summaryrefslogtreecommitdiffstats
path: root/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0041-arm64-dts-r8a7795-h3ulcb-kf-add-ADAS-board.patch
diff options
context:
space:
mode:
Diffstat (limited to 'meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0041-arm64-dts-r8a7795-h3ulcb-kf-add-ADAS-board.patch')
-rw-r--r--meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0041-arm64-dts-r8a7795-h3ulcb-kf-add-ADAS-board.patch2137
1 files changed, 0 insertions, 2137 deletions
diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0041-arm64-dts-r8a7795-h3ulcb-kf-add-ADAS-board.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0041-arm64-dts-r8a7795-h3ulcb-kf-add-ADAS-board.patch
deleted file mode 100644
index 1a50c81..0000000
--- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0041-arm64-dts-r8a7795-h3ulcb-kf-add-ADAS-board.patch
+++ /dev/null
@@ -1,2137 +0,0 @@
-From f1f043eab3dd06552b3600af1caf50e535f766f1 Mon Sep 17 00:00:00 2001
-From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
-Date: Wed, 4 Jan 2017 10:37:23 +0300
-Subject: [PATCH] arm64: dts: r8a7795-h3ulcb-kf: add ADAS board
-
-Kingfisher board on R8A7795 SoC
-
-Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
----
- arch/arm64/boot/dts/renesas/Makefile | 1 +
- .../boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts | 443 ++++++
- arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts | 1651 ++++++++++++++++++++
- 3 files changed, 2095 insertions(+)
- create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts
- create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts
-
-diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
-index d163df7..86a08db 100644
---- a/arch/arm64/boot/dts/renesas/Makefile
-+++ b/arch/arm64/boot/dts/renesas/Makefile
-@@ -15,6 +15,7 @@ dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb r8a7796-m3ulcb-kf-v1.dtb
- dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x-view.dtb
- dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-view.dtb
- dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-had-alfa.dtb r8a7795-h3ulcb-had-beta.dtb
-+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb r8a7795-h3ulcb-kf-v1.dtb
-
- always := $(dtb-y)
- clean-files := *.dtb
-diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts
-new file mode 100644
-index 0000000..4b10d31
---- /dev/null
-+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts
-@@ -0,0 +1,443 @@
-+/*
-+ * Device Tree Source for the H3ULCB Kingfisher V1 board
-+ *
-+ * Copyright (C) 2017 Renesas Electronics Corp.
-+ * Copyright (C) 2017 Cogent Embedded, Inc.
-+ *
-+ * This file is licensed under the terms of the GNU General Public License
-+ * version 2. This program is licensed "as is" without any warranty of any
-+ * kind, whether express or implied.
-+ */
-+
-+#include "r8a7795-h3ulcb-kf.dts"
-+
-+/ {
-+ model = "Renesas H3ULCB Kingfisher V1 board based on r8a7795";
-+
-+ aliases {
-+ serial1 = &hscif0;
-+ serial2 = &hscif1;
-+ serial3 = &scif1;
-+ };
-+
-+ wlan_en: regulator@4 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "wlan-en-regulator";
-+
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+
-+ gpio = <&gpio_ext_74 4 GPIO_ACTIVE_HIGH>;
-+ enable-active-high;
-+ };
-+
-+ codec_en_reg: regulator@6 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "codec-en-regulator";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+
-+ gpio = <&gpio_ext_74 15 0>;
-+
-+ /* delay - CHECK */
-+ startup-delay-us = <70000>;
-+ enable-active-high;
-+ };
-+
-+ amp_en_reg: regulator@7 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "amp-en-regulator";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+
-+ gpio = <&gpio_ext_74 0 0>;
-+
-+ startup-delay-us = <0>;
-+ enable-active-high;
-+ };
-+
-+ /delete-node/regulator@8;
-+
-+ sdio_switch: regulator@9 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "wifi_on";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ gpio = <&gpio_ext_74 5 0>;
-+ enable-active-low;
-+ regulator-always-on;
-+ };
-+
-+ /delete-node/regulator@10;
-+
-+ radio_switch: regulator@11 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "radio_on";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ gpio = <&gpio_ext_74 13 GPIO_ACTIVE_HIGH>;
-+ enable-active-high;
-+ regulator-always-on;
-+ };
-+
-+ kim {
-+ compatible = "kim";
-+ nshutdown_gpio = <343>; /* gpio_ext_74 pin 3 */
-+ /* serial1 */
-+ dev_name = "/dev/ttySC1";
-+ flow_cntrl = <1>;
-+ /* int div 8 hscif@26.6666656MHz */
-+ baud_rate = <3333332>;
-+ };
-+
-+ hdmi-out {
-+ compatible = "hdmi-connector";
-+ type = "a";
-+
-+ port {
-+ hdmi_con: endpoint {
-+ remote-endpoint = <&adv7513_out>;
-+ };
-+ };
-+ };
-+};
-+
-+&pfc {
-+ /delete-node/hscif4;
-+
-+ scif1_pins: scif1 {
-+ groups = "scif1_data_b";
-+ function = "scif1";
-+ };
-+
-+ hscif0_pins: hscif0 {
-+ groups = "hscif0_data", "hscif0_ctrl";
-+ function = "hscif0";
-+ };
-+
-+ hscif1_pins: hscif1 {
-+ groups = "hscif1_data_a", "hscif1_ctrl_a";
-+ function = "hscif1";
-+ };
-+
-+ du_pins: du {
-+ groups = "du_rgb888", "du_sync", "du_clk_out_0", "du_disp";
-+ function = "du";
-+ };
-+};
-+
-+&du {
-+ pinctrl-0 = <&du_pins>;
-+ pinctrl-names = "default";
-+
-+ ports {
-+ port@0 {
-+ endpoint {
-+ remote-endpoint = <&adv7513_in>;
-+ };
-+ };
-+ port@1 {
-+ endpoint {
-+ remote-endpoint = <&rcar_dw_hdmi0_in>;
-+ };
-+ };
-+ };
-+};
-+
-+&gpio0 {
-+ /delete-node/video_a_irq;
-+ /delete-node/video_b_irq;
-+ /delete-node/gpioext_2_20_irq;
-+};
-+
-+&gpio1 {
-+ /delete-node/gpioext_2_21_irq;
-+ /delete-node/wifi_irq;
-+};
-+
-+&gpio2 {
-+ bl_pwm {
-+ gpio-hog;
-+ gpios = <3 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "BL PWM 100%";
-+ };
-+};
-+
-+&gpio5 {
-+ /delete-node/touch_irq;
