diff options
229 files changed, 19288 insertions, 3957 deletions
diff --git a/.gitignore b/.gitignore new file mode 100644 index 0000000..5cc4bc0 --- /dev/null +++ b/.gitignore @@ -0,0 +1,2 @@ +*.tar.bz2 +*.tar.gz diff --git a/.gitreview b/.gitreview new file mode 100644 index 0000000..b2558c6 --- /dev/null +++ b/.gitreview @@ -0,0 +1,5 @@ +[gerrit] +host=gerrit.automotivelinux.org +port=29418 +project=AGL/meta-renesas-rcar-gen3 +defaultbranch=eel diff --git a/COPYING.MIT b/COPYING.MIT new file mode 100644 index 0000000..fb950dc --- /dev/null +++ b/COPYING.MIT @@ -0,0 +1,17 @@ +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +THE SOFTWARE. diff --git a/MAINTAINERS b/MAINTAINERS new file mode 100644 index 0000000..4921617 --- /dev/null +++ b/MAINTAINERS @@ -0,0 +1,28 @@ +This file contains a list of BSP maintainers for the BSPs contained in +the meta-renesas repository. + +Descriptions of section entries: + + M: Mail patches to: FullName <address@domain> + F: Files and directories with wildcard patterns. + A trailing slash includes all files and subdirectory files. + F: meta-XXXXX/ all files in and below meta-XXXXX + F: meta-XXXXX/* all files in meta-XXXXX, but not below + One pattern per line. Multiple F: lines acceptable. + +Please keep this list in alphabetical order. + +Maintainers List (try to look for most precise areas first) + + ----------------------------------- +Renesas ARM SoCs R-Car Generation 3 +M: Takamitsu Honda <takamitsu.honda.pv@renesas.com> +F: meta-rcar-gen3 + +Renesas ARM SoCs R-Car Generation 2 +M: Takamitsu Honda <takamitsu.honda.pv@renesas.com> +F: meta-rcar-gen2 + +COMMON +M: Takamitsu Honda <takamitsu.honda.pv@renesas.com> +F: common @@ -1,18 +1,14 @@ -OpenEmbedded/Yocto BSP layer for Renesas Electronics's SoCs on ADAS platforms +OpenEmbedded/Yocto BSP layer for Renesas Electronics's SoCs ========== -This layer provides support for Renesas Electronics's ADAS platforms for use -with OpenEmbedded and/or Yocto. +This layer provides support for Renesas Electronics's platforms for use with +AGL (Automotive Grade Linux). -Layer maintainers: <source@cogentembedded.com> +Maintainers: + Stephane Desneux <stephane.desneux@iot.bzh> + Ronan Le Martret <ronan.lemartret@iot.bzh> + +This repository is a fork of the upstream repository maintained by Renesas: + Upstream layer maintainer: Takamitsu Honda <takamitsu.honda.pv@renesas.com> + Upstream repository: https://github.com/renesas-rcar/meta-renesas -Supported Boards/Machines -========================= - * meta-rcar-gen3-adas - - Renesas Electronics Corporation. Salvator-X View (R8A7795/R8A7796) - - Renesas Electronics Corporation. ULCB View (R8A7795/R8A7796) - - Renesas Electronics Corporation. ULCB HAD (R8A7795) - - Renesas Electronics Corporation. ULCB Kingfisher (R8A7795/R8A7796/R8A7797) - - Renesas Electronics Corporation. ULCB Videobox (R8A7795) - - Renesas Electronics Corporation. Eagle (R8A7797) - - Renesas Electronics Corporation. V3MSK (R8A7797) diff --git a/meta-rcar-gen3-adas/conf/layer.conf b/meta-rcar-gen3-adas/conf/layer.conf index c5da1c9..a091d3a 100644 --- a/meta-rcar-gen3-adas/conf/layer.conf +++ b/meta-rcar-gen3-adas/conf/layer.conf @@ -10,82 +10,3 @@ BBFILES += " \ BBFILE_COLLECTIONS += "rcar-gen3-adas" BBFILE_PATTERN_rcar-gen3-adas := "^${LAYERDIR}/" BBFILE_PRIORITY_rcar-gen3-adas = "7" - -# Custom packages -IMAGE_INSTALL_append_rcar-gen3 = " \ - kernel-modules \ - kernel-devicetree \ - can-utils \ - libsocketcan \ - iproute2 \ - spidev-dbg \ - e2fsprogs \ - e2fsprogs-tune2fs \ - ethtool \ - pciutils \ - usbutils \ - util-linux \ - mtd-utils \ - capture \ - v4l2-fw \ - iperf \ - bonnie++ \ - lmbench \ - strace \ - libpcap \ - eglibc-utils \ - ldd \ - procps \ - can-utils libsocketcan \ - rsync \ - mm-init \ - iio-utils \ - pulseaudio-server \ - pulseaudio-misc \ - pulseaudio-module-cli \ - pulseaudio-module-remap-sink \ - pulseaudio-module-remap-source \ - pulseaudio-module-loopback \ - gstreamer1.0-plugins-good-pulse \ - gdbserver \ - most-tools \ - perf \ - dropbear \ - opkg \ -" - -# Radio packages -IMAGE_INSTALL_append_rcar-gen3 += " \ - si-tools \ - linux-firmware-wl18xx \ - wireless-tools \ - ti-bt \ - ti-bt-firmware \ - bluez5 \ - bluez5-testtools \ - pulseaudio-module-bluez5-device \ - pulseaudio-module-bluez5-discover \ - pulseaudio-module-bluetooth-discover \ - pulseaudio-module-bluetooth-policy \ - ofono \ - ofono-tests \ -" - -# IMP -IMAGE_INSTALL_append_rcar-gen3 += " \ - kernel-module-uio-imp \ - kernel-module-cmemdrv \ - udev-rules-cvlib \ -" - -DISTRO_FEATURES_remove="x11" -DISTRO_FEATURES_append = " surroundview " -DISTRO_FEATURES_append = " opencv-sdk " -DISTRO_FEATURES_append = " bluetooth" -DISTRO_FEATURES_append = " pulseaudio" - -IMAGE_INSTALL_remove = "gtk+3-demo clutter-1.0-examples" - -EXTRA_IMAGE_FEATURES_append_rcar-gen3 = " eclipse-debug" - -PREFERRED_VERSION_opencv = "2.4%" diff --git a/meta-rcar-gen3-adas/recipes-bsp/linux-firmware/linux-firmware_git.bbappend b/meta-rcar-gen3-adas/recipes-bsp/linux-firmware/linux-firmware_git.bbappend deleted file mode 100644 index fdee4b0..0000000 --- a/meta-rcar-gen3-adas/recipes-bsp/linux-firmware/linux-firmware_git.bbappend +++ /dev/null @@ -1,15 +0,0 @@ -LICENSE_${PN}-rtl8188eu = "Firmware-rtlwifi_firmware" - -FILES_${PN}-rtl8188eu = " \ - /lib/firmware/rtlwifi/rtl8188eufw*.bin \ -" - -RDEPENDS_${PN}-rtl8188eu += "${PN}-rtl-license" - -PACKAGES =+ " ${PN}-rtl8188eu" - -FILES_${PN}-ath9k += " \ - /lib/firmware/ath9k_htc/htc*.fw \ -" - - diff --git a/meta-rcar-gen3-adas/recipes-bsp/si-tools/files/si-tools-fm-improvements.patch b/meta-rcar-gen3-adas/recipes-bsp/si-tools/files/si-tools-fm-improvements.patch new file mode 100644 index 0000000..9bbccad --- /dev/null +++ b/meta-rcar-gen3-adas/recipes-bsp/si-tools/files/si-tools-fm-improvements.patch @@ -0,0 +1,184 @@ +FM configuration improvements + +Changes include: +- Add command-line option for selecting FM band plan. The default + band plan is US / Canada. +- Add command-line options for setting FM scanning valid SNR and RSSI + thresholds to allow tweaking sensitivity in poor radio environments. +- Increased seeking scan timeout to 3 seconds, which seems to improve + behavior in poor radio environments where powerful stations may be + far apart. +- Removed explicit setting of FM_SOFTMUTE_SNR_LIMITS, as it seemed + like it might be resulting in odd muting behavior when scanning. +- Changed initial FM frequency if not specified to the minimum of the + band plan. + +Signed-off-by: Scott Murray <scott.murray@konsulko.com> + +diff --git a/si46xx.h b/si46xx.h +index 172ea8b..c32fca4 100644 +--- a/si46xx.h ++++ b/si46xx.h +@@ -83,6 +83,7 @@ + #define SI46XX_PIN_CONFIG_ENABLE 0x0800 + #define SI46XX_FM_SEEK_BAND_BOTTOM 0x3100 + #define SI46XX_FM_SEEK_BAND_TOP 0x3101 ++#define SI46XX_FM_SEEK_FREQUENCY_SPACING 0x3102 + #define SI46XX_FM_VALID_MAX_TUNE_ERROR 0x3200 + #define SI46XX_FM_VALID_RSSI_TIME 0x3201 + #define SI46XX_FM_VALID_RSSI_THRESHOLD 0x3202 +@@ -150,7 +151,7 @@ + #define MAX_SERVICES 32 + #define MAX_COMPONENTS 15 + +-#define TIMEOUT_SEEK 2000 /* mS = 2S */ ++#define TIMEOUT_SEEK 3000 /* mS = 3S */ + #define TIMEOUT_TUNE 500 /* mS = .5S */ + + struct dab_service_t{ +diff --git a/si_ctl.c b/si_ctl.c +index 59dfaf2..f168218 100644 +--- a/si_ctl.c ++++ b/si_ctl.c +@@ -101,6 +101,26 @@ uint32_t frequency_list_ch[] = { CHAN_12A, + CHAN_9D, + CHAN_8B}; + ++// Structure to describe FM band plans, all values in Hz. ++typedef struct { ++ char *name; ++ uint32_t min; ++ uint32_t max; ++ uint32_t step; ++} fm_band_plan_t; ++ ++static fm_band_plan_t known_fm_band_plans[5] = { ++ { .name = "US", .min = 87900000, .max = 107900000, .step = 200000 }, ++ { .name = "JP", .min = 76000000, .max = 95000000, .step = 100000 }, ++ { .name = "EU", .min = 87500000, .max = 108000000, .step = 50000 }, ++ { .name = "ITU-1", .min = 87500000, .max = 108000000, .step = 50000 }, ++ { .name = "ITU-2", .min = 87900000, .max = 107900000, .step = 50000 } ++}; ++ ++static unsigned int fm_band_plan; ++static int fm_snr_threshold = 128; ++static int fm_rssi_threshold = 128; ++ + int init_am(int offset) + { + int ret; +@@ -160,12 +180,32 @@ int init_fm(int offset) + * enable I2S output + */ + si46xx_set_property(SI46XX_PIN_CONFIG_ENABLE, 0x0003); +- //si46xx_set_property(SI46XX_FM_VALID_RSSI_THRESHOLD,0x0000); +- //si46xx_set_property(SI46XX_FM_VALID_SNR_THRESHOLD,0x0000); +- si46xx_set_property(SI46XX_FM_SOFTMUTE_SNR_LIMITS, 0x0000); // set the SNR limits for soft mute attenuation ++ //si46xx_set_property(SI46XX_FM_SOFTMUTE_SNR_LIMITS, 0x0000); // set the SNR limits for soft mute attenuation + si46xx_set_property(SI46XX_FM_TUNE_FE_CFG, 0x0000); // front end switch open +- si46xx_set_property(SI46XX_FM_SEEK_BAND_BOTTOM, 88000 / 10); +- si46xx_set_property(SI46XX_FM_SEEK_BAND_TOP, 108000 / 10); ++ ++ //si46xx_set_property(SI46XX_FM_SEEK_BAND_BOTTOM, 88000 / 10); ++ //si46xx_set_property(SI46XX_FM_SEEK_BAND_TOP, 108000 / 10); ++ if (verbose) ++ fprintf(stderr, "Using FM Bandplan: %s\n", known_fm_band_plans[fm_band_plan].name); ++ si46xx_set_property(SI46XX_FM_SEEK_BAND_BOTTOM, known_fm_band_plans[fm_band_plan].min / 10000); ++ si46xx_set_property(SI46XX_FM_SEEK_BAND_TOP, known_fm_band_plans[fm_band_plan].max / 10000); ++ if (verbose) ++ fprintf(stderr, "Using FM band: %d - %d, %d spacing\n", ++ known_fm_band_plans[fm_band_plan].min / 10000, ++ known_fm_band_plans[fm_band_plan].max / 10000, ++ known_fm_band_plans[fm_band_plan].step / 10000); ++ si46xx_set_property(SI46XX_FM_SEEK_FREQUENCY_SPACING, known_fm_band_plans[fm_band_plan].step / 10000); ++ if (fm_snr_threshold != 128) { ++ if (verbose) ++ fprintf(stderr, "Setting FM valid SNR threshold to %d dB\n", fm_snr_threshold); ++ si46xx_set_property(SI46XX_FM_VALID_SNR_THRESHOLD, fm_snr_threshold); ++ } ++ if (fm_rssi_threshold != 128) { ++ if (verbose) ++ fprintf(stderr, "Setting FM valid RSSI threshold to %d dB\n", fm_rssi_threshold); ++ si46xx_set_property(SI46XX_FM_VALID_RSSI_THRESHOLD, fm_rssi_threshold); ++ } ++ + /* + * rate + */ +@@ -190,6 +230,7 @@ int init_fm(int offset) + + return 0; + } ++ + int init_dab(int offset) + { + int ret; +@@ -245,6 +286,10 @@ int output_help(char *prog_name) + printf(" -l up|down FM/AM seek next station\n"); + printf(" -d FM/AM RSQ status\n"); + printf(" -m FM rds status\n"); ++ printf("Common FM:\n"); ++ printf(" -p bandplan FM bandplan (us, jp, eu, itu-1, itu-2\n"); ++ printf(" -t SNR FM scan valid SNR threshold (-127 to 127 dB)\n"); ++ printf(" -u RSSI FM scan valid RSSI threshold (-127 to 127 dBuV)\n"); + printf("DAB only:\n"); + printf(" -e dab status\n"); + printf(" -f service start service of dab service list\n"); +@@ -354,6 +399,7 @@ int main(int argc, char **argv) + int offset = - 1; + int mode; + int tmp; ++ unsigned int i; + struct dab_digrad_status_t dab_digrad_status; + bool init = false; + bool seek_up = false; +@@ -374,7 +420,7 @@ int main(int argc, char **argv) + + optind = 0; + while (optind < argc) { +- if ((c = getopt(argc, argv, "a:b:c:def:ghi:j:k:l:mnosv")) != -1) { ++ if ((c = getopt(argc, argv, "a:b:c:def:ghi:j:k:l:mnop:st:u:v")) != -1) { + switch(c){ + /* init */ + case 'a': +@@ -422,6 +468,31 @@ int main(int argc, char **argv) + case 'c': + frequency = atoi(optarg); + break; ++ /* FM */ ++ case 'p': ++ for(i = 0; ++ i < sizeof(known_fm_band_plans) / sizeof(fm_band_plan_t); ++ i++) { ++ if(!strcasecmp(optarg, known_fm_band_plans[i].name)) { ++ fm_band_plan = i; ++ break; ++ } ++ } ++ if(i >= (sizeof(known_fm_band_plans) / sizeof(fm_band_plan_t))) { ++ printf("Invalid mode: %s\n", optarg); ++ return -EINVAL; ++ } ++ break; ++ case 't': ++ fm_snr_threshold = atoi(optarg); ++ if(fm_snr_threshold < -128 || fm_snr_threshold > 127) ++ fm_snr_threshold = 128; // use firmware default ++ break; ++ case 'u': ++ fm_rssi_threshold = atoi(optarg); ++ if(fm_rssi_threshold < -128 || fm_rssi_threshold > 127) ++ fm_rssi_threshold = 128; // use firmware default ++ break; + /* DAB stuff. TODO: rework */ + case 'e': + si46xx_dab_digrad_status(&dab_digrad_status); +@@ -473,7 +544,7 @@ int main(int argc, char **argv) + case SI46XX_MODE_FM: + ret = init_fm(offset); + if (frequency < 0) +- frequency = 105500; ++ frequency = known_fm_band_plans[fm_band_plan].min / 1000; + break; + case SI46XX_MODE_AM: + ret = init_am(offset); diff --git a/meta-rcar-gen3-adas/recipes-bsp/si-tools/si-tools.bb b/meta-rcar-gen3-adas/recipes-bsp/si-tools/si-tools.bb index 5db9408..634000a 100644 --- a/meta-rcar-gen3-adas/recipes-bsp/si-tools/si-tools.bb +++ b/meta-rcar-gen3-adas/recipes-bsp/si-tools/si-tools.bb @@ -8,10 +8,13 @@ PV = "0.2" SRC_URI = " \ file://si-tools.tar.gz \ + file://si-tools-fm-improvements.patch \ " S = "${WORKDIR}/si-tools" +EXTRA_OEMAKE_append = " 'LDFLAGS=${LDFLAGS}'" + do_install() { install -d ${D}${bindir} install -d ${D}/lib/firmware/radio/ diff --git a/meta-rcar-gen3-adas/recipes-bsp/ti-bt-firmware/ti-bt-firmware_git.bb b/meta-rcar-gen3-adas/recipes-bsp/ti-bt-firmware/ti-bt-firmware_git.bb deleted file mode 100644 index 3251662..0000000 --- a/meta-rcar-gen3-adas/recipes-bsp/ti-bt-firmware/ti-bt-firmware_git.bb +++ /dev/null @@ -1,25 +0,0 @@ -SUMMARY = "Bluetooth firmare files for WL18xx combo modules" -SECTION = "misc" - -LICENSE = "CLOSED" - -PE = "1" -PV = "0.0" - -SRC_URI = "git://github.com/TI-ECS/bt-firmware.git;protocol=git " -SRCREV = "169b2df5b968f0ede32ea9044859942fc220c435" - -S = "${WORKDIR}/git" - -CLEANBROKEN = "1" - -do_populate_lic[noexec] = "1" -do_compile[noexec] = "1" -do_configure[noexec] = "1" - -do_install() { - install -d ${D}/lib/firmware/ti-connectivity/ - cp *.bts ${D}/lib/firmware/ti-connectivity/ -} - -FILES_${PN} = "/lib/firmware/ti-connectivity/*"
\ No newline at end of file diff --git a/meta-rcar-gen3-adas/recipes-bsp/u-boot/u-boot/0016-tools-fix-build-fail.patch b/meta-rcar-gen3-adas/recipes-bsp/u-boot/u-boot/0016-tools-fix-build-fail.patch deleted file mode 100644 index ab66851..0000000 --- a/meta-rcar-gen3-adas/recipes-bsp/u-boot/u-boot/0016-tools-fix-build-fail.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 34b8d92c5139b37322548cc41c5c3a788c51d3ad Mon Sep 17 00:00:00 2001 -From: Vladimir Barinov <vladimir.barinov@cogentembedded.com> -Date: Tue, 2 May 2017 12:55:23 +0300 -Subject: [PATCH] tools: fix build fail - -Build fail fix for CONFIG_ENV_IS_IN_SPI_FLASH - -Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> ---- - tools/Makefile | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - -diff --git a/tools/Makefile b/tools/Makefile -index 4bbb153..12719ac 100644 ---- a/tools/Makefile -+++ b/tools/Makefile -@@ -211,7 +211,8 @@ HOST_EXTRACFLAGS += -include $(srctree)/include/libfdt_env.h \ - -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \ - -DUSE_HOSTCC \ - -D__KERNEL_STRICT_NAMES \ -- -D_GNU_SOURCE -+ -D_GNU_SOURCE \ -+ -include $(srctree)/include/generated/autoconf.h - - __build: $(LOGO-y) - --- -1.9.1 - diff --git a/meta-rcar-gen3-adas/recipes-bsp/u-boot/u-boot_2015.04.bbappend b/meta-rcar-gen3-adas/recipes-bsp/u-boot/u-boot_2015.04.bbappend index 8171d10..044c598 100644 --- a/meta-rcar-gen3-adas/recipes-bsp/u-boot/u-boot_2015.04.bbappend +++ b/meta-rcar-gen3-adas/recipes-bsp/u-boot/u-boot_2015.04.bbappend @@ -1,5 +1,8 @@ FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:" +BRANCH = "v2015.04/rcar-3.5.9" +SRCREV = "24add58d915191d901915a6a8cc44faa748fcaa2" + SRC_URI_append = " \ file://0001-net-phy-support-fixed-PHY.patch \ ${@bb.utils.contains('MACHINE_FEATURES', 'h3ulcb-had', ' file://0002-net-ravb-remove-APSR-quirk.patch', '', d)} \ @@ -15,7 +18,6 @@ SRC_URI_append = " \ file://0013-mtd-spi-QSPI-flash-support.patch \ file://0014-arm-renesas-Add-Renesas-R8A7797-SoC-support.patch \ file://0015-board-renesas-Add-V3M-Eagle-board.patch \ - file://0016-tools-fix-build-fail.patch \ file://0017-board-renesas-Add-V3MSK-board.patch \ file://0021-ARM-rcar_gen3-Add-RPC-flash-definitions.patch \ file://0022-mtd-Add-RPC-HyperFlash-support.patch \ diff --git a/meta-rcar-gen3-adas/recipes-bsp/utest-apps/files/0001-utest-utest-common.c-Check-return-value-of-write.patch b/meta-rcar-gen3-adas/recipes-bsp/utest-apps/files/0001-utest-utest-common.c-Check-return-value-of-write.patch new file mode 100644 index 0000000..80cf032 --- /dev/null +++ b/meta-rcar-gen3-adas/recipes-bsp/utest-apps/files/0001-utest-utest-common.c-Check-return-value-of-write.patch @@ -0,0 +1,44 @@ +From 1fd2e6ce6a443d20e6a103261860816fa5600591 Mon Sep 17 00:00:00 2001 +From: Tom Rini <trini@konsulko.com> +Date: Wed, 20 Dec 2017 09:58:47 -0500 +Subject: [PATCH 1/1] utest/utest-common.c: Check return value of write() + +Signed-off-by: Tom Rini <trini@konsulko.com> +--- + utest/utest-common.c | 9 ++++++--- + 1 file changed, 6 insertions(+), 3 deletions(-) + +diff --git a/utest/utest-common.c b/utest/utest-common.c +index 38bd4714bccc..922b4bdc40a9 100644 +--- a/utest/utest-common.c ++++ b/utest/utest-common.c +@@ -66,7 +66,7 @@ int intern_trace(const char *format, ...) + struct timespec ts; + static char buffer[4096]; + char *p = buffer; +- int n = sizeof(buffer), k; ++ int n = sizeof(buffer), k, ret; + + /* ...retrieve value of monotonic clock */ + clock_gettime(CLOCK_MONOTONIC, &ts); +@@ -88,12 +88,15 @@ int intern_trace(const char *format, ...) + /* ...output string terminator */ + (n > 0 ? *p++ = '\n' : 0); + +- write(intern_trace_fd, buffer, p - buffer); ++ ret = write(intern_trace_fd, buffer, p - buffer); + + /* ...release tracing lock */ + pthread_mutex_unlock(&intern_trace_mutex); + +- return 0; ++ if (ret != -1) ++ return 0; ++ else ++ return -1; + } + + /* ...tracing facility initialization */ +-- +2.7.4 + diff --git a/meta-rcar-gen3-adas/recipes-bsp/utest-apps/utest-cam-imr-drm.bb b/meta-rcar-gen3-adas/recipes-bsp/utest-apps/utest-cam-imr-drm.bb index 48747ea..4c6be5b 100644 --- a/meta-rcar-gen3-adas/recipes-bsp/utest-apps/utest-cam-imr-drm.bb +++ b/meta-rcar-gen3-adas/recipes-bsp/utest-apps/utest-cam-imr-drm.bb @@ -7,6 +7,7 @@ S = "${WORKDIR}/utest-cam-imr-drm" SRC_URI = " \ file://utest-cam-imr-drm.tar.gz \ + file://0001-utest-utest-common.c-Check-return-value-of-write.patch \ " DEPENDS = " \ diff --git a/meta-rcar-gen3-adas/recipes-connectivity/bluez5/bluez5_%.bbappend b/meta-rcar-gen3-adas/recipes-connectivity/bluez5/bluez5_%.bbappend deleted file mode 100644 index 99b0ede..0000000 --- a/meta-rcar-gen3-adas/recipes-connectivity/bluez5/bluez5_%.bbappend +++ /dev/null @@ -1,16 +0,0 @@ -FILESEXTRAPATHS_append := "${THISDIR}/files:" - -SRC_URI_append_rcar-gen3 = " \ - file://main.conf \ -" - -PACKAGECONFIG_append = " experimental" - -NOINST_TOOLS_EXPERIMENTAL_remove = " tools/bdaddr" - - -do_install_append_rcar-gen3() { - install -d ${D}/etc/bluetooth - - install -m 644 ${WORKDIR}/main.conf ${D}/${sysconfdir}/bluetooth/ -} diff --git a/meta-rcar-gen3-adas/recipes-connectivity/bluez5/files/main.conf b/meta-rcar-gen3-adas/recipes-connectivity/bluez5/files/main.conf deleted file mode 100644 index d3e19f7..0000000 --- a/meta-rcar-gen3-adas/recipes-connectivity/bluez5/files/main.conf +++ /dev/null @@ -1,2 +0,0 @@ -[Policy] -AutoEnable=true diff --git a/meta-rcar-gen3-adas/recipes-core/systemd/systemd/dummy0.network b/meta-rcar-gen3-adas/recipes-core/systemd/systemd/dummy0.network deleted file mode 100644 index 054e17b..0000000 --- a/meta-rcar-gen3-adas/recipes-core/systemd/systemd/dummy0.network +++ /dev/null @@ -1,6 +0,0 @@ -[Match] -Name=dummy0 - -[Network] -DHCP=no - diff --git a/meta-rcar-gen3-adas/recipes-core/systemd/systemd/eth0.network b/meta-rcar-gen3-adas/recipes-core/systemd/systemd/eth0.network deleted file mode 100644 index 74951b4..0000000 --- a/meta-rcar-gen3-adas/recipes-core/systemd/systemd/eth0.network +++ /dev/null @@ -1,8 +0,0 @@ -[Match] -Name=eth0 - -[Network] -DHCP=ipv4 - -[DHCP] -CriticalConnection=true diff --git a/meta-rcar-gen3-adas/recipes-core/systemd/systemd_229.bbappend b/meta-rcar-gen3-adas/recipes-core/systemd/systemd_229.bbappend deleted file mode 100644 index f4dc296..0000000 --- a/meta-rcar-gen3-adas/recipes-core/systemd/systemd_229.bbappend +++ /dev/null @@ -1,22 +0,0 @@ -FILESEXTRAPATHS_append := '${THISDIR}/${PN}:' - -PACKAGECONFIG += " networkd resolved " - -SRC_URI_append = "file://eth0.network" - -SRC_URI_append= '${@ " \ - file://dummy0.network \ -" if 'surroundview' in '${DISTRO_FEATURES}' else ""}' - -FILES_${PN} += "${sysconfdir}/systemd/network/*" - -USERADD_PARAM_${PN} += "; --system systemd-network " - -do_install_append() { - - install -d ${D}${sysconfdir}/systemd/network/ - - install -m 0644 ${WORKDIR}/*.network ${D}${sysconfdir}/systemd/network/ -} - -PR="r2" diff --git a/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/0001-Remove-tests-that-fail-to-build-on-some-PPC32-config.patch b/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/0001-Remove-tests-that-fail-to-build-on-some-PPC32-config.patch deleted file mode 100644 index a78e195..0000000 --- a/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/0001-Remove-tests-that-fail-to-build-on-some-PPC32-config.patch +++ /dev/null @@ -1,51 +0,0 @@ -From 9762fd23e1f1db66d4b977c694a17d3bca3fe99a Mon Sep 17 00:00:00 2001 -From: Alexander Kanavin <alex.kanavin@gmail.com> -Date: Fri, 8 Jan 2016 16:36:29 +0200 -Subject: [PATCH] Remove tests that fail to build on some PPC32 configurations - -Failures are documented here: -http://errors.yoctoproject.org/Errors/Search/?items=10&query=862d702fbb99e484631315aa44b9e46f8fc567da&filter=valgrind&type=recipe - -Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> -Upstream-Status: Pending ---- - memcheck/tests/ppc32/Makefile.am | 2 +- - none/tests/ppc32/Makefile.am | 4 ++-- - 2 files changed, 3 insertions(+), 3 deletions(-) - -diff --git a/memcheck/tests/ppc32/Makefile.am b/memcheck/tests/ppc32/Makefile.am -index 26b95a2..8f05743 100644 ---- a/memcheck/tests/ppc32/Makefile.am -+++ b/memcheck/tests/ppc32/Makefile.am -@@ -10,7 +10,7 @@ EXTRA_DIST = $(noinst_SCRIPTS) \ - power_ISA2_07.stderr.exp power_ISA2_07.vgtest - - check_PROGRAMS = \ -- power_ISA2_05 power_ISA2_07 -+ power_ISA2_07 - - power_ISA2_05_CFLAGS = $(AM_CFLAGS) $(WERROR) -Winline -Wall -Wshadow -g \ - -I$(top_srcdir)/include @FLAG_M32@ -diff --git a/none/tests/ppc32/Makefile.am b/none/tests/ppc32/Makefile.am -index 196239e..0fe3425 100644 ---- a/none/tests/ppc32/Makefile.am -+++ b/none/tests/ppc32/Makefile.am -@@ -50,13 +50,13 @@ EXTRA_DIST = \ - - check_PROGRAMS = \ - allexec \ -- lsw jm-insns round \ -+ lsw \ - test_isa_2_06_part1 test_isa_2_06_part2 test_isa_2_06_part3 \ - test_dfp1 test_dfp2 test_dfp3 test_dfp4 test_dfp5 \ - test_isa_2_07_part1 test_isa_2_07_part2 \ - test_tm test_touch_tm ldst_multiple data-cache-instructions \ - test_fx test_gx \ -- testVMX twi tw xlc_dbl_u32 power5+_round power6_bcmp \ -+ twi tw xlc_dbl_u32 power6_bcmp \ - bug129390-ppc32 bug139050-ppc32 \ - ldstrev mftocrf mcrfs - --- -2.6.4 - diff --git a/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/0001-fix-build-for-musl-targets.patch b/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/0001-fix-build-for-musl-targets.patch deleted file mode 100644 index dc6feff..0000000 --- a/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/0001-fix-build-for-musl-targets.patch +++ /dev/null @@ -1,69 +0,0 @@ -From 1b1a024efd18d44294e184e792c1e039cab02bfe Mon Sep 17 00:00:00 2001 -From: Khem Raj <raj.khem@gmail.com> -Date: Sun, 14 Feb 2016 09:14:12 +0000 -Subject: [PATCH] fix build for musl targets - -Signed-off-by: Khem Raj <raj.khem@gmail.com> ---- -Upstream-Status: Pending - - configure.ac | 2 -- - coregrind/vg_preloaded.c | 2 +- - include/pub_tool_redir.h | 7 +++++-- - 3 files changed, 6 insertions(+), 5 deletions(-) - -diff --git a/configure.ac b/configure.ac -index 9366dc7..679f514 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -1066,8 +1066,6 @@ case "${GLIBC_VERSION}" in - ;; - 2.0|2.1|*) - AC_MSG_RESULT([unsupported version ${GLIBC_VERSION}]) -- AC_MSG_ERROR([Valgrind requires glibc version 2.2 or later,]) -- AC_MSG_ERROR([Darwin libc, Bionic libc or Solaris libc]) - ;; - esac - -diff --git a/coregrind/vg_preloaded.c b/coregrind/vg_preloaded.c -index 2ea7a7a..e49c832 100644 ---- a/coregrind/vg_preloaded.c -+++ b/coregrind/vg_preloaded.c -@@ -56,7 +56,7 @@ - void VG_NOTIFY_ON_LOAD(freeres)( void ); - void VG_NOTIFY_ON_LOAD(freeres)( void ) - { --# if !defined(__UCLIBC__) \ -+# if !defined(__UCLIBC__) && defined(__GLIBC__) \ - && !defined(VGPV_arm_linux_android) \ - && !defined(VGPV_x86_linux_android) \ - && !defined(VGPV_mips32_linux_android) \ -diff --git a/include/pub_tool_redir.h b/include/pub_tool_redir.h -index bac00d7..fbb2ef2 100644 ---- a/include/pub_tool_redir.h -+++ b/include/pub_tool_redir.h -@@ -242,8 +242,7 @@ - /* --- Soname of the standard C library. --- */ - - #if defined(VGO_linux) || defined(VGO_solaris) --# define VG_Z_LIBC_SONAME libcZdsoZa // libc.so* -- -+# define VG_Z_LIBC_SONAME libcZdZa // libc.* - #elif defined(VGO_darwin) && (DARWIN_VERS <= DARWIN_10_6) - # define VG_Z_LIBC_SONAME libSystemZdZaZddylib // libSystem.*.dylib - -@@ -274,7 +273,11 @@ - /* --- Soname of the pthreads library. --- */ - - #if defined(VGO_linux) -+# if defined(__GLIBC__) || defined(__UCLIBC__) - # define VG_Z_LIBPTHREAD_SONAME libpthreadZdsoZd0 // libpthread.so.0 -+# else -+# define VG_Z_LIBPTHREAD_SONAME libcZdZa // libc.* -+#endif - #elif defined(VGO_darwin) - # define VG_Z_LIBPTHREAD_SONAME libSystemZdZaZddylib // libSystem.*.dylib - #elif defined(VGO_solaris) --- -2.7.1 - diff --git a/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/0002-remove-rpath.patch b/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/0002-remove-rpath.patch deleted file mode 100644 index e9112da..0000000 --- a/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/0002-remove-rpath.patch +++ /dev/null @@ -1,35 +0,0 @@ -From f96cf1f4eaa72860ab8b5e18ad10fdc704d78c5f Mon Sep 17 00:00:00 2001 -From: Alexander Kanavin <alex.kanavin@gmail.com> -Date: Tue, 15 Dec 2015 15:01:34 +0200 -Subject: [PATCH 2/5] remove rpath - -Upstream-Status: Inappropriate [embedded config] -Signed-off-by: Saul Wold <sgw@linux.intel.com> ---- - none/tests/Makefile.am | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - -diff --git a/none/tests/Makefile.am b/none/tests/Makefile.am -index 54f2a7e..25b0f49 100644 ---- a/none/tests/Makefile.am -+++ b/none/tests/Makefile.am -@@ -326,7 +326,6 @@ threadederrno_CFLAGS += --std=c99 - endif - tls_SOURCES = tls.c tls2.c - tls_DEPENDENCIES = tls.so tls2.so --tls_LDFLAGS = -Wl,-rpath,$(abs_top_builddir)/none/tests - tls_LDADD = tls.so tls2.so -lpthread - tls_so_SOURCES = tls_so.c - tls_so_DEPENDENCIES = tls2.so -@@ -334,7 +333,7 @@ if VGCONF_OS_IS_DARWIN - tls_so_LDFLAGS = -dynamic -dynamiclib -all_load -fpic - tls_so_LDADD = `pwd`/tls2.so - else -- tls_so_LDFLAGS = -Wl,-rpath,$(abs_top_builddir)/none/tests -shared -fPIC -+ tls_so_LDFLAGS = -shared -fPIC - tls_so_LDADD = tls2.so - endif - tls_so_CFLAGS = $(AM_CFLAGS) -fPIC --- -2.6.2 - diff --git a/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/0004-Fix-out-of-tree-builds.patch b/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/0004-Fix-out-of-tree-builds.patch deleted file mode 100644 index ed313d6..0000000 --- a/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/0004-Fix-out-of-tree-builds.patch +++ /dev/null @@ -1,175 +0,0 @@ -From 38ae233b6893a4eec7f9ed6d8ad02392bca8eaed Mon Sep 17 00:00:00 2001 -From: Alexander Kanavin <alex.kanavin@gmail.com> -Date: Tue, 15 Dec 2015 15:31:50 +0200 -Subject: [PATCH 1/2] Fix out of tree builds. - -The paths to these files need to be fully specified in -the out of tree build case. glibc-2.X.supp is a generated file so the full path -is deliberately not specified in that case. - -RP 2013/03/23 - -Upstream-Status: Pending -Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> - ---- - configure.ac | 64 ++++++++++++++++++++++++++++++------------------------------ - 1 file changed, 32 insertions(+), 32 deletions(-) - -diff --git a/configure.ac b/configure.ac -index 8ab7f9b..9366dc7 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -377,44 +377,44 @@ case "${host_os}" in - 9.*) - AC_MSG_RESULT([Darwin 9.x (${kernel}) / Mac OS X 10.5 Leopard]) - AC_DEFINE([DARWIN_VERS], DARWIN_10_5, [Darwin / Mac OS X version]) -- DEFAULT_SUPP="darwin9.supp ${DEFAULT_SUPP}" -- DEFAULT_SUPP="darwin9-drd.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/darwin9.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/darwin9-drd.supp ${DEFAULT_SUPP}" - ;; - 10.*) - AC_MSG_RESULT([Darwin 10.x (${kernel}) / Mac OS X 10.6 Snow Leopard]) - AC_DEFINE([DARWIN_VERS], DARWIN_10_6, [Darwin / Mac OS X version]) -- DEFAULT_SUPP="darwin10.supp ${DEFAULT_SUPP}" -- DEFAULT_SUPP="darwin10-drd.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/darwin10.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/darwin10-drd.supp ${DEFAULT_SUPP}" - ;; - 11.*) - AC_MSG_RESULT([Darwin 11.x (${kernel}) / Mac OS X 10.7 Lion]) - AC_DEFINE([DARWIN_VERS], DARWIN_10_7, [Darwin / Mac OS X version]) -- DEFAULT_SUPP="darwin11.supp ${DEFAULT_SUPP}" -- DEFAULT_SUPP="darwin10-drd.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/darwin11.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/darwin10-drd.supp ${DEFAULT_SUPP}" - ;; - 12.*) - AC_MSG_RESULT([Darwin 12.x (${kernel}) / Mac OS X 10.8 Mountain Lion]) - AC_DEFINE([DARWIN_VERS], DARWIN_10_8, [Darwin / Mac OS X version]) -- DEFAULT_SUPP="darwin12.supp ${DEFAULT_SUPP}" -- DEFAULT_SUPP="darwin10-drd.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/darwin12.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/darwin10-drd.supp ${DEFAULT_SUPP}" - ;; - 13.*) - AC_MSG_RESULT([Darwin 13.x (${kernel}) / Mac OS X 10.9 Mavericks]) - AC_DEFINE([DARWIN_VERS], DARWIN_10_9, [Darwin / Mac OS X version]) -- DEFAULT_SUPP="darwin13.supp ${DEFAULT_SUPP}" -- DEFAULT_SUPP="darwin10-drd.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/darwin13.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/darwin10-drd.supp ${DEFAULT_SUPP}" - ;; - 14.*) - AC_MSG_RESULT([Darwin 14.x (${kernel}) / Mac OS X 10.10 Yosemite]) - AC_DEFINE([DARWIN_VERS], DARWIN_10_10, [Darwin / Mac OS X version]) -- DEFAULT_SUPP="darwin14.supp ${DEFAULT_SUPP}" -- DEFAULT_SUPP="darwin10-drd.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/darwin14.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/darwin10-drd.supp ${DEFAULT_SUPP}" - ;; - 15.*) - AC_MSG_RESULT([Darwin 15.x (${kernel}) / Mac OS X 10.11 El Capitan]) - AC_DEFINE([DARWIN_VERS], DARWIN_10_11, [Darwin / Mac OS X version]) -- DEFAULT_SUPP="darwin15.supp ${DEFAULT_SUPP}" -- DEFAULT_SUPP="darwin10-drd.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/darwin15.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/darwin10-drd.supp ${DEFAULT_SUPP}" - ;; - *) - AC_MSG_RESULT([unsupported (${kernel})]) -@@ -426,13 +426,13 @@ case "${host_os}" in - solaris2.11*) - AC_MSG_RESULT([ok (${host_os})]) - VGCONF_OS="solaris" -- DEFAULT_SUPP="solaris11.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/solaris11.supp ${DEFAULT_SUPP}" - ;; - - solaris2.12*) - AC_MSG_RESULT([ok (${host_os})]) - VGCONF_OS="solaris" -- DEFAULT_SUPP="solaris12.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/solaris12.supp ${DEFAULT_SUPP}" - ;; - - *) -@@ -1015,29 +1015,29 @@ AC_MSG_CHECKING([the glibc version]) - case "${GLIBC_VERSION}" in - 2.2) - AC_MSG_RESULT(${GLIBC_VERSION} family) -- DEFAULT_SUPP="glibc-2.2.supp ${DEFAULT_SUPP}" -- DEFAULT_SUPP="glibc-2.2-LinuxThreads-helgrind.supp ${DEFAULT_SUPP}" -- DEFAULT_SUPP="glibc-2.X-drd.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/glibc-2.2.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/glibc-2.2-LinuxThreads-helgrind.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/glibc-2.X-drd.supp ${DEFAULT_SUPP}" - ;; - 2.[[3-6]]) - AC_MSG_RESULT(${GLIBC_VERSION} family) -- DEFAULT_SUPP="glibc-${GLIBC_VERSION}.supp ${DEFAULT_SUPP}" -- DEFAULT_SUPP="glibc-2.34567-NPTL-helgrind.supp ${DEFAULT_SUPP}" -- DEFAULT_SUPP="glibc-2.X-drd.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/glibc-${GLIBC_VERSION}.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/glibc-2.34567-NPTL-helgrind.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/glibc-2.X-drd.supp ${DEFAULT_SUPP}" - ;; - 2.[[7-9]]) - AC_MSG_RESULT(${GLIBC_VERSION} family) - DEFAULT_SUPP="glibc-2.X.supp ${DEFAULT_SUPP}" -- DEFAULT_SUPP="glibc-2.34567-NPTL-helgrind.supp ${DEFAULT_SUPP}" -- DEFAULT_SUPP="glibc-2.X-drd.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/glibc-2.34567-NPTL-helgrind.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/glibc-2.X-drd.supp ${DEFAULT_SUPP}" - ;; - 2.10|2.11) - AC_MSG_RESULT(${GLIBC_VERSION} family) - AC_DEFINE([GLIBC_MANDATORY_STRLEN_REDIRECT], 1, - [Define to 1 if strlen() has been optimized heavily (amd64 glibc >= 2.10)]) - DEFAULT_SUPP="glibc-2.X.supp ${DEFAULT_SUPP}" -- DEFAULT_SUPP="glibc-2.34567-NPTL-helgrind.supp ${DEFAULT_SUPP}" -- DEFAULT_SUPP="glibc-2.X-drd.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/glibc-2.34567-NPTL-helgrind.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/glibc-2.X-drd.supp ${DEFAULT_SUPP}" - ;; - 2.*) - AC_MSG_RESULT(${GLIBC_VERSION} family) -@@ -1046,8 +1046,8 @@ case "${GLIBC_VERSION}" in - AC_DEFINE([GLIBC_MANDATORY_INDEX_AND_STRLEN_REDIRECT], 1, - [Define to 1 if index() and strlen() have been optimized heavily (x86 glibc >= 2.12)]) - DEFAULT_SUPP="glibc-2.X.supp ${DEFAULT_SUPP}" -- DEFAULT_SUPP="glibc-2.34567-NPTL-helgrind.supp ${DEFAULT_SUPP}" -- DEFAULT_SUPP="glibc-2.X-drd.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/glibc-2.34567-NPTL-helgrind.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/glibc-2.X-drd.supp ${DEFAULT_SUPP}" - ;; - darwin) - AC_MSG_RESULT(Darwin) -@@ -1057,7 +1057,7 @@ case "${GLIBC_VERSION}" in - bionic) - AC_MSG_RESULT(Bionic) - AC_DEFINE([BIONIC_LIBC], 1, [Define to 1 if you're using Bionic]) -- DEFAULT_SUPP="bionic.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/bionic.supp ${DEFAULT_SUPP}" - ;; - solaris) - AC_MSG_RESULT(Solaris) -@@ -1079,11 +1079,11 @@ if test "$VGCONF_OS" != "solaris"; then - # attempt to detect whether such libraries are installed on the - # build machine (or even if any X facilities are present); just - # add the suppressions antidisirregardless. -- DEFAULT_SUPP="xfree-4.supp ${DEFAULT_SUPP}" -- DEFAULT_SUPP="xfree-3.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/xfree-4.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/xfree-3.supp ${DEFAULT_SUPP}" - - # Add glibc and X11 suppressions for exp-sgcheck -- DEFAULT_SUPP="exp-sgcheck.supp ${DEFAULT_SUPP}" -+ DEFAULT_SUPP="$srcdir/exp-sgcheck.supp ${DEFAULT_SUPP}" - fi - - --- -2.6.2 - diff --git a/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/0005-Modify-vg_test-wrapper-to-support-PTEST-formats.patch b/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/0005-Modify-vg_test-wrapper-to-support-PTEST-formats.patch deleted file mode 100644 index 7985308..0000000 --- a/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/0005-Modify-vg_test-wrapper-to-support-PTEST-formats.patch +++ /dev/null @@ -1,252 +0,0 @@ -From f49f27f1bc67d07440b0ac9a7d767a8ea1589bfe Mon Sep 17 00:00:00 2001 -From: Alexander Kanavin <alex.kanavin@gmail.com> -Date: Tue, 15 Dec 2015 15:50:44 +0200 -Subject: [PATCH 5/5] Modify vg_test wrapper to support PTEST formats - -Change the valgrind regression test script vg_regtest to -support the yocto ptest stdout reporting format. The commit adds -'--yocto-ptest' as an optional argument to vg_regtest, which alters -the output to use the ptest infrastructure reporting format: - "[PASS|SKIP|FAIL]: testname" -instead of valgrind's internal test reporting format. Without the added -option, --yocto-ptest, the valgrind regression test output is unchanged. - -Enforce 30 seconds limit for the test. -This resume execution of the remaining tests when valgrind hangs. - -Upstream-Status: Pending - -Signed-off-by: Dave Lerner <dave.lerner@windriver.com> -Signed-off-by: Tudor Florea <tudor.florea@enea.com> -Signed-off-by: Alexander Kanavin <alex.kanavin@gmail.com> ---- - tests/vg_regtest.in | 75 +++++++++++++++++++++++++++++++++++++++-------------- - 1 file changed, 55 insertions(+), 20 deletions(-) - -diff --git a/tests/vg_regtest.in b/tests/vg_regtest.in -index a441f42..cb05b52 100755 ---- a/tests/vg_regtest.in -+++ b/tests/vg_regtest.in -@@ -47,6 +47,7 @@ - # --loop-till-fail: loops on the test(s) till one fail, then exit - # This is useful to obtain detailed trace or --keep-unfiltered - # output of a non deterministic test failure -+# --yocto-ptest: output in yocto ptest format - # - # The easiest way is to run all tests in valgrind/ with (assuming you installed - # in $PREFIX): -@@ -139,7 +140,7 @@ my $usage="\n" - . "Usage:\n" - . " vg_regtest [--all, --valgrind, --valgrind-lib, --keep-unfiltered\n" - . " --outer-valgrind, --outer-tool, --outer-args\n" -- . " --loop-till-fail]\n" -+ . " --loop-till-fail, --yocto-ptest]\n" - . " Use EXTRA_REGTEST_OPTS to supply extra args for all tests\n" - . "\n"; - -@@ -186,6 +187,7 @@ my $outer_args; - my $valgrind_lib = "$tests_dir/.in_place"; - my $keepunfiltered = 0; - my $looptillfail = 0; -+my $yoctoptest = 0; - - # default filter is the one named "filter_stderr" in the test's directory - my $default_stderr_filter = "filter_stderr"; -@@ -244,6 +246,8 @@ sub process_command_line() - $keepunfiltered = 1; - } elsif ($arg =~ /^--loop-till-fail$/) { - $looptillfail = 1; -+ } elsif ($arg =~ /^--yocto-ptest$/) { -+ $yoctoptest = 1; - } else { - die $usage; - } -@@ -365,13 +369,28 @@ sub read_vgtest_file($) - #---------------------------------------------------------------------------- - # Since most of the program time is spent in system() calls, need this to - # propagate a Ctrl-C enabling us to quit. --sub mysystem($) -+# Enforce 30 seconds limit for the test. -+# This resume execution of the remaining tests if valgrind hangs. -+sub mysystem($) - { -- my $exit_code = system($_[0]); -- ($exit_code == 2) and exit 1; # 2 is SIGINT -- return $exit_code; -+ my $exit_code=0; -+ eval { -+ local $SIG{'ALRM'} = sub { die "timed out\n" }; -+ alarm(30); -+ $exit_code = system($_[0]); -+ alarm (0); -+ ($exit_code == 2) and die "SIGINT\n"; # 2 is SIGINT -+ }; -+ if ($@) { -+ if ($@ eq "timed out\n") { -+ print "timed out\n"; -+ return 1; -+ } -+ if ($@ eq "SIGINT\n") { -+ exit 1; -+ } -+ } - } -- - # if $keepunfiltered, copies $1 to $1.unfiltered.out - # renames $0 tp $1 - sub filtered_rename($$) -@@ -419,23 +438,25 @@ sub do_diffs($$$$) - # A match; remove .out and any previously created .diff files. - unlink("$name.$mid.out"); - unlink(<$name.$mid.diff*>); -- return; -+ return 0; - } - } - } - # If we reach here, none of the .exp files matched. -- print "*** $name failed ($mid) ***\n"; -+ print "*** $name failed ($mid) ***\n" if ($yoctoptest == 0) ; - push(@failures, sprintf("%-40s ($mid)", "$fullname")); - $num_failures{$mid}++; - if ($looptillfail == 1) { - print "Failure encountered, stopping to loop\n"; - exit 1 - } -+ return 1; - } - - sub do_one_test($$) - { - my ($dir, $vgtest) = @_; -+ my $diffStatus = 0; - $vgtest =~ /^(.*)\.vgtest/; - my $name = $1; - my $fullname = "$dir/$name"; -@@ -454,7 +475,11 @@ sub do_one_test($$) - } elsif (256 == $prereq_res) { - # Nb: weird Perl-ism -- exit code of '1' is seen by Perl as 256... - # Prereq failed, skip. -- printf("%-16s (skipping, prereq failed: $prereq)\n", "$name:"); -+ if ($yoctoptest == 0) { -+ printf("%-16s (skipping, prereq failed: $prereq)\n", "$name:"); -+ } else { -+ printf("SKIP: $fullname\n"); -+ } - return; - } else { - # Bad prereq; abort. -@@ -472,7 +497,7 @@ sub do_one_test($$) - } - # If there is a progB, let's start it in background: - printf("%-16s valgrind $extraopts $vgopts $prog $args (progB: $progB $argsB)\n", -- "$name:"); -+ "$name:") if ($yoctoptest == 0); - # progB.done used to detect child has finished. See below. - # Note: redirection of stdout and stderr is before $progB to allow argsB - # to e.g. redirect stdoutB to stderrB -@@ -488,7 +513,8 @@ sub do_one_test($$) - . "touch progB.done) &"); - } - } else { -- printf("%-16s valgrind $extraopts $vgopts $prog $args\n", "$name:"); -+ printf("%-16s valgrind $extraopts $vgopts $prog $args\n", "$name:") -+ if ($yoctoptest == 0); - } - - # Collect environment variables, if any. -@@ -529,7 +555,7 @@ sub do_one_test($$) - # Find all the .stdout.exp files. If none, use /dev/null. - my @stdout_exps = <$name.stdout.exp*>; - @stdout_exps = ( "/dev/null" ) if (0 == scalar @stdout_exps); -- do_diffs($fullname, $name, "stdout", \@stdout_exps); -+ $diffStatus |= do_diffs($fullname, $name, "stdout", \@stdout_exps); - - # Filter stderr - $stderr_filter_args = $name if (! defined $stderr_filter_args); -@@ -538,7 +564,7 @@ sub do_one_test($$) - # Find all the .stderr.exp files. At least one must exist. - my @stderr_exps = <$name.stderr.exp*>; - (0 != scalar @stderr_exps) or die "Could not find `$name.stderr.exp*'\n"; -- do_diffs($fullname, $name, "stderr", \@stderr_exps); -+ $diffStatus |= do_diffs($fullname, $name, "stderr", \@stderr_exps); - - if (defined $progB) { - # wait for the child to be finished -@@ -562,7 +588,7 @@ sub do_one_test($$) - # Find all the .stdoutB.exp files. If none, use /dev/null. - my @stdoutB_exps = <$name.stdoutB.exp*>; - @stdoutB_exps = ( "/dev/null" ) if (0 == scalar @stdoutB_exps); -- do_diffs($fullname, $name, "stdoutB", \@stdoutB_exps); -+ $diffStatus |= do_diffs($fullname, $name, "stdoutB", \@stdoutB_exps); - - # Filter stderr - $stderrB_filter_args = $name if (! defined $stderrB_filter_args); -@@ -571,7 +597,7 @@ sub do_one_test($$) - # Find all the .stderrB.exp files. At least one must exist. - my @stderrB_exps = <$name.stderrB.exp*>; - (0 != scalar @stderrB_exps) or die "Could not find `$name.stderrB.exp*'\n"; -- do_diffs($fullname, $name, "stderrB", \@stderrB_exps); -+ $diffStatus |= do_diffs($fullname, $name, "stderrB", \@stderrB_exps); - } - - # Maybe do post-test check -@@ -583,7 +609,7 @@ sub do_one_test($$) - # Find all the .post.exp files. If none, use /dev/null. - my @post_exps = <$name.post.exp*>; - @post_exps = ( "/dev/null" ) if (0 == scalar @post_exps); -- do_diffs($fullname, $name, "post", \@post_exps); -+ $diffStatus |= do_diffs($fullname, $name, "post", \@post_exps); - } - } - -@@ -592,6 +618,13 @@ sub do_one_test($$) - print("(cleanup operation failed: $cleanup)\n"); - } - -+ if ($yoctoptest == 1) { -+ if ($diffStatus == 0) { -+ print("PASS: $fullname\n"); -+ } else { -+ print("FAIL: $fullname\n"); -+ } -+ } - $num_tests_done++; - } - -@@ -631,7 +664,7 @@ sub test_one_dir($$) - my $found_tests = (0 != (grep { $_ =~ /\.vgtest$/ } @fs)); - - if ($found_tests) { -- print "-- Running tests in $full_dir $dashes\n"; -+ print "-- Running tests in $full_dir $dashes\n" if ($yoctoptest == 0); - } - foreach my $f (@fs) { - if (-d $f) { -@@ -641,7 +674,7 @@ sub test_one_dir($$) - } - } - if ($found_tests) { -- print "-- Finished tests in $full_dir $dashes\n"; -+ print "-- Finished tests in $full_dir $dashes\n" if ($yoctoptest == 0); - } - - chdir(".."); -@@ -667,10 +700,12 @@ sub summarise_results - $num_failures{"stdout"}, plural($num_failures{"stdout"}), - $num_failures{"stderrB"}, plural($num_failures{"stderrB"}), - $num_failures{"stdoutB"}, plural($num_failures{"stdoutB"}), -- $num_failures{"post"}, plural($num_failures{"post"})); -+ $num_failures{"post"}, plural($num_failures{"post"})) -+ if ($yoctoptest == 0); - - foreach my $failure (@failures) { -- print "$failure\n"; -+ print "$failure\n" -+ if ($yoctoptest == 0); - } - print "\n"; - } --- -2.6.2 - diff --git a/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/Added-support-for-PPC-instructions-mfatbu-mfatbl.patch b/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/Added-support-for-PPC-instructions-mfatbu-mfatbl.patch deleted file mode 100644 index 07774f3..0000000 --- a/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/Added-support-for-PPC-instructions-mfatbu-mfatbl.patch +++ /dev/null @@ -1,96 +0,0 @@ -From 0bf4b0ac18d1ea41b32ad781d214b295ca1998f3 Mon Sep 17 00:00:00 2001 -From: Aneesh Bansal <aneesh.bansal@freescale.com> -Date: Mon, 21 Nov 2011 17:31:39 +0530 -Subject: [PATCH] Added support for PPC instructions mfatbu, mfatbl. - -Upstream-Status: Pending - -Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com> ---- -Currently Valgrind 3.7.0 does not have support for PPC instructions mfatbu and mfatbl. When we run a USDPAA application with VALGRIND, the following error is given by valgrind : -dis_proc_ctl(ppc)(mfspr,SPR)(0x20F) -disInstr(ppc): unhandled instruction: 0x7C0F82A6 - - - VEX/priv/guest_ppc_defs.h | 2 ++ - VEX/priv/guest_ppc_helpers.c | 18 ++++++++++++++++++ - VEX/priv/guest_ppc_toIR.c | 22 ++++++++++++++++++++++ - 3 files changed, 42 insertions(+), 0 deletions(-) - -diff --git a/VEX/priv/guest_ppc_defs.h b/VEX/priv/guest_ppc_defs.h -index dd3c62e..11a34aa 100644 ---- a/VEX/priv/guest_ppc_defs.h -+++ b/VEX/priv/guest_ppc_defs.h -@@ -146,6 +146,8 @@ extern UInt ppc32g_dirtyhelper_MFSPR_268_269 ( UInt ); - - extern UInt ppc32g_dirtyhelper_MFSPR_287 ( void ); - -+extern UInt ppc32g_dirtyhelper_MFSPR_526_527 ( UInt ); -+ - extern void ppc32g_dirtyhelper_LVS ( VexGuestPPC32State* gst, - UInt vD_idx, UInt sh, - UInt shift_right ); -diff --git a/VEX/priv/guest_ppc_helpers.c b/VEX/priv/guest_ppc_helpers.c -index 11aa428..b49ea3f 100644 ---- a/VEX/priv/guest_ppc_helpers.c -+++ b/VEX/priv/guest_ppc_helpers.c -@@ -119,6 +119,24 @@ UInt ppc32g_dirtyhelper_MFSPR_287 ( void ) - # endif - } - -+/* CALLED FROM GENERATED CODE */ -+/* DIRTY HELPER (non-referentially transparent) */ -+UInt ppc32g_dirtyhelper_MFSPR_526_527 ( UInt r527 ) -+{ -+# if defined(__powerpc__) || defined(_AIX) -+ UInt spr; -+ if (r527) { -+ __asm__ __volatile__("mfspr %0,527" : "=b"(spr)); -+ } else { -+ __asm__ __volatile__("mfspr %0,526" : "=b"(spr)); -+ } -+ return spr; -+# else -+ return 0; -+# endif -+} -+ -+ - - /* CALLED FROM GENERATED CODE */ - /* DIRTY HELPER (reads guest state, writes guest mem) */ -diff --git a/VEX/priv/guest_ppc_toIR.c b/VEX/priv/guest_ppc_toIR.c -index f8d220d..37c8974 100644 ---- a/VEX/priv/guest_ppc_toIR.c -+++ b/VEX/priv/guest_ppc_toIR.c -@@ -5657,6 +5657,28 @@ static Bool dis_proc_ctl ( VexAbiInfo* vbi, UInt theInstr ) - break; - } - -+ -+ case 526 /* 0x20E */: -+ case 527 /* 0x20F */: { -+ UInt arg = SPR==526 ? 0 : 1; -+ IRTemp val = newTemp(Ity_I32); -+ IRExpr** args = mkIRExprVec_1( mkU32(arg) ); -+ IRDirty* d = unsafeIRDirty_1_N( -+ val, -+ 0/*regparms*/, -+ "ppc32g_dirtyhelper_MFSPR_526_527", -+ fnptr_to_fnentry -+ (vbi, &ppc32g_dirtyhelper_MFSPR_526_527), -+ args -+ ); -+ /* execute the dirty call, dumping the result in val. */ -+ stmt( IRStmt_Dirty(d) ); -+ putIReg( rD_addr, -+ mkWidenFrom32(ty, mkexpr(val), False/*unsigned*/) ); -+ DIP("mfspr r%u,%u", rD_addr, (UInt)SPR); -+ break; -+ } -+ - default: - vex_printf("dis_proc_ctl(ppc)(mfspr,SPR)(0x%x)\n", SPR); - return False; --- -1.7.0.4 diff --git a/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/avoid-neon-for-targets-which-don-t-support-it.patch b/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/avoid-neon-for-targets-which-don-t-support-it.patch deleted file mode 100644 index 5fcfec0..0000000 --- a/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/avoid-neon-for-targets-which-don-t-support-it.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 8facc29c3c56e6cf9cfef70986cf73876044a3fb Mon Sep 17 00:00:00 2001 -From: Andre McCurdy <armccurdy@gmail.com> -Date: Tue, 19 Jan 2016 16:42:36 -0800 -Subject: [PATCH] avoid neon for targets which don't support it - -The sh-mem-random.c test app tries to use neon loads and stores to -test 64-bit float copies when building for ARM. Allow it to do so if -possible, but fallback to C when building for ARM targets which don't -support neon. - -Upstream-Status: Pending - -Signed-off-by: Andre McCurdy <armccurdy@gmail.com> ---- - memcheck/tests/sh-mem-random.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/memcheck/tests/sh-mem-random.c b/memcheck/tests/sh-mem-random.c -index ae82248..816e139 100644 ---- a/memcheck/tests/sh-mem-random.c -+++ b/memcheck/tests/sh-mem-random.c -@@ -191,7 +191,7 @@ void do_test_at ( U1* arr ) - "emms" - : : "r"(arr+dst), "r"(arr+src) : "memory" - ); --#elif defined(__linux__) && defined(__arm__) && !defined(__aarch64__) -+#elif defined(__linux__) && defined(__arm__) && defined(__ARM_NEON__) && !defined(__aarch64__) - /* On arm32, many compilers generate a 64-bit float move - using two 32 bit integer registers, which completely - defeats this test. Hence force a 64-bit NEON load and --- -1.9.1 - diff --git a/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/fixed-perl-path.patch b/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/fixed-perl-path.patch deleted file mode 100644 index b431d33..0000000 --- a/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/fixed-perl-path.patch +++ /dev/null @@ -1,78 +0,0 @@ -From 67e7a690107efb16d6d5aebfe420b64a552accdf Mon Sep 17 00:00:00 2001 -From: Qing He <qing.he@intel.com> -Date: Tue, 31 Aug 2010 22:51:58 +0800 -Subject: [PATCH] valgrind: fix perl scripts - -this is a temporary patch to workaround cross compilation. -otherwise @PERL@ will be replaced to perl-native binary, -this creates unusable scripts and fails FILERDEPENDS mechanism -(esp. rpm) - -a better fix would need: - 1. configure.ac should differentiate PERL and HOSTPERL - 2. optionally remove ${STAGING_DIR} in #! line before do_install - -8/31/2010 - created by Qing He <qing.he@intel.com> - -Upstream-Status: Inappropriate [configuration] - -Signed-off-by: Maxin B. John <maxin.john@intel.com> ---- - cachegrind/cg_annotate.in | 2 +- - cachegrind/cg_diff.in | 2 +- - massif/ms_print.in | 2 +- - perf/vg_perf.in | 2 +- - 4 files changed, 4 insertions(+), 4 deletions(-) - -diff --git a/cachegrind/cg_annotate.in b/cachegrind/cg_annotate.in -index 69365e8..978265d 100644 ---- a/cachegrind/cg_annotate.in -+++ b/cachegrind/cg_annotate.in -@@ -1,4 +1,4 @@ --#! @PERL@ -+#! /usr/bin/perl - - ##--------------------------------------------------------------------## - ##--- Cachegrind's annotator. cg_annotate.in ---## -diff --git a/cachegrind/cg_diff.in b/cachegrind/cg_diff.in -index 395460b..05873cc 100755 ---- a/cachegrind/cg_diff.in -+++ b/cachegrind/cg_diff.in -@@ -1,4 +1,4 @@ --#! @PERL@ -+#! /usr/bin/perl - - ##--------------------------------------------------------------------## - ##--- Cachegrind's differencer. cg_diff.in ---## -diff --git a/massif/ms_print.in b/massif/ms_print.in -index e6fae89..3b85b40 100755 ---- a/massif/ms_print.in -+++ b/massif/ms_print.in -@@ -1,4 +1,4 @@ --#! @PERL@ -+#! /usr/bin/perl - - ##--------------------------------------------------------------------## - ##--- Massif's results printer ms_print.in ---## -diff --git a/perf/vg_perf.in b/perf/vg_perf.in -index 7a80cb0..28f6156 100644 ---- a/perf/vg_perf.in -+++ b/perf/vg_perf.in -@@ -1,4 +1,4 @@ --#! @PERL@ -+#! /usr/bin/perl - ##--------------------------------------------------------------------## - ##--- Valgrind performance testing script vg_perf ---## - ##--------------------------------------------------------------------## -diff --git a/tests/vg_regtest.in b/tests/vg_regtest.in -index cb05b52..032e947 100755 ---- a/tests/vg_regtest.in -+++ b/tests/vg_regtest.in -@@ -1,4 +1,4 @@ --#! @PERL@ -+#! /usr/bin/perl - ##--------------------------------------------------------------------## - ##--- Valgrind regression testing script vg_regtest ---## - ##--------------------------------------------------------------------## ---- -2.4.0 diff --git a/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/run-ptest b/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/run-ptest deleted file mode 100755 index f9a72ec..0000000 --- a/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/run-ptest +++ /dev/null @@ -1,12 +0,0 @@ -#!/bin/sh - -# run-ptest - 'ptest' test infrastructure shell script that -# wraps the valgrind regression script vg_regtest. -# Must be run in the /usr/lib/valgrind/ptest directory. -# -# Dave Lerner <dave.lerner@windriver.com> -############################################################### -VALGRINDLIB=@libdir@/valgrind -tests/vg_regtest --all \ - --valgrind=/usr/bin/valgrind --valgrind-lib=$VALGRINDLIB \ - --yocto-ptest diff --git a/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/use-appropriate-march-mcpu-mfpu-for-ARM-test-apps.patch b/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/use-appropriate-march-mcpu-mfpu-for-ARM-test-apps.patch deleted file mode 100644 index adea405..0000000 --- a/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/use-appropriate-march-mcpu-mfpu-for-ARM-test-apps.patch +++ /dev/null @@ -1,44 +0,0 @@ -From d134dafc2f11e0d247420a0ba360bcdef77b4093 Mon Sep 17 00:00:00 2001 -From: Andre McCurdy <armccurdy@gmail.com> -Date: Tue, 19 Jan 2016 16:00:00 -0800 -Subject: [PATCH] use appropriate -march/-mcpu/-mfpu for ARM test apps - -Ensure that test apps in none/tests/arm are compiled with appropriate --march/-mcpu/-mfpu flags to support the instructions being tested. -The aim is to build all tests, even ones which may not run correctly -on all target CPUs. - -For tests requiring armv7ve instructions, ensure that we set both --march=armv7ve and -mcpu=cortex-a15 (since some TUNE_CCARGS may set --march=armv7-a and adding -mcpu=cortex-a15 alone is not enough to -over-ride that). - -See similar cases in none/tests/arm/Makefile.am - -Upstream-Status: Pending - -Signed-off-by: Andre McCurdy <armccurdy@gmail.com> ---- - none/tests/arm/Makefile.am | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - -diff --git a/none/tests/arm/Makefile.am b/none/tests/arm/Makefile.am -index 4507a20..825290f 100644 ---- a/none/tests/arm/Makefile.am -+++ b/none/tests/arm/Makefile.am -@@ -62,8 +62,10 @@ neon64_CFLAGS = $(AM_CFLAGS) -g -O0 -mcpu=cortex-a8 \ - -mfpu=neon \ - -mthumb - --intdiv_CFLAGS = $(AM_CFLAGS) -g -mcpu=cortex-a15 -mthumb -+intdiv_CFLAGS = $(AM_CFLAGS) -g -march=armv7ve -mcpu=cortex-a15 -mthumb - ldrt_CFLAGS = $(AM_CFLAGS) -g -mcpu=cortex-a8 -mthumb - ldrt_arm_CFLAGS = $(AM_CFLAGS) -g -mcpu=cortex-a8 -marm - --vfpv4_fma_CFLAGS = $(AM_CFLAGS) -g -O0 -mcpu=cortex-a15 -mfpu=vfpv4 -marm -+vcvt_fixed_float_VFP_CFLAGS = $(AM_CFLAGS) -g -mcpu=cortex-a8 -mfpu=vfpv3 -+ -+vfpv4_fma_CFLAGS = $(AM_CFLAGS) -g -O0 -march=armv7ve -mcpu=cortex-a15 -mfpu=vfpv4 -marm --- -1.9.1 - diff --git a/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/valgrind-make-ld-XXX.so-strlen-intercept-optional.patch b/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/valgrind-make-ld-XXX.so-strlen-intercept-optional.patch deleted file mode 100644 index d04297d..0000000 --- a/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind/valgrind-make-ld-XXX.so-strlen-intercept-optional.patch +++ /dev/null @@ -1,45 +0,0 @@ -From 005bd11809a1ce65e9f2c28e884354a4741650b9 Mon Sep 17 00:00:00 2001 -From: Andre McCurdy <armccurdy@gmail.com> -Date: Tue, 13 Dec 2016 11:29:55 +0800 -Subject: [PATCH] make ld-XXX.so strlen intercept optional - -Hack: Depending on how glibc was compiled (e.g. optimised for size or -built with _FORTIFY_SOURCE enabled) the strlen symbol might not be -found in ld-XXX.so. Therefore although we should still try to -intercept it, don't make it mandatory to do so. - -Upstream-Status: Inappropriate - -Signed-off-by: Andre McCurdy <armccurdy@gmail.com> -Signed-off-by: Jackie Huang <jackie.huang@windriver.com> ---- - coregrind/m_redir.c | 13 ++++++++++++- - 1 file changed, 12 insertions(+), 1 deletion(-) - -diff --git a/coregrind/m_redir.c b/coregrind/m_redir.c -index ff35009..d7d6816 100644 ---- a/coregrind/m_redir.c -+++ b/coregrind/m_redir.c -@@ -1275,7 +1275,18 @@ static void add_hardwired_spec (const HChar* sopatt, const HChar* fnpatt, - spec->to_addr = to_addr; - spec->isWrap = False; - spec->isGlobal = False; -- spec->mandatory = mandatory; -+ -+ /* Hack: Depending on how glibc was compiled (e.g. optimised for size or -+ built with _FORTIFY_SOURCE enabled) the strlen symbol might not be found. -+ Therefore although we should still try to intercept it, don't make it -+ mandatory to do so. We over-ride "mandatory" here to avoid the need to -+ patch the many different architecture specific callers to -+ add_hardwired_spec(). */ -+ if (0==VG_(strcmp)("strlen", fnpatt)) -+ spec->mandatory = NULL; -+ else -+ spec->mandatory = mandatory; -+ - /* VARIABLE PARTS */ - spec->mark = False; /* not significant */ - spec->done = False; /* not significant */ --- -1.9.1 - diff --git a/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind_3.12.0.bb b/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind_3.12.0.bb deleted file mode 100644 index 7a1c3c6..0000000 --- a/meta-rcar-gen3-adas/recipes-devtools/valgrind/valgrind_3.12.0.bb +++ /dev/null @@ -1,127 +0,0 @@ -SUMMARY = "Valgrind memory debugger and instrumentation framework" -HOMEPAGE = "http://valgrind.org/" -BUGTRACKER = "http://valgrind.org/support/bug_reports.html" -LICENSE = "GPLv2 & GPLv2+ & BSD" -LIC_FILES_CHKSUM = "file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ - file://include/pub_tool_basics.h;beginline=1;endline=29;md5=ebb8e640ef633f940c425686c873f9fa \ - file://include/valgrind.h;beginline=1;endline=56;md5=4b5e24908e53016ea561c45f4234a327 \ - file://COPYING.DOCS;md5=24ea4c7092233849b4394699333b5c56" - -X11DEPENDS = "virtual/libx11" -DEPENDS = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', '${X11DEPENDS}', '', d)} \ - ${@bb.utils.contains('DISTRO_FEATURES', 'ptest', 'boost', '', d)} \ - " - -SRC_URI = "http://www.valgrind.org/downloads/valgrind-${PV}.tar.bz2 \ - file://fixed-perl-path.patch \ - file://Added-support-for-PPC-instructions-mfatbu-mfatbl.patch \ - file://run-ptest \ - file://0002-remove-rpath.patch \ - file://0004-Fix-out-of-tree-builds.patch \ - file://0005-Modify-vg_test-wrapper-to-support-PTEST-formats.patch \ - file://0001-Remove-tests-that-fail-to-build-on-some-PPC32-config.patch \ - file://use-appropriate-march-mcpu-mfpu-for-ARM-test-apps.patch \ - file://avoid-neon-for-targets-which-don-t-support-it.patch \ - file://valgrind-make-ld-XXX.so-strlen-intercept-optional.patch \ -" -SRC_URI_append_libc-musl = "\ - file://0001-fix-build-for-musl-targets.patch \ -" -SRC_URI[md5sum] = "6eb03c0c10ea917013a7622e483d61bb" -SRC_URI[sha256sum] = "67ca4395b2527247780f36148b084f5743a68ab0c850cb43e4a5b4b012cf76a1" - -COMPATIBLE_HOST = '(i.86|x86_64|arm|aarch64|mips|powerpc|powerpc64).*-linux' - -# valgrind supports armv7 and above -COMPATIBLE_HOST_armv4 = 'null' -COMPATIBLE_HOST_armv5 = 'null' -COMPATIBLE_HOST_armv6 = 'null' - -# X32 isn't supported by valgrind at this time -COMPATIBLE_HOST_linux-gnux32 = 'null' - -# Disable for some MIPS variants -COMPATIBLE_HOST_mipsarcho32 = "${@bb.utils.contains("TARGET_FPU", "soft", "null", ".*-linux", d)}" -COMPATIBLE_HOST_mipsarchn32 = 'null' -COMPATIBLE_HOST_mipsarchn64 = "${@bb.utils.contains("TARGET_FPU", "soft", "null", ".*-linux", d)}" -COMPATIBLE_HOST_mipsarchr6 = 'null' - -inherit autotools ptest - -EXTRA_OECONF = "--enable-tls --without-mpicc" -EXTRA_OECONF += "${@['--enable-only32bit','--enable-only64bit'][${SITEINFO_BITS} != '32']}" - -# valgrind checks host_cpu "armv7*)", so we need to over-ride the autotools.bbclass default --host option -EXTRA_OECONF_append_arm = " --host=armv7${HOST_VENDOR}-${HOST_OS}" - -EXTRA_OEMAKE = "-w" - -# valgrind likes to control its own optimisation flags. It generally defaults -# to -O2 but uses -O0 for some specific test apps etc. Passing our own flags -# (via CFLAGS) means we interfere with that. Only pass DEBUG_FLAGS to it -# which fixes build path issue in DWARF. -SELECTED_OPTIMIZATION = "${DEBUG_FLAGS}" - -CFLAGS_append_libc-uclibc = " -D__UCLIBC__ " - -do_install_append () { - install -m 644 ${B}/default.supp ${D}/${libdir}/valgrind/ -} - -RDEPENDS_${PN} += "perl" - -# valgrind needs debug information for ld.so at runtime in order to -# redirect functions like strlen. -RRECOMMENDS_${PN} += "${TCLIBC}-dbg" - -RDEPENDS_${PN}-ptest += " sed perl perl-module-file-glob" -RDEPENDS_${PN}-ptest_append_libc-glibc = " glibc-utils" - -# One of the tests contains a bogus interpreter path on purpose. -# Skip file dependency check -SKIP_FILEDEPS_${PN}-ptest = '1' - -do_compile_ptest() { - oe_runmake check -} - -do_install_ptest() { - chmod +x ${B}/tests/vg_regtest - - # The test application binaries are not automatically installed. - # Grab them from the build directory. - # - # The regression tests require scripts and data files that are not - # copied to the build directory. They must be copied from the - # source directory. - saved_dir=$PWD - for parent_dir in ${S} ${B} ; do - cd $parent_dir - - # exclude shell or the package won't install - rm -rf none/tests/shell* 2>/dev/null - - subdirs="tests cachegrind/tests callgrind/tests drd/tests helgrind/tests massif/tests memcheck/tests none/tests" - - # Get the vg test scripts, filters, and expected files - for dir in $subdirs ; do - find $dir | cpio -pvdu ${D}${PTEST_PATH} - done - cd $saved_dir - done - - # clean out build artifacts before building the rpm - find ${D}${PTEST_PATH} \ - \( -name "Makefile*" \ - -o -name "*.o" \ - -o -name "*.c" \ - -o -name "*.S" \ - -o -name "*.h" \) \ - -exec rm {} \; - - # needed by massif tests - cp ${B}/massif/ms_print ${D}${PTEST_PATH}/massif/ms_print - - # handle multilib - sed -i s:@libdir@:${libdir}:g ${D}${PTEST_PATH}/run-ptest -} diff --git a/meta-rcar-gen3-adas/recipes-graphics/cairo/cairo_1.14.6.bbappend b/meta-rcar-gen3-adas/recipes-graphics/cairo/cairo_1.14.6.bbappend deleted file mode 100644 index fa555a8..0000000 --- a/meta-rcar-gen3-adas/recipes-graphics/cairo/cairo_1.14.6.bbappend +++ /dev/null @@ -1,4 +0,0 @@ -require include/gles-control.inc - -PACKAGECONFIG_pn-cairo_append = "${@' egl glesv2' if '${USE_GLES_WAYLAND}' == '1' else ''}" -PACKAGECONFIG_pn-cairo_append += "${@bb.utils.contains('DISTRO_FEATURES', 'directfb', 'directfb', '', d)}" diff --git a/meta-rcar-gen3-adas/recipes-graphics/libpng/libpng_%.bbappend b/meta-rcar-gen3-adas/recipes-graphics/libpng/libpng_%.bbappend deleted file mode 100644 index 252fec3..0000000 --- a/meta-rcar-gen3-adas/recipes-graphics/libpng/libpng_%.bbappend +++ /dev/null @@ -1,2 +0,0 @@ -# ...use neon acceleration -EXTRA_OECONF_append_aarch64 = " --enable-arm-neon=on" diff --git a/meta-rcar-gen3-adas/recipes-graphics/opencv/opencv-samples_2.4.bb b/meta-rcar-gen3-adas/recipes-graphics/opencv/opencv-samples_2.4.bb deleted file mode 100644 index 9d862fe..0000000 --- a/meta-rcar-gen3-adas/recipes-graphics/opencv/opencv-samples_2.4.bb +++ /dev/null @@ -1,39 +0,0 @@ -SUMMARY = "Opencv : The Open Computer Vision Library" -HOMEPAGE = "http://opencv.willowgarage.com/wiki/" -SECTION = "libs" -LICENSE = "BSD" - -DEPENDS = "opencv" - -LIC_FILES_CHKSUM = "file://include/opencv2/opencv.hpp;endline=41;md5=6d690d8488a6fca7a2c192932466bb14 \ -" -SRCREV = "6fae07ba8867b8fd2c53344a774aab669afa7c5e" -SRC_URI = "git://github.com/Itseez/opencv.git;branch=2.4 \ - " -PV = "2.4.3+git${SRCPV}" - -S = "${WORKDIR}/git" - -do_install() { - cd samples/c - install -d ${D}/${bindir} - install -d ${D}/${datadir}/opencv/samples - - cp * ${D}/${datadir}/opencv/samples || true - - for i in *.c; do - echo "compiling $i" - ${CXX} ${CFLAGS} ${LDFLAGS} -ggdb `pkg-config --cflags opencv` -o `basename $i .c` $i `pkg-config --libs opencv` || true - install -m 0755 `basename $i .c` ${D}/${bindir} || true - rm ${D}/${datadir}/opencv/samples/`basename $i .c` || true - done - for i in *.cpp; do - echo "compiling $i" - ${CXX} ${CFLAGS} ${LDFLAGS} -ggdb `pkg-config --cflags opencv` -o `basename $i .cpp` $i `pkg-config --libs opencv` || true - install -m 0755 `basename $i .cpp` ${D}/${bindir} || true - rm ${D}/${datadir}/opencv/samples/`basename $i .cpp` || true - done -} - -FILES_${PN}-dev += "${datadir}/opencv/samples/*.c* ${datadir}/opencv/samples/*.vcp* ${datadir}/opencv/samples/build*" -FILES_${PN} += "${bindir} ${datadir}/opencv" diff --git a/meta-rcar-gen3-adas/recipes-graphics/opencv/opencv/0001-3rdparty-ippicv-Use-pre-downloaded-ipp.patch b/meta-rcar-gen3-adas/recipes-graphics/opencv/opencv/0001-3rdparty-ippicv-Use-pre-downloaded-ipp.patch deleted file mode 100644 index 1077d05..0000000 --- a/meta-rcar-gen3-adas/recipes-graphics/opencv/opencv/0001-3rdparty-ippicv-Use-pre-downloaded-ipp.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 049f931207631aa54af55a2917318d032b2ef3fa Mon Sep 17 00:00:00 2001 -From: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> -Date: Thu, 31 Mar 2016 00:20:15 +0200 -Subject: [PATCH] 3rdparty/ippicv: Use pre-downloaded ipp - -Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> ---- - 3rdparty/ippicv/downloader.cmake | 2 ++ - 1 file changed, 2 insertions(+) - -diff --git a/3rdparty/ippicv/downloader.cmake b/3rdparty/ippicv/downloader.cmake -index a6016dbe10bc..af4062c8e95e 100644 ---- a/3rdparty/ippicv/downloader.cmake -+++ b/3rdparty/ippicv/downloader.cmake -@@ -31,8 +31,10 @@ function(_icv_downloader) - return() # Not supported - endif() - -+ if(NOT DEFINED OPENCV_ICV_PATH) - set(OPENCV_ICV_UNPACK_PATH "${CMAKE_BINARY_DIR}/3rdparty/ippicv") - set(OPENCV_ICV_PATH "${OPENCV_ICV_UNPACK_PATH}${OPENCV_ICV_PACKAGE_SUBDIR}") -+ endif() - - if(DEFINED OPENCV_ICV_PACKAGE_DOWNLOADED - AND OPENCV_ICV_PACKAGE_DOWNLOADED STREQUAL OPENCV_ICV_PACKAGE_HASH --- -2.8.0.rc3 - diff --git a/meta-rcar-gen3-adas/recipes-graphics/opencv/opencv/0001-Revert-cuda-fix-fp16-compilation.patch b/meta-rcar-gen3-adas/recipes-graphics/opencv/opencv/0001-Revert-cuda-fix-fp16-compilation.patch deleted file mode 100644 index 507d796..0000000 --- a/meta-rcar-gen3-adas/recipes-graphics/opencv/opencv/0001-Revert-cuda-fix-fp16-compilation.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 69f9707678190f6a0948a547dce948251f972676 Mon Sep 17 00:00:00 2001 -From: Randy MacLeod <Randy.MacLeod@windriver.com> -Date: Wed, 26 Apr 2017 14:57:30 -0400 -Subject: [PATCH 1/2] Revert "cuda: fix fp16 compilation" - -This reverts commit 12e00827be40576b686ea4438a6e6ef85208743d. ---- - modules/core/include/opencv2/core/cvdef.h | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - -diff --git a/modules/core/include/opencv2/core/cvdef.h b/modules/core/include/opencv2/core/cvdef.h -index 699b166..efc24ca 100644 ---- a/modules/core/include/opencv2/core/cvdef.h -+++ b/modules/core/include/opencv2/core/cvdef.h -@@ -303,8 +303,7 @@ enum CpuFeatures { - #define CV_2PI 6.283185307179586476925286766559 - #define CV_LOG2 0.69314718055994530941723212145818 - --#if defined __ARM_FP16_FORMAT_IEEE \ -- && !defined __CUDACC__ -+#if defined (__ARM_FP16_FORMAT_IEEE) - # define CV_FP16_TYPE 1 - #else - # define CV_FP16_TYPE 0 --- -2.9.3 - diff --git a/meta-rcar-gen3-adas/recipes-graphics/opencv/opencv/fixpkgconfig.patch b/meta-rcar-gen3-adas/recipes-graphics/opencv/opencv/fixpkgconfig.patch deleted file mode 100644 index 3aeda7d..0000000 --- a/meta-rcar-gen3-adas/recipes-graphics/opencv/opencv/fixpkgconfig.patch +++ /dev/null @@ -1,29 +0,0 @@ -diff --git a/cmake/OpenCVGenPkgconfig.cmake b/cmake/OpenCVGenPkgconfig.cmake -index b8cb8777c06b..75281ee964fd 100644 ---- a/cmake/OpenCVGenPkgconfig.cmake -+++ b/cmake/OpenCVGenPkgconfig.cmake -@@ -27,7 +27,7 @@ macro(fix_prefix lst isown) - get_filename_component(libdir "${item}" PATH) - get_filename_component(libname "${item}" NAME_WE) - string(REGEX REPLACE "^lib(.*)" "\\1" libname "${libname}") -- list(APPEND _lst "-L${libdir}" "-l${libname}") -+ list(APPEND _lst "-l${libname}") - else() - list(APPEND _lst "-l${item}") - endif() -@@ -66,10 +66,14 @@ ocv_list_unique(_3rdparty) - - set(OPENCV_PC_LIBS - "-L\${exec_prefix}/${OPENCV_LIB_INSTALL_PATH}" -+ "-L\${exec_prefix}/${OPENCV_3P_LIB_INSTALL_PATH}" - "${_modules}" - ) - if (BUILD_SHARED_LIBS) -- set(OPENCV_PC_LIBS_PRIVATE "${_extra}") -+ set(OPENCV_PC_LIBS_PRIVATE -+ "-L\${exec_prefix}/${OPENCV_LIB_INSTALL_PATH}" -+ "${_extra}" -+ ) - else() - set(OPENCV_PC_LIBS_PRIVATE - "-L\${exec_prefix}/${OPENCV_3P_LIB_INSTALL_PATH}" diff --git a/meta-rcar-gen3-adas/recipes-graphics/opencv/opencv/opencv-fix-pkgconfig-generation.patch b/meta-rcar-gen3-adas/recipes-graphics/opencv/opencv/opencv-fix-pkgconfig-generation.patch deleted file mode 100644 index d352778..0000000 --- a/meta-rcar-gen3-adas/recipes-graphics/opencv/opencv/opencv-fix-pkgconfig-generation.patch +++ /dev/null @@ -1,44 +0,0 @@ -Fix pkg-config generation - -Replace absolute library path with library name spec and library search -path option. - -The fix has been provided by Ray Rashif (code.opencv.org/issues/1925) - -Upstream-Status: Pending - -diff -Nbaur OpenCV-2.4.3.orig/cmake/OpenCVGenPkgconfig.cmake OpenCV-2.4.3/cmake/OpenCVGenPkgconfig.cmake ---- OpenCV-2.4.3.orig/cmake/OpenCVGenPkgconfig.cmake 2012-11-04 08:40:14.243505926 +0000 -+++ OpenCV-2.4.3/cmake/OpenCVGenPkgconfig.cmake 2012-11-04 08:40:42.286649120 +0000 -@@ -10,7 +10,7 @@ - # ------------------------------------------------------------------------------------------- - set(prefix "${CMAKE_INSTALL_PREFIX}") - set(exec_prefix "\${prefix}") --set(libdir "") #TODO: need link paths for OpenCV_EXTRA_COMPONENTS -+set(libdir "\${prefix}/${OPENCV_LIB_INSTALL_PATH}") - set(includedir "\${prefix}/${OPENCV_INCLUDE_INSTALL_PATH}") - set(VERSION ${OPENCV_VERSION}) - -@@ -36,10 +36,11 @@ - ocv_list_reverse(OpenCV_EXTRA_COMPONENTS) - - #build the list of components --set(OpenCV_LIB_COMPONENTS_ "") -+set(OpenCV_LIB_COMPONENTS_ "-L\${libdir}") - foreach(CVLib ${OpenCV_LIB_COMPONENTS}) - get_target_property(libpath ${CVLib} LOCATION_${CMAKE_BUILD_TYPE}) - get_filename_component(libname "${libpath}" NAME) -+ get_filename_component(lname "${libpath}" NAME_WE) - - if(INSTALL_TO_MANGLED_PATHS) - set(libname "${libname}.${OPENCV_VERSION}") -@@ -52,7 +53,8 @@ - set(installDir "${OPENCV_LIB_INSTALL_PATH}") - endif() - -- set(OpenCV_LIB_COMPONENTS_ "${OpenCV_LIB_COMPONENTS_} \${exec_prefix}/${installDir}/${libname}") -+ string(REPLACE "libopencv" "-lopencv" lname "${lname}") -+ set(OpenCV_LIB_COMPONENTS_ "${OpenCV_LIB_COMPONENTS_} ${lname}") - endforeach() - - # add extra dependencies required for OpenCV diff --git a/meta-rcar-gen3-adas/recipes-graphics/opencv/opencv/uselocalxfeatures.patch b/meta-rcar-gen3-adas/recipes-graphics/opencv/opencv/uselocalxfeatures.patch deleted file mode 100644 index a2db48d..0000000 --- a/meta-rcar-gen3-adas/recipes-graphics/opencv/opencv/uselocalxfeatures.patch +++ /dev/null @@ -1,12 +0,0 @@ -diff --git a/modules/xfeatures2d/CMakeLists.txt b/modules/xfeatures2d/CMakeLists.txt -index f295bddaed66..6086e75ec37b 100644 ---- a/modules/xfeatures2d/CMakeLists.txt -+++ b/modules/xfeatures2d/CMakeLists.txt -@@ -1,5 +1,5 @@ - set(the_description "Contributed/Experimental Algorithms for Salient 2D Features Detection") - ocv_define_module(xfeatures2d opencv_core opencv_imgproc opencv_features2d opencv_calib3d opencv_shape opencv_highgui opencv_videoio opencv_ml - OPTIONAL opencv_cudaarithm WRAP python java) --include(cmake/download_vgg.cmake) --include(cmake/download_boostdesc.cmake) -+#include(cmake/download_vgg.cmake) -+#include(cmake/download_boostdesc.cmake) diff --git a/meta-rcar-gen3-adas/recipes-graphics/opencv/opencv/useoeprotobuf.patch b/meta-rcar-gen3-adas/recipes-graphics/opencv/opencv/useoeprotobuf.patch deleted file mode 100644 index 3068bd4..0000000 --- a/meta-rcar-gen3-adas/recipes-graphics/opencv/opencv/useoeprotobuf.patch +++ /dev/null @@ -1,13 +0,0 @@ -diff --git a/modules/dnn/cmake/OpenCVFindLibProtobuf.cmake b/modules/dnn/cmake/OpenCVFindLibProtobuf.cmake -index eb2a729cc2eb..8717736484de 100644 ---- a/modules/dnn/cmake/OpenCVFindLibProtobuf.cmake -+++ b/modules/dnn/cmake/OpenCVFindLibProtobuf.cmake -@@ -24,7 +24,7 @@ if(NOT BUILD_PROTOBUF AND NOT (DEFINED PROTOBUF_INCLUDE_DIR AND DEFINED PROTOBUF - find_package(Protobuf QUIET) - endif() - --if(PROTOBUF_FOUND) -+if(PROTOBUF_FOUND OR (DEFINED PROTOBUF_INCLUDE_DIR AND DEFINED PROTOBUF_LIBRARIES)) - # nothing - else() - include(${CMAKE_CURRENT_LIST_DIR}/download_protobuf.cmake) diff --git a/meta-rcar-gen3-adas/recipes-graphics/opencv/opencv_2.4.bb b/meta-rcar-gen3-adas/recipes-graphics/opencv/opencv_2.4.bb deleted file mode 100644 index f4239f7..0000000 --- a/meta-rcar-gen3-adas/recipes-graphics/opencv/opencv_2.4.bb +++ /dev/null @@ -1,96 +0,0 @@ -SUMMARY = "Opencv : The Open Computer Vision Library" -HOMEPAGE = "http://opencv.willowgarage.com/wiki/" -SECTION = "libs" - -LICENSE = "BSD" -LIC_FILES_CHKSUM = "file://include/opencv2/opencv.hpp;endline=41;md5=6d690d8488a6fca7a2c192932466bb14" - -ARM_INSTRUCTION_SET = "arm" - -DEPENDS = "python-numpy libtool swig swig-native python bzip2 zlib glib-2.0" - -SRC_URI = "git://github.com/Itseez/opencv.git;branch=2.4 " -SRCREV = "707d10f11526afee1e1a35ec7fdaa8b05f7e1656" -PV = "2.4.11+git${SRCPV}" - -S = "${WORKDIR}/git" - -# Do an out-of-tree build -#OECMAKE_SOURCEPATH = "${S}" -#OECMAKE_BUILDPATH = "${WORKDIR}/build-${TARGET_ARCH}" - -EXTRA_OECMAKE = "-DPYTHON_NUMPY_INCLUDE_DIR:PATH=${STAGING_LIBDIR}/${PYTHON_DIR}/site-packages/numpy/core/include \ - -DBUILD_PYTHON_SUPPORT=ON \ - -DWITH_GSTREAMER=OFF \ - -DCMAKE_SKIP_RPATH=ON \ - -DBUILD_EXAMPLES=ON \ - ${@bb.utils.contains("TARGET_CC_ARCH", "-msse3", "-DENABLE_SSE=1 -DENABLE_SSE2=1 -DENABLE_SSE3=1 -DENABLE_SSSE3=1", "", d)} \ - ${@base_conditional("libdir", "/usr/lib64", "-DLIB_SUFFIX=64 -DPYTHON_PACKAGES_PATH:PATH=lib64/python2.7/site-packages", "", d)} \ - ${@base_conditional("libdir", "/usr/lib32", "-DLIB_SUFFIX=32 -DPYTHON_PACKAGES_PATH:PATH=lib32/python2.7/site-packages", "", d)} \ -" - -PACKAGECONFIG ??