diff options
Diffstat (limited to 'meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-r8a7795-h3ulcb-had-add-ADAS-board.patch')
| -rw-r--r-- | meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-r8a7795-h3ulcb-had-add-ADAS-board.patch | 315 |
1 files changed, 0 insertions, 315 deletions
diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-r8a7795-h3ulcb-had-add-ADAS-board.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-r8a7795-h3ulcb-had-add-ADAS-board.patch deleted file mode 100644 index 861acb0..0000000 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-r8a7795-h3ulcb-had-add-ADAS-board.patch +++ /dev/null @@ -1,315 +0,0 @@ -From 30240b74fe0b5c851127996328504e86a9fc4407 Mon Sep 17 00:00:00 2001 -From: Vladimir Barinov <vladimir.barinov@cogentembedded.com> -Date: Wed, 4 Jan 2017 10:41:48 +0300 -Subject: [PATCH] arm64: dts: r8a7795-h3ulcb-had: add ADAS board - -H3ULCB.HAD board on R8A7795 SoC - -Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> ---- - arch/arm64/boot/dts/renesas/Makefile | 1 + - .../boot/dts/renesas/r8a7795-h3ulcb-had-alfa.dts | 22 +++ - .../boot/dts/renesas/r8a7795-h3ulcb-had-beta.dts | 23 +++ - .../arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi | 218 +++++++++++++++++++++ - 4 files changed, 264 insertions(+) - create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-alfa.dts - create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-beta.dts - create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi - -diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile -index 387652e..9dad6dc 100644 ---- a/arch/arm64/boot/dts/renesas/Makefile -+++ b/arch/arm64/boot/dts/renesas/Makefile -@@ -14,6 +14,7 @@ dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-view.dtb - dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb r8a7796-m3ulcb-kf-v1.dtb - dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x-view.dtb - dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-view.dtb -+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-had-alfa.dtb r8a7795-h3ulcb-had-beta.dtb - - always := $(dtb-y) - clean-files := *.dtb -diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-alfa.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-alfa.dts -new file mode 100644 -index 0000000..ae115bd ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-alfa.dts -@@ -0,0 +1,22 @@ -+/* -+ * Device Tree Source for the H3ULCB.HAD board Alfa side -+ * -+ * Copyright (C) 2017 Renesas Electronics Corp. -+ * Copyright (C) 2017 Cogent Embedded, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+#include "r8a7795-h3ulcb-had.dtsi" -+ -+/ { -+ model = "Renesas H3ULCB.HAD board Alfa side based on r8a7795"; -+}; -+ -+&pciec0 { -+ status = "okay"; -+ -+ /* Root complex */ -+}; -diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-beta.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-beta.dts -new file mode 100644 -index 0000000..805067e ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-beta.dts -@@ -0,0 +1,23 @@ -+/* -+ * Device Tree Source for the H3ULCB.HAD board Beta side -+ * -+ * Copyright (C) 2017 Renesas Electronics Corp. -+ * Copyright (C) 2017 Cogent Embedded, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+#include "r8a7795-h3ulcb-had.dtsi" -+ -+/ { -+ model = "Renesas H3ULCB.HAD board Beta side based on r8a7795"; -+}; -+ -+&pciec0 { -+ status = "okay"; -+ -+ /* Endpoint */ -+ endpoint; -+}; -diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi -new file mode 100644 -index 0000000..d146938 ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi -@@ -0,0 +1,219 @@ -+/* -+ * Device Tree Source for the H3ULCB.HAD board on r8a7795 -+ * -+ * Copyright (C) 2016-2017 Renesas Electronics Corp. -+ * Copyright (C) 2016-2017 Cogent Embedded, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+/* -+ * MSIOF0 - /dev/spidev1.0 connected to FPGA ethernet switch (both sides) -+ * MSIOF1 - /dev/spidev2.0 connected to RH850 (sideA to CSIH1, sideB to CSIH0) -+ */ -+ -+#include "r8a7795-h3ulcb-view.dts" -+ -+/ { -+ model = "Renesas H3ULCB.HAD board based on r8a7795"; -+ -+ aliases { -+ serial1 = &scif1; -+ spi1 = &spi0_gpio; -+ spi2 = &spi1_gpio; -+ }; -+ -+ chosen { -+ stdout-path = "serial1:115200n8"; -+ }; -+ -+ spi0_gpio: spi_gpio@0 { -+ compatible = "spi-gpio"; -+ num-chipselects = <1>; -+ gpio-sck = <&gpio5 17 0>; -+ gpio-mosi = <&gpio5 20 0>; -+ gpio-miso = <&gpio5 22 0>; -+ cs-gpios = <&gpio5 19 0>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ spidev@0 { -+ compatible = "spi-gpio"; -+ reg = <0>; -+ spi-max-frequency = <2000000>; -+ spi-cpha; -+ spi-cpol; -+ }; -+ }; -+ -+ spi1_gpio: spi_gpio@1 { -+ compatible = "spi-gpio"; -+ num-chipselects = <1>; -+ gpio-sck = <&gpio6 8 0>; -+ gpio-mosi = <&gpio6 7 0>; -+ gpio-miso = <&gpio6 10 0>; -+ cs-gpios = <&gpio6 5 0>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ spidev@0 { -+ compatible = "spi-gpio"; -+ reg = <0>; -+ spi-max-frequency = <2000000>; -+ spi-cpha; -+ spi-cpol; -+ }; -+ }; -+ -+ hdmi1-out { -+ compatible = "hdmi-connector"; -+ type = "a"; -+ -+ port { -+ hdmi1_con: endpoint { -+ remote-endpoint = <&rcar_dw_hdmi1_out>; -+ }; -+ }; -+ }; -+}; -+ -+&du { -+ ports { -+ port@1 { -+ endpoint { -+ remote-endpoint = <&rcar_dw_hdmi0_in>; -+ }; -+ }; -+ port@2 { -+ endpoint { -+ remote-endpoint = <&rcar_dw_hdmi1_in>; -+ }; -+ }; -+ }; -+}; -+ -+&hdmi1 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ port@0 { -+ reg = <0>; -+ rcar_dw_hdmi1_in: endpoint { -+ remote-endpoint = <&du_out_hdmi1>; -+ }; -+ }; -+ port@1 { -+ reg = <1>; -+ rcar_dw_hdmi1_out: endpoint { -+ remote-endpoint = <&hdmi1_con>; -+ }; -+ }; -+ }; -+}; -+ -+&pfc { -+ scif1_pins: scif1 { -+ groups = "scif1_data_a"; -+ function = "scif1"; -+ }; -+ -+ msiof0_pins: spi1 { -+ groups = "msiof0_clk", "msiof0_rxd", "msiof0_txd", -+ "msiof0_ss1"; -+ function = "msiof0"; -+ }; -+ -+ msiof1_pins: spi2 { -+ groups = "msiof1_clk_a", "msiof1_rxd_a", "msiof1_txd_a", -+ "msiof1_ss1_a"; -+ function = "msiof1"; -+ }; -+ -+ sound_clk_pins: sound-clk { -+ groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a", -+ "audio_clkout_a" /*, "audio_clkout3_a"*/; -+ function = "audio_clk"; -+ }; -+ -+ usb31_pins: usb31 { -+ groups = "usb31"; -+ function = "usb31"; -+ }; -+ -+ can0_pins: can0 { -+ groups = "can0_data_a"; -+ function = "can0"; -+ }; -+ -+ canfd0_pins: canfd0 { -+ groups = "canfd0_data_a"; -+ function = "canfd0"; -+ }; -+}; -+ -+&scif1 { -+ pinctrl-0 = <&scif1_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+}; -+ -+&avb { -+ /delete-property/phy-handle; -+ /delete-property/phy-gpios; -+ /delete-node/ethernet-phy@0; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+}; -+ -+&msiof0 { -+ pinctrl-0 = <&msiof0_pins>; -+ pinctrl-names = "default"; -+ status = "disabled"; -+ cs-gpios = <&gpio5 19 0>; -+ -+ spidev@0 { -+ compatible = "renesas,sh-msiof"; -+ reg = <0>; -+ spi-max-frequency = <66666666>; -+ spi-cpha; -+ spi-cpol; -+ }; -+}; -+ -+&msiof1 { -+ status = "disabled"; -+ cs-gpios = <&gpio6 5 0>; -+}; -+ -+&can0 { -+ pinctrl-0 = <&can0_pins>; -+ pinctrl-names = "default"; -+ status = "disabled"; -+ -+ renesas,can-clock-select = <0x0>; -+ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH /* enable - shared with camera board */ -+ &gpio2 7 GPIO_ACTIVE_LOW /* standby */ -+ >; -+}; -+ -+&canfd { -+ pinctrl-0 = <&canfd0_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ -+ renesas,can-clock-select = <0x0>; -+ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH /* enable - shared with camera board */ -+ &gpio2 7 GPIO_ACTIVE_LOW /* standby */ -+ >; -+ -+ channel0 { -+ status = "okay"; -+ }; -+}; --- -1.9.1 - |