-+ /delete-node/bt_strap;
-+
-+ /* V1 has h/w bug with swapped RTS and CTS on BT interface */
-+ /* Ignore these pins */
-+ hscif0_cts {
-+ gpio-hog;
-+ gpios = <15 GPIO_ACTIVE_HIGH>;
-+ input;
-+ line-name = "hscif0 CTS";
-+ };
-+
-+ hscif0_rts {
-+ gpio-hog;
-+ gpios = <16 GPIO_ACTIVE_HIGH>;
-+ input;
-+ line-name = "hscif0 RTS";
-+ };
-+};
-+
-+&gpio7 {
-+ /delete-node/gpioext_2_21_irq;
-+};
-+
-+&scif1 {
-+ pinctrl-0 = <&scif1_pins>;
-+ pinctrl-names = "default";
-+
-+ status = "okay";
-+};
-+
-+&hscif0 {
-+ pinctrl-0 = <&hscif0_pins>;
-+ pinctrl-names = "default";
-+ ctsrts;
-+
-+ status = "okay";
-+};
-+
-+&hscif1 {
-+ pinctrl-0 = <&hscif1_pins>;
-+ pinctrl-names = "default";
-+
-+ status = "okay";
-+};
-+
-+&hscif4 {
-+ /delete-property/pinctrl-0;
-+ /delete-property/pinctrl-names;
-+
-+ status = "disabled";
-+};
-+
-+&i2c2 {
-+ /delete-node/pca9535@20;
-+ /delete-node/pca9535@21;
-+
-+ gpio_ext_74: pca9539@74 {
-+ compatible = "nxp,pca9539";
-+ reg = <0x74>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ interrupt-controller;
-+ interrupt-parent = <&gpio6>;
-+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-+
-+ hub_pwen {
-+ gpio-hog;
-+ gpios = <6 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "HUB pwen";
-+ };
-+ hub_rst {
-+ gpio-hog;
-+ gpios = <7 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "HUB rst";
-+ };
-+ otg_offvbus {
-+ gpio-hog;
-+ gpios = <8 GPIO_ACTIVE_HIGH>;
-+ output-low;
-+ line-name = "OTG off VBUSn";
-+ };
-+ otg_extlpn {
-+ gpio-hog;
-+ gpios = <9 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "OTG EXTLPn";
-+ };
-+ otg_stat1 {
-+ gpio-hog;
-+ gpios = <10 GPIO_ACTIVE_HIGH>;
-+ input;
-+ line-name = "OTG Stat1";
-+ };
-+ otg_stat2 {
-+ gpio-hog;
-+ gpios = <11 GPIO_ACTIVE_HIGH>;
-+ input;
-+ line-name = "OTG Stat2";
-+ };
-+ };
-+
-+ gpio_ext_75: pca9539@75 {
-+ compatible = "nxp,pca9539";
-+ reg = <0x75>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ interrupt-controller;
-+ interrupt-parent = <&gpio6>;
-+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
-+
-+ gps_rst {
-+ gpio-hog;
-+ gpios = <6 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "GPS rst";
-+ };
-+ fpdl_shdn {
-+ gpio-hog;
-+ gpios = <9 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "FPDLink shdn";
-+ };
-+ };
-+};
-+
-+&i2cswitch2 {
-+ reg = <0x71>;
-+ reset-gpios= <&gpio5 3 GPIO_ACTIVE_LOW>;
-+
-+ i2c@4 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <4>;
-+
-+ hdmi@3d {
-+ compatible = "adi,adv7511w";
-+ reg = <0x3d>;
-+ interrupt-parent = <&gpio2>;
-+ interrupts = <0 IRQ_TYPE_EDGE_BOTH>;
-+ pd-gpios = <&gpio_ext_75 5 GPIO_ACTIVE_LOW>;
-+
-+ adi,input-depth = <8>;
-+ adi,input-colorspace = "rgb";
-+ adi,input-clock = "1x";
-+ adi,input-style = <1>;
-+ adi,input-justification = "evenly";
-+ adi,clock-delay = <1200>;
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ port@0 {
-+ reg = <0>;
-+ adv7513_in: endpoint {
-+ remote-endpoint = <&du_out_rgb>;
-+ };
-+ };
-+
-+ port@1 {
-+ reg = <1>;
-+ adv7513_out: endpoint {
-+ remote-endpoint = <&hdmi_con>;
-+ };
-+ };
-+ };
-+ };
-+ };
-+};
-+
-+&i2c4 {
-+ /delete-node/pca9535@21;
-+
-+ gpio_ext_76: pca9539@76 {
-+ compatible = "nxp,pca9539";
-+ reg = <0x76>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ interrupt-controller;
-+ interrupt-parent = <&gpio7>;
-+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-+
-+ port_b_a0 {
-+ gpio-hog;
-+ gpios = <0 GPIO_ACTIVE_HIGH>;
-+ output-low;
-+ line-name = "Video-B A0";
-+ };
-+ port_b_a1 {
-+ gpio-hog;
-+ gpios = <1 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-B A1";
-+ };
-+ port_a_a0 {
-+ gpio-hog;
-+ gpios = <2 GPIO_ACTIVE_HIGH>;
-+ output-low;
-+ line-name = "Video-A A0";
-+ };
-+ port_a_a1 {
-+ gpio-hog;
-+ gpios = <3 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-A A1";
-+ };
-+ /* pin 12 - CAM_CLK */
-+ rpi_cam_io_1 {
-+ gpio-hog;
-+ gpios = <10 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "RaspB_IO1";
-+ };
-+ /* pin 11 - CAM_GPIO - assume pwdn */
-+ rpi_cam_io_0 {
-+ gpio-hog;
-+ gpios = <11 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "RaspB_IO0";
-+ };
-+ /* 0 - FPDLink output, 1 - LVDS output */
-+ lvds_vs_fpdl {
-+ gpio-hog;
-+ gpios = <14 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "LVDS switch";
-+ };
-+ };
-+
-+ gpio_ext_77: pca9539@77 {
-+ compatible = "nxp,pca9539";
-+ reg = <0x77>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ interrupt-controller;
-+ interrupt-parent = <&gpio5>;
-+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
-+
-+ mpcie_wake {
-+ gpio-hog;
-+ gpios = <0 GPIO_ACTIVE_HIGH>;
-+ output-low;
-+ line-name = "mPCIe WAKE#";
-+ };
-+ mpcie_wdisable {
-+ gpio-hog;
-+ gpios = <1 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "mPCIe W_DISABLE";
-+ };
-+ mpcie_clreq {
-+ gpio-hog;
-+ gpios = <2 GPIO_ACTIVE_HIGH>;
-+ input;
-+ line-name = "mPCIe CLKREQ#";
-+ };
-+ mpcie_ovc {
-+ gpio-hog;
-+ gpios = <3 GPIO_ACTIVE_HIGH>;
-+ input;
-+ line-name = "mPCIe OVC";
-+ };
-+ };
-+};
-+
-+&i2cswitch4 {
-+ reg = <0x71>;
-+ reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>;
-+};
-+
-+&wlcore {
-+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
-+};
-diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts
-new file mode 100644
-index 0000000..2c50230
---- /dev/null
-+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts
-@@ -0,0 +1,1651 @@
-+/*
-+ * Device Tree Source for the H3ULCB Kingfisher board on r8a7795
-+ *
-+ * Copyright (C) 2017 Renesas Electronics Corp.
-+ * Copyright (C) 2017 Cogent Embedded, Inc.
-+ *
-+ * This file is licensed under the terms of the GNU General Public License
-+ * version 2. This program is licensed "as is" without any warranty of any
-+ * kind, whether express or implied.
