diff options
Diffstat (limited to 'meta-rcar-gen3-adas/recipes-kernel/linux')
5 files changed, 868 insertions, 402 deletions
diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0024-wl18xx-do-not-invert-IRQ-on-WLxxxx-side.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0024-wl18xx-do-not-invert-IRQ-on-WLxxxx-side.patch new file mode 100644 index 0000000..f956c58 --- /dev/null +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0024-wl18xx-do-not-invert-IRQ-on-WLxxxx-side.patch @@ -0,0 +1,48 @@ +From 60d86113a92ac35421865f9b8db504530962c829 Mon Sep 17 00:00:00 2001 +From: Andrey Gusakov <andrey.gusakov@cogentembedded.com> +Date: Mon, 22 May 2017 17:22:38 +0300 +Subject: [PATCH] wl18xx: do not invert IRQ on WLxxxx side + + +Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com> +--- + drivers/net/wireless/ti/wl18xx/main.c | 8 ++++++++ + 1 file changed, 8 insertions(+) + +diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c +index ae47c79..cdde6e0 100644 +--- a/drivers/net/wireless/ti/wl18xx/main.c ++++ b/drivers/net/wireless/ti/wl18xx/main.c +@@ -876,7 +876,9 @@ static int wl18xx_pre_upload(struct wl1271 *wl) + { + u32 tmp; + int ret; ++#if 0 + u16 irq_invert; ++#endif + + BUILD_BUG_ON(sizeof(struct wl18xx_mac_and_phy_params) > + WL18XX_PHY_INIT_MEM_SIZE); +@@ -929,6 +931,11 @@ static int wl18xx_pre_upload(struct wl1271 *wl) + if (ret < 0) + goto out; + ++#if 0 ++ /* We have level translator with inversion on IRQ line so we ++ * set IRQ_TYPE_EDGE_FALLING in DTS, but we do not need to ++ * invert IRQ logic on WLxxxx side! ++ */ + ret = irq_get_trigger_type(wl->irq); + if ((ret == IRQ_TYPE_LEVEL_LOW) || (ret == IRQ_TYPE_EDGE_FALLING)) { + wl1271_info("using inverted interrupt logic: %d", ret); +@@ -948,6 +955,7 @@ static int wl18xx_pre_upload(struct wl1271 *wl) + + ret = wlcore_set_partition(wl, &wl->ptable[PART_PHY_INIT]); + } ++#endif + + out: + return ret; +-- +1.7.10.4 + diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0034-arm64-dts-r8a7795-es1-h3ulcb-kf-add-ADAS-board.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0034-arm64-dts-r8a7795-es1-h3ulcb-kf-add-ADAS-board.patch index 985863a..e558d23 100644 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0034-arm64-dts-r8a7795-es1-h3ulcb-kf-add-ADAS-board.patch +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0034-arm64-dts-r8a7795-es1-h3ulcb-kf-add-ADAS-board.patch @@ -8,28 +8,276 @@ H3ULCB.View board on R8A7795 ES1.x SoC Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> --- arch/arm64/boot/dts/renesas/Makefile | 1 + - .../boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts | 1683 ++++++++++++++++++++ - 2 files changed, 1684 insertions(+) + .../boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts | 240 +++ + .../boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts | 1569 ++++++++++++++++++++ + 3 files changed, 1810 insertions(+) + create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile -index 06207e3..a5dd1d3 100644 +index 51a4ac9..24f8036 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile -@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-view.dtb +@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x-view.dtb dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-view.dtb dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-had-alfa.dtb r8a7795-es1-h3ulcb-had-beta.dtb -+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-kf.dtb ++dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-kf.dtb r8a7795-es1-h3ulcb-kf-v1.dtb always := $(dtb-y) clean-files := *.dtb +diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts +new file mode 100644 +index 0000000..0c6cca7 +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts +@@ -0,0 +1,240 @@ ++/* ++ * Device Tree Source for the H3ULCB Kingfisher V1 board on r8a7795 ES1.x ++ * ++ * Copyright (C) 2017 Renesas Electronics Corp. ++ * Copyright (C) 2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++#include "r8a7795-es1-h3ulcb-kf.dts" ++ ++/ { ++ model = "Renesas H3ULCB Kingfisher V1 board based on r8a7795"; ++ ++ aliases { ++ serial1 = &hscif0; ++ serial2 = &hscif1; ++ }; ++ ++ wlan_en: regulator@4 { ++ compatible = "regulator-fixed"; ++ regulator-name = "wlan-en-regulator"; ++ ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_74 4 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ }; ++ ++ codec_en_reg: regulator@6 { ++ compatible = "regulator-fixed"; ++ regulator-name = "codec-en-regulator"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_74 15 0>; ++ ++ /* delay - CHECK */ ++ startup-delay-us = <70000>; ++ enable-active-high; ++ }; ++ ++ amp_en_reg: regulator@7 { ++ compatible = "regulator-fixed"; ++ regulator-name = "amp-en-regulator"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_74 0 0>; ++ ++ startup-delay-us = <0>; ++ enable-active-high; ++ }; ++ ++ /delete-node/regulator@8; ++ ++ sdio_switch: regulator@9 { ++ compatible = "regulator-fixed"; ++ regulator-name = "wifi_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_74 5 0>; ++ enable-active-low; ++ regulator-always-on; ++ }; ++ ++ /delete-node/regulator@10; ++ ++ radio_switch: regulator@11 { ++ compatible = "regulator-fixed"; ++ regulator-name = "radio_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_74 13 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ kim { ++ compatible = "kim"; ++ nshutdown_gpio = <343>; /* gpio_ext_74 pin 3 */ ++ /* serial1 */ ++ dev_name = "/dev/ttySC1"; ++ flow_cntrl = <0>; ++ /* int div 8 hscif@26.6666656MHz */ ++ baud_rate = <3333332>; ++ }; ++}; ++ ++&pfc { ++ /delete-node/hscif4; ++ ++ hscif0_pins: hscif0 { ++ groups = "hscif0_data"; ++ function = "hscif0"; ++ }; ++ ++ hscif1_pins: hscif1 { ++ groups = "hscif1_data_a", "hscif1_ctrl_a"; ++ function = "hscif1"; ++ }; ++}; ++ ++&gpio0 { ++ /delete-node/gpioext_2_20_irq; ++}; ++ ++&gpio1 { ++ /delete-node/gpioext_2_21_irq; ++}; ++ ++&gpio5 { ++ /delete-node/touch_irq; ++ /delete-node/bt_strap; ++ ++ /* V1 has h/w bug with swapped RTS and CTS on BT interface */ ++ /* Ignore these pins */ ++ hscif0_cts { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "hscif0 CTS"; ++ }; ++ ++ hscif0_rts { ++ gpio-hog; ++ gpios = <16 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "hscif0 RTS"; ++ }; ++}; ++ ++&gpio7 { ++ /delete-node/gpioext_2_21_irq; ++}; ++ ++&hscif4 { ++ /delete-property/pinctrl-0; ++ /delete-property/pinctrl-names; ++ ++ status = "disabled"; ++}; ++ ++&i2c2 { ++ /delete-node/pca9535@20; ++ /delete-node/pca9535@21; ++ ++ gpio_ext_74: pca9539@74 { ++ compatible = "nxp,pca9539"; ++ reg = <0x74>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ hub_pwen { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "HUB pwen"; ++ }; ++ hub_rst { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "HUB rst"; ++ }; ++ }; ++ ++ gpio_ext_75: pca9539@75 { ++ compatible = "nxp,pca9539"; ++ reg = <0x75>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ }; ++}; ++ ++&i2cswitch2 { ++ reg = <0x71>; ++ reset-gpios= <&gpio5 3 GPIO_ACTIVE_LOW>; ++}; ++ ++&i2c4 { ++ /delete-node/pca9535@21; ++ ++ gpio_ext_76: pca9539@76 { ++ compatible = "nxp,pca9539"; ++ reg = <0x76>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ }; ++ ++ gpio_ext_77: pca9539@77 { ++ compatible = "nxp,pca9539"; ++ reg = <0x77>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ port_b_a0 { ++ gpio-hog; ++ gpios = <0 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B A0"; ++ }; ++ port_b_a1 { ++ gpio-hog; ++ gpios = <1 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B A1"; ++ }; ++ port_a_a0 { ++ gpio-hog; ++ gpios = <2 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A A0"; ++ }; ++ port_a_a1 { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A A1"; ++ }; ++ lvds_vs_fpdl { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "LVDS switch"; ++ }; ++ }; ++}; ++ ++&i2cswitch4 { ++ reg = <0x71>; ++ reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>; ++}; ++ ++&wlcore { ++ interrupts = <25 IRQ_TYPE_EDGE_FALLING>; ++}; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts new file mode 100644 -index 0000000..50a37e0 +index 0000000..fdc0b5a --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts -@@ -0,0 +1,1683 @@ +@@ -0,0 +1,1569 @@ +/* + * Device Tree Source for the H3ULCB Kingfisher board on r8a7795 ES1.x + * @@ -222,69 +470,6 @@ index 0000000..50a37e0 + }; + }; + -+ sound_amp: sound@3 { -+ pinctrl-0 = <&sound_9_pins>; -+ pinctrl-names = "default"; -+ compatible = "simple-audio-card"; -+ -+ simple-audio-card,name = "power_amp"; -+ -+ simple-audio-card,dai-link@0 { -+ format = "i2s"; -+ cpu { -+ sound-dai = <&rcar_sound 3>; -+ }; -+ codec { -+ sound-dai = <&max98371_L>; -+ }; -+ }; -+ simple-audio-card,dai-link@1 { -+ format = "i2s"; -+ cpu { -+ sound-dai = <&rcar_sound 3>; -+ }; -+ codec { -+ sound-dai = <&max98371_R>; -+ }; -+ }; -+ simple-audio-card,dai-link@2 { -+ format = "i2s"; -+ cpu { -+ sound-dai = <&rcar_sound 3>; -+ }; -+ codec { -+ sound-dai = <&max98371_RL>; -+ }; -+ }; -+ simple-audio-card,dai-link@3 { -+ format = "i2s"; -+ cpu { -+ sound-dai = <&rcar_sound 3>; -+ }; -+ codec { -+ sound-dai = <&max98371_RR>; -+ }; -+ }; -+ simple-audio-card,dai-link@4 { -+ format = "i2s"; -+ cpu { -+ sound-dai = <&rcar_sound 3>; -+ }; -+ codec { -+ sound-dai = <&max98371_C>; -+ }; -+ }; -+ simple-audio-card,dai-link@5 { -+ format = "i2s"; -+ cpu { -+ sound-dai = <&rcar_sound 3>; -+ }; -+ codec { -+ sound-dai = <&max98371_S>; -+ }; -+ }; -+ }; -+ + lvds-encoder { + compatible = "thine,thc63lvdm83d"; + @@ -367,11 +552,6 @@ index 0000000..50a37e0 + function = "ssi"; + }; + -+ sound_9_pins: sound2 { -+ groups = "ssi9_ctrl_b", "ssi9_data_b"; -+ function = "ssi"; -+ }; -+ + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; @@ -476,7 +656,7 @@ index 0000000..50a37e0 + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; + }; + -+ i2cswitch2@74 { ++ i2cswitch2: pca9548@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; @@ -502,37 +682,6 @@ index 0000000..50a37e0 + #size-cells = <0>; + reg = <2>; + /* Power amp node(s) */ -+ -+ max98371_L: max98371@0x31 { -+ compatible = "maxim,max98371"; -+ reg = <0x31>; -+ #sound-dai-cells = <0>; -+ }; -+ max98371_R: max98371@0x32 { -+ compatible = "maxim,max98371"; -+ reg = <0x32>; -+ #sound-dai-cells = <0>; -+ }; -+ max98371_RL: max98371@0x33 { -+ compatible = "maxim,max98371"; -+ reg = <0x33>; -+ #sound-dai-cells = <0>; -+ }; -+ max98371_RR: max98371@0x34 { -+ compatible = "maxim,max98371"; -+ reg = <0x34>; -+ #sound-dai-cells = <0>; -+ }; -+ max98371_C: max98371@0x35 { -+ compatible = "maxim,max98371"; -+ reg = <0x35>; -+ #sound-dai-cells = <0>; -+ }; -+ max98371_S: max98371@0x36 { -+ compatible = "maxim,max98371"; -+ reg = <0x36>; -+ #sound-dai-cells = <0>; -+ }; + }; + + i2c@3 { @@ -617,7 +766,7 @@ index 0000000..50a37e0 + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + }; + -+ i2cswitch4@74 { ++ i2cswitch4: pca9548@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; @@ -635,7 +784,7 @@ index 0000000..50a37e0 + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; -+ /* Video input "A" acc node(s) */ ++ /* Slot A (CN10) */ + + ov106xx@0 { + compatible = "ovti,ov106xx"; @@ -731,6 +880,7 @@ index 0000000..50a37e0 + ti964-ti9x3@0 { + compatible = "ti,ti964-ti9x3"; + reg = <0x3a>; ++ gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; + ti,sensor_delay = <350>; + ti,links = <4>; + ti,lanes = <4>; @@ -844,7 +994,7 @@ index 0000000..50a37e0 + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; -+ /* Video input "B" acc node(s) */ ++ /* Slot B (CN11) */ + + ov106xx@4 { + compatible = "ovti,ov106xx"; @@ -940,6 +1090,7 @@ index 0000000..50a37e0 + ti964-ti9x3@1 { + compatible = "ti,ti964-ti9x3"; + reg = <0x3a>; ++ gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>; + ti,sensor_delay = <350>; + ti,links = <4>; + ti,lanes = <4>; @@ -1049,32 +1200,11 @@ index 0000000..50a37e0 + }; + }; + -+ i2c@3 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <3>; -+ /* MOST node(s) */ -+ }; -+ -+ i2c@4 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <4>; -+ /* CSI camera node(s) */ -+ }; -+ -+ i2c@5 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <5>; -+ /* CMOS camera node(s) */ -+ }; -+ + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; -+ /* Video input "B" main node(s) */ ++ /* Slot B (CN11) */ + + video_b_ext0: pca9535@27 { + compatible = "nxp,pca9535"; @@ -1180,6 +1310,12 @@ index 0000000..50a37e0 + output-high; + line-name = "Video-B PWR1"; + }; ++ video_b_cam_pwr3 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR3"; ++ }; + }; + }; + @@ -1187,7 +1323,7 @@ index 0000000..50a37e0 + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; -+ /* Video input "A" main node(s) */ ++ /* Slot A (CN10) */ + + video_a_ext0: pca9535@26 { + compatible = "nxp,pca9535"; @@ -1293,6 +1429,12 @@ index 0000000..50a37e0 + output-high; + line-name = "Video-A PWR1"; + }; ++ video_a_cam_pwr3 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR3"; ++ }; + }; + }; + }; @@ -1659,10 +1801,6 @@ index 0000000..50a37e0 + dai2 { + capture = <&ssi6>; + }; -+ -+ dai3 { -+ playback = <&ssi9>; -+ }; + }; +}; + @@ -1691,10 +1829,6 @@ index 0000000..50a37e0 + }; +}; + -+&xhci0 { -+ status = "okay"; -+}; -+ +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0037-arm64-dts-r8a7796-m3ulcb-kf-add-ADAS-board.