diff options
Diffstat (limited to 'meta-rcar-gen3-adas/recipes-bsp/u-boot/u-boot/0020-board-renesas-Add-V3MZF-board.patch')
| -rw-r--r-- | meta-rcar-gen3-adas/recipes-bsp/u-boot/u-boot/0020-board-renesas-Add-V3MZF-board.patch | 477 |
1 files changed, 477 insertions, 0 deletions
diff --git a/meta-rcar-gen3-adas/recipes-bsp/u-boot/u-boot/0020-board-renesas-Add-V3MZF-board.patch b/meta-rcar-gen3-adas/recipes-bsp/u-boot/u-boot/0020-board-renesas-Add-V3MZF-board.patch new file mode 100644 index 0000000..a746262 --- /dev/null +++ b/meta-rcar-gen3-adas/recipes-bsp/u-boot/u-boot/0020-board-renesas-Add-V3MZF-board.patch @@ -0,0 +1,477 @@ +From 0d3af8c73ded0f32c988b4cdc6fa8eb0d75d719a Mon Sep 17 00:00:00 2001 +From: Vladimir Barinov <vladimir.barinov@cogentembedded.com> +Date: Fri, 2 Feb 2018 19:28:08 +0300 +Subject: [PATCH] board: renesas: Add V3M ZF board + +V3M ZF B0 is a board based on R-Car V3M SoC (R8A7797) + +Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> +--- + arch/arm/cpu/armv8/Kconfig | 4 + + board/renesas/v3mzf/Kconfig | 15 +++ + board/renesas/v3mzf/MAINTAINERS | 6 ++ + board/renesas/v3mzf/Makefile | 9 ++ + board/renesas/v3mzf/v3mzf.c | 214 ++++++++++++++++++++++++++++++++++++++++ + configs/v3mzf_defconfig | 9 ++ + include/configs/v3mzf.h | 137 +++++++++++++++++++++++++ + 7 files changed, 394 insertions(+) + create mode 100644 board/renesas/v3mzf/Kconfig + create mode 100644 board/renesas/v3mzf/MAINTAINERS + create mode 100644 board/renesas/v3mzf/Makefile + create mode 100644 board/renesas/v3mzf/v3mzf.c + create mode 100644 configs/v3mzf_defconfig + create mode 100644 include/configs/v3mzf.h + +diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig +index 0edd5db..a2706a6 100644 +--- a/arch/arm/cpu/armv8/Kconfig ++++ b/arch/arm/cpu/armv8/Kconfig +@@ -22,6 +22,9 @@ config TARGET_EAGLE + config TARGET_V3MSK + bool "V3MSK board" + ++config TARGET_V3MZF ++ bool "V3MZF board" ++ + config TARGET_CONDOR + bool "CONDOR board" + +@@ -60,5 +63,6 @@ source "board/renesas/ulcb/Kconfig" + source "board/renesas/eagle/Kconfig" + source "board/renesas/v3msk/Kconfig" + source "board/renesas/condor/Kconfig" ++source "board/renesas/v3mzf/Kconfig" + + endif +diff --git a/board/renesas/v3mzf/Kconfig b/board/renesas/v3mzf/Kconfig +new file mode 100644 +index 0000000..11c7922 +--- /dev/null ++++ b/board/renesas/v3mzf/Kconfig +@@ -0,0 +1,15 @@ ++if TARGET_V3MZF ++ ++config SYS_SOC ++ default "rcar_gen3" ++ ++config SYS_BOARD ++ default "v3mzf" ++ ++config SYS_VENDOR ++ default "renesas" ++ ++config SYS_CONFIG_NAME ++ default "v3mzf" if R8A7797 ++ ++endif +diff --git a/board/renesas/v3mzf/MAINTAINERS b/board/renesas/v3mzf/MAINTAINERS +new file mode 100644 +index 0000000..140af42 +--- /dev/null ++++ b/board/renesas/v3mzf/MAINTAINERS +@@ -0,0 +1,6 @@ ++V3MZF BOARD ++M: Cogent Embedded, Inc. <source@cogentembedded.com> ++S: Maintained ++F: board/renesas/v3mzf/ ++F: include/configs/v3mzf.h ++F: configs/v3mzf_defconfig +diff --git a/board/renesas/v3mzf/Makefile b/board/renesas/v3mzf/Makefile +new file mode 100644 +index 0000000..ed31453 +--- /dev/null ++++ b/board/renesas/v3mzf/Makefile +@@ -0,0 +1,9 @@ ++# ++# board/renesas/v3mzf/Makefile ++# ++# Copyright (C) 2018 Cogent Embedded, Inc. ++# ++# SPDX-License-Identifier: GPL-2.0+ ++# ++ ++obj-y := v3mzf.o ../rcar-gen3-common/common.o +diff --git a/board/renesas/v3mzf/v3mzf.c b/board/renesas/v3mzf/v3mzf.c +new file mode 100644 +index 0000000..fa1e299 +--- /dev/null ++++ b/board/renesas/v3mzf/v3mzf.c +@@ -0,0 +1,217 @@ ++/* ++ * board/renesas/v3mzf/v3mzf.c ++ * This is V3MZF board support. ++ * ++ * Copyright (C) 2018 Cogent Embedded, Inc. ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#include <common.h> ++#include <malloc.h> ++#include <netdev.h> ++#include <dm.h> ++#include <dm/platform_data/serial_sh.h> ++#include <asm/processor.h> ++#include <asm/mach-types.h> ++#include <asm/io.h> ++#include <asm/errno.h> ++#include <asm/arch/sys_proto.h> ++#include <asm/gpio.h> ++#include <asm/arch/prr_depend.h> ++#include <asm/arch/gpio.h> ++#include <asm/arch/rcar_gen3.h> ++#include <asm/arch/rcar-mstp.h> ++#include <asm/arch/sh_sdhi.h> ++#include <i2c.h> ++#include <mmc.h> ++ ++DECLARE_GLOBAL_DATA_PTR; ++ ++#define SCIF0_MSTP207 (1 << 7) ++#define ETHERAVB_MSTP812 (1 << 12) ++#define RPC_MSTP917 (1 << 17) ++#define SD0_MSTP314 (1 << 14) ++#define GP1_MSTP911 (1 << 11) ++ ++#define SD0CKCR 0xE6150074 ++ ++void s_init(void) ++{ ++ struct rcar_rwdt *rwdt = (struct rcar_rwdt *)RWDT_BASE; ++ struct rcar_swdt *swdt = (struct rcar_swdt *)SWDT_BASE; ++ ++ /* Watchdog init */ ++ writel(0xA5A5A500, &rwdt->rwtcsra); ++ writel(0xA5A5A500, &swdt->swtcsra); ++} ++ ++int board_early_init_f(void) ++{ ++ int freq; ++ ++ rcar_prr_init(); ++ ++ writel(0xa5a5ffff, 0xe6150900); ++ writel(0x5a5a0000, 0xe6150904); ++ mstp_clrbits_le32(MSTPSR1, SMSTPCR1, 0x02000000); ++ /* SCIF0 */ ++ mstp_clrbits_le32(MSTPSR2, SMSTPCR2, SCIF0_MSTP207); ++ /* SDHI2/MMC */ ++ mstp_clrbits_le32(MSTPSR3, SMSTPCR3, SD0_MSTP314); ++ /* EHTERAVB */ ++ mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHERAVB_MSTP812); ++ /* QSPI/RPC */ ++ mstp_clrbits_le32(MSTPSR9, SMSTPCR9, RPC_MSTP917); ++ /* GPIO1 */ ++ mstp_clrbits_le32(MSTPSR9, SMSTPCR9, GP1_MSTP911); ++ ++ freq = rcar_get_sdhi_config_clk(); ++ writel(freq, SD0CKCR); ++ ++ return 0; ++} ++ ++int board_init(void) ++{ ++ /* adress of boot parameters */ ++ gd->bd->bi_boot_params = CONFIG_SYS_TEXT_BASE + 0x50000; ++ ++ /* Init PFC controller */ ++ pinmux_init(); ++#ifdef CONFIG_RAVB ++ /* GPSR1 */ ++ gpio_request(GPIO_GFN_AVB0_AVTP_CAPTURE, NULL); ++ gpio_request(GPIO_FN_AVB0_AVTP_MATCH, NULL); ++ gpio_request(GPIO_FN_AVB0_LINK, NULL); ++ gpio_request(GPIO_FN_AVB0_PHY_INT, NULL); ++ /* gpio_request(GPIO_FN_AVB0_MAGIC, NULL); */ ++ gpio_request(GPIO_FN_AVB0_MDC, NULL); ++ gpio_request(GPIO_FN_AVB0_MDIO, NULL); ++ gpio_request(GPIO_FN_AVB0_TXCREFCLK, NULL); ++ gpio_request(GPIO_FN_AVB0_TD3, NULL); ++ gpio_request(GPIO_FN_AVB0_TD2, NULL); ++ gpio_request(GPIO_FN_AVB0_TD1, NULL); ++ gpio_request(GPIO_FN_AVB0_TD0, NULL); ++ gpio_request(GPIO_FN_AVB0_TXC, NULL); ++ gpio_request(GPIO_FN_AVB0_TX_CTL, NULL); ++ gpio_request(GPIO_FN_AVB0_RD3, NULL); ++ gpio_request(GPIO_FN_AVB0_RD2, NULL); ++ gpio_request(GPIO_FN_AVB0_RD1, NULL); ++ gpio_request(GPIO_FN_AVB0_RD0, NULL); ++ gpio_request(GPIO_FN_AVB0_RXC, NULL); ++ gpio_request(GPIO_FN_AVB0_RX_CTL, NULL); ++ /* IPSR7 */ ++ gpio_request(GPIO_IFN_AVB0_AVTP_CAPTURE, NULL); ++ /* IPSR3 */ ++ gpio_request(GPIO_FN_AVB0_AVTP_PPS, NULL); ++ ++ /* AVB_PHY_RST */ ++ gpio_request(GPIO_GP_1_16, NULL); ++ gpio_direction_output(GPIO_GP_1_16, 0); ++ mdelay(20); ++ gpio_set_value(GPIO_GP_1_16, 1); ++ udelay(1); ++#endif ++ /* QSPI/RPC */ ++ gpio_request(GPIO_FN_QSPI0_SPCLK, NULL); ++ gpio_request(GPIO_FN_QSPI0_MOSI_IO0, NULL); ++ gpio_request(GPIO_FN_QSPI0_MISO_IO1, NULL); ++ gpio_request(GPIO_FN_QSPI0_IO2, NULL); ++ gpio_request(GPIO_FN_QSPI0_IO3, NULL); ++ gpio_request(GPIO_FN_QSPI0_SSL, NULL); ++ gpio_request(GPIO_FN_QSPI1_SPCLK, NULL); ++ gpio_request(GPIO_FN_QSPI1_MOSI_IO0, NULL); ++ gpio_request(GPIO_FN_QSPI1_MISO_IO1, NULL); ++ gpio_request(GPIO_FN_QSPI1_IO2, NULL); ++ gpio_request(GPIO_FN_QSPI1_IO3, NULL); ++ gpio_request(GPIO_FN_QSPI1_SSL, NULL); ++ gpio_request(GPIO_FN_RPC_RESET_N, NULL); ++ gpio_request(GPIO_FN_RPC_WP_N, NULL); ++ gpio_request(GPIO_FN_RPC_INT_N, NULL); ++ ++ return 0; ++} ++ ++#define MAHR 0xE68005C0 ++#define MALR 0xE68005C8 ++int board_eth_init(bd_t *bis) ++{ ++ int ret = -ENODEV; ++ u32 val; ++ unsigned char enetaddr[6]; ++ ++ if (!eth_getenv_enetaddr("ethaddr", enetaddr)) ++ return ret; ++ ++ /* Set Mac address */ ++ val = enetaddr[0] << 24 | enetaddr[1] << 16 | ++ enetaddr[2] << 8 | enetaddr[3]; ++ writel(val, MAHR); ++ ++ val = enetaddr[4] << 8 | enetaddr[5]; ++ writel(val, MALR); ++#ifdef CONFIG_RAVB ++ ret = ravb_initialize(bis); ++#endif ++ return ret; ++} ++ ++/* V3MZF has KSZ9031RNX */ ++int board_phy_config(struct phy_device *phydev) ++{ ++ return 0; ++} ++ ++int board_mmc_init(bd_t *bis) ++{ ++ int ret = -ENODEV; ++#ifdef CONFIG_SH_SDHI ++ /* SDHI2/eMMC */ ++ gpio_request(GPIO_FN_MMC_D0, NULL); ++ gpio_request(GPIO_FN_MMC_D1, NULL); ++ gpio_request(GPIO_FN_MMC_D2, NULL); ++ gpio_request(GPIO_FN_MMC_D3, NULL); ++ gpio_request(GPIO_FN_MMC_D4, NULL); ++ gpio_request(GPIO_FN_MMC_D5, NULL); ++ gpio_request(GPIO_FN_MMC_D6, NULL); ++ gpio_request(GPIO_FN_MMC_D7, NULL); ++ gpio_request(GPIO_FN_MMC_CLK, NULL); ++ gpio_request(GPIO_FN_MMC_CMD, NULL); ++ gpio_request(GPIO_FN_MMC_CD, NULL); ++ gpio_request(GPIO_FN_MMC_WP, NULL); ++ ++ ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI2_BASE, 0, ++ SH_SDHI_QUIRK_64BIT_BUF); ++#endif ++ return ret; ++} ++ ++int dram_init(void) ++{ ++ gd->ram_size = PHYS_SDRAM_1_SIZE; ++ ++ return 0; ++} ++ ++void dram_init_banksize(void) ++{ ++ gd->bd->bi_dram[0].start = PHYS_SDRAM_1; ++ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; ++} ++ ++const struct rcar_sysinfo sysinfo = { ++ CONFIG_RCAR_BOARD_STRING ++}; ++ ++void reset_cpu(ulong addr) ++{ ++} ++ ++#if defined(CONFIG_DISPLAY_BOARDINFO) ++int checkboard(void) ++{ ++ printf("Board: %s\n", sysinfo.board_string); ++ return 0; ++} ++#endif +diff --git a/configs/v3mzf_defconfig b/configs/v3mzf_defconfig +new file mode 100644 +index 0000000..49f02e7 +--- /dev/null ++++ b/configs/v3mzf_defconfig +@@ -0,0 +1,9 @@ ++CONFIG_ARM=y ++CONFIG_RCAR_GEN3=y ++CONFIG_DM_SERIAL=y ++CONFIG_TARGET_V3MZF=y ++CONFIG_R8A7797=y ++CONFIG_SPL=y ++CONFIG_SH_SDHI=y ++CONFIG_SPI_FLASH=y ++CONFIG_SPI_FLASH_SPANSION=y +diff --git a/include/configs/v3mzf.h b/include/configs/v3mzf.h +new file mode 100644 +index 0000000..8ce53aa +--- /dev/null ++++ b/include/configs/v3mzf.h +@@ -0,0 +1,137 @@ ++/* ++ * include/configs/v3mzf.h ++ * This file is V3MZF board configuration. ++ * CPU r8a7797. ++ * ++ * Copyright (C) 2017 Cogent Embedded, Inc. ++ * ++ * SPDX-License-Identifier: GPL-2.0+ ++ */ ++ ++#ifndef __V3MZF_H ++#define __V3MZF_H ++ ++#undef DEBUG ++#define CONFIG_RCAR_BOARD_STRING "V3MZF" ++#define CONFIG_RCAR_TARGET_STRING "r8a7797" ++ ++#include "rcar-gen3-common.h" ++ ++/* Cache Definitions */ ++//#define CONFIG_SYS_DCACHE_OFF ++//#define CONFIG_SYS_ICACHE_OFF ++ ++/* SCIF */ ++#define CONFIG_SCIF_CONSOLE ++#define CONFIG_CONS_SCIF0 ++#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_S3D4_CLK_FREQ ++ ++/* [A] Hyper Flash */ ++/* use to RPC(SPI Multi I/O Bus Controller) */ ++ ++ /* underconstruction */ ++ ++#define CONFIG_SYS_NO_FLASH ++#if defined(CONFIG_SYS_NO_FLASH) ++#define CONFIG_SPI ++#define CONFIG_RCAR_GEN3_QSPI ++#define CONFIG_SH_QSPI_BASE 0xEE200000 ++#define CONFIG_CMD_SF ++#define CONFIG_CMD_SPI ++#define CONFIG_SPI_FLASH ++#define CONFIG_SPI_FLASH_SPANSION ++#else ++#undef CONFIG_CMD_SF ++#undef CONFIG_CMD_SPI ++#undef CONFIG_SPI_FLASH ++#undef CONFIG_SPI_FLASH_SPANSION ++#endif ++ ++/* Ethernet RAVB */ ++#define CONFIG_RAVB ++#define CONFIG_RAVB_PHY_ADDR 0x0 ++#define CONFIG_RAVB_PHY_MODE PHY_INTERFACE_MODE_RGMII_ID ++#define CONFIG_NET_MULTI ++#define CONFIG_PHYLIB ++#define CONFIG_PHY_MICREL ++#define CONFIG_BITBANGMII ++#define CONFIG_BITBANGMII_MULTI ++#define CONFIG_SH_ETHER_BITBANG ++ ++/* Board Clock */ ++/* XTAL_CLK : 33.33MHz */ ++#define RCAR_XTAL_CLK 33333333u ++#define CONFIG_SYS_CLK_FREQ RCAR_XTAL_CLK ++/* ch0to2 CPclk, ch3to11 S3D2_PEREclk, ch12to14 S3D2_RTclk */ ++/* CPclk 16.66MHz, S3D2 133.33MHz , S3D4 66.66MHz */ ++#define CONFIG_CP_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) ++#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 192 / 2) ++#define CONFIG_S3D2_CLK_FREQ (266666666u/2) ++#define CONFIG_S3D4_CLK_FREQ (266666666u/4) ++ ++/* Generic Timer Definitions (use in assembler source) */ ++#define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */ ++ ++/* Generic Interrupt Controller Definitions */ ++#define GICD_BASE (0xF1010000) ++#define GICC_BASE (0xF1020000) ++#define CONFIG_GICV2 ++ ++/* USB */ ++#undef CONFIG_CMD_USB ++ ++/* SDHI */ ++#define CONFIG_MMC ++#define CONFIG_CMD_MMC ++#define CONFIG_GENERIC_MMC ++#define CONFIG_SH_SDHI_FREQ 200000000 ++#define CONFIG_SH_SDHI_MMC ++ ++/* ENV setting */ ++#define CONFIG_ENV_OVERWRITE ++#define CONFIG_ENV_SECT_SIZE (256 * 1024) ++#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE) ++#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) ++ ++//#define CONFIG_ENV_IS_IN_MMC ++#define CONFIG_ENV_IS_IN_SPI_FLASH ++ ++#if defined(CONFIG_ENV_IS_IN_MMC) ++/* Environment in eMMC, at the end of 2nd "boot sector" */ ++#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE) ++#define CONFIG_SYS_MMC_ENV_DEV 0 ++#define CONFIG_SYS_MMC_ENV_PART 2 ++#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH) ++/* Environment in QSPI */ ++#define CONFIG_ENV_ADDR 0x700000 ++#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR) ++#else ++#define CONFIG_ENV_IS_NOWHERE ++#endif ++ ++/* Module clock supply/stop status bits */ ++/* MFIS */ ++#define CONFIG_SMSTP2_ENA 0x00002000 ++/* serial(SCIF0) */ ++#define CONFIG_SMSTP3_ENA 0x00000400 ++/* INTC-AP, INTC-EX */ ++#define CONFIG_SMSTP4_ENA 0x00000180 ++ ++#define CONFIG_EXTRA_ENV_SETTINGS \ ++ "fdt_high=0xffffffffffffffff\0" \ ++ "initrd_high=0xffffffffffffffff\0" \ ++ "ethact=ravb\0" \ ++ "ethaddr=2E:11:22:33:44:55\0" ++ ++#define CONFIG_BOOTARGS \ ++ "root=/dev/nfs rw ip=dhcp" ++ ++#define CONFIG_BOOTCOMMAND \ ++ "bootp 0x48080000 Image; tftp 0x48000000 r8a7797-v3mzf.dtb; " \ ++ "booti 0x48080000 - 0x48000000" ++ ++#define CONFIG_CMD_MEMTEST ++#define CONFIG_SYS_MEMTEST_START 0x40000000 ++#define CONFIG_SYS_MEMTEST_END 0x80000000 ++ ++#endif /* __V3MZF_H */ +-- +1.9.1 + |