-openembedded/meta-oe \
+ "
diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/local-wayland.conf
new file mode 100644
index 0000000..fdf452c
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/local-wayland.conf
@@ -0,0 +1,283 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "m3ulcb"
+
+SOC_FAMILY = "r8a7796"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+# - 'package_deb' for debian style deb files
+# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+# - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+# "dbg-pkgs" - add -dbg packages for all installed packages
+# (adds symbol information for debugging/profiling)
+# "dev-pkgs" - add -dev packages for all installed packages
+# (useful if you want to develop against libs in the image)
+# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
+# (useful if you want to run the package test suites)
+# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
+# "tools-debug" - add debugging tools (gdb, strace)
+# "eclipse-debug" - add Eclipse remote debugging support
+# "tools-profile" - add profiling tools (oprofile, lttng, valgrind)
+# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+# "debug-tweaks" - make an image suitable for development
+# e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+# - 'buildstats' collect build statistics
+# - 'image-mklibs' to reduce shared library files size for an image
+# - 'image-prelink' in order to prelink the filesystem image
+# - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+ STOPTASKS,${TMPDIR},1G,100K \
+ STOPTASKS,${DL_DIR},1G,100K \
+ STOPTASKS,${SSTATE_DIR},1G,100K \
+ STOPTASKS,/tmp,100M,100K \
+ ABORT,${TMPDIR},100M,1K \
+ ABORT,${DL_DIR},100M,1K \
+ ABORT,${SSTATE_DIR},100M,1K \
+ ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-5.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "gles-user-module"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Mask the gstreamer recipe for MMP
+BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Fix the Warning of gstreamer plugins
+RDEPENDS_gstreamer1.0-plugins-bad = "libwayland-egl"
+
+# Linux ICCOM driver (RCG3ZLIDL4001ZNO)
+# Linux ICCOM library (RCG3ZLILL4001ZNO)
+#DISTRO_FEATURES_append = " iccom"
diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/bblayers.conf
new file mode 100644
index 0000000..96ff8ad
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+ ${TOPDIR}/../poky/meta \
+ ${TOPDIR}/../poky/meta-poky \
+ ${TOPDIR}/../poky/meta-yocto-bsp \
+ ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+ ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+ ${TOPDIR}/../meta-linaro/meta-optee \
+ ${TOPDIR}/../meta-openembedded/meta-oe \
+ "
diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/local-wayland.conf
new file mode 100644
index 0000000..205c6df
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/local-wayland.conf
@@ -0,0 +1,372 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "m3ulcb"
+
+SOC_FAMILY = "r8a7796"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+# - 'package_deb' for debian style deb files
+# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+# - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+# "dbg-pkgs" - add -dbg packages for all installed packages
+# (adds symbol information for debugging/profiling)
+# "dev-pkgs" - add -dev packages for all installed packages
+# (useful if you want to develop against libs in the image)
+# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
+# (useful if you want to run the package test suites)
+# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
+# "tools-debug" - add debugging tools (gdb, strace)
+# "eclipse-debug" - add Eclipse remote debugging support
+# "tools-profile" - add profiling tools (oprofile, lttng, valgrind)
+# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+# "debug-tweaks" - make an image suitable for development
+# e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+# - 'buildstats' collect build statistics
+# - 'image-mklibs' to reduce shared library files size for an image
+# - 'image-prelink' in order to prelink the filesystem image
+# - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+ STOPTASKS,${TMPDIR},1G,100K \
+ STOPTASKS,${DL_DIR},1G,100K \
+ STOPTASKS,${SSTATE_DIR},1G,100K \
+ STOPTASKS,/tmp,100M,100K \
+ ABORT,${TMPDIR},100M,1K \
+ ABORT,${DL_DIR},100M,1K \
+ ABORT,${SSTATE_DIR},100M,1K \
+ ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-5.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "gles-user-module"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+
+# Enable Multimedia features
+MACHINE_FEATURES_append = " multimedia"
+
+# for gstreamer omx plugins
+LICENSE_FLAGS_WHITELIST = "commercial"
+# for mmp test program
+DISTRO_FEATURES_append = " mm-test"
+
+# for weston v4l2 renderer
+#DISTRO_FEATURES_append = " v4l2-renderer"
+
+# OMX H263 decoder library for Linux (RTM0AC0000XV263D30SL40C)
+#DISTRO_FEATURES_append = " h263dec_lib"
+
+# OMX H264 decoder library for Linux (RTM0AC0000XV264D30SL40C)
+DISTRO_FEATURES_append = " h264dec_lib"
+
+# OMX H264 encoder library for Linux (RTM0AC0000XV264E30SL40C)
+#DISTRO_FEATURES_append = " h264enc_lib"
+
+# OMX H265 decoder library for Linux (RTM0AC0000XV265D30SL40C)
+#DISTRO_FEATURES_append = " h265dec_lib"
+
+# OMX MPEG2 decoder library for Linux (RTM0AC0000XVM2VD30SL40C)
+#DISTRO_FEATURES_append = " mpeg2dec_lib"
+
+# OMX Media Component MPEG4 Decoder Library for Linux (RTM0AC0000XVM4VD30SL40C)
+#DISTRO_FEATURES_append = " mpeg4dec_lib"
+
+# OMX Media Component VC-1 Decoder Library for Linux (RTM0AC0000XVVC1D30SL40C)
+#DISTRO_FEATURES_append = " vc1dec_lib"
+
+# OMX Media Component DivXD Decoder Library for Linux (RTM0AC0000XVDVXD30SL40C)
+#DISTRO_FEATURES_append = " divxdec_lib"
+
+# OMX Media Component RealVideo Decoder Library for Linux (RTM0AC0000XVRLVD30SL40C)
+#DISTRO_FEATURES_append = " rvdec_lib"
+
+# OMX Media Component ALAC Decoder Library for Linux (RTM0AC0000XAALAD30SL40C)
+#DISTRO_FEATURES_append = " alacdec_lib"
+
+# OMX Media Component FLAC Decoder Library for Linux (RTM0AC0000XAFLAD30SL40C)
+#DISTRO_FEATURES_append = " flacdec_lib"
+
+# OMX AAC-LC decoder library for Linux (RTM0AC0000XAAACD30SL40C),
+# AAC-LC 2ch decoder middleware library for Linux (RTM0AC0000ADAACMZ1SL40C)
+DISTRO_FEATURES_append = " aaclcdec_lib"
+DISTRO_FEATURES_append = " aaclcdec_mdw"
+
+# OMX aacPlus V2 decoder library for Linux (RTM0AC0000XAAAPD30SL40C),
+# aacPlus V2 decoder middleware library for Linux (RTM0AC0000ADAAPMZ1SL40C)
+#DISTRO_FEATURES_append = " aacpv2dec_lib"
+#DISTRO_FEATURES_append = " aacpv2dec_mdw"
+
+# OMX MP3 decoder library for Linux (RTM0AC0000XAMP3D30SL40C),
+# MP3 decoder middleware library for Linux (RTM0AC0000ADMP3MZ1SL40C)
+#DISTRO_FEATURES_append = " mp3dec_lib"
+#DISTRO_FEATURES_append = " mp3dec_mdw"
+
+# OMX WMA decoder library for Linux (RTM0AC0000XAWMAD30SL40C),
+# WMA decoder middleware library for Linux (RTM0AC0000ADWMAMZ1SL40C)
+#DISTRO_FEATURES_append = " wmadec_lib"
+#DISTRO_FEATURES_append = " wmadec_mdw"
+
+# OMX AAC-LC encoder library for Linux (RTM0AC0000XAAACE30SL40C)
+# AAC-LC encoder middleware library for Linux (RTM0AC0000AEAACMZ1SL40C)
+#DISTRO_FEATURES_append = " aaclcenc_lib"
+#DISTRO_FEATURES_append = " aaclcenc_mdw"
+
+# OMX Dolby(R) Digital decoder library for Linux (RTM0AC0000XADD5D30SL40C),
+# Dolby(R) Digital decoder middleware library for Linux (RTM0AC0000ADDD5MZ1SL40C)
+#DISTRO_FEATURES_append = " dddec_lib"
+#DISTRO_FEATURES_append = " dddec_mdw"
+
+# CMS Basic Color Management Middleware for Linux (RTM0AC0000JRCMBCV0SL40C)
+#DISTRO_FEATURES_append = " cmsbcm"
+
+# CMS CMM3 Backlight Control Middleware for Linux (RTM0AC0000JRCMBLC0SL40C)
+#DISTRO_FEATURES_append = " cmsblc"
+
+# CMS VSP2 Dynamic Gamma Correction Middleware for Linux (RTM0AC0000JRCMDGV0SL40C)
+#DISTRO_FEATURES_append = " cmsdgc"
+
+# ISDB-T DTV Software Package for Linux (RTM0RC0000TE020000SL40C)
+#DISTRO_FEATURES_append = " dtv"
+
+# DVD Core-Middleware for Linux (RTM0RC0000XDVDC301SL40C)
+#DISTRO_FEATURES_append = " dvd"
+
+# ADSP Driver for Linux (RCG3AHPDL4001ZDO)
+# ADSP Interface for Linux (RCG3AHIFL4001ZDP)
+# ADSP Framework (RCG3AHFWN0101ZDP)
+#DISTRO_FEATURES_append = " adsp"
+
+# AVB Software Package for Linux
+#DISTRO_FEATURES_append = " avb"
+
+# Linux ICCOM driver (RCG3ZLIDL4001ZNO)
+# Linux ICCOM library (RCG3ZLILL4001ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Evaluation packages
+#DISTRO_FEATURES_append = " use_eva_pkg"
diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/bblayers.conf
new file mode 100644
index 0000000..3b2c068
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/bblayers.conf
@@ -0,0 +1,15 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+ ${TOPDIR}/../poky/meta \
+ ${TOPDIR}/../poky/meta-poky \
+ ${TOPDIR}/../poky/meta-yocto-bsp \
+ ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+ ${TOPDIR}/../meta-openembedded/meta-oe \
+ ${TOPDIR}/../meta-linaro/meta-optee \
+ "
diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local-wayland.conf
new file mode 100644
index 0000000..2bd2154
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local-wayland.conf
@@ -0,0 +1,264 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "m3ulcb"
+
+SOC_FAMILY = "r8a7796"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+# - 'package_deb' for debian style deb files
+# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+# - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+# "dbg-pkgs" - add -dbg packages for all installed packages
+# (adds symbol information for debugging/profiling)
+# "dev-pkgs" - add -dev packages for all installed packages
+# (useful if you want to develop against libs in the image)
+# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
+# (useful if you want to run the package test suites)
+# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
+# "tools-debug" - add debugging tools (gdb, strace)
+# "eclipse-debug" - add Eclipse remote debugging support
+# "tools-profile" - add profiling tools (oprofile, lttng, valgrind)
+# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+# "debug-tweaks" - make an image suitable for development
+# e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+# - 'buildstats' collect build statistics
+# - 'image-mklibs' to reduce shared library files size for an image
+# - 'image-prelink' in order to prelink the filesystem image
+# - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+ STOPTASKS,${TMPDIR},1G,100K \
+ STOPTASKS,${DL_DIR},1G,100K \
+ STOPTASKS,${SSTATE_DIR},1G,100K \
+ STOPTASKS,/tmp,100M,100K \
+ ABORT,${TMPDIR},100M,1K \
+ ABORT,${DL_DIR},100M,1K \
+ ABORT,${SSTATE_DIR},100M,1K \
+ ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# for Wayland/Weston weston-laucher
+DISTRO_FEATURES_append = " pam"
+
+# Mask graphic Pkgs
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Mask the gstreamer recipe for MMP
+BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local.conf
new file mode 100644
index 0000000..f682e03
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local.conf
@@ -0,0 +1,255 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "m3ulcb"
+
+SOC_FAMILY = "r8a7796"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+# - 'package_deb' for debian style deb files
+# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+# - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+# "dbg-pkgs" - add -dbg packages for all installed packages
+# (adds symbol information for debugging/profiling)
+# "dev-pkgs" - add -dev packages for all installed packages
+# (useful if you want to develop against libs in the image)
+# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
+# (useful if you want to run the package test suites)
+# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
+# "tools-debug" - add debugging tools (gdb, strace)
+# "eclipse-debug" - add Eclipse remote debugging support
+# "tools-profile" - add profiling tools (oprofile, lttng, valgrind)
+# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+# "debug-tweaks" - make an image suitable for development
+# e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+# - 'buildstats' collect build statistics
+# - 'image-mklibs' to reduce shared library files size for an image
+# - 'image-prelink' in order to prelink the filesystem image
+# - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+ STOPTASKS,${TMPDIR},1G,100K \
+ STOPTASKS,${DL_DIR},1G,100K \
+ STOPTASKS,${SSTATE_DIR},1G,100K \
+ STOPTASKS,/tmp,100M,100K \
+ ABORT,${TMPDIR},100M,1K \
+ ABORT,${DL_DIR},100M,1K \
+ ABORT,${SSTATE_DIR},100M,1K \
+ ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Mask graphic Pkgs
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/bblayers.conf
new file mode 100644
index 0000000..96ff8ad
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+ ${TOPDIR}/../poky/meta \
+ ${TOPDIR}/../poky/meta-poky \
+ ${TOPDIR}/../poky/meta-yocto-bsp \
+ ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+ ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+ ${TOPDIR}/../meta-linaro/meta-optee \
+ ${TOPDIR}/../meta-openembedded/meta-oe \
+ "
diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local-wayland.conf
new file mode 100644
index 0000000..1458e29
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local-wayland.conf
@@ -0,0 +1,274 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "salvator-x"
+
+# This sets the SoC
+# H3: r8a7795, M3: r8a7796
+SOC_FAMILY = "r8a7795"
+#SOC_FAMILY = "r8a7796"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+# - 'package_deb' for debian style deb files
+# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+# - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+# "dbg-pkgs" - add -dbg packages for all installed packages
+# (adds symbol information for debugging/profiling)
+# "dev-pkgs" - add -dev packages for all installed packages
+# (useful if you want to develop against libs in the image)
+# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
+# (useful if you want to run the package test suites)
+# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
+# "tools-debug" - add debugging tools (gdb, strace)
+# "eclipse-debug" - add Eclipse remote debugging support
+# "tools-profile" - add profiling tools (oprofile, lttng, valgrind)
+# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+# "debug-tweaks" - make an image suitable for development
+# e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+# - 'buildstats' collect build statistics
+# - 'image-mklibs' to reduce shared library files size for an image
+# - 'image-prelink' in order to prelink the filesystem image
+# - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+ STOPTASKS,${TMPDIR},1G,100K \
+ STOPTASKS,${DL_DIR},1G,100K \
+ STOPTASKS,${SSTATE_DIR},1G,100K \
+ STOPTASKS,/tmp,100M,100K \
+ ABORT,${TMPDIR},100M,1K \
+ ABORT,${DL_DIR},100M,1K \
+ ABORT,${SSTATE_DIR},100M,1K \
+ ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-5.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# for Wayland/Weston weston-laucher
+DISTRO_FEATURES_append = " pam"
+
+# Mask the wayland related to GFX
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Mask the gstreamer recipe for MMP
+BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Linux ICCOM driver (RCG3ZLIDL4001ZNO)
+# Linux ICCOM library (RCG3ZLILL4001ZNO)
+#DISTRO_FEATURES_append = " iccom"
diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local.conf
new file mode 100644
index 0000000..bab7f0c
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local.conf
@@ -0,0 +1,265 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "salvator-x"
+
+# This sets the SoC
+# H3: r8a7795, M3: r8a7796
+SOC_FAMILY = "r8a7795"
+#SOC_FAMILY = "r8a7796"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+# - 'package_deb' for debian style deb files
+# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+# - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+# "dbg-pkgs" - add -dbg packages for all installed packages
+# (adds symbol information for debugging/profiling)
+# "dev-pkgs" - add -dev packages for all installed packages
+# (useful if you want to develop against libs in the image)
+# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
+# (useful if you want to run the package test suites)
+# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
+# "tools-debug" - add debugging tools (gdb, strace)
+# "eclipse-debug" - add Eclipse remote debugging support
+# "tools-profile" - add profiling tools (oprofile, lttng, valgrind)
+# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+# "debug-tweaks" - make an image suitable for development
+# e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+# - 'buildstats' collect build statistics
+# - 'image-mklibs' to reduce shared library files size for an image
+# - 'image-prelink' in order to prelink the filesystem image
+# - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+ STOPTASKS,${TMPDIR},1G,100K \
+ STOPTASKS,${DL_DIR},1G,100K \
+ STOPTASKS,${SSTATE_DIR},1G,100K \
+ STOPTASKS,/tmp,100M,100K \
+ ABORT,${TMPDIR},100M,1K \
+ ABORT,${DL_DIR},100M,1K \
+ ABORT,${SSTATE_DIR},100M,1K \
+ ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-5.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Mask graphic Pkgs
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Linux ICCOM driver (RCG3ZLIDL4001ZNO)
+# Linux ICCOM library (RCG3ZLILL4001ZNO)
+#DISTRO_FEATURES_append = " iccom"
diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/bblayers.conf
new file mode 100644
index 0000000..96ff8ad
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+ ${TOPDIR}/../poky/meta \
+ ${TOPDIR}/../poky/meta-poky \
+ ${TOPDIR}/../poky/meta-yocto-bsp \
+ ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+ ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+ ${TOPDIR}/../meta-linaro/meta-optee \
+ ${TOPDIR}/../meta-openembedded/meta-oe \
+ "
diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/local-wayland.conf
new file mode 100644
index 0000000..9a80463
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/local-wayland.conf
@@ -0,0 +1,286 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "salvator-x"
+
+# This sets the SoC
+# H3: r8a7795, M3: r8a7796
+SOC_FAMILY = "r8a7795"
+#SOC_FAMILY = "r8a7796"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+# - 'package_deb' for debian style deb files
+# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+# - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+# "dbg-pkgs" - add -dbg packages for all installed packages
+# (adds symbol information for debugging/profiling)
+# "dev-pkgs" - add -dev packages for all installed packages