= "eigen jpeg png tiff v4l libv4l gstreamer opengl neon ${@bb.utils.contains( 'DISTRO_FEATURES', 'qt5', 'qt5','', d)}" -PACKAGECONFIG[eigen] = "-DWITH_EIGEN=ON,-DWITH_EIGEN=OFF,libeigen," -PACKAGECONFIG[gtk] = "-DWITH_GTK=ON,-DWITH_GTK=OFF,gtk+," -PACKAGECONFIG[jpeg] = "-DWITH_JPEG=ON,-DWITH_JPEG=OFF,jpeg," -PACKAGECONFIG[libav] = "-DWITH_FFMPEG=ON,-DWITH_FFMPEG=OFF,libav," -PACKAGECONFIG[png] = "-DWITH_PNG=ON,-DWITH_PNG=OFF,libpng," -PACKAGECONFIG[tiff] = "-DWITH_TIFF=ON,-DWITH_TIFF=OFF,tiff," -PACKAGECONFIG[libv4l] = "-DWITH_LIBV4L=ON,-DWITH_LIBV4L=OFF,v4l-utils," -PACKAGECONFIG[v4l] = "-DWITH_V4L=ON,-DWITH_V4L=OFF,v4l-utils," -PACKAGECONFIG[jasper] = "-DBUILD_JASPER=ON,-DBUILD_JASPER=OFF," -PACKAGECONFIG[neon] = "-DENABLE_NEON=ON,-DENABLE_NEON=OFF,," -PACKAGECONFIG[gstreamer] = "-DWITH_GSTREAMER=ON,-DWITH_GSTREAMER=OFF,gstreamer1.0 gstreamer1.0-plugins-base gstreamer1.0-plugins-good," -PACKAGECONFIG[opengl] = "-DWITH_OPENGL=ON,-DWITH_OPENGL=OFF,," -PACKAGECONFIG[qt5] = "-DWITH_QT=ON,-DWITH_QT=OFF,qtbase," - -inherit distutils-base pkgconfig cmake ${@bb.utils.contains( 'DISTRO_FEATURES', 'qt5', 'cmake_qt5','', d)} - -export BUILD_SYS -export HOST_SYS -export PYTHON_CSPEC="-I${STAGING_INCDIR}/${PYTHON_DIR}" -export PYTHON="${STAGING_BINDIR_NATIVE}/python" - -TARGET_CC_ARCH += "-I${S}/include " - -PACKAGES += "${PN}-apps python-opencv" - -python populate_packages_prepend () { - cv_libdir = d.expand('${libdir}') - cv_libdir_dbg = d.expand('${libdir}/.debug') - do_split_packages(d, cv_libdir, '^lib(.*)\.so$', 'lib%s-dev', 'OpenCV %s development package', extra_depends='${PN}-dev', allow_links=True) - do_split_packages(d, cv_libdir, '^lib(.*)\.la$', 'lib%s-dev', 'OpenCV %s development package', extra_depends='${PN}-dev') - do_split_packages(d, cv_libdir, '^lib(.*)\.a$', 'lib%s-dev', 'OpenCV %s development package', extra_depends='${PN}-dev') - do_split_packages(d, cv_libdir, '^lib(.*)\.so\.*', 'lib%s', 'OpenCV %s library', extra_depends='', allow_links=True) - - pn = d.getVar('PN', 1) - metapkg = pn + '-dev' - d.setVar('ALLOW_EMPTY_' + metapkg, "1") - blacklist = [ metapkg ] - metapkg_rdepends = [ ] - packages = d.getVar('PACKAGES', 1).split() - for pkg in packages[1:]: - if not pkg in blacklist and not pkg in metapkg_rdepends and pkg.endswith('-dev'): - metapkg_rdepends.append(pkg) - d.setVar('RRECOMMENDS_' + metapkg, ' '.join(metapkg_rdepends)) -} - -PACKAGES_DYNAMIC += "^libopencv-.*" - -FILES_${PN} = "" -FILES_${PN}-apps = "${bindir}/* ${datadir}/OpenCV" -FILES_${PN}-dbg += "${libdir}/.debug" -FILES_${PN}-dev = "${includedir} ${libdir}/pkgconfig" -FILES_${PN}-doc = "${datadir}/OpenCV/doc" - -ALLOW_EMPTY_${PN} = "1" - -INSANE_SKIP_python-opencv = "True" -SUMMARY_python-opencv = "Python bindings to opencv" -FILES_python-opencv = "${PYTHON_SITEPACKAGES_DIR}/*" -RDEPENDS_python-opencv = "python-core python-numpy" - -do_install_append() { - cp ${S}/include/opencv/*.h ${D}${includedir}/opencv/ - sed -i '/blobtrack/d' ${D}${includedir}/opencv/cvaux.h -} diff --git a/meta-rcar-gen3-adas/recipes-graphics/opencv/opencv_3.2.bb b/meta-rcar-gen3-adas/recipes-graphics/opencv/opencv_3.2.bb deleted file mode 100644 index a5ef014..0000000 --- a/meta-rcar-gen3-adas/recipes-graphics/opencv/opencv_3.2.bb +++ /dev/null @@ -1,176 +0,0 @@ -SUMMARY = "Opencv : The Open Computer Vision Library" -HOMEPAGE = "http://opencv.org/" -SECTION = "libs" - -LICENSE = "BSD-3-Clause" -LIC_FILES_CHKSUM = "file://LICENSE;md5=2b2f8752cc5edf504d283107d033f544" - -ARM_INSTRUCTION_SET_armv4 = "arm" -ARM_INSTRUCTION_SET_armv5 = "arm" - -DEPENDS = "libtool swig-native bzip2 zlib glib-2.0" - -#DEPENDS = "libwebp" - -SRCREV_opencv = "70bbf17b133496bd7d54d034b0f94bd869e0e810" -SRCREV_contrib = "86342522b0eb2b16fa851c020cc4e0fef4e010b7" -SRCREV_ipp = "81a676001ca8075ada498583e4166079e5744668" -SRCREV_bootdesc = "34e4206aef44d50e6bbcd0ab06354b52e7466d26" -SRCREV_vgg = "fccf7cd6a4b12079f73bbfb21745f9babcd4eb1d" -IPP_MD5 = "808b791a6eac9ed78d32a7666804320e" - -SRCREV_FORMAT = "opencv" -SRC_URI = "git://github.com/opencv/opencv.git;name=opencv \ - git://github.com/opencv/opencv_contrib.git;destsuffix=contrib;name=contrib \ - git://github.com/opencv/opencv_3rdparty.git;branch=ippicv/master_20151201;destsuffix=ipp;name=ipp \ - git://github.com/opencv/opencv_3rdparty.git;branch=contrib_xfeatures2d_boostdesc_20161012;destsuffix=bootdesc;name=bootdesc \ - git://github.com/opencv/opencv_3rdparty.git;branch=contrib_xfeatures2d_vgg_20160317;destsuffix=vgg;name=vgg \ - file://0001-3rdparty-ippicv-Use-pre-downloaded-ipp.patch \ - file://fixpkgconfig.patch \ - file://uselocalxfeatures.patch;patchdir=../contrib/ \ - file://useoeprotobuf.patch;patchdir=../contrib/ \ - file://0001-Revert-cuda-fix-fp16-compilation.patch \ -" -# file://0002-Revert-check-FP16-build-condition-correctly.patch \ -# - -PV = "3.2+git${SRCPV}" - -S = "${WORKDIR}/git" - -do_unpack_extra() { - tar xzf ${WORKDIR}/ipp/ippicv/ippicv_linux_20151201.tgz -C ${WORKDIR} - cp ${WORKDIR}/vgg/*.i ${WORKDIR}/contrib/modules/xfeatures2d/src - cp ${WORKDIR}/bootdesc/*.i ${WORKDIR}/contrib/modules/xfeatures2d/src -} -addtask unpack_extra after do_unpack before do_patch - -EXTRA_OECMAKE = "-DOPENCV_EXTRA_MODULES_PATH=${WORKDIR}/contrib/modules \ - -DWITH_1394=OFF \ - -DCMAKE_SKIP_RPATH=ON \ - -DOPENCV_ICV_PACKAGE_DOWNLOADED=${IPP_MD5} \ - -DOPENCV_ICV_PATH=${WORKDIR}/ippicv_lnx \ - ${@bb.utils.contains("TARGET_CC_ARCH", "-msse3", "-DENABLE_SSE=1 -DENABLE_SSE2=1 -DENABLE_SSE3=1 -DENABLE_SSSE3=1", "", d)} \ - ${@bb.utils.contains("TARGET_CC_ARCH", "-msse4.1", "-DENABLE_SSE=1 -DENABLE_SSE2=1 -DENABLE_SSE3=1 -DENABLE_SSSE3=1 -DENABLE_SSE41=1", "", d)} \ - ${@bb.utils.contains("TARGET_CC_ARCH", "-msse4.2", "-DENABLE_SSE=1 -DENABLE_SSE2=1 -DENABLE_SSE3=1 -DENABLE_SSSE3=1 -DENABLE_SSE41=1 -DENABLE_SSE42=1", "", d)} \ - ${@base_conditional("libdir", "/usr/lib64", "-DLIB_SUFFIX=64", "", d)} \ - ${@base_conditional("libdir", "/usr/lib32", "-DLIB_SUFFIX=32", "", d)} \ -" -EXTRA_OECMAKE_append_x86 = " -DX86=ON" - -PACKAGECONFIG ??= "eigen jpeg png tiff v4l libv4l gstreamer samples tbb \ - ${@bb.utils.contains("DISTRO_FEATURES", "x11", "gtk", "", d)} \ - ${@bb.utils.contains("LICENSE_FLAGS_WHITELIST", "commercial", "libav", "", d)} \ - ${@bb.utils.contains("DISTRO_FEATURES", "qt5", "qt5", "", d)}" - -PACKAGECONFIG[amdblas] = "-DWITH_OPENCLAMDBLAS=ON,-DWITH_OPENCLAMDBLAS=OFF,libclamdblas," -PACKAGECONFIG[amdfft] = "-DWITH_OPENCLAMDFFT=ON,-DWITH_OPENCLAMDFFT=OFF,libclamdfft," -PACKAGECONFIG[dnn] = "-DBUILD_opencv_dnn=ON -DUPDATE_PROTO_FILES=ON -DBUILD_PROTOBUF=OFF,-DBUILD_opencv_dnn=OFF,lapack protobuf protobuf-native," -PACKAGECONFIG[eigen] = "-DWITH_EIGEN=ON,-DWITH_EIGEN=OFF,libeigen gflags glog," -PACKAGECONFIG[freetype] = "-DBUILD_opencv_freetype=ON,-DBUILD_opencv_freetype=OFF,freetype," -PACKAGECONFIG[gphoto2] = "-DWITH_GPHOTO2=ON,-DWITH_GPHOTO2=OFF,libgphoto2," -PACKAGECONFIG[gstreamer] = "-DWITH_GSTREAMER=ON,-DWITH_GSTREAMER=OFF,gstreamer1.0 gstreamer1.0-plugins-base," -PACKAGECONFIG[gtk] = "-DWITH_GTK=ON,-DWITH_GTK=OFF,gtk+3," -PACKAGECONFIG[jasper] = "-DWITH_JASPER=ON,-DWITH_JASPER=OFF,jasper," -PACKAGECONFIG[java] = "-DJAVA_INCLUDE_PATH=${JAVA_HOME}/include -DJAVA_INCLUDE_PATH2=${JAVA_HOME}/include/linux -DJAVA_AWT_INCLUDE_PATH=${JAVA_HOME}/include -DJAVA_AWT_LIBRARY=${JAVA_HOME}/lib/amd64/libjawt.so -DJAVA_JVM_LIBRARY=${JAVA_HOME}/lib/amd64/server/libjvm.so,,ant-native fastjar-native openjdk-8-native," -PACKAGECONFIG[jpeg] = "-DWITH_JPEG=ON,-DWITH_JPEG=OFF,jpeg," -PACKAGECONFIG[libav] = "-DWITH_FFMPEG=ON,-DWITH_FFMPEG=OFF,libav," -PACKAGECONFIG[libv4l] = "-DWITH_LIBV4L=ON,-DWITH_LIBV4L=OFF,v4l-utils," -PACKAGECONFIG[opencl] = "-DWITH_OPENCL=ON,-DWITH_OPENCL=OFF,opencl-headers virtual/opencl-icd," -PACKAGECONFIG[oracle-java] = "-DJAVA_INCLUDE_PATH=${ORACLE_JAVA_HOME}/include -DJAVA_INCLUDE_PATH2=${ORACLE_JAVA_HOME}/include/linux -DJAVA_AWT_INCLUDE_PATH=${ORACLE_JAVA_HOME}/include -DJAVA_AWT_LIBRARY=${ORACLE_JAVA_HOME}/lib/amd64/libjawt.so -DJAVA_JVM_LIBRARY=${ORACLE_JAVA_HOME}/lib/amd64/server/libjvm.so,,ant-native oracle-jse-jdk oracle-jse-jdk-native," -PACKAGECONFIG[png] = "-DWITH_PNG=ON,-DWITH_PNG=OFF,libpng," -PACKAGECONFIG[python2] = "-DPYTHON2_NUMPY_INCLUDE_DIRS:PATH=${STAGING_LIBDIR}/${PYTHON_DIR}/site-packages/numpy/core/include,,python-numpy," -PACKAGECONFIG[python3] = "-DPYTHON3_NUMPY_INCLUDE_DIRS:PATH=${STAGING_LIBDIR}/${PYTHON_DIR}/site-packages/numpy/core/include,,python3-numpy," -PACKAGECONFIG[samples] = "-DBUILD_EXAMPLES=ON -DINSTALL_PYTHON_EXAMPLES=ON,-DBUILD_EXAMPLES=OFF,," -PACKAGECONFIG[tbb] = "-DWITH_TBB=ON,-DWITH_TBB=OFF,tbb," -PACKAGECONFIG[text] = "-DBUILD_opencv_text=ON,-DBUILD_opencv_text=OFF,tesseract," -PACKAGECONFIG[tiff] = "-DWITH_TIFF=ON,-DWITH_TIFF=OFF,tiff," -PACKAGECONFIG[v4l] = "-DWITH_V4L=ON,-DWITH_V4L=OFF,v4l-utils," -PACKAGECONFIG[qt5] = "-DWITH_QT=ON,-DWITH_QT=OFF,qtbase," - -inherit pkgconfig cmake ${@bb.utils.contains( 'DISTRO_FEATURES', 'qt5', 'cmake_qt5','', d)} - -inherit ${@bb.utils.contains('PACKAGECONFIG', 'python3', 'distutils3-base', '', d)} -inherit ${@bb.utils.contains('PACKAGECONFIG', 'python2', 'distutils-base', '', d)} - -export PYTHON_CSPEC="-I${STAGING_INCDIR}/${PYTHON_DIR}" -export PYTHON="${STAGING_BINDIR_NATIVE}/${@bb.utils.contains('PACKAGECONFIG', 'python3', 'python3', 'python', d)}" -export ORACLE_JAVA_HOME="${STAGING_DIR_NATIVE}/usr/bin/java" -export JAVA_HOME="${STAGING_DIR_NATIVE}/usr/lib/jvm/openjdk-8-native" -export ANT_DIR="${STAGING_DIR_NATIVE}/usr/share/ant/" - -TARGET_CC_ARCH += "-I${S}/include " - -PACKAGES += "${@bb.utils.contains('PACKAGECONFIG', 'samples', '${PN}-samples', '', d)} \ - ${@bb.utils.contains('PACKAGECONFIG', 'oracle-java', '${PN}-java', '', d)} \ - ${@bb.utils.contains('PACKAGECONFIG', 'java', '${PN}-java', '', d)} \ - ${@bb.utils.contains('PACKAGECONFIG', 'python2', 'python-${BPN}', '', d)} \ - ${@bb.utils.contains('PACKAGECONFIG', 'python3', 'python3-${BPN}', '', d)} \ - ${PN}-apps" - -python populate_packages_prepend () { - cv_libdir = d.expand('${libdir}') - do_split_packages(d, cv_libdir, '^lib(.*)\.so$', 'lib%s-dev', 'OpenCV %s development package', extra_depends='${PN}-dev', allow_links=True) - do_split_packages(d, cv_libdir, '^lib(.*)\.la$', 'lib%s-dev', 'OpenCV %s development package', extra_depends='${PN}-dev') - do_split_packages(d, cv_libdir, '^lib(.*)\.a$', 'lib%s-dev', 'OpenCV %s development package', extra_depends='${PN}-dev') - do_split_packages(d, cv_libdir, '^lib(.*)\.so\.*', 'lib%s', 'OpenCV %s library', extra_depends='', allow_links=True) - - pn = d.getVar('PN', 1) - metapkg = pn + '-dev' - d.setVar('ALLOW_EMPTY_' + metapkg, "1") - blacklist = [ metapkg ] - metapkg_rdepends = [ ] - packages = d.getVar('PACKAGES', 1).split() - for pkg in packages[1:]: - if not pkg in blacklist and not pkg in metapkg_rdepends and pkg.endswith('-dev'): - metapkg_rdepends.append(pkg) - d.setVar('RRECOMMENDS_' + metapkg, ' '.join(metapkg_rdepends)) - - metapkg = pn - blacklist = [ metapkg ] - metapkg_rdepends = [ ] - for pkg in packages[1:]: - if not pkg in blacklist and not pkg in metapkg_rdepends and not pkg.endswith('-dev') and not pkg.endswith('-dbg') and not pkg.endswith('-doc') and not pkg.endswith('-locale') and not pkg.endswith('-staticdev'): - metapkg_rdepends.append(pkg) - d.setVar('RDEPENDS_' + metapkg, ' '.join(metapkg_rdepends)) - -} - -PACKAGES_DYNAMIC += "^libopencv-.*" - -FILES_${PN} = "" -FILES_${PN}-dbg += "${datadir}/OpenCV/java/.debug/* ${datadir}/OpenCV/samples/bin/.debug/*" -FILES_${PN}-dev = "${includedir} ${libdir}/pkgconfig ${datadir}/OpenCV/*.cmake" -FILES_${PN}-staticdev += "${datadir}/OpenCV/3rdparty/lib/*.a" -FILES_${PN}-apps = "${bindir}/* ${datadir}/OpenCV" -FILES_${PN}-java = "${datadir}/OpenCV/java" -FILES_${PN}-samples = "${datadir}/OpenCV/samples/" - -INSANE_SKIP_${PN}-java = "libdir" -INSANE_SKIP_${PN}-dbg = "libdir" - -ALLOW_EMPTY_${PN} = "1" - -SUMMARY_python-opencv = "Python bindings to opencv" -FILES_python-opencv = "${PYTHON_SITEPACKAGES_DIR}/*" -RDEPENDS_python-opencv = "python-core python-numpy" - -SUMMARY_python3-opencv = "Python bindings to opencv" -FILES_python3-opencv = "${PYTHON_SITEPACKAGES_DIR}/*" -RDEPENDS_python3-opencv = "python3-core python3-numpy" - -do_install_append() { - cp ${S}/include/opencv/*.h ${D}${includedir}/opencv/ - sed -i '/blobtrack/d' ${D}${includedir}/opencv/cvaux.h - - # Move Python files into correct library folder (for multilib build) - if [ "$libdir" != "/usr/lib" -a -d ${D}/usr/lib ]; then - mv ${D}/usr/lib/* ${D}/${libdir}/ - rm -rf ${D}/usr/lib - fi - - if ${@bb.utils.contains("PACKAGECONFIG", "samples", "true", "false", d)}; then - install -d ${D}${datadir}/OpenCV/samples/bin/ - cp -f bin/*-tutorial-* bin/*-example-* ${D}${datadir}/OpenCV/samples/bin/ - fi -} diff --git a/meta-rcar-gen3-adas/recipes-graphics/wayland/weston-1.11.0/0001-Allow-to-boot-without-input-device.patch b/meta-rcar-gen3-adas/recipes-graphics/wayland/weston-1.11.0/0001-Allow-to-boot-without-input-device.patch deleted file mode 100644 index ff7dd0c..0000000 --- a/meta-rcar-gen3-adas/recipes-graphics/wayland/weston-1.11.0/0001-Allow-to-boot-without-input-device.patch +++ /dev/null @@ -1,24 +0,0 @@ -From d04c556bc8eac439cc87c7cdf9b4446d4a9cecaa Mon Sep 17 00:00:00 2001 -From: Grigory Kletsko <grigory.kletsko@cogentembedded.com> -Date: Fri, 17 Feb 2017 03:06:27 +0300 -Subject: [PATCH] Allow to boot without input device - ---- - src/libinput-seat.c | 1 - - 1 file changed, 1 deletion(-) - -diff --git a/src/libinput-seat.c b/src/libinput-seat.c -index c9f9ed2..20fcaa6 100644 ---- a/src/libinput-seat.c -+++ b/src/libinput-seat.c -@@ -258,7 +258,6 @@ udev_input_enable(struct udev_input *input) - "\t- seats misconfigured " - "(Weston backend option 'seat', " - "udev device property ID_SEAT)\n"); -- return -1; - } - - return 0; --- -2.7.4 - diff --git a/meta-rcar-gen3-adas/recipes-graphics/wayland/weston-1.11.0/0002-Share-toytoolkit-lib.patch b/meta-rcar-gen3-adas/recipes-graphics/wayland/weston-1.11.0/0002-Share-toytoolkit-lib.patch deleted file mode 100644 index 58e5b2a..0000000 --- a/meta-rcar-gen3-adas/recipes-graphics/wayland/weston-1.11.0/0002-Share-toytoolkit-lib.patch +++ /dev/null @@ -1,1394 +0,0 @@ -From 32bb2f9f31945fda4d3a530c7e48632f3249d3a6 Mon Sep 17 00:00:00 2001 -From: Grigory Kletsko <grigory.kletsko@cogentembedded.com> -Date: Tue, 13 Jun 2017 23:51:22 +0300 -Subject: [PATCH 1/4] Share toytoolkit lib - ---- - Makefile.am | 35 +++ - clients/toytoolkit.h | 650 +++++++++++++++++++++++++++++++++++++++++++++++++++ - clients/window.h | 621 ------------------------------------------------ - configure.ac | 2 +- - 4 files changed, 686 insertions(+), 622 deletions(-) - create mode 100644 clients/toytoolkit.h - -diff --git a/Makefile.am b/Makefile.am -index 98cd683..530b868 100644 ---- a/Makefile.am -+++ b/Makefile.am -@@ -6,6 +6,7 @@ libexec_PROGRAMS = - moduledir = $(libdir)/weston - module_LTLIBRARIES = - noinst_LTLIBRARIES = -+lib_LTLIBRARIES = - BUILT_SOURCES = - - AM_DISTCHECK_CONFIGURE_FLAGS = --disable-setuid-install -@@ -100,6 +101,7 @@ weston_SOURCES = \ - shared/matrix.h \ - shared/timespec-util.h \ - shared/zalloc.h \ -+ clients/toytoolkit.h \ - shared/platform.h \ - src/weston-egl-ext.h - -@@ -212,6 +214,7 @@ dist_wayland_session_DATA = src/weston.desktop - - westonincludedir = $(includedir)/weston - westoninclude_HEADERS = \ -+ clients/toytoolkit.h \ - src/version.h \ - src/compositor.h \ - src/compositor-drm.h \ -@@ -603,6 +606,7 @@ noinst_LTLIBRARIES += libtoytoolkit.la - libtoytoolkit_la_SOURCES = \ - clients/window.c \ - clients/window.h \ -+ clients/toytoolkit.h \ - shared/helpers.h - - nodist_libtoytoolkit_la_SOURCES = \ -@@ -624,6 +628,37 @@ libtoytoolkit_la_LIBADD = \ - libshared-cairo.la $(CLOCK_GETTIME_LIBS) -lm - libtoytoolkit_la_CFLAGS = $(AM_CFLAGS) $(CLIENT_CFLAGS) $(CAIRO_EGL_CFLAGS) - -+lib_LTLIBRARIES += libweston-toytoolkit.la -+ -+libweston_toytoolkit_la_SOURCES = \ -+ clients/window.c \ -+ clients/window.h \ -+ clients/toytoolkit.h \ -+ protocol/text-cursor-position-protocol.c \ -+ protocol/text-cursor-position-client-protocol.h \ -+ protocol/scaler-protocol.c \ -+ protocol/scaler-client-protocol.h \ -+ protocol/xdg-shell-unstable-v5-protocol.c \ -+ protocol/xdg-shell-unstable-v5-client-protocol.h \ -+ \ -+ \ -+ protocol/ivi-application-protocol.c \ -+ protocol/ivi-application-client-protocol.h -+ -+BUILT_SOURCES += $(libweston_toytoolkit_la_SOURCES) -+ -+libweston_toytoolkit_la_CFLAGS = \ -+ $(AM_CFLAGS) $(CLIENT_CFLAGS) $(CAIRO_EGL_CFLAGS) \ -+ $(GCC_CFLAGS) -pthread -fvisibility=default -+libweston_toytoolkit_la_LIBADD = \ -+ $(CLIENT_LIBS) \ -+ $(CAIRO_EGL_LIBS) \ -+ libshared-cairo.la -lrt -lm -+libweston_toytoolkit_la_LDFLAGS = -version-info 1:0:1 -+ -+ -+ -+ - weston_flower_SOURCES = clients/flower.c - weston_flower_LDADD = libtoytoolkit.la - weston_flower_CFLAGS = $(AM_CFLAGS) $(CLIENT_CFLAGS) -diff --git a/clients/toytoolkit.h b/clients/toytoolkit.h -new file mode 100644 -index 0000000..f75b671 ---- /dev/null -+++ b/clients/toytoolkit.h -@@ -0,0 +1,650 @@ -+/* -+ * Copyright © 2008 Kristian Høgsberg -+ * -+ * Permission is hereby granted, free of charge, to any person obtaining a -+ * copy of this software and associated documentation files (the "Software"), -+ * to deal in the Software without restriction, including without limitation -+ * the rights to use, copy, modify, merge, publish, distribute, sublicense, -+ * and/or sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following conditions: -+ * -+ * The above copyright notice and this permission notice (including the next -+ * paragraph) shall be included in all copies or substantial portions of the -+ * Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL -+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER -+ * DEALINGS IN THE SOFTWARE. -+ */ -+ -+#ifndef _TOYTOOLKIT_H_ -+#define _TOYTOOLKIT_H_ -+ -+#include <xkbcommon/xkbcommon.h> -+#include <wayland-client.h> -+#include <cairo.h> -+ -+ -+struct window; -+struct widget; -+struct display; -+struct input; -+struct output; -+ -+struct task { -+ void (*run)(struct task *task, uint32_t events); -+ struct wl_list link; -+}; -+ -+struct rectangle { -+ int32_t x; -+ int32_t y; -+ int32_t width; -+ int32_t height; -+}; -+ -+struct display * -+display_create(int *argc, char *argv[]); -+ -+void -+display_destroy(struct display *display); -+ -+void -+display_set_user_data(struct display *display, void *data); -+ -+void * -+display_get_user_data(struct display *display); -+ -+struct wl_display * -+display_get_display(struct display *display); -+ -+int -+display_has_subcompositor(struct display *display); -+ -+cairo_device_t * -+display_get_cairo_device(struct display *display); -+ -+struct wl_compositor * -+display_get_compositor(struct display *display); -+ -+struct output * -+display_get_output(struct display *display); -+ -+uint32_t -+display_get_serial(struct display *display); -+ -+typedef void (*display_global_handler_t)(struct display *display, -+ uint32_t name, -+ const char *interface, -+ uint32_t version, void *data); -+ -+void -+display_set_global_handler(struct display *display, -+ display_global_handler_t handler); -+void -+display_set_global_handler_remove(struct display *display, -+ display_global_handler_t remove_handler); -+void * -+display_bind(struct display *display, uint32_t name, -+ const struct wl_interface *interface, uint32_t version); -+ -+typedef void (*display_output_handler_t)(struct output *output, void *data); -+ -+/* -+ * The output configure handler is called, when a new output is connected -+ * and we know its current mode, or when the current mode changes. -+ * Test and set the output user data in your handler to know, if the -+ * output is new. Note: 'data' in the configure handler is the display -+ * user data. -+ */ -+void -+display_set_output_configure_handler(struct display *display, -+ display_output_handler_t handler); -+ -+struct wl_data_source * -+display_create_data_source(struct display *display); -+ -+#ifdef EGL_NO_DISPLAY -+EGLDisplay -+display_get_egl_display(struct display *d); -+ -+EGLConfig -+display_get_argb_egl_config(struct display *d); -+ -+int -+display_acquire_window_surface(struct display *display, -+ struct window *window, -+ EGLContext ctx); -+void -+display_release_window_surface(struct display *display, -+ struct window *window); -+#endif -+ -+#define SURFACE_OPAQUE 0x01 -+#define SURFACE_SHM 0x02 -+ -+#define SURFACE_HINT_RESIZE 0x10 -+ -+#define SURFACE_HINT_RGB565 0x100 -+ -+cairo_surface_t * -+display_create_surface(struct display *display, -+ struct wl_surface *surface, -+ struct rectangle *rectangle, -+ uint32_t flags); -+ -+struct wl_buffer * -+display_get_buffer_for_surface(struct display *display, -+ cairo_surface_t *surface); -+ -+struct wl_cursor_image * -+display_get_pointer_image(struct display *display, int pointer); -+ -+void -+display_defer(struct display *display, struct task *task); -+ -+void -+display_watch_fd(struct display *display, -+ int fd, uint32_t events, struct task *task); -+ -+void -+display_unwatch_fd(struct display *display, int fd); -+ -+void -+display_run(struct display *d); -+ -+void -+display_exit(struct display *d); -+ -+int -+display_get_data_device_manager_version(struct display *d); -+ -+enum cursor_type { -+ CURSOR_BOTTOM_LEFT, -+ CURSOR_BOTTOM_RIGHT, -+ CURSOR_BOTTOM, -+ CURSOR_DRAGGING, -+ CURSOR_LEFT_PTR, -+ CURSOR_LEFT, -+ CURSOR_RIGHT, -+ CURSOR_TOP_LEFT, -+ CURSOR_TOP_RIGHT, -+ CURSOR_TOP, -+ CURSOR_IBEAM, -+ CURSOR_HAND1, -+ CURSOR_WATCH, -+ CURSOR_DND_MOVE, -+ CURSOR_DND_COPY, -+ CURSOR_DND_FORBIDDEN, -+ -+ CURSOR_BLANK -+}; -+ -+typedef void (*window_key_handler_t)(struct window *window, struct input *input, -+ uint32_t time, uint32_t key, uint32_t unicode, -+ enum wl_keyboard_key_state state, void *data); -+ -+typedef void (*window_keyboard_focus_handler_t)(struct window *window, -+ struct input *device, void *data); -+ -+typedef void (*window_data_handler_t)(struct window *window, -+ struct input *input, -+ float x, float y, -+ const char **types, -+ void *data); -+ -+typedef void (*window_drop_handler_t)(struct window *window, -+ struct input *input, -+ int32_t x, int32_t y, void *data); -+ -+typedef void (*window_close_handler_t)(void *data); -+typedef void (*window_fullscreen_handler_t)(struct window *window, void *data); -+ -+typedef void (*window_output_handler_t)(struct window *window, struct output *output, -+ int enter, void *data); -+typedef void (*window_state_changed_handler_t)(struct window *window, -+ void *data); -+ -+typedef void (*widget_resize_handler_t)(struct widget *widget, -+ int32_t width, int32_t height, -+ void *data); -+typedef void (*widget_redraw_handler_t)(struct widget *widget, void *data); -+ -+typedef int (*widget_enter_handler_t)(struct widget *widget, -+ struct input *input, -+ float x, float y, void *data); -+typedef void (*widget_leave_handler_t)(struct widget *widget, -+ struct input *input, void *data); -+typedef int (*widget_motion_handler_t)(struct widget *widget, -+ struct input *input, uint32_t time, -+ float x, float y, void *data); -+typedef void (*widget_button_handler_t)(struct widget *widget, -+ struct input *input, uint32_t time, -+ uint32_t button, -+ enum wl_pointer_button_state state, -+ void *data); -+typedef void (*widget_touch_down_handler_t)(struct widget *widget, -+ struct input *input, -+ uint32_t serial, -+ uint32_t time, -+ int32_t id, -+ float x, -+ float y, -+ void *data); -+typedef void (*widget_touch_up_handler_t)(struct widget *widget, -+ struct input *input, -+ uint32_t serial, -+ uint32_t time, -+ int32_t id, -+ void *data); -+typedef void (*widget_touch_motion_handler_t)(struct widget *widget, -+ struct input *input, -+ uint32_t time, -+ int32_t id, -+ float x, -+ float y, -+ void *data); -+typedef void (*widget_touch_frame_handler_t)(struct widget *widget, -+ struct input *input, void *data); -+typedef void (*widget_touch_cancel_handler_t)(struct widget *widget, -+ struct input *input, void *data); -+typedef void (*widget_axis_handler_t)(struct widget *widget, -+ struct input *input, uint32_t time, -+ uint32_t axis, -+ wl_fixed_t value, -+ void *data); -+ -+typedef void (*widget_pointer_frame_handler_t)(struct widget *widget, -+ struct input *input, -+ void *data); -+ -+typedef void (*widget_axis_source_handler_t)(struct widget *widget, -+ struct input *input, -+ uint32_t source, -+ void *data); -+ -+typedef void (*widget_axis_stop_handler_t)(struct widget *widget, -+ struct input *input, -+ uint32_t time, -+ uint32_t axis, -+ void *data); -+ -+typedef void (*widget_axis_discrete_handler_t)(struct widget *widget, -+ struct input *input, -+ uint32_t axis, -+ int32_t discrete, -+ void *data); -+ -+struct window * -+window_create(struct display *display); -+struct window * -+window_create_custom(struct display *display); -+ -+void -+window_set_parent(struct window *window, struct window *parent_window); -+struct window * -+window_get_parent(struct window *window); -+ -+int -+window_has_focus(struct window *window); -+ -+typedef void (*menu_func_t)(void *data, struct input *input, int index); -+ -+struct window * -+window_create_menu(struct display *display, -+ struct input *input, uint32_t time, -+ menu_func_t func, const char **entries, int count, -+ void *user_data); -+void -+window_show_menu(struct display *display, -+ struct input *input, uint32_t time, struct window *parent, -+ int32_t x, int32_t y, -+ menu_func_t func, const char **entries, int count); -+ -+void -+window_show_frame_menu(struct window *window, -+ struct input *input, uint32_t time); -+ -+int -+window_get_buffer_transform(struct window *window); -+ -+void -+window_set_buffer_transform(struct window *window, -+ enum wl_output_transform transform); -+ -+uint32_t -+window_get_buffer_scale(struct window *window); -+ -+void -+window_set_buffer_scale(struct window *window, -+ int32_t scale); -+ -+uint32_t -+window_get_output_scale(struct window *window); -+ -+void -+window_destroy(struct window *window); -+ -+struct widget * -+window_add_widget(struct window *window, void *data); -+ -+enum subsurface_mode { -+ SUBSURFACE_SYNCHRONIZED, -+ SUBSURFACE_DESYNCHRONIZED -+}; -+ -+struct widget * -+window_add_subsurface(struct window *window, void *data, -+ enum subsurface_mode default_mode); -+ -+typedef void (*data_func_t)(void *data, size_t len, -+ int32_t x, int32_t y, void *user_data); -+ -+struct display * -+window_get_display(struct window *window); -+void -+window_move(struct window *window, struct input *input, uint32_t time); -+void -+window_get_allocation(struct window *window, struct rectangle *allocation); -+void -+window_schedule_redraw(struct window *window); -+void -+window_schedule_resize(struct window *window, int width, int height); -+ -+cairo_surface_t * -+window_get_surface(struct window *window); -+ -+struct wl_surface * -+window_get_wl_surface(struct window *window); -+ -+struct wl_subsurface * -+widget_get_wl_subsurface(struct widget *widget); -+ -+enum window_buffer_type { -+ WINDOW_BUFFER_TYPE_EGL_WINDOW, -+ WINDOW_BUFFER_TYPE_SHM, -+}; -+ -+void -+display_surface_damage(struct display *display, cairo_surface_t *cairo_surface, -+ int32_t x, int32_t y, int32_t width, int32_t height); -+ -+void -+window_set_buffer_type(struct window *window, enum window_buffer_type type); -+ -+enum window_buffer_type -+window_get_buffer_type(struct window *window); -+ -+int -+window_is_fullscreen(struct window *window); -+ -+void -+window_set_fullscreen(struct window *window, int fullscreen); -+ -+int -+window_is_maximized(struct window *window); -+ -+void -+window_set_maximized(struct window *window, int maximized); -+ -+int -+window_is_resizing(struct window *window); -+ -+void -+window_set_minimized(struct window *window); -+ -+void -+window_set_user_data(struct window *window, void *data); -+ -+void * -+window_get_user_data(struct window *window); -+ -+void -+window_set_key_handler(struct window *window, -+ window_key_handler_t handler); -+ -+void -+window_set_keyboard_focus_handler(struct window *window, -+ window_keyboard_focus_handler_t handler); -+ -+void -+window_set_data_handler(struct window *window, -+ window_data_handler_t handler); -+ -+void -+window_set_drop_handler(struct window *window, -+ window_drop_handler_t handler); -+ -+void -+window_set_close_handler(struct window *window, -+ window_close_handler_t handler); -+void -+window_set_fullscreen_handler(struct window *window, -+ window_fullscreen_handler_t handler); -+void -+window_set_output_handler(struct window *window, -+ window_output_handler_t handler); -+void -+window_set_state_changed_handler(struct window *window, -+ window_state_changed_handler_t handler); -+ -+void -+window_set_title(struct window *window, const char *title); -+ -+const char * -+window_get_title(struct window *window); -+ -+void -+window_set_text_cursor_position(struct window *window, int32_t x, int32_t y); -+ -+enum preferred_format { -+ WINDOW_PREFERRED_FORMAT_NONE, -+ WINDOW_PREFERRED_FORMAT_RGB565 -+}; -+ -+void -+window_set_preferred_format(struct window *window, -+ enum preferred_format format); -+ -+int -+widget_set_tooltip(struct widget *parent, char *entry, float x, float y); -+ -+void -+widget_destroy_tooltip(struct widget *parent); -+ -+struct widget * -+widget_add_widget(struct widget *parent, void *data); -+ -+void -+widget_destroy(struct widget *widget); -+void -+widget_set_default_cursor(struct widget *widget, int cursor); -+void -+widget_get_allocation(struct widget *widget, struct rectangle *allocation); -+ -+void -+widget_set_allocation(struct widget *widget, -+ int32_t x, int32_t y, int32_t width, int32_t height); -+void -+widget_set_size(struct widget *widget, int32_t width, int32_t height); -+void -+widget_set_transparent(struct widget *widget, int transparent); -+void -+widget_schedule_resize(struct widget *widget, int32_t width, int32_t height); -+ -+void * -+widget_get_user_data(struct widget *widget); -+ -+cairo_t * -+widget_cairo_create(struct widget *widget); -+ -+struct wl_surface * -+widget_get_wl_surface(struct widget *widget); -+ -+uint32_t -+widget_get_last_time(struct widget *widget); -+ -+void -+widget_input_region_add(struct widget *widget, const struct rectangle *rect); -+ -+void -+widget_set_redraw_handler(struct widget *widget, -+ widget_redraw_handler_t handler); -+void -+widget_set_resize_handler(struct widget *widget, -+ widget_resize_handler_t handler); -+void -+widget_set_enter_handler(struct widget *widget, -+ widget_enter_handler_t handler); -+void -+widget_set_leave_handler(struct widget *widget, -+ widget_leave_handler_t handler); -+void -+widget_set_motion_handler(struct widget *widget, -+ widget_motion_handler_t handler); -+void -+widget_set_button_handler(struct widget *widget, -+ widget_button_handler_t handler); -+void -+widget_set_touch_down_handler(struct widget *widget, -+ widget_touch_down_handler_t handler); -+void -+widget_set_touch_up_handler(struct widget *widget, -+ widget_touch_up_handler_t handler); -+void -+widget_set_touch_motion_handler(struct widget *widget, -+ widget_touch_motion_handler_t handler); -+void -+widget_set_touch_frame_handler(struct widget *widget, -+ widget_touch_frame_handler_t handler); -+void -+widget_set_touch_cancel_handler(struct widget *widget, -+ widget_touch_cancel_handler_t handler); -+void -+widget_set_axis_handler(struct widget *widget, -+ widget_axis_handler_t handler); -+void -+widget_set_pointer_frame_handler(struct widget *widget, -+ widget_pointer_frame_handler_t handler); -+void -+widget_set_axis_handlers(struct widget *widget, -+ widget_axis_handler_t axis_handler, -+ widget_axis_source_handler_t axis_source_handler, -+ widget_axis_stop_handler_t axis_stop_handler, -+ widget_axis_discrete_handler_t axis_discrete_handler); -+ -+void -+widget_schedule_redraw(struct widget *widget); -+void -+widget_set_use_cairo(struct widget *widget, int use_cairo); -+ -+struct widget * -+window_frame_create(struct window *window, void *data); -+ -+void -+window_frame_set_child_size(struct widget *widget, int child_width, -+ int child_height); -+ -+void -+input_set_pointer_image(struct input *input, int pointer); -+ -+void -+input_get_position(struct input *input, int32_t *x, int32_t *y); -+ -+int -+input_get_touch(struct input *input, int32_t id, float *x, float *y); -+ -+#define MOD_SHIFT_MASK 0x01 -+#define MOD_ALT_MASK 0x02 -+#define MOD_CONTROL_MASK 0x04 -+ -+uint32_t -+input_get_modifiers(struct input *input); -+ -+void -+touch_grab(struct input *input, int32_t touch_id); -+ -+void -+touch_ungrab(struct input *input); -+ -+void -+input_grab(struct input *input, struct widget *widget, uint32_t button); -+ -+void -+input_ungrab(struct input *input); -+ -+struct widget * -+input_get_focus_widget(struct input *input); -+ -+struct display * -+input_get_display(struct input *input); -+ -+struct wl_seat * -+input_get_seat(struct input *input); -+ -+struct wl_data_device * -+input_get_data_device(struct input *input); -+ -+void -+input_set_selection(struct input *input, -+ struct wl_data_source *source, uint32_t time); -+ -+void -+input_accept(struct input *input, const char *type); -+ -+ -+void -+input_receive_drag_data(struct input *input, const char *mime_type, -+ data_func_t func, void *user_data); -+int -+input_receive_drag_data_to_fd(struct input *input, -+ const char *mime_type, int fd); -+ -+int -+input_receive_selection_data(struct input *input, const char *mime_type, -+ data_func_t func, void *data); -+int -+input_receive_selection_data_to_fd(struct input *input, -+ const char *mime_type, int fd); -+ -+void -+output_set_user_data(struct output *output, void *data); -+ -+void * -+output_get_user_data(struct output *output); -+ -+void -+output_set_destroy_handler(struct output *output, -+ display_output_handler_t handler); -+ -+void -+output_get_allocation(struct output *output, struct rectangle *allocation); -+ -+struct wl_output * -+output_get_wl_output(struct output *output); -+ -+enum wl_output_transform -+output_get_transform(struct output *output); -+ -+uint32_t -+output_get_scale(struct output *output); -+ -+const char * -+output_get_make(struct output *output); -+ -+const char * -+output_get_model(struct output *output); -+ -+void -+keysym_modifiers_add(struct wl_array *modifiers_map, -+ const char *name); -+ -+xkb_mod_mask_t -+keysym_modifiers_get_mask(struct wl_array *modifiers_map, -+ const char *name); -+ -+#endif -diff --git a/clients/window.h b/clients/window.h -index 8c8568f..3a16017 100644 ---- a/clients/window.h -+++ b/clients/window.h -@@ -26,629 +26,9 @@ - - #include "config.h" - --#include <xkbcommon/xkbcommon.h> --#include <wayland-client.h> --#include <cairo.h> -+#include "toytoolkit.h" - #include "shared/config-parser.h" - #include "shared/zalloc.h" - #include "shared/platform.h" - --struct window; --struct widget; --struct display; --struct input; --struct output; -- --struct task { -- void (*run)(struct task *task, uint32_t events); -- struct wl_list link; --}; -- --struct rectangle { -- int32_t x; -- int32_t y; -- int32_t width; -- int32_t height; --}; -- --struct display * --display_create(int *argc, char *argv[]); -- --void --display_destroy(struct display *display); -- --void --display_set_user_data(struct display *display, void *data); -- --void * --display_get_user_data(struct display *display); -- --struct wl_display * --display_get_display(struct display *display); -- --int --display_has_subcompositor(struct display *display); -- --cairo_device_t * --display_get_cairo_device(struct display *display); -- --struct wl_compositor * --display_get_compositor(struct display *display); -- --struct output * --display_get_output(struct display *display); -- --uint32_t --display_get_serial(struct display *display); -- --typedef void (*display_global_handler_t)(struct display *display, -- uint32_t name, -- const char *interface, -- uint32_t version, void *data); -- --void --display_set_global_handler(struct display *display, -- display_global_handler_t handler); --void --display_set_global_handler_remove(struct display *display, -- display_global_handler_t remove_handler); --void * --display_bind(struct display *display, uint32_t name, -- const struct wl_interface *interface, uint32_t version); -- --typedef void (*display_output_handler_t)(struct output *output, void *data); -- --/* -- * The output configure handler is called, when a new output is connected -- * and we know its current mode, or when the current mode changes. -- * Test and set the output user data in your handler to know, if the -- * output is new. Note: 'data' in the configure handler is the display -- * user data. -- */ --void --display_set_output_configure_handler(struct display *display, -- display_output_handler_t handler); -- --struct wl_data_source * --display_create_data_source(struct display *display); -- --#ifdef EGL_NO_DISPLAY --EGLDisplay --display_get_egl_display(struct display *d); -- --EGLConfig --display_get_argb_egl_config(struct display *d); -- --int --display_acquire_window_surface(struct display *display, -- struct window *window, -- EGLContext ctx); --void --display_release_window_surface(struct display *display, -- struct window *window); --#endif -- --#define SURFACE_OPAQUE 0x01 --#define SURFACE_SHM 0x02 -- --#define SURFACE_HINT_RESIZE 0x10 -- --#define SURFACE_HINT_RGB565 0x100 -- --cairo_surface_t * --display_create_surface(struct display *display, -- struct wl_surface *surface, -- struct rectangle *rectangle, -- uint32_t flags); -- --struct wl_buffer * --display_get_buffer_for_surface(struct display *display, -- cairo_surface_t *surface); -- --struct wl_cursor_image * --display_get_pointer_image(struct display *display, int pointer); -- --void --display_defer(struct display *display, struct task *task); -- --void --display_watch_fd(struct display *display, -- int fd, uint32_t events, struct task *task); -- --void --display_unwatch_fd(struct display *display, int fd); -- --void --display_run(struct display *d); -- --void --display_exit(struct display *d); -- --int --display_get_data_device_manager_version(struct display *d); -- --enum cursor_type { -- CURSOR_BOTTOM_LEFT, -- CURSOR_BOTTOM_RIGHT, -- CURSOR_BOTTOM, -- CURSOR_DRAGGING, -- CURSOR_LEFT_PTR, -- CURSOR_LEFT, -- CURSOR_RIGHT, -- CURSOR_TOP_LEFT, -- CURSOR_TOP_RIGHT, -- CURSOR_TOP, -- CURSOR_IBEAM, -- CURSOR_HAND1, -- CURSOR_WATCH, -- CURSOR_DND_MOVE, -- CURSOR_DND_COPY, -- CURSOR_DND_FORBIDDEN, -- -- CURSOR_BLANK --}; -- --typedef void (*window_key_handler_t)(struct window *window, struct input *input, -- uint32_t time, uint32_t key, uint32_t unicode, -- enum wl_keyboard_key_state state, void *data); -- --typedef void (*window_keyboard_focus_handler_t)(struct window *window, -- struct input *device, void *data); -- --typedef void (*window_data_handler_t)(struct window *window, -- struct input *input, -- float x, float y, -- const char **types, -- void *data); -- --typedef void (*window_drop_handler_t)(struct window *window, -- struct input *input, -- int32_t x, int32_t y, void *data); -- --typedef void (*window_close_handler_t)(void *data); --typedef void (*window_fullscreen_handler_t)(struct window *window, void *data); -- --typedef void (*window_output_handler_t)(struct window *window, struct output *output, -- int enter, void *data); --typedef void (*window_state_changed_handler_t)(struct window *window, -- void *data); -- --typedef void (*widget_resize_handler_t)(struct widget *widget, -- int32_t width, int32_t height, -- void *data); --typedef void (*widget_redraw_handler_t)(struct widget *widget, void *data); -- --typedef int (*widget_enter_handler_t)(struct widget *widget, -- struct input *input, -- float x, float y, void *data); --typedef void (*widget_leave_handler_t)(struct widget *widget, -- struct input *input, void *data); --typedef int (*widget_motion_handler_t)(struct widget *widget, -- struct input *input, uint32_t time, -- float x, float y, void *data); --typedef void (*widget_button_handler_t)(struct widget *widget, -- struct input *input, uint32_t time, -- uint32_t button, -- enum wl_pointer_button_state state, -- void *data); --typedef void (*widget_touch_down_handler_t)(struct widget *widget, -- struct input *input, -- uint32_t serial, -- uint32_t time, -- int32_t id, -- float x, -- float y, -- void *data); --typedef void (*widget_touch_up_handler_t)(struct widget *widget, -- struct input *input, -- uint32_t serial, -- uint32_t time, -- int32_t id, -- void *data); --typedef void (*widget_touch_motion_handler_t)(struct widget *widget, -- struct input *input, -- uint32_t time, -- int32_t id, -- float x, -- float y, -- void *data); --typedef void (*widget_touch_frame_handler_t)(struct widget *widget, -- struct input *input, void *data); --typedef void (*widget_touch_cancel_handler_t)(struct widget *widget, -- struct input *input, void *data); --typedef void (*widget_axis_handler_t)(struct widget *widget, -- struct input *input, uint32_t time, -- uint32_t axis, -- wl_fixed_t value, -- void *data); -- --typedef void (*widget_pointer_frame_handler_t)(struct widget *widget, -- struct input *input, -- void *data); -- --typedef void (*widget_axis_source_handler_t)(struct widget *widget, -- struct input *input, -- uint32_t source, -- void *data); -- --typedef void (*widget_axis_stop_handler_t)(struct widget *widget, -- struct input *input, -- uint32_t time, -- uint32_t axis, -- void *data); -- --typedef void (*widget_axis_discrete_handler_t)(struct widget *widget, -- struct input *input, -- uint32_t axis, -- int32_t discrete, -- void *data); -- --struct window * --window_create(struct display *display); --struct window * --window_create_custom(struct display *display); -- --void --window_set_parent(struct window *window, struct window *parent_window); --struct window * --window_get_parent(struct window *window); -- --int --window_has_focus(struct window *window); -- --typedef void (*menu_func_t)(void *data, struct input *input, int index); -- --struct window * --window_create_menu(struct display *display, -- struct input *input, uint32_t time, -- menu_func_t func, const char **entries, int count, -- void *user_data); --void --window_show_menu(struct display *display, -- struct input *input, uint32_t time, struct window *parent, -- int32_t x, int32_t y, -- menu_func_t func, const char **entries, int count); -- --void --window_show_frame_menu(struct window *window, -- struct input *input, uint32_t time); -- --int --window_get_buffer_transform(struct window *window); -- --void --window_set_buffer_transform(struct window *window, -- enum wl_output_transform transform); -- --uint32_t --window_get_buffer_scale(struct window *window); -- --void --window_set_buffer_scale(struct window *window, -- int32_t scale); -- --uint32_t --window_get_output_scale(struct window *window); -- --void --window_destroy(struct window *window); -- --struct widget * --window_add_widget(struct window *window, void *data); -- --enum subsurface_mode { -- SUBSURFACE_SYNCHRONIZED, -- SUBSURFACE_DESYNCHRONIZED --}; -- --struct widget * --window_add_subsurface(struct window *window, void *data, -- enum subsurface_mode default_mode); -- --typedef void (*data_func_t)(void *data, size_t len, -- int32_t x, int32_t y, void *user_data); -- --struct display * --window_get_display(struct window *window); --void --window_move(struct window *window, struct input *input, uint32_t time); --void --window_get_allocation(struct window *window, struct rectangle *allocation); --void --window_schedule_redraw(struct window *window); --void --window_schedule_resize(struct window *window, int width, int height); -- --cairo_surface_t * --window_get_surface(struct window *window); -- --struct wl_surface * --window_get_wl_surface(struct window *window); -- --struct wl_subsurface * --widget_get_wl_subsurface(struct widget *widget); -- --enum window_buffer_type { -- WINDOW_BUFFER_TYPE_EGL_WINDOW, -- WINDOW_BUFFER_TYPE_SHM, --}; -- --void --display_surface_damage(struct display *display, cairo_surface_t *cairo_surface, -- int32_t x, int32_t y, int32_t width, int32_t height); -- --void --window_set_buffer_type(struct window *window, enum window_buffer_type type); -- --enum window_buffer_type --window_get_buffer_type(struct window *window); -- --int --window_is_fullscreen(struct window *window); -- --void --window_set_fullscreen(struct window *window, int fullscreen); -- --int --window_is_maximized(struct window *window); -- --void --window_set_maximized(struct window *window, int maximized); -- --int --window_is_resizing(struct window *window); -- --void --window_set_minimized(struct window *window); -- --void --window_set_user_data(struct window *window, void *data); -- --void * --window_get_user_data(struct window *window); -- --void --window_set_key_handler(struct window *window, -- window_key_handler_t handler); -- --void --window_set_keyboard_focus_handler(struct window *window, -- window_keyboard_focus_handler_t handler); -- --void --window_set_data_handler(struct window *window, -- window_data_handler_t handler); -- --void --window_set_drop_handler(struct window *window, -- window_drop_handler_t handler); -- --void --window_set_close_handler(struct window *window, -- window_close_handler_t handler); --void --window_set_fullscreen_handler(struct window *window, -- window_fullscreen_handler_t handler); --void --window_set_output_handler(struct window *window, -- window_output_handler_t handler); --void --window_set_state_changed_handler(struct window *window, -- window_state_changed_handler_t handler); -- --void --window_set_title(struct window *window, const char *title); -- --const char * --window_get_title(struct window *window); -- --void --window_set_text_cursor_position(struct window *window, int32_t x, int32_t y); -- --enum preferred_format { -- WINDOW_PREFERRED_FORMAT_NONE, -- WINDOW_PREFERRED_FORMAT_RGB565 --}; -- --void --window_set_preferred_format(struct window *window, -- enum preferred_format format); -- --int --widget_set_tooltip(struct widget *parent, char *entry, float x, float y); -- --void --widget_destroy_tooltip(struct widget *parent); -- --struct widget * --widget_add_widget(struct widget *parent, void *data); -- --void --widget_destroy(struct widget *widget); --void --widget_set_default_cursor(struct widget *widget, int cursor); --void --widget_get_allocation(struct widget *widget, struct rectangle *allocation); -- --void --widget_set_allocation(struct widget *widget, -- int32_t x, int32_t y, int32_t width, int32_t height); --void --widget_set_size(struct widget *widget, int32_t width, int32_t height); --void --widget_set_transparent(struct widget *widget, int transparent); --void --widget_schedule_resize(struct widget *widget, int32_t width, int32_t height); -- --void * --widget_get_user_data(struct widget *widget); -- --cairo_t * --widget_cairo_create(struct widget *widget); -- --struct wl_surface * --widget_get_wl_surface(struct widget *widget); -- --uint32_t --widget_get_last_time(struct widget *widget); -- --void --widget_input_region_add(struct widget *widget, const struct rectangle *rect); -- --void --widget_set_redraw_handler(struct widget *widget, -- widget_redraw_handler_t handler); --void --widget_set_resize_handler(struct widget *widget, -- widget_resize_handler_t handler); --void --widget_set_enter_handler(struct widget *widget, -- widget_enter_handler_t handler); --void --widget_set_leave_handler(struct widget *widget, -- widget_leave_handler_t handler); --void --widget_set_motion_handler(struct widget *widget, -- widget_motion_handler_t handler); --void --widget_set_button_handler(struct widget *widget, -- widget_button_handler_t handler); --void --widget_set_touch_down_handler(struct widget *widget, -- widget_touch_down_handler_t handler); --void --widget_set_touch_up_handler(struct widget *widget, -- widget_touch_up_handler_t handler); --void --widget_set_touch_motion_handler(struct widget *widget, -- widget_touch_motion_handler_t handler); --void --widget_set_touch_frame_handler(struct widget *widget, -- widget_touch_frame_handler_t handler); --void --widget_set_touch_cancel_handler(struct widget *widget, -- widget_touch_cancel_handler_t handler); --void --widget_set_axis_handler(struct widget *widget, -- widget_axis_handler_t handler); --void --widget_set_pointer_frame_handler(struct widget *widget, -- widget_pointer_frame_handler_t handler); --void --widget_set_axis_handlers(struct widget *widget, -- widget_axis_handler_t axis_handler, -- widget_axis_source_handler_t axis_source_handler, -- widget_axis_stop_handler_t axis_stop_handler, -- widget_axis_discrete_handler_t axis_discrete_handler); -- --void --widget_schedule_redraw(struct widget *widget); --void --widget_set_use_cairo(struct widget *widget, int use_cairo); -- --struct widget * --window_frame_create(struct window *window, void *data); -- --void --window_frame_set_child_size(struct widget *widget, int child_width, -- int child_height); -- --void --input_set_pointer_image(struct input *input, int pointer); -- --void --input_get_position(struct input *input, int32_t *x, int32_t *y); -- --int --input_get_touch(struct input *input, int32_t id, float *x, float *y); -- --#define MOD_SHIFT_MASK 0x01 --#define MOD_ALT_MASK 0x02 --#define MOD_CONTROL_MASK 0x04 -- --uint32_t --input_get_modifiers(struct input *input); -- --void --touch_grab(struct input *input, int32_t touch_id); -- --void --touch_ungrab(struct input *input); -- --void --input_grab(struct input *input, struct widget *widget, uint32_t button); -- --void --input_ungrab(struct input *input); -- --struct widget * --input_get_focus_widget(struct input *input); -- --struct display * --input_get_display(struct input *input); -- --struct wl_seat * --input_get_seat(struct input *input); -- --struct wl_data_device * --input_get_data_device(struct input *input); -- --void --input_set_selection(struct input *input, -- struct wl_data_source *source, uint32_t time); -- --void --input_accept(struct input *input, const char *type); -- -- --void --input_receive_drag_data(struct input *input, const char *mime_type, -- data_func_t func, void *user_data); --int --input_receive_drag_data_to_fd(struct input *input, -- const char *mime_type, int fd); -- --int --input_receive_selection_data(struct input *input, const char *mime_type, -- data_func_t func, void *data); --int --input_receive_selection_data_to_fd(struct input *input, -- const char *mime_type, int fd); -- --void --output_set_user_data(struct output *output, void *data); -- --void * --output_get_user_data(struct output *output); -- --void --output_set_destroy_handler(struct output *output, -- display_output_handler_t handler); -- --void --output_get_allocation(struct output *output, struct rectangle *allocation); -- --struct wl_output * --output_get_wl_output(struct output *output); -- --enum wl_output_transform --output_get_transform(struct output *output); -- --uint32_t --output_get_scale(struct output *output); -- --const char * --output_get_make(struct output *output); -- --const char * --output_get_model(struct output *output); -- --void --keysym_modifiers_add(struct wl_array *modifiers_map, -- const char *name); -- --xkb_mod_mask_t --keysym_modifiers_get_mask(struct wl_array *modifiers_map, -- const char *name); -- - #endif -diff --git a/configure.ac b/configure.ac -index 1d11864..15057df 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -35,7 +35,7 @@ AC_PROG_SED - - # Initialize libtool - LT_PREREQ([2.2]) --LT_INIT([disable-static]) -+LT_INIT([shared static]) - - AC_ARG_VAR([WESTON_NATIVE_BACKEND], - [Set the native backend to use, if Weston is not running under Wayland nor X11. @<:@default=drm-backend.so@:>@]) --- -2.7.4 - diff --git a/meta-rcar-gen3-adas/recipes-graphics/wayland/weston-1.11.0/0003-add-window-set-fullscreen-at-output.patch b/meta-rcar-gen3-adas/recipes-graphics/wayland/weston-1.11.0/0003-add-window-set-fullscreen-at-output.patch deleted file mode 100644 index d519a49..0000000 --- a/meta-rcar-gen3-adas/recipes-graphics/wayland/weston-1.11.0/0003-add-window-set-fullscreen-at-output.patch +++ /dev/null @@ -1,83 +0,0 @@ -diff --git a/clients/toytoolkit.h b/clients/toytoolkit.h -index fdf9b57..402836d 100644 ---- a/clients/toytoolkit.h -+++ b/clients/toytoolkit.h -@@ -84,6 +84,12 @@ display_get_compositor(struct display *display); - struct output * - display_get_output(struct display *display); - -+unsigned int -+display_get_outputs_number(struct display *display); -+ -+struct output * -+display_get_output_by_index(struct display *display, unsigned int index); -+ - uint32_t - display_get_serial(struct display *display); - -@@ -372,6 +378,9 @@ window_is_fullscreen(struct window *window); - void - window_set_fullscreen(struct window *window, int fullscreen); - -+void -+window_set_fullscreen_at_output(struct window *window, int fullscreen, struct output *output); -+ - int - window_is_maximized(struct window *window); - -diff --git a/clients/window.c b/clients/window.c -index 0e73f5b..2d38796 100644 ---- a/clients/window.c -+++ b/clients/window.c -@@ -4364,6 +4364,21 @@ window_set_fullscreen(struct window *window, int fullscreen) - xdg_surface_unset_fullscreen(window->xdg_surface); - } - -+void -+window_set_fullscreen_at_output(struct window *window, int fullscreen, struct output *output) -+{ -+ if (!window->xdg_surface) -+ return; -+ -+ if (window->fullscreen == fullscreen) -+ return; -+ -+ if (fullscreen) -+ xdg_surface_set_fullscreen(window->xdg_surface, output ? output_get_wl_output(output) : NULL); -+ else -+ xdg_surface_unset_fullscreen(window->xdg_surface); -+} -+ - int - window_is_maximized(struct window *window) - { -@@ -5743,6 +5758,29 @@ display_get_output(struct display *display) - return container_of(display->output_list.next, struct output, link); - } - -+unsigned int -+display_get_outputs_number(struct display *display) -+{ -+ return wl_list_length(&display->output_list); -+} -+ -+struct output * -+display_get_output_by_index(struct display *display, unsigned int index) -+{ -+ int i; -+ int n = wl_list_length(&display->output_list); -+ struct wl_list *item; -+ -+ if (index >= n) -+ return NULL; -+ -+ item = display->output_list.next; -+ for (i = 0; i < index; i++) -+ item = item->next; -+ -+ return container_of(item, struct output, link); -+} -+ - struct wl_compositor * - display_get_compositor(struct display *display) - { diff --git a/meta-rcar-gen3-adas/recipes-graphics/wayland/weston-1.11.0/0004-Add-display_poll-function.patch b/meta-rcar-gen3-adas/recipes-graphics/wayland/weston-1.11.0/0004-Add-display_poll-function.patch deleted file mode 100644 index d1a9725..0000000 --- a/meta-rcar-gen3-adas/recipes-graphics/wayland/weston-1.11.0/0004-Add-display_poll-function.patch +++ /dev/null @@ -1,77 +0,0 @@ -diff --git a/clients/toytoolkit.h b/clients/toytoolkit.h -index 402836d..767a84e 100644 ---- a/clients/toytoolkit.h -+++ b/clients/toytoolkit.h -@@ -173,6 +173,9 @@ display_unwatch_fd(struct display *display, int fd); - void - display_run(struct display *d); - -+int -+display_poll(struct display *display, int timeout); -+ - void - display_exit(struct display *d); - -diff --git a/clients/window.c b/clients/window.c -index 2d38796..8540553 100644 ---- a/clients/window.c -+++ b/clients/window.c -@@ -6011,6 +6011,58 @@ display_run(struct display *display) - } - } - -+int -+display_poll(struct display *display, int timeout) -+{ -+ struct task *task; -+ struct epoll_event ep[16]; -+ int i, count, ret; -+ -+ display->running = 1; -+ while (!wl_list_empty(&display->deferred_list)) { -+ task = container_of(display->deferred_list.prev, -+ struct task, link); -+ wl_list_remove(&task->link); -+ task->run(task, 0); -+ } -+ -+ /* ...prepare for a reading */ -+ while (wl_display_prepare_read(display->display) != 0) -+ { -+ /* ...dispatch all pending events and repeat attempt */ -+ wl_display_dispatch_pending(display->display); -+ } -+ -+ /* ...flush all outstanding commands to a display */ -+ if (wl_display_flush(display->display) < 0) { -+ return -1; -+ } -+ -+ if (!display->running) -+ return -1; -+ -+ count = epoll_wait(display->epoll_fd, ep, ARRAY_LENGTH(ep), timeout); -+ if (!count) { -+ wl_display_cancel_read(display->display); -+ return 0; -+ } -+ -+ if (count > 0) { -+ /* ...read display events (if any) before we do any drawing */ -+ if (wl_display_read_events(display->display) < 0) { -+ return -1; -+ } -+ -+ /* ...process pending display events (if any) */ -+ if (wl_display_dispatch_pending(display->display) < 0) { -+ return -1; -+ } -+ } else if (count < 0) { -+ wl_display_cancel_read(display->display); -+ return count; -+ } -+} -+ - void - display_exit(struct display *display) - { diff --git a/meta-rcar-gen3-adas/recipes-graphics/wayland/weston-1.11.0/0005-Add-wl-ivi-shell-surface-creating-support.patch b/meta-rcar-gen3-adas/recipes-graphics/wayland/weston-1.11.0/0005-Add-wl-ivi-shell-surface-creating-support.patch deleted file mode 100644 index 5c732b1..0000000 --- a/meta-rcar-gen3-adas/recipes-graphics/wayland/weston-1.11.0/0005-Add-wl-ivi-shell-surface-creating-support.patch +++ /dev/null @@ -1,56 +0,0 @@ -From 626341e48f4159d91ff39af2d0dc7bc720521121 Mon Sep 17 00:00:00 2001 -From: Grigory Kletsko <grigory.kletsko@cogentembedded.com> -Date: Tue, 13 Jun 2017 23:58:37 +0300 -Subject: [PATCH 4/4] Add wl ivi shell sirface creating support - ---- - ivi-shell/ivi-layout-export.h | 19 +++++++++++++++++++ - ivi-shell/ivi-layout.c | 2 ++ - 2 files changed, 21 insertions(+) - -diff --git a/ivi-shell/ivi-layout-export.h b/ivi-shell/ivi-layout-export.h -index 33aa820..78dab61 100644 ---- a/ivi-shell/ivi-layout-export.h -+++ b/ivi-shell/ivi-layout-export.h -@@ -149,6 +149,25 @@ struct ivi_layout_interface { - */ - int32_t (*commit_changes)(void); - -+ /** -+ * \brief Creates an ivi_layout_surface. -+ * -+ * \return IVI_SUCCEEDED if the method call was successful -+ * \return IVI_FAILED if the method call was failed -+ */ -+ struct ivi_layout_surface* (*surface_create)( -+ struct weston_surface *wl_surface, -+ uint32_t id_surface); -+ -+ /** -+ * \brief Configure an ivi_layout_surface -+ * -+ * \return IVI_SUCCEEDED if the method call was successful -+ * \return IVI_FAILED if the method call was failed -+ */ -+ void (*surface_configure)(struct ivi_layout_surface *ivisurf, -+ int32_t width, int32_t height); -+ - /** - * surface controller interface - */ -diff --git a/ivi-shell/ivi-layout.c b/ivi-shell/ivi-layout.c -index 7fa8b33..161694d 100644 ---- a/ivi-shell/ivi-layout.c -+++ b/ivi-shell/ivi-layout.c -@@ -1985,6 +1985,8 @@ static struct ivi_layout_interface ivi_layout_interface = { - * commit all changes - */ - .commit_changes = ivi_layout_commit_changes, -+ .surface_create = ivi_layout_surface_create, -+ .surface_configure = ivi_layout_surface_configure, - - /** - * surface controller interfaces --- -2.7.4 - diff --git a/meta-rcar-gen3-adas/recipes-graphics/wayland/weston-1.11.0/0006-Add-widget_set_surface_allocation-func.patch b/meta-rcar-gen3-adas/recipes-graphics/wayland/weston-1.11.0/0006-Add-widget_set_surface_allocation-func.patch deleted file mode 100644 index 7fb1ce6..0000000 --- a/meta-rcar-gen3-adas/recipes-graphics/wayland/weston-1.11.0/0006-Add-widget_set_surface_allocation-func.patch +++ /dev/null @@ -1,50 +0,0 @@ -From e513edbcb6d870c9ce956f0a092d01540073b750 Mon Sep 17 00:00:00 2001 -From: Grigory Kletsko <grigory.kletsko@cogentembedded.com> -Date: Tue, 13 Dec 2016 00:43:11 +0300 -Subject: [PATCH] Add widget_set_surface_allocation func - ---- - clients/toytoolkit.h | 3 +++ - clients/window.c | 12 ++++++++++++ - 2 files changed, 15 insertions(+) - -diff --git a/clients/toytoolkit.h b/clients/toytoolkit.h -index 767a84e..d0e73ab 100644 ---- a/clients/toytoolkit.h -+++ b/clients/toytoolkit.h -@@ -469,6 +469,9 @@ void - widget_set_allocation(struct widget *widget, - int32_t x, int32_t y, int32_t width, int32_t height); - void -+widget_set_surface_allocation(struct widget *widget, -+ int32_t x, int32_t y, int32_t width, int32_t height); -+void - widget_set_size(struct widget *widget, int32_t width, int32_t height); - void - widget_set_transparent(struct widget *widget, int transparent); -diff --git a/clients/window.c b/clients/window.c -index 0114ece..820cd78 100644 ---- a/clients/window.c -+++ b/clients/window.c -@@ -1695,6 +1695,18 @@ widget_set_allocation(struct widget *widget, - } - - void -+widget_set_surface_allocation(struct widget *widget, -+ int32_t x, int32_t y, int32_t width, int32_t height) -+{ -+ if (widget->surface) { -+ widget->surface->allocation.x = x; -+ widget->surface->allocation.y = y; -+ widget->surface->allocation.width = width; -+ widget->surface->allocation.height = height; -+ } -+} -+ -+void - widget_set_transparent(struct widget *widget, int transparent) - { - widget->opaque = !transparent; --- -2.7.4 - diff --git a/meta-rcar-gen3-adas/recipes-graphics/wayland/weston-1.11.0/0007-Add-call-for-setting-fullscreen-with-IVI.patch b/meta-rcar-gen3-adas/recipes-graphics/wayland/weston-1.11.0/0007-Add-call-for-setting-fullscreen-with-IVI.patch deleted file mode 100644 index dcecbde..0000000 --- a/meta-rcar-gen3-adas/recipes-graphics/wayland/weston-1.11.0/0007-Add-call-for-setting-fullscreen-with-IVI.patch +++ /dev/null @@ -1,44 +0,0 @@ -From 9f1228fad3e549fd0ead4fd37573e02b874d1661 Mon Sep 17 00:00:00 2001 -From: Grigory Kletsko <grigory.kletsko@cogentembedded.com> -Date: Tue, 13 Dec 2016 18:20:11 +0300 -Subject: [PATCH] Add call for setting fullscreen with IVI - ---- - clients/toytoolkit.h | 3 +++ - clients/window.c | 6 ++++++ - 2 files changed, 9 insertions(+) - -diff --git a/clients/toytoolkit.h b/clients/toytoolkit.h -index d0e73ab..1759a52 100644 ---- a/clients/toytoolkit.h -+++ b/clients/toytoolkit.h -@@ -384,6 +384,9 @@ window_set_fullscreen(struct window *window, int fullscreen); - void - window_set_fullscreen_at_output(struct window *window, int fullscreen, struct output *output); - -+void -+window_set_fullscreen_hack(struct window *window, int fullscreen); -+ - int - window_is_maximized(struct window *window); - -diff --git a/clients/window.c b/clients/window.c -index 820cd78..638e2ff 100644 ---- a/clients/window.c -+++ b/clients/window.c -@@ -4391,6 +4391,12 @@ window_set_fullscreen_at_output(struct window *window, int fullscreen, struct ou - xdg_surface_unset_fullscreen(window->xdg_surface); - } - -+void -+window_set_fullscreen_hack(struct window *window, int fullscreen) -+{ -+ window->fullscreen = fullscreen; -+} -+ - int - window_is_maximized(struct window *window) - { --- -2.7.4 - diff --git a/meta-rcar-gen3-adas/recipes-graphics/wayland/weston-init.bbappend b/meta-rcar-gen3-adas/recipes-graphics/wayland/weston-init.bbappend deleted file mode 100644 index 35bafac..0000000 --- a/meta-rcar-gen3-adas/recipes-graphics/wayland/weston-init.bbappend +++ /dev/null @@ -1,11 +0,0 @@ -FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:" - -SRC_URI_append = " \ - file://weston_exp.sh \ -" - -# Add Weston configuration script -do_install_append() { - install -d ${D}/etc/profile.d - install -m 0755 ${WORKDIR}/weston_exp.sh ${D}/etc/profile.d -} diff --git a/meta-rcar-gen3-adas/recipes-graphics/wayland/weston-init/weston_exp.sh b/meta-rcar-gen3-adas/recipes-graphics/wayland/weston-init/weston_exp.sh deleted file mode 100755 index 18be2ad..0000000 --- a/meta-rcar-gen3-adas/recipes-graphics/wayland/weston-init/weston_exp.sh +++ /dev/null @@ -1,11 +0,0 @@ -#!/bin/sh - -if test -z "$XDG_RUNTIME_DIR"; then - export XDG_RUNTIME_DIR=/run/user/`id -u` - if ! test -d "$XDG_RUNTIME_DIR"; then - mkdir --parents $XDG_RUNTIME_DIR - chmod 0700 $XDG_RUNTIME_DIR - fi -fi - -export QT_QPA_PLATFORM=wayland diff --git a/meta-rcar-gen3-adas/recipes-graphics/wayland/weston_1.11.0.bbappend b/meta-rcar-gen3-adas/recipes-graphics/wayland/weston_1.11.0.bbappend deleted file mode 100644 index 254657f..0000000 --- a/meta-rcar-gen3-adas/recipes-graphics/wayland/weston_1.11.0.bbappend +++ /dev/null @@ -1,13 +0,0 @@ -FILESEXTRAPATHS_prepend := '${THISDIR}/${PN}-${PV}:' - -SRC_URI_append = " \ - file://0001-Allow-to-boot-without-input-device.patch \ - file://0002-Share-toytoolkit-lib.patch \ - file://0003-add-window-set-fullscreen-at-output.patch \ - file://0004-Add-display_poll-function.patch \ - file://0005-Add-wl-ivi-shell-surface-creating-support.patch \ - file://0006-Add-widget_set_surface_allocation-func.patch \ - file://0007-Add-call-for-setting-fullscreen-with-IVI.patch \ -" - -FILES_${PN} += " ${libdir}/libweston-toytoolkit*"