-+ */
-+
-+#include "r8a7795-h3ulcb.dts"
-+
-+/ {
-+ model = "Renesas H3ULCB Kingfisher board based on r8a7795";
-+
-+ aliases {
-+ serial1 = &hscif4;
-+ };
-+
-+ snd_clk: snd_clk {
-+ compatible = "fixed-clock";
-+ #clock-cells = <0>;
-+ clock-frequency = <24576000>;
-+ clock-output-names = "scki";
-+ };
-+
-+ wlan_en: regulator@4 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "wlan-en-regulator";
-+
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+
-+ gpio = <&gpio_ext_20 4 GPIO_ACTIVE_HIGH>;
-+ enable-active-high;
-+ };
-+
-+ vcc_sdhi3: regulator@41 {
-+ compatible = "regulator-fixed";
-+
-+ regulator-name = "SDHI3 Vcc";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ vccq_sdhi3: regulator@5 {
-+ compatible = "regulator-fixed";
-+
-+ regulator-name = "SDHI3 VccQ";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ };
-+
-+ codec_en_reg: regulator@6 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "codec-en-regulator";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+
-+ gpio = <&gpio_ext_20 15 0>;
-+
-+ /* delay - CHECK */
-+ startup-delay-us = <70000>;
-+ enable-active-high;
-+ };
-+
-+ amp_en_reg: regulator@7 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "amp-en-regulator";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+
-+ gpio = <&gpio_ext_20 0 0>;
-+
-+ startup-delay-us = <0>;
-+ enable-active-high;
-+ };
-+
-+ lvds_switch: regulator@8 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "lvds_on";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ gpio = <&gpio1 24 0>;
-+ enable-active-high;
-+ regulator-always-on;
-+ };
-+
-+ sdio_switch: regulator@9 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "wifi_on";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ gpio = <&gpio_ext_20 5 0>;
-+ enable-active-low;
-+ regulator-always-on;
-+ };
-+
-+ sound_switch: regulator@10 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "pcm3168a_on";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ gpio = <&gpio_ext_21 5 0>;
-+ enable-active-low;
-+ regulator-always-on;
-+ };
-+
-+ radio_switch: regulator@11 {
-+ compatible = "regulator-fixed";
-+ regulator-name = "radio_on";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ gpio = <&gpio_ext_20 13 GPIO_ACTIVE_HIGH>;
-+ enable-active-high;
-+ regulator-always-on;
-+ };
-+
-+ kim {
-+ compatible = "kim";
-+ nshutdown_gpio = <343>; /* pca9535@i2c2.0x20 pin 3 */
-+ /* serial1 */
-+ dev_name = "/dev/ttySC1";
-+ flow_cntrl = <1>;
-+ /* int div 8 hscif@26.6666656MHz */
-+ baud_rate = <3333332>;
-+ };
-+
-+ btwilink {
-+ compatible = "btwilink";
-+ };
-+
-+ sound_ext: sound@0 {
-+ pinctrl-0 = <&sound_0_pins>;
-+ pinctrl-names = "default";
-+ compatible = "simple-audio-card";
-+
-+ simple-audio-card,format = "left_j";
-+ simple-audio-card,name = "pcm3168a";
-+
-+ simple-audio-card,bitclock-master = <&sound_ext_master>;
-+ simple-audio-card,frame-master = <&sound_ext_master>;
-+ sound_ext_master: simple-audio-card,cpu@0 {
-+ sound-dai = <&rcar_sound 0>;
-+ dai-tdm-slot-num = <8>;
-+ dai-tdm-slot-width = <32>;
-+ };
-+
-+ simple-audio-card,codec@0 {
-+ sound-dai = <&pcm3168a>;
-+ dai-tdm-slot-num = <8>;
-+ dai-tdm-slot-width = <32>;
-+ system-clock-frequency = <24576000>;
-+ };
-+ };
-+
-+ /delete-node/sound;
-+
-+ rsnd_ak4613: sound@1 {
-+ pinctrl-0 = <&sound_1_pins>;
-+ pinctrl-names = "default";
-+ compatible = "simple-audio-card";
-+
-+ simple-audio-card,format = "left_j";
-+ simple-audio-card,name = "ak4613";
-+
-+ simple-audio-card,bitclock-master = <&sndcpu>;
-+ simple-audio-card,frame-master = <&sndcpu>;
-+
-+ sndcpu: simple-audio-card,cpu@1 {
-+ sound-dai = <&rcar_sound 1>;
-+ };
-+
-+ sndcodec: simple-audio-card,codec@1 {
-+ sound-dai = <&ak4613>;
-+ };
-+ };
-+
-+ sound_radio: sound@2 {
-+ pinctrl-0 = <&sound_2_pins>;
-+ pinctrl-names = "default";
-+ compatible = "simple-audio-card";
-+
-+ simple-audio-card,format = "i2s";
-+ simple-audio-card,name = "radio";
-+
-+ simple-audio-card,bitclock-master = <&sound_radio_master>;
-+ simple-audio-card,frame-master = <&sound_radio_master>;
-+ simple-audio-card,cpu@2 {
-+ sound-dai = <&rcar_sound 2>;
-+ };
-+
-+ sound_radio_master: simple-audio-card,codec@2 {
-+ sound-dai = <&radio>;
-+ system-clock-frequency = <12288000>;
-+ };
-+ };
-+
-+ lvds-encoder {
-+ compatible = "thine,thc63lvdm83d";
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ port@0 {
-+ reg = <0>;
-+ lvds_enc_in: endpoint {
-+ remote-endpoint = <&du_out_lvds0>;
-+ };
-+ };
-+ port@1 {
-+ reg = <1>;
-+ lvds_enc_out: endpoint {
-+ remote-endpoint = <&lvds_in>;
-+ };
-+ };
-+ };
-+ };
-+
-+ lvds {
-+ compatible = "lvds-connector";
-+
-+ width-mm = <210>;
-+ height-mm = <158>;
-+
-+ panel-timing {
-+ /* 1280x800 @60Hz */
-+ clock-frequency = <65000000>;
-+ hactive = <1280>;
-+ vactive = <800>;
-+ hsync-len = <40>;
-+ hfront-porch = <80>;
-+ hback-porch = <40>;
-+ vfront-porch = <14>;
-+ vback-porch = <14>;
-+ vsync-len = <4>;
-+ };
-+
-+ port {
-+ lvds_in: endpoint {
-+ remote-endpoint = <&lvds_enc_out>;
-+ };
-+ };
-+ };
-+
-+ radio: si468x@0 {
-+ compatible = "si,si468x-pcm";
-+ status = "okay";
-+
-+ #sound-dai-cells = <0>;
-+ };
-+};
-+
-+&pfc {
-+ hscif4_pins: hscif4 {
-+ groups = "hscif4_data_a", "hscif4_ctrl";
