diff options
Diffstat (limited to 'meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0032-arm64-dts-r8a7795-es1-h3ulcb-view-add-ADAS-board.patch')
-rw-r--r-- | meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0032-arm64-dts-r8a7795-es1-h3ulcb-view-add-ADAS-board.patch | 581 |
1 files changed, 0 insertions, 581 deletions
diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0032-arm64-dts-r8a7795-es1-h3ulcb-view-add-ADAS-board.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0032-arm64-dts-r8a7795-es1-h3ulcb-view-add-ADAS-board.patch deleted file mode 100644 index 24af837..0000000 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0032-arm64-dts-r8a7795-es1-h3ulcb-view-add-ADAS-board.patch +++ /dev/null @@ -1,581 +0,0 @@ -From 14d2ada2089db7db1a059af37f371f6e2df213f4 Mon Sep 17 00:00:00 2001 -From: Vladimir Barinov <vladimir.barinov@cogentembedded.com> -Date: Wed, 4 Jan 2017 10:37:23 +0300 -Subject: [PATCH] arm64: dts: r8a7795-es1-h3ulcb-view: add ADAS board - -H3ULCB.View board on R8A7795 ES1.x SoC - -Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> ---- - arch/arm64/boot/dts/renesas/Makefile | 1 + - .../boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts | 546 +++++++++++++++++++++ - 2 files changed, 547 insertions(+) - create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts - -diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile -index 2a00759..43aa35d 100644 ---- a/arch/arm64/boot/dts/renesas/Makefile -+++ b/arch/arm64/boot/dts/renesas/Makefile -@@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb - - # ADAS boards - dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x-view.dtb -+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-view.dtb - - always := $(dtb-y) - clean-files := *.dtb -diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts -new file mode 100644 -index 0000000..de56fa4 ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts -@@ -0,0 +1,546 @@ -+/* -+ * Device Tree Source for the H3ULCB.View board on r8a7795 ES1.x -+ * -+ * Copyright (C) 2016-2017 Renesas Electronics Corp. -+ * Copyright (C) 2016-2017 Cogent Embedded, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+#include "r8a7795-es1-h3ulcb.dts" -+ -+/ { -+ model = "Renesas H3ULCB.View board based on r8a7795"; -+}; -+ -+&i2c4 { -+ ov106xx@0 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x60>; -+ -+ port@0 { -+ ov106xx_in0: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin0ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep0>; -+ }; -+ }; -+ }; -+ -+ ov106xx@1 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x61>; -+ -+ port@0 { -+ ov106xx_in1: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin1ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep1>; -+ }; -+ }; -+ }; -+ -+ ov106xx@2 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x62>; -+ -+ port@0 { -+ ov106xx_in2: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin2ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep2>; -+ }; -+ }; -+ }; -+ -+ ov106xx@3 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x63>; -+ -+ port@0 { -+ ov106xx_in3: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin3ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_des0ep3: endpoint { -+ remote-endpoint = <&max9286_des0ep3>; -+ }; -+ }; -+ }; -+ -+ ov106xx@4 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x64>; -+ -+ port@0 { -+ ov106xx_in4: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin4ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep0>; -+ }; -+ }; -+ }; -+ -+ ov106xx@5 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x65>; -+ -+ port@0 { -+ ov106xx_in5: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin5ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep1>; -+ }; -+ }; -+ }; -+ -+ ov106xx@6 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x66>; -+ -+ port@0 { -+ ov106xx_in6: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin6ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep2>; -+ }; -+ }; -+ }; -+ -+ ov106xx@7 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x67>; -+ -+ port@0 { -+ ov106xx_in7: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin7ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_des1ep3: endpoint { -+ remote-endpoint = <&max9286_des1ep3>; -+ }; -+ }; -+ }; -+ -+ max9286-max9271@0 { -+ compatible = "maxim,max9286-max9271"; -+ reg = <0x4c>; -+ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; -+ maxim,sensor_delay = <0>; -+ maxim,links = <4>; -+ maxim,lanes = <4>; -+ maxim,resetb-gpio = <1>; -+ maxim,fsync-mode = "automatic"; -+ maxim,timeout = <100>; -+ maxim,i2c-quirk = <0x6c>; -+ -+ port@0 { -+ max9286_des0ep0: endpoint@0 { -+ max9271-addr = <0x50>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ max9286_des0ep1: endpoint@1 { -+ max9271-addr = <0x51>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ max9286_des0ep2: endpoint@2 { -+ max9271-addr = <0x52>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ max9286_des0ep3: endpoint@3 { -+ max9271-addr = <0x53>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ max9286_csi0ep0: endpoint { -+ csi-rate = <700>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ -+ max9286-max9271@1 { -+ compatible = "maxim,max9286-max9271"; -+ reg = <0x6c>; -+ gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; -+ maxim,sensor_delay = <0>; -+ maxim,links = <4>; -+ maxim,lanes = <4>; -+ maxim,resetb-gpio = <1>; -+ maxim,fsync-mode = "automatic"; -+ maxim,timeout = <100>; -+ -+ port@0 { -+ max9286_des1ep0: endpoint@0 { -+ max9271-addr = <0x54>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ max9286_des1ep1: endpoint@1 { -+ max9271-addr = <0x55>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ max9286_des1ep2: endpoint@2 { -+ max9271-addr = <0x56>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in6>; -+ }; -+ max9286_des1ep3: endpoint@3 { -+ max9271-addr = <0x57>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in7>; -+ }; -+ }; -+ port@1 { -+ max9286_csi2ep0: endpoint { -+ csi-rate = <700>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+}; -+ -+&pcie_bus_clk { -+ clock-frequency = <100000000>; -+ status = "okay"; -+}; -+ -+&pciec1 { -+ status = "okay"; -+}; -+ -+&vin0 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin0ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ }; -+ port@1 { -+ csi0ep0: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin0_max9286_des0ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep0>; -+ }; -+ }; -+ }; -+}; -+ -+&vin1 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin1ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <1>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ }; -+ port@1 { -+ csi0ep1: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin1_max9286_des0ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep1>; -+ }; -+ }; -+ }; -+}; -+ -+&vin2 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin2ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <2>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ }; -+ port@1 { -+ csi0ep2: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin2_max9286_des0ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep2>; -+ }; -+ }; -+ }; -+}; -+ -+&vin3 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin3ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <3>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ csi0ep3: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin3_max9286_des0ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep3>; -+ }; -+ }; -+ }; -+}; -+ -+&vin4 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin4ep0: endpoint { -+ csi,select = "csi41"; -+ virtual,channel = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep0: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin4_max9286_des1ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep0>; -+ }; -+ }; -+ }; -+}; -+ -+&vin5 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin5ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <1>; -+ remote-endpoint = <&ov106xx_in5>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep1: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin5_max9286_des1ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep1>; -+ }; -+ }; -+ }; -+}; -+ -+&vin6 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin6ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <2>; -+ remote-endpoint = <&ov106xx_in6>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep2: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin6_max9286_des1ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep2>; -+ }; -+ }; -+ }; -+}; -+ -+&vin7 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin7ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <3>; -+ remote-endpoint = <&ov106xx_in7>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep3: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin7_max9286_des1ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep3>; -+ }; -+ }; -+ }; -+}; -+ -+&csi2_40 { -+ status = "okay"; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "ycbcr422"; -+ receive,vc = <0>; -+ }; -+ csi2_vc1 { -+ data,type = "ycbcr422"; -+ receive,vc = <1>; -+ }; -+ csi2_vc2 { -+ data,type = "ycbcr422"; -+ receive,vc = <2>; -+ }; -+ csi2_vc3 { -+ data,type = "ycbcr422"; -+ receive,vc = <3>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_40_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ csi-rate = <300>; -+ }; -+ }; -+}; -+ -+&csi2_41 { -+ status = "okay"; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "ycbcr422"; -+ receive,vc = <0>; -+ }; -+ csi2_vc1 { -+ data,type = "ycbcr422"; -+ receive,vc = <1>; -+ }; -+ csi2_vc2 { -+ data,type = "ycbcr422"; -+ receive,vc = <2>; -+ }; -+ csi2_vc3 { -+ data,type = "ycbcr422"; -+ receive,vc = <3>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_41_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ csi-rate = <300>; -+ }; -+ }; -+}; --- -1.9.1 - |