\ No newline at end of file diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux-firmware/linux-firmware_git.bbappend b/meta-rcar-gen3-adas/recipes-kernel/linux-firmware/linux-firmware_git.bbappend index e494b0c..c620ef4 100644 --- a/meta-rcar-gen3-adas/recipes-kernel/linux-firmware/linux-firmware_git.bbappend +++ b/meta-rcar-gen3-adas/recipes-kernel/linux-firmware/linux-firmware_git.bbappend @@ -1,63 +1,14 @@ -SRCREV = "dbb85a5154a5da7fa94bf9caa3658d4b6999cee6" +# Support additional firmware for WiLink8 modules +# +# TIInit_11.8.32.bts V4.2 is not in the linux-firmware repository. -# Changing SRCREV cause some license files to change. -# As a result we need to change md5 for some these files. -# The only way to do this is to overwrite whole LIC_FILES_CHKSUM - -LIC_FILES_CHKSUM = "\ - file://LICENCE.Abilis;md5=b5ee3f410780e56711ad48eadc22b8bc \ - file://LICENCE.adsp_sst;md5=615c45b91a5a4a9fe046d6ab9a2df728 \ - file://LICENCE.agere;md5=af0133de6b4a9b2522defd5f188afd31 \ - file://LICENSE.amd-ucode;md5=3a0de451253cc1edbf30a3c621effee3 \ - file://LICENCE.atheros_firmware;md5=30a14c7823beedac9fa39c64fdd01a13 \ - file://LICENSE.atmel;md5=aa74ac0c60595dee4d4e239107ea77a3 \ - file://LICENCE.broadcom_bcm43xx;md5=3160c14df7228891b868060e1951dfbc \ - file://LICENCE.ca0132;md5=209b33e66ee5be0461f13d31da392198 \ - file://LICENCE.cavium;md5=c37aaffb1ebe5939b2580d073a95daea \ - file://LICENCE.chelsio_firmware;md5=819aa8c3fa453f1b258ed8d168a9d903 \ - file://LICENCE.cw1200;md5=f0f770864e7a8444a5c5aa9d12a3a7ed \ - file://LICENSE.dib0700;md5=f7411825c8a555a1a3e5eab9ca773431 \ - file://LICENCE.e100;md5=ec0f84136766df159a3ae6d02acdf5a8 \ - file://LICENCE.ene_firmware;md5=ed67f0f62f8f798130c296720b7d3921 \ - file://LICENCE.fw_sst_0f28;md5=6353931c988ad52818ae733ac61cd293 \ - file://LICENCE.go7007;md5=c0bb9f6aaaba55b0529ee9b30aa66beb \ - file://LICENSE.hfi1_firmware;md5=5e7b6e586ce7339d12689e49931ad444 \ - file://LICENCE.i2400m;md5=14b901969e23c41881327c0d9e4b7d36 \ - file://LICENSE.i915;md5=2b0b2e0d20984affd4490ba2cba02570 \ - file://LICENCE.ibt_firmware;md5=fdbee1ddfe0fb7ab0b2fcd6b454a366b \ - file://LICENCE.IntcSST2;md5=9e7d8bea77612d7cc7d9e9b54b623062 \ - file://LICENCE.it913x;md5=1fbf727bfb6a949810c4dbfa7e6ce4f8 \ - file://LICENCE.iwlwifi_firmware;md5=3fd842911ea93c29cd32679aa23e1c88 \ - file://LICENCE.kaweth;md5=b1d876e562f4b3b8d391ad8395dfe03f \ - file://LICENCE.Marvell;md5=9ddea1734a4baf3c78d845151f42a37a \ - file://LICENCE.moxa;md5=1086614767d8ccf744a923289d3d4261 \ - file://LICENCE.mwl8335;md5=9a6271ee0e644404b2ff3c61fd070983 \ - file://LICENCE.myri10ge_firmware;md5=42e32fb89f6b959ca222e25ac8df8fed \ - file://LICENCE.nvidia;md5=4428a922ed3ba2ceec95f076a488ce07 \ - file://LICENCE.OLPC;md5=5b917f9d8c061991be4f6f5f108719cd \ - file://LICENCE.open-ath9k-htc-firmware;md5=1b33c9f4d17bc4d457bdb23727046837 \ - file://LICENCE.phanfw;md5=954dcec0e051f9409812b561ea743bfa \ - file://LICENCE.qat_firmware;md5=9e7d8bea77612d7cc7d9e9b54b623062 \ - file://LICENCE.qla1280;md5=d6895732e622d950609093223a2c4f5d \ - file://LICENCE.qla2xxx;md5=f5ce8529ec5c17cb7f911d2721d90e91 \ - file://LICENSE.QualcommAtheros_ar3k;md5=b5fe244fb2b532311de1472a3bc06da5 \ - file://LICENSE.QualcommAtheros_ath10k;md5=b5fe244fb2b532311de1472a3bc06da5 \ - file://LICENCE.r8a779x_usb3;md5=4c1671656153025d7076105a5da7e498 \ - file://LICENCE.ralink_a_mediatek_company_firmware;md5=728f1a85fd53fd67fa8d7afb080bc435 \ - file://LICENCE.ralink-firmware.txt;md5=ab2c269277c45476fb449673911a2dfd \ - file://LICENCE.rtlwifi_firmware.txt;md5=00d06cfd3eddd5a2698948ead2ad54a5 \ - file://LICENCE.siano;md5=602c79ae3f98f1e73d880fd9f940a418 \ - file://LICENCE.tda7706-firmware.txt;md5=835997cf5e3c131d0dddd695c7d9103e \ - file://LICENCE.ti-connectivity;md5=c5e02be633f1499c109d1652514d85ec \ - file://LICENCE.ti-keystone;md5=3a86335d32864b0bef996bee26cc0f2c \ - file://LICENCE.ueagle-atm4-firmware;md5=4ed7ea6b507ccc583b9d594417714118 \ - file://LICENCE.via_vt6656;md5=e4159694cba42d4377a912e78a6e850f \ - file://LICENCE.wl1251;md5=ad3f81922bb9e197014bb187289d3b5b \ - file://LICENCE.xc4000;md5=0ff51d2dc49fce04814c9155081092f0 \ - file://LICENCE.xc5000;md5=1e170c13175323c32c7f4d0998d53f66 \ - file://LICENCE.xc5000c;md5=12b02efa3049db65d524aeb418dd87ca \ - \ - file://LICENSE.amdgpu;md5=3fe8a3430700a518990c3b3d75297209 \ - file://LICENSE.radeon;md5=69612f4f7b141a97659cb1d609a1bde2 \ - file://WHENCE;md5=39dbb62d53262685b8bd977329dc4c10 \ +SRC_URI_append = " \ + https://git.ti.com/ti-bt/service-packs/blobs/raw/3acb49e97179320cb7564d202d0dde23ad7bd0a2/initscripts/TIInit_11.8.32.bts \ " + +SRC_URI[md5sum] = "b1e142773e8ef0537b93895ebe2fcae3" +SRC_URI[sha256sum] = "962322c05857ad6b1fb81467bdfc59c125e04a6a8eaabf7f24b742ddd68c3bfa" + +do_install_append() { + install -m 644 ${WORKDIR}/TIInit_11.8.32.bts ${D}/lib/firmware/ti-connectivity/ +} diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0001-arm64-dts-renesas-disable-r8a7796-hscif0-dma.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0001-arm64-dts-renesas-disable-r8a7796-hscif0-dma.patch new file mode 100644 index 0000000..31a66b7 --- /dev/null +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0001-arm64-dts-renesas-disable-r8a7796-hscif0-dma.patch @@ -0,0 +1,34 @@ +From 9f2cf209ef8235f33683ca941fd0d7bdcca4078d Mon Sep 17 00:00:00 2001 +From: Matt Porter <mporter@konsulko.com> +Date: Sun, 17 Dec 2017 21:44:41 -0500 +Subject: [PATCH] arm64: dts: renesas: disable r8a7796 hscif0 dma + +When streaming A2DP audio on WiLink8, DMA errors are +seen from the rcar-dmac driver servicing hscif0. As +a result, data corruption is seen by the UIM service +managing the link to the Wilink8 device. This data +corruption manifests as dropped frames and audibly as +"skips" in the audio playback. + +Workaround this issue by disabling DMA for hscif0. + +Signed-off-by: Matt Porter <mporter@konsulko.com> +--- + arch/arm64/boot/dts/renesas/r8a7796.dtsi | 1 - + 1 file changed, 1 deletion(-) + +diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi +index e3a5c25bc3da..dd97af4bdd60 100644 +--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi ++++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi +@@ -1282,7 +1282,6 @@ + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>; +- dma-names = "tx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + status = "disabled"; + }; +-- +2.11.0 + diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0001-arm64-dts-renesas-preserve-drm-HDMI-connector-naming.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0001-arm64-dts-renesas-preserve-drm-HDMI-connector-naming.patch new file mode 100644 index 0000000..4f87f30 --- /dev/null +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0001-arm64-dts-renesas-preserve-drm-HDMI-connector-naming.patch @@ -0,0 +1,54 @@ +From df5348a8ec6f611fe3fc51d7c12898b8830d89d3 Mon Sep 17 00:00:00 2001 +From: Matt Porter <mporter@konsulko.com> +Date: Wed, 13 Dec 2017 12:49:20 -0500 +Subject: [PATCH] arm64: dts: renesas: preserve drm HDMI connector naming on KF + +Kingfisher adds encoders on ports 0 and 2 of the R-Car +display unit. The bare ULCB SK has only an HDMI encoder +in use on port 1. When the system is booted with an SK +dtb, port 1's HDMI encoder is assigned as HDMI-A-1 because +it is the first (and only) encoder present. When booting +a KF dtb, port 0's HDMI encoder preceeds port1 in the dtb due +to incremental ordering of the endpoint port nodes. This causes +the KF HDMI to be assigned HDMI-A-1 and the SK HDMI to be assigned +as HDMI-A-2. In order to preserve the SK's HDMI output naming as +connector HDMI-A-1, reorder the endpoint port nodes so that port1 +is first. + +Change-Id: Ibbb1975c2383a526a54c257fb7d68d32a042d468 +Signed-off-by: Matt Porter <mporter@konsulko.com> +--- + arch/arm64/boot/dts/renesas/r8a7796.dtsi | 10 +++++----- + 1 file changed, 5 insertions(+), 5 deletions(-) + +diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi +index bf37b8aa0e2f..e3a5c25bc3da 100644 +--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi ++++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi +@@ -2391,11 +2391,6 @@ + #address-cells = <1>; + #size-cells = <0>; + +- port@0 { +- reg = <0>; +- du_out_rgb: endpoint { +- }; +- }; + port@1 { + reg = <1>; + du_out_hdmi0: endpoint { +@@ -2406,6 +2401,11 @@ + du_out_lvds0: endpoint { + }; + }; ++ port@0 { ++ reg = <0>; ++ du_out_rgb: endpoint { ++ }; ++ }; + }; + }; + +-- +2.11.0 + diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/ulcb.cfg b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/ulcb.cfg index 002480e..0fd7e07 100644 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/ulcb.cfg +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/ulcb.cfg @@ -71,16 +71,10 @@ CONFIG_DRM_I2C_ADV7511=y CONFIG_TOUCHSCREEN_EDT_FT5X06=y CONFIG_SERIAL_SH_SCI_DMA=y CONFIG_STAGING=y -CONFIG_MOST=y -CONFIG_MOSTCORE=y -CONFIG_AIM_CDEV=y -CONFIG_AIM_NETWORK=y -CONFIG_AIM_SOUND=y -CONFIG_AIM_V4L2=y -CONFIG_HDM_DIM2=y CONFIG_UIO=y CONFIG_SENSORS_EMC2103=y CONFIG_PMBUS=y CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_DS1307_HWMON=y CONFIG_SENSORS_LM63=y +CONFIG_MMC_SDHI_SEQ_WORKAROUND=y diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas_4.9.bbappend b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas_4.9.bbappend index 110d8bb..c4cad0f 100644 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas_4.9.bbappend +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas_4.9.bbappend @@ -3,6 +3,17 @@ FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:" COMPATIBLE_MACHINE_eagle = "eagle" COMPATIBLE_MACHINE_v3msk = "v3msk" +BRANCH = "v4.9/rcar-3.5.9" +SRCREV = "2c20c9881d53f1b5c7a3ebf55bb83ec15902d0d0" + +KERNEL_MODULE_PROBECONF += "btwilink" +module_conf_btwilink = "blacklist btwilink" + +SRC_URI_remove = " \ + file://0001-dmaengine-rcar-dmac-ensure-CHCR-DE-bit-is-actually-0.patch \ + file://0002-dmaengine-rcar-dmac-use-TCRB-instead-of-TCR-for-resi.patch \ +" + SRC_URI_append = " \ ${@bb.utils.contains('MACHINE_FEATURES', 'h3ulcb-had', ' file://hyperflash.cfg', '', d)} \ ${@base_conditional("SDHI_SEQ", "1", " file://sdhi_seq.cfg", "", d)} \ @@ -41,7 +52,6 @@ SRC_URI_append = " \ file://0034-media-soc_camera-Fix-VIDIOC_S_SELECTION-ioctl-miscal.patch \ file://0035-regulator-fixed-probe-after-i2c.patch \ file://0040-arm64-dts-renesas-add-ADAS-boards.patch \ - file://0041-arm64-dts-renesas-ulcb-enlarge-cma-region.patch \ file://0042-arm64-dts-renesas-r8a7795-es1-h3ulcb-disable-eMMC.patch \ file://0043-arm64-dts-renesas-ulcb-use-versaclock-for-du-rgb-and-lvds.patch \ file://0044-pinctrl-r8a779x-add-mlb-pinmux.patch \ @@ -71,6 +81,8 @@ SRC_URI_append = " \ file://0078-MOST-aim-fix-null-pointer-crash.patch \ file://0079-Revert-dmaengine-rcar-dmac-use-TCRB-instead-of-TCR-f.patch \ file://0082-gpio-pca953x-fix-interrupt-trigger.patch \ + file://0001-arm64-dts-renesas-preserve-drm-HDMI-connector-naming.patch \ + file://0001-arm64-dts-renesas-disable-r8a7796-hscif0-dma.patch \ " SRC_URI_append_r8a7797 = " \ diff --git a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/client.conf b/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/client.conf deleted file mode 100644 index a17325b..0000000 --- a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/client.conf +++ /dev/null @@ -1,36 +0,0 @@ -# This file is part of PulseAudio. -# -# PulseAudio is free software; you can redistribute it and/or modify -# it under the terms of the GNU Lesser General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# PulseAudio is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>. - -## Configuration file for PulseAudio clients. See pulse-client.conf(5) for -## more information. Default values are commented out. Use either ; or # for -## commenting. - -; default-sink = -; default-source = -; default-server = -; default-dbus-server = - -; autospawn = yes -; allow-autospawn-for-root = no -; daemon-binary = /usr/bin/pulseaudio -; extra-arguments = --log-target=syslog - -; cookie-file = - -; enable-shm = yes -; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB - -; auto-connect-localhost = no -; auto-connect-display = no diff --git a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/daemon.conf b/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/daemon.conf deleted file mode 100644 index 5d42a9e..0000000 --- a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/daemon.conf +++ /dev/null @@ -1,87 +0,0 @@ -# This file is part of PulseAudio. -# -# PulseAudio is free software; you can redistribute it and/or modify -# it under the terms of the GNU Lesser General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# PulseAudio is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 -# USA. - -## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for -## more information. Default values are commented out. Use either ; or # for -## commenting. - -; daemonize = no -; fail = yes -; allow-module-loading = yes -; allow-exit = yes -; use-pid-file = yes -; system-instance = no -; local-server-type = user -; enable-shm = yes -; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB -; lock-memory = no -; cpu-limit = no - -; high-priority = yes -; nice-level = -11 - -; realtime-scheduling = yes -; realtime-priority = 5 - -; exit-idle-time = 20 -; scache-idle-time = 20 - -; dl-search-path = (depends on architecture) - -; load-default-script-file = yes -; default-script-file = /etc/pulse/default.pa - -log-target = null -; log-level = notice -; log-meta = no -; log-time = no -; log-backtrace = 0 - -; resample-method = speex-float-1 -; enable-remixing = yes -; enable-lfe-remixing = no - -; flat-volumes = yes - -; rlimit-fsize = -1 -; rlimit-data = -1 -; rlimit-stack = -1 -; rlimit-core = -1 -; rlimit-as = -1 -; rlimit-rss = -1 -; rlimit-nproc = -1 -; rlimit-nofile = 256 -; rlimit-memlock = -1 -; rlimit-locks = -1 -; rlimit-sigpending = -1 -; rlimit-msgqueue = -1 -; rlimit-nice = 31 -; rlimit-rtprio = 9 -; rlimit-rttime = 1000000 - -; default-sample-format = s16le -default-sample-rate = 48000 -; alternate-sample-rate = 48000 -; default-sample-channels = 2 -; default-channel-map = front-left,front-right - -; default-fragments = 4 -; default-fragment-size-msec = 25 - -; enable-deferred-volume = yes -; deferred-volume-safety-margin-usec = 8000 -; deferred-volume-extra-delay-usec = 0 diff --git a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/hifi b/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/hifi deleted file mode 100644 index e897b98..0000000 --- a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/hifi +++ /dev/null @@ -1,50 +0,0 @@ -# Use case Configuration for Renesas H3 board - -SectionVerb { - EnableSequence [ - exec "echo Setting defaults for ak4613" - cdev "hw:ak4613" - cset "name='DVC Out Playback Volume' 30%" - cset "name='DVC In Capture Volume' 10%" - ] - DisableSequence [ - ] -} - - -SectionDevice."Headphone".0 { - Value { - JackName "Headphone Jack" - PlaybackChannels 2 - PlaybackPCM "hw:0" - } - - EnableSequence [ - cdev "hw:ak4613" - cset "name='DVC Out Playback Volume' 30%" - ] - DisableSequence [ - cdev "hw:ak4613" - cset "name='DVC Out Playback Volume' 0%" - ] -} - -SectionDevice."Mic".0 { - Value { - JackName "Mic Jack" - CaptureChannels 2 - CapturePCM "hw:0" - } - - EnableSequence [ - cdev "hw:ak4613" - cset "name='DVC In Capture Volume' 10%" - ] - - DisableSequence [ - cdev "hw:ak4613" - cset "name='DVC In Capture Volume' 0%" - ] -} - - diff --git a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/pulseaudio-bluetooth.conf b/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/pulseaudio-bluetooth.conf deleted file mode 100644 index 925b9b1..0000000 --- a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/pulseaudio-bluetooth.conf +++ /dev/null @@ -1,7 +0,0 @@ -<busconfig> - - <policy user="pulse"> - <allow send_destination="org.bluez"/> - </policy> - -</busconfig> diff --git a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/pulseaudio-ofono.conf b/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/pulseaudio-ofono.conf deleted file mode 100644 index e526d77..0000000 --- a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/pulseaudio-ofono.conf +++ /dev/null @@ -1,15 +0,0 @@ -<busconfig> - - <policy user="pulse"> - <allow own="org.pulseaudio.Server"/> - <allow send_destination="org.bluez"/> - <allow send_destination="org.ofono"/> - <allow send_interface="org.ofono.SimToolkitAgent"/> - <allow send_interface="org.ofono.PushNotificationAgent"/> - <allow send_interface="org.ofono.SmartMessagingAgent"/> - <allow send_interface="org.ofono.PositioningRequestAgent"/> - <allow send_interface="org.ofono.HandsfreeAudioAgent"/> - <allow send_interface="org.ofono.HandsfreeAudioManager"/> - </policy> - -</busconfig> diff --git a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/pulseaudio.init b/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/pulseaudio.init deleted file mode 100755 index db8f965..0000000 --- a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/pulseaudio.init +++ /dev/null @@ -1,48 +0,0 @@ -#!/bin/sh -# -### BEGIN INIT INFO -# Provides: pulseaudio-server -# Required-Start: $local_fs $remote_fs -# Required-Stop: $local_fs $remote_fs -# Default-Start: 2 3 4 5 -# Default-Stop: 0 1 6 -### END INIT INFO - -killproc() { - pid=`/bin/pidof $1` - [ "$pid" != "" ] && kill $pid -} - -read CMDLINE < /proc/cmdline -for x in $CMDLINE; do - case $x in - pulseaudio=false) - echo "pulseaudio disabled" - exit 0; - ;; - esac -done - -case "$1" in - start) - echo "Starting pulseaudio" - start-stop-daemon -S -x pulseaudio -- -D --system --disallow-exit --log-level=3 --log-target=file:/var/log/pa.log - ;; - - stop) - echo "Stopping pulseaudio" - start-stop-daemon -K -x pulseaudio - ;; - - restart) - $0 stop - sleep 1 - $0 start - ;; - - *) - echo "usage: $0 { start | stop | restart }" - ;; -esac - -exit 0 diff --git a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/rsnddai0ak4613h.conf b/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/rsnddai0ak4613h.conf deleted file mode 100644 index 1c084de..0000000 --- a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/rsnddai0ak4613h.conf +++ /dev/null @@ -1,9 +0,0 @@ -# Use case Configuration for Renesas H3 board - -Comment "Renesas H3 board ak4613 audio card" - -SectionUseCase."HiFi" { - File "hifi" - Comment "Default" -} - diff --git a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/system.pa b/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/system.pa deleted file mode 100644 index 963a7c9..0000000 --- a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/files/system.pa +++ /dev/null @@ -1,82 +0,0 @@ -#!/usr/bin/pulseaudio -nF -# -# This file is part of PulseAudio. -# -# PulseAudio is free software; you can redistribute it and/or modify it -# under the terms of the GNU Lesser General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# PulseAudio is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU Lesser General Public License -# along with PulseAudio; if not, write to the Free Software Foundation, -# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. - -# This startup script is used only if PulseAudio is started in system -# mode. - -## use static load order to prevent pulseaudio to auto probe MOST devices -## MOST drivers does not like how pulse probing it and crashes system - -## Onboard sound (All R-Car 3 boards) -## use ALSA card plugin to run UCM and initial controls setup -.fail -load-module module-alsa-card device_id=ak4613 rate=48000 use_ucm=1 tsched=yes sink_name=ak4613_output source_name=ak4613_input - -## Kingfisher specific devices (may not present) -.nofail -## PCM3168A card (Kingfisher only) -load-module module-alsa-card device_id=pcm3168a sink_name=pcm3168a_output source_name=pcm3168a_input format=s24-32le rate=48000 -## Radio input (Kingfisher only) -load-module module-alsa-card device_id=radio source_name=radio rate=48000 -## WL18xx PCM interface (Kingfisher only) -load-module module-alsa-card device_id=wl18xx rate=48000 sink_name=bt_output source_name=bt_input - -### Load several protocols -.ifexists module-esound-protocol-unix.so -load-module module-esound-protocol-unix -.endif -load-module module-native-protocol-unix auth-anonymous=1 - -### Automatically restore the volume of streams and devices -load-module module-stream-restore -load-module module-device-restore - -### Automatically restore the default sink/source when changed by the user -### during runtime -### NOTE: This should be loaded as early as possible so that subsequent modules -### that look up the default sink/source get the right value -load-module module-default-device-restore - -### Automatically move streams to the default sink if the sink they are -### connected to dies, similar for sources -load-module module-rescue-streams - -### Make sure we always have a sink around, even if it is a null sink. -load-module module-always-sink - -### Automatically suspend sinks/sources that become idle for too long -# load-module module-suspend-on-idle - -### Enable positioned event sounds -# load-module module-position-event-sounds - -### Automatically load driver modules for Bluetooth hardware -.ifexists module-bluetooth-policy.so -load-module module-bluetooth-policy -.endif - -.ifexists module-bluetooth-discover.so -load-module module-bluetooth-discover headset=auto -.endif - -set-default-sink ak4613_output -set-default-source ak4613_input - -# For Kingfisher board set default source and sink to multichannel soundcard -set-default-sink pcm3168a_output -set-default-source pcm3168a_input diff --git a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/pulseaudio_8.0.bbappend b/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/pulseaudio_8.0.bbappend deleted file mode 100644 index 06710e9..0000000 --- a/meta-rcar-gen3-adas/recipes-multimedia/pulseaudio/pulseaudio_8.0.bbappend +++ /dev/null @@ -1,43 +0,0 @@ -FILESEXTRAPATHS_append := "${THISDIR}/files:" - -PR="r2" - -SRC_URI_append_rcar-gen3 = " \ - file://pulseaudio.init \ - file://rsnddai0ak4613h.conf \ - file://hifi \ - file://system.pa \ - file://daemon.conf \ - file://pulseaudio-bluetooth.conf \ - file://pulseaudio-ofono.conf \ -" - -inherit update-rc.d - -INITSCRIPT_NAME = "pulseaudio" -INITSCRIPT_PARAMS = "defaults 30" - -do_install_append_rcar-gen3() { - install -d ${D}/etc/init.d - install -d ${D}/etc/pulse - install -d ${D}/usr/share/alsa/ucm/rsnddai0ak4613h/ - - install -m 0755 ${WORKDIR}/pulseaudio.init ${D}/etc/init.d/pulseaudio - - install -m 0644 ${WORKDIR}/system.pa ${D}/etc/pulse/system.pa - install -m 0644 ${WORKDIR}/daemon.conf ${D}/etc/pulse/daemon.conf - - install -m 0644 ${WORKDIR}/rsnddai0ak4613h.conf ${D}${datadir}/alsa/ucm/rsnddai0ak4613h/rsnddai0ak4613h.conf - install -m 0644 ${WORKDIR}/hifi ${D}${datadir}/alsa/ucm/rsnddai0ak4613h/hifi - - install -d ${D}/${sysconfdir}/dbus-1/system.d - install -m 644 ${WORKDIR}/pulseaudio-bluetooth.conf ${D}/${sysconfdir}/dbus-1/system.d/ - install -m 644 ${WORKDIR}/pulseaudio-ofono.conf ${D}/${sysconfdir}/dbus-1/system.d/ - - update-rc.d -r ${D} pulseaudio defaults 30 -} - -FILES_${PN}-server += " \ - ${datadir}/alsa/ucm \ - ${datadir}/dbus-1/ \ -" diff --git a/meta-rcar-gen3-adas/recipes-support/glog/glog-0.3.3/0001-Use-pkg-config-for-locating-gflags-and-gmock.patch b/meta-rcar-gen3-adas/recipes-support/glog/glog-0.3.3/0001-Use-pkg-config-for-locating-gflags-and-gmock.patch deleted file mode 100644 index 7208bfe..0000000 --- a/meta-rcar-gen3-adas/recipes-support/glog/glog-0.3.3/0001-Use-pkg-config-for-locating-gflags-and-gmock.patch +++ /dev/null @@ -1,44 +0,0 @@ -From ca8570bad0bbefb450a2cbe40c17eb5a5565f829 Mon Sep 17 00:00:00 2001 -From: Petr Nechaev <petr.nechaev@cogentembedded.com> -Date: Wed, 22 Nov 2017 00:21:45 +0300 -Subject: [PATCH 1/1] Use pkg-config for locating gflags and gmock - -Binaries gflags-config and gmock-config are not generated during -cross-compilation of gflags and gmock so use pkg-config instead. ---- - configure.ac | 14 ++++++++------ - 1 file changed, 8 insertions(+), 6 deletions(-) - -diff --git a/configure.ac b/configure.ac -index 8b458fa..16a6c7e 100644 ---- a/configure.ac -+++ b/configure.ac -@@ -138,17 +138,19 @@ LIBS="$SAVE_LIBS" - # TODO(hamaji): Use official m4 macros provided by testing libraries - # once the m4 macro of Google Mocking becomes ready. - # Check if there is Google Test library installed. --AC_CHECK_PROG(GTEST_CONFIG, gtest-config, "yes") -+# Use pkg-config instead of gtest-config with Yocto -+AC_CHECK_PROG(GTEST_CONFIG, pkg-config, "yes") - if test x"$GTEST_CONFIG" = "xyes"; then -- GTEST_CFLAGS=`gtest-config --cppflags --cxxflags` -- GTEST_LIBS=`gtest-config --ldflags --libs` -+ GTEST_CFLAGS=`pkg-config --cppflags --cxxflags gtest` -+ GTEST_LIBS=`pkg-config --libs gtest` - AC_DEFINE(HAVE_LIB_GTEST, 1, [define if you have google gtest library]) - - # Check if there is Google Mocking library installed. -- AC_CHECK_PROG(GMOCK_CONFIG, gmock-config, "yes") -+ # Use pkg-config instead of gmock-config with Yocto -+ AC_CHECK_PROG(GMOCK_CONFIG, pkg-config, "yes") - if test x"$GMOCK_CONFIG" = "xyes"; then -- GMOCK_CFLAGS=`gmock-config --cppflags --cxxflags` -- GMOCK_LIBS=`gmock-config --ldflags --libs` -+ GMOCK_CFLAGS=`pkg-config --cppflags --cxxflags gmock` -+ GMOCK_LIBS=`pkg-config --libs gmock` - AC_DEFINE(HAVE_LIB_GMOCK, 1, [define if you have google gmock library]) - else - # We don't run test cases which use Google Mocking framework. --- -2.9.5 - diff --git a/meta-rcar-gen3/COPYING.MIT b/meta-rcar-gen3/COPYING.MIT new file mode 100644 index 0000000..89de354 --- /dev/null +++ b/meta-rcar-gen3/COPYING.MIT @@ -0,0 +1,17 @@ +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +THE SOFTWARE. diff --git a/meta-rcar-gen3/README b/meta-rcar-gen3/README new file mode 100644 index 0000000..dd87e65 --- /dev/null +++ b/meta-rcar-gen3/README @@ -0,0 +1,124 @@ +meta-rcar-gen3 +============== + +This layer provides that evaluation board is mounted ARM SoCs of Renesas +Electronics, called the R-Car Generation 3. Currently, this supports +board and the SoCs of the following: + - Board: Salvator-X / SoC: R8A7795 (R-Car H3), R8A7796 (R-Car M3) + - Board: R-Car Starter Kit premier(H3ULCB) / SoC: R8A7795 (R-Car H3) + - Board: R-Car Starter Kit pro(M3ULCB) / SoC: R8A7796 (R-Car M3) + +Patches +======= + +Please submit any patches for this layer to: takamitsu.honda.pv@renesas.com +Please see the MAINTAINERS file for more details. + +Dependencies +============ + +This layer depends on: + + URI: git://git.yoctoproject.org/poky + layers: meta, meta-yocto, meta-yocto-bsp + branch: krogoth + + URI: git://github.com/renesas-rcar/meta-renesas + layers: meta-rcar-gen3 + branch: krogoth + + URI: git://git.linaro.org/openembedded/meta-linaro.git + layers: meta-optee + branch: krogoth + + URI: git://git.openembedded.org/meta-openembedded + layers: meta-oe + branch: krogoth + +Build Instructions +================== + +The following instructions require a Poky installation (or equivalent). + +Initialize a build using the 'oe-init-build-env' script in Poky. e.g.: + + $ source poky/oe-init-build-env + +After that, initialized configure bblayers.conf by adding meta-rcar-gen3 layer. e.g.: + + BBLAYERS ?= " \ + <path to layer>/poky/meta \ + <path to layer>/poky/meta-yocto \ + <path to layer>/poky/meta-yocto-bsp \ + <path to layer>/meta-renesas/meta-rcar-gen3 \ + <path to layer>/meta-linaro/meta-optee \ + <path to layer>/meta-openembedded/meta-oe \ + " + +To build a specific target BSP, configure the associated machine in local.conf: + + MACHINE ??= "<supported board name>" + +Select the SOC + + For H3: r8a7795 + SOC_FAMILY = "r8a7795" + + For M3: r8a7796 + SOC_FAMILY = "r8a7796" + +Must change the package class to ipk files in local.conf: + + PACKAGE_CLASSES ?= "package_ipk" + +Configure for systemd init in local.conf: + + DISTRO_FEATURES_append = " systemd" + VIRTUAL-RUNTIME_init_manager = "systemd" + +Build the target file system image using bitbake: + + $ bitbake core-image-minimal + +After completing the images for the target machine will be available in the output +directory 'tmp/deploy/images/<supported board name>'. + +Images generated: + * Image (generic Linux Kernel binary image file) + * Image-<machine name>.dtb (DTB for target machine) + * core-image-minimal-<machine name>.tar.bz2 (rootfs tar+bzip2) + * core-image-minimal-<machine name>.ext4 (rootfs ext4 format) + * core-image-minimal-<machine name>.cpio.gz (rootfs cpio+gz format) + +Build Instructions for SDK +========================== +This may be changed in the near feature. These instructions are tentative. + +Should define the staticdev in SDK image feature for installing the static libs +to SDK in local.conf. + + SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +Use bitbake -c populate_sdk for generating the toolchain SDK: +For 64-bit target SDK (aarch64): + + $ bitbake core-image-minimal -c populate_sdk + +The SDK can be found in the output directory 'tmp/deploy/sdk' + * poky-glibc-x86_64-core-image-minimal-aarch64-toolchain-x.x.sh + +Usage of toolchain SDK: +Install the SDK to the default: /opt/poky/x.x +For 64-bit target SDK: + + $ sh poky-glibc-x86_64-core-image-minimal-aarch64-toolchain-x.x.sh + +For 64-bit application use environment script in /opt/poky/x.x + + $ source /opt/poky/x.x/environment-setup-aarch64-poky-linux + +ULCB Information +================ +Refer to the following for more information of ULCB: + + http://elinux.org/R-Car diff --git a/meta-rcar-gen3/README.proprietary b/meta-rcar-gen3/README.proprietary new file mode 100644 index 0000000..72f916c --- /dev/null +++ b/meta-rcar-gen3/README.proprietary @@ -0,0 +1,133 @@ +Proprietary libraries for meta-rcar-gen3 +======================================== + +The meta-rcar-gen3 layer of meta-renesas is supported Graphic GLES(GSX) libraries, +proprietary library of multimedia, and ICCOM software. +This README describes how to use these features and setting to local.conf. + +There are 2 main paths: + I/ Board configuration + II/ Build with GLES + III/ Build with Renesas multimedia libraries + +Please check section II to config for GLES. +Please check section III to enable Multimedia functions. + +If you would like to use Linux ICCOM driver and Linux ICCOM library, +please check section IV. + +However, to have a completed local.conf, +please also refer to Build Instruction in meta-renesas/meta-rcar-gen3/README. + +In addition, these libraries are not provided with recipes. If you would like to use, +you will need to get them from Renesas. + +I/ Board configuration +================== +* Add this line to local.conf + For Salvator-X board + MACHINE = "salvator-x" + For R-Car Starter Kit Premier(H3ULCB) board + MACHINE = "h3ulcb" + For R-Car Starter Kit Pro(M3ULCB) board + MACHINE = "m3ulcb" + +* Set SOC family name: + For H3: r8a7795 + SOC_FAMILY = "r8a7795" + For M3: r8a7796 + SOC_FAMILY = "r8a7796" + +II/ Build with GLES +================== + * For wayland with GSX + + 1. Please copy proprietary libraries to the directory of recipes. + 2. Set local.conf the following. + + # Enable Gfx Pkgs + MACHINE_FEATURES_append = " gsx" + MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2" + + # for Wayland/Weston + DISTRO_FEATURES_append = " pam" + PREFERRED_PROVIDER_virtual/libgles1 = "" + PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" + PREFERRED_PROVIDER_virtual/egl = "libegl" + PREFERRED_PROVIDER_virtual/libgl = "" + PREFERRED_PROVIDER_virtual/mesa = "" + PREFERRED_PROVIDER_libgbm = "libgbm" + PREFERRED_PROVIDER_libgbm-dev = "libgbm" + BBMASK = "mesa-gl" + + 3. Run 'bitbake core-image-weston' + +III/ Build with Renesas multimedia libraries +============================================ + Multimedia portions depend on GLES portions. + + A/ Configuration for Multimedia features + 1. Please copy proprietary libraries to the directory of recipes. + 2. Please set local.conf the following. + + # Enable multimedia features. + # This provides package group of plug-ins of the GStreamer, multimedia + # libraries and kernel drivers. + + MACHINE_FEATURES_append = " multimedia" + + B/ Configuration for optional codecs and middleware + 1. Please copy proprietary libraries to the directory of recipes. + 2. Add features to DISTRO_FEATURES_append to local.conf + # Additional configuration in OMX module + " h263dec_lib" - for OMX Media Component H263 Decoder Library + " h264dec_lib" - for OMX Media Component H264 Decoder Library + " h264enc_lib" - for OMX Media Component H.264 Encoder Library + " h265dec_lib" - for OMX Media Component H265 Decoder Library + " mpeg2dec_lib" - for OMX Media Component MPEG2 Decoder Library + " mpeg4dec_lib" - for OMX Media Component MPEG4 Decoder Library + " vc1dec_lib" - for OMX Media Component VC-1 Decoder Library + " divxdec_lib" - for OMX Media Component DivX Decoder Library + " rvdec_lib" - for OMX Media Component RealVideo Decoder Library + " alacdec_lib" - for OMX Media Component ALAC Decoder Library + " flacdec_lib" - for OMX Media Component FLAC Decoder Library + " aaclcdec_lib" - for OMX Media Component AAC-LC Decoder Library + " aaclcdec_mdw" - for AAC-LC 2ch Decoder Middleware for Linux + " aacpv2dec_lib" - for OMX Media Component aacPlus V2 Decoder Library + " aacpv2dec_mdw" - for aacPlus V2 Decoder Middleware for Linux + " mp3dec_lib" - for OMX Media Component MP3 Decoder Library + " mp3dec_mdw" - for MP3 Decoder Middleware for Linux + " wmadec_lib" - for OMX Media Component WMA Standard Decoder Library + " wmadec_mdw" - for WMA Standard Decoder Middleware for Linux + " dddec_lib" - for OMX Media Component Dolby(R) Digital Decoder Library + " dddec_mdw" - for Dolby(R) Digital Decoder Middleware for Linux + " aaclcenc_lib" - for OMX Media Component AAC-LC Encoder Library + " aaclcenc_mdw" - for AAC-LC Encoder Middleware for Linux + " cmsbcm" - for CMS Basic Color Management Middleware for Linux + " cmsblc" - for CMS CMM3 Backlight Control Middleware for Linux + " cmsdgc" - for CMS VSP2 Dynamic Gamma Correction Middleware for Linux + " dtv" - for ISDB-T DTV Software Package for Linux + " dvd" - for DVD Core-Middleware for Linux + " adsp" - for ADSP driver, ADSP interface and ADSP framework for Linux + " avb" - for AVB Software Package for Linux + + Ex: + DISTRO_FEATURES_append = " h264dec_lib h265dec_lib mpeg2dec_lib aaclcdec_lib aaclcdec_mdw" + + C/ Configuration for test packages + Must ensure that Multimedia features have been enabled. + (Please refer to III/A to enable Multimedia.) + Please add feature to DISTRO_FEATURES_append to local.conf. + # Configuration for multimedia test package + + DISTRO_FEATURES_append = " mm-test" + +IV/ Enable Linux ICCOM driver and Linux ICCOM library +===================================================== + For Linux ICCOM driver and Linux ICCOM library + + 1. Please copy proprietary libraries to the directory of recipes. + 2. Please set local.conf the following. + + DISTRO_FEATURES_append = " iccom" +END. diff --git a/meta-rcar-gen3/conf/layer.conf b/meta-rcar-gen3/conf/layer.conf new file mode 100644 index 0000000..7c09bc3 --- /dev/null +++ b/meta-rcar-gen3/conf/layer.conf @@ -0,0 +1,10 @@ +# We have a conf and classes directory, add to BBPATH +BBPATH .= ":${LAYERDIR}" + +# We have recipes-* directories, add to BBFILES +BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \ + ${LAYERDIR}/recipes-*/*/*.bbappend" + +BBFILE_COLLECTIONS += "rcar-gen3" +BBFILE_PATTERN_rcar-gen3 = "^${LAYERDIR}/" +BBFILE_PRIORITY_rcar-gen3 = "6" diff --git a/meta-rcar-gen3/conf/machine/h3ulcb.conf b/meta-rcar-gen3/conf/machine/h3ulcb.conf new file mode 100644 index 0000000..8585364 --- /dev/null +++ b/meta-rcar-gen3/conf/machine/h3ulcb.conf @@ -0,0 +1,48 @@ +#@TYPE: Machine +#@NAME: H3ULCB machine +#@DESCRIPTION: Machine configuration for running H3ULCB + +SOC_FAMILY = "r8a7795" + +DEFAULTTUNE ?= "cortexa57-cortexa53" +require conf/machine/include/tune-cortexa57-cortexa53.inc +require conf/machine/include/${SOC_FAMILY}.inc + +# 32BIT package install (default is disable) +# This variables can be used only in multilib. +USE_32BIT_PKGS ?= "0" +USE_32BIT_WAYLAND ?= "0" +USE_32BIT_MMP ?= "0" + +MACHINE_FEATURES = "" + +KERNEL_IMAGETYPE = "Image" + +# only if not already defined by distro or user! +IMAGE_FSTYPES ?= " tar.bz2 ext4 cpio.gz" + +SERIAL_CONSOLE = "115200 ttySC0" + +# Configuration for kernel +PREFERRED_PROVIDER_virtual/kernel = "linux-renesas" +KERNEL_DEVICETREE = " \ + renesas/r8a7795-h3ulcb.dtb \ + renesas/r8a7795-es1-h3ulcb.dtb \ +" + +# Configuration for ARM Trusted Firmware +EXTRA_IMAGEDEPENDS += " arm-trusted-firmware optee-os" + +# u-boot +PREFERRED_VERSION_u-boot = "v2015.04%" +EXTRA_IMAGEDEPENDS += " u-boot" +UBOOT_MACHINE = "h3ulcb_defconfig" + +# libdrm + mesa +PREFERRED_VERSION_libdrm = "2.4.68" +PREFERRED_VERSION_mesa = "17.%" + +# Add variable to Build Configuration in build log +BUILDCFG_VARS_append = " SOC_FAMILY" + +MACHINEOVERRIDES .= ":ulcb" diff --git a/meta-rcar-gen3/conf/machine/include/r8a7795.inc b/meta-rcar-gen3/conf/machine/include/r8a7795.inc new file mode 100644 index 0000000..e2cc4ac --- /dev/null +++ b/meta-rcar-gen3/conf/machine/include/r8a7795.inc @@ -0,0 +1,3 @@ +SOC_FAMILY =. "rcar-gen3:" +require conf/machine/include/soc-family.inc +LINUXLIBCVERSION = "4.9" diff --git a/meta-rcar-gen3/conf/machine/include/r8a7796.inc b/meta-rcar-gen3/conf/machine/include/r8a7796.inc new file mode 100644 index 0000000..e2cc4ac --- /dev/null +++ b/meta-rcar-gen3/conf/machine/include/r8a7796.inc @@ -0,0 +1,3 @@ +SOC_FAMILY =. "rcar-gen3:" +require conf/machine/include/soc-family.inc +LINUXLIBCVERSION = "4.9" diff --git a/meta-rcar-gen3/conf/machine/include/tune-cortexa57-cortexa53.inc b/meta-rcar-gen3/conf/machine/include/tune-cortexa57-cortexa53.inc new file mode 100644 index 0000000..17f1f25 --- /dev/null +++ b/meta-rcar-gen3/conf/machine/include/tune-cortexa57-cortexa53.inc @@ -0,0 +1,18 @@ +DEFAULTTUNE ?= "cortexa57-cortexa53" +require conf/machine/include/arm/arch-armv8.inc + +TUNEVALID[cortexa57-cortexa53] = "Enable big.LITTLE Cortex-A57.Cortex-A53 specific processor optimizations" +TUNECONFLICTS[aarch64] = "armv4 armv5 armv6 armv7 armv7a" + +TUNE_CCARGS .= "${@bb.utils.contains("TUNE_FEATURES", "aarch64", " -march=armv8-a", "" ,d)}" + +MACHINEOVERRIDES =. "${@bb.utils.contains("TUNE_FEATURES", "cortexa57-cortexa53", "cortexa57-cortexa53:", "" ,d)}" + +TUNE_CCARGS .= "${@bb.utils.contains("TUNE_FEATURES", "cortexa57-cortexa53", " -mtune=cortex-a57.cortex-a53", "", d)}" + +# Little Endian base configs +AVAILTUNES += "cortexa57-cortexa53" +ARMPKGARCH_tune-cortexa57-cortexa53 = "cortexa57-cortexa53" +TUNE_FEATURES_tune-cortexa57-cortexa53 = "${TUNE_FEATURES_tune-aarch64} cortexa57-cortexa53" +PACKAGE_EXTRA_ARCHS_tune-cortexa57-cortexa53 = "${PACKAGE_EXTRA_ARCHS_tune-aarch64} cortexa57-cortexa53" +BASE_LIB_tune-cortexa57-cortexa53 = "lib64" diff --git a/meta-rcar-gen3/conf/machine/include/tune-cortexa57.inc b/meta-rcar-gen3/conf/machine/include/tune-cortexa57.inc new file mode 100644 index 0000000..509aee4 --- /dev/null +++ b/meta-rcar-gen3/conf/machine/include/tune-cortexa57.inc @@ -0,0 +1,18 @@ +DEFAULTTUNE ?= "cortexa57" +require conf/machine/include/arm/arch-armv8.inc + +TUNEVALID[cortexa57] = "Enable Cortex-A57 specific processor optimizations" +TUNECONFLICTS[aarch64] = "armv4 armv5 armv6 armv7 armv7a" + +TUNE_CCARGS .= "${@bb.utils.contains("TUNE_FEATURES", "aarch64", " -march=armv8-a", "" ,d)}" + +MACHINEOVERRIDES =. "${@bb.utils.contains("TUNE_FEATURES", "cortexa57", "cortexa57:", "" ,d)}" + +TUNE_CCARGS .= "${@bb.utils.contains("TUNE_FEATURES", "cortexa57", " -mtune=cortex-a57", "", d)}" + +# Little Endian base configs +AVAILTUNES += "cortexa57" +ARMPKGARCH_tune-cortexa57 = "cortexa57" +TUNE_FEATURES_tune-cortexa57 = "${TUNE_FEATURES_tune-aarch64} cortexa57" +PACKAGE_EXTRA_ARCHS_tune-cortexa57 = "${PACKAGE_EXTRA_ARCHS_tune-aarch64} cortexa57" +BASE_LIB_tune-cortexa57 = "lib64" diff --git a/meta-rcar-gen3/conf/machine/m3ulcb.conf b/meta-rcar-gen3/conf/machine/m3ulcb.conf new file mode 100644 index 0000000..0d792c6 --- /dev/null +++ b/meta-rcar-gen3/conf/machine/m3ulcb.conf @@ -0,0 +1,45 @@ +#@TYPE: Machine +#@NAME: M3ULCB machine +#@DESCRIPTION: Machine configuration for running M3ULCB + +SOC_FAMILY = "r8a7796" + +DEFAULTTUNE ?= "cortexa57-cortexa53" +require conf/machine/include/tune-cortexa57-cortexa53.inc +require conf/machine/include/${SOC_FAMILY}.inc + +# 32BIT package install (default is disable) +# This variables can be used only in multilib. +USE_32BIT_PKGS ?= "0" +USE_32BIT_WAYLAND ?= "0" +USE_32BIT_MMP ?= "0" + +MACHINE_FEATURES = "" + +KERNEL_IMAGETYPE = "Image" + +# only if not already defined by distro or user! +IMAGE_FSTYPES ?= " tar.bz2 ext4 cpio.gz" + +SERIAL_CONSOLE = "115200 ttySC0" + +# Configuration for kernel +PREFERRED_PROVIDER_virtual/kernel = "linux-renesas" +KERNEL_DEVICETREE = "renesas/r8a7796-m3ulcb.dtb" + +# Configuration for ARM Trusted Firmware +EXTRA_IMAGEDEPENDS += " arm-trusted-firmware optee-os" + +# u-boot +PREFERRED_VERSION_u-boot = "v2015.04%" +EXTRA_IMAGEDEPENDS += " u-boot" +UBOOT_MACHINE = "m3ulcb_defconfig" + +# libdrm + mesa +PREFERRED_VERSION_libdrm = "2.4.68" +PREFERRED_VERSION_mesa = "17.%" + +# Add variable to Build Configuration in build log +BUILDCFG_VARS_append = " SOC_FAMILY" + +MACHINEOVERRIDES .= ":ulcb" diff --git a/meta-rcar-gen3/conf/machine/salvator-x.conf b/meta-rcar-gen3/conf/machine/salvator-x.conf new file mode 100644 index 0000000..65212d7 --- /dev/null +++ b/meta-rcar-gen3/conf/machine/salvator-x.conf @@ -0,0 +1,54 @@ +#@TYPE: Machine +#@NAME: Salvator-X machine +#@DESCRIPTION: Machine configuration for running Salvator-X + +DEFAULTTUNE ?= "cortexa57-cortexa53" +require conf/machine/include/tune-cortexa57-cortexa53.inc +require conf/machine/include/${SOC_FAMILY}.inc + +# 32BIT package install (default is disable) +# This variables can be used only in multilib. +USE_32BIT_PKGS ?= "0" +USE_32BIT_WAYLAND ?= "0" +USE_32BIT_MMP ?= "0" + +MACHINE_FEATURES = "" + +KERNEL_IMAGETYPE = "Image" + +# only if not already defined by distro or user! +IMAGE_FSTYPES ?= " tar.bz2 ext4 cpio.gz" + +SERIAL_CONSOLE = "115200 ttySC0" + +# Configuration for kernel +PREFERRED_PROVIDER_virtual/kernel = "linux-renesas" +# Device tree for H3 +KERNEL_DEVICETREE_r8a7795 = " \ + renesas/r8a7795-es1-salvator-x.dtb \ + renesas/r8a7795-salvator-x.dtb \ + renesas/r8a7795-salvator-xs.dtb \ +" +# Device tree for M3 +KERNEL_DEVICETREE_r8a7796 = " \ + renesas/r8a7796-salvator-x.dtb \ + renesas/r8a7796-salvator-xs.dtb \ +" + +# Configuration for ARM Trusted Firmware +EXTRA_IMAGEDEPENDS += " arm-trusted-firmware optee-os" + +# u-boot +PREFERRED_VERSION_u-boot = "v2015.04%" +EXTRA_IMAGEDEPENDS += " u-boot" +# H3 u-boot configure +UBOOT_MACHINE_r8a7795 = "r8a7795_salvator-x_defconfig" +# M3 u-boot configure +UBOOT_MACHINE_r8a7796 = "r8a7796_salvator-x_defconfig" + +# libdrm + mesa +PREFERRED_VERSION_libdrm = "2.4.68" +PREFERRED_VERSION_mesa = "17.%" + +# Add variable to Build Configuration in build log +BUILDCFG_VARS_append = " SOC_FAMILY" diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/bblayers.conf new file mode 100644 index 0000000..96ff8ad --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/bblayers.conf @@ -0,0 +1,16 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \ + ${TOPDIR}/../meta-linaro/meta-optee \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local-wayland.conf new file mode 100644 index 0000000..4359d56 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local-wayland.conf @@ -0,0 +1,269 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "h3ulcb" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.3" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# for Wayland/Weston weston-laucher +DISTRO_FEATURES_append = " pam" + +# Mask the wayland related to GFX +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Mask the gstreamer recipe for MMP +BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer" + +# Add for gstreamer plugins ugly +LICENSE_FLAGS_WHITELIST = "commercial" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local.conf new file mode 100644 index 0000000..eb2f034 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local.conf @@ -0,0 +1,260 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "h3ulcb" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.3" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Mask graphic Pkgs +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/bblayers.conf new file mode 100644 index 0000000..96ff8ad --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/bblayers.conf @@ -0,0 +1,16 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \ + ${TOPDIR}/../meta-linaro/meta-optee \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/local-wayland.conf new file mode 100644 index 0000000..8b8b5ca --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/local-wayland.conf @@ -0,0 +1,281 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "h3ulcb" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.3" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Enable Gfx Pkgs +MACHINE_FEATURES_append = " gsx" +MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2" + +# for Wayland/Weston +DISTRO_FEATURES_append = " pam" +PREFERRED_PROVIDER_virtual/libgles1 = "" +PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" +PREFERRED_PROVIDER_virtual/egl = "libegl" +PREFERRED_PROVIDER_virtual/libgl = "" +PREFERRED_PROVIDER_virtual/mesa = "" +PREFERRED_PROVIDER_libgbm = "libgbm" +PREFERRED_PROVIDER_libgbm-dev = "libgbm" +BBMASK .= "|mesa-gl" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Mask the gstreamer recipe for MMP +BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer" + +# Add for gstreamer plugins ugly +LICENSE_FLAGS_WHITELIST = "commercial" + +# Fix the Warning of gstreamer plugins +RDEPENDS_gstreamer1.0-plugins-bad = "libwayland-egl" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/bblayers.conf new file mode 100644 index 0000000..96ff8ad --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/bblayers.conf @@ -0,0 +1,16 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \ + ${TOPDIR}/../meta-linaro/meta-optee \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/local-wayland.conf new file mode 100644 index 0000000..6825b60 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/local-wayland.conf @@ -0,0 +1,373 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "h3ulcb" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.3" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Enable Gfx Pkgs +MACHINE_FEATURES_append = " gsx" +MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2" + +# for Wayland/Weston +DISTRO_FEATURES_append = " pam" +PREFERRED_PROVIDER_virtual/libgles1 = "" +PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" +PREFERRED_PROVIDER_virtual/egl = "libegl" +PREFERRED_PROVIDER_virtual/libgl = "" +PREFERRED_PROVIDER_virtual/mesa = "" +PREFERRED_PROVIDER_libgbm = "libgbm" +PREFERRED_PROVIDER_libgbm-dev = "libgbm" +BBMASK .= "|mesa-gl" + +# Enable Multimedia features +MACHINE_FEATURES_append = " multimedia" + +# for gstreamer omx plugins +LICENSE_FLAGS_WHITELIST = "commercial" +# for mmp test program +DISTRO_FEATURES_append = " mm-test" + +# for weston v4l2 renderer +#DISTRO_FEATURES_append = " v4l2-renderer" + +# OMX H263 decoder library for Linux (RTM0AC0000XV263D30SL40C) +#DISTRO_FEATURES_append = " h263dec_lib" + +# OMX H264 decoder library for Linux (RTM0AC0000XV264D30SL40C) +DISTRO_FEATURES_append = " h264dec_lib" + +# OMX H264 encoder library for Linux (RTM0AC0000XV264E30SL40C) +#DISTRO_FEATURES_append = " h264enc_lib" + +# OMX H265 decoder library for Linux (RTM0AC0000XV265D30SL40C) +#DISTRO_FEATURES_append = " h265dec_lib" + +# OMX MPEG2 decoder library for Linux (RTM0AC0000XVM2VD30SL40C) +#DISTRO_FEATURES_append = " mpeg2dec_lib" + +# OMX Media Component MPEG4 Decoder Library for Linux (RTM0AC0000XVM4VD30SL40C) +#DISTRO_FEATURES_append = " mpeg4dec_lib" + +# OMX Media Component VC-1 Decoder Library for Linux (RTM0AC0000XVVC1D30SL40C) +#DISTRO_FEATURES_append = " vc1dec_lib" + +# OMX Media Component DivXD Decoder Library for Linux (RTM0AC0000XVDVXD30SL40C) +#DISTRO_FEATURES_append = " divxdec_lib" + +# OMX Media Component RealVideo Decoder Library for Linux (RTM0AC0000XVRLVD30SL40C) +#DISTRO_FEATURES_append = " rvdec_lib" + +# OMX Media Component ALAC Decoder Library for Linux (RTM0AC0000XAALAD30SL40C) +#DISTRO_FEATURES_append = " alacdec_lib" + +# OMX Media Component FLAC Decoder Library for Linux (RTM0AC0000XAFLAD30SL40C) +#DISTRO_FEATURES_append = " flacdec_lib" + +# OMX AAC-LC decoder library for Linux (RTM0AC0000XAAACD30SL40C), +# AAC-LC 2ch decoder middleware library for Linux (RTM0AC0000ADAACMZ1SL40C) +DISTRO_FEATURES_append = " aaclcdec_lib" +DISTRO_FEATURES_append = " aaclcdec_mdw" + +# OMX aacPlus V2 decoder library for Linux (RTM0AC0000XAAAPD30SL40C), +# aacPlus V2 decoder middleware library for Linux (RTM0AC0000ADAAPMZ1SL40C) +#DISTRO_FEATURES_append = " aacpv2dec_lib" +#DISTRO_FEATURES_append = " aacpv2dec_mdw" + +# OMX MP3 decoder library for Linux (RTM0AC0000XAMP3D30SL40C), +# MP3 decoder middleware library for Linux (RTM0AC0000ADMP3MZ1SL40C) +#DISTRO_FEATURES_append = " mp3dec_lib" +#DISTRO_FEATURES_append = " mp3dec_mdw" + +# OMX WMA decoder library for Linux (RTM0AC0000XAWMAD30SL40C), +# WMA decoder middleware library for Linux (RTM0AC0000ADWMAMZ1SL40C) +#DISTRO_FEATURES_append = " wmadec_lib" +#DISTRO_FEATURES_append = " wmadec_mdw" + +# OMX AAC-LC encoder library for Linux (RTM0AC0000XAAACE30SL40C) +# AAC-LC encoder middleware library for Linux (RTM0AC0000AEAACMZ1SL40C) +#DISTRO_FEATURES_append = " aaclcenc_lib" +#DISTRO_FEATURES_append = " aaclcenc_mdw" + +# OMX Dolby(R) Digital decoder library for Linux (RTM0AC0000XADD5D30SL40C), +# Dolby(R) Digital decoder middleware library for Linux (RTM0AC0000ADDD5MZ1SL40C) +#DISTRO_FEATURES_append = " dddec_lib" +#DISTRO_FEATURES_append = " dddec_mdw" + +# CMS Basic Color Management Middleware for Linux (RTM0AC0000JRCMBCV0SL40C) +#DISTRO_FEATURES_append = " cmsbcm" + +# CMS CMM3 Backlight Control Middleware for Linux (RTM0AC0000JRCMBLC0SL40C) +#DISTRO_FEATURES_append = " cmsblc" + +# CMS VSP2 Dynamic Gamma Correction Middleware for Linux (RTM0AC0000JRCMDGV0SL40C) +#DISTRO_FEATURES_append = " cmsdgc" + +# ISDB-T DTV Software Package for Linux (RTM0RC0000TE020000SL40C) +#DISTRO_FEATURES_append = " dtv" + +# DVD Core-Middleware for Linux (RTM0RC0000XDVDC301SL40C) +#DISTRO_FEATURES_append = " dvd" + +# ADSP Driver for Linux (RCG3AHPDL4001ZDO) +# ADSP Interface for Linux (RCG3AHIFL4001ZDP) +# ADSP Framework (RCG3AHFWN0101ZDP) +#DISTRO_FEATURES_append = " adsp" + +# AVB Software Package for Linux +#DISTRO_FEATURES_append = " avb" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" + +# Evaluation packages +#DISTRO_FEATURES_append = " use_eva_pkg" + +# Configuration for ivi-shell and ivi-extension +#DISTRO_FEATURES_append = " ivi-shell" diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/bblayers.conf new file mode 100644 index 0000000..3b2c068 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/bblayers.conf @@ -0,0 +1,15 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + ${TOPDIR}/../meta-linaro/meta-optee \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local-wayland.conf new file mode 100644 index 0000000..15623f5 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local-wayland.conf @@ -0,0 +1,262 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "h3ulcb" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# for Wayland/Weston weston-laucher +DISTRO_FEATURES_append = " pam" + +# Mask the wayland related to GFX +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Mask the gstreamer recipe for MMP +BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer" + +# Add for gstreamer plugins ugly +LICENSE_FLAGS_WHITELIST = "commercial" diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local.conf new file mode 100644 index 0000000..cf312b3 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local.conf @@ -0,0 +1,253 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "h3ulcb" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Mask graphic Pkgs +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/bblayers.conf new file mode 100644 index 0000000..96ff8ad --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/bblayers.conf @@ -0,0 +1,16 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \ + ${TOPDIR}/../meta-linaro/meta-optee \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local-wayland.conf new file mode 100644 index 0000000..9854c3f --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local-wayland.conf @@ -0,0 +1,269 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "m3ulcb" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.3" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# for Wayland/Weston weston-laucher +DISTRO_FEATURES_append = " pam" + +# Mask the wayland related to GFX +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Mask the gstreamer recipe for MMP +BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer" + +# Add for gstreamer plugins ugly +LICENSE_FLAGS_WHITELIST = "commercial" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local.conf new file mode 100644 index 0000000..0f6106e --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local.conf @@ -0,0 +1,260 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "m3ulcb" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.3" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Mask graphic Pkgs +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/bblayers.conf new file mode 100644 index 0000000..96ff8ad --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/bblayers.conf @@ -0,0 +1,16 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \ + ${TOPDIR}/../meta-linaro/meta-optee \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/local-wayland.conf new file mode 100644 index 0000000..e46c769 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/local-wayland.conf @@ -0,0 +1,281 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "m3ulcb" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.3" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Enable Gfx Pkgs +MACHINE_FEATURES_append = " gsx" +MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2" + +# for Wayland/Weston +DISTRO_FEATURES_append = " pam" +PREFERRED_PROVIDER_virtual/libgles1 = "" +PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" +PREFERRED_PROVIDER_virtual/egl = "libegl" +PREFERRED_PROVIDER_virtual/libgl = "" +PREFERRED_PROVIDER_virtual/mesa = "" +PREFERRED_PROVIDER_libgbm = "libgbm" +PREFERRED_PROVIDER_libgbm-dev = "libgbm" +BBMASK .= "|mesa-gl" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Mask the gstreamer recipe for MMP +BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer" + +# Add for gstreamer plugins ugly +LICENSE_FLAGS_WHITELIST = "commercial" + +# Fix the Warning of gstreamer plugins +RDEPENDS_gstreamer1.0-plugins-bad = "libwayland-egl" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/bblayers.conf new file mode 100644 index 0000000..96ff8ad --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/bblayers.conf @@ -0,0 +1,16 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \ + ${TOPDIR}/../meta-linaro/meta-optee \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/local-wayland.conf new file mode 100644 index 0000000..9e039bd --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/local-wayland.conf @@ -0,0 +1,373 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "m3ulcb" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.3" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Enable Gfx Pkgs +MACHINE_FEATURES_append = " gsx" +MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2" + +# for Wayland/Weston +DISTRO_FEATURES_append = " pam" +PREFERRED_PROVIDER_virtual/libgles1 = "" +PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" +PREFERRED_PROVIDER_virtual/egl = "libegl" +PREFERRED_PROVIDER_virtual/libgl = "" +PREFERRED_PROVIDER_virtual/mesa = "" +PREFERRED_PROVIDER_libgbm = "libgbm" +PREFERRED_PROVIDER_libgbm-dev = "libgbm" +BBMASK .= "|mesa-gl" + +# Enable Multimedia features +MACHINE_FEATURES_append = " multimedia" + +# for gstreamer omx plugins +LICENSE_FLAGS_WHITELIST = "commercial" +# for mmp test program +DISTRO_FEATURES_append = " mm-test" + +# for weston v4l2 renderer +#DISTRO_FEATURES_append = " v4l2-renderer" + +# OMX H263 decoder library for Linux (RTM0AC0000XV263D30SL40C) +#DISTRO_FEATURES_append = " h263dec_lib" + +# OMX H264 decoder library for Linux (RTM0AC0000XV264D30SL40C) +DISTRO_FEATURES_append = " h264dec_lib" + +# OMX H264 encoder library for Linux (RTM0AC0000XV264E30SL40C) +#DISTRO_FEATURES_append = " h264enc_lib" + +# OMX H265 decoder library for Linux (RTM0AC0000XV265D30SL40C) +#DISTRO_FEATURES_append = " h265dec_lib" + +# OMX MPEG2 decoder library for Linux (RTM0AC0000XVM2VD30SL40C) +#DISTRO_FEATURES_append = " mpeg2dec_lib" + +# OMX Media Component MPEG4 Decoder Library for Linux (RTM0AC0000XVM4VD30SL40C) +#DISTRO_FEATURES_append = " mpeg4dec_lib" + +# OMX Media Component VC-1 Decoder Library for Linux (RTM0AC0000XVVC1D30SL40C) +#DISTRO_FEATURES_append = " vc1dec_lib" + +# OMX Media Component DivXD Decoder Library for Linux (RTM0AC0000XVDVXD30SL40C) +#DISTRO_FEATURES_append = " divxdec_lib" + +# OMX Media Component RealVideo Decoder Library for Linux (RTM0AC0000XVRLVD30SL40C) +#DISTRO_FEATURES_append = " rvdec_lib" + +# OMX Media Component ALAC Decoder Library for Linux (RTM0AC0000XAALAD30SL40C) +#DISTRO_FEATURES_append = " alacdec_lib" + +# OMX Media Component FLAC Decoder Library for Linux (RTM0AC0000XAFLAD30SL40C) +#DISTRO_FEATURES_append = " flacdec_lib" + +# OMX AAC-LC decoder library for Linux (RTM0AC0000XAAACD30SL40C), +# AAC-LC 2ch decoder middleware library for Linux (RTM0AC0000ADAACMZ1SL40C) +DISTRO_FEATURES_append = " aaclcdec_lib" +DISTRO_FEATURES_append = " aaclcdec_mdw" + +# OMX aacPlus V2 decoder library for Linux (RTM0AC0000XAAAPD30SL40C), +# aacPlus V2 decoder middleware library for Linux (RTM0AC0000ADAAPMZ1SL40C) +#DISTRO_FEATURES_append = " aacpv2dec_lib" +#DISTRO_FEATURES_append = " aacpv2dec_mdw" + +# OMX MP3 decoder library for Linux (RTM0AC0000XAMP3D30SL40C), +# MP3 decoder middleware library for Linux (RTM0AC0000ADMP3MZ1SL40C) +#DISTRO_FEATURES_append = " mp3dec_lib" +#DISTRO_FEATURES_append = " mp3dec_mdw" + +# OMX WMA decoder library for Linux (RTM0AC0000XAWMAD30SL40C), +# WMA decoder middleware library for Linux (RTM0AC0000ADWMAMZ1SL40C) +#DISTRO_FEATURES_append = " wmadec_lib" +#DISTRO_FEATURES_append = " wmadec_mdw" + +# OMX AAC-LC encoder library for Linux (RTM0AC0000XAAACE30SL40C) +# AAC-LC encoder middleware library for Linux (RTM0AC0000AEAACMZ1SL40C) +#DISTRO_FEATURES_append = " aaclcenc_lib" +#DISTRO_FEATURES_append = " aaclcenc_mdw" + +# OMX Dolby(R) Digital decoder library for Linux (RTM0AC0000XADD5D30SL40C), +# Dolby(R) Digital decoder middleware library for Linux (RTM0AC0000ADDD5MZ1SL40C) +#DISTRO_FEATURES_append = " dddec_lib" +#DISTRO_FEATURES_append = " dddec_mdw" + +# CMS Basic Color Management Middleware for Linux (RTM0AC0000JRCMBCV0SL40C) +#DISTRO_FEATURES_append = " cmsbcm" + +# CMS CMM3 Backlight Control Middleware for Linux (RTM0AC0000JRCMBLC0SL40C) +#DISTRO_FEATURES_append = " cmsblc" + +# CMS VSP2 Dynamic Gamma Correction Middleware for Linux (RTM0AC0000JRCMDGV0SL40C) +#DISTRO_FEATURES_append = " cmsdgc" + +# ISDB-T DTV Software Package for Linux (RTM0RC0000TE020000SL40C) +#DISTRO_FEATURES_append = " dtv" + +# DVD Core-Middleware for Linux (RTM0RC0000XDVDC301SL40C) +#DISTRO_FEATURES_append = " dvd" + +# ADSP Driver for Linux (RCG3AHPDL4001ZDO) +# ADSP Interface for Linux (RCG3AHIFL4001ZDP) +# ADSP Framework (RCG3AHFWN0101ZDP) +#DISTRO_FEATURES_append = " adsp" + +# AVB Software Package for Linux +#DISTRO_FEATURES_append = " avb" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" + +# Evaluation packages +#DISTRO_FEATURES_append = " use_eva_pkg" + +# Configuration for ivi-shell and ivi-extension +#DISTRO_FEATURES_append = " ivi-shell" diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/bblayers.conf new file mode 100644 index 0000000..3b2c068 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/bblayers.conf @@ -0,0 +1,15 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + ${TOPDIR}/../meta-linaro/meta-optee \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local-wayland.conf new file mode 100644 index 0000000..1944e76 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local-wayland.conf @@ -0,0 +1,262 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "m3ulcb" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# for Wayland/Weston weston-laucher +DISTRO_FEATURES_append = " pam" + +# Mask graphic Pkgs +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Mask the gstreamer recipe for MMP +BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer" + +# Add for gstreamer plugins ugly +LICENSE_FLAGS_WHITELIST = "commercial" diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local.conf new file mode 100644 index 0000000..f067c3e --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local.conf @@ -0,0 +1,253 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "m3ulcb" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Mask graphic Pkgs +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/bblayers.conf new file mode 100644 index 0000000..96ff8ad --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/bblayers.conf @@ -0,0 +1,16 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \ + ${TOPDIR}/../meta-linaro/meta-optee \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local-wayland.conf new file mode 100644 index 0000000..af4d33c --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local-wayland.conf @@ -0,0 +1,274 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "salvator-x" + +# This sets the SoC +# H3: r8a7795, M3: r8a7796 +SOC_FAMILY = "r8a7795" +#SOC_FAMILY = "r8a7796" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.3" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# for Wayland/Weston weston-laucher +DISTRO_FEATURES_append = " pam" + +# Mask the wayland related to GFX +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Mask the gstreamer recipe for MMP +BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer" + +# Add for gstreamer plugins ugly +LICENSE_FLAGS_WHITELIST = "commercial" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local.conf new file mode 100644 index 0000000..0350e50 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local.conf @@ -0,0 +1,265 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "salvator-x" + +# This sets the SoC +# H3: r8a7795, M3: r8a7796 +SOC_FAMILY = "r8a7795" +#SOC_FAMILY = "r8a7796" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.3" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Mask graphic Pkgs +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/bblayers.conf new file mode 100644 index 0000000..96ff8ad --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/bblayers.conf @@ -0,0 +1,16 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \ + ${TOPDIR}/../meta-linaro/meta-optee \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/local-wayland.conf new file mode 100644 index 0000000..9968d18 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/local-wayland.conf @@ -0,0 +1,286 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "salvator-x" + +# This sets the SoC +# H3: r8a7795, M3: r8a7796 +SOC_FAMILY = "r8a7795" +#SOC_FAMILY = "r8a7796" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.3" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Enable Gfx Pkgs +MACHINE_FEATURES_append = " gsx" +MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2" + +# for Wayland/Weston +DISTRO_FEATURES_append = " pam" +PREFERRED_PROVIDER_virtual/libgles1 = "" +PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" +PREFERRED_PROVIDER_virtual/egl = "libegl" +PREFERRED_PROVIDER_virtual/libgl = "" +PREFERRED_PROVIDER_virtual/mesa = "" +PREFERRED_PROVIDER_libgbm = "libgbm" +PREFERRED_PROVIDER_libgbm-dev = "libgbm" +BBMASK .= "|mesa-gl" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Mask the gstreamer recipe for MMP +BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer" + +# Add for gstreamer plugins ugly +LICENSE_FLAGS_WHITELIST = "commercial" + +# Fix the Warning of gstreamer plugins +RDEPENDS_gstreamer1.0-plugins-bad = "libwayland-egl" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/bblayers.conf new file mode 100644 index 0000000..96ff8ad --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/bblayers.conf @@ -0,0 +1,16 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \ + ${TOPDIR}/../meta-linaro/meta-optee \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/local-wayland.conf new file mode 100644 index 0000000..7a9817d --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/local-wayland.conf @@ -0,0 +1,378 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "salvator-x" + +# This sets the SoC +# H3: r8a7795, M3: r8a7796 +SOC_FAMILY = "r8a7795" +#SOC_FAMILY = "r8a7796" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.3" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Enable Gfx Pkgs +MACHINE_FEATURES_append = " gsx" +MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2" + +# for Wayland/Weston +DISTRO_FEATURES_append = " pam" +PREFERRED_PROVIDER_virtual/libgles1 = "" +PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" +PREFERRED_PROVIDER_virtual/egl = "libegl" +PREFERRED_PROVIDER_virtual/libgl = "" +PREFERRED_PROVIDER_virtual/mesa = "" +PREFERRED_PROVIDER_libgbm = "libgbm" +PREFERRED_PROVIDER_libgbm-dev = "libgbm" +BBMASK .= "|mesa-gl" + +# Enable Multimedia features +MACHINE_FEATURES_append = " multimedia" + +# for gstreamer omx plugins +LICENSE_FLAGS_WHITELIST = "commercial" +# for mmp test program +DISTRO_FEATURES_append = " mm-test" + +# for weston v4l2 renderer +#DISTRO_FEATURES_append = " v4l2-renderer" + +# OMX H263 decoder library for Linux (RTM0AC0000XV263D30SL40C) +#DISTRO_FEATURES_append = " h263dec_lib" + +# OMX H264 decoder library for Linux (RTM0AC0000XV264D30SL40C) +DISTRO_FEATURES_append = " h264dec_lib" + +# OMX H264 encoder library for Linux (RTM0AC0000XV264E30SL40C) +#DISTRO_FEATURES_append = " h264enc_lib" + +# OMX H265 decoder library for Linux (RTM0AC0000XV265D30SL40C) +#DISTRO_FEATURES_append = " h265dec_lib" + +# OMX MPEG2 decoder library for Linux (RTM0AC0000XVM2VD30SL40C) +#DISTRO_FEATURES_append = " mpeg2dec_lib" + +# OMX Media Component MPEG4 Decoder Library for Linux (RTM0AC0000XVM4VD30SL40C) +#DISTRO_FEATURES_append = " mpeg4dec_lib" + +# OMX Media Component VC-1 Decoder Library for Linux (RTM0AC0000XVVC1D30SL40C) +#DISTRO_FEATURES_append = " vc1dec_lib" + +# OMX Media Component DivXD Decoder Library for Linux (RTM0AC0000XVDVXD30SL40C) +#DISTRO_FEATURES_append = " divxdec_lib" + +# OMX Media Component RealVideo Decoder Library for Linux (RTM0AC0000XVRLVD30SL40C) +#DISTRO_FEATURES_append = " rvdec_lib" + +# OMX Media Component ALAC Decoder Library for Linux (RTM0AC0000XAALAD30SL40C) +#DISTRO_FEATURES_append = " alacdec_lib" + +# OMX Media Component FLAC Decoder Library for Linux (RTM0AC0000XAFLAD30SL40C) +#DISTRO_FEATURES_append = " flacdec_lib" + +# OMX AAC-LC decoder library for Linux (RTM0AC0000XAAACD30SL40C), +# AAC-LC 2ch decoder middleware library for Linux (RTM0AC0000ADAACMZ1SL40C) +DISTRO_FEATURES_append = " aaclcdec_lib" +DISTRO_FEATURES_append = " aaclcdec_mdw" + +# OMX aacPlus V2 decoder library for Linux (RTM0AC0000XAAAPD30SL40C), +# aacPlus V2 decoder middleware library for Linux (RTM0AC0000ADAAPMZ1SL40C) +#DISTRO_FEATURES_append = " aacpv2dec_lib" +#DISTRO_FEATURES_append = " aacpv2dec_mdw" + +# OMX MP3 decoder library for Linux (RTM0AC0000XAMP3D30SL40C), +# MP3 decoder middleware library for Linux (RTM0AC0000ADMP3MZ1SL40C) +#DISTRO_FEATURES_append = " mp3dec_lib" +#DISTRO_FEATURES_append = " mp3dec_mdw" + +# OMX WMA decoder library for Linux (RTM0AC0000XAWMAD30SL40C), +# WMA decoder middleware library for Linux (RTM0AC0000ADWMAMZ1SL40C) +#DISTRO_FEATURES_append = " wmadec_lib" +#DISTRO_FEATURES_append = " wmadec_mdw" + +# OMX AAC-LC encoder library for Linux (RTM0AC0000XAAACE30SL40C) +# AAC-LC encoder middleware library for Linux (RTM0AC0000AEAACMZ1SL40C) +#DISTRO_FEATURES_append = " aaclcenc_lib" +#DISTRO_FEATURES_append = " aaclcenc_mdw" + +# OMX Dolby(R) Digital decoder library for Linux (RTM0AC0000XADD5D30SL40C), +# Dolby(R) Digital decoder middleware library for Linux (RTM0AC0000ADDD5MZ1SL40C) +#DISTRO_FEATURES_append = " dddec_lib" +#DISTRO_FEATURES_append = " dddec_mdw" + +# CMS Basic Color Management Middleware for Linux (RTM0AC0000JRCMBCV0SL40C) +#DISTRO_FEATURES_append = " cmsbcm" + +# CMS CMM3 Backlight Control Middleware for Linux (RTM0AC0000JRCMBLC0SL40C) +#DISTRO_FEATURES_append = " cmsblc" + +# CMS VSP2 Dynamic Gamma Correction Middleware for Linux (RTM0AC0000JRCMDGV0SL40C) +#DISTRO_FEATURES_append = " cmsdgc" + +# ISDB-T DTV Software Package for Linux (RTM0RC0000TE020000SL40C) +#DISTRO_FEATURES_append = " dtv" + +# DVD Core-Middleware for Linux (RTM0RC0000XDVDC301SL40C) +#DISTRO_FEATURES_append = " dvd" + +# ADSP Driver for Linux (RCG3AHPDL4001ZDO) +# ADSP Interface for Linux (RCG3AHIFL4001ZDP) +# ADSP Framework (RCG3AHFWN0101ZDP) +#DISTRO_FEATURES_append = " adsp" + +# AVB Software Package for Linux +#DISTRO_FEATURES_append = " avb" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" + +# Evaluation packages +#DISTRO_FEATURES_append = " use_eva_pkg" + +# Configuration for ivi-shell and ivi-extension +#DISTRO_FEATURES_append = " ivi-shell" diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/bblayers.conf new file mode 100644 index 0000000..3b2c068 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/bblayers.conf @@ -0,0 +1,15 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + ${TOPDIR}/../meta-linaro/meta-optee \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-wayland.conf new file mode 100644 index 0000000..1520bdb --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-wayland.conf @@ -0,0 +1,267 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "salvator-x" + +# This sets the SoC +# H3: r8a7795, M3: r8a7796 +SOC_FAMILY = "r8a7795" +#SOC_FAMILY = "r8a7796" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# for Wayland/Weston weston-laucher +DISTRO_FEATURES_append = " pam" + +# Mask the wayland related to GFX +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Mask the gstreamer recipe for MMP +BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer" + +# Add for gstreamer plugins ugly +LICENSE_FLAGS_WHITELIST = "commercial" diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local.conf new file mode 100644 index 0000000..61f5096 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local.conf @@ -0,0 +1,258 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "salvator-x" + +# This sets the SoC +# H3: r8a7795, M3: r8a7796 +SOC_FAMILY = "r8a7795" +#SOC_FAMILY = "r8a7796" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Mask graphic Pkgs +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" diff --git a/meta-rcar-gen3/docs/sample/copyscript/copy_evaproprietary_softwares.sh b/meta-rcar-gen3/docs/sample/copyscript/copy_evaproprietary_softwares.sh new file mode 100755 index 0000000..6096c5b --- /dev/null +++ b/meta-rcar-gen3/docs/sample/copyscript/copy_evaproprietary_softwares.sh @@ -0,0 +1,1348 @@ +#!/bin/sh + +# Copyright (C) Renesas Electronics Corporation 2016 All rights reserved. + +usage() +{ +cat << EOF + usage: `basename $0` [-f] [-d] source-directory + -f: fource copy. ignore md5check + -d: debug mode + + Ex) + `basename $0` -f my_package_dir +EOF +} + +##### MD5 list ##### +. `dirname $0`/md5list.txt + +##### Library List ##### +# Audio Library +# Please add omx audio library to "_audio_list" +# Don't use space in xxx_name. +# audio_list="<software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name>" +_audio_list="AAC-LC_decoder_lib,EVARTM0AC0000XAAACD30SL40C,RTM0AC0000XAAACD30SL40C.tar.gz \ + aacPlusV2_decoder_lib,EVARTM0AC0000XAAAPD30SL40C,RTM0AC0000XAAAPD30SL40C.tar.gz \ + MP3_decoder_lib,EVARTM0AC0000XAMP3D30SL40C,RTM0AC0000XAMP3D30SL40C.tar.gz \ + WMA_decoder_lib,EVARTM0AC0000XAWMAD30SL40C,RTM0AC0000XAWMAD30SL40C.tar.gz \ + AAC-LC_encoder_lib,EVARTM0AC0000XAAACE30SL40C,RTM0AC0000XAAACE30SL40C.tar.gz \ + ALAC_decoder_lib,EVARTM0AC0000XAALAD30SL40C,RTM0AC0000XAALAD30SL40C.tar.gz \ + FLAC_decoder_lib,EVARTM0AC0000XAFLAD30SL40C,RTM0AC0000XAFLAD30SL40C.tar.gz \ + Dolby_decoder_lib,EVARTM0AC0000XADD5D30SL40C,RTM0AC0000XADD5D30SL40C.tar.gz" + +# Audio M/W Library +# Please add omx audio library to "_audio_mw_list" +# Don't use space in xxx_name. +# audio_mw_list="<software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name>" +_audio_mw_list="AAC-LC_decoder_M/W,EVARTM0AC0000ADAACMZ1SL40C,RTM0AC0000ADAACMZ1SL40C.tar.gz \ + aacPlusV2_decoder_M/W,EVARTM0AC0000ADAAPMZ1SL40C,RTM0AC0000ADAAPMZ1SL40C.tar.gz \ + MP3_decoder_M/W,EVARTM0AC0000ADMP3MZ1SL40C,RTM0AC0000ADMP3MZ1SL40C.tar.gz \ + WMA_decoder_M/W,EVARTM0AC0000ADWMAMZ1SL40C,RTM0AC0000ADWMAMZ1SL40C.tar.gz \ + AAC-LC_encoder_M/W,EVARTM0AC0000AEAACMZ1SL40C,RTM0AC0000AEAACMZ1SL40C.tar.gz \ + DDD_decoder_M/W,EVARTM0AC0000ADDD5MZ1SL40C,RTM0AC0000ADDD5MZ1SL40C.tar.gz" + +# Video Decoder Library +# Please add omx video decoder library to "_video_dec_list" +# Don't use space in xxx_name. +# video_dec_list="<software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name>" +_video_dec_list="H263_decoder,EVARTM0AC0000XV263D30SL40C,EVARTM0AC0000XV263D30SL40C.tar.bz2 \ + H264_decoder,EVARTM0AC0000XV264D30SL40C,EVARTM0AC0000XV264D30SL40C.tar.bz2 \ + H265_decoder,EVARTM0AC0000XV265D30SL40C,EVARTM0AC0000XV265D30SL40C.tar.bz2 \ + MPEG2_decoder,EVARTM0AC0000XVM2VD30SL40C,EVARTM0AC0000XVM2VD30SL40C.tar.bz2 \ + MPEG4_decoder,EVARTM0AC0000XVM4VD30SL40C,EVARTM0AC0000XVM4VD30SL40C.tar.bz2 \ + VC1_decoder,EVARTM0AC0000XVVC1D30SL40C,EVARTM0AC0000XVVC1D30SL40C.tar.bz2 \ + DivX_decoder,EVARTM0AC0000XVDVXD30SL40C,EVARTM0AC0000XVDVXD30SL40C.tar.bz2 \ + RealVideo_decoder,EVARTM0AC0000XVRLVD30SL40C,EVARTM0AC0000XVRLVD30SL40C.tar.bz2" + +# Video Encoder Library +# Please add omx video encoder library to "_video_enc_list" +# Don't use space in xxx_name. +# video_enc_list="<software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name>" +_video_enc_list="H264_encoder,EVARTM0AC0000XV264E30SL40C,EVARTM0AC0000XV264E30SL40C.tar.bz2" + +# Common library packages +# Don't use space in xxx_name. +# XXX_list="<software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name>" +_omx_common_list="omx_common_lib,EVARTM0AC0000XCMCTL30SL40C,EVARTM0AC0000XCMCTL30SL40C.tar.bz2" +_uvcs_list="uvcs_lib,RCG3VUDRL4001ZDO,RCG3VUDRL4001ZDO.tar.bz2" +_video_enc_common_list="video_enc_common,EVARTM0AC0000XVCMNE30SL40C,EVARTM0AC0000XVCMNE30SL40C.tar.bz2" +_video_dec_common_list="video_dec_common,EVARTM0AC0000XVCMND30SL40C,EVARTM0AC0000XVCMND30SL40C.tar.bz2" +_audio_common_list="audio_common,EVARTM0AC0000XACMND30SL40C,RTM0AC0000XACMND30SL40C.tar.gz" + + +# DTV Library +# Please add DTV library to "_dtv_list" +# Don't use space in xxx_name. +# dtv_xx_list="<software_name>,<package_name>,<copy_file_name>,<MD5_name> \ +# <software_name>,<package_name>,<copy_file_name>,<MD5_name> \ +# <software_name>,<package_name>,<copy_file_name>,<MD5_name>" +_dtv_km_list="dtv_km,RCG3T001L4001ZDO,Software.tar.gz" +_dtv_um_list="dtv_lib,RTM0RC0000TE020000SL40C,Software.tar.gz,RTM0RC0000TE020000SL40C1 \ + dtv_userfunc,RTM0RC0000TE020000SL40C,../Reference/Reference.tar.gz,RTM0RC0000TE020000SL40C2" + +# DVD Library +# Please add DVD library to "_dvd_list" +# Don't use space in xxx_name. +# dvd_list="<software_name>,<package_name>,<copy_file_name>,<MD5_name> \ +# <software_name>,<package_name>,<copy_file_name>,<MD5_name> \ +# <software_name>,<package_name>,<copy_file_name>,<MD5_name>" +_dvd_list="dvd_lib,RTM0RC0000XDVDC301SL40C,Software.tar.gz" + +# CMS Library +# Please add CMS library to "_cms_list" +# Don't use space in xxx_name. +# cms_list="<software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name>" +_cms_list="bcm,RTM0AC0000JRCMBCV0SL40C,RTM0AC0000JRCMBCV0SL40C.tar.gz \ + blc,RTM0AC0000JRCMBLC0SL40C,RTM0AC0000JRCMBLC0SL40C.tar.gz \ + dgc,RTM0AC0000JRCMDGV0SL40C,RTM0AC0000JRCMDGV0SL40C.tar.gz" + +# ADSP +# Please add ADSP to "_adsp_list" +# Don't use space in xxx_name. +# adsp_xx_list="<software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name>" +_adsp_um_list="adsp_fw,RCG3AHFWN0101ZDP,RCG3AHFWN0101ZDP.tar.gz \ + adsp_if,RCG3AHIFL4001ZDP,RCG3AHIFL4001ZDP.tar.gz" +_adsp_km_list="adsp_driver,RCG3AHPDL4001ZDO,RCG3AHPDL4001ZDO.tar.gz" + +# GFX +# Please add GFX to "_gfx_list" +# Don't use space in xxx_name. +# gfx_list="<package_name(user)>,<copy_file_name(user)>,<package_name(kernel)>,<copy_file_name(kernel)> \ +# <package_name(user)>,<copy_file_name(user)>,<package_name(kernel)>,<copy_file_name(kernel)> \ +# <package_name(user)>,<copy_file_name(user)>,<package_name(kernel)>,<copy_file_name(kernel)>" +_gfx_list="EVARTM0RC7795GLTG0001SL40C,EVA_r8a7795_linux_gsx_binaries_gles3.tar.bz2,RCH3G001L4001ZDO,GSX_KM_H3.tar.bz2 \ + EVARTM0RC7796GLTG0001SL40C,EVA_r8a7796_linux_gsx_binaries_gles3.tar.bz2,RCM3G001L4001ZDO,GSX_KM_M3.tar.bz2 \ + INFRTM0RC7795GLTG0001SL40C,INF_r8a7795_linux_gsx_binaries_gles3.tar.bz2,RCH3G001L4001ZDO,GSX_KM_H3.tar.bz2 \ + INFRTM0RC7796GLTG0001SL40C,INF_r8a7796_linux_gsx_binaries_gles3.tar.bz2,RCM3G001L4001ZDO,GSX_KM_M3.tar.bz2" + +# ICCOM +# Please add ICCOM to "_iccom_list" +# Don't use space in xxx_name. +# iccom_xx_list="<software_name>,<package_name>,<copy_file_name>,<MD5_name> \ +# <software_name>,<package_name>,<copy_file_name>,<MD5_name> \ +# <software_name>,<package_name>,<copy_file_name>,<MD5_name>" +_iccom_km_list="iccom_mfis,RCG3ZLIDL4001ZNO,iccom-mfis.tar.bz2,RCG3ZLIDL4001ZNO1 \ + iccom_sample,RCG3ZLIDL4001ZNO,iccom-hwspinlock-sample.tar.bz2,RCG3ZLIDL4001ZNO2" +_iccom_um_list="iccom_lib,RCG3ZLILL4001ZNO,libiccom.tar.bz2,RCG3ZLILL4001ZNO" + +# Crypto Packgae list +# Please add crypto (zip) package name to "_crypto_pkg_list" +# Don't use space in xxx_name. +# crypto_pkg_list="<packgae name> <packgae name> <packgae name>" +_crypto_pkg_list="RTM0AC0000ADDD5MZ1SL40C" + +##### static value +_MODE_ZIP=1 +_MODE_TAR=2 +_MODE_CRYPTO_ZIP=3 +_GFX_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-gles/kernel-module-gles" +_GFX_UM_INST_DIR="../meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module" +_UVCS_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-uvcs/kernel-module-uvcs-drv" +_OMX_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/omx-module/omx-user-module" +_DTV_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-dtv/files" +_DTV_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/dtv-module/dtv-user-module" +_DVD_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/dvd-module/dvd-user-module" +_CMS_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/cms-module/cms-user-module" +_ADSP_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-adsp/xtensa-hifi" +_ADSP_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/adsp-module/files" +_ICCOM_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-iccom/files" +_ICCOM_UM_INST_DIR="../meta-rcar-gen3/recipes-connectivity/iccom-module/files" + +##### common function + +# $1: search file name +# $2: search directory +# return global variable +# _find_filename: find filename +# _extract_mode: _MODE_ZIP or _MODE_TAR +func_cmn_find_file() +{ +# echo "$1" +# echo "$2" + if [ -z "$1" ]; then + func_error "ERROR: func_cmn_find_file: empty filename" + fi + + if [ -z "$2" ]; then + _search_dir=${_src_full} + else + _search_dir=$2 + fi + + # search zip file +# zip_count=`find ${_search_dir} -maxdepth 1 -name "$1*.zip" | wc -l` + zip_count=`ls ${_search_dir}/$1*.zip 2>/dev/null | wc -l` + + # search tar file +# tar_count=`find ${_search_dir} -maxdepth 1 -name "$1*.tar.*" | wc -l` + tar_count=`ls ${_search_dir}/$1*.tar.* 2>/dev/null | wc -l` + + # duplicate file check + if [ 1 -lt `expr $zip_count + $tar_count` ]; then + echo "file1_zip = $zip_count" + echo "file1_tar = $tar_count" + func_error "ERROR: $1: too many files" + fi + + crypto_zip_count=0 + for i in ${_crypto_pkg_list} + do + if [ $1 = $i ]; then + crypto_zip_count=$zip_count + zip_count=0 + fi + done + + # set result + if [ 1 = $zip_count ]; then + _find_filename=$(ls ${_search_dir}/$1*.zip) + _extract_mode=${_MODE_ZIP} + elif [ 1 = $tar_count ]; then + _find_filename=$(ls ${_search_dir}/$1*.tar.