aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/default.pa149
-rw-r--r--meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/hifi10
-rwxr-xr-xmeta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/pulseaudio.init2
-rw-r--r--meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/system.pa13
4 files changed, 15 insertions, 159 deletions
diff --git a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/default.pa b/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/default.pa
deleted file mode 100644
index 8f1570f..0000000
--- a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/default.pa
+++ /dev/null
@@ -1,149 +0,0 @@
-#!/usr/bin/pulseaudio -nF
-#
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
-
-# This startup script is used only if PulseAudio is started per-user
-# (i.e. not in system mode)
-
-.nofail
-
-### Load something into the sample cache
-#load-sample-lazy x11-bell /usr/share/sounds/freedesktop/stereo/bell.oga
-#load-sample-lazy pulse-hotplug /usr/share/sounds/freedesktop/stereo/device-added.oga
-#load-sample-lazy pulse-coldplug /usr/share/sounds/freedesktop/stereo/device-added.oga
-#load-sample-lazy pulse-access /usr/share/sounds/freedesktop/stereo/message.oga
-
-.fail
-
-### Automatically restore the volume of streams and devices
-load-module module-device-restore
-load-module module-stream-restore
-load-module module-card-restore
-
-### Automatically augment property information from .desktop files
-### stored in /usr/share/application
-load-module module-augment-properties
-
-### Should be after module-*-restore but before module-*-detect
-load-module module-switch-on-port-available
-
-### Load audio drivers statically
-### (it's probably better to not load these drivers manually, but instead
-### use module-udev-detect -- see below -- for doing this automatically)
-#load-module module-alsa-sink
-#load-module module-alsa-source device=hw:0,0
-#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
-#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
-#load-module module-null-sink
-#load-module module-pipe-sink
-
-### Automatically load driver modules depending on the hardware available
-.ifexists module-udev-detect.so
-load-module module-udev-detect
-.else
-### Use the static hardware detection module (for systems that lack udev support)
-load-module module-detect
-.endif
-
-### Automatically connect sink and source if JACK server is present
-.ifexists module-jackdbus-detect.so
-.nofail
-load-module module-jackdbus-detect channels=2
-.fail
-.endif
-
-### Automatically load driver modules for Bluetooth hardware
-.ifexists module-bluetooth-policy.so
-load-module module-bluetooth-policy
-.endif
-
-.ifexists module-bluetooth-discover.so
-load-module module-bluetooth-discover
-.endif
-
-### Load several protocols
-.ifexists module-esound-protocol-unix.so
-load-module module-esound-protocol-unix
-.endif
-load-module module-native-protocol-unix
-
-### Network access (may be configured with paprefs, so leave this commented
-### here if you plan to use paprefs)
-#load-module module-esound-protocol-tcp
-#load-module module-native-protocol-tcp
-#load-module module-zeroconf-publish
-
-### Load the RTP receiver module (also configured via paprefs, see above)
-#load-module module-rtp-recv
-
-### Load the RTP sender module (also configured via paprefs, see above)
-#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
-#load-module module-rtp-send source=rtp.monitor
-
-### Load additional modules from GConf settings. This can be configured with the paprefs tool.
-### Please keep in mind that the modules configured by paprefs might conflict with manually
-### loaded modules.
-.ifexists module-gconf.so
-.nofail
-load-module module-gconf
-.fail
-.endif
-
-### Automatically restore the default sink/source when changed by the user
-### during runtime
-### NOTE: This should be loaded as early as possible so that subsequent modules
-### that look up the default sink/source get the right value
-load-module module-default-device-restore
-
-### Automatically move streams to the default sink if the sink they are
-### connected to dies, similar for sources
-load-module module-rescue-streams
-
-### Make sure we always have a sink around, even if it is a null sink.
-load-module module-always-sink
-
-### Honour intended role device property
-load-module module-intended-roles
-
-### Automatically suspend sinks/sources that become idle for too long
-load-module module-suspend-on-idle
-
-### If autoexit on idle is enabled we want to make sure we only quit
-### when no local session needs us anymore.
