diff options
Diffstat (limited to 'meta-rcar-gen3-adas/recipes-kernel')
7 files changed, 1705 insertions, 1674 deletions
diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0030-Gen3-LVDS-cameras.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0030-Gen3-LVDS-cameras.patch index 67728ff..3c80601 100644 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0030-Gen3-LVDS-cameras.patch +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0030-Gen3-LVDS-cameras.patch @@ -4,41 +4,45 @@ Date: Sun, 14 May 2017 15:20:01 +0300 Subject: [PATCH] Gen3: LVDS cameras This add Gen3 LVDS cameras support: -- deserializers: MAX9286, TI964, TI954, TI960 -- cameras: ov10635, ov490+ov10640, ov495+OV2775, ar0132, ap0101+ar014x +- deserializers: MAX9286, DS90UB954/960/964 +- cameras: ov10635, ov490+ov10640, ov495+OV2775, ar0132, ar0220, + ap0101+ar014x Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> --- - drivers/media/i2c/soc_camera/Kconfig | 47 + - drivers/media/i2c/soc_camera/Makefile | 7 + + drivers/media/i2c/soc_camera/Kconfig | 41 + + drivers/media/i2c/soc_camera/Makefile | 6 + drivers/media/i2c/soc_camera/ap0101_ar014x.c | 588 +++++++++++ drivers/media/i2c/soc_camera/ap0101_ar014x.h | 28 + - drivers/media/i2c/soc_camera/ar0132.c | 582 +++++++++++ + drivers/media/i2c/soc_camera/ar0132.c | 565 +++++++++++ drivers/media/i2c/soc_camera/ar0132.h | 213 ++++ + drivers/media/i2c/soc_camera/ar0220.c | 528 ++++++++++ + drivers/media/i2c/soc_camera/ar0220.h | 309 ++++++ drivers/media/i2c/soc_camera/max9286.c | 697 +++++++++++++ drivers/media/i2c/soc_camera/max9286.h | 244 +++++ drivers/media/i2c/soc_camera/ov10635.c | 759 ++++++++++++++ - drivers/media/i2c/soc_camera/ov10635.h | 1139 +++++++++++++++++++++ + drivers/media/i2c/soc_camera/ov10635.h | 1139 ++++++++++++++++++++++ drivers/media/i2c/soc_camera/ov10635_debug.h | 54 + - drivers/media/i2c/soc_camera/ov106xx.c | 117 +++ - drivers/media/i2c/soc_camera/ov490_ov10640.c | 1160 ++++++++++++++++++++++ + drivers/media/i2c/soc_camera/ov106xx.c | 128 +++ + drivers/media/i2c/soc_camera/ov490_ov10640.c | 1133 +++++++++++++++++++++ drivers/media/i2c/soc_camera/ov490_ov10640.h | 102 ++ - drivers/media/i2c/soc_camera/ov495_ov2775.c | 658 ++++++++++++ + drivers/media/i2c/soc_camera/ov495_ov2775.c | 639 ++++++++++++ drivers/media/i2c/soc_camera/ov495_ov2775.h | 23 + - drivers/media/i2c/soc_camera/ti954_ti9x3.c | 439 ++++++++ - drivers/media/i2c/soc_camera/ti964_ti9x3.c | 408 ++++++++ - drivers/media/i2c/soc_camera/ti9x4_ti9x3.h | 153 +++ + drivers/media/i2c/soc_camera/ti9x4.c | 520 ++++++++++ + drivers/media/i2c/soc_camera/ti9x4.h | 156 +++ drivers/media/platform/soc_camera/rcar_csi2.c | 297 ++++-- - drivers/media/platform/soc_camera/rcar_vin.c | 211 +++- + drivers/media/platform/soc_camera/rcar_vin.c | 194 +++- drivers/media/platform/soc_camera/soc_camera.c | 17 +- drivers/media/platform/soc_camera/soc_mediabus.c | 16 + include/media/drv-intf/soc_mediabus.h | 3 + include/media/soc_camera.h | 1 + - 25 files changed, 7854 insertions(+), 109 deletions(-) + 26 files changed, 8291 insertions(+), 109 deletions(-) create mode 100644 drivers/media/i2c/soc_camera/ap0101_ar014x.c create mode 100644 drivers/media/i2c/soc_camera/ap0101_ar014x.h create mode 100644 drivers/media/i2c/soc_camera/ar0132.c create mode 100644 drivers/media/i2c/soc_camera/ar0132.h + create mode 100644 drivers/media/i2c/soc_camera/ar0220.c + create mode 100644 drivers/media/i2c/soc_camera/ar0220.h create mode 100644 drivers/media/i2c/soc_camera/max9286.c create mode 100644 drivers/media/i2c/soc_camera/max9286.h create mode 100644 drivers/media/i2c/soc_camera/ov10635.c @@ -49,42 +53,47 @@ Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> create mode 100644 drivers/media/i2c/soc_camera/ov490_ov10640.h create mode 100644 drivers/media/i2c/soc_camera/ov495_ov2775.c create mode 100644 drivers/media/i2c/soc_camera/ov495_ov2775.h - create mode 100644 drivers/media/i2c/soc_camera/ti954_ti9x3.c - create mode 100644 drivers/media/i2c/soc_camera/ti964_ti9x3.c - create mode 100644 drivers/media/i2c/soc_camera/ti9x4_ti9x3.h + create mode 100644 drivers/media/i2c/soc_camera/ti9x4.c + create mode 100644 