*) + _extract_mode=${_MODE_TAR} + elif [ 1 = $crypto_zip_count ]; then + _find_filename=$(ls ${_search_dir}/$1*.zip) + _extract_mode=${_MODE_CRYPTO_ZIP} + else + _find_filename="" + fi +} + +# $1: Mode +# $2: archive file name +func_cmn_extract_archive() +{ + case $1 in + $_MODE_ZIP) +# echo "Zip mode" + unzip -oq $2 + ;; + $_MODE_TAR) +# echo "Tar mode" + tar xf $2 + ;; + $_MODE_CRYPTO_ZIP) +# echo "Crypto Zip mode" + unzip -oq $2 + top_dir=$(basename $2) + top_dir=${top_dir%.*} + cd ${top_dir} + unzip -oq *.zip + if [ $? -gt 0 ]; then + func_error "ERROR: FAILED ZIP PASSWORD" + fi + cd ${TMPWORK} + ;; + *) + func_error "ERROR: func_cmn_extract_archive: mode error." + exit 1 + ;; + esac +} + +# $1: set target filename. +# $2: set MD5 expectation value. +func_cmn_md5_check() +{ + _md5_func_param_filename=$1 + _md5_func_param_expectation=$2 + if [ ! -e ${_md5_func_param_filename} ]; then + func_error "func_cmn_md5_check : ERROR ${_md5_func_param_filename} not found." + fi + + _calc_md5=$(md5sum ${_md5_func_param_filename} | cut -d " " -f1) + + if [ -n "${_no_md5check}" ] || [ -z ${_md5_func_param_expectation} ]; then + echo "Skip MD5 : `basename ${_md5_func_param_filename}`" + return + fi + + if [ -n "${_debug}" ]; then + echo "MD5 target file = ${_md5_func_param_filename}" + echo "calc_md5 = ${_calc_md5}" + echo "expect_value = ${_md5_func_param_expectation}" + fi + + if [ ${_calc_md5} = ${_md5_func_param_expectation} ]; then + echo "MD5 OK : `basename ${_md5_func_param_filename}`" + else + echo "calc_md5 = ${_calc_md5}" + echo "expect_value = ${_md5_func_param_expectation}" + func_error "MD5 ERROR : ${_md5_func_param_filename}" + fi +} + +##### Error function +# $1: error message +func_error() +{ + echo "$1" + # cleanup temp directory. + func_clean_tempdir + exit 1 +} + +##### cleanup temp directory +func_clean_tempdir() +{ + echo "cleanup temp directory" + rm -rf ${TMPWORK} +} + +##### Template function for Single package + +# $1: package name +# $2: search target filename +# $3: search directory (full path) +# return +# _find_filename : the found file (full path) +# _extract_top_dir_name +func_search_file_in_package() +{ + # search package file + func_cmn_find_file $1 $3 + if [ -n "${_debug}" ]; then + echo "" + echo "FileName = ${_find_filename}" + echo "Mode = ${_extract_mode}" + fi + + if [ -z "${_find_filename}" ]; then + return + fi + + # extract + func_cmn_extract_archive ${_extract_mode} "${_find_filename}" + + # Get directory name + # {PATH}/Package_Version.tar.gz or XXXX.zip --> Package_Version + top_dir=$(basename ${_find_filename}) + top_dir=${top_dir%.*} + + # search file + num=`find ${top_dir} -name $2 | wc -l` + if [ ${num} -eq 1 ]; then + _find_filename=`find ${top_dir} -name $2` + else + # same filename exists. + _find_filename=`find ${top_dir} -name $2 | grep Software` + fi + + # set mode + if [ `echo ${_find_filename} | grep '\.'zip` ]; then + _extract_mode=${_MODE_ZIP} + else + _extract_mode=${_MODE_TAR} + fi + + # set return value + _extract_top_dir_name=${top_dir} +} + +# $1: package name +# $2: copy filename (md5 target) +# $3: expect MD5 value +# $4: search directory (full path) +# return +# _find_file_name +# _extract_top_dir_name +func_search_and_md5check() +{ + # search package file + func_cmn_find_file $1 $4 + if [ -n "${_debug}" ]; then + echo "" + echo "FileName = ${_find_filename}" + echo "Mode = ${_extract_mode}" + fi + + if [ -z "${_find_filename}" ]; then + return + fi + + # extract + func_cmn_extract_archive ${_extract_mode} "${_find_filename}" + + # MD5 + # Get directory name + # {PATH}/Package_Version.tar.gz or XXXX.zip --> Package_Version + top_dir=$(basename ${_find_filename}) + top_dir=${top_dir%.*} + + # call func_cmn_md5_check +# func_cmn_md5_check "${top_dir}/$1/Software/$2" "$3" + + # set return value + _extract_top_dir_name=${top_dir} +} + +##### Template function for Group package +# $1: group package name +# $2: single package name +# $3: copy filename (md5 target) +# $4: expect MD5 value +# $5: search directory (full path) +# return +# _find_file_name +# _extract_top_dir_name +# +# NOTE) This function support level1 packaging. "grp pkg in grp pkg" dose note support. +func_search_and_md5check_grp() +{ + # search group package @SRCDIR + func_cmn_find_file $1 $5 + if [ -n "${_debug}" ]; then + echo "search group package" + echo "FileName = ${_find_filename}" + echo "Mode = ${_extract_mode}" + echo "" + fi + + if [ -z "${_find_filename}" ]; then + return + fi + + # extract group package @TMPWORK + func_cmn_extract_archive ${_extract_mode} "${_find_filename}" + + cd ${_find_filename} + # check group pachage structure + # <Package name>_<version>/Package_Info.txt + top_dir=$(basename ${_find_filename}) + top_dir=${top_dir%.*} + + if [ ! -e ${top_dir}/Package_Info.txt ]; then + echo "grp package = $1" + echo "single package = $2" + func_error "ERROR: Package_Info.txt not found in Group package." + fi + + # search single package @TMPWORK/TOPDIR/<Group Package name>/ + func_cmn_find_file $2 "${TMPWORK}/${top_dir}/$1" + if [ -n "${_debug}" ]; then + echo "search single package" + echo "FileName = ${_find_filename}" + echo "Mode = ${_extract_mode}" + echo "" + fi + + if [ -z "${_find_filename}" ]; then + return + fi + + # mv <single package> TMPWORK/. + mv ${_find_filename} ${TMPWORK}/. + + # delete group package + rm -rf ${TMPWORK}/${top_dir} + + # call search and md5check @TMPWORK + func_search_and_md5check $2 $3 $4 ${TMPWORK} +} + +##### File search and MD5check for Package list +# $1: package list +# $2: rigid flag (1: true, other: false) +# +# return +# 1: [Success] One or more files were found. +# 0: [Fail] File not found +# +# package list format +# list ="<software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \ +# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \ +# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name>" +# +# Note) Don't use space in xxx_name. +# Note) md5_variable_name is defined in md5list.txt. +# Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO +# It is omissible. The default is "_MD5_<package_name>". +func_list_search_and_md5check () +{ + find_flag=0 + + for i in $1 + do + sw_name=`echo $i | cut -d "," -f 1` + pkg_name=`echo $i | cut -d "," -f 2` + copyfile_name=`echo $i | cut -d "," -f 3` + md5_val=`echo $i | cut -d "," -f 4` + + # <MD5_name> is empty. Default MD5 name is "_MD5_<pkg_name>" + if [ -z "${md5_val}" ]; then + md5_val=`eval echo '$_MD5_'${pkg_name}` + else + md5_val=`eval echo '$_MD5_'${md5_val}` + fi + + if [ -n "${_debug}" ]; then + echo "" + echo "sw_name = $sw_name" + echo "pkg_name = $pkg_name" + echo "copyfile_name = $copyfile_name" + echo "md5_val = $md5_val" + fi + + func_search_and_md5check "${pkg_name}" "${copyfile_name}" "${md5_val}" "${_src_full}" + if [ -z "${_find_filename}" ]; then + echo "${sw_name} not found!" + # rigid flag = TRUE. Not found = ERROR + if [ "X$2" = "X1" ]; then + return 0 + fi + else + find_flag=1 + fi + done + + return ${find_flag} +} + +##### File search and install (without MD5check) for Package list +# +# $1: package list +# $2: install directory +# +# return +# 1: [Success] One or more files were installed. +# 0: [Fail] File not found +# +# package list format +# list ="<software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \ +# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \ +# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name>" +# +# Note) Don't use space in xxx_name. +# Note) md5_variable_name is defined in md5list.txt. +# Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO +# It is omissible. The default is "_MD5_<package_name>". +func_list_search_and_install_wo_md5check() +{ + find_flag=0 + + for i in $1 + do + sw_name=`echo $i | cut -d "," -f 1` + pkg_name=`echo $i | cut -d "," -f 2` + copyfile_name=`echo $i | cut -d "," -f 3` + md5_val=`echo $i | cut -d "," -f 4` + + # <MD5_name> is empty. Default MD5 name is "_MD5_<pkg_name>" + if [ -z "${md5_val}" ]; then + md5_val=`eval echo '$_MD5_'$pkg_name` + else + md5_val=`eval echo '$_MD5_'${md5_val}` + fi + + copyfile_name=$(basename ${copyfile_name}) + + if [ -n "${_debug}" ]; then + echo "" + echo "sw_name = $sw_name" + echo "pkg_name = $pkg_name" + echo "copyfile_name = $copyfile_name" + echo "md5_val = $md5_val" + fi + + # file search + func_search_file_in_package "${pkg_name}" "${copyfile_name}" "${_src_full}" + if [ -z "${_find_filename}" ]; then + echo "${sw_name} not found!" + else + find_flag=1 + + # install + install -d $2 + install -m 0644 ${_find_filename} $2 + echo "Installed $sw_name" + echo " : ${pkg_name}" + fi + done + + return ${find_flag} +} + +##### File search and install for Package list +# +# $1: package list +# $2: install directory +# +# return +# 1: [Success] One or more files were installed. +# 0: [Fail] File not found +# +# package list format +# list ="<software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \ +# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \ +# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name>" +# +# Note) Don't use space in xxx_name. +# Note) md5_variable_name is defined in md5list.txt. +# Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO +# It is omissible. The default is "_MD5_<package_name>". +func_list_search_and_install() +{ + find_flag=0 + + for i in $1 + do + sw_name=`echo $i | cut -d "," -f 1` + pkg_name=`echo $i | cut -d "," -f 2` + copyfile_name=`echo $i | cut -d "," -f 3` + md5_val=`echo $i | cut -d "," -f 4` + + # <MD5_name> is empty. Default MD5 name is "_MD5_<pkg_name>" + if [ -z "${md5_val}" ]; then + md5_val=`eval echo '$_MD5_'$pkg_name` + else + md5_val=`eval echo '$_MD5_'${md5_val}` + fi + + if [ -n "${_debug}" ]; then + echo "" + echo "sw_name = $sw_name" + echo "pkg_name = $pkg_name" + echo "copyfile_name = $copyfile_name" + echo "md5_val = $md5_val" + fi + + # seach & MD5 check + func_search_and_md5check "${pkg_name}" "${copyfile_name}" "${md5_val}" "${_src_full}" + if [ -z "${_find_filename}" ]; then + echo "${sw_name} not found!" + else + find_flag=1 + + # Get directory name + # _find_filename = pkg file (full path). It is not copyfile. + top_dir=$(basename ${_find_filename}) + top_dir=${top_dir%.*} + + # install + install -d $2 + install -m 0644 ${top_dir}/${pkg_name}/Software/${copyfile_name} $2 + echo "Installed $sw_name" + echo " : ${pkg_name}" + fi + done + + return ${find_flag} +} + +##### Package function + +# For 3D graphics packages +func_gfx() +{ + echo "" + echo "Copying for Graphic Packages" + + copy_flag=0 + + for i in ${_gfx_list} + do + user_pkg_name=`echo $i | cut -d "," -f 1` + user_copyfile_name=`echo $i | cut -d "," -f 2` + user_md5_val=`eval echo '$_MD5_'${user_pkg_name}` + kern_pkg_name=`echo $i | cut -d "," -f 3` + kern_copyfile_name=`echo $i | cut -d "," -f 4` + kern_md5_val=`eval echo '$_MD5_'${kern_pkg_name}` + + if [ -n "${_debug}" ]; then + echo "" + echo "user_pkg_name = ${user_pkg_name}" + echo "user_copyfile_name= ${user_copyfile_name}" + echo "user_md5_val = ${user_md5_val}" + echo "kern_pkg_name = ${kern_pkg_name}" + echo "kern_copyfile_name= ${kern_copyfile_name}" + echo "kern_md5_val = ${kern_md5_val}" + fi + + # user module (file1) + func_search_and_md5check "${user_pkg_name}" "${user_copyfile_name}" "${user_md5_val}" "${_src_full}" + + if [ -z "${_find_filename}" ]; then + echo "${user_pkg_name} not found!" + continue + fi + + file1_top_dir=${_extract_top_dir_name} + echo "file1 top : ${file1_top_dir}" + + # kernel module (file2) + func_search_and_md5check "${kern_pkg_name}" "${kern_copyfile_name}" "${kern_md5_val}" "${_src_full}" + + # file1 exist, but file2 not exist + if [ -z "${_find_filename}" ]; then + func_error "ERROR: func_gfx: package file for Graphic is incomplete." + fi + + file2_top_dir=${_extract_top_dir_name} + echo "file2 top : ${file2_top_dir}" + + # Finally copy is performed + copy_flag=1 + install -d ${_GFX_UM_INST_DIR} + install -m 0644 ${file1_top_dir}/${user_pkg_name}/Software/${user_copyfile_name} ${_GFX_UM_INST_DIR}/`echo ${user_copyfile_name} | cut -b 5-200` + install -d ${_GFX_KM_INST_DIR} + install -m 0644 ${file2_top_dir}/${kern_pkg_name}/Software/${kern_copyfile_name} ${_GFX_KM_INST_DIR} + echo "Installed GFX package" + echo " : ${user_pkg_name}" + echo " : ${kern_pkg_name}" + echo "" + done + + if [ ${copy_flag} -eq 0 ]; then + return + fi + + echo "" + echo "Packages for GFX module were found and copied." + echo /=======================================================/ +} + +##### For Multi Media + +# For Audio library copy +# +# Global +# _audio_list: audio library list +# Return +# 0: Not found +# 1: Success +func_audio_lib() +{ + # MD5 check: OMX Media Component Audio Common Library for Linux + func_list_search_and_md5check "${_audio_common_list}" "1" + if [ $? -eq 0 ]; then + echo "Audio Common Library not found!" + echo "" + return 0 + fi + + # MD5 check: audio library. + func_list_search_and_md5check "${_audio_list}" + if [ $? -eq 0 ]; then + # library not found. + echo "" + echo "Audio library not found." + return 0 + fi + + # Add audio common library to list + _audio_list="${_audio_common_list} ${_audio_list}" + + # Install omx common lib (if not installed) + func_install_omx_common + + # Install Audio library packages + func_list_search_and_install_wo_md5check "${_audio_list}" "${_OMX_UM_INST_DIR}" + _audio_common_install=1 + + return 1 +} + +# For Audio library +func_audio() +{ + echo "" + echo "Copying for Audio Common Packages" + + _audio_common_install=0 + + # Audio requires OMX common library + if [ ${_omx_common_install} -eq 0 ]; then + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_omx_common_list}" "1" + if [ $? -eq 0 ]; then + echo "OMX Common Library not found!" + echo "" + return + fi + else + echo "OMX Common Library already installed" + fi + + # Audio Library + func_audio_lib + if [ $? -eq 0 ]; then + echo "" + echo "Skip Audio Packages" + echo "" + return + fi + + echo "" + echo "Packages for Audio module were found and copied." + echo /=======================================================/ +} + +# For Audio M/W +# Global +# _audio_mw_list: audio M/W library list +# Return +# 0: Not found +# 1: Success +func_audio_mw() +{ + echo "" + echo "Copying for Audio M/W Packages" + + # MD5 check + func_list_search_and_md5check "${_audio_mw_list}" + if [ $? -eq 0 ]; then + # library not found. + echo "" + echo "Packages for Audio M/W module were not found." + return 0 + fi + + # Install Audio M/W library packages + func_list_search_and_install_wo_md5check "${_audio_mw_list}" "${_OMX_UM_INST_DIR}" + + echo "" + echo "Packages for Audio M/W module were found and copied." + echo /=======================================================/ + + return 1 +} + +# install OMX common library +func_install_omx_common() +{ + if [ ${_omx_common_install} -eq 0 ]; then + echo "" + echo "Install for OMX Common Packages" + func_list_search_and_install_wo_md5check "${_omx_common_list}" "${_OMX_UM_INST_DIR}" + _omx_common_install=1 + fi +} + +# install uvcs driver +func_install_uvcs() +{ + if [ ${_uvcs_install} -eq 0 ]; then + echo "" + echo "Installed UVCS driver" + func_list_search_and_install_wo_md5check "${_uvcs_list}" "${_UVCS_INST_DIR}" + _uvcs_install=1 + fi +} + +# search & MD5 check for OMX Video Decoder library +# Global +# _video_dec_list: video decoder list +# Return +# 0: Not found +# 1: Success +func_video_decoder_lib() +{ + echo "" + echo "Copying for Video Decoder Library Packages" + + # MD5 check: Decoder Common Library (rigid flag=TRUE) + func_list_search_and_md5check "${_video_dec_common_list}" "1" + if [ $? -eq 0 ]; then + echo "OMX Video Decoder Common Library not found!" + return 0 + fi + + # MD5 check: Video Decoder Library + func_list_search_and_md5check "${_video_dec_list}" + if [ $? -eq 0 ]; then + # library not found. + return 0 + fi + + # install OMX common lib (if not installed) + func_install_omx_common + + # install UVCS driver (if not installed) + func_install_uvcs + + # Add video decoder common lib to list + _video_dec_list="${_video_dec_common_list} ${_video_dec_list}" + + # install searched library + func_list_search_and_install_wo_md5check "${_video_dec_list}" "${_OMX_UM_INST_DIR}" + _video_decoder_common_install=1 + + return 1 +} + +# search & MD5 check for OMX Video Encoder library +# Global +# _video_enc_list: video encoder list +# Return +# 0: Not found +# 1: Success +func_video_encoder_lib() +{ + echo "" + echo "Copying for Video Encoder Library Packages" + + + # MD5 check Encoder Common Library (rigid flag=TRUE) + func_list_search_and_md5check "${_video_enc_common_list}" "1" + if [ $? -eq 0 ]; then + echo "OMX Video Encoder Common Library not found!" + return 0 + fi + _video_encoder_common_install=0 + + # Video Encoder Library + # MD5 check + func_list_search_and_md5check "${_video_enc_list}" + if [ $? -eq 0 ]; then + # library not found. + return 0 + fi + + # install common lib (if not installed) + func_install_omx_common + + # install UVCS driver (if not installed) + func_install_uvcs + + # Add Video encoder common library to list + _video_enc_list="${_video_enc_common_list} ${_video_enc_list}" + + # install searched library + func_list_search_and_install_wo_md5check "${_video_enc_list}" "${_OMX_UM_INST_DIR}" + _video_encoder_common_install=1 + + return 1 +} + +# For Video decoder +# Global +# _video_dec_list: video decoder list +# Return +# 0: Not found +# 1: Success +func_video_decoder() +{ + echo "" + echo "Copying for Video Decoder Packages" + + # OMX Common library + if [ ${_omx_common_install} -eq 0 ]; then + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_omx_common_list}" "1" + if [ $? -eq 0 ]; then + echo "OMX Common Library not found!" + echo "" + return + fi + else + echo "OMX Common Library already installed" + fi + + # UVCS driver + if [ ${_uvcs_install} -eq 0 ]; then + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_uvcs_list}" "1" + if [ $? -eq 0 ]; then + echo "UVCS driver not found!" + echo "" + return + fi + else + echo "UVCS driver already installed" + fi + + # OMX Decoder + # Decoder common Lib + func_video_decoder_lib + if [ $? -eq 0 ]; then + echo "" + echo "Skip Video Decoder Packages" + echo "" + return + fi + + echo "" + echo "Packages for video decoder module were found and copied." + echo /=======================================================/ +} + +# For Video encoder +func_video_encoder() +{ + echo "" + echo "Copying for Video Encoder Packages" + + # OMX Common library + if [ ${_omx_common_install} -eq 0 ]; then + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_omx_common_list}" "1" + if [ $? -eq 0 ]; then + echo "OMX Common Library not found!" + echo "" + return + fi + else + echo "OMX Common Library already installed" + fi + + # UVCS driver + if [ ${_uvcs_install} -eq 0 ]; then + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_uvcs_list}" "1" + if [ $? -eq 0 ]; then + echo "UVCS driver not found!" + echo "" + return + fi + else + echo "UVCS driver already installed" + fi + + # OMX Encoder + # Encoder common Lib + func_video_encoder_lib + if [ $? -eq 0 ]; then + echo "" + echo "Skip Video Encoder Packages" + echo "" + return + fi + + echo "" + echo "Packages for video encoder module were found and copied." + echo /=======================================================/ +} + +# For DTV kernel module +func_dtv_kern() +{ + echo "" + echo "Copying for DTV kernel module" + + _dtv_kern_install=0 + + func_list_search_and_md5check "${_dtv_km_list}" + if [ $? -eq 0 ]; then + # library not found. + echo "" + echo "DTV kernel library not found!" + return + fi + + pkg_name=`echo ${_dtv_km_list} | cut -d "," -f 2` + copyfile_name=`echo ${_dtv_km_list} | cut -d "," -f 3` + + # extract --> archive --> copied + echo "Installed DTV kernel modules" + func_search_file_in_package "${pkg_name}" "${copyfile_name}" "${_src_full}" + func_cmn_extract_archive "${_extract_mode}" "${_find_filename}" + + dtv_driver_list="ssp_drv scu_src_drv tsif_drv tddmac_drv" + for i in ${dtv_driver_list} + do + tar cfz $i.tar.gz $i + install -d ${_DTV_KM_INST_DIR} + install -m 644 $i.tar.gz ${_DTV_KM_INST_DIR} + echo " : $i.tar.gz" + done + + _dtv_kern_install=1 + + echo "" + echo "DTV kernel module were found and copied." + echo /=======================================================/ +} + +# For DTV lib +func_dtv_lib() +{ + echo "" + echo "Copying for DTV Library Packages" + + # DTV kernel modules + if [ ${_dtv_kern_install} -eq 0 ]; then + echo "DTV kernel module not found!" + echo "Skip DTV Package" + echo "" + return + fi + + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_dtv_um_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "" + echo "DTV library not found" + return + fi + + # install + func_list_search_and_install_wo_md5check "${_dtv_um_list}" "${_DTV_UM_INST_DIR}" + + echo "" + echo "DTV Package were found and copied." + echo /=======================================================/ +} + +# For DVD lib +func_dvd_lib() +{ + echo "" + echo "Copying for DVD Library Packages" + + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_dvd_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "" + echo "DVD library not found" + return + fi + + # install searched library + func_list_search_and_install_wo_md5check "${_dvd_list}" "${_DVD_UM_INST_DIR}" + + echo "" + echo "DVD Package were found and copied." + echo /=======================================================/ +} + +# For DTV/DVD main routine +func_dtv_dvd() +{ + echo "" + echo "Copying for DTV/DVD Packages" + + # DTV/DVD requires OMX Video Decoder + if [ ${_video_decoder_common_install} -eq 0 ]; then + echo "Video Decoder Library not found!" + echo "Skip DTV/DVD Package" + echo "" + return + fi + + # DTV requires Audio Decoder + if [ ${_audio_common_install} -eq 0 ]; then + echo "Audio Common Library not found!" + echo "Skip DTV Package" + echo "" + else + # DTV package + func_dtv_kern + func_dtv_lib + fi + + # DVD package + func_dvd_lib +} + +# For CMS main routine +func_cms() +{ + echo "" + echo "Copying for CMS Packages" + + copy_flag=0 + + # MD5 check + func_list_search_and_md5check "${_cms_list}" + if [ $? -eq 0 ]; then + # library not found. + echo "Skip CMS package" + echo "" + return + fi + + # Install library + func_list_search_and_install_wo_md5check "${_cms_list}" "${_CMS_UM_INST_DIR}" + + echo "" + echo "Packages for CMS were found and copied." + echo /=======================================================/ +} + +# For ADSP main routine +func_adsp() +{ + echo "" + echo "Copying for ADSP Packages" + + # MD5 check (rigid flag = TRUE) + # In ADSP, all files are necesarry + func_list_search_and_md5check "${_adsp_km_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "Skip ADSP Package" + echo "" + return + fi + + func_list_search_and_md5check "${_adsp_um_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "Skip ADSP Package" + echo "" + return + fi + + # Install kernel module + func_list_search_and_install_wo_md5check "${_adsp_km_list}" "${_ADSP_KM_INST_DIR}" + + # Install user module + func_list_search_and_install_wo_md5check "${_adsp_um_list}" "${_ADSP_UM_INST_DIR}" + + echo "" + echo "Packages for ADSP were found and copied." + echo /=======================================================/ +} + +# For ICCOM main routine +func_iccom() +{ + echo "" + echo "Copying for ICCOM Packages" + + # MD5 check (rigid flag = TRUE) + # In ICCOM, all files are necesarry + func_list_search_and_md5check "${_iccom_km_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "Skip ICCOM Package" + echo "" + return + fi + + func_list_search_and_md5check "${_iccom_um_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "Skip ICCOM Package" + echo "" + return + fi + + # Install kernel module + func_list_search_and_install_wo_md5check "${_iccom_km_list}" "${_ICCOM_KM_INST_DIR}" + + # Install user module + func_list_search_and_install_wo_md5check "${_iccom_um_list}" "${_ICCOM_UM_INST_DIR}" + + echo "" + echo "Packages for ICCOM were found and copied." + echo /=======================================================/ +} + +################################ +# Copy Script Main routine +################################ +echo "Copyscript for R-Car Gen3" +echo +#### 1) Checking current directory +if [ ! -d meta-rcar-gen3 ]; then + echo "ERROR: Please extract meta-renesas and cd to it, before execute $0" + exit 1 +fi + +#### 2) Checking Arguments +if [ "X$1" = "X" ]; then + usage + exit 1 +fi + +while [ $# -gt 0 ] ; do + case "$1" in + -f|--force) + _no_md5check=1 + ;; + -d|--debug) + _debug=1 + ;; + *) + _src_dirname=$(basename $1) + _src_path=$(cd $(dirname $1) && pwd) + _src_full=${_src_path}/${_src_dirname} + ;; + esac + shift +done + +#### 3) Checking ClickThrough present +if [ ! -f ${_src_full}/R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-*.zip ]; then + echo "R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-*.zip not found!" + usage + exit 1 +fi +if [ ! -f ${_src_full}/R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-*.zip ]; then + echo "R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-*.zip not found!" + usage + exit 1 +fi + +unzip -d ${_src_full} -oq ${_src_full}/R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-*.zip +unzip -d ${_src_full} -oq ${_src_full}/R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-*.zip + +tar -C ${_src_full} -zxf ${_src_full}/R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-*.tar.gz --strip-components 2 +tar -C ${_src_full} -zxf ${_src_full}/R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-*.tar.gz --strip-components 2 + +# source directory check +if [ ! -d ${_src_path}/${_src_dirname} ]; then + echo "${_src_path}/${_src_dirname} not found." + usage + exit 1 +fi + +if [ -n "${_debug}" ]; then + echo "src = ${_src_dirname}" + echo "src_path = ${_src_path}" + echo "src_full = ${_src_full}" + echo "no_md5check = ${_no_md5check}" + echo "" +fi + +##### 3) create temp directory +TMPWORK=${PWD}/CP_SCRIPT_TEMP +if [ -d ${TMPWORK} ]; then + echo "ERROR: Work directory already exist." + exit 1 +fi +install -d -m 700 ${TMPWORK} +cd ${TMPWORK} + +##### 4) copy +# initialize flag +_omx_common_install=0 +_uvcs_install=0 +_audio_common_install=0 +_video_decoder_common_install=0 +_video_encoder_common_install=0 +_dtv_kern_install=0 + +func_gfx +func_audio +func_audio_mw +func_video_decoder +func_video_encoder +func_dtv_dvd +func_cms +func_adsp +func_iccom + +##### 5) cleanup temp directory +func_clean_tempdir + +##### End +echo "Complete copying !" diff --git a/meta-rcar-gen3/docs/sample/copyscript/copy_proprietary_softwares.sh b/meta-rcar-gen3/docs/sample/copyscript/copy_proprietary_softwares.sh new file mode 100755 index 0000000..3a100e1 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/copyscript/copy_proprietary_softwares.sh @@ -0,0 +1,1330 @@ +#!/bin/sh + +# Copyright (C) Renesas Electronics Corporation 2015 All rights reserved. + +usage() +{ +cat << EOF + usage: `basename $0` [-f] [-d] source-directory + -f: fource copy. ignore md5check + -d: debug mode + + Ex) + `basename $0` -f my_package_dir +EOF +} + +##### MD5 list ##### +. `dirname $0`/md5list.txt + +##### Library List ##### +# Audio Library +# Please add omx audio library to "_audio_list" +# Don't use space in xxx_name. +# audio_list="<software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name>" +_audio_list="AAC-LC_decoder_lib,RTM0AC0000XAAACD30SL40C,RTM0AC0000XAAACD30SL40C.tar.gz \ + aacPlusV2_decoder_lib,RTM0AC0000XAAAPD30SL40C,RTM0AC0000XAAAPD30SL40C.tar.gz \ + MP3_decoder_lib,RTM0AC0000XAMP3D30SL40C,RTM0AC0000XAMP3D30SL40C.tar.gz \ + WMA_decoder_lib,RTM0AC0000XAWMAD30SL40C,RTM0AC0000XAWMAD30SL40C.tar.gz \ + AAC-LC_encoder_lib,RTM0AC0000XAAACE30SL40C,RTM0AC0000XAAACE30SL40C.tar.gz \ + ALAC_decoder_lib,RTM0AC0000XAALAD30SL40C,RTM0AC0000XAALAD30SL40C.tar.gz \ + FLAC_decoder_lib,RTM0AC0000XAFLAD30SL40C,RTM0AC0000XAFLAD30SL40C.tar.gz \ + Dolby_decoder_lib,RTM0AC0000XADD5D30SL40C,RTM0AC0000XADD5D30SL40C.tar.gz" + +# Audio M/W Library +# Please add omx audio library to "_audio_mw_list" +# Don't use space in xxx_name. +# audio_mw_list="<software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name>" +_audio_mw_list="AAC-LC_decoder_M/W,RTM0AC0000ADAACMZ1SL40C,RTM0AC0000ADAACMZ1SL40C.tar.gz \ + aacPlusV2_decoder_M/W,RTM0AC0000ADAAPMZ1SL40C,RTM0AC0000ADAAPMZ1SL40C.tar.gz \ + MP3_decoder_M/W,RTM0AC0000ADMP3MZ1SL40C,RTM0AC0000ADMP3MZ1SL40C.tar.gz \ + WMA_decoder_M/W,RTM0AC0000ADWMAMZ1SL40C,RTM0AC0000ADWMAMZ1SL40C.tar.gz \ + AAC-LC_encoder_M/W,RTM0AC0000AEAACMZ1SL40C,RTM0AC0000AEAACMZ1SL40C.tar.gz \ + DDD_decoder_M/W,RTM0AC0000ADDD5MZ1SL40C,RTM0AC0000ADDD5MZ1SL40C.tar.gz" + +# Video Decoder Library +# Please add omx video decoder library to "_video_dec_list" +# Don't use space in xxx_name. +# video_dec_list="<software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name>" +_video_dec_list="H263_decoder,RTM0AC0000XV263D30SL40C,RTM0AC0000XV263D30SL40C.tar.bz2 \ + H264_decoder,RTM0AC0000XV264D30SL40C,RTM0AC0000XV264D30SL40C.tar.bz2 \ + H265_decoder,RTM0AC0000XV265D30SL40C,RTM0AC0000XV265D30SL40C.tar.bz2 \ + MPEG2_decoder,RTM0AC0000XVM2VD30SL40C,RTM0AC0000XVM2VD30SL40C.tar.bz2 \ + MPEG4_decoder,RTM0AC0000XVM4VD30SL40C,RTM0AC0000XVM4VD30SL40C.tar.bz2 \ + VC1_decoder,RTM0AC0000XVVC1D30SL40C,RTM0AC0000XVVC1D30SL40C.tar.bz2 \ + DivX_decoder,RTM0AC0000XVDVXD30SL40C,RTM0AC0000XVDVXD30SL40C.tar.bz2 \ + RealVideo_decoder,RTM0AC0000XVRLVD30SL40C,RTM0AC0000XVRLVD30SL40C.tar.bz2" + +# Video Encoder Library +# Please add omx video encoder library to "_video_enc_list" +# Don't use space in xxx_name. +# video_enc_list="<software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name>" +_video_enc_list="H264_encoder,RTM0AC0000XV264E30SL40C,RTM0AC0000XV264E30SL40C.tar.bz2" + +# Common library packages +# Don't use space in xxx_name. +# XXX_list="<software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name>" +_omx_common_list="omx_common_lib,RTM0AC0000XCMCTL30SL40C,RTM0AC0000XCMCTL30SL40C.tar.bz2" +_uvcs_list="uvcs_lib,RCG3VUDRL4001ZDO,RCG3VUDRL4001ZDO.tar.bz2" +_video_enc_common_list="video_enc_common,RTM0AC0000XVCMNE30SL40C,RTM0AC0000XVCMNE30SL40C.tar.bz2" +_video_dec_common_list="video_dec_common,RTM0AC0000XVCMND30SL40C,RTM0AC0000XVCMND30SL40C.tar.bz2" +_audio_common_list="audio_common,RTM0AC0000XACMND30SL40C,RTM0AC0000XACMND30SL40C.tar.gz" + + +# DTV Library +# Please add DTV library to "_dtv_list" +# Don't use space in xxx_name. +# dtv_xx_list="<software_name>,<package_name>,<copy_file_name>,<MD5_name> \ +# <software_name>,<package_name>,<copy_file_name>,<MD5_name> \ +# <software_name>,<package_name>,<copy_file_name>,<MD5_name>" +_dtv_km_list="dtv_km,RCG3T001L4001ZDO,Software.tar.gz" +_dtv_um_list="dtv_lib,RTM0RC0000TE020000SL40C,Software.tar.gz,RTM0RC0000TE020000SL40C1 \ + dtv_userfunc,RTM0RC0000TE020000SL40C,../Reference/Reference.tar.gz,RTM0RC0000TE020000SL40C2" + +# DVD Library +# Please add DVD library to "_dvd_list" +# Don't use space in xxx_name. +# dvd_list="<software_name>,<package_name>,<copy_file_name>,<MD5_name> \ +# <software_name>,<package_name>,<copy_file_name>,<MD5_name> \ +# <software_name>,<package_name>,<copy_file_name>,<MD5_name>" +_dvd_list="dvd_lib,RTM0RC0000XDVDC301SL40C,Software.tar.gz" + +# CMS Library +# Please add CMS library to "_cms_list" +# Don't use space in xxx_name. +# cms_list="<software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name>" +_cms_list="bcm,RTM0AC0000JRCMBCV0SL40C,RTM0AC0000JRCMBCV0SL40C.tar.gz \ + blc,RTM0AC0000JRCMBLC0SL40C,RTM0AC0000JRCMBLC0SL40C.tar.gz \ + dgc,RTM0AC0000JRCMDGV0SL40C,RTM0AC0000JRCMDGV0SL40C.tar.gz" + +# ADSP +# Please add ADSP to "_adsp_list" +# Don't use space in xxx_name. +# adsp_xx_list="<software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name>" +_adsp_um_list="adsp_fw,RCG3AHFWN0101ZDP,RCG3AHFWN0101ZDP.tar.gz \ + adsp_if,RCG3AHIFL4001ZDP,RCG3AHIFL4001ZDP.tar.gz" +_adsp_km_list="adsp_driver,RCG3AHPDL4001ZDO,RCG3AHPDL4001ZDO.tar.gz" + +# GFX +# Please add GFX to "_gfx_list" +# Don't use space in xxx_name. +# gfx_list="<package_name(user)>,<copy_file_name(user)>,<package_name(kernel)>,<copy_file_name(kernel)> \ +# <package_name(user)>,<copy_file_name(user)>,<package_name(kernel)>,<copy_file_name(kernel)> \ +# <package_name(user)>,<copy_file_name(user)>,<package_name(kernel)>,<copy_file_name(kernel)>" +_gfx_list="RTM0RC7795GLTG0001SL40C,r8a7795_linux_gsx_binaries_gles3.tar.bz2,RCH3G001L4001ZDO,GSX_KM_H3.tar.bz2 \ + RTM0RC7796GLTG0001SL40C,r8a7796_linux_gsx_binaries_gles3.tar.bz2,RCM3G001L4001ZDO,GSX_KM_M3.tar.bz2 \ + INFRTM0RC7795GLTG0001SL40C,INF_r8a7795_linux_gsx_binaries_gles3.tar.bz2,RCH3G001L4001ZDO,GSX_KM_H3.tar.bz2 \ + INFRTM0RC7796GLTG0001SL40C,INF_r8a7796_linux_gsx_binaries_gles3.tar.bz2,RCM3G001L4001ZDO,GSX_KM_M3.tar.bz2" + +# ICCOM +# Please add ICCOM to "_iccom_list" +# Don't use space in xxx_name. +# iccom_xx_list="<software_name>,<package_name>,<copy_file_name>,<MD5_name> \ +# <software_name>,<package_name>,<copy_file_name>,<MD5_name> \ +# <software_name>,<package_name>,<copy_file_name>,<MD5_name>" +_iccom_km_list="iccom_mfis,RCG3ZLIDL4001ZNO,iccom-mfis.tar.bz2,RCG3ZLIDL4001ZNO1 \ + iccom_sample,RCG3ZLIDL4001ZNO,iccom-hwspinlock-sample.tar.bz2,RCG3ZLIDL4001ZNO2" +_iccom_um_list="iccom_lib,RCG3ZLILL4001ZNO,libiccom.tar.bz2,RCG3ZLILL4001ZNO" + +# Crypto Packgae list +# Please add crypto (zip) package name to "_crypto_pkg_list" +# Don't use space in xxx_name. +# crypto_pkg_list="<packgae name> <packgae name> <packgae name>" +_crypto_pkg_list="RTM0AC0000ADDD5MZ1SL40C" + +##### static value +_MODE_ZIP=1 +_MODE_TAR=2 +_MODE_CRYPTO_ZIP=3 +_GFX_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-gles/kernel-module-gles" +_GFX_UM_INST_DIR="../meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module" +_UVCS_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-uvcs/kernel-module-uvcs-drv" +_OMX_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/omx-module/omx-user-module" +_DTV_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-dtv/files" +_DTV_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/dtv-module/dtv-user-module" +_DVD_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/dvd-module/dvd-user-module" +_CMS_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/cms-module/cms-user-module" +_ADSP_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-adsp/xtensa-hifi" +_ADSP_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/adsp-module/files" +_ICCOM_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-iccom/files" +_ICCOM_UM_INST_DIR="../meta-rcar-gen3/recipes-connectivity/iccom-module/files" + +##### common function + +# $1: search file name +# $2: search directory +# return global variable +# _find_filename: find filename +# _extract_mode: _MODE_ZIP or _MODE_TAR +func_cmn_find_file() +{ +# echo "$1" +# echo "$2" + if [ -z "$1" ]; then + func_error "ERROR: func_cmn_find_file: empty filename" + fi + + if [ -z "$2" ]; then + _search_dir=${_src_full} + else + _search_dir=$2 + fi + + # search zip file +# zip_count=`find ${_search_dir} -maxdepth 1 -name "$1*.zip" | wc -l` + zip_count=`ls ${_search_dir}/$1*.zip 2>/dev/null | wc -l` + + # search tar file +# tar_count=`find ${_search_dir} -maxdepth 1 -name "$1*.tar.*" | wc -l` + tar_count=`ls ${_search_dir}/$1*.tar.* 2>/dev/null | wc -l` + + # duplicate file check + if [ 1 -lt `expr $zip_count + $tar_count` ]; then + echo "file1_zip = $zip_count" + echo "file1_tar = $tar_count" + func_error "ERROR: $1: too many files" + fi + + crypto_zip_count=0 + for i in ${_crypto_pkg_list} + do + if [ $1 = $i ]; then + crypto_zip_count=$zip_count + zip_count=0 + fi + done + + # set result + if [ 1 = $zip_count ]; then + _find_filename=$(ls ${_search_dir}/$1*.zip) + _extract_mode=${_MODE_ZIP} + elif [ 1 = $tar_count ]; then + _find_filename=$(ls ${_search_dir}/$1*.tar.*) + _extract_mode=${_MODE_TAR} + elif [ 1 = $crypto_zip_count ]; then + _find_filename=$(ls ${_search_dir}/$1*.zip) + _extract_mode=${_MODE_CRYPTO_ZIP} + else + _find_filename="" + fi +} + +# $1: Mode +# $2: archive file name +func_cmn_extract_archive() +{ + case $1 in + $_MODE_ZIP) +# echo "Zip mode" + unzip -oq $2 + ;; + $_MODE_TAR) +# echo "Tar mode" + tar xf $2 + ;; + $_MODE_CRYPTO_ZIP) +# echo "Crypto Zip mode" + unzip -oq $2 + top_dir=$(basename $2) + top_dir=${top_dir%.*} + cd ${top_dir} + unzip -oq *.zip + if [ $? -gt 0 ]; then + func_error "ERROR: FAILED ZIP PASSWORD" + fi + cd ${TMPWORK} + ;; + *) + func_error "ERROR: func_cmn_extract_archive: mode error." + exit 1 + ;; + esac +} + +# $1: set target filename. +# $2: set MD5 expectation value. +func_cmn_md5_check() +{ + _md5_func_param_filename=$1 + _md5_func_param_expectation=$2 + if [ ! -e ${_md5_func_param_filename} ]; then + func_error "func_cmn_md5_check : ERROR ${_md5_func_param_filename} not found." + fi + + _calc_md5=$(md5sum ${_md5_func_param_filename} | cut -d " " -f1) + + if [ -n "${_no_md5check}" ] || [ -z ${_md5_func_param_expectation} ]; then + echo "Skip MD5 : `basename ${_md5_func_param_filename}`" + return + fi + + if [ -n "${_debug}" ]; then + echo "MD5 target file = ${_md5_func_param_filename}" + echo "calc_md5 = ${_calc_md5}" + echo "expect_value = ${_md5_func_param_expectation}" + fi + + if [ ${_calc_md5} = ${_md5_func_param_expectation} ]; then + echo "MD5 OK : `basename ${_md5_func_param_filename}`" + else + echo "calc_md5 = ${_calc_md5}" + echo "expect_value = ${_md5_func_param_expectation}" + func_error "MD5 ERROR : ${_md5_func_param_filename}" + fi +} + +##### Error function +# $1: error message +func_error() +{ + echo "$1" + # cleanup temp directory. + func_clean_tempdir + exit 1 +} + +##### cleanup temp directory +func_clean_tempdir() +{ + echo "cleanup temp directory" + rm -rf ${TMPWORK} +} + +##### Template function for Single package + +# $1: package name +# $2: search target filename +# $3: search directory (full path) +# return +# _find_filename : the found file (full path) +# _extract_top_dir_name +func_search_file_in_package() +{ + # search package file + func_cmn_find_file $1 $3 + if [ -n "${_debug}" ]; then + echo "" + echo "FileName = ${_find_filename}" + echo "Mode = ${_extract_mode}" + fi + + if [ -z "${_find_filename}" ]; then + return + fi + + # extract + func_cmn_extract_archive ${_extract_mode} "${_find_filename}" + + # Get directory name + # {PATH}/Package_Version.tar.gz or XXXX.zip --> Package_Version + top_dir=$(basename ${_find_filename}) + top_dir=${top_dir%.*} + + # search file + num=`find ${top_dir} -name $2 | wc -l` + if [ ${num} -eq 1 ]; then + _find_filename=`find ${top_dir} -name $2` + else + # same filename exists. + _find_filename=`find ${top_dir} -name $2 | grep Software` + fi + + # set mode + if [ `echo ${_find_filename} | grep '\.'zip` ]; then + _extract_mode=${_MODE_ZIP} + else + _extract_mode=${_MODE_TAR} + fi + + # set return value + _extract_top_dir_name=${top_dir} +} + +# $1: package name +# $2: copy filename (md5 target) +# $3: expect MD5 value +# $4: search directory (full path) +# return +# _find_file_name +# _extract_top_dir_name +func_search_and_md5check() +{ + # search package file + func_cmn_find_file $1 $4 + if [ -n "${_debug}" ]; then + echo "" + echo "FileName = ${_find_filename}" + echo "Mode = ${_extract_mode}" + fi + + if [ -z "${_find_filename}" ]; then + return + fi + + # extract + func_cmn_extract_archive ${_extract_mode} "${_find_filename}" + + # MD5 + # Get directory name + # {PATH}/Package_Version.tar.gz or XXXX.zip --> Package_Version + top_dir=$(basename ${_find_filename}) + top_dir=${top_dir%.*} + + # call func_cmn_md5_check + func_cmn_md5_check "${top_dir}/$1/Software/$2" "$3" + + # set return value + _extract_top_dir_name=${top_dir} +} + +##### Template function for Group package +# $1: group package name +# $2: single package name +# $3: copy filename (md5 target) +# $4: expect MD5 value +# $5: search directory (full path) +# return +# _find_file_name +# _extract_top_dir_name +# +# NOTE) This function support level1 packaging. "grp pkg in grp pkg" dose note support. +func_search_and_md5check_grp() +{ + # search group package @SRCDIR + func_cmn_find_file $1 $5 + if [ -n "${_debug}" ]; then + echo "search group package" + echo "FileName = ${_find_filename}" + echo "Mode = ${_extract_mode}" + echo "" + fi + + if [ -z "${_find_filename}" ]; then + return + fi + + # extract group package @TMPWORK + func_cmn_extract_archive ${_extract_mode} "${_find_filename}" + + cd ${_find_filename} + # check group pachage structure + # <Package name>_<version>/Package_Info.txt + top_dir=$(basename ${_find_filename}) + top_dir=${top_dir%.*} + + if [ ! -e ${top_dir}/Package_Info.txt ]; then + echo "grp package = $1" + echo "single package = $2" + func_error "ERROR: Package_Info.txt not found in Group package." + fi + + # search single package @TMPWORK/TOPDIR/<Group Package name>/ + func_cmn_find_file $2 "${TMPWORK}/${top_dir}/$1" + if [ -n "${_debug}" ]; then + echo "search single package" + echo "FileName = ${_find_filename}" + echo "Mode = ${_extract_mode}" + echo "" + fi + + if [ -z "${_find_filename}" ]; then + return + fi + + # mv <single package> TMPWORK/. + mv ${_find_filename} ${TMPWORK}/. + + # delete group package + rm -rf ${TMPWORK}/${top_dir} + + # call search and md5check @TMPWORK + func_search_and_md5check $2 $3 $4 ${TMPWORK} +} + +##### File search and MD5check for Package list +# $1: package list +# $2: rigid flag (1: true, other: false) +# +# return +# 1: [Success] One or more files were found. +# 0: [Fail] File not found +# +# package list format +# list ="<software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \ +# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \ +# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name>" +# +# Note) Don't use space in xxx_name. +# Note) md5_variable_name is defined in md5list.txt. +# Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO +# It is omissible. The default is "_MD5_<package_name>". +func_list_search_and_md5check () +{ + find_flag=0 + + for i in $1 + do + sw_name=`echo $i | cut -d "," -f 1` + pkg_name=`echo $i | cut -d "," -f 2` + copyfile_name=`echo $i | cut -d "," -f 3` + md5_val=`echo $i | cut -d "," -f 4` + + # <MD5_name> is empty. Default MD5 name is "_MD5_<pkg_name>" + if [ -z "${md5_val}" ]; then + md5_val=`eval echo '$_MD5_'${pkg_name}` + else + md5_val=`eval echo '$_MD5_'${md5_val}` + fi + + if [ -n "${_debug}" ]; then + echo "" + echo "sw_name = $sw_name" + echo "pkg_name = $pkg_name" + echo "copyfile_name = $copyfile_name" + echo "md5_val = $md5_val" + fi + + func_search_and_md5check "${pkg_name}" "${copyfile_name}" "${md5_val}" "${_src_full}" + if [ -z "${_find_filename}" ]; then + echo "${sw_name} not found!" + # rigid flag = TRUE. Not found = ERROR + if [ "X$2" = "X1" ]; then + return 0 + fi + else + find_flag=1 + fi + done + + return ${find_flag} +} + +##### File search and install (without MD5check) for Package list +# +# $1: package list +# $2: install directory +# +# return +# 1: [Success] One or more files were installed. +# 0: [Fail] File not found +# +# package list format +# list ="<software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \ +# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \ +# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name>" +# +# Note) Don't use space in xxx_name. +# Note) md5_variable_name is defined in md5list.txt. +# Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO +# It is omissible. The default is "_MD5_<package_name>". +func_list_search_and_install_wo_md5check() +{ + find_flag=0 + + for i in $1 + do + sw_name=`echo $i | cut -d "," -f 1` + pkg_name=`echo $i | cut -d "," -f 2` + copyfile_name=`echo $i | cut -d "," -f 3` + md5_val=`echo $i | cut -d "," -f 4` + + # <MD5_name> is empty. Default MD5 name is "_MD5_<pkg_name>" + if [ -z "${md5_val}" ]; then + md5_val=`eval echo '$_MD5_'$pkg_name` + else + md5_val=`eval echo '$_MD5_'${md5_val}` + fi + + copyfile_name=$(basename ${copyfile_name}) + + if [ -n "${_debug}" ]; then + echo "" + echo "sw_name = $sw_name" + echo "pkg_name = $pkg_name" + echo "copyfile_name = $copyfile_name" + echo "md5_val = $md5_val" + fi + + # file search + func_search_file_in_package "${pkg_name}" "${copyfile_name}" "${_src_full}" + if [ -z "${_find_filename}" ]; then + echo "${sw_name} not found!" + else + find_flag=1 + + # install + install -d $2 + install -m 0644 ${_find_filename} $2 + echo "Installed $sw_name" + echo " : ${pkg_name}" + fi + done + + return ${find_flag} +} + +##### File search and install for Package list +# +# $1: package list +# $2: install directory +# +# return +# 1: [Success] One or more files were installed. +# 0: [Fail] File not found +# +# package list format +# list ="<software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \ +# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \ +# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name>" +# +# Note) Don't use space in xxx_name. +# Note) md5_variable_name is defined in md5list.txt. +# Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO +# It is omissible. The default is "_MD5_<package_name>". +func_list_search_and_install() +{ + find_flag=0 + + for i in $1 + do + sw_name=`echo $i | cut -d "," -f 1` + pkg_name=`echo $i | cut -d "," -f 2` + copyfile_name=`echo $i | cut -d "," -f 3` + md5_val=`echo $i | cut -d "," -f 4` + + # <MD5_name> is empty. Default MD5 name is "_MD5_<pkg_name>" + if [ -z "${md5_val}" ]; then + md5_val=`eval echo '$_MD5_'$pkg_name` + else + md5_val=`eval echo '$_MD5_'${md5_val}` + fi + + if [ -n "${_debug}" ]; then + echo "" + echo "sw_name = $sw_name" + echo "pkg_name = $pkg_name" + echo "copyfile_name = $copyfile_name" + echo "md5_val = $md5_val" + fi + + # seach & MD5 check + func_search_and_md5check "${pkg_name}" "${copyfile_name}" "${md5_val}" "${_src_full}" + if [ -z "${_find_filename}" ]; then + echo "${sw_name} not found!" + else + find_flag=1 + + # Get directory name + # _find_filename = pkg file (full path). It is not copyfile. + top_dir=$(basename ${_find_filename}) + top_dir=${top_dir%.*} + + # install + install -d $2 + install -m 0644 ${top_dir}/${pkg_name}/Software/${copyfile_name} $2 + echo "Installed $sw_name" + echo " : ${pkg_name}" + fi + done + + return ${find_flag} +} + +##### Package function + +# For 3D graphics packages +func_gfx() +{ + echo "" + echo "Copying for Graphic Packages" + + copy_flag=0 + + for i in ${_gfx_list} + do + user_pkg_name=`echo $i | cut -d "," -f 1` + user_copyfile_name=`echo $i | cut -d "," -f 2` + user_md5_val=`eval echo '$_MD5_'${user_pkg_name}` + kern_pkg_name=`echo $i | cut -d "," -f 3` + kern_copyfile_name=`echo $i | cut -d "," -f 4` + kern_md5_val=`eval echo '$_MD5_'${kern_pkg_name}` + + if [ -n "${_debug}" ]; then + echo "" + echo "user_pkg_name = ${user_pkg_name}" + echo "user_copyfile_name= ${user_copyfile_name}" + echo "user_md5_val = ${user_md5_val}" + echo "kern_pkg_name = ${kern_pkg_name}" + echo "kern_copyfile_name= ${kern_copyfile_name}" + echo "kern_md5_val = ${kern_md5_val}" + fi + + # user module (file1) + func_search_and_md5check "${user_pkg_name}" "${user_copyfile_name}" "${user_md5_val}" "${_src_full}" + + if [ -z "${_find_filename}" ]; then + echo "${user_pkg_name} not found!" + continue + fi + + file1_top_dir=${_extract_top_dir_name} + echo "file1 top : ${file1_top_dir}" + + # kernel module (file2) + func_search_and_md5check "${kern_pkg_name}" "${kern_copyfile_name}" "${kern_md5_val}" "${_src_full}" + + # file1 exist, but file2 not exist + if [ -z "${_find_filename}" ]; then + func_error "ERROR: func_gfx: package file for Graphic is incomplete." + fi + + file2_top_dir=${_extract_top_dir_name} + echo "file2 top : ${file2_top_dir}" + + # Finally copy is performed + copy_flag=1 + install -d ${_GFX_UM_INST_DIR} + install -m 0644 ${file1_top_dir}/${user_pkg_name}/Software/${user_copyfile_name} ${_GFX_UM_INST_DIR}/${user_copyfile_name##INF_} + install -d ${_GFX_KM_INST_DIR} + install -m 0644 ${file2_top_dir}/${kern_pkg_name}/Software/${kern_copyfile_name} ${_GFX_KM_INST_DIR} + echo "Installed GFX package" + echo " : ${user_pkg_name}" + echo " : ${kern_pkg_name}" + echo "" + done + + if [ ${copy_flag} -eq 0 ]; then + return + fi + + echo "" + echo "Packages for GFX module were found and copied." + echo /=======================================================/ +} + +##### For Multi Media + +# For Audio library copy +# +# Global +# _audio_list: audio library list +# Return +# 0: Not found +# 1: Success +func_audio_lib() +{ + # MD5 check: OMX Media Component Audio Common Library for Linux + func_list_search_and_md5check "${_audio_common_list}" "1" + if [ $? -eq 0 ]; then + echo "Audio Common Library not found!" + echo "" + return 0 + fi + + # MD5 check: audio library. + func_list_search_and_md5check "${_audio_list}" + if [ $? -eq 0 ]; then + # library not found. + echo "" + echo "Audio library not found." + return 0 + fi + + # Add audio common library to list + _audio_list="${_audio_common_list} ${_audio_list}" + + # Install omx common lib (if not installed) + func_install_omx_common + + # Install Audio library packages + func_list_search_and_install_wo_md5check "${_audio_list}" "${_OMX_UM_INST_DIR}" + _audio_common_install=1 + + return 1 +} + +# For Audio library +func_audio() +{ + echo "" + echo "Copying for Audio Common Packages" + + _audio_common_install=0 + + # Audio requires OMX common library + if [ ${_omx_common_install} -eq 0 ]; then + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_omx_common_list}" "1" + if [ $? -eq 0 ]; then + echo "OMX Common Library not found!" + echo "" + return + fi + else + echo "OMX Common Library already installed" + fi + + # Audio Library + func_audio_lib + if [ $? -eq 0 ]; then + echo "" + echo "Skip Audio Packages" + echo "" + return + fi + + echo "" + echo "Packages for Audio module were found and copied." + echo /=======================================================/ +} + +# For Audio M/W +# Global +# _audio_mw_list: audio M/W library list +# Return +# 0: Not found +# 1: Success +func_audio_mw() +{ + echo "" + echo "Copying for Audio M/W Packages" + + # MD5 check + func_list_search_and_md5check "${_audio_mw_list}" + if [ $? -eq 0 ]; then + # library not found. + echo "" + echo "Packages for Audio M/W module were not found." + return 0 + fi + + # Install Audio M/W library packages + func_list_search_and_install_wo_md5check "${_audio_mw_list}" "${_OMX_UM_INST_DIR}" + + echo "" + echo "Packages for Audio M/W module were found and copied." + echo /=======================================================/ + + return 1 +} + +# install OMX common library +func_install_omx_common() +{ + if [ ${_omx_common_install} -eq 0 ]; then + echo "" + echo "Install for OMX Common Packages" + func_list_search_and_install_wo_md5check "${_omx_common_list}" "${_OMX_UM_INST_DIR}" + _omx_common_install=1 + fi +} + +# install uvcs driver +func_install_uvcs() +{ + if [ ${_uvcs_install} -eq 0 ]; then + echo "" + echo "Installed UVCS driver" + func_list_search_and_install_wo_md5check "${_uvcs_list}" "${_UVCS_INST_DIR}" + _uvcs_install=1 + fi +} + +# search & MD5 check for OMX Video Decoder library +# Global +# _video_dec_list: video decoder list +# Return +# 0: Not found +# 1: Success +func_video_decoder_lib() +{ + echo "" + echo "Copying for Video Decoder Library Packages" + + # MD5 check: Decoder Common Library (rigid flag=TRUE) + func_list_search_and_md5check "${_video_dec_common_list}" "1" + if [ $? -eq 0 ]; then + echo "OMX Video Decoder Common Library not found!" + return 0 + fi + + # MD5 check: Video Decoder Library + func_list_search_and_md5check "${_video_dec_list}" + if [ $? -eq 0 ]; then + # library not found. + return 0 + fi + + # install OMX common lib (if not installed) + func_install_omx_common + + # install UVCS driver (if not installed) + func_install_uvcs + + # Add video decoder common lib to list + _video_dec_list="${_video_dec_common_list} ${_video_dec_list}" + + # install searched library + func_list_search_and_install_wo_md5check "${_video_dec_list}" "${_OMX_UM_INST_DIR}" + _video_decoder_common_install=1 + + return 1 +} + +# search & MD5 check for OMX Video Encoder library +# Global +# _video_enc_list: video encoder list +# Return +# 0: Not found +# 1: Success +func_video_encoder_lib() +{ + echo "" + echo "Copying for Video Encoder Library Packages" + + + # MD5 check Encoder Common Library (rigid flag=TRUE) + func_list_search_and_md5check "${_video_enc_common_list}" "1" + if [ $? -eq 0 ]; then + echo "OMX Video Encoder Common Library not found!" + return 0 + fi + _video_encoder_common_install=0 + + # Video Encoder Library + # MD5 check + func_list_search_and_md5check "${_video_enc_list}" + if [ $? -eq 0 ]; then + # library not found. + return 0 + fi + + # install common lib (if not installed) + func_install_omx_common + + # install UVCS driver (if not installed) + func_install_uvcs + + # Add Video encoder common library to list + _video_enc_list="${_video_enc_common_list} ${_video_enc_list}" + + # install searched library + func_list_search_and_install_wo_md5check "${_video_enc_list}" "${_OMX_UM_INST_DIR}" + _video_encoder_common_install=1 + + return 1 +} + +# For Video decoder +# Global +# _video_dec_list: video decoder list +# Return +# 0: Not found +# 1: Success +func_video_decoder() +{ + echo "" + echo "Copying for Video Decoder Packages" + + # OMX Common library + if [ ${_omx_common_install} -eq 0 ]; then + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_omx_common_list}" "1" + if [ $? -eq 0 ]; then + echo "OMX Common Library not found!" + echo "" + return + fi + else + echo "OMX Common Library already installed" + fi + + # UVCS driver + if [ ${_uvcs_install} -eq 0 ]; then + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_uvcs_list}" "1" + if [ $? -eq 0 ]; then + echo "UVCS driver not found!" + echo "" + return + fi + else + echo "UVCS driver already installed" + fi + + # OMX Decoder + # Decoder common Lib + func_video_decoder_lib + if [ $? -eq 0 ]; then + echo "" + echo "Skip Video Decoder Packages" + echo "" + return + fi + + echo "" + echo "Packages for video decoder module were found and copied." + echo /=======================================================/ +} + +# For Video encoder +func_video_encoder() +{ + echo "" + echo "Copying for Video Encoder Packages" + + # OMX Common library + if [ ${_omx_common_install} -eq 0 ]; then + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_omx_common_list}" "1" + if [ $? -eq 0 ]; then + echo "OMX Common Library not found!" + echo "" + return + fi + else + echo "OMX Common Library already installed" + fi + + # UVCS driver + if [ ${_uvcs_install} -eq 0 ]; then + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_uvcs_list}" "1" + if [ $? -eq 0 ]; then + echo "UVCS driver not found!" + echo "" + return + fi + else + echo "UVCS driver already installed" + fi + + # OMX Encoder + # Encoder common Lib + func_video_encoder_lib + if [ $? -eq 0 ]; then + echo "" + echo "Skip Video Encoder Packages" + echo "" + return + fi + + echo "" + echo "Packages for video encoder module were found and copied." + echo /=======================================================/ +} + +# For DTV kernel module +func_dtv_kern() +{ + echo "" + echo "Copying for DTV kernel module" + + _dtv_kern_install=0 + + func_list_search_and_md5check "${_dtv_km_list}" + if [ $? -eq 0 ]; then + # library not found. + echo "" + echo "DTV kernel library not found!" + return + fi + + pkg_name=`echo ${_dtv_km_list} | cut -d "," -f 2` + copyfile_name=`echo ${_dtv_km_list} | cut -d "," -f 3` + + # extract --> archive --> copied + echo "Installed DTV kernel modules" + func_search_file_in_package "${pkg_name}" "${copyfile_name}" "${_src_full}" + func_cmn_extract_archive "${_extract_mode}" "${_find_filename}" + + dtv_driver_list="ssp_drv scu_src_drv tsif_drv tddmac_drv" + for i in ${dtv_driver_list} + do + tar cfz $i.tar.gz $i + install -d ${_DTV_KM_INST_DIR} + install -m 644 $i.tar.gz ${_DTV_KM_INST_DIR} + echo " : $i.tar.gz" + done + + _dtv_kern_install=1 + + echo "" + echo "DTV kernel module were found and copied." + echo /=======================================================/ +} + +# For DTV lib +func_dtv_lib() +{ + echo "" + echo "Copying for DTV Library Packages" + + # DTV kernel modules + if [ ${_dtv_kern_install} -eq 0 ]; then + echo "DTV kernel module not found!" + echo "Skip DTV Package" + echo "" + return + fi + + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_dtv_um_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "" + echo "DTV library not found" + return + fi + + # install + func_list_search_and_install_wo_md5check "${_dtv_um_list}" "${_DTV_UM_INST_DIR}" + + echo "" + echo "DTV Package were found and copied." + echo /=======================================================/ +} + +# For DVD lib +func_dvd_lib() +{ + echo "" + echo "Copying for DVD Library Packages" + + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_dvd_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "" + echo "DVD library not found" + return + fi + + # install searched library + func_list_search_and_install_wo_md5check "${_dvd_list}" "${_DVD_UM_INST_DIR}" + + echo "" + echo "DVD Package were found and copied." + echo /=======================================================/ +} + +# For DTV/DVD main routine +func_dtv_dvd() +{ + echo "" + echo "Copying for DTV/DVD Packages" + + # DTV/DVD requires OMX Video Decoder + if [ ${_video_decoder_common_install} -eq 0 ]; then + echo "Video Decoder Library not found!" + echo "Skip DTV/DVD Package" + echo "" + return + fi + + # DTV requires Audio Decoder + if [ ${_audio_common_install} -eq 0 ]; then + echo "Audio Common Library not found!" + echo "Skip DTV Package" + echo "" + else + # DTV package + func_dtv_kern + func_dtv_lib + fi + + # DVD package + func_dvd_lib +} + +# For CMS main routine +func_cms() +{ + echo "" + echo "Copying for CMS Packages" + + copy_flag=0 + + # MD5 check + func_list_search_and_md5check "${_cms_list}" + if [ $? -eq 0 ]; then + # library not found. + echo "Skip CMS package" + echo "" + return + fi + + # Install library + func_list_search_and_install_wo_md5check "${_cms_list}" "${_CMS_UM_INST_DIR}" + + echo "" + echo "Packages for CMS were found and copied." + echo /=======================================================/ +} + +# For ADSP main routine +func_adsp() +{ + echo "" + echo "Copying for ADSP Packages" + + # MD5 check (rigid flag = TRUE) + # In ADSP, all files are necesarry + func_list_search_and_md5check "${_adsp_km_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "Skip ADSP Package" + echo "" + return + fi + + func_list_search_and_md5check "${_adsp_um_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "Skip ADSP Package" + echo "" + return + fi + + # Install kernel module + func_list_search_and_install_wo_md5check "${_adsp_km_list}" "${_ADSP_KM_INST_DIR}" + + # Install user module + func_list_search_and_install_wo_md5check "${_adsp_um_list}" "${_ADSP_UM_INST_DIR}" + + echo "" + echo "Packages for ADSP were found and copied." + echo /=======================================================/ +} + +# For ICCOM main routine +func_iccom() +{ + echo "" + echo "Copying for ICCOM Packages" + + # MD5 check (rigid flag = TRUE) + # In ICCOM, all files are necesarry + func_list_search_and_md5check "${_iccom_km_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "Skip ICCOM Package" + echo "" + return + fi + + func_list_search_and_md5check "${_iccom_um_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "Skip ICCOM Package" + echo "" + return + fi + + # Install kernel module + func_list_search_and_install_wo_md5check "${_iccom_km_list}" "${_ICCOM_KM_INST_DIR}" + + # Install user module + func_list_search_and_install_wo_md5check "${_iccom_um_list}" "${_ICCOM_UM_INST_DIR}" + + echo "" + echo "Packages for ICCOM were found and copied." + echo /=======================================================/ +} + +################################ +# Copy Script Main routine +################################ +echo "Copyscript for R-Car Gen3" +echo +#### 1) Checking current directory +if [ ! -d meta-rcar-gen3 ]; then + echo "ERROR: Please extract meta-renesas and cd to it, before execute $0" + exit 1 +fi + +#### 2) Checking Arguments +if [ "X$1" = "X" ]; then + usage + exit 1 +fi + +while [ $# -gt 0 ] ; do + case "$1" in + -f|--force) + _no_md5check=1 + ;; + -d|--debug) + _debug=1 + ;; + *) + _src_dirname=$(basename $1) + _src_path=$(cd $(dirname $1) && pwd) + _src_full=${_src_path}/${_src_dirname} + ;; + esac + shift +done + +# source directory check +if [ ! -d ${_src_path}/${_src_dirname} ]; then + echo "${_src_path}/${_src_dirname} not found." + usage + exit 1 +fi + +if [ -n "${_debug}" ]; then + echo "src = ${_src_dirname}" + echo "src_path = ${_src_path}" + echo "src_full = ${_src_full}" + echo "no_md5check = ${_no_md5check}" + echo "" +fi + +##### 3) create temp directory +TMPWORK=${PWD}/CP_SCRIPT_TEMP +if [ -d ${TMPWORK} ]; then + echo "ERROR: Work directory already exist." + exit 1 +fi +install -d -m 700 ${TMPWORK} +cd ${TMPWORK} + +##### 4) copy +# initialize flag +_omx_common_install=0 +_uvcs_install=0 +_audio_common_install=0 +_video_decoder_common_install=0 +_video_encoder_common_install=0 +_dtv_kern_install=0 + +func_gfx +func_audio +func_audio_mw +func_video_decoder +func_video_encoder +func_dtv_dvd +func_cms +func_adsp +func_iccom + +##### 5) cleanup temp directory +func_clean_tempdir + +##### End +echo "Complete copying !" diff --git a/meta-rcar-gen3/docs/sample/copyscript/md5list.txt b/meta-rcar-gen3/docs/sample/copyscript/md5list.txt new file mode 100644 index 0000000..dbfae35 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/copyscript/md5list.txt @@ -0,0 +1,54 @@ +# GFX +_MD5_RTM0RC7795GLTG0001SL40C="" +_MD5_RCH3G001L4001ZDO="" +_MD5_RTM0RC7796GLTG0001SL40C="" +_MD5_RCM3G001L4001ZDO="" +_MD5_INFRTM0RC7795GLTG0001SL40C="" +_MD5_INFRTM0RC7796GLTG0001SL40C="" +# OMX AUDIO +_MD5_RTM0AC0000ADAACMZ1SL40C="633c98c3f16a17642a41961dd30bcc92" +_MD5_RTM0AC0000XAAACD30SL40C="74704834f4c3f9fbf9c361d96d3b1780" +_MD5_RTM0AC0000XACMND30SL40C="ae19ad064b1190735dc68e94f76e3a97" +_MD5_RTM0AC0000ADAAPMZ1SL40C="b610a2ca5ea9f30f4506c9c7c53731f3" +_MD5_RTM0AC0000ADMP3MZ1SL40C="0028d4cdf1454b305eeaee32111d1ed0" +_MD5_RTM0AC0000ADWMAMZ1SL40C="91bb90b01d629a69c8d3ad2bbbca7ccc" +_MD5_RTM0AC0000XAAAPD30SL40C="17f1542e902f4949ab9c9724fb732ec4" +_MD5_RTM0AC0000XAMP3D30SL40C="aaa09a394eaeed9909c1bc9ba00f8878" +_MD5_RTM0AC0000XAWMAD30SL40C="9ac2519d0770c109dcb56c27bc0fe695" +_MD5_RTM0AC0000AEAACMZ1SL40C="8fcef3ca1e545e1b8121a92840620cf4" +_MD5_RTM0AC0000XAAACE30SL40C="ea9e832be17b1ef9d4d2ad9b96fd7648" +_MD5_RTM0AC0000XAALAD30SL40C="53bfe0457e134ae717379fe4a7432a15" +_MD5_RTM0AC0000XAFLAD30SL40C="1f9a3c2c602ab097bc11b5f84e7ecb59" +_MD5_RTM0AC0000XADD5D30SL40C="d712ce9d896db9204f62cbd65de5a7ab" +_MD5_RTM0AC0000ADDD5MZ1SL40C="" +# OMX VIDEO +_MD5_RTM0AC0000XV263D30SL40C="e72807352a260458f68f3b2e49373cc2" +_MD5_RTM0AC0000XV264D30SL40C="4a235653101c8379fda264ce4b1565b3" +_MD5_RTM0AC0000XCMCTL30SL40C="d934d193bf886dd9c879d13867df9991" +_MD5_RCG3VUDRL4001ZDO="9740025ea68b829ea588e968290d3bc3" +_MD5_RTM0AC0000XVCMND30SL40C="d235e997bdc1f10b59e0a21b62443cb3" +_MD5_RTM0AC0000XV265D30SL40C="fe220b86abf121a306175b87011c673a" +_MD5_RTM0AC0000XVM2VD30SL40C="69058e4080112a55d1924613185a15ab" +_MD5_RTM0AC0000XVM4VD30SL40C="b2cc6fcea12eee27e36a5e9b312418e8" +_MD5_RTM0AC0000XVVC1D30SL40C="73c57cf89fda6d344d342b2cb9a2ff85" +_MD5_RTM0AC0000XVCMNE30SL40C="7c64ac5d43ef8f2a1f2113d06432d91f" +_MD5_RTM0AC0000XV264E30SL40C="d885a95300132bf2d4f58ed132342935" +_MD5_RTM0AC0000XVDVXD30SL40C="07c96399cb5e3b1f1ef02e66ae5592f8" +_MD5_RTM0AC0000XVRLVD30SL40C="80e016713c778df52de86299cd33296a" +# DTV/DVD +_MD5_RCG3T001L4001ZDO="" +_MD5_RTM0RC0000TE020000SL40C1="" +_MD5_RTM0RC0000TE020000SL40C2="" +_MD5_RTM0RC0000XDVDC301SL40C="" +# CMS +_MD5_RTM0AC0000JRCMBCV0SL40C="7eef331486f58cd09d07e73157cc4097" +_MD5_RTM0AC0000JRCMBLC0SL40C="11bf02bb77fd994e56e8899ad450a96e" +_MD5_RTM0AC0000JRCMDGV0SL40C="5f85df2edb41d4f48c6fd02f8fb461cb" +# ADSP +_MD5_RCG3AHFWN0101ZDP="d18d2533cc56739d511b20c177f54b43" +_MD5_RCG3AHIFL4001ZDP="100f193e8475b33865a24032e3568489" +_MD5_RCG3AHPDL4001ZDO="14a718f7beee377f29180cfbdbe97828" +# ICCOM +_MD5_RCG3ZLIDL4001ZNO1="c81a9d09fbb5d38cb30bcbdc56e1e58a" +_MD5_RCG3ZLIDL4001ZNO2="410daab0f338e4311a6e4422f770d3ee" +_MD5_RCG3ZLILL4001ZNO="7fa20447e36c2909e87daa90c460dde4" diff --git a/meta-rcar-gen3/docs/sample/patch/patch-for-linaro-gcc/0001-rcar-gen3-add-readme-for-building-with-Linaro-Gcc.patch b/meta-rcar-gen3/docs/sample/patch/patch-for-linaro-gcc/0001-rcar-gen3-add-readme-for-building-with-Linaro-Gcc.patch new file mode 100644 index 0000000..c00327f --- /dev/null +++ b/meta-rcar-gen3/docs/sample/patch/patch-for-linaro-gcc/0001-rcar-gen3-add-readme-for-building-with-Linaro-Gcc.patch @@ -0,0 +1,151 @@ +From 019d1f04b83db8cd4d5a9381d5ef0c90e946cd05 Mon Sep 17 00:00:00 2001 +From: Phong Man Tran <phong.tran.wh@rvc.renesas.com> +Date: Mon, 6 Jul 2015 14:48:50 +0700 +Subject: [PATCH] rcar-gen3: add readme for building with Linaro Gcc + +This patch add the dependent layer information, build instructions +for using Linaro Gcc. + +Updated on Dec, 2016: +- Add H3ULCB +- Change supported branch from jethro to krogoth +- Change Maintainer information. + +Signed-off-by: Phong Man Tran <phong.tran.wh@rvc.renesas.com> +Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com> +--- + meta-rcar-gen3/README.linaro | 122 +++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 122 insertions(+) + create mode 100644 meta-rcar-gen3/README.linaro + +diff --git a/meta-rcar-gen3/README.linaro b/meta-rcar-gen3/README.linaro +new file mode 100644 +index 0000000..6542d43 +--- /dev/null ++++ b/meta-rcar-gen3/README.linaro +@@ -0,0 +1,122 @@ ++meta-rcar-gen3 ++============== ++ ++This layer provides that evaluation board is mounted ARM SoCs of Renesas ++Electronics, called the R-Car Generation 3. Currently, this supports ++board and the SoCs of the following: ++ - Board: Salvator-X / SoC: R8A7795 (R-Car H3), R8A7796 (R-Car M3) ++ - Board: R-Car Starter Kit premier(H3ULCB) / SoC: R8A7795 ++ ++Patches ++======= ++ ++Please submit any patches for this layer to: takamitsu.honda.pv@renesas.com ++Please see the MAINTAINERS file for more details. ++ ++Dependencies ++============ ++ ++This layer depends on: ++ ++ URI: git://git.yoctoproject.org/poky ++ layers: meta, meta-yocto, meta-yocto-bsp ++ branch: krogoth ++ ++ URI: git://git.yoctoproject.org/meta-renesas ++ layers: meta-rcar-gen3 ++ branch: krogoth ++ ++ URI: https://git.linaro.org/openembedded/meta-linaro.git ++ layers: meta-linaro-toolchain ++ branch: krogoth ++ ++ URI: git://git.openembedded.org/meta-openembedded ++ layers: meta-oe ++ branch: krogoth ++ ++Build Instructions ++================== ++ ++The following instructions require a Poky installation (or equivalent). ++ ++Initialize a build using the 'oe-init-build-env' script in Poky. e.g.: ++ ++ $ source poky/oe-init-build-env ++ ++After that, initialized configure bblayers.conf by adding meta-rcar-gen3 layer. e.g.: ++ ++ BBLAYERS ?= " \ ++ <path to layer>/poky/meta \ ++ <path to layer>/poky/meta-yocto \ ++ <path to layer>/poky/meta-yocto-bsp \ ++ <path to layer>/meta-renesas/meta-rcar-gen3 \ ++ <path to layer>/meta-linaro/meta-linaro-toolchain \ ++ <path to layer>/meta-openembedded/meta-oe \ ++ " ++ ++To build a specific target BSP, configure the associated machine in local.conf: ++ ++ MACHINE ??= "<supported board name>" ++ ++Select the SOC ++ ++ For H3: r8a7795 ++ SOC_FAMILY = "r8a7795" ++ ++ For M3: r8a7796 ++ SOC_FAMILY = "r8a7796" ++ ++Must change the package class to ipk files in local.conf: ++ ++ PACKAGE_CLASSES ?