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0037-arm64-dts-r8a7796-m3ulcb-kf-add-ADAS-board.patch index 92d3bf5..8d2cde9 100644 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0037-arm64-dts-r8a7796-m3ulcb-kf-add-ADAS-board.patch +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0037-arm64-dts-r8a7796-m3ulcb-kf-add-ADAS-board.patch @@ -7,29 +7,272 @@ M3ULCB.View board on R8A7796 Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> --- - arch/arm64/boot/dts/renesas/Makefile | 1 + - arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts | 1197 +++++++++++++++++++++ - 2 files changed, 1198 insertions(+) + arch/arm64/boot/dts/renesas/Makefile | 1 + + .../boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts | 235 +++++ + arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts | 1103 ++++++++++++++++++++ + 3 files changed, 1339 insertions(+) + create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile -index a5dd1d3..5cb7eb1 100644 +index 5d99267..e41b5b3 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile -@@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-had.dtb - dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-kf.dtb +@@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-had-alfa.dtb r8a7795-es1-h3ulcb + dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-kf.dtb r8a7795-es1-h3ulcb-kf-v1.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x-view.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-view.dtb -+dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb ++dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb r8a7796-m3ulcb-kf-v1.dtb always := $(dtb-y) clean-files := *.dtb +diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts +new file mode 100644 +index 0000000..f77ef0f +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts +@@ -0,0 +1,235 @@ ++/* ++ * Device Tree Source for the M3ULCB Kingfisher V1 board ++ * ++ * Copyright (C) 2017 Renesas Electronics Corp. ++ * Copyright (C) 2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++#include "r8a7796-m3ulcb-kf.dts" ++ ++/ { ++ model = "Renesas M3ULCB Kingfisher V1 board based on r8a7796"; ++ ++ wlan_en: regulator@4 { ++ compatible = "regulator-fixed"; ++ regulator-name = "wlan-en-regulator"; ++ ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_74 4 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ }; ++ ++ codec_en_reg: regulator@6 { ++ compatible = "regulator-fixed"; ++ regulator-name = "codec-en-regulator"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_74 15 0>; ++ ++ /* delay - CHECK */ ++ startup-delay-us = <70000>; ++ enable-active-high; ++ }; ++ ++ amp_en_reg: regulator@7 { ++ compatible = "regulator-fixed"; ++ regulator-name = "amp-en-regulator"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_74 0 0>; ++ ++ startup-delay-us = <0>; ++ enable-active-high; ++ }; ++ ++ /delete-node/regulator@8; ++ ++ sdio_switch: regulator@9 { ++ compatible = "regulator-fixed"; ++ regulator-name = "wifi_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_74 5 0>; ++ enable-active-low; ++ regulator-always-on; ++ }; ++ ++ /delete-node/regulator@10; ++ ++ radio_switch: regulator@11 { ++ compatible = "regulator-fixed"; ++ regulator-name = "radio_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_74 13 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ kim { ++ compatible = "kim"; ++ nshutdown_gpio = <343>; /* gpio_ext_74 pin 3 */ ++ /* serial1 */ ++ dev_name = "/dev/ttySC1"; ++ flow_cntrl = <0>; ++ /* int div 8 hscif@26.6666656MHz */ ++ baud_rate = <3333332>; ++ }; ++}; ++ ++&pfc { ++ /delete-node/hscif4; ++ ++ hscif0_pins: hscif0 { ++ groups = "hscif0_data"; ++ function = "hscif0"; ++ }; ++ ++ hscif1_pins: hscif1 { ++ groups = "hscif1_data_a", "hscif1_ctrl_a"; ++ function = "hscif1"; ++ }; ++}; ++ ++&gpio0 { ++ /delete-node/gpioext_2_20_irq; ++}; ++ ++&gpio1 { ++ /delete-node/gpioext_2_21_irq; ++}; ++ ++&gpio5 { ++ /delete-node/touch_irq; ++ /delete-node/bt_strap; ++ ++ /* V1 has h/w bug with swapped RTS and CTS on BT interface */ ++ /* Ignore these pins */ ++ hscif0_cts { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "hscif0 CTS"; ++ }; ++ ++ hscif0_rts { ++ gpio-hog; ++ gpios = <16 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "hscif0 RTS"; ++ }; ++}; ++ ++&gpio7 { ++ /delete-node/gpioext_2_21_irq; ++}; ++ ++&hscif4 { ++ /delete-property/pinctrl-0; ++ /delete-property/pinctrl-names; ++ ++ status = "disabled"; ++}; ++ ++&i2c2 { ++ /delete-node/pca9535@20; ++ /delete-node/pca9535@21; ++ ++ gpio_ext_74: pca9539@74 { ++ compatible = "nxp,pca9539"; ++ reg = <0x74>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ hub_pwen { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "HUB pwen"; ++ }; ++ hub_rst { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "HUB rst"; ++ }; ++ }; ++ ++ gpio_ext_75: pca9539@75 { ++ compatible = "nxp,pca9539"; ++ reg = <0x75>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ }; ++}; ++ ++&i2cswitch2 { ++ reg = <0x71>; ++ reset-gpios= <&gpio5 3 GPIO_ACTIVE_LOW>; ++}; ++ ++&i2c4 { ++ /delete-node/pca9535@21; ++ ++ gpio_ext_76: pca9539@76 { ++ compatible = "nxp,pca9539"; ++ reg = <0x76>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ }; ++ ++ gpio_ext_77: pca9539@77 { ++ compatible = "nxp,pca9539"; ++ reg = <0x77>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ port_b_a0 { ++ gpio-hog; ++ gpios = <0 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B A0"; ++ }; ++ port_b_a1 { ++ gpio-hog; ++ gpios = <1 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B A1"; ++ }; ++ port_a_a0 { ++ gpio-hog; ++ gpios = <2 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A A0"; ++ }; ++ port_a_a1 { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A A1"; ++ }; ++ lvds_vs_fpdl { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "LVDS switch"; ++ }; ++ }; ++}; ++ ++&i2cswitch4 { ++ reg = <0x71>; ++ reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>; ++}; ++ ++&wlcore { ++ interrupts = <25 IRQ_TYPE_EDGE_FALLING>; ++}; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts new file mode 100644 -index 0000000..ffaef74 +index 0000000..82faaa1 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts -@@ -0,0 +1,1197 @@ +@@ -0,0 +1,1103 @@ +/* + * Device Tree Source for the M3ULCB Kingfisher board on r8a7796 + * @@ -222,69 +465,6 @@ index 0000000..ffaef74 + }; + }; + -+ sound_amp: sound@3 { -+ pinctrl-0 = <&sound_9_pins>; -+ pinctrl-names = "default"; -+ compatible = "simple-audio-card"; -+ -+ simple-audio-card,name = "power_amp"; -+ -+ simple-audio-card,dai-link@0 { -+ format = "i2s"; -+ cpu { -+ sound-dai = <&rcar_sound 3>; -+ }; -+ codec { -+ sound-dai = <&max98371_L>; -+ }; -+ }; -+ simple-audio-card,dai-link@1 { -+ format = "i2s"; -+ cpu { -+ sound-dai = <&rcar_sound 3>; -+ }; -+ codec { -+ sound-dai = <&max98371_R>; -+ }; -+ }; -+ simple-audio-card,dai-link@2 { -+ format = "i2s"; -+ cpu { -+ sound-dai = <&rcar_sound 3>; -+ }; -+ codec { -+ sound-dai = <&max98371_RL>; -+ }; -+ }; -+ simple-audio-card,dai-link@3 { -+ format = "i2s"; -+ cpu { -+ sound-dai = <&rcar_sound 3>; -+ }; -+ codec { -+ sound-dai = <&max98371_RR>; -+ }; -+ }; -+ simple-audio-card,dai-link@4 { -+ format = "i2s"; -+ cpu { -+ sound-dai = <&rcar_sound 3>; -+ }; -+ codec { -+ sound-dai = <&max98371_C>; -+ }; -+ }; -+ simple-audio-card,dai-link@5 { -+ format = "i2s"; -+ cpu { -+ sound-dai = <&rcar_sound 3>; -+ }; -+ codec { -+ sound-dai = <&max98371_S>; -+ }; -+ }; -+ }; -+ + lvds-encoder { + compatible = "thine,thc63lvdm83d"; + @@ -367,11 +547,6 @@ index 0000000..ffaef74 + function = "ssi"; + }; + -+ sound_9_pins: sound2 { -+ groups = "ssi9_ctrl_b", "ssi9_data_b"; -+ function = "ssi"; -+ }; -+ + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; @@ -476,7 +651,7 @@ index 0000000..ffaef74 + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; + }; + -+ i2cswitch2@74 { ++ i2cswitch2: pca9548@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; @@ -502,37 +677,6 @@ index 0000000..ffaef74 + #size-cells = <0>; + reg = <2>; + /* Power amp node(s) */ -+ -+ max98371_L: max98371@0x31 { -+ compatible = "maxim,max98371"; -+ reg = <0x31>; -+ #sound-dai-cells = <0>; -+ }; -+ max98371_R: max98371@0x32 { -+ compatible = "maxim,max98371"; -+ reg = <0x32>; -+ #sound-dai-cells = <0>; -+ }; -+ max98371_RL: max98371@0x33 { -+ compatible = "maxim,max98371"; -+ reg = <0x33>; -+ #sound-dai-cells = <0>; -+ }; -+ max98371_RR: max98371@0x34 { -+ compatible = "maxim,max98371"; -+ reg = <0x34>; -+ #sound-dai-cells = <0>; -+ }; -+ max98371_C: max98371@0x35 { -+ compatible = "maxim,max98371"; -+ reg = <0x35>; -+ #sound-dai-cells = <0>; -+ }; -+ max98371_S: max98371@0x36 { -+ compatible = "maxim,max98371"; -+ reg = <0x36>; -+ #sound-dai-cells = <0>; -+ }; + }; + + i2c@3 { @@ -617,7 +761,7 @@ index 0000000..ffaef74 + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + }; + -+ i2cswitch4@74 { ++ i2cswitch4: pca9548@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; @@ -635,7 +779,7 @@ index 0000000..ffaef74 + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; -+ /* Video input "A" acc node(s) */ ++ /* Slot A (CN10) */ + + ov106xx@0 { + compatible = "ovti,ov106xx"; @@ -731,6 +875,7 @@ index 0000000..ffaef74 + ti964-ti9x3@0 { + compatible = "ti,ti964-ti9x3"; + reg = <0x3a>; ++ gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; + ti,sensor_delay = <350>; + ti,links = <4>; + ti,lanes = <4>; @@ -865,7 +1010,7 @@ index 0000000..ffaef74 + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; -+ /* Video input "A" main node(s) */ ++ /* Slot A (CN10) */ + + video_a_ext0: pca9535@26 { + compatible = "nxp,pca9535"; @@ -971,6 +1116,18 @@ index 0000000..ffaef74 + output-high; + line-name = "Video-A PWR1"; + }; ++ video_b_cam_pwr { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR3"; ++ }; ++ video_a_cam_pwr3 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR3"; ++ }; + }; + }; + }; @@ -1173,10 +1330,6 @@ index 0000000..ffaef74 + dai2 { + capture = <&ssi6>; + }; -+ -+ dai3 { -+ playback = <&ssi9>; -+ }; + }; +}; + @@ -1205,10 +1358,6 @@ index 0000000..ffaef74 + }; +}; + -+&xhci0 { -+ status = "okay"; -+}; -+ +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0041-arm64-dts-r8a7795-h3ulcb-kf-add-ADAS-board.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0041-arm64-dts-r8a7795-h3ulcb-kf-add-ADAS-board.patch index 6898c49..a0144b7 100644 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0041-arm64-dts-r8a7795-h3ulcb-kf-add-ADAS-board.patch +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0041-arm64-dts-r8a7795-h3ulcb-kf-add-ADAS-board.patch @@ -8,28 +8,276 @@ H3ULCB.View board on R8A7795 SoC Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> --- arch/arm64/boot/dts/renesas/Makefile | 1 + - .../boot/dts/renesas/r8a7795-h3ulcb-kf.dts | 1683 ++++++++++++++++++++ - 2 files changed, 1684 insertions(+) + .../boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts | 240 +++ + arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts | 1565 ++++++++++++++++++++ + 3 files changed, 1806 insertions(+) + create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile -index 06207e3..a5dd1d3 100644 +index d163df7..86a08db 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile -@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-view.dtb +@@ -15,6 +15,7 @@ dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb r8a7796-m3ulcb-kf-v1.dtb dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x-view.dtb dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-view.dtb dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-had-alfa.dtb r8a7795-h3ulcb-had-beta.dtb -+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb ++dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb r8a7795-h3ulcb-kf-v1.dtb always := $(dtb-y) clean-files := *.dtb +diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts +new file mode 100644 +index 0000000..3485652 +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts +@@ -0,0 +1,240 @@ ++/* ++ * Device Tree Source for the H3ULCB Kingfisher V1 board ++ * ++ * Copyright (C) 2017 Renesas Electronics Corp. ++ * Copyright (C) 2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++#include "r8a7795-h3ulcb-kf.dts" ++ ++/ { ++ model = "Renesas H3ULCB Kingfisher V1 board based on r8a7795"; ++ ++ aliases { ++ serial1 = &hscif0; ++ serial2 = &hscif1; ++ }; ++ ++ wlan_en: regulator@4 { ++ compatible = "regulator-fixed"; ++ regulator-name = "wlan-en-regulator"; ++ ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_74 4 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ }; ++ ++ codec_en_reg: regulator@6 { ++ compatible = "regulator-fixed"; ++ regulator-name = "codec-en-regulator"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_74 15 0>; ++ ++ /* delay - CHECK */ ++ startup-delay-us = <70000>; ++ enable-active-high; ++ }; ++ ++ amp_en_reg: regulator@7 { ++ compatible = "regulator-fixed"; ++ regulator-name = "amp-en-regulator"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_74 0 0>; ++ ++ startup-delay-us = <0>; ++ enable-active-high; ++ }; ++ ++ /delete-node/regulator@8; ++ ++ sdio_switch: regulator@9 { ++ compatible = "regulator-fixed"; ++ regulator-name = "wifi_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_74 5 0>; ++ enable-active-low; ++ regulator-always-on; ++ }; ++ ++ /delete-node/regulator@10; ++ ++ radio_switch: regulator@11 { ++ compatible = "regulator-fixed"; ++ regulator-name = "radio_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_74 13 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ kim { ++ compatible = "kim"; ++ nshutdown_gpio = <343>; /* gpio_ext_74 pin 3 */ ++ /* serial1 */ ++ dev_name = "/dev/ttySC1"; ++ flow_cntrl = <0>; ++ /* int div 8 hscif@26.6666656MHz */ ++ baud_rate = <3333332>; ++ }; ++}; ++ ++&pfc { ++ /delete-node/hscif4; ++ ++ hscif0_pins: hscif0 { ++ groups = "hscif0_data"; ++ function = "hscif0"; ++ }; ++ ++ hscif1_pins: hscif1 { ++ groups = "hscif1_data_a", "hscif1_ctrl_a"; ++ function = "hscif1"; ++ }; ++}; ++ ++&gpio0 { ++ /delete-node/gpioext_2_20_irq; ++}; ++ ++&gpio1 { ++ /delete-node/gpioext_2_21_irq; ++}; ++ ++&gpio5 { ++ /delete-node/touch_irq; ++ /delete-node/bt_strap; ++ ++ /* V1 has h/w bug with swapped RTS and CTS on BT interface */ ++ /* Ignore these pins */ ++ hscif0_cts { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "hscif0 CTS"; ++ }; ++ ++ hscif0_rts { ++ gpio-hog; ++ gpios = <16 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "hscif0 RTS"; ++ }; ++}; ++ ++&gpio7 { ++ /delete-node/gpioext_2_21_irq; ++}; ++ ++&hscif4 { ++ /delete-property/pinctrl-0; ++ /delete-property/pinctrl-names; ++ ++ status = "disabled"; ++}; ++ ++&i2c2 { ++ /delete-node/pca9535@20; ++ /delete-node/pca9535@21; ++ ++ gpio_ext_74: pca9539@74 { ++ compatible = "nxp,pca9539"; ++ reg = <0x74>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ hub_pwen { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "HUB pwen"; ++ }; ++ hub_rst { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "HUB rst"; ++ }; ++ }; ++ ++ gpio_ext_75: pca9539@75 { ++ compatible = "nxp,pca9539"; ++ reg = <0x75>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ }; ++}; ++ ++&i2cswitch2 { ++ reg = <0x71>; ++ reset-gpios= <&gpio5 3 GPIO_ACTIVE_LOW>; ++}; ++ ++&i2c4 { ++ /delete-node/pca9535@21; ++ ++ gpio_ext_76: pca9539@76 { ++ compatible = "nxp,pca9539"; ++ reg = <0x76>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ }; ++ ++ gpio_ext_77: pca9539@77 { ++ compatible = "nxp,pca9539"; ++ reg = <0x77>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ port_b_a0 { ++ gpio-hog; ++ gpios = <0 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B A0"; ++ }; ++ port_b_a1 { ++ gpio-hog; ++ gpios = <1 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B A1"; ++ }; ++ port_a_a0 { ++ gpio-hog; ++ gpios = <2 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A A0"; ++ }; ++ port_a_a1 { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A A1"; ++ }; ++ lvds_vs_fpdl { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "LVDS switch"; ++ }; ++ }; ++}; ++ ++&i2cswitch4 { ++ reg = <0x71>; ++ reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>; ++}; ++ ++&wlcore { ++ interrupts = <25 IRQ_TYPE_EDGE_FALLING>; ++}; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts new file mode 100644 -index 0000000..50a37e0 +index 0000000..78c708f --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts -@@ -0,0 +1,1679 @@ +@@ -0,0 +1,1565 @@ +/* + * Device Tree Source for the H3ULCB Kingfisher board on r8a7795 + * @@ -222,69 +470,6 @@ index 0000000..50a37e0 + }; + }; + -+ sound_amp: sound@3 { -+ pinctrl-0 = <&sound_9_pins>; -+ pinctrl-names = "default"; -+ compatible = "simple-audio-card"; -+ -+ simple-audio-card,name = "power_amp"; -+ -+ simple-audio-card,dai-link@0 { -+ format = "i2s"; -+ cpu { -+ sound-dai = <&rcar_sound 3>; -+ }; -+ codec { -+ sound-dai = <&max98371_L>; -+ }; -+ }; -+ simple-audio-card,dai-link@1 { -+ format = "i2s"; -+ cpu { -+ sound-dai = <&rcar_sound 3>; -+ }; -+ codec { -+ sound-dai = <&max98371_R>; -+ }; -+ }; -+ simple-audio-card,dai-link@2 { -+ format = "i2s"; -+ cpu { -+ sound-dai = <&rcar_sound 3>; -+ }; -+ codec { -+ sound-dai = <&max98371_RL>; -+ }; -+ }; -+ simple-audio-card,dai-link@3 { -+ format = "i2s"; -+ cpu { -+ sound-dai = <&rcar_sound 3>; -+ }; -+ codec { -+ sound-dai = <&max98371_RR>; -+ }; -+ }; -+ simple-audio-card,dai-link@4 { -+ format = "i2s"; -+ cpu { -+ sound-dai = <&rcar_sound 3>; -+ }; -+ codec { -+ sound-dai = <&max98371_C>; -+ }; -+ }; -+ simple-audio-card,dai-link@5 { -+ format = "i2s"; -+ cpu { -+ sound-dai = <&rcar_sound 3>; -+ }; -+ codec { -+ sound-dai = <&max98371_S>; -+ }; -+ }; -+ }; -+ + lvds-encoder { + compatible = "thine,thc63lvdm83d"; + @@ -367,11 +552,6 @@ index 0000000..50a37e0 + function = "ssi"; + }; + -+ sound_9_pins: sound2 { -+ groups = "ssi9_ctrl_b", "ssi9_data_b"; -+ function = "ssi"; -+ }; -+ + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; @@ -476,7 +656,7 @@ index 0000000..50a37e0 + interrupts = <15 IRQ_TYPE_EDGE_FALLING>; + }; + -+ i2cswitch2@74 { ++ i2cswitch2: pca9548@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; @@ -502,37 +682,6 @@ index 0000000..50a37e0 + #size-cells = <0>; + reg = <2>; + /* Power amp node(s) */ -+ -+ max98371_L: max98371@0x31 { -+ compatible = "maxim,max98371"; -+ reg = <0x31>; -+ #sound-dai-cells = <0>; -+ }; -+ max98371_R: max98371@0x32 { -+ compatible = "maxim,max98371"; -+ reg = <0x32>; -+ #sound-dai-cells = <0>; -+ }; -+ max98371_RL: max98371@0x33 { -+ compatible = "maxim,max98371"; -+ reg = <0x33>; -+ #sound-dai-cells = <0>; -+ }; -+ max98371_RR: max98371@0x34 { -+ compatible = "maxim,max98371"; -+ reg = <0x34>; -+ #sound-dai-cells = <0>; -+ }; -+ max98371_C: max98371@0x35 { -+ compatible = "maxim,max98371"; -+ reg = <0x35>; -+ #sound-dai-cells = <0>; -+ }; -+ max98371_S: max98371@0x36 { -+ compatible = "maxim,max98371"; -+ reg = <0x36>; -+ #sound-dai-cells = <0>; -+ }; + }; + + i2c@3 { @@ -617,7 +766,7 @@ index 0000000..50a37e0 + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + }; + -+ i2cswitch4@74 { ++ i2cswitch4: pca9548@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; @@ -635,7 +784,7 @@ index 0000000..50a37e0 + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; -+ /* Video input "A" acc node(s) */ ++ /* Slot A (CN10) */ + + ov106xx@0 { + compatible = "ovti,ov106xx"; @@ -731,6 +880,7 @@ index 0000000..50a37e0 + ti964-ti9x3@0 { + compatible = "ti,ti964-ti9x3"; + reg = <0x3a>; ++ gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; + ti,sensor_delay = <350>; + ti,links = <4>; + ti,lanes = <4>; @@ -844,7 +994,7 @@ index 0000000..50a37e0 + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; -+ /* Video input "B" acc node(s) */ ++ /* Slot B (CN11) */ + + ov106xx@4 { + compatible = "ovti,ov106xx"; @@ -940,6 +1090,7 @@ index 0000000..50a37e0 + ti964-ti9x3@1 { + compatible = "ti,ti964-ti9x3"; + reg = <0x3a>; ++ gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>; + ti,sensor_delay = <350>; + ti,links = <4>; + ti,lanes = <4>; @@ -1049,32 +1200,11 @@ index 0000000..50a37e0 + }; + }; + -+ i2c@3 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <3>; -+ /* MOST node(s) */ -+ }; -+ -+ i2c@4 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <4>; -+ /* CSI camera node(s) */ -+ }; -+ -+ i2c@5 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <5>; -+ /* CMOS camera node(s) */ -+ }; -+ + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; -+ /* Video input "B" main node(s) */ ++ /* Slot B (CN11) */ + + video_b_ext0: pca9535@27 { + compatible = "nxp,pca9535"; @@ -1180,6 +1310,12 @@ index 0000000..50a37e0 + output-high; + line-name = "Video-B PWR1"; + }; ++ video_b_cam_pwr3 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR3"; ++ }; + }; + }; + @@ -1187,7 +1323,7 @@ index 0000000..50a37e0 + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; -+ /* Video input "A" main node(s) */ ++ /* Slot A (CN10) */ + + video_a_ext0: pca9535@26 { + compatible = "nxp,pca9535"; @@ -1293,6 +1429,12 @@ index 0000000..50a37e0 + output-high; + line-name = "Video-A PWR1"; + }; ++ video_a_cam_pwr3 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR3"; ++ }; + }; + }; + }; @@ -1659,10 +1801,6 @@ index 0000000..50a37e0 + dai2 { + capture = <&ssi6>; + }; -+ -+ dai3 { -+ playback = <&ssi9>; -+ }; + }; +}; + @@ -1691,10 +1829,6 @@ index 0000000..50a37e0 + }; +}; + -+&xhci0 { -+ status = "okay"; -+}; -+ +&usb2_phy0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas_4.9.bbappend b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas_4.9.bbappend index d842fe1..76dabb7 100644 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas_4.9.bbappend +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas_4.9.bbappend @@ -26,6 +26,7 @@ SRC_URI_append = " \ file://0021-btwilink-add-minimal-device-tree-support.patch \ file://0022-ASoC-Modify-check-condition-of-multiple-bindings-of-.patch \ file://0023-ASoC-add-dummy-Si468x-driver.patch \ + file://0024-wl18xx-do-not-invert-IRQ-on-WLxxxx-side.patch \ file://0030-Gen3-LVDS-cameras.patch \ file://0031-arm64-dts-r8a7795-es1-salvator-x-view-add-ADAS-board.patch \ file://0032-arm64-dts-r8a7795-es1-h3ulcb-view-add-ADAS-board.patch \ |