+# (useful if you want to develop against libs in the image)
+# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
+# (useful if you want to run the package test suites)
+# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
+# "tools-debug" - add debugging tools (gdb, strace)
+# "eclipse-debug" - add Eclipse remote debugging support
+# "tools-profile" - add profiling tools (oprofile, lttng, valgrind)
+# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+# "debug-tweaks" - make an image suitable for development
+# e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+# - 'buildstats' collect build statistics
+# - 'image-mklibs' to reduce shared library files size for an image
+# - 'image-prelink' in order to prelink the filesystem image
+# - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+ STOPTASKS,${TMPDIR},1G,100K \
+ STOPTASKS,${DL_DIR},1G,100K \
+ STOPTASKS,${SSTATE_DIR},1G,100K \
+ STOPTASKS,/tmp,100M,100K \
+ ABORT,${TMPDIR},100M,1K \
+ ABORT,${DL_DIR},100M,1K \
+ ABORT,${SSTATE_DIR},100M,1K \
+ ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-5.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "gles-user-module"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Mask the gstreamer recipe for MMP
+BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
+
+# Fix the Warning of gstreamer plugins
+RDEPENDS_gstreamer1.0-plugins-bad = "libwayland-egl"
+
+# Linux ICCOM driver (RCG3ZLIDL4001ZNO)
+# Linux ICCOM library (RCG3ZLILL4001ZNO)
+#DISTRO_FEATURES_append = " iccom"
diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/bblayers.conf
new file mode 100644
index 0000000..96ff8ad
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/bblayers.conf
@@ -0,0 +1,16 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+ ${TOPDIR}/../poky/meta \
+ ${TOPDIR}/../poky/meta-poky \
+ ${TOPDIR}/../poky/meta-yocto-bsp \
+ ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+ ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \
+ ${TOPDIR}/../meta-linaro/meta-optee \
+ ${TOPDIR}/../meta-openembedded/meta-oe \
+ "
diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/local-wayland.conf
new file mode 100644
index 0000000..89b3671
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/local-wayland.conf
@@ -0,0 +1,375 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "salvator-x"
+
+# This sets the SoC
+# H3: r8a7795, M3: r8a7796
+SOC_FAMILY = "r8a7795"
+#SOC_FAMILY = "r8a7796"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+# - 'package_deb' for debian style deb files
+# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+# - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+# "dbg-pkgs" - add -dbg packages for all installed packages
+# (adds symbol information for debugging/profiling)
+# "dev-pkgs" - add -dev packages for all installed packages
+# (useful if you want to develop against libs in the image)
+# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
+# (useful if you want to run the package test suites)
+# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
+# "tools-debug" - add debugging tools (gdb, strace)
+# "eclipse-debug" - add Eclipse remote debugging support
+# "tools-profile" - add profiling tools (oprofile, lttng, valgrind)
+# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+# "debug-tweaks" - make an image suitable for development
+# e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+# - 'buildstats' collect build statistics
+# - 'image-mklibs' to reduce shared library files size for an image
+# - 'image-prelink' in order to prelink the filesystem image
+# - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+ STOPTASKS,${TMPDIR},1G,100K \
+ STOPTASKS,${DL_DIR},1G,100K \
+ STOPTASKS,${SSTATE_DIR},1G,100K \
+ STOPTASKS,/tmp,100M,100K \
+ ABORT,${TMPDIR},100M,1K \
+ ABORT,${DL_DIR},100M,1K \
+ ABORT,${SSTATE_DIR},100M,1K \
+ ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# Linaro GCC
+GCCVERSION = "linaro-5.2"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Enable Gfx Pkgs
+MACHINE_FEATURES_append = " gsx"
+MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
+
+# for Wayland/Weston
+DISTRO_FEATURES_append = " pam"
+PREFERRED_PROVIDER_virtual/libgles1 = ""
+PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
+PREFERRED_PROVIDER_virtual/egl = "gles-user-module"
+PREFERRED_PROVIDER_virtual/libgl = ""
+PREFERRED_PROVIDER_virtual/mesa = ""
+PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_libgbm-dev = "libgbm"
+BBMASK .= "|mesa-gl"
+
+# Enable Multimedia features
+MACHINE_FEATURES_append = " multimedia"
+
+# for gstreamer omx plugins
+LICENSE_FLAGS_WHITELIST = "commercial"
+# for mmp test program
+DISTRO_FEATURES_append = " mm-test"
+
+# for weston v4l2 renderer
+#DISTRO_FEATURES_append = " v4l2-renderer"
+
+# OMX H263 decoder library for Linux (RTM0AC0000XV263D30SL40C)
+#DISTRO_FEATURES_append = " h263dec_lib"
+
+# OMX H264 decoder library for Linux (RTM0AC0000XV264D30SL40C)
+DISTRO_FEATURES_append = " h264dec_lib"
+
+# OMX H264 encoder library for Linux (RTM0AC0000XV264E30SL40C)
+#DISTRO_FEATURES_append = " h264enc_lib"
+
+# OMX H265 decoder library for Linux (RTM0AC0000XV265D30SL40C)
+#DISTRO_FEATURES_append = " h265dec_lib"
+
+# OMX MPEG2 decoder library for Linux (RTM0AC0000XVM2VD30SL40C)
+#DISTRO_FEATURES_append = " mpeg2dec_lib"
+
+# OMX Media Component MPEG4 Decoder Library for Linux (RTM0AC0000XVM4VD30SL40C)
+#DISTRO_FEATURES_append = " mpeg4dec_lib"
+
+# OMX Media Component VC-1 Decoder Library for Linux (RTM0AC0000XVVC1D30SL40C)
+#DISTRO_FEATURES_append = " vc1dec_lib"
+
+# OMX Media Component DivXD Decoder Library for Linux (RTM0AC0000XVDVXD30SL40C)
+#DISTRO_FEATURES_append = " divxdec_lib"
+
+# OMX Media Component RealVideo Decoder Library for Linux (RTM0AC0000XVRLVD30SL40C)
+#DISTRO_FEATURES_append = " rvdec_lib"
+
+# OMX Media Component ALAC Decoder Library for Linux (RTM0AC0000XAALAD30SL40C)
+#DISTRO_FEATURES_append = " alacdec_lib"
+
+# OMX Media Component FLAC Decoder Library for Linux (RTM0AC0000XAFLAD30SL40C)
+#DISTRO_FEATURES_append = " flacdec_lib"
+
+# OMX AAC-LC decoder library for Linux (RTM0AC0000XAAACD30SL40C),
+# AAC-LC 2ch decoder middleware library for Linux (RTM0AC0000ADAACMZ1SL40C)
+DISTRO_FEATURES_append = " aaclcdec_lib"
+DISTRO_FEATURES_append = " aaclcdec_mdw"
+
+# OMX aacPlus V2 decoder library for Linux (RTM0AC0000XAAAPD30SL40C),
+# aacPlus V2 decoder middleware library for Linux (RTM0AC0000ADAAPMZ1SL40C)
+#DISTRO_FEATURES_append = " aacpv2dec_lib"
+#DISTRO_FEATURES_append = " aacpv2dec_mdw"
+
+# OMX MP3 decoder library for Linux (RTM0AC0000XAMP3D30SL40C),
+# MP3 decoder middleware library for Linux (RTM0AC0000ADMP3MZ1SL40C)
+#DISTRO_FEATURES_append = " mp3dec_lib"
+#DISTRO_FEATURES_append = " mp3dec_mdw"
+
+# OMX WMA decoder library for Linux (RTM0AC0000XAWMAD30SL40C),
+# WMA decoder middleware library for Linux (RTM0AC0000ADWMAMZ1SL40C)
+#DISTRO_FEATURES_append = " wmadec_lib"
+#DISTRO_FEATURES_append = " wmadec_mdw"
+
+# OMX AAC-LC encoder library for Linux (RTM0AC0000XAAACE30SL40C)
+# AAC-LC encoder middleware library for Linux (RTM0AC0000AEAACMZ1SL40C)
+#DISTRO_FEATURES_append = " aaclcenc_lib"
+#DISTRO_FEATURES_append = " aaclcenc_mdw"
+
+# OMX Dolby(R) Digital decoder library for Linux (RTM0AC0000XADD5D30SL40C),
+# Dolby(R) Digital decoder middleware library for Linux (RTM0AC0000ADDD5MZ1SL40C)
+#DISTRO_FEATURES_append = " dddec_lib"
+#DISTRO_FEATURES_append = " dddec_mdw"
+
+# CMS Basic Color Management Middleware for Linux (RTM0AC0000JRCMBCV0SL40C)
+#DISTRO_FEATURES_append = " cmsbcm"
+
+# CMS CMM3 Backlight Control Middleware for Linux (RTM0AC0000JRCMBLC0SL40C)
+#DISTRO_FEATURES_append = " cmsblc"
+
+# CMS VSP2 Dynamic Gamma Correction Middleware for Linux (RTM0AC0000JRCMDGV0SL40C)
+#DISTRO_FEATURES_append = " cmsdgc"
+
+# ISDB-T DTV Software Package for Linux (RTM0RC0000TE020000SL40C)
+#DISTRO_FEATURES_append = " dtv"
+
+# DVD Core-Middleware for Linux (RTM0RC0000XDVDC301SL40C)
+#DISTRO_FEATURES_append = " dvd"
+
+# ADSP Driver for Linux (RCG3AHPDL4001ZDO)
+# ADSP Interface for Linux (RCG3AHIFL4001ZDP)
+# ADSP Framework (RCG3AHFWN0101ZDP)
+#DISTRO_FEATURES_append = " adsp"
+
+# AVB Software Package for Linux
+#DISTRO_FEATURES_append = " avb"
+
+# Linux ICCOM driver (RCG3ZLIDL4001ZNO)
+# Linux ICCOM library (RCG3ZLILL4001ZNO)
+#DISTRO_FEATURES_append = " iccom"
+
+# Evaluation packages
+#DISTRO_FEATURES_append = " use_eva_pkg"
diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/bblayers.conf
new file mode 100644
index 0000000..3b2c068
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/bblayers.conf
@@ -0,0 +1,15 @@
+# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf
+# changes incompatibly
+POKY_BBLAYERS_CONF_VERSION = "2"
+
+BBPATH = "${TOPDIR}"
+BBFILES ?= ""
+
+BBLAYERS ?= " \
+ ${TOPDIR}/../poky/meta \
+ ${TOPDIR}/../poky/meta-poky \
+ ${TOPDIR}/../poky/meta-yocto-bsp \
+ ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \
+ ${TOPDIR}/../meta-openembedded/meta-oe \
+ ${TOPDIR}/../meta-linaro/meta-optee \
+ "
diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-wayland.conf
new file mode 100644
index 0000000..1520bdb
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-wayland.conf
@@ -0,0 +1,267 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "salvator-x"
+
+# This sets the SoC
+# H3: r8a7795, M3: r8a7796
+SOC_FAMILY = "r8a7795"
+#SOC_FAMILY = "r8a7796"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+# - 'package_deb' for debian style deb files
+# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+# - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+# "dbg-pkgs" - add -dbg packages for all installed packages
+# (adds symbol information for debugging/profiling)
+# "dev-pkgs" - add -dev packages for all installed packages
+# (useful if you want to develop against libs in the image)
+# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
+# (useful if you want to run the package test suites)
+# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
+# "tools-debug" - add debugging tools (gdb, strace)
+# "eclipse-debug" - add Eclipse remote debugging support
+# "tools-profile" - add profiling tools (oprofile, lttng, valgrind)
+# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+# "debug-tweaks" - make an image suitable for development
+# e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+# - 'buildstats' collect build statistics
+# - 'image-mklibs' to reduce shared library files size for an image
+# - 'image-prelink' in order to prelink the filesystem image
+# - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+ STOPTASKS,${TMPDIR},1G,100K \
+ STOPTASKS,${DL_DIR},1G,100K \
+ STOPTASKS,${SSTATE_DIR},1G,100K \
+ STOPTASKS,/tmp,100M,100K \
+ ABORT,${TMPDIR},100M,1K \
+ ABORT,${DL_DIR},100M,1K \
+ ABORT,${SSTATE_DIR},100M,1K \
+ ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# for Wayland/Weston weston-laucher
+DISTRO_FEATURES_append = " pam"
+
+# Mask the wayland related to GFX
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
+
+# Mask the gstreamer recipe for MMP
+BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer"
+
+# Add for gstreamer plugins ugly
+LICENSE_FLAGS_WHITELIST = "commercial"
diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local.conf
new file mode 100644
index 0000000..61f5096
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local.conf
@@ -0,0 +1,258 @@
+#
+# This file is your local configuration file and is where all local user settings
+# are placed. The comments in this file give some guide to the options a new user
+# to the system might want to change but pretty much any configuration option can
+# be set in this file. More adventurous users can look at local.conf.extended
+# which contains other examples of configuration which can be placed in this file
+# but new users likely won't need any of them initially.
+#
+# Lines starting with the '#' character are commented out and in some cases the
+# default values are provided as comments to show people example syntax. Enabling
+# the option is a question of removing the # character and making any change to the
+# variable as required.
+
+#
+# Machine Selection
+#
+# You need to select a specific machine to target the build with. There are a selection
+# of emulated machines available which can boot and run in the QEMU emulator:
+#
+#MACHINE ?= "qemuarm"
+#MACHINE ?= "qemuarm64"
+#MACHINE ?= "qemumips"
+#MACHINE ?= "qemumips64"
+#MACHINE ?= "qemuppc"
+#MACHINE ?= "qemux86"
+#MACHINE ?= "qemux86-64"
+#
+# There are also the following hardware board target machines included for
+# demonstration purposes:
+#
+#MACHINE ?= "beaglebone"
+#MACHINE ?= "genericx86"
+#MACHINE ?= "genericx86-64"
+#MACHINE ?= "mpc8315e-rdb"
+#MACHINE ?= "edgerouter"
+#
+# This sets the default machine to be qemux86 if no other machine is selected:
+MACHINE ??= "salvator-x"
+
+# This sets the SoC
+# H3: r8a7795, M3: r8a7796
+SOC_FAMILY = "r8a7795"
+#SOC_FAMILY = "r8a7796"
+
+#
+# Where to place downloads
+#
+# During a first build the system will download many different source code tarballs
+# from various upstream projects. This can take a while, particularly if your network
+# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
+# can preserve this directory to speed up this part of subsequent builds. This directory
+# is safe to share between multiple builds on the same machine too.
+#
+# The default is a downloads directory under TOPDIR which is the build directory.
+#
+#DL_DIR ?= "${TOPDIR}/downloads"
+
+#
+# Where to place shared-state files
+#
+# BitBake has the capability to accelerate builds based on previously built output.
+# This is done using "shared state" files which can be thought of as cache objects
+# and this option determines where those files are placed.
+#
+# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
+# from these files if no changes were made to the configuration. If changes were made
+# to the configuration, only shared state files where the state was still valid would
+# be used (done using checksums).
+#
+# The default is a sstate-cache directory under TOPDIR.
+#
+#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
+
+#
+# Where to place the build output
+#
+# This option specifies where the bulk of the building work should be done and
+# where BitBake should place its temporary files and output. Keep in mind that
+# this includes the extraction and compilation of many applications and the toolchain
+# which can use Gigabytes of hard disk space.
+#
+# The default is a tmp directory under TOPDIR.
+#
+#TMPDIR = "${TOPDIR}/tmp"
+
+#
+# Default policy config
+#
+# The distribution setting controls which policy settings are used as defaults.
+# The default value is fine for general Yocto project use, at least initially.
+# Ultimately when creating custom policy, people will likely end up subclassing
+# these defaults.
+#
+DISTRO ?= "poky"
+# As an example of a subclass there is a "bleeding" edge policy configuration
+# where many versions are set to the absolute latest code from the upstream
+# source control systems. This is just mentioned here as an example, its not
+# useful to most new users.
+# DISTRO ?= "poky-bleeding"
+
+#
+# Package Management configuration
+#
+# This variable lists which packaging formats to enable. Multiple package backends
+# can be enabled at once and the first item listed in the variable will be used
+# to generate the root filesystems.
+# Options are:
+# - 'package_deb' for debian style deb files
+# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
+# - 'package_rpm' for rpm style packages
+# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
+# We default to rpm:
+PACKAGE_CLASSES ?= "package_ipk"
+
+#
+# SDK target architecture
+#
+# This variable specifies the architecture to build SDK items for and means
+# you can build the SDK packages for architectures other than the machine you are
+# running the build on (i.e. building i686 packages on an x86_64 host).
+# Supported values are i686 and x86_64
+#SDKMACHINE ?= "i686"
+
+#
+# Extra image configuration defaults
+#
+# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
+# images. Some of these options are added to certain image types automatically. The
+# variable can contain the following options:
+# "dbg-pkgs" - add -dbg packages for all installed packages
+# (adds symbol information for debugging/profiling)
+# "dev-pkgs" - add -dev packages for all installed packages
+# (useful if you want to develop against libs in the image)
+# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
+# (useful if you want to run the package test suites)
+# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.)
+# "tools-debug" - add debugging tools (gdb, strace)
+# "eclipse-debug" - add Eclipse remote debugging support
+# "tools-profile" - add profiling tools (oprofile, lttng, valgrind)
+# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
+# "debug-tweaks" - make an image suitable for development
+# e.g. ssh root access has a blank password
+# There are other application targets that can be used here too, see
+# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
+# We default to enabling the debugging tweaks.
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
+
+#
+# Additional image features
+#
+# The following is a list of additional classes to use when building images which
+# enable extra features. Some available options which can be included in this variable
+# are:
+# - 'buildstats' collect build statistics
+# - 'image-mklibs' to reduce shared library files size for an image
+# - 'image-prelink' in order to prelink the filesystem image
+# - 'image-swab' to perform host system intrusion detection
+# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
+# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
+# image-prelink disabled for now due to issues with IFUNC symbol relocation
+USER_CLASSES ?= "buildstats image-mklibs"
+
+#
+# Runtime testing of images
+#
+# The build system can test booting virtual machine images under qemu (an emulator)
+# after any root filesystems are created and run tests against those images. To
+# enable this uncomment this line. See classes/testimage(-auto).bbclass for
+# further details.
+#TEST_IMAGE = "1"
+#
+# Interactive shell configuration
+#
+# Under certain circumstances the system may need input from you and to do this it
+# can launch an interactive shell. It needs to do this since the build is
+# multithreaded and needs to be able to handle the case where more than one parallel
+# process may require the user's attention. The default is iterate over the available
+# terminal types to find one that works.