= "package_ipk" ++ ++Must Change the Gcc version in local.conf. ++ ++ GCCVERSION="linaro-5.2" ++ ++Configure for systemd init in local.conf: ++ ++ DISTRO_FEATURES_append = " systemd" ++ VIRTUAL-RUNTIME_init_manager = "systemd" ++ ++Build the target file system image using bitbake: ++ ++ $ bitbake core-image-minimal ++ ++After completing the images for the target machine will be available in the output ++directory 'tmp/deploy/images/<supported board name>'. ++ ++Images generated: ++ * Image (generic Linux Kernel binary image file) ++ * Image-<machine name>.dtb (DTB for target machine) ++ * core-image-minimal-<machine name>.tar.bz2 (rootfs tar+bzip2) ++ * core-image-minimal-<machine name>.ext4 (rootfs ext4 format) ++ * core-image-minimal-<machine name>.cpio.gz (rootfs cpio+gz format) ++ ++Build Instructions for SDK ++========================== ++This may be changed in the near feature. These instructions are tentative. ++ ++Should define the staticdev in SDK image feature for installing the static libs ++to SDK in local.conf. ++ ++ SDKIMAGE_FEATURES_append = " staticdev-pkgs" ++ ++Use bitbake -c populate_sdk for generating the toolchain SDK: ++For 64-bit target SDK (aarch64): ++ ++ $ bitbake core-image-minimal -c populate_sdk ++ ++The SDK can be found in the output directory 'tmp/deploy/sdk' ++ * poky-glibc-x86_64-core-image-minimal-aarch64-toolchain-x.x.sh ++ ++Usage of toolchain SDK: ++Install the SDK to the default: /opt/poky/x.x ++(x.x is YP version, i.e. 2.1.) ++For 64-bit target SDK: ++ ++ $ sh poky-glibc-x86_64-core-image-minimal-aarch64-toolchain-x.x.sh ++ ++For 64-bit application use environment script in /opt/poky/x.x ++ ++ $ source /opt/poky/x.x/environment-setup-aarch64-poky-linux +-- +1.9.1 + diff --git a/meta-rcar-gen3/include/adsp-control.inc b/meta-rcar-gen3/include/adsp-control.inc new file mode 100644 index 0000000..44a8d14 --- /dev/null +++ b/meta-rcar-gen3/include/adsp-control.inc @@ -0,0 +1,2 @@ +# USE_ADSP for Audio DSP +USE_ADSP = "${@bb.utils.contains('DISTRO_FEATURES', 'adsp', '1', '0', d)}" diff --git a/meta-rcar-gen3/include/avb-control.inc b/meta-rcar-gen3/include/avb-control.inc new file mode 100644 index 0000000..6ed7f53 --- /dev/null +++ b/meta-rcar-gen3/include/avb-control.inc @@ -0,0 +1,2 @@ +# USE_AVB for AVB Software Package for Linux +USE_AVB = "${@'1' if 'avb' in '${DISTRO_FEATURES}' else '0'}" diff --git a/meta-rcar-gen3/include/cms-control.inc b/meta-rcar-gen3/include/cms-control.inc new file mode 100644 index 0000000..2ebfa51 --- /dev/null +++ b/meta-rcar-gen3/include/cms-control.inc @@ -0,0 +1,18 @@ +# USE_CMSBCM for Basic Color Management Middleware for Linux +USE_CMSBCM = "${@bb.utils.contains('DISTRO_FEATURES', 'cmsbcm', '1', '0', d)}" + +# USE_CMSBLC for Backlight Control Middleware for Linux +USE_CMSBLC = "${@bb.utils.contains('DISTRO_FEATURES', 'cmsblc', '1', '0', d)}" + +# USE_CMSDGC for Dynamic Gamma Correction Middleware for Linux +USE_CMSDGC = "${@bb.utils.contains('DISTRO_FEATURES', 'cmsdgc', '1', '0', d)}" + +# CMS Flag list +LIST_CMS_FLAG = " \ + ${USE_CMSBCM} \ + ${USE_CMSBLC} \ + ${USE_CMSDGC} \ +" + +# USE_CMS for Color Management Middleware +USE_CMS = "${@'1' if '1' in '${LIST_CMS_FLAG}' else '0'}" diff --git a/meta-rcar-gen3/include/dtv-dvd-control.inc b/meta-rcar-gen3/include/dtv-dvd-control.inc new file mode 100644 index 0000000..9029dfd --- /dev/null +++ b/meta-rcar-gen3/include/dtv-dvd-control.inc @@ -0,0 +1,5 @@ +# USE_DTV for ISDB-T DTV Software Package +USE_DTV = "${@'1' if 'dtv' in '${DISTRO_FEATURES}' else '0'}" + +# USE_DVD for DVD Core-Middleware for Linux +USE_DVD = "${@'1' if 'dvd' in '${DISTRO_FEATURES}' else '0'}" diff --git a/meta-rcar-gen3/include/gles-control.inc b/meta-rcar-gen3/include/gles-control.inc new file mode 100644 index 0000000..045caa3 --- /dev/null +++ b/meta-rcar-gen3/include/gles-control.inc @@ -0,0 +1,6 @@ +USE_GLES = "${@'1' if 'gsx' in '${MACHINE_FEATURES}' else '0'}" +USE_GLES_WAYLAND = \ + "${@'1' if '${USE_GLES}' == '1' and 'wayland' in '${DISTRO_FEATURES}' else '0'}" +USE_WAYLAND_IVI_SHELL = \ + "${@'1' if 'ivi-shell' in '${DISTRO_FEATURES}' and \ + 'wayland' in '${DISTRO_FEATURES}' else '0'}" diff --git a/meta-rcar-gen3/include/iccom-control.inc b/meta-rcar-gen3/include/iccom-control.inc new file mode 100644 index 0000000..bb8bd2c --- /dev/null +++ b/meta-rcar-gen3/include/iccom-control.inc @@ -0,0 +1,2 @@ +# USE_ICCOM for Linux ICCOM driver, Linux ICCOM library +USE_ICCOM = "${@'1' if 'iccom' in '${DISTRO_FEATURES}' else '0'}" diff --git a/meta-rcar-gen3/include/multimedia-control.inc b/meta-rcar-gen3/include/multimedia-control.inc new file mode 100644 index 0000000..beeabc1 --- /dev/null +++ b/meta-rcar-gen3/include/multimedia-control.inc @@ -0,0 +1,9 @@ +# USE_MULTIMEDIA for Renesas Multimedia package +USE_MULTIMEDIA = "${@'1' if 'multimedia' in '${MACHINE_FEATURES}' else '0'}" +USE_MULTIMEDIA_TP = "${@'1' if 'mm-test' in '${DISTRO_FEATURES}' else '0'}" + +# For wayland +USE_WAYLAND = "${@'1' if 'wayland' in '${DISTRO_FEATURES}' else '0'}" + +# USE_V4L2_RENDERER for weston v4l2-renderer +USE_V4L2_RENDERER = "${@'1' if 'v4l2-renderer' in '${DISTRO_FEATURES}' else '0'}" diff --git a/meta-rcar-gen3/include/omx-control.inc b/meta-rcar-gen3/include/omx-control.inc new file mode 100644 index 0000000..6c630f8 --- /dev/null +++ b/meta-rcar-gen3/include/omx-control.inc @@ -0,0 +1,129 @@ +## Additional configuration in OMX module, include +# USE_H263D_OMX for OMX Media Component H263 OMX Library +USE_H263D_OMX = "${@'1' if 'h263dec_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_H264D_OMX for OMX Media Component H264 OMX Library +USE_H264D_OMX = "${@'1' if 'h264dec_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_H264E_OMX for OMX Media Component H264 Encoder Library +USE_H264E_OMX = "${@'1' if 'h264enc_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_H265D_OMX for OMX Media Component H265 OMX Library +USE_H265D_OMX = "${@'1' if 'h265dec_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_MPEG2_OMX for OMX Media Component MPEG2 OMX Library +USE_MPEG2D_OMX = "${@'1' if 'mpeg2dec_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_MPEG4D_OMX for OMX Media Component MPEG4 Decoder Library +USE_MPEG4D_OMX = "${@'1' if 'mpeg4dec_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_VC1D_OMX for OMX Media Component VC-1 Decoder Library +USE_VC1D_OMX = "${@'1' if 'vc1dec_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_DIVXD_OMX for OMX Media Component DivX Decoder Library +USE_DIVXD_OMX = "${@'1' if 'divxdec_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_RVD_OMX for OMX Media Component RealVideo Decoder Library +USE_RVD_OMX = "${@'1' if 'rvdec_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_AACLCD_OMX for OMX Media Component AACLC OMX Library +USE_AACLCD_OMX = "${@'1' if 'aaclcdec_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_AACPV2D_OMX for OMX Media Component aacPlus V2 OMX Library +USE_AACPV2D_OMX = "${@'1' if 'aacpv2dec_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_MP3D_OMX for OMX Media Component MP3 OMX Library +USE_MP3D_OMX = "${@'1' if 'mp3dec_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_WMAD_OMX for OMX Media Component WMA OMX Library +USE_WMAD_OMX = "${@'1' if 'wmadec_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_ALACD_OMX for OMX Media Component ALAC decoder Library +USE_ALACD_OMX = "${@'1' if 'alacdec_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_FLACD_OMX for OMX Media Component FLAC decoder Library +USE_FLACD_OMX = "${@'1' if 'flacdec_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_DDD_OMX for OMX Media Component Dolby(R) Digital decoder Library +USE_DDD_OMX = "${@'1' if 'dddec_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_AACLCE_OMX for OMX Media Component AAC-LC encoder Library +USE_AACLCE_OMX = "${@'1' if 'aaclcenc_lib' in '${DISTRO_FEATURES}' else '0'}" + +# USE_AACLC_MDW for AACLC MDW Library +USE_AACLC_MDW = "${@'1' if 'aaclcdec_mdw' in '${DISTRO_FEATURES}' else '0'}" + +# USE_AACPV2_MDW for aacPlus V2 MDW Library +USE_AACPV2_MDW = "${@'1' if 'aacpv2dec_mdw' in '${DISTRO_FEATURES}' else '0'}" + +# USE_MP3_MDW for MP3 MDW Library +USE_MP3_MDW = "${@'1' if 'mp3dec_mdw' in '${DISTRO_FEATURES}' else '0'}" + +# USE_WMA_MDW for WMA MDW Library +USE_WMA_MDW = "${@'1' if 'wmadec_mdw' in '${DISTRO_FEATURES}' else '0'}" + +# USE_DD_MDW for Dolby(R) Digital MDW Library +USE_DD_MDW = "${@'1' if 'dddec_mdw' in '${DISTRO_FEATURES}' else '0'}" + +# USE_AACLCE_OMX for AAC-LC encoder middleware Library +USE_AACLCE_MDW = "${@'1' if 'aaclcenc_mdw' in '${DISTRO_FEATURES}' else '0'}" + +# OMX Video Decoder Flag list +LIST_OMX_VIDEO_DEC_FLAG = " \ + ${USE_H263D_OMX} \ + ${USE_H264D_OMX} \ + ${USE_H265D_OMX} \ + ${USE_MPEG2D_OMX} \ + ${USE_MPEG4D_OMX} \ + ${USE_VC1D_OMX} \ + ${USE_DIVXD_OMX} \ + ${USE_RVD_OMX} \ +" + +# OMX Video Encoder Flag list +LIST_OMX_VIDEO_ENC_FLAG = " \ + ${USE_H264E_OMX} \ +" + +# OMX Audio Flag list (except MDW) +LIST_OMX_AUDIO_FLAG = " \ + ${USE_AACLCD_OMX} \ + ${USE_AACPV2D_OMX} \ + ${USE_MP3D_OMX} \ + ${USE_WMAD_OMX} \ + ${USE_AACLCE_OMX} \ + ${USE_ALACD_OMX} \ + ${USE_FLACD_OMX} \ + ${USE_DDD_OMX} \ +" + +# Audio M/W Flag list +LIST_AUDIO_MDW_FLAG = " \ + ${USE_AACLC_MDW} \ + ${USE_AACPV2_MDW} \ + ${USE_MP3_MDW} \ + ${USE_WMA_MDW} \ + ${USE_DD_MDW} \ + ${USE_AACLCE_MDW} \ +" + +# USE_OMX_VIDEO_DEC for Video Decoder Common Libs +USE_VIDEO_DEC = "${@'1' if '1' in '${LIST_OMX_VIDEO_DEC_FLAG}' else '0'}" + +# USE_OMX_VIDEO_DEC for Video Encoder Common Libs +USE_VIDEO_ENC = "${@'1' if '1' in '${LIST_OMX_VIDEO_ENC_FLAG}' else '0'}" + +# USE_VIDEO_OMX for Enable/Disable OMX Video +USE_VIDEO_OMX = "${@'1' if '1' in '${USE_VIDEO_DEC} ${USE_VIDEO_ENC}' else '0'}" + +# USE_AUDIO_OMX for Audio Common Libs +USE_AUDIO_OMX = "${@'1' if '1' in '${LIST_OMX_AUDIO_FLAG}' else '0'}" + +# USE_OMX_COMMON for OMX Common Libs +USE_OMX_COMMON = "${@'1' if '1' in '${USE_VIDEO_OMX} ${USE_AUDIO_OMX}' else '0'}" + +# USE_OMX_USER_MODULE for OMX User Module +# Note) List of USE_OMX_COMMON = {USE_VIDEO_OMX} + {USE_AUDIO_OMX} +USE_OMX_USER_MODULE = "${@'1' if '1' in '${USE_OMX_COMMON} ${LIST_AUDIO_MDW_FLAG}' else '0'}" + +USE_OMX_EVA_PKG = "${@'1' if 'use_eva_pkg' in '${DISTRO_FEATURES}' else '0'}" diff --git a/meta-rcar-gen3/include/rcar-gen3-modules-common.inc b/meta-rcar-gen3/include/rcar-gen3-modules-common.inc new file mode 100644 index 0000000..7cd0845 --- /dev/null +++ b/meta-rcar-gen3/include/rcar-gen3-modules-common.inc @@ -0,0 +1,9 @@ +export BUILDDIR = "${STAGING_INCDIR}/.." +export INCSHARED = "${STAGING_INCDIR}" +export LIBSHARED = "${STAGING_LIBDIR}" +export KERNELSRC = "${STAGING_KERNEL_DIR}" +export CROSS_COMPILE = "${TARGET_PREFIX}" +export KERNELDIR = "${STAGING_KERNEL_DIR}" +export LDFLAGS = "" +export CP = "cp" +require include/rcar-gen3-path-common.inc diff --git a/meta-rcar-gen3/include/rcar-gen3-path-common.inc b/meta-rcar-gen3/include/rcar-gen3-path-common.inc new file mode 100644 index 0000000..d01a044 --- /dev/null +++ b/meta-rcar-gen3/include/rcar-gen3-path-common.inc @@ -0,0 +1 @@ +export RENESAS_DATADIR = "/usr" diff --git a/meta-rcar-gen3/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bb b/meta-rcar-gen3/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bb new file mode 100644 index 0000000..11ac5ec --- /dev/null +++ b/meta-rcar-gen3/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_git.bb @@ -0,0 +1,60 @@ +DESCRIPTION = "ARM Trusted Firmware" + +LICENSE = "BSD" +LIC_FILES_CHKSUM = "file://license.md;md5=829bdeb34c1d9044f393d5a16c068371" + +PACKAGE_ARCH = "${MACHINE_ARCH}" + +inherit deploy +require include/multimedia-control.inc + +S = "${WORKDIR}/git" + +BRANCH = "rcar_gen3" +SRC_URI = "git://github.com/renesas-rcar/arm-trusted-firmware.git;branch=${BRANCH}" +SRCREV = "b330e0e1e4ecde33da7d2a1a4660391708971c3a" + +PV = "v1.3+renesas+git${SRCPV}" + +COMPATIBLE_MACHINE = "(salvator-x|ulcb)" +PLATFORM = "rcar" +ATFW_OPT_LOSSY = "${@base_conditional("USE_MULTIMEDIA", "1", "RCAR_LOSSY_ENABLE=1", "", d)}" +ATFW_OPT_r8a7795 = "LSI=H3 RCAR_DRAM_SPLIT=1 ${ATFW_OPT_LOSSY}" +ATFW_OPT_r8a7796 = "LSI=M3 RCAR_DRAM_SPLIT=2 ${ATFW_OPT_LOSSY}" +ATFW_OPT_append_ulcb = " RCAR_GEN3_ULCB=1 PMIC_LEVEL_MODE=0" + +SRC_URI_append = " \ + file://0001-Boot-Normal-World-in-EL2.patch \ +" + +# requires CROSS_COMPILE set by hand as there is no configure script +export CROSS_COMPILE="${TARGET_PREFIX}" + +# Let the Makefile handle setting up the CFLAGS and LDFLAGS as it is a standalone application +CFLAGS[unexport] = "1" +LDFLAGS[unexport] = "1" +AS[unexport] = "1" +LD[unexport] = "1" + +do_compile() { + oe_runmake bl2 bl31 dummytool PLAT=${PLATFORM} ${ATFW_OPT} +} + +# do_install() nothing +do_install[noexec] = "1" + +do_deploy() { + # Create deploy folder + install -d ${DEPLOYDIR} + + # Copy IPL to deploy folder + install -m 0644 ${S}/build/${PLATFORM}/release/bl2/bl2.elf ${DEPLOYDIR}/bl2-${MACHINE}.elf + install -m 0644 ${S}/build/${PLATFORM}/release/bl2.bin ${DEPLOYDIR}/bl2-${MACHINE}.bin + install -m 0644 ${S}/build/${PLATFORM}/release/bl2.srec ${DEPLOYDIR}/bl2-${MACHINE}.srec + install -m 0644 ${S}/build/${PLATFORM}/release/bl31/bl31.elf ${DEPLOYDIR}/bl31-${MACHINE}.elf + install -m 0644 ${S}/build/${PLATFORM}/release/bl31.bin ${DEPLOYDIR}/bl31-${MACHINE}.bin + install -m 0644 ${S}/build/${PLATFORM}/release/bl31.srec ${DEPLOYDIR}/bl31-${MACHINE}.srec + install -m 0644 ${S}/tools/dummy_create/bootparam_sa0.srec ${DEPLOYDIR}/bootparam_sa0.srec + install -m 0644 ${S}/tools/dummy_create/cert_header_sa6.srec ${DEPLOYDIR}/cert_header_sa6.srec +} +addtask deploy before do_build after do_compile diff --git a/meta-rcar-gen3/recipes-bsp/arm-trusted-firmware/files/0001-Boot-Normal-World-in-EL2.patch b/meta-rcar-gen3/recipes-bsp/arm-trusted-firmware/files/0001-Boot-Normal-World-in-EL2.patch new file mode 100644 index 0000000..6ce9c0f --- /dev/null +++ b/meta-rcar-gen3/recipes-bsp/arm-trusted-firmware/files/0001-Boot-Normal-World-in-EL2.patch @@ -0,0 +1,28 @@ +From c97f38b09f8b7d9c57a6e6f500c6ba8f7abd9914 Mon Sep 17 00:00:00 2001 +From: Michele Paolino <m.paolino@virtualopensystems.com> +Date: Fri, 19 May 2017 14:50:55 +0200 +Subject: [PATCH] Boot Normal World in EL2 + +This patch configures ATF (SPSR register) to boot BL33 in EL2. + +Signed-off-by: Michele Paolino <m.paolino@virtualopensystems.com> +--- + plat/renesas/rcar/platform.mk | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/plat/renesas/rcar/platform.mk b/plat/renesas/rcar/platform.mk +index ef7bf0f..06bc592 100644 +--- a/plat/renesas/rcar/platform.mk ++++ b/plat/renesas/rcar/platform.mk +@@ -186,7 +186,7 @@ $(eval $(call add_define,RCAR_DRAM_SPLIT)) + + # Process RCAR_BL33_EXECUTION_EL flag + ifndef RCAR_BL33_EXECUTION_EL +-RCAR_BL33_EXECUTION_EL := 0 ++RCAR_BL33_EXECUTION_EL := 1 + endif + $(eval $(call add_define,RCAR_BL33_EXECUTION_EL)) + +-- +2.7.4 + diff --git a/meta-rcar-gen3/recipes-bsp/glmark2/glmark2_git.bbappend b/meta-rcar-gen3/recipes-bsp/glmark2/glmark2_git.bbappend new file mode 100644 index 0000000..c30a227 --- /dev/null +++ b/meta-rcar-gen3/recipes-bsp/glmark2/glmark2_git.bbappend @@ -0,0 +1,8 @@ +PACKAGECONFIG[drm-gl] = ",,virtual/libgl libdrm libgbm" +PACKAGECONFIG[drm-gles2] = ",,virtual/libgles2 libdrm libgbm" +PACKAGECONFIG[wayland-gl] = ",,virtual/libgl wayland wayland-kms" +PACKAGECONFIG[wayland-gles2] = ",,virtual/libgles2 wayland wayland-kms" + +PACKAGECONFIG = "${@bb.utils.contains('DISTRO_FEATURES', 'x11 opengl', 'x11-gles2', '', d)} \ + ${@bb.utils.contains('DISTRO_FEATURES', 'wayland opengl', 'wayland-gles2', '', d)} \ +" diff --git a/meta-rcar-gen3/recipes-bsp/optee/optee-client/0001-optee-client-Respect-LDFLAGS-set-from-OE-build.patch b/meta-rcar-gen3/recipes-bsp/optee/optee-client/0001-optee-client-Respect-LDFLAGS-set-from-OE-build.patch new file mode 100644 index 0000000..39d6d31 --- /dev/null +++ b/meta-rcar-gen3/recipes-bsp/optee/optee-client/0001-optee-client-Respect-LDFLAGS-set-from-OE-build.patch @@ -0,0 +1,57 @@ +From 4ee8c61a0b85cc605993beaa117c46c9cbbca496 Mon Sep 17 00:00:00 2001 +From: Stephen Lawrence <stephen.lawrence@renesas.com> +Date: Wed, 26 Jul 2017 17:20:22 +0100 +Subject: [PATCH] optee-client: Respect LDFLAGS set from OE build + +Backport upstream fix to unify LFLAGS/LDFLAGS variable names. + +Fixes: + ERROR: optee-client-1.1.0+renesas+gitAUTOINC+db9c64d458-r0 do_package_qa: QA Issue: No GNU_HASH in the elf binary: 'optee-client/1.1.0+renesas+gitAUTOINC+db9c64d458-r0/packages-split/optee-client/usr/bin/tee-supplicant' + No GNU_HASH in the elf binary: 'optee-client/1.1.0+renesas+gitAUTOINC+db9c64d458-r0/packages-split/optee-client/usr/lib/libteec.so.1.0' [ldflags] + ERROR: optee-client-1.1.0+renesas+gitAUTOINC+db9c64d458-r0 do_package_qa: QA run found fatal errors. Please consider fixing them. + ERROR: optee-client-1.1.0+renesas+gitAUTOINC+db9c64d458-r0 do_package_qa: Function failed: do_package_qa + +(From meta-linaro rev: a7131d143db3b51a49c88b5293b6aadcce0538d4) + +Signed-off-by: Stephen Lawrence <stephen.lawrence@renesas.com> +--- + libteec/Makefile | 2 +- + tee-supplicant/Makefile | 4 ++-- + 2 files changed, 3 insertions(+), 3 deletions(-) + +diff --git a/libteec/Makefile b/libteec/Makefile +index 9a69216..2e6ca8f 100644 +--- a/libteec/Makefile ++++ b/libteec/Makefile +@@ -28,7 +28,7 @@ TEEC_CFLAGS := $(addprefix -I, $(TEEC_INCLUDES)) $(CFLAGS) -D_GNU_SOURCE \ + -DDEBUGLEVEL_$(CFG_TEE_CLIENT_LOG_LEVEL) \ + -DBINARY_PREFIX=\"TEEC\" + +-TEEC_LFLAGS := -lpthread ++TEEC_LFLAGS := $(LDFLAGS) -lpthread + TEEC_LIBRARY := $(OUT_DIR)/$(LIB_MAJ_MIN) + + libteec: $(TEEC_LIBRARY) +diff --git a/tee-supplicant/Makefile b/tee-supplicant/Makefile +index 4f451f1..16816bb 100644 +--- a/tee-supplicant/Makefile ++++ b/tee-supplicant/Makefile +@@ -37,13 +37,13 @@ ifeq ($(RPMB_EMU),1) + TEES_CFLAGS += -DRPMB_EMU=1 + endif + TEES_FILE := $(OUT_DIR)/$(PACKAGE_NAME) +-TEES_LDFLAGS := -L$(OUT_DIR)/../libteec -lteec ++TEES_LFLAGS := $(LDFLAGS) -L$(OUT_DIR)/../libteec -lteec + + tee-supplicant: $(TEES_FILE) + + $(TEES_FILE): $(TEES_OBJS) + @echo " LD $@" +- $(VPREFIX)$(CC) -o $@ $+ $(TEES_LDFLAGS) ++ $(VPREFIX)$(CC) -o $@ $+ $(TEES_LFLAGS) + @echo "" + + $(TEES_OBJ_DIR)/%.o: $(TEES_SRC_DIR)/%.c +-- +1.9.1 + diff --git a/meta-rcar-gen3/recipes-bsp/optee/optee-client/optee.service b/meta-rcar-gen3/recipes-bsp/optee/optee-client/optee.service new file mode 100644 index 0000000..4396f9f --- /dev/null +++ b/meta-rcar-gen3/recipes-bsp/optee/optee-client/optee.service @@ -0,0 +1,11 @@ +[Unit] +Description=optee services + +[Service] +ExecStartPre=/sbin/modprobe -q optee_armtz +ExecStart=/usr/bin/tee-supplicant +ExecStop=/usr/bin/killall -s KILL tee-supplicant +ExecStopPost=/sbin/modprobe -r optee_armtz + +[Install] +WantedBy=multi-user.target diff --git a/meta-rcar-gen3/recipes-bsp/optee/optee-client_git.bb b/meta-rcar-gen3/recipes-bsp/optee/optee-client_git.bb new file mode 100644 index 0000000..f528ad5 --- /dev/null +++ b/meta-rcar-gen3/recipes-bsp/optee/optee-client_git.bb @@ -0,0 +1,59 @@ +DESCRIPTION = "OP-TEE Client" +LICENSE = "BSD-2-Clause" + +LIC_FILES_CHKSUM = "file://LICENSE;md5=69663ab153298557a59c67a60a743e5b" +PR = "r0" +PV = "1.1.0+renesas+git${SRCPV}" +BRANCH = "master" +SRC_URI = "git://github.com/OP-TEE/optee_client.git;branch=${BRANCH}" +SRCREV = "db9c64d45818d146200297eaaedbd421a8b59e3a" + +SRC_URI += " \ + file://optee.service \ + file://0001-optee-client-Respect-LDFLAGS-set-from-OE-build.patch \ +" + +inherit systemd +SYSTEMD_SERVICE_${PN} = "optee.service" + +COMPATIBLE_MACHINE = "salvator-x|h3ulcb|m3ulcb" + +PACKAGE_ARCH = "${MACHINE_ARCH}" + +S = "${WORKDIR}/git" + +EXTRA_OEMAKE = "RPMB_EMU=0" + +do_install () { + # Create destination directories + install -d ${D}/${libdir} + install -d ${D}/${includedir} + + # Install library + install -m 0755 ${S}/out/export/lib/libteec.so.1.0 ${D}/${libdir} + + # Create symbolic link + cd ${D}/${libdir} + ln -sf libteec.so.1.0 libteec.so.1 + ln -sf libteec.so.1 libteec.so + + # Install header files + install -m 0644 ${S}/out/export/include/* ${D}/${includedir} + + # Install systemd service configure file for OP-TEE client + if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then + install -d ${D}/${systemd_system_unitdir} + install -m 0644 ${WORKDIR}/optee.service ${D}/${systemd_system_unitdir} + fi +} + +# install the tee-supplicant for 64 bit only. +do_install_append_aarch64 () { + # Create destination directory + install -d ${D}/${bindir} + + # Install binary to bindir + install -m 0755 ${S}/out/export/bin/tee-supplicant ${D}/${bindir} +} + +RPROVIDES_${PN} += "optee-client" diff --git a/meta-rcar-gen3/recipes-bsp/optee/optee-os_git.bb b/meta-rcar-gen3/recipes-bsp/optee/optee-os_git.bb new file mode 100644 index 0000000..bc26a46 --- /dev/null +++ b/meta-rcar-gen3/recipes-bsp/optee/optee-os_git.bb @@ -0,0 +1,67 @@ +DESCRIPTION = "OP-TEE OS" + +LICENSE = "BSD-2-Clause & BSD-3-Clause" +LIC_FILES_CHKSUM = " \ + file://LICENSE;md5=69663ab153298557a59c67a60a743e5b \ + file://lib/libpng/LICENSE;md5=06a1b6fde6d93170bb72201c8000bf3d \ + file://${WORKDIR}/git_official/LICENSE;md5=69663ab153298557a59c67a60a743e5b \ + file://${WORKDIR}/git_official/lib/libpng/LICENSE;md5=06a1b6fde6d93170bb72201c8000bf3d \ +" + +PACKAGE_ARCH = "${MACHINE_ARCH}" + +inherit deploy pythonnative + +PV = "2.2.0+renesas+git${SRCPV}" + +BRANCH = "rcar_gen3" +SRCREV_renesas = "1e959b66e877546d83b3ac7fb5d10baa4a034acc" +SRCREV_officialgit = "c0c5d399d81a0669f5c8e3bcb20039d65649a78d" +SRCREV_FORMAT = "renesas_officialgit" + +SRC_URI = " \ + git://github.com/renesas-rcar/optee_os.git;branch=${BRANCH};name=renesas \ + git://github.com/OP-TEE/optee_os.git;branch=master;name=officialgit;destsuffix=git_official \ +" + +COMPATIBLE_MACHINE = "(salvator-x|h3ulcb|m3ulcb)" +PLATFORM = "rcar" + +DEPENDS = "python-wand-native python-pycrypto-native" + +# Needed so that python-wand can find the installed imagemagick install. +export MAGICK_HOME="${STAGING_DIR_NATIVE}${prefix}" + +export CROSS_COMPILE64="${TARGET_PREFIX}" + +# Let the Makefile handle setting up the flags as it is a standalone application +LD[unexport] = "1" +LDFLAGS[unexport] = "1" +export CCcore="${CC}" +export LDcore="${LD}" +libdir[unexport] = "1" + +S = "${WORKDIR}/git" +EXTRA_OEMAKE = "-e MAKEFLAGS=" + +do_configure() { + cp -r ${WORKDIR}/git_official/core/lib/libtomcrypt ${B}/core/lib/. +} + +do_compile() { + oe_runmake PLATFORM=${PLATFORM} CFG_ARM64_core=y +} + +# do_install() nothing +do_install[noexec] = "1" + +do_deploy() { + # Create deploy folder + install -d ${DEPLOYDIR} + + # Copy TEE OS to deploy folder + install -m 0644 ${S}/out/arm-plat-${PLATFORM}/core/tee.elf ${DEPLOYDIR}/tee-${MACHINE}.elf + install -m 0644 ${S}/out/arm-plat-${PLATFORM}/core/tee.bin ${DEPLOYDIR}/tee-${MACHINE}.bin + install -m 0644 ${S}/out/arm-plat-${PLATFORM}/core/tee.srec ${DEPLOYDIR}/tee-${MACHINE}.srec +} +addtask deploy before do_build after do_compile diff --git a/meta-rcar-gen3/recipes-bsp/qos/qosif-tp-user-module.bb b/meta-rcar-gen3/recipes-bsp/qos/qosif-tp-user-module.bb new file mode 100644 index 0000000..8fb0198 --- /dev/null +++ b/meta-rcar-gen3/recipes-bsp/qos/qosif-tp-user-module.bb @@ -0,0 +1,36 @@ +DESCRIPTION = "QOS Interface test app for R-Car Gen3" + +require qosif.inc + +DEPENDS = "qosif-user-module" +PN = "qosif-tp-user-module" +PR = "r0" + +S = "${WORKDIR}/git" +QOSIF_TP_DIR = "qos_if-tp-user/files/qos_if" + +includedir = "${RENESAS_DATADIR}/include" + +do_compile() { + cd ${S}/${QOSIF_TP_DIR} + oe_runmake +} + +do_install() { + # Create destination directory + install -d ${D}${RENESAS_DATADIR}/bin/ + + # Copy user test program + install -m 755 ${S}/${QOSIF_TP_DIR}/qos_tp ${D}${RENESAS_DATADIR}/bin/ +} + +PACKAGES = " \ + ${PN} \ + ${PN}-dbg \ +" + +FILES_${PN} = "${RENESAS_DATADIR}/bin/qos_tp" + +FILES_${PN}-dbg = " \ + ${RENESAS_DATADIR}/bin/.debug/* \ +" diff --git a/meta-rcar-gen3/recipes-bsp/qos/qosif-user-module.bb b/meta-rcar-gen3/recipes-bsp/qos/qosif-user-module.bb new file mode 100644 index 0000000..c836fe3 --- /dev/null +++ b/meta-rcar-gen3/recipes-bsp/qos/qosif-user-module.bb @@ -0,0 +1,48 @@ +DESCRIPTION = "QOS Interface library for R-Car Gen3" + +require qosif.inc + +DEPENDS = "kernel-module-qos" +PN = "qosif-user-module" +PR = "r0" + +S = "${WORKDIR}/git" +QOSIF_LIB_DIR = "qos_if-module/files/qos_if" + +EXTRA_OEMAKE = "ARCH=${TARGET_ARCH}" + +includedir = "${RENESAS_DATADIR}/include" + +do_compile() { + # Build shared library + cd ${S}/${QOSIF_LIB_DIR}/if + rm -rf ${S}/${QOSIF_LIB_DIR}/if/libqos.so* + oe_runmake +} + +do_install() { + # Create destination directories + install -d ${D}/${libdir} + install -d ${D}/${includedir} + + # Copy shared library + install -m 755 ${S}/${QOSIF_LIB_DIR}/if/libqos.so* ${D}/${libdir}/ + cd ${D}/${libdir}/ + ln -sf libqos.so.1.0.0 libqos.so.1 + ln -sf libqos.so.1 libqos.so + + # Install shared header file + install -m 644 ${S}/${QOSIF_LIB_DIR}/include/qos_public.h ${D}/${includedir}/ +} + +PACKAGES = " \ + ${PN} \ + ${PN}-dev \ + ${PN}-dbg \ +" + +FILES_${PN} = " \ + ${libdir}/libqos.so* \ +" + +INSANE_SKIP_${PN} = "dev-so" diff --git a/meta-rcar-gen3/recipes-bsp/qos/qosif.inc b/meta-rcar-gen3/recipes-bsp/qos/qosif.inc new file mode 100644 index 0000000..0b6cf90 --- /dev/null +++ b/meta-rcar-gen3/recipes-bsp/qos/qosif.inc @@ -0,0 +1,15 @@ +LICENSE = "MIT" +LIC_FILES_CHKSUM = " \ + file://COPYING.MIT;md5=96659f2a7571bfa27483882a653c3bb9 \ +" + +require include/rcar-gen3-modules-common.inc + +QOSIF_LIB_URL = "git://github.com/renesas-rcar/qos_lib.git" +BRANCH = "rcar-gen3" +SRCREV = "84ea8d562a55d1fbd7b6acf08a498d33a92dc392" + +SRC_URI = "${QOSIF_LIB_URL};branch=${BRANCH}" + +# This module is machine specific. +PACKAGE_ARCH = "${MACHINE_ARCH}" diff --git a/meta-rcar-gen3/recipes-bsp/u-boot/u-boot-common_2015.04.inc b/meta-rcar-gen3/recipes-bsp/u-boot/u-boot-common_2015.04.inc new file mode 100644 index 0000000..1feba52 --- /dev/null +++ b/meta-rcar-gen3/recipes-bsp/u-boot/u-boot-common_2015.04.inc @@ -0,0 +1,8 @@ +HOMEPAGE = "http://www.denx.de/wiki/U-Boot/WebHome" +SECTION = "bootloaders" + +LICENSE = "GPLv2+" +LIC_FILES_CHKSUM = "file://Licenses/README;md5=a2c678cfd4a4d97135585cad908541c6" +PE = "1" + +S = "${WORKDIR}/git" diff --git a/meta-rcar-gen3/recipes-bsp/u-boot/u-boot_2015.04.bb b/meta-rcar-gen3/recipes-bsp/u-boot/u-boot_2015.04.bb new file mode 100644 index 0000000..c1e10d5 --- /dev/null +++ b/meta-rcar-gen3/recipes-bsp/u-boot/u-boot_2015.04.bb @@ -0,0 +1,29 @@ +require recipes-bsp/u-boot/u-boot-common_${PV}.inc +require recipes-bsp/u-boot/u-boot.inc + +DEPENDS += "dtc-native" + +UBOOT_URL = "git://github.com/renesas-rcar/u-boot.git" +BRANCH = "v2015.04/rcar-3.5.6" + +LICENSE = "GPLv2+" +LIC_FILES_CHKSUM = "file://Licenses/README;md5=c7383a594871c03da76b3707929d2919" + +SRC_URI = "${UBOOT_URL};branch=${BRANCH}" +SRCREV = "2ecffb1f4ecac39c7889e8685f0ca9ce11bb7533" + +PV = "v2015.04+git${SRCPV}" + +EXTRA_OEMAKE_append = " KCFLAGS=-fgnu89-inline" + +UBOOT_SREC ?= "u-boot-elf.srec" +UBOOT_SREC_IMAGE ?= "u-boot-elf-${MACHINE}-${PV}-${PR}.srec" +UBOOT_SREC_SYMLINK ?= "u-boot-elf-${MACHINE}.srec" + +do_deploy_append() { + install -m 644 ${B}/${UBOOT_SREC} ${DEPLOYDIR}/${UBOOT_SREC_IMAGE} + cd ${DEPLOYDIR} + rm -f ${UBOOT_SREC} ${UBOOT_SREC_SYMLINK} + ln -sf ${UBOOT_SREC_IMAGE} ${UBOOT_SREC_SYMLINK} + ln -sf ${UBOOT_SREC_IMAGE} ${UBOOT_SREC} +} diff --git a/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-tp-user-module.bb b/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-tp-user-module.bb new file mode 100644 index 0000000..33a2d55 --- /dev/null +++ b/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-tp-user-module.bb @@ -0,0 +1,53 @@ +DESCRIPTION = "Linux ICCOM library test applications for Renesas R-Car Gen3" + +require iccom-user-module.inc +require include/multimedia-control.inc +require include/rcar-gen3-path-common.inc + +DEPENDS = " \ + kernel-module-iccom-mfis \ + iccom-user-module \ + ${@base_conditional('USE_MULTIMEDIA', '1', 'mmngr-user-module', '', d )} \ +" + +export USE_MMNGR="${USE_MULTIMEDIA}" + +PN = "iccom-tp-user-module" +PR = "r0" + +S = "${WORKDIR}/libiccom" + +do_compile() { + cd ${S}/sample_test + make + + cd ${S}/sample_test_fatal + make + + cd ${S}/sample_sharedmem + make + + cd ${S}/sample_lock + make +} + +do_install() { + # Create destination directory + install -d ${D}${RENESAS_DATADIR}/bin + + # Install test applications + install -m 755 ${S}/sample_test/sample_test ${D}${RENESAS_DATADIR}/bin/ + install -m 755 ${S}/sample_test_fatal/sample_test_fatal ${D}${RENESAS_DATADIR}/bin/ + install -m 755 ${S}/sample_sharedmem/sample_sharedmem ${D}${RENESAS_DATADIR}/bin/ + install -m 755 ${S}/sample_lock/sample_lock ${D}${RENESAS_DATADIR}/bin/ +} + +FILES_${PN} = " \ + ${RENESAS_DATADIR}/bin/sample_test \ + ${RENESAS_DATADIR}/bin/sample_test_fatal \ + ${RENESAS_DATADIR}/bin/sample_sharedmem \ + ${RENESAS_DATADIR}/bin/sample_lock \ +" + +# Skip debug split +INHIBIT_PACKAGE_DEBUG_SPLIT = "1" diff --git a/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-user-module.bb b/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-user-module.bb new file mode 100644 index 0000000..dc269b8 --- /dev/null +++ b/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-user-module.bb @@ -0,0 +1,41 @@ +DESCRIPTION = "Linux ICCOM library for Renesas R-Car Gen3" + +require iccom-user-module.inc +require include/rcar-gen3-path-common.inc + +DEPENDS = " \ + kernel-module-iccom-mfis \ +" + +PN = "iccom-user-module" +PR = "r0" + +# log output level : INFO=0 LOW=1 MED=2 HIGH=3 ERROR=4 FATAL=5 NONE=255 +# (the setting of 4 means that ERROR and FATAL log are output) +export MEG_LEV="4" + +S = "${WORKDIR}/libiccom" +B = "${S}/source" + +do_install() { + # Create destination directories + install -d ${D}/${libdir} + install -d ${D}${RENESAS_DATADIR}/include + + # Install library + install -m 755 ${B}/libiccom.so ${D}/${libdir}/ + + # Install shared header file + install -m 644 ${S}/include/iccom_if_app.h ${D}${RENESAS_DATADIR}/include/ +} + +FILES_${PN} = " \ + ${libdir}/libiccom.so \ +" + +FILES_${PN}-dev = " \ + ${RENESAS_DATADIR}/include/iccom_if_app.h \ +" + +# Skip debug split +INHIBIT_PACKAGE_DEBUG_SPLIT = "1" diff --git a/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-user-module.inc b/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-user-module.inc new file mode 100644 index 0000000..3cf8901 --- /dev/null +++ b/meta-rcar-gen3/recipes-connectivity/iccom-module/iccom-user-module.inc @@ -0,0 +1,9 @@ +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://COPYING.MIT;md5=442d4e9f738ff4d05ae6215ae20caa6c" + +require include/iccom-control.inc +inherit distro_features_check + +REQUIRED_DISTRO_FEATURES = "iccom" + +SRC_URI = "file://libiccom.tar.bz2" diff --git a/meta-rcar-gen3/recipes-core/base-files/base-files_%.bbappend b/meta-rcar-gen3/recipes-core/base-files/base-files_%.bbappend new file mode 100644 index 0000000..ffec1e1 --- /dev/null +++ b/meta-rcar-gen3/recipes-core/base-files/base-files_%.bbappend @@ -0,0 +1,5 @@ +require include/rcar-gen3-path-common.inc + +do_install_append () { + echo "export LD_LIBRARY_PATH=\"${RENESAS_DATADIR}/lib\"" >> ${D}${sysconfdir}/profile +} diff --git a/meta-rcar-gen3/recipes-core/images/core-image-minimal.bbappend b/meta-rcar-gen3/recipes-core/images/core-image-minimal.bbappend new file mode 100644 index 0000000..b1bd123 --- /dev/null +++ b/meta-rcar-gen3/recipes-core/images/core-image-minimal.bbappend @@ -0,0 +1 @@ +require recipes-graphics/images/core-image-renesas-base.inc diff --git a/meta-rcar-gen3/recipes-core/packagegroups/nativesdk-packagegroup-sdk-host.bbappend b/meta-rcar-gen3/recipes-core/packagegroups/nativesdk-packagegroup-sdk-host.bbappend new file mode 100644 index 0000000..dedfc6c --- /dev/null +++ b/meta-rcar-gen3/recipes-core/packagegroups/nativesdk-packagegroup-sdk-host.bbappend @@ -0,0 +1,4 @@ +# In YP2.1.2, nativesdk-wayland is lacking. +RDEPENDS_${PN}_append = " \ + ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'nativesdk-wayland nativesdk-wayland-dev', '', d)} \ +" diff --git a/meta-rcar-gen3/recipes-core/systemd/systemd_%.bbappend b/meta-rcar-gen3/recipes-core/systemd/systemd_%.bbappend new file mode 100644 index 0000000..f414a2b --- /dev/null +++ b/meta-rcar-gen3/recipes-core/systemd/systemd_%.bbappend @@ -0,0 +1 @@ +PACKAGECONFIG_remove = "timesyncd" diff --git a/meta-rcar-gen3/recipes-devtools/gcc/libgcc_%.bbappend b/meta-rcar-gen3/recipes-devtools/gcc/libgcc_%.bbappend new file mode 100644 index 0000000..cec33a6 --- /dev/null +++ b/meta-rcar-gen3/recipes-devtools/gcc/libgcc_%.bbappend @@ -0,0 +1 @@ +INSANE_SKIP_${PN} = "ldflags" diff --git a/meta-rcar-gen3/recipes-graphics/cogl/cogl-1.0_1.%.bbappend b/meta-rcar-gen3/recipes-graphics/cogl/cogl-1.0_1.%.bbappend new file mode 100644 index 0000000..f06b451 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/cogl/cogl-1.0_1.%.bbappend @@ -0,0 +1,4 @@ +require include/gles-control.inc +DEPENDS_append = " \ + ${@'gles-user-module libgbm' if '${USE_GLES_WAYLAND}' == '1' else ''} \ +" diff --git a/meta-rcar-gen3/recipes-graphics/drm/libdrm/fix_O_CLOEXEC_undeclared.patch b/meta-rcar-gen3/recipes-graphics/drm/libdrm/fix_O_CLOEXEC_undeclared.patch new file mode 100644 index 0000000..286e548 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/drm/libdrm/fix_O_CLOEXEC_undeclared.patch @@ -0,0 +1,24 @@ +drmdevice.c: define _GNU_SOURCE + +Include config.h to fix this build error with uclibc: + +libdrm-2.4.66/tests/drmdevice.c: In function 'main': +libdrm-2.4.66/tests/drmdevice.c:96:60: error: +'O_CLOEXEC' undeclared (first use in this function) +fd = open(devices[i]->nodes[j],O_RDONLY | O_CLOEXEC, 0); + +Upstream-Status: Pending + +Signed-off-by: Maxin B. John <maxin.john@intel.com> +--- +diff -Naur libdrm-2.4.66-orig/tests/drmdevice.c libdrm-2.4.66/tests/drmdevice.c +--- libdrm-2.4.66-orig/tests/drmdevice.c 2016-02-23 11:34:02.054904502 +0200 ++++ libdrm-2.4.66/tests/drmdevice.c 2016-02-23 11:35:34.371750383 +0200 +@@ -21,6 +21,7 @@ + * + */ + ++#include <config.h> + #include <stdio.h> + #include <stdlib.h> + #include <sys/stat.h> diff --git a/meta-rcar-gen3/recipes-graphics/drm/libdrm/installtests.patch b/meta-rcar-gen3/recipes-graphics/drm/libdrm/installtests.patch new file mode 100644 index 0000000..30e0a61 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/drm/libdrm/installtests.patch @@ -0,0 +1,15 @@ +tests: also install tests app + +Upstream-Status: Inappropriate [configuration] + +Signed-off-by: Yu Ke <ke.yu@intel.com> + +Index: libdrm-2.4.66/tests/Makefile.am +=================================================================== +--- libdrm-2.4.66.orig/tests/Makefile.am ++++ libdrm-2.4.66/tests/Makefile.am +@@ -73,3 +73,4 @@ TESTS += \ + endif + + check_PROGRAMS += $(TESTS) ++bin_PROGRAMS = $(check_PROGRAMS) diff --git a/meta-rcar-gen3/recipes-graphics/drm/libdrm_2.4.68.bb b/meta-rcar-gen3/recipes-graphics/drm/libdrm_2.4.68.bb new file mode 100644 index 0000000..758f801 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/drm/libdrm_2.4.68.bb @@ -0,0 +1,45 @@ +SUMMARY = "Userspace interface to the kernel DRM services" +DESCRIPTION = "The runtime library for accessing the kernel DRM services. DRM \ +stands for \"Direct Rendering Manager\", which is the kernel portion of the \ +\"Direct Rendering Infrastructure\" (DRI). DRI is required for many hardware \ +accelerated OpenGL drivers." +HOMEPAGE = "http://dri.freedesktop.org" +SECTION = "x11/base" +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://xf86drm.c;beginline=9;endline=32;md5=c8a3b961af7667c530816761e949dc71" +PROVIDES = "drm" +DEPENDS = "libpthread-stubs udev libpciaccess" + +SRC_URI = "http://dri.freedesktop.org/libdrm/${BP}.tar.bz2 \ + file://installtests.patch \ + file://fix_O_CLOEXEC_undeclared.patch \ + " + +SRC_URI[md5sum] = "bcc96848d969cecf28223f668eeff354" +SRC_URI[sha256sum] = "5b4bd9a5922929bc716411cb74061fbf31b06ba36feb89bc1358a91a8d0ca9df" + +inherit autotools pkgconfig + +EXTRA_OECONF += "--disable-cairo-tests \ + --enable-omap-experimental-api \ + --enable-install-test-programs \ + --disable-manpages \ + --disable-valgrind \ + " + +ALLOW_EMPTY_${PN}-drivers = "1" +PACKAGES =+ "${PN}-tests ${PN}-drivers ${PN}-radeon ${PN}-nouveau ${PN}-omap \ + ${PN}-intel ${PN}-exynos ${PN}-kms ${PN}-freedreno ${PN}-amdgpu" + +RRECOMMENDS_${PN}-drivers = "${PN}-radeon ${PN}-nouveau ${PN}-omap ${PN}-intel \ + ${PN}-exynos ${PN}-freedreno ${PN}-amdgpu" + +FILES_${PN}-tests = "${bindir}/*" +FILES_${PN}-radeon = "${libdir}/libdrm_radeon.so.*" +FILES_${PN}-nouveau = "${libdir}/libdrm_nouveau.so.*" +FILES_${PN}-omap = "${libdir}/libdrm_omap.so.*" +FILES_${PN}-intel = "${libdir}/libdrm_intel.so.*" +FILES_${PN}-exynos = "${libdir}/libdrm_exynos.so.*" +FILES_${PN}-kms = "${libdir}/libkms*.so.*" +FILES_${PN}-freedreno = "${libdir}/libdrm_freedreno.so.*" +FILES_${PN}-amdgpu = "${libdir}/libdrm_amdgpu.so.*" diff --git a/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module.bb b/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module.bb new file mode 100644 index 0000000..14a4c5d --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module.bb @@ -0,0 +1,135 @@ +require include/gles-control.inc +require include/rcar-gen3-path-common.inc + +DESCRIPTION = "PowerVR GPU user module" +LICENSE = "CLOSED" + +PN = "gles-user-module" +PR = "r0" + +COMPATIBLE_MACHINE = "(r8a7795|r8a7796)" +PACKAGE_ARCH = "${MACHINE_ARCH}" + +S = "${WORKDIR}/rogue" +GLES = "gsx" + +SRC_URI_r8a7795 = "file://r8a7795_linux_gsx_binaries_gles3.tar.bz2" +SRC_URI_r8a7796 = "file://r8a7796_linux_gsx_binaries_gles3.tar.bz2" +SRC_URI_append = " \ + file://change-shell.patch \ + file://rc.pvr.service \ +" + +inherit update-rc.d systemd + +INITSCRIPT_NAME = "pvrinit" +INITSCRIPT_PARAMS = "start 7 5 2 . stop 62 0 1 6 ." +SYSTEMD_SERVICE_${PN} = "rc.pvr.service" + +do_populate_lic[noexec] = "1" +do_compile[noexec] = "1" + +#The headers of gles-user-module need headers from virtual/mesa. +do_populate_sysroot[depends] += "virtual/mesa:do_populate_sysroot" + +do_install() { + # Install configuration files + install -d ${D}/${sysconfdir}/init.d + install -m 644 ${S}/${sysconfdir}/powervr.ini ${D}/${sysconfdir} + install -m 755 ${S}/${sysconfdir}/init.d/rc.pvr ${D}/${sysconfdir}/init.d/ + install -d ${D}/${sysconfdir}/udev/rules.d + install -m 644 ${S}/${sysconfdir}/udev/rules.d/72-pvr-seat.rules ${D}/${sysconfdir}/udev/rules.d/ + + # Install header files + install -d ${D}/${includedir}/EGL + install -m 644 ${S}/${includedir}/EGL/*.h ${D}/${includedir}/EGL/ + install -d ${D}/${includedir}/GLES2 + install -m 644 ${S}/${includedir}/GLES2/*.h ${D}/${includedir}/GLES2/ + install -d ${D}/${includedir}/GLES3 + install -m 644 ${S}/${includedir}/GLES3/*.h ${D}/${includedir}/GLES3/ + install -d ${D}/${includedir}/KHR + install -m 644 ${S}/${includedir}/KHR/khrplatform.h ${D}/${includedir}/KHR/khrplatform.h + + # Install pre-builded binaries + install -d ${D}/${libdir} + install -m 755 ${S}/${libdir}/*.so ${D}/${libdir}/ + install -d ${D}/${RENESAS_DATADIR}/bin + install -m 755 ${S}/usr/local/bin/dlcsrv_REL ${D}/${RENESAS_DATADIR}/bin/dlcsrv_REL + install -d ${D}/lib/firmware + install -m 644 ${S}/lib/firmware/* ${D}/lib/firmware/ + + # Install pkgconfig + install -d ${D}/${libdir}/pkgconfig + install -m 644 ${S}/${libdir}/pkgconfig/*.pc ${D}/${libdir}/pkgconfig/ + + # Create symbolic link + cd ${D}/${libdir} + ln -s libEGL.so libEGL.so.1 + ln -s libGLESv2.so libGLESv2.so.2 + + if [ "${USE_GLES_WAYLAND}" = "1" ]; then + # Set the "WindowSystem" parameter for wayland + if [ "${GLES}" = "gsx" ]; then + sed -i -e "s/WindowSystem=libpvrDRM_WSEGL.so/WindowSystem=libpvrWAYLAND_WSEGL.so/g" \ + ${D}/${sysconfdir}/powervr.ini + fi + fi + + # Install systemd service + if [ ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)} ]; then + install -d ${D}/${systemd_system_unitdir}/ + install -m 644 ${WORKDIR}/rc.pvr.service ${D}/${systemd_system_unitdir}/ + install -d ${D}/${exec_prefix}/bin + install -m 755 ${S}/${sysconfdir}/init.d/rc.pvr ${D}/${exec_prefix}/bin/pvrinit + fi +} + +PACKAGES = "\ + ${PN} \ + ${PN}-dev \ + ${PN}-debug \ +" + +FILES_${PN} = " \ + ${sysconfdir}/* \ + ${libdir}/* \ + /lib/firmware/rgx.fw* \ + ${RENESAS_DATADIR}/bin/* \ + ${exec_prefix}/bin/* \ +" + +FILES_${PN}-dev = " \ + ${includedir}/* \ + ${libdir}/pkgconfig/* \ +" + +PROVIDES = "virtual/libgles2" +FILES_${PN}-debug = " \ + ${RENESAS_DATADIR}/bin/dlcsrv_REL \ +" + +RPROVIDES_${PN} += " \ + ${GLES}-user-module \ + libgles2-mesa \ + libgles2-mesa-dev \ + libgles2 \ + libgles2-dev \ +" + +RDEPENDS_${PN} = " \ + kernel-module-gles \ + ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'libgbm wayland-kms', '', d)} \ +" + +INSANE_SKIP_${PN} = "ldflags build-deps file-rdeps" +INSANE_SKIP_${PN}-dev = "ldflags build-deps file-rdeps" +INSANE_SKIP_${PN} += "arch" +INSANE_SKIP_${PN}-dev += "arch" +INSANE_SKIP_${PN}-dbg = "arch" + +# Skip debug strip of do_populate_sysroot() +INHIBIT_SYSROOT_STRIP = "1" + +# Skip debug split and strip of do_package() +INHIBIT_PACKAGE_DEBUG_SPLIT = "1" +INHIBIT_PACKAGE_STRIP = "1" diff --git a/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/change-shell.patch b/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/change-shell.patch new file mode 100644 index 0000000..1dd22f4 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/change-shell.patch @@ -0,0 +1,8 @@ +--- a/etc/init.d/rc.pvr 2014-08-01 09:56:47.528824893 +0900 ++++ b/etc/init.d/rc.pvr 2014-08-01 09:56:55.744827677 +0900 +@@ -1,4 +1,4 @@ +-#!/bin/bash ++#!/bin/sh + ############################################################################ ### + #@Copyright Copyright (c) Imagination Technologies Ltd. All Rights Reserved + #@License Strictly Confidential. diff --git a/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/rc.pvr.service b/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/rc.pvr.service new file mode 100644 index 0000000..da7fc30 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module/rc.pvr.service @@ -0,0 +1,13 @@ +[Unit] +Description=PowerVR consumer services +Before=weston.service + +[Service] +ExecStart=/usr/bin/pvrinit start +ExecStop=/usr/bin/pvrinit stop +Type=oneshot +RemainAfterExit=yes + +[Install] +WantedBy=multi-user.target +RequiredBy=weston.service diff --git a/meta-rcar-gen3/recipes-graphics/images/core-image-renesas-base.inc b/meta-rcar-gen3/recipes-graphics/images/core-image-renesas-base.inc new file mode 100644 index 0000000..c1081ce --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/images/core-image-renesas-base.inc @@ -0,0 +1,67 @@ +require include/iccom-control.inc + +# Basic packages +IMAGE_INSTALL_append = " \ + bash \ + v4l-utils \ + i2c-tools \ +" + +# Support secure environment +IMAGE_INSTALL_append = " \ + optee-linuxdriver \ + optee-linuxdriver-armtz \ + optee-client \ +" + +# Add overrides for selection 32 bit or 64 bit target +OVERRIDES .= ":${TARGET_SYS}" + +# Qos user packages only supports 64bit. +QOS_USER_PKGS = "" +QOS_USER_PKGS_aarch64-poky-linux = " \ + qosif-user-module \ + qosif-tp-user-module \ +" + +# Installation for QoS packages +IMAGE_INSTALL_append = " \ + kernel-module-qos \ + ${QOS_USER_PKGS} \ +" + +# Renesas Basic packages for 32bit +BASIC_32BIT_PKGS = " \ + lib32-coreutils \ + lib32-libstdc++ \ + lib32-optee-client \ +" + +# Installation for 32bit packages +IMAGE_INSTALL_append = " \ + ${@base_conditional("USE_32BIT_PKGS", "1", "${BASIC_32BIT_PKGS}", "", d)} \ +" + +# Kernel modules of ICCOM +ICCOM_KERNEL_PKGS = " \ + kernel-module-iccom-mfis \ + kernel-module-iccom-hwspinlock-sample \ +" + +# User modules of ICCOM only supports 64bit +ICCOM_USER_PKGS = "" +ICCOM_USER_PKGS_aarch64-poky-linux = " \ + iccom-user-module \ + iccom-tp-user-module \ +" + +# ICCOM Packages +ICCOM_PKGS = " \ + ${ICCOM_KERNEL_PKGS} \ + ${ICCOM_USER_PKGS} \ +" + +# Installation for ICCOM Packages +IMAGE_INSTALL_append = " \ + ${@base_conditional("USE_ICCOM", "1", " ${ICCOM_PKGS}", "", d)} \ +" diff --git a/meta-rcar-gen3/recipes-graphics/images/core-image-renesas-mmp-base.inc b/meta-rcar-gen3/recipes-graphics/images/core-image-renesas-mmp-base.inc new file mode 100644 index 0000000..7c85d04 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/images/core-image-renesas-mmp-base.inc @@ -0,0 +1,96 @@ +require include/multimedia-control.inc +require include/cms-control.inc +require include/adsp-control.inc +require include/dtv-dvd-control.inc +require include/avb-control.inc +require include/omx-control.inc + +# Common Multi Media Packages (MMP) +MULTIMEDIA_PKGS = " \ + packagegroup-multimedia-kernel-modules \ + packagegroup-multimedia-libs \ +" + +# MMP test Packages +MULTIMEDIA_TP_PKGS = " \ + vspmif-tp-user-module \ +" + +# OMX MMP Packages +OMX_MULTIMEDIA_PKGS = " \ + omx-user-module \ +" + +# CMS MMP Packages +CMS_MULTIMEDIA_PKGS = " \ + cms-user-module \ +" + +# Kernel modules of DTV +DTV_KERNEL_PKGS = " \ + kernel-module-scu-src \ + kernel-module-ssp \ + kernel-module-tddmac \ + kernel-module-tsif \ +" + +# DTV Packages +DTV_PKGS = " \ + ${DTV_KERNEL_PKGS} \ + dtv-user-module \ +" + +# DVD Packages +DVD_PKGS = " \ + dvd-user-module \ +" + +# ADSP Packages +ADSP_PKGS = " \ + kernel-module-xtensa-hifi \ + adsp-if-module \ + adsp-fw-module \ +" + +# Kernel modules of AVB +AVB_KERNEL_PKGS = " \ + kernel-module-avb-streaming \ + kernel-module-avb-mch \ + kernel-module-avb-mse \ +" + +# AVB Packages +AVB_PKGS = " \ + ${AVB_KERNEL_PKGS} \ + avbtool \ + linuxptp \ + open-avb-mrpd \ + open-avb-gptp \ + open-avb-maap \ + avb-demoapps-avblauncher \ + avb-demoapps-mrpdummy \ + avb-demoapps-simple \ +" + +# Renesas MMP 32bit packages +MMP_32BIT_PKGS = " \ + ${@base_conditional("USE_MULTIMEDIA", "1", "lib32-packagegroup-multimedia-libs lib32-omx-user-module", "", d)} \ + ${@base_conditional("USE_MULTIMEDIA_TP", "1", "lib32-vspmif-tp-user-module", "", d)} \ + ${@base_conditional("USE_CMS", "1", "lib32-cms-user-module", "", d)} \ + ${@base_conditional("USE_DTV", "1", "lib32-dtv-user-module", "", d)} \ + ${@base_conditional("USE_DVD", "1", "lib32-dvd-user-module", "", d)} \ + ${@base_conditional("USE_ADSP", "1", "lib32-adsp-if-module", "", d)} \ +" + +# Install pkg selection +IMAGE_INSTALL_append = " \ + ${@base_conditional("USE_MULTIMEDIA", "1", " ${MULTIMEDIA_PKGS}", "", d)} \ + ${@base_conditional("USE_MULTIMEDIA_TP", "1", " ${MULTIMEDIA_TP_PKGS}", "", d)} \ + ${@base_conditional("USE_OMX_USER_MODULE", "1", " ${OMX_MULTIMEDIA_PKGS}", "", d)} \ + ${@base_conditional("USE_CMS", "1", " ${CMS_MULTIMEDIA_PKGS}", "", d)} \ + ${@base_conditional("USE_DTV", "1", " ${DTV_PKGS}", "", d)} \ + ${@base_conditional("USE_DVD", "1", " ${DVD_PKGS}", "", d)} \ + ${@base_conditional("USE_ADSP", "1", " ${ADSP_PKGS}", "", d)} \ + ${@base_conditional("USE_AVB", "1", " ${AVB_PKGS}", "", d)} \ + ${@base_conditional("USE_32BIT_MMP", "1", " ${MMP_32BIT_PKGS}", "", d)} \ +" diff --git a/meta-rcar-gen3/recipes-graphics/images/core-image-weston-sdk.bb b/meta-rcar-gen3/recipes-graphics/images/core-image-weston-sdk.bb new file mode 100644 index 0000000..fd4e6a0 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/images/core-image-weston-sdk.bb @@ -0,0 +1,15 @@ +require recipes-graphics/images/core-image-weston.bb +require core-image-renesas-base.inc +require core-image-weston.inc + +DESCRIPTION = "Image with weston support that includes everything within \ +core-image-weston plus meta-toolchain, development headers and libraries to \ +form a standalone SDK." + +IMAGE_FEATURES += " \ + dev-pkgs tools-sdk \ + tools-debug debug-tweaks \ + ssh-server-openssh \ +" + +IMAGE_INSTALL_append = " kernel-devsrc ltp" diff --git a/meta-rcar-gen3/recipes-graphics/images/core-image-weston.bbappend b/meta-rcar-gen3/recipes-graphics/images/core-image-weston.bbappend new file mode 100644 index 0000000..e30bc2e --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/images/core-image-weston.bbappend @@ -0,0 +1,2 @@ +require core-image-renesas-base.inc +require core-image-weston.inc diff --git a/meta-rcar-gen3/recipes-graphics/images/core-image-weston.inc b/meta-rcar-gen3/recipes-graphics/images/core-image-weston.inc new file mode 100644 index 0000000..eb4f1b8 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/images/core-image-weston.inc @@ -0,0 +1,15 @@ +require include/gles-control.inc +require core-image-renesas-mmp-base.inc + +# Gstreamer Packages +GSTREAMER_PKGS = "packagegroup-gstreamer1.0-plugins" + +# Install packages for Wayland Env +# default: Basic packages, Gstreamer packages +# optional: GFX packages +IMAGE_INSTALL_append = " \ + ${GSTREAMER_PKGS} \ + packagegroup-wayland-community \ + packagegroup-graphics-renesas-proprietary \ + packagegroup-graphics-renesas-wayland \ +" diff --git a/meta-rcar-gen3/recipes-graphics/mesa/mesa-dummy.inc b/meta-rcar-gen3/recipes-graphics/mesa/mesa-dummy.inc new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/mesa/mesa-dummy.inc diff --git a/meta-rcar-gen3/recipes-graphics/mesa/mesa-wayland.inc b/meta-rcar-gen3/recipes-graphics/mesa/mesa-wayland.inc new file mode 100644 index 0000000..55b8c15 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/mesa/mesa-wayland.inc @@ -0,0 +1,33 @@ +# FIXME: can not override PACKAGECONFIG. +PACKAGECONFIG[gles] = "--enable-gles1 --disable-gles2" +PACKAGECONFIG[egl] = "--enable-egl --with-egl-platforms=wayland" + +# Disable the gbm modules of mesa +PACKAGECONFIG_remove = "gbm" + +# Remove the gbm and egl packages. These are provided in other recipes. +PACKAGES_remove = " \ + libgbm-dev libgbm \ + libegl-mesa-dev libegl-mesa \ + libegl-dev libegl \ + libgles2-mesa libgles2-mesa-dev \ +" +INSTALLED_HEADER = "src/egl/wayland/wayland-egl/wayland-egl-priv.h" + +do_install_append() { + # Remove libegl-mesa modules and headers + rm -f ${D}/${libdir}/libEGL.la + rm -f ${D}/${libdir}/libEGL.so* + rm -f ${D}/${libdir}/pkgconfig/egl.pc + rm -rf ${D}/${includedir}/EGL + rm -rf ${D}/${includedir}/KHR + + # install required header for wayland + install -d ${D}/usr/include + install -m 644 ${S}/${INSTALLED_HEADER} ${D}/usr/include/ +} + +FILES_libwayland-egl-dev += " \ + /usr/include \ + /usr/include/*.h \ +" diff --git a/meta-rcar-gen3/recipes-graphics/mesa/mesa_%.bbappend b/meta-rcar-gen3/recipes-graphics/mesa/mesa_%.bbappend new file mode 100644 index 0000000..e1b7ad2 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/mesa/mesa_%.bbappend @@ -0,0 +1,10 @@ +require include/gles-control.inc + +def map_libs(d): + if base_conditional('USE_GLES_WAYLAND', "1", "1", "0", d) == "1": + return "wayland" + + return "dummy" + +MESATARGET := "${@map_libs(d)}" +include mesa-${MESATARGET}.inc diff --git a/meta-rcar-gen3/recipes-graphics/packagegroups/packagegroup-graphic-renesas.bb b/meta-rcar-gen3/recipes-graphics/packagegroups/packagegroup-graphic-renesas.bb new file mode 100644 index 0000000..f94d289 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/packagegroups/packagegroup-graphic-renesas.bb @@ -0,0 +1,36 @@ +SUMMARY = "Renesas package group for Weston" +LICENSE = "CLOSED & MIT" + +inherit packagegroup +require include/gles-control.inc + +PACKAGES = " \ + packagegroup-wayland-community \ + packagegroup-graphics-renesas-proprietary \ + packagegroup-graphics-renesas-wayland \ +" + +PR = "r0" + +RDEPENDS_packagegroup-wayland-community = " \ + wayland \ + weston \ + alsa-utils \ + alsa-tools \ + libdrm-tests \ + libdrm-kms \ +" + +RDEPENDS_packagegroup-graphics-renesas-proprietary = " \ + ${@bb.utils.contains('USE_GLES', '1', \ + 'kernel-module-gles gles-user-module' , \ + '', d)} \ +" + +DEPENDS_packagegroup-graphics-renesas-wayland = "libegl" + +RDEPENDS_packagegroup-graphics-renesas-wayland = " \ + ${@bb.utils.contains('USE_GLES_WAYLAND', '1', \ + 'libgbm libgbm-dev wayland-kms', \ + '', d)} \ +" diff --git a/meta-rcar-gen3/recipes-graphics/packagegroups/packagegroup-graphics-libegl.bb b/meta-rcar-gen3/recipes-graphics/packagegroups/packagegroup-graphics-libegl.bb new file mode 100644 index 0000000..35bfd37 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/packagegroups/packagegroup-graphics-libegl.bb @@ -0,0 +1,25 @@ +SUMMARY = "Graphics OpenGL ES user libraries and depenencies package group" +LICENSE = "CLOSED & MIT" + +DEPENDS = "gles-user-module \ + ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'libgbm wayland-kms', '', d)} \ +" + +PR = "r0" + +inherit packagegroup + +PACKAGES = " \ + packagegroup-graphics-libegl \ +" + +RDEPENDS_packagegroup-graphics-libegl = " \ + gles-user-module \ + ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'libgbm wayland-kms', '', d)} \ +" + +PROVIDES = "virtual/egl" +RPROVIDES_${PN} += " \ + libegl \ + libegl1 \ +" diff --git a/meta-rcar-gen3/recipes-graphics/wayland/libegl.bb b/meta-rcar-gen3/recipes-graphics/wayland/libegl.bb new file mode 100644 index 0000000..0bde4ae --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/libegl.bb @@ -0,0 +1,19 @@ +SUMMARY = "Recipe for libegl" +LICENSE = "CLOSED" + +DEPENDS = "gles-user-module \ + ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'libgbm wayland-kms', '', d)} \ +" + +PR = "r0" + +RDEPENDS_${PN} = " \ + gles-user-module \ + ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'libgbm wayland-kms', '', d)} \ +" + +PROVIDES = "virtual/egl" +RPROVIDES_${PN} += " \ + libegl \ + libegl1 \ +" diff --git a/meta-rcar-gen3/recipes-graphics/wayland/libgbm.bb b/meta-rcar-gen3/recipes-graphics/wayland/libgbm.bb new file mode 100644 index 0000000..d0d1499 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/libgbm.bb @@ -0,0 +1,35 @@ +SUMMARY = "gbm library" +LICENSE = "MIT" +SECTION = "libs" + +LIC_FILES_CHKSUM = " \ + file://gbm.c;beginline=4;endline=22;md5=5cdaac262c876e98e47771f11c7036b5" + +SRCREV = "a0c7d6c97fe1fffe45eee524060cbb12767c6461" +SRC_URI = "git://github.com/renesas-rcar/libgbm;branch=rcar-gen3" + +S = "${WORKDIR}/git" + +COMPATIBLE_MACHINE = "(r8a7795|r8a7796)" +DEPENDS = "wayland-kms" + +inherit autotools pkgconfig + +PACKAGES = " \ + ${PN} \ + ${PN}-dev \ + ${PN}-dbg \ + ${PN}-staticdev \ +" + +FILES_${PN} = " \ + ${libdir}/libgbm.so.* \ + ${libdir}/gbm/libgbm_kms.so.* \ + ${libdir}/gbm/*.so \ + ${libdir}/*.so \ +" +FILES_${PN}-dev += "${libdir}/gbm/*.la" +FILES_${PN}-dbg += "${libdir}/gbm/.debug/*" +FILES_${PN}-staticdev += "${libdir}/gbm/*.a" + +INSANE_SKIP_${PN} += "dev-so" diff --git a/meta-rcar-gen3/recipes-graphics/wayland/wayland-kms_1.6.0.bb b/meta-rcar-gen3/recipes-graphics/wayland/wayland-kms_1.6.0.bb new file mode 100644 index 0000000..e50cac0 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/wayland-kms_1.6.0.bb @@ -0,0 +1,25 @@ +SUMMARY = "KMS library for Wayland" +LICENSE = "MIT" + +LIC_FILES_CHKSUM = " \ + file://wayland-kms.c;beginline=6;endline=24;md5=5cdaac262c876e98e47771f11c7036b5" + +PV_append = "+git${SRCREV}" + +SRCREV = "15184e5bd3701938a6b30b8f03b471477fc742e8" +SRC_URI = "git://github.com/renesas-rcar/wayland-kms.git;branch=rcar-gen3" + +COMPATIBLE_MACHINE = "(r8a7795|r8a7796)" +S = "${WORKDIR}/git" +DEPENDS = "libdrm wayland gles-user-module wayland-native" + +inherit autotools pkgconfig + +FILES_${PN} = "${libdir}/libwayland-kms.so.*" +FILES_${PN}-dev = " \ + ${libdir}/libwayland-kms.la \ + ${libdir}/libwayland-kms.so \ + ${libdir}/pkgconfig/* \ + ${includedir}/* \ +" +FILES_${PN}-staticdev += "${libdir}/libwayland-kms.a" diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston-init.bbappend b/meta-rcar-gen3/recipes-graphics/wayland/weston-init.bbappend new file mode 100644 index 0000000..2886bae --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/weston-init.bbappend @@ -0,0 +1,16 @@ +require include/gles-control.inc + +FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:" + +SRC_URI += " \ + file://weston.service \ +" + +do_install_append() { + if [ "X${USE_GLES}" = "X1" ]; then + sed -e "/RequiresMountsFor=\/run/a Wants=rc.pvr.service" \ + -e "/RequiresMountsFor=\/run/a After=rc.pvr.service" \ + -e "s/\$OPTARGS/--idle-time=0 \$OPTARGS/" \ + -i ${D}/${systemd_system_unitdir}/weston.service + fi +} diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston-init/weston.service b/meta-rcar-gen3/recipes-graphics/wayland/weston-init/weston.service new file mode 100644 index 0000000..79afa67 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/weston-init/weston.service @@ -0,0 +1,12 @@ +[Unit] +Description=Weston Wayland Compositor +RequiresMountsFor=/run +After=dbus.service rc.pvr.service + +[Service] +User=root +EnvironmentFile=-/etc/default/weston +ExecStart=/usr/bin/weston-launch -u root -- $OPTARGS + +[Install] +WantedBy=multi-user.target diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston.inc b/meta-rcar-gen3/recipes-graphics/wayland/weston.inc new file mode 100644 index 0000000..e475aea --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/weston.inc @@ -0,0 +1,16 @@ +require include/gles-control.inc +require include/multimedia-control.inc + +PACKAGECONFIG_remove_virtclass-multilib-lib32 = "launch" +DEPENDS_append = " \ + ${@base_conditional('USE_GLES', '1', ' libgbm', '', d)}" + +RDEPENDS_${PN}_append = " \ + ${@base_conditional('USE_GLES', '1', ' libgbm', '', d)} \ +" +RDEPENDS_${PN}-examples_append = " \ + ${@base_conditional('USE_GLES', '1', ' libgbm', '', d)}" + +EXTRA_OECONF_append = " \ + ${@base_conditional('USE_GLES', '1', '', \ + ' WESTON_NATIVE_BACKEND="fbdev-backend.so"', d)}" diff --git a/meta-rcar-gen3/recipes-graphics/wayland/weston_2.%.bbappend b/meta-rcar-gen3/recipes-graphics/wayland/weston_2.%.bbappend new file mode 100644 index 0000000..34ea2c9 --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/wayland/weston_2.%.bbappend @@ -0,0 +1 @@ +require weston.inc diff --git a/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend b/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend new file mode 100644 index 0000000..918407d --- /dev/null +++ b/meta-rcar-gen3/recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend @@ -0,0 +1 @@ +PACKAGECONFIG_remove = "glamor" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-adsp/kernel-module-xtensa-hifi.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-adsp/kernel-module-xtensa-hifi.bb new file mode 100644 index 0000000..6d659ed --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-adsp/kernel-module-xtensa-hifi.bb @@ -0,0 +1,32 @@ +DESCRIPTION = "ADSP Driver for Linux" +LICENSE = "GPLv2 & MIT" + +LIC_FILES_CHKSUM = " \ + file://COPYING;md5=55979d94ccbb973fdea772250e0c54d6 \ + file://MIT-COPYING;md5=f932f6ad0feea4f97b6e8316e172070e \ +" + +require include/adsp-control.inc +inherit module + +FILESEXTRAPATHS_prepend := "${THISDIR}/xtensa-hifi:" + +SRC_URI = "${@base_conditional('USE_ADSP', '1', 'file://RCG3AHPDL4001ZDO.tar.gz', '', d)}" + +S = "${WORKDIR}/RCG3AHPDL4001ZDO" + +# Define the extra config for using module.bbclass to build ADSP driver +EXTRA_OEMAKE_append = " KDIR=${STAGING_KERNEL_DIR}" + +do_install_append(){ + # Create install directories + install -d ${D}/${includedir} + install -d ${D}/${includedir}/sys/xt-shmem + + # Install shared header files + install -m 644 ${S}/include/*.h ${D}/${includedir}/ + install -m 644 ${S}/include/sys/xt-shmem/*.h ${D}/${includedir}/sys/xt-shmem/ +} + +# The ADSP driver need adsp firmware for running +RDEPENDS_${PN}_append = " adsp-fw-module" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-mch.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-mch.bb new file mode 100644 index 0000000..fb0e4cd --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-mch.bb @@ -0,0 +1,36 @@ +DESCRIPTION = "AVB MCH Driver for Linux for the R-Car Gen3" + +require include/avb-control.inc +require include/rcar-gen3-modules-common.inc + +LICENSE = "GPLv2 & MIT" +LIC_FILES_CHKSUM = " \ + file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://MIT-COPYING;md5=96e553279b3fff0d6168dafe0b596197 \ +" + +inherit module distro_features_check + +DEPENDS = "linux-renesas" + +REQUIRED_DISTRO_FEATURES = "avb" + +SRC_URI = "git://github.com/renesas-rcar/avb-mch.git;branch=rcar-gen3" +SRCREV = "440092412e5e100700c4a9ec36655ed38174b5dd" + +S = "${WORKDIR}/git" + +includedir = "${RENESAS_DATADIR}/include" + +do_install_append() { + # Create destination directories + install -d ${KERNELSRC}/include + install -d ${D}/${includedir} + + # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR). + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/ravb_mch.h ${KERNELSRC}/include + + # Install shared header files to ${includedir} + install -m 644 ${S}/ravb_mch.h ${D}/${includedir} +} diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-mse.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-mse.bb new file mode 100644 index 0000000..a3054b2 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-mse.bb @@ -0,0 +1,38 @@ +DESCRIPTION = "AVB MSE Driver for Linux for the R-Car Gen3" + +require include/avb-control.inc +require include/rcar-gen3-modules-common.inc + +LICENSE = "GPLv2 & MIT" +LIC_FILES_CHKSUM = " \ + file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://MIT-COPYING;md5=98449101c5d5452a9429b88d6ead1ba4 \ +" + +inherit module distro_features_check + +DEPENDS = "linux-renesas kernel-module-avb-streaming kernel-module-avb-mch" + +REQUIRED_DISTRO_FEATURES = "avb" + +SRC_URI = "git://github.com/renesas-rcar/avb-mse.git;branch=rcar-gen3" +SRCREV = "283ef1ed8f17167be4ec6906c0a45b206caf9f7a" + +S = "${WORKDIR}/git" + +includedir = "${RENESAS_DATADIR}/include" + +do_install_append() { + # Create destination directories + install -d ${KERNELSRC}/include + install -d ${D}/${includedir} + + # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR). + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/ravb_mse.h ${KERNELSRC}/include + install -m 644 ${S}/ravb_mse_kernel.h ${KERNELSRC}/include + + # Install shared header files to ${includedir} + install -m 644 ${S}/ravb_mse.h ${D}/${includedir} + install -m 644 ${S}/ravb_mse_kernel.h ${D}/${includedir} +} diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-streaming.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-streaming.bb new file mode 100644 index 0000000..5f1f0df --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-avb/kernel-module-avb-streaming.bb @@ -0,0 +1,36 @@ +DESCRIPTION = "AVB Streaming Driver for Linux for the R-Car Gen3" + +require include/rcar-gen3-modules-common.inc +require include/avb-control.inc + +LICENSE = "GPLv2 & MIT" +LIC_FILES_CHKSUM = " \ + file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://MIT-COPYING;md5=704e38c3a28fde2e7fa153d3e0e787a4 \ +" + +inherit module distro_features_check + +DEPENDS = "linux-renesas" + +REQUIRED_DISTRO_FEATURES = "avb" + +SRC_URI = "git://github.com/renesas-rcar/avb-streaming.git;branch=rcar-gen3" +SRCREV = "a573d90f0467bfe1e2fc06fc0790fd71d4840488" + +S = "${WORKDIR}/git" + +includedir="${RENESAS_DATADIR}/include" + +do_install_append () { + # Create destination directories + install -d ${KERNELSRC}/include + install -d ${D}/${includedir} + + # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR). + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/ravb_eavb.h ${KERNELSRC}/include + + # Install shared header files to ${includedir} + install -m 644 ${S}/ravb_eavb.h ${D}/${includedir} +} diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-scu-src.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-scu-src.bb new file mode 100644 index 0000000..e96799f --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-scu-src.bb @@ -0,0 +1,55 @@ +DESCRIPTION = "DTV Driver part of scu_src for Linux for the R-Car Gen3" + +require include/rcar-gen3-modules-common.inc +require include/dtv-dvd-control.inc + +LICENSE = "GPLv2 & MIT" +LIC_FILES_CHKSUM = " \ + file://scu_src_drv/include/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://scu_src_drv/include/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \ +" + +inherit module distro_features_check + +DEPENDS = "linux-renesas" +PN = "kernel-module-scu-src" +PR = "r0" + +REQUIRED_DISTRO_FEATURES = "dtv" + +SRC_URI = "file://scu_src_drv.tar.gz" + +S = "${WORKDIR}" + +EXTRA_OEMAKE_r8a7795 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_H3" +EXTRA_OEMAKE_r8a7796 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_M3" + +do_compile() { + cd ${S}/scu_src_drv/drv + oe_runmake +} + +do_install () { + # Create destination directories + install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/ + install -d ${KERNELSRC}/include + + # Install kernel module + install -m 644 ${S}/scu_src_drv/drv/scu_src_drv.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/ + + # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR). + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/scu_src_drv/include/*.h ${KERNELSRC}/include + install -m 644 ${S}/scu_src_drv/drv/Module.symvers ${KERNELSRC}/include/scu-drv.symvers +} + +PACKAGES = "\ + ${PN} \ +" + +FILES_${PN} = " \ + /lib/modules/${KERNEL_VERSION}/extra/scu_src_drv.ko \ +" + +RPROVIDES_${PN} += "kernel-module-scu-src kernel-module-scu-src-drv" +INHIBIT_PACKAGE_DEBUG_SPLIT = "1" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-ssp.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-ssp.bb new file mode 100644 index 0000000..e51c3a0 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-ssp.bb @@ -0,0 +1,55 @@ +DESCRIPTION = "DTV Driver part of ssp for Linux for the R-Car Gen3" + +require include/rcar-gen3-modules-common.inc +require include/dtv-dvd-control.inc + +LICENSE = "GPLv2 & MIT" +LIC_FILES_CHKSUM = " \ + file://ssp_drv/include/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://ssp_drv/include/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \ +" + +inherit module distro_features_check + +DEPENDS = "linux-renesas" +PN = "kernel-module-ssp" +PR = "r0" + +REQUIRED_DISTRO_FEATURES = "dtv" + +SRC_URI = "file://ssp_drv.tar.gz" + +S = "${WORKDIR}" + +EXTRA_OEMAKE_r8a7795 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_H3" +EXTRA_OEMAKE_r8a7796 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_M3" + +do_compile() { + cd ${S}/ssp_drv/drv + oe_runmake +} + +do_install () { + # Create destination directories + install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/ + install -d ${KERNELSRC}/include + + # Install kernel module + install -m 644 ${S}/ssp_drv/drv/ssp_dev.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/ + + # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR). + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/ssp_drv/include/*.h ${KERNELSRC}/include + install -m 644 ${S}/ssp_drv/drv/Module.symvers ${KERNELSRC}/include/ssp_drv.symvers +} + +PACKAGES = "\ + ${PN} \ +" + +FILES_${PN} = " \ + /lib/modules/${KERNEL_VERSION}/extra/ssp_dev.ko \ +" + +RPROVIDES_${PN} += "kernel-module-ssp" +INHIBIT_PACKAGE_DEBUG_SPLIT = "1" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-tddmac.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-tddmac.bb new file mode 100644 index 0000000..b2533fb --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-tddmac.bb @@ -0,0 +1,55 @@ +DESCRIPTION = "DTV Driver part of tddmac for Linux for the R-Car Gen3" + +require include/rcar-gen3-modules-common.inc +require include/dtv-dvd-control.inc + +LICENSE = "GPLv2 & MIT" +LIC_FILES_CHKSUM = " \ + file://tddmac_drv/include/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://tddmac_drv/include/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \ +" + +inherit module distro_features_check + +DEPENDS = "linux-renesas" +PN = "kernel-module-tddmac" +PR = "r0" + +REQUIRED_DISTRO_FEATURES = "dtv" + +SRC_URI = "file://tddmac_drv.tar.gz" + +S = "${WORKDIR}" + +EXTRA_OEMAKE_r8a7795 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_H3" +EXTRA_OEMAKE_r8a7796 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_M3" + +do_compile() { + cd ${S}/tddmac_drv/drv + oe_runmake +} + +do_install () { + # Create destination directories + install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/ + install -d ${KERNELSRC}/include + + # Install kernel module + install -m 644 ${S}/tddmac_drv/drv/tddmac.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/ + + # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR). + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/tddmac_drv/include/*.h ${KERNELSRC}/include + install -m 644 ${S}/tddmac_drv/drv/Module.symvers ${KERNELSRC}/include/tddmac_drv.symvers +} + +PACKAGES = "\ + ${PN} \ +" + +FILES_${PN} = " \ + /lib/modules/${KERNEL_VERSION}/extra/tddmac.ko \ +" + +RPROVIDES_${PN} += "kernel-module-tddmac" +INHIBIT_PACKAGE_DEBUG_SPLIT = "1" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-tsif.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-tsif.bb new file mode 100644 index 0000000..c0b77f9 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-dtv/kernel-module-tsif.bb @@ -0,0 +1,54 @@ +DESCRIPTION = "DTV Driver part of tsif for Linux for the R-Car Gen3" + +require include/rcar-gen3-modules-common.inc +require include/dtv-dvd-control.inc + +LICENSE = "GPLv2 & MIT" +LIC_FILES_CHKSUM = " \ + file://tsif_drv/include/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://tsif_drv/include/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \ +" + +inherit module distro_features_check + +PN = "kernel-module-tsif" +PR = "r0" + +REQUIRED_DISTRO_FEATURES = "dtv" + +SRC_URI = "file://tsif_drv.tar.gz" + +S = "${WORKDIR}" + +EXTRA_OEMAKE_r8a7795 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_H3" +EXTRA_OEMAKE_r8a7796 += "DTV_MAKE_HW_SWITCH=HW_SUPPORT_M3" + +do_compile() { + cd ${S}/tsif_drv/drv + oe_runmake +} + +do_install () { + # Create destination directories + install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/ + install -d ${KERNELSRC}/include + + # Install kernel module + install -m 644 ${S}/tsif_drv/drv/tsif_drv.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/ + + # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR). + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/tsif_drv/include/*.h ${KERNELSRC}/include + install -m 644 ${S}/tsif_drv/drv/Module.symvers ${KERNELSRC}/include/tsif_drv.symvers +} + +PACKAGES = "\ + ${PN} \ +" + +FILES_${PN} = " \ + /lib/modules/${KERNEL_VERSION}/extra/tsif_drv.ko \ +" + +RPROVIDES_${PN} += "kernel-module-tsif kernel-module-tsif-drv" +INHIBIT_PACKAGE_DEBUG_SPLIT = "1" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-gles/kernel-module-gles.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-gles/kernel-module-gles.bb new file mode 100644 index 0000000..6e1ead9 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-gles/kernel-module-gles.bb @@ -0,0 +1,59 @@ +DESCRIPTION = "Kernel module of PowerVR GPU" +LICENSE = "GPLv2 & MIT" +LIC_FILES_CHKSUM = " \ + file://GPL-COPYING;md5=60422928ba677faaa13d6ab5f5baaa1e \ + file://MIT-COPYING;md5=8c2810fa6bfdc5ae5c15a0c1ade34054 \ +" +inherit module +PN = "kernel-module-gles" +PR = "r0" + +COMPATIBLE_MACHINE = "(r8a7795|r8a7796)" +PACKAGE_ARCH = "${MACHINE_ARCH}" + +SRC_URI_r8a7795 = 'file://GSX_KM_H3.tar.bz2' +SRC_URI_r8a7796 = 'file://GSX_KM_M3.tar.bz2' +S = "${WORKDIR}/rogue_km" + +KBUILD_DIR_r8a7795 = "${S}/build/linux/r8a7795_linux" +KBUILD_DIR_r8a7796 = "${S}/build/linux/r8a7796_linux" +KBUILD_OUTDIR_r8a7795 = "binary_r8a7795_linux_release/target_aarch64/kbuild/" +KBUILD_OUTDIR_r8a7796 = "binary_r8a7796_linux_release/target_aarch64/kbuild/" + +B = "${KBUILD_DIR}" + +EXTRA_OEMAKE = "KERNELDIR=${STAGING_KERNEL_BUILDDIR}" +EXTRA_OEMAKE += "CROSS_COMPILE=${CROSS_COMPILE}" + +module_do_compile() { + unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS + cd ${KBUILD_DIR} + oe_runmake +} + +module_do_install() { + unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS + install -d ${D}/lib/modules/${KERNEL_VERSION} + cd ${KBUILD_DIR} + oe_runmake DISCIMAGE="${D}" install +} + +# Ship the module symbol file to kerenel build dir +SYSROOT_PREPROCESS_FUNCS = "module_sysroot_symbol" + +module_sysroot_symbol() { + install -m 644 ${S}/${KBUILD_OUTDIR}/Module.symvers ${STAGING_KERNEL_BUILDDIR}/GLES.symvers +} + +# Clean up the module symbol file +CLEANFUNCS = "module_clean_symbol" + +module_clean_symbol() { + rm -f ${STAGING_KERNEL_BUILDDIR}/GLES.symvers +} + +RPROVIDES_${PN} += " \ + ${PN}-${KERNEL_VERSION} \ + kernel-module-pvrsrvkm \ + kernel-module-dc-linuxfb \ +" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-iccom/kernel-module-iccom-hwspinlock-sample.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-iccom/kernel-module-iccom-hwspinlock-sample.bb new file mode 100644 index 0000000..c088e0f --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-iccom/kernel-module-iccom-hwspinlock-sample.bb @@ -0,0 +1,32 @@ +DESCRIPTION = "Linux ICCOM hwspinlock Sample Driver for Renesas R-Car Gen3" + +require include/rcar-gen3-modules-common.inc +require include/iccom-control.inc + +LICENSE = "GPLv2" +LIC_FILES_CHKSUM = "file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263" + +inherit module distro_features_check + +DEPENDS = "linux-renesas" +PN = "kernel-module-iccom-hwspinlock-sample" +PR = "r0" + +REQUIRED_DISTRO_FEATURES = "iccom" + +SRC_URI = "file://iccom-hwspinlock-sample.tar.bz2" + +S = "${WORKDIR}/iccom-hwspinlock-sample" +B = "${S}/iccom-hwspinlock-sample" + +do_install () { + # Create destination directory + install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/ + + # Install kernel module + install -m 644 ${B}/iccom_hwspinlock_sample.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/ +} + +FILES_${PN} = " \ + /lib/modules/${KERNEL_VERSION}/extra/iccom_hwspinlock_sample.ko \ +" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-iccom/kernel-module-iccom-mfis.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-iccom/kernel-module-iccom-mfis.bb new file mode 100644 index 0000000..b2132ad --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-iccom/kernel-module-iccom-mfis.bb @@ -0,0 +1,35 @@ +DESCRIPTION = "Linux ICCOM MFIS Driver for Renesas R-Car Gen3" + +require include/rcar-gen3-modules-common.inc +require include/iccom-control.inc + +LICENSE = "GPLv2" +LIC_FILES_CHKSUM = "file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263" + +inherit module distro_features_check + +DEPENDS = "linux-renesas" +PN = "kernel-module-iccom-mfis" +PR = "r0" + +REQUIRED_DISTRO_FEATURES = "iccom" + +SRC_URI = "file://iccom-mfis.tar.bz2" + +S = "${WORKDIR}/iccom-mfis" +B = "${S}/iccom-mfis/drv" + +do_install () { + # Create destination directory + install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/ + + # Install kernel module + install -m 644 ${B}/iccom_mfis.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/ +} + +FILES_${PN} = " \ + /lib/modules/${KERNEL_VERSION}/extra/iccom_mfis.ko \ +" + +# Autoload ICCOM MFIS Driver +KERNEL_MODULE_AUTOLOAD = "iccom_mfis" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/kernel-module-mmngr.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/kernel-module-mmngr.bb new file mode 100644 index 0000000..d12f6f2 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/kernel-module-mmngr.bb @@ -0,0 +1,73 @@ +DESCRIPTION = "Memory Manager Kernel module for Renesas R-Car Gen3" + +require mmngr_drv.inc +require include/dtv-dvd-control.inc + +DEPENDS = "linux-renesas" +PN = "kernel-module-mmngr" +PR = "r0" + +S = "${WORKDIR}/git" +MMNGR_DRV_DIR = "mmngr_drv/mmngr/mmngr-module/files/mmngr" + +MMNGR_CFG_salvator-x = "MMNGR_SALVATORX" +MMNGR_CFG_h3ulcb = "MMNGR_SALVATORX" +MMNGR_CFG_m3ulcb = "MMNGR_SALVATORX" + +includedir="${RENESAS_DATADIR}/include" +SSTATE_DUPWHITELIST += "${STAGING_INCDIR}" + +do_compile() { + export MMNGR_CONFIG=${MMNGR_CFG} + + if [ "X${USE_DTV}" = "X1" ]; then + export MMNGR_SSP_CONFIG="MMNGR_SSP_ENABLE" + else + export MMNGR_SSP_CONFIG="MMNGR_SSP_DISABLE" + fi + + export MMNGR_IPMMU_MMU_CONFIG="IPMMU_MMU_DISABLE" + + cd ${S}/${MMNGR_DRV_DIR}/drv + install -d ${INCSHARED} + make all +} + +do_install () { + # Create destination directories + install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/ + install -d ${KERNELSRC}/include + install -d ${D}/${includedir} + + # Install shared library to KERNELSRC(STAGING_KERNEL_DIR) for reference from other modules + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/${MMNGR_DRV_DIR}/drv/Module.symvers ${KERNELSRC}/include/mmngr.symvers + + # Install kernel module + install -m 644 ${S}/${MMNGR_DRV_DIR}/drv/mmngr.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/ + + # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR) + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/${MMNGR_DRV_DIR}/include/mmngr_public.h ${KERNELSRC}/include/ + install -m 644 ${S}/${MMNGR_DRV_DIR}/include/mmngr_private.h ${KERNELSRC}/include/ + install -m 644 ${S}/${MMNGR_DRV_DIR}/include/mmngr_public_cmn.h ${KERNELSRC}/include/ + install -m 644 ${S}/${MMNGR_DRV_DIR}/include/mmngr_private_cmn.h ${KERNELSRC}/include/ + + # Install shared header file to ${includedir} + install -m 644 ${S}/${MMNGR_DRV_DIR}/include/mmngr_public_cmn.h ${D}/${includedir}/ + install -m 644 ${S}/${MMNGR_DRV_DIR}/include/mmngr_private_cmn.h ${D}/${includedir}/ +} + +PACKAGES = "\ + ${PN} \ + ${PN}-dev \ +" + +FILES_${PN} = " \ + /lib/modules/${KERNEL_VERSION}/extra/mmngr.ko \ +" + +RPROVIDES_${PN} += " \ + kernel-module-mmngr \ + ${PN}-${KERNEL_VERSION} \ +" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/kernel-module-mmngrbuf.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/kernel-module-mmngrbuf.bb new file mode 100644 index 0000000..bdbf768 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/kernel-module-mmngrbuf.bb @@ -0,0 +1,55 @@ +DESCRIPTION = "Memory Manager Buffer Kernel module for Renesas R-Car Gen3" + +require mmngr_drv.inc + +DEPENDS = "linux-renesas" +PN = "kernel-module-mmngrbuf" +PR = "r0" + +S = "${WORKDIR}/git" +MMNGRBUF_DRV_DIR = "mmngr_drv/mmngrbuf/mmngrbuf-module/files/mmngrbuf" + +includedir="${RENESAS_DATADIR}/include" +SSTATE_DUPWHITELIST += "${STAGING_INCDIR}" + +do_compile() { + cd ${S}/${MMNGRBUF_DRV_DIR}/drv + install -d ${INCSHARED} + make all +} + +do_install () { + # Create destination directories + install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/ + install -d ${KERNELSRC}/include + install -d ${D}/${includedir} + + # Install shared library to KERNELSRC(STAGING_KERNEL_DIR) for reference from other modules + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/${MMNGRBUF_DRV_DIR}/drv/Module.symvers ${KERNELSRC}/include/mmngrbuf.symvers + + # Install kernel module + install -m 644 ${S}/${MMNGRBUF_DRV_DIR}/drv/mmngrbuf.