-+ function = "hscif4";
-+ };
-+
-+ sdhi3_pins_3v3: sd3_3v3 {
-+ groups = "sdhi3_data4", "sdhi3_ctrl";
-+ function = "sdhi3";
-+ power-source = <3300>;
-+ };
-+
-+ sound_0_pins: sound0 {
-+ groups = "ssi78_ctrl", "ssi7_data", "ssi8_data";
-+ function = "ssi";
-+ };
-+
-+ sound_1_pins: sound1 {
-+ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
-+ function = "ssi";
-+ };
-+
-+ sound_2_pins: sound2 {
-+ groups = "ssi6_ctrl", "ssi6_data";
-+ function = "ssi";
-+ };
-+
-+ usb0_pins: usb0 {
-+ groups = "usb0";
-+ function = "usb0";
-+ };
-+
-+ can0_pins: can0 {
-+ groups = "can0_data_a";
-+ function = "can0";
-+ };
-+
-+ can1_pins: can1 {
-+ groups = "can1_data";
-+ function = "can1";
-+ };
-+
-+ canfd0_pins: canfd0 {
-+ groups = "canfd0_data_a";
-+ function = "canfd0";
-+ };
-+
-+ canfd1_pins: canfd1 {
-+ groups = "canfd1_data";
-+ function = "canfd1";
-+ };
-+};
-+
-+&gpio0 {
-+ video_a_irq {
-+ gpio-hog;
-+ gpios = <13 GPIO_ACTIVE_HIGH>;
-+ input;
-+ line-name = "Video-A irq";
-+ };
-+
-+ video_b_irq {
-+ gpio-hog;
-+ gpios = <14 GPIO_ACTIVE_HIGH>;
-+ input;
-+ line-name = "Video-B irq";
-+ };
-+
-+ gpioext_2_20_irq {
-+ gpio-hog;
-+ gpios = <15 GPIO_ACTIVE_HIGH>;
-+ input;
-+ line-name = "0x20@i2c2 irq";
-+ };
-+};
-+
-+&gpio1 {
-+ gpioext_2_21_irq {
-+ gpio-hog;
-+ gpios = <15 GPIO_ACTIVE_HIGH>;
-+ input;
-+ line-name = "0x21@i2c2 irq";
-+ };
-+
-+ wifi_irq {
-+ gpio-hog;
-+ gpios = <25 GPIO_ACTIVE_HIGH>;
-+ input;
-+ line-name = "wifi irq";
-+ };
-+};
-+
-+&gpio5 {
-+ touch_irq {
-+ gpio-hog;
-+ gpios = <6 GPIO_ACTIVE_HIGH>;
-+ input;
-+ line-name = "touch irq";
-+ };
-+
-+ /* From TI forum */
-+ /* BT_AUD_OUT should be pulled low when WL_EN is activated. */
-+ /* in case it isn't, wilink8 ends up in one of the test modes that introduces various issues */
-+ bt_strap {
-+ gpio-hog;
-+ gpios = <14 GPIO_ACTIVE_HIGH>;
-+ output-low;
-+ line-name = "BT strap pin";
-+ };
-+};
-+
-+&gpio7 {
-+ gpioext_2_21_irq {
-+ gpio-hog;
-+ gpios = <3 GPIO_ACTIVE_HIGH>;
-+ input;
-+ line-name = "0x21@i2c4 irq";
-+ };
-+};
-+
-+&hscif4 {
-+ pinctrl-0 = <&hscif4_pins>;
-+ pinctrl-names = "default";
-+ ctsrts;
-+
-+ status = "okay";
-+};
-+
-+&i2c2 {
-+ clock-frequency = <400000>;
-+
-+ gpio_ext_20: pca9535@20 {
-+ compatible = "nxp,pca9535";
-+ reg = <0x20>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ interrupt-controller;
-+ interrupt-parent = <&gpio0>;
-+ interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
-+ };
-+
-+ gpio_ext_21: pca9535@21 {
-+ compatible = "nxp,pca9535";
-+ reg = <0x21>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ interrupt-controller;
-+ interrupt-parent = <&gpio1>;
-+ interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
-+ };
-+
-+ i2cswitch2: pca9548@74 {
-+ compatible = "nxp,pca9548";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0x74>;
-+ reset-gpios = <&gpio6 5 GPIO_ACTIVE_LOW>;
-+
-+ i2c@0 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0>;
-+ /* BCM node(s) */
-+ };
-+
-+ i2c@1 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <1>;
-+ /* USB3.0 HUB node(s) */
-+ };
-+
-+ i2c@2 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <2>;
-+ /* Power amp node(s) */
-+ };
-+
-+ i2c@3 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <3>;
-+ /* Radio node(s) */
-+ };
-+
-+ i2c@4 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <4>;
-+ /* A2B node(s) */
-+ };
-+
-+ i2c@5 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <5>;
-+ /* PCIe node(s) */
-+ };
-+
-+ i2c@6 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <6>;
-+ /* LVDS display node(s) */
-+
-+ polytouch: edt-ft5x06@38 {
-+ compatible = "edt,edt-ft5x06";
-+ reg = <0x38>;
-+ interrupt-parent = <&gpio5>;
-+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
-+ };
-+ };
-+
-+ i2c@7 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <7>;
-+ /* Audio, GPS and Gyro node(s) */
-+
-+ pcm3168a: audio-codec@44 {
-+ #sound-dai-cells = <0>;
-+ compatible = "ti,pcm3168a";
-+ reg = <0x44>;
-+ clocks = <&snd_clk>;
-+ clock-names = "scki";
-+ tdm;
-+ VDD1-supply = <&codec_en_reg>;
-+ VDD2-supply = <&codec_en_reg>;
-+ VCCAD1-supply = <&codec_en_reg>;
-+ VCCAD2-supply = <&codec_en_reg>;
-+ VCCDA1-supply = <&amp_en_reg>;
-+ VCCDA2-supply = <&amp_en_reg>;
-+ };
-+
-+ lsm9ds0_acc_mag@1d {
-+ compatible = "st,lsm9ds0_acc_mag";
-+ reg = <0x1d>;
-+ };
-+
-+ lsm9ds0_gyr@6b {
-+ compatible = "st,lsm9ds0-gyro";
-+ reg = <0x6b>;
-+ };
-+
-+ /* GPS@ 0x42 */
-+ };
-+ };
-+};
-+
-+&i2c4 {
-+ gpio_ext_22: pca9535@21 {
-+ compatible = "nxp,pca9535";
-+ reg = <0x22>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ interrupt-controller;
-+ interrupt-parent = <&gpio7>;
-+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-+
-+ /* pin 12 - CAM_CLK */
-+ rpi_cam_io_1 {
-+ gpio-hog;
-+ gpios = <10 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "RaspB_IO1";
-+ };
-+ /* pin 11 - CAM_GPIO - assume pwdn */
-+ rpi_cam_io_0 {
-+ gpio-hog;
-+ gpios = <11 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "RaspB_IO0";
-+ };
-+ };
-+
-+ i2cswitch4: pca9548@74 {
-+ compatible = "nxp,pca9548";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0x74>;
-+ reset-gpios= <&gpio6 21 GPIO_ACTIVE_LOW>;