+#
+# Examples of the occasions this may happen are when resolving patches which cannot
+# be applied, to use the devshell or the kernel menuconfig
+#
+# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
+# Note: currently, Konsole support only works for KDE 3.x due to the way
+# newer Konsole versions behave
+#OE_TERMINAL = "auto"
+# By default disable interactive patch resolution (tasks will just fail instead):
+PATCHRESOLVE = "noop"
+
+#
+# Disk Space Monitoring during the build
+#
+# Monitor the disk space during the build. If there is less that 1GB of space or less
+# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
+# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
+# of the build. The reason for this is that running completely out of space can corrupt
+# files and damages the build in ways which may not be easily recoverable.
+# It's necesary to monitor /tmp, if there is no space left the build will fail
+# with very exotic errors.
+BB_DISKMON_DIRS = "\
+ STOPTASKS,${TMPDIR},1G,100K \
+ STOPTASKS,${DL_DIR},1G,100K \
+ STOPTASKS,${SSTATE_DIR},1G,100K \
+ STOPTASKS,/tmp,100M,100K \
+ ABORT,${TMPDIR},100M,1K \
+ ABORT,${DL_DIR},100M,1K \
+ ABORT,${SSTATE_DIR},100M,1K \
+ ABORT,/tmp,10M,1K"
+
+#
+# Shared-state files from other locations
+#
+# As mentioned above, shared state files are prebuilt cache data objects which can
+# used to accelerate build time. This variable can be used to configure the system
+# to search other mirror locations for these objects before it builds the data itself.
+#
+# This can be a filesystem directory, or a remote url such as http or ftp. These
+# would contain the sstate-cache results from previous builds (possibly from other
+# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
+# cache locations to check for the shared objects.
+# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
+# at the end as shown in the examples below. This will be substituted with the
+# correct path within the directory structure.
+#SSTATE_MIRRORS ?= "\
+#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
+#file://.* file:///some/local/dir/sstate/PATH"
+
+
+#
+# Qemu configuration
+#
+# By default qemu will build with a builtin VNC server where graphical output can be
+# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# be built, if you want to use your host's libSDL instead of the minimal libsdl built
+# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-native = " sdl"
+PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
+#ASSUME_PROVIDED += "libsdl-native"
+
+# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
+# track the version of this file when it was generated. This can safely be ignored if
+# this doesn't mean anything to you.
+CONF_VERSION = "1"
+
+# Add systemd configuration
+DISTRO_FEATURES_append = " systemd"
+VIRTUAL-RUNTIME_init_manager = "systemd"
+
+# add the static lib to SDK toolchain
+SDKIMAGE_FEATURES_append = " staticdev-pkgs"
+
+# Disable optee in meta-linaro layer
+BBMASK = "meta-linaro/meta-optee/recipes-security/optee"
+
+# Mask graphic Pkgs
+BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm"
+# Mask MMP recipes
+BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
diff --git a/meta-rcar-gen3/docs/sample/copyscript/copy_evaproprietary_softwares.sh b/meta-rcar-gen3/docs/sample/copyscript/copy_evaproprietary_softwares.sh
new file mode 100755
index 0000000..73b63c6
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/copyscript/copy_evaproprietary_softwares.sh
@@ -0,0 +1,1345 @@
+#!/bin/sh
+
+# Copyright (C) Renesas Electronics Corporation 2016 All rights reserved.
+
+usage()
+{
+cat << EOF
+ usage: `basename $0` [-f] [-d] source-directory
+ -f: fource copy. ignore md5check
+ -d: debug mode
+
+ Ex)
+ `basename $0` -f my_package_dir
+EOF
+}
+
+##### MD5 list #####
+. `dirname $0`/md5list.txt
+
+##### Library List #####
+# Audio Library
+# Please add omx audio library to "_audio_list"
+# Don't use space in xxx_name.
+# audio_list="<software_name>,<package_name>,<copy_file_name> \
+# <software_name>,<package_name>,<copy_file_name> \
+# <software_name>,<package_name>,<copy_file_name>"
+_audio_list="AAC-LC_decoder_lib,EVARTM0AC0000XAAACD30SL40C,RTM0AC0000XAAACD30SL40C.tar.gz \
+ aacPlusV2_decoder_lib,EVARTM0AC0000XAAAPD30SL40C,RTM0AC0000XAAAPD30SL40C.tar.gz \
+ MP3_decoder_lib,EVARTM0AC0000XAMP3D30SL40C,RTM0AC0000XAMP3D30SL40C.tar.gz \
+ WMA_decoder_lib,EVARTM0AC0000XAWMAD30SL40C,RTM0AC0000XAWMAD30SL40C.tar.gz \
+ AAC-LC_encoder_lib,EVARTM0AC0000XAAACE30SL40C,RTM0AC0000XAAACE30SL40C.tar.gz \
+ ALAC_decoder_lib,EVARTM0AC0000XAALAD30SL40C,RTM0AC0000XAALAD30SL40C.tar.gz \
+ FLAC_decoder_lib,EVARTM0AC0000XAFLAD30SL40C,RTM0AC0000XAFLAD30SL40C.tar.gz \
+ Dolby_decoder_lib,EVARTM0AC0000XADD5D30SL40C,RTM0AC0000XADD5D30SL40C.tar.gz"
+
+# Audio M/W Library
+# Please add omx audio library to "_audio_mw_list"
+# Don't use space in xxx_name.
+# audio_mw_list="<software_name>,<package_name>,<copy_file_name> \
+# <software_name>,<package_name>,<copy_file_name> \
+# <software_name>,<package_name>,<copy_file_name>"
+_audio_mw_list="AAC-LC_decoder_M/W,EVARTM0AC0000ADAACMZ1SL40C,RTM0AC0000ADAACMZ1SL40C.tar.gz \
+ aacPlusV2_decoder_M/W,EVARTM0AC0000ADAAPMZ1SL40C,RTM0AC0000ADAAPMZ1SL40C.tar.gz \
+ MP3_decoder_M/W,EVARTM0AC0000ADMP3MZ1SL40C,RTM0AC0000ADMP3MZ1SL40C.tar.gz \
+ WMA_decoder_M/W,EVARTM0AC0000ADWMAMZ1SL40C,RTM0AC0000ADWMAMZ1SL40C.tar.gz \
+ AAC-LC_encoder_M/W,EVARTM0AC0000AEAACMZ1SL40C,RTM0AC0000AEAACMZ1SL40C.tar.gz \
+ DDD_decoder_M/W,EVARTM0AC0000ADDD5MZ1SL40C,RTM0AC0000ADDD5MZ1SL40C.tar.gz"
+
+# Video Decoder Library
+# Please add omx video decoder library to "_video_dec_list"
+# Don't use space in xxx_name.
+# video_dec_list="<software_name>,<package_name>,<copy_file_name> \
+# <software_name>,<package_name>,<copy_file_name> \
+# <software_name>,<package_name>,<copy_file_name>"
+_video_dec_list="H263_decoder,EVARTM0AC0000XV263D30SL40C,EVARTM0AC0000XV263D30SL40C.tar.bz2 \
+ H264_decoder,EVARTM0AC0000XV264D30SL40C,EVARTM0AC0000XV264D30SL40C.tar.bz2 \
+ H265_decoder,EVARTM0AC0000XV265D30SL40C,EVARTM0AC0000XV265D30SL40C.tar.bz2 \
+ MPEG2_decoder,EVARTM0AC0000XVM2VD30SL40C,EVARTM0AC0000XVM2VD30SL40C.tar.bz2 \
+ MPEG4_decoder,EVARTM0AC0000XVM4VD30SL40C,EVARTM0AC0000XVM4VD30SL40C.tar.bz2 \
+ VC1_decoder,EVARTM0AC0000XVVC1D30SL40C,EVARTM0AC0000XVVC1D30SL40C.tar.bz2 \
+ DivX_decoder,EVARTM0AC0000XVDVXD30SL40C,EVARTM0AC0000XVDVXD30SL40C.tar.bz2 \
+ RealVideo_decoder,EVARTM0AC0000XVRLVD30SL40C,EVARTM0AC0000XVRLVD30SL40C.tar.bz2"
+
+# Video Encoder Library
+# Please add omx video encoder library to "_video_enc_list"
+# Don't use space in xxx_name.
+# video_enc_list="<software_name>,<package_name>,<copy_file_name> \
+# <software_name>,<package_name>,<copy_file_name> \
+# <software_name>,<package_name>,<copy_file_name>"
+_video_enc_list="H264_encoder,EVARTM0AC0000XV264E30SL40C,EVARTM0AC0000XV264E30SL40C.tar.bz2"
+
+# Common library packages
+# Don't use space in xxx_name.
+# XXX_list="<software_name>,<package_name>,<copy_file_name> \
+# <software_name>,<package_name>,<copy_file_name> \
+# <software_name>,<package_name>,<copy_file_name>"
+_omx_common_list="omx_common_lib,EVARTM0AC0000XCMCTL30SL40C,EVARTM0AC0000XCMCTL30SL40C.tar.bz2"
+_uvcs_list="uvcs_lib,RCG3VUDRL4001ZDO,RCG3VUDRL4001ZDO.tar.bz2"
+_video_enc_common_list="video_enc_common,EVARTM0AC0000XVCMNE30SL40C,EVARTM0AC0000XVCMNE30SL40C.tar.bz2"
+_video_dec_common_list="video_dec_common,EVARTM0AC0000XVCMND30SL40C,EVARTM0AC0000XVCMND30SL40C.tar.bz2"
+_audio_common_list="audio_common,EVARTM0AC0000XACMND30SL40C,RTM0AC0000XACMND30SL40C.tar.gz"
+
+
+# DTV Library
+# Please add DTV library to "_dtv_list"
+# Don't use space in xxx_name.
+# dtv_xx_list="<software_name>,<package_name>,<copy_file_name>,<MD5_name> \
+# <software_name>,<package_name>,<copy_file_name>,<MD5_name> \
+# <software_name>,<package_name>,<copy_file_name>,<MD5_name>"
+_dtv_km_list="dtv_km,RCG3T001L4001ZDO,Software.tar.gz"
+_dtv_um_list="dtv_lib,RTM0RC0000TE020000SL40C,Software.tar.gz,RTM0RC0000TE020000SL40C1 \
+ dtv_userfunc,RTM0RC0000TE020000SL40C,../Reference/Reference.tar.gz,RTM0RC0000TE020000SL40C2"
+
+# DVD Library
+# Please add DVD library to "_dvd_list"
+# Don't use space in xxx_name.
+# dvd_list="<software_name>,<package_name>,<copy_file_name>,<MD5_name> \
+# <software_name>,<package_name>,<copy_file_name>,<MD5_name> \
+# <software_name>,<package_name>,<copy_file_name>,<MD5_name>"
+_dvd_list="dvd_lib,RTM0RC0000XDVDC301SL40C,Software.tar.gz"
+
+# CMS Library
+# Please add CMS library to "_cms_list"
+# Don't use space in xxx_name.
+# cms_list="<software_name>,<package_name>,<copy_file_name> \
+# <software_name>,<package_name>,<copy_file_name> \
+# <software_name>,<package_name>,<copy_file_name>"
+_cms_list="bcm,RTM0AC0000JRCMBCV0SL40C,RTM0AC0000JRCMBCV0SL40C.tar.gz \
+ blc,RTM0AC0000JRCMBLC0SL40C,RTM0AC0000JRCMBLC0SL40C.tar.gz \
+ dgc,RTM0AC0000JRCMDGV0SL40C,RTM0AC0000JRCMDGV0SL40C.tar.gz"
+
+# ADSP
+# Please add ADSP to "_adsp_list"
+# Don't use space in xxx_name.
+# adsp_xx_list="<software_name>,<package_name>,<copy_file_name> \
+# <software_name>,<package_name>,<copy_file_name> \
+# <software_name>,<package_name>,<copy_file_name>"
+_adsp_um_list="adsp_fw,RCG3AHFWN0101ZDP,RCG3AHFWN0101ZDP.tar.gz \
+ adsp_if,RCG3AHIFL4001ZDP,RCG3AHIFL4001ZDP.tar.gz"
+_adsp_km_list="adsp_driver,RCG3AHPDL4001ZDO,RCG3AHPDL4001ZDO.tar.gz"
+
+# GFX
+# Please add GFX to "_gfx_list"
+# Don't use space in xxx_name.
+# gfx_list="<package_name(user)>,<copy_file_name(user)>,<package_name(kernel)>,<copy_file_name(kernel)> \
+# <package_name(user)>,<copy_file_name(user)>,<package_name(kernel)>,<copy_file_name(kernel)> \
+# <package_name(user)>,<copy_file_name(user)>,<package_name(kernel)>,<copy_file_name(kernel)>"
+_gfx_list="EVARTM0RC7795GLTG0001SL40C,EVA_r8a7795_linux_gsx_binaries_gles3.tar.bz2,RCH3G001L4001ZDO,GSX_KM_H3.tar.bz2 \
+ EVARTM0RC7796GLTG0001SL40C,EVA_r8a7796_linux_gsx_binaries_gles3.tar.bz2,RCM3G001L4001ZDO,GSX_KM_M3.tar.bz2 \
+ INFRTM0RC7795GLTG0001SL40C,INF_r8a7795_linux_gsx_binaries_gles3.tar.bz2,RCH3G001L4001ZDO,GSX_KM_H3.tar.bz2 \
+ INFRTM0RC7796GLTG0001SL40C,INF_r8a7796_linux_gsx_binaries_gles3.tar.bz2,RCM3G001L4001ZDO,GSX_KM_M3.tar.bz2"
+
+# ICCOM
+# Please add ICCOM to "_iccom_list"
+# Don't use space in xxx_name.
+# iccom_xx_list="<software_name>,<package_name>,<copy_file_name>,<MD5_name> \
+# <software_name>,<package_name>,<copy_file_name>,<MD5_name> \
+# <software_name>,<package_name>,<copy_file_name>,<MD5_name>"
+_iccom_km_list="iccom_mfis,RCG3ZLIDL4001ZNO,iccom-mfis.tar.bz2,RCG3ZLIDL4001ZNO1 \
+ iccom_sample,RCG3ZLIDL4001ZNO,iccom-hwspinlock-sample.tar.bz2,RCG3ZLIDL4001ZNO2"
+_iccom_um_list="iccom_lib,RCG3ZLILL4001ZNO,libiccom.tar.bz2,RCG3ZLILL4001ZNO"
+
+# Crypto Packgae list
+# Please add crypto (zip) package name to "_crypto_pkg_list"
+# Don't use space in xxx_name.
+# crypto_pkg_list="<packgae name> <packgae name> <packgae name>"
+_crypto_pkg_list="RTM0AC0000ADDD5MZ1SL40C"
+
+##### static value
+_MODE_ZIP=1
+_MODE_TAR=2
+_MODE_CRYPTO_ZIP=3
+_GFX_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-gles/kernel-module-gles"
+_GFX_UM_INST_DIR="../meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module"
+_UVCS_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-uvcs/kernel-module-uvcs-drv"
+_OMX_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/omx-module/omx-user-module"
+_DTV_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-dtv/files"
+_DTV_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/dtv-module/dtv-user-module"
+_DVD_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/dvd-module/dvd-user-module"
+_CMS_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/cms-module/cms-user-module"
+_ADSP_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-adsp/xtensa-hifi"
+_ADSP_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/adsp-module/files"
+_ICCOM_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-iccom/files"
+_ICCOM_UM_INST_DIR="../meta-rcar-gen3/recipes-connectivity/iccom-module/files"
+
+##### common function
+
+# $1: search file name
+# $2: search directory
+# return global variable
+# _find_filename: find filename
+# _extract_mode: _MODE_ZIP or _MODE_TAR
+func_cmn_find_file()
+{
+# echo "$1"
+# echo "$2"
+ if [ -z "$1" ]; then
+ func_error "ERROR: func_cmn_find_file: empty filename"
+ fi
+
+ if [ -z "$2" ]; then
+ _search_dir=${_src_full}
+ else
+ _search_dir=$2
+ fi
+
+ # search zip file
+# zip_count=`find ${_search_dir} -maxdepth 1 -name "$1*.zip" | wc -l`
+ zip_count=`ls ${_search_dir}/$1*.zip 2>/dev/null | wc -l`
+
+ # search tar file
+# tar_count=`find ${_search_dir} -maxdepth 1 -name "$1*.tar.*" | wc -l`
+ tar_count=`ls ${_search_dir}/$1*.tar.* 2>/dev/null | wc -l`
+
+ # duplicate file check
+ if [ 1 -lt `expr $zip_count + $tar_count` ]; then
+ echo "file1_zip = $zip_count"
+ echo "file1_tar = $tar_count"
+ func_error "ERROR: $1: too many files"
+ fi
+
+ crypto_zip_count=0
+ for i in ${_crypto_pkg_list}
+ do
+ if [ $1 = $i ]; then
+ crypto_zip_count=$zip_count
+ zip_count=0
+ fi
+ done
+
+ # set result
+ if [ 1 = $zip_count ]; then
+ _find_filename=$(ls ${_search_dir}/$1*.zip)
+ _extract_mode=${_MODE_ZIP}
+ elif [ 1 = $tar_count ]; then
+ _find_filename=$(ls ${_search_dir}/$1*.tar.*)
+ _extract_mode=${_MODE_TAR}
+ elif [ 1 = $crypto_zip_count ]; then
+ _find_filename=$(ls ${_search_dir}/$1*.zip)
+ _extract_mode=${_MODE_CRYPTO_ZIP}
+ else
+ _find_filename=""
+ fi
+}
+
+# $1: Mode
+# $2: archive file name
+func_cmn_extract_archive()
+{
+ case $1 in
+ $_MODE_ZIP)
+# echo "Zip mode"
+ unzip -oq $2
+ ;;
+ $_MODE_TAR)
+# echo "Tar mode"
+ tar xf $2
+ ;;
+ $_MODE_CRYPTO_ZIP)
+# echo "Crypto Zip mode"
+ unzip -oq $2
+ top_dir=$(basename $2)
+ top_dir=${top_dir%.*}
+ cd ${top_dir}
+ unzip -oq *.zip
+ if [ $? -gt 0 ]; then
+ func_error "ERROR: FAILED ZIP PASSWORD"
+ fi
+ cd ${TMPWORK}
+ ;;
+ *)
+ func_error "ERROR: func_cmn_extract_archive: mode error."