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/ + + # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR) + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/${MMNGRBUF_DRV_DIR}/include/mmngr_buf_private.h ${KERNELSRC}/include/ + install -m 644 ${S}/${MMNGRBUF_DRV_DIR}/include/mmngr_buf_private_cmn.h ${KERNELSRC}/include/ + + # Install shared header files to ${includedir} + install -m 644 ${S}/${MMNGRBUF_DRV_DIR}/include/mmngr_buf_private_cmn.h ${D}/${includedir}/ +} + +PACKAGES = "\ + ${PN} \ + ${PN}-dev \ +" + +FILES_${PN} = " \ + /lib/modules/${KERNEL_VERSION}/extra/mmngrbuf.ko \ +" + +RPROVIDES_${PN} += " \ + kernel-module-mmngrbuf \ + kernel-module-mmngrbuf-${KERNEL_VERSION} \ +" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/mmngr_drv.inc b/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/mmngr_drv.inc new file mode 100644 index 0000000..cb16d28 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-mmngr/mmngr_drv.inc @@ -0,0 +1,13 @@ +LICENSE = "GPLv2 & MIT" +LIC_FILES_CHKSUM = " \ + file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://MIT-COPYING;md5=192063521ce782a445a3c9f99a8ad560 \ +" + +require include/rcar-gen3-modules-common.inc +inherit module + +MMNGR_DRV_URI = "git://github.com/renesas-rcar/mmngr_drv.git" + +SRC_URI = "${MMNGR_DRV_URI};branch=rcar_gen3" +SRCREV = "f313b1716a6eb276adc5ec7b3db90ec191b65160" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-qos/kernel-module-qos.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-qos/kernel-module-qos.bb new file mode 100644 index 0000000..2c9a973 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-qos/kernel-module-qos.bb @@ -0,0 +1,61 @@ +DESCRIPTION = "QoS driver for the R-Car Gen3" + +require include/rcar-gen3-modules-common.inc + +LICENSE = "GPLv2 & MIT" +LIC_FILES_CHKSUM = " \ + file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://MIT-COPYING;md5=192063521ce782a445a3c9f99a8ad560 \ +" + +inherit module + +DEPENDS = "linux-renesas" +PN = "kernel-module-qos" +PR = "r0" + +QOS_DRV_URL = "git://github.com/renesas-rcar/qos_drv.git" +BRANCH = "rcar-gen3" +SRCREV = "720258efc7e36f5652011d9052b2fd89fe725e5f" + +SRC_URI = "${QOS_DRV_URL};branch=${BRANCH}" + +S = "${WORKDIR}/git" +QOS_DRV_DIR = "qos-module/files/qos/drv" + +includedir = "${RENESAS_DATADIR}/include" + +do_compile() { + cd ${S}/${QOS_DRV_DIR}/ + oe_runmake +} + +do_install () { + # Create destination directries + install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/ + install -d ${D}/${includedir} + + # Install shared library to KERNELSRC(STAGING_KERNEL_DIR) for reference from other modules + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/${QOS_DRV_DIR}/Module.symvers ${KERNELSRC}/include/qos.symvers + + # Install kernel module + install -m 644 ${S}/${QOS_DRV_DIR}/qos.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/ + + # Install shared header files + install -m 644 ${S}/${QOS_DRV_DIR}/qos.h ${KERNELSRC}/include/ + install -m 644 ${S}/${QOS_DRV_DIR}/qos_public_common.h ${KERNELSRC}/include/ + install -m 644 ${S}/${QOS_DRV_DIR}/qos_public_common.h ${D}/${includedir}/ +} + +PACKAGES = " \ + ${PN} \ + ${PN}-dev \ + ${PN}-dbg \ +" + +FILES_${PN} = " \ + /lib/modules/${KERNEL_VERSION}/extra/qos.ko \ +" + +RPROVIDES_${PN} += "${PN}-${KERNEL_VERSION}" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-uvcs/kernel-module-uvcs-drv.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-uvcs/kernel-module-uvcs-drv.bb new file mode 100644 index 0000000..b12c1de --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-uvcs/kernel-module-uvcs-drv.bb @@ -0,0 +1,65 @@ +DESCRIPTION = "Kernel module of UVCS" +LICENSE = "GPLv2 & MIT" +LIC_FILES_CHKSUM = " \ + file://include/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://src/lkm/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://src/core/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://src/cmn/GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://include/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \ + file://src/lkm/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \ + file://src/core/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \ + file://src/cmn/MIT-COPYING;md5=fea016ce2bdf2ec10080f69e9381d378 \ +" +require include/omx-control.inc +require include/rcar-gen3-path-common.inc + +inherit module +PR = "r0" + +UVCS_SRC = "${@base_conditional('USE_VIDEO_OMX', '1', 'file://RCG3VUDRL4001ZDO.tar.bz2', '', d)}" +SRC_URI = "${UVCS_SRC}" +S = "${WORKDIR}/RCG3VUDRL4001ZDO" + +EXTRA_OEMAKE = "KERNELDIR=${STAGING_KERNEL_BUILDDIR}" +EXTRA_OEMAKE += "CROSS_COMPILE=${CROSS_COMPILE}" + +B="${S}/src/makefile" + +includedir = "${RENESAS_DATADIR}/include" + +do_compile_prepend() { + export UVCS_SRC="${S}/src" + export UVCS_INC="${S}" + export VCP4_SRC="${S}/src" +} + +do_install() { + # Create destination directory + install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/ + install -d ${D}/${includedir}/ + + # Install kernel module + install -m 644 ${B}/uvcs_drv.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/ + + # Install module symbol file + install -m 644 ${B}/Module.symvers ${STAGING_KERNEL_BUILDDIR}/UVCS.symvers + + # Install shared header file + install -m 644 ${S}/include/uvcs_ioctl.h ${D}/${includedir}/ +} + +# Clean up the module symbol file +CLEANFUNCS = "module_clean_symbol" + +module_clean_symbol() { + rm -f ${STAGING_KERNEL_BUILDDIR}/UVCS.symvers +} + +PACKAGES = " \ + ${PN} \ + ${PN}-sstate \ +" + +FILES_${PN}-sstate = " \ + ${includedir}/uvcs_ioctl.h \ +" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-vsp2driver/kernel-module-vsp2driver.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-vsp2driver/kernel-module-vsp2driver.bb new file mode 100644 index 0000000..7e3a18d --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-vsp2driver/kernel-module-vsp2driver.bb @@ -0,0 +1,59 @@ +DESCRIPTION = "VSP2Driver for the R-Car Gen3" + +LICENSE = "GPLv2 & MIT" +LIC_FILES_CHKSUM = " \ + file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://MIT-COPYING;md5=192063521ce782a445a3c9f99a8ad560 \ +" + +require include/rcar-gen3-modules-common.inc + +inherit module + +DEPENDS = "linux-renesas kernel-module-vspm" +PN = "kernel-module-vsp2driver" +PR = "r0" + +VSP2DRIVER_URL = " \ + git://github.com/renesas-rcar/vsp2driver.git" +BRANCH = "rcar-gen3" +SRCREV = "f088f6d323c81f9c8002026f95495b941f6bedc1" + +SRC_URI = "${VSP2DRIVER_URL};branch=${BRANCH}" + +S = "${WORKDIR}/git" + +do_compile() { + cd ${S}/vsp2driver + make all +} + +do_install () { + # Create destination directories + install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/ + install -d ${KERNELSRC}/include + + # Install shared library to KERNELSRC(STAGING_KERNEL_DIR) for reference from other modules + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/vsp2driver/Module.symvers ${KERNELSRC}/include/vsp2.symvers + + # Copy kernel module + install -m 644 ${S}/vsp2driver/vsp2.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/ + + # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR) + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/vsp2driver/linux/vsp2.h ${KERNELSRC}/include/ +} + +PACKAGES = "\ + ${PN} \ +" + +FILES_${PN} = " \ + /lib/modules/${KERNEL_VERSION}/extra/vsp2.ko \ +" + +RPROVIDES_${PN} += "kernel-module-vsp2driver kernel-module-vsp2" + +# Autoload VSP2Driver +KERNEL_MODULE_AUTOLOAD = "vsp2" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-vspm/kernel-module-vspm.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-vspm/kernel-module-vspm.bb new file mode 100644 index 0000000..1b31cfc --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-vspm/kernel-module-vspm.bb @@ -0,0 +1,86 @@ +DESCRIPTION = "VSP Manager for the R-Car Gen3" + +require include/rcar-gen3-modules-common.inc + +LICENSE = "GPLv2 & MIT" +LIC_FILES_CHKSUM = " \ + file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://MIT-COPYING;md5=0ebf15a927e436cec699371cd890775c \ +" + +inherit module + +DEPENDS = "linux-renesas" +PN = "kernel-module-vspm" +PR = "r0" + +VSPM_DRV_URL = "git://github.com/renesas-rcar/vspm_drv.git" +BRANCH = "rcar_gen3" +SRCREV = "2bdd8fa3b21a44f0677657d2bf0d7c7f3656abad" + +SRC_URI = "${VSPM_DRV_URL};branch=${BRANCH}" + +S = "${WORKDIR}/git" +VSPM_DRV_DIR = "vspm-module/files/vspm" +includedir = "${RENESAS_DATADIR}/include" + +do_compile() { + cd ${S}/${VSPM_DRV_DIR}/drv + make all +} + +do_install () { + # Create destination directories + install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/ + install -d ${KERNELSRC}/include + install -d ${D}/${includedir} + + # Install shared library to KERNELSRC(STAGING_KERNEL_DIR) for reference from other modules + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/${VSPM_DRV_DIR}/drv/Module.symvers ${KERNELSRC}/include/vspm.symvers + + # Install kernel module + install -m 644 ${S}/${VSPM_DRV_DIR}/drv/vspm.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/ + + # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR) + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/${VSPM_DRV_DIR}/include/vspm_public.h ${KERNELSRC}/include/ + install -m 644 ${S}/${VSPM_DRV_DIR}/include/vspm_cmn.h ${KERNELSRC}/include/ + install -m 644 ${S}/${VSPM_DRV_DIR}/include/vsp_drv.h ${KERNELSRC}/include/ + install -m 644 ${S}/${VSPM_DRV_DIR}/include/fdp_drv.h ${KERNELSRC}/include/ + + # Install shared header files + install -m 644 ${S}/${VSPM_DRV_DIR}/include/vspm_cmn.h ${D}/${includedir}/ + install -m 644 ${S}/${VSPM_DRV_DIR}/include/vsp_drv.h ${D}/${includedir}/ + install -m 644 ${S}/${VSPM_DRV_DIR}/include/fdp_drv.h ${D}/${includedir}/ +} + +do_populate_sysroot[sstate-inputdirs] += "${S}/${VSPM_DRV_DIR}/include/" +do_populate_sysroot[sstate-outputdirs] += "${KERNELSRC}/include/" +do_populate_sysroot_setscene[prefuncs] = "vspm_sstate_check_func" +SSTATE_DUPWHITELIST = "${KERNELSRC}/include" + +vspm_sstate_check_func() { + # An error is returned when unpack of kernel source has not been completed yet. + # By returning error, rebuild task runs by force (Invalidating sstate). + # This module installs shared header files in ${KERNELSRC}/include by + # sstate cache. + # Those files will be deleted by unpack task of kernel. + if [ ! -d "${KERNELSRC}/include" ]; then + exit 1 + fi +} + +PACKAGES = " \ + ${PN} \ + ${PN}-dev \ +" + +FILES_${PN} = " \ + /lib/modules/${KERNEL_VERSION}/extra/vspm.ko \ +" + +RPROVIDES_${PN} += "kernel-module-vspm" + +# Autoload VSPM +KERNEL_MODULE_AUTOLOAD = "vspm" diff --git a/meta-rcar-gen3/recipes-kernel/kernel-module-vspmif/kernel-module-vspmif.bb b/meta-rcar-gen3/recipes-kernel/kernel-module-vspmif/kernel-module-vspmif.bb new file mode 100644 index 0000000..b3fe755 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/kernel-module-vspmif/kernel-module-vspmif.bb @@ -0,0 +1,68 @@ +DESCRIPTION = "VSP Manager Interface driver for the R-Car Gen3" + +require include/rcar-gen3-modules-common.inc + +LICENSE = "GPLv2 & MIT" +LIC_FILES_CHKSUM = " \ + file://GPL-COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://MIT-COPYING;md5=0ebf15a927e436cec699371cd890775c \ +" + +inherit module + +DEPENDS = "linux-renesas kernel-module-vspm" +PN = "kernel-module-vspmif" +PR = "r0" + +VSPMIF_DRV_URL = " \ + git://github.com/renesas-rcar/vspmif_drv.git" +BRANCH = "rcar_gen3" +SRCREV = "aed6adc8eb1661c9ff573b8c90e180a413c643ea" + +SRC_URI = "${VSPMIF_DRV_URL};branch=${BRANCH}" + +S = "${WORKDIR}/git" +VSPMIF_DRV_DIR = "vspm_if-module/files/vspm_if" + +includedir = "${RENESAS_DATADIR}/include" + +do_compile() { + cd ${S}/${VSPMIF_DRV_DIR}/drv + make all +} + +do_install () { + # Create destination directories + install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/ + install -d ${D}/${includedir} + install -d ${KERNELSRC}/include + + # Install shared library to KERNELSRC(STAGING_KERNEL_DIR) for reference from other modules + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/${VSPMIF_DRV_DIR}/drv/Module.symvers ${KERNELSRC}/include/vspm_if.symvers + + # Install kernel module + install -m 644 ${S}/${VSPMIF_DRV_DIR}/drv/vspm_if.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/ + + # Install shared header files to KERNELSRC(STAGING_KERNEL_DIR) + # This file installed in SDK by kernel-devsrc pkg. + install -m 644 ${S}/${VSPMIF_DRV_DIR}/include/vspm_if.h ${KERNELSRC}/include/ + + # Install shared header file + install -m 644 ${S}/${VSPMIF_DRV_DIR}/include/vspm_if.h ${D}/${includedir}/ +} + +PACKAGES = "\ + ${PN} \ + ${PN}-dev \ +" + +FILES_${PN} = " \ + /lib/modules/${KERNEL_VERSION}/extra/vspm_if.ko \ +" + +RPROVIDES_${PN} += " \ + kernel-module-vspm-if-${KERNEL_VERSION} \ + kernel-module-vspmif \ + kernel-module-vspm-if \ +" diff --git a/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers_4.9.bb b/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers_4.9.bb new file mode 100644 index 0000000..421e8ed --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/linux-libc-headers/linux-libc-headers_4.9.bb @@ -0,0 +1,10 @@ +require recipes-kernel/linux-libc-headers/linux-libc-headers.inc + +RENESAS_BSP_URL = " \ + git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas-bsp.git" +BRANCH = "v4.9/rcar-3.5.8" +SRCREV = "bef6058b0ba00238b19e7518ba76536218ef97f1" + +SRC_URI = "${RENESAS_BSP_URL};branch=${BRANCH}" + +S = "${WORKDIR}/git" diff --git a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0001-dmaengine-rcar-dmac-ensure-CHCR-DE-bit-is-actually-0.patch b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0001-dmaengine-rcar-dmac-ensure-CHCR-DE-bit-is-actually-0.patch new file mode 100644 index 0000000..64782f7 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0001-dmaengine-rcar-dmac-ensure-CHCR-DE-bit-is-actually-0.patch @@ -0,0 +1,83 @@ +From 1066e8ae45193732f235df740ac31f3e60fc1fe6 Mon Sep 17 00:00:00 2001 +From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> +Date: Fri, 10 Nov 2017 13:07:55 +0900 +Subject: [PATCH 1/3] dmaengine: rcar-dmac: ensure CHCR DE bit is actually 0 + after clear + +DMAC reads data from source device, and buffered it until transferable +size for shink deivce. Because of this behavoir, DMAC is including +buffered data . + +Now, CHCR DE bit is controlling DMA transfer enable/disable. + +If DE bit was cleared during data transfering, or during buffering, +it will flush buffered data if source device was peripheral device +(The buffered data will be removed if source device was memory). +Because of this behavior, driver should ensure that DE bit is actually +0 after cleared. + +This patch adds new rcar_dmac_chcr_de_barrier() and call it after CHCR +register access. + +Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> +--- + drivers/dma/sh/rcar-dmac.c | 22 ++++++++++++++++++++++ + 1 file changed, 22 insertions(+) + +diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar-dmac.c +index 2b2c7db..16ebd5d 100644 +--- a/drivers/dma/sh/rcar-dmac.c ++++ b/drivers/dma/sh/rcar-dmac.c +@@ -10,6 +10,7 @@ + * published by the Free Software Foundation. + */ + ++#include <linux/delay.h> + #include <linux/dma-mapping.h> + #include <linux/dmaengine.h> + #include <linux/interrupt.h> +@@ -741,6 +742,24 @@ static int rcar_dmac_fill_hwdesc(struct rcar_dmac_chan *chan, + /* ----------------------------------------------------------------------------- + * Stop and reset + */ ++static void rcar_dmac_chcr_de_barrier(struct rcar_dmac_chan *chan) ++{ ++ u32 chcr; ++ int i; ++ ++ /* ++ * Ensure that the setting of the DE bit is actually 0 after ++ * clearing it. ++ */ ++ for (i = 0; i < 1024; i++) { ++ chcr = rcar_dmac_chan_read(chan, RCAR_DMACHCR); ++ if (!(chcr & RCAR_DMACHCR_DE)) ++ return; ++ udelay(1); ++ } ++ ++ dev_err(chan->chan.device->dev, "CHCR DE check error\n"); ++} + + static void rcar_dmac_chan_halt(struct rcar_dmac_chan *chan) + { +@@ -749,6 +768,7 @@ static void rcar_dmac_chan_halt(struct rcar_dmac_chan *chan) + chcr &= ~(RCAR_DMACHCR_DSE | RCAR_DMACHCR_DSIE | RCAR_DMACHCR_IE | + RCAR_DMACHCR_TE | RCAR_DMACHCR_DE); + rcar_dmac_chan_write(chan, RCAR_DMACHCR, chcr); ++ rcar_dmac_chcr_de_barrier(chan); + } + + static void rcar_dmac_chan_reinit(struct rcar_dmac_chan *chan) +@@ -1481,6 +1501,8 @@ static irqreturn_t rcar_dmac_isr_channel(int irq, void *dev) + if (chcr & RCAR_DMACHCR_TE) + mask |= RCAR_DMACHCR_DE; + rcar_dmac_chan_write(chan, RCAR_DMACHCR, chcr & ~mask); ++ if (mask & RCAR_DMACHCR_DE) ++ rcar_dmac_chcr_de_barrier(chan); + + if (chcr & RCAR_DMACHCR_DSE) + ret |= rcar_dmac_isr_desc_stage_end(chan); +-- +1.9.1 + diff --git a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0002-dmaengine-rcar-dmac-use-TCRB-instead-of-TCR-for-resi.patch b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0002-dmaengine-rcar-dmac-use-TCRB-instead-of-TCR-for-resi.patch new file mode 100644 index 0000000..3454dff --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0002-dmaengine-rcar-dmac-use-TCRB-instead-of-TCR-for-resi.patch @@ -0,0 +1,104 @@ +From f5c857fb5913dcb4eea2e213ee69790b6dc127dd Mon Sep 17 00:00:00 2001 +From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> +Date: Mon, 13 Nov 2017 13:34:04 +0900 +Subject: [PATCH 2/3] dmaengine: rcar-dmac: use TCRB instead of TCR for residue + +SYS/RT/Audio DMAC includes independent data buffers for reading +and writing. Therefore, the read transfer counter and write transfer +counter have different values. +TCR indicates read counter, and TCRB indicates write counter. +The relationship is like below. + + TCR TCRB + [SOURCE] -> [DMAC] -> [SINK] + +In the MEM_TO_DEV direction, what really matters is how much data has +been written to the device. If the DMA is interrupted between read and +write, then, the data doesn't end up in the destination, so shouldn't +be counted. TCRB is thus the register we should use in this cases. + +In the DEV_TO_MEM direction, the situation is more complex. Both the +read and write side are important. What matters from a data consumer +point of view is how much data has been written to memory. +On the other hand, if the transfer is interrupted between read and +write, we'll end up losing data. It can also be important to report. + +In the MEM_TO_MEM direction, what matters is of course how much data +has been written to memory from data consumer point of view. +Here, because read and write have independent data buffers, it will +take a while for TCR and TCRB to become equal. Thus we should check +TCRB in this case, too. + +Thus, all cases we should check TCRB instead of TCR. + +Without this patch, Sound Capture has noise after PluseAudio support +(= 07b7acb51d2 ("ASoC: rsnd: update pointer more accurate")), because +the recorder will use wrong residue counter which indicates transferred +from sound device, but in reality the data was not yet put to memory +and recorder will record it. + +However, because DMAC is buffering data until it can be transferable +size, TCRB might not be updated. +For example, if consumer doesn't know how much data can be receaved, +it requests enough size to DMAC. But in reality, it might receave very +few data. In such case, DMAC just buffered it untile transferable size, +and no TCRB updated. + +In such case, this buffered data will be transfered if CHCR::DE bit was +cleared, and this is happen if rcar_dmac_chan_halt(). In other word, it +happen when consumer called dmaengine_terminate_all(). + +Because of this behavior, it need to flush buffered data when it returns +"residue" (= dmaengine_tx_status()). +Otherwise, consumer might calculate wrong things if it called +dmaengine_tx_status() and dmaengine_terminate_all() consecutively. + +Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> +--- + drivers/dma/sh/rcar-dmac.c | 22 +++++++++++++++++++++- + 1 file changed, 21 insertions(+), 1 deletion(-) + +diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar-dmac.c +index 16ebd5d..9cb85b2 100644 +--- a/drivers/dma/sh/rcar-dmac.c ++++ b/drivers/dma/sh/rcar-dmac.c +@@ -761,6 +761,23 @@ static void rcar_dmac_chcr_de_barrier(struct rcar_dmac_chan *chan) + dev_err(chan->chan.device->dev, "CHCR DE check error\n"); + } + ++static void rcar_dmac_sync_tcr(struct rcar_dmac_chan *chan) ++{ ++ u32 chcr = rcar_dmac_chan_read(chan, RCAR_DMACHCR); ++ ++ if (!(chcr & RCAR_DMACHCR_DE)) ++ return; ++ ++ /* set DE=0 and flush remaining data */ ++ rcar_dmac_chan_write(chan, RCAR_DMACHCR, (chcr & ~RCAR_DMACHCR_DE)); ++ ++ /* make sure all remaining data was fulshed */ ++ rcar_dmac_chcr_de_barrier(chan); ++ ++ /* back DE */ ++ rcar_dmac_chan_write(chan, RCAR_DMACHCR, chcr); ++} ++ + static void rcar_dmac_chan_halt(struct rcar_dmac_chan *chan) + { + u32 chcr = rcar_dmac_chan_read(chan, RCAR_DMACHCR); +@@ -1329,8 +1346,11 @@ static unsigned int rcar_dmac_chan_get_residue(struct rcar_dmac_chan *chan, + residue += chunk->size; + } + ++ if (desc->direction == DMA_DEV_TO_MEM) ++ rcar_dmac_sync_tcr(chan); ++ + /* Add the residue for the current chunk. */ +- residue += rcar_dmac_chan_read(chan, RCAR_DMATCR) << desc->xfer_shift; ++ residue += rcar_dmac_chan_read(chan, RCAR_DMATCRB) << desc->xfer_shift; + + return residue; + } +-- +1.9.1 + diff --git a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0003-ASoC-rcar-revert-IOMMU-support-so-far.patch b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0003-ASoC-rcar-revert-IOMMU-support-so-far.patch new file mode 100644 index 0000000..f5456e7 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0003-ASoC-rcar-revert-IOMMU-support-so-far.patch @@ -0,0 +1,191 @@ +From 1ad1207acf10070c94e1e3be598d9f5a2e9dd43e Mon Sep 17 00:00:00 2001 +From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> +Date: Mon, 13 Nov 2017 13:57:56 +0900 +Subject: [PATCH 3/3] ASoC: rcar: revert IOMMU support so far + +commit 4821d914fe7 ("ASoC: rsnd: use dma_sync_single_for_xxx() for +IOMMU") had supported IOMMU, but it breaks normal sound "recorde" +and both PulseAudio's "playback/recorde". The sound will be noisy. + +This commit is using dma_sync_single_for_xxx(), and driver should +make sure memory is protected during CPU or Device are using it. +But if driver returns current "residue" data size correctly on pointer +function, player/recorder will access to protected memory. + +This feature should be supported, but I don't know how to handle it +without problem at this point. Thus, this patch simply revert it to +avoid noisy sound. + +Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> +--- + sound/soc/sh/rcar/core.c | 4 +-- + sound/soc/sh/rcar/dma.c | 86 ++++-------------------------------------------- + 2 files changed, 8 insertions(+), 82 deletions(-) + +diff --git a/sound/soc/sh/rcar/core.c b/sound/soc/sh/rcar/core.c +index 21335d7..d22fd6d 100644 +--- a/sound/soc/sh/rcar/core.c ++++ b/sound/soc/sh/rcar/core.c +@@ -1394,8 +1394,8 @@ static int rsnd_pcm_new(struct snd_soc_pcm_runtime *rtd) + + return snd_pcm_lib_preallocate_pages_for_all( + rtd->pcm, +- SNDRV_DMA_TYPE_CONTINUOUS, +- snd_dma_continuous_data(GFP_KERNEL), ++ SNDRV_DMA_TYPE_DEV, ++ rtd->card->snd_card->dev, + PREALLOC_BUFFER, PREALLOC_BUFFER_MAX); + } + +diff --git a/sound/soc/sh/rcar/dma.c b/sound/soc/sh/rcar/dma.c +index fd557ab..4d750bdf 100644 +--- a/sound/soc/sh/rcar/dma.c ++++ b/sound/soc/sh/rcar/dma.c +@@ -26,10 +26,7 @@ + struct rsnd_dmaen { + struct dma_chan *chan; + dma_cookie_t cookie; +- dma_addr_t dma_buf; + unsigned int dma_len; +- unsigned int dma_period; +- unsigned int dma_cnt; + }; + + struct rsnd_dmapp { +@@ -71,38 +68,10 @@ struct rsnd_dma_ctrl { + /* + * Audio DMAC + */ +-#define rsnd_dmaen_sync(dmaen, io, i) __rsnd_dmaen_sync(dmaen, io, i, 1) +-#define rsnd_dmaen_unsync(dmaen, io, i) __rsnd_dmaen_sync(dmaen, io, i, 0) +-static void __rsnd_dmaen_sync(struct rsnd_dmaen *dmaen, struct rsnd_dai_stream *io, +- int i, int sync) +-{ +- struct device *dev = dmaen->chan->device->dev; +- enum dma_data_direction dir; +- int is_play = rsnd_io_is_play(io); +- dma_addr_t buf; +- int len, max; +- size_t period; +- +- len = dmaen->dma_len; +- period = dmaen->dma_period; +- max = len / period; +- i = i % max; +- buf = dmaen->dma_buf + (period * i); +- +- dir = is_play ? DMA_TO_DEVICE : DMA_FROM_DEVICE; +- +- if (sync) +- dma_sync_single_for_device(dev, buf, period, dir); +- else +- dma_sync_single_for_cpu(dev, buf, period, dir); +-} +- + static void __rsnd_dmaen_complete(struct rsnd_mod *mod, + struct rsnd_dai_stream *io) + { + struct rsnd_priv *priv = rsnd_mod_to_priv(mod); +- struct rsnd_dma *dma = rsnd_mod_to_dma(mod); +- struct rsnd_dmaen *dmaen = rsnd_dma_to_dmaen(dma); + bool elapsed = false; + unsigned long flags; + +@@ -115,22 +84,9 @@ static void __rsnd_dmaen_complete(struct rsnd_mod *mod, + */ + spin_lock_irqsave(&priv->lock, flags); + +- if (rsnd_io_is_working(io)) { +- rsnd_dmaen_unsync(dmaen, io, dmaen->dma_cnt); +- +- /* +- * Next period is already started. +- * Let's sync Next Next period +- * see +- * rsnd_dmaen_start() +- */ +- rsnd_dmaen_sync(dmaen, io, dmaen->dma_cnt + 2); +- ++ if (rsnd_io_is_working(io)) + elapsed = true; + +- dmaen->dma_cnt++; +- } +- + spin_unlock_irqrestore(&priv->lock, flags); + + if (elapsed) +@@ -165,14 +121,8 @@ static int rsnd_dmaen_stop(struct rsnd_mod *mod, + struct rsnd_dma *dma = rsnd_mod_to_dma(mod); + struct rsnd_dmaen *dmaen = rsnd_dma_to_dmaen(dma); + +- if (dmaen->chan) { +- int is_play = rsnd_io_is_play(io); +- ++ if (dmaen->chan) + dmaengine_terminate_all(dmaen->chan); +- dma_unmap_single(dmaen->chan->device->dev, +- dmaen->dma_buf, dmaen->dma_len, +- is_play ? DMA_TO_DEVICE : DMA_FROM_DEVICE); +- } + + return 0; + } +@@ -237,11 +187,7 @@ static int rsnd_dmaen_start(struct rsnd_mod *mod, + struct device *dev = rsnd_priv_to_dev(priv); + struct dma_async_tx_descriptor *desc; + struct dma_slave_config cfg = {}; +- dma_addr_t buf; +- size_t len; +- size_t period; + int is_play = rsnd_io_is_play(io); +- int i; + int ret; + + cfg.direction = is_play ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM; +@@ -258,19 +204,10 @@ static int rsnd_dmaen_start(struct rsnd_mod *mod, + if (ret < 0) + return ret; + +- len = snd_pcm_lib_buffer_bytes(substream); +- period = snd_pcm_lib_period_bytes(substream); +- buf = dma_map_single(dmaen->chan->device->dev, +- substream->runtime->dma_area, +- len, +- is_play ? DMA_TO_DEVICE : DMA_FROM_DEVICE); +- if (dma_mapping_error(dmaen->chan->device->dev, buf)) { +- dev_err(dev, "dma map failed\n"); +- return -EIO; +- } +- + desc = dmaengine_prep_dma_cyclic(dmaen->chan, +- buf, len, period, ++ substream->runtime->dma_addr, ++ snd_pcm_lib_buffer_bytes(substream), ++ snd_pcm_lib_period_bytes(substream), + is_play ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + +@@ -282,18 +219,7 @@ static int rsnd_dmaen_start(struct rsnd_mod *mod, + desc->callback = rsnd_dmaen_complete; + desc->callback_param = rsnd_mod_get(dma); + +- dmaen->dma_buf = buf; +- dmaen->dma_len = len; +- dmaen->dma_period = period; +- dmaen->dma_cnt = 0; +- +- /* +- * synchronize this and next period +- * see +- * __rsnd_dmaen_complete() +- */ +- for (i = 0; i < 2; i++) +- rsnd_dmaen_sync(dmaen, io, i); ++ dmaen->dma_len = snd_pcm_lib_buffer_bytes(substream); + + dmaen->cookie = dmaengine_submit(desc); + if (dmaen->cookie < 0) { +-- +1.9.1 + diff --git a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0004-m3ulcb-ADSP-enable.patch b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0004-m3ulcb-ADSP-enable.patch new file mode 100644 index 0000000..5e54109 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/0004-m3ulcb-ADSP-enable.patch @@ -0,0 +1,30 @@ +diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts +index a1f3c244b83e..b08e94430bea 100644 +--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts ++++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts +@@ -49,6 +49,13 @@ + reg = <0x00000000 0x54000000 0x0 0x03000000>; + }; + ++ /* For Audio DSP */ ++ adsp_reserved: linux,adsp { ++ compatible = "shared-dma-pool"; ++ reusable; ++ reg = <0x00000000 0x57000000 0x0 0x01000000>; ++ }; ++ + /* global autoconfigured region for contiguous allocations */ + linux,cma { + compatible = "shared-dma-pool"; +@@ -388,6 +395,11 @@ + status = "okay"; + }; + ++&adsp { ++ status = "okay"; ++ memory-region = <&adsp_reserved>; ++}; ++ + &scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; diff --git a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/defconfig b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/defconfig new file mode 100644 index 0000000..63c00c8 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/defconfig @@ -0,0 +1,5715 @@ +# +# Automatically generated file; DO NOT EDIT. +# Linux/arm64 4.9.0 Kernel Configuration +# +CONFIG_ARM64=y +CONFIG_64BIT=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y +CONFIG_MMU=y +CONFIG_DEBUG_RODATA=y +CONFIG_ARM64_PAGE_SHIFT=12 +CONFIG_ARM64_CONT_SHIFT=4 +CONFIG_ARCH_MMAP_RND_BITS_MIN=18 +CONFIG_ARCH_MMAP_RND_BITS_MAX=33 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16 +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CSUM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA=y +CONFIG_HAVE_GENERIC_RCU_GUP=y +CONFIG_ARCH_DMA_ADDR_T_64BIT=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_SG_DMA_LENGTH=y +CONFIG_SMP=y +CONFIG_SWIOTLB=y +CONFIG_IOMMU_HELPER=y +CONFIG_KERNEL_MODE_NEON=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_PGTABLE_LEVELS=4 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_IRQ_WORK=y +CONFIG_BUILDTIME_EXTABLE_SORT=y + +# +# General setup +# +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_CROSS_COMPILE="" +# CONFIG_COMPILE_TEST is not set +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_DEFAULT_HOSTNAME="(none)" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_CROSS_MEMORY_ATTACH=y +CONFIG_FHANDLE=y +# CONFIG_USELIB is not set +CONFIG_AUDIT=y +CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_WATCH=y +CONFIG_AUDIT_TREE=y + +# +# IRQ subsystem +# +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +CONFIG_GENERIC_IRQ_MIGRATION=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_DOMAIN_HIERARCHY=y +CONFIG_GENERIC_MSI_IRQ=y +CONFIG_GENERIC_MSI_IRQ_DOMAIN=y +CONFIG_HANDLE_DOMAIN_IRQ=y +# CONFIG_IRQ_DOMAIN_DEBUG is not set +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_SPARSE_IRQ=y +CONFIG_ARCH_CLOCKSOURCE_DATA=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_ARCH_HAS_TICK_BROADCAST=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y + +# +# Timers subsystem +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ_COMMON=y +# CONFIG_HZ_PERIODIC is not set +CONFIG_NO_HZ_IDLE=y +# CONFIG_NO_HZ_FULL is not set +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y + +# +# CPU/Task time and stats accounting +# +CONFIG_TICK_CPU_ACCOUNTING=y +# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set +# CONFIG_IRQ_TIME_ACCOUNTING is not set +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y + +# +# RCU Subsystem +# +CONFIG_PREEMPT_RCU=y +# CONFIG_RCU_EXPERT is not set +CONFIG_SRCU=y +# CONFIG_TASKS_RCU is not set +CONFIG_RCU_STALL_COMMON=y +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_RCU_EXPEDITE_BOOT is not set +CONFIG_BUILD_BIN2C=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y +CONFIG_CGROUPS=y +CONFIG_PAGE_COUNTER=y +CONFIG_MEMCG=y +CONFIG_MEMCG_SWAP=y +CONFIG_MEMCG_SWAP_ENABLED=y +CONFIG_BLK_CGROUP=y +# CONFIG_DEBUG_BLK_CGROUP is not set +CONFIG_CGROUP_WRITEBACK=y +CONFIG_CGROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_CFS_BANDWIDTH is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_CGROUP_PIDS=y +# CONFIG_CGROUP_FREEZER is not set +CONFIG_CGROUP_HUGETLB=y +CONFIG_CPUSETS=y +CONFIG_PROC_PID_CPUSET=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_CGROUP_PERF=y +# CONFIG_CGROUP_DEBUG is not set +# CONFIG_CHECKPOINT_RESTORE is not set +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_NET_NS=y +CONFIG_SCHED_AUTOGROUP=y +# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_XZ=y +CONFIG_RD_LZO=y +CONFIG_RD_LZ4=y +CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_HAVE_UID16=y +CONFIG_SYSCTL_EXCEPTION_TRACE=y +CONFIG_BPF=y +# CONFIG_EXPERT is not set +CONFIG_UID16=y +CONFIG_MULTIUSER=y +# CONFIG_SGETMASK_SYSCALL is not set +CONFIG_SYSFS_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set +CONFIG_KALLSYMS_BASE_RELATIVE=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +# CONFIG_BPF_SYSCALL is not set +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_ADVISE_SYSCALLS=y +# CONFIG_USERFAULTFD is not set +CONFIG_PCI_QUIRKS=y +CONFIG_MEMBARRIER=y +# CONFIG_EMBEDDED is not set +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLAB_FREELIST_RANDOM is not set +CONFIG_SLUB_CPU_PARTIAL=y +# CONFIG_SYSTEM_DATA_VERIFICATION is not set +CONFIG_PROFILING=y +CONFIG_KEXEC_CORE=y +# CONFIG_KPROBES is not set +CONFIG_JUMP_LABEL=y +# CONFIG_STATIC_KEYS_SELFTEST is not set +# CONFIG_UPROBES is not set +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_HW_BREAKPOINT=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_RCU_TABLE_FREE=y +CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y +CONFIG_HAVE_CMPXCHG_LOCAL=y +CONFIG_HAVE_CMPXCHG_DOUBLE=y +CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_SECCOMP_FILTER=y +CONFIG_HAVE_GCC_PLUGINS=y +# CONFIG_GCC_PLUGINS is not set +CONFIG_HAVE_CC_STACKPROTECTOR=y +# CONFIG_CC_STACKPROTECTOR is not set +CONFIG_CC_STACKPROTECTOR_NONE=y +# CONFIG_CC_STACKPROTECTOR_REGULAR is not set +# CONFIG_CC_STACKPROTECTOR_STRONG is not set +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y +CONFIG_HAVE_ARCH_HUGE_VMAP=y +CONFIG_MODULES_USE_ELF_RELA=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y +CONFIG_HAVE_ARCH_MMAP_RND_BITS=y +CONFIG_ARCH_MMAP_RND_BITS=18 +CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y +CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11 +# CONFIG_HAVE_ARCH_HASH is not set +# CONFIG_ISA_BUS_API is not set +CONFIG_CLONE_BACKWARDS=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_COMPAT_OLD_SIGACTION=y +# CONFIG_CPU_NO_EFFICIENT_FFS is not set +# CONFIG_HAVE_ARCH_VMAP_STACK is not set + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_MODULE_SIG is not set +# CONFIG_MODULE_COMPRESS is not set +# CONFIG_TRIM_UNUSED_KSYMS is not set +CONFIG_MODULES_TREE_LOOKUP=y +CONFIG_BLOCK=y +CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_BSGLIB is not set +CONFIG_BLK_DEV_INTEGRITY=y +# CONFIG_BLK_DEV_THROTTLING is not set +# CONFIG_BLK_CMDLINE_PARSER is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_EFI_PARTITION=y +CONFIG_BLOCK_COMPAT=y +CONFIG_BLK_MQ_PCI=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_CFQ_GROUP_IOSCHED is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_PREEMPT_NOTIFIERS=y +CONFIG_UNINLINE_SPIN_UNLOCK=y +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_LOCK_SPIN_ON_OWNER=y +CONFIG_FREEZER=y + +# +# Platform selection +# +CONFIG_ARCH_SUNXI=y +CONFIG_ARCH_ALPINE=y +# CONFIG_ARCH_BCM2835 is not set +CONFIG_ARCH_BCM_IPROC=y +CONFIG_ARCH_BERLIN=y +# CONFIG_ARCH_BRCMSTB is not set +CONFIG_ARCH_EXYNOS=y +CONFIG_ARCH_LAYERSCAPE=y +CONFIG_ARCH_LG1K=y +CONFIG_ARCH_HISI=y +CONFIG_ARCH_MEDIATEK=y +CONFIG_ARCH_MESON=y +CONFIG_ARCH_MVEBU=y +CONFIG_ARCH_QCOM=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_ARCH_SEATTLE=y +CONFIG_ARCH_SHMOBILE=y +CONFIG_ARCH_RENESAS=y +CONFIG_ARCH_R8A7795=y +CONFIG_ARCH_R8A7796=y +CONFIG_ARCH_STRATIX10=y +CONFIG_ARCH_TEGRA=y +CONFIG_ARCH_SPRD=y +CONFIG_ARCH_THUNDER=y +CONFIG_ARCH_UNIPHIER=y +CONFIG_ARCH_VEXPRESS=y +CONFIG_ARCH_VULCAN=y +CONFIG_ARCH_XGENE=y +CONFIG_ARCH_ZX=y +CONFIG_ARCH_ZYNQMP=y + +# +# Bus support +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_DOMAINS_GENERIC=y +CONFIG_PCI_SYSCALL=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCIEAER=y +# CONFIG_PCIE_ECRC is not set +# CONFIG_PCIEAER_INJECT is not set +CONFIG_PCIEASPM=y +# CONFIG_PCIEASPM_DEBUG is not set +CONFIG_PCIEASPM_DEFAULT=y +# CONFIG_PCIEASPM_POWERSAVE is not set +# CONFIG_PCIEASPM_PERFORMANCE is not set +CONFIG_PCIE_PME=y +# CONFIG_PCIE_DPC is not set +# CONFIG_PCIE_PTM is not set +CONFIG_PCI_BUS_ADDR_T_64BIT=y +CONFIG_PCI_MSI=y +CONFIG_PCI_MSI_IRQ_DOMAIN=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set +# CONFIG_PCI_STUB is not set +CONFIG_PCI_ATS=y +CONFIG_PCI_ECAM=y +CONFIG_PCI_IOV=y +# CONFIG_PCI_PRI is not set +# CONFIG_PCI_PASID is not set +CONFIG_PCI_LABEL=y +# CONFIG_HOTPLUG_PCI is not set + +# +# PCI host controller drivers +# +CONFIG_PCI_AARDVARK=y +# CONFIG_PCIE_XILINX_NWL is not set +# CONFIG_PCIE_DW_PLAT is not set +CONFIG_PCIE_DW=y +CONFIG_PCIE_RCAR=y +CONFIG_PCI_HOST_COMMON=y +CONFIG_PCI_HOST_GENERIC=y +CONFIG_PCI_XGENE=y +CONFIG_PCI_XGENE_MSI=y +CONFIG_PCI_LAYERSCAPE=y +CONFIG_PCIE_IPROC=y +CONFIG_PCIE_IPROC_PLATFORM=y +CONFIG_PCIE_IPROC_MSI=y +CONFIG_PCI_HISI=y +CONFIG_PCIE_QCOM=y +# CONFIG_PCI_HOST_THUNDER_PEM is not set +# CONFIG_PCI_HOST_THUNDER_ECAM is not set +CONFIG_PCIE_ARMADA_8K=y +# CONFIG_PCIE_ROCKCHIP is not set + +# +# Kernel Features +# + +# +# ARM errata workarounds via the alternatives framework +# +CONFIG_ARM64_ERRATUM_826319=y +CONFIG_ARM64_ERRATUM_827319=y +CONFIG_ARM64_ERRATUM_824069=y +CONFIG_ARM64_ERRATUM_819472=y +CONFIG_ARM64_ERRATUM_832075=y +CONFIG_ARM64_ERRATUM_834220=y +CONFIG_ARM64_ERRATUM_845719=y +CONFIG_ARM64_ERRATUM_843419=y +CONFIG_CAVIUM_ERRATUM_22375=y +CONFIG_CAVIUM_ERRATUM_23154=y +CONFIG_CAVIUM_ERRATUM_27456=y +CONFIG_ARM64_4K_PAGES=y +# CONFIG_ARM64_16K_PAGES is not set +# CONFIG_ARM64_64K_PAGES is not set +# CONFIG_ARM64_VA_BITS_39 is not set +CONFIG_ARM64_VA_BITS_48=y +CONFIG_ARM64_VA_BITS=48 +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SCHED_MC=y +# CONFIG_SCHED_SMT is not set +CONFIG_NR_CPUS=64 +CONFIG_HOTPLUG_CPU=y +# CONFIG_NUMA is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_COUNT=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_HAVE_ARCH_PFN_VALID=y +CONFIG_HW_PERF_EVENTS=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y +CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_SPARSEMEM_VMEMMAP=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_NO_BOOTMEM=y +CONFIG_MEMORY_ISOLATION=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MEMORY_BALLOON=y +CONFIG_BALLOON_COMPACTION=y +CONFIG_COMPACTION=y +CONFIG_MIGRATION=y +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_BOUNCE=y +CONFIG_MMU_NOTIFIER=y +CONFIG_KSM=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y +# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set +CONFIG_TRANSPARENT_HUGE_PAGECACHE=y +# CONFIG_CLEANCACHE is not set +# CONFIG_FRONTSWAP is not set +CONFIG_CMA=y +# CONFIG_CMA_DEBUG is not set +# CONFIG_CMA_DEBUGFS is not set +CONFIG_CMA_AREAS=7 +# CONFIG_ZPOOL is not set +# CONFIG_ZBUD is not set +# CONFIG_ZSMALLOC is not set +CONFIG_GENERIC_EARLY_IOREMAP=y +# CONFIG_IDLE_PAGE_TRACKING is not set +CONFIG_FRAME_VECTOR=y +CONFIG_SECCOMP=y +CONFIG_PARAVIRT=y +# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set +CONFIG_KEXEC=y +CONFIG_XEN_DOM0=y +CONFIG_XEN=y +CONFIG_FORCE_MAX_ZONEORDER=11 +# CONFIG_ARMV8_DEPRECATED is not set + +# +# ARMv8.1 architectural features +# +CONFIG_ARM64_HW_AFDBM=y +CONFIG_ARM64_PAN=y +# CONFIG_ARM64_LSE_ATOMICS is not set +CONFIG_ARM64_VHE=y + +# +# ARMv8.2 architectural features +# +CONFIG_ARM64_UAO=y +CONFIG_ARM64_MODULE_CMODEL_LARGE=y +# CONFIG_RANDOMIZE_BASE is not set + +# +# Boot options +# +# CONFIG_ARM64_ACPI_PARKING_PROTOCOL is not set +CONFIG_CMDLINE="" +# CONFIG_CMDLINE_FORCE is not set +CONFIG_EFI_STUB=y +CONFIG_EFI=y +CONFIG_DMI=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_COMPAT_BINFMT_ELF=y +CONFIG_ELFCORE=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_SCRIPT=y +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_COREDUMP=y +CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y + +# +# Power management options +# +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_HIBERNATION is not set +CONFIG_PM_SLEEP=y +CONFIG_PM_SLEEP_SMP=y +# CONFIG_PM_AUTOSLEEP is not set +# CONFIG_PM_WAKELOCKS is not set +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_OPP=y +CONFIG_PM_CLK=y +CONFIG_PM_GENERIC_DOMAINS=y +# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set +CONFIG_PM_GENERIC_DOMAINS_SLEEP=y +CONFIG_PM_GENERIC_DOMAINS_OF=y +CONFIG_CPU_PM=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# CPU Power Management +# + +# +# CPU Idle +# +CONFIG_CPU_IDLE=y +# CONFIG_CPU_IDLE_GOV_LADDER is not set +CONFIG_CPU_IDLE_GOV_MENU=y +CONFIG_DT_IDLE_STATES=y + +# +# ARM CPU Idle Drivers +# +CONFIG_ARM_CPUIDLE=y +# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_GOV_ATTR_SET=y +CONFIG_CPU_FREQ_GOV_COMMON=y +# CONFIG_CPU_FREQ_STAT is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y + +# +# CPU frequency scaling drivers +# +CONFIG_CPUFREQ_DT=y +CONFIG_CPUFREQ_DT_PLATDEV=y +CONFIG_ARM_BIG_LITTLE_CPUFREQ=y +# CONFIG_ARM_DT_BL_CPUFREQ is not set +# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set +# CONFIG_ARM_MT8173_CPUFREQ is not set +CONFIG_ARM_SCPI_CPUFREQ=y +CONFIG_ARM_TEGRA20_CPUFREQ=y +CONFIG_ARM_TEGRA124_CPUFREQ=y +# CONFIG_ACPI_CPPC_CPUFREQ is not set +CONFIG_NET=y +CONFIG_NET_INGRESS=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_DIAG is not set +CONFIG_UNIX=y +# CONFIG_UNIX_DIAG is not set +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE_DEMUX is not set +CONFIG_NET_IP_TUNNEL=m +# CONFIG_IP_MROUTE is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_NET_IPVTI is not set +# CONFIG_NET_UDP_TUNNEL is not set +# CONFIG_NET_FOU is not set +# CONFIG_NET_FOU_IP_TUNNELS is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_INET_UDP_DIAG is not set +# CONFIG_INET_DIAG_DESTROY is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set +# CONFIG_IPV6_ILA is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +# CONFIG_IPV6_VTI is not set +CONFIG_IPV6_SIT=m +# CONFIG_IPV6_SIT_6RD is not set +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_FOU is not set +# CONFIG_IPV6_FOU_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NET_PTP_CLASSIFY=y +# CONFIG_NETWORK_PHY_TIMESTAMPING is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=m + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_INGRESS=y +# CONFIG_NETFILTER_NETLINK_ACCT is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +CONFIG_NF_CONNTRACK=m +CONFIG_NF_LOG_COMMON=m +# CONFIG_NF_CONNTRACK_MARK is not set +CONFIG_NF_CONNTRACK_PROCFS=y +CONFIG_NF_CONNTRACK_EVENTS=y +# CONFIG_NF_CONNTRACK_TIMEOUT is not set +# CONFIG_NF_CONNTRACK_TIMESTAMP is not set +# CONFIG_NF_CT_PROTO_DCCP is not set +# CONFIG_NF_CT_PROTO_SCTP is not set +# CONFIG_NF_CT_PROTO_UDPLITE is not set +# CONFIG_NF_CONNTRACK_AMANDA is not set +# CONFIG_NF_CONNTRACK_FTP is not set +# CONFIG_NF_CONNTRACK_H323 is not set +# CONFIG_NF_CONNTRACK_IRC is not set +# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set +# CONFIG_NF_CONNTRACK_SNMP is not set +# CONFIG_NF_CONNTRACK_PPTP is not set +# CONFIG_NF_CONNTRACK_SANE is not set +# CONFIG_NF_CONNTRACK_SIP is not set +# CONFIG_NF_CONNTRACK_TFTP is not set +# CONFIG_NF_CT_NETLINK is not set +# CONFIG_NF_CT_NETLINK_TIMEOUT is not set +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +# CONFIG_NF_NAT_AMANDA is not set +# CONFIG_NF_NAT_FTP is not set +# CONFIG_NF_NAT_IRC is not set +# CONFIG_NF_NAT_SIP is not set +# CONFIG_NF_NAT_TFTP is not set +# CONFIG_NF_NAT_REDIRECT is not set +# CONFIG_NF_TABLES is not set +CONFIG_NETFILTER_XTABLES=m + +# +# Xtables combined modules +# +# CONFIG_NETFILTER_XT_MARK is not set +# CONFIG_NETFILTER_XT_CONNMARK is not set + +# +# Xtables targets +# +# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_HL is not set +# CONFIG_NETFILTER_XT_TARGET_HMARK is not set +# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set +# CONFIG_NETFILTER_XT_TARGET_LED is not set +CONFIG_NETFILTER_XT_TARGET_LOG=m +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +CONFIG_NETFILTER_XT_NAT=m +# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set +# CONFIG_NETFILTER_XT_TARGET_TEE is not set +# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set + +# +# Xtables matches +# +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +# CONFIG_NETFILTER_XT_MATCH_BPF is not set +# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set +# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set +# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +# CONFIG_NETFILTER_XT_MATCH_CPU is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ECN is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_HELPER is not set +# CONFIG_NETFILTER_XT_MATCH_HL is not set +# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +# CONFIG_NETFILTER_XT_MATCH_L2TP is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set +# CONFIG_NETFILTER_XT_MATCH_STATE is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_IP_SET is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +# CONFIG_NF_DUP_IPV4 is not set +# CONFIG_NF_LOG_ARP is not set +CONFIG_NF_LOG_IPV4=m +CONFIG_NF_REJECT_IPV4=m +CONFIG_NF_NAT_IPV4=m +CONFIG_NF_NAT_MASQUERADE_IPV4=m +# CONFIG_NF_NAT_PPTP is not set +# CONFIG_NF_NAT_H323 is not set +CONFIG_IP_NF_IPTABLES=m +# CONFIG_IP_NF_MATCH_AH is not set +# CONFIG_IP_NF_MATCH_ECN is not set +# CONFIG_IP_NF_MATCH_RPFILTER is not set +# CONFIG_IP_NF_MATCH_TTL is not set +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +# CONFIG_IP_NF_TARGET_SYNPROXY is not set +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_TARGET_MASQUERADE=m +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_REDIRECT is not set +CONFIG_IP_NF_MANGLE=m +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_TTL is not set +# CONFIG_IP_NF_RAW is not set +# CONFIG_IP_NF_SECURITY is not set +# CONFIG_IP_NF_ARPTABLES is not set + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV6=m +CONFIG_NF_CONNTRACK_IPV6=m +# CONFIG_NF_DUP_IPV6 is not set +CONFIG_NF_REJECT_IPV6=m +CONFIG_NF_LOG_IPV6=m +CONFIG_NF_NAT_IPV6=m +CONFIG_NF_NAT_MASQUERADE_IPV6=m +CONFIG_IP6_NF_IPTABLES=m +# CONFIG_IP6_NF_MATCH_AH is not set +# CONFIG_IP6_NF_MATCH_EUI64 is not set +# CONFIG_IP6_NF_MATCH_FRAG is not set +# CONFIG_IP6_NF_MATCH_OPTS is not set +# CONFIG_IP6_NF_MATCH_HL is not set +# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set +# CONFIG_IP6_NF_MATCH_MH is not set +# CONFIG_IP6_NF_MATCH_RPFILTER is not set +# CONFIG_IP6_NF_MATCH_RT is not set +# CONFIG_IP6_NF_TARGET_HL is not set +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +# CONFIG_IP6_NF_TARGET_SYNPROXY is not set +CONFIG_IP6_NF_MANGLE=m +# CONFIG_IP6_NF_RAW is not set +# CONFIG_IP6_NF_SECURITY is not set +CONFIG_IP6_NF_NAT=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +# CONFIG_IP6_NF_TARGET_NPT is not set +# CONFIG_BRIDGE_NF_EBTABLES is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_L2TP is not set +CONFIG_STP=m +CONFIG_GARP=m +CONFIG_MRP=m +CONFIG_BRIDGE=m +CONFIG_BRIDGE_IGMP_SNOOPING=y +CONFIG_BRIDGE_VLAN_FILTERING=y +CONFIG_HAVE_NET_DSA=y +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_VLAN_8021Q_MVRP=y +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_PHONET is not set +# CONFIG_6LOWPAN is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set +CONFIG_DNS_RESOLVER=y +# CONFIG_BATMAN_ADV is not set +# CONFIG_OPENVSWITCH is not set +# CONFIG_VSOCKETS is not set +# CONFIG_NETLINK_DIAG is not set +# CONFIG_MPLS is not set +# CONFIG_HSR is not set +# CONFIG_NET_SWITCHDEV is not set +# CONFIG_NET_L3_MASTER_DEV is not set +# CONFIG_QRTR is not set +# CONFIG_NET_NCSI is not set +CONFIG_RPS=y +CONFIG_RFS_ACCEL=y +CONFIG_XPS=y +# CONFIG_SOCK_CGROUP_DATA is not set +# CONFIG_CGROUP_NET_PRIO is not set +# CONFIG_CGROUP_NET_CLASSID is not set +CONFIG_NET_RX_BUSY_POLL=y +CONFIG_BQL=y +CONFIG_BPF_JIT=y +CONFIG_NET_FLOW_LIMIT=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_BREDR=y +# CONFIG_BT_RFCOMM is not set +# CONFIG_BT_BNEP is not set +CONFIG_BT_HIDP=m +# CONFIG_BT_HS is not set +# CONFIG_BT_LE is not set +CONFIG_BT_LEDS=y +# CONFIG_BT_SELFTEST is not set +# CONFIG_BT_DEBUGFS is not set + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIBTUSB is not set +# CONFIG_BT_HCIBTSDIO is not set +CONFIG_BT_HCIUART=m +# CONFIG_BT_HCIUART_H4 is not set +# CONFIG_BT_HCIUART_BCSP is not set +# CONFIG_BT_HCIUART_ATH3K is not set +CONFIG_BT_HCIUART_LL=y +# CONFIG_BT_HCIUART_3WIRE is not set +# CONFIG_BT_HCIUART_INTEL is not set +# CONFIG_BT_HCIUART_BCM is not set +# CONFIG_BT_HCIUART_QCA is not set +# CONFIG_BT_HCIUART_AG6XX is not set +# CONFIG_BT_HCIUART_MRVL is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIVHCI is not set +# CONFIG_BT_MRVL is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_AF_KCM is not set +# CONFIG_STREAM_PARSER is not set +CONFIG_WIRELESS=y +CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +CONFIG_CFG80211_DEFAULT_PS=y +# CONFIG_CFG80211_DEBUGFS is not set +# CONFIG_CFG80211_INTERNAL_REGDB is not set +CONFIG_CFG80211_CRDA_SUPPORT=y +# CONFIG_CFG80211_WEXT is not set +# CONFIG_LIB80211 is not set +CONFIG_MAC80211=m +CONFIG_MAC80211_HAS_RC=y +CONFIG_MAC80211_RC_MINSTREL=y +CONFIG_MAC80211_RC_MINSTREL_HT=y +# CONFIG_MAC80211_RC_MINSTREL_VHT is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_MESSAGE_TRACING is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 +# CONFIG_WIMAX is not set +CONFIG_RFKILL=m +CONFIG_RFKILL_LEDS=y +CONFIG_RFKILL_INPUT=y +# CONFIG_RFKILL_REGULATOR is not set +# CONFIG_RFKILL_GPIO is not set +CONFIG_NET_9P=y +CONFIG_NET_9P_VIRTIO=y +# CONFIG_NET_9P_DEBUG is not set +# CONFIG_CAIF is not set +# CONFIG_CEPH_LIB is not set +# CONFIG_NFC is not set +# CONFIG_LWTUNNEL is not set +CONFIG_DST_CACHE=y +# CONFIG_NET_DEVLINK is not set +CONFIG_MAY_USE_DEVLINK=y +CONFIG_HAVE_EBPF_JIT=y + +# +# Device Drivers +# +CONFIG_ARM_AMBA=y +CONFIG_TEGRA_AHB=y + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set +CONFIG_ALLOW_DEV_COREDUMP=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set +CONFIG_SYS_HYPERVISOR=y +# CONFIG_GENERIC_CPU_DEVICES is not set +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_SOC_BUS=y +CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=y +CONFIG_REGMAP_SPI=y +CONFIG_REGMAP_SPMI=y +CONFIG_REGMAP_MMIO=y +CONFIG_REGMAP_IRQ=y +CONFIG_DMA_SHARED_BUFFER=y +# CONFIG_FENCE_TRACE is not set +CONFIG_DMA_CMA=y + +# +# Default contiguous memory area size: +# +CONFIG_CMA_SIZE_MBYTES=16 +CONFIG_CMA_SIZE_SEL_MBYTES=y +# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set +# CONFIG_CMA_SIZE_SEL_MIN is not set +# CONFIG_CMA_SIZE_SEL_MAX is not set +CONFIG_CMA_ALIGNMENT=8 + +# +# Bus devices +# +# CONFIG_ARM_CCI400_PMU is not set +# CONFIG_ARM_CCI5xx_PMU is not set +# CONFIG_ARM_CCN is not set +# CONFIG_QCOM_EBI2 is not set +# CONFIG_SIMPLE_PM_BUS is not set +# CONFIG_SUNXI_RSB is not set +# CONFIG_TEGRA_ACONNECT is not set +CONFIG_UNIPHIER_SYSTEM_BUS=y +CONFIG_VEXPRESS_CONFIG=y +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_SM_FTL is not set +# CONFIG_MTD_OOPS is not set +# CONFIG_MTD_SWAP is not set +# CONFIG_MTD_PARTITIONED_MASTER is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +CONFIG_MTD_M25P80=y +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOCG3 is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR & LPDDR2 PCM memory drivers +# +# CONFIG_MTD_LPDDR is not set +CONFIG_MTD_SPI_NOR=y +# CONFIG_MTD_MT81xx_NOR is not set +CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y +# CONFIG_SPI_FSL_QUADSPI is not set +# CONFIG_SPI_HISI_SFC is not set +# CONFIG_MTD_UBI is not set +CONFIG_DTC=y +CONFIG_OF=y +# CONFIG_OF_UNITTEST is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_ADDRESS_PCI=y +CONFIG_OF_IRQ=y +CONFIG_OF_NET=y +CONFIG_OF_MDIO=y +CONFIG_OF_PCI=y +CONFIG_OF_PCI_IRQ=y +CONFIG_OF_RESERVED_MEM=y +# CONFIG_OF_OVERLAY is not set +# CONFIG_PARPORT is not set +CONFIG_PNP=y +CONFIG_PNP_DEBUG_MESSAGES=y + +# +# Protocols +# +CONFIG_PNPACPI=y +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_NULL_BLK is not set +# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_DRBD is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SKD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_XEN_BLKDEV_FRONTEND=y +# CONFIG_XEN_BLKDEV_BACKEND is not set +CONFIG_VIRTIO_BLK=y +# CONFIG_BLK_DEV_RBD is not set +# CONFIG_BLK_DEV_RSXX is not set +# CONFIG_BLK_DEV_NVME is not set +# CONFIG_NVME_TARGET is not set + +# +# Misc devices +# +# CONFIG_SENSORS_LIS3LV02D is not set +# CONFIG_AD525X_DPOT is not set +# CONFIG_DUMMY_IRQ is not set +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_QCOM_COINCELL is not set +# CONFIG_APDS9802ALS is not set +# CONFIG_ISL29003 is not set +# CONFIG_ISL29020 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_SENSORS_BH1770 is not set +# CONFIG_SENSORS_APDS990X is not set +# CONFIG_HMC6352 is not set +# CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set +# CONFIG_USB_SWITCH_FSA9480 is not set +# CONFIG_LATTICE_ECP3_CONFIG is not set +CONFIG_SRAM=y +CONFIG_VEXPRESS_SYSCFG=y +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_EEPROM_93XX46 is not set +# CONFIG_CB710_CORE is not set + +# +# Texas Instruments shared transport line discipline +# +# CONFIG_TI_ST is not set +# CONFIG_SENSORS_LIS3_I2C is not set + +# +# Altera FPGA firmware download module +# +# CONFIG_ALTERA_STAPL is not set + +# +# Intel MIC Bus Driver +# + +# +# SCIF Bus Driver +# + +# +# VOP Bus Driver +# + +# +# Intel MIC Host Driver +# + +# +# Intel MIC Card Driver +# + +# +# SCIF Driver +# + +# +# Intel MIC Coprocessor State Management (COSM) Drivers +# + +# +# VOP Driver +# +# CONFIG_GENWQE is not set +# CONFIG_ECHO is not set +# CONFIG_CXL_BASE is not set +# CONFIG_CXL_AFU_DRIVER_OPS is not set + +# +# SCSI device support +# +CONFIG_SCSI_MOD=y +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_MQ_DEFAULT is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +CONFIG_SCSI_SAS_ATTRS=y +CONFIG_SCSI_SAS_LIBSAS=y +CONFIG_SCSI_SAS_ATA=y +CONFIG_SCSI_SAS_HOST_SMP=y +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_ISCSI_BOOT_SYSFS is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set +# CONFIG_SCSI_CXGB4_ISCSI is not set +# CONFIG_SCSI_BNX2_ISCSI is not set +# CONFIG_BE2ISCSI is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_HPSA is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +CONFIG_SCSI_HISI_SAS=y +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_MVUMI is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_SCSI_ESAS2R is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT3SAS is not set +# CONFIG_SCSI_MPT2SAS is not set +# CONFIG_SCSI_SMARTPQI is not set +# CONFIG_SCSI_UFSHCD is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_XEN_SCSI_FRONTEND is not set +# CONFIG_SCSI_SNIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_AM53C974 is not set +# CONFIG_SCSI_WD719X is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set +# CONFIG_SCSI_VIRTIO is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +CONFIG_HAVE_PATA_PLATFORM=y +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_ATA_VERBOSE_ERROR=y +CONFIG_ATA_ACPI=y +# CONFIG_SATA_ZPODD is not set +CONFIG_SATA_PMP=y + +# +# Controllers with non-SFF native interface +# +CONFIG_SATA_AHCI=y +CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_AHCI_CEVA=y +CONFIG_AHCI_MVEBU=y +# CONFIG_AHCI_SUNXI is not set +# CONFIG_AHCI_TEGRA is not set +CONFIG_AHCI_XGENE=y +CONFIG_AHCI_QORIQ=y +# CONFIG_SATA_AHCI_SEATTLE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_SATA_ACARD_AHCI is not set +CONFIG_SATA_SIL24=y +CONFIG_ATA_SFF=y + +# +# SFF controllers with custom DMA interface +# +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_SX4 is not set +CONFIG_ATA_BMDMA=y + +# +# SATA SFF controllers with BMDMA +# +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_DWC is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_SATA_PROMISE is not set +CONFIG_SATA_RCAR=y +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_SVW is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set + +# +# PATA SFF controllers with BMDMA +# +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_ATP867X is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set +# CONFIG_PATA_SCH is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set + +# +# PIO-only SFF controllers +# +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +CONFIG_PATA_PLATFORM=y +CONFIG_PATA_OF_PLATFORM=y +# CONFIG_PATA_RZ1000 is not set + +# +# Generic fallback / legacy drivers +# +# CONFIG_PATA_ACPI is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_LEGACY is not set +# CONFIG_MD is not set +# CONFIG_TARGET_CORE is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_FIREWIRE_NOSY is not set +CONFIG_NETDEVICES=y +CONFIG_MII=y +CONFIG_NET_CORE=y +# CONFIG_BONDING is not set +# CONFIG_DUMMY is not set +# CONFIG_EQUALIZER is not set +# CONFIG_NET_FC is not set +# CONFIG_NET_TEAM is not set +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m +# CONFIG_VXLAN is not set +# CONFIG_MACSEC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +CONFIG_TUN=y +# CONFIG_TUN_VNET_CROSS_LE is not set +CONFIG_VETH=m +CONFIG_VIRTIO_NET=y +# CONFIG_NLMON is not set +# CONFIG_ARCNET is not set + +# +# CAIF transport drivers +# + +# +# Distributed Switch Architecture drivers +# +CONFIG_ETHERNET=y +CONFIG_NET_VENDOR_3COM=y +# CONFIG_VORTEX is not set +# CONFIG_TYPHOON is not set +CONFIG_NET_VENDOR_ADAPTEC=y +# CONFIG_ADAPTEC_STARFIRE is not set +CONFIG_NET_VENDOR_AGERE=y +# CONFIG_ET131X is not set +CONFIG_NET_VENDOR_ALLWINNER=y +# CONFIG_SUN4I_EMAC is not set +CONFIG_NET_VENDOR_ALTEON=y +# CONFIG_ACENIC is not set +# CONFIG_ALTERA_TSE is not set +CONFIG_NET_VENDOR_AMAZON=y +CONFIG_NET_VENDOR_AMD=y +# CONFIG_AMD8111_ETH is not set +# CONFIG_PCNET32 is not set +CONFIG_AMD_XGBE=y +CONFIG_NET_XGENE=y +CONFIG_NET_VENDOR_ARC=y +# CONFIG_ARC_EMAC is not set +# CONFIG_EMAC_ROCKCHIP is not set +CONFIG_NET_VENDOR_ATHEROS=y +# CONFIG_ATL2 is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_ALX is not set +# CONFIG_NET_VENDOR_AURORA is not set +CONFIG_NET_CADENCE=y +CONFIG_MACB=y +CONFIG_NET_VENDOR_BROADCOM=y +# CONFIG_B44 is not set +# CONFIG_BCMGENET is not set +# CONFIG_BNX2 is not set +# CONFIG_CNIC is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2X is not set +CONFIG_BGMAC=y +CONFIG_BGMAC_PLATFORM=y +# CONFIG_SYSTEMPORT is not set +# CONFIG_BNXT is not set +CONFIG_NET_VENDOR_BROCADE=y +# CONFIG_BNA is not set +CONFIG_NET_VENDOR_CAVIUM=y +# CONFIG_THUNDER_NIC_PF is not set +# CONFIG_THUNDER_NIC_VF is not set +# CONFIG_THUNDER_NIC_BGX is not set +# CONFIG_THUNDER_NIC_RGX is not set +# CONFIG_LIQUIDIO is not set +CONFIG_NET_VENDOR_CHELSIO=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_CHELSIO_T4 is not set +# CONFIG_CHELSIO_T4VF is not set +CONFIG_NET_VENDOR_CISCO=y +# CONFIG_ENIC is not set +# CONFIG_DNET is not set +CONFIG_NET_VENDOR_DEC=y +# CONFIG_NET_TULIP is not set +CONFIG_NET_VENDOR_DLINK=y +# CONFIG_DL2K is not set +# CONFIG_SUNDANCE is not set +CONFIG_NET_VENDOR_EMULEX=y +# CONFIG_BE2NET is not set +CONFIG_NET_VENDOR_EZCHIP=y +# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set +CONFIG_NET_VENDOR_EXAR=y +# CONFIG_S2IO is not set +# CONFIG_VXGE is not set +CONFIG_NET_VENDOR_FREESCALE=y +# CONFIG_FSL_PQ_MDIO is not set +# CONFIG_FSL_XGMAC_MDIO is not set +# CONFIG_GIANFAR is not set +CONFIG_NET_VENDOR_HISILICON=y +# CONFIG_HIX5HD2_GMAC is not set +# CONFIG_HISI_FEMAC is not set +# CONFIG_HIP04_ETH is not set +CONFIG_HNS_MDIO=y +CONFIG_HNS=y +CONFIG_HNS_DSAF=y +CONFIG_HNS_ENET=y +CONFIG_NET_VENDOR_HP=y +# CONFIG_HP100 is not set +CONFIG_NET_VENDOR_INTEL=y +# CONFIG_E100 is not set +# CONFIG_E1000 is not set +CONFIG_E1000E=y +CONFIG_IGB=y +CONFIG_IGB_HWMON=y +CONFIG_IGBVF=y +# CONFIG_IXGB is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGBEVF is not set +# CONFIG_I40E is not set +# CONFIG_I40EVF is not set +# CONFIG_FM10K is not set +CONFIG_NET_VENDOR_I825XX=y +# CONFIG_JME is not set +CONFIG_NET_VENDOR_MARVELL=y +# CONFIG_MVMDIO is not set +# CONFIG_MVNETA_BM is not set +# CONFIG_PXA168_ETH is not set +# CONFIG_SKGE is not set +CONFIG_SKY2=y +# CONFIG_SKY2_DEBUG is not set +# CONFIG_NET_VENDOR_MEDIATEK is not set +CONFIG_NET_VENDOR_MELLANOX=y +# CONFIG_MLX4_EN is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_MLX5_CORE is not set +# CONFIG_MLXSW_CORE is not set +CONFIG_NET_VENDOR_MICREL=y +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_KSZ884X_PCI is not set +CONFIG_NET_VENDOR_MICROCHIP=y +# CONFIG_ENC28J60 is not set +# CONFIG_ENCX24J600 is not set +CONFIG_NET_VENDOR_MYRI=y +# CONFIG_MYRI10GE is not set +# CONFIG_FEALNX is not set +CONFIG_NET_VENDOR_NATSEMI=y +# CONFIG_NATSEMI is not set +# CONFIG_NS83820 is not set +CONFIG_NET_VENDOR_NETRONOME=y +# CONFIG_NFP_NETVF is not set +CONFIG_NET_VENDOR_8390=y +# CONFIG_NE2K_PCI is not set +CONFIG_NET_VENDOR_NVIDIA=y +# CONFIG_FORCEDETH is not set +CONFIG_NET_VENDOR_OKI=y +# CONFIG_ETHOC is not set +CONFIG_NET_PACKET_ENGINE=y +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_NET_VENDOR_QLOGIC=y +# CONFIG_QLA3XXX is not set +# CONFIG_QLCNIC is not set +# CONFIG_QLGE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_QED is not set +CONFIG_NET_VENDOR_QUALCOMM=y +# CONFIG_QCA7000 is not set +# CONFIG_QCOM_EMAC is not set +CONFIG_NET_VENDOR_REALTEK=y +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_R8169 is not set +CONFIG_NET_VENDOR_RENESAS=y +# CONFIG_SH_ETH is not set +CONFIG_RAVB=y +CONFIG_NET_VENDOR_RDC=y +# CONFIG_R6040 is not set +CONFIG_NET_VENDOR_ROCKER=y +CONFIG_NET_VENDOR_SAMSUNG=y +# CONFIG_SXGBE_ETH is not set +CONFIG_NET_VENDOR_SEEQ=y +CONFIG_NET_VENDOR_SILAN=y +# CONFIG_SC92031 is not set +CONFIG_NET_VENDOR_SIS=y +# CONFIG_SIS900 is not set +# CONFIG_SIS190 is not set +# CONFIG_SFC is not set +CONFIG_NET_VENDOR_SMSC=y +CONFIG_SMC91X=y +# CONFIG_EPIC100 is not set +CONFIG_SMSC911X=y +# CONFIG_SMSC911X_ARCH_HOOKS is not set +# CONFIG_SMSC9420 is not set +CONFIG_NET_VENDOR_STMICRO=y +CONFIG_STMMAC_ETH=m +CONFIG_STMMAC_PLATFORM=m +CONFIG_DWMAC_GENERIC=m +CONFIG_DWMAC_IPQ806X=m +CONFIG_DWMAC_MESON=m +CONFIG_DWMAC_ROCKCHIP=m +CONFIG_DWMAC_SUNXI=m +# CONFIG_STMMAC_PCI is not set +CONFIG_NET_VENDOR_SUN=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NIU is not set +CONFIG_NET_VENDOR_SYNOPSYS=y +# CONFIG_SYNOPSYS_DWC_ETH_QOS is not set +CONFIG_NET_VENDOR_TEHUTI=y +# CONFIG_TEHUTI is not set +CONFIG_NET_VENDOR_TI=y +# CONFIG_TI_CPSW_ALE is not set +# CONFIG_TLAN is not set +CONFIG_NET_VENDOR_VIA=y +# CONFIG_VIA_RHINE is not set +# CONFIG_VIA_VELOCITY is not set +CONFIG_NET_VENDOR_WIZNET=y +# CONFIG_WIZNET_W5100 is not set +# CONFIG_WIZNET_W5300 is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_NET_SB1000 is not set +CONFIG_PHYLIB=y +CONFIG_SWPHY=y + +# +# MDIO bus device drivers +# +# CONFIG_MDIO_BCM_IPROC is not set +# CONFIG_MDIO_BCM_UNIMAC is not set +CONFIG_MDIO_BITBANG=y +CONFIG_MDIO_BUS_MUX=y +CONFIG_MDIO_BUS_MUX_BCM_IPROC=y +# CONFIG_MDIO_BUS_MUX_GPIO is not set +# CONFIG_MDIO_BUS_MUX_MMIOREG is not set +# CONFIG_MDIO_GPIO is not set +# CONFIG_MDIO_HISI_FEMAC is not set +# CONFIG_MDIO_OCTEON is not set +# CONFIG_MDIO_SUN4I is not set +# CONFIG_MDIO_THUNDER is not set +CONFIG_MDIO_XGENE=y + +# +# MII PHY device drivers +# +# CONFIG_AMD_PHY is not set +# CONFIG_AQUANTIA_PHY is not set +# CONFIG_AT803X_PHY is not set +# CONFIG_BCM7XXX_PHY is not set +# CONFIG_BCM87XX_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_DP83848_PHY is not set +# CONFIG_DP83867_PHY is not set +CONFIG_FIXED_PHY=y +# CONFIG_ICPLUS_PHY is not set +# CONFIG_INTEL_XWAY_PHY is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_MARVELL_PHY is not set +CONFIG_MICREL_PHY=y +# CONFIG_MICROCHIP_PHY is not set +# CONFIG_MICROSEMI_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_QSEMI_PHY is not set +CONFIG_REALTEK_PHY=m +# CONFIG_SMSC_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_TERANETICS_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_XILINX_GMII2RGMII is not set +# CONFIG_MICREL_KS8995MA is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +CONFIG_USB_NET_DRIVERS=y +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_RTL8152=m +# CONFIG_USB_LAN78XX is not set +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_AX88179_178A=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_CDC_EEM is not set +CONFIG_USB_NET_CDC_NCM=m +# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set +# CONFIG_USB_NET_CDC_MBIM is not set +CONFIG_USB_NET_DM9601=m +# CONFIG_USB_NET_SR9700 is not set +CONFIG_USB_NET_SR9800=m +CONFIG_USB_NET_SMSC75XX=m +CONFIG_USB_NET_SMSC95XX=m +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +# CONFIG_USB_NET_RNDIS_HOST is not set +CONFIG_USB_NET_CDC_SUBSET_ENABLE=m +CONFIG_USB_NET_CDC_SUBSET=m +# CONFIG_USB_ALI_M5632 is not set +# CONFIG_USB_AN2720 is not set +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +# CONFIG_USB_EPSON2888 is not set +# CONFIG_USB_KC2190 is not set +CONFIG_USB_NET_ZAURUS=m +# CONFIG_USB_NET_CX82310_ETH is not set +# CONFIG_USB_NET_KALMIA is not set +# CONFIG_USB_NET_QMI_WWAN is not set +# CONFIG_USB_HSO is not set +# CONFIG_USB_NET_INT51X1 is not set +# CONFIG_USB_IPHETH is not set +# CONFIG_USB_SIERRA_NET is not set +# CONFIG_USB_VL600 is not set +# CONFIG_USB_NET_CH9200 is not set +CONFIG_WLAN=y +CONFIG_WLAN_VENDOR_ADMTEK=y +# CONFIG_ADM8211 is not set +CONFIG_WLAN_VENDOR_ATH=y +# CONFIG_ATH_DEBUG is not set +# CONFIG_ATH5K is not set +# CONFIG_ATH5K_PCI is not set +# CONFIG_ATH9K is not set +# CONFIG_ATH9K_HTC is not set +# CONFIG_CARL9170 is not set +# CONFIG_ATH6KL is not set +# CONFIG_AR5523 is not set +# CONFIG_WIL6210 is not set +# CONFIG_ATH10K is not set +# CONFIG_WCN36XX is not set +CONFIG_WLAN_VENDOR_ATMEL=y +# CONFIG_ATMEL is not set +# CONFIG_AT76C50X_USB is not set +CONFIG_WLAN_VENDOR_BROADCOM=y +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_BRCMSMAC is not set +# CONFIG_BRCMFMAC is not set +CONFIG_WLAN_VENDOR_CISCO=y +CONFIG_WLAN_VENDOR_INTEL=y +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_IWL4965 is not set +# CONFIG_IWL3945 is not set +# CONFIG_IWLWIFI is not set +CONFIG_WLAN_VENDOR_INTERSIL=y +# CONFIG_HOSTAP is not set +# CONFIG_HERMES is not set +# CONFIG_P54_COMMON is not set +# CONFIG_PRISM54 is not set +CONFIG_WLAN_VENDOR_MARVELL=y +# CONFIG_LIBERTAS is not set +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_MWIFIEX is not set +# CONFIG_MWL8K is not set +CONFIG_WLAN_VENDOR_MEDIATEK=y +# CONFIG_MT7601U is not set +CONFIG_WLAN_VENDOR_RALINK=y +# CONFIG_RT2X00 is not set +CONFIG_WLAN_VENDOR_REALTEK=y +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +CONFIG_RTL_CARDS=m +# CONFIG_RTL8192CE is not set +# CONFIG_RTL8192SE is not set +# CONFIG_RTL8192DE is not set +# CONFIG_RTL8723AE is not set +# CONFIG_RTL8723BE is not set +# CONFIG_RTL8188EE is not set +# CONFIG_RTL8192EE is not set +# CONFIG_RTL8821AE is not set +# CONFIG_RTL8192CU is not set +# CONFIG_RTL8XXXU is not set +CONFIG_WLAN_VENDOR_RSI=y +# CONFIG_RSI_91X is not set +CONFIG_WLAN_VENDOR_ST=y +# CONFIG_CW1200 is not set +CONFIG_WLAN_VENDOR_TI=y +# CONFIG_WL1251 is not set +# CONFIG_WL12XX is not set +CONFIG_WL18XX=m +CONFIG_WLCORE=m +# CONFIG_WLCORE_SPI is not set +CONFIG_WLCORE_SDIO=m +CONFIG_WILINK_PLATFORM_DATA=y +CONFIG_WLAN_VENDOR_ZYDAS=y +# CONFIG_USB_ZD1201 is not set +# CONFIG_ZD1211RW is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +# CONFIG_WAN is not set +CONFIG_XEN_NETDEV_FRONTEND=y +# CONFIG_XEN_NETDEV_BACKEND is not set +# CONFIG_VMXNET3 is not set +# CONFIG_FUJITSU_ES is not set +# CONFIG_ISDN is not set +# CONFIG_NVM is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_LEDS=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set +# CONFIG_INPUT_MATRIXKMAP is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADC is not set +# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_ADP5589 is not set +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_QT1070 is not set +# CONFIG_KEYBOARD_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_GPIO_POLLED is not set +# CONFIG_KEYBOARD_TCA6416 is not set +# CONFIG_KEYBOARD_TCA8418 is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_LM8333 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_MCS is not set +# CONFIG_KEYBOARD_MPR121 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_TEGRA is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_SAMSUNG is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_SH_KEYSC is not set +# CONFIG_KEYBOARD_SUN4I_LRADC is not set +# CONFIG_KEYBOARD_OMAP4 is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_CROS_EC is not set +# CONFIG_KEYBOARD_CAP11XX is not set +# CONFIG_KEYBOARD_BCM is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_BYD=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_CYPRESS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +CONFIG_MOUSE_PS2_FOCALTECH=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_CYAPA is not set +# CONFIG_MOUSE_ELAN_I2C is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +# CONFIG_MOUSE_SYNAPTICS_USB is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_ATMEL_CAPTOUCH is not set +# CONFIG_INPUT_BMA150 is not set +# CONFIG_INPUT_E3X0_BUTTON is not set +CONFIG_INPUT_PM8941_PWRKEY=y +# CONFIG_INPUT_MMA8450 is not set +# CONFIG_INPUT_MPU3050 is not set +# CONFIG_INPUT_GP2A is not set +# CONFIG_INPUT_GPIO_BEEPER is not set +# CONFIG_INPUT_GPIO_TILT_POLLED is not set +# CONFIG_INPUT_GPIO_DECODER is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_KXTJ9 is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +# CONFIG_INPUT_REGULATOR_HAPTIC is not set +# CONFIG_INPUT_UINPUT is not set +# CONFIG_INPUT_PCF8574 is not set +# CONFIG_INPUT_PWM_BEEPER is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_IMS_PCU is not set +# CONFIG_INPUT_CMA3000 is not set +CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y +# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set +# CONFIG_INPUT_DRV260X_HAPTICS is not set +# CONFIG_INPUT_DRV2665_HAPTICS is not set +# CONFIG_INPUT_DRV2667_HAPTICS is not set +CONFIG_INPUT_HISI_POWERKEY=y +# CONFIG_RMI4_CORE is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_AMBAKMI=y +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set +# CONFIG_SERIO_PS2MULT is not set +# CONFIG_SERIO_ARC_PS2 is not set +# CONFIG_SERIO_APBPS2 is not set +# CONFIG_SERIO_SUN4I_PS2 is not set +# CONFIG_USERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_TTY=y +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_VT_CONSOLE_SLEEP=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=16 +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set +# CONFIG_N_GSM is not set +# CONFIG_TRACE_SINK is not set +CONFIG_DEVMEM=y +CONFIG_DEVKMEM=y + +# +# Serial drivers +# +CONFIG_SERIAL_EARLYCON=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y +CONFIG_SERIAL_8250_PNP=y +# CONFIG_SERIAL_8250_FINTEK is not set +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DMA=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_FSL=y +CONFIG_SERIAL_8250_DW=y +# CONFIG_SERIAL_8250_RT288X is not set +CONFIG_SERIAL_8250_MT6577=y +CONFIG_SERIAL_8250_UNIPHIER=y +# CONFIG_SERIAL_8250_MOXA is not set +CONFIG_SERIAL_OF_PLATFORM=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_AMBA_PL010 is not set +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set +CONFIG_SERIAL_MESON=y +CONFIG_SERIAL_MESON_CONSOLE=y +CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_UARTS_4=y +CONFIG_SERIAL_SAMSUNG_UARTS=4 +CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_SERIAL_TEGRA=y +# CONFIG_SERIAL_MAX3100 is not set +# CONFIG_SERIAL_MAX310X is not set +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=11 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +# CONFIG_SERIAL_SH_SCI_EARLYCON is not set +# CONFIG_SERIAL_SH_SCI_DMA is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_MSM=y +CONFIG_SERIAL_MSM_CONSOLE=y +# CONFIG_SERIAL_SCCNXP is not set +# CONFIG_SERIAL_SC16IS7XX is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set +# CONFIG_SERIAL_IFX6X60 is not set +CONFIG_SERIAL_XILINX_PS_UART=y +CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y +# CONFIG_SERIAL_ARC is not set +# CONFIG_SERIAL_RP2 is not set +# CONFIG_SERIAL_FSL_LPUART is not set +# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set +# CONFIG_SERIAL_SPRD is not set +CONFIG_SERIAL_MVEBU_UART=y +CONFIG_SERIAL_MVEBU_CONSOLE=y +CONFIG_SERIAL_MCTRL_GPIO=y +CONFIG_HVC_DRIVER=y +CONFIG_HVC_IRQ=y +CONFIG_HVC_XEN=y +CONFIG_HVC_XEN_FRONTEND=y +# CONFIG_HVC_DCC is not set +CONFIG_VIRTIO_CONSOLE=y +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=m +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +CONFIG_HW_RANDOM_IPROC_RNG200=m +# CONFIG_HW_RANDOM_VIRTIO is not set +CONFIG_HW_RANDOM_EXYNOS=m +CONFIG_HW_RANDOM_HISI=m +CONFIG_HW_RANDOM_MSM=m +CONFIG_HW_RANDOM_XGENE=m +CONFIG_HW_RANDOM_MESON=m +CONFIG_HW_RANDOM_CAVIUM=m +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# PCMCIA character devices +# +# CONFIG_RAW_DRIVER is not set +# CONFIG_HPET