diff options
| -rw-r--r-- | meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch | 5841 | ||||
| -rw-r--r-- | meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas_4.9.bbappend | 4 |
2 files changed, 2390 insertions, 3455 deletions
diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch index 75bf843..14a7b80 100644 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch @@ -14,23 +14,25 @@ H3ULCB.HAD board on R8A7795 SoC Kingfisher board on R8A7795 ES1.x SoC Kingfisher board on R8A7795 SoC Kingfisher board on R8A7796 SoC +Kingfisher board on R8A7797 SoC Videobox board on R8A7795 ES1.x SoC Videobox board on R8A7795 SoC Eagle board on R8A7797 SoC V3MSK board on R8A7797 SoC -Kingfisher board on R8A7797 SoC -Videobox board on R8A7797 SoC +Videobox Mini board on R8A7795 ES1.x SoC +Videobox Mini board on R8A7795 SoC +Videobox Mini board on R8A7797 SoC Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> --- - arch/arm64/boot/dts/renesas/Makefile | 17 + + arch/arm64/boot/dts/renesas/Makefile | 18 + arch/arm64/boot/dts/renesas/legacy/Makefile | 8 + .../renesas/legacy/r8a7795-es1-h3ulcb-kf-v0.dts | 1710 +++++++++++++++++++ .../renesas/legacy/r8a7795-es1-h3ulcb-kf-v1.dts | 441 +++++ .../dts/renesas/legacy/r8a7795-h3ulcb-kf-v0.dts | 1724 +++++++++++++++++++ - .../dts/renesas/legacy/r8a7795-h3ulcb-kf-v1.dts | 465 +++++ - .../dts/renesas/legacy/r8a7796-m3ulcb-kf-v0.dts | 1214 +++++++++++++ - .../dts/renesas/legacy/r8a7796-m3ulcb-kf-v1.dts | 465 +++++ + .../dts/renesas/legacy/r8a7795-h3ulcb-kf-v1.dts | 465 ++++++ + .../dts/renesas/legacy/r8a7796-m3ulcb-kf-v0.dts | 1214 ++++++++++++++ + .../dts/renesas/legacy/r8a7796-m3ulcb-kf-v1.dts | 465 ++++++ .../dts/renesas/legacy/r8a7797-v3msk-kf-v0.dts | 20 + .../boot/dts/renesas/legacy/ulcb-kf-cmos.dtsi | 75 + .../arm64/boot/dts/renesas/legacy/ulcb-kf-rpi.dtsi | 77 + @@ -38,29 +40,33 @@ Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> .../dts/renesas/r8a7795-es1-h3ulcb-had-beta.dts | 23 + .../boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi | 225 +++ .../boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts | 39 + - .../boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts | 1787 ++++++++++++++++++++ - .../boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts | 546 ++++++ - .../dts/renesas/r8a7795-es1-salvator-x-view.dts | 552 ++++++ + .../boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts | 69 + + .../boot/dts/renesas/r8a7795-es1-h3ulcb-vbm.dts | 26 + + .../boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts | 546 +++++++ + .../dts/renesas/r8a7795-es1-salvator-x-view.dts | 552 +++++++ .../boot/dts/renesas/r8a7795-h3ulcb-had-alfa.dts | 22 + .../boot/dts/renesas/r8a7795-h3ulcb-had-beta.dts | 23 + .../arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi | 219 +++ arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts | 39 + - arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts | 1787 ++++++++++++++++++++ - .../arm64/boot/dts/renesas/r8a7795-h3ulcb-view.dts | 546 ++++++ - .../boot/dts/renesas/r8a7795-salvator-x-view.dts | 552 ++++++ + arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts | 68 + + arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vbm.dts | 26 + + .../arm64/boot/dts/renesas/r8a7795-h3ulcb-view.dts | 546 +++++++ + .../boot/dts/renesas/r8a7795-salvator-x-view.dts | 552 +++++++ arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts | 40 + .../arm64/boot/dts/renesas/r8a7796-m3ulcb-view.dts | 287 ++++ .../boot/dts/renesas/r8a7796-salvator-x-view.dts | 318 ++++ - arch/arm64/boot/dts/renesas/r8a7797-eagle.dts | 561 ++++++ + arch/arm64/boot/dts/renesas/r8a7797-eagle.dts | 561 +++++++ arch/arm64/boot/dts/renesas/r8a7797-v3msk-kf.dts | 578 +++++++ - arch/arm64/boot/dts/renesas/r8a7797-v3msk-vb.dts | 498 ++++++ + arch/arm64/boot/dts/renesas/r8a7797-v3msk-vbm.dts | 498 ++++++ arch/arm64/boot/dts/renesas/r8a7797-v3msk.dts | 320 ++++ arch/arm64/boot/dts/renesas/ulcb-kf-cn11.dtsi | 518 ++++++ arch/arm64/boot/dts/renesas/ulcb-kf-most.dtsi | 30 + arch/arm64/boot/dts/renesas/ulcb-kf-sd3.dtsi | 46 + arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 1529 +++++++++++++++++ arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi | 515 ++++++ - 37 files changed, 17838 insertions(+) + arch/arm64/boot/dts/renesas/ulcb-vb.dtsi | 1726 ++++++++++++++++++++ + arch/arm64/boot/dts/renesas/ulcb-vbm.dtsi | 557 +++++++ + 41 files changed, 16737 insertions(+) create mode 100644 arch/arm64/boot/dts/renesas/legacy/Makefile create mode 100644 arch/arm64/boot/dts/renesas/legacy/r8a7795-es1-h3ulcb-kf-v0.dts create mode 100644 arch/arm64/boot/dts/renesas/legacy/r8a7795-es1-h3ulcb-kf-v1.dts @@ -76,6 +82,7 @@ Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts + create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vbm.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x-view.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-alfa.dts @@ -83,6 +90,7 @@ Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts + create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vbm.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-view.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-salvator-x-view.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts @@ -90,19 +98,21 @@ Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-salvator-x-view.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7797-eagle.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7797-v3msk-kf.dts - create mode 100644 arch/arm64/boot/dts/renesas/r8a7797-v3msk-vb.dts + create mode 100644 arch/arm64/boot/dts/renesas/r8a7797-v3msk-vbm.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7797-v3msk.dts create mode 100644 arch/arm64/boot/dts/renesas/ulcb-kf-cn11.dtsi create mode 100644 arch/arm64/boot/dts/renesas/ulcb-kf-most.dtsi create mode 100644 arch/arm64/boot/dts/renesas/ulcb-kf-sd3.dtsi create mode 100644 arch/arm64/boot/dts/renesas/ulcb-kf.dtsi create mode 100644 arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi + create mode 100644 arch/arm64/boot/dts/renesas/ulcb-vb.dtsi + create mode 100644 arch/arm64/boot/dts/renesas/ulcb-vbm.dtsi diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile -index 32fb4d9..52d783b 100644 +index 32fb4d9..26d258d2 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile -@@ -4,5 +4,22 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb r8a7795-es1-h3ulcb.dtb +@@ -4,5 +4,23 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb r8a7795-es1-h3ulcb.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb @@ -115,10 +125,11 @@ index 32fb4d9..52d783b 100644 +dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-had-alfa.dtb r8a7795-h3ulcb-had-beta.dtb r8a7795-es1-h3ulcb-had-alfa.dtb r8a7795-es1-h3ulcb-had-beta.dtb +dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb r8a7795-es1-h3ulcb-kf.dtb +dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-vb.dtb r8a7795-es1-h3ulcb-vb.dtb ++dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-vbm.dtb r8a7795-es1-h3ulcb-vbm.dtb +dtb-$(CONFIG_ARCH_R8A7797) += r8a7797-eagle.dtb +dtb-$(CONFIG_ARCH_R8A7797) += r8a7797-v3msk.dtb +dtb-$(CONFIG_ARCH_R8A7797) += r8a7797-v3msk-kf.dtb -+dtb-$(CONFIG_ARCH_R8A7797) += r8a7797-v3msk-vb.dtb ++dtb-$(CONFIG_ARCH_R8A7797) += r8a7797-v3msk-vbm.dtb + +# ADAS legacy boards +subdir-y := legacy @@ -6719,10 +6730,10 @@ index 0000000..849afae +//#include "ulcb-kf-cn11.dtsi" diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts new file mode 100644 -index 0000000..e5734aa +index 0000000..549a717 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts -@@ -0,0 +1,1787 @@ +@@ -0,0 +1,69 @@ +/* + * Device Tree Source for the H3ULCB Videobox board on r8a7795 ES1.x + * @@ -6735,170 +6746,11 @@ index 0000000..e5734aa + */ + +#include "r8a7795-es1-h3ulcb.dts" ++#include "ulcb-vb.dtsi" + +/ { + model = "Renesas H3ULCB Videobox board based on r8a7795"; + -+ leds { -+ compatible = "gpio-leds"; -+ -+ led5 { -+ gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; -+ }; -+ led6 { -+ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; -+ }; -+ /* D13 - status 0 */ -+ led_ext00 { -+ gpios = <&gpio_ext_led 0 GPIO_ACTIVE_LOW>; -+ /* linux,default-trigger = "heartbeat"; */ -+ }; -+ /* D14 - status 1 */ -+ led_ext01 { -+ gpios = <&gpio_ext_led 1 GPIO_ACTIVE_LOW>; -+ /* linux,default-trigger = "mmc1"; */ -+ }; -+ /* D16 - HDMI1 */ -+ led_ext02 { -+ gpios = <&gpio_ext_led 2 GPIO_ACTIVE_LOW>; -+ }; -+ /* D18 - HDMI0 */ -+ led_ext03 { -+ gpios = <&gpio_ext_led 3 GPIO_ACTIVE_LOW>; -+ }; -+ /* D20 - USB3.0 - 0.1 */ -+ led_ext04 { -+ gpios = <&gpio_ext_led 4 GPIO_ACTIVE_LOW>; -+ }; -+ /* D21 - USB3.0 - 0.2 */ -+ led_ext05 { -+ gpios = <&gpio_ext_led 5 GPIO_ACTIVE_LOW>; -+ }; -+ /* D24 - USB3.0 - 1.1 */ -+ led6_ext06 { -+ gpios = <&gpio_ext_led 6 GPIO_ACTIVE_LOW>; -+ }; -+ /* D25 - USB3.0 - 1.2 */ -+ led_ext07 { -+ gpios = <&gpio_ext_led 7 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ snd_clk: snd_clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <24576000>; -+ clock-output-names = "scki"; -+ }; -+ -+ vccq_sdhi3: regulator@5 { -+ compatible = "regulator-fixed"; -+ -+ regulator-name = "SDHI3 VccQ"; -+ /* external voltage translator to 1.8V */ -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ }; -+ -+ fpdlink_switch: regulator@8 { -+ compatible = "regulator-fixed"; -+ regulator-name = "fpdlink_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio1 20 0>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ -+ hub_reset: regulator@9 { -+ compatible = "regulator-fixed"; -+ regulator-name = "hub_reset"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio5 5 0>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ -+ hub_power: regulator@10 { -+ compatible = "regulator-fixed"; -+ regulator-name = "hub_power"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ gpio = <&gpio6 28 0>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ -+ /delete-node/sound; -+ -+ rsnd_ak4613: sound@0 { -+ pinctrl-0 = <&sound_0_pins>; -+ pinctrl-names = "default"; -+ compatible = "simple-audio-card"; -+ -+ simple-audio-card,format = "left_j"; -+ simple-audio-card,name = "ak4613"; -+ -+ simple-audio-card,bitclock-master = <&sndcpu>; -+ simple-audio-card,frame-master = <&sndcpu>; -+ -+ sndcpu: simple-audio-card,cpu@1 { -+ sound-dai = <&rcar_sound>; -+ }; -+ -+ sndcodec: simple-audio-card,codec@1 { -+ sound-dai = <&ak4613>; -+ }; -+ }; -+ -+ lvds-encoder { -+ compatible = "thine,thc63lvdm83d"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ port@0 { -+ reg = <0>; -+ lvds_enc_in: endpoint { -+ remote-endpoint = <&du_out_lvds0>; -+ }; -+ }; -+ port@1 { -+ reg = <1>; -+ lvds_enc_out: endpoint { -+ remote-endpoint = <&lvds_in>; -+ }; -+ }; -+ }; -+ }; -+ -+ lvds { -+ compatible = "lvds-connector"; -+ -+ width-mm = <210>; -+ height-mm = <158>; -+ -+ panel-timing { -+ /* 1280x800 @60Hz */ -+ clock-frequency = <65000000>; -+ hactive = <1280>; -+ vactive = <800>; -+ hsync-len = <40>; -+ hfront-porch = <80>; -+ hback-porch = <40>; -+ vfront-porch = <14>; -+ vback-porch = <14>; -+ vsync-len = <4>; -+ }; -+ -+ port { -+ lvds_in: endpoint { -+ remote-endpoint = <&lvds_enc_out>; -+ }; -+ }; -+ }; -+ + hdmi1-out { + compatible = "hdmi-connector"; + type = "a"; @@ -6909,76 +6761,10 @@ index 0000000..e5734aa + }; + }; + }; -+ -+ excan_ref_clk: excan-ref-clock { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <16000000>; -+ }; -+ -+ radio: si468x@0 { -+ compatible = "si,si468x-pcm"; -+ status = "okay"; -+ -+ #sound-dai-cells = <0>; -+ }; -+ -+ spi_gpio_sw { -+ compatible = "spi-gpio"; -+ #address-cells = <0x1>; -+ #size-cells = <0x0>; -+ gpio-sck = <&gpio0 8 GPIO_ACTIVE_HIGH>; -+ gpio-miso = <&gpio0 10 GPIO_ACTIVE_HIGH>; -+ gpio-mosi = <&gpio0 11 GPIO_ACTIVE_HIGH>; -+ cs-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; -+ num-chipselects = <1>; -+ -+ spidev: spidev@0 { -+ compatible = "spidev", "spi-gpio"; -+ reg = <0>; -+ spi-max-frequency = <25000000>; -+ spi-cpha; -+ spi-cpol; -+ }; -+ }; -+ -+ spi_gpio_can { -+ compatible = "spi-gpio"; -+ #address-cells = <0x1>; -+ #size-cells = <0x0>; -+ gpio-sck = <&gpio1 2 GPIO_ACTIVE_HIGH>; -+ gpio-miso = <&gpio1 3 GPIO_ACTIVE_HIGH>; -+ gpio-mosi = <&gpio1 1 GPIO_ACTIVE_HIGH>; -+ cs-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH -+ &gpio1 4 GPIO_ACTIVE_HIGH>; -+ num-chipselects = <2>; -+ -+ spican0: spidev@0 { -+ compatible = "microchip,mcp2515"; -+ reg = <0>; -+ clocks = <&excan_ref_clk>; -+ interrupt-parent = <&gpio0>; -+ interrupts = <15 GPIO_ACTIVE_LOW>; -+ spi-max-frequency = <10000000>; -+ }; -+ spican1: spidev@1 { -+ compatible = "microchip,mcp2515"; -+ reg = <1>; -+ clocks = <&excan_ref_clk>; -+ interrupt-parent = <&gpio1>; -+ interrupts = <5 GPIO_ACTIVE_LOW>; -+ spi-max-frequency = <10000000>; -+ }; -+ }; +}; + +&du { + ports { -+ port@1 { -+ endpoint { -+ remote-endpoint = <&rcar_dw_hdmi0_in>; -+ }; -+ }; + port@2 { + endpoint { + remote-endpoint = <&rcar_dw_hdmi1_in>; @@ -6998,6 +6784,7 @@ index 0000000..e5734aa + ports { + #address-cells = <1>; + #size-cells = <0>; ++ + port@0 { + reg = <0>; + rcar_dw_hdmi1_in: endpoint { @@ -7013,1503 +6800,41 @@ index 0000000..e5734aa + }; +}; + -+&pfc { -+ hscif4_pins: hscif4 { -+ groups = "hscif4_data_a", "hscif4_ctrl"; -+ function = "hscif4"; -+ }; -+ -+ sdhi3_pins_3v3: sd3_3v3 { -+ groups = "sdhi3_data4", "sdhi3_ctrl"; -+ function = "sdhi3"; -+ power-source = <3300>; -+ }; -+ -+ /delete-node/sound; -+ -+ sound_0_pins: sound1 { -+ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; -+ function = "ssi"; -+ }; -+ -+ usb0_pins: usb0 { -+ groups = "usb0"; -+ function = "usb0"; -+ }; -+ -+ can0_pins: can0 { -+ groups = "can0_data_a"; -+ function = "can0"; -+ }; -+ -+ can1_pins: can1 { -+ groups = "can1_data"; -+ function = "can1"; -+ }; -+ -+ canfd0_pins: canfd0 { -+ groups = "canfd0_data_a"; -+ function = "canfd0"; -+ }; -+ -+ canfd1_pins: canfd1 { -+ groups = "canfd1_data"; -+ function = "canfd1"; -+ }; -+}; -+ -+&gpio0 { -+ video_a_irq { -+ gpio-hog; -+ gpios = <12 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-A irq"; -+ }; -+ -+ video_b_irq { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-B irq"; -+ }; -+ -+ video_c_irq { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-C irq"; -+ }; -+}; -+ -+&gpio1 { -+ gpioext_4_22_irq { -+ gpio-hog; -+ gpios = <25 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "0x22@i2c4 irq"; -+ }; -+ pcie_disable { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "mPCIe W_DISABLE"; -+ }; -+ m2_sleep { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "M.2 SLEEP#"; -+ }; -+ m2_pres { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "M.2 Present"; -+ }; -+ m2_pcie_det { -+ gpio-hog; -+ gpios = <18 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "M.2 PCIe detected"; -+ }; -+ m2_usb_det { -+ gpio-hog; -+ gpios = <19 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "M.2 USB30 detected"; -+ }; -+ m2_usb_det { -+ gpio-hog; -+ gpios = <27 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "M.2 SSD detected"; -+ }; -+ eth_phy_reset { -+ gpio-hog; -+ gpios = <16 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "BR phy reset"; -+ }; -+ eth_sw_reset { -+ gpio-hog; -+ gpios = <17 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "BR switch reset"; -+ }; -+}; -+ -+&gpio2 { -+ m2_wake { -+ gpio-hog; -+ gpios = <1 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "M.2 WAKE#"; -+ }; -+ m2_pcie_en { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "M.2 PCIe enable"; -+ }; -+}; -+ -+&gpio3 { -+ m2_power_off { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "M.2 FULL_CARD_POWER_OFF#"; -+ }; -+}; -+ -+&gpio6 { -+ pcie_wake { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "mPCIe WAKE#"; -+ }; -+ pcie_clkreq { -+ gpio-hog; -+ gpios = <10 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "mPCIe CLKREQ#"; -+ }; -+ m2_rst { -+ gpio-hog; -+ gpios = <21 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "M.2 RESET#"; -+ }; -+}; -+ -+&hscif4 { -+ pinctrl-0 = <&hscif4_pins>; -+ pinctrl-names = "default"; -+ uart-has-rtscts; -+ -+ status = "okay"; -+}; -+ -+&i2c2 { -+ clock-frequency = <400000>; -+ -+ i2cswitch2: pca9548@74 { -+ compatible = "nxp,pca9548"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x74>; -+ reset-gpios = <&gpio6 5 GPIO_ACTIVE_LOW>; -+ -+ i2c@0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0>; -+ /* USB3.0 HUB node(s) */ -+ }; -+ -+ i2c@6 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <6>; -+ /* PCIe node(s) */ -+ }; -+ -+ i2c@7 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <7>; -+ /* Slot A (CN10) */ -+ -+ ov106xx@0 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x60>; -+ -+ port@0 { -+ ov106xx_in0: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin0ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep0>; -+ }; -+ ov106xx_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; -+ }; -+ ov106xx_ti954_des0ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep0>; -+ }; -+ }; -+ }; -+ -+ ov106xx@1 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x61>; -+ -+ port@0 { -+ ov106xx_in1: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin1ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep1>; -+ }; -+ ov106xx_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; -+ }; -+ ov106xx_ti954_des0ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep1>; -+ }; -+ }; -+ }; -+ -+ ov106xx@2 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x62>; -+ -+ port@0 { -+ ov106xx_in2: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin2ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep2>; -+ }; -+ ov106xx_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; -+ }; -+ }; -+ }; -+ -+ ov106xx@3 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x63>; -+ -+ port@0 { -+ ov106xx_in3: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin3ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep3>; -+ }; -+ ov106xx_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB964 @ 0x3a */ -+ ti964-ti9x3@0 { -+ compatible = "ti,ti964-ti9x3"; -+ reg = <0x3a>; -+ ti,sensor_delay = <350>; -+ ti,links = <4>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "stp"; -+ -+ port@0 { -+ ti964_des0ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ ti964_des0ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ ti964_des0ep2: endpoint@2 { -+ ti9x3-addr = <0x0e>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ ti964_des0ep3: endpoint@3 { -+ ti9x3-addr = <0x0f>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ ti964_csi0ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB954 @ 0x38 */ -+ ti954-ti9x3@0 { -+ compatible = "ti,ti954-ti9x3"; -+ reg = <0x38>; -+ /* gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; */ -+ ti,sensor_delay = <350>; -+ ti,links = <2>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "stp"; -+ -+ port@0 { -+ ti954_des0ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ ti954_des0ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ }; -+ port@1 { -+ ti954_csi0ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ -+ /* MAX9286 @ 0x2c */ -+ max9286-max9271@0 { -+ compatible = "maxim,max9286-max9271"; -+ reg = <0x2c>; -+ maxim,sensor_delay = <350>; -+ maxim,links = <4>; -+ maxim,lanes = <4>; -+ maxim,resetb-gpio = <1>; -+ maxim,fsync-mode = "automatic"; -+ maxim,timeout = <100>; -+ -+ port@0 { -+ max9286_des0ep0: endpoint@0 { -+ max9271-addr = <0x50>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ max9286_des0ep1: endpoint@1 { -+ max9271-addr = <0x51>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ max9286_des0ep2: endpoint@2 { -+ max9271-addr = <0x52>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ max9286_des0ep3: endpoint@3 { -+ max9271-addr = <0x53>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ max9286_csi0ep0: endpoint { -+ csi-rate = <700>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ }; -+ -+ i2c@2 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <2>; -+ /* Slot B (CN11) */ -+ -+ ov106xx@4 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x64>; -+ -+ port@0 { -+ ov106xx_in4: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin4ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep0>; -+ }; -+ ov106xx_ti964_des1ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep0>; -+ }; -+ ov106xx_ti954_des1ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep0>; -+ }; -+ }; -+ }; -+ -+ ov106xx@5 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x65>; -+ -+ port@0 { -+ ov106xx_in5: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin5ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep1>; -+ }; -+ ov106xx_ti964_des1ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep1>; -+ }; -+ ov106xx_ti954_des1ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep1>; -+ }; -+ }; -+ }; -+ -+ ov106xx@6 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x66>; -+ -+ port@0 { -+ ov106xx_in6: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin6ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep2>; -+ }; -+ ov106xx_ti964_des1ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep2>; -+ }; -+ }; -+ }; -+ -+ ov106xx@7 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x67>; -+ -+ port@0 { -+ ov106xx_in7: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin7ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep3>; -+ }; -+ ov106xx_ti964_des1ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep3>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB964 @ 0x3a */ -+ ti964-ti9x3@1 { -+ compatible = "ti,ti964-ti9x3"; -+ reg = <0x3a>; -+ ti,sensor_delay = <350>; -+ ti,links = <4>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "stp"; -+ -+ port@0 { -+ ti964_des1ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ ti964_des1ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ ti964_des1ep2: endpoint@2 { -+ ti9x3-addr = <0x0e>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in6>; -+ }; -+ ti964_des1ep3: endpoint@3 { -+ ti9x3-addr = <0x0f>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in7>; -+ }; -+ }; -+ port@1 { -+ ti964_csi2ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB954 @ 0x38 */ -+ ti954-ti9x3@1 { -+ compatible = "ti,ti954-ti9x3"; -+ reg = <0x38>; -+ /* gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>; */ -+ ti,sensor_delay = <350>; -+ ti,links = <2>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "stp"; -+ -+ port@0 { -+ ti954_des1ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ ti954_des1ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ }; -+ port@1 { -+ ti954_csi2ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+ -+ /* MAX9286 @ 0x2c */ -+ max9286-max9271@1 { -+ compatible = "maxim,max9286-max9271"; -+ reg = <0x2c>; -+ maxim,sensor_delay = <350>; -+ maxim,links = <4>; -+ maxim,lanes = <4>; -+ maxim,resetb-gpio = <1>; -+ maxim,fsync-mode = "automatic"; -+ maxim,timeout = <100>; -+ -+ port@0 { -+ max9286_des1ep0: endpoint@0 { -+ max9271-addr = <0x50>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ max9286_des1ep1: endpoint@1 { -+ max9271-addr = <0x51>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ max9286_des1ep2: endpoint@2 { -+ max9271-addr = <0x52>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in6>; -+ }; -+ max9286_des1ep3: endpoint@3 { -+ max9271-addr = <0x53>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in7>; -+ }; -+ }; -+ port@1 { -+ max9286_csi2ep0: endpoint { -+ csi-rate = <700>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+ }; -+ -+ i2c@3 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <3>; -+ /* Slot C (CN12) */ -+ }; -+ -+ i2c@1 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <1>; -+ /* Slot A (CN10) */ -+ -+ video_a_ext0: pca9535@26 { -+ compatible = "nxp,pca9535"; -+ reg = <0x26>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_a_des_cfg1 { -+ gpio-hog; -+ gpios = <5 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-A cfg1"; -+ }; -+ video_a_des_cfg0 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-A cfg0"; -+ }; -+ video_a_pwr_shdn { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR_SHDN"; -+ }; -+ video_a_cam_pwr0 { -+ gpio-hog; -+ gpios = <12 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR0"; -+ }; -+ video_a_cam_pwr1 { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR1"; -+ }; -+ video_a_cam_pwr2 { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR2"; -+ }; -+ video_a_cam_pwr3 { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR3"; -+ }; -+ video_a_des_shdn { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A DES_SHDN"; -+ }; -+ video_a_des_led { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-A led"; -+ }; -+ }; -+ -+ video_a_ext1: max7325@5c { -+ compatible = "maxim,max7325"; -+ reg = <0x5c>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_a_des_cfg2 { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-A cfg2"; -+ }; -+ video_a_des_cfg1 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-A cfg1"; -+ }; -+ video_a_des_cfg0 { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-A cfg0"; -+ }; -+ video_a_pwr_shdn { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR_SHDN"; -+ }; -+ video_a_cam_pwr0 { -+ gpio-hog; -+ gpios = <8 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR0"; -+ }; -+ video_a_cam_pwr1 { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR1"; -+ }; -+ video_a_cam_pwr2 { -+ gpio-hog; -+ gpios = <10 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR2"; -+ }; -+ video_a_cam_pwr3 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR3"; -+ }; -+ video_a_des_shdn { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A DES_SHDN"; -+ }; -+ video_a_led { -+ gpio-hog; -+ gpios = <12 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-A LED"; -+ }; -+ }; -+ }; -+ -+ i2c@5 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <5>; -+ /* Slot B (CN11) */ -+ -+ video_b_ext0: pca9535@26 { -+ compatible = "nxp,pca9535"; -+ reg = <0x26>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_b_des_cfg1 { -+ gpio-hog; -+ gpios = <5 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-B cfg1"; -+ }; -+ video_b_des_cfg0 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-B cfg0"; -+ }; -+ video_b_pwr_shdn { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR_SHDN"; -+ }; -+ video_b_cam_pwr0 { -+ gpio-hog; -+ gpios = <12 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR0"; -+ }; -+ video_b_cam_pwr1 { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR1"; -+ }; -+ video_b_cam_pwr2 { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR2"; -+ }; -+ video_b_cam_pwr3 { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR3"; -+ }; -+ video_b_des_shdn { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B DES_SHDN"; -+ }; -+ video_b_des_led { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-B led"; -+ }; -+ }; -+ -+ video_b_ext1: max7325@5c { -+ compatible = "maxim,max7325"; -+ reg = <0x5c>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_b_des_cfg2 { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-B cfg2"; -+ }; -+ video_b_des_cfg1 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-B cfg1"; -+ }; -+ video_b_des_cfg0 { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-B cfg0"; -+ }; -+ video_b_pwr_shdn { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR_SHDN"; -+ }; -+ video_b_cam_pwr0 { -+ gpio-hog; -+ gpios = <8 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR0"; -+ }; -+ video_b_cam_pwr1 { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR1"; -+ }; -+ video_b_cam_pwr2 { -+ gpio-hog; -+ gpios = <10 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR2"; -+ }; -+ video_b_cam_pwr3 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR3"; -+ }; -+ video_b_des_shdn { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B DES_SHDN"; -+ }; -+ video_b_led { -+ gpio-hog; -+ gpios = <12 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-B LED"; -+ }; -+ }; -+ }; -+ -+ i2c@4 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <4>; -+ /* Slot C (CN12) */ -+ }; -+ }; -+}; -+ -+&i2c4 { -+ i2cswitch4: pca9548@74 { -+ compatible = "nxp,pca9548"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x74>; -+ reset-gpios= <&gpio5 15 GPIO_ACTIVE_LOW>; -+ -+ i2c@0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0>; -+ /* FAN node - EMC2103 */ -+ fan_ctrl:ecm2103@2e { -+ compatible = "emc2103"; -+ reg = <0x2e>; -+ }; -+ }; -+ -+ i2c@1 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <1>; -+ /* Power nodes - 2 x TPS544x20 */ -+ }; -+ -+ i2c@2 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <2>; -+ /* CAN and power board nodes */ -+ -+ gpio_ext_pwr: pca9535@22 { -+ compatible = "nxp,pca9535"; -+ reg = <0x22>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio1>; -+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>; -+ -+ /* enable input DCDC after wake-up signal released */ -+ pwr_hold { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "pwr_hold"; -+ }; -+ -+ /* CAN0 */ -+ can0_stby { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can0_stby"; -+ }; -+ can0_load { -+ gpio-hog; -+ gpios = <0 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can0_120R_load"; -+ }; -+ /* CAN1 */ -+ can1_stby { -+ gpio-hog; -+ gpios = <5 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can1_stby"; -+ }; -+ can1_load { -+ gpio-hog; -+ gpios = <1 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can1_120R_load"; -+ }; -+ /* CAN2 */ -+ can2_stby { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can2_stby"; -+ }; -+ can2_load { -+ gpio-hog; -+ gpios = <2 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can2_120R_load"; -+ }; -+ can2_rst { -+ gpio-hog; -+ gpios = <8 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "can2_rst"; -+ }; -+ /* CAN3 */ -+ can3_stby { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can3_stby"; -+ }; -+ can3_load { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can3_120R_load"; -+ }; -+ can3_rst { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "can3_rst"; -+ }; -+ }; -+ }; -+ -+ i2c@3 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <3>; -+ /* FPDLink output node - DS90UH947 */ -+ }; -+ -+ i2c@4 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <4>; -+ /* BCM switch node */ -+ }; -+ -+ i2c@5 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <5>; -+ /* LED board node(s) */ -+ -+ gpio_ext_led: pca9535@22 { -+ compatible = "nxp,pca9535"; -+ reg = <0x22>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ /* gpios 0..7 are used for indication LEDs, low-active */ -+ }; -+ }; -+ -+ i2c@6 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <6>; -+ /* M2 connector i2c node(s) */ -+ }; -+ -+ /* port 7 is not used */ -+ }; -+}; -+ -+&pcie_bus_clk { -+ clock-frequency = <100000000>; -+ status = "okay"; -+}; -+ -+&pciec0 { -+ status = "okay"; -+}; -+ -+&pciec1 { -+ status = "okay"; -+}; -+ -+&vin0 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin0ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ }; -+ port@1 { -+ csi0ep0: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin0_max9286_des0ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep0>; -+ }; -+ vin0_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; -+ }; -+ vin0_ti954_des0ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep0>; -+ }; -+ }; -+ }; -+}; -+ -+&vin1 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin1ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <1>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ }; -+ port@1 { -+ csi0ep1: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin1_max9286_des0ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep1>; -+ }; -+ vin1_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; -+ }; -+ vin1_ti954_des0ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep1>; -+ }; -+ }; -+ }; -+}; -+ -+&vin2 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin2ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <2>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ }; -+ port@1 { -+ csi0ep2: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin2_max9286_des0ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep2>; -+ }; -+ vin2_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; -+ }; -+ }; -+ }; -+}; -+ -+&vin3 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin3ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <3>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ csi0ep3: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin3_max9286_des0ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep3>; -+ }; -+ vin3_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; -+ }; -+ }; -+ }; -+}; -+ -+&vin4 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin4ep0: endpoint { -+ csi,select = "csi41"; -+ virtual,channel = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep0: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin4_max9286_des1ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep0>; -+ }; -+ vin4_ti964_des1ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep0>; -+ }; -+ vin4_ti954_des1ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep0>; -+ }; -+ }; -+ }; -+}; -+ -+&vin5 { ++&hsusb { + status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin5ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <1>; -+ remote-endpoint = <&ov106xx_in5>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep1: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin5_max9286_des1ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep1>; -+ }; -+ vin5_ti964_des1ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep1>; -+ }; -+ vin5_ti954_des1ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep1>; -+ }; -+ }; -+ }; +}; +diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vbm.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vbm.dts +new file mode 100644 +index 0000000..323722c +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vbm.dts +@@ -0,0 +1,26 @@ ++/* ++ * Device Tree Source for the H3ULCB Videobox Mini board on r8a7795 ES1.x ++ * ++ * Copyright (C) 2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ + -+&vin6 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; ++#include "r8a7795-es1-h3ulcb.dts" ++#include "ulcb-vbm.dtsi" + -+ port@0 { -+ vin6ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <2>; -+ remote-endpoint = <&ov106xx_in6>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep2: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin6_max9286_des1ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep2>; -+ }; -+ vin6_ti964_des1ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep2>; -+ }; -+ }; -+ }; ++/ { ++ model = "Renesas H3ULCB Videobox Mini board based on r8a7795"; +}; + -+&vin7 { -+ status = "okay"; -+ ++&du { + ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin7ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <3>; -+ remote-endpoint = <&ov106xx_in7>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep3: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin7_max9286_des1ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep3>; -+ }; -+ vin7_ti964_des1ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep3>; ++ port@3 { ++ endpoint { ++ remote-endpoint = <&lvds_enc_in>; + }; + }; + }; +}; -+ -+&csi2_40 { -+ status = "okay"; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "ycbcr422"; -+ receive,vc = <0>; -+ }; -+ csi2_vc1 { -+ data,type = "ycbcr422"; -+ receive,vc = <1>; -+ }; -+ csi2_vc2 { -+ data,type = "ycbcr422"; -+ receive,vc = <2>; -+ }; -+ csi2_vc3 { -+ data,type = "ycbcr422"; -+ receive,vc = <3>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_40_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ csi-rate = <300>; -+ }; -+ }; -+}; -+ -+&csi2_41 { -+ status = "okay"; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "ycbcr422"; -+ receive,vc = <0>; -+ }; -+ csi2_vc1 { -+ data,type = "ycbcr422"; -+ receive,vc = <1>; -+ }; -+ csi2_vc2 { -+ data,type = "ycbcr422"; -+ receive,vc = <2>; -+ }; -+ csi2_vc3 { -+ data,type = "ycbcr422"; -+ receive,vc = <3>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_41_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ csi-rate = <300>; -+ }; -+ }; -+}; -+ -+&rcar_sound { -+ pinctrl-0 = <&sound_clk_pins>; -+ -+ /* Multi DAI */ -+ #sound-dai-cells = <1>; -+}; -+ -+&sata { -+ status = "okay"; -+}; -+ -+&ssi1 { -+ /delete-property/shared-pin; -+}; -+ -+&avb { -+ /delete-property/phy-handle; -+ /delete-property/phy-gpios; -+ phy-mode = "rgmii"; -+ -+ /delete-node/ethernet-phy@0; -+ -+ fixed-link { -+ speed = <100>; -+ full-duplex; -+ }; -+}; -+ -+&msiof1 { -+ status = "disabled"; -+}; -+ -+&usb2_phy0 { -+ pinctrl-0 = <&usb0_pins>; -+ pinctrl-names = "default"; -+ -+ status = "okay"; -+}; -+ -+&xhci0 { -+ status = "okay"; -+}; -+ -+&hsusb { -+ status = "okay"; -+}; -+ -+&ehci0 { -+ status = "okay"; -+}; -+ -+&ohci0 { -+ status = "okay"; -+}; -+ -+&can0 { -+ pinctrl-0 = <&can0_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ -+ renesas,can-clock-select = <0x0>; -+}; -+ -+&can1 { -+ pinctrl-0 = <&can1_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ -+ renesas,can-clock-select = <0x0>; -+}; -+ -+&canfd { -+ pinctrl-0 = <&canfd0_pins &canfd1_pins>; -+ pinctrl-names = "default"; -+ status = "disabled"; -+ -+ renesas,can-clock-select = <0x0>; -+ -+ channel0 { -+ status = "okay"; -+ }; -+ -+ channel1 { -+ status = "okay"; -+ }; -+}; -+ -+/* uncomment to enable CN12 on VIN4-7 */ -+//#include "ulcb-vb-cn12.dtsi" diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts new file mode 100644 index 0000000..de56fa4 @@ -9949,14 +8274,13 @@ index 0000000..4fe67f8 +//#include "ulcb-kf-cn11.dtsi" diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts new file mode 100644 -index 0000000..98b6a08 +index 0000000..330bba2 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts -@@ -0,0 +1,1787 @@ +@@ -0,0 +1,68 @@ +/* -+ * Device Tree Source for the H3ULCB Videobox board ++ * Device Tree Source for the H3ULCB Videobox board on r8a7795 + * -+ * Copyright (C) 2017 Renesas Electronics Corp. + * Copyright (C) 2017 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License @@ -9965,170 +8289,11 @@ index 0000000..98b6a08 + */ + +#include "r8a7795-h3ulcb.dts" ++#include "ulcb-vb.dtsi" + +/ { + model = "Renesas H3ULCB Videobox board based on r8a7795"; + -+ leds { -+ compatible = "gpio-leds"; -+ -+ led5 { -+ gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; -+ }; -+ led6 { -+ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; -+ }; -+ /* D13 - status 0 */ -+ led_ext00 { -+ gpios = <&gpio_ext_led 0 GPIO_ACTIVE_LOW>; -+ /* linux,default-trigger = "heartbeat"; */ -+ }; -+ /* D14 - status 1 */ -+ led_ext01 { -+ gpios = <&gpio_ext_led 1 GPIO_ACTIVE_LOW>; -+ /* linux,default-trigger = "mmc1"; */ -+ }; -+ /* D16 - HDMI1 */ -+ led_ext02 { -+ gpios = <&gpio_ext_led 2 GPIO_ACTIVE_LOW>; -+ }; -+ /* D18 - HDMI0 */ -+ led_ext03 { -+ gpios = <&gpio_ext_led 3 GPIO_ACTIVE_LOW>; -+ }; -+ /* D20 - USB3.0 - 0.1 */ -+ led_ext04 { -+ gpios = <&gpio_ext_led 4 GPIO_ACTIVE_LOW>; -+ }; -+ /* D21 - USB3.0 - 0.2 */ -+ led_ext05 { -+ gpios = <&gpio_ext_led 5 GPIO_ACTIVE_LOW>; -+ }; -+ /* D24 - USB3.0 - 1.1 */ -+ led6_ext06 { -+ gpios = <&gpio_ext_led 6 GPIO_ACTIVE_LOW>; -+ }; -+ /* D25 - USB3.0 - 1.2 */ -+ led_ext07 { -+ gpios = <&gpio_ext_led 7 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ snd_clk: snd_clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <24576000>; -+ clock-output-names = "scki"; -+ }; -+ -+ vccq_sdhi3: regulator@5 { -+ compatible = "regulator-fixed"; -+ -+ regulator-name = "SDHI3 VccQ"; -+ /* external voltage translator to 1.8V */ -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ }; -+ -+ fpdlink_switch: regulator@8 { -+ compatible = "regulator-fixed"; -+ regulator-name = "fpdlink_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio1 20 0>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ -+ hub_reset: regulator@9 { -+ compatible = "regulator-fixed"; -+ regulator-name = "hub_reset"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio5 5 0>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ -+ hub_power: regulator@10 { -+ compatible = "regulator-fixed"; -+ regulator-name = "hub_power"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ gpio = <&gpio6 28 0>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ -+ /delete-node/sound; -+ -+ rsnd_ak4613: sound@0 { -+ pinctrl-0 = <&sound_0_pins>; -+ pinctrl-names = "default"; -+ compatible = "simple-audio-card"; -+ -+ simple-audio-card,format = "left_j"; -+ simple-audio-card,name = "ak4613"; -+ -+ simple-audio-card,bitclock-master = <&sndcpu>; -+ simple-audio-card,frame-master = <&sndcpu>; -+ -+ sndcpu: simple-audio-card,cpu@1 { -+ sound-dai = <&rcar_sound>; -+ }; -+ -+ sndcodec: simple-audio-card,codec@1 { -+ sound-dai = <&ak4613>; -+ }; -+ }; -+ -+ lvds-encoder { -+ compatible = "thine,thc63lvdm83d"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ port@0 { -+ reg = <0>; -+ lvds_enc_in: endpoint { -+ remote-endpoint = <&du_out_lvds0>; -+ }; -+ }; -+ port@1 { -+ reg = <1>; -+ lvds_enc_out: endpoint { -+ remote-endpoint = <&lvds_in>; -+ }; -+ }; -+ }; -+ }; -+ -+ lvds { -+ compatible = "lvds-connector"; -+ -+ width-mm = <210>; -+ height-mm = <158>; -+ -+ panel-timing { -+ /* 1280x800 @60Hz */ -+ clock-frequency = <65000000>; -+ hactive = <1280>; -+ vactive = <800>; -+ hsync-len = <40>; -+ hfront-porch = <80>; -+ hback-porch = <40>; -+ vfront-porch = <14>; -+ vback-porch = <14>; -+ vsync-len = <4>; -+ }; -+ -+ port { -+ lvds_in: endpoint { -+ remote-endpoint = <&lvds_enc_out>; -+ }; -+ }; -+ }; -+ + hdmi1-out { + compatible = "hdmi-connector"; + type = "a"; @@ -10139,76 +8304,10 @@ index 0000000..98b6a08 + }; + }; + }; -+ -+ excan_ref_clk: excan-ref-clock { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <16000000>; -+ }; -+ -+ radio: si468x@0 { -+ compatible = "si,si468x-pcm"; -+ status = "okay"; -+ -+ #sound-dai-cells = <0>; -+ }; -+ -+ spi_gpio_sw { -+ compatible = "spi-gpio"; -+ #address-cells = <0x1>; -+ #size-cells = <0x0>; -+ gpio-sck = <&gpio0 8 GPIO_ACTIVE_HIGH>; -+ gpio-miso = <&gpio0 10 GPIO_ACTIVE_HIGH>; -+ gpio-mosi = <&gpio0 11 GPIO_ACTIVE_HIGH>; -+ cs-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; -+ num-chipselects = <1>; -+ -+ spidev: spidev@0 { -+ compatible = "spidev", "spi-gpio"; -+ reg = <0>; -+ spi-max-frequency = <25000000>; -+ spi-cpha; -+ spi-cpol; -+ }; -+ }; -+ -+ spi_gpio_can { -+ compatible = "spi-gpio"; -+ #address-cells = <0x1>; -+ #size-cells = <0x0>; -+ gpio-sck = <&gpio1 2 GPIO_ACTIVE_HIGH>; -+ gpio-miso = <&gpio1 3 GPIO_ACTIVE_HIGH>; -+ gpio-mosi = <&gpio1 1 GPIO_ACTIVE_HIGH>; -+ cs-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH -+ &gpio1 4 GPIO_ACTIVE_HIGH>; -+ num-chipselects = <2>; -+ -+ spican0: spidev@0 { -+ compatible = "microchip,mcp2515"; -+ reg = <0>; -+ clocks = <&excan_ref_clk>; -+ interrupt-parent = <&gpio0>; -+ interrupts = <15 GPIO_ACTIVE_LOW>; -+ spi-max-frequency = <10000000>; -+ }; -+ spican1: spidev@1 { -+ compatible = "microchip,mcp2515"; -+ reg = <1>; -+ clocks = <&excan_ref_clk>; -+ interrupt-parent = <&gpio1>; -+ interrupts = <5 GPIO_ACTIVE_LOW>; -+ spi-max-frequency = <10000000>; -+ }; -+ }; +}; + +&du { + ports { -+ port@1 { -+ endpoint { -+ remote-endpoint = <&rcar_dw_hdmi0_in>; -+ }; -+ }; + port@2 { + endpoint { + remote-endpoint = <&rcar_dw_hdmi1_in>; @@ -10228,6 +8327,7 @@ index 0000000..98b6a08 + ports { + #address-cells = <1>; + #size-cells = <0>; ++ + port@0 { + reg = <0>; + rcar_dw_hdmi1_in: endpoint { @@ -10243,1503 +8343,41 @@ index 0000000..98b6a08 + }; +}; + -+&pfc { -+ hscif4_pins: hscif4 { -+ groups = "hscif4_data_a", "hscif4_ctrl"; -+ function = "hscif4"; -+ }; -+ -+ sdhi3_pins_3v3: sd3_3v3 { -+ groups = "sdhi3_data4", "sdhi3_ctrl"; -+ function = "sdhi3"; -+ power-source = <3300>; -+ }; -+ -+ /delete-node/sound; -+ -+ sound_0_pins: sound1 { -+ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; -+ function = "ssi"; -+ }; -+ -+ usb0_pins: usb0 { -+ groups = "usb0"; -+ function = "usb0"; -+ }; -+ -+ can0_pins: can0 { -+ groups = "can0_data_a"; -+ function = "can0"; -+ }; -+ -+ can1_pins: can1 { -+ groups = "can1_data"; -+ function = "can1"; -+ }; -+ -+ canfd0_pins: canfd0 { -+ groups = "canfd0_data_a"; -+ function = "canfd0"; -+ }; -+ -+ canfd1_pins: canfd1 { -+ groups = "canfd1_data"; -+ function = "canfd1"; -+ }; -+}; -+ -+&gpio0 { -+ video_a_irq { -+ gpio-hog; -+ gpios = <12 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-A irq"; -+ }; -+ -+ video_b_irq { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-B irq"; -+ }; -+ -+ video_c_irq { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-C irq"; -+ }; -+}; -+ -+&gpio1 { -+ gpioext_4_22_irq { -+ gpio-hog; -+ gpios = <25 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "0x22@i2c4 irq"; -+ }; -+ pcie_disable { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "mPCIe W_DISABLE"; -+ }; -+ m2_sleep { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "M.2 SLEEP#"; -+ }; -+ m2_pres { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "M.2 Present"; -+ }; -+ m2_pcie_det { -+ gpio-hog; -+ gpios = <18 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "M.2 PCIe detected"; -+ }; -+ m2_usb_det { -+ gpio-hog; -+ gpios = <19 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "M.2 USB30 detected"; -+ }; -+ m2_usb_det { -+ gpio-hog; -+ gpios = <27 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "M.2 SSD detected"; -+ }; -+ eth_phy_reset { -+ gpio-hog; -+ gpios = <16 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "BR phy reset"; -+ }; -+ eth_sw_reset { -+ gpio-hog; -+ gpios = <17 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "BR switch reset"; -+ }; -+}; -+ -+&gpio2 { -+ m2_wake { -+ gpio-hog; -+ gpios = <1 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "M.2 WAKE#"; -+ }; -+ m2_pcie_en { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "M.2 PCIe enable"; -+ }; -+}; -+ -+&gpio3 { -+ m2_power_off { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "M.2 FULL_CARD_POWER_OFF#"; -+ }; -+}; -+ -+&gpio6 { -+ pcie_wake { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "mPCIe WAKE#"; -+ }; -+ pcie_clkreq { -+ gpio-hog; -+ gpios = <10 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "mPCIe CLKREQ#"; -+ }; -+ m2_rst { -+ gpio-hog; -+ gpios = <21 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "M.2 RESET#"; -+ }; -+}; -+ -+&hscif4 { -+ pinctrl-0 = <&hscif4_pins>; -+ pinctrl-names = "default"; -+ uart-has-rtscts; -+ -+ status = "okay"; -+}; -+ -+&i2c2 { -+ clock-frequency = <400000>; -+ -+ i2cswitch2: pca9548@74 { -+ compatible = "nxp,pca9548"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x74>; -+ reset-gpios = <&gpio6 5 GPIO_ACTIVE_LOW>; -+ -+ i2c@0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0>; -+ /* USB3.0 HUB node(s) */ -+ }; -+ -+ i2c@6 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <6>; -+ /* PCIe node(s) */ -+ }; -+ -+ i2c@7 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <7>; -+ /* Slot A (CN10) */ -+ -+ ov106xx@0 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x60>; -+ -+ port@0 { -+ ov106xx_in0: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin0ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep0>; -+ }; -+ ov106xx_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; -+ }; -+ ov106xx_ti954_des0ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep0>; -+ }; -+ }; -+ }; -+ -+ ov106xx@1 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x61>; -+ -+ port@0 { -+ ov106xx_in1: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin1ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep1>; -+ }; -+ ov106xx_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; -+ }; -+ ov106xx_ti954_des0ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep1>; -+ }; -+ }; -+ }; -+ -+ ov106xx@2 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x62>; -+ -+ port@0 { -+ ov106xx_in2: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin2ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep2>; -+ }; -+ ov106xx_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; -+ }; -+ }; -+ }; -+ -+ ov106xx@3 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x63>; -+ -+ port@0 { -+ ov106xx_in3: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin3ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep3>; -+ }; -+ ov106xx_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB964 @ 0x3a */ -+ ti964-ti9x3@0 { -+ compatible = "ti,ti964-ti9x3"; -+ reg = <0x3a>; -+ ti,sensor_delay = <350>; -+ ti,links = <4>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "stp"; -+ -+ port@0 { -+ ti964_des0ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ ti964_des0ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ ti964_des0ep2: endpoint@2 { -+ ti9x3-addr = <0x0e>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ ti964_des0ep3: endpoint@3 { -+ ti9x3-addr = <0x0f>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ ti964_csi0ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB954 @ 0x38 */ -+ ti954-ti9x3@0 { -+ compatible = "ti,ti954-ti9x3"; -+ reg = <0x38>; -+ /* gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; */ -+ ti,sensor_delay = <350>; -+ ti,links = <2>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "stp"; -+ -+ port@0 { -+ ti954_des0ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ ti954_des0ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ }; -+ port@1 { -+ ti954_csi0ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ -+ /* MAX9286 @ 0x2c */ -+ max9286-max9271@0 { -+ compatible = "maxim,max9286-max9271"; -+ reg = <0x2c>; -+ maxim,sensor_delay = <350>; -+ maxim,links = <4>; -+ maxim,lanes = <4>; -+ maxim,resetb-gpio = <1>; -+ maxim,fsync-mode = "automatic"; -+ maxim,timeout = <100>; -+ -+ port@0 { -+ max9286_des0ep0: endpoint@0 { -+ max9271-addr = <0x50>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ max9286_des0ep1: endpoint@1 { -+ max9271-addr = <0x51>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ max9286_des0ep2: endpoint@2 { -+ max9271-addr = <0x52>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ max9286_des0ep3: endpoint@3 { -+ max9271-addr = <0x53>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ max9286_csi0ep0: endpoint { -+ csi-rate = <700>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ }; -+ -+ i2c@2 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <2>; -+ /* Slot B (CN11) */ -+ -+ ov106xx@4 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x64>; -+ -+ port@0 { -+ ov106xx_in4: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin4ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep0>; -+ }; -+ ov106xx_ti964_des1ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep0>; -+ }; -+ ov106xx_ti954_des1ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep0>; -+ }; -+ }; -+ }; -+ -+ ov106xx@5 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x65>; -+ -+ port@0 { -+ ov106xx_in5: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin5ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep1>; -+ }; -+ ov106xx_ti964_des1ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep1>; -+ }; -+ ov106xx_ti954_des1ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep1>; -+ }; -+ }; -+ }; -+ -+ ov106xx@6 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x66>; -+ -+ port@0 { -+ ov106xx_in6: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin6ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep2>; -+ }; -+ ov106xx_ti964_des1ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep2>; -+ }; -+ }; -+ }; -+ -+ ov106xx@7 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x67>; -+ -+ port@0 { -+ ov106xx_in7: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin7ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep3>; -+ }; -+ ov106xx_ti964_des1ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep3>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB964 @ 0x3a */ -+ ti964-ti9x3@1 { -+ compatible = "ti,ti964-ti9x3"; -+ reg = <0x3a>; -+ ti,sensor_delay = <350>; -+ ti,links = <4>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "stp"; -+ -+ port@0 { -+ ti964_des1ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ ti964_des1ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ ti964_des1ep2: endpoint@2 { -+ ti9x3-addr = <0x0e>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in6>; -+ }; -+ ti964_des1ep3: endpoint@3 { -+ ti9x3-addr = <0x0f>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in7>; -+ }; -+ }; -+ port@1 { -+ ti964_csi2ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB954 @ 0x38 */ -+ ti954-ti9x3@1 { -+ compatible = "ti,ti954-ti9x3"; -+ reg = <0x38>; -+ /* gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>; */ -+ ti,sensor_delay = <350>; -+ ti,links = <2>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "stp"; -+ -+ port@0 { -+ ti954_des1ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ ti954_des1ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ }; -+ port@1 { -+ ti954_csi2ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+ -+ /* MAX9286 @ 0x2c */ -+ max9286-max9271@1 { -+ compatible = "maxim,max9286-max9271"; -+ reg = <0x2c>; -+ maxim,sensor_delay = <350>; -+ maxim,links = <4>; -+ maxim,lanes = <4>; -+ maxim,resetb-gpio = <1>; -+ maxim,fsync-mode = "automatic"; -+ maxim,timeout = <100>; -+ -+ port@0 { -+ max9286_des1ep0: endpoint@0 { -+ max9271-addr = <0x50>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ max9286_des1ep1: endpoint@1 { -+ max9271-addr = <0x51>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ max9286_des1ep2: endpoint@2 { -+ max9271-addr = <0x52>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in6>; -+ }; -+ max9286_des1ep3: endpoint@3 { -+ max9271-addr = <0x53>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in7>; -+ }; -+ }; -+ port@1 { -+ max9286_csi2ep0: endpoint { -+ csi-rate = <700>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+ }; -+ -+ i2c@3 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <3>; -+ /* Slot C (CN12) */ -+ }; -+ -+ i2c@1 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <1>; -+ /* Slot A (CN10) */ -+ -+ video_a_ext0: pca9535@26 { -+ compatible = "nxp,pca9535"; -+ reg = <0x26>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_a_des_cfg1 { -+ gpio-hog; -+ gpios = <5 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-A cfg1"; -+ }; -+ video_a_des_cfg0 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-A cfg0"; -+ }; -+ video_a_pwr_shdn { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR_SHDN"; -+ }; -+ video_a_cam_pwr0 { -+ gpio-hog; -+ gpios = <12 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR0"; -+ }; -+ video_a_cam_pwr1 { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR1"; -+ }; -+ video_a_cam_pwr2 { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR2"; -+ }; -+ video_a_cam_pwr3 { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR3"; -+ }; -+ video_a_des_shdn { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A DES_SHDN"; -+ }; -+ video_a_des_led { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-A led"; -+ }; -+ }; -+ -+ video_a_ext1: max7325@5c { -+ compatible = "maxim,max7325"; -+ reg = <0x5c>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_a_des_cfg2 { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-A cfg2"; -+ }; -+ video_a_des_cfg1 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-A cfg1"; -+ }; -+ video_a_des_cfg0 { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-A cfg0"; -+ }; -+ video_a_pwr_shdn { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR_SHDN"; -+ }; -+ video_a_cam_pwr0 { -+ gpio-hog; -+ gpios = <8 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR0"; -+ }; -+ video_a_cam_pwr1 { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR1"; -+ }; -+ video_a_cam_pwr2 { -+ gpio-hog; -+ gpios = <10 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR2"; -+ }; -+ video_a_cam_pwr3 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR3"; -+ }; -+ video_a_des_shdn { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A DES_SHDN"; -+ }; -+ video_a_led { -+ gpio-hog; -+ gpios = <12 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-A LED"; -+ }; -+ }; -+ }; -+ -+ i2c@5 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <5>; -+ /* Slot B (CN11) */ -+ -+ video_b_ext0: pca9535@26 { -+ compatible = "nxp,pca9535"; -+ reg = <0x26>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_b_des_cfg1 { -+ gpio-hog; -+ gpios = <5 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-B cfg1"; -+ }; -+ video_b_des_cfg0 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-B cfg0"; -+ }; -+ video_b_pwr_shdn { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR_SHDN"; -+ }; -+ video_b_cam_pwr0 { -+ gpio-hog; -+ gpios = <12 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR0"; -+ }; -+ video_b_cam_pwr1 { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR1"; -+ }; -+ video_b_cam_pwr2 { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR2"; -+ }; -+ video_b_cam_pwr3 { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR3"; -+ }; -+ video_b_des_shdn { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B DES_SHDN"; -+ }; -+ video_b_des_led { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-B led"; -+ }; -+ }; -+ -+ video_b_ext1: max7325@5c { -+ compatible = "maxim,max7325"; -+ reg = <0x5c>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_b_des_cfg2 { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-B cfg2"; -+ }; -+ video_b_des_cfg1 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-B cfg1"; -+ }; -+ video_b_des_cfg0 { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-B cfg0"; -+ }; -+ video_b_pwr_shdn { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR_SHDN"; -+ }; -+ video_b_cam_pwr0 { -+ gpio-hog; -+ gpios = <8 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR0"; -+ }; -+ video_b_cam_pwr1 { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR1"; -+ }; -+ video_b_cam_pwr2 { -+ gpio-hog; -+ gpios = <10 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR2"; -+ }; -+ video_b_cam_pwr3 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR3"; -+ }; -+ video_b_des_shdn { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B DES_SHDN"; -+ }; -+ video_b_led { -+ gpio-hog; -+ gpios = <12 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-B LED"; -+ }; -+ }; -+ }; -+ -+ i2c@4 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <4>; -+ /* Slot C (CN12) */ -+ }; -+ }; -+}; -+ -+&i2c4 { -+ i2cswitch4: pca9548@74 { -+ compatible = "nxp,pca9548"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x74>; -+ reset-gpios= <&gpio5 15 GPIO_ACTIVE_LOW>; -+ -+ i2c@0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0>; -+ /* FAN node - EMC2103 */ -+ fan_ctrl:ecm2103@2e { -+ compatible = "emc2103"; -+ reg = <0x2e>; -+ }; -+ }; -+ -+ i2c@1 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <1>; -+ /* Power nodes - 2 x TPS544x20 */ -+ }; -+ -+ i2c@2 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <2>; -+ /* CAN and power board nodes */ -+ -+ gpio_ext_pwr: pca9535@22 { -+ compatible = "nxp,pca9535"; -+ reg = <0x22>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio1>; -+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>; -+ -+ /* enable input DCDC after wake-up signal released */ -+ pwr_hold { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "pwr_hold"; -+ }; -+ -+ /* CAN0 */ -+ can0_stby { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can0_stby"; -+ }; -+ can0_load { -+ gpio-hog; -+ gpios = <0 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can0_120R_load"; -+ }; -+ /* CAN1 */ -+ can1_stby { -+ gpio-hog; -+ gpios = <5 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can1_stby"; -+ }; -+ can1_load { -+ gpio-hog; -+ gpios = <1 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can1_120R_load"; -+ }; -+ /* CAN2 */ -+ can2_stby { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can2_stby"; -+ }; -+ can2_load { -+ gpio-hog; -+ gpios = <2 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can2_120R_load"; -+ }; -+ can2_rst { -+ gpio-hog; -+ gpios = <8 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "can2_rst"; -+ }; -+ /* CAN3 */ -+ can3_stby { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can3_stby"; -+ }; -+ can3_load { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can3_120R_load"; -+ }; -+ can3_rst { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "can3_rst"; -+ }; -+ }; -+ }; -+ -+ i2c@3 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <3>; -+ /* FPDLink output node - DS90UH947 */ -+ }; -+ -+ i2c@4 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <4>; -+ /* BCM switch node */ -+ }; -+ -+ i2c@5 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <5>; -+ /* LED board node(s) */ -+ -+ gpio_ext_led: pca9535@22 { -+ compatible = "nxp,pca9535"; -+ reg = <0x22>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ /* gpios 0..7 are used for indication LEDs, low-active */ -+ }; -+ }; -+ -+ i2c@6 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <6>; -+ /* M2 connector i2c node(s) */ -+ }; -+ -+ /* port 7 is not used */ -+ }; -+}; -+ -+&pcie_bus_clk { -+ clock-frequency = <100000000>; -+ status = "okay"; -+}; -+ -+&pciec0 { -+ status = "okay"; -+}; -+ -+&pciec1 { -+ status = "okay"; -+}; -+ -+&vin0 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin0ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ }; -+ port@1 { -+ csi0ep0: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin0_max9286_des0ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep0>; -+ }; -+ vin0_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; -+ }; -+ vin0_ti954_des0ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep0>; -+ }; -+ }; -+ }; -+}; -+ -+&vin1 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin1ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <1>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ }; -+ port@1 { -+ csi0ep1: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin1_max9286_des0ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep1>; -+ }; -+ vin1_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; -+ }; -+ vin1_ti954_des0ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep1>; -+ }; -+ }; -+ }; -+}; -+ -+&vin2 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin2ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <2>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ }; -+ port@1 { -+ csi0ep2: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin2_max9286_des0ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep2>; -+ }; -+ vin2_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; -+ }; -+ }; -+ }; -+}; -+ -+&vin3 { ++&hsusb0 { + status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin3ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <3>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ csi0ep3: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin3_max9286_des0ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep3>; -+ }; -+ vin3_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; -+ }; -+ }; -+ }; +}; +diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vbm.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vbm.dts +new file mode 100644 +index 0000000..87f1889 +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vbm.dts +@@ -0,0 +1,26 @@ ++/* ++ * Device Tree Source for the H3ULCB Videobox Mini board on r8a7795 ES1.x ++ * ++ * Copyright (C) 2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ + -+&vin4 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin4ep0: endpoint { -+ csi,select = "csi41"; -+ virtual,channel = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep0: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin4_max9286_des1ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep0>; -+ }; -+ vin4_ti964_des1ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep0>; -+ }; -+ vin4_ti954_des1ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep0>; -+ }; -+ }; -+ }; -+}; -+ -+&vin5 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin5ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <1>; -+ remote-endpoint = <&ov106xx_in5>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep1: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin5_max9286_des1ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep1>; -+ }; -+ vin5_ti964_des1ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep1>; -+ }; -+ vin5_ti954_des1ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep1>; -+ }; -+ }; -+ }; -+}; -+ -+&vin6 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; ++#include "r8a7795-h3ulcb.dts" ++#include "ulcb-vbm.dtsi" + -+ port@0 { -+ vin6ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <2>; -+ remote-endpoint = <&ov106xx_in6>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep2: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin6_max9286_des1ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep2>; -+ }; -+ vin6_ti964_des1ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep2>; -+ }; -+ }; -+ }; ++/ { ++ model = "Renesas H3ULCB Videobox Mini board based on r8a7795"; +}; + -+&vin7 { -+ status = "okay"; -+ ++&du { + ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin7ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <3>; -+ remote-endpoint = <&ov106xx_in7>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep3: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin7_max9286_des1ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep3>; -+ }; -+ vin7_ti964_des1ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep3>; ++ port@3 { ++ endpoint { ++ remote-endpoint = <&lvds_enc_in>; + }; + }; + }; +}; -+ -+&csi2_40 { -+ status = "okay"; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "ycbcr422"; -+ receive,vc = <0>; -+ }; -+ csi2_vc1 { -+ data,type = "ycbcr422"; -+ receive,vc = <1>; -+ }; -+ csi2_vc2 { -+ data,type = "ycbcr422"; -+ receive,vc = <2>; -+ }; -+ csi2_vc3 { -+ data,type = "ycbcr422"; -+ receive,vc = <3>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_40_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ csi-rate = <300>; -+ }; -+ }; -+}; -+ -+&csi2_41 { -+ status = "okay"; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "ycbcr422"; -+ receive,vc = <0>; -+ }; -+ csi2_vc1 { -+ data,type = "ycbcr422"; -+ receive,vc = <1>; -+ }; -+ csi2_vc2 { -+ data,type = "ycbcr422"; -+ receive,vc = <2>; -+ }; -+ csi2_vc3 { -+ data,type = "ycbcr422"; -+ receive,vc = <3>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_41_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ csi-rate = <300>; -+ }; -+ }; -+}; -+ -+&rcar_sound { -+ pinctrl-0 = <&sound_clk_pins>; -+ -+ /* Multi DAI */ -+ #sound-dai-cells = <1>; -+}; -+ -+&sata { -+ status = "okay"; -+}; -+ -+&ssi1 { -+ /delete-property/shared-pin; -+}; -+ -+&avb { -+ /delete-property/phy-handle; -+ /delete-property/phy-gpios; -+ phy-mode = "rgmii"; -+ -+ /delete-node/ethernet-phy@0; -+ -+ fixed-link { -+ speed = <100>; -+ full-duplex; -+ }; -+}; -+ -+&msiof1 { -+ status = "disabled"; -+}; -+ -+&usb2_phy0 { -+ pinctrl-0 = <&usb0_pins>; -+ pinctrl-names = "default"; -+ -+ status = "okay"; -+}; -+ -+&xhci0 { -+ status = "okay"; -+}; -+ -+&hsusb0 { -+ status = "okay"; -+}; -+ -+&ehci0 { -+ status = "okay"; -+}; -+ -+&ohci0 { -+ status = "okay"; -+}; -+ -+&can0 { -+ pinctrl-0 = <&can0_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ -+ renesas,can-clock-select = <0x0>; -+}; -+ -+&can1 { -+ pinctrl-0 = <&can1_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ -+ renesas,can-clock-select = <0x0>; -+}; -+ -+&canfd { -+ pinctrl-0 = <&canfd0_pins &canfd1_pins>; -+ pinctrl-names = "default"; -+ status = "disabled"; -+ -+ renesas,can-clock-select = <0x0>; -+ -+ channel0 { -+ status = "okay"; -+ }; -+ -+ channel1 { -+ status = "okay"; -+ }; -+}; -+ -+/* uncomment to enable CN12 on VIN4-7 */ -+//#include "ulcb-vb-cn12.dtsi" diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-view.