diff options
Diffstat (limited to 'meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas')
9 files changed, 1128 insertions, 51 deletions
diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0025-drm-adv7511-Enable-HPD-interrupts-to-support-hotplug.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0025-drm-adv7511-Enable-HPD-interrupts-to-support-hotplug.patch new file mode 100644 index 0000000..dc29695 --- /dev/null +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0025-drm-adv7511-Enable-HPD-interrupts-to-support-hotplug.patch @@ -0,0 +1,46 @@ +From 0ec0f782c0d19b1e1293e8e281c335186ce3f3cc Mon Sep 17 00:00:00 2001 +From: Vladimir Barinov <vladimir.barinov@cogentembedded.com> +Date: Tue, 30 May 2017 17:41:21 +0300 +Subject: [PATCH] drm: adv7511: Enable HPD interrupts to support hotplug + +This patch enables HPD (hot plug detect) interrupt support + +Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> +--- + drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c +index a104b43..e20f475 100644 +--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c ++++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c +@@ -55,7 +55,7 @@ static const struct reg_sequence adv7511_fixed_registers[] = { + { 0x98, 0x03 }, + { 0x9a, 0xe0 }, + { 0x9c, 0x30 }, +- { 0x9d, 0x61 }, ++ { 0x9d, 0x01 }, + { 0xa2, 0xa4 }, + { 0xa3, 0xa4 }, + { 0xe0, 0xd0 }, +@@ -369,7 +369,7 @@ static void adv7511_power_on(struct adv7511 *adv7511) + * Still, let's be safe and stick to the documentation. + */ + regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(0), +- ADV7511_INT0_EDID_READY); ++ ADV7511_INT0_EDID_READY | ADV7511_INT0_HPD); + regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(1), + ADV7511_INT1_DDC_ERROR); + } +@@ -575,7 +575,7 @@ static int adv7511_get_modes(struct adv7511 *adv7511, + ADV7511_POWER_POWER_DOWN, 0); + if (adv7511->i2c_main->irq) { + regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(0), +- ADV7511_INT0_EDID_READY); ++ ADV7511_INT0_EDID_READY | ADV7511_INT0_HPD); + regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(1), + ADV7511_INT1_DDC_ERROR); + } +-- +1.9.1 + diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0026-drm-adv7511-add-polling-mode-when-no-irq-available.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0026-drm-adv7511-add-polling-mode-when-no-irq-available.patch new file mode 100644 index 0000000..3adfa21 --- /dev/null +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0026-drm-adv7511-add-polling-mode-when-no-irq-available.patch @@ -0,0 +1,30 @@ +From 06473f51a6aa077cd56745bd14d114ff3269fe19 Mon Sep 17 00:00:00 2001 +From: Andrey Gusakov <andrey.gusakov@cogentembedded.com> +Date: Tue, 30 May 2017 18:42:09 +0300 +Subject: [PATCH] drm: adv7511: add polling mode (when no irq available) + +Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> +--- + drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 6 +++++- + 1 file changed, 5 insertions(+), 1 deletion(-) + +diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c +index a104b43b56a0..8be1baca05d0 100644 +--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c ++++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c +@@ -838,7 +838,11 @@ static int adv7511_bridge_attach(struct drm_bridge *bridge) + return -ENODEV; + } + +- adv->connector.polled = DRM_CONNECTOR_POLL_HPD; ++ if (adv->i2c_main->irq) ++ adv->connector.polled = DRM_CONNECTOR_POLL_HPD; ++ else ++ adv->connector.polled = DRM_CONNECTOR_POLL_CONNECT | ++ DRM_CONNECTOR_POLL_DISCONNECT; + + ret = drm_connector_init(bridge->dev, &adv->connector, + &adv7511_connector_funcs, +-- +2.13.0 + diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0027-usb-host-xhci-plat-add-firmware-for-the-R-Car-M3-W-x.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0027-usb-host-xhci-plat-add-firmware-for-the-R-Car-M3-W-x.patch new file mode 100644 index 0000000..dc79798 --- /dev/null +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0027-usb-host-xhci-plat-add-firmware-for-the-R-Car-M3-W-x.patch @@ -0,0 +1,179 @@ +From b0668886def608d352cd0263a7ef04e64e25574a Mon Sep 17 00:00:00 2001 +From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> +Date: Tue, 12 Apr 2016 16:28:44 +0900 +Subject: [PATCH] usb: host: xhci-plat: add firmware for the R-Car M3-W xHCI + controllers + +This patch adds a firmware for the USB 3.0 host controllers of Renesas +R-Car M3-W SoC. + + - This firmware is possible to be used on R-Car H2 and M2. However, + this version causes performance degradation on such SoCs. + - This firmware is impossible to be used on R-Car H3 because data + transfer might not work correctly. + +So, we would like to keep the v1 and v2 firmware. + +Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> +Signed-off-by: Kyle McMartin <kyle@kernel.org> +--- + firmware/WHENCE | 3 ++- + firmware/r8a779x_usb3_v3.dlmem | Bin 0 -> 9472 bytes + 2 files changed, 2 insertions(+), 1 deletion(-) + create mode 100644 r8a779x_usb3_v3.dlmem + +diff --git a/firmware/WHENCE b/firmware/WHENCE +index c2d83f4..02b46c7 100644 +--- a/firmware/WHENCE ++++ b/firmware/WHENCE +@@ -2922,10 +2922,11 @@ Licence: + + -------------------------------------------------------------------------- + +-Driver: xhci-rcar -- Renesas R-Car H2/M2/H3 USB 3.0 host controller driver ++Driver: xhci-rcar -- Renesas R-Car Gen2/3 USB 3.0 host controller driver + + File: r8a779x_usb3_v1.dlmem + File: r8a779x_usb3_v2.dlmem ++File: r8a779x_usb3_v3.dlmem + + Licence: Redistributable. See LICENCE.r8a779x_usb3 for details. + +diff --git a/firmware/r8a779x_usb3_v3.dlmem b/firmware/r8a779x_usb3_v3.dlmem +new file mode 100644 +index 0000000000000000000000000000000000000000..eac36a96bee1a8614eef9caa88e5a9de136af30c +GIT binary patch +literal 9472 +zcmai44O~=J+J9z-JD0DE%!QeY<mgB<W~{cz`bjBB=$cutpn@Ny@*$Ox*>2nRwwB{K +zD4Ci1rfYs>HkeYmO5m31jV34~)&K>O6o(P~7+pbD-BR(s|8ob#ecSi9{C@v?&b{~C +z=R9BMInQ~9;u*j3Mp7NIzY7#;Wi4;XjLuOsWLNsr{b*C7mr~CYucqgTozEhh{^R~y +z;vS+T2HOp?$LiOfB6?v)tUmHIQGg^i{2qOuk!V3ieSzE5L0Y{>@tLiXt@SPOBxf;E +zcrN-@$=L9oxZiARx2;Ij7m}7V@vjlZ%gTD4C)LZbUMqSBIZC^3^pDz$QG`+K+il|K +zoUE)CDx}B;>vpN(*eD`dshO-vOVTf;lBi+&&3%Xx^|@h0OUc1_f4i^UdWA?Am#Du6 +zN-vUarO`e}U&H23NYn>vw6vJa9UQ0O#=ag%y4R9SWH%TEW028$gSvva0iw=m`=i-@ +z|0oUh7jq>;W}<!^zFI`dn3L&8e?eA4h1W7P#JG_8V8Lp#NU?g_s_0f3a`}OhR)1M} +zL$KbkNSYBk&LKV}a>k{QXrMIFP-14!wKIal-C~6yJ8`HKY|@a<Xw7&~@}_>l<?