is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_XILLYBUS is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_ACPI_I2C_OPREGION=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MUX=y + +# +# Multiplexer I2C Chip support +# +# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set +# CONFIG_I2C_MUX_GPIO is not set +# CONFIG_I2C_MUX_PCA9541 is not set +CONFIG_I2C_MUX_PCA954x=y +# CONFIG_I2C_MUX_PINCTRL is not set +# CONFIG_I2C_MUX_REG is not set +# CONFIG_I2C_DEMUX_PINCTRL is not set +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_HIX5HD2 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# ACPI drivers +# +# CONFIG_I2C_SCMI is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_BCM_IPROC=y +# CONFIG_I2C_CADENCE is not set +# CONFIG_I2C_CBUS_GPIO is not set +CONFIG_I2C_DESIGNWARE_CORE=y +CONFIG_I2C_DESIGNWARE_PLATFORM=y +# CONFIG_I2C_DESIGNWARE_PCI is not set +# CONFIG_I2C_EMEV2 is not set +CONFIG_I2C_EXYNOS5=y +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_IMX=y +CONFIG_I2C_MESON=y +# CONFIG_I2C_MT65XX is not set +CONFIG_I2C_MV64XXX=y +# CONFIG_I2C_NOMADIK is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_PXA_PCI is not set +CONFIG_I2C_QUP=y +# CONFIG_I2C_RIIC is not set +# CONFIG_I2C_RK3X is not set +CONFIG_I2C_SH_MOBILE=y +# CONFIG_I2C_SIMTEC is not set +CONFIG_I2C_TEGRA=y +# CONFIG_I2C_UNIPHIER is not set +CONFIG_I2C_UNIPHIER_F=y +# CONFIG_I2C_VERSATILE is not set +# CONFIG_I2C_THUNDERX is not set +# CONFIG_I2C_XILINX is not set +# CONFIG_I2C_XLP9XX is not set +CONFIG_I2C_RCAR=y + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_DIOLAN_U2C is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_ROBOTFUZZ_OSIF is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +CONFIG_I2C_CROS_EC_TUNNEL=y +# CONFIG_I2C_XGENE_SLIMPRO is not set +# CONFIG_I2C_STUB is not set +CONFIG_I2C_SLAVE=y +# CONFIG_I2C_SLAVE_EEPROM is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_ALTERA is not set +# CONFIG_SPI_AXI_SPI_ENGINE is not set +CONFIG_SPI_BCM_QSPI=y +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_CADENCE is not set +# CONFIG_SPI_DESIGNWARE is not set +# CONFIG_SPI_GPIO is not set +# CONFIG_SPI_FSL_SPI is not set +# CONFIG_SPI_FSL_DSPI is not set +CONFIG_SPI_MESON_SPIFC=m +# CONFIG_SPI_MT65XX is not set +# CONFIG_SPI_OC_TINY is not set +CONFIG_SPI_ORION=y +CONFIG_SPI_PL022=y +# CONFIG_SPI_PXA2XX is not set +# CONFIG_SPI_PXA2XX_PCI is not set +# CONFIG_SPI_ROCKCHIP is not set +# CONFIG_SPI_RSPI is not set +CONFIG_SPI_QUP=y +CONFIG_SPI_S3C64XX=y +# CONFIG_SPI_SC18IS602 is not set +CONFIG_SPI_SH_MSIOF=y +# CONFIG_SPI_SH_MSIOF_TRANSFER_SYNC_DEBUG is not set +# CONFIG_SPI_SH_HSPI is not set +# CONFIG_SPI_SUN4I is not set +# CONFIG_SPI_SUN6I is not set +# CONFIG_SPI_TEGRA114 is not set +# CONFIG_SPI_TEGRA20_SFLASH is not set +# CONFIG_SPI_TEGRA20_SLINK is not set +# CONFIG_SPI_THUNDERX is not set +# CONFIG_SPI_XCOMM is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_XLP is not set +# CONFIG_SPI_ZYNQMP_GQSPI is not set + +# +# SPI Protocol Masters +# +CONFIG_SPI_SPIDEV=y +# CONFIG_SPI_LOOPBACK_TEST is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_SPMI=y +CONFIG_SPMI_MSM_PMIC_ARB=y +# CONFIG_HSI is not set + +# +# PPS support +# +CONFIG_PPS=y +# CONFIG_PPS_DEBUG is not set + +# +# PPS clients support +# +# CONFIG_PPS_CLIENT_KTIMER is not set +# CONFIG_PPS_CLIENT_LDISC is not set +# CONFIG_PPS_CLIENT_GPIO is not set + +# +# PPS generators support +# + +# +# PTP clock support +# +CONFIG_PTP_1588_CLOCK=y + +# +# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. +# +CONFIG_PINCTRL=y + +# +# Pin controllers +# +CONFIG_PINMUX=y +CONFIG_PINCONF=y +CONFIG_GENERIC_PINCONF=y +# CONFIG_DEBUG_PINCTRL is not set +# CONFIG_PINCTRL_AMD is not set +CONFIG_PINCTRL_MESON=y +CONFIG_PINCTRL_ROCKCHIP=y +CONFIG_PINCTRL_SINGLE=y +CONFIG_PINCTRL_MAX77620=y +CONFIG_PINCTRL_IPROC_GPIO=y +CONFIG_PINCTRL_NS2_MUX=y +# CONFIG_PINCTRL_BERLIN_BG2 is not set +# CONFIG_PINCTRL_BERLIN_BG2CD is not set +# CONFIG_PINCTRL_BERLIN_BG2Q is not set +# CONFIG_PINCTRL_BERLIN_BG4CT is not set +# CONFIG_PINCTRL_BAYTRAIL is not set +# CONFIG_PINCTRL_CHERRYVIEW is not set +# CONFIG_PINCTRL_BROXTON is not set +# CONFIG_PINCTRL_SUNRISEPOINT is not set +CONFIG_PINCTRL_MSM=y +# CONFIG_PINCTRL_APQ8064 is not set +# CONFIG_PINCTRL_APQ8084 is not set +# CONFIG_PINCTRL_IPQ4019 is not set +# CONFIG_PINCTRL_IPQ8064 is not set +# CONFIG_PINCTRL_MSM8660 is not set +# CONFIG_PINCTRL_MSM8960 is not set +# CONFIG_PINCTRL_MDM9615 is not set +# CONFIG_PINCTRL_MSM8X74 is not set +CONFIG_PINCTRL_MSM8916=y +CONFIG_PINCTRL_MSM8996=y +CONFIG_PINCTRL_QDF2XXX=y +CONFIG_PINCTRL_QCOM_SPMI_PMIC=y +# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set +CONFIG_PINCTRL_SAMSUNG=y +CONFIG_PINCTRL_EXYNOS=y +CONFIG_PINCTRL_SH_PFC=y +CONFIG_PINCTRL_PFC_R8A7795=y +CONFIG_PINCTRL_PFC_R8A7796=y +CONFIG_PINCTRL_SUNXI=y +# CONFIG_PINCTRL_SUN4I_A10 is not set +# CONFIG_PINCTRL_SUN5I_A10S is not set +# CONFIG_PINCTRL_SUN5I_A13 is not set +# CONFIG_PINCTRL_GR8 is not set +# CONFIG_PINCTRL_SUN6I_A31 is not set +# CONFIG_PINCTRL_SUN6I_A31S is not set +# CONFIG_PINCTRL_SUN6I_A31_R is not set +# CONFIG_PINCTRL_SUN7I_A20 is not set +# CONFIG_PINCTRL_SUN8I_A23 is not set +# CONFIG_PINCTRL_SUN8I_A33 is not set +# CONFIG_PINCTRL_SUN8I_A83T is not set +# CONFIG_PINCTRL_SUN8I_A23_R is not set +# CONFIG_PINCTRL_SUN8I_H3 is not set +# CONFIG_PINCTRL_SUN8I_H3_R is not set +# CONFIG_PINCTRL_SUN9I_A80 is not set +# CONFIG_PINCTRL_SUN9I_A80_R is not set +CONFIG_PINCTRL_SUN50I_A64=y +CONFIG_PINCTRL_TEGRA=y +CONFIG_PINCTRL_TEGRA124=y +CONFIG_PINCTRL_TEGRA210=y +CONFIG_PINCTRL_TEGRA_XUSB=y +CONFIG_PINCTRL_UNIPHIER=y +# CONFIG_PINCTRL_UNIPHIER_LD4 is not set +# CONFIG_PINCTRL_UNIPHIER_PRO4 is not set +# CONFIG_PINCTRL_UNIPHIER_SLD8 is not set +# CONFIG_PINCTRL_UNIPHIER_PRO5 is not set +# CONFIG_PINCTRL_UNIPHIER_PXS2 is not set +# CONFIG_PINCTRL_UNIPHIER_LD6B is not set +CONFIG_PINCTRL_UNIPHIER_LD11=y +CONFIG_PINCTRL_UNIPHIER_LD20=y +CONFIG_PINCTRL_MTK=y +# CONFIG_PINCTRL_MT2701 is not set +# CONFIG_PINCTRL_MT7623 is not set +# CONFIG_PINCTRL_MT8135 is not set +# CONFIG_PINCTRL_MT8127 is not set +CONFIG_PINCTRL_MT8173=y +# CONFIG_PINCTRL_MT6397 is not set +CONFIG_GPIOLIB=y +CONFIG_OF_GPIO=y +CONFIG_GPIO_ACPI=y +CONFIG_GPIOLIB_IRQCHIP=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_GENERIC=y + +# +# Memory mapped GPIO drivers +# +# CONFIG_GPIO_74XX_MMIO is not set +# CONFIG_GPIO_ALTERA is not set +# CONFIG_GPIO_AMDPT is not set +CONFIG_GPIO_DWAPB=y +CONFIG_GPIO_GENERIC_PLATFORM=y +# CONFIG_GPIO_GRGPIO is not set +# CONFIG_GPIO_MOCKUP is not set +# CONFIG_GPIO_MPC8XXX is not set +CONFIG_GPIO_PL061=y +CONFIG_GPIO_RCAR=y +# CONFIG_GPIO_SYSCON is not set +CONFIG_GPIO_TEGRA=y +# CONFIG_GPIO_VX855 is not set +CONFIG_GPIO_XGENE=y +# CONFIG_GPIO_XGENE_SB is not set +# CONFIG_GPIO_XILINX is not set +# CONFIG_GPIO_XLP is not set +# CONFIG_GPIO_ZYNQ is not set +# CONFIG_GPIO_ZX is not set + +# +# I2C GPIO expanders +# +# CONFIG_GPIO_ADP5588 is not set +# CONFIG_GPIO_ADNP is not set +# CONFIG_GPIO_MAX7300 is not set +# CONFIG_GPIO_MAX732X is not set +CONFIG_GPIO_PCA953X=y +CONFIG_GPIO_PCA953X_IRQ=y +# CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_SX150X is not set +# CONFIG_GPIO_TPIC2810 is not set +# CONFIG_GPIO_TS4900 is not set + +# +# MFD GPIO expanders +# +CONFIG_GPIO_MAX77620=y + +# +# PCI GPIO expanders +# +# CONFIG_GPIO_AMD8111 is not set +# CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_ML_IOH is not set +# CONFIG_GPIO_RDC321X is not set + +# +# SPI GPIO expanders +# +# CONFIG_GPIO_74X164 is not set +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MC33880 is not set +# CONFIG_GPIO_PISOSR is not set + +# +# SPI or I2C GPIO expanders +# +# CONFIG_GPIO_MCP23S08 is not set + +# +# USB GPIO expanders +# +# CONFIG_W1 is not set +CONFIG_POWER_AVS=y +# CONFIG_ROCKCHIP_IODOMAIN is not set +CONFIG_POWER_RESET=y +# CONFIG_POWER_RESET_GPIO is not set +# CONFIG_POWER_RESET_GPIO_RESTART is not set +# CONFIG_POWER_RESET_HISI is not set +CONFIG_POWER_RESET_MSM=y +# CONFIG_POWER_RESET_LTC2952 is not set +# CONFIG_POWER_RESET_RESTART is not set +CONFIG_POWER_RESET_VEXPRESS=y +CONFIG_POWER_RESET_XGENE=y +CONFIG_POWER_RESET_SYSCON=y +# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set +# CONFIG_POWER_RESET_ZX is not set +# CONFIG_SYSCON_REBOOT_MODE is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_GENERIC_ADC_BATTERY is not set +# CONFIG_TEST_POWER is not set +# CONFIG_BATTERY_DS2780 is not set +# CONFIG_BATTERY_DS2781 is not set +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_SBS is not set +CONFIG_BATTERY_BQ27XXX=y +CONFIG_BATTERY_BQ27XXX_I2C=y +# CONFIG_BATTERY_MAX17040 is not set +# CONFIG_BATTERY_MAX17042 is not set +# CONFIG_CHARGER_ISP1704 is not set +# CONFIG_CHARGER_MAX8903 is not set +# CONFIG_CHARGER_LP8727 is not set +# CONFIG_CHARGER_GPIO is not set +# CONFIG_CHARGER_MANAGER is not set +# CONFIG_CHARGER_QCOM_SMBB is not set +# CONFIG_CHARGER_BQ2415X is not set +# CONFIG_CHARGER_BQ24190 is not set +# CONFIG_CHARGER_BQ24257 is not set +# CONFIG_CHARGER_BQ24735 is not set +# CONFIG_CHARGER_BQ25890 is not set +# CONFIG_CHARGER_SMB347 is not set +# CONFIG_BATTERY_GAUGE_LTC2941 is not set +# CONFIG_CHARGER_RT9455 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_AD7314 is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7310 is not set +# CONFIG_SENSORS_ADT7410 is not set +# CONFIG_SENSORS_ADT7411 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set +CONFIG_SENSORS_ARM_SCPI=y +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS620 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_FTSTEUTATES is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_G762 is not set +# CONFIG_SENSORS_GPIO_FAN is not set +# CONFIG_SENSORS_HIH6130 is not set +# CONFIG_SENSORS_IIO_HWMON is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_JC42 is not set +# CONFIG_SENSORS_POWR1220 is not set +# CONFIG_SENSORS_LINEAGE is not set +# CONFIG_SENSORS_LTC2945 is not set +# CONFIG_SENSORS_LTC2990 is not set +# CONFIG_SENSORS_LTC4151 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4222 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LTC4260 is not set +# CONFIG_SENSORS_LTC4261 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX16065 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX1668 is not set +# CONFIG_SENSORS_MAX197 is not set +# CONFIG_SENSORS_MAX31722 is not set +# CONFIG_SENSORS_MAX6639 is not set +# CONFIG_SENSORS_MAX6642 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_MAX6697 is not set +# CONFIG_SENSORS_MAX31790 is not set +# CONFIG_SENSORS_MCP3021 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM73 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +CONFIG_SENSORS_LM90=m +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LM95234 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_LM95245 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_NTC_THERMISTOR is not set +# CONFIG_SENSORS_NCT6683 is not set +# CONFIG_SENSORS_NCT6775 is not set +# CONFIG_SENSORS_NCT7802 is not set +# CONFIG_SENSORS_NCT7904 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_PMBUS is not set +# CONFIG_SENSORS_PWM_FAN is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_SHT21 is not set +# CONFIG_SENSORS_SHT3x is not set +# CONFIG_SENSORS_SHTC1 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_EMC1403 is not set +# CONFIG_SENSORS_EMC2103 is not set +# CONFIG_SENSORS_EMC6W201 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SCH56XX_COMMON is not set +# CONFIG_SENSORS_SCH5627 is not set +# CONFIG_SENSORS_SCH5636 is not set +# CONFIG_SENSORS_SMM665 is not set +# CONFIG_SENSORS_ADC128D818 is not set +# CONFIG_SENSORS_ADS1015 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_ADS7871 is not set +# CONFIG_SENSORS_AMC6821 is not set +# CONFIG_SENSORS_INA209 is not set +CONFIG_SENSORS_INA2XX=m +# CONFIG_SENSORS_INA3221 is not set +# CONFIG_SENSORS_TC74 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP102 is not set +# CONFIG_SENSORS_TMP103 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set +# CONFIG_SENSORS_VEXPRESS is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83795 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set + +# +# ACPI drivers +# +# CONFIG_SENSORS_ACPI_POWER is not set +CONFIG_THERMAL=y +CONFIG_THERMAL_HWMON=y +CONFIG_THERMAL_OF=y +# CONFIG_THERMAL_WRITABLE_TRIPS is not set +# CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE is not set +# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set +# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set +CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR=y +# CONFIG_THERMAL_GOV_FAIR_SHARE is not set +# CONFIG_THERMAL_GOV_STEP_WISE is not set +# CONFIG_THERMAL_GOV_BANG_BANG is not set +# CONFIG_THERMAL_GOV_USER_SPACE is not set +CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y +CONFIG_CPU_THERMAL=y +# CONFIG_CLOCK_THERMAL is not set +# CONFIG_DEVFREQ_THERMAL is not set +CONFIG_THERMAL_EMULATION=y +# CONFIG_HISI_THERMAL is not set +# CONFIG_MAX77620_THERMAL is not set +# CONFIG_QORIQ_THERMAL is not set +# CONFIG_ROCKCHIP_THERMAL is not set +# CONFIG_RCAR_THERMAL is not set +CONFIG_RCAR_GEN3_THERMAL=y +# CONFIG_ARMADA_THERMAL is not set + +# +# ACPI INT340X thermal drivers +# +CONFIG_MTK_THERMAL=y + +# +# Samsung thermal drivers +# +CONFIG_EXYNOS_THERMAL=y + +# +# NVIDIA Tegra thermal drivers +# +# CONFIG_TEGRA_SOCTHERM is not set +# CONFIG_QCOM_SPMI_TEMP_ALARM is not set +# CONFIG_GENERIC_ADC_THERMAL is not set + +# +# Qualcomm thermal drivers +# +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_CORE=y +# CONFIG_WATCHDOG_NOWAYOUT is not set +# CONFIG_WATCHDOG_SYSFS is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_GPIO_WATCHDOG is not set +# CONFIG_WDAT_WDT is not set +# CONFIG_XILINX_WATCHDOG is not set +# CONFIG_ZIIRAVE_WATCHDOG is not set +# CONFIG_ARM_SP805_WATCHDOG is not set +# CONFIG_ARM_SBSA_WATCHDOG is not set +# CONFIG_CADENCE_WATCHDOG is not set +CONFIG_HAVE_S3C2410_WATCHDOG=y +CONFIG_S3C2410_WATCHDOG=y +# CONFIG_DW_WATCHDOG is not set +# CONFIG_SUNXI_WATCHDOG is not set +# CONFIG_MAX63XX_WATCHDOG is not set +# CONFIG_MAX77620_WATCHDOG is not set +# CONFIG_IMX2_WDT is not set +# CONFIG_TEGRA_WATCHDOG is not set +# CONFIG_QCOM_WDT is not set +CONFIG_MESON_GXBB_WATCHDOG=m +CONFIG_MESON_WATCHDOG=m +# CONFIG_MEDIATEK_WATCHDOG is not set +CONFIG_RENESAS_WDT=y +# CONFIG_ALIM7101_WDT is not set +# CONFIG_I6300ESB_WDT is not set +# CONFIG_MEN_A21_WDT is not set +# CONFIG_XEN_WDT is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Watchdog Pretimeout Governors +# +# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set +CONFIG_BCMA_POSSIBLE=y + +# +# Broadcom specific AMBA +# +# CONFIG_BCMA is not set + +# +# Multifunction device drivers +# +CONFIG_MFD_CORE=y +# CONFIG_MFD_ACT8945A is not set +# CONFIG_MFD_AS3711 is not set +# CONFIG_MFD_AS3722 is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_AAT2870_CORE is not set +# CONFIG_MFD_ATMEL_FLEXCOM is not set +# CONFIG_MFD_ATMEL_HLCDC is not set +# CONFIG_MFD_BCM590XX is not set +# CONFIG_MFD_AXP20X_I2C is not set +CONFIG_MFD_CROS_EC=y +CONFIG_MFD_CROS_EC_I2C=y +# CONFIG_MFD_CROS_EC_SPI is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_DA9052_SPI is not set +# CONFIG_MFD_DA9052_I2C is not set +# CONFIG_MFD_DA9055 is not set +# CONFIG_MFD_DA9062 is not set +# CONFIG_MFD_DA9063 is not set +# CONFIG_MFD_DA9150 is not set +# CONFIG_MFD_DLN2 is not set +# CONFIG_MFD_EXYNOS_LPASS is not set +# CONFIG_MFD_MC13XXX_SPI is not set +# CONFIG_MFD_MC13XXX_I2C is not set +# CONFIG_MFD_HI6421_PMIC is not set +CONFIG_MFD_HI655X_PMIC=y +# CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set +# CONFIG_LPC_ICH is not set +# CONFIG_LPC_SCH is not set +# CONFIG_INTEL_SOC_PMIC is not set +# CONFIG_MFD_JANZ_CMODIO is not set +# CONFIG_MFD_KEMPLD is not set +# CONFIG_MFD_88PM800 is not set +# CONFIG_MFD_88PM805 is not set +# CONFIG_MFD_88PM860X is not set +# CONFIG_MFD_MAX14577 is not set +CONFIG_MFD_MAX77620=y +# CONFIG_MFD_MAX77686 is not set +# CONFIG_MFD_MAX77693 is not set +# CONFIG_MFD_MAX77843 is not set +# CONFIG_MFD_MAX8907 is not set +# CONFIG_MFD_MAX8925 is not set +# CONFIG_MFD_MAX8997 is not set +# CONFIG_MFD_MAX8998 is not set +# CONFIG_MFD_MT6397 is not set +# CONFIG_MFD_MENF21BMC is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_MFD_VIPERBOARD is not set +# CONFIG_MFD_RETU is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_QCOM_RPM is not set +CONFIG_MFD_SPMI_PMIC=y +# CONFIG_MFD_RDC321X is not set +# CONFIG_MFD_RTSX_PCI is not set +# CONFIG_MFD_RT5033 is not set +# CONFIG_MFD_RTSX_USB is not set +# CONFIG_MFD_RC5T583 is not set +# CONFIG_MFD_RK808 is not set +# CONFIG_MFD_RN5T618 is not set +CONFIG_MFD_SEC_CORE=y +# CONFIG_MFD_SI476X_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SKY81452 is not set +# CONFIG_MFD_SMSC is not set +# CONFIG_ABX500_CORE is not set +# CONFIG_MFD_STMPE is not set +# CONFIG_MFD_SUN6I_PRCM is not set +CONFIG_MFD_SYSCON=y +# CONFIG_MFD_TI_AM335X_TSCADC is not set +# CONFIG_MFD_LP3943 is not set +# CONFIG_MFD_LP8788 is not set +# CONFIG_MFD_PALMAS is not set +# CONFIG_TPS6105X is not set +# CONFIG_TPS65010 is not set +# CONFIG_TPS6507X is not set +# CONFIG_MFD_TPS65086 is not set +# CONFIG_MFD_TPS65090 is not set +# CONFIG_MFD_TPS65217 is not set +# CONFIG_MFD_TI_LP873X is not set +# CONFIG_MFD_TPS65218 is not set +# CONFIG_MFD_TPS6586X is not set +# CONFIG_MFD_TPS65910 is not set +# CONFIG_MFD_TPS65912_I2C is not set +# CONFIG_MFD_TPS65912_SPI is not set +# CONFIG_MFD_TPS80031 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_TWL6040_CORE is not set +# CONFIG_MFD_WL1273_CORE is not set +# CONFIG_MFD_LM3533 is not set +# CONFIG_MFD_TC3589X is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_VX855 is not set +# CONFIG_MFD_ARIZONA_I2C is not set +# CONFIG_MFD_ARIZONA_SPI is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X_I2C is not set +# CONFIG_MFD_WM831X_SPI is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set +CONFIG_MFD_VEXPRESS_SYSREG=y +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +CONFIG_REGULATOR_FIXED_VOLTAGE=y +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_ACT8865 is not set +# CONFIG_REGULATOR_AD5398 is not set +# CONFIG_REGULATOR_ANATOP is not set +CONFIG_REGULATOR_BD9571MWV=y +# CONFIG_REGULATOR_DA9210 is not set +# CONFIG_REGULATOR_DA9211 is not set +# CONFIG_REGULATOR_FAN53555 is not set +CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_HI655X=y +# CONFIG_REGULATOR_ISL9305 is not set +# CONFIG_REGULATOR_ISL6271A is not set +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_LP3972 is not set +# CONFIG_REGULATOR_LP872X is not set +# CONFIG_REGULATOR_LP8755 is not set +# CONFIG_REGULATOR_LTC3589 is not set +# CONFIG_REGULATOR_LTC3676 is not set +# CONFIG_REGULATOR_MAX1586 is not set +CONFIG_REGULATOR_MAX77620=y +# CONFIG_REGULATOR_MAX8649 is not set +# CONFIG_REGULATOR_MAX8660 is not set +# CONFIG_REGULATOR_MAX8952 is not set +# CONFIG_REGULATOR_MAX8973 is not set +# CONFIG_REGULATOR_MT6311 is not set +# CONFIG_REGULATOR_PFUZE100 is not set +# CONFIG_REGULATOR_PV88060 is not set +# CONFIG_REGULATOR_PV88080 is not set +# CONFIG_REGULATOR_PV88090 is not set +CONFIG_REGULATOR_PWM=y +CONFIG_REGULATOR_QCOM_SMD_RPM=y +CONFIG_REGULATOR_QCOM_SPMI=y +# CONFIG_REGULATOR_S2MPA01 is not set +CONFIG_REGULATOR_S2MPS11=y +# CONFIG_REGULATOR_S5M8767 is not set +# CONFIG_REGULATOR_TPS51632 is not set +# CONFIG_REGULATOR_TPS62360 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set +# CONFIG_REGULATOR_TPS6524X is not set +# CONFIG_REGULATOR_VEXPRESS is not set +CONFIG_MEDIA_SUPPORT=y + +# +# Multimedia core support +# +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_ANALOG_TV_SUPPORT=y +CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y +# CONFIG_MEDIA_RADIO_SUPPORT is not set +# CONFIG_MEDIA_SDR_SUPPORT is not set +# CONFIG_MEDIA_RC_SUPPORT is not set +CONFIG_MEDIA_CONTROLLER=y +# CONFIG_MEDIA_CONTROLLER_DVB is not set +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_SUBDEV_API=y +CONFIG_VIDEO_V4L2=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +# CONFIG_VIDEO_PCI_SKELETON is not set +CONFIG_VIDEOBUF2_CORE=y +CONFIG_VIDEOBUF2_MEMOPS=y +CONFIG_VIDEOBUF2_DMA_CONTIG=y +CONFIG_VIDEOBUF2_VMALLOC=y +CONFIG_DVB_CORE=y +# CONFIG_DVB_NET is not set +# CONFIG_TTPCI_EEPROM is not set +CONFIG_DVB_MAX_ADAPTERS=8 +# CONFIG_DVB_DYNAMIC_MINORS is not set + +# +# Media drivers +# +# CONFIG_MEDIA_USB_SUPPORT is not set +# CONFIG_MEDIA_PCI_SUPPORT is not set +CONFIG_V4L_PLATFORM_DRIVERS=y +# CONFIG_VIDEO_CAFE_CCIC is not set +# CONFIG_VIDEO_SH_VOU is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS is not set +# CONFIG_VIDEO_XILINX is not set +CONFIG_VIDEO_RCAR_VIN=y +# CONFIG_VIDEO_RCAR_VIN_DEBUG is not set +CONFIG_VIDEO_RCAR_CSI2=y +CONFIG_V4L_MEM2MEM_DRIVERS=y +# CONFIG_VIDEO_MEDIATEK_VPU is not set +# CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set +# CONFIG_VIDEO_SAMSUNG_S5P_G2D is not set +# CONFIG_VIDEO_SAMSUNG_S5P_JPEG is not set +# CONFIG_VIDEO_SAMSUNG_S5P_MFC is not set +# CONFIG_VIDEO_SH_VEU is not set +# CONFIG_VIDEO_RENESAS_JPU is not set +CONFIG_VIDEO_RENESAS_FCP=y +CONFIG_VIDEO_RENESAS_VSP1=y +# CONFIG_VIDEO_RENESAS_DEBUG is not set +CONFIG_VIDEO_RENESAS_VSP_ALPHA_BIT_ARGB1555=0 +# CONFIG_V4L_TEST_DRIVERS is not set +# CONFIG_DVB_PLATFORM_DRIVERS is not set + +# +# Supported MMC/SDIO adapters +# +# CONFIG_SMS_SDIO_DRV is not set +# CONFIG_CYPRESS_FIRMWARE is not set + +# +# Media ancillary drivers (tuners, sensors, i2c, spi, frontends) +# +# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set +CONFIG_MEDIA_ATTACH=y + +# +# I2C Encoders, decoders, sensors and other helper chips +# + +# +# Audio decoders, processors and mixers +# +# CONFIG_VIDEO_TVAUDIO is not set +# CONFIG_VIDEO_TDA7432 is not set +# CONFIG_VIDEO_TDA9840 is not set +# CONFIG_VIDEO_TEA6415C is not set +# CONFIG_VIDEO_TEA6420 is not set +# CONFIG_VIDEO_MSP3400 is not set +# CONFIG_VIDEO_CS3308 is not set +# CONFIG_VIDEO_CS5345 is not set +# CONFIG_VIDEO_CS53L32A is not set +# CONFIG_VIDEO_TLV320AIC23B is not set +# CONFIG_VIDEO_UDA1342 is not set +# CONFIG_VIDEO_WM8775 is not set +# CONFIG_VIDEO_WM8739 is not set +# CONFIG_VIDEO_VP27SMPX is not set +# CONFIG_VIDEO_SONY_BTF_MPX is not set + +# +# RDS decoders +# +# CONFIG_VIDEO_SAA6588 is not set + +# +# Video decoders +# +# CONFIG_VIDEO_ADV7180 is not set +# CONFIG_VIDEO_ADV7183 is not set +CONFIG_VIDEO_ADV7482=y +# CONFIG_VIDEO_ADV7604 is not set +# CONFIG_VIDEO_ADV7842 is not set +# CONFIG_VIDEO_BT819 is not set +# CONFIG_VIDEO_BT856 is not set +# CONFIG_VIDEO_BT866 is not set +# CONFIG_VIDEO_KS0127 is not set +# CONFIG_VIDEO_ML86V7667 is not set +# CONFIG_VIDEO_AD5820 is not set +# CONFIG_VIDEO_SAA7110 is not set +# CONFIG_VIDEO_SAA711X is not set +# CONFIG_VIDEO_TC358743 is not set +# CONFIG_VIDEO_TVP514X is not set +# CONFIG_VIDEO_TVP5150 is not set +# CONFIG_VIDEO_TVP7002 is not set +# CONFIG_VIDEO_TW2804 is not set +# CONFIG_VIDEO_TW9903 is not set +# CONFIG_VIDEO_TW9906 is not set +# CONFIG_VIDEO_VPX3220 is not set + +# +# Video and audio decoders +# +# CONFIG_VIDEO_SAA717X is not set +# CONFIG_VIDEO_CX25840 is not set + +# +# Video encoders +# +# CONFIG_VIDEO_SAA7127 is not set +# CONFIG_VIDEO_SAA7185 is not set +# CONFIG_VIDEO_ADV7170 is not set +# CONFIG_VIDEO_ADV7175 is not set +# CONFIG_VIDEO_ADV7343 is not set +# CONFIG_VIDEO_ADV7393 is not set +# CONFIG_VIDEO_ADV7511 is not set +# CONFIG_VIDEO_AD9389B is not set +# CONFIG_VIDEO_AK881X is not set +# CONFIG_VIDEO_THS8200 is not set + +# +# Camera sensor devices +# +# CONFIG_VIDEO_OV2659 is not set +# CONFIG_VIDEO_OV7640 is not set +# CONFIG_VIDEO_OV7670 is not set +# CONFIG_VIDEO_OV9650 is not set +# CONFIG_VIDEO_VS6624 is not set +# CONFIG_VIDEO_MT9M032 is not set +# CONFIG_VIDEO_MT9M111 is not set +# CONFIG_VIDEO_MT9P031 is not set +# CONFIG_VIDEO_MT9T001 is not set +# CONFIG_VIDEO_MT9V011 is not set +# CONFIG_VIDEO_MT9V032 is not set +# CONFIG_VIDEO_SR030PC30 is not set +# CONFIG_VIDEO_NOON010PC30 is not set +# CONFIG_VIDEO_M5MOLS is not set +# CONFIG_VIDEO_S5K6AA is not set +# CONFIG_VIDEO_S5K6A3 is not set +# CONFIG_VIDEO_S5K4ECGX is not set +# CONFIG_VIDEO_S5K5BAF is not set +# CONFIG_VIDEO_SMIAPP is not set +# CONFIG_VIDEO_S5C73M3 is not set + +# +# Flash devices +# +# CONFIG_VIDEO_ADP1653 is not set +# CONFIG_VIDEO_AS3645A is not set +# CONFIG_VIDEO_LM3560 is not set +# CONFIG_VIDEO_LM3646 is not set + +# +# Video improvement chips +# +# CONFIG_VIDEO_UPD64031A is not set +# CONFIG_VIDEO_UPD64083 is not set + +# +# Audio/Video compression chips +# +# CONFIG_VIDEO_SAA6752HS is not set + +# +# Miscellaneous helper chips +# +# CONFIG_VIDEO_THS7303 is not set +# CONFIG_VIDEO_M52790 is not set + +# +# Sensors used on soc_camera driver +# + +# +# SPI helper chips +# +# CONFIG_VIDEO_GS1662 is not set +CONFIG_MEDIA_TUNER=y + +# +# Customize TV tuners +# +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA827X=m +CONFIG_MEDIA_TUNER_TDA18271=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MSI001=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_MT2060=m +CONFIG_MEDIA_TUNER_MT2063=m +CONFIG_MEDIA_TUNER_MT2266=m +CONFIG_MEDIA_TUNER_MT2131=m +CONFIG_MEDIA_TUNER_QT1010=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_XC4000=m +CONFIG_MEDIA_TUNER_MXL5005S=m +CONFIG_MEDIA_TUNER_MXL5007T=m +CONFIG_MEDIA_TUNER_MC44S803=m +CONFIG_MEDIA_TUNER_MAX2165=m +CONFIG_MEDIA_TUNER_TDA18218=m +CONFIG_MEDIA_TUNER_FC0011=m +CONFIG_MEDIA_TUNER_FC0012=m +CONFIG_MEDIA_TUNER_FC0013=m +CONFIG_MEDIA_TUNER_TDA18212=m +CONFIG_MEDIA_TUNER_E4000=m +CONFIG_MEDIA_TUNER_FC2580=m +CONFIG_MEDIA_TUNER_M88RS6000T=m +CONFIG_MEDIA_TUNER_TUA9001=m +CONFIG_MEDIA_TUNER_SI2157=m +CONFIG_MEDIA_TUNER_IT913X=m +CONFIG_MEDIA_TUNER_R820T=m +CONFIG_MEDIA_TUNER_MXL301RF=m +CONFIG_MEDIA_TUNER_QM1D1C0042=m + +# +# Customise DVB Frontends +# + +# +# Multistandard (satellite) frontends +# +CONFIG_DVB_STB0899=m +CONFIG_DVB_STB6100=m +CONFIG_DVB_STV090x=m +CONFIG_DVB_STV6110x=m +CONFIG_DVB_M88DS3103=m + +# +# Multistandard (cable + terrestrial) frontends +# +CONFIG_DVB_DRXK=m +CONFIG_DVB_TDA18271C2DD=m +CONFIG_DVB_SI2165=m +CONFIG_DVB_MN88472=m +CONFIG_DVB_MN88473=m + +# +# DVB-S (satellite) frontends +# +CONFIG_DVB_CX24110=m +CONFIG_DVB_CX24123=m +CONFIG_DVB_MT312=m +CONFIG_DVB_ZL10036=m +CONFIG_DVB_ZL10039=m +CONFIG_DVB_S5H1420=m +CONFIG_DVB_STV0288=m +CONFIG_DVB_STB6000=m +CONFIG_DVB_STV0299=m +CONFIG_DVB_STV6110=m +CONFIG_DVB_STV0900=m +CONFIG_DVB_TDA8083=m +CONFIG_DVB_TDA10086=m +CONFIG_DVB_TDA8261=m +CONFIG_DVB_VES1X93=m +CONFIG_DVB_TUNER_ITD1000=m +CONFIG_DVB_TUNER_CX24113=m +CONFIG_DVB_TDA826X=m +CONFIG_DVB_TUA6100=m +CONFIG_DVB_CX24116=m +CONFIG_DVB_CX24117=m +CONFIG_DVB_CX24120=m +CONFIG_DVB_SI21XX=m +CONFIG_DVB_TS2020=m +CONFIG_DVB_DS3000=m +CONFIG_DVB_MB86A16=m +CONFIG_DVB_TDA10071=m + +# +# DVB-T (terrestrial) frontends +# +CONFIG_DVB_SP8870=m +CONFIG_DVB_SP887X=m +CONFIG_DVB_CX22700=m +CONFIG_DVB_CX22702=m +CONFIG_DVB_S5H1432=m +CONFIG_DVB_DRXD=m +CONFIG_DVB_L64781=m +CONFIG_DVB_TDA1004X=m +CONFIG_DVB_NXT6000=m +CONFIG_DVB_MT352=m +CONFIG_DVB_ZL10353=m +CONFIG_DVB_DIB3000MB=m +CONFIG_DVB_DIB3000MC=m +CONFIG_DVB_DIB7000M=m +CONFIG_DVB_DIB7000P=m +CONFIG_DVB_DIB9000=m +CONFIG_DVB_TDA10048=m +CONFIG_DVB_AF9013=m +CONFIG_DVB_EC100=m +CONFIG_DVB_HD29L2=m +CONFIG_DVB_STV0367=m +CONFIG_DVB_CXD2820R=m +CONFIG_DVB_CXD2841ER=m +CONFIG_DVB_RTL2830=m +CONFIG_DVB_RTL2832=m +CONFIG_DVB_SI2168=m +# CONFIG_DVB_AS102_FE is not set +# CONFIG_DVB_GP8PSK_FE is not set + +# +# DVB-C (cable) frontends +# +CONFIG_DVB_VES1820=m +CONFIG_DVB_TDA10021=m +CONFIG_DVB_TDA10023=m +CONFIG_DVB_STV0297=m + +# +# ATSC (North American/Korean Terrestrial/Cable DTV) frontends +# +CONFIG_DVB_NXT200X=m +CONFIG_DVB_OR51211=m +CONFIG_DVB_OR51132=m +CONFIG_DVB_BCM3510=m +CONFIG_DVB_LGDT330X=m +CONFIG_DVB_LGDT3305=m +CONFIG_DVB_LGDT3306A=m +CONFIG_DVB_LG2160=m +CONFIG_DVB_S5H1409=m +CONFIG_DVB_AU8522=m +CONFIG_DVB_AU8522_DTV=m +CONFIG_DVB_AU8522_V4L=m +CONFIG_DVB_S5H1411=m + +# +# ISDB-T (terrestrial) frontends +# +CONFIG_DVB_S921=m +CONFIG_DVB_DIB8000=m +CONFIG_DVB_MB86A20S=m + +# +# ISDB-S (satellite) & ISDB-T (terrestrial) frontends +# +CONFIG_DVB_TC90522=m + +# +# Digital terrestrial only tuners/PLL +# +CONFIG_DVB_PLL=m +CONFIG_DVB_TUNER_DIB0070=m +CONFIG_DVB_TUNER_DIB0090=m + +# +# SEC control devices for DVB-S +# +CONFIG_DVB_DRX39XYJ=m +CONFIG_DVB_LNBH25=m +CONFIG_DVB_LNBP21=m +CONFIG_DVB_LNBP22=m +CONFIG_DVB_ISL6405=m +CONFIG_DVB_ISL6421=m +CONFIG_DVB_ISL6423=m +CONFIG_DVB_A8293=m +CONFIG_DVB_SP2=m +CONFIG_DVB_LGS8GL5=m +CONFIG_DVB_LGS8GXX=m +CONFIG_DVB_ATBM8830=m +CONFIG_DVB_TDA665x=m +CONFIG_DVB_IX2505V=m +CONFIG_DVB_M88RS2000=m +CONFIG_DVB_AF9033=m +CONFIG_DVB_HORUS3A=m +CONFIG_DVB_ASCOT2E=m +CONFIG_DVB_HELENE=m + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set + +# +# Graphics support +# +CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 +CONFIG_TEGRA_HOST1X=m +CONFIG_TEGRA_HOST1X_FIREWALL=y +CONFIG_DRM=y +CONFIG_DRM_MIPI_DSI=y +# CONFIG_DRM_DP_AUX_CHARDEV is not set +CONFIG_DRM_KMS_HELPER=y +CONFIG_DRM_KMS_FB_HELPER=y +CONFIG_DRM_FBDEV_EMULATION=y +# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set +CONFIG_DRM_TTM=m +CONFIG_DRM_GEM_CMA_HELPER=y +CONFIG_DRM_KMS_CMA_HELPER=y + +# +# I2C encoder or helper chips +# +CONFIG_DRM_I2C_CH7006=m +CONFIG_DRM_I2C_SIL164=m +# CONFIG_DRM_I2C_NXP_TDA998X is not set +# CONFIG_DRM_HDLCD is not set +# CONFIG_DRM_MALI_DISPLAY is not set +# CONFIG_DRM_RADEON is not set +# CONFIG_DRM_AMDGPU is not set + +# +# ACP (Audio CoProcessor) Configuration +# +CONFIG_DRM_NOUVEAU=m +CONFIG_NOUVEAU_PLATFORM_DRIVER=y +CONFIG_NOUVEAU_DEBUG=5 +CONFIG_NOUVEAU_DEBUG_DEFAULT=3 +CONFIG_DRM_NOUVEAU_BACKLIGHT=y +# CONFIG_DRM_VGEM is not set +# CONFIG_DRM_EXYNOS is not set +# CONFIG_DRM_UDL is not set +# CONFIG_DRM_AST is not set +# CONFIG_DRM_MGAG200 is not set +# CONFIG_DRM_CIRRUS_QEMU is not set +CONFIG_DRM_RCAR_DU=y +CONFIG_DRM_RCAR_HDMI=y +CONFIG_DRM_RCAR_LVDS=y +CONFIG_DRM_RCAR_VSP=y +# CONFIG_DRM_QXL is not set +# CONFIG_DRM_BOCHS is not set +# CONFIG_DRM_VIRTIO_GPU is not set +CONFIG_DRM_MSM=y +# CONFIG_DRM_MSM_REGISTER_LOGGING is not set +CONFIG_DRM_MSM_HDMI_HDCP=y +CONFIG_DRM_MSM_DSI=y +CONFIG_DRM_MSM_DSI_PLL=y +CONFIG_DRM_MSM_DSI_28NM_PHY=y +CONFIG_DRM_MSM_DSI_20NM_PHY=y +CONFIG_DRM_MSM_DSI_28NM_8960_PHY=y +CONFIG_DRM_TEGRA=m +# CONFIG_DRM_TEGRA_DEBUG is not set +CONFIG_DRM_PANEL=y + +# +# Display Panels +# +CONFIG_DRM_PANEL_SIMPLE=m +# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set +# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set +# CONFIG_DRM_PANEL_LG_LG4573 is not set +# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set +# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set +# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set +# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set +CONFIG_DRM_BRIDGE=y + +# +# Display Interface Bridges +# +# CONFIG_DRM_ANALOGIX_ANX78XX is not set +# CONFIG_DRM_DUMB_VGA_DAC is not set +CONFIG_DRM_DW_HDMI=y +# CONFIG_DRM_DW_HDMI_AHB_AUDIO is not set +# CONFIG_DRM_NXP_PTN3460 is not set +# CONFIG_DRM_PARADE_PS8622 is not set +# CONFIG_DRM_SII902X is not set +# CONFIG_DRM_TOSHIBA_TC358767 is not set +CONFIG_DRM_I2C_ADV7511=m +CONFIG_DRM_I2C_ADV7533=y +# CONFIG_DRM_ARCPGU is not set +CONFIG_DRM_HISI_KIRIN=m +CONFIG_HISI_KIRIN_DW_DSI=m +# CONFIG_DRM_MEDIATEK is not set +# CONFIG_DRM_LEGACY is not set + +# +# Frame buffer Devices +# +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +CONFIG_FB_CMDLINE=y +CONFIG_FB_NOTIFY=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +CONFIG_FB_SYS_FILLRECT=y +CONFIG_FB_SYS_COPYAREA=y +CONFIG_FB_SYS_IMAGEBLIT=y +# CONFIG_FB_FOREIGN_ENDIAN is not set +CONFIG_FB_SYS_FOPS=y +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +CONFIG_FB_BACKLIGHT=y +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +CONFIG_FB_ARMCLCD=y +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_EFI is not set +# CONFIG_FB_OPENCORES is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_I740 is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_SH_MOBILE_LCDC is not set +# CONFIG_FB_S3C is not set +# CONFIG_FB_SMSCUFX is not set +# CONFIG_FB_UDL is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_XEN_FBDEV_FRONTEND=y +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_FB_AUO_K190X is not set +# CONFIG_FB_SIMPLE is not set +# CONFIG_FB_SH_MOBILE_MERAM is not set +# CONFIG_FB_SSD1307 is not set +# CONFIG_FB_SM712 is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_L4F00242T03 is not set +# CONFIG_LCD_LMS283GF05 is not set +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI922X is not set +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +# CONFIG_LCD_PLATFORM is not set +# CONFIG_LCD_S6E63M0 is not set +# CONFIG_LCD_LD9040 is not set +# CONFIG_LCD_AMS369FG06 is not set +# CONFIG_LCD_LMS501KF03 is not set +# CONFIG_LCD_HX8357 is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=m +# CONFIG_BACKLIGHT_PWM is not set +# CONFIG_BACKLIGHT_PM8941_WLED is not set +# CONFIG_BACKLIGHT_ADP8860 is not set +# CONFIG_BACKLIGHT_ADP8870 is not set +# CONFIG_BACKLIGHT_LM3630A is not set +# CONFIG_BACKLIGHT_LM3639 is not set +CONFIG_BACKLIGHT_LP855X=m +# CONFIG_BACKLIGHT_GPIO is not set +# CONFIG_BACKLIGHT_LV5207LP is not set +# CONFIG_BACKLIGHT_BD6107 is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEOMODE_HELPERS=y +CONFIG_HDMI=y + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_DUMMY_CONSOLE_COLUMNS=80 +CONFIG_DUMMY_CONSOLE_ROWS=25 +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=y +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_PCM_ELD=y +CONFIG_SND_PCM_IEC958=y +CONFIG_SND_DMAENGINE_PCM=y +CONFIG_SND_JACK=y +CONFIG_SND_JACK_INPUT_DEV=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +CONFIG_SND_PCM_TIMER=y +# CONFIG_SND_HRTIMER is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_PROC_FS=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_ALOOP is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +CONFIG_SND_PCI=y +# CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_OXYGEN is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CTXFI is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set +# CONFIG_SND_INDIGOIOX is not set +# CONFIG_SND_INDIGODJX is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_HDSPM is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_LOLA is not set +# CONFIG_SND_LX6464ES is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_SE6X is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VIRTUOSO is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_YMFPCI is not set + +# +# HD-Audio +# +# CONFIG_SND_HDA_INTEL is not set +# CONFIG_SND_HDA_TEGRA is not set +CONFIG_SND_HDA_PREALLOC_SIZE=64 +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_UA101 is not set +# CONFIG_SND_USB_CAIAQ is not set +# CONFIG_SND_USB_6FIRE is not set +# CONFIG_SND_USB_HIFACE is not set +# CONFIG_SND_BCD2000 is not set +# CONFIG_SND_USB_POD is not set +# CONFIG_SND_USB_PODHD is not set +# CONFIG_SND_USB_TONEPORT is not set +# CONFIG_SND_USB_VARIAX is not set +CONFIG_SND_SOC=y +CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y +# CONFIG_SND_SOC_AMD_ACP is not set +# CONFIG_SND_ATMEL_SOC is not set +# CONFIG_SND_DESIGNWARE_I2S is not set + +# +# SoC Audio for Freescale CPUs +# + +# +# Common SoC Audio options for Freescale CPUs: +# +# CONFIG_SND_SOC_FSL_ASRC is not set +# CONFIG_SND_SOC_FSL_SAI is not set +# CONFIG_SND_SOC_FSL_SSI is not set +# CONFIG_SND_SOC_FSL_SPDIF is not set +# CONFIG_SND_SOC_FSL_ESAI is not set +# CONFIG_SND_SOC_IMX_AUDMUX is not set +# CONFIG_SND_KIRKWOOD_SOC is not set +# CONFIG_SND_SOC_IMG is not set +# CONFIG_SND_SOC_MT2701 is not set +# CONFIG_SND_SOC_MT8173 is not set +# CONFIG_SND_SOC_QCOM is not set +# CONFIG_SND_SOC_ROCKCHIP is not set +CONFIG_SND_SOC_SAMSUNG=y +# CONFIG_SND_SAMSUNG_PCM is not set +# CONFIG_SND_SAMSUNG_SPDIF is not set +# CONFIG_SND_SAMSUNG_I2S is not set +# CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994 is not set +# CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF is not set +# CONFIG_SND_SOC_SMDK_WM8994_PCM is not set +# CONFIG_SND_SOC_SNOW is not set +# CONFIG_SND_SOC_ARNDALE_RT5631_ALC5631 is not set + +# +# SoC Audio support for SuperH +# +# CONFIG_SND_SOC_SH4_FSI is not set +CONFIG_SND_SOC_RCAR=y + +# +# Allwinner SoC Audio support +# +# CONFIG_SND_SUN4I_CODEC is not set +# CONFIG_SND_SUN4I_I2S is not set +# CONFIG_SND_SUN4I_SPDIF is not set +# CONFIG_SND_SOC_TEGRA is not set +# CONFIG_SND_SOC_XTFPGA_I2S is not set +CONFIG_SND_SOC_I2C_AND_SPI=y + +# +# CODEC drivers +# +# CONFIG_SND_SOC_AC97_CODEC is not set +# CONFIG_SND_SOC_ADAU1701 is not set +# CONFIG_SND_SOC_ADAU7002 is not set +# CONFIG_SND_SOC_AK4104 is not set +# CONFIG_SND_SOC_AK4554 is not set +CONFIG_SND_SOC_AK4613=y +# CONFIG_SND_SOC_AK4642 is not set +# CONFIG_SND_SOC_AK5386 is not set +# CONFIG_SND_SOC_ALC5623 is not set +# CONFIG_SND_SOC_BT_SCO is not set +# CONFIG_SND_SOC_CS35L32 is not set +# CONFIG_SND_SOC_CS35L33 is not set +# CONFIG_SND_SOC_CS42L51_I2C is not set +# CONFIG_SND_SOC_CS42L52 is not set +# CONFIG_SND_SOC_CS42L56 is not set +# CONFIG_SND_SOC_CS42L73 is not set +# CONFIG_SND_SOC_CS4265 is not set +# CONFIG_SND_SOC_CS4270 is not set +# CONFIG_SND_SOC_CS4271_I2C is not set +# CONFIG_SND_SOC_CS4271_SPI is not set +# CONFIG_SND_SOC_CS42XX8_I2C is not set +# CONFIG_SND_SOC_CS4349 is not set +# CONFIG_SND_SOC_CS53L30 is not set +CONFIG_SND_SOC_HDMI_CODEC=y +# CONFIG_SND_SOC_ES8328 is not set +# CONFIG_SND_SOC_GTM601 is not set +# CONFIG_SND_SOC_INNO_RK3036 is not set +# CONFIG_SND_SOC_MAX98504 is not set +# CONFIG_SND_SOC_MAX9860 is not set +# CONFIG_SND_SOC_PCM1681 is not set +# CONFIG_SND_SOC_PCM179X_I2C is not set +# CONFIG_SND_SOC_PCM179X_SPI is not set +# CONFIG_SND_SOC_PCM3168A_I2C is not set +# CONFIG_SND_SOC_PCM3168A_SPI is not set +# CONFIG_SND_SOC_PCM512x_I2C is not set +# CONFIG_SND_SOC_PCM512x_SPI is not set +# CONFIG_SND_SOC_RT5616 is not set +# CONFIG_SND_SOC_RT5631 is not set +# CONFIG_SND_SOC_RT5677_SPI is not set +# CONFIG_SND_SOC_SGTL5000 is not set +# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set +# CONFIG_SND_SOC_SPDIF is not set +# CONFIG_SND_SOC_SSM2602_SPI is not set +# CONFIG_SND_SOC_SSM2602_I2C is not set +# CONFIG_SND_SOC_SSM4567 is not set +# CONFIG_SND_SOC_STA32X is not set +# CONFIG_SND_SOC_STA350 is not set +# CONFIG_SND_SOC_STI_SAS is not set +# CONFIG_SND_SOC_TAS2552 is not set +# CONFIG_SND_SOC_TAS5086 is not set +# CONFIG_SND_SOC_TAS571X is not set +# CONFIG_SND_SOC_TAS5720 is not set +# CONFIG_SND_SOC_TFA9879 is not set +# CONFIG_SND_SOC_TLV320AIC23_I2C is not set +# CONFIG_SND_SOC_TLV320AIC23_SPI is not set +# CONFIG_SND_SOC_TLV320AIC31XX is not set +# CONFIG_SND_SOC_TLV320AIC3X is not set +# CONFIG_SND_SOC_TS3A227E is not set +# CONFIG_SND_SOC_WM8510 is not set +# CONFIG_SND_SOC_WM8523 is not set +# CONFIG_SND_SOC_WM8580 is not set +# CONFIG_SND_SOC_WM8711 is not set +# CONFIG_SND_SOC_WM8728 is not set +# CONFIG_SND_SOC_WM8731 is not set +# CONFIG_SND_SOC_WM8737 is not set +# CONFIG_SND_SOC_WM8741 is not set +# CONFIG_SND_SOC_WM8750 is not set +# CONFIG_SND_SOC_WM8753 is not set +# CONFIG_SND_SOC_WM8770 is not set +# CONFIG_SND_SOC_WM8776 is not set +# CONFIG_SND_SOC_WM8804_I2C is not set +# CONFIG_SND_SOC_WM8804_SPI is not set +# CONFIG_SND_SOC_WM8903 is not set +# CONFIG_SND_SOC_WM8960 is not set +# CONFIG_SND_SOC_WM8962 is not set +# CONFIG_SND_SOC_WM8974 is not set +# CONFIG_SND_SOC_WM8978 is not set +# CONFIG_SND_SOC_WM8985 is not set +# CONFIG_SND_SOC_NAU8810 is not set +# CONFIG_SND_SOC_TPA6130A2 is not set +CONFIG_SND_SIMPLE_CARD_UTILS=y +CONFIG_SND_SIMPLE_CARD=y +# CONFIG_SND_SIMPLE_SCU_CARD is not set +# CONFIG_SOUND_PRIME is not set + +# +# HID support +# +CONFIG_HID=y +# CONFIG_HID_BATTERY_STRENGTH is not set +# CONFIG_HIDRAW is not set +# CONFIG_UHID is not set +CONFIG_HID_GENERIC=y + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=y +# CONFIG_HID_ACRUX is not set +CONFIG_HID_APPLE=y +# CONFIG_HID_APPLEIR is not set +# CONFIG_HID_AUREAL is not set +CONFIG_HID_BELKIN=y +# CONFIG_HID_BETOP_FF is not set +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +# CONFIG_HID_CORSAIR is not set +# CONFIG_HID_PRODIKEYS is not set +# CONFIG_HID_CMEDIA is not set +# CONFIG_HID_CP2112 is not set +CONFIG_HID_CYPRESS=y +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EMS_FF is not set +# CONFIG_HID_ELECOM is not set +# CONFIG_HID_ELO is not set +CONFIG_HID_EZKEY=y +# CONFIG_HID_GEMBIRD is not set +# CONFIG_HID_GFRM is not set +# CONFIG_HID_HOLTEK is not set +# CONFIG_HID_GT683R is not set +# CONFIG_HID_KEYTOUCH is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_UCLOGIC is not set +# CONFIG_HID_WALTOP is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_ICADE is not set +# CONFIG_HID_TWINHAN is not set +CONFIG_HID_KENSINGTON=y +# CONFIG_HID_LCPOWER is not set +# CONFIG_HID_LED is not set +# CONFIG_HID_LENOVO is not set +CONFIG_HID_LOGITECH=y +# CONFIG_HID_LOGITECH_HIDPP is not set +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGIG940_FF is not set +# CONFIG_LOGIWHEELS_FF is not set +# CONFIG_HID_MAGICMOUSE is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +# CONFIG_HID_MULTITOUCH is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PENMOUNT is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_PICOLCD is not set +# CONFIG_HID_PLANTRONICS is not set +# CONFIG_HID_PRIMAX is not set +# CONFIG_HID_ROCCAT is not set +# CONFIG_HID_SAITEK is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SPEEDLINK is not set +# CONFIG_HID_STEELSERIES is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_RMI is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TIVO is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THINGM is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_WACOM is not set +# CONFIG_HID_WIIMOTE is not set +# CONFIG_HID_XINMO is not set +# CONFIG_HID_ZEROPLUS is not set +# CONFIG_HID_ZYDACRON is not set +# CONFIG_HID_SENSOR_HUB is not set +# CONFIG_HID_ALPS is not set + +# +# USB HID support +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# I2C HID support +# +# CONFIG_I2C_HID is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_SUPPORT=y +CONFIG_USB_COMMON=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB=y +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEFAULT_PERSIST=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_OTG_FSM is not set +# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_PCI=y +CONFIG_USB_XHCI_PLATFORM=y +# CONFIG_USB_XHCI_MTK is not set +# CONFIG_USB_XHCI_MVEBU is not set +CONFIG_USB_XHCI_RCAR=y +CONFIG_USB_XHCI_TEGRA=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +CONFIG_USB_EHCI_PCI=y +CONFIG_USB_EHCI_MSM=y +# CONFIG_USB_EHCI_TEGRA is not set +CONFIG_USB_EHCI_EXYNOS=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_FOTG210_HCD is not set +# CONFIG_USB_MAX3421_HCD is not set +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PCI=y +CONFIG_USB_OHCI_EXYNOS=y +CONFIG_USB_OHCI_HCD_PLATFORM=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_RENESAS_USBHS_HCD is not set +# CONFIG_USB_HCD_TEST_MODE is not set +CONFIG_USB_RENESAS_USBHS=y + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_REALTEK is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_STORAGE_ENE_UB6250 is not set +# CONFIG_USB_UAS is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +# CONFIG_USBIP_CORE is not set +# CONFIG_USB_MUSB_HDRC is not set +CONFIG_USB_DWC3=y +# CONFIG_USB_DWC3_HOST is not set +# CONFIG_USB_DWC3_GADGET is not set +CONFIG_USB_DWC3_DUAL_ROLE=y + +# +# Platform Glue Driver Support +# +CONFIG_USB_DWC3_EXYNOS=y +CONFIG_USB_DWC3_PCI=y +CONFIG_USB_DWC3_OF_SIMPLE=y +CONFIG_USB_DWC2=y +# CONFIG_USB_DWC2_HOST is not set + +# +# Gadget/Dual-role mode requires USB Gadget support to be enabled +# +# CONFIG_USB_DWC2_PERIPHERAL is not set +CONFIG_USB_DWC2_DUAL_ROLE=y +# CONFIG_USB_DWC2_PCI is not set +# CONFIG_USB_DWC2_DEBUG is not set +# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_OF=y +CONFIG_USB_CHIPIDEA_UDC=y +CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_ISP1760=y +CONFIG_USB_ISP1760_HCD=y +CONFIG_USB_ISP1761_UDC=y +# CONFIG_USB_ISP1760_HOST_ROLE is not set +# CONFIG_USB_ISP1760_GADGET_ROLE is not set +CONFIG_USB_ISP1760_DUAL_ROLE=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_EHSET_TEST_FIXTURE is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_YUREX is not set +# CONFIG_USB_EZUSB_FX2 is not set +CONFIG_USB_HSIC_USB3503=y +# CONFIG_USB_HSIC_USB4604 is not set +# CONFIG_USB_LINK_LAYER_TEST is not set +# CONFIG_USB_CHAOSKEY is not set +# CONFIG_UCSI is not set + +# +# USB Physical Layer drivers +# +CONFIG_USB_PHY=y +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_USB_ISP1301 is not set +CONFIG_USB_MSM_OTG=y +# CONFIG_USB_QCOM_8X16_PHY is not set +CONFIG_USB_ULPI=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2 + +# +# USB Peripheral Controller +# +# CONFIG_USB_FOTG210_UDC is not set +# CONFIG_USB_GR_UDC is not set +# CONFIG_USB_R8A66597 is not set +CONFIG_USB_RENESAS_USBHS_UDC=y +CONFIG_USB_RENESAS_USB3=y +# CONFIG_USB_PXA27X is not set +# CONFIG_USB_MV_UDC is not set +# CONFIG_USB_MV_U3D is not set +# CONFIG_USB_M66592 is not set +# CONFIG_USB_BDC_UDC is not set +# CONFIG_USB_AMD5536UDC is not set +# CONFIG_USB_NET2272 is not set +# CONFIG_USB_NET2280 is not set +# CONFIG_USB_GOKU is not set +# CONFIG_USB_EG20T is not set +# CONFIG_USB_GADGET_XILINX is not set +# CONFIG_USB_DUMMY_HCD is not set +# CONFIG_USB_CONFIGFS is not set +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_G_NCM is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FUNCTIONFS is not set +# CONFIG_USB_MASS_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_ACM_MS is not set +# CONFIG_USB_G_MULTI is not set +# CONFIG_USB_G_HID is not set +# CONFIG_USB_G_DBGP is not set +# CONFIG_USB_G_WEBCAM is not set +# CONFIG_USB_LED_TRIG is not set +# CONFIG_USB_ULPI_BUS is not set +# CONFIG_UWB is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_PWRSEQ_EMMC=y +CONFIG_PWRSEQ_SIMPLE=y + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_MINORS=32 +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_ARMMMCI=y +CONFIG_MMC_QCOM_DML=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_IO_ACCESSORS=y +# CONFIG_MMC_SDHCI_PCI is not set +CONFIG_MMC_SDHCI_ACPI=y +CONFIG_MMC_SDHCI_PLTFM=y +# CONFIG_MMC_SDHCI_OF_ARASAN is not set +# CONFIG_MMC_SDHCI_OF_AT91 is not set +CONFIG_MMC_SDHCI_OF_ESDHC=y +CONFIG_MMC_SDHCI_TEGRA=y +# CONFIG_MMC_SDHCI_PXAV3 is not set +# CONFIG_MMC_SDHCI_F_SDH30 is not set +CONFIG_MMC_SDHCI_IPROC=y +CONFIG_MMC_SDHCI_MSM=y +# CONFIG_MMC_TIFM_SD is not set +CONFIG_MMC_SPI=y +CONFIG_MMC_TMIO_CORE=y +CONFIG_MMC_SDHI=y +# CONFIG_MMC_SDHI_PIO is not set +# CONFIG_MMC_SDHI_SEQ_WORKAROUND is not set +# CONFIG_MMC_CB710 is not set +# CONFIG_MMC_VIA_SDMMC is not set +CONFIG_MMC_DW=y +CONFIG_MMC_DW_PLTFM=y +CONFIG_MMC_DW_EXYNOS=y +CONFIG_MMC_DW_K3=y +# CONFIG_MMC_DW_PCI is not set +# CONFIG_MMC_DW_ROCKCHIP is not set +# CONFIG_MMC_SH_MMCIF is not set +# CONFIG_MMC_VUB300 is not set +# CONFIG_MMC_USHC is not set +# CONFIG_MMC_USDHI6ROL0 is not set +CONFIG_MMC_SUNXI=y +# CONFIG_MMC_TOSHIBA_PCI is not set +# CONFIG_MMC_MTK is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +# CONFIG_LEDS_CLASS_FLASH is not set + +# +# LED drivers +# +# CONFIG_LEDS_BCM6328 is not set +# CONFIG_LEDS_BCM6358 is not set +# CONFIG_LEDS_LM3530 is not set +# CONFIG_LEDS_LM3642 is not set +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_LP3952 is not set +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP5523 is not set +# CONFIG_LEDS_LP5562 is not set +# CONFIG_LEDS_LP8501 is not set +# CONFIG_LEDS_LP8860 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_PCA963X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_PWM is not set +# CONFIG_LEDS_REGULATOR is not set +# CONFIG_LEDS_BD2802 is not set +# CONFIG_LEDS_LT3593 is not set +# CONFIG_LEDS_TCA6507 is not set +# CONFIG_LEDS_TLC591XX is not set +# CONFIG_LEDS_LM355x is not set +# CONFIG_LEDS_IS31FL319X is not set +# CONFIG_LEDS_IS31FL32XX is not set + +# +# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) +# +# CONFIG_LEDS_BLINKM is not set +CONFIG_LEDS_SYSCON=y + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +# CONFIG_LEDS_TRIGGER_ONESHOT is not set +# CONFIG_LEDS_TRIGGER_DISK is not set +# CONFIG_LEDS_TRIGGER_MTD is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +CONFIG_LEDS_TRIGGER_CPU=y +# CONFIG_LEDS_TRIGGER_GPIO is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_LEDS_TRIGGER_TRANSIENT is not set +# CONFIG_LEDS_TRIGGER_CAMERA is not set +# CONFIG_LEDS_TRIGGER_PANIC is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_EDAC_SUPPORT=y +# CONFIG_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +CONFIG_RTC_SYSTOHC=y +CONFIG_RTC_SYSTOHC_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_ABB5ZES3 is not set +# CONFIG_RTC_DRV_ABX80X is not set +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_HYM8563 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +CONFIG_RTC_DRV_MAX77686=y +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_ISL12022 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8523 is not set +# CONFIG_RTC_DRV_PCF85063 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8010 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set +# CONFIG_RTC_DRV_EM3027 is not set +# CONFIG_RTC_DRV_RV8803 is not set +CONFIG_RTC_DRV_S5M=y + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T93 is not set +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1302 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1343 is not set +# CONFIG_RTC_DRV_DS1347 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6916 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RX4581 is not set +# CONFIG_RTC_DRV_RX6110 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_PCF2123 is not set +# CONFIG_RTC_DRV_MCP795 is not set +CONFIG_RTC_I2C_AND_SPI=y + +# +# SPI and I2C RTC drivers +# +CONFIG_RTC_DRV_DS3232=y +# CONFIG_RTC_DRV_PCF2127 is not set +# CONFIG_RTC_DRV_RV3029C2 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1685_FAMILY is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_DS2404 is not set +CONFIG_RTC_DRV_EFI=y +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set +# CONFIG_RTC_DRV_ZYNQMP is not set + +# +# on-CPU RTC drivers +# +CONFIG_HAVE_S3C_RTC=y +CONFIG_RTC_DRV_S3C=y +# CONFIG_RTC_DRV_PL030 is not set +CONFIG_RTC_DRV_PL031=y +CONFIG_RTC_DRV_SUN6I=y +# CONFIG_RTC_DRV_MV is not set +# CONFIG_RTC_DRV_ARMADA38X is not set +# CONFIG_RTC_DRV_PM8XXX is not set +CONFIG_RTC_DRV_TEGRA=y +# CONFIG_RTC_DRV_SNVS is not set +CONFIG_RTC_DRV_XGENE=y + +# +# HID Sensor RTC drivers +# +# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set +CONFIG_DMADEVICES=y +# CONFIG_DMADEVICES_DEBUG is not set + +# +# DMA Devices +# +CONFIG_DMA_ENGINE=y +CONFIG_DMA_VIRTUAL_CHANNELS=y +CONFIG_DMA_ACPI=y +CONFIG_DMA_OF=y +# CONFIG_AMBA_PL08X is not set +# CONFIG_FSL_EDMA is not set +# CONFIG_INTEL_IDMA64 is not set +# CONFIG_K3_DMA is not set +# CONFIG_MV_XOR is not set +# CONFIG_MV_XOR_V2 is not set +CONFIG_PL330_DMA=y +CONFIG_TEGRA20_APB_DMA=y +# CONFIG_TEGRA210_ADMA is not set +# CONFIG_XGENE_DMA is not set +# CONFIG_XILINX_DMA is not set +# CONFIG_XILINX_ZYNQMP_DMA is not set +# CONFIG_ZX_DMA is not set +CONFIG_QCOM_BAM_DMA=y +CONFIG_QCOM_HIDMA_MGMT=y +CONFIG_QCOM_HIDMA=y +# CONFIG_DW_DMAC is not set +# CONFIG_DW_DMAC_PCI is not set +CONFIG_RENESAS_DMA=y +CONFIG_SH_DMAE_BASE=y +# CONFIG_SH_DMAE is not set +CONFIG_RCAR_DMAC=y +CONFIG_RENESAS_USB_DMAC=y +# CONFIG_SUDMAC is not set + +# +# DMA Clients +# +# CONFIG_ASYNC_TX_DMA is not set +# CONFIG_DMATEST is not set + +# +# DMABUF options +# +CONFIG_SYNC_FILE=y +# CONFIG_SW_SYNC is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set +CONFIG_VFIO_IOMMU_TYPE1=y +CONFIG_VFIO_VIRQFD=y +CONFIG_VFIO=y +# CONFIG_VFIO_NOIOMMU is not set +CONFIG_VFIO_PCI=y +CONFIG_VFIO_PCI_MMAP=y +CONFIG_VFIO_PCI_INTX=y +# CONFIG_VFIO_PLATFORM is not set +CONFIG_IRQ_BYPASS_MANAGER=y +# CONFIG_VIRT_DRIVERS is not set +CONFIG_VIRTIO=y + +# +# Virtio drivers +# +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_PCI_LEGACY=y +CONFIG_VIRTIO_BALLOON=y +# CONFIG_VIRTIO_INPUT is not set +CONFIG_VIRTIO_MMIO=y +# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set + +# +# Microsoft Hyper-V guest support +# + +# +# Xen driver support +# +CONFIG_XEN_BALLOON=y +CONFIG_XEN_SCRUB_PAGES=y +CONFIG_XEN_DEV_EVTCHN=y +CONFIG_XEN_BACKEND=y +CONFIG_XENFS=y +CONFIG_XEN_COMPAT_XENFS=y +CONFIG_XEN_SYS_HYPERVISOR=y +CONFIG_XEN_XENBUS_FRONTEND=y +CONFIG_XEN_GNTDEV=y +CONFIG_XEN_GRANT_DEV_ALLOC=y +CONFIG_SWIOTLB_XEN=y +CONFIG_XEN_PRIVCMD=y +CONFIG_XEN_EFI=y +CONFIG_XEN_AUTO_XLATE=y +# CONFIG_STAGING is not set +# CONFIG_GOLDFISH is not set +CONFIG_CHROME_PLATFORMS=y +# CONFIG_CROS_EC_CHARDEV is not set +CONFIG_CROS_EC_PROTO=y +# CONFIG_CROS_KBD_LED_BACKLIGHT is not set +CONFIG_CLKDEV_LOOKUP=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_COMMON_CLK=y + +# +# Common Clock Framework +# +CONFIG_COMMON_CLK_VERSATILE=y +CONFIG_CLK_SP810=y +CONFIG_CLK_VEXPRESS_OSC=y +# CONFIG_COMMON_CLK_MAX77686 is not set +CONFIG_COMMON_CLK_SCPI=y +# CONFIG_COMMON_CLK_SI5351 is not set +# CONFIG_COMMON_CLK_SI514 is not set +# CONFIG_COMMON_CLK_SI570 is not set +# CONFIG_COMMON_CLK_CDCE706 is not set +# CONFIG_COMMON_CLK_CDCE925 is not set +CONFIG_COMMON_CLK_CS2000_CP=y +CONFIG_COMMON_CLK_S2MPS11=y +CONFIG_CLK_QORIQ=y +CONFIG_COMMON_CLK_XGENE=y +# CONFIG_COMMON_CLK_NXP is not set +# CONFIG_COMMON_CLK_PWM is not set +CONFIG_COMMON_CLK_5P49X=y +# CONFIG_COMMON_CLK_PXA is not set +# CONFIG_COMMON_CLK_PIC32 is not set +CONFIG_COMMON_CLK_IPROC=y +CONFIG_CLK_BCM_NS2=y +CONFIG_COMMON_CLK_HI3519=y +CONFIG_COMMON_CLK_HI6220=y +CONFIG_RESET_HISI=y +# CONFIG_STUB_CLK_HI6220 is not set +CONFIG_COMMON_CLK_MEDIATEK=y +CONFIG_COMMON_CLK_MT8135=y +CONFIG_COMMON_CLK_MT8173=y +CONFIG_COMMON_CLK_AMLOGIC=y +CONFIG_COMMON_CLK_GXBB=y +CONFIG_ARMADA_37XX_CLK=y +CONFIG_ARMADA_AP806_SYSCON=y +CONFIG_ARMADA_CP110_SYSCON=y +CONFIG_QCOM_GDSC=y +CONFIG_COMMON_CLK_QCOM=y +# CONFIG_APQ_GCC_8084 is not set +# CONFIG_APQ_MMCC_8084 is not set +# CONFIG_IPQ_GCC_4019 is not set +# CONFIG_IPQ_GCC_806X is not set +# CONFIG_IPQ_LCC_806X is not set +# CONFIG_MSM_GCC_8660 is not set +CONFIG_MSM_GCC_8916=y +# CONFIG_MSM_GCC_8960 is not set +# CONFIG_MSM_LCC_8960 is not set +# CONFIG_MDM_GCC_9615 is not set +# CONFIG_MDM_LCC_9615 is not set +# CONFIG_MSM_MMCC_8960 is not set +# CONFIG_MSM_GCC_8974 is not set +# CONFIG_MSM_MMCC_8974 is not set +CONFIG_MSM_GCC_8996=y +CONFIG_MSM_MMCC_8996=y +CONFIG_CLK_RENESAS_CPG_MSSR=y +CONFIG_COMMON_CLK_SAMSUNG=y +CONFIG_EXYNOS_ARM64_COMMON_CLK=y +CONFIG_EXYNOS_AUDSS_CLK_CON=y +CONFIG_SUNXI_CCU=y +# CONFIG_SUN6I_A31_CCU is not set +# CONFIG_SUN8I_A23_CCU is not set +# CONFIG_SUN8I_A33_CCU is not set +# CONFIG_SUN8I_H3_CCU is not set +CONFIG_CLK_UNIPHIER=y +CONFIG_HWSPINLOCK=y + +# +# Hardware Spinlock drivers +# +CONFIG_HWSPINLOCK_QCOM=y +CONFIG_HWSPINLOCK_RCAR=y + +# +# Clock Source drivers +# +CONFIG_CLKSRC_OF=y +CONFIG_CLKSRC_ACPI=y +CONFIG_CLKSRC_PROBE=y +CONFIG_CLKSRC_MMIO=y +CONFIG_ROCKCHIP_TIMER=y +CONFIG_ARM_ARCH_TIMER=y +CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y +CONFIG_FSL_ERRATUM_A008585=y +CONFIG_ARM_TIMER_SP804=y +# CONFIG_ATMEL_PIT is not set +CONFIG_MTK_TIMER=y +# CONFIG_SH_TIMER_CMT is not set +# CONFIG_SH_TIMER_MTU2 is not set +# CONFIG_SH_TIMER_TMU is not set +# CONFIG_EM_TIMER_STI is not set +CONFIG_CLKSRC_VERSATILE=y +CONFIG_MAILBOX=y +CONFIG_ARM_MHU=y +# CONFIG_PLATFORM_MHU is not set +# CONFIG_PL320_MBOX is not set +# CONFIG_ROCKCHIP_MBOX is not set +# CONFIG_PCC is not set +# CONFIG_ALTERA_MBOX is not set +CONFIG_HI6220_MBOX=y +# CONFIG_MAILBOX_TEST is not set +# CONFIG_XGENE_SLIMPRO_MBOX is not set +CONFIG_BCM_PDC_MBOX=y +CONFIG_IOMMU_API=y +CONFIG_IOMMU_SUPPORT=y + +# +# Generic IOMMU Pagetable Support +# +CONFIG_IOMMU_IO_PGTABLE=y +CONFIG_IOMMU_IO_PGTABLE_LPAE=y +# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set +# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set +CONFIG_IOMMU_IOVA=y +CONFIG_OF_IOMMU=y +CONFIG_IOMMU_DMA=y +# CONFIG_EXYNOS_IOMMU is not set +# CONFIG_IPMMU_VMSA is not set +CONFIG_ARM_SMMU=y +# CONFIG_ARM_SMMU_V3 is not set +# CONFIG_MTK_IOMMU is not set + +# +# Remoteproc drivers +# +# CONFIG_STE_MODEM_RPROC is not set +# CONFIG_QCOM_Q6V5_PIL is not set +# CONFIG_QCOM_WCNSS_PIL is not set + +# +# Rpmsg drivers +# +CONFIG_RPMSG=y +CONFIG_RPMSG_VIRTIO=y + +# +# SOC (System On Chip) specific Drivers +# + +# +# Broadcom SoC drivers +# +CONFIG_MTK_INFRACFG=y +# CONFIG_MTK_PMIC_WRAP is not set +CONFIG_MTK_SCPSYS=y +# CONFIG_QCOM_GSBI is not set +CONFIG_QCOM_SMEM=y +CONFIG_QCOM_SMD=y +CONFIG_QCOM_SMD_RPM=y +# CONFIG_QCOM_SMP2P is not set +# CONFIG_QCOM_SMSM is not set +# CONFIG_QCOM_WCNSS_CTRL is not set +# CONFIG_ROCKCHIP_PM_DOMAINS is not set +CONFIG_SOC_SAMSUNG=y +CONFIG_SUNXI_SRAM=y +CONFIG_ARCH_TEGRA_132_SOC=y +CONFIG_ARCH_TEGRA_210_SOC=y +# CONFIG_SOC_TI is not set +CONFIG_RCAR_THERMAL_EMS_ENABLED=y +CONFIG_RCAR_DDR_BACKUP=y +CONFIG_PM_DEVFREQ=y + +# +# DEVFREQ Governors +# +CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y +CONFIG_DEVFREQ_GOV_PERFORMANCE=y +CONFIG_DEVFREQ_GOV_POWERSAVE=y +CONFIG_DEVFREQ_GOV_USERSPACE=y +CONFIG_DEVFREQ_GOV_PASSIVE=y + +# +# DEVFREQ Drivers +# +# CONFIG_ARM_EXYNOS_BUS_DEVFREQ is not set +# CONFIG_ARM_RK3399_DMC_DEVFREQ is not set +# CONFIG_PM_DEVFREQ_EVENT is not set +CONFIG_EXTCON=y + +# +# Extcon Device Drivers +# +# CONFIG_EXTCON_ADC_JACK is not set +# CONFIG_EXTCON_GPIO is not set +# CONFIG_EXTCON_MAX3355 is not set +# CONFIG_EXTCON_QCOM_SPMI_MISC is not set +# CONFIG_EXTCON_RT8973A is not set +# CONFIG_EXTCON_SM5502 is not set +CONFIG_EXTCON_USB_GPIO=y +# CONFIG_MEMORY is not set +CONFIG_IIO=y +# CONFIG_IIO_BUFFER is not set +# CONFIG_IIO_CONFIGFS is not set +# CONFIG_IIO_TRIGGER is not set +# CONFIG_IIO_SW_DEVICE is not set +# CONFIG_IIO_SW_TRIGGER is not set + +# +# Accelerometers +# +# CONFIG_BMA180 is not set +# CONFIG_BMA220 is not set +# CONFIG_BMC150_ACCEL is not set +# CONFIG_DMARD06 is not set +# CONFIG_DMARD09 is not set +# CONFIG_IIO_ST_ACCEL_3AXIS is not set +# CONFIG_KXSD9 is not set +# CONFIG_KXCJK1013 is not set +# CONFIG_MC3230 is not set +# CONFIG_MMA7455_I2C is not set +# CONFIG_MMA7455_SPI is not set +# CONFIG_MMA7660 is not set +# CONFIG_MMA8452 is not set +# CONFIG_MMA9551 is not set +# CONFIG_MMA9553 is not set +# CONFIG_MXC4005 is not set +# CONFIG_MXC6255 is not set +# CONFIG_STK8312 is not set +# CONFIG_STK8BA50 is not set + +# +# Analog to digital converters +# +# CONFIG_AD7266 is not set +# CONFIG_AD7291 is not set +# CONFIG_AD7298 is not set +# CONFIG_AD7476 is not set +# CONFIG_AD7791 is not set +# CONFIG_AD7793 is not set +# CONFIG_AD7887 is not set +# CONFIG_AD7923 is not set +# CONFIG_AD799X is not set +# CONFIG_BCM_IPROC_ADC is not set +# CONFIG_BERLIN2_ADC is not set +# CONFIG_CC10001_ADC is not set +CONFIG_EXYNOS_ADC=y +# CONFIG_HI8435 is not set +# CONFIG_INA2XX_ADC is not set +# CONFIG_LTC2485 is not set +# CONFIG_MAX1027 is not set +# CONFIG_MAX1363 is not set +# CONFIG_MCP320X is not set +# CONFIG_MCP3422 is not set +# CONFIG_MEDIATEK_MT6577_AUXADC is not set +# CONFIG_NAU7802 is not set +# CONFIG_QCOM_SPMI_IADC is not set +# CONFIG_QCOM_SPMI_VADC is not set +# CONFIG_ROCKCHIP_SARADC is not set +# CONFIG_TI_ADC081C is not set +# CONFIG_TI_ADC0832 is not set +# CONFIG_TI_ADC12138 is not set +# CONFIG_TI_ADC128S052 is not set +# CONFIG_TI_ADC161S626 is not set +# CONFIG_TI_ADS1015 is not set +# CONFIG_TI_ADS8688 is not set +# CONFIG_VF610_ADC is not set + +# +# Amplifiers +# +# CONFIG_AD8366 is not set + +# +# Chemical Sensors +# +# CONFIG_ATLAS_PH_SENSOR is not set +# CONFIG_IAQCORE is not set +# CONFIG_VZ89X is not set + +# +# Hid Sensor IIO Common +# + +# +# SSP Sensor Common +# +# CONFIG_IIO_SSP_SENSORHUB is not set + +# +# Digital to analog converters +# +# CONFIG_AD5064 is not set +# CONFIG_AD5360 is not set +# CONFIG_AD5380 is not set +# CONFIG_AD5421 is not set +# CONFIG_AD5446 is not set +# CONFIG_AD5449 is not set +# CONFIG_AD5592R is not set +# CONFIG_AD5593R is not set +# CONFIG_AD5504 is not set +# CONFIG_AD5624R_SPI is not set +# CONFIG_AD5686 is not set +# CONFIG_AD5755 is not set +# CONFIG_AD5761 is not set +# CONFIG_AD5764 is not set +# CONFIG_AD5791 is not set +# CONFIG_AD7303 is not set +# CONFIG_AD8801 is not set +# CONFIG_M62332 is not set +# CONFIG_MAX517 is not set +# CONFIG_MAX5821 is not set +# CONFIG_MCP4725 is not set +# CONFIG_MCP4922 is not set +# CONFIG_VF610_DAC is not set + +# +# IIO dummy driver +# + +# +# Frequency Synthesizers DDS/PLL +# + +# +# Clock Generator/Distribution +# +# CONFIG_AD9523 is not set + +# +# Phase-Locked Loop (PLL) frequency synthesizers +# +# CONFIG_ADF4350 is not set + +# +# Digital gyroscope sensors +# +# CONFIG_ADIS16080 is not set +# CONFIG_ADIS16130 is not set +# CONFIG_ADIS16136 is not set +# CONFIG_ADIS16260 is not set +# CONFIG_ADXRS450 is not set +# CONFIG_BMG160 is not set +# CONFIG_IIO_ST_GYRO_3AXIS is not set +# CONFIG_ITG3200 is not set + +# +# Health Sensors +# + +# +# Heart Rate Monitors +# +# CONFIG_AFE4403 is not set +# CONFIG_AFE4404 is not set +# CONFIG_MAX30100 is not set + +# +# Humidity sensors +# +# CONFIG_AM2315 is not set +# CONFIG_DHT11 is not set +# CONFIG_HDC100X is not set +# CONFIG_HTU21 is not set +# CONFIG_SI7005 is not set +# CONFIG_SI7020 is not set + +# +# Inertial measurement units +# +# CONFIG_ADIS16400 is not set +# CONFIG_ADIS16480 is not set +# CONFIG_BMI160_I2C is not set +# CONFIG_BMI160_SPI is not set +# CONFIG_KMX61 is not set +# CONFIG_INV_MPU6050_I2C is not set +# CONFIG_INV_MPU6050_SPI is not set + +# +# Light sensors +# +# CONFIG_ACPI_ALS is not set +# CONFIG_ADJD_S311 is not set +# CONFIG_AL3320A is not set +# CONFIG_APDS9300 is not set +# CONFIG_APDS9960 is not set +# CONFIG_BH1750 is not set +# CONFIG_BH1780 is not set +# CONFIG_CM32181 is not set +# CONFIG_CM3232 is not set +# CONFIG_CM3323 is not set +# CONFIG_CM36651 is not set +# CONFIG_GP2AP020A00F is not set +# CONFIG_ISL29125 is not set +# CONFIG_JSA1212 is not set +# CONFIG_RPR0521 is not set +# CONFIG_LTR501 is not set +# CONFIG_MAX44000 is not set +# CONFIG_OPT3001 is not set +# CONFIG_PA12203001 is not set +# CONFIG_SI1145 is not set +# CONFIG_STK3310 is not set +# CONFIG_TCS3414 is not set +# CONFIG_TCS3472 is not set +# CONFIG_SENSORS_TSL2563 is not set +# CONFIG_TSL4531 is not set +# CONFIG_US5182D is not set +# CONFIG_VCNL4000 is not set +# CONFIG_VEML6070 is not set + +# +# Magnetometer sensors +# +# CONFIG_AK8974 is not set +# CONFIG_AK8975 is not set +# CONFIG_AK09911 is not set +# CONFIG_BMC150_MAGN_I2C is not set +# CONFIG_BMC150_MAGN_SPI is not set +# CONFIG_MAG3110 is not set +# CONFIG_MMC35240 is not set +# CONFIG_IIO_ST_MAGN_3AXIS is not set +# CONFIG_SENSORS_HMC5843_I2C is not set +# CONFIG_SENSORS_HMC5843_SPI is not set + +# +# Inclinometer sensors +# + +# +# Digital potentiometers +# +# CONFIG_DS1803 is not set +# CONFIG_MAX5487 is not set +# CONFIG_MCP4131 is not set +# CONFIG_MCP4531 is not set +# CONFIG_TPL0102 is not set + +# +# Pressure sensors +# +# CONFIG_BMP280 is not set +# CONFIG_HP03 is not set +# CONFIG_MPL115_I2C is not set +# CONFIG_MPL115_SPI is not set +# CONFIG_MPL3115 is not set +# CONFIG_MS5611 is not set +# CONFIG_MS5637 is not set +# CONFIG_IIO_ST_PRESS is not set +# CONFIG_T5403 is not set +# CONFIG_HP206C is not set +# CONFIG_ZPA2326 is not set + +# +# Lightning sensors +# +# CONFIG_AS3935 is not set + +# +# Proximity sensors +# +# CONFIG_LIDAR_LITE_V2 is not set +# CONFIG_SX9500 is not set + +# +# Temperature sensors +# +# CONFIG_MAXIM_THERMOCOUPLE is not set +# CONFIG_MLX90614 is not set +# CONFIG_TMP006 is not set +# CONFIG_TSYS01 is not set +# CONFIG_TSYS02D is not set +# CONFIG_NTB is not set +# CONFIG_VME_BUS is not set +CONFIG_PWM=y +CONFIG_PWM_SYSFS=y +# CONFIG_PWM_BCM_IPROC is not set +# CONFIG_PWM_BERLIN is not set +# CONFIG_PWM_CROS_EC is not set +# CONFIG_PWM_FSL_FTM is not set +# CONFIG_PWM_MESON is not set +# CONFIG_PWM_MTK_DISP is not set +# CONFIG_PWM_PCA9685 is not set +CONFIG_PWM_RCAR=y +# CONFIG_PWM_RENESAS_TPU is not set +# CONFIG_PWM_ROCKCHIP is not set +CONFIG_PWM_SAMSUNG=y +# CONFIG_PWM_SUN4I is not set +CONFIG_PWM_TEGRA=m +CONFIG_IRQCHIP=y +CONFIG_ARM_GIC=y +CONFIG_ARM_GIC_MAX_NR=1 +CONFIG_ARM_GIC_V2M=y +CONFIG_ARM_GIC_V3=y +CONFIG_ARM_GIC_V3_ITS=y +CONFIG_ALPINE_MSI=y +CONFIG_DW_APB_ICTL=y +CONFIG_HISILICON_IRQ_MBIGEN=y +CONFIG_RENESAS_IRQC=y +CONFIG_MVEBU_ODMI=y +CONFIG_MVEBU_PIC=y +CONFIG_LS_SCFG_MSI=y +CONFIG_PARTITION_PERCPU=y +# CONFIG_IPACK_BUS is not set +CONFIG_ARCH_HAS_RESET_CONTROLLER=y +CONFIG_RESET_CONTROLLER=y +# CONFIG_RESET_ATH79 is not set +CONFIG_RESET_BERLIN=y +# CONFIG_RESET_LPC18XX is not set +CONFIG_RESET_MESON=y +# CONFIG_RESET_PISTACHIO is not set +# CONFIG_RESET_SOCFPGA is not set +# CONFIG_RESET_STM32 is not set +CONFIG_RESET_SUNXI=y +# CONFIG_TI_SYSCON_RESET is not set +CONFIG_RESET_UNIPHIER=y +# CONFIG_RESET_ZYNQ is not set +CONFIG_COMMON_RESET_HI6220=y +# CONFIG_FMC is not set + +# +# PHY Subsystem +# +CONFIG_GENERIC_PHY=y +# CONFIG_PHY_BCM_NS_USB2 is not set +# CONFIG_PHY_BCM_NS_USB3 is not set +# CONFIG_PHY_BERLIN_USB is not set +# CONFIG_PHY_BERLIN_SATA is not set +CONFIG_PHY_EXYNOS_MIPI_VIDEO=y +# CONFIG_PHY_PXA_28NM_HSIC is not set +# CONFIG_PHY_PXA_28NM_USB2 is not set +# CONFIG_PHY_RCAR_GEN2 is not set +CONFIG_PHY_RCAR_GEN3_USB2=y +# CONFIG_PHY_RCAR_GEN3_USB2_CLKSEL is not set +# CONFIG_PHY_RCAR_GEN3_USB3 is not set +CONFIG_PHY_EXYNOS_DP_VIDEO=y +# CONFIG_BCM_KONA_USB2_PHY is not set +# CONFIG_PHY_MT65XX_USB3 is not set +CONFIG_PHY_HI6220_USB=y +# CONFIG_PHY_SUN4I_USB is not set +# CONFIG_PHY_SUN9I_USB is not set +CONFIG_PHY_SAMSUNG_USB2=y +# CONFIG_PHY_EXYNOS4210_USB2 is not set +# CONFIG_PHY_EXYNOS4X12_USB2 is not set +# CONFIG_PHY_EXYNOS5250_USB2 is not set +CONFIG_PHY_EXYNOS5_USBDRD=y +# CONFIG_PHY_QCOM_APQ8064_SATA is not set +# CONFIG_PHY_QCOM_IPQ806X_SATA is not set +# CONFIG_PHY_ROCKCHIP_USB is not set +# CONFIG_PHY_ROCKCHIP_INNO_USB2 is not set +# CONFIG_PHY_ROCKCHIP_EMMC is not set +# CONFIG_PHY_ROCKCHIP_DP is not set +# CONFIG_PHY_ROCKCHIP_PCIE is not set +# CONFIG_PHY_ROCKCHIP_TYPEC is not set +CONFIG_PHY_XGENE=y +# CONFIG_PHY_QCOM_UFS is not set +CONFIG_PHY_BRCM_SATA=y +CONFIG_PHY_TEGRA_XUSB=y +CONFIG_PHY_NS2_PCIE=y +# CONFIG_POWERCAP is not set +# CONFIG_MCB is not set + +# +# Performance monitor support +# +CONFIG_ARM_PMU=y +# CONFIG_XGENE_PMU is not set +CONFIG_RAS=y +# CONFIG_THUNDERBOLT is not set + +# +# Android +# +# CONFIG_ANDROID is not set +# CONFIG_LIBNVDIMM is not set +# CONFIG_DEV_DAX is not set +# CONFIG_NVMEM is not set +# CONFIG_STM is not set +# CONFIG_INTEL_TH is not set + +# +# FPGA Configuration Support +# +# CONFIG_FPGA is not set + +# +# Firmware Drivers +# +CONFIG_ARM_PSCI_FW=y +CONFIG_ARM_SCPI_PROTOCOL=y +CONFIG_ARM_SCPI_POWER_DOMAIN=y +# CONFIG_FIRMWARE_MEMMAP is not set +CONFIG_DMIID=y +# CONFIG_DMI_SYSFS is not set +# CONFIG_FW_CFG_SYSFS is not set +CONFIG_QCOM_SCM=y +CONFIG_QCOM_SCM_64=y +CONFIG_HAVE_ARM_SMCCC=y + +# +# EFI (Extensible Firmware Interface) Support +# +# CONFIG_EFI_VARS is not set +CONFIG_EFI_ESRT=y +CONFIG_EFI_PARAMS_FROM_FDT=y +CONFIG_EFI_RUNTIME_WRAPPERS=y +CONFIG_EFI_ARMSTUB=y +# CONFIG_EFI_CAPSULE_LOADER is not set +# CONFIG_EFI_TEST is not set +CONFIG_MESON_SM=y +CONFIG_ACPI=y +CONFIG_ACPI_GENERIC_GSI=y +CONFIG_ACPI_CCA_REQUIRED=y +# CONFIG_ACPI_DEBUGGER is not set +CONFIG_ACPI_SPCR_TABLE=y +# CONFIG_ACPI_EC_DEBUGFS is not set +CONFIG_ACPI_BUTTON=y +CONFIG_ACPI_FAN=y +# CONFIG_ACPI_DOCK is not set +CONFIG_ACPI_PROCESSOR_IDLE=y +CONFIG_ACPI_MCFG=y +CONFIG_ACPI_PROCESSOR=y +CONFIG_ACPI_HOTPLUG_CPU=y +CONFIG_ACPI_THERMAL=y +# CONFIG_ACPI_CUSTOM_DSDT is not set +CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y +CONFIG_ACPI_TABLE_UPGRADE=y +# CONFIG_ACPI_DEBUG is not set +# CONFIG_ACPI_PCI_SLOT is not set +CONFIG_ACPI_CONTAINER=y +# CONFIG_ACPI_HED is not set +# CONFIG_ACPI_CUSTOM_METHOD is not set +CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y +# CONFIG_PMIC_OPREGION is not set +# CONFIG_ACPI_CONFIGFS is not set +CONFIG_ACPI_IORT=y + +# +# File systems +# +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_POSIX_ACL=y +# CONFIG_EXT4_FS_SECURITY is not set +# CONFIG_EXT4_ENCRYPTION is not set +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_BTRFS_FS=m +CONFIG_BTRFS_FS_POSIX_ACL=y +# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set +# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set +# CONFIG_BTRFS_DEBUG is not set +# CONFIG_BTRFS_ASSERT is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_F2FS_FS is not set +# CONFIG_FS_DAX is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_EXPORTFS=y +# CONFIG_EXPORTFS_BLOCK_OPS is not set +CONFIG_FILE_LOCKING=y +CONFIG_MANDATORY_FILE_LOCKING=y +# CONFIG_FS_ENCRYPTION is not set +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_FANOTIFY=y +CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QUOTA_DEBUG is not set +# CONFIG_QFMT_V1 is not set +# CONFIG_QFMT_V2 is not set +CONFIG_QUOTACTL=y +CONFIG_AUTOFS4_FS=y +CONFIG_FUSE_FS=m +CONFIG_CUSE=m +CONFIG_OVERLAY_FS=m + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_FAT_DEFAULT_UTF8 is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_PROC_CHILDREN is not set +CONFIG_KERNFS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_TMPFS_XATTR is not set +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_ARCH_HAS_GIGANTIC_PAGE=y +CONFIG_CONFIGFS_FS=y +CONFIG_EFIVAR_FS=y +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ORANGEFS_FS is not set +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_LOGFS is not set +# CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_FILE_CACHE=y +# CONFIG_SQUASHFS_FILE_DIRECT is not set +CONFIG_SQUASHFS_DECOMP_SINGLE=y +# CONFIG_SQUASHFS_DECOMP_MULTI is not set +# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set +# CONFIG_SQUASHFS_XATTR is not set +CONFIG_SQUASHFS_ZLIB=y +# CONFIG_SQUASHFS_LZ4 is not set +# CONFIG_SQUASHFS_LZO is not set +# CONFIG_SQUASHFS_XZ is not set +# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_QNX6FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_PSTORE is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V2=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_SWAP is not set +CONFIG_NFS_V4_1=y +CONFIG_NFS_V4_2=y +CONFIG_PNFS_FILE_LAYOUT=y +CONFIG_PNFS_FLEXFILE_LAYOUT=m +CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" +# CONFIG_NFS_V4_1_MIGRATION is not set +CONFIG_NFS_V4_SECURITY_LABEL=y +CONFIG_ROOT_NFS=y +# CONFIG_NFS_USE_LEGACY_DNS is not set +CONFIG_NFS_USE_KERNEL_DNS=y +# CONFIG_NFSD is not set +CONFIG_GRACE_PERIOD=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_SUNRPC_BACKCHANNEL=y +# CONFIG_SUNRPC_DEBUG is not set +# CONFIG_CEPH_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +CONFIG_9P_FS=y +# CONFIG_9P_FS_POSIX_ACL is not set +# CONFIG_9P_FS_SECURITY is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_MAC_ROMAN is not set +# CONFIG_NLS_MAC_CELTIC is not set +# CONFIG_NLS_MAC_CENTEURO is not set +# CONFIG_NLS_MAC_CROATIAN is not set +# CONFIG_NLS_MAC_CYRILLIC is not set +# CONFIG_NLS_MAC_GAELIC is not set +# CONFIG_NLS_MAC_GREEK is not set +# CONFIG_NLS_MAC_ICELAND is not set +# CONFIG_NLS_MAC_INUIT is not set +# CONFIG_NLS_MAC_ROMANIAN is not set +# CONFIG_NLS_MAC_TURKISH is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set +CONFIG_HAVE_KVM_IRQCHIP=y +CONFIG_HAVE_KVM_IRQFD=y +CONFIG_HAVE_KVM_IRQ_ROUTING=y +CONFIG_HAVE_KVM_EVENTFD=y +CONFIG_KVM_MMIO=y +CONFIG_HAVE_KVM_MSI=y +CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y +CONFIG_KVM_VFIO=y +CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL=y +CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y +CONFIG_KVM_COMPAT=y +CONFIG_VIRTUALIZATION=y +CONFIG_KVM_ARM_VGIC_V3_ITS=y +CONFIG_KVM=y +CONFIG_KVM_ARM_HOST=y +CONFIG_KVM_ARM_PMU=y +# CONFIG_VHOST_NET is not set +# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set + +# +# Kernel hacking +# + +# +# printk and dmesg options +# +CONFIG_PRINTK_TIME=y +CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DYNAMIC_DEBUG is not set + +# +# Compile-time checks and compiler options +# +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_INFO_REDUCED is not set +# CONFIG_DEBUG_INFO_SPLIT is not set +# CONFIG_DEBUG_INFO_DWARF4 is not set +# CONFIG_GDB_SCRIPTS is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=2048 +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_READABLE_ASM is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_PAGE_OWNER is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_SECTION_MISMATCH