-+
-+ i2c@0 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0>;
-+ /* SAM node(s) */
-+ };
-+
-+ i2c@1 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <1>;
-+ /* Slot A (CN10) */
-+
-+ ov106xx@0 {
-+ compatible = "ovti,ov106xx";
-+ reg = <0x60>;
-+
-+ port@0 {
-+ ov106xx_in0: endpoint {
-+ clock-lanes = <0>;
-+ data-lanes = <1 2 3 4>;
-+ remote-endpoint = <&vin0ep0>;
-+ };
-+ };
-+ port@1 {
-+ ov106xx_max9286_des0ep0: endpoint@0 {
-+ remote-endpoint = <&max9286_des0ep0>;
-+ };
-+ ov106xx_ti964_des0ep0: endpoint@1 {
-+ remote-endpoint = <&ti964_des0ep0>;
-+ };
-+ ov106xx_ti954_des0ep0: endpoint@2 {
-+ remote-endpoint = <&ti954_des0ep0>;
-+ };
-+ };
-+ };
-+
-+ ov106xx@1 {
-+ compatible = "ovti,ov106xx";
-+ reg = <0x61>;
-+
-+ port@0 {
-+ ov106xx_in1: endpoint {
-+ clock-lanes = <0>;
-+ data-lanes = <1 2 3 4>;
-+ remote-endpoint = <&vin1ep0>;
-+ };
-+ };
-+ port@1 {
-+ ov106xx_max9286_des0ep1: endpoint@0 {
-+ remote-endpoint = <&max9286_des0ep1>;
-+ };
-+ ov106xx_ti964_des0ep1: endpoint@1 {
-+ remote-endpoint = <&ti964_des0ep1>;
-+ };
-+ ov106xx_ti954_des0ep1: endpoint@2 {
-+ remote-endpoint = <&ti954_des0ep1>;
-+ };
-+ };
-+ };
-+
-+ ov106xx@2 {
-+ compatible = "ovti,ov106xx";
-+ reg = <0x62>;
-+
-+ port@0 {
-+ ov106xx_in2: endpoint {
-+ clock-lanes = <0>;
-+ data-lanes = <1 2 3 4>;
-+ remote-endpoint = <&vin2ep0>;
-+ };
-+ };
-+ port@1 {
-+ ov106xx_max9286_des0ep2: endpoint@0 {
-+ remote-endpoint = <&max9286_des0ep2>;
-+ };
-+ ov106xx_ti964_des0ep2: endpoint@1 {
-+ remote-endpoint = <&ti964_des0ep2>;
-+ };
-+ };
-+ };
-+
-+ ov106xx@3 {
-+ compatible = "ovti,ov106xx";
-+ reg = <0x63>;
-+
-+ port@0 {
-+ ov106xx_in3: endpoint {
-+ clock-lanes = <0>;
-+ data-lanes = <1 2 3 4>;
-+ remote-endpoint = <&vin3ep0>;
-+ };
-+ };
-+ port@1 {
-+ ov106xx_max9286_des0ep3: endpoint@0 {
-+ remote-endpoint = <&max9286_des0ep3>;
-+ };
-+ ov106xx_ti964_des0ep3: endpoint@1 {
-+ remote-endpoint = <&ti964_des0ep3>;
-+ };
-+ };
-+ };
-+
-+ /* DS90UB964 @ 0x3a */
-+ ti964-ti9x3@0 {
-+ compatible = "ti,ti964-ti9x3";
-+ reg = <0x3a>;
-+ gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>;
-+ ti,sensor_delay = <350>;
-+ ti,links = <4>;
-+ ti,lanes = <4>;
-+ ti,forwarding-mode = "round-robin";
-+ ti,cable-mode = "coax";
-+
-+ port@0 {
-+ ti964_des0ep0: endpoint@0 {
-+ ti9x3-addr = <0x0c>;
-+ dvp-order = <0>;
-+ remote-endpoint = <&ov106xx_in0>;
-+ };
-+ ti964_des0ep1: endpoint@1 {
-+ ti9x3-addr = <0x0d>;
-+ dvp-order = <0>;
-+ remote-endpoint = <&ov106xx_in1>;
-+ };
-+ ti964_des0ep2: endpoint@2 {
-+ ti9x3-addr = <0x0e>;
-+ dvp-order = <0>;
-+ remote-endpoint = <&ov106xx_in2>;
-+ };
-+ ti964_des0ep3: endpoint@3 {
-+ ti9x3-addr = <0x0f>;
-+ dvp-order = <0>;
-+ remote-endpoint = <&ov106xx_in3>;
-+ };
-+ };
-+ port@1 {
-+ ti964_csi0ep0: endpoint {
-+ csi-rate = <1450>;
-+ remote-endpoint = <&csi2_40_ep>;
-+ };
-+ };
-+ };
-+
-+ /* DS90UB954 @ 0x38 */
-+ ti954-ti9x3@0 {
-+ compatible = "ti,ti954-ti9x3";
-+ reg = <0x38>;
-+ gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>;
-+ ti,sensor_delay = <350>;
-+ ti,links = <2>;
-+ ti,lanes = <4>;
-+ ti,forwarding-mode = "round-robin";
-+ ti,cable-mode = "coax";
-+
-+ port@0 {
-+ ti954_des0ep0: endpoint@0 {
-+ ti9x3-addr = <0x0c>;
-+ dvp-order = <0>;
-+ remote-endpoint = <&ov106xx_in0>;
-+ };
-+ ti954_des0ep1: endpoint@1 {
-+ ti9x3-addr = <0x0d>;
-+ dvp-order = <0>;
-+ remote-endpoint = <&ov106xx_in1>;
-+ };
-+ };
-+ port@1 {
-+ ti954_csi0ep0: endpoint {
-+ csi-rate = <1450>;
-+ remote-endpoint = <&csi2_40_ep>;
-+ };
-+ };
-+ };
-+
-+ /* MAX9286 @ 0x2a */
-+ max9286-max9271@0 {
-+ compatible = "maxim,max9286-max9271";
-+ reg = <0x2a>;
-+ maxim,sensor_delay = <350>;
-+ maxim,links = <4>;
-+ maxim,lanes = <4>;
-+ maxim,resetb-gpio = <1>;
-+ maxim,fsync-mode = "automatic";
-+ maxim,timeout = <100>;
-+
-+ port@0 {
-+ max9286_des0ep0: endpoint@0 {
-+ max9271-addr = <0x50>;
-+ dvp-order = <1>;
-+ remote-endpoint = <&ov106xx_in0>;
-+ };
-+ max9286_des0ep1: endpoint@1 {
-+ max9271-addr = <0x51>;
-+ dvp-order = <1>;
-+ remote-endpoint = <&ov106xx_in1>;
-+ };
-+ max9286_des0ep2: endpoint@2 {
-+ max9271-addr = <0x52>;
-+ dvp-order = <1>;
-+ remote-endpoint = <&ov106xx_in2>;
-+ };
-+ max9286_des0ep3: endpoint@3 {
-+ max9271-addr = <0x53>;
-+ dvp-order = <1>;
-+ remote-endpoint = <&ov106xx_in3>;
-+ };
-+ };
-+ port@1 {
-+ max9286_csi0ep0: endpoint {
-+ csi-rate = <700>;
-+ remote-endpoint = <&csi2_40_ep>;
-+ };
-+ };
-+ };
-+ };
-+
-+ i2c@2 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <2>;
-+ /* Slot B (CN11) */
-+
-+ ov106xx@4 {
-+ compatible = "ovti,ov106xx";
-+ reg = <0x64>;
-+
-+ port@0 {
-+ ov106xx_in4: endpoint {
-+ clock-lanes = <0>;
-+ data-lanes = <1 2 3 4>;
-+ remote-endpoint = <&vin4ep0>;
-+ };
-+ };
-+ port@1 {
-+ ov106xx_max9286_des1ep0: endpoint@0 {
-+ remote-endpoint = <&max9286_des1ep0>;
-+ };
-+ ov106xx_ti964_des1ep0: endpoint@1 {
-+ remote-endpoint = <&ti964_des1ep0>;
-+ };
-+ ov106xx_ti954_des1ep0: endpoint@2 {
-+ remote-endpoint = <&ti954_des1ep0>;
-+ };
-+ };
-+ };
-+
-+ ov106xx@5 {
-+ compatible = "ovti,ov106xx";
-+ reg = <0x65>;
-+
-+ port@0 {
-+ ov106xx_in5: endpoint {
-+ clock-lanes = <0>;
-+ data-lanes = <1 2 3 4>;
-+ remote-endpoint = <&vin5ep0>;
-+ };
-+ };