+ exit 1
+ ;;
+ esac
+}
+
+# $1: set target filename.
+# $2: set MD5 expectation value.
+func_cmn_md5_check()
+{
+ _md5_func_param_filename=$1
+ _md5_func_param_expectation=$2
+ if [ ! -e ${_md5_func_param_filename} ]; then
+ func_error "func_cmn_md5_check : ERROR ${_md5_func_param_filename} not found."
+ fi
+
+ _calc_md5=$(md5sum ${_md5_func_param_filename} | cut -d " " -f1)
+
+ if [ -n "${_no_md5check}" ] || [ -z ${_md5_func_param_expectation} ]; then
+ echo "Skip MD5 : `basename ${_md5_func_param_filename}`"
+ return
+ fi
+
+ if [ -n "${_debug}" ]; then
+ echo "MD5 target file = ${_md5_func_param_filename}"
+ echo "calc_md5 = ${_calc_md5}"
+ echo "expect_value = ${_md5_func_param_expectation}"
+ fi
+
+ if [ ${_calc_md5} = ${_md5_func_param_expectation} ]; then
+ echo "MD5 OK : `basename ${_md5_func_param_filename}`"
+ else
+ echo "calc_md5 = ${_calc_md5}"
+ echo "expect_value = ${_md5_func_param_expectation}"
+ func_error "MD5 ERROR : ${_md5_func_param_filename}"
+ fi
+}
+
+##### Error function
+# $1: error message
+func_error()
+{
+ echo "$1"
+ # cleanup temp directory.
+ func_clean_tempdir
+ exit 1
+}
+
+##### cleanup temp directory
+func_clean_tempdir()
+{
+ echo "cleanup temp directory"
+ rm -rf ${TMPWORK}
+}
+
+##### Template function for Single package
+
+# $1: package name
+# $2: search target filename
+# $3: search directory (full path)
+# return
+# _find_filename : the found file (full path)
+# _extract_top_dir_name
+func_search_file_in_package()
+{
+ # search package file
+ func_cmn_find_file $1 $3
+ if [ -n "${_debug}" ]; then
+ echo ""
+ echo "FileName = ${_find_filename}"
+ echo "Mode = ${_extract_mode}"
+ fi
+
+ if [ -z "${_find_filename}" ]; then
+ return
+ fi
+
+ # extract
+ func_cmn_extract_archive ${_extract_mode} "${_find_filename}"
+
+ # Get directory name
+ # {PATH}/Package_Version.tar.gz or XXXX.zip --> Package_Version
+ top_dir=$(basename ${_find_filename})
+ top_dir=${top_dir%.*}
+
+ # search file
+ num=`find ${top_dir} -name $2 | wc -l`
+ if [ ${num} -eq 1 ]; then
+ _find_filename=`find ${top_dir} -name $2`
+ else
+ # same filename exists.
+ _find_filename=`find ${top_dir} -name $2 | grep Software`
+ fi
+
+ # set mode
+ if [ `echo ${_find_filename} | grep '\.'zip` ]; then
+ _extract_mode=${_MODE_ZIP}
+ else
+ _extract_mode=${_MODE_TAR}
+ fi
+
+ # set return value
+ _extract_top_dir_name=${top_dir}
+}
+
+# $1: package name
+# $2: copy filename (md5 target)
+# $3: expect MD5 value
+# $4: search directory (full path)
+# return
+# _find_file_name
+# _extract_top_dir_name
+func_search_and_md5check()
+{
+ # search package file
+ func_cmn_find_file $1 $4
+ if [ -n "${_debug}" ]; then
+ echo ""
+ echo "FileName = ${_find_filename}"
+ echo "Mode = ${_extract_mode}"
+ fi
+
+ if [ -z "${_find_filename}" ]; then
+ return
+ fi
+
+ # extract
+ func_cmn_extract_archive ${_extract_mode} "${_find_filename}"
+
+ # MD5
+ # Get directory name
+ # {PATH}/Package_Version.tar.gz or XXXX.zip --> Package_Version
+ top_dir=$(basename ${_find_filename})
+ top_dir=${top_dir%.*}
+
+ # call func_cmn_md5_check
+# func_cmn_md5_check "${top_dir}/$1/Software/$2" "$3"
+
+ # set return value
+ _extract_top_dir_name=${top_dir}
+}
+
+##### Template function for Group package
+# $1: group package name
+# $2: single package name
+# $3: copy filename (md5 target)
+# $4: expect MD5 value
+# $5: search directory (full path)
+# return
+# _find_file_name
+# _extract_top_dir_name
+#
+# NOTE) This function support level1 packaging. "grp pkg in grp pkg" dose note support.
+func_search_and_md5check_grp()
+{
+ # search group package @SRCDIR
+ func_cmn_find_file $1 $5
+ if [ -n "${_debug}" ]; then
+ echo "search group package"
+ echo "FileName = ${_find_filename}"
+ echo "Mode = ${_extract_mode}"
+ echo ""
+ fi
+
+ if [ -z "${_find_filename}" ]; then
+ return
+ fi
+
+ # extract group package @TMPWORK
+ func_cmn_extract_archive ${_extract_mode} "${_find_filename}"
+
+ cd ${_find_filename}
+ # check group pachage structure
+ # <Package name>_<version>/Package_Info.txt
+ top_dir=$(basename ${_find_filename})
+ top_dir=${top_dir%.*}
+
+ if [ ! -e ${top_dir}/Package_Info.txt ]; then
+ echo "grp package = $1"
+ echo "single package = $2"
+ func_error "ERROR: Package_Info.txt not found in Group package."
+ fi
+
+ # search single package @TMPWORK/TOPDIR/<Group Package name>/
+ func_cmn_find_file $2 "${TMPWORK}/${top_dir}/$1"
+ if [ -n "${_debug}" ]; then
+ echo "search single package"
+ echo "FileName = ${_find_filename}"
+ echo "Mode = ${_extract_mode}"
+ echo ""
+ fi
+
+ if [ -z "${_find_filename}" ]; then
+ return
+ fi
+
+ # mv <single package> TMPWORK/.
+ mv ${_find_filename} ${TMPWORK}/.
+
+ # delete group package
+ rm -rf ${TMPWORK}/${top_dir}
+
+ # call search and md5check @TMPWORK
+ func_search_and_md5check $2 $3 $4 ${TMPWORK}
+}
+
+##### File search and MD5check for Package list
+# $1: package list
+# $2: rigid flag (1: true, other: false)
+#
+# return
+# 1: [Success] One or more files were found.
+# 0: [Fail] File not found
+#
+# package list format
+# list ="<software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name>"
+#
+# Note) Don't use space in xxx_name.
+# Note) md5_variable_name is defined in md5list.txt.
+# Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO
+# It is omissible. The default is "_MD5_<package_name>".
+func_list_search_and_md5check ()
+{
+ find_flag=0
+
+ for i in $1
+ do
+ sw_name=`echo $i | cut -d "," -f 1`
+ pkg_name=`echo $i | cut -d "," -f 2`
+ copyfile_name=`echo $i | cut -d "," -f 3`
+ md5_val=`echo $i | cut -d "," -f 4`
+
+ # <MD5_name> is empty. Default MD5 name is "_MD5_<pkg_name>"
+ if [ -z "${md5_val}" ]; then
+ md5_val=`eval echo '$_MD5_'${pkg_name}`
+ else
+ md5_val=`eval echo '$_MD5_'${md5_val}`
+ fi
+
+ if [ -n "${_debug}" ]; then
+ echo ""
+ echo "sw_name = $sw_name"
+ echo "pkg_name = $pkg_name"
+ echo "copyfile_name = $copyfile_name"
+ echo "md5_val = $md5_val"
+ fi
+
+ func_search_and_md5check "${pkg_name}" "${copyfile_name}" "${md5_val}" "${_src_full}"
+ if [ -z "${_find_filename}" ]; then
+ echo "${sw_name} not found!"
+ # rigid flag = TRUE. Not found = ERROR
+ if [ "X$2" = "X1" ]; then
+ return 0
+ fi
+ else
+ find_flag=1
+ fi
+ done
+
+ return ${find_flag}
+}
+
+##### File search and install (without MD5check) for Package list
+#
+# $1: package list
+# $2: install directory
+#
+# return
+# 1: [Success] One or more files were installed.
+# 0: [Fail] File not found
+#
+# package list format
+# list ="<software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name>"
+#
+# Note) Don't use space in xxx_name.
+# Note) md5_variable_name is defined in md5list.txt.
+# Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO
+# It is omissible. The default is "_MD5_<package_name>".
+func_list_search_and_install_wo_md5check()
+{
+ find_flag=0
+
+ for i in $1
+ do
+ sw_name=`echo $i | cut -d "," -f 1`
+ pkg_name=`echo $i | cut -d "," -f 2`
+ copyfile_name=`echo $i | cut -d "," -f 3`
+ md5_val=`echo $i | cut -d "," -f 4`
+
+ # <MD5_name> is empty. Default MD5 name is "_MD5_<pkg_name>"
+ if [ -z "${md5_val}" ]; then
+ md5_val=`eval echo '$_MD5_'$pkg_name`
+ else
+ md5_val=`eval echo '$_MD5_'${md5_val}`
+ fi
+
+ copyfile_name=$(basename ${copyfile_name})
+
+ if [ -n "${_debug}" ]; then
+ echo ""
+ echo "sw_name = $sw_name"
+ echo "pkg_name = $pkg_name"
+ echo "copyfile_name = $copyfile_name"
+ echo "md5_val = $md5_val"
+ fi
+
+ # file search
+ func_search_file_in_package "${pkg_name}" "${copyfile_name}" "${_src_full}"
+ if [ -z "${_find_filename}" ]; then
+ echo "${sw_name} not found!"
+ else
+ find_flag=1
+
+ # install
+ install -d $2
+ install -m 0644 ${_find_filename} $2
+ echo "Installed $sw_name"
+ echo " : ${pkg_name}"
+ fi
+ done
+
+ return ${find_flag}
+}
+
+##### File search and install for Package list
+#
+# $1: package list
+# $2: install directory
+#
+# return
+# 1: [Success] One or more files were installed.
+# 0: [Fail] File not found
+#
+# package list format
+# list ="<software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name>"
+#
+# Note) Don't use space in xxx_name.
+# Note) md5_variable_name is defined in md5list.txt.
+# Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO
+# It is omissible. The default is "_MD5_<package_name>".
+func_list_search_and_install()
+{
+ find_flag=0
+
+ for i in $1
+ do
+ sw_name=`echo $i | cut -d "," -f 1`
+ pkg_name=`echo $i | cut -d "," -f 2`
+ copyfile_name=`echo $i | cut -d "," -f 3`
+ md5_val=`echo $i | cut -d "," -f 4`
+
+ # <MD5_name> is empty. Default MD5 name is "_MD5_<pkg_name>"
+ if [ -z "${md5_val}" ]; then
+ md5_val=`eval echo '$_MD5_'$pkg_name`
+ else
+ md5_val=`eval echo '$_MD5_'${md5_val}`
+ fi
+
+ if [ -n "${_debug}" ]; then
+ echo ""
+ echo "sw_name = $sw_name"
+ echo "pkg_name = $pkg_name"
+ echo "copyfile_name = $copyfile_name"
+ echo "md5_val = $md5_val"
+ fi
+
+ # seach & MD5 check
+ func_search_and_md5check "${pkg_name}" "${copyfile_name}" "${md5_val}" "${_src_full}"
+ if [ -z "${_find_filename}" ]; then
+ echo "${sw_name} not found!"
+ else
+ find_flag=1
+
+ # Get directory name
+ # _find_filename = pkg file (full path). It is not copyfile.
+ top_dir=$(basename ${_find_filename})
+ top_dir=${top_dir%.*}
+
+ # install
+ install -d $2
+ install -m 0644 ${top_dir}/${pkg_name}/Software/${copyfile_name} $2
+ echo "Installed $sw_name"
+ echo " : ${pkg_name}"
+ fi
+ done
+
+ return ${find_flag}
+}
+
+##### Package function
+
+# For 3D graphics packages
+func_gfx()
+{
+ echo ""
+ echo "Copying for Graphic Packages"
+
+ copy_flag=0
+
+ for i in ${_gfx_list}
+ do
+ user_pkg_name=`echo $i | cut -d "," -f 1`
+ user_copyfile_name=`echo $i | cut -d "," -f 2`
+ user_md5_val=`eval echo '$_MD5_'${user_pkg_name}`
+ kern_pkg_name=`echo $i | cut -d "," -f 3`
+ kern_copyfile_name=`echo $i | cut -d "," -f 4`
+ kern_md5_val=`eval echo '$_MD5_'${kern_pkg_name}`
+
+ if [ -n "${_debug}" ]; then
+ echo ""
+ echo "user_pkg_name = ${user_pkg_name}"
+ echo "user_copyfile_name= ${user_copyfile_name}"
+ echo "user_md5_val = ${user_md5_val}"
+ echo "kern_pkg_name = ${kern_pkg_name}"
+ echo "kern_copyfile_name= ${kern_copyfile_name}"
+ echo "kern_md5_val = ${kern_md5_val}"
+ fi
+
+ # user module (file1)
+ func_search_and_md5check "${user_pkg_name}" "${user_copyfile_name}" "${user_md5_val}" "${_src_full}"
+
+ if [ -z "${_find_filename}" ]; then
+ echo "${user_pkg_name} not found!"
+ continue
+ fi
+
+ file1_top_dir=${_extract_top_dir_name}
+ echo "file1 top : ${file1_top_dir}"
+
+ # kernel module (file2)
+ func_search_and_md5check "${kern_pkg_name}" "${kern_copyfile_name}" "${kern_md5_val}" "${_src_full}"
+
+ # file1 exist, but file2 not exist
+ if [ -z "${_find_filename}" ]; then
+ func_error "ERROR: func_gfx: package file for Graphic is incomplete."
+ fi
+
+ file2_top_dir=${_extract_top_dir_name}
+ echo "file2 top : ${file2_top_dir}"
+
+ # Finally copy is performed
+ copy_flag=1
+ install -d ${_GFX_UM_INST_DIR}
+ install -m 0644 ${file1_top_dir}/${user_pkg_name}/Software/${user_copyfile_name} ${_GFX_UM_INST_DIR}/`echo ${user_copyfile_name} | cut -b 5-200`
+ install -d ${_GFX_KM_INST_DIR}
+ install -m 0644 ${file2_top_dir}/${kern_pkg_name}/Software/${kern_copyfile_name} ${_GFX_KM_INST_DIR}
+ echo "Installed GFX package"
+ echo " : ${user_pkg_name}"
+ echo " : ${kern_pkg_name}"
+ echo ""
+ done
+
+ if [ ${copy_flag} -eq 0 ]; then
+ return
+ fi
+
+ echo ""
+ echo "Packages for GFX module were found and copied."
+ echo /=======================================================/
+}
+
+##### For Multi Media
+
+# For Audio library copy
+#
+# Global
+# _audio_list: audio library list
+# Return
+# 0: Not found
+# 1: Success
+func_audio_lib()
+{
+ # MD5 check: OMX Media Component Audio Common Library for Linux
+ func_list_search_and_md5check "${_audio_common_list}" "1"
+ if [ $? -eq 0 ]; then
+ echo "Audio Common Library not found!"
+ echo ""
+ return 0
+ fi
+
+ # MD5 check: audio library.
+ func_list_search_and_md5check "${_audio_list}"
+ if [ $? -eq 0 ]; then
+ # library not found.
+ echo ""
+ echo "Audio library not found."
+ return 0
+ fi
+
+ # Add audio common library to list
+ _audio_list="${_audio_common_list} ${_audio_list}"
+
+ # Install omx common lib (if not installed)
+ func_install_omx_common
+
+ # Install Audio library packages
+ func_list_search_and_install_wo_md5check "${_audio_list}" "${_OMX_UM_INST_DIR}"
+ _audio_common_install=1
+
+ return 1
+}
+
+# For Audio library
+func_audio()
+{
+ echo ""
+ echo "Copying for Audio Common Packages"
+
+ _audio_common_install=0
+
+ # Audio requires OMX common library
+ if [ ${_omx_common_install} -eq 0 ]; then
+ # MD5 check (rigid flag=TRUE)
+ func_list_search_and_md5check "${_omx_common_list}" "1"
+ if [ $? -eq 0 ]; then
+ echo "OMX Common Library not found!"
+ echo ""
+ return
+ fi
+ else
+ echo "OMX Common Library already installed"
+ fi
+
+ # Audio Library
+ func_audio_lib
+ if [ $? -eq 0 ]; then
+ echo ""
+ echo "Skip Audio Packages"
+ echo ""
+ return
+ fi
+
+ echo ""
+ echo "Packages for Audio module were found and copied."
+ echo /=======================================================/
+}
+
+# For Audio M/W
+# Global
+# _audio_mw_list: audio M/W library list
+# Return
+# 0: Not found
+# 1: Success
+func_audio_mw()
+{
+ echo ""
+ echo "Copying for Audio M/W Packages"
+
+ # MD5 check
+ func_list_search_and_md5check "${_audio_mw_list}"
+ if [ $? -eq 0 ]; then
+ # library not found.
+ echo ""
+ echo "Packages for Audio M/W module were not found."
+ return 0
+ fi
+
+ # Install Audio M/W library packages
+ func_list_search_and_install_wo_md5check "${_audio_mw_list}" "${_OMX_UM_INST_DIR}"
+
+ echo ""
+ echo "Packages for Audio M/W module were found and copied."
