diff options
author | Khang Nguyen <khang.nguyen.xv@rvc.renesas.com> | 2018-04-13 11:06:09 +0700 |
---|---|---|
committer | Thuy Tran <thuy.tran.xh@rvc.renesas.com> | 2018-04-21 09:04:25 +0700 |
commit | bf8dcc8e87213c0077af7b13f41f42f9f23370a4 (patch) | |
tree | 95f85fa50742a1f1e61d9cbfae5196734bda8121 /meta-rcar-gen3/recipes-kernel/linux/linux-renesas/defconfig | |
parent | 031cf11c6e5fee48d1f92e1af75ab7eb0ddafaa9 (diff) |
rcar-gen3: linux-renesas: Upgrade Linux BSP to v3.6.2
This commit upgrades Linux BSP to v3.6.2 for following updates:
[Kernel]
- "WARNING: possible circular locking dependency detected" occurs with
repeating reboot. However, it was false positive, and it was confirmed
that there was no problem.
- Identify R-Car M3 Ver.1.2 or later.
- Remove lossy descompress area from MMNGR node and reduce reserved area
for R-Car E3 Ebisu board.
[Power Management]
- Improve power domains always on implementation.
- Fix interrupts are not raised issue on R-Car E3.
- Update CAS source.
[Display driver]
- Add overlay layer size check.
- Fix possible crtcs for plane when using VSPDL.
[IPMMU driver]
- Add workaround for disabling uTLBs.
[MSIOF driver]
Add MSIOF module clock changing processing for R-Car Series,
3rd Generation.
[PCIe driver]
- Fix memory leak in of_pci_get_host_bridge_resources.
[Thermal driver]
- Use DIV_ROUND_CLOSEST correctly as its description.
[USB3.0 Host driver]
- Cannot Suspend to RAM when enabling USB3.0.
- Confirm recognition of USB3.0 memory through HUB for setting
/etc/udev/rules.d/99-usb.rules.
[Video Capture driver]
- Allocate a scratch buffer at stream start. Then use scratch buffer
and always run in continuous mode.
- Fix PHTW register flow below 250 mbps.
- Fix clock control flow so that the warning message
“MSTP status timeout” is not displayed and when UDS (scaling)
is executed at VIN0, a black screen does not come out.
- Fix streaming procedure when resuming.
[Audio driver]
- Playback or capture doesn’t resume after Suspend to RAM.
[USB2.0 Function]
- Kernel error occurs with rmmod of g_printer.
- The dd command error occurs with g_mass_storage.
[USB2.0 Host driver]
- When connecting USB mouse, “Bad mode in Error handler” may occur with
Suspend to RAM.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
Diffstat (limited to 'meta-rcar-gen3/recipes-kernel/linux/linux-renesas/defconfig')
-rw-r--r-- | meta-rcar-gen3/recipes-kernel/linux/linux-renesas/defconfig | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/defconfig b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/defconfig index 94c1631..c5ca754 100644 --- a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/defconfig +++ b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/defconfig @@ -5007,7 +5007,8 @@ CONFIG_OF_IOMMU=y CONFIG_IOMMU_DMA=y CONFIG_ROCKCHIP_IOMMU=y # CONFIG_EXYNOS_IOMMU is not set -# CONFIG_IPMMU_VMSA is not set +CONFIG_IPMMU_VMSA=y +CONFIG_IPMMU_VMSA_CTX_NUM=8 CONFIG_ARM_SMMU=y CONFIG_ARM_SMMU_V3=y # CONFIG_MTK_IOMMU is not set |