-+ port@1 {
-+ ov106xx_max9286_des1ep1: endpoint@0 {
-+ remote-endpoint = <&max9286_des1ep1>;
-+ };
-+ ov106xx_ti964_des1ep1: endpoint@1 {
-+ remote-endpoint = <&ti964_des1ep1>;
-+ };
-+ ov106xx_ti954_des1ep1: endpoint@2 {
-+ remote-endpoint = <&ti954_des1ep1>;
-+ };
-+ };
-+ };
-+
-+ ov106xx@6 {
-+ compatible = "ovti,ov106xx";
-+ reg = <0x66>;
-+
-+ port@0 {
-+ ov106xx_in6: endpoint {
-+ clock-lanes = <0>;
-+ data-lanes = <1 2 3 4>;
-+ remote-endpoint = <&vin6ep0>;
-+ };
-+ };
-+ port@1 {
-+ ov106xx_max9286_des1ep2: endpoint@0 {
-+ remote-endpoint = <&max9286_des1ep2>;
-+ };
-+ ov106xx_ti964_des1ep2: endpoint@1 {
-+ remote-endpoint = <&ti964_des1ep2>;
-+ };
-+ };
-+ };
-+
-+ ov106xx@7 {
-+ compatible = "ovti,ov106xx";
-+ reg = <0x67>;
-+
-+ port@0 {
-+ ov106xx_in7: endpoint {
-+ clock-lanes = <0>;
-+ data-lanes = <1 2 3 4>;
-+ remote-endpoint = <&vin7ep0>;
-+ };
-+ };
-+ port@1 {
-+ ov106xx_max9286_des1ep3: endpoint@0 {
-+ remote-endpoint = <&max9286_des1ep3>;
-+ };
-+ ov106xx_ti964_des1ep3: endpoint@1 {
-+ remote-endpoint = <&ti964_des1ep3>;
-+ };
-+ };
-+ };
-+
-+ /* DS90UB964 @ 0x3a */
-+ ti964-ti9x3@1 {
-+ compatible = "ti,ti964-ti9x3";
-+ reg = <0x3a>;
-+ gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>;
-+ ti,sensor_delay = <350>;
-+ ti,links = <4>;
-+ ti,lanes = <4>;
-+ ti,forwarding-mode = "round-robin";
-+ ti,cable-mode = "coax";
-+
-+ port@0 {
-+ ti964_des1ep0: endpoint@0 {
-+ ti9x3-addr = <0x0c>;
-+ dvp-order = <0>;
-+ remote-endpoint = <&ov106xx_in4>;
-+ };
-+ ti964_des1ep1: endpoint@1 {
-+ ti9x3-addr = <0x0d>;
-+ dvp-order = <0>;
-+ remote-endpoint = <&ov106xx_in5>;
-+ };
-+ ti964_des1ep2: endpoint@2 {
-+ ti9x3-addr = <0x0e>;
-+ dvp-order = <0>;
-+ remote-endpoint = <&ov106xx_in6>;
-+ };
-+ ti964_des1ep3: endpoint@3 {
-+ ti9x3-addr = <0x0f>;
-+ dvp-order = <0>;
-+ remote-endpoint = <&ov106xx_in7>;
-+ };
-+ };
-+ port@1 {
-+ ti964_csi2ep0: endpoint {
-+ csi-rate = <1450>;
-+ remote-endpoint = <&csi2_41_ep>;
-+ };
-+ };
-+ };
-+
-+ /* DS90UB954 @ 0x38 */
-+ ti954-ti9x3@1 {
-+ compatible = "ti,ti954-ti9x3";
-+ reg = <0x38>;
-+ gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>;
-+ ti,sensor_delay = <350>;
-+ ti,links = <2>;
-+ ti,lanes = <4>;
-+ ti,forwarding-mode = "round-robin";
-+ ti,cable-mode = "coax";
-+
-+ port@0 {
-+ ti954_des1ep0: endpoint@0 {
-+ ti9x3-addr = <0x0c>;
-+ dvp-order = <0>;
-+ remote-endpoint = <&ov106xx_in4>;
-+ };
-+ ti954_des1ep1: endpoint@1 {
-+ ti9x3-addr = <0x0d>;
-+ dvp-order = <0>;
-+ remote-endpoint = <&ov106xx_in5>;
-+ };
-+ };
-+ port@1 {
-+ ti954_csi2ep0: endpoint {
-+ csi-rate = <1450>;
-+ remote-endpoint = <&csi2_41_ep>;
-+ };
-+ };
-+ };
-+
-+ /* MAX9286 @ 0x2a */
-+ max9286-max9271@1 {
-+ compatible = "maxim,max9286-max9271";
-+ reg = <0x2a>;
-+ maxim,sensor_delay = <350>;
-+ maxim,links = <4>;
-+ maxim,lanes = <4>;
-+ maxim,resetb-gpio = <1>;
-+ maxim,fsync-mode = "automatic";
-+ maxim,timeout = <100>;
-+
-+ port@0 {
-+ max9286_des1ep0: endpoint@0 {
-+ max9271-addr = <0x50>;
-+ dvp-order = <1>;
-+ remote-endpoint = <&ov106xx_in4>;
-+ };
-+ max9286_des1ep1: endpoint@1 {
-+ max9271-addr = <0x51>;
-+ dvp-order = <1>;
-+ remote-endpoint = <&ov106xx_in5>;
-+ };
-+ max9286_des1ep2: endpoint@2 {
-+ max9271-addr = <0x52>;
-+ dvp-order = <1>;
-+ remote-endpoint = <&ov106xx_in6>;
-+ };
-+ max9286_des1ep3: endpoint@3 {
-+ max9271-addr = <0x53>;
-+ dvp-order = <1>;
-+ remote-endpoint = <&ov106xx_in7>;
-+ };
-+ };
-+ port@1 {
-+ max9286_csi2ep0: endpoint {
-+ csi-rate = <700>;
-+ remote-endpoint = <&csi2_41_ep>;
-+ };
-+ };
-+ };
-+ };
-+
-+ i2c@6 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <6>;
-+ /* Slot B (CN11) */
-+
-+ video_b_ext0: pca9535@27 {
-+ compatible = "nxp,pca9535";
-+ reg = <0x27>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+
-+ video_b_des_cfg1 {
-+ gpio-hog;
-+ gpios = <5 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-B cfg1";
-+ };
-+ video_b_des_cfg0 {
-+ gpio-hog;
-+ gpios = <6 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-B cfg0";
-+ };
-+ video_b_pwr_shdn {
-+ gpio-hog;
-+ gpios = <3 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-B PWR_SHDN";
-+ };
-+ video_b_cam_pwr0 {
-+ gpio-hog;
-+ gpios = <12 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-B PWR0";
-+ };
-+ video_b_cam_pwr1 {
-+ gpio-hog;
-+ gpios = <13 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-B PWR1";
-+ };
-+ video_b_cam_pwr2 {
-+ gpio-hog;
-+ gpios = <14 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-B PWR2";
-+ };
-+ video_b_cam_pwr3 {
-+ gpio-hog;
-+ gpios = <15 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-B PWR3";
-+ };
-+ video_b_des_shdn {
-+ gpio-hog;
-+ gpios = <4 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-B DES_SHDN";
-+ };
-+ video_b_des_led {
-+ gpio-hog;
-+ gpios = <7 GPIO_ACTIVE_HIGH>;
-+ output-low;
-+ line-name = "Video-B led";
-+ };
-+ };
-+
-+ video_b_ext1: max7325@5c {
-+ compatible = "maxim,max7325";
-+ reg = <0x5c>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+
-+ video_b_des_cfg2 {
-+ gpio-hog;
-+ gpios = <4 GPIO_ACTIVE_HIGH>;
-+ output-low;
-+ line-name = "Video-B cfg2";
-+ };
-+ video_b_des_cfg1 {
-+ gpio-hog;
-+ gpios = <6 GPIO_ACTIVE_HIGH>;
-+ output-low;