+ echo /=======================================================/
+
+ return 1
+}
+
+# install OMX common library
+func_install_omx_common()
+{
+ if [ ${_omx_common_install} -eq 0 ]; then
+ echo ""
+ echo "Install for OMX Common Packages"
+ func_list_search_and_install_wo_md5check "${_omx_common_list}" "${_OMX_UM_INST_DIR}"
+ _omx_common_install=1
+ fi
+}
+
+# install uvcs driver
+func_install_uvcs()
+{
+ if [ ${_uvcs_install} -eq 0 ]; then
+ echo ""
+ echo "Installed UVCS driver"
+ func_list_search_and_install_wo_md5check "${_uvcs_list}" "${_UVCS_INST_DIR}"
+ _uvcs_install=1
+ fi
+}
+
+# search & MD5 check for OMX Video Decoder library
+# Global
+# _video_dec_list: video decoder list
+# Return
+# 0: Not found
+# 1: Success
+func_video_decoder_lib()
+{
+ echo ""
+ echo "Copying for Video Decoder Library Packages"
+
+ # MD5 check: Decoder Common Library (rigid flag=TRUE)
+ func_list_search_and_md5check "${_video_dec_common_list}" "1"
+ if [ $? -eq 0 ]; then
+ echo "OMX Video Decoder Common Library not found!"
+ return 0
+ fi
+
+ # MD5 check: Video Decoder Library
+ func_list_search_and_md5check "${_video_dec_list}"
+ if [ $? -eq 0 ]; then
+ # library not found.
+ return 0
+ fi
+
+ # install OMX common lib (if not installed)
+ func_install_omx_common
+
+ # install UVCS driver (if not installed)
+ func_install_uvcs
+
+ # Add video decoder common lib to list
+ _video_dec_list="${_video_dec_common_list} ${_video_dec_list}"
+
+ # install searched library
+ func_list_search_and_install_wo_md5check "${_video_dec_list}" "${_OMX_UM_INST_DIR}"
+ _video_decoder_common_install=1
+
+ return 1
+}
+
+# search & MD5 check for OMX Video Encoder library
+# Global
+# _video_enc_list: video encoder list
+# Return
+# 0: Not found
+# 1: Success
+func_video_encoder_lib()
+{
+ echo ""
+ echo "Copying for Video Encoder Library Packages"
+
+
+ # MD5 check Encoder Common Library (rigid flag=TRUE)
+ func_list_search_and_md5check "${_video_enc_common_list}" "1"
+ if [ $? -eq 0 ]; then
+ echo "OMX Video Encoder Common Library not found!"
+ return 0
+ fi
+ _video_encoder_common_install=0
+
+ # Video Encoder Library
+ # MD5 check
+ func_list_search_and_md5check "${_video_enc_list}"
+ if [ $? -eq 0 ]; then
+ # library not found.
+ return 0
+ fi
+
+ # install common lib (if not installed)
+ func_install_omx_common
+
+ # install UVCS driver (if not installed)
+ func_install_uvcs
+
+ # Add Video encoder common library to list
+ _video_enc_list="${_video_enc_common_list} ${_video_enc_list}"
+
+ # install searched library
+ func_list_search_and_install_wo_md5check "${_video_enc_list}" "${_OMX_UM_INST_DIR}"
+ _video_encoder_common_install=1
+
+ return 1
+}
+
+# For Video decoder
+# Global
+# _video_dec_list: video decoder list
+# Return
+# 0: Not found
+# 1: Success
+func_video_decoder()
+{
+ echo ""
+ echo "Copying for Video Decoder Packages"
+
+ # OMX Common library
+ if [ ${_omx_common_install} -eq 0 ]; then
+ # MD5 check (rigid flag=TRUE)
+ func_list_search_and_md5check "${_omx_common_list}" "1"
+ if [ $? -eq 0 ]; then
+ echo "OMX Common Library not found!"
+ echo ""
+ return
+ fi
+ else
+ echo "OMX Common Library already installed"
+ fi
+
+ # UVCS driver
+ if [ ${_uvcs_install} -eq 0 ]; then
+ # MD5 check (rigid flag=TRUE)
+ func_list_search_and_md5check "${_uvcs_list}" "1"
+ if [ $? -eq 0 ]; then
+ echo "UVCS driver not found!"
+ echo ""
+ return
+ fi
+ else
+ echo "UVCS driver already installed"
+ fi
+
+ # OMX Decoder
+ # Decoder common Lib
+ func_video_decoder_lib
+ if [ $? -eq 0 ]; then
+ echo ""
+ echo "Skip Video Decoder Packages"
+ echo ""
+ return
+ fi
+
+ echo ""
+ echo "Packages for video decoder module were found and copied."
+ echo /=======================================================/
+}
+
+# For Video encoder
+func_video_encoder()
+{
+ echo ""
+ echo "Copying for Video Encoder Packages"
+
+ # OMX Common library
+ if [ ${_omx_common_install} -eq 0 ]; then
+ # MD5 check (rigid flag=TRUE)
+ func_list_search_and_md5check "${_omx_common_list}" "1"
+ if [ $? -eq 0 ]; then
+ echo "OMX Common Library not found!"
+ echo ""
+ return
+ fi
+ else
+ echo "OMX Common Library already installed"
+ fi
+
+ # UVCS driver
+ if [ ${_uvcs_install} -eq 0 ]; then
+ # MD5 check (rigid flag=TRUE)
+ func_list_search_and_md5check "${_uvcs_list}" "1"
+ if [ $? -eq 0 ]; then
+ echo "UVCS driver not found!"
+ echo ""
+ return
+ fi
+ else
+ echo "UVCS driver already installed"
+ fi
+
+ # OMX Encoder
+ # Encoder common Lib
+ func_video_encoder_lib
+ if [ $? -eq 0 ]; then
+ echo ""
+ echo "Skip Video Encoder Packages"
+ echo ""
+ return
+ fi
+
+ echo ""
+ echo "Packages for video encoder module were found and copied."
+ echo /=======================================================/
+}
+
+# For DTV kernel module
+func_dtv_kern()
+{
+ echo ""
+ echo "Copying for DTV kernel module"
+
+ _dtv_kern_install=0
+
+ func_list_search_and_md5check "${_dtv_km_list}"
+ if [ $? -eq 0 ]; then
+ # library not found.
+ echo ""
+ echo "DTV kernel library not found!"
+ return
+ fi
+
+ pkg_name=`echo ${_dtv_km_list} | cut -d "," -f 2`
+ copyfile_name=`echo ${_dtv_km_list} | cut -d "," -f 3`
+
+ # extract --> archive --> copied
+ echo "Installed DTV kernel modules"
+ func_search_file_in_package "${pkg_name}" "${copyfile_name}" "${_src_full}"
+ func_cmn_extract_archive "${_extract_mode}" "${_find_filename}"
+
+ dtv_driver_list="ssp_drv scu_src_drv tsif_drv tddmac_drv"
+ for i in ${dtv_driver_list}
+ do
+ tar cfz $i.tar.gz $i
+ install -d ${_DTV_KM_INST_DIR}
+ install -m 644 $i.tar.gz ${_DTV_KM_INST_DIR}
+ echo " : $i.tar.gz"
+ done
+
+ _dtv_kern_install=1
+
+ echo ""
+ echo "DTV kernel module were found and copied."
+ echo /=======================================================/
+}
+
+# For DTV lib
+func_dtv_lib()
+{
+ echo ""
+ echo "Copying for DTV Library Packages"
+
+ # DTV kernel modules
+ if [ ${_dtv_kern_install} -eq 0 ]; then
+ echo "DTV kernel module not found!"
+ echo "Skip DTV Package"
+ echo ""
+ return
+ fi
+
+ # MD5 check (rigid flag=TRUE)
+ func_list_search_and_md5check "${_dtv_um_list}" "1"
+ if [ $? -eq 0 ]; then
+ # library not found.
+ echo ""
+ echo "DTV library not found"
+ return
+ fi
+
+ # install
+ func_list_search_and_install_wo_md5check "${_dtv_um_list}" "${_DTV_UM_INST_DIR}"
+
+ echo ""
+ echo "DTV Package were found and copied."
+ echo /=======================================================/
+}
+
+# For DVD lib
+func_dvd_lib()
+{
+ echo ""
+ echo "Copying for DVD Library Packages"
+
+ # MD5 check (rigid flag=TRUE)
+ func_list_search_and_md5check "${_dvd_list}" "1"
+ if [ $? -eq 0 ]; then
+ # library not found.
+ echo ""
+ echo "DVD library not found"
+ return
+ fi
+
+ # install searched library
+ func_list_search_and_install_wo_md5check "${_dvd_list}" "${_DVD_UM_INST_DIR}"
+
+ echo ""
+ echo "DVD Package were found and copied."
+ echo /=======================================================/
+}
+
+# For DTV/DVD main routine
+func_dtv_dvd()
+{
+ echo ""
+ echo "Copying for DTV/DVD Packages"
+
+ # DTV/DVD requires OMX Video Decoder
+ if [ ${_video_decoder_common_install} -eq 0 ]; then
+ echo "Video Decoder Library not found!"
+ echo "Skip DTV/DVD Package"
+ echo ""
+ return
+ fi
+
+ # DTV requires Audio Decoder
+ if [ ${_audio_common_install} -eq 0 ]; then
+ echo "Audio Common Library not found!"
+ echo "Skip DTV Package"
+ echo ""
+ else
+ # DTV package
+ func_dtv_kern
+ func_dtv_lib
+ fi
+
+ # DVD package
+ func_dvd_lib
+}
+
+# For CMS main routine
+func_cms()
+{
+ echo ""
+ echo "Copying for CMS Packages"
+
+ copy_flag=0
+
+ # MD5 check
+ func_list_search_and_md5check "${_cms_list}"
+ if [ $? -eq 0 ]; then
+ # library not found.
+ echo "Skip CMS package"
+ echo ""
+ return
+ fi
+
+ # Install library
+ func_list_search_and_install_wo_md5check "${_cms_list}" "${_CMS_UM_INST_DIR}"
+
+ echo ""
+ echo "Packages for CMS were found and copied."
+ echo /=======================================================/
+}
+
+# For ADSP main routine
+func_adsp()
+{
+ echo ""
+ echo "Copying for ADSP Packages"
+
+ # MD5 check (rigid flag = TRUE)
+ # In ADSP, all files are necesarry
+ func_list_search_and_md5check "${_adsp_km_list}" "1"
+ if [ $? -eq 0 ]; then
+ # library not found.
+ echo "Skip ADSP Package"
+ echo ""
+ return
+ fi
+
+ func_list_search_and_md5check "${_adsp_um_list}" "1"
+ if [ $? -eq 0 ]; then
+ # library not found.
+ echo "Skip ADSP Package"
+ echo ""
+ return
+ fi
+
+ # Install kernel module
+ func_list_search_and_install_wo_md5check "${_adsp_km_list}" "${_ADSP_KM_INST_DIR}"
+
+ # Install user module
+ func_list_search_and_install_wo_md5check "${_adsp_um_list}" "${_ADSP_UM_INST_DIR}"
+
+ echo ""
+ echo "Packages for ADSP were found and copied."
+ echo /=======================================================/
+}
+
+# For ICCOM main routine
+func_iccom()
+{
+ echo ""
+ echo "Copying for ICCOM Packages"
+
+ # MD5 check (rigid flag = TRUE)
+ # In ICCOM, all files are necesarry
+ func_list_search_and_md5check "${_iccom_km_list}" "1"
+ if [ $? -eq 0 ]; then
+ # library not found.
+ echo "Skip ICCOM Package"
+ echo ""
+ return
+ fi
+
+ func_list_search_and_md5check "${_iccom_um_list}" "1"
+ if [ $? -eq 0 ]; then
+ # library not found.
+ echo "Skip ICCOM Package"
+ echo ""
+ return
+ fi
+
+ # Install kernel module
+ func_list_search_and_install_wo_md5check "${_iccom_km_list}" "${_ICCOM_KM_INST_DIR}"
+
+ # Install user module
+ func_list_search_and_install_wo_md5check "${_iccom_um_list}" "${_ICCOM_UM_INST_DIR}"
+
+ echo ""
+ echo "Packages for ICCOM were found and copied."
+ echo /=======================================================/
+}
+
+################################
+# Copy Script Main routine
+################################
+echo "Copyscript for R-Car Gen3"
+echo
+#### 1) Checking current directory
+if [ ! -d meta-rcar-gen3 ]; then
+ echo "ERROR: Please extract meta-renesas and cd to it, before execute $0"
+ exit 1
+fi
+
+#### 2) Checking Arguments
+if [ "X$1" = "X" ]; then
+ usage
+ exit 1
+fi
+
+while [ $# -gt 0 ] ; do
+ case "$1" in
+ -f|--force)
+ _no_md5check=1
+ ;;
+ -d|--debug)
+ _debug=1
+ ;;
+ *)
+ _src_dirname=$(basename $1)
+ _src_path=$(cd $(dirname $1) && pwd)
+ _src_full=${_src_path}/${_src_dirname}
+ ;;
+ esac
+ shift
+done
+
+#### 3) Checking ClickThrough present
+if [ ! -f ${_src_full}/R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-*.tar.gz ]; then
+ echo "R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-*.tar.gz not found!"
+ usage
+ exit 1
+fi
+if [ ! -f ${_src_full}/R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-*.tar.gz ]; then
+ echo "R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-*.tar.gz not found!"
+ usage
+ exit 1
+fi
+
+tar -C ${_src_full} -zxf ${_src_full}/R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-*.tar.gz --strip-components 2
+tar -C ${_src_full} -zxf ${_src_full}/R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-*.tar.gz --strip-components 2
+
+# source directory check
+if [ ! -d ${_src_path}/${_src_dirname} ]; then
+ echo "${_src_path}/${_src_dirname} not found."
+ usage
+ exit 1
+fi
+
+if [ -n "${_debug}" ]; then
+ echo "src = ${_src_dirname}"
+ echo "src_path = ${_src_path}"
+ echo "src_full = ${_src_full}"
+ echo "no_md5check = ${_no_md5check}"
+ echo ""
+fi
+
+##### 3) create temp directory
+TMPWORK=${PWD}/CP_SCRIPT_TEMP
+if [ -d ${TMPWORK} ]; then
+ echo "ERROR: Work directory already exist."
+ exit 1
+fi
+install -d -m 700 ${TMPWORK}
+cd ${TMPWORK}
+
+##### 4) copy
+# initialize flag
+_omx_common_install=0
+_uvcs_install=0
+_audio_common_install=0
+_video_decoder_common_install=0
+_video_encoder_common_install=0
+_dtv_kern_install=0
+
+func_gfx
+func_audio
+func_audio_mw
+func_video_decoder
+func_video_encoder
+func_dtv_dvd
+func_cms
+func_adsp
+func_iccom
+
+##### 5) cleanup temp directory
+func_clean_tempdir
+
+##### End
+echo "Complete copying !"
diff --git a/meta-rcar-gen3/docs/sample/copyscript/copy_proprietary_softwares.sh b/meta-rcar-gen3/docs/sample/copyscript/copy_proprietary_softwares.sh
new file mode 100755
index 0000000..3a100e1
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/copyscript/copy_proprietary_softwares.sh
@@ -0,0 +1,1330 @@
+#!/bin/sh
+
+# Copyright (C) Renesas Electronics Corporation 2015 All rights reserved.
+
+usage()
+{
+cat << EOF
+ usage: `basename $0` [-f] [-d] source-directory
+ -f: fource copy. ignore md5check
+ -d: debug mode
+
+ Ex)
+ `basename $0` -f my_package_dir
+EOF
+}
+
+##### MD5 list #####
+. `dirname $0`/md5list.txt
+
+##### Library List #####
+# Audio Library
+# Please add omx audio library to "_audio_list"
+# Don't use space in xxx_name.
+# audio_list="<software_name>,<package_name>,<copy_file_name> \
+# <software_name>,<package_name>,<copy_file_name> \
+# <software_name>,<package_name>,<copy_file_name>"
+_audio_list="AAC-LC_decoder_lib,RTM0AC0000XAAACD30SL40C,RTM0AC0000XAAACD30SL40C.tar.gz \
+ aacPlusV2_decoder_lib,RTM0AC0000XAAAPD30SL40C,RTM0AC0000XAAAPD30SL40C.tar.gz \
+ MP3_decoder_lib,RTM0AC0000XAMP3D30SL40C,RTM0AC0000XAMP3D30SL40C.tar.gz \
+ WMA_decoder_lib,RTM0AC0000XAWMAD30SL40C,RTM0AC0000XAWMAD30SL40C.tar.gz \
+ AAC-LC_encoder_lib,RTM0AC0000XAAACE30SL40C,RTM0AC0000XAAACE30SL40C.tar.gz \
+ ALAC_decoder_lib,RTM0AC0000XAALAD30SL40C,RTM0AC0000XAALAD30SL40C.tar.gz \
+ FLAC_decoder_lib,RTM0AC0000XAFLAD30SL40C,RTM0AC0000XAFLAD30SL40C.tar.gz \
+ Dolby_decoder_lib,RTM0AC0000XADD5D30SL40C,RTM0AC0000XADD5D30SL40C.tar.gz"
+
+# Audio M/W Library
+# Please add omx audio library to "_audio_mw_list"
+# Don't use space in xxx_name.
+# audio_mw_list="<software_name>,<package_name>,<copy_file_name> \
+# <software_name>,<package_name>,<copy_file_name> \
+# <software_name>,<package_name>,<copy_file_name>"
+_audio_mw_list="AAC-LC_decoder_M/W,RTM0AC0000ADAACMZ1SL40C,RTM0AC0000ADAACMZ1SL40C.tar.gz \
+ aacPlusV2_decoder_M/W,RTM0AC0000ADAAPMZ1SL40C,RTM0AC0000ADAAPMZ1SL40C.tar.gz \
+ MP3_decoder_M/W,RTM0AC0000ADMP3MZ1SL40C,RTM0AC0000ADMP3MZ1SL40C.tar.gz \
+ WMA_decoder_M/W,RTM0AC0000ADWMAMZ1SL40C,RTM0AC0000ADWMAMZ1SL40C.tar.gz \
+ AAC-LC_encoder_M/W,RTM0AC0000AEAACMZ1SL40C,RTM0AC0000AEAACMZ1SL40C.tar.gz \
+ DDD_decoder_M/W,RTM0AC0000ADDD5MZ1SL40C,RTM0AC0000ADDD5MZ1SL40C.tar.gz"
+
+# Video Decoder Library
+# Please add omx video decoder library to "_video_dec_list"
+# Don't use space in xxx_name.