drivers/media/i2c/soc_camera/ti9x4.h diff --git a/drivers/media/i2c/soc_camera/Kconfig b/drivers/media/i2c/soc_camera/Kconfig -index 7704bcf..82da59f 100644 +index 7704bcf..d6377e9 100644 --- a/drivers/media/i2c/soc_camera/Kconfig +++ b/drivers/media/i2c/soc_camera/Kconfig -@@ -6,6 +6,53 @@ config SOC_CAMERA_IMX074 +@@ -6,6 +6,47 @@ config SOC_CAMERA_IMX074 help This driver supports IMX074 cameras from Sony -+config SOC_CAMERA_MAX9286_MAX9271 -+ tristate "max9286-max9271 GMSL support" ++config SOC_CAMERA_MAX9286 ++ tristate "max9286 GMSL support" + depends on SOC_CAMERA && I2C + help -+ This is a MAXIM max9286-max9271 GMSL driver ++ This is a MAXIM max9286 GMSL driver + +config SOC_CAMERA_OV106XX + tristate "ov106xx camera support" -+ depends on SOC_CAMERA && SOC_CAMERA_MAX9286_MAX9271 && I2C ++ depends on SOC_CAMERA && I2C + help + This is a runtime detected OmniVision ov10635 or ov490-ov10640 + or ov495-ov2775 sensors camera driver + ++config SOC_CAMERA_TI9X4 ++ tristate "ti9x4 FPDLinkIII support" ++ depends on SOC_CAMERA && I2C ++ help ++ This is an Texas Instruments ti9X4 FPDLinkIII driver ++ +if !SOC_CAMERA_OV106XX + +config SOC_CAMERA_OV10635 + tristate "ov10635 camera support" -+ depends on SOC_CAMERA && SOC_CAMERA_MAX9286_MAX9271 && I2C ++ depends on SOC_CAMERA && I2C + help + This is an OmniVision ov10635 sensor camera driver + +config SOC_CAMERA_OV490_OV10640 + tristate "ov490-ov10640 camera support" -+ depends on SOC_CAMERA && SOC_CAMERA_MAX9286_MAX9271 && I2C ++ depends on SOC_CAMERA && I2C + help + This is an OmniVision ov490-ov10640 sensor camera driver + @@ -96,30 +105,17 @@ index 7704bcf..82da59f 100644 + +endif + -+config SOC_CAMERA_TI964_TI9X3 -+ tristate "ti964-ti9x3 FPDLinkIII support" -+ depends on SOC_CAMERA && I2C -+ help -+ This is an Texas Instruments ti964-ti9X3 FPDLinkIII driver -+ -+config SOC_CAMERA_TI954_TI9X3 -+ tristate "ti954-ti9X3 FPDLinkIII support" -+ depends on SOC_CAMERA && I2C -+ help -+ This is an Texas Instruments ti954-ti9X3 FPDLinkIII driver -+ config SOC_CAMERA_MT9M001 tristate "mt9m001 support" depends on SOC_CAMERA && I2C diff --git a/drivers/media/i2c/soc_camera/Makefile b/drivers/media/i2c/soc_camera/Makefile -index 6f994f9..e88f6a9 100644 +index 6f994f9..58086d4 100644 --- a/drivers/media/i2c/soc_camera/Makefile +++ b/drivers/media/i2c/soc_camera/Makefile -@@ -1,8 +1,15 @@ +@@ -1,8 +1,14 @@ obj-$(CONFIG_SOC_CAMERA_IMX074) += imx074.o -+obj-$(CONFIG_SOC_CAMERA_MAX9286_MAX9271) += max9286.o -+obj-$(CONFIG_SOC_CAMERA_TI964_TI9X3) += ti964_ti9x3.o -+obj-$(CONFIG_SOC_CAMERA_TI954_TI9X3) += ti954_ti9x3.o ++obj-$(CONFIG_SOC_CAMERA_MAX9286) += max9286.o ++obj-$(CONFIG_SOC_CAMERA_TI9X4) += ti9x4.o obj-$(CONFIG_SOC_CAMERA_MT9M001) += mt9m001.o obj-$(CONFIG_SOC_CAMERA_MT9T031) += mt9t031.o obj-$(CONFIG_SOC_CAMERA_MT9T112) += mt9t112.o @@ -761,10 +757,10 @@ index 0000000..16599a1 +}; diff --git a/drivers/media/i2c/soc_camera/ar0132.c b/drivers/media/i2c/soc_camera/ar0132.c new file mode 100644 -index 0000000..97d9878 +index 0000000..e124e6a --- /dev/null +++ b/drivers/media/i2c/soc_camera/ar0132.c -@@ -0,0 +1,582 @@ +@@ -0,0 +1,565 @@ +/* + * ON Semiconductor AR0132 sensor camera driver + * @@ -811,8 +807,7 @@ index 0000000..97d9878 + /* serializers */ + int max9286_addr; + int max9271_addr; -+ int ti964_addr; -+ int ti954_addr; ++ int ti9x4_addr; + int ti9x3_addr; + int port; + int gpio_resetb; @@ -1160,19 +1155,13 @@ index 0000000..97d9878 + break; + + if (!of_property_read_u32(rendpoint, "ti9x3-addr", &priv->ti9x3_addr) && -+ !of_property_match_string(rendpoint->parent->parent, "compatible", "ti,ti964-ti9x3") && -+ !of_property_read_u32(rendpoint->parent->parent, "reg", &priv->ti964_addr) && -+ !kstrtouint(strrchr(rendpoint->full_name, '@') + 1, 0, &priv->port)) -+ break; -+ -+ if (!of_property_read_u32(rendpoint, "ti9x3-addr", &priv->ti9x3_addr) && -+ !of_property_match_string(rendpoint->parent->parent, "compatible", "ti,ti954-ti9x3") && -+ !of_property_read_u32(rendpoint->parent->parent, "reg", &priv->ti954_addr) && ++ !of_property_match_string(rendpoint->parent->parent, "compatible", "ti,ti9x4") && ++ !of_property_read_u32(rendpoint->parent->parent, "reg", &priv->ti9x4_addr) && + !kstrtouint(strrchr(rendpoint->full_name, '@') + 1, 0, &priv->port)) + break; + } + -+ if (!priv->max9286_addr && !priv->ti964_addr && !priv->ti954_addr) { ++ if (!priv->max9286_addr && !priv->ti9x4_addr) { + dev_err(&client->dev, "deserializer does not present for AR0132\n"); + return -EINVAL; + } @@ -1188,18 +1177,8 @@ index 0000000..97d9878 + reg8_write(client, 0x0A, AR0132_I2C_ADDR << 1); /* Sensor native I2C address */ + usleep_range(2000, 2500); /* wait 2ms */ + }; -+ if (priv->ti964_addr) { -+ client->addr = priv->ti964_addr; /* Deserializer I2C address */ -+ -+ reg8_write(client, 0x4c, (priv->port << 4) | (1 << priv->port)); /* Select RX port number */ -+ usleep_range(2000, 2500); /* wait 2ms */ -+ reg8_write(client, 0x65, tmp_addr << 1); /* Sensor translated I2C address */ -+ reg8_write(client, 0x5d, AR0132_I2C_ADDR << 1); /* Sensor native I2C address */ -+ -+ reg8_write(client, 0x6e, 0xa9); /* GPIO0 - reset, GPIO1 - fsin */ -+ } -+ if (priv->ti954_addr) { -+ client->addr = priv->ti954_addr; /* Deserializer I2C address */ ++ if (priv->ti9x4_addr) { ++ client->addr = priv->ti9x4_addr; /* Deserializer I2C address */ + + reg8_write(client, 0x4c, (priv->port << 4) | (1 << priv->port)); /* Select RX port number */ + usleep_range(2000, 2500); /* wait 2ms */ @@ -1349,12 +1328,12 @@ index 0000000..97d9878 +#endif diff --git a/drivers/media/i2c/soc_camera/ar0132.h b/drivers/media/i2c/soc_camera/ar0132.h new file mode 100644 -index 0000000..bcee0e5 +index 0000000..bafa193 --- /dev/null +++ b/drivers/media/i2c/soc_camera/ar0132.h @@ -0,0 +1,213 @@ +/* -+ * ON Semiconductor ar0132 sensor camera wizard 1110x620@30/BGGR/BT601/12bit ++ * ON Semiconductor AR0132 sensor camera wizard 1110x620@30/BGGR/BT601/12bit + * + * Copyright (C) 2017 Cogent Embedded, Inc. + * @@ -1566,9 +1545,592 @@ index 0000000..bcee0e5 +{0x31D0, 0x0001}, +{0x30B0, 0x2002}, +}; +diff --git a/drivers/media/i2c/soc_camera/ar0220.c b/drivers/media/i2c/soc_camera/ar0220.c +new file mode 100644 +index 0000000..ef2eb51 +--- /dev/null ++++ b/drivers/media/i2c/soc_camera/ar0220.c +@@ -0,0 +1,528 @@ ++/* ++ * ON Semiconductor AR0220 sensor camera driver ++ * ++ * Copyright (C) 2017-2018 Cogent Embedded, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++ ++#include <linux/delay.h> ++#include <linux/init.h> ++#include <linux/i2c.h> ++#include <linux/module.h> ++#include <linux/videodev2.h> ++ ++#include <media/soc_camera.h> ++#include <media/v4l2-common.h> ++#include <media/v4l2-ctrls.h> ++#include <media/v4l2-of.h> ++ ++#include "ar0220.h" ++ ++#define AR0220_I2C_ADDR 0x10 ++//#define AR0220_I2C_ADDR 0x54 // eeprom ++ ++#define AR0220_PID 0x3000 ++#define AR0220_VERSION_REG 0x0C54 ++ ++#define AR0220_MEDIA_BUS_FMT MEDIA_BUS_FMT_SBGGR8_1X8 ++ ++struct ar0220_priv { ++ struct v4l2_subdev sd; ++ struct v4l2_ctrl_handler hdl; ++ struct media_pad pad; ++ struct v4l2_rect rect; ++ int init_complete; ++ u8 id[6]; ++ int exposure; ++ int gain; ++ int autogain; ++ /* serializers */ ++ int ti9x4_addr; ++ int ti9x3_addr; ++ int port; ++ int gpio_resetb; ++ int gpio_fsin; ++ ++}; ++ ++static inline struct ar0220_priv *to_ar0220(const struct i2c_client *client) ++{ ++ return container_of(i2c_get_clientdata(client), struct ar0220_priv, sd); ++} ++ ++static int ar0220_set_regs(struct i2c_client *client, ++ const struct ar0220_reg *regs, int nr_regs) ++{ ++ int i; ++ ++ for (i = 0; i < nr_regs; i++) { ++ if (regs[i].reg == AR0220_DELAY) { ++ mdelay(regs[i].val); ++ continue; ++ } ++ ++ reg16_write16(client, regs[i].reg, regs[i].val); ++ } ++ ++ return 0; ++} ++ ++static int ar0220_s_stream(struct v4l2_subdev *sd, int enable) ++{ ++ return 0; ++} ++ ++static int ar0220_get_fmt(struct v4l2_subdev *sd, ++ struct v4l2_subdev_pad_config *cfg, ++ struct v4l2_subdev_format *format) ++{ ++ struct v4l2_mbus_framefmt *mf = &format->format; ++ struct i2c_client *client = v4l2_get_subdevdata(sd); ++ struct ar0220_priv *priv = to_ar0220(client); ++ ++ if (format->pad) ++ return -EINVAL; ++ ++ mf->width = priv->rect.width; ++ mf->height = priv->rect.height; ++ mf->code = AR0220_MEDIA_BUS_FMT; ++ mf->colorspace = V4L2_COLORSPACE_SMPTE170M; ++ mf->field = V4L2_FIELD_NONE; ++ ++ return 0; ++} ++ ++static int ar0220_set_fmt(struct v4l2_subdev *sd, ++ struct v4l2_subdev_pad_config *cfg, ++ struct v4l2_subdev_format *format) ++{ ++ struct v4l2_mbus_framefmt *mf = &format->format; ++ ++ mf->code = AR0220_MEDIA_BUS_FMT; ++ mf->colorspace = V4L2_COLORSPACE_SMPTE170M; ++ mf->field = V4L2_FIELD_NONE; ++ ++ if (format->which == V4L2_SUBDEV_FORMAT_TRY) ++ cfg->try_fmt = *mf; ++ ++ return 0; ++} ++ ++static int ar0220_enum_mbus_code(struct v4l2_subdev *sd, ++ struct v4l2_subdev_pad_config *cfg, ++ struct v4l2_subdev_mbus_code_enum *code) ++{ ++ if (code->pad || code->index > 0) ++ return -EINVAL; ++ ++ code->code = AR0220_MEDIA_BUS_FMT; ++ ++ return 0; ++} ++ ++static int ar0220_get_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid) ++{ ++ struct i2c_client *client = v4l2_get_subdevdata(sd); ++ struct ar0220_priv *priv = to_ar0220(client); ++ ++ memcpy(edid->edid, priv->id, 6); ++ ++ edid->edid[6] = 0xff; ++ edid->edid[7] = client->addr; ++ edid->edid[8] = AR0220_VERSION_REG >> 8; ++ edid->edid[9] = AR0220_VERSION_REG & 0xff; ++ ++ return 0; ++} ++ ++static int ar0220_set_selection(struct v4l2_subdev *sd, ++ struct v4l2_subdev_pad_config *cfg, ++ struct v4l2_subdev_selection *sel) ++{ ++ struct v4l2_rect *rect = &sel->r; ++ struct i2c_client *client = v4l2_get_subdevdata(sd); ++ struct ar0220_priv *priv = to_ar0220(client); ++ ++ if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE || ++ sel->target != V4L2_SEL_TGT_CROP) ++ return -EINVAL; ++ ++ rect->left = ALIGN(rect->left, 2); ++ rect->top = ALIGN(rect->top, 2); ++ rect->width = ALIGN(rect->width, 2); ++ rect->height = ALIGN(rect->height, 2); ++ ++ if ((rect->left + rect->width > AR0220_MAX_WIDTH) || ++ (rect->top + rect->height > AR0220_MAX_HEIGHT)) ++ *rect = priv->rect; ++ ++ priv->rect.left = rect->left; ++ priv->rect.top = rect->top; ++ priv->rect.width = rect->width; ++ priv->rect.height = rect->height; ++ ++ return 0; ++} ++ ++static int ar0220_get_selection(struct v4l2_subdev *sd, ++ struct v4l2_subdev_pad_config *cfg, ++ struct v4l2_subdev_selection *sel) ++{ ++ struct i2c_client *client = v4l2_get_subdevdata(sd); ++ struct ar0220_priv *priv = to_ar0220(client); ++ ++ if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE) ++ return -EINVAL; ++ ++ switch (sel->target) { ++ case V4L2_SEL_TGT_CROP_BOUNDS: ++ sel->r.left = 0; ++ sel->r.top = 0; ++ sel->r.width = AR0220_MAX_WIDTH; ++ sel->r.height = AR0220_MAX_HEIGHT; ++ return 0; ++ case V4L2_SEL_TGT_CROP_DEFAULT: ++ sel->r.left = 0; ++ sel->r.top = 0; ++ sel->r.width = AR0220_MAX_WIDTH; ++ sel->r.height = AR0220_MAX_HEIGHT; ++ return 0; ++ case V4L2_SEL_TGT_CROP: ++ sel->r = priv->rect; ++ return 0; ++ default: ++ return -EINVAL; ++ } ++} ++ ++static int ar0220_g_mbus_config(struct v4l2_subdev *sd, ++ struct v4l2_mbus_config *cfg) ++{ ++ cfg->flags = V4L2_MBUS_CSI2_1_LANE | V4L2_MBUS_CSI2_CHANNEL_0 | ++ V4L2_MBUS_CSI2_CONTINUOUS_CLOCK; ++ cfg->type = V4L2_MBUS_CSI2; ++ ++ return 0; ++} ++ ++#ifdef CONFIG_VIDEO_ADV_DEBUG ++static int ar0220_g_register(struct v4l2_subdev *sd, ++ struct v4l2_dbg_register *reg) ++{ ++ struct i2c_client *client = v4l2_get_subdevdata(sd); ++ int ret; ++ u16 val = 0; ++ ++ ret = reg16_read16(client, (u16)reg->reg, &val); ++ if (ret < 0) ++ return ret; ++ ++ reg->val = val; ++ reg->size = sizeof(u16); ++ ++ return 0; ++} ++ ++static int ar0220_s_register(struct v4l2_subdev *sd, ++ const struct v4l2_dbg_register *reg) ++{ ++ struct i2c_client *client = v4l2_get_subdevdata(sd); ++ ++ return reg16_write16(client, (u16)reg->reg, (u16)reg->val); ++} ++#endif ++ ++static struct v4l2_subdev_core_ops ar0220_core_ops = { ++#ifdef CONFIG_VIDEO_ADV_DEBUG ++ .g_register = ar0220_g_register, ++ .s_register = ar0220_s_register, ++#endif ++}; ++ ++static int ar0220_s_ctrl(struct v4l2_ctrl *ctrl) ++{ ++ struct v4l2_subdev *sd = to_sd(ctrl); ++ struct i2c_client *client = v4l2_get_subdevdata(sd); ++ struct ar0220_priv *priv = to_ar0220(client); ++ int ret = -EINVAL; ++ ++ if (!priv->init_complete) ++ return 0; ++ ++ switch (ctrl->id) { ++ case V4L2_CID_BRIGHTNESS: ++ case V4L2_CID_CONTRAST: ++ case V4L2_CID_SATURATION: ++ case V4L2_CID_HUE: ++ case V4L2_CID_GAMMA: ++ case V4L2_CID_SHARPNESS: ++ case V4L2_CID_AUTOGAIN: ++ case V4L2_CID_GAIN: ++ case V4L2_CID_EXPOSURE: ++ case V4L2_CID_HFLIP: ++ case V4L2_CID_VFLIP: ++ break; ++ } ++ ++ return ret; ++} ++ ++static const struct v4l2_ctrl_ops ar0220_ctrl_ops = { ++ .s_ctrl = ar0220_s_ctrl, ++}; ++ ++static struct v4l2_subdev_video_ops ar0220_video_ops = { ++ .s_stream = ar0220_s_stream, ++ .g_mbus_config = ar0220_g_mbus_config, ++}; ++ ++static const struct v4l2_subdev_pad_ops ar0220_subdev_pad_ops = { ++ .get_edid = ar0220_get_edid, ++ .enum_mbus_code = ar0220_enum_mbus_code, ++ .get_selection = ar0220_get_selection, ++ .set_selection = ar0220_set_selection, ++ .get_fmt = ar0220_get_fmt, ++ .set_fmt = ar0220_set_fmt, ++}; ++ ++static struct v4l2_subdev_ops ar0220_subdev_ops = { ++ .core = &ar0220_core_ops, ++ .video = &ar0220_video_ops, ++ .pad = &ar0220_subdev_pad_ops, ++}; ++ ++static void ar0220_otp_id_read(struct i2c_client *client) ++{ ++} ++ ++static ssize_t ar0220_otp_id_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct v4l2_subdev *sd = i2c_get_clientdata(to_i2c_client(dev)); ++ struct i2c_client *client = v4l2_get_subdevdata(sd); ++ struct ar0220_priv *priv = to_ar0220(client); ++ ++ return snprintf(buf, 32, "%02x:%02x:%02x:%02x:%02x:%02x\n", ++ priv->id[0], priv->id[1], priv->id[2], priv->id[3], priv->id[4], priv->id[5]); ++} ++ ++static DEVICE_ATTR(otp_id_ar0220, S_IRUGO, ar0220_otp_id_show, NULL); ++ ++static int ar0220_initialize(struct i2c_client *client) ++{ ++ struct ar0220_priv *priv = to_ar0220(client); ++ u16 val = 0; ++ u16 pid = 0; ++ int ret = 0; ++ ++ /* check and show model ID */ ++ reg16_read16(client, AR0220_PID, &pid); ++ ++ if (pid != AR0220_VERSION_REG) { ++ dev_dbg(&client->dev, "Product ID error %x\n", pid); ++ ret = -ENODEV; ++ goto err; ++ } ++ ++ /* Program wizard registers */ ++ ar0220_set_regs(client, ar0220_regs_wizard, ARRAY_SIZE(ar0220_regs_wizard)); ++ ++ /* Enable stream */ ++ reg16_read16(client, 0x301a, &val); // read inital reset_register value ++ val |= (1 << 2); // Set streamOn bit ++ reg16_write16(client, 0x301a, val); // Start Streaming ++ ++ /* Read OTP IDs */ ++ ar0220_otp_id_read(client); ++ ++ dev_info(&client->dev, "ar0220 PID %x, res %dx%d, OTP_ID %02x:%02x:%02x:%02x:%02x:%02x\n", ++ pid, AR0220_MAX_WIDTH, AR0220_MAX_HEIGHT, priv->id[0], priv->id[1], priv->id[2], priv->id[3], priv->id[4], priv->id[5]); ++err: ++ return ret; ++} ++ ++static int ar0220_parse_dt(struct device_node *np, struct ar0220_priv *priv) ++{ ++ struct i2c_client *client = v4l2_get_subdevdata(&priv->sd); ++ int i; ++ struct device_node *endpoint = NULL, *rendpoint = NULL; ++ int tmp_addr = 0; ++ ++ for (i = 0; ; i++) { ++ endpoint = of_graph_get_next_endpoint(np, endpoint); ++ if (!endpoint) ++ break; ++ ++ of_node_put(endpoint); ++ ++ rendpoint = of_parse_phandle(endpoint, "remote-endpoint", 0); ++ if (!rendpoint) ++ continue; ++ ++ if (!of_property_read_u32(rendpoint, "ti9x3-addr", &priv->ti9x3_addr) && ++ !of_property_match_string(rendpoint->parent->parent, "compatible", "ti,ti9x4") && ++ !of_property_read_u32(rendpoint->parent->parent, "reg", &priv->ti9x4_addr) && ++ !kstrtouint(strrchr(rendpoint->full_name, '@') + 1, 0, &priv->port)) ++ break; ++ } ++ ++ if (!priv->ti9x4_addr) { ++ dev_err(&client->dev, "deserializer does not present\n"); ++ return -EINVAL; ++ } ++ ++ /* setup I2C translator address */ ++ tmp_addr = client->addr; ++ if (priv->ti9x4_addr) { ++ client->addr = priv->ti9x4_addr; /* Deserializer I2C address */ ++ ++ reg8_write(client, 0x4c, (priv->port << 4) | (1 << priv->port)); /* Select RX port number */ ++ usleep_range(2000, 2500); /* wait 2ms */ ++ reg8_write(client, 0x65, tmp_addr << 1); /* Sensor translated I2C address */ ++ reg8_write(client, 0x5d, AR0220_I2C_ADDR << 1); /* Sensor native I2C address */ ++ ++// reg8_write(client, 0x6e, 0xa9); /* GPIO0 - reset, GPIO1 - fsin */ ++ } ++ client->addr = tmp_addr; ++ ++ mdelay(10); ++ ++ return 0; ++} ++ ++static int ar0220_probe(struct i2c_client *client, ++ const struct i2c_device_id *did) ++{ ++ struct ar0220_priv *priv; ++ int ret; ++ ++ priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL); ++ if (!priv) ++ return -ENOMEM; ++ ++ v4l2_i2c_subdev_init(&priv->sd, client, &ar0220_subdev_ops); ++ priv->sd.flags = V4L2_SUBDEV_FL_HAS_DEVNODE; ++ ++ priv->exposure = 0x100; ++ priv->gain = 0x100; ++ priv->autogain = 1; ++ v4l2_ctrl_handler_init(&priv->hdl, 4); ++ v4l2_ctrl_new_std(&priv->hdl, &ar0220_ctrl_ops, ++ V4L2_CID_BRIGHTNESS, 0, 16, 1, 7); ++ v4l2_ctrl_new_std(&priv->hdl, &ar0220_ctrl_ops, ++ V4L2_CID_CONTRAST, 0, 16, 1, 7); ++ v4l2_ctrl_new_std(&priv->hdl, &ar0220_ctrl_ops, ++ V4L2_CID_SATURATION, 0, 7, 1, 2); ++ v4l2_ctrl_new_std(&priv->hdl, &ar0220_ctrl_ops, ++ V4L2_CID_HUE, 0, 23, 1, 12); ++ v4l2_ctrl_new_std(&priv->hdl, &ar0220_ctrl_ops, ++ V4L2_CID_GAMMA, -128, 128, 1, 0); ++ v4l2_ctrl_new_std(&priv->hdl, &ar0220_ctrl_ops, ++ V4L2_CID_SHARPNESS, 0, 10, 1, 3); ++ v4l2_ctrl_new_std(&priv->hdl, &ar0220_ctrl_ops, ++ V4L2_CID_AUTOGAIN, 0, 1, 1, priv->autogain); ++ v4l2_ctrl_new_std(&priv->hdl, &ar0220_ctrl_ops, ++ V4L2_CID_GAIN, 0, 0xffff, 1, priv->gain); ++ v4l2_ctrl_new_std(&priv->hdl, &ar0220_ctrl_ops, ++ V4L2_CID_EXPOSURE, 0, 0xffff, 1, priv->exposure); ++ v4l2_ctrl_new_std(&priv->hdl, &ar0220_ctrl_ops, ++ V4L2_CID_HFLIP, 0, 1, 1, 1); ++ v4l2_ctrl_new_std(&priv->hdl, &ar0220_ctrl_ops, ++ V4L2_CID_VFLIP, 0, 1, 1, 0); ++ priv->sd.ctrl_handler = &priv->hdl; ++ ++ ret = priv->hdl.error; ++ if (ret) ++ goto cleanup; ++ ++ v4l2_ctrl_handler_setup(&priv->hdl); ++ ++ priv->pad.flags = MEDIA_PAD_FL_SOURCE; ++ priv->sd.entity.flags |= MEDIA_ENT_F_CAM_SENSOR; ++ ret = media_entity_pads_init(&priv->sd.entity, 1, &priv->pad); ++ if (ret < 0) ++ goto cleanup; ++ ++ ret = ar0220_parse_dt(client->dev.of_node, priv); ++ if (ret) ++ goto cleanup; ++ ++ ret = ar0220_initialize(client); ++ if (ret < 0) ++ goto cleanup; ++ ++ priv->rect.left = 0; ++ priv->rect.top = 0; ++ priv->rect.width = AR0220_MAX_WIDTH; ++ priv->rect.height = AR0220_MAX_HEIGHT; ++ ++ ret = v4l2_async_register_subdev(&priv->sd); ++ if (ret) ++ goto cleanup; ++ ++ if (device_create_file(&client->dev, &dev_attr_otp_id_ar0220) != 0) { ++ dev_err(&client->dev, "sysfs otp_id entry creation failed\n"); ++ goto cleanup; ++ } ++ ++ priv->init_complete = 1; ++ ++ return 0; ++ ++cleanup: ++ media_entity_cleanup(&priv->sd.entity); ++ v4l2_ctrl_handler_free(&priv->hdl); ++ v4l2_device_unregister_subdev(&priv->sd); ++#ifdef CONFIG_SOC_CAMERA_AR0220 ++ v4l_err(client, "failed to probe @ 0x%02x (%s)\n", ++ client->addr, client->adapter->name); ++#endif ++ return ret; ++} ++ ++static int ar0220_remove(struct i2c_client *client) ++{ ++ struct ar0220_priv *priv = i2c_get_clientdata(client); ++ ++ device_remove_file(&client->dev, &dev_attr_otp_id_ar0220); ++ v4l2_async_unregister_subdev(&priv->sd); ++ media_entity_cleanup(&priv->sd.entity); ++ v4l2_ctrl_handler_free(&priv->hdl); ++ v4l2_device_unregister_subdev(&priv->sd); ++ ++ return 0; ++} ++ ++#ifdef CONFIG_SOC_CAMERA_AR0220 ++static const struct i2c_device_id ar0220_id[] = { ++ { "ar0220", 0 }, ++ { } ++}; ++MODULE_DEVICE_TABLE(i2c, ar0220_id); ++ ++static const struct of_device_id ar0220_of_ids[] = { ++ { .compatible = "aptina,ar0220", }, ++ { } ++}; ++MODULE_DEVICE_TABLE(of, ar0220_of_ids); ++ ++static struct i2c_driver ar0220_i2c_driver = { ++ .driver = { ++ .name = "ar0220", ++ .of_match_table = ar0220_of_ids, ++ }, ++ .probe = ar0220_probe, ++ .remove = ar0220_remove, ++ .id_table = ar0220_id, ++}; ++ ++module_i2c_driver(ar0220_i2c_driver); ++ ++MODULE_DESCRIPTION("SoC Camera driver for AR0220"); ++MODULE_AUTHOR("Vladimir Barinov"); ++MODULE_LICENSE("GPL"); ++#endif +diff --git a/drivers/media/i2c/soc_camera/ar0220.h b/drivers/media/i2c/soc_camera/ar0220.h +new file mode 100644 +index 0000000..29987a6 +--- /dev/null ++++ b/drivers/media/i2c/soc_camera/ar0220.h +@@ -0,0 +1,43 @@ ++/* ++ * ON Semiconductor AR0220 sensor camera wizard 1820x940@44/RCCB/BT656 ++ * ++ * Copyright (C) 2017 Cogent Embedded, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ */ ++ ++//#define AR0220_DISPLAY_PATTERN_FIXED ++//#define AR0220_DISPLAY_PATTERN_COLOR_BAR ++ ++#define AR0220_MAX_WIDTH 3648 // (1820*2=3640) <- must be multiple of 16 - requred by R-CAR VIN ++#define