-+ line-name = "Video-B cfg1";
-+ };
-+ video_b_des_cfg0 {
-+ gpio-hog;
-+ gpios = <7 GPIO_ACTIVE_HIGH>;
-+ output-low;
-+ line-name = "Video-B cfg0";
-+ };
-+ video_b_pwr_shdn {
-+ gpio-hog;
-+ gpios = <14 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-B PWR_SHDN";
-+ };
-+ video_b_cam_pwr0 {
-+ gpio-hog;
-+ gpios = <8 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-B PWR0";
-+ };
-+ video_b_cam_pwr1 {
-+ gpio-hog;
-+ gpios = <9 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-B PWR1";
-+ };
-+ video_b_cam_pwr3 {
-+ gpio-hog;
-+ gpios = <11 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-B PWR3";
-+ };
-+ };
-+ };
-+
-+ i2c@7 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <7>;
-+ /* Slot A (CN10) */
-+
-+ video_a_ext0: pca9535@26 {
-+ compatible = "nxp,pca9535";
-+ reg = <0x26>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+
-+ video_a_des_cfg1 {
-+ gpio-hog;
-+ gpios = <5 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-A cfg1";
-+ };
-+ video_a_des_cfg0 {
-+ gpio-hog;
-+ gpios = <6 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-A cfg0";
-+ };
-+ video_a_pwr_shdn {
-+ gpio-hog;
-+ gpios = <3 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-A PWR_SHDN";
-+ };
-+ video_a_cam_pwr0 {
-+ gpio-hog;
-+ gpios = <12 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-A PWR0";
-+ };
-+ video_a_cam_pwr1 {
-+ gpio-hog;
-+ gpios = <13 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-A PWR1";
-+ };
-+ video_a_cam_pwr2 {
-+ gpio-hog;
-+ gpios = <14 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-A PWR2";
-+ };
-+ video_a_cam_pwr3 {
-+ gpio-hog;
-+ gpios = <15 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-A PWR3";
-+ };
-+ video_a_des_shdn {
-+ gpio-hog;
-+ gpios = <4 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-A DES_SHDN";
-+ };
-+ video_a_des_led {
-+ gpio-hog;
-+ gpios = <7 GPIO_ACTIVE_HIGH>;
-+ output-low;
-+ line-name = "Video-A led";
-+ };
-+ };
-+
-+ video_a_ext1: max7325@5c {
-+ compatible = "maxim,max7325";
-+ reg = <0x5c>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+
-+ video_a_des_cfg2 {
-+ gpio-hog;
-+ gpios = <4 GPIO_ACTIVE_HIGH>;
-+ output-low;
-+ line-name = "Video-A cfg2";
-+ };
-+ video_a_des_cfg1 {
-+ gpio-hog;
-+ gpios = <6 GPIO_ACTIVE_HIGH>;
-+ output-low;
-+ line-name = "Video-A cfg1";
-+ };
-+ video_a_des_cfg0 {
-+ gpio-hog;
-+ gpios = <7 GPIO_ACTIVE_HIGH>;
-+ output-low;
-+ line-name = "Video-A cfg0";
-+ };
-+ video_a_pwr_shdn {
-+ gpio-hog;
-+ gpios = <14 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-A PWR_SHDN";
-+ };
-+ video_a_cam_pwr0 {
-+ gpio-hog;
-+ gpios = <8 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-A PWR0";
-+ };
-+ video_a_cam_pwr1 {
-+ gpio-hog;
-+ gpios = <9 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-A PWR1";
-+ };
-+ video_a_cam_pwr3 {
-+ gpio-hog;
-+ gpios = <11 GPIO_ACTIVE_HIGH>;
-+ output-high;
-+ line-name = "Video-A PWR3";
-+ };
-+ };
-+ };
-+ };
-+};
-+
-+&pcie_bus_clk {
-+ clock-frequency = <100000000>;
-+ status = "okay";
-+};
-+
-+&pciec0 {
-+ status = "okay";
-+};
-+
-+&pciec1 {
-+ status = "okay";
-+};
-+
-+&vin0 {
-+ status = "okay";
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ port@0 {
-+ vin0ep0: endpoint {
-+ csi,select = "csi40";
-+ virtual,channel = <0>;
-+ data-lanes = <1 2 3 4>;
-+ remote-endpoint = <&ov106xx_in0>;
-+ };
-+ };
-+ port@1 {
-+ csi0ep0: endpoint {
-+ remote-endpoint = <&csi2_40_ep>;
-+ };
-+ };
-+ port@2 {
-+ vin0_max9286_des0ep0: endpoint@0 {
-+ remote-endpoint = <&max9286_des0ep0>;
-+ };
-+ vin0_ti964_des0ep0: endpoint@1 {
-+ remote-endpoint = <&ti964_des0ep0>;
-+ };
-+ vin0_ti954_des0ep0: endpoint@2 {
-+ remote-endpoint = <&ti954_des0ep0>;
-+ };
-+ };
-+ };
-+};
-+
-+&vin1 {
-+ status = "okay";
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ port@0 {
-+ vin1ep0: endpoint {
-+ csi,select = "csi40";
-+ virtual,channel = <1>;
-+ data-lanes = <1 2 3 4>;
-+ remote-endpoint = <&ov106xx_in1>;
-+ };
-+ };
-+ port@1 {
-+ csi0ep1: endpoint {
-+ remote-endpoint = <&csi2_40_ep>;
-+ };
-+ };
-+ port@2 {
-+ vin1_max9286_des0ep1: endpoint@0 {
-+ remote-endpoint = <&max9286_des0ep1>;
-+ };
-+ vin1_ti964_des0ep1: endpoint@1 {
-+ remote-endpoint = <&ti964_des0ep1>;
-+ };
-+ vin1_ti954_des0ep1: endpoint@2 {
-+ remote-endpoint = <&ti954_des0ep1>;
-+ };
-+ };
-+ };
-+};
-+
-+&vin2 {
-+ status = "okay";
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ port@0 {
-+ vin2ep0: endpoint {
-+ csi,select = "csi40";
-+ virtual,channel = <2>;
-+ data-lanes = <1 2 3 4>;
-+ remote-endpoint = <&ov106xx_in2>;
-+ };
-+ };
-+ port@1 {
-+ csi0ep2: endpoint {
-+ remote-endpoint = <&csi2_40_ep>;
-+ };
-+ };
-+ port@2 {
-+ vin2_max9286_des0ep2: endpoint@0 {
-+ remote-endpoint = <&max9286_des0ep2>;
-+ };
-+ vin2_ti964_des0ep2: endpoint@1 {
-+ remote-endpoint = <&ti964_des0ep2>;
-+ };
-+ };
-+ };
-+};
-+
-+&vin3 {
-+ status = "okay";
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ port@0 {
-+ vin3ep0: endpoint {
-+ csi,select = "csi40";
-+ virtual,channel = <3>;
-+ data-lanes = <1 2 3 4>;
-+ remote-endpoint = <&ov106xx_in3>;
-+ };
-+ };
-+ port@1 {
-+ csi0ep3: endpoint {
-+ remote-endpoint = <&csi2_40_ep>;
-+ };
-+ };
-+ port@2 {