+# video_dec_list="<software_name>,<package_name>,<copy_file_name> \
+# <software_name>,<package_name>,<copy_file_name> \
+# <software_name>,<package_name>,<copy_file_name>"
+_video_dec_list="H263_decoder,RTM0AC0000XV263D30SL40C,RTM0AC0000XV263D30SL40C.tar.bz2 \
+ H264_decoder,RTM0AC0000XV264D30SL40C,RTM0AC0000XV264D30SL40C.tar.bz2 \
+ H265_decoder,RTM0AC0000XV265D30SL40C,RTM0AC0000XV265D30SL40C.tar.bz2 \
+ MPEG2_decoder,RTM0AC0000XVM2VD30SL40C,RTM0AC0000XVM2VD30SL40C.tar.bz2 \
+ MPEG4_decoder,RTM0AC0000XVM4VD30SL40C,RTM0AC0000XVM4VD30SL40C.tar.bz2 \
+ VC1_decoder,RTM0AC0000XVVC1D30SL40C,RTM0AC0000XVVC1D30SL40C.tar.bz2 \
+ DivX_decoder,RTM0AC0000XVDVXD30SL40C,RTM0AC0000XVDVXD30SL40C.tar.bz2 \
+ RealVideo_decoder,RTM0AC0000XVRLVD30SL40C,RTM0AC0000XVRLVD30SL40C.tar.bz2"
+
+# Video Encoder Library
+# Please add omx video encoder library to "_video_enc_list"
+# Don't use space in xxx_name.
+# video_enc_list="<software_name>,<package_name>,<copy_file_name> \
+# <software_name>,<package_name>,<copy_file_name> \
+# <software_name>,<package_name>,<copy_file_name>"
+_video_enc_list="H264_encoder,RTM0AC0000XV264E30SL40C,RTM0AC0000XV264E30SL40C.tar.bz2"
+
+# Common library packages
+# Don't use space in xxx_name.
+# XXX_list="<software_name>,<package_name>,<copy_file_name> \
+# <software_name>,<package_name>,<copy_file_name> \
+# <software_name>,<package_name>,<copy_file_name>"
+_omx_common_list="omx_common_lib,RTM0AC0000XCMCTL30SL40C,RTM0AC0000XCMCTL30SL40C.tar.bz2"
+_uvcs_list="uvcs_lib,RCG3VUDRL4001ZDO,RCG3VUDRL4001ZDO.tar.bz2"
+_video_enc_common_list="video_enc_common,RTM0AC0000XVCMNE30SL40C,RTM0AC0000XVCMNE30SL40C.tar.bz2"
+_video_dec_common_list="video_dec_common,RTM0AC0000XVCMND30SL40C,RTM0AC0000XVCMND30SL40C.tar.bz2"
+_audio_common_list="audio_common,RTM0AC0000XACMND30SL40C,RTM0AC0000XACMND30SL40C.tar.gz"
+
+
+# DTV Library
+# Please add DTV library to "_dtv_list"
+# Don't use space in xxx_name.
+# dtv_xx_list="<software_name>,<package_name>,<copy_file_name>,<MD5_name> \
+# <software_name>,<package_name>,<copy_file_name>,<MD5_name> \
+# <software_name>,<package_name>,<copy_file_name>,<MD5_name>"
+_dtv_km_list="dtv_km,RCG3T001L4001ZDO,Software.tar.gz"
+_dtv_um_list="dtv_lib,RTM0RC0000TE020000SL40C,Software.tar.gz,RTM0RC0000TE020000SL40C1 \
+ dtv_userfunc,RTM0RC0000TE020000SL40C,../Reference/Reference.tar.gz,RTM0RC0000TE020000SL40C2"
+
+# DVD Library
+# Please add DVD library to "_dvd_list"
+# Don't use space in xxx_name.
+# dvd_list="<software_name>,<package_name>,<copy_file_name>,<MD5_name> \
+# <software_name>,<package_name>,<copy_file_name>,<MD5_name> \
+# <software_name>,<package_name>,<copy_file_name>,<MD5_name>"
+_dvd_list="dvd_lib,RTM0RC0000XDVDC301SL40C,Software.tar.gz"
+
+# CMS Library
+# Please add CMS library to "_cms_list"
+# Don't use space in xxx_name.
+# cms_list="<software_name>,<package_name>,<copy_file_name> \
+# <software_name>,<package_name>,<copy_file_name> \
+# <software_name>,<package_name>,<copy_file_name>"
+_cms_list="bcm,RTM0AC0000JRCMBCV0SL40C,RTM0AC0000JRCMBCV0SL40C.tar.gz \
+ blc,RTM0AC0000JRCMBLC0SL40C,RTM0AC0000JRCMBLC0SL40C.tar.gz \
+ dgc,RTM0AC0000JRCMDGV0SL40C,RTM0AC0000JRCMDGV0SL40C.tar.gz"
+
+# ADSP
+# Please add ADSP to "_adsp_list"
+# Don't use space in xxx_name.
+# adsp_xx_list="<software_name>,<package_name>,<copy_file_name> \
+# <software_name>,<package_name>,<copy_file_name> \
+# <software_name>,<package_name>,<copy_file_name>"
+_adsp_um_list="adsp_fw,RCG3AHFWN0101ZDP,RCG3AHFWN0101ZDP.tar.gz \
+ adsp_if,RCG3AHIFL4001ZDP,RCG3AHIFL4001ZDP.tar.gz"
+_adsp_km_list="adsp_driver,RCG3AHPDL4001ZDO,RCG3AHPDL4001ZDO.tar.gz"
+
+# GFX
+# Please add GFX to "_gfx_list"
+# Don't use space in xxx_name.
+# gfx_list="<package_name(user)>,<copy_file_name(user)>,<package_name(kernel)>,<copy_file_name(kernel)> \
+# <package_name(user)>,<copy_file_name(user)>,<package_name(kernel)>,<copy_file_name(kernel)> \
+# <package_name(user)>,<copy_file_name(user)>,<package_name(kernel)>,<copy_file_name(kernel)>"
+_gfx_list="RTM0RC7795GLTG0001SL40C,r8a7795_linux_gsx_binaries_gles3.tar.bz2,RCH3G001L4001ZDO,GSX_KM_H3.tar.bz2 \
+ RTM0RC7796GLTG0001SL40C,r8a7796_linux_gsx_binaries_gles3.tar.bz2,RCM3G001L4001ZDO,GSX_KM_M3.tar.bz2 \
+ INFRTM0RC7795GLTG0001SL40C,INF_r8a7795_linux_gsx_binaries_gles3.tar.bz2,RCH3G001L4001ZDO,GSX_KM_H3.tar.bz2 \
+ INFRTM0RC7796GLTG0001SL40C,INF_r8a7796_linux_gsx_binaries_gles3.tar.bz2,RCM3G001L4001ZDO,GSX_KM_M3.tar.bz2"
+
+# ICCOM
+# Please add ICCOM to "_iccom_list"
+# Don't use space in xxx_name.
+# iccom_xx_list="<software_name>,<package_name>,<copy_file_name>,<MD5_name> \
+# <software_name>,<package_name>,<copy_file_name>,<MD5_name> \
+# <software_name>,<package_name>,<copy_file_name>,<MD5_name>"
+_iccom_km_list="iccom_mfis,RCG3ZLIDL4001ZNO,iccom-mfis.tar.bz2,RCG3ZLIDL4001ZNO1 \
+ iccom_sample,RCG3ZLIDL4001ZNO,iccom-hwspinlock-sample.tar.bz2,RCG3ZLIDL4001ZNO2"
+_iccom_um_list="iccom_lib,RCG3ZLILL4001ZNO,libiccom.tar.bz2,RCG3ZLILL4001ZNO"
+
+# Crypto Packgae list
+# Please add crypto (zip) package name to "_crypto_pkg_list"
+# Don't use space in xxx_name.
+# crypto_pkg_list="<packgae name> <packgae name> <packgae name>"
+_crypto_pkg_list="RTM0AC0000ADDD5MZ1SL40C"
+
+##### static value
+_MODE_ZIP=1
+_MODE_TAR=2
+_MODE_CRYPTO_ZIP=3
+_GFX_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-gles/kernel-module-gles"
+_GFX_UM_INST_DIR="../meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module"
+_UVCS_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-uvcs/kernel-module-uvcs-drv"
+_OMX_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/omx-module/omx-user-module"
+_DTV_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-dtv/files"
+_DTV_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/dtv-module/dtv-user-module"
+_DVD_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/dvd-module/dvd-user-module"
+_CMS_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/cms-module/cms-user-module"
+_ADSP_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-adsp/xtensa-hifi"
+_ADSP_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/adsp-module/files"
+_ICCOM_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-iccom/files"
+_ICCOM_UM_INST_DIR="../meta-rcar-gen3/recipes-connectivity/iccom-module/files"
+
+##### common function
+
+# $1: search file name
+# $2: search directory
+# return global variable
+# _find_filename: find filename
+# _extract_mode: _MODE_ZIP or _MODE_TAR
+func_cmn_find_file()
+{
+# echo "$1"
+# echo "$2"
+ if [ -z "$1" ]; then
+ func_error "ERROR: func_cmn_find_file: empty filename"
+ fi
+
+ if [ -z "$2" ]; then
+ _search_dir=${_src_full}
+ else
+ _search_dir=$2
+ fi
+
+ # search zip file
+# zip_count=`find ${_search_dir} -maxdepth 1 -name "$1*.zip" | wc -l`
+ zip_count=`ls ${_search_dir}/$1*.zip 2>/dev/null | wc -l`
+
+ # search tar file
+# tar_count=`find ${_search_dir} -maxdepth 1 -name "$1*.tar.*" | wc -l`
+ tar_count=`ls ${_search_dir}/$1*.tar.* 2>/dev/null | wc -l`
+
+ # duplicate file check
+ if [ 1 -lt `expr $zip_count + $tar_count` ]; then
+ echo "file1_zip = $zip_count"
+ echo "file1_tar = $tar_count"
+ func_error "ERROR: $1: too many files"
+ fi
+
+ crypto_zip_count=0
+ for i in ${_crypto_pkg_list}
+ do
+ if [ $1 = $i ]; then
+ crypto_zip_count=$zip_count
+ zip_count=0
+ fi
+ done
+
+ # set result
+ if [ 1 = $zip_count ]; then
+ _find_filename=$(ls ${_search_dir}/$1*.zip)
+ _extract_mode=${_MODE_ZIP}
+ elif [ 1 = $tar_count ]; then
+ _find_filename=$(ls ${_search_dir}/$1*.tar.*)
+ _extract_mode=${_MODE_TAR}
+ elif [ 1 = $crypto_zip_count ]; then
+ _find_filename=$(ls ${_search_dir}/$1*.zip)
+ _extract_mode=${_MODE_CRYPTO_ZIP}
+ else
+ _find_filename=""
+ fi
+}
+
+# $1: Mode
+# $2: archive file name
+func_cmn_extract_archive()
+{
+ case $1 in
+ $_MODE_ZIP)
+# echo "Zip mode"
+ unzip -oq $2
+ ;;
+ $_MODE_TAR)
+# echo "Tar mode"
+ tar xf $2
+ ;;
+ $_MODE_CRYPTO_ZIP)
+# echo "Crypto Zip mode"
+ unzip -oq $2
+ top_dir=$(basename $2)
+ top_dir=${top_dir%.*}
+ cd ${top_dir}
+ unzip -oq *.zip
+ if [ $? -gt 0 ]; then
+ func_error "ERROR: FAILED ZIP PASSWORD"
+ fi
+ cd ${TMPWORK}
+ ;;
+ *)
+ func_error "ERROR: func_cmn_extract_archive: mode error."
+ exit 1
+ ;;
+ esac
+}
+
+# $1: set target filename.
+# $2: set MD5 expectation value.
+func_cmn_md5_check()
+{
+ _md5_func_param_filename=$1
+ _md5_func_param_expectation=$2
+ if [ ! -e ${_md5_func_param_filename} ]; then
+ func_error "func_cmn_md5_check : ERROR ${_md5_func_param_filename} not found."
+ fi
+
+ _calc_md5=$(md5sum ${_md5_func_param_filename} | cut -d " " -f1)
+
+ if [ -n "${_no_md5check}" ] || [ -z ${_md5_func_param_expectation} ]; then
+ echo "Skip MD5 : `basename ${_md5_func_param_filename}`"
+ return
+ fi
+
+ if [ -n "${_debug}" ]; then
+ echo "MD5 target file = ${_md5_func_param_filename}"
+ echo "calc_md5 = ${_calc_md5}"
+ echo "expect_value = ${_md5_func_param_expectation}"
+ fi
+
+ if [ ${_calc_md5} = ${_md5_func_param_expectation} ]; then
+ echo "MD5 OK : `basename ${_md5_func_param_filename}`"
+ else
+ echo "calc_md5 = ${_calc_md5}"
+ echo "expect_value = ${_md5_func_param_expectation}"
+ func_error "MD5 ERROR : ${_md5_func_param_filename}"
+ fi
+}
+
+##### Error function
+# $1: error message
+func_error()
+{
+ echo "$1"
+ # cleanup temp directory.
+ func_clean_tempdir
+ exit 1
+}
+
+##### cleanup temp directory
+func_clean_tempdir()
+{
+ echo "cleanup temp directory"
+ rm -rf ${TMPWORK}
+}
+
+##### Template function for Single package
+
+# $1: package name
+# $2: search target filename
+# $3: search directory (full path)
+# return
+# _find_filename : the found file (full path)
+# _extract_top_dir_name
+func_search_file_in_package()
+{
+ # search package file
+ func_cmn_find_file $1 $3
+ if [ -n "${_debug}" ]; then
+ echo ""
+ echo "FileName = ${_find_filename}"
+ echo "Mode = ${_extract_mode}"
+ fi
+
+ if [ -z "${_find_filename}" ]; then
+ return
+ fi
+
+ # extract
+ func_cmn_extract_archive ${_extract_mode} "${_find_filename}"
+
+ # Get directory name
+ # {PATH}/Package_Version.tar.gz or XXXX.zip --> Package_Version
+ top_dir=$(basename ${_find_filename})
+ top_dir=${top_dir%.*}
+
+ # search file
+ num=`find ${top_dir} -name $2 | wc -l`
+ if [ ${num} -eq 1 ]; then
+ _find_filename=`find ${top_dir} -name $2`
+ else
+ # same filename exists.
+ _find_filename=`find ${top_dir} -name $2 | grep Software`
+ fi
+
+ # set mode
+ if [ `echo ${_find_filename} | grep '\.'zip` ]; then
+ _extract_mode=${_MODE_ZIP}
+ else
+ _extract_mode=${_MODE_TAR}
+ fi
+
+ # set return value
+ _extract_top_dir_name=${top_dir}
+}
+
+# $1: package name
+# $2: copy filename (md5 target)
+# $3: expect MD5 value
+# $4: search directory (full path)
+# return
+# _find_file_name
+# _extract_top_dir_name
+func_search_and_md5check()
+{
+ # search package file
+ func_cmn_find_file $1 $4
+ if [ -n "${_debug}" ]; then
+ echo ""
+ echo "FileName = ${_find_filename}"
+ echo "Mode = ${_extract_mode}"
+ fi
+
+ if [ -z "${_find_filename}" ]; then
+ return
+ fi
+
+ # extract
+ func_cmn_extract_archive ${_extract_mode} "${_find_filename}"
+
+ # MD5
+ # Get directory name
+ # {PATH}/Package_Version.tar.gz or XXXX.zip --> Package_Version
+ top_dir=$(basename ${_find_filename})
+ top_dir=${top_dir%.*}
+
+ # call func_cmn_md5_check
+ func_cmn_md5_check "${top_dir}/$1/Software/$2" "$3"
+
+ # set return value
+ _extract_top_dir_name=${top_dir}
+}
+
+##### Template function for Group package
+# $1: group package name
+# $2: single package name
+# $3: copy filename (md5 target)
+# $4: expect MD5 value
+# $5: search directory (full path)
+# return
+# _find_file_name
+# _extract_top_dir_name
+#
+# NOTE) This function support level1 packaging. "grp pkg in grp pkg" dose note support.
+func_search_and_md5check_grp()
+{
+ # search group package @SRCDIR
+ func_cmn_find_file $1 $5
+ if [ -n "${_debug}" ]; then
+ echo "search group package"
+ echo "FileName = ${_find_filename}"
+ echo "Mode = ${_extract_mode}"
+ echo ""
+ fi
+
+ if [ -z "${_find_filename}" ]; then
+ return
+ fi
+
+ # extract group package @TMPWORK
+ func_cmn_extract_archive ${_extract_mode} "${_find_filename}"
+
+ cd ${_find_filename}
+ # check group pachage structure
+ # <Package name>_<version>/Package_Info.txt
+ top_dir=$(basename ${_find_filename})
+ top_dir=${top_dir%.*}
+
+ if [ ! -e ${top_dir}/Package_Info.txt ]; then
+ echo "grp package = $1"
+ echo "single package = $2"
+ func_error "ERROR: Package_Info.txt not found in Group package."
+ fi
+
+ # search single package @TMPWORK/TOPDIR/<Group Package name>/
+ func_cmn_find_file $2 "${TMPWORK}/${top_dir}/$1"
+ if [ -n "${_debug}" ]; then
+ echo "search single package"
+ echo "FileName = ${_find_filename}"
+ echo "Mode = ${_extract_mode}"
+ echo ""
+ fi
+
+ if [ -z "${_find_filename}" ]; then
+ return
+ fi
+
+ # mv <single package> TMPWORK/.
+ mv ${_find_filename} ${TMPWORK}/.
+
+ # delete group package
+ rm -rf ${TMPWORK}/${top_dir}
+
+ # call search and md5check @TMPWORK
+ func_search_and_md5check $2 $3 $4 ${TMPWORK}
+}
+
+##### File search and MD5check for Package list
+# $1: package list
+# $2: rigid flag (1: true, other: false)
+#
+# return
+# 1: [Success] One or more files were found.
+# 0: [Fail] File not found
+#
+# package list format
+# list ="<software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name>"
+#
+# Note) Don't use space in xxx_name.
+# Note) md5_variable_name is defined in md5list.txt.
+# Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO
+# It is omissible. The default is "_MD5_<package_name>".