AR0220_MAX_HEIGHT 944 ++ ++#define AR0220_DELAY 0xffff ++ ++struct ar0220_reg { ++ u16 reg; ++ u16 val; ++}; ++ ++static const struct ar0220_reg ar0220_regs_wizard[] = { ++{0x301A, 0x0018}, // RESET_REGISTER ++{AR0220_DELAY, 500}, // Wait 500ms ++{0x3070, 0x0000}, // 1: Solid color test pattern, ++ // 2: Full color bar test pattern, ++ // 3: Fade to grey color bar test pattern, ++ //256: Walking 1 test pattern (12 bit) ++{0x3072, 0x0123}, // R ++{0x3074, 0x0456}, // G(GR row) ++{0x3076, 0x0abc}, // B ++{0x3078, 0x0def}, // G(GB row) ++#ifdef AR0220_DISPLAY_PATTERN_FIXED ++{0x3070, 0x0001}, ++#endif ++#ifdef AR0220_DISPLAY_PATTERN_COLOR_BAR ++{0x3070, 0x0002}, ++#endif ++{AR0220_DELAY, 100}, // Wait 100ms ++}; diff --git a/drivers/media/i2c/soc_camera/max9286.c b/drivers/media/i2c/soc_camera/max9286.c new file mode 100644 -index 0000000..989c782 +index 0000000..4dd80f5 --- /dev/null +++ b/drivers/media/i2c/soc_camera/max9286.c @@ -0,0 +1,697 @@ @@ -1642,35 +2204,35 @@ index 0000000..989c782 + +static int poc_trig; +module_param(poc_trig, int, 0644); -+MODULE_PARM_DESC(poc_trig, " Use PoC triggering during reverse channel setup. Useful on systems with dedicated PoC and unstable ser-des lock */"); ++MODULE_PARM_DESC(poc_trig, " Use PoC triggering during reverse channel setup. Useful on systems with dedicated PoC and unstable ser-des lock"); + +static int him; +module_param(him, int, 0644); -+MODULE_PARM_DESC(him, " Use High-Immunity mode (default: leagacy mode) */"); ++MODULE_PARM_DESC(him, " Use High-Immunity mode (default: leagacy mode)"); + +static int fsync_period; +module_param(fsync_period, int, 0644); -+MODULE_PARM_DESC(fsync_period, " Frame sync period (default: 3.2MHz) */"); ++MODULE_PARM_DESC(fsync_period, " Frame sync period (default: 3.2MHz)"); + +static int hsync; +module_param(hsync, int, 0644); -+MODULE_PARM_DESC(hsync, " HSYNC invertion (default: 0 - not inverted) */"); ++MODULE_PARM_DESC(hsync, " HSYNC invertion (default: 0 - not inverted)"); + +static int vsync = 1; +module_param(vsync, int, 0644); -+MODULE_PARM_DESC(vsync, " VSYNC invertion (default: 1 - inverted) */"); ++MODULE_PARM_DESC(vsync, " VSYNC invertion (default: 1 - inverted)"); + +static int gpio_resetb; +module_param(gpio_resetb, int, 0644); -+MODULE_PARM_DESC(gpio_resetb, " Serializer GPIO reset (default: 0 - not used) */"); ++MODULE_PARM_DESC(gpio_resetb, " Serializer GPIO reset (default: 0 - not used)"); + +static int active_low_resetb; +module_param(active_low_resetb, int, 0644); -+MODULE_PARM_DESC(active_low_resetb, " Serializer GPIO reset level (default: 0 - active high) */"); ++MODULE_PARM_DESC(active_low_resetb, " Serializer GPIO reset level (default: 0 - active high)"); + +static int poc_delay; +module_param(poc_delay, int, 0644); -+MODULE_PARM_DESC(poc_delay, " Delay in ms after POC enable (default: 0 ms) */"); ++MODULE_PARM_DESC(poc_delay, " Delay in ms after POC enable (default: 0 ms)"); + +static char* ser_name(int id) +{ @@ -4491,10 +5053,10 @@ index 0000000..4c3515a +#endif diff --git a/drivers/media/i2c/soc_camera/ov106xx.c b/drivers/media/i2c/soc_camera/ov106xx.c new file mode 100644 -index 0000000..4c797f9 +index 0000000..1dca809 --- /dev/null +++ b/drivers/media/i2c/soc_camera/ov106xx.c -@@ -0,0 +1,117 @@ +@@ -0,0 +1,128 @@ +/* + * OmniVision ov10635/ov490-ov10640/ov495-ov2775 sensor camera driver + * @@ -4510,6 +5072,7 @@ index 0000000..4c797f9 +#include "ov490_ov10640.c" +#include "ov495_ov2775.c" +#include "ar0132.c" ++#include "ar0220.c" +#include "ap0101_ar014x.c" + +static enum { @@ -4517,6 +5080,7 @@ index 0000000..4c797f9 + ID_OV490_OV10640, + ID_OV495_OV2775, + ID_AR0132, ++ ID_AR0220, + ID_AP0101_AR014X, +} chip_id; + @@ -4550,6 +5114,12 @@ index 0000000..4c797f9 + goto out; + } + ++ ret = ar0220_probe(client, did); ++ if (!ret) { ++ chip_id = ID_AR0220; ++ goto out; ++ } ++ + ret = ap0101_probe(client, did); + if (!ret) { + chip_id = ID_AP0101_AR014X; @@ -4577,6 +5147,9 @@ index 0000000..4c797f9 + case ID_AR0132: + ar0132_remove(client); + break; ++ case ID_AR0220: ++ ar0220_remove(client); ++ break; + case ID_AP0101_AR014X: + ap0101_remove(client); + break; @@ -4609,19 +5182,19 @@ index 