is not set +CONFIG_SECTION_MISMATCH_WARN_ONLY=y +CONFIG_ARCH_WANT_FRAME_POINTERS=y +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 +CONFIG_DEBUG_KERNEL=y + +# +# Memory Debugging +# +# CONFIG_PAGE_EXTENSION is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PAGE_POISONING is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +CONFIG_HAVE_DEBUG_KMEMLEAK=y +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_VM is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_PER_CPU_MAPS is not set +CONFIG_HAVE_ARCH_KASAN=y +# CONFIG_KASAN is not set +CONFIG_ARCH_HAS_KCOV=y +# CONFIG_KCOV is not set +# CONFIG_DEBUG_SHIRQ is not set + +# +# Debug Lockups and Hangs +# +CONFIG_LOCKUP_DETECTOR=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_WQ_WATCHDOG is not set +# CONFIG_PANIC_ON_OOPS is not set +CONFIG_PANIC_ON_OOPS_VALUE=0 +CONFIG_PANIC_TIMEOUT=0 +# CONFIG_SCHED_DEBUG is not set +CONFIG_SCHED_INFO=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_SCHED_STACK_END_CHECK is not set +# CONFIG_DEBUG_TIMEKEEPING is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_PREEMPT is not set + +# +# Lock Debugging (spinlocks, mutexes, etc...) +# +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_ATOMIC_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_LOCK_TORTURE_TEST is not set +# CONFIG_STACKTRACE is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_HAVE_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_PI_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set + +# +# RCU Debugging +# +# CONFIG_PROVE_RCU is not set +# CONFIG_SPARSE_RCU_POINTER is not set +# CONFIG_TORTURE_TEST is not set +# CONFIG_RCU_PERF_TEST is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_RCU_CPU_STALL_TIMEOUT=21 +# CONFIG_RCU_TRACE is not set +# CONFIG_RCU_EQS_DEBUG is not set +# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set +# CONFIG_NOTIFIER_ERROR_INJECTION is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set + +# +# Runtime Testing +# +# CONFIG_LKDTM is not set +# CONFIG_TEST_LIST_SORT is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_RBTREE_TEST is not set +# CONFIG_INTERVAL_TREE_TEST is not set +# CONFIG_PERCPU_TEST is not set +# CONFIG_ATOMIC64_SELFTEST is not set +# CONFIG_TEST_HEXDUMP is not set +# CONFIG_TEST_STRING_HELPERS is not set +# CONFIG_TEST_KSTRTOX is not set +# CONFIG_TEST_PRINTF is not set +# CONFIG_TEST_BITMAP is not set +# CONFIG_TEST_UUID is not set +# CONFIG_TEST_RHASHTABLE is not set +# CONFIG_TEST_HASH is not set +# CONFIG_DMA_API_DEBUG is not set +# CONFIG_TEST_LKM is not set +# CONFIG_TEST_USER_COPY is not set +# CONFIG_TEST_BPF is not set +# CONFIG_TEST_FIRMWARE is not set +# CONFIG_TEST_UDELAY is not set +CONFIG_MEMTEST=y +# CONFIG_TEST_STATIC_KEYS is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y +# CONFIG_ARCH_WANTS_UBSAN_NO_NULL is not set +# CONFIG_UBSAN is not set +CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y +# CONFIG_STRICT_DEVMEM is not set +# CONFIG_ARM64_PTDUMP is not set +# CONFIG_PID_IN_CONTEXTIDR is not set +# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set +CONFIG_DEBUG_SET_MODULE_RONX=y +# CONFIG_DEBUG_ALIGN_RODATA is not set +# CONFIG_CORESIGHT is not set + +# +# Security options +# +CONFIG_KEYS=y +# CONFIG_PERSISTENT_KEYRINGS is not set +# CONFIG_BIG_KEYS is not set +# CONFIG_ENCRYPTED_KEYS is not set +# CONFIG_KEY_DH_OPERATIONS is not set +# CONFIG_SECURITY_DMESG_RESTRICT is not set +CONFIG_SECURITY=y +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_PATH is not set +CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y +CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y +# CONFIG_HARDENED_USERCOPY is not set +# CONFIG_SECURITY_SMACK is not set +# CONFIG_SECURITY_TOMOYO is not set +# CONFIG_SECURITY_APPARMOR is not set +# CONFIG_SECURITY_LOADPIN is not set +# CONFIG_SECURITY_YAMA is not set +CONFIG_INTEGRITY=y +# CONFIG_INTEGRITY_SIGNATURE is not set +CONFIG_INTEGRITY_AUDIT=y +# CONFIG_IMA is not set +# CONFIG_EVM is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_XOR_BLOCKS=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_RNG_DEFAULT=y +CONFIG_CRYPTO_AKCIPHER2=y +CONFIG_CRYPTO_KPP2=y +# CONFIG_CRYPTO_RSA is not set +# CONFIG_CRYPTO_DH is not set +# CONFIG_CRYPTO_ECDH is not set +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_USER is not set +CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=y +CONFIG_CRYPTO_NULL2=y +# CONFIG_CRYPTO_PCRYPT is not set +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_CRYPTD=y +# CONFIG_CRYPTO_MCRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set +CONFIG_CRYPTO_ABLK_HELPER=y + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +# CONFIG_CRYPTO_CHACHA20POLY1305 is not set +CONFIG_CRYPTO_SEQIV=m +CONFIG_CRYPTO_ECHAINIV=y + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +CONFIG_CRYPTO_CTR=m +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_KEYWRAP is not set + +# +# Hash modes +# +CONFIG_CRYPTO_CMAC=m +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_CRC32 is not set +CONFIG_CRYPTO_CRCT10DIF=y +CONFIG_CRYPTO_GHASH=m +# CONFIG_CRYPTO_POLY1305 is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +CONFIG_CRYPTO_SHA256=y +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_SHA3 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_CHACHA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +# CONFIG_CRYPTO_842 is not set +# CONFIG_CRYPTO_LZ4 is not set +# CONFIG_CRYPTO_LZ4HC is not set + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=y +CONFIG_CRYPTO_DRBG_MENU=y +CONFIG_CRYPTO_DRBG_HMAC=y +# CONFIG_CRYPTO_DRBG_HASH is not set +# CONFIG_CRYPTO_DRBG_CTR is not set +CONFIG_CRYPTO_DRBG=y +CONFIG_CRYPTO_JITTERENTROPY=y +# CONFIG_CRYPTO_USER_API_HASH is not set +# CONFIG_CRYPTO_USER_API_SKCIPHER is not set +# CONFIG_CRYPTO_USER_API_RNG is not set +# CONFIG_CRYPTO_USER_API_AEAD is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_MARVELL_CESA is not set +# CONFIG_CRYPTO_DEV_FSL_CAAM is not set +# CONFIG_CRYPTO_DEV_S5P is not set +# CONFIG_CRYPTO_DEV_CCP is not set +# CONFIG_CRYPTO_DEV_QCE is not set +# CONFIG_CRYPTO_DEV_ROCKCHIP is not set +# CONFIG_ASYMMETRIC_KEY_TYPE is not set + +# +# Certificates for signature checking +# +CONFIG_ARM64_CRYPTO=y +CONFIG_CRYPTO_SHA1_ARM64_CE=y +CONFIG_CRYPTO_SHA2_ARM64_CE=y +CONFIG_CRYPTO_GHASH_ARM64_CE=y +CONFIG_CRYPTO_AES_ARM64_CE=y +CONFIG_CRYPTO_AES_ARM64_CE_CCM=y +CONFIG_CRYPTO_AES_ARM64_CE_BLK=y +# CONFIG_CRYPTO_AES_ARM64_NEON_BLK is not set +CONFIG_CRYPTO_CRC32_ARM64=y +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_RAID6_PQ=m +CONFIG_BITREVERSE=y +CONFIG_HAVE_ARCH_BITREVERSE=y +CONFIG_RATIONAL=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_NET_UTILS=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_IO=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +# CONFIG_CRC_CCITT is not set +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +# CONFIG_CRC32_SELFTEST is not set +CONFIG_CRC32_SLICEBY8=y +# CONFIG_CRC32_SLICEBY4 is not set +# CONFIG_CRC32_SARWATE is not set +# CONFIG_CRC32_BIT is not set +CONFIG_CRC7=y +# CONFIG_LIBCRC32C is not set +# CONFIG_CRC8 is not set +CONFIG_AUDIT_GENERIC=y +CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y +CONFIG_AUDIT_COMPAT_GENERIC=y +# CONFIG_RANDOM32_SELFTEST is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_LZ4_DECOMPRESS=y +CONFIG_XZ_DEC=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_BCJ=y +# CONFIG_XZ_DEC_TEST is not set +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_XZ=y +CONFIG_DECOMPRESS_LZO=y +CONFIG_DECOMPRESS_LZ4=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_RADIX_TREE_MULTIORDER=y +CONFIG_ASSOCIATIVE_ARRAY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HAS_DMA=y +CONFIG_CPU_RMAP=y +CONFIG_DQL=y +CONFIG_GLOB=y +# CONFIG_GLOB_SELFTEST is not set +CONFIG_NLATTR=y +# CONFIG_CORDIC is not set +# CONFIG_DDR is not set +# CONFIG_IRQ_POLL is not set +CONFIG_LIBFDT=y +CONFIG_OID_REGISTRY=y +CONFIG_UCS2_STRING=y +CONFIG_FONT_SUPPORT=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_SG_SPLIT is not set +CONFIG_SG_POOL=y +CONFIG_ARCH_HAS_SG_CHAIN=y +CONFIG_SBITMAP=y diff --git a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/touch.cfg b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/touch.cfg new file mode 100644 index 0000000..327c753 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/touch.cfg @@ -0,0 +1 @@ +CONFIG_HID_MULTITOUCH=y diff --git a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/usb-video-class.cfg b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/usb-video-class.cfg new file mode 100644 index 0000000..7446787 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas/usb-video-class.cfg @@ -0,0 +1,68 @@ +CONFIG_MEDIA_USB_SUPPORT=y + +# +# Webcam devices +# +CONFIG_USB_VIDEO_CLASS=y +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +# CONFIG_USB_M5602 is not set +# CONFIG_USB_STV06XX is not set +# CONFIG_USB_GL860 is not set +# CONFIG_USB_GSPCA_BENQ is not set +# CONFIG_USB_GSPCA_CONEX is not set +# CONFIG_USB_GSPCA_CPIA1 is not set +# CONFIG_USB_GSPCA_DTCS033 is not set +# CONFIG_USB_GSPCA_ETOMS is not set +# CONFIG_USB_GSPCA_FINEPIX is not set +# CONFIG_USB_GSPCA_JEILINJ is not set +# CONFIG_USB_GSPCA_JL2005BCD is not set +# CONFIG_USB_GSPCA_KINECT is not set +# CONFIG_USB_GSPCA_KONICA is not set +# CONFIG_USB_GSPCA_MARS is not set +# CONFIG_USB_GSPCA_MR97310A is not set +# CONFIG_USB_GSPCA_NW80X is not set +# CONFIG_USB_GSPCA_OV519 is not set +# CONFIG_USB_GSPCA_OV534 is not set +# CONFIG_USB_GSPCA_OV534_9 is not set +# CONFIG_USB_GSPCA_PAC207 is not set +# CONFIG_USB_GSPCA_PAC7302 is not set +# CONFIG_USB_GSPCA_PAC7311 is not set +# CONFIG_USB_GSPCA_SE401 is not set +# CONFIG_USB_GSPCA_SN9C2028 is not set +# CONFIG_USB_GSPCA_SN9C20X is not set +# CONFIG_USB_GSPCA_SONIXB is not set +# CONFIG_USB_GSPCA_SONIXJ is not set +# CONFIG_USB_GSPCA_SPCA500 is not set +# CONFIG_USB_GSPCA_SPCA501 is not set +# CONFIG_USB_GSPCA_SPCA505 is not set +# CONFIG_USB_GSPCA_SPCA506 is not set +# CONFIG_USB_GSPCA_SPCA508 is not set +# CONFIG_USB_GSPCA_SPCA561 is not set +# CONFIG_USB_GSPCA_SPCA1528 is not set +# CONFIG_USB_GSPCA_SQ905 is not set +# CONFIG_USB_GSPCA_SQ905C is not set +# CONFIG_USB_GSPCA_SQ930X is not set +# CONFIG_USB_GSPCA_STK014 is not set +# CONFIG_USB_GSPCA_STK1135 is not set +# CONFIG_USB_GSPCA_STV0680 is not set +# CONFIG_USB_GSPCA_SUNPLUS is not set +# CONFIG_USB_GSPCA_T613 is not set +# CONFIG_USB_GSPCA_TOPRO is not set +# CONFIG_USB_GSPCA_TOUPTEK is not set +# CONFIG_USB_GSPCA_TV8532 is not set +# CONFIG_USB_GSPCA_VC032X is not set +# CONFIG_USB_GSPCA_VICAM is not set +# CONFIG_USB_GSPCA_XIRLINK_CIT is not set +# CONFIG_USB_GSPCA_ZC3XX is not set +# CONFIG_USB_PWC is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_USB_ZR364XX is not set +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +# CONFIG_VIDEO_USBTV is not set + +# +# Webcam, TV (analog/digital) USB devices +# +# CONFIG_VIDEO_EM28XX is not set diff --git a/meta-rcar-gen3/recipes-kernel/linux/linux-renesas_4.9.bb b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas_4.9.bb new file mode 100644 index 0000000..05578db --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/linux/linux-renesas_4.9.bb @@ -0,0 +1,27 @@ +DESCRIPTION = "Linux kernel for the R-Car Generation 3 based board" + +require include/avb-control.inc +require recipes-kernel/linux/linux-yocto.inc + +FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}/:" +COMPATIBLE_MACHINE = "salvator-x|h3ulcb|m3ulcb" + +RENESAS_BSP_URL = "git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas-bsp.git" +BRANCH = "v4.9/rcar-3.5.8" +SRCREV = "bef6058b0ba00238b19e7518ba76536218ef97f1" + +SRC_URI = "${RENESAS_BSP_URL};protocol=git;nocheckout=1;branch=${BRANCH}" + +LINUX_VERSION ?= "4.9.0" +PV = "${LINUX_VERSION}+git${SRCPV}" +PR = "r1" + +SRC_URI_append = " \ + file://0001-dmaengine-rcar-dmac-ensure-CHCR-DE-bit-is-actually-0.patch \ + file://0002-dmaengine-rcar-dmac-use-TCRB-instead-of-TCR-for-resi.patch \ + file://0003-ASoC-rcar-revert-IOMMU-support-so-far.patch \ + file://0004-m3ulcb-ADSP-enable.patch \ + file://defconfig \ + file://touch.cfg \ + ${@base_conditional("USE_AVB", "1", " file://usb-video-class.cfg", "", d)} \ +" diff --git a/meta-rcar-gen3/recipes-kernel/optee-linuxdriver/optee-linuxdriver_git.bb b/meta-rcar-gen3/recipes-kernel/optee-linuxdriver/optee-linuxdriver_git.bb new file mode 100644 index 0000000..ed0d496 --- /dev/null +++ b/meta-rcar-gen3/recipes-kernel/optee-linuxdriver/optee-linuxdriver_git.bb @@ -0,0 +1,79 @@ +DESCRIPTION = "OP-TEE Linux Driver" +LICENSE = "GPLv2" +LIC_FILES_CHKSUM = " \ + file://LICENSE;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ +" +inherit module + +PN = "optee-linuxdriver" +PR = "r0" +BRANCH = "rcar_gen3" +SRC_URI = " \ + git://github.com/renesas-rcar/optee_linuxdriver.git;branch=${BRANCH} \ +" +SRCREV = "3fd77f0dd8a070945f869ec706ebe48fc0d27c20" + +PV = "1.1.0+renesas+git${SRCPV}" + +PACKAGE_ARCH = "${MACHINE_ARCH}" + +S = "${WORKDIR}/git" + +LDFLAGS[unexport] = "1" + +do_configure[noexec] = "1" +# We need to be staged before do_complie. This recipe does not execute do_configure. +do_complile[depends] += "virtual/kernel:do_shared_workdir" + +do_compile() { + # Build kernel module + cd ${S}/ + make -C ${KBUILD_OUTPUT} M=${S} modules +} + +do_install() { + # Create shared directories + install -d ${D}/lib/modules/${KERNEL_VERSION}/extra/ + install -d ${STAGING_KERNEL_DIR}/include + install -d ${STAGING_KERNEL_DIR}/include/arm_common + install -d ${STAGING_KERNEL_DIR}/include/linux + + # Install kernel module + install -m 0644 ${S}/core/optee.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/ + install -m 0644 ${S}/armtz/optee_armtz.ko ${D}/lib/modules/${KERNEL_VERSION}/extra/ + + + # Install shared library to STAGING_KERNEL_DIR for reference from other modules + # This file installed in SDK by kernel-devsrc pkg. + install -m 0644 ${S}/Module.symvers ${STAGING_KERNEL_DIR}/include/optee.symvers + + # Install shared header files to STAGING_KERNEL_DIR + # This file installed in SDK by kernel-devsrc pkg. + install -m 0644 ${S}/include/arm_common/optee_msg.h ${STAGING_KERNEL_DIR}/include/arm_common/ + install -m 0644 ${S}/include/arm_common/optee_smc.h ${STAGING_KERNEL_DIR}/include/arm_common/ + install -m 0644 ${S}/include/linux/tee_client_api.h ${STAGING_KERNEL_DIR}/include/linux/ + install -m 0644 ${S}/include/linux/tee_core.h ${STAGING_KERNEL_DIR}/include/linux/ + install -m 0644 ${S}/include/linux/tee_ioc.h ${STAGING_KERNEL_DIR}/include/linux/ + install -m 0644 ${S}/include/linux/tee_kernel_api.h ${STAGING_KERNEL_DIR}/include/linux/ +} + +PACKAGES = "\ + ${PN} \ + ${PN}-armtz \ +" + +FILES_${PN} = " \ + /lib/modules/${KERNEL_VERSION}/extra/optee.ko \ +" + +FILES_${PN}-armtz = " \ + /lib/modules/${KERNEL_VERSION}/extra/optee_armtz.ko \ +" + +RPROVIDES_${PN} += " \ + optee-linuxdriver \ + kernel-module-optee \ + kernel-module-optee-armtz \ + kernel-module-optee-${KERNEL_VERSION} \ + kernel-module-optee-armtz-${KERNEL_VERSION} \ +" diff --git a/meta-rcar-gen3/recipes-multimedia/adsp-module/adsp-fw-module.bb b/meta-rcar-gen3/recipes-multimedia/adsp-module/adsp-fw-module.bb new file mode 100644 index 0000000..c57a47a --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/adsp-module/adsp-fw-module.bb @@ -0,0 +1,29 @@ +DESCRIPTION = "ADSP Framework for Linux" +LICENSE = "CLOSED" + +require include/adsp-control.inc + +SRC_URI = "${@base_conditional('USE_ADSP', '1', 'file://RCG3AHFWN0101ZDP.tar.gz', '', d )}" + +do_configure[noexec] = "1" +do_compile[noexec] = "1" + +PACKAGE_ARCH = "${MACHINE_ARCH}" + +S = "${WORKDIR}/RCG3AHFWN0101ZDP" + +do_install() { + # create the firmware dir + install -d ${D}/lib/firmware + + # install the firmware bin + install -m 0644 ${S}/lib/firmware/xf-rcar.fw ${D}/lib/firmware +} + +PACKAGES = " \ + ${PN} \ +" + +FILES_${PN} = " \ + /lib/firmware \ +" diff --git a/meta-rcar-gen3/recipes-multimedia/adsp-module/adsp-if-module.bb b/meta-rcar-gen3/recipes-multimedia/adsp-module/adsp-if-module.bb new file mode 100644 index 0000000..7128f7d --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/adsp-module/adsp-if-module.bb @@ -0,0 +1,58 @@ +DESCRIPTION = "ADSP Interface for Linux" +LICENSE = "CLOSED" + +require include/adsp-control.inc + +DEPENDS += "kernel-module-xtensa-hifi" + +SRC_URI = "${@base_conditional('USE_ADSP', '1', 'file://RCG3AHIFL4001ZDP.tar.gz', '', d )}" + +S = "${WORKDIR}/RCG3AHIFL4001ZDP" + +PACKAGE_ARCH = "${MACHINE_ARCH}" + +# Don't need to do_configure +do_configure[noexec] = "1" + +# Don't use EXTRA_OEMAKE default value to avoid default CFLAGS, LDFLAGS +# of poky override the CFLAGS, LDFLAGS inside RCG3AHIFL4001ZDP/Makefile +EXTRA_OEMAKE = "INCSHARED=${STAGING_INCDIR}" + +do_compile() { + cd ${S} + oe_runmake +} + +do_install() { + # Create destination directory + install -d ${D}/${libdir} + install -d ${D}/${includedir} + install -d ${D}/${includedir}/sys/fio + install -d ${D}/${includedir}/os/linux + + # Copy library + install -m 0755 ${S}/libRCG3AHIFL4001ZDP.so.1.0 ${D}/${libdir} + + # Copy shared header files + install -m 0644 ${S}/include/*.h ${D}/${includedir} + install -m 0644 ${S}/include/sys/fio/*.h ${D}/${includedir}/sys/fio/ + install -m 0644 ${S}/include/os/linux/*.h ${D}/${includedir}/os/linux/ + + # Create the symbolic link + cd ${D}/${libdir} + ln -s libRCG3AHIFL4001ZDP.so.1.0 libRCG3AHIFL4001ZDP.so.1 + ln -s libRCG3AHIFL4001ZDP.so.1 libRCG3AHIFL4001ZDP.so +} + +PACKAGES = " \ + ${PN} \ + ${PN}-dev \ + ${PN}-dbg \ +" + +INSANE_SKIP_${PN} += "dev-so" + +FILES_${PN} += " \ + ${libdir}/*.so* \ + ${includedir} \ +" diff --git a/meta-rcar-gen3/recipes-multimedia/avb-applications/avb-applications.inc b/meta-rcar-gen3/recipes-multimedia/avb-applications/avb-applications.inc new file mode 100644 index 0000000..2d2c557 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/avb-applications/avb-applications.inc @@ -0,0 +1,9 @@ +require include/avb-control.inc +require include/rcar-gen3-modules-common.inc + +inherit distro_features_check + +REQUIRED_DISTRO_FEATURES = "avb" + +SRC_URI = "git://github.com/renesas-rcar/avb-applications.git;branch=rcar-gen3" +SRCREV = "e959010b9b26b684a53db536a02b2f96f0d177ac" diff --git a/meta-rcar-gen3/recipes-multimedia/avb-applications/avb-demoapps.bb b/meta-rcar-gen3/recipes-multimedia/avb-applications/avb-demoapps.bb new file mode 100644 index 0000000..36253d8 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/avb-applications/avb-demoapps.bb @@ -0,0 +1,123 @@ +DESCRIPTION = "Renesas Ethernet AVB demo applications" + +require avb-applications.inc + +LICENSE = "MIT & BSD" +LIC_FILES_CHKSUM = " \ + file://COPYING.MIT;md5=96659f2a7571bfa27483882a653c3bb9 \ + file://lib/msrp/LICENSE.BSD;md5=60ba0ea0afdcbf8d26ce31ce1503aba3 \ + file://lib/avdecc/jdksavdecc-c/COPYRIGHT;md5=6592ded5140540a936b8d98ed1b6a577 \ + file://avblauncher/inih/LICENSE.txt;md5=a7a95d2af90376e85a05318794e6f202 \ +" + +DEPENDS = "kernel-module-avb-streaming libyaml" + +S = "${WORKDIR}/git/avb-demoapps" + +includedir = "${RENESAS_DATADIR}/include" + +# submodule is extracted before do_populate_lic +addtask do_init_submodule after do_unpack before do_patch + +do_init_submodule() { + export http_proxy=${http_proxy} + export https_proxy=${https_proxy} + export HTTP_PROXY=${HTTP_PROXY} + export HTTPS_PROXY=${HTTPS_PROXY} + cd ${S} + git submodule init + git submodule update +} + +EXTRA_OEMAKE = "'CC=${CC}' 'AR=${AR}'" + +do_install_append() { + oe_runmake install INSTALL_DIR=${D}/${bindir} + + # Create intall directories + install -d ${D}/${sysconfdir}/linuxptp + install -d ${D}/${sysconfdir}/daemon_cl + install -d ${D}/${sysconfdir}/avblauncher + + # Install + install -m 644 ${S}/etc/linuxptp/avb-demoapps.cfg ${D}/${sysconfdir}/linuxptp + install -m 644 ${S}/etc/daemon_cl/gptp_cfg_100mb.ini ${D}/${sysconfdir}/daemon_cl + install -m 644 ${S}/etc/daemon_cl/gptp_cfg.ini ${D}/${sysconfdir}/daemon_cl + install -m 755 ${S}/etc/avblauncher/mse_aaf_pcm.sh ${D}/${sysconfdir}/avblauncher + install -m 644 ${S}/etc/avblauncher/mse_aaf_pcm_listener.ini ${D}/${sysconfdir}/avblauncher + install -m 644 ${S}/etc/avblauncher/mse_aaf_pcm_talker.ini ${D}/${sysconfdir}/avblauncher + install -m 755 ${S}/etc/avblauncher/mse_cvf_h264.sh ${D}/${sysconfdir}/avblauncher + install -m 755 ${S}/etc/avblauncher/mse_cvf_h264_d13.sh ${D}/${sysconfdir}/avblauncher + install -m 644 ${S}/etc/avblauncher/mse_cvf_h264_d13_listener.ini ${D}/${sysconfdir}/avblauncher + install -m 644 ${S}/etc/avblauncher/mse_cvf_h264_d13_talker.ini ${D}/${sysconfdir}/avblauncher + install -m 644 ${S}/etc/avblauncher/mse_cvf_h264_listener.ini ${D}/${sysconfdir}/avblauncher + install -m 644 ${S}/etc/avblauncher/mse_cvf_h264_talker.ini ${D}/${sysconfdir}/avblauncher + install -m 755 ${S}/etc/avblauncher/mse_cvf_mjpeg.sh ${D}/${sysconfdir}/avblauncher + install -m 644 ${S}/etc/avblauncher/mse_cvf_mjpeg_listener.ini ${D}/${sysconfdir}/avblauncher + install -m 644 ${S}/etc/avblauncher/mse_cvf_mjpeg_talker.ini ${D}/${sysconfdir}/avblauncher + install -m 755 ${S}/etc/avblauncher/mse_iec61883_4.sh ${D}/${sysconfdir}/avblauncher + install -m 644 ${S}/etc/avblauncher/mse_iec61883_4_listener.ini ${D}/${sysconfdir}/avblauncher + install -m 644 ${S}/etc/avblauncher/mse_iec61883_4_talker.ini ${D}/${sysconfdir}/avblauncher + install -m 755 ${S}/etc/avblauncher/mse_iec61883_6.sh ${D}/${sysconfdir}/avblauncher + install -m 644 ${S}/etc/avblauncher/mse_iec61883_6_listener.ini ${D}/${sysconfdir}/avblauncher + install -m 644 ${S}/etc/avblauncher/mse_iec61883_6_talker.ini ${D}/${sysconfdir}/avblauncher + install -m 755 ${S}/etc/avblauncher/simple_application.sh ${D}/${sysconfdir}/avblauncher + install -m 644 ${S}/etc/avblauncher/simple_listener.ini ${D}/${sysconfdir}/avblauncher + install -m 644 ${S}/etc/avblauncher/simple_talker.ini ${D}/${sysconfdir}/avblauncher + install -m 644 ${S}/etc/avblauncher/avdecc_entity_audio.yaml ${D}/${sysconfdir}/avblauncher +} + +PACKAGES =+ " \ + ${PN}-simple \ + ${PN}-mrpdummy \ + ${PN}-avblauncher \ +" + +ALLOW_EMPTY_${PN} = "1" + +FILES_${PN}-mrpdummy = " \ + ${bindir}/mrpdummy \ +" + +FILES_${PN}-avblauncher = " \ + ${sysconfdir}/daemon_cl/gptp_cfg_100mb.ini \ + ${sysconfdir}/daemon_cl/gptp_cfg.ini \ + ${sysconfdir}/avblauncher/mse_aaf_pcm.sh \ + ${sysconfdir}/avblauncher/mse_aaf_pcm_listener.ini \ + ${sysconfdir}/avblauncher/mse_aaf_pcm_talker.ini \ + ${sysconfdir}/avblauncher/mse_cvf_h264.sh \ + ${sysconfdir}/avblauncher/mse_cvf_h264_d13.sh \ + ${sysconfdir}/avblauncher/mse_cvf_h264_d13_listener.ini \ + ${sysconfdir}/avblauncher/mse_cvf_h264_d13_talker.ini \ + ${sysconfdir}/avblauncher/mse_cvf_h264_listener.ini \ + ${sysconfdir}/avblauncher/mse_cvf_h264_talker.ini \ + ${sysconfdir}/avblauncher/mse_cvf_mjpeg.sh \ + ${sysconfdir}/avblauncher/mse_cvf_mjpeg_listener.ini \ + ${sysconfdir}/avblauncher/mse_cvf_mjpeg_talker.ini \ + ${sysconfdir}/avblauncher/mse_iec61883_4.sh \ + ${sysconfdir}/avblauncher/mse_iec61883_4_listener.ini \ + ${sysconfdir}/avblauncher/mse_iec61883_4_talker.ini \ + ${sysconfdir}/avblauncher/mse_iec61883_6.sh \ + ${sysconfdir}/avblauncher/mse_iec61883_6_listener.ini \ + ${sysconfdir}/avblauncher/mse_iec61883_6_talker.ini \ + ${sysconfdir}/avblauncher/simple_application.sh \ + ${sysconfdir}/avblauncher/simple_listener.ini \ + ${sysconfdir}/avblauncher/simple_talker.ini \ + ${sysconfdir}/avblauncher/avdecc_entity_audio.yaml \ + ${bindir}/avblauncher \ +" + +FILES_${PN}-simple = " \ + ${sysconfdir}/linuxptp/avb-demoapps.cfg \ + ${bindir}/simple_talker \ + ${bindir}/simple_listener \ +" + +RDEPENDS_${PN} = " \ + ${PN}-simple \ + ${PN}-avblauncher \ +" + +RDEPENDS_${PN}-avblauncher = " \ + ${PN}-mrpdummy \ +" diff --git a/meta-rcar-gen3/recipes-multimedia/avb-applications/avbtool.bb b/meta-rcar-gen3/recipes-multimedia/avb-applications/avbtool.bb new file mode 100644 index 0000000..5c00277 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/avb-applications/avbtool.bb @@ -0,0 +1,17 @@ +DESCRIPTION = "Utility tool of the AVB Streaming Driver for Linux for the R-Car Gen3" + +require avb-applications.inc + +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://COPYING.MIT;md5=96659f2a7571bfa27483882a653c3bb9" + +DEPENDS = "kernel-module-avb-streaming" + +S = "${WORKDIR}/git/avbtool" + +EXTRA_OEMAKE = "'CC=${CC}'" + +do_install_append() { + install -d ${D}/${bindir} + install -m 755 ${S}/avbtool ${D}/${bindir} +} diff --git a/meta-rcar-gen3/recipes-multimedia/cms-module/cms-user-module.bb b/meta-rcar-gen3/recipes-multimedia/cms-module/cms-user-module.bb new file mode 100644 index 0000000..952b230 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/cms-module/cms-user-module.bb @@ -0,0 +1,74 @@ +DESCRIPTION = "R-Car Gen3 Color Management System" +LICENSE = "CLOSED" + +require include/cms-control.inc + +SRC_CMSBCM = "${@bb.utils.contains('USE_CMSBCM', '1', 'file://RTM0AC0000JRCMBCV0SL40C.tar.gz;subdir=cms/bcm', '', d)}" +SRC_CMSBLC = "${@bb.utils.contains('USE_CMSBLC', '1', 'file://RTM0AC0000JRCMBLC0SL40C.tar.gz;subdir=cms/blc', '', d)}" +SRC_CMSDGC = "${@bb.utils.contains('USE_CMSDGC', '1', 'file://RTM0AC0000JRCMDGV0SL40C.tar.gz;subdir=cms/dgc', '', d)}" + +SRC_URI = " \ + ${SRC_CMSBCM} \ + ${SRC_CMSBLC} \ + ${SRC_CMSDGC} \ +" + +S = "${WORKDIR}/cms" + +PACKAGE_ARCH = "${MACHINE_ARCH}" + +do_configure[noexec] = "1" +do_compile[noexec] = "1" + +do_install() { + # Create the lib directory + install -d ${D}/${libdir} + + if [ "X${USE_CMSBCM}" = "X1" ]; then + install -d ${D}/${includedir}/cms/bcm + install -m 755 ${S}/bcm/${baselib}/libcmsbcm.so.1.0.0 ${D}/${libdir} + install -m 644 ${S}/bcm/include/*.h ${D}/${includedir}/cms/bcm + + cd ${D}/${libdir} + ln -s libcmsbcm.so.1.0.0 libcmsbcm.so.1 + ln -s libcmsbcm.so.1 libcmsbcm.so + fi + + if [ "X${USE_CMSBLC}" = "X1" ]; then + install -d ${D}/${includedir}/cms/blc + install -m 755 ${S}/blc/${baselib}/libcmsblc.so.1.0.0 ${D}/${libdir} + install -m 644 ${S}/blc/include/*.h ${D}/${includedir}/cms/blc + + cd ${D}/${libdir} + ln -s libcmsblc.so.1.0.0 libcmsblc.so.1 + ln -s libcmsblc.so.1 libcmsblc.so + fi + + if [ "X${USE_CMSDGC}" = "X1" ]; then + install -d ${D}/${includedir}/cms/dgc + install -m 755 ${S}/dgc/${baselib}/libcmsdgc.so.1.0.0 ${D}/${libdir} + install -m 644 ${S}/dgc/include/*.h ${D}/${includedir}/cms/dgc + + cd ${D}/${libdir} + ln -s libcmsdgc.so.1.0.0 libcmsdgc.so.1 + ln -s libcmsdgc.so.1 libcmsdgc.so + fi +} + +FILES_${PN} = " \ + ${libdir}/*.so.* \ + ${libdir}/lib*.so \ +" + +FILES_${PN}-dev = " \ + ${includedir} \ +" + +INSANE_SKIP_${PN} = "dev-so" + +# Skip debug strip of do_populate_sysroot() +INHIBIT_SYSROOT_STRIP = "1" + +# Skip debug split and strip of do_package() +INHIBIT_PACKAGE_DEBUG_SPLIT = "1" +INHIBIT_PACKAGE_STRIP = "1" diff --git a/meta-rcar-gen3/recipes-multimedia/dtv-module/dtv-user-module.bb b/meta-rcar-gen3/recipes-multimedia/dtv-module/dtv-user-module.bb new file mode 100644 index 0000000..55efa92 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/dtv-module/dtv-user-module.bb @@ -0,0 +1,72 @@ +DESCRIPTION = "ISDB-T DTV Software Package for Linux for the R-Car Gen3" +LICENSE = "CLOSED" + +require include/rcar-gen3-modules-common.inc +require include/dtv-dvd-control.inc + +inherit distro_features_check + +DEPENDS = " \ + kernel-module-vspmif mmngr-user-module \ + vspmif-user-module kernel-module-vspmif kernel-module-vspm \ + omx-user-module kernel-module-uvcs-drv \ + kernel-module-scu-src kernel-module-ssp \ + kernel-module-tddmac kernel-module-tsif \ +" + +PN = "dtv-user-module" +PR = "r0" + +PACKAGE_ARCH = "${MACHINE_ARCH}" + +REQUIRED_DISTRO_FEATURES = "dtv" + +SRC_URI_DTV_SW = "file://Software.tar.gz" +SRC_URI_DTV_UDF = "file://Reference.tar.gz" + +SRC_URI = " \ + ${SRC_URI_DTV_SW} \ + ${SRC_URI_DTV_UDF} \ +" + +S = "${WORKDIR}" + +# do_configure() nothing +do_configure[noexec] = "1" +# do_compile() nothing +do_compile[noexec] = "1" + +do_install() { + # Create destination folders + install -d ${D}/${libdir} + install -d ${D}${RENESAS_DATADIR}/include + install -d ${D}${RENESAS_DATADIR}/src/dtv/reference + + # Copy library + install -m 644 ${S}/${baselib}/*.a ${D}/${libdir}/ + + # Copy shared header files + install -m 644 ${S}/include/*.h ${D}${RENESAS_DATADIR}/include + + # Copy reference files + install -m 644 ${S}/userfunc/*.h ${D}${RENESAS_DATADIR}/src/dtv/reference + install -m 644 ${S}/userfunc/*.c ${D}${RENESAS_DATADIR}/src/dtv/reference +} + +PACKAGES = " \ + ${PN} \ + ${PN}-dev \ + ${PN}-staticdev \ +" + +FILES_${PN} = "" +ALLOW_EMPTY_${PN} = "1" + +FILES_${PN}-dev = " \ + ${RENESAS_DATADIR}/include/*.h \ + ${RENESAS_DATADIR}/src/dtv/reference/* \ +" +FILES_${PN}-staticdev = " \ + ${libdir}/*.a \ +" +INHIBIT_PACKAGE_DEBUG_SPLIT = "1" diff --git a/meta-rcar-gen3/recipes-multimedia/dvd-module/dvd-user-module.bb b/meta-rcar-gen3/recipes-multimedia/dvd-module/dvd-user-module.bb new file mode 100644 index 0000000..aead035 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/dvd-module/dvd-user-module.bb @@ -0,0 +1,62 @@ +DESCRIPTION = "DVD Core-Middleware for Linux for the R-Car Gen3" +LICENSE = "CLOSED" + +require include/rcar-gen3-modules-common.inc +require include/dtv-dvd-control.inc + +inherit distro_features_check + +DEPENDS = " \ + kernel-module-vspmif mmngr-user-module \ + vspmif-user-module kernel-module-vspmif kernel-module-vspm \ + omx-user-module kernel-module-uvcs-drv \ +" + +PN = "dvd-user-module" +PR = "r0" + +PACKAGE_ARCH = "${MACHINE_ARCH}" + +REQUIRED_DISTRO_FEATURES = "dvd" + +SRC_URI_DVD_SW = "file://Software.tar.gz" + +SRC_URI = " \ + ${SRC_URI_DVD_SW} \ +" + +S = "${WORKDIR}" + +# do_configure() nothing +do_configure[noexec] = "1" +# do_compile() nothing +do_compile[noexec] = "1" + +do_install() { + # Create destination folders + install -d ${D}/${libdir} + install -d ${D}${RENESAS_DATADIR}/include + + # Copy library + install -m 644 ${S}/${baselib}/*.a ${D}/${libdir} + + # Copy shared header files + install -m 644 ${S}/include/*.h ${D}${RENESAS_DATADIR}/include +} + +PACKAGES = " \ + ${PN} \ + ${PN}-dev \ + ${PN}-staticdev \ +" + +FILES_${PN} = "" +ALLOW_EMPTY_${PN} = "1" + +FILES_${PN}-dev = " \ + ${RENESAS_DATADIR}/include/*.h \ +" +FILES_${PN}-staticdev = " \ + ${libdir}/*.a \ +" +INHIBIT_PACKAGE_DEBUG_SPLIT = "1" diff --git a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-omx_1.2.0.bbappend b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-omx_1.2.0.bbappend new file mode 100644 index 0000000..9a30dd9 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-omx_1.2.0.bbappend @@ -0,0 +1,29 @@ +SRC_URI_remove = "http://gstreamer.freedesktop.org/src/gst-omx/gst-omx-${PV}.tar.xz" +SRC_URI_append = " git://github.com/renesas-rcar/gst-omx.git;branch=RCAR-GEN3/1.2.0" + +DEPENDS += "omx-user-module mmngrbuf-user-module" + +SRCREV = "50b1a326521f909f6baa4708ce42e671013b8dab" + +LIC_FILES_CHKSUM = "file://COPYING;md5=4fbd65380cdd255951079008b364516c \ + file://omx/gstomx.h;beginline=1;endline=22;md5=9281ffe981001da5a13db0303fa7c4ab \ +" + +S = "${WORKDIR}/git" + +GSTREAMER_1_0_OMX_TARGET = "rcar" +GSTREAMER_1_0_OMX_CORE_NAME = "${libdir}/libomxr_core.so" +EXTRA_OECONF_append = " --enable-experimental" +EXTRA_OECONF_append = " --with-omx-header-path=${S}/omx/openmax" + +do_configure_prepend() { + export http_proxy=${http_proxy} + export https_proxy=${https_proxy} + export HTTP_PROXY=${HTTP_PROXY} + export HTTPS_PROXY=${HTTPS_PROXY} + cd ${S} + ./autogen.sh --noconfigure + cd ${B} +} + +RDEPENDS_${PN} = "libwayland-egl" diff --git a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-h3ulcb_r8a7795.conf b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-h3ulcb_r8a7795.conf new file mode 100644 index 0000000..4807dc3 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-h3ulcb_r8a7795.conf @@ -0,0 +1,2 @@ +input-device-name=/dev/video12 +output-device-name=/dev/video13 diff --git a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-m3ulcb_r8a7796.conf b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-m3ulcb_r8a7796.conf new file mode 100644 index 0000000..890c5ad --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-m3ulcb_r8a7796.conf @@ -0,0 +1,2 @@ +input-device-name=/dev/video6 +output-device-name=/dev/video7 diff --git a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-salvator-x_r8a7795.conf b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-salvator-x_r8a7795.conf new file mode 100644 index 0000000..586b13b --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-salvator-x_r8a7795.conf @@ -0,0 +1,2 @@ +input-device-name=/dev/video20 +output-device-name=/dev/video21 diff --git a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-salvator-x_r8a7796.conf b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-salvator-x_r8a7796.conf new file mode 100644 index 0000000..74a8ab9 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter/gstvspfilter-salvator-x_r8a7796.conf @@ -0,0 +1,2 @@ +input-device-name=/dev/video14 +output-device-name=/dev/video15 diff --git a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter_1.0.0.bb b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter_1.0.0.bb new file mode 100644 index 0000000..02a7ba2 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugin-vspfilter_1.0.0.bb @@ -0,0 +1,37 @@ +SUMMARY = "GStreamer VSP filter plugin" +SECTION = "multimedia" +LICENSE = "GPLv2+" +DEPENDS = "gstreamer1.0 gstreamer1.0-plugins-base pkgconfig" +LIC_FILES_CHKSUM = "file://COPYING.LIB;md5=4fbd65380cdd255951079008b364516c" +inherit autotools pkgconfig + +PN = "gstreamer1.0-plugin-vspfilter" + +EXTRA_AUTORECONF_append = " -I ${STAGING_DATADIR}/aclocal" + +VSPFILTER_CONF_r8a7795 = "gstvspfilter-${MACHINE}_r8a7795.conf" +VSPFILTER_CONF_r8a7796 = "gstvspfilter-${MACHINE}_r8a7796.conf" + +SRC_URI = " \ + git://github.com/renesas-rcar/gst-plugin-vspfilter.git;branch=RCAR-GEN3/1.0.0 \ + file://${VSPFILTER_CONF} \ +" + +SRCREV = "50eefe877d2198092ba41316456d73e02dba0def" + +S = "${WORKDIR}/git" + +FILES_${PN} = " \ + ${libdir}/gstreamer-1.0/libgstvspfilter.so \ + ${sysconfdir}/gstvspfilter.conf" +FILES_${PN}-dev = "${libdir}/gstreamer-1.0/libgstvspfilter.la" +FILES_${PN}-staticdev = "${libdir}/gstreamer-1.0/libgstvspfilter.a" +FILES_${PN}-dbg = " \ + ${libdir}/gstreamer-1.0/.debug \ + ${prefix}/src" + +do_install_append() { + install -Dm 644 ${WORKDIR}/${VSPFILTER_CONF} ${D}/etc/gstvspfilter.conf +} + +RDEPENDS_${PN} = "kernel-module-vsp2driver" diff --git a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_1.6.3.bbappend b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_1.6.3.bbappend new file mode 100644 index 0000000..072d683 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_1.6.3.bbappend @@ -0,0 +1,29 @@ +SRC_URI_remove = "http://gstreamer.freedesktop.org/src/gst-plugins-bad/gst-plugins-bad-${PV}.tar.xz" +SRC_URI_append = " git://github.com/renesas-rcar/gst-plugins-bad.git;branch=RCAR-GEN3/1.6.3" + +SRCREV = "e336b2dacf29a155dc8f6896ee0f3a89d87d805e" + +DEPENDS += "weston wayland-native" + +S = "${WORKDIR}/git" + +# submodule is extracted before do_populate_lic +addtask do_init_submodule after do_unpack before do_patch + +do_init_submodule() { + export http_proxy=${http_proxy} + export https_proxy=${https_proxy} + export HTTP_PROXY=${HTTP_PROXY} + export HTTPS_PROXY=${HTTPS_PROXY} + cd ${S} + git submodule init + git submodule update +} + +do_configure_prepend() { + cd ${S} + ./autogen.sh --noconfigure + cd ${B} +} + +RDEPENDS_${PN} = "libwayland-egl" diff --git a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base_1.6.3.bbappend b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base_1.6.3.bbappend new file mode 100644 index 0000000..1912ac1 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-base_1.6.3.bbappend @@ -0,0 +1 @@ +PACKAGECONFIG_remove = "ivorbis" diff --git a/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-good_1.6.3.bbappend b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-good_1.6.3.bbappend new file mode 100644 index 0000000..1d353ec --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/gstreamer/gstreamer1.0-plugins-good_1.6.3.bbappend @@ -0,0 +1,32 @@ +SRC_URI_remove = "http://gstreamer.freedesktop.org/src/gst-plugins-good/gst-plugins-good-${PV}.tar.xz" +SRC_URI_append = " git://github.com/renesas-rcar/gst-plugins-good.git;branch=RCAR-GEN3/1.6.3" + +SRCREV = "00beed48b36e0b7f2c92199806cc4cb9e0990166" + +DEPENDS += "mmngrbuf-user-module" + +S = "${WORKDIR}/git" + +EXTRA_OECONF_append = " \ + --enable-cont-frame-capture \ + --enable-ignore-fps-of-video-standard \ +" + +# submodule is extracted before do_populate_lic +addtask do_init_submodule after do_unpack before do_patch + +do_init_submodule() { + export http_proxy=${http_proxy} + export https_proxy=${https_proxy} + export HTTP_PROXY=${HTTP_PROXY} + export HTTPS_PROXY=${HTTPS_PROXY} + cd ${S} + git submodule init + git submodule update +} + +do_configure_prepend() { + cd ${S} + ./autogen.sh --noconfigure + cd ${B} +} diff --git a/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngr-user-module.bb b/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngr-user-module.bb new file mode 100644 index 0000000..ac4cf30 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngr-user-module.bb @@ -0,0 +1,25 @@ +DESCRIPTION = "Memory Manager User module for Renesas R-Car Gen3" +require mmngr_lib.inc +require include/rcar-gen3-path-common.inc + +DEPENDS = "kernel-module-mmngr" +PN = "mmngr-user-module" +PR = "r0" + +S = "${WORKDIR}/git/libmmngr/mmngr" + +EXTRA_OECONF = "${@bb.utils.contains("DISTRO_FEATURES", "mm-test", \ + " --enable-mmngr-test", "", d)}" + +exec_prefix = "/usr" +bindir = "${RENESAS_DATADIR}/bin" +includedir = "${RENESAS_DATADIR}/include" +CFLAGS += " -I${STAGING_DIR_HOST}${RENESAS_DATADIR}/include" + +do_install_append() { + if [ -f ${D}${RENESAS_DATADIR}/bin/mmtp ]; then + if [ X${WS} = "X32" ]; then + mv ${D}${RENESAS_DATADIR}/bin/mmtp ${D}${RENESAS_DATADIR}/bin/mmtp${WS} + fi + fi +} diff --git a/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngr_lib.inc b/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngr_lib.inc new file mode 100644 index 0000000..142ff2e --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngr_lib.inc @@ -0,0 +1,18 @@ +# Common path of MMNGR and MMNGRBUF module +LICENSE = "MIT" +LIC_FILES_CHKSUM = "\ + file://${WORKDIR}/git/COPYING.MIT;md5=30a99e0d36a3da1f5cf93c070ad7888a" + +MMNGR_LIB_URI = "git://github.com/renesas-rcar/mmngr_lib.git" + +SRC_URI = "${MMNGR_LIB_URI};branch=rcar_gen3" +SRCREV = "8d2c068eecb41668bee086fc704ed37c2eb1df67" + +# Get Wordsize of test app and change their names later to avoid override +WS_aarch64 = "" +WS_virtclass-multilib-lib32 = "32" + +# These modules are machine specific. +PACKAGE_ARCH = "${MACHINE_ARCH}" + +inherit autotools diff --git a/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngrbuf-user-module.bb b/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngrbuf-user-module.bb new file mode 100644 index 0000000..690169f --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/mmngr-module/mmngrbuf-user-module.bb @@ -0,0 +1,25 @@ +DESCRIPTION = "Memory Manager Buffer User module for Renesas R-Car Gen3" +require mmngr_lib.inc +require include/rcar-gen3-path-common.inc + +DEPENDS = "kernel-module-mmngrbuf" +PN = "mmngrbuf-user-module" +PR = "r0" + +S = "${WORKDIR}/git/libmmngr/mmngrbuf" + +EXTRA_OECONF = "${@bb.utils.contains("DISTRO_FEATURES", "mm-test", \ + " --enable-mmngrbuf-test", "", d)}" + +exec_prefix = "/usr" +bindir = "${RENESAS_DATADIR}/bin" +includedir = "${RENESAS_DATADIR}/include" +CFLAGS += " -I${STAGING_DIR_HOST}${RENESAS_DATADIR}/include" + +do_install_append() { + if [ -f ${D}${RENESAS_DATADIR}/bin/mmbuftp ]; then + if [ X${WS} = "X32" ]; then + mv ${D}${RENESAS_DATADIR}/bin/mmbuftp ${D}${RENESAS_DATADIR}/bin/mmbuftp${WS} + fi + fi +} diff --git a/meta-rcar-gen3/recipes-multimedia/omx-module/deltask-omx-user-module.inc b/meta-rcar-gen3/recipes-multimedia/omx-module/deltask-omx-user-module.inc new file mode 100644 index 0000000..6f3f847 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/omx-module/deltask-omx-user-module.inc @@ -0,0 +1,2 @@ +deltask do_configure +deltask do_compile diff --git a/meta-rcar-gen3/recipes-multimedia/omx-module/libalacdla-l.bb b/meta-rcar-gen3/recipes-multimedia/omx-module/libalacdla-l.bb new file mode 100644 index 0000000..f31792b --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/omx-module/libalacdla-l.bb @@ -0,0 +1,61 @@ +DESCRIPTION = "ALAC decoder library" +SECTION = "libs" +LICENSE = "Apache-2.0 & APSL-2.0" +LIC_FILES_CHKSUM = " \ + file://LICENSE;md5=5cf67868b9e038eccb149ec80809d9f5 \ + file://APPLE_LICENSE.txt;md5=b180a94f894d2a868d40ea43da2bbaba \ +" + +PACKAGE_ARCH = "${MACHINE_ARCH}" + +DEPENDS = " \ + kernel-module-mmngr mmngr-user-module \ + vspmif-user-module kernel-module-vspmif \ + kernel-module-vspm kernel-module-vsp2driver \ +" + +RDEPENDS_${PN} += "mmngr-user-module vspmif-user-module" + +SRC_URI = "git://github.com/renesas-rcar/alac_decoder.git;branch=master" +SRCREV = "5d7e5c91a932bedb36284591612bfbb3342cd672" + +S = "${WORKDIR}/git" +B = "${S}/build/linux_armyocto/lib" + +EXTRA_OEMAKE = "ARCH=${ARCH}" + +ARCH = "arm" +ARCH_aarch64 = "arm64" + +do_install() { + # Create directories + install -d ${D}/${libdir} + install -d ${D}/${includedir} + + # Install library + install -m 755 ${S}/build/linux_armyocto/libALACDLA_L.so.2.0 ${D}/${libdir}/ + + # Create symbolic link + cd ${D}/${libdir} + ln -s libALACDLA_L.so.2.0 libALACDLA_L.so.2 + ln -s libALACDLA_L.so.2 libALACDLA_L.so + + # Install shared header file + install -m 644 ${S}/lib/alacd_Lib.h ${D}/${includedir}/ +} + +FILES_${PN} += " \ + ${libdir}/libALACDLA_L.so.* \ + ${libdir}/libALACDLA_L.so \ +" + +FILES_${PN}-dev = "${includedir}/*.h" + +INSANE_SKIP_${PN} += "dev-so" + +# Skip debug strip of do_populate_sysroot() +INHIBIT_SYSROOT_STRIP = "1" + +# Skip debug split and strip of do_package() +INHIBIT_PACKAGE_DEBUG_SPLIT = "1" +INHIBIT_PACKAGE_STRIP = "1" diff --git a/meta-rcar-gen3/recipes-multimedia/omx-module/libflacdla-l.bb b/meta-rcar-gen3/recipes-multimedia/omx-module/libflacdla-l.bb new file mode 100644 index 0000000..453195e --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/omx-module/libflacdla-l.bb @@ -0,0 +1,50 @@ +DESCRIPTION = "FLAC decoder library" +SECTION = "libs" +LICENSE = "BSD" +LIC_FILES_CHKSUM = "file://COPYING.Xiph;md5=a2c4b71c0198682376d483eb5bcc9197" + +PACKAGE_ARCH = "${MACHINE_ARCH}" + +SRC_URI = "git://github.com/renesas-rcar/flac_decoder.git;branch=master" +SRCREV = "70c0a7ae7dc8cac2056adf5eb175e3c54f892c27" + +S = "${WORKDIR}/git" +B = "${S}/build/linux_armyocto/lib" + +EXTRA_OEMAKE = "ARCH=${ARCH}" + +ARCH = "arm" +ARCH_aarch64 = "arm64" + +do_install() { + # Create directories + install -d ${D}/${libdir} + install -d ${D}/${includedir} + + # Install library + install -m 755 ${S}/build/linux_armyocto/libFLACDLA_L.so.2.0 ${D}/${libdir}/ + + # Create symbolic link + cd ${D}/${libdir} + ln -s libFLACDLA_L.so.2.0 libFLACDLA_L.so.2 + ln -s libFLACDLA_L.so.2 libFLACDLA_L.so + + # Install shared header file + install -m 644 ${S}/lib/flacd_Lib.h ${D}/${includedir}/ +} + +FILES_${PN} += " \ + ${libdir}/libFLACDLA_L.so.* \ + ${libdir}/libFLACDLA_L.so \ +" + +FILES_${PN}-dev = "${includedir}/*.h" + +INSANE_SKIP_${PN} += "dev-so" + +# Skip debug strip of do_populate_sysroot() +INHIBIT_SYSROOT_STRIP = "1" + +# Skip debug split and strip of do_package() +INHIBIT_PACKAGE_DEBUG_SPLIT = "1" +INHIBIT_PACKAGE_STRIP = "1" diff --git a/meta-rcar-gen3/recipes-multimedia/omx-module/omx-user-module.bb b/meta-rcar-gen3/recipes-multimedia/omx-module/omx-user-module.bb new file mode 100644 index 0000000..d0da0f7 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/omx-module/omx-user-module.bb @@ -0,0 +1,450 @@ +DESCRIPTION = "OMX Media Components R-Car Gen3" +LICENSE = "CLOSED" +require include/omx-control.inc +require include/rcar-gen3-modules-common.inc + +DEPENDS = " \ + kernel-module-mmngr mmngr-user-module \ + vspmif-user-module kernel-module-vspmif \ + kernel-module-vspm kernel-module-vsp2driver \ +" + +# Task Control. Compile is not performed when not installing OMX Video and Audio Libs. +# Note) dummy-omx-user-module.inc does not exist. +INCLUDE_FILE = '${@base_conditional("USE_OMX_COMMON", "1", "dummy", "deltask", d )}' +include ${INCLUDE_FILE}-omx-user-module.inc + +DEPENDS += '${@base_conditional("USE_VIDEO_OMX", "1", "kernel-module-uvcs-drv", "", d )}' + +inherit autotools + +includedir = "${RENESAS_DATADIR}/include" +CFLAGS += " -I${STAGING_DIR_HOST}${RENESAS_DATADIR}/include" +PACKAGE_ARCH = "${MACHINE_ARCH}" + +OMX_EVA_PREFIX = '${@base_conditional("USE_OMX_EVA_PKG", "1", "EVA", "", d )}' + +# SRC file name +SRC_URI_OMX = '${@base_conditional("USE_OMX_COMMON", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XCMCTL30SL40C.tar.bz2;unpack=0", "", d )}' +SRC_URI_VCMND = '${@base_conditional("USE_VIDEO_DEC", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XVCMND30SL40C.tar.bz2;unpack=0", "", d )}' +SRC_URI_VCMNE = '${@base_conditional("USE_VIDEO_ENC", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XVCMNE30SL40C.tar.bz2;unpack=0", "", d )}' +SRC_URI_H263D = '${@base_conditional("USE_H263D_OMX", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XV263D30SL40C.tar.bz2", "", d )}' +SRC_URI_H264D = '${@base_conditional("USE_H264D_OMX", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XV264D30SL40C.tar.bz2", "", d )}' +SRC_URI_H264E = '${@base_conditional("USE_H264E_OMX", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XV264E30SL40C.tar.bz2", "", d )}' +SRC_URI_H265D = '${@base_conditional("USE_H265D_OMX", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XV265D30SL40C.tar.bz2", "", d )}' +SRC_URI_MPEG2D = '${@base_conditional("USE_MPEG2D_OMX", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XVM2VD30SL40C.tar.bz2", "", d )}' +SRC_URI_MPEG4D = '${@base_conditional("USE_MPEG4D_OMX", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XVM4VD30SL40C.tar.bz2", "", d )}' +SRC_URI_VC1D = '${@base_conditional("USE_VC1D_OMX", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XVVC1D30SL40C.tar.bz2", "", d )}' +SRC_URI_DIVXD = '${@base_conditional("USE_DIVXD_OMX", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XVDVXD30SL40C.tar.bz2", "", d )}' +SRC_URI_RVD = '${@base_conditional("USE_RVD_OMX", "1", "file://${OMX_EVA_PREFIX}RTM0AC0000XVRLVD30SL40C.tar.bz2", "", d )}' +SRC_URI_ACMND = '${@base_conditional("USE_AUDIO_OMX", "1", "file://RTM0AC0000XACMND30SL40C.tar.gz", "", d )}' +SRC_URI_AACLC = '${@base_conditional("USE_AACLCD_OMX", "1", "file://RTM0AC0000XAAACD30SL40C.tar.gz", "", d )}' +SRC_URI_AACPV2 = '${@base_conditional("USE_AACPV2D_OMX", "1", "file://RTM0AC0000XAAAPD30SL40C.tar.gz", "", d )}' +SRC_URI_MP3 = '${@base_conditional("USE_MP3D_OMX", "1", "file://RTM0AC0000XAMP3D30SL40C.tar.gz", "", d )}' +SRC_URI_AACLCE = '${@base_conditional("USE_AACLCE_OMX", "1", "file://RTM0AC0000XAAACE30SL40C.tar.gz", "", d )}' +SRC_URI_WMA = '${@base_conditional("USE_WMAD_OMX", "1", "file://RTM0AC0000XAWMAD30SL40C.tar.gz", "", d )}' +SRC_URI_ALACD = '${@base_conditional("USE_ALACD_OMX", "1", "file://RTM0AC0000XAALAD30SL40C.tar.gz", "", d )}' +SRC_URI_FLACD = '${@base_conditional("USE_FLACD_OMX", "1", "file://RTM0AC0000XAFLAD30SL40C.tar.gz", "", d )}' +SRC_URI_DDD = '${@base_conditional("USE_DDD_OMX", "1", "file://RTM0AC0000XADD5D30SL40C.tar.gz", "", d )}' +SRC_URI_AACMZ = '${@base_conditional("USE_AACLC_MDW", "1", "file://RTM0AC0000ADAACMZ1SL40C.tar.gz", "", d )}' +SRC_URI_AACPV2MZ = '${@base_conditional("USE_AACPV2_MDW", "1", "file://RTM0AC0000ADAAPMZ1SL40C.tar.gz", "", d )}' +SRC_URI_MP3MZ = '${@base_conditional("USE_MP3_MDW", "1", "file://RTM0AC0000ADMP3MZ1SL40C.tar.gz", "", d )}' +SRC_URI_WMAMZ = '${@base_conditional("USE_WMA_MDW", "1", "file://RTM0AC0000ADWMAMZ1SL40C.tar.gz", "", d )}' +SRC_URI_DDMZ = '${@base_conditional("USE_DD_MDW", "1", "file://RTM0AC0000ADDD5MZ1SL40C.tar.gz", "", d )}' +SRC_URI_AEAACMZ = '${@base_conditional("USE_AACLCE_MDW", "1", "file://RTM0AC0000AEAACMZ1SL40C.tar.gz", "", d )}' + +SRC_URI = " \ + ${SRC_URI_OMX} \ + ${SRC_URI_VCMND} \ + ${SRC_URI_VCMNE} \ + ${SRC_URI_H263D} \ + ${SRC_URI_H264D} \ + ${SRC_URI_H264E} \ + ${SRC_URI_H265D} \ + ${SRC_URI_MPEG2D} \ + ${SRC_URI_MPEG4D} \ + ${SRC_URI_VC1D} \ + ${SRC_URI_DIVXD} \ + ${SRC_URI_RVD} \ + ${SRC_URI_ACMND} \ + ${SRC_URI_AACLC} \ + ${SRC_URI_AACPV2} \ + ${SRC_URI_MP3} \ + ${SRC_URI_WMA} \ + ${SRC_URI_ALACD} \ + ${SRC_URI_FLACD} \ + ${SRC_URI_DDD} \ + ${SRC_URI_AACLCE} \ + ${SRC_URI_AACMZ} \ + ${SRC_URI_AACPV2MZ} \ + ${SRC_URI_MP3MZ} \ + ${SRC_URI_WMAMZ} \ + ${SRC_URI_DDMZ} \ + ${SRC_URI_AEAACMZ} \ +" + +# SRC directory name +OMX_COMMON_SRC = '${@base_conditional("USE_OMX_COMMON", "1", "${OMX_EVA_PREFIX}RTM0AC0000XCMCTL30SL40C", "", d )}' +OMX_VIDEO_DEC_COMMON_SRC = '${@base_conditional("USE_VIDEO_DEC", "1", "${OMX_EVA_PREFIX}RTM0AC0000XVCMND30SL40C", "", d )}' +OMX_VIDEO_ENC_COMMON_SRC = '${@base_conditional("USE_VIDEO_ENC", "1", "${OMX_EVA_PREFIX}RTM0AC0000XVCMNE30SL40C", "", d )}' + +OMX_H263_DEC_SRC = '${@base_conditional("USE_H263D_OMX", "1", "${OMX_EVA_PREFIX}RTM0AC0000XV263D30SL40C", "", d )}' +OMX_H264_DEC_SRC = '${@base_conditional("USE_H264D_OMX", "1", "${OMX_EVA_PREFIX}RTM0AC0000XV264D30SL40C", "", d )}' +OMX_H264_ENC_SRC = '${@base_conditional("USE_H264E_OMX", "1", "${OMX_EVA_PREFIX}RTM0AC0000XV264E30SL40C", "", d )}' +OMX_H265_DEC_SRC = '${@base_conditional("USE_H265D_OMX", "1", "${OMX_EVA_PREFIX}RTM0AC0000XV265D30SL40C", "", d )}' +OMX_MPEG2_DEC_SRC = '${@base_conditional("USE_MPEG2D_OMX", "1", "${OMX_EVA_PREFIX}RTM0AC0000XVM2VD30SL40C", "", d )}' +OMX_MPEG4_DEC_SRC = '${@base_conditional("USE_MPEG4D_OMX", "1", "${OMX_EVA_PREFIX}RTM0AC0000XVM4VD30SL40C", "", d )}' +OMX_VC1_DEC_SRC = '${@base_conditional("USE_VC1D_OMX", "1", "${OMX_EVA_PREFIX}RTM0AC0000XVVC1D30SL40C", "", d )}' +OMX_DIVX_DEC_SRC = '${@base_conditional("USE_DIVXD_OMX", "1", "${OMX_EVA_PREFIX}RTM0AC0000XVDVXD30SL40C", "", d )}' +OMX_RV_DEC_SRC = '${@base_conditional("USE_RVD_OMX", "1", "${OMX_EVA_PREFIX}RTM0AC0000XVRLVD30SL40C", "", d )}' + +OMX_VIDEO_SRC_LIST = " \ + ${OMX_COMMON_SRC} \ + ${OMX_VIDEO_DEC_COMMON_SRC} \ + ${OMX_VIDEO_ENC_COMMON_SRC} \ + ${OMX_H263_DEC_SRC} \ + ${OMX_H264_DEC_SRC} \ + ${OMX_H264_ENC_SRC} \ + ${OMX_H265_DEC_SRC} \ + ${OMX_MPEG2_DEC_SRC} \ + ${OMX_MPEG4_DEC_SRC} \ + ${OMX_VC1_DEC_SRC} \ + ${OMX_DIVX_DEC_SRC} \ + ${OMX_RV_DEC_SRC} \ +" + +AAC_MIDDLEWARE_SRC = "RTM0AC0000ADAACMZ1SL40C" +AACPV2_MIDDLEWARE_SRC = "RTM0AC0000ADAAPMZ1SL40C" +MP3_MIDDLEWARE_SRC = "RTM0AC0000ADMP3MZ1SL40C" +WMA_MIDDLEWARE_SRC = "RTM0AC0000ADWMAMZ1SL40C" +DD_MIDDLEWARE_SRC = "RTM0AC0000ADDD5MZ1SL40C" +AEAAC_MIDDLEWARE_SRC = "RTM0AC0000AEAACMZ1SL40C" + +OMX_AUDIO_COMMON_SRC = '${@base_conditional("USE_AUDIO_OMX", "1", "RTM0AC0000XACMND30SL40C", "", d )}' +OMX_AACLC_DEC_SRC = '${@base_conditional("USE_AACLCD_OMX", "1", "RTM0AC0000XAAACD30SL40C", "", d )}' +OMX_AACPV2_DEC_SRC = '${@base_conditional("USE_AACPV2D_OMX", "1", "RTM0AC0000XAAAPD30SL40C", "", d )}' +OMX_MP3_DEC_SRC = '${@base_conditional("USE_MP3D_OMX", "1", "RTM0AC0000XAMP3D30SL40C", "", d )}' +OMX_WMA_DEC_SRC = '${@base_conditional("USE_WMAD_OMX", "1", "RTM0AC0000XAWMAD30SL40C", "", d )}' +OMX_ALAC_DEC_SRC = '${@base_conditional("USE_ALACD_OMX", "1", "RTM0AC0000XAALAD30SL40C", "", d )}' +OMX_FLAC_DEC_SRC = '${@base_conditional("USE_FLACD_OMX", "1", "RTM0AC0000XAFLAD30SL40C", "", d )}' +OMX_DD_DEC_SRC = '${@base_conditional("USE_DDD_OMX", "1", "RTM0AC0000XADD5D30SL40C", "", d )}' +OMX_AACLC_ENC_SRC = '${@base_conditional("USE_AACLCE_OMX", "1", "RTM0AC0000XAAACE30SL40C", "", d )}' + +OMX_AUDIO_SRC_LIST = " \ + ${OMX_AUDIO_COMMON_SRC} \ + ${OMX_AACLC_DEC_SRC} \ + ${OMX_AACPV2_DEC_SRC} \ + ${OMX_MP3_DEC_SRC} \ + ${OMX_WMA_DEC_SRC} \ + ${OMX_ALAC_DEC_SRC} \ + ${OMX_FLAC_DEC_SRC} \ + ${OMX_DD_DEC_SRC} \ + ${OMX_AACLC_ENC_SRC} \ +" + +S = "${WORKDIR}/omx/" + +# Create ${S} directory +do_unpack_prepend() { + os.system("install -d ${S}") +} + +do_unpack_append() { + bb.build.exec_func('setup_build_tree', d) +} + +setup_build_tree() { + for omxmc in ${OMX_COMMON_SRC} ${OMX_VIDEO_DEC_COMMON_SRC} ${OMX_VIDEO_ENC_COMMON_SRC} + do + tar xf ${WORKDIR}/${omxmc}.tar.bz2 -C ${WORKDIR} + tar xf ${WORKDIR}/${omxmc}.tar.bz2 -C ${S} ${omxmc}/src --strip=2 + tar xf ${WORKDIR}/${omxmc}.tar.bz2 -C ${S} ${omxmc}/include --strip=1 + done +} + +B = "${S}" + +EXTRA_OECONF = "OMXR_DEFAULT_CONFIG_FILE_NAME=${sysconfdir}/omxr/omxr_config_base.txt" + +do_configure() { + export uvcsdrv_dir="${INCSHARED}" + chmod u+x autogen.sh + ./autogen.sh + oe_runconf +} + +do_install_omx_video() { + cd ${D}/${libdir} + for omxmc in ${OMX_VIDEO_SRC_LIST} + do + src="${WORKDIR}/${omxmc}" + install -m 755 ${src}/${baselib}/lib*.so.* ${D}/${libdir} + install -m 644 ${src}/include/*.h ${D}/${includedir} + install -m 644 ${src}/config/*.txt ${D}/${sysconfdir}/omxr + done + + if [ "X${USE_OMX_COMMON}" = "X1" ] ; then + ln -s libomxr_core.so.3.0.0 libomxr_core.so.3 + ln -s libomxr_core.so.3 libomxr_core.so + + ln -s libomxr_mc_cmn.so.3.0.0 libomxr_mc_cmn.so.3 + ln -s libomxr_mc_cmn.so.3 libomxr_mc_cmn.so + fi + + if [ "X${USE_VIDEO_OMX}" = "X1" ] ; then + ln -s libomxr_mc_vcmn.so.3.0.0 libomxr_mc_vcmn.so.3 + ln -s libomxr_mc_vcmn.so.3 libomxr_mc_vcmn.so + fi + + if [ "X${USE_VIDEO_DEC}" = "X1" ] ; then + ln -s libomxr_mc_vdcmn.so.3.0.0 libomxr_mc_vdcmn.so.3 + ln -s libomxr_mc_vdcmn.so.3 libomxr_mc_vdcmn.so + + ln -s libuvcs_dec.so.3.0.0 libuvcs_dec.so.3 + ln -s libuvcs_dec.so.3 libuvcs_dec.so + fi + + if [ "X${USE_VIDEO_ENC}" = "X1" ] ; then + ln -s libomxr_mc_vecmn.so.3.0.0 libomxr_mc_vecmn.so.3 + ln -s libomxr_mc_vecmn.so.3 libomxr_mc_vecmn.so + + ln -s libuvcs_enc.so.3.0.0 libuvcs_enc.so.3 + ln -s libuvcs_enc.so.3 libuvcs_enc.so + fi + + if [ "X${USE_H263D_OMX}" = "X1" ]; then + ln -s libomxr_mc_h263d.so.3.0.0 libomxr_mc_h263d.so.3 + ln -s libomxr_mc_h263d.so.3 libomxr_mc_h263d.so + + ln -s libuvcs_hv3d.so.3.0.0 libuvcs_hv3d.so.3 + ln -s libuvcs_hv3d.so.3 libuvcs_hv3d.so + fi + + if [ "X${USE_H264D_OMX}" = "X1" ]; then + ln -s libomxr_mc_h264d.so.3.0.0 libomxr_mc_h264d.so.3 + ln -s libomxr_mc_h264d.so.3 libomxr_mc_h264d.so + + ln -s libuvcs_avcd.so.3.0.0 libuvcs_avcd.so.3 + ln -s libuvcs_avcd.so.3 libuvcs_avcd.so + fi + + if [ "X${USE_H264E_OMX}" = "X1" ]; then + ln -s libomxr_mc_h264e.so.3.0.0 libomxr_mc_h264e.so.3 + ln -s libomxr_mc_h264e.so.3 libomxr_mc_h264e.so + + ln -s libuvcs_avce.so.3.0.0 libuvcs_avce.so.3 + ln -s libuvcs_avce.so.3 libuvcs_avce.so + fi + + if [ "X${USE_H265D_OMX}" = "X1" ]; then + ln -s libomxr_mc_hevd.so.3.0.0 libomxr_mc_hevd.so.3 + ln -s libomxr_mc_hevd.so.3 libomxr_mc_hevd.so + + ln -s libuvcs_hevd.so.3.0.0 libuvcs_hevd.so.3 + ln -s libuvcs_hevd.so.3 libuvcs_hevd.so + fi + + if [ "X${USE_MPEG2D_OMX}" = "X1" ]; then + ln -s libomxr_mc_m2vd.so.3.0.0 libomxr_mc_m2vd.so.3 + ln -s libomxr_mc_m2vd.so.3 libomxr_mc_m2vd.so + + ln -s libuvcs_m2vd.so.3.0.0 libuvcs_m2vd.so.3 + ln -s libuvcs_m2vd.so.3 libuvcs_m2vd.so + fi + + if [ "X${USE_MPEG4D_OMX}" = "X1" ]; then + ln -s libomxr_mc_m4vd.so.3.0.0 libomxr_mc_m4vd.so.3 + ln -s libomxr_mc_m4vd.so.3 libomxr_mc_m4vd.so + + ln -s libuvcs_m4vd.so.3.0.0 libuvcs_m4vd.so.3 + ln -s libuvcs_m4vd.so.3 libuvcs_m4vd.so + fi + + if [ "X${USE_VC1D_OMX}" = "X1" ]; then + ln -s libomxr_mc_vc1d.so.3.0.0 libomxr_mc_vc1d.so.3 + ln -s libomxr_mc_vc1d.so.3 libomxr_mc_vc1d.so + + ln -s libuvcs_vc1d.so.3.0.0 libuvcs_vc1d.so.3 + ln -s libuvcs_vc1d.so.3 libuvcs_vc1d.so + fi + + if [ "X${USE_DIVXD_OMX}" = "X1" ]; then + ln -s libomxr_mc_divxd.so.3.0.0 libomxr_mc_divxd.so.3 + ln -s libomxr_mc_divxd.so.3 libomxr_mc_divxd.so + + ln -s libuvcs_dvxd.so.3.0.0 libuvcs_dvxd.so.3 + ln -s libuvcs_dvxd.so.3 libuvcs_dvxd.so + fi + + if [ "X${USE_RVD_OMX}" = "X1" ]; then + ln -s libomxr_mc_rlvd.so.3.0.0 libomxr_mc_rlvd.so.3 + ln -s libomxr_mc_rlvd.so.3 libomxr_mc_rlvd.so + + ln -s libuvcs_rlvd.so.3.0.0 libuvcs_rlvd.so.3 + ln -s libuvcs_rlvd.so.3 libuvcs_rlvd.so + fi +} + +do_install_audio_middleware() { + cd ${D}/${libdir} + + if [ "X${USE_AACLC_MDW}" = "X1" ]; then + install -m 755 ${WORKDIR}/${AAC_MIDDLEWARE_SRC}/${baselib}/libAACDLA_L.so.3.0 \ + ${D}/${libdir} + install -m 644 ${WORKDIR}/${AAC_MIDDLEWARE_SRC}/include/*.h ${D}/${includedir} + + ln -s libAACDLA_L.so.3.0 libAACDLA_L.so.3 + ln -s libAACDLA_L.so.3 libAACDLA_L.so + fi + + if [ "X${USE_AACPV2_MDW}" = "X1" ]; then + install -m 755 ${WORKDIR}/${AACPV2_MIDDLEWARE_SRC}/${baselib}/libRSACPDLA_L.so.2.0 \ + ${D}/${libdir} + install -m 644 ${WORKDIR}/${AACPV2_MIDDLEWARE_SRC}/include/*.h ${D}/${includedir} + + ln -s libRSACPDLA_L.so.2.0 libRSACPDLA_L.so.2 + ln -s libRSACPDLA_L.so.2 libRSACPDLA_L.so + fi + + if [ "X${USE_MP3_MDW}" = "X1" ]; then + install -m 755 ${WORKDIR}/${MP3_MIDDLEWARE_SRC}/${baselib}/libMP3DLA_L.so.2.0 \ + ${D}/${libdir} + install -m 644 ${WORKDIR}/${MP3_MIDDLEWARE_SRC}/include/*.h ${D}/${includedir} + + ln -s libMP3DLA_L.so.2.0 libMP3DLA_L.so.2 + ln -s libMP3DLA_L.so.2 libMP3DLA_L.so + fi + + if [ "X${USE_WMA_MDW}" = "X1" ]; then + install -m 755 ${WORKDIR}/${WMA_MIDDLEWARE_SRC}/${baselib}/libWMASTDLA_L.so.2.0 \ + ${D}/${libdir} + install -m 644 ${WORKDIR}/${WMA_MIDDLEWARE_SRC}/include/*.h ${D}/${includedir} + + ln -s libWMASTDLA_L.so.2.0 libWMASTDLA_L.so.2 + ln -s libWMASTDLA_L.so.2 libWMASTDLA_L.so + fi + + if [ "X${USE_DD_MDW}" = "X1" ]; then + install -m 755 ${WORKDIR}/${DD_MIDDLEWARE_SRC}/${baselib}/libRSDACDLA_L.so.2.0 \ + ${D}/${libdir} + install -m 644 ${WORKDIR}/${DD_MIDDLEWARE_SRC}/include/*.h ${D}/${includedir} + + ln -s libRSDACDLA_L.so.2.0 libRSDACDLA_L.so.2 + ln -s libRSDACDLA_L.so.2 libRSDACDLA_L.so + fi + + if [ "X${USE_AACLCE_MDW}" = "X1" ]; then + install -m 755 ${WORKDIR}/${AEAAC_MIDDLEWARE_SRC}/${baselib}/libRSAACELA_L.so.3.0 \ + ${D}/${libdir} + install -m 644 ${WORKDIR}/${AEAAC_MIDDLEWARE_SRC}/include/*.h ${D}/${includedir} + + ln -s libRSAACELA_L.so.3.0 libRSAACELA_L.so.3 + ln -s libRSAACELA_L.so.3 libRSAACELA_L.so + fi +} + +do_install_omx_audio() { + cd ${D}/${libdir} + for omxmc in ${OMX_AUDIO_SRC_LIST} + do + src="${WORKDIR}/${omxmc}/" + install -m 755 ${src}/${baselib}/lib*.so.* ${D}/${libdir} + if [ -d ${src}/include ]; then + install -m 644 ${src}/include/*.h ${D}/${includedir} + fi + install -m 644 ${src}/config/*.txt ${D}/${sysconfdir}/omxr + done + + if [ "X${USE_AUDIO_OMX}" = "X1" ]; then + ln -s libomxr_mc_acmn.so.3.0.0 libomxr_mc_acmn.so.3 + ln -s libomxr_mc_acmn.so.3 libomxr_mc_acmn.so + fi + + if [ "X${USE_AACLCD_OMX}" = "X1" ]; then + ln -s libomxr_mc_aacd.so.3.0.0 libomxr_mc_aacd.so.3 + ln -s libomxr_mc_aacd.so.3 libomxr_mc_aacd.so + fi + + if [ "X${USE_AACPV2D_OMX}" = "X1" ]; then + ln -s libomxr_mc_aapd.so.3.0.0 libomxr_mc_aapd.so.3 + ln -s libomxr_mc_aapd.so.3 libomxr_mc_aapd.so + fi + + if [ "X${USE_MP3D_OMX}" = "X1" ]; then + ln -s libomxr_mc_mp3d.so.3.0.0 libomxr_mc_mp3d.so.3 + ln -s libomxr_mc_mp3d.so.3 libomxr_mc_mp3d.so + fi + + if [ "X${USE_WMAD_OMX}" = "X1" ]; then + ln -s libomxr_mc_wmad.so.3.0.0 libomxr_mc_wmad.so.3 + ln -s libomxr_mc_wmad.so.3 libomxr_mc_wmad.so + fi + + if [ "X${USE_ALACD_OMX}" = "X1" ]; then + ln -s libomxr_mc_alacd.so.3.0.0 libomxr_mc_alacd.so.3 + ln -s libomxr_mc_alacd.so.3 libomxr_mc_alacd.so + fi + + if [ "X${USE_FLACD_OMX}" = "X1" ]; then + ln -s libomxr_mc_flacd.so.3.0.0 libomxr_mc_flacd.so.3 + ln -s libomxr_mc_flacd.so.3 libomxr_mc_flacd.so + fi + + if [ "X${USE_AACLCE_OMX}" = "X1" ]; then + ln -s libomxr_mc_aace.so.3.0.0 libomxr_mc_aace.so.3 + ln -s libomxr_mc_aace.so.3 libomxr_mc_aace.so + fi + + if [ "X${USE_DDD_OMX}" = "X1" ]; then + ln -s libomxr_mc_ddd.so.3.0.0 libomxr_mc_ddd.so.3 + ln -s libomxr_mc_ddd.so.3 libomxr_mc_ddd.so + fi +} + +do_install () { + if [ "X${USE_OMX_COMMON}" = "X1" ]; then + oe_runmake 'DESTDIR=${D}' install + # Info dir listing isn't interesting at this point so remove it if it exists. + if [ -e "${D}/${infodir}/dir" ]; then + rm -f ${D}/${infodir}/dir + fi + fi +} + +do_install_append() { + # Create destination directory + install -d ${D}/${libdir} + install -d ${D}/${includedir} + if [ "X${USE_OMX_COMMON}" = "X1" ]; then + install -d ${D}/${sysconfdir}/omxr + fi + + # Copy omx video library + do_install_omx_video + # Copy audio middleware library + do_install_audio_middleware + # Copy omx audio library + do_install_omx_audio +} + +INSANE_SKIP_${PN} = "dev-so" + +FILES_${PN} += " \ + ${libdir}/*.so \ +" + +FILES_${PN}-dev = " \ + ${includedir} \ + ${libdir}/*.la \ +" + +RDEPENDS_${PN} += "mmngr-user-module vspmif-user-module" +RDEPENDS_${PN} += '${@base_conditional("USE_ALACD_OMX", "1", "libalacdla-l", "", d )}' +RDEPENDS_${PN} += '${@base_conditional("USE_FLACD_OMX", "1", "libflacdla-l", "", d )}' + +# Skip debug strip of do_populate_sysroot() +INHIBIT_SYSROOT_STRIP = "1" + +# Skip debug split and strip of do_package() +INHIBIT_PACKAGE_DEBUG_SPLIT = "1" +INHIBIT_PACKAGE_STRIP = "1" diff --git a/meta-rcar-gen3/recipes-multimedia/open-avb/open-avb_git.bb b/meta-rcar-gen3/recipes-multimedia/open-avb/open-avb_git.bb new file mode 100644 index 0000000..eeb3aa9 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/open-avb/open-avb_git.bb @@ -0,0 +1,66 @@ +DESCRIPTION = "Open AVB - an AVnu sponsored repository for Audio/Video Bridging technology" +HOMEPAGE = "https://github.com/AVnu/Open-AVB" +LICENSE = "BSD & MIT & GPLv2 & LGPLv2" +LIC_FILES_CHKSUM = " \ + file://daemons/LICENSE;md5=81ccd62d4bc28bafc5e1a2576536b927 \ + file://kmod/igb/COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \ + file://kmod/igb/LICENSE;md5=e2c0cd0820d168b0b26e19f13df4dc56 \ + file://lib/igb/LICENSE;md5=9bc783ca40be823a8b237df5eed80fc4 \ + file://lib/avtp_pipeline/LICENSE;md5=8f7b370a91d698ed80d2d20e8e01fbb6 \ + file://examples/LICENSE;md5=81ccd62d4bc28bafc5e1a2576536b927 \ + file://examples/gstreamer-avb-plugins/COPYING.LIB;md5=55ca817ccb7d5b5b66355690e9abc605 \ + file://examples/gstreamer-avb-plugins/COPYING.MIT;md5=bba6cdb9c2b03c849ed4975ed9ed90dc \ +" + +DEPENDS = "libpcap" + +PV = "1.1+git${SRCPV}" + +SRCREV = "bfa7f9d0c5c8ffe1c0248c6415b3f94e8b7f10c5" +SRC_URI = "git://github.com/AVnu/Open-AVB.git;branch=open-avb-next" + +S = "${WORKDIR}/git" + +EXTRA_OEMAKE = "'CC=${CC}' 'CXX=${CXX}'" + +do_compile() { + oe_runmake daemons_all +} + +do_install() { + install -d ${D}/${bindir} + install -m 755 daemons/maap/linux/maap_daemon ${D}/${bindir} + install -m 755 daemons/mrpd/mrpd daemons/mrpd/mrpctl ${D}/${bindir} + install -m 755 daemons/gptp/linux/build/obj/daemon_cl ${D}/${bindir} +} + +PACKAGES =+ " \ + ${PN}-gptp \ + ${PN}-mrpd \ + ${PN}-maap \ +" + +ALLOW_EMPTY_${PN} = "1" + +FILES_${PN}-gptp = " \ + ${bindir}/daemon_cl \ +" + +FILES_${PN}-mrpd = " \ + ${bindir}/mrpd \ + ${bindir}/mrpctl \ +" + +FILES_${PN}-maap = " \ + ${bindir}/maap_daemon \ +" + +RDEPENDS_${PN} = " \ + ${PN}-gptp \ + ${PN}-mrpd \ + ${PN}-maap \ +" + +RDEPENDS_${PN}-maap = " \ + libpcap \ +" diff --git a/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-gstreamer1.0-plugins.bb b/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-gstreamer1.0-plugins.bb new file mode 100644 index 0000000..4f76373 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-gstreamer1.0-plugins.bb @@ -0,0 +1,85 @@ +SUMMARY = "GStreamer 1.0 package groups" +LICENSE = "MIT" + +require include/omx-control.inc + +DEPENDS = "gstreamer1.0 gstreamer1.0-plugins-base gstreamer1.0-plugins-good" +DEPENDS += "gstreamer1.0-plugins-bad" +DEPENDS += "gstreamer1.0-plugins-ugly" +DEPENDS += "${@base_conditional("USE_OMX_COMMON", "1", "gstreamer1.0-omx", "", d)}" + +LIC_FILES_CHKSUM = " \ + file://${COREBASE}/LICENSE;md5=4d92cd373abda3937c2bc47fbc49d690 \ + file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420" + +PR = "r0" + +inherit packagegroup + +PACKAGES = " \ + packagegroup-gstreamer1.0-plugins \ + packagegroup-gstreamer1.0-plugins-base \ + packagegroup-gstreamer1.0-plugins-audio \ + packagegroup-gstreamer1.0-plugins-video \ + ${@base_conditional("USE_OMX_COMMON", "1", "packagegroup-gstreamer1.0-omx", "", d)} \ + packagegroup-gstreamer1.0-plugins-debug \ +" + +RDEPENDS_packagegroup-gstreamer1.0-plugins = " \ + packagegroup-gstreamer1.0-plugins-base \ + packagegroup-gstreamer1.0-plugins-audio \ + packagegroup-gstreamer1.0-plugins-video \ + ${@base_conditional("USE_OMX_COMMON", "1", "packagegroup-gstreamer1.0-omx", "", d)} \ + packagegroup-gstreamer1.0-plugins-debug \ +" + +RDEPENDS_packagegroup-gstreamer1.0-plugins-base = " \ + gstreamer1.0-meta-base \ + gstreamer1.0-plugins-base-typefindfunctions \ + gstreamer1.0-plugins-good-id3demux \ + gstreamer1.0-plugins-good-autodetect \ + ${@base_conditional("USE_OMX_COMMON", "1", "gstreamer1.0-plugin-vspfilter", "", d)} \ +" + +RDEPENDS_packagegroup-gstreamer1.0-plugins-audio = " \ + gstreamer1.0-meta-audio \ + gstreamer1.0-plugins-good-audioparsers \ + gstreamer1.0-plugins-base-audiotestsrc \ + gstreamer1.0-plugins-base-audioconvert \ + gstreamer1.0-plugins-base-audioresample \ + gstreamer1.0-plugins-base-alsa \ + gstreamer1.0-plugins-base-ogg \ + gstreamer1.0-plugins-base-vorbis \ +" + +RDEPENDS_packagegroup-gstreamer1.0-plugins-video = " \ + gstreamer1.0-meta-video \ + gstreamer1.0-plugins-base-videotestsrc \ + gstreamer1.0-plugins-base-videoconvert \ + gstreamer1.0-plugins-base-playback \ + gstreamer1.0-plugins-base-videoscale \ + gstreamer1.0-plugins-base-videorate \ + gstreamer1.0-plugins-good-matroska \ + gstreamer1.0-plugins-good-isomp4 \ + gstreamer1.0-plugins-good-avi \ + gstreamer1.0-plugins-good-videofilter \ + gstreamer1.0-plugins-good-videomixer \ + gstreamer1.0-plugins-good-videocrop \ + gstreamer1.0-plugins-good-video4linux2 \ + gstreamer1.0-plugins-good-jpeg \ + ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', \ + 'gstreamer1.0-plugins-bad-waylandsink', '', d)} \ + gstreamer1.0-plugins-bad-videoparsersbad \ + gstreamer1.0-plugins-bad-mpegtsdemux \ + gstreamer1.0-plugins-bad-jpegformat \ + gstreamer1.0-plugins-ugly-asf \ + gstreamer1.0-libav \ +" + +RDEPENDS_packagegroup-gstreamer1.0-omx = " \ + ${@base_conditional("USE_OMX_COMMON", "1", "gstreamer1.0-omx", "", d)} \ +" + +RDEPENDS_packagegroup-gstreamer1.0-plugins-debug = " \ + gstreamer1.0-meta-debug \ +" diff --git a/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-multimedia-kernel.bb b/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-multimedia-kernel.bb new file mode 100644 index 0000000..8d62972 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-multimedia-kernel.bb @@ -0,0 +1,31 @@ +SUMMARY = "Multimedia kernel modules package groups" +LICENSE = "GPLv2 & MIT" + +require include/omx-control.inc + +DEPENDS = "kernel-module-mmngr kernel-module-mmngrbuf \ + kernel-module-vspm kernel-module-vspmif \ + kernel-module-vsp2driver \ +" + +DEPENDS += '${@base_conditional("USE_VIDEO_OMX", "1", "kernel-module-uvcs-drv", "", d )}' + +PR = "r0" + +inherit packagegroup + +PACKAGES = " \ + packagegroup-multimedia-kernel-modules \ +" + +RDEPENDS_packagegroup-multimedia-kernel-modules = " \ + kernel-module-mmngr \ + kernel-module-mmngrbuf \ + kernel-module-vspm \ + kernel-module-vspmif \ + kernel-module-vsp2driver \ +" + +RDEPENDS_packagegroup-multimedia-kernel-modules += " \ + ${@base_conditional("USE_VIDEO_OMX", "1", "kernel-module-uvcs-drv", "", d )} \ +" diff --git a/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-multimedia-libs.bb b/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-multimedia-libs.bb new file mode 100644 index 0000000..323f6ae --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/packagegroups/packagegroup-multimedia-libs.bb @@ -0,0 +1,20 @@ +SUMMARY = "Multimedia user libraries modules package groups" +LICENSE = "MIT" + +DEPENDS = "mmngr-user-module mmngrbuf-user-module \ + vspmif-user-module libalacdla-l libflacdla-l \ +" + +PR = "r0" + +inherit packagegroup + +PACKAGES = " \ + packagegroup-multimedia-libs \ +" + +RDEPENDS_packagegroup-multimedia-libs = " \ + mmngr-user-module mmngrbuf-user-module \ + vspmif-user-module \ + libalacdla-l libflacdla-l \ +" diff --git a/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif-tp-user-module.bb b/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif-tp-user-module.bb new file mode 100644 index 0000000..a83d871 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif-tp-user-module.bb @@ -0,0 +1,46 @@ +DESCRIPTION = "VSP Manager Interface test app for R-Car Gen3" + +require vspmif.inc + +DEPENDS = "vspmif-user-module mmngr-user-module" +PN = "vspmif-tp-user-module" +PR = "r0" + +S = "${WORKDIR}/git" +VSPMIF_TP_DIR = "vspm_if-tp-user/files/vspm_if" + +# Get Wordsize of test app and change their names later to avoid override +WS_aarch64 = "" +WS_virtclass-multilib-lib32 = "32" + +do_compile() { + cd ${S}/${VSPMIF_TP_DIR} + make all +} + +do_install() { + # Create destination folder + install -d ${D}${RENESAS_DATADIR}/bin/ + + # Copy user test program + if [ X${WS} = "X32" ]; then + install -m 755 ${S}/${VSPMIF_TP_DIR}/vspm_tp ${D}${RENESAS_DATADIR}/bin/vspm_tp32 + install -m 755 ${S}/${VSPMIF_TP_DIR}/fdpm_tp ${D}${RENESAS_DATADIR}/bin/fdpm_tp32 + else + install -m 755 ${S}/${VSPMIF_TP_DIR}/vspm_tp ${D}${RENESAS_DATADIR}/bin/ + install -m 755 ${S}/${VSPMIF_TP_DIR}/fdpm_tp ${D}${RENESAS_DATADIR}/bin/ + fi +} + +PACKAGES = "\ + ${PN} \ + ${PN}-dbg \ +" +FILES_${PN} = " \ + ${@base_conditional('WS', '32', '${RENESAS_DATADIR}/bin/vspm_tp32 ${RENESAS_DATADIR}/bin/fdpm_tp32', \ + '${RENESAS_DATADIR}/bin/vspm_tp ${RENESAS_DATADIR}/bin/fdpm_tp', d)}" + +FILES_${PN}-dbg = " \ + ${RENESAS_DATADIR}/bin/.debug/*" + +RPROVIDES_${PN} += "vspmif-tp-user-module" diff --git a/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif-user-module.bb b/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif-user-module.bb new file mode 100644 index 0000000..bf7fef6 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif-user-module.bb @@ -0,0 +1,49 @@ +DESCRIPTION = "VSP Manager Interface library for R-Car Gen3" + +require vspmif.inc + +DEPENDS = "kernel-module-vspmif mmngr-user-module" +PN = "vspmif-user-module" +PR = "r0" + +S = "${WORKDIR}/git" +VSPMIF_LIB_DIR = "vspm_if-module/files/vspm_if" + +EXTRA_OEMAKE = "ARCH=${TARGET_ARCH}" + +includedir = "${RENESAS_DATADIR}/include" + +do_compile() { + export VSPM_LEGACY_IF="1" + + # Build shared library + cd ${S}/${VSPMIF_LIB_DIR}/if + rm -rf ${S}/${VSPMIF_LIB_DIR}/if/libvspm.so* + oe_runmake +} + +do_install() { + # Create destination folders + install -d ${D}/${libdir} + install -d ${D}/${includedir} + + # Copy shared library + install -m 755 ${S}/${VSPMIF_LIB_DIR}/if/libvspm.so* ${D}/${libdir}/ + cd ${D}/${libdir}/ + ln -sf libvspm.so.1.0.0 libvspm.so.1 + ln -sf libvspm.so.1 libvspm.so + + # Copy shared header files + install -m 644 ${S}/${VSPMIF_LIB_DIR}/include/vspm_public.h ${D}/${includedir}/ + install -m 644 ${S}/${VSPMIF_LIB_DIR}/include/fdpm_api.h ${D}/${includedir}/ +} + +PACKAGES = "\ + ${PN} \ + ${PN}-dev \ + ${PN}-dbg \ +" + +RPROVIDES_${PN} += "vspmif-user-module" +INSANE_SKIP_${PN} += "libdir" +INSANE_SKIP_${PN}-dev += "libdir" diff --git a/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif.inc b/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif.inc new file mode 100644 index 0000000..5a37cf5 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/vspmif-module/vspmif.inc @@ -0,0 +1,15 @@ +LICENSE = "MIT" +LIC_FILES_CHKSUM = " \ + file://COPYING.MIT;md5=30a99e0d36a3da1f5cf93c070ad7888a \ +" + +require include/rcar-gen3-modules-common.inc + +VSPMIF_LIB_URL = "git://github.com/renesas-rcar/vspmif_lib.git" +BRANCH = "rcar_gen3" +SRCREV = "3d2c4c93e7d7b723722f4294d5e81339c06aa03a" + +SRC_URI = "${VSPMIF_LIB_URL};branch=${BRANCH}" + +# This module is machine specific. +PACKAGE_ARCH = "${MACHINE_ARCH}" diff --git a/meta-rcar-gen3/recipes-multimedia/webp/libwebp/disabled_arm_neon_for_0.5.1.diff b/meta-rcar-gen3/recipes-multimedia/webp/libwebp/disabled_arm_neon_for_0.5.1.diff new file mode 100644 index 0000000..e8523df --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/webp/libwebp/disabled_arm_neon_for_0.5.1.diff @@ -0,0 +1,13 @@ +diff --git a/src/dsp/dsp.h b/src/dsp/dsp.h +index 1faac27..8aae380 100644 +--- a/src/dsp/dsp.h ++++ b/src/dsp/dsp.h +@@ -77,7 +77,7 @@ extern "C" { + #if (defined(__ARM_NEON__) || defined(WEBP_ANDROID_NEON) || \ + defined(__aarch64__) || defined(WEBP_HAVE_NEON)) && \ + !defined(__native_client__) +-#define WEBP_USE_NEON ++//#define WEBP_USE_NEON + #endif + + #if defined(_MSC_VER) && _MSC_VER >= 1700 && defined(_M_ARM) diff --git a/meta-rcar-gen3/recipes-multimedia/webp/libwebp_%.bbappend b/meta-rcar-gen3/recipes-multimedia/webp/libwebp_%.bbappend new file mode 100644 index 0000000..9035026 --- /dev/null +++ b/meta-rcar-gen3/recipes-multimedia/webp/libwebp_%.bbappend @@ -0,0 +1,5 @@ +FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:" + +# Add W/A patch for linaro gcc. +# This patch disabled neon. (undefined #WEBP_USE_NEON) +SRC_URI_append = " file://disabled_arm_neon_for_0.5.1.diff" |