+func_list_search_and_md5check ()
+{
+ find_flag=0
+
+ for i in $1
+ do
+ sw_name=`echo $i | cut -d "," -f 1`
+ pkg_name=`echo $i | cut -d "," -f 2`
+ copyfile_name=`echo $i | cut -d "," -f 3`
+ md5_val=`echo $i | cut -d "," -f 4`
+
+ # <MD5_name> is empty. Default MD5 name is "_MD5_<pkg_name>"
+ if [ -z "${md5_val}" ]; then
+ md5_val=`eval echo '$_MD5_'${pkg_name}`
+ else
+ md5_val=`eval echo '$_MD5_'${md5_val}`
+ fi
+
+ if [ -n "${_debug}" ]; then
+ echo ""
+ echo "sw_name = $sw_name"
+ echo "pkg_name = $pkg_name"
+ echo "copyfile_name = $copyfile_name"
+ echo "md5_val = $md5_val"
+ fi
+
+ func_search_and_md5check "${pkg_name}" "${copyfile_name}" "${md5_val}" "${_src_full}"
+ if [ -z "${_find_filename}" ]; then
+ echo "${sw_name} not found!"
+ # rigid flag = TRUE. Not found = ERROR
+ if [ "X$2" = "X1" ]; then
+ return 0
+ fi
+ else
+ find_flag=1
+ fi
+ done
+
+ return ${find_flag}
+}
+
+##### File search and install (without MD5check) for Package list
+#
+# $1: package list
+# $2: install directory
+#
+# return
+# 1: [Success] One or more files were installed.
+# 0: [Fail] File not found
+#
+# package list format
+# list ="<software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name>"
+#
+# Note) Don't use space in xxx_name.
+# Note) md5_variable_name is defined in md5list.txt.
+# Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO
+# It is omissible. The default is "_MD5_<package_name>".
+func_list_search_and_install_wo_md5check()
+{
+ find_flag=0
+
+ for i in $1
+ do
+ sw_name=`echo $i | cut -d "," -f 1`
+ pkg_name=`echo $i | cut -d "," -f 2`
+ copyfile_name=`echo $i | cut -d "," -f 3`
+ md5_val=`echo $i | cut -d "," -f 4`
+
+ # <MD5_name> is empty. Default MD5 name is "_MD5_<pkg_name>"
+ if [ -z "${md5_val}" ]; then
+ md5_val=`eval echo '$_MD5_'$pkg_name`
+ else
+ md5_val=`eval echo '$_MD5_'${md5_val}`
+ fi
+
+ copyfile_name=$(basename ${copyfile_name})
+
+ if [ -n "${_debug}" ]; then
+ echo ""
+ echo "sw_name = $sw_name"
+ echo "pkg_name = $pkg_name"
+ echo "copyfile_name = $copyfile_name"
+ echo "md5_val = $md5_val"
+ fi
+
+ # file search
+ func_search_file_in_package "${pkg_name}" "${copyfile_name}" "${_src_full}"
+ if [ -z "${_find_filename}" ]; then
+ echo "${sw_name} not found!"
+ else
+ find_flag=1
+
+ # install
+ install -d $2
+ install -m 0644 ${_find_filename} $2
+ echo "Installed $sw_name"
+ echo " : ${pkg_name}"
+ fi
+ done
+
+ return ${find_flag}
+}
+
+##### File search and install for Package list
+#
+# $1: package list
+# $2: install directory
+#
+# return
+# 1: [Success] One or more files were installed.
+# 0: [Fail] File not found
+#
+# package list format
+# list ="<software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \
+# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name>"
+#
+# Note) Don't use space in xxx_name.
+# Note) md5_variable_name is defined in md5list.txt.
+# Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO
+# It is omissible. The default is "_MD5_<package_name>".
+func_list_search_and_install()
+{
+ find_flag=0
+
+ for i in $1
+ do
+ sw_name=`echo $i | cut -d "," -f 1`
+ pkg_name=`echo $i | cut -d "," -f 2`
+ copyfile_name=`echo $i | cut -d "," -f 3`
+ md5_val=`echo $i | cut -d "," -f 4`
+
+ # <MD5_name> is empty. Default MD5 name is "_MD5_<pkg_name>"
+ if [ -z "${md5_val}" ]; then
+ md5_val=`eval echo '$_MD5_'$pkg_name`
+ else
+ md5_val=`eval echo '$_MD5_'${md5_val}`
+ fi
+
+ if [ -n "${_debug}" ]; then
+ echo ""
+ echo "sw_name = $sw_name"
+ echo "pkg_name = $pkg_name"
+ echo "copyfile_name = $copyfile_name"
+ echo "md5_val = $md5_val"
+ fi
+
+ # seach & MD5 check
+ func_search_and_md5check "${pkg_name}" "${copyfile_name}" "${md5_val}" "${_src_full}"
+ if [ -z "${_find_filename}" ]; then
+ echo "${sw_name} not found!"
+ else
+ find_flag=1
+
+ # Get directory name
+ # _find_filename = pkg file (full path). It is not copyfile.
+ top_dir=$(basename ${_find_filename})
+ top_dir=${top_dir%.*}
+
+ # install
+ install -d $2
+ install -m 0644 ${top_dir}/${pkg_name}/Software/${copyfile_name} $2
+ echo "Installed $sw_name"
+ echo " : ${pkg_name}"
+ fi
+ done
+
+ return ${find_flag}
+}
+
+##### Package function
+
+# For 3D graphics packages
+func_gfx()
+{
+ echo ""
+ echo "Copying for Graphic Packages"
+
+ copy_flag=0
+
+ for i in ${_gfx_list}
+ do
+ user_pkg_name=`echo $i | cut -d "," -f 1`
+ user_copyfile_name=`echo $i | cut -d "," -f 2`
+ user_md5_val=`eval echo '$_MD5_'${user_pkg_name}`
+ kern_pkg_name=`echo $i | cut -d "," -f 3`
+ kern_copyfile_name=`echo $i | cut -d "," -f 4`
+ kern_md5_val=`eval echo '$_MD5_'${kern_pkg_name}`
+
+ if [ -n "${_debug}" ]; then
+ echo ""
+ echo "user_pkg_name = ${user_pkg_name}"
+ echo "user_copyfile_name= ${user_copyfile_name}"
+ echo "user_md5_val = ${user_md5_val}"
+ echo "kern_pkg_name = ${kern_pkg_name}"
+ echo "kern_copyfile_name= ${kern_copyfile_name}"
+ echo "kern_md5_val = ${kern_md5_val}"
+ fi
+
+ # user module (file1)
+ func_search_and_md5check "${user_pkg_name}" "${user_copyfile_name}" "${user_md5_val}" "${_src_full}"
+
+ if [ -z "${_find_filename}" ]; then
+ echo "${user_pkg_name} not found!"
+ continue
+ fi
+
+ file1_top_dir=${_extract_top_dir_name}
+ echo "file1 top : ${file1_top_dir}"
+
+ # kernel module (file2)
+ func_search_and_md5check "${kern_pkg_name}" "${kern_copyfile_name}" "${kern_md5_val}" "${_src_full}"
+
+ # file1 exist, but file2 not exist
+ if [ -z "${_find_filename}" ]; then
+ func_error "ERROR: func_gfx: package file for Graphic is incomplete."
+ fi
+
+ file2_top_dir=${_extract_top_dir_name}
+ echo "file2 top : ${file2_top_dir}"
+
+ # Finally copy is performed
+ copy_flag=1
+ install -d ${_GFX_UM_INST_DIR}
+ install -m 0644 ${file1_top_dir}/${user_pkg_name}/Software/${user_copyfile_name} ${_GFX_UM_INST_DIR}/${user_copyfile_name##INF_}
+ install -d ${_GFX_KM_INST_DIR}
+ install -m 0644 ${file2_top_dir}/${kern_pkg_name}/Software/${kern_copyfile_name} ${_GFX_KM_INST_DIR}
+ echo "Installed GFX package"
+ echo " : ${user_pkg_name}"
+ echo " : ${kern_pkg_name}"
+ echo ""
+ done
+
+ if [ ${copy_flag} -eq 0 ]; then
+ return
+ fi
+
+ echo ""
+ echo "Packages for GFX module were found and copied."
+ echo /=======================================================/
+}
+
+##### For Multi Media
+
+# For Audio library copy
+#
+# Global
+# _audio_list: audio library list
+# Return
+# 0: Not found
+# 1: Success
+func_audio_lib()
+{
+ # MD5 check: OMX Media Component Audio Common Library for Linux
+ func_list_search_and_md5check "${_audio_common_list}" "1"
+ if [ $? -eq 0 ]; then
+ echo "Audio Common Library not found!"
+ echo ""
+ return 0
+ fi
+
+ # MD5 check: audio library.
+ func_list_search_and_md5check "${_audio_list}"
+ if [ $? -eq 0 ]; then
+ # library not found.
+ echo ""
+ echo "Audio library not found."
+ return 0
+ fi
+
+ # Add audio common library to list
+ _audio_list="${_audio_common_list} ${_audio_list}"
+
+ # Install omx common lib (if not installed)
+ func_install_omx_common
+
+ # Install Audio library packages
+ func_list_search_and_install_wo_md5check "${_audio_list}" "${_OMX_UM_INST_DIR}"
+ _audio_common_install=1
+
+ return 1
+}
+
+# For Audio library
+func_audio()
+{
+ echo ""
+ echo "Copying for Audio Common Packages"
+
+ _audio_common_install=0
+
+ # Audio requires OMX common library
+ if [ ${_omx_common_install} -eq 0 ]; then
+ # MD5 check (rigid flag=TRUE)
+ func_list_search_and_md5check "${_omx_common_list}" "1"
+ if [ $? -eq 0 ]; then
+ echo "OMX Common Library not found!"
+ echo ""
+ return
+ fi
+ else
+ echo "OMX Common Library already installed"
+ fi
+
+ # Audio Library
+ func_audio_lib
+ if [ $? -eq 0 ]; then
+ echo ""
+ echo "Skip Audio Packages"
+ echo ""
+ return
+ fi
+
+ echo ""
+ echo "Packages for Audio module were found and copied."
+ echo /=======================================================/
+}
+
+# For Audio M/W
+# Global
+# _audio_mw_list: audio M/W library list
+# Return
+# 0: Not found
+# 1: Success
+func_audio_mw()
+{
+ echo ""
+ echo "Copying for Audio M/W Packages"
+
+ # MD5 check
+ func_list_search_and_md5check "${_audio_mw_list}"
+ if [ $? -eq 0 ]; then
+ # library not found.
+ echo ""
+ echo "Packages for Audio M/W module were not found."
+ return 0
+ fi
+
+ # Install Audio M/W library packages
+ func_list_search_and_install_wo_md5check "${_audio_mw_list}" "${_OMX_UM_INST_DIR}"
+
+ echo ""
+ echo "Packages for Audio M/W module were found and copied."
+ echo /=======================================================/
+
+ return 1
+}
+
+# install OMX common library
+func_install_omx_common()
+{
+ if [ ${_omx_common_install} -eq 0 ]; then
+ echo ""
+ echo "Install for OMX Common Packages"
+ func_list_search_and_install_wo_md5check "${_omx_common_list}" "${_OMX_UM_INST_DIR}"
+ _omx_common_install=1
+ fi
+}
+
+# install uvcs driver
+func_install_uvcs()
+{
+ if [ ${_uvcs_install} -eq 0 ]; then
+ echo ""
+ echo "Installed UVCS driver"
+ func_list_search_and_install_wo_md5check "${_uvcs_list}" "${_UVCS_INST_DIR}"
+ _uvcs_install=1
+ fi
+}
+
+# search & MD5 check for OMX Video Decoder library
+# Global
+# _video_dec_list: video decoder list
+# Return
+# 0: Not found
+# 1: Success
+func_video_decoder_lib()
+{
+ echo ""
+ echo "Copying for Video Decoder Library Packages"
+
+ # MD5 check: Decoder Common Library (rigid flag=TRUE)
+ func_list_search_and_md5check "${_video_dec_common_list}" "1"
+ if [ $? -eq 0 ]; then
+ echo "OMX Video Decoder Common Library not found!"
+ return 0
+ fi
+
+ # MD5 check: Video Decoder Library
+ func_list_search_and_md5check "${_video_dec_list}"
+ if [ $? -eq 0 ]; then
+ # library not found.
+ return 0
+ fi
+
+ # install OMX common lib (if not installed)
+ func_install_omx_common
+
+ # install UVCS driver (if not installed)
+ func_install_uvcs
+
+ # Add video decoder common lib to list
+ _video_dec_list="${_video_dec_common_list} ${_video_dec_list}"
+
+ # install searched library
+ func_list_search_and_install_wo_md5check "${_video_dec_list}" "${_OMX_UM_INST_DIR}"
+ _video_decoder_common_install=1
+
+ return 1
+}
+
+# search & MD5 check for OMX Video Encoder library
+# Global
+# _video_enc_list: video encoder list
+# Return
+# 0: Not found
+# 1: Success
+func_video_encoder_lib()
+{
+ echo ""
+ echo "Copying for Video Encoder Library Packages"
+
+
+ # MD5 check Encoder Common Library (rigid flag=TRUE)
+ func_list_search_and_md5check "${_video_enc_common_list}" "1"
+ if [ $? -eq 0 ]; then
+ echo "OMX Video Encoder Common Library not found!"
+ return 0
+ fi
+ _video_encoder_common_install=0
+
+ # Video Encoder Library
+ # MD5 check
+ func_list_search_and_md5check "${_video_enc_list}"
+ if [ $? -eq 0 ]; then
+ # library not found.
+ return 0
+ fi
+
+ # install common lib (if not installed)
+ func_install_omx_common
+
+ # install UVCS driver (if not installed)
+ func_install_uvcs
+
+ # Add Video encoder common library to list
+ _video_enc_list="${_video_enc_common_list} ${_video_enc_list}"
+
+ # install searched library
+ func_list_search_and_install_wo_md5check "${_video_enc_list}" "${_OMX_UM_INST_DIR}"
+ _video_encoder_common_install=1
+
+ return 1
+}
+
+# For Video decoder
+# Global
+# _video_dec_list: video decoder list
+# Return
+# 0: Not found
+# 1: Success
+func_video_decoder()
+{
+ echo ""
+ echo "Copying for Video Decoder Packages"
+
+ # OMX Common library
+ if [ ${_omx_common_install} -eq 0 ]; then
+ # MD5 check (rigid flag=TRUE)
+ func_list_search_and_md5check "${_omx_common_list}" "1"
+ if [ $? -eq 0 ]; then
+ echo "OMX Common Library not found!"
+ echo ""
+ return
+ fi
+ else
+ echo "OMX Common Library already installed"
+ fi
+
+ # UVCS driver
+ if [ ${_uvcs_install} -eq 0 ]; then
+ # MD5 check (rigid flag=TRUE)
+ func_list_search_and_md5check "${_uvcs_list}" "1"
+ if [ $? -eq 0 ]; then
+ echo "UVCS driver not found!"
+ echo ""
+ return
+ fi
+ else
+ echo "UVCS driver already installed"
+ fi
+
+ # OMX Decoder
+ # Decoder common Lib
+ func_video_decoder_lib
+ if [ $? -eq 0 ]; then
+ echo ""
+ echo "Skip Video Decoder Packages"
+ echo ""
+ return
+ fi
+
+ echo ""
+ echo "Packages for video decoder module were found and copied."
+ echo /=======================================================/
+}
+
+# For Video encoder
+func_video_encoder()
+{
+ echo ""
+ echo "Copying for Video Encoder Packages"
+
+ # OMX Common library
+ if [ ${_omx_common_install} -eq 0 ]; then
+ # MD5 check (rigid flag=TRUE)
+ func_list_search_and_md5check "${_omx_common_list}" "1"
+ if [ $? -eq 0 ]; then
+ echo "OMX Common Library not found!"
+ echo ""
+ return
+ fi
+ else
+ echo "OMX Common Library already installed"
+ fi
+
+ # UVCS driver
+ if [ ${_uvcs_install} -eq 0 ]; then
+ # MD5 check (rigid flag=TRUE)
+ func_list_search_and_md5check "${_uvcs_list}" "1"
+ if [ $? -eq 0 ]; then
+ echo "UVCS driver not found!"
+ echo ""
+ return
+ fi
+ else
+ echo "UVCS driver already installed"
+ fi
+
+ # OMX Encoder
+ # Encoder common Lib
+ func_video_encoder_lib
+ if [ $? -eq 0 ]; then
+ echo ""
+ echo "Skip Video Encoder Packages"
+ echo ""
+ return
+ fi
+
+ echo ""
+ echo "Packages for video encoder module were found and copied."
+ echo /=======================================================/
+}
+
+# For DTV kernel module
+func_dtv_kern()
+{
+ echo ""
+ echo "Copying for DTV kernel module"
+
+ _dtv_kern_install=0
+
+ func_list_search_and_md5check "${_dtv_km_list}"
+ if [ $? -eq 0 ]; then
+ # library not found.
+ echo ""
+ echo "DTV kernel library not found!"
+ return
+ fi
+
+ pkg_name=`echo ${_dtv_km_list} | cut -d "," -f 2`
+ copyfile_name=`echo ${_dtv_km_list} | cut -d "," -f 3`
+
+ # extract --> archive --> copied
+ echo "Installed DTV kernel modules"
+ func_search_file_in_package "${pkg_name}" "${copyfile_name}" "${_src_full}"
+ func_cmn_extract_archive "${_extract_mode}" "${_find_filename}"
+
+ dtv_driver_list="ssp_drv scu_src_drv tsif_drv tddmac_drv"
+ for i in ${dtv_driver_list}
+ do
+ tar cfz $i.tar.gz $i
+ install -d ${_DTV_KM_INST_DIR}
+ install -m 644 $i.tar.gz ${_DTV_KM_INST_DIR}
+ echo " : $i.tar.gz"
+ done
+
+ _dtv_kern_install=1
+
+ echo ""
+ echo "DTV kernel module were found and copied."
+ echo /=======================================================/
+}
+
+# For DTV lib
+func_dtv_lib()
+{
+ echo ""
+ echo "Copying for DTV Library Packages"
+
+ # DTV kernel modules
+ if [ ${_dtv_kern_install} -eq 0 ]; then
+ echo "DTV kernel module not found!"
