diff options
Diffstat (limited to 'meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas')
3 files changed, 89 insertions, 7 deletions
diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0001-arm64-dts-renesas-disable-r8a7796-hscif0-dma.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0001-arm64-dts-renesas-disable-r8a7796-hscif0-dma.patch new file mode 100644 index 0000000..31a66b7 --- /dev/null +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0001-arm64-dts-renesas-disable-r8a7796-hscif0-dma.patch @@ -0,0 +1,34 @@ +From 9f2cf209ef8235f33683ca941fd0d7bdcca4078d Mon Sep 17 00:00:00 2001 +From: Matt Porter <mporter@konsulko.com> +Date: Sun, 17 Dec 2017 21:44:41 -0500 +Subject: [PATCH] arm64: dts: renesas: disable r8a7796 hscif0 dma + +When streaming A2DP audio on WiLink8, DMA errors are +seen from the rcar-dmac driver servicing hscif0. As +a result, data corruption is seen by the UIM service +managing the link to the Wilink8 device. This data +corruption manifests as dropped frames and audibly as +"skips" in the audio playback. + +Workaround this issue by disabling DMA for hscif0. + +Signed-off-by: Matt Porter <mporter@konsulko.com> +--- + arch/arm64/boot/dts/renesas/r8a7796.dtsi | 1 - + 1 file changed, 1 deletion(-) + +diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi +index e3a5c25bc3da..dd97af4bdd60 100644 +--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi ++++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi +@@ -1282,7 +1282,6 @@ + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>; +- dma-names = "tx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + status = "disabled"; + }; +-- +2.11.0 + diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0001-arm64-dts-renesas-preserve-drm-HDMI-connector-naming.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0001-arm64-dts-renesas-preserve-drm-HDMI-connector-naming.patch new file mode 100644 index 0000000..4f87f30 --- /dev/null +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0001-arm64-dts-renesas-preserve-drm-HDMI-connector-naming.patch @@ -0,0 +1,54 @@ +From df5348a8ec6f611fe3fc51d7c12898b8830d89d3 Mon Sep 17 00:00:00 2001 +From: Matt Porter <mporter@konsulko.com> +Date: Wed, 13 Dec 2017 12:49:20 -0500 +Subject: [PATCH] arm64: dts: renesas: preserve drm HDMI connector naming on KF + +Kingfisher adds encoders on ports 0 and 2 of the R-Car +display unit. The bare ULCB SK has only an HDMI encoder +in use on port 1. When the system is booted with an SK +dtb, port 1's HDMI encoder is assigned as HDMI-A-1 because +it is the first (and only) encoder present. When booting +a KF dtb, port 0's HDMI encoder preceeds port1 in the dtb due +to incremental ordering of the endpoint port nodes. This causes +the KF HDMI to be assigned HDMI-A-1 and the SK HDMI to be assigned +as HDMI-A-2. In order to preserve the SK's HDMI output naming as +connector HDMI-A-1, reorder the endpoint port nodes so that port1 +is first. + +Change-Id: Ibbb1975c2383a526a54c257fb7d68d32a042d468 +Signed-off-by: Matt Porter <mporter@konsulko.com> +--- + arch/arm64/boot/dts/renesas/r8a7796.dtsi | 10 +++++----- + 1 file changed, 5 insertions(+), 5 deletions(-) + +diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi +index bf37b8aa0e2f..e3a5c25bc3da 100644 +--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi ++++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi +@@ -2391,11 +2391,6 @@ + #address-cells = <1>; + #size-cells = <0>; + +- port@0 { +- reg = <0>; +- du_out_rgb: endpoint { +- }; +- }; + port@1 { + reg = <1>; + du_out_hdmi0: endpoint { +@@ -2406,6 +2401,11 @@ + du_out_lvds0: endpoint { + }; + }; ++ port@0 { ++ reg = <0>; ++ du_out_rgb: endpoint { ++ }; ++ }; + }; + }; + +-- +2.11.0 + diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/ulcb.cfg b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/ulcb.cfg index 2714452..a821c24 100644 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/ulcb.cfg +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/ulcb.cfg @@ -71,13 +71,6 @@ CONFIG_DRM_I2C_ADV7511=y CONFIG_TOUCHSCREEN_EDT_FT5X06=y CONFIG_SERIAL_SH_SCI_DMA=y CONFIG_STAGING=y -CONFIG_MOST=y -CONFIG_MOSTCORE=y -CONFIG_AIM_CDEV=y -CONFIG_AIM_NETWORK=y -CONFIG_AIM_SOUND=y -CONFIG_AIM_V4L2=y -CONFIG_HDM_DIM2=y CONFIG_UIO=y CONFIG_SENSORS_EMC2103=y CONFIG_PMBUS=y @@ -87,3 +80,4 @@ CONFIG_SENSORS_LM63=y CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_RAID0=y +CONFIG_MMC_SDHI_SEQ_WORKAROUND=y |