diff options
4 files changed, 29 insertions, 101 deletions
diff --git a/meta-rcar-gen3-adas/conf/layer.conf b/meta-rcar-gen3-adas/conf/layer.conf index a3abc9e..765cb0e 100644 --- a/meta-rcar-gen3-adas/conf/layer.conf +++ b/meta-rcar-gen3-adas/conf/layer.conf @@ -45,6 +45,7 @@ IMAGE_INSTALL_append_rcar-gen3 = " \ pulseaudio-module-cli \ pulseaudio-module-remap-sink \ pulseaudio-module-remap-source \ + gstreamer1.0-plugins-good-pulse \ " # Radio packages @@ -60,6 +61,7 @@ IMAGE_INSTALL_append_rcar-gen3 += " \ pulseaudio-module-bluez5-discover \ pulseaudio-module-bluetooth-discover \ pulseaudio-module-bluetooth-policy \ + ofono \ " DISTRO_FEATURES_remove="x11" diff --git a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/system-mch.pa b/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/system-mch.pa deleted file mode 100644 index 327bb44..0000000 --- a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/system-mch.pa +++ /dev/null @@ -1,86 +0,0 @@ -#!/usr/bin/pulseaudio -nF -# -# This file is part of PulseAudio. -# -# PulseAudio is free software; you can redistribute it and/or modify it -# under the terms of the GNU Lesser General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# PulseAudio is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software Foundation, -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - -# This startup script is used only if PulseAudio is started in system -# mode. - -## use static load order to prevent pulseaudio to auto probe MOST devices -## MOST drivers does not like how pulse probing it and crashes system -## PCM3168A card -load-module module-alsa-sink sink_name=pcm3168a_output device=hw:pcm3168a format=s24-32le channels=8 rate=48000 channel_map=surround-71 -load-module module-alsa-source source_name=pcm3168a_input device=hw:pcm3168a format=s24-32le channels=8 rate=48000 channel_map=surround-71 -## Onboard sound -## use ALSA card plugin to run UCM and initial controls setup -load-module module-alsa-card device_id=1 rate=48000 use_ucm=1 tsched=yes -## Radio input -load-module module-alsa-source source_name=radio device=hw:radio channels=2 rate=48000 - -### Load several protocols -.ifexists module-esound-protocol-unix.so -load-module module-esound-protocol-unix -.endif -load-module module-native-protocol-unix auth-anonymous=1 - -### Automatically restore the volume of streams and devices -load-module module-stream-restore -load-module module-device-restore - -### Automatically restore the default sink/source when changed by the user -### during runtime -### NOTE: This should be loaded as early as possible so that subsequent modules -### that look up the default sink/source get the right value -load-module module-default-device-restore - -### Automatically move streams to the default sink if the sink they are -### connected to dies, similar for sources -load-module module-rescue-streams - -### Make sure we always have a sink around, even if it is a null sink. -load-module module-always-sink - -### Automatically suspend sinks/sources that become idle for too long -# load-module module-suspend-on-idle - -### Enable positioned event sounds -# load-module module-position-event-sounds - -### Automatically load driver modules for Bluetooth hardware -.ifexists module-bluetooth-policy.so -load-module module-bluetooth-policy -.endif - -.ifexists module-bluetooth-discover.so -load-module module-bluetooth-discover -.endif - -### Split multichannel card output to Stereo and 5.1 -# load-module module-remap-sink sink_name=Surround51 remix=no master=pcm3168a_output channels=6 master_channel_map=front-left,front-right,rear-left,rear-right,front-center,lfe channel_map=front-left,front-right,rear-left,rear-right,front-center,lfe -# load-module module-remap-sink sink_name=StereoOut remix=no master=pcm3168a_output channels=2 master_channel_map=side-left,side-right channel_map=front-left,front-right - -### Split multichannel card input to 4 x microphone/line-ins -# load-module module-remap-source source_name=mic0 remix=no master=pcm3168a_input channels=2 master_channel_map=front-left,front-right channel_map=front-left,front-right -# load-module module-remap-source source_name=mic1 remix=no master=pcm3168a_input channels=2 master_channel_map=rear-left,rear-right channel_map=front-left,front-right -# load-module module-remap-source source_name=mic2 remix=no master=pcm3168a_input channels=2 master_channel_map=front-center,lfe channel_map=front-left,front-right -# load-module module-remap-source source_name=mic3 remix=no master=pcm3168a_input channels=2 master_channel_map=side-left,side-right channel_map=front-left,front-right - -### Set default source and sink to multichannel soundcard -# set-default-sink Surround51 -# set-default-source mic0 - -set-default-sink pcm3168a_output -set-default-source pcm3168a_input