-+ vin3_max9286_des0ep3: endpoint@0 {
-+ remote-endpoint = <&max9286_des0ep3>;
-+ };
-+ vin3_ti964_des0ep3: endpoint@1 {
-+ remote-endpoint = <&ti964_des0ep3>;
-+ };
-+ };
-+ };
-+};
-+
-+&vin4 {
-+ status = "okay";
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ port@0 {
-+ vin4ep0: endpoint {
-+ csi,select = "csi41";
-+ virtual,channel = <0>;
-+ remote-endpoint = <&ov106xx_in4>;
-+ data-lanes = <1 2 3 4>;
-+ };
-+ };
-+ port@1 {
-+ csi2ep0: endpoint {
-+ remote-endpoint = <&csi2_41_ep>;
-+ };
-+ };
-+ port@2 {
-+ vin4_max9286_des1ep0: endpoint@0 {
-+ remote-endpoint = <&max9286_des1ep0>;
-+ };
-+ vin4_ti964_des1ep0: endpoint@1 {
-+ remote-endpoint = <&ti964_des1ep0>;
-+ };
-+ vin4_ti954_des1ep0: endpoint@2 {
-+ remote-endpoint = <&ti954_des1ep0>;
-+ };
-+ };
-+ };
-+};
-+
-+&vin5 {
-+ status = "okay";
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ port@0 {
-+ vin5ep0: endpoint@0 {
-+ csi,select = "csi41";
-+ virtual,channel = <1>;
-+ remote-endpoint = <&ov106xx_in5>;
-+ data-lanes = <1 2 3 4>;
-+ };
-+ };
-+ port@1 {
-+ csi2ep1: endpoint {
-+ remote-endpoint = <&csi2_41_ep>;
-+ };
-+ };
-+ port@2 {
-+ vin5_max9286_des1ep1: endpoint@0 {
-+ remote-endpoint = <&max9286_des1ep1>;
-+ };
-+ vin5_ti964_des1ep1: endpoint@1 {
-+ remote-endpoint = <&ti964_des1ep1>;
-+ };
-+ vin5_ti954_des1ep1: endpoint@2 {
-+ remote-endpoint = <&ti954_des1ep1>;
-+ };
-+ };
-+ };
-+};
-+
-+&vin6 {
-+ status = "okay";
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ port@0 {
-+ vin6ep0: endpoint@0 {
-+ csi,select = "csi41";
-+ virtual,channel = <2>;
-+ remote-endpoint = <&ov106xx_in6>;
-+ data-lanes = <1 2 3 4>;
-+ };
-+ };
-+ port@1 {
-+ csi2ep2: endpoint {
-+ remote-endpoint = <&csi2_41_ep>;
-+ };
-+ };
-+ port@2 {
-+ vin6_max9286_des1ep2: endpoint@0 {
-+ remote-endpoint = <&max9286_des1ep2>;
-+ };
-+ vin6_ti964_des1ep2: endpoint@1 {
-+ remote-endpoint = <&ti964_des1ep2>;
-+ };
-+ };
-+ };
-+};
-+
-+&vin7 {
-+ status = "okay";
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ port@0 {
-+ vin7ep0: endpoint@0 {
-+ csi,select = "csi41";
-+ virtual,channel = <3>;
-+ remote-endpoint = <&ov106xx_in7>;
-+ data-lanes = <1 2 3 4>;
-+ };
-+ };
-+ port@1 {
-+ csi2ep3: endpoint {
-+ remote-endpoint = <&csi2_41_ep>;
-+ };
-+ };
-+ port@2 {
-+ vin7_max9286_des1ep3: endpoint@0 {
-+ remote-endpoint = <&max9286_des1ep3>;
-+ };
-+ vin7_ti964_des1ep3: endpoint@1 {
-+ remote-endpoint = <&ti964_des1ep3>;
-+ };
-+ };
-+ };
-+};
-+
-+&csi2_40 {
-+ status = "okay";
-+
-+ virtual,channel {
-+ csi2_vc0 {
-+ data,type = "ycbcr422";
-+ receive,vc = <0>;
-+ };
-+ csi2_vc1 {
-+ data,type = "ycbcr422";
-+ receive,vc = <1>;
-+ };
-+ csi2_vc2 {
-+ data,type = "ycbcr422";
-+ receive,vc = <2>;
-+ };
-+ csi2_vc3 {
-+ data,type = "ycbcr422";
-+ receive,vc = <3>;
-+ };
-+ };
-+
-+ port {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ csi2_40_ep: endpoint {
-+ clock-lanes = <0>;
-+ data-lanes = <1 2 3 4>;
-+ csi-rate = <300>;
-+ };
-+ };
-+};
-+
-+&csi2_41 {
-+ status = "okay";
-+
-+ virtual,channel {
-+ csi2_vc0 {
-+ data,type = "ycbcr422";
-+ receive,vc = <0>;
-+ };
-+ csi2_vc1 {
-+ data,type = "ycbcr422";
-+ receive,vc = <1>;
-+ };
-+ csi2_vc2 {
-+ data,type = "ycbcr422";
-+ receive,vc = <2>;
-+ };
-+ csi2_vc3 {
-+ data,type = "ycbcr422";
-+ receive,vc = <3>;
-+ };
-+ };
-+
-+ port {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ csi2_41_ep: endpoint {
-+ clock-lanes = <0>;
-+ data-lanes = <1 2 3 4>;
-+ csi-rate = <300>;
-+ };
-+ };
-+};
-+
-+&rcar_sound {
-+ pinctrl-0 = <&sound_clk_pins>;
-+
-+ /* Multi DAI */
-+ #sound-dai-cells = <1>;
-+
-+ rcar_sound,dai {
-+ dai0 {
-+ playback = <&ssi7>;
-+ capture = <&ssi8>;
-+ };
-+
-+ dai1 {
-+ playback = <&ssi0 &src0 &dvc0>;
-+ capture = <&ssi1 &src1 &dvc1>;
-+ };
-+
-+ dai2 {
-+ capture = <&ssi6>;
-+ };
-+ };
-+};
-+
-+&sdhi3 {
-+ pinctrl-0 = <&sdhi3_pins_3v3>;
-+ pinctrl-names = "default";
-+
-+ vmmc-supply = <&wlan_en>;
-+ vqmmc-supply = <&vccq_sdhi3>;
-+ keep-power-in-suspend;
-+ enable-sdio-wakeup;
-+ bus-width = <4>;
-+ no-1-8-v;
-+ non-removable;
-+ cap-power-off-card;
-+ max-frequency = <26000000>;
-+ status = "okay";
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ wlcore: wlcore@2 {
-+ compatible = "ti,wl1837";
-+ reg = <2>;
-+ interrupt-parent = <&gpio1>;
-+ interrupts = <25 IRQ_TYPE_EDGE_RISING>;
-+ };
-+};
-+
-+&usb2_phy0 {
-+ pinctrl-0 = <&usb0_pins>;
-+ pinctrl-names = "default";
-+
-+ status = "okay";
-+};
-+
-+&ehci0 {
-+ status = "okay";
-+};
-+
-+&ohci0 {
-+ status = "okay";
-+};
-+
-+&xhci0 {
-+ status = "okay";
-+};
-+
-+&msiof1 {
-+ status = "disabled";
-+};
-+
-+&can0 {
-+ pinctrl-0 = <&can0_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+
-+ renesas,can-clock-select = <0x0>;
-+};
-+
-+&can1 {
-+ pinctrl-0 = <&can1_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+
-+ renesas,can-clock-select = <0x0>;
-+};
-+
-+&canfd {
-+ pinctrl-0 = <&canfd0_pins &canfd1_pins>;
-+ pinctrl-names = "default";
-+ status = "disabled";
-+
-+ channel0 {
-+ status = "okay";
-+ };
-+
-+ channel1 {
-+ status = "okay";
-+ };
-+};
-+
-+/* uncomment to enable CN48 on VIN4 */
-+//#include "ulcb-kf-rpi.dtsi"
-+/* uncomment to enable CN47: SD on SDHI3 */
-+//#include "ulcb-kf-sd3.dtsi"
---
-1.9.1
-