rcar-gen3: linux-renesas: linux-renesas: Upgrade Linux BSP from v3.5.5 to v3.5.8

Linux BSP has been upgraded for following changes:

v3.5.8
[Audio driver]
- Fix S2R issue.

[DMA Engine driver]
- Fix S2R issue.

[USB2.0 Function]
- Fix lock variable no init

[USB Host 3.0]
- Fix support for R-Car Gen3 USB 3.0 PHY.

v3.5.7
[DMA Engine driver]
- Fix the missing spin_unlock_irqrestore.

[Display driver]
- Fix unload procedure for vsp1.

v3.5.6
[Kernel core]
- Add next-level-cache property to CA53.
- Add 12288000 for sound ADG or fix descending order of sound clock
  frequency to device tree.
- Fix the audio pingroup name mismatch between sh-pfc driver and dts
  to device tree.

[Power Management]
- Change the reading AVS value method.
- AVS7 opp table to device tree.
- The resume function for SYSC driver and always turn on
  all power domains except CPU and GPU.
- Change sequence for judgement using fixed values or Fuse values.

[Audio driver]
- There are sampling rate patterns that can not be converted by
  combination of audio clock and AK4613.
  It was confirmed this is a board specifications.
  However, they can be converted via alsalib.
- Control kctrl items acceptance anytime/runtime.
- SSI PIO adjust to 24bit mode.
- Unsupport 64kHz sampling rate and more with AK4613 on
  Salvator-X/XS board.

[Display driver]
- Setup planes before enabling CRTC to avoid flicker.
- Use DRM core's atomic commit helper.
- Fix display list put for header mode.
- Repair vblank for DRM page flips using the VSP1.
- Wait for flip completion instead of vblank in commit tail.
- Fix completed check in write back sequence.
- Fix display starting procedure and DPLL clock divider judgement.

[PTP Clock driver]
- Fix interrupt cause bit overwrite in ravb_ptp_interrupt.
- Fix result value overwrite by a return value of ravb_ptp_interrupt().
- Fix inconsistent lock state at enabling tx timestamp.

[SATA driver]
- Fix blk_get_backing_dev_info() crash using bdev->bd_queue,
  so kernel panic can be avoided in case of high load average.

[DMA Engine driver]
- Fix invalid context of sleeping function.
- Fix inconsistent lock reported by PROVE_LOCKING.

[SD/MMC]
- Add SDHI-SEQUENCER support. This is Workaround for SDHI-DMAC
  restriction of R-Car H3 Ver.1.x and R-Car M3 Ver.1.0.
- Wait for CBSY instead of SCLKDIVEN.
- Disable msleep() at start/stop of SD clock.
- Discard obsolete SDIO irqs before enabling irqs.
- Relax checking for switch errors after HS200 switch.
- Replace msleep() of 20ms or less with usleep_range().
- Fix to use pre_req and post_req only for DMA transfer.
- Fix alignment check of sg buffer.

[USB2.0 Function]
- Fix return value of usbhsg_ep_disable(),
  so the suspend procedure works
  when the g_mass_storage enables.
- Fix NULL packet received sequence.
- Fix UGCTRL2 value for R-Car Gen3.

[USB3.0 Function]
- Protect usb3_ep->started in usb3_start_pipen(),
  so kernel panic does not occur when executing iperf with g_ncm.
- Confirm an error does not occur when executing interrupt transfer
  with g_zero by correcting evaluation procedure.
- Confirm g_mass_storage is recognized by Host PC after role swap.
  Please use USB 2.0 cable, because role swap is compatible
  with High-Speed.
- Fix free size in renesas_usb3_dma_free_prd().
- Fix zlp transfer by the dmac.
- Fix pm_runtime_enable/disable and add CONFIG_PM_SLEEP
  to suspend/resume functions.

[PCIe driver]
- PCIe of R-Car Gen3 can access only 32 bit memory area at a
  certain point, even if using IPMMU. This is a H/W specifications.

Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>

0 files changed, 0 insertions, 0 deletions