=QO +zdIY^I_*2JZ43+#duTbaq;Qg%3;F-(B{etJ>dci7j(9}uJ-_~}8Ol5ox(>FZatD9fi +zHHEJcG-8TWD>&P0g)CnS=N58&wL+&*X0$643HCADmA#SI1-oL>RN|VTE#vIUe4Sl6 +z5LwA-U^}hkOso~U#&n*J(UYOLSUZM2Z8Tl4XB@COWn~lWTcwV^g1dx%va;gtlT+}< +z(E)a4XTX5?FO@@gWM$#qcjeHR(BKd+8fE2ZGHla8MoYSKb+SQYWRfyJvu@Wk99u~k +z`FTUG)Db8vv3I|>li#0iYyDm)D`9uv<zn83fI<3Js}?+6FndxvG0PQg52q>J-;UP# +zebKXWzJ^Kmicyo6l2If0rE7^}d{Et6;vR6sc&$}!P$0f9ShrKdF^PF=aEe{=QvLI? +z5<ST(T|D6wYr99U!<>WqTP01yCir>9m)ZtKZwustPX^?o?;pR1)71GTUI$yVc}{Yk +z+JjgbP5o`{`yGk;X7I^Y412d{gs0Xwf@x%#__NI^{Ugw0IB3)OZ18h!a|P8K&2cNh +z*RDobScrv}KYU(;H53z|r6sU>6<4wHvxXvJypMUAHf@=R`O|zCPqZ;_`8lxS?a&5K +zZ4+jnZLuqEU6NjjQ@u-F;|oEBt#MiT9i(eE_V|GdewHO3G&-eOtsX<CAS<28w)W@k +ziTcg>0=#eU({OA6Q3_wH`g4JJk*j#1q`|JNr}_!D_Rk?@g*wuc>c-stql(62J+(p? +z0*fNe5w`ZPFy?|fhWU2UQ1-r1jUZEFSY&!b?N3qrtJHpjRaSmdW!A(WR-U}WzE}o| +zer}uKUw*DC-U|gMgVgojD{DIE_YPUfhOCQBOjb1pwfBWwFX62&?zL`Da@-xe+9WHb +zCKg?6?PexF-Y|VxC4YQrfgKqa%b<rbtxoYPthu#R*{y>k>S(_XRz+<XYiqBE)ShnY +zwsynvMEzxTj7$0_vpl|@gcVk*b>co-blCjQtIV>JKOxv7E8~XQ+FL*)M$h=LwO>X5 +zA+;|nuf}^?I-%|42`om-%C#Y|_B}Gr#JFA=^Ki#(50CaCHgOd^`QW1_wsvP4lhVT} +z*f0y4ik5n%-_$+pCk2UmS9hOjucVu@tUP(o=x@{!J#lz|2+El}B6kSlH~L+i5pnbe +zUF3{BYa2MD-slk52?G$vxdyfi`u}Y08q5*N`z2=k!(~KxE%t}O-OmQ%{cyGK_uzqa +zSgF2cG1c(a8=v*DN7~aBW!ZGc^yQHjQ$Moahzi^n5s<cjnocZ<_%uQ@yL3+3v}Ku= +z^dsb$ZkfAQvpmx>H<z551=CjqtPHTE-=so3AEJ39a~0Z1dJ|*Ib*rayX`82QnWoR) +zniI5e+jHCJyf<yfwD)s@XYZV2nHx?Y%+bzv%_*9*E8@e5-4T1{6wmo6;^T-<BKA)E +z%bX;Aq8f1_w<pDD*{F1+85}0kO@PM3qS#upwLbyx2oCi7+wQ1;^;avNGh4b4F|x!} +z*vq+wt>Sk^#G*h|dt#6Fh{lUgiyOQABldGC{67$R18wk1cvYsY*SasObFpzr>7<)% +zaD$gY(YWt&h%Mdgd|lTDq4$g3>KDwyy(>xX=1f**4)Ub3$kRMXR-zv0{i^xyS9X3N +z)>7Dmp41YIJ09Dk6<hl-WFYz=CcEF4bL0J%ZCOlpEV9iAR3qfkIGwh6xXvn-`Lq|R +ze4Bl4QzCgUx<{Ng4IuBxP^uWFmrCCmG;-fNjp9}@OT22X<8l!3-NqvG7&VgSW0oa| +zv;MgHs(M$fR}{CPsVfp5J|9Gh`nBp)wx5op@xIgPiIkFYz*k?Hgj@g?^y!SVjrY#K +z>Tp)wP0rRn1{SPVrNByD%wmzgBX_1QqH*@t*^T16;z4LtV~4imCL8K(tY0N=7PV8| +zX%(rl8F-UN_9>|jbBMk}sl{$~DFgfLyb-OBV=vH-_L@Qw0iGzRFnE9aU7wWrME&Ss +zrm=2K(Ia|_DK56&aMAn=P94h`9LO2g2_-^3BKqd!dSnU1sR-AX={od(F1eD^B04vP +zITMShYfK&2Zw$LX5ayKj5Tes*7EhQIuJ$5g^wt}5RH{XwXL^)fD;{N(!cr<Z9ll%} +z=29s+1Y{h)VHrmNp5}%1aOiCRkX+|KBy+e{|97S3iDZf(6ZNHjG=O5rMuX{B^bifB +z;WUa8Xe=esqx2X}gwJ$7S~M2)Q?8FdcA8Q-!mezh4Y(eswxM<<Qd5TOZcPEM9!<T? +zuH4ZU;ku8zjx6aoR|(Hge|7_|u?yRfKLzMn7S&&00FU35&$QE-&!pM@Jd-AGQ6<Ot +zb_>qL51|)TniM8YAf9d#TzGnW%z7r{4EEGAG8`P*k#{IqpC8h*;z#CW3Z_uHkHRP% +zSCJxdH6a^)B}L|AC&>Ip-~bRaQRb6@?Gw3pnV%{w?WXX(O2G^o;h<qsDVQk=6as!L +z^Uc7N$7KH1Nisifvdpgs9JpWdxE@r3yQygP=at$C$<Xga%x;E`2h#n}@&oiB^gNV) +z4Nd=sM&Ruz8bc35-xDbj7>`*BAD8*ODKa1V1ZDx6fOnph`RM<W`RP+-{thraRpyTZ +z(P=V2c$&;FoG$Z?fHqy`M*=&5Mqv0%nRm_N!P(-_9{Ju><?9Ri!oXiRAOew?dE#uD +zuK+UV$h;ef&6N3+r=WR0zWeJe?7j|Tj(C-;6LLi_2b=Ljp0e|>0zZ6S5Jm=K<O;rJ +zv2&Cm&}woz^cO09?u%^4CNI@ln_c{JWH7E#pYpOI=eI48l{<UPl7>!-+r(UPvvB&K +zdh&AH&hw<HYxKV7{X!Cm(X##UH>~hdK}*fzd!lyqf0G8g+{d&vVw=uW>#%uRngp|C +zM2whz>9n|A{91Hh9UyA3?-dz)Mw&B1s49H`jZgDQ<up&+7Gb?n%4;|sSMlfRVHJI* +zhdrDqPz66dOozDlA@OmW;=fPWlJHFea^XPh$dAclN+MkcsB$)G+j8r;>0!Z1A(J@x +z@^NmW8g~Y&UX+EswbPg@uCsL-^TcIludo5DApsdc->yn=gP1J3O*%@EBBcVXhIkEI +z2bOs(KJ3!4bwF8_TrfQTV6Z<<BlnrNpSNCd@m9pCknl}v<f=~f7<LL;{Tbyd7YiLC +zy4jPFkA%cmKE)zka;kTRd!#}k;opn4^JeE3=q*v-8OEY;N=A6#Dhhr^&})=~92Z|U +zp>m-RUSWul-gUT5JY|WUV{=5`h~V%7(VeHGDnxnBZ122s%6+=8<jxLN$3EuEooALF +zH?R}#UCCb7-IbF`dBw1~tK!+Acj=bEe~N{QtRd24zT{bToL<#+rO`4nf(|G4!Fo15 +zS1<U_C_DQ2Gbd(27da!AN3fO7@<8ic7mth-=ZZ0{%h7%`3SaX13!Rc7uoCCT9yxNv +zPL6%MT&EG85k-jneI;v#Sz_nM7{)<r59c`RaJ_b^7n~VJiSh3<+~ht2UyMJj$c0O( +z5PPZh>HWUC?9JJsCPm2-KZQ)|jn9gm!gFGs@Vr<8tF$W)L2LRu-hR!^!hX2r31<e@ +z#9XH%IJ{E)-jJ1D!ewV46#P3-fqhNdNu2g`cnx+4YsT}Jax$>vWxRMv*P)vMYu?Ar +z;5lJhRl1H=rQ7MPX<>6>Fyi~U9;#Y2fP`6V<{VFZH|_0dp~%3p(#~?vrn$LbaN*+| +z@ak{J^`Uysnz-Lrov<}Q7l-^dfKxR;3HcF=o&Roam(G>>>UoF+^Fy$<hXnS-kpDl* +zj+>9DnkDmlfule|w#?548nZ(|!N>b4WZ^_uB4mqht{xF2DHkzkfq?f__q_LV+1(Ll +z(gK;+=gIt{yfBQ}#oPIoaCYLa^i^DZjeo=O8vhos4%h&^3v2`4cj!GUiEqRn`J7oQ +zaNIY#Uz|V6RAGf>=9l5RCLjJ34tk6E#w`?Bvzda9=sjDhA851a<-TZ+qXf%D3%oL3 +z-!JaI(a}kLCt-ie?-$3SmjB*Qbrsvu7P0u%cT#i`n~lvA^FkZ0=`XO^GGD-K$W3~= +z@8PijV#eXvD^3TS!%xqLm=L{~(d(g=znIZFx|q?T7yX=P5z|BkxOH*vi-RSO_?d5# +zcB(e6CT&w%@Hh>vq_y!`vv&^7ne8^`&MqF&gh-nO&E|*>VS%_48A>3$A-dqYjkUK6 +z%G9=b#dR~gcdaZl`@bmR7Kluu`GrN0bYbCj;a{IWQ^>emQ^>e0E$pcRu^i@J4!>;= +zKwM>Xs@0LNzwufIr{+<s_!h-7@(?s#u{wB%tbDUNCxcZXWV8Wj524j#6|xZr&=2hH +zm!KbvXRT;M(VjvZhPDZ9c=wp&=p#)prh`;MRmKZnGkpcXx*hWypDxewTsvdYMnT%i +ztIZu*;lA@0?b!?+ot?*#PqJtiO#QLtQier)%HU2tJCCQ_@Jo1_-B@Kfn-N5L9-sQP +z`y@`^tJ$~ajvrg**PN9?C@L<e(R;$8MP1BK86(eT2%y}jn{v}hM)^mTvZ04^4Wk@E +zd5u1N8x`lSl@)O{o2BXG?a%jc{XV<3e-C%xKJ%3%8ejD;<yL*Q&4{X*c4|fH!Y>c& +zP(AzWY2EnZ4fIU$)q=^$uvzx6mjd7m%w{aAWhLyN;U1ckP&?LZ%uQ%|B1>%Hyh0AH +z4xw!Vsxz)iT=QKUaDB3<4H;nYuClTBjw%}=E9D<-z%|CzHWd1HmEpRvs9@;5qY7-Y +zlKVj$^1sFp%5ZhM3UEy-syE&{itT^a56W=e`#}M&ajtp}`#@0<DlGmTa3DFQulk@u +zf@uC(pJ(F=b@0`XtdgP2$xhS*0=v3*$_}=3;N*fF{gjdA=xR-{e3^LhJdyt-Q%+^( +zerm1f;5We+JQqt)`LQcIXzVBrjXA?=J|>fv{zO@bpr?P(Q3>iy8-(#*MhSFKz4ErK +zZ1e9>$ru@h(_u7fi%JJu+iG<P=X_L$x@$}2)Ye^Fn*2?$$J62!`eD8}dIa<N&q6Ce +zWeMgh`9*c<+cts*l<>^xL5Mf8dJVF*9Q3{y-xMbslF~)&Pd-5_PLxn{`8R*8nr*#d +z73?~T=@c!C(29<T<+@z{L7^~0Bfb&As*x?^Y;Os2oo@*;hd(WDu_aR=g&;dLAS;w8 +z8u_bTS%h<&UD0aU+E1yu4jZklsl=6PHy~>ntz~QfPAyyex9gmVEkRxWEIrSkrL*|i +zq;cVSclQ2A|MMg~cWazdOOVG<f-~R8ddLcnSQgb1#CC~JHBPZPhEN+uY$P_vslUm} +zzB*?HxR%Zac~k4)6^DXc5k;uF`A_@cui9^~t3&;kx(p5Zt1y4K6&$xltTj8OtW1_Y +zxx4(mX2pxj)*o&i`!!LUP{F6%>Ur+&>UmzVGUb+^UP4sQ39t|`&OcYn^H%Boa+Zfp +zHf+X;b08`OsC{m{zo8B_yxw;^pVF}!P5Ch6RO4hr$qYZmHK5qT;TlvJe#xH?`Odam +zZha`-yl&n2hg)@jA*y&gw_Kg!J;EBP#jbi2zaMB4C|NsMRxS_IVwZ0TvPxOy4)HtG +zBwB*XP-&;~*<)vp2v0t&9O|-~ZU?fg)?zA0z1?CW3um-RpDeSEJQT$8Ti$qB*?x19 +zTDkUH#$)huxyY;*U=P^<FL<e%+5ccQv&}fzCbG8IHYGSIu!`Yh<;QsF;1_lp`~$Op +zp4fz(?+Mh{*7s$4wY8_Bzg_M7&#<h1@l2glG6o}Z2&}fiVilYHcpaO4=P@?>lH)z` +z0#)DOU%{Ich0-23WMijG+89TjhV^KNq4j_3InKT<uV>#jpgPaI2iYCIr8M_k<j#7# +z;xlf-j=A5+d~unuQ+NUS9rOKw1~z+S1EXMVU=(5-7zLNq2RtrQ$6p1HFZi{@$27?N +zBw!Ix*uYjEi)w5pEoS*y@N!!H>&nG$sbrPzQI+lml`b30Mxx@#hn>*sm#V$E6FBpo +z=;8W5OYA$r_}$vb_$_T@{4)J(((*(`*W0-CU+yQJWPHNEuTZ5KJLLA0=8-|L#6Gmx +zQE@Ulf?i*>cMUz967Z}Py+LZvbJB0UUJ6Zk$AN;k`%MdeH(L_qKXa5o!>pb<^GCK; +z3dGu>sH_wg7rWYD3`yY^hh(WWl^ma2Sm3J@@_b%_MWTJDm^HMgnKfLenRGW#vkKBK +zawWbP(ly45>WXEg9hJ&-tn?Q{Jcd=>^%XYvBmZY^`;YLmOP<vA_^seB57mr^jL;N5 +zJ@nu6;PNsaZg?3F`_3{RQd$`gcfdnNXb%q*a9F9k?UXV?dwIx0^!<H^Is7?s%ZOy0 +z%KIR~8&Pk#kNTr(U`5R!78L_onR<GI&8}n;+e@2Hv%OT`%=XgE=6b~B+-4S;^P8DI +z=nUiKcV`$cyU#FQ<TK3L{XEXZ-$Ng2{p4ML1SZX4CFypLja=X)%g1~?