-.ifexists module-console-kit.so
-load-module module-console-kit
-.endif
-.ifexists module-systemd-login.so
-load-module module-systemd-login
-.endif
-
-### Enable positioned event sounds
-load-module module-position-event-sounds
-
-### Cork music/video streams when a phone stream is active
-load-module module-role-cork
-
-### Modules to allow autoloading of filters (such as echo cancellation)
-### on demand. module-filter-heuristics tries to determine what filters
-### make sense, and module-filter-apply does the heavy-lifting of
-### loading modules and rerouting streams.
-load-module module-filter-heuristics
-load-module module-filter-apply
-
-
-### Make some devices default
-#set-default-sink output
-#set-default-source input
diff --git a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/hifi b/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/hifi
index b249767..e897b98 100644
--- a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/hifi
+++ b/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/hifi
@@ -3,7 +3,7 @@
SectionVerb {
EnableSequence [
exec "echo Setting defaults for ak4613"
- cdev "hw:0"
+ cdev "hw:ak4613"
cset "name='DVC Out Playback Volume' 30%"
cset "name='DVC In Capture Volume' 10%"
]
@@ -20,11 +20,11 @@ SectionDevice."Headphone".0 {
}
EnableSequence [
- cdev "hw:0"
+ cdev "hw:ak4613"
cset "name='DVC Out Playback Volume' 30%"
]
DisableSequence [
- cdev "hw:0"
+ cdev "hw:ak4613"
cset "name='DVC Out Playback Volume' 0%"
]
}
@@ -37,12 +37,12 @@ SectionDevice."Mic".0 {
}
EnableSequence [
- cdev "hw:0"
+ cdev "hw:ak4613"
cset "name='DVC In Capture Volume' 10%"
]
DisableSequence [
- cdev "hw:0"
+ cdev "hw:ak4613"
cset "name='DVC In Capture Volume' 0%"
]
}
diff --git a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/pulseaudio.init b/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/pulseaudio.init
index 4f0a03f..db8f965 100755
--- a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/pulseaudio.init
+++ b/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/pulseaudio.init
@@ -26,7 +26,7 @@ done
case "$1" in
start)
echo "Starting pulseaudio"
- start-stop-daemon -S -x pulseaudio -- -D --system --disallow-exit
+ start-stop-daemon -S -x pulseaudio -- -D --system --disallow-exit --log-level=3 --log-target=file:/var/log/pa.log
;;
stop)
diff --git a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/system.pa b/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/system.pa
index 47ef8c3..963a7c9 100644
--- a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/system.pa
+++ b/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/system.pa
@@ -21,14 +21,18 @@
## use static load order to prevent pulseaudio to auto probe MOST devices
## MOST drivers does not like how pulse probing it and crashes system
-## PCM3168A card (Kingfisher only)
-load-module module-alsa-sink sink_name=pcm3168a_output device=hw:pcm3168a format=s24-32le channels=8 rate=48000 channel_map=surround-71
-load-module module-alsa-source source_name=pcm3168a_input device=hw:pcm3168a format=s24-32le channels=8 rate=48000 channel_map=surround-71
+
## Onboard sound (All R-Car 3 boards)
## use ALSA card plugin to run UCM and initial controls setup
+.fail
load-module module-alsa-card device_id=ak4613 rate=48000 use_ucm=1 tsched=yes sink_name=ak4613_output source_name=ak4613_input
+
+## Kingfisher specific devices (may not present)
+.nofail
+## PCM3168A card (Kingfisher only)
+load-module module-alsa-card device_id=pcm3168a sink_name=pcm3168a_output source_name=pcm3168a_input format=s24-32le rate=48000
## Radio input (Kingfisher only)
-load-module module-alsa-source source_name=radio device=hw:radio channels=2 rate=48000
+load-module module-alsa-card device_id=radio source_name=radio rate=48000
## WL18xx PCM interface (Kingfisher only)
load-module module-alsa-card device_id=wl18xx rate=48000 sink_name=bt_output source_name=bt_input
@@ -72,6 +76,7 @@ load-module module-bluetooth-discover headset=auto
set-default-sink ak4613_output
set-default-source ak4613_input
+
# For Kingfisher board set default source and sink to multichannel soundcard
set-default-sink pcm3168a_output
set-default-source pcm3168a_input