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-view.dts new file mode 100644 index 0000000..2c24b85 @@ -14664,14 +11302,14 @@ index 0000000..979cebe + }; + }; +}; -diff --git a/arch/arm64/boot/dts/renesas/r8a7797-v3msk-vb.dts b/arch/arm64/boot/dts/renesas/r8a7797-v3msk-vb.dts +diff --git a/arch/arm64/boot/dts/renesas/r8a7797-v3msk-vbm.dts b/arch/arm64/boot/dts/renesas/r8a7797-v3msk-vbm.dts new file mode 100644 -index 0000000..1b531d8 +index 0000000..28a0b92 --- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7797-v3msk-vb.dts ++++ b/arch/arm64/boot/dts/renesas/r8a7797-v3msk-vbm.dts @@ -0,0 +1,498 @@ +/* -+ * Device Tree Source for the V3MSK Videobox board on r8a7797 ++ * Device Tree Source for the V3MSK Videobox Mini board on r8a7797 + * + * Copyright (C) 2017 Cogent Embedded, Inc. + * @@ -14683,7 +11321,7 @@ index 0000000..1b531d8 +#include "r8a7797-v3msk.dts" + +/ { -+ model = "Renesas V3MSK Videobox board based on r8a7797"; ++ model = "Renesas V3MSK Videobox Mini board based on r8a7797"; + + aliases { + serial1 = &scif3; @@ -18162,6 +14800,2301 @@ index 0000000..92ed4a4 + }; + }; +}; +diff --git a/arch/arm64/boot/dts/renesas/ulcb-vb.dtsi b/arch/arm64/boot/dts/renesas/ulcb-vb.dtsi +new file mode 100644 +index 0000000..193153e +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/ulcb-vb.dtsi +@@ -0,0 +1,1726 @@ ++/* ++ * Device Tree Source for the ULCB Videobox board ++ * ++ * Copyright (C) 2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++/ { ++ leds { ++ compatible = "gpio-leds"; ++ ++ led5 { ++ gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; ++ }; ++ led6 { ++ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; ++ }; ++ /* D13 - status 0 */ ++ led_ext00 { ++ gpios = <&gpio_ext_led 0 GPIO_ACTIVE_LOW>; ++ /* linux,default-trigger = "heartbeat"; */ ++ }; ++ /* D14 - status 1 */ ++ led_ext01 { ++ gpios = <&gpio_ext_led 1 GPIO_ACTIVE_LOW>; ++ /* linux,default-trigger = "mmc1"; */ ++ }; ++ /* D16 - HDMI1 */ ++ led_ext02 { ++ gpios = <&gpio_ext_led 2 GPIO_ACTIVE_LOW>; ++ }; ++ /* D18 - HDMI0 */ ++ led_ext03 { ++ gpios = <&gpio_ext_led 3 GPIO_ACTIVE_LOW>; ++ }; ++ /* D20 - USB3.0 - 0.1 */ ++ led_ext04 { ++ gpios = <&gpio_ext_led 4 GPIO_ACTIVE_LOW>; ++ }; ++ /* D21 - USB3.0 - 0.2 */ ++ led_ext05 { ++ gpios = <&gpio_ext_led 5 GPIO_ACTIVE_LOW>; ++ }; ++ /* D24 - USB3.0 - 1.1 */ ++ led6_ext06 { ++ gpios = <&gpio_ext_led 6 GPIO_ACTIVE_LOW>; ++ }; ++ /* D25 - USB3.0 - 1.2 */ ++ led_ext07 { ++ gpios = <&gpio_ext_led 7 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ snd_clk: snd_clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <24576000>; ++ clock-output-names = "scki"; ++ }; ++ ++ vccq_sdhi3: regulator@5 { ++ compatible = "regulator-fixed"; ++ ++ regulator-name = "SDHI3 VccQ"; ++ /* external voltage translator to 1.8V */ ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ }; ++ ++ fpdlink_switch: regulator@8 { ++ compatible = "regulator-fixed"; ++ regulator-name = "fpdlink_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio1 20 0>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ hub_reset: regulator@9 { ++ compatible = "regulator-fixed"; ++ regulator-name = "hub_reset"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio5 5 0>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ hub_power: regulator@10 { ++ compatible = "regulator-fixed"; ++ regulator-name = "hub_power"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ gpio = <&gpio6 28 0>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ /delete-node/sound; ++ ++ rsnd_ak4613: sound@0 { ++ pinctrl-0 = <&sound_0_pins>; ++ pinctrl-names = "default"; ++ compatible = "simple-audio-card"; ++ ++ simple-audio-card,format = "left_j"; ++ simple-audio-card,name = "ak4613"; ++ ++ simple-audio-card,bitclock-master = <&sndcpu>; ++ simple-audio-card,frame-master = <&sndcpu>; ++ ++ sndcpu: simple-audio-card,cpu@1 { ++ sound-dai = <&rcar_sound>; ++ }; ++ ++ sndcodec: simple-audio-card,codec@1 { ++ sound-dai = <&ak4613>; ++ }; ++ }; ++ ++ lvds-encoder { ++ compatible = "thine,thc63lvdm83d"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ port@0 { ++ reg = <0>; ++ lvds_enc_in: endpoint { ++ remote-endpoint = <&du_out_lvds0>; ++ }; ++ }; ++ port@1 { ++ reg = <1>; ++ lvds_enc_out: endpoint { ++ remote-endpoint = <&lvds_in>; ++ }; ++ }; ++ }; ++ }; ++ ++ lvds { ++ compatible = "lvds-connector"; ++ ++ width-mm = <210>; ++ height-mm = <158>; ++ ++ panel-timing { ++ /* 1280x800 @60Hz */ ++ clock-frequency = <65000000>; ++ hactive = <1280>; ++ vactive = <800>; ++ hsync-len = <40>; ++ hfront-porch = <80>; ++ hback-porch = <40>; ++ vfront-porch = <14>; ++ vback-porch = <14>; ++ vsync-len = <4>; ++ }; ++ ++ port { ++ lvds_in: endpoint { ++ remote-endpoint = <&lvds_enc_out>; ++ }; ++ }; ++ }; ++ ++ excan_ref_clk: excan-ref-clock { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <16000000>; ++ }; ++ ++ radio: si468x@0 { ++ compatible = "si,si468x-pcm"; ++ status = "okay"; ++ ++ #sound-dai-cells = <0>; ++ }; ++ ++ spi_gpio_sw { ++ compatible = "spi-gpio"; ++ #address-cells = <0x1>; ++ #size-cells = <0x0>; ++ gpio-sck = <&gpio0 8 GPIO_ACTIVE_HIGH>; ++ gpio-miso = <&gpio0 10 GPIO_ACTIVE_HIGH>; ++ gpio-mosi = <&gpio0 11 GPIO_ACTIVE_HIGH>; ++ cs-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; ++ num-chipselects = <1>; ++ ++ spidev: spidev@0 { ++ compatible = "spidev", "spi-gpio"; ++ reg = <0>; ++ spi-max-frequency = <25000000>; ++ spi-cpha; ++ spi-cpol; ++ }; ++ }; ++ ++ spi_gpio_can { ++ compatible = "spi-gpio"; ++ #address-cells = <0x1>; ++ #size-cells = <0x0>; ++ gpio-sck = <&gpio1 2 GPIO_ACTIVE_HIGH>; ++ gpio-miso = <&gpio1 3 GPIO_ACTIVE_HIGH>; ++ gpio-mosi = <&gpio1 1 GPIO_ACTIVE_HIGH>; ++ cs-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH ++ &gpio1 4 GPIO_ACTIVE_HIGH>; ++ num-chipselects = <2>; ++ ++ spican0: spidev@0 { ++ compatible = "microchip,mcp2515"; ++ reg = <0>; ++ clocks = <&excan_ref_clk>; ++ interrupt-parent = <&gpio0>; ++ interrupts = <15 GPIO_ACTIVE_LOW>; ++ spi-max-frequency = <10000000>; ++ }; ++ spican1: spidev@1 { ++ compatible = "microchip,mcp2515"; ++ reg = <1>; ++ clocks = <&excan_ref_clk>; ++ interrupt-parent = <&gpio1>; ++ interrupts = <5 GPIO_ACTIVE_LOW>; ++ spi-max-frequency = <10000000>; ++ }; ++ }; ++}; ++ ++&pfc { ++ hscif4_pins: hscif4 { ++ groups = "hscif4_data_a", "hscif4_ctrl"; ++ function = "hscif4"; ++ }; ++ ++ sdhi3_pins_3v3: sd3_3v3 { ++ groups = "sdhi3_data4", "sdhi3_ctrl"; ++ function = "sdhi3"; ++ power-source = <3300>; ++ }; ++ ++ /delete-node/sound; ++ ++ sound_0_pins: sound1 { ++ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; ++ function = "ssi"; ++ }; ++ ++ usb0_pins: usb0 { ++ groups = "usb0"; ++ function = "usb0"; ++ }; ++ ++ can0_pins: can0 { ++ groups = "can0_data_a"; ++ function = "can0"; ++ }; ++ ++ can1_pins: can1 { ++ groups = "can1_data"; ++ function = "can1"; ++ }; ++ ++ canfd0_pins: canfd0 { ++ groups = "canfd0_data_a"; ++ function = "canfd0"; ++ }; ++ ++ canfd1_pins: canfd1 { ++ groups = "canfd1_data"; ++ function = "canfd1"; ++ }; ++}; ++ ++&gpio0 { ++ video_a_irq { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A irq"; ++ }; ++ ++ video_b_irq { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B irq"; ++ }; ++ ++ video_c_irq { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-C irq"; ++ }; ++}; ++ ++&gpio1 { ++ gpioext_4_22_irq { ++ gpio-hog; ++ gpios = <25 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "0x22@i2c4 irq"; ++ }; ++ pcie_disable { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "mPCIe W_DISABLE"; ++ }; ++ m2_sleep { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "M.2 SLEEP#"; ++ }; ++ m2_pres { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "M.2 Present"; ++ }; ++ m2_pcie_det { ++ gpio-hog; ++ gpios = <18 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "M.2 PCIe detected"; ++ }; ++ m2_usb_det { ++ gpio-hog; ++ gpios = <19 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "M.2 USB30 detected"; ++ }; ++ m2_usb_det { ++ gpio-hog; ++ gpios = <27 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "M.2 SSD detected"; ++ }; ++ eth_phy_reset { ++ gpio-hog; ++ gpios = <16 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "BR phy reset"; ++ }; ++ eth_sw_reset { ++ gpio-hog; ++ gpios = <17 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "BR switch reset"; ++ }; ++}; ++ ++&gpio2 { ++ m2_wake { ++ gpio-hog; ++ gpios = <1 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "M.2 WAKE#"; ++ }; ++ m2_pcie_en { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "M.2 PCIe enable"; ++ }; ++}; ++ ++&gpio3 { ++ m2_power_off { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "M.2 FULL_CARD_POWER_OFF#"; ++ }; ++}; ++ ++&gpio6 { ++ pcie_wake { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "mPCIe WAKE#"; ++ }; ++ pcie_clkreq { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "mPCIe CLKREQ#"; ++ }; ++ m2_rst { ++ gpio-hog; ++ gpios = <21 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "M.2 RESET#"; ++ }; ++}; ++ ++&hscif4 { ++ pinctrl-0 = <&hscif4_pins>; ++ pinctrl-names = "default"; ++ uart-has-rtscts; ++ ++ status = "okay"; ++}; ++ ++&i2c2 { ++ clock-frequency = <400000>; ++ ++ i2cswitch2: pca9548@74 { ++ compatible = "nxp,pca9548"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x74>; ++ reset-gpios = <&gpio6 5 GPIO_ACTIVE_LOW>; ++ ++ i2c@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ /* USB3.0 HUB node(s) */ ++ }; ++ ++ i2c@6 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <6>; ++ /* PCIe node(s) */ ++ }; ++ ++ i2c@7 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <7>; ++ /* Slot A (CN10) */ ++ ++ ov106xx@0 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x60>; ++ ++ port@0 { ++ ov106xx_in0: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin0ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ ov106xx_ti964_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep0>; ++ }; ++ ov106xx_ti954_des0ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep0>; ++ }; ++ }; ++ }; ++ ++ ov106xx@1 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x61>; ++ ++ port@0 { ++ ov106xx_in1: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin1ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ ov106xx_ti964_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep1>; ++ }; ++ ov106xx_ti954_des0ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep1>; ++ }; ++ }; ++ }; ++ ++ ov106xx@2 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x62>; ++ ++ port@0 { ++ ov106xx_in2: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin2ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ ov106xx_ti964_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep2>; ++ }; ++ }; ++ }; ++ ++ ov106xx@3 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x63>; ++ ++ port@0 { ++ ov106xx_in3: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin3ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ ov106xx_ti964_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep3>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB964 @ 0x3a */ ++ ti964-ti9x3@0 { ++ compatible = "ti,ti964-ti9x3"; ++ reg = <0x3a>; ++ ti,sensor_delay = <350>; ++ ti,links = <4>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "stp"; ++ ++ port@0 { ++ ti964_des0ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ ti964_des0ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ ti964_des0ep2: endpoint@2 { ++ ti9x3-addr = <0x0e>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ ti964_des0ep3: endpoint@3 { ++ ti9x3-addr = <0x0f>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ ti964_csi0ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB954 @ 0x38 */ ++ ti954-ti9x3@0 { ++ compatible = "ti,ti954-ti9x3"; ++ reg = <0x38>; ++ /* gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; */ ++ ti,sensor_delay = <350>; ++ ti,links = <2>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "stp"; ++ ++ port@0 { ++ ti954_des0ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ ti954_des0ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ }; ++ port@1 { ++ ti954_csi0ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ ++ /* MAX9286 @ 0x2c */ ++ max9286-max9271@0 { ++ compatible = "maxim,max9286-max9271"; ++ reg = <0x2c>; ++ maxim,sensor_delay = <350>; ++ maxim,links = <4>; ++ maxim,lanes = <4>; ++ maxim,resetb-gpio = <1>; ++ maxim,fsync-mode = "automatic"; ++ maxim,timeout = <100>; ++ ++ port@0 { ++ max9286_des0ep0: endpoint@0 { ++ max9271-addr = <0x50>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ max9286_des0ep1: endpoint@1 { ++ max9271-addr = <0x51>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ max9286_des0ep2: endpoint@2 { ++ max9271-addr = <0x52>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ max9286_des0ep3: endpoint@3 { ++ max9271-addr = <0x53>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ max9286_csi0ep0: endpoint { ++ csi-rate = <700>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ }; ++ ++ i2c@2 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <2>; ++ /* Slot B (CN11) */ ++ ++ ov106xx@4 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x64>; ++ ++ port@0 { ++ ov106xx_in4: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin4ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep0>; ++ }; ++ ov106xx_ti964_des1ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep0>; ++ }; ++ ov106xx_ti954_des1ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep0>; ++ }; ++ }; ++ }; ++ ++ ov106xx@5 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x65>; ++ ++ port@0 { ++ ov106xx_in5: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin5ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep1>; ++ }; ++ ov106xx_ti964_des1ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep1>; ++ }; ++ ov106xx_ti954_des1ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep1>; ++ }; ++ }; ++ }; ++ ++ ov106xx@6 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x66>; ++ ++ port@0 { ++ ov106xx_in6: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin6ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep2>; ++ }; ++ ov106xx_ti964_des1ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep2>; ++ }; ++ }; ++ }; ++ ++ ov106xx@7 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x67>; ++ ++ port@0 { ++ ov106xx_in7: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin7ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep3>; ++ }; ++ ov106xx_ti964_des1ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep3>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB964 @ 0x3a */ ++ ti964-ti9x3@1 { ++ compatible = "ti,ti964-ti9x3"; ++ reg = <0x3a>; ++ ti,sensor_delay = <350>; ++ ti,links = <4>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "stp"; ++ ++ port@0 { ++ ti964_des1ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in4>; ++ }; ++ ti964_des1ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in5>; ++ }; ++ ti964_des1ep2: endpoint@2 { ++ ti9x3-addr = <0x0e>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in6>; ++ }; ++ ti964_des1ep3: endpoint@3 { ++ ti9x3-addr = <0x0f>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in7>; ++ }; ++ }; ++ port@1 { ++ ti964_csi2ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB954 @ 0x38 */ ++ ti954-ti9x3@1 { ++ compatible = "ti,ti954-ti9x3"; ++ reg = <0x38>; ++ /* gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>; */ ++ ti,sensor_delay = <350>; ++ ti,links = <2>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "stp"; ++ ++ port@0 { ++ ti954_des1ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in4>; ++ }; ++ ti954_des1ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in5>; ++ }; ++ }; ++ port@1 { ++ ti954_csi2ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ }; ++ ++ /* MAX9286 @ 0x2c */ ++ max9286-max9271@1 { ++ compatible = "maxim,max9286-max9271"; ++ reg = <0x2c>; ++ maxim,sensor_delay = <350>; ++ maxim,links = <4>; ++ maxim,lanes = <4>; ++ maxim,resetb-gpio = <1>; ++ maxim,fsync-mode = "automatic"; ++ maxim,timeout = <100>; ++ ++ port@0 { ++ max9286_des1ep0: endpoint@0 { ++ max9271-addr = <0x50>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in4>; ++ }; ++ max9286_des1ep1: endpoint@1 { ++ max9271-addr = <0x51>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in5>; ++ }; ++ max9286_des1ep2: endpoint@2 { ++ max9271-addr = <0x52>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in6>; ++ }; ++ max9286_des1ep3: endpoint@3 { ++ max9271-addr = <0x53>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in7>; ++ }; ++ }; ++ port@1 { ++ max9286_csi2ep0: endpoint { ++ csi-rate = <700>; ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ }; ++ }; ++ ++ i2c@3 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <3>; ++ /* Slot C (CN12) */ ++ }; ++ ++ i2c@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <1>; ++ /* Slot A (CN10) */ ++ ++ video_a_ext0: pca9535@26 { ++ compatible = "nxp,pca9535"; ++ reg = <0x26>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_a_des_cfg1 { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg1"; ++ }; ++ video_a_des_cfg0 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg0"; ++ }; ++ video_a_pwr_shdn { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR_SHDN"; ++ }; ++ video_a_cam_pwr0 { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR0"; ++ }; ++ video_a_cam_pwr1 { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR1"; ++ }; ++ video_a_cam_pwr2 { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR2"; ++ }; ++ video_a_cam_pwr3 { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR3"; ++ }; ++ video_a_des_shdn { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A DES_SHDN"; ++ }; ++ video_a_des_led { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A led"; ++ }; ++ }; ++ ++ video_a_ext1: max7325@5c { ++ compatible = "maxim,max7325"; ++ reg = <0x5c>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_a_des_cfg2 { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg2"; ++ }; ++ video_a_des_cfg1 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg1"; ++ }; ++ video_a_des_cfg0 { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg0"; ++ }; ++ video_a_pwr_shdn { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR_SHDN"; ++ }; ++ video_a_cam_pwr0 { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR0"; ++ }; ++ video_a_cam_pwr1 { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR1"; ++ }; ++ video_a_cam_pwr2 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR2"; ++ }; ++ video_a_cam_pwr3 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR3"; ++ }; ++ video_a_des_shdn { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A DES_SHDN"; ++ }; ++ video_a_led { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A LED"; ++ }; ++ }; ++ }; ++ ++ i2c@5 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <5>; ++ /* Slot B (CN11) */ ++ ++ video_b_ext0: pca9535@26 { ++ compatible = "nxp,pca9535"; ++ reg = <0x26>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_b_des_cfg1 { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B cfg1"; ++ }; ++ video_b_des_cfg0 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B cfg0"; ++ }; ++ video_b_pwr_shdn { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR_SHDN"; ++ }; ++ video_b_cam_pwr0 { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR0"; ++ }; ++ video_b_cam_pwr1 { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR1"; ++ }; ++ video_b_cam_pwr2 { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR2"; ++ }; ++ video_b_cam_pwr3 { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR3"; ++ }; ++ video_b_des_shdn { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B DES_SHDN"; ++ }; ++ video_b_des_led { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B led"; ++ }; ++ }; ++ ++ video_b_ext1: max7325@5c { ++ compatible = "maxim,max7325"; ++ reg = <0x5c>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_b_des_cfg2 { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B cfg2"; ++ }; ++ video_b_des_cfg1 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B cfg1"; ++ }; ++ video_b_des_cfg0 { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B cfg0"; ++ }; ++ video_b_pwr_shdn { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR_SHDN"; ++ }; ++ video_b_cam_pwr0 { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR0"; ++ }; ++ video_b_cam_pwr1 { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR1"; ++ }; ++ video_b_cam_pwr2 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR2"; ++ }; ++ video_b_cam_pwr3 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR3"; ++ }; ++ video_b_des_shdn { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B DES_SHDN"; ++ }; ++ video_b_led { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B LED"; ++ }; ++ }; ++ }; ++ ++ i2c@4 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <4>; ++ /* Slot C (CN12) */ ++ }; ++ }; ++}; ++ ++&i2c4 { ++ i2cswitch4: pca9548@74 { ++ compatible = "nxp,pca9548"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x74>; ++ reset-gpios= <&gpio5 15 GPIO_ACTIVE_LOW>; ++ ++ i2c@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ /* FAN node - EMC2103 */ ++ fan_ctrl:ecm2103@2e { ++ compatible = "emc2103"; ++ reg = <0x2e>; ++ }; ++ }; ++ ++ i2c@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <1>; ++ /* Power nodes - 2 x TPS544x20 */ ++ }; ++ ++ i2c@2 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <2>; ++ /* CAN and power board nodes */ ++ ++ gpio_ext_pwr: pca9535@22 { ++ compatible = "nxp,pca9535"; ++ reg = <0x22>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio1>; ++ interrupts = <25 IRQ_TYPE_EDGE_FALLING>; ++ ++ /* enable input DCDC after wake-up signal released */ ++ pwr_hold { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "pwr_hold"; ++ }; ++ ++ /* CAN0 */ ++ can0_stby { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can0_stby"; ++ }; ++ can0_load { ++ gpio-hog; ++ gpios = <0 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can0_120R_load"; ++ }; ++ /* CAN1 */ ++ can1_stby { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can1_stby"; ++ }; ++ can1_load { ++ gpio-hog; ++ gpios = <1 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can1_120R_load"; ++ }; ++ /* CAN2 */ ++ can2_stby { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can2_stby"; ++ }; ++ can2_load { ++ gpio-hog; ++ gpios = <2 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can2_120R_load"; ++ }; ++ can2_rst { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "can2_rst"; ++ }; ++ /* CAN3 */ ++ can3_stby { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can3_stby"; ++ }; ++ can3_load { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can3_120R_load"; ++ }; ++ can3_rst { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "can3_rst"; ++ }; ++ }; ++ }; ++ ++ i2c@3 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <3>; ++ /* FPDLink output node - DS90UH947 */ ++ }; ++ ++ i2c@4 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <4>; ++ /* BCM switch node */ ++ }; ++ ++ i2c@5 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <5>; ++ /* LED board node(s) */ ++ ++ gpio_ext_led: pca9535@22 { ++ compatible = "nxp,pca9535"; ++ reg = <0x22>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ /* gpios 0..7 are used for indication LEDs, low-active */ ++ }; ++ }; ++ ++ i2c@6 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <6>; ++ /* M2 connector i2c node(s) */ ++ }; ++ ++ /* port 7 is not used */ ++ }; ++}; ++ ++&pcie_bus_clk { ++ clock-frequency = <100000000>; ++ status = "okay"; ++}; ++ ++&pciec0 { ++ status = "okay"; ++}; ++ ++&pciec1 { ++ status = "okay"; ++}; ++ ++&vin0 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin0ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ }; ++ port@1 { ++ csi0ep0: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin0_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ vin0_ti964_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep0>; ++ }; ++ vin0_ti954_des0ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep0>; ++ }; ++ }; ++ }; ++}; ++ ++&vin1 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin1ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <1>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ }; ++ port@1 { ++ csi0ep1: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin1_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ vin1_ti964_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep1>; ++ }; ++ vin1_ti954_des0ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep1>; ++ }; ++ }; ++ }; ++}; ++ ++&vin2 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin2ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <2>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ }; ++ port@1 { ++ csi0ep2: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin2_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ vin2_ti964_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep2>; ++ }; ++ }; ++ }; ++}; ++ ++&vin3 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin3ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <3>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ csi0ep3: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin3_max9286_des0ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ vin3_ti964_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep3>; ++ }; ++ }; ++ }; ++}; ++ ++&vin4 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin4ep0: endpoint { ++ csi,select = "csi41"; ++ virtual,channel = <0>; ++ remote-endpoint = <&ov106xx_in4>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep0: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin4_max9286_des1ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep0>; ++ }; ++ vin4_ti964_des1ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep0>; ++ }; ++ vin4_ti954_des1ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep0>; ++ }; ++ }; ++ }; ++}; ++ ++&vin5 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin5ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <1>; ++ remote-endpoint = <&ov106xx_in5>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep1: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin5_max9286_des1ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep1>; ++ }; ++ vin5_ti964_des1ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep1>; ++ }; ++ vin5_ti954_des1ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep1>; ++ }; ++ }; ++ }; ++}; ++ ++&vin6 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin6ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <2>; ++ remote-endpoint = <&ov106xx_in6>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep2: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin6_max9286_des1ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep2>; ++ }; ++ vin6_ti964_des1ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep2>; ++ }; ++ }; ++ }; ++}; ++ ++&vin7 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin7ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <3>; ++ remote-endpoint = <&ov106xx_in7>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep3: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin7_max9286_des1ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep3>; ++ }; ++ vin7_ti964_des1ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep3>; ++ }; ++ }; ++ }; ++}; ++ ++&csi2_40 { ++ status = "okay"; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "ycbcr422"; ++ receive,vc = <0>; ++ }; ++ csi2_vc1 { ++ data,type = "ycbcr422"; ++ receive,vc = <1>; ++ }; ++ csi2_vc2 { ++ data,type = "ycbcr422"; ++ receive,vc = <2>; ++ }; ++ csi2_vc3 { ++ data,type = "ycbcr422"; ++ receive,vc = <3>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_40_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ csi-rate = <300>; ++ }; ++ }; ++}; ++ ++&csi2_41 { ++ status = "okay"; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "ycbcr422"; ++ receive,vc = <0>; ++ }; ++ csi2_vc1 { ++ data,type = "ycbcr422"; ++ receive,vc = <1>; ++ }; ++ csi2_vc2 { ++ data,type = "ycbcr422"; ++ receive,vc = <2>; ++ }; ++ csi2_vc3 { ++ data,type = "ycbcr422"; ++ receive,vc = <3>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_41_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ csi-rate = <300>; ++ }; ++ }; ++}; ++ ++&rcar_sound { ++ pinctrl-0 = <&sound_clk_pins>; ++ ++ /* Multi DAI */ ++ #sound-dai-cells = <1>; ++}; ++ ++&sata { ++ status = "okay"; ++}; ++ ++&ssi1 { ++ /delete-property/shared-pin; ++}; ++ ++&avb { ++ /delete-property/phy-handle; ++ /delete-property/phy-gpios; ++ phy-mode = "rgmii"; ++ ++ /delete-node/ethernet-phy@0; ++ ++ fixed-link { ++ speed = <100>; ++ full-duplex; ++ }; ++}; ++ ++&msiof1 { ++ status = "disabled"; ++}; ++ ++&usb2_phy0 { ++ pinctrl-0 = <&usb0_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++}; ++ ++&xhci0 { ++ status = "okay"; ++}; ++ ++&ehci0 { ++ status = "okay"; ++}; ++ ++&ohci0 { ++ status = "okay"; ++}; ++ ++&can0 { ++ pinctrl-0 = <&can0_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ ++ renesas,can-clock-select = <0x0>; ++}; ++ ++&can1 { ++ pinctrl-0 = <&can1_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ ++ renesas,can-clock-select = <0x0>; ++}; ++ ++&canfd { ++ pinctrl-0 = <&canfd0_pins &canfd1_pins>; ++ pinctrl-names = "default"; ++ status = "disabled"; ++ ++ renesas,can-clock-select = <0x0>; ++ ++ channel0 { ++ status = "okay"; ++ }; ++ ++ channel1 { ++ status = "okay"; ++ }; ++}; ++ ++/* uncomment to enable CN12 on VIN4-7 */ ++//#include "ulcb-vb-cn12.dtsi" +diff --git a/arch/arm64/boot/dts/renesas/ulcb-vbm.dtsi b/arch/arm64/boot/dts/renesas/ulcb-vbm.dtsi +new file mode 100644 +index 0000000..3d4bcde +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/ulcb-vbm.dtsi +@@ -0,0 +1,557 @@ ++/* ++ * Device Tree Source for the ULCB Videobox Mini board ++ * ++ * Copyright (C) 2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++/ { ++ aliases { ++ serial1 = &scif1; ++ }; ++ ++ lvds-encoder { ++ compatible = "thine,thc63lvdm83d"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ lvds_enc_in: endpoint { ++ remote-endpoint = <&du_out_lvds0>; ++ }; ++ }; ++ port@1 { ++ reg = <1>; ++ lvds_enc_out: endpoint { ++ remote-endpoint = <&lvds_in>; ++ }; ++ }; ++ }; ++ }; ++ ++ lvds { ++ compatible = "lvds-connector"; ++ ++ width-mm = <210>; ++ height-mm = <158>; ++ ++ panel-timing { ++ /* 1280x800 @60Hz */ ++ clock-frequency = <65000000>; ++ hactive = <1280>; ++ vactive = <800>; ++ hsync-len = <40>; ++ hfront-porch = <80>; ++ hback-porch = <40>; ++ vfront-porch = <14>; ++ vback-porch = <14>; ++ vsync-len = <4>; ++ }; ++ ++ port { ++ lvds_in: endpoint { ++ remote-endpoint = <&lvds_enc_out>; ++ }; ++ }; ++ }; ++}; ++ ++&can0 { ++ pinctrl-0 = <&can0_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++}; ++ ++&can1 { ++ pinctrl-0 = <&can1_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++}; ++ ++&canfd { ++ pinctrl-0 = <&canfd0_pins &canfd1_pins>; ++ pinctrl-names = "default"; ++ status = "disabled"; ++ ++ channel0 { ++ status = "okay"; ++ }; ++ ++ channel1 { ++ status = "okay"; ++ }; ++}; ++ ++&csi2_41 { ++ status = "okay"; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "ycbcr422"; ++ receive,vc = <0>; ++ }; ++ csi2_vc1 { ++ data,type = "ycbcr422"; ++ receive,vc = <1>; ++ }; ++ csi2_vc2 { ++ data,type = "ycbcr422"; ++ receive,vc = <2>; ++ }; ++ csi2_vc3 { ++ data,type = "ycbcr422"; ++ receive,vc = <3>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_41_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ csi-rate = <300>; ++ }; ++ }; ++}; ++ ++&i2c1 { ++ pinctrl-0 = <&i2c1_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ ++ clock-frequency = <100000>; ++ ++ i2cswitch1: i2c-switch@74 { ++ compatible = "nxp,pca9548"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x74>; ++ reset-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; ++ ++ i2c@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ ++ ov106xx@0 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x60>; ++ ++ port@0 { ++ ov106xx_in0: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin4ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ ov106xx_ti964_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep0>; ++ }; ++ }; ++ }; ++ ++ ov106xx@1 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x61>; ++ ++ port@0 { ++ ov106xx_in1: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin5ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ ov106xx_ti964_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep1>; ++ }; ++ }; ++ }; ++ ++ ov106xx@2 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x62>; ++ ++ port@0 { ++ ov106xx_in2: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin6ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ ov106xx_ti964_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep2>; ++ }; ++ }; ++ }; ++ ++ ov106xx@3 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x63>; ++ ++ port@0 { ++ ov106xx_in3: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin7ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ ov106xx_ti964_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep3>; ++ }; ++ }; ++ }; ++ ++ max9286-max9271@0 { ++ compatible = "maxim,max9286-max9271"; ++ reg = <0x2c>; ++ maxim,sensor_delay = <350>; ++ maxim,links = <4>; ++ maxim,lanes = <4>; ++ maxim,resetb-gpio = <1>; ++ maxim,fsync-mode = "automatic"; ++ maxim,timeout = <100>; ++ ++ port@0 { ++ max9286_des0ep0: endpoint@0 { ++ max9271-addr = <0x50>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ max9286_des0ep1: endpoint@1 { ++ max9271-addr = <0x51>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ max9286_des0ep2: endpoint@2 { ++ max9271-addr = <0x52>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ max9286_des0ep3: endpoint@3 { ++ max9271-addr = <0x53>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ max9286_csi0ep0: endpoint { ++ csi-rate = <700>; ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ }; ++ ++ ti964-ti9x3@0 { ++ compatible = "ti,ti964-ti9x3"; ++ reg = <0x3a>; ++ ti,sensor_delay = <350>; ++ ti,links = <4>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "coax"; ++ ++ port@0 { ++ ti964_des0ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ ti964_des0ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ ti964_des0ep2: endpoint@2 { ++ ti9x3-addr = <0x0e>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ ti964_des0ep3: endpoint@3 { ++ ti9x3-addr = <0x0f>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ ti964_csi0ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ }; ++ }; ++ ++ i2c@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <1>; ++ ++ gpio_exp_6c: gpio@6c { ++ compatible = "maxim,max7325"; ++ reg = <0x6c>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ virq { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video VIRQ"; ++ }; ++ des_cfg { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video CNFG0"; ++ }; ++ pwr_shdn { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video PWR_SHDN"; ++ }; ++ cam_pwr0 { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video PWR0"; ++ }; ++ cam_pwr1 { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video PWR1"; ++ }; ++ cam_pwr2 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video PWR2"; ++ }; ++ cam_pwr3 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video PWR3"; ++ }; ++ des_shdn { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video DES_SHDN"; ++ }; ++ fpdl_shdn { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video FPDL_SHDN"; ++ }; ++ }; ++ }; ++ }; ++}; ++ ++&gpio1 { ++ can0stby { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "CAN0STBY"; ++ }; ++}; ++ ++&gpio2 { ++ can0_load { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "CAN0Loff"; ++ }; ++}; ++ ++&pfc { ++ can0_pins: can0 { ++ groups = "can0_data_a"; ++ function = "can0"; ++ }; ++ ++ can1_pins: can1 { ++ groups = "can1_data"; ++ function = "can1"; ++ }; ++ ++ canfd0_pins: canfd0 { ++ groups = "canfd0_data_a"; ++ function = "canfd0"; ++ }; ++ ++ canfd1_pins: canfd1 { ++ groups = "canfd1_data"; ++ function = "canfd1"; ++ }; ++ ++ i2c1_pins: i2c1 { ++ groups = "i2c1_b"; ++ function = "i2c1"; ++ }; ++ ++ scif1_pins: scif1 { ++ groups = "scif1_data_a"; ++ function = "scif1"; ++ }; ++}; ++ ++&scif1 { ++ pinctrl-0 = <&scif1_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++}; ++ ++&vin4 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin4ep0: endpoint { ++ csi,select = "csi41"; ++ virtual,channel = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ }; ++ port@1 { ++ csi0ep0: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin4_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ vin4_ti964_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep0>; ++ }; ++ }; ++ }; ++}; ++ ++&vin5 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin5ep0: endpoint { ++ csi,select = "csi41"; ++ virtual,channel = <1>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ }; ++ port@1 { ++ csi0ep1: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin5_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ vin5_ti964_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep1>; ++ }; ++ }; ++ }; ++}; ++ ++&vin6 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin6ep0: endpoint { ++ csi,select = "csi41"; ++ virtual,channel = <2>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ }; ++ port@1 { ++ csi0ep2: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin6_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ vin6_ti964_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep2>; ++ }; ++ }; ++ }; ++}; ++ ++&vin7 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin7ep0: endpoint { ++ csi,select = "csi41"; ++ virtual,channel = <3>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ csi0ep3: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin7_max9286_des0ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ vin7_ti964_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep3>; ++ }; ++ }; ++ }; ++}; -- 1.9.1 diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas_4.9.bbappend b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas_4.9.bbappend index 7421ef9..57a1ee6 100644 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas_4.9.bbappend +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas_4.9.bbappend @@ -81,11 +81,13 @@ KERNEL_DEVICETREE_append_h3ulcb = " \ renesas/r8a7795-es1-h3ulcb-had-beta.dtb \ renesas/r8a7795-es1-h3ulcb-kf.dtb \ renesas/r8a7795-es1-h3ulcb-vb.dtb \ + renesas/r8a7795-es1-h3ulcb-vbm.dtb \ renesas/r8a7795-h3ulcb-view.dtb \ renesas/r8a7795-h3ulcb-had-alfa.dtb \ renesas/r8a7795-h3ulcb-had-beta.dtb \ renesas/r8a7795-h3ulcb-kf.dtb \ renesas/r8a7795-h3ulcb-vb.dtb \ + renesas/r8a7795-h3ulcb-vbm.dtb \ " KERNEL_DEVICETREE_append_m3ulcb = " \ @@ -106,5 +108,5 @@ KERNEL_DEVICETREE_append_eagle = " \ KERNEL_DEVICETREE_append_v3msk = " \ renesas/r8a7797-v3msk.dtb \ renesas/r8a7797-v3msk-kf.dtb \ - renesas/r8a7797-v3msk-vb.dtb \ + renesas/r8a7797-v3msk-vbm.dtb \ " |