$G2aogO>do +zzN1pKdKks|9!7DWhf$p0;_9XNMK?w5VdcuL9*WNPS)u<~wzX$_WotdlWJ_*kvh8kV +zvemRQ*?wwevW2!W+0L~wP9~jWoXkDPIO#a&Oq>NhtFoQ$<|Od2l6#jE7dT<E)j_rv +z0kNxFwz_kS;_Y*cV&DZvapna^arFgPFU2d}6vGcI;$4a?rmhg*6)YwT<)W{RXX~N$ +zimSaIo^tZ8r+j5BfhNBa{JNw|Y`#I4*nE30vH8TyY`(RZU5WKQ5-8pCSq>{ZZ@Q$D +z@Rug_w?m?4{9-#KoRBLLZ3p@ph-L%HsMJpfcA<X-*oEae6}Sex96@xXn&>w0yT1|b +z27-?gRRc$mB~|=D6jei%4NO8V@=z_t00DJGF99{c@MA=Gfb8S=?Hrg~kLN%<em{5> +z@B#@Zh)RJejo6m}(@COdfL35+6Hy5e@FVyIoPY~x1Y+<j`c#1Zn*I&IeofB?RscJJ +zgTPV13;YC#%|wHNaex!J1C*R0ItN61Knqv_90EGoeGAc6pau}V;NdKIMjM6J1;n-z +z1%3lwfG58tS_rHF8i2ebL~-8{%?H*1M}TJFHZZt~C?8l0>;zhY!tXI2dQJmgX@l;4 +z;0suI31hII)c`lzF?R=1Xtb7|1o~eknh3m%{w`o#C-eqv2i&+n@(<`7xPyM!eOg*| +zji^7``M~SfLFWee16Bb$ffC>p@G9Ql0Fr(tIsnYQ1Dz<)8EMGFY3K^_$rw}|vVm2= +zPe5j%hPDG2f-ojTL(WhQT>~6~hIRm9VH%nblmbzGG?WJ{0$v6V0LOub{_xL%m@9_p +z^8L^g5N9Lx?>O2i55SiAZK8BIQPl{dy(5Vp8U>67k3jes$OEhaZUfIG5N!gE0$~qh +z955eP2;5+F&>nmQzB`uaIA9+~G$;|a#xDYKNze;m8joL5fmUGfqqtAO8km6f0PF^C +z15+mwtp=KbwZBDw5-^$QW3>Cw-uo9dg~)?voscp2N%+qq@RpDERqz2E1e$=K0LPz* +z>VTvrkd?upr8_{rs3oTpYq$Wm0;+(yD~M*Ugx-Lig`o8Y(ezdDI{-&}It6qBQ&wZG +z0dwDie*yVxutwj;J#Y<}xEAvR{nnumtO51{H-XmmL_7WmHUO;efG$u7Q~{wIz$dT* +z_;@4q`)8uhz-P%8=mikBV*N&FsdyWaWjpu=N`dJ2h+YR8fZ!eQF^s838~#2~I<Ow_ +z0&8|cwhuttg|R?v5z&xcSnt4+5AmM?Kr3L`4cb8D9@q$oFNQvVpFV>9K7n3<eL&h? +z*a#^63z2poWCV)$6Lpl}{ileFr9_K?=rY(Bcm>!DR0B7FNe95wU!g<bozGy?NG-km +z1$aG#IB^)yfK4)JeTj7ibOQ6s5i5Y1Um;!rVP8X^h@*vQYbtPG3A#Wba0F<LK>Uk@ +zet=y-Gtdc4G$Kv{>_3L4m_Qd;15^PWKz|AL1U3OO&<Z3(!S8`;AfYd4BIf6zT?14> +Zzol-hJ3M=-8oCR|x&%(egRelM{{{cB@hkuU + +literal 0 +HcmV?d00001 + +-- +1.9.1 + diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0028-usb-host-xhci-rcar-update-firmware-for-R-Car-H3-and-.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0028-usb-host-xhci-rcar-update-firmware-for-R-Car-H3-and-.patch new file mode 100644 index 0000000..2068abc --- /dev/null +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0028-usb-host-xhci-rcar-update-firmware-for-R-Car-H3-and-.patch @@ -0,0 +1,206 @@ +From 7c3dfc0bb21bf717dc19a6b677a866aef8b70c35 Mon Sep 17 00:00:00 2001 +From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> +Date: Wed, 10 Aug 2016 19:56:39 +0900 +Subject: [PATCH] usb: host: xhci-rcar: update firmware for R-Car H3 and M3-W + +This patch updates the firmware files for R-Car H3 and M3-W to fix +the device detection issue. + +The md5sum of the files are: +645db7e9056029efa15f158e51cc8a11 r8a779x_usb3_v2.dlmem +687d5d42f38f9850f8d5a6071dca3109 r8a779x_usb3_v3.dlmem + +Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> +Signed-off-by: Kyle McMartin <kyle@kernel.org> +--- + firmware/r8a779x_usb3_v2.dlmem | Bin 9472 -> 9416 bytes + firmware/r8a779x_usb3_v3.dlmem | Bin 9472 -> 9416 bytes + 2 files changed, 0 insertions(+), 0 deletions(-) + +diff --git a/firmware/r8a779x_usb3_v2.dlmem b/firmware/r8a779x_usb3_v2.dlmem +index 7db71726f45943e7162d8e21ce7d80885bd79184..2b85222467e555a0f33002d1dad5ecf39da9d9b8 100644 +GIT binary patch +delta 2698 +zcmY*b4Nz3q6~6b$zQ-=?!aiA+U3U4~T_YkEsUnEF2x#y(qNq_(0hRFwm1eAyrdn14 +zmQw3zZZKr3Mu#6Q<Cu!B%}{ciSg_WTksz!}6&Dp`)Cn~Lb&{CZa~2zuo%zl^_ug~9 +zbKZI9-nXv#SLOvbEN>YKAsqyN1LU^taBu?Mb$E82Fymk61`;UU#Z1Cv<He9+txE}| +ztstihZk0>P8{<+q%NPDZ&zz4PGn>+@=ePOQP}LGYm(qNGtoV#hvmgKEw@dY<p@hyc +zT>qF5u83hRuQhrcgNxpEin6~z_QKkUur#rRluG%;F=%o*#ffaHzcZFNyxEtmT*-0R +zrcv0j!p?7e9(JS3leU74nXkWO;7SBL=5H<evu`K;Cp?#7ZA=12STfF=-L2w^XB=08 +zUwg&Z|AUuHipK0>z1fXm*ES(dbP|^@qsjZ7qE3yOdb68gFE<ghbxFO&q=U+t#^wHw +zP{LBwa~!+CY7gl$q&}p?DVF+X4Wgo4($bDPZR$fctX8ucbt>&-ch%cy8e5==i+eA< +z3raeL)PdYhh9N>vdaFuE<VuIG%vncXq;#k(DL6mNPHG%+x{Nw4SDG`>Qp{{sje(sC +zU9HcuR2w6bpEooJDSoiJjy=_6Xdh+N%>;|g;i+7yWU~XN&Re{t3hElOwa?&E{6sg% +z2(cV0dAz6#m>(4(|B>y;zivmX3YnU;WzJKOiH|=M`Tb$_5c^wzQT4VqO;p%yeRO1T +zCYNI7aOoi6EWkXMOVa^I=Bg68l*PgWZMN@V?s=U{ne({xRu-3%=5whM@D9v(EfB#@ +zVEKU=D_sk?v~D4n0vCZDpaXDVF_+{wxU_Hymqq{+v$=E`ATQ-o)G{s=<Z!7S@Xc~A +zO<KXFYCt<+;+tGLx=I4>&FtGiTllQiTxtg7tl?4<ASRbfGuFZrNfTI#Hay6_)+GfK +z@LR8jHNrM%<D`p4eVe#4!m6}!w3&Ub{T21HR9z%(V{3G?4Poo??bTDP+4H<sl?JNQ +z$j<4O(QlY4=wyIyTbI@`=zvZ-&CUh=jBaGTLHYD8mJ$3<n#8nvThN(xTxwYlx#R^v +zOgnSxZIMZNP``XG)dMaA5(~Jr6wqD}2sZcFKD{9zc_Tc>CN0b_v6Fg3P}(LgeGe!s +z)WO<u)~cTzE^f0L%S*$PEeW^eWAaA%DrA{c<OaE)>E*bL38Ez-JlULP%7QmtWJ$0Z +zDH)xQ+E-$4?6~t^k(jc~X~=^N=AC^Y7w<%#99ANmri2z_oS9#hl_KA$?<43Xxfp%_ +z@3*lS{Vo@y-}7SDCNF+NE+2OICvat`-0d4Z`-iPKKl)p@wHs2-mm5`^d}+T~Q3uHs +zR19l>x}H~or28w7^bFfF)>hKu(|7-F?@ATH16wKeDp5(zaLAhvXijj2AK0)`fZ0VD +z{b0NRqew<A&Vug$Qf~lV1N*mO41}>0MjebDFb2Q0X#-s*q=7V%Msn3K@b^b{77${f +z=`1?LNkdtFh>7~KUxTh;e+}7LBGk6d;mXF^Dv)#Q`rvp9_3oMZa<A&1b_2*#ts4&O +zCpA?d&9!~;5Uth?@?c$g{Ew~59dI4h^ub|nuW^IiQ(F!)xvtCbV=Fw=mKrz6`kHc( +z<Hg!8D3gwTY>1>o>>9`iY|s!*8<{@TNF!KmXe^!2mW9T{1MGv9gY3i5Q!_77Ed7l3 +zVW6mJZw2|hy$ZViImObCe2JwW>L_#es$ZnMhxbq+-V;$tQCKXt*J#u>(K2JN+N*Db +zk4F(ZX^ak7LC~x73$C1IUl=3p6>WCos@#3@)0d}Z$S4q+xEF4JJUc>|Kr{(#N!Vh# +zf_)UWOt2@ip|B`;27}2#JuKB^)t_m@Y`$(o-rc~vkZm!=#phka$c1t@@GdHKimOd{ +zpF0M#K`->_qjx%f15U8dO$IseI`VX1N1h9v_%&eN<_Ws6E?j=zh08h*i!x6dJHt~2 +zwOHuEja(0I6tH}=RlC~5B^RI`@EQBPIXZsCXCvM~o2VPeS!UE~1kt6ycSV|eLl8@R +z+U6Tv+QDv_<4R&~B5UVO^muY})T38Tmln$CVZK!Y46o)cnBzCg{uODp!twFkvL>nF +zi3VVV_MFZY(rryL`Lv0kMG^{YPhfYPPYdfFt-=os0g4P}DxffTvxDJgdWiigJU(vV +zHopDocksDy-@yzMd+-lIJ*jp6BH%^JJ@{TlCAr9_%0WggHq|Hp#;V3zCXc;+4?QQ{ +zN6&%#=(&e&w-^P@3%1{qlu>b~%HdLS33jyHgB?Aq2Rr)xo-Sy;qdnMwwLRE?$#;>c +z;Vu$+?;_F2T`W=#Q!GaMHZxkIO-Wv~$@QX5wHIv$yl7L+vaLp8+;?oNb<&zE_g{sy +zJiw6eJiw6N2N=@74?`yOVaUurq>JcBI#)l^9qC89@ej+Ks{&v4{GHLBC;p!*N7*w- +zLh}&4raVNiv;p)wG=N?$EIz^rr)*9{q+l6jg%J^^<i}{b?lGG7KStB}Ptf!VI|ioR +z%pI{_-);~{%QZs6+6gHDEIIFpTtl<BLJwC1Mh0Q)KZJCG9%>dy#8X1%0%n1}12F4r +zLN)`A11e#D<r)0t16&5(1E?G#q#wrd?8~S~ReCsFkZd^W1Nw;lA^LUe_waA&LMkCm +zGYH9=2~hy9S%i#p5@Kdgqd!nz)C)wE1+t4Bjya|O47A2S64C>Zk3zz1p3O!Nu<f?L +U&;jPKPot;VTKh+StJ4YjA4B_1P5=M^ + +delta 2932 +zcmY*b4Ny~87QXMndyfQOfCnK22n3Q~714moimn6^6}6)H|3fP%vR3hLckAvtx}*ro +zb{q%2i{0*4RwbZS$FT@@wQ{GE1y?)NA|;4aAVfg?sedhYw*qg^4OrUDeCM8b&-u<h +z_vhT3>+`Jh{mv|(<O)Phi2nLepz*MunK^fOW(B*c|C2s5!<@rfHcoRsuwS&wK}<c! +zX>1K=m9spo@+F+j{)g$lIM!n(!`Lrw@hoS!G*7EseKCOlj+wZ`zaR)Pv(-da1=o$K +zYB4=sxX;2Xy;!st5&3j*GM|qMgluGbs<m2pBc9=9QG1!38Fn3!GfjqHF<{YwWfwl| +z6_6htV$^Vh1yYv?ZA+1Kc(7C)^*Qa1n(~W?1o}M8bgWg;&WtvW$Q{u{4jwbg>iCIe +z6(Ye;HP)F?1%A!rl6ecVx^s)$Z{c|btAwPT8CSrVgJTt|O?e6y?LiLp^!p65@Vnh# +zXLwn*i%e66IQ_l?dQ0$G#dM|t-&bs5rsAc_n3%t(IA8@QqY99_P(MWLO{wSDcp|r{ +z3N00AFtLdXOQheI@W)D1Owg<fk;rwksHZBmp7Q`piOS~oED)o3H0jJ4HqjG$bMgO_ +zv&0v(DrSI3YX1}>AHnmyr%YP$PAM$sxXnFktL(|wfDGr0U`s0V91!_M9*tkNmB!EA +zR?pE$cKnIATKhNAW;ulh5|7YPmeW!634X9dR@~`riuhwH5ys6X!co8_K-3%}qyWn1 +zaPdS~j14{pgXdf#bO7F*M}*yJL`a%Xgd>0g_};UC2R|i#$7j~c;sr#=eUk`*3&9W2 +z2KZ|_5keLbVcB9L3;`x*5aA{uWC;=8SW1M=%ZShlU{??!0dO493Yff#2)5M%#NL5D +zL__GDHAJWbWUeKG9WXAF2&r#*fju726hnQ-zhxC*R>I_U3h48~Tf`WF<n?SM@(?