\ No newline at end of file diff --git a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/system.pa b/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/system.pa index f88fc8e..3a1be43 100644 --- a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/system.pa +++ b/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/system.pa @@ -19,13 +19,16 @@ # This startup script is used only if PulseAudio is started in system # mode. -### Automatically load driver modules depending on the hardware available -.ifexists module-udev-detect.so -load-module module-udev-detect -.else -### Use the static hardware detection module (for systems that lack udev/hal support) -load-module module-detect -.endif +## use static load order to prevent pulseaudio to auto probe MOST devices +## MOST drivers does not like how pulse probing it and crashes system +## PCM3168A card (Kingfisher only) +load-module module-alsa-sink sink_name=pcm3168a_output device=hw:pcm3168a format=s24-32le channels=8 rate=48000 channel_map=surround-71 +load-module module-alsa-source source_name=pcm3168a_input device=hw:pcm3168a format=s24-32le channels=8 rate=48000 channel_map=surround-71 +## Onboard sound (All R-Car 3 boards) +## use ALSA card plugin to run UCM and initial controls setup +load-module module-alsa-card device_id=ak4613 rate=48000 use_ucm=1 tsched=yes sink_name=ak4613_output source_name=ak4613_input +## Radio input (Kingfisher only) +load-module module-alsa-source source_name=radio device=hw:radio channels=2 rate=48000 ### Load several protocols .ifexists module-esound-protocol-unix.so @@ -55,3 +58,18 @@ load-module module-always-sink ### Enable positioned event sounds # load-module module-position-event-sounds + +### Automatically load driver modules for Bluetooth hardware +.ifexists module-bluetooth-policy.so +load-module module-bluetooth-policy +.endif + +.ifexists module-bluetooth-discover.so +load-module module-bluetooth-discover +.endif + +set-default-sink ak4613_output +set-default-source ak4613_input +# For Kingfisher board set default source and sink to multichannel soundcard +set-default-sink pcm3168a_output +set-default-source pcm3168a_input diff --git a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/pulseaudio_8.0.bbappend b/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/pulseaudio_8.0.bbappend index e6c1441..705c781 100644 --- a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/pulseaudio_8.0.bbappend +++ b/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/pulseaudio_8.0.bbappend @@ -7,7 +7,6 @@ SRC_URI_append_rcar-gen3 = " \ file://rsnddai0ak4613h.conf \ file://hifi \ file://system.pa \ - file://system-mch.pa \ file://daemon.conf \ file://pulseaudio-bluetooth.conf \ " @@ -17,11 +16,6 @@ inherit update-rc.d INITSCRIPT_NAME = "pulseaudio" INITSCRIPT_PARAMS = "defaults 30" -PA_SYSTEM_PA = \ - '${@ "system-mch.pa" \ - if 'kingfisher' in '${DISTRO_FEATURES}' \ - else "system.pa"}' - do_install_append_rcar-gen3() { install -d ${D}/etc/init.d install -d ${D}/etc/pulse @@ -29,7 +23,7 @@ do_install_append_rcar-gen3() { install -m 0755 ${WORKDIR}/pulseaudio.init ${D}/etc/init.d/pulseaudio - install -m 0644 ${WORKDIR}/${PA_SYSTEM_PA} ${D}/etc/pulse/system.pa + install -m 0644 ${WORKDIR}/system.pa ${D}/etc/pulse/system.pa install -m 0644 ${WORKDIR}/daemon.conf ${D}/etc/pulse/daemon.conf install -m 0644 ${WORKDIR}/rsnddai0ak4613h.conf ${D}${datadir}/alsa/ucm/rsnddai0ak4613h/rsnddai0ak4613h.conf @@ -39,7 +33,7 @@ do_install_append_rcar-gen3() { install -m 644 ${WORKDIR}/pulseaudio-bluetooth.conf ${D}/${sysconfdir}/dbus-1/system.d/ } -FILES_${PN} += " \ +FILES_${PN}-server += " \ ${datadir}/alsa/ucm \ ${datadir}/dbus-1/ \ " |