rcar-gen3: linux-renesas: Add support E3 and upgrade Linux BSP to v3.6.1

This commit adds support E3 and upgrades Linux BSP to v3.6.1 for
the following updates:

[Kernel]
- Add R-Car E3 support.
- Fix Gfx clock.

[Power Management]
- Register clock for all cpu nodes for R-Car H3 to device tree.
- Improve to build only when enabling RCAR_POWER_AVS.
- Update IPA for CA53, need tune "contribution" parameter.
- Fix section mismatch build warnings.
- Fix double source of drivers/soc/renesas/Kconfig.

[Display driver]
- Fix continuous mode for dual pipelines.
- Fix DISP interrupt enable order, DPPR register set order and LVDS
startup sequence.
- Fix LVDS startup on R-Car Series, 3rd Generation.
- Fix LVDS stop sequence.

[DMA Engine driver]
- Fix max_chunk_size for R-Car Series, 3rd Generation.
- Check the done lists in rcar_dmac_chan_get_residue().

[I2C driver]
- Fix the problem that the strange data transfers with DMA transmit.

[IPMMU driver]
- Fix sequence issue.

[SD/MMC driver]
- Fix handling of SET_BLOCK_COUNT for RPMB.

[USB3.0 Function]
- Fix oops in renesas_usb3_remove().
- Don't print a warning when setting link state for disabled ports.

[Video Capture driver]
- Fix transfer rate and phy register value. Add CPG reset release
procedure.
- Add bytes per line when opening device.
- Fix power management procedure when resuming.
- Add MSTP status check after CPG reset.
- Fix division procedure for __udivdi3 error.

Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>

1 files changed, 6 insertions, 3 deletions

diff --git a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/defconfig b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/defconfig
index 4f92dc4..94c1631 100644
--- a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/defconfig
+++ b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/defconfig
@@ -386,6 +386,7 @@ CONFIG_ARCH_R8A7795=y
 CONFIG_ARCH_R8A7796=y
 CONFIG_ARCH_R8A77965=y
 CONFIG_ARCH_R8A77970=y
+CONFIG_ARCH_R8A77990=y
 CONFIG_ARCH_R8A77995=y
 CONFIG_ARCH_STRATIX10=y
 CONFIG_ARCH_TEGRA=y
@@ -2585,6 +2586,7 @@ CONFIG_PINCTRL_SH_PFC=y
 CONFIG_PINCTRL_PFC_R8A7795=y
 CONFIG_PINCTRL_PFC_R8A7796=y
 CONFIG_PINCTRL_PFC_R8A77965=y
+CONFIG_PINCTRL_PFC_R8A77990=y
 CONFIG_PINCTRL_PFC_R8A77995=y
 # CONFIG_PINCTRL_SPRD is not set
 CONFIG_PINCTRL_SUNXI=y
@@ -2697,8 +2699,7 @@ CONFIG_GPIO_MAX77620=y
 # USB GPIO expanders
 #
 # CONFIG_W1 is not set
-CONFIG_POWER_AVS=y
-# CONFIG_ROCKCHIP_IODOMAIN is not set
+# CONFIG_POWER_AVS is not set
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_BRCMSTB=y
 # CONFIG_POWER_RESET_GPIO is not set
@@ -4932,6 +4933,7 @@ CONFIG_CLK_R8A7795=y
 CONFIG_CLK_R8A7796=y
 CONFIG_CLK_R8A77965=y
 CONFIG_CLK_R8A77970=y
+CONFIG_CLK_R8A77990=y
 CONFIG_CLK_R8A77995=y
 CONFIG_CLK_RCAR_GEN3_CPG=y
 # CONFIG_CLK_RCAR_USB2_CLOCK_SEL is not set
@@ -5024,7 +5026,6 @@ CONFIG_RPMSG=y
 # CONFIG_RPMSG_QCOM_GLINK_RPM is not set
 # CONFIG_RPMSG_QCOM_GLINK_SMEM is not set
 CONFIG_RPMSG_QCOM_SMD=y
-CONFIG_RPMSG_VIRTIO=y
 
 #
 # SOC (System On Chip) specific Drivers
@@ -5066,10 +5067,12 @@ CONFIG_SYSC_R8A7795=y
 CONFIG_SYSC_R8A7796=y
 CONFIG_SYSC_R8A77965=y
 CONFIG_SYSC_R8A77970=y
+CONFIG_SYSC_R8A77990=y
 CONFIG_SYSC_R8A77995=y
 CONFIG_RST_RCAR=y
 CONFIG_SYSC_RCAR=y
 CONFIG_RCAR_THERMAL_EMS=y
+CONFIG_RCAR_POWER_AVS=y
 CONFIG_ROCKCHIP_GRF=y
 CONFIG_ROCKCHIP_PM_DOMAINS=y
 CONFIG_SOC_SAMSUNG=y