~I +z#xT|RhWMw*J}+a!IiwFtMjp=?wFhU?9NTA1TBcGad#7=*md$vBYNlGhj_ztDL)Q{z +z*K<l(%PaV@YAN#qi@qnkgSI$C(^C^1r{nmt??fgKKk&_FcH;$pH<%=>_BZ%ezfFXO +zb&zG2H)Jy&&-FKKNXmkh%_hQmz)irk^+Z?$XkG6EJ`aU_WYe5N+0repN?b45IR{6C +z<Q$msMiJ~^{LJp+)=Mr9vJ=ua5`oVp!nRx$_*CLA{o_JaTXdSDg3zg9<~!0cDM$JO +zW|5g!1M(2oN-<(QA7&1n8j`F{qbDRo(j-=HYyW{q+O&{l%A)>J+j~H+*iKoQ+mm^D +zhgInE+mHCZ`iFH7c;^8mv=TWSpO7?RAv-AhH8XDqW!~IDnP?|&meLo66!n|D%tRh2 +zs&Tg+`}=kD+jgKv*9IwOOI6%PcbZwn6|f1Li~Gf2_HQbtK@Szvpw)P1fMIKcTmSQ4 +z_O9d*y?x#nx@3LARXEml2bIT(eC^<dl`MP_Xg#653N4R@JuZRnHKJF6t^|8Gv_8<@ +zg;oV^8?=5SKFyd39K+1VV*@Rr;Rhey*R#53-*ja)-qU!aVDpAn*KIvZWFNdQ(85Ug +z-+|lLDQ)$$iJWIE1({ya1BI-tteKH5b#X3n1IPlg2Fm*L@=}mdww_oR&sGESXhl)% +z&%KIFa7mT-K-ssJ*MKav6@g5~ht&ZA#_}2{`19pOAk8)htV|I8R2{(#;M*YY;vdwJ +z+AG(Tea;6}YMt3CA4fCb9!~6}ms}8z3mVI$;I%=q+WFU%PG^@(3<DoC`Zf3rUxfSd +ziJ(&^mZdwA+Sm`Hlr+|ZM7K(zIHt06M}}_E9T~t|H5yYJW3zNAMy{DZ3|}+Ju#$GB +zP}8Mw`d7hIa}Iy3iS#~-DC_Q*M81F>nuwf|2BT(m=6llf*x{mjtYHxozZV%b@4ix+ +z4@tLlg_`V4mhY79gTq>f?Ba}N@4otaB0@c4osjzKb-#V^b${J~)K|mtrUkPI2M4D! +zhwyKLm$HxJ@YP^Fa}~D-n<ke1m<FeZz8N-mmM$(wdI6`gKrDs1{=R|E@=62EHwp3$ +z#Bth~MQ?mXXOt_o!6mS;z``HV(s$7GGz0W9w@y#w@H@1rsZgU<!k&sv-0;rRxXn#8 +z?#Zud+&%cLcB0DJOnW|e(4H0t?$b^P@NA*3fi2WvY@vp6cx;GHjB0_p2W$fr<E0^y +zvBd3j)9usOLLa<Bji_XKs|>H4pt{ZS`EJd88}3+qA|xjN;cXiAqgEQVx^<Y*rC^ri +zN|fPh&4&o1-)VQ~bh450398pY;g;ReB`9EPFF-3HG>ypDLDRam??H<|4D?ll7VXxY +zcZL__rwGw<8yGnV;Tkb@Ay3U7g*`}s3$O}SiayV)@XpZKm<xC5sbkyeV%XYg+CR3_ +zzb%!>X4&aInCOCMR-a%+wekvlBh<iIzajD_{5&*nyv;?KFI|**;T~nCc2njMFjxA# +zW+Km8xoH5Whb63C++J$3%9)53Tw6OWIKG1xTxN#@iXf+hmO@@fKZHY_H1uyfY3S3P +zG&Jd?YZ>M&wEPZ|a=*174i^DpYN2F1!y@B{+$^J$va+0%b-_tlSzWeK)@LIuwpM=f +z3didvtSz}WnpXEcnpR3TP3v?wO{=k+ruE-$nwC!wO{=$u4v^MM2Y9=e4)CnE(6Sn4 +z>`tqFWB{*P_yhErE;6pEm$C+WDa)&mvR3s`*1<m8DC@}x%db|Juoxb}c0a)r!o%ax +zBT9~bM9JqLQL^-yl1m=jERNSh$|Gcbt$Y&i4PWPfUCpApuMi4uL})!A?c%rLYnhCb +zP(6)+mrud;3?ZKo7NrBipCdE}unY7`K++3@HUY{2cKE*j9sK1541ul+WzqZJBNPs8 +z7XDBl!R-d^C9c(fz_{@8$hpi*d@M2)ZtBaCA1KcIvuFsAhgV0P^8c5_qN;x&)B%t_ +gLTC;4HyD^gJjL)S<HX;>-_7ILWc;UR@mYla4-;9yJOBUy + +diff --git a/firmware/r8a779x_usb3_v3.dlmem b/firmware/r8a779x_usb3_v3.dlmem +index eac36a96bee1a8614eef9caa88e5a9de136af30c..1e09014d1876e1acd638db7b067f96397216af1b 100644 +GIT binary patch +delta 2698 +zcmY*b4Nz3q6~6buzQ-=?!aiA+U3U4~T_PeDsUnEFC}{kTC~8zxKxO<vr5Woasg{)h +zrPMl_8;qH%(cwqSIHsa&GnCvW7OZv1NDx+~ii-*|>Vz7BI!VmyIg5?S&V1*dd+#~l +zIq$r4?_1aWEAv7cmbVOrk`98u0dm`RC?tvQIyAFR=#M)$kVNS&W)dbEFNO|lT}l{j +z1vyo4t6WN+pG)B^U-&0Ib3Wd0CZ$);Z}YFAswMs|rTP3A@fn?BKmP0Qmg-Bxh~I3( +z^-l=liWuJVTBFA?xad8nC<h2+FRYyi&k##UsgzF~gC>_#9M2{PIOB=Kn|;a3l^lm{ +z3WXgj?EKc}VK=Hg87qk2eElT@S0dT50Bgx#d^@v##&a3g{E{%jk~nX6w~8yCIIe`e +z_KL6nM=zHYgW1J<vm3##ZCr-vBrab@6DypePK}v*vzuTqHyN{aNxj9SgUVUP<pGW` +z!qU{U9lOA459u<bKcvJdmilH5qM}^V(vCW9`a?CW9$_`=blS=8s<+V$wm_4R@cyhW +zDCs0p2XZ$Vh6p{gT2(?aS2}cM&N}iUtwUu=!}(cuQsYR_W!7oA(wvEwVpgll4|Xbb +zwLZ&IZLCOs+0Y=Q`NQfu_EeLpeUw=@9W1hjCv&BW%?zA8Z}FCDsB7%jK7&i~7u_Hu +z#d4_R@uDtZepH0~hqojDx*e@5WNOluIZr_*KK?A^4}jH!?C*g_)!W((QDHOnF;T@? +zT#B8|r2~Mo0P`F!O$8jDqe|w|Tow^zvwaV9&+A;un#ZNL=5i@zK9{Nh@4|f70uk&4 +zmLHV4(zSp~>lSh;Xc5=}Isp3@b4h-KOAD89X#_Ann@g7g@=`8EFXK`{4wu>i-!A9U +zgcV#m0%!+}f0Ii`S4qIVnSB>zi<q&ROU;0sHC$=}#O88o+FE!bX&g(_Mg-f}x}*>S +ze(Tk+M%V^zf^@N{ZxdHWShY5RHnT6Z?@%vG*G17bwnjJ85WXJYUOmN{J<n@ZX`nid +z?3`{H{g$bMPX_9?b!i=g4(O!Q>|F3K=tkBXoKN3knIZq8DNL)k1)o{RrIz)OOI{$v +zv@@sP7L}3*^~>i{J>W7RxqwSc0qq4rU~`Y{(;EU)H^Osl(!%@_JE=DWXKdoq4}ii# +z9jqN^t@?=(;x?<Xyfh-!l5|TxCU2ClLY6s2ZjcpBFDGP<6D>&*spbsRTzJz(mL#i@ +zlF|97eHHe`jywMqiD|Am19_0ayt5DF;+@Eo!%Ae+q_AR)GyUtbQsf);eFVKE7o+e0 +z{Wcb(-{oTTdtS`i<i&5u<-?AEB(4mVyM3dlV%UoFqrY=oyCLO#xly&rm-d^Lb&yO! +z<*@eW>v@$(T2YClXV{i8wvrZ~zWeukSE>je*ea=4iB4&TL*Be!bAl^;|Av(U%r3&{ +z590+GMKWq}7W9CZdIRVh*uM>95R9EL>R{}EG32F98|X424Wx-QlB<S+e>}3Yz)%C7 +z#bQF8G>qkkny5ef4d@#7x6qv>LT&48u57HW205p$500l$@1CA7_p0t`H-IeFy5X>X +zT2l?uT-%oj(Q4fw57d<>{?w}60oPGY9~|cP8aK#2wdEjF>$(g-wZcPfsd0m>uPFyP +zR;=xUGU?bShA2A3u7P~O1`RQ^k?F&XG?K-K#nbt0Sy&=Gz&=<xz&;8)HT@FB(obt2 +z28zn|R*=uztD)<kQ!M?+S6KR?jxuMj`bFCNcn=lgJrSJ}jm2VnjYe$~Ei?A2z4}J@ +zcoead#+bkr1id=H<jQIGr7_B0*=9Gc%H1bFeR*1ji~^y_d*SxSvm=BHM3cmpgfFHm +z*vH|^1bZ?Y3Xg_oFqj<F!_rMw{h2n*=9@O;-3`18*%nhmV%{~3Tqt(~@1jztxY~sG +zxnnRJ^g^FLdZ*(z-~{`^WRQcdBTx5r<hjs^Ujx={9;XZM!sX{(xUBQAX!C?I(>&Es +zi-jKC$o1ex0n0aAwW~c`aslcApR+%hV-iPvHsTGmiN1lHWk#(=5M2s<SEM;N1hK@Y +zZN9;!9qg7lp(OSuvUc7?k0&=rJ$lu2X`zfB=36De@M`XYIexS3Uz1iV93RguYl<44 +zXaGiND?-PRP7Pa6+f6rr&81a{+mT6p(p6@Fw0RAewy0fo7n9f&Z~gY3@{i3tO@ +z@$FB&gU@~Y4rZ9#gMSF>Nv-o&fiKeT!S^aU#YH|-4lru5sXqNTRyE!-am?*|=sDp& +zdJf!2&pm9r#VBZAunJ2`X62n~hfB#N*wJzicJz!M?C1}Ax}f!r_Fx0n_Fx01-bJE@ +zyGZ1{i$o)Lu}C>gu^8#w%xH}<rFhXM*NZksyl6AvMVlim+iDczzGqvl6V_b0|0<;A +z0fv0{0fzKGz>oob7&563LuU0MU1UGfx%!dra6i(GeOTsP74)*_?~L|53HVGo%AP?I +znuq8$=^=V$44~J+0rYBNiIGM)WwRrr1j`^RjEpp;K1S1ZkI}UMF`CYQf~Hs4F);0B +z?#T7}c7s4#t`QR6PDlY@$$3ZA8k)TodiV%nWDvIgLr5p+VP=6uJ|$!hU<T+r05iTJ +zWHaD6pbF+!p21%}z-7=qfT|%v`e7W)zKV`g&5D2vk_|_HNFT93#=LI*0sbvrNGGIe +z8X<G1Lll5(1|e}yLd@)G%!lfWdVz?tKz6Z1v8VK(gVy*bLV5u5QAn80v)Sl=w%ztu +UI=~$EDfBd3Yya5)+B<~&507_F0RR91 + +delta 2932 +zcmY*b4Ny~87QXMndoKyR2oFLMAP`7`RYU_SD|RJ_sHhdi{~uaGk+q6{yIXhH(IrJt +zw&OVHUF>$ZvMK?sbsUReS1WfqEV$aC7AYW7fg}RrPyK7LyA^nQZotxJ<~#Sid(L<6 +zxj*OLT$^W~?{{YTWOpEHLiE>%0?mj0tjyWNGt1dZ-6wrkhB=G%Y^?TNV83XWgP3}d +z)7fgyE@yh#<%>9r{SVW9VVu`YhN-=<#k-8*QoZeR)rA25J7&@n|NJ22HCsbuwXSY# +zWvk`M!hJSgrC`xsMC8-DBt8%23t7nWL~pn8W;{b-(<m&?^jZUvGc2ZGF<>!(WfwlI +z2*`^HHfy=Te90w3+gd0c9xM?@eNKC#CjTNLfj%!Q9cxvTGrgT7a%U8gbz?_aoj<Yc +zLIn7!$2rq0!LNCI5^qCxPj0dMZ9K1JRgknZ{W2J{ag1`cC0EI!J*Y+V`aK5O_}!kb +zGrTO<icC|v`1(C1^cLffm9H}m_?~hLGYv0QMMwWVxdm2m3MvP=3-v>^-sF0YjU#fq +zy1-VB1{0dN&;<H@5r3qzL<h|(7l~Xqi+ZY4>Nzj46ssK`&wMeGN0ZN-VH3QeHwXVu +zHA{Rxt9%A{r1VcE@)11GXX@k?Z<oMwj^Es)vCH0kHOMf&5VoWuw*?|U&!zE8x6=4I +z+v+(QsTP0YqtX9Obl6UzfrKM;l;w03W4s?MksWvWSi=99LWJ?NiEtEf5fC|t2+4rb +zIb0kO7GsmI$>cqk2%Ug8<`H3cDiIRr6X6ITAHMf2;K5IY-}argvS<Mja^4_9;6m^N +zv;+Q{Mugx+L|C?%2t$A==|s2z2wp;j*On4t^D-i|0oWBphzA@8v;n59B7$SJ0I_#q +zFVPe-XAKeR02ynEPzxBJL4=ey6=09UGsTcG6W+87Fe_ooIwkZe@D?#zAh|soi9Cdl +ziP20IzApYLqEBItKZ}e(NyzIdqw(S_+GG37iObZgB%f3c*0LFIP|wsD*U??AVCY(+ +zta?rbYk3)8QZHqmV{yz0pP(%*qUDJNj?-~`Y0M-h7vCR~#q7ol{H`;JSmSRRQ}q@R +z8rDIUnLd!s1U%Q@v>`DQRyK<W=KwbV)7KMW4WMnkFZetV@{mJ&3S~(*xk_=pRLiw+ +zL`cep8E+K9{>9JiZf?Eg<{&#Ebt4h@93pJXQG-tf{?b1-M7_nJEzA#@7HYjM9h0)9 +zFJKlKxz!*KVZ9VB#_^%nkZHk5`c!&C(j{#|#kP(gc%)AaPNFR8AGy5;<cjT-m9agE +zmv`6&m*0NG_tihByU#lhAfb)OVfcik4GrEw*{_(nJ1FzU4$4G3akG@RD7diSqOcNq +zps?E0cJA*t&~L|qYC}7um?c$m8$D@e7L~&$Y%b~-f7!pOhz31WM1xl0odKq;4Icf^ +zf7!c|L-h7}PjJb`_$zR%>kg`p6Zz`F4J%prBG7t6dj(n^4SQS!T`{6pg02F4H?