+ echo "Skip DTV Package"
+ echo ""
+ return
+ fi
+
+ # MD5 check (rigid flag=TRUE)
+ func_list_search_and_md5check "${_dtv_um_list}" "1"
+ if [ $? -eq 0 ]; then
+ # library not found.
+ echo ""
+ echo "DTV library not found"
+ return
+ fi
+
+ # install
+ func_list_search_and_install_wo_md5check "${_dtv_um_list}" "${_DTV_UM_INST_DIR}"
+
+ echo ""
+ echo "DTV Package were found and copied."
+ echo /=======================================================/
+}
+
+# For DVD lib
+func_dvd_lib()
+{
+ echo ""
+ echo "Copying for DVD Library Packages"
+
+ # MD5 check (rigid flag=TRUE)
+ func_list_search_and_md5check "${_dvd_list}" "1"
+ if [ $? -eq 0 ]; then
+ # library not found.
+ echo ""
+ echo "DVD library not found"
+ return
+ fi
+
+ # install searched library
+ func_list_search_and_install_wo_md5check "${_dvd_list}" "${_DVD_UM_INST_DIR}"
+
+ echo ""
+ echo "DVD Package were found and copied."
+ echo /=======================================================/
+}
+
+# For DTV/DVD main routine
+func_dtv_dvd()
+{
+ echo ""
+ echo "Copying for DTV/DVD Packages"
+
+ # DTV/DVD requires OMX Video Decoder
+ if [ ${_video_decoder_common_install} -eq 0 ]; then
+ echo "Video Decoder Library not found!"
+ echo "Skip DTV/DVD Package"
+ echo ""
+ return
+ fi
+
+ # DTV requires Audio Decoder
+ if [ ${_audio_common_install} -eq 0 ]; then
+ echo "Audio Common Library not found!"
+ echo "Skip DTV Package"
+ echo ""
+ else
+ # DTV package
+ func_dtv_kern
+ func_dtv_lib
+ fi
+
+ # DVD package
+ func_dvd_lib
+}
+
+# For CMS main routine
+func_cms()
+{
+ echo ""
+ echo "Copying for CMS Packages"
+
+ copy_flag=0
+
+ # MD5 check
+ func_list_search_and_md5check "${_cms_list}"
+ if [ $? -eq 0 ]; then
+ # library not found.
+ echo "Skip CMS package"
+ echo ""
+ return
+ fi
+
+ # Install library
+ func_list_search_and_install_wo_md5check "${_cms_list}" "${_CMS_UM_INST_DIR}"
+
+ echo ""
+ echo "Packages for CMS were found and copied."
+ echo /=======================================================/
+}
+
+# For ADSP main routine
+func_adsp()
+{
+ echo ""
+ echo "Copying for ADSP Packages"
+
+ # MD5 check (rigid flag = TRUE)
+ # In ADSP, all files are necesarry
+ func_list_search_and_md5check "${_adsp_km_list}" "1"
+ if [ $? -eq 0 ]; then
+ # library not found.
+ echo "Skip ADSP Package"
+ echo ""
+ return
+ fi
+
+ func_list_search_and_md5check "${_adsp_um_list}" "1"
+ if [ $? -eq 0 ]; then
+ # library not found.
+ echo "Skip ADSP Package"
+ echo ""
+ return
+ fi
+
+ # Install kernel module
+ func_list_search_and_install_wo_md5check "${_adsp_km_list}" "${_ADSP_KM_INST_DIR}"
+
+ # Install user module
+ func_list_search_and_install_wo_md5check "${_adsp_um_list}" "${_ADSP_UM_INST_DIR}"
+
+ echo ""
+ echo "Packages for ADSP were found and copied."
+ echo /=======================================================/
+}
+
+# For ICCOM main routine
+func_iccom()
+{
+ echo ""
+ echo "Copying for ICCOM Packages"
+
+ # MD5 check (rigid flag = TRUE)
+ # In ICCOM, all files are necesarry
+ func_list_search_and_md5check "${_iccom_km_list}" "1"
+ if [ $? -eq 0 ]; then
+ # library not found.
+ echo "Skip ICCOM Package"
+ echo ""
+ return
+ fi
+
+ func_list_search_and_md5check "${_iccom_um_list}" "1"
+ if [ $? -eq 0 ]; then
+ # library not found.
+ echo "Skip ICCOM Package"
+ echo ""
+ return
+ fi
+
+ # Install kernel module
+ func_list_search_and_install_wo_md5check "${_iccom_km_list}" "${_ICCOM_KM_INST_DIR}"
+
+ # Install user module
+ func_list_search_and_install_wo_md5check "${_iccom_um_list}" "${_ICCOM_UM_INST_DIR}"
+
+ echo ""
+ echo "Packages for ICCOM were found and copied."
+ echo /=======================================================/
+}
+
+################################
+# Copy Script Main routine
+################################
+echo "Copyscript for R-Car Gen3"
+echo
+#### 1) Checking current directory
+if [ ! -d meta-rcar-gen3 ]; then
+ echo "ERROR: Please extract meta-renesas and cd to it, before execute $0"
+ exit 1
+fi
+
+#### 2) Checking Arguments
+if [ "X$1" = "X" ]; then
+ usage
+ exit 1
+fi
+
+while [ $# -gt 0 ] ; do
+ case "$1" in
+ -f|--force)
+ _no_md5check=1
+ ;;
+ -d|--debug)
+ _debug=1
+ ;;
+ *)
+ _src_dirname=$(basename $1)
+ _src_path=$(cd $(dirname $1) && pwd)
+ _src_full=${_src_path}/${_src_dirname}
+ ;;
+ esac
+ shift
+done
+
+# source directory check
+if [ ! -d ${_src_path}/${_src_dirname} ]; then
+ echo "${_src_path}/${_src_dirname} not found."
+ usage
+ exit 1
+fi
+
+if [ -n "${_debug}" ]; then
+ echo "src = ${_src_dirname}"
+ echo "src_path = ${_src_path}"
+ echo "src_full = ${_src_full}"
+ echo "no_md5check = ${_no_md5check}"
+ echo ""
+fi
+
+##### 3) create temp directory
+TMPWORK=${PWD}/CP_SCRIPT_TEMP
+if [ -d ${TMPWORK} ]; then
+ echo "ERROR: Work directory already exist."
+ exit 1
+fi
+install -d -m 700 ${TMPWORK}
+cd ${TMPWORK}
+
+##### 4) copy
+# initialize flag
+_omx_common_install=0
+_uvcs_install=0
+_audio_common_install=0
+_video_decoder_common_install=0
+_video_encoder_common_install=0
+_dtv_kern_install=0
+
+func_gfx
+func_audio
+func_audio_mw
+func_video_decoder
+func_video_encoder
+func_dtv_dvd
+func_cms
+func_adsp
+func_iccom
+
+##### 5) cleanup temp directory
+func_clean_tempdir
+
+##### End
+echo "Complete copying !"
diff --git a/meta-rcar-gen3/docs/sample/copyscript/md5list.txt b/meta-rcar-gen3/docs/sample/copyscript/md5list.txt
new file mode 100644
index 0000000..09908e4
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/copyscript/md5list.txt
@@ -0,0 +1,54 @@
+# GFX
+_MD5_RTM0RC7795GLTG0001SL40C=""
+_MD5_RCH3G001L4001ZDO=""
+_MD5_RTM0RC7796GLTG0001SL40C=""
+_MD5_RCM3G001L4001ZDO=""
+_MD5_INFRTM0RC7795GLTG0001SL40C=""
+_MD5_INFRTM0RC7796GLTG0001SL40C=""
+# OMX AUDIO
+_MD5_RTM0AC0000ADAACMZ1SL40C="bd667e3092445ea03a1f058d55357161"
+_MD5_RTM0AC0000XAAACD30SL40C="0d6e0b1542ac0d410af52ee9b587c4c4"
+_MD5_RTM0AC0000XACMND30SL40C="d6e7aa558ec54d14aa240b85fccedb57"
+_MD5_RTM0AC0000ADAAPMZ1SL40C="0b9db0589b0af721fa5c7a7056a2d451"
+_MD5_RTM0AC0000ADMP3MZ1SL40C="053243f43212e33e36926ffaf2ddc0a4"
+_MD5_RTM0AC0000ADWMAMZ1SL40C="8353f20235a6db52f16ba64c18e58d0f"
+_MD5_RTM0AC0000XAAAPD30SL40C="21301077ada5092c19e9c946a0266877"
+_MD5_RTM0AC0000XAMP3D30SL40C="a1880b189f4d7055a9fed70cdb9f1a5c"
+_MD5_RTM0AC0000XAWMAD30SL40C="dff1c890612240b9ed2fcb021a37a6e7"
+_MD5_RTM0AC0000AEAACMZ1SL40C="652d8f15c327646f9760de9f9a5f1dc2"
+_MD5_RTM0AC0000XAAACE30SL40C="fb5489c649f825caea9ec6cf8edbad57"
+_MD5_RTM0AC0000XAALAD30SL40C="30fa3e66807c3f5b7d09a6e5eec60c01"
+_MD5_RTM0AC0000XAFLAD30SL40C="161bbf4cd51006fcc184d593ed53047f"
+_MD5_RTM0AC0000XADD5D30SL40C="d712ce9d896db9204f62cbd65de5a7ab"
+_MD5_RTM0AC0000ADDD5MZ1SL40C=""
+# OMX VIDEO
+_MD5_RTM0AC0000XV263D30SL40C="a4fbfc8091940004f324261d607b02eb"
+_MD5_RTM0AC0000XV264D30SL40C="7b8efc458a432e6154d11835470adf82"
+_MD5_RTM0AC0000XCMCTL30SL40C="ef10f4390774101cc42973dd34b10ace"
+_MD5_RCG3VUDRL4001ZDO="50b7fa17e27059f93378745e21e8c087"
+_MD5_RTM0AC0000XVCMND30SL40C="709f278ae7aeea1a1ce7d4b5d9832b21"
+_MD5_RTM0AC0000XV265D30SL40C="145c841dae7a02cd2e4a3a4696c641f1"
+_MD5_RTM0AC0000XVM2VD30SL40C="73f45b86a6ead4fe66c2f52494449491"
+_MD5_RTM0AC0000XVM4VD30SL40C="0d19e9b474a6e7062663d3d892b87039"
+_MD5_RTM0AC0000XVVC1D30SL40C="c37767c5beac63cc1a1607f3506a9520"
+_MD5_RTM0AC0000XVCMNE30SL40C="1b6f699c432d10f4eaed56f4666f1f8a"
+_MD5_RTM0AC0000XV264E30SL40C="e2e283c378e333bb6d5ad8205f143caf"
+_MD5_RTM0AC0000XVDVXD30SL40C="7f459cc9ce9f95413101afbf7bcd80d3"
+_MD5_RTM0AC0000XVRLVD30SL40C="db023a5aa5733307516fd13c3b705268"
+# DTV/DVD
+_MD5_RCG3T001L4001ZDO=""
+_MD5_RTM0RC0000TE020000SL40C1=""
+_MD5_RTM0RC0000TE020000SL40C2=""
+_MD5_RTM0RC0000XDVDC301SL40C=""
+# CMS
+_MD5_RTM0AC0000JRCMBCV0SL40C="a0cbfaa60ff57ce214da102363f77bf2"
+_MD5_RTM0AC0000JRCMBLC0SL40C="e472cc72ef07fc8b6fdeffa7e7f11650"
+_MD5_RTM0AC0000JRCMDGV0SL40C="154634b2517211a00f9f1d28344edf64"
+# ADSP
+_MD5_RCG3AHFWN0101ZDP="d1acca667c26f3285619ca737bf0625c"
+_MD5_RCG3AHIFL4001ZDP="7fc31a6c6ce97a8104cd298d8a177ba6"
+_MD5_RCG3AHPDL4001ZDO="6feb62ac5839bfdb7c85f99b3e1bf50e"
+# ICCOM
+_MD5_RCG3ZLIDL4001ZNO1="ca3528b8928f44337717ae4c5674a344"
+_MD5_RCG3ZLIDL4001ZNO2="410daab0f338e4311a6e4422f770d3ee"
+_MD5_RCG3ZLILL4001ZNO="e01be9227b87dffd2c23d1067d5fa1b6"
diff --git a/meta-rcar-gen3/docs/sample/patch/patch-for-linaro-gcc/0001-rcar-gen3-add-readme-for-building-with-Linaro-Gcc.patch b/meta-rcar-gen3/docs/sample/patch/patch-for-linaro-gcc/0001-rcar-gen3-add-readme-for-building-with-Linaro-Gcc.patch
new file mode 100644
index 0000000..c00327f
--- /dev/null
+++ b/meta-rcar-gen3/docs/sample/patch/patch-for-linaro-gcc/0001-rcar-gen3-add-readme-for-building-with-Linaro-Gcc.patch
@@ -0,0 +1,151 @@
+From 019d1f04b83db8cd4d5a9381d5ef0c90e946cd05 Mon Sep 17 00:00:00 2001
+From: Phong Man Tran <phong.tran.wh@rvc.renesas.com>
+Date: Mon, 6 Jul 2015 14:48:50 +0700
+Subject: [PATCH] rcar-gen3: add readme for building with Linaro Gcc
+
+This patch add the dependent layer information, build instructions
+for using Linaro Gcc.
+
+Updated on Dec, 2016:
+- Add H3ULCB
+- Change supported branch from jethro to krogoth
+- Change Maintainer information.
+
+Signed-off-by: Phong Man Tran <phong.tran.wh@rvc.renesas.com>
+Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
+---
+ meta-rcar-gen3/README.linaro | 122 +++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 122 insertions(+)
+ create mode 100644 meta-rcar-gen3/README.linaro
+
+diff --git a/meta-rcar-gen3/README.linaro b/meta-rcar-gen3/README.linaro
+new file mode 100644
+index 0000000..6542d43
+--- /dev/null
++++ b/meta-rcar-gen3/README.linaro
+@@ -0,0 +1,122 @@
++meta-rcar-gen3
++==============
++
++This layer provides that evaluation board is mounted ARM SoCs of Renesas
++Electronics, called the R-Car Generation 3. Currently, this supports
++board and the SoCs of the following:
++ - Board: Salvator-X / SoC: R8A7795 (R-Car H3), R8A7796 (R-Car M3)
++ - Board: R-Car Starter Kit premier(H3ULCB) / SoC: R8A7795
++
++Patches
++=======
++
++Please submit any patches for this layer to: takamitsu.honda.pv@renesas.com
++Please see the MAINTAINERS file for more details.
++
++Dependencies
++============
++
++This layer depends on:
++
++ URI: git://git.yoctoproject.org/poky
++ layers: meta, meta-yocto, meta-yocto-bsp
++ branch: krogoth
++
++ URI: git://git.yoctoproject.org/meta-renesas
++ layers: meta-rcar-gen3
++ branch: krogoth
++
++ URI: https://git.linaro.org/openembedded/meta-linaro.git
++ layers: meta-linaro-toolchain
++ branch: krogoth
++
++ URI: git://git.openembedded.org/meta-openembedded
++ layers: meta-oe
++ branch: krogoth
++
++Build Instructions
++==================
++
++The following instructions require a Poky installation (or equivalent).
++
++Initialize a build using the 'oe-init-build-env' script in Poky. e.g.:
++
++ $ source poky/oe-init-build-env
++
++After that, initialized configure bblayers.conf by adding meta-rcar-gen3 layer. e.g.:
++
++ BBLAYERS ?= " \
++ <path to layer>/poky/meta \
++ <path to layer>/poky/meta-yocto \
++ <path to layer>/poky/meta-yocto-bsp \
++ <path to layer>/meta-renesas/meta-rcar-gen3 \
++ <path to layer>/meta-linaro/meta-linaro-toolchain \
++ <path to layer>/meta-openembedded/meta-oe \
++ "
++
++To build a specific target BSP, configure the associated machine in local.conf:
++
++ MACHINE ??= "<supported board name>"
++
++Select the SOC
++
++ For H3: r8a7795
++ SOC_FAMILY = "r8a7795"
++
++ For M3: r8a7796
++ SOC_FAMILY = "r8a7796"
++
++Must change the package class to ipk files in local.conf:
++
++ PACKAGE_CLASSES ?= "package_ipk"
++
++Must Change the Gcc version in local.conf.
++
++ GCCVERSION="linaro-5.2"
++
++Configure for systemd init in local.conf:
++
++ DISTRO_FEATURES_append = " systemd"
++ VIRTUAL-RUNTIME_init_manager = "systemd"
++
++Build the target file system image using bitbake:
++
++ $ bitbake core-image-minimal
++
++After completing the images for the target machine will be available in the output
++directory 'tmp/deploy/images/<supported board name>'.
++
++Images generated:
++ * Image (generic Linux Kernel binary image file)
++ * Image-<machine name>.dtb (DTB for target machine)
++ * core-image-minimal-<machine name>.tar.bz2 (rootfs tar+bzip2)
++ * core-image-minimal-<machine name>.ext4 (rootfs ext4 format)
++ * core-image-minimal-<machine name>.cpio.gz (rootfs cpio+gz format)
++
++Build Instructions for SDK
++==========================
++This may be changed in the near feature. These instructions are tentative.
++
++Should define the staticdev in SDK image feature for installing the static libs
++to SDK in local.conf.
++
++ SDKIMAGE_FEATURES_append = " staticdev-pkgs"
++
++Use bitbake -c populate_sdk for generating the toolchain SDK:
++For 64-bit target SDK (aarch64):
++
++ $ bitbake core-image-minimal -c populate_sdk
++
++The SDK can be found in the output directory 'tmp/deploy/sdk'
++ * poky-glibc-x86_64-core-image-minimal-aarch64-toolchain-x.x.sh
++
++Usage of toolchain SDK:
++Install the SDK to the default: /opt/poky/x.x
++(x.x is YP version, i.e. 2.1.)
++For 64-bit target SDK:
++
++ $ sh poky-glibc-x86_64-core-image-minimal-aarch64-toolchain-x.x.sh
++
++For 64-bit application use environment script in /opt/poky/x.x
++
++ $ source /opt/poky/x.x/environment-setup-aarch64-poky-linux
+--
+1.9.1
+