+Rc +z-hoyPZ9BAnBR<WT2^`DJ$KwKRAz=p}+%vL<r{B0T8}Dj;kj}cH&3((r64@8;3$!s3 +z{&(Q^bt*^wY$E46N<gNS_dp@5DynB>NiNPUZUC7tRzq2TURDA!($NzG<2kB99xX47 +z`MFo21um(w9w_^^vTBe8jzW-0_^>7*z+6@h1%Ixr5Tw=70xJ`QKh=aY1NaumJNO4p +zg#PkXRiE>IrN&^j%g50SxQ7$E=p`3~V}r&q$#`v0jDG%AmDA~Ri=p6SMZX50;fruT +zJ`r@v!m@NnQX2bVl;XyEkmzO!6vs4{?#R$hx+4R4t5$1iXB;+{a^#x%!|*ke1S?s~ +z6lh&ar++0pHD~ch+6bSch_dc{N#ygmMH`-7++fzO&UjaP7BgH_kF+de;`So5_MMk1 +z>mli;p+K9J!SY>l?clK1DZ4py={qmKo`g`3SSO^seAQn&_^Q9|K+4PEc++((!a7|V +za|r)Nx0HPpi?8U6%oW_BvrH=eF%?b^eKQ=MEZtnT^c+rOzE}ct{e1(S<>dyNZzALy +zh-3B9i(dPR&L~G}hf82#zKuVkr|+QUNjm7I9-W@Z;df|LQ-M~af;|<RxZ$0rahscH +z+>>9^xO?!&`blbMGwu1jh4!?z;6DAt0Pj}n8rVt==2mJLkH-ZY#K=~td%!k85ndV` +z5kovaH#|Olt@Obw(26RSx6AO#3F=!cpXbr6x8RP&CxWB%9^9f)KWw8>tJ;PcE+w-h +zN1_aOTOLFh{Z742r;~-uk5Rn=3b*vOAzlevdmdT|q3J}v2AbZZeGghVVxX@Iv?!0} +zygj@iKShX=+rh{|2=|D|g}k+Ul(j(uT!59ZQuKLVg?EO;M4!JyPaWGq7sJs()Bdr8 +z{%xs14%<$j!2~xvv&MKks*zXV>mer2{tb~g;b$SS6C7^JeBq|d^LHsTrJFK`fVtB5 +z6%%>a$V~${Ei``Z;*JuFUCuzX;MzNA!SS86;4(T}pa`-%X({A(_Cq+-MMM9#i-tbk +zMMIM=x|X5N0^9E(DbHK`!Eg~ErUpv3D>Nc*$ip%_DJ#=SS?8UUmFaSfvOXJOu{HAJ +zmpINaac%M4(X_hn(zKGhX<DbdX<CilG_C)3)3khhXj;8Jbb!=eI>1}KbbzP51-8{N +zV^3NgBLgUE;1AGehKSgvUdkHir7T4sWv%L?tb=`yQP$%TmS2r5VKFS6?S70WhK0qV +zhm;)kkdn_mq-5z4B^N((*jio<DUXniHS$TkH*B5%H4TgEzCuXXh|qdK>V<E^)-vfQ +zp?VqtFP?zuDMG%%EJ_1}Jws>?U>E2WfW+qrZ32`6YT^6Zckq`NFa)|fghlUtk5Cx2 +znfL=^IJX<L7r4gwKI6vABjz$M@Ue&xxT!Biystdx&!QnfE?ymZ%Ku*yiz@$tP$xk8 +g5TP~L-(+G6@Kn>Mj1zwge>aa~i}|14jS7VR52nDsPyhe` + +-- +1.9.1 + diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0034-arm64-dts-r8a7795-es1-h3ulcb-kf-add-ADAS-board.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0034-arm64-dts-r8a7795-es1-h3ulcb-kf-add-ADAS-board.patch index 74c2b53..f9df329 100644 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0034-arm64-dts-r8a7795-es1-h3ulcb-kf-add-ADAS-board.patch +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0034-arm64-dts-r8a7795-es1-h3ulcb-kf-add-ADAS-board.patch @@ -3,14 +3,14 @@ From: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Date: Wed, 4 Jan 2017 10:37:23 +0300 Subject: [PATCH] arm64: dts: r8a7795-es1-h3ulcb-kf: add ADAS board -H3ULCB.View board on R8A7795 ES1.x SoC +Kingfisher board on R8A7795 ES1.x SoC Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> --- arch/arm64/boot/dts/renesas/Makefile | 1 + - .../boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts | 240 +++ - .../boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts | 1623 ++++++++++++++++++++ - 3 files changed, 1864 insertions(+) + .../boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts | 429 ++++++ + .../boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts | 1627 ++++++++++++++++++++ + 3 files changed, 2057 insertions(+) create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts @@ -28,10 +28,10 @@ index 51a4ac9..24f8036 100644 clean-files := *.dtb diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts new file mode 100644 -index 0000000..0c6cca7 +index 0000000..680a231 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts -@@ -0,0 +1,240 @@ +@@ -0,0 +1,429 @@ +/* + * Device Tree Source for the H3ULCB Kingfisher V1 board on r8a7795 ES1.x + * @@ -51,6 +51,7 @@ index 0000000..0c6cca7 + aliases { + serial1 = &hscif0; + serial2 = &hscif1; ++ serial3 = &scif1; + }; + + wlan_en: regulator@4 { @@ -118,17 +119,33 @@ index 0000000..0c6cca7 + nshutdown_gpio = <343>; /* gpio_ext_74 pin 3 */ + /* serial1 */ + dev_name = "/dev/ttySC1"; -+ flow_cntrl = <0>; ++ flow_cntrl = <1>; + /* int div 8 hscif@26.6666656MHz */ + baud_rate = <3333332>; + }; ++ ++ hdmi-out { ++ compatible = "hdmi-connector"; ++ type = "a"; ++ ++ port { ++ hdmi_con: endpoint { ++ remote-endpoint = <&adv7513_out>; ++ }; ++ }; ++ }; +}; + +&pfc { + /delete-node/hscif4; + ++ scif1_pins: scif1 { ++ groups = "scif1_data_b"; ++ function = "scif1"; ++ }; ++ + hscif0_pins: hscif0 { -+ groups = "hscif0_data"; ++ groups = "hscif0_data", "hscif0_ctrl"; + function = "hscif0"; + }; + @@ -136,14 +153,49 @@ index 0000000..0c6cca7 + groups = "hscif1_data_a", "hscif1_ctrl_a"; + function = "hscif1"; + }; ++ ++ du_pins: du { ++ groups = "du_rgb888", "du_sync", "du_clk_out_0", "du_disp"; ++ function = "du"; ++ }; ++}; ++ ++&du { ++ pinctrl-0 = <&du_pins>; ++ pinctrl-names = "default"; ++ ++ ports { ++ port@0 { ++ endpoint { ++ remote-endpoint = <&adv7513_in>; ++ }; ++ }; ++ port@1 { ++ endpoint { ++ remote-endpoint = <&rcar_dw_hdmi0_in>; ++ }; ++ }; ++ }; +}; + +&gpio0 { ++ /delete-node/video_a_irq; ++ /delete-node/video_b_irq; + /delete-node/gpioext_2_20_irq; +}; + +&gpio1 { + /delete-node/gpioext_2_21_irq; ++ /delete-node/wifi_irq; ++}; ++ ++&gpio2 { ++ bl_pwm { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "BL PWM 100%"; ++ }; +}; + +&gpio5 { @@ -171,6 +223,28 @@ index 0000000..0c6cca7 + /delete-node/gpioext_2_21_irq; +}; + ++&scif1 { ++ pinctrl-0 = <&scif1_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++}; ++ ++&hscif0 { ++ pinctrl-0 = <&hscif0_pins>; ++ pinctrl-names = "default"; ++ ctsrts; ++ ++ status = "okay"; ++}; ++ ++&hscif1 { ++ pinctrl-0 = <&hscif1_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++}; ++ +&hscif4 { + /delete-property/pinctrl-0; + /delete-property/pinctrl-names; @@ -187,6 +261,9 @@ index 0000000..0c6cca7 + reg = <0x74>; + gpio-controller; + #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio6>; ++ interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + hub_pwen { + gpio-hog; @@ -200,6 +277,30 @@ index 0000000..0c6cca7 + output-high; + line-name = "HUB rst"; + }; ++ otg_offvbus { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "OTG off VBUSn"; ++ }; ++ otg_extlpn { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "OTG EXTLPn"; ++ }; ++ otg_stat1 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "OTG Stat1"; ++ }; ++ otg_stat2 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "OTG Stat2"; ++ }; + }; + + gpio_ext_75: pca9539@75 { @@ -207,12 +308,68 @@ index 0000000..0c6cca7 + reg = <0x75>; + gpio-controller; + #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio6>; ++ interrupts = <4 IRQ_TYPE_EDGE_FALLING>; ++ ++ gps_rst { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "GPS rst"; ++ }; ++ fpdl_shdn { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "FPDLink shdn"; ++ }; + }; +}; + +&i2cswitch2 { + reg = <0x71>; + reset-gpios= <&gpio5 3 GPIO_ACTIVE_LOW>; ++ ++ i2c@4 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <4>; ++ ++ hdmi@3d { ++ compatible = "adi,adv7511w"; ++ reg = <0x3d>; ++ interrupt-parent = <&gpio2>; ++ interrupts = <0 IRQ_TYPE_EDGE_BOTH>; ++ pd-gpios = <&gpio_ext_75 5 GPIO_ACTIVE_LOW>; ++ ++ adi,input-depth = <8>; ++ adi,input-colorspace = "rgb"; ++ adi,input-clock = "1x"; ++ adi,input-style = <1>; ++ adi,input-justification = "evenly"; ++ adi,clock-delay = <1200>; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ adv7513_in: endpoint { ++ remote-endpoint = <&du_out_rgb>; ++ }; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ adv7513_out: endpoint { ++ remote-endpoint = <&hdmi_con>; ++ }; ++ }; ++ }; ++ }; ++ }; +}; + +&i2c4 { @@ -223,13 +380,9 @@ index 0000000..0c6cca7 + reg = <0x76>; + gpio-controller; + #gpio-cells = <2>; -+ }; -+ -+ gpio_ext_77: pca9539@77 { -+ compatible = "nxp,pca9539"; -+ reg = <0x77>; -+ gpio-controller; -+ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio7>; ++ interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + + port_b_a0 { + gpio-hog; @@ -255,6 +408,7 @@ index 0000000..0c6cca7 + output-high; + line-name = "Video-A A1"; + }; ++ /* 0 - FPDLink output, 1 - LVDS output */ + lvds_vs_fpdl { + gpio-hog; + gpios = <14 GPIO_ACTIVE_HIGH>; @@ -262,6 +416,41 @@ index 0000000..0c6cca7 + line-name = "LVDS switch"; + }; + }; ++ ++ gpio_ext_77: pca9539@77 { ++ compatible = "nxp,pca9539"; ++ reg = <0x77>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio5>; ++ interrupts = <9 IRQ_TYPE_EDGE_FALLING>; ++ ++ mpcie_wake { ++ gpio-hog; ++ gpios = <0 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "mPCIe WAKE#"; ++ }; ++ mpcie_wdisable { ++ gpio-hog; ++ gpios = <1 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "mPCIe W_DISABLE"; ++ }; ++ mpcie_clreq { ++ gpio-hog; ++ gpios = <2 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "mPCIe CLKREQ#"; ++ }; ++ mpcie_ovc { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "mPCIe OVC"; ++ }; ++ }; +}; + +&i2cswitch4 { @@ -274,10 +463,10 @@ index 0000000..0c6cca7 +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts new file mode 100644 -index 0000000..493604d +index 0000000..e3ccb2d --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts -@@ -0,0 +1,1623 @@ +@@ -0,0 +1,1627 @@ +/* + * Device Tree Source for the H3ULCB Kingfisher board on r8a7795 ES1.x + * @@ -1872,6 +2061,10 @@ index 0000000..493604d + status = "okay"; +}; + ++&msiof1 { ++ status = "disabled"; ++}; ++ +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0037-arm64-dts-r8a7796-m3ulcb-kf-add-ADAS-board.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0037-arm64-dts-r8a7796-m3ulcb-kf-add-ADAS-board.patch index 9407c87..23b242c 100644 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0037-arm64-dts-r8a7796-m3ulcb-kf-add-ADAS-board.patch +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0037-arm64-dts-r8a7796-m3ulcb-kf-add-ADAS-board.patch @@ -3,14 +3,14 @@ From: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Date: Wed, 4 Jan 2017 10:37:23 +0300 Subject: [PATCH] arm64: dts: r8a7796-m3ulcb-kf: add ADAS board -M3ULCB.View board on R8A7796 +Kingfisher board on R8A7796 Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> --- arch/arm64/boot/dts/renesas/Makefile | 1 + - .../boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts | 235 ++++ - arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts | 1151 ++++++++++++++++++++ - 3 files changed, 1387 insertions(+) + .../boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts | 429 ++++++++ + arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts | 1155 ++++++++++++++++++++ + 3 files changed, 1585 insertions(+) create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts @@ -28,10 +28,10 @@ index 5d99267..e41b5b3 100644 clean-files := *.dtb diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts new file mode 100644 -index 0000000..f77ef0f +index 0000000..b205e3f --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts -@@ -0,0 +1,235 @@ +@@ -0,0 +1,429 @@ +/* + * Device Tree Source for the M3ULCB Kingfisher V1 board + * @@ -48,6 +48,12 @@ index 0000000..f77ef0f +/ { + model = "Renesas M3ULCB Kingfisher V1 board based on r8a7796"; + ++ aliases { ++ serial1 = &hscif0; ++ serial2 = &hscif1; ++ serial3 = &scif1; ++ }; ++ + wlan_en: regulator@4 { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; @@ -113,17 +119,33 @@ index 0000000..f77ef0f + nshutdown_gpio = <343>; /* gpio_ext_74 pin 3 */ + /* serial1 */ + dev_name = "/dev/ttySC1"; -+ flow_cntrl = <0>; ++ flow_cntrl = <1>; + /* int div 8 hscif@26.6666656MHz */ + baud_rate = <3333332>; + }; ++ ++ hdmi-out { ++ compatible = "hdmi-connector"; ++ type = "a"; ++ ++ port { ++ hdmi_con: endpoint { ++ remote-endpoint = <&adv7513_out>; ++ }; ++ }; ++ }; +}; + +&pfc { + /delete-node/hscif4; + ++ scif1_pins: scif1 { ++ groups = "scif1_data_b"; ++ function = "scif1"; ++ }; ++ + hscif0_pins: hscif0 { -+ groups = "hscif0_data"; ++ groups = "hscif0_data", "hscif0_ctrl"; + function = "hscif0"; + }; + @@ -131,14 +153,49 @@ index 0000000..f77ef0f + groups = "hscif1_data_a", "hscif1_ctrl_a"; + function = "hscif1"; + }; ++ ++ du_pins: du { ++ groups = "du_rgb888", "du_sync", "du_clk_out_0", "du_disp"; ++ function = "du"; ++ }; ++}; ++ ++&du { ++ pinctrl-0 = <&du_pins>; ++ pinctrl-names = "default"; ++ ++ ports { ++ port@0 { ++ endpoint { ++ remote-endpoint = <&adv7513_in>; ++ }; ++ }; ++ port@1 { ++ endpoint { ++ remote-endpoint = <&rcar_dw_hdmi0_in>; ++ }; ++ }; ++ }; +}; + +&gpio0 { ++ /delete-node/video_a_irq; ++ /delete-node/video_b_irq; + /delete-node/gpioext_2_20_irq; +}; + +&gpio1 { + /delete-node/gpioext_2_21_irq; ++ /delete-node/wifi_irq; ++}; ++ ++&gpio2 { ++ bl_pwm { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "BL PWM 100%"; ++ }; +}; + +&gpio5 { @@ -166,6 +223,28 @@ index 0000000..f77ef0f + /delete-node/gpioext_2_21_irq; +}; + ++&scif1 { ++ pinctrl-0 = <&scif1_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++}; ++ ++&hscif0 { ++ pinctrl-0 = <&hscif0_pins>; ++ pinctrl-names = "default"; ++ ctsrts; ++ ++ status = "okay"; ++}; ++ ++&hscif1 { ++ pinctrl-0 = <&hscif1_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++}; ++ +&hscif4 { + /delete-property/pinctrl-0; + /delete-property/pinctrl-names; @@ -182,6 +261,9 @@ index 0000000..f77ef0f + reg = <0x74>; + gpio-controller; + #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio6>; ++ interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + hub_pwen { + gpio-hog; @@ -195,6 +277,30 @@ index 0000000..f77ef0f + output-high; + line-name = "HUB rst"; + }; ++ otg_offvbus { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "OTG off VBUSn"; ++ }; ++ otg_extlpn { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "OTG EXTLPn"; ++ }; ++ otg_stat1 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "OTG Stat1"; ++ }; ++ otg_stat2 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "OTG Stat2"; ++ }; + }; + + gpio_ext_75: pca9539@75 { @@ -202,12 +308,68 @@ index 0000000..f77ef0f + reg = <0x75>; + gpio-controller; + #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio6>; ++ interrupts = <4 IRQ_TYPE_EDGE_FALLING>; ++ ++ gps_rst { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "GPS rst"; ++ }; ++ fpdl_shdn { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "FPDLink shdn"; ++ }; + }; +}; + +&i2cswitch2 { + reg = <0x71>; + reset-gpios= <&gpio5 3 GPIO_ACTIVE_LOW>; ++ ++ i2c@4 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <4>; ++ ++ hdmi@3d { ++ compatible = "adi,adv7511w"; ++ reg = <0x3d>; ++ interrupt-parent = <&gpio2>; ++ interrupts = <0 IRQ_TYPE_EDGE_BOTH>; ++ pd-gpios = <&gpio_ext_75 5 GPIO_ACTIVE_LOW>; ++ ++ adi,input-depth = <8>; ++ adi,input-colorspace = "rgb"; ++ adi,input-clock = "1x"; ++ adi,input-style = <1>; ++ adi,input-justification = "evenly"; ++ adi,clock-delay = <1200>; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ adv7513_in: endpoint { ++ remote-endpoint = <&du_out_rgb>; ++ }; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ adv7513_out: endpoint { ++ remote-endpoint = <&hdmi_con>; ++ }; ++ }; ++ }; ++ }; ++ }; +}; + +&i2c4 { @@ -218,13 +380,9 @@ index 0000000..f77ef0f + reg = <0x76>; + gpio-controller; + #gpio-cells = <2>; -+ }; -+ -+ gpio_ext_77: pca9539@77 { -+ compatible = "nxp,pca9539"; -+ reg = <0x77>; -+ gpio-controller; -+ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio7>; ++ interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + + port_b_a0 { + gpio-hog; @@ -250,6 +408,7 @@ index 0000000..f77ef0f + output-high; + line-name = "Video-A A1"; + }; ++ /* 0 - FPDLink output, 1 - LVDS output */ + lvds_vs_fpdl { + gpio-hog; + gpios = <14 GPIO_ACTIVE_HIGH>; @@ -257,6 +416,41 @@ index 0000000..f77ef0f + line-name = "LVDS switch"; + }; + }; ++ ++ gpio_ext_77: pca9539@77 { ++ compatible = "nxp,pca9539"; ++ reg = <0x77>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio5>; ++ interrupts = <9 IRQ_TYPE_EDGE_FALLING>; ++ ++ mpcie_wake { ++ gpio-hog; ++ gpios = <0 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "mPCIe WAKE#"; ++ }; ++ mpcie_wdisable { ++ gpio-hog; ++ gpios = <1 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "mPCIe W_DISABLE"; ++ }; ++ mpcie_clreq { ++ gpio-hog; ++ gpios = <2 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "mPCIe CLKREQ#"; ++ }; ++ mpcie_ovc { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "mPCIe OVC"; ++ }; ++ }; +}; + +&i2cswitch4 { @@ -269,10 +463,10 @@ index 0000000..f77ef0f +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts new file mode 100644 -index 0000000..a61d752 +index 0000000..1e11768 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts -@@ -0,0 +1,1151 @@ +@@ -0,0 +1,1155 @@ +/* + * Device Tree Source for the M3ULCB Kingfisher board on r8a7796 + * @@ -1395,6 +1589,10 @@ index 0000000..a61d752 + status = "okay"; +}; + ++&msiof1 { ++ status = "disabled"; ++}; ++ +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0041-arm64-dts-r8a7795-h3ulcb-kf-add-ADAS-board.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0041-arm64-dts-r8a7795-h3ulcb-kf-add-ADAS-board.patch index 2e307e8..cd3c5ee 100644 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0041-arm64-dts-r8a7795-h3ulcb-kf-add-ADAS-board.patch +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0041-arm64-dts-r8a7795-h3ulcb-kf-add-ADAS-board.patch @@ -3,14 +3,14 @@ From: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Date: Wed, 4 Jan 2017 10:37:23 +0300 Subject: [PATCH] arm64: dts: r8a7795-h3ulcb-kf: add ADAS board -H3ULCB.View board on R8A7795 SoC +Kingfisher board on R8A7795 SoC Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> --- arch/arm64/boot/dts/renesas/Makefile | 1 + - .../boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts | 240 +++ - arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts | 1619 ++++++++++++++++++++ - 3 files changed, 1860 insertions(+) + .../boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts | 429 ++++++ + arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts | 1623 ++++++++++++++++++++ + 3 files changed, 2053 insertions(+) create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts @@ -28,10 +28,10 @@ index d163df7..86a08db 100644 clean-files := *.dtb diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts new file mode 100644 -index 0000000..3485652 +index 0000000..1d64e6c --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts -@@ -0,0 +1,240 @@ +@@ -0,0 +1,429 @@ +/* + * Device Tree Source for the H3ULCB Kingfisher V1 board + * @@ -51,6 +51,7 @@ index 0000000..3485652 + aliases { + serial1 = &hscif0; + serial2 = &hscif1; ++ serial3 = &scif1; + }; + + wlan_en: regulator@4 { @@ -118,17 +119,33 @@ index 0000000..3485652 + nshutdown_gpio = <343>; /* gpio_ext_74 pin 3 */ + /* serial1 */ + dev_name = "/dev/ttySC1"; -+ flow_cntrl = <0>; ++ flow_cntrl = <1>; + /* int div 8 hscif@26.6666656MHz */ + baud_rate = <3333332>; + }; ++ ++ hdmi-out { ++ compatible = "hdmi-connector"; ++ type = "a"; ++ ++ port { ++ hdmi_con: endpoint { ++ remote-endpoint = <&adv7513_out>; ++ }; ++ }; ++ }; +}; + +&pfc { + /delete-node/hscif4; + ++ scif1_pins: scif1 { ++ groups = "scif1_data_b"; ++ function = "scif1"; ++ }; ++ + hscif0_pins: hscif0 { -+ groups = "hscif0_data"; ++ groups = "hscif0_data", "hscif0_ctrl"; + function = "hscif0"; + }; + @@ -136,14 +153,49 @@ index 0000000..3485652 + groups = "hscif1_data_a", "hscif1_ctrl_a"; + function = "hscif1"; + }; ++ ++ du_pins: du { ++ groups = "du_rgb888", "du_sync", "du_clk_out_0", "du_disp"; ++ function = "du"; ++ }; ++}; ++ ++&du { ++ pinctrl-0 = <&du_pins>; ++ pinctrl-names = "default"; ++ ++ ports { ++ port@0 { ++ endpoint { ++ remote-endpoint = <&adv7513_in>; ++ }; ++ }; ++ port@1 { ++ endpoint { ++ remote-endpoint = <&rcar_dw_hdmi0_in>; ++ }; ++ }; ++ }; +}; + +&gpio0 { ++ /delete-node/video_a_irq; ++ /delete-node/video_b_irq; + /delete-node/gpioext_2_20_irq; +}; + +&gpio1 { + /delete-node/gpioext_2_21_irq; ++ /delete-node/wifi_irq; ++}; ++ ++&gpio2 { ++ bl_pwm { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "BL PWM 100%"; ++ }; +}; + +&gpio5 { @@ -171,6 +223,28 @@ index 0000000..3485652 + /delete-node/gpioext_2_21_irq; +}; + ++&scif1 { ++ pinctrl-0 = <&scif1_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++}; ++ ++&hscif0 { ++ pinctrl-0 = <&hscif0_pins>; ++ pinctrl-names = "default"; ++ ctsrts; ++ ++ status = "okay"; ++}; ++ ++&hscif1 { ++ pinctrl-0 = <&hscif1_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++}; ++ +&hscif4 { + /delete-property/pinctrl-0; + /delete-property/pinctrl-names; @@ -187,6 +261,9 @@ index 0000000..3485652 + reg = <0x74>; + gpio-controller; + #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio6>; ++ interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + + hub_pwen { + gpio-hog; @@ -200,6 +277,30 @@ index 0000000..3485652 + output-high; + line-name = "HUB rst"; + }; ++ otg_offvbus { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "OTG off VBUSn"; ++ }; ++ otg_extlpn { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "OTG EXTLPn"; ++ }; ++ otg_stat1 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "OTG Stat1"; ++ }; ++ otg_stat2 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "OTG Stat2"; ++ }; + }; + + gpio_ext_75: pca9539@75 { @@ -207,12 +308,68 @@ index 0000000..3485652 + reg = <0x75>; + gpio-controller; + #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio6>; ++ interrupts = <4 IRQ_TYPE_EDGE_FALLING>; ++ ++ gps_rst { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "GPS rst"; ++ }; ++ fpdl_shdn { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "FPDLink shdn"; ++ }; + }; +}; + +&i2cswitch2 { + reg = <0x71>; + reset-gpios= <&gpio5 3 GPIO_ACTIVE_LOW>; ++ ++ i2c@4 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <4>; ++ ++ hdmi@3d { ++ compatible = "adi,adv7511w"; ++ reg = <0x3d>; ++ interrupt-parent = <&gpio2>; ++ interrupts = <0 IRQ_TYPE_EDGE_BOTH>; ++ pd-gpios = <&gpio_ext_75 5 GPIO_ACTIVE_LOW>; ++ ++ adi,input-depth = <8>; ++ adi,input-colorspace = "rgb"; ++ adi,input-clock = "1x"; ++ adi,input-style = <1>; ++ adi,input-justification = "evenly"; ++ adi,clock-delay = <1200>; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ adv7513_in: endpoint { ++ remote-endpoint = <&du_out_rgb>; ++ }; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ adv7513_out: endpoint { ++ remote-endpoint = <&hdmi_con>; ++ }; ++ }; ++ }; ++ }; ++ }; +}; + +&i2c4 { @@ -223,13 +380,9 @@ index 0000000..3485652 + reg = <0x76>; + gpio-controller; + #gpio-cells = <2>; -+ }; -+ -+ gpio_ext_77: pca9539@77 { -+ compatible = "nxp,pca9539"; -+ reg = <0x77>; -+ gpio-controller; -+ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio7>; ++ interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + + port_b_a0 { + gpio-hog; @@ -255,6 +408,7 @@ index 0000000..3485652 + output-high; + line-name = "Video-A A1"; + }; ++ /* 0 - FPDLink output, 1 - LVDS output */ + lvds_vs_fpdl { + gpio-hog; + gpios = <14 GPIO_ACTIVE_HIGH>; @@ -262,6 +416,41 @@ index 0000000..3485652 + line-name = "LVDS switch"; + }; + }; ++ ++ gpio_ext_77: pca9539@77 { ++ compatible = "nxp,pca9539"; ++ reg = <0x77>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio5>; ++ interrupts = <9 IRQ_TYPE_EDGE_FALLING>; ++ ++ mpcie_wake { ++ gpio-hog; ++ gpios = <0 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "mPCIe WAKE#"; ++ }; ++ mpcie_wdisable { ++ gpio-hog; ++ gpios = <1 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "mPCIe W_DISABLE"; ++ }; ++ mpcie_clreq { ++ gpio-hog; ++ gpios = <2 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "mPCIe CLKREQ#"; ++ }; ++ mpcie_ovc { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "mPCIe OVC"; ++ }; ++ }; +}; + +&i2cswitch4 { @@ -274,10 +463,10 @@ index 0000000..3485652 +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts new file mode 100644 -index 0000000..738ce21 +index 0000000..7b6c9bc --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts -@@ -0,0 +1,1619 @@ +@@ -0,0 +1,1623 @@ +/* + * Device Tree Source for the H3ULCB Kingfisher board on r8a7795 + * @@ -1868,6 +2057,10 @@ index 0000000..738ce21 + status = "okay"; +}; + ++&msiof1 { ++ status = "disabled"; ++}; ++ +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/h3ulcb.cfg b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/h3ulcb.cfg index f8f1a3b..dc052de 100644 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/h3ulcb.cfg +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/h3ulcb.cfg @@ -14,6 +14,7 @@ CONFIG_FIXED_PHY=y CONFIG_SPI_BITBANG=y CONFIG_SPI_GPIO=y CONFIG_GPIO_MAX732X=y +CONFIG_GPIO_MAX732X_IRQ=y CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCA953X_IRQ=y CONFIG_VIDEO_ADV_DEBUG=y @@ -45,6 +46,21 @@ CONFIG_WL18XX=m CONFIG_WLCORE=m CONFIG_WLCORE_SDIO=m CONFIG_SND_SOC_SI468X=y +CONFIG_SND_SOC_PCM3168A=y +CONFIG_SND_SOC_PCM3168A_I2C=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_PROPERTIES=y CONFIG_HID_MULTITOUCH=y +CONFIG_IIO=y +CONFIG_IIO_ST_ACCEL_3AXIS=y +CONFIG_IIO_ST_ACCEL_I2C_3AXIS=y +CONFIG_IIO_ST_ACCEL_SPI_3AXIS=y +CONFIG_IIO_ST_SENSORS_I2C=y +CONFIG_IIO_ST_SENSORS_SPI=y +CONFIG_IIO_ST_SENSORS_CORE=y +CONFIG_IIO_ST_GYRO_3AXIS=y +CONFIG_IIO_ST_GYRO_I2C_3AXIS=y +CONFIG_IIO_ST_GYRO_SPI_3AXIS=y +CONFIG_IIO_ST_MAGN_3AXIS=y +CONFIG_IIO_ST_MAGN_I2C_3AXIS=y +CONFIG_IIO_ST_MAGN_SPI_3AXIS=y diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/m3ulcb.cfg b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/m3ulcb.cfg index f8f1a3b..dc052de 100644 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/m3ulcb.cfg +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/m3ulcb.cfg @@ -14,6 +14,7 @@ CONFIG_FIXED_PHY=y CONFIG_SPI_BITBANG=y CONFIG_SPI_GPIO=y CONFIG_GPIO_MAX732X=y +CONFIG_GPIO_MAX732X_IRQ=y CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCA953X_IRQ=y CONFIG_VIDEO_ADV_DEBUG=y @@ -45,6 +46,21 @@ CONFIG_WL18XX=m CONFIG_WLCORE=m CONFIG_WLCORE_SDIO=m CONFIG_SND_SOC_SI468X=y +CONFIG_SND_SOC_PCM3168A=y +CONFIG_SND_SOC_PCM3168A_I2C=y CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_PROPERTIES=y CONFIG_HID_MULTITOUCH=y +CONFIG_IIO=y +CONFIG_IIO_ST_ACCEL_3AXIS=y +CONFIG_IIO_ST_ACCEL_I2C_3AXIS=y +CONFIG_IIO_ST_ACCEL_SPI_3AXIS=y +CONFIG_IIO_ST_SENSORS_I2C=y +CONFIG_IIO_ST_SENSORS_SPI=y +CONFIG_IIO_ST_SENSORS_CORE=y +CONFIG_IIO_ST_GYRO_3AXIS=y +CONFIG_IIO_ST_GYRO_I2C_3AXIS=y +CONFIG_IIO_ST_GYRO_SPI_3AXIS=y +CONFIG_IIO_ST_MAGN_3AXIS=y +CONFIG_IIO_ST_MAGN_I2C_3AXIS=y +CONFIG_IIO_ST_MAGN_SPI_3AXIS=y |