0000000..4c797f9 + +module_i2c_driver(ov106xx_i2c_driver); + -+MODULE_DESCRIPTION("SoC Camera driver for OV10635 or OV490/OV10640 or OV495/OV2775 or AR0132 or AP0101/AR014X"); ++MODULE_DESCRIPTION("SoC Camera driver for OV10635, OV490/OV10640, OV495/OV2775, AR0132, AR0220, AP0101/AR014X"); +MODULE_AUTHOR("Vladimir Barinov"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/i2c/soc_camera/ov490_ov10640.c b/drivers/media/i2c/soc_camera/ov490_ov10640.c new file mode 100644 -index 0000000..f1e34a3 +index 0000000..812f367 --- /dev/null +++ b/drivers/media/i2c/soc_camera/ov490_ov10640.c -@@ -0,0 +1,1160 @@ +@@ -0,0 +1,1133 @@ +/* + * OmniVision ov490-ov10640 sensor camera driver + * -+ * Copyright (C) 2016-2017 Cogent Embedded, Inc. ++ * Copyright (C) 2016-2018 Cogent Embedded, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the @@ -4677,8 +5250,7 @@ index 0000000..f1e34a3 + /* serializers */ + int max9286_addr; + int max9271_addr; -+ int ti964_addr; -+ int ti954_addr; ++ int ti9x4_addr; + int ti9x3_addr; + int port; + int gpio_resetb; @@ -4742,18 +5314,8 @@ index 0000000..f1e34a3 + client->addr = tmp_addr; + } + -+ if (priv->ti964_addr) { -+ client->addr = priv->ti964_addr; /* TI964 I2C address */ -+ -+ reg8_write(client, 0x4c, (priv->port << 4) | (1 << priv->port)); /* Select RX port number */ -+ usleep_range(2000, 2500); /* wait 2ms */ -+ reg8_write(client, 0x6e, 0x8a); /* set GPIO1 value to reset */ -+ usleep_range(2000, 2500); /* wait 2ms */ -+ reg8_write(client, 0x6e, 0x9a); /* set GPIO1 value to un-reset */ -+ } -+ -+ if (priv->ti954_addr) { -+ client->addr = priv->ti954_addr; /* TI964 I2C address */ ++ if (priv->ti9x4_addr) { ++ client->addr = priv->ti9x4_addr; /* TI9x4 I2C address */ + + reg8_write(client, 0x4c, (priv->port << 4) | (1 << priv->port)); /* Select RX port number */ + usleep_range(2000, 2500); /* wait 2ms */ @@ -5557,19 +6119,13 @@ index 0000000..f1e34a3 + } + + if (!of_property_read_u32(rendpoint, "ti9x3-addr", &priv->ti9x3_addr) && -+ !of_property_match_string(rendpoint->parent->parent, "compatible", "ti,ti964-ti9x3") && -+ !of_property_read_u32(rendpoint->parent->parent, "reg", &priv->ti964_addr) && -+ !kstrtouint(strrchr(rendpoint->full_name, '@') + 1, 0, &priv->port)) -+ break; -+ -+ if (!of_property_read_u32(rendpoint, "ti9x3-addr", &priv->ti9x3_addr) && -+ !of_property_match_string(rendpoint->parent->parent, "compatible", "ti,ti954-ti9x3") && -+ !of_property_read_u32(rendpoint->parent->parent, "reg", &priv->ti954_addr) && ++ !of_property_match_string(rendpoint->parent->parent, "compatible", "ti,ti9x4") && ++ !of_property_read_u32(rendpoint->parent->parent, "reg", &priv->ti9x4_addr) && + !kstrtouint(strrchr(rendpoint->full_name, '@') + 1, 0, &priv->port)) + break; + } + -+ if (!priv->max9286_addr && !priv->ti964_addr && !priv->ti954_addr) { ++ if (!priv->max9286_addr && !priv->ti9x4_addr) { + dev_err(&client->dev, "deserializer does not present for OV490\n"); + return -EINVAL; + } @@ -5585,18 +6141,8 @@ index 0000000..f1e34a3 + reg8_write(client, 0x0A, OV490_I2C_ADDR << 1); /* Sensor native I2C address */ + usleep_range(2000, 2500); /* wait 2ms */ + }; -+ if (priv->ti964_addr) { -+ client->addr = priv->ti964_addr; /* Deserializer I2C address */ -+ -+ reg8_write(client, 0x4c, (priv->port << 4) | (1 << priv->port)); /* Select RX port number */ -+ usleep_range(2000, 2500); /* wait 2ms */ -+ reg8_write(client, 0x65, tmp_addr << 1); /* Sensor translated I2C address */ -+ reg8_write(client, 0x5d, OV490_I2C_ADDR << 1); /* Sensor native I2C address */ -+ -+ reg8_write(client, 0x6e, 0x9a); /* GPIO0 - fsin, GPIO1 - resetb */ -+ } -+ if (priv->ti954_addr) { -+ client->addr = priv->ti954_addr; /* Deserializer I2C address */ ++ if (priv->ti9x4_addr) { ++ client->addr = priv->ti9x4_addr; /* Deserializer I2C address */ + + reg8_write(client, 0x4c, (priv->port << 4) | (1 << priv->port)); /* Select RX port number */ + usleep_range(2000, 2500); /* wait 2ms */ @@ -5888,10 +6434,10 @@ index 0000000..b22e93e +}; diff --git a/drivers/media/i2c/soc_camera/ov495_ov2775.c b/drivers/media/i2c/soc_camera/ov495_ov2775.c new file mode 100644 -index 0000000..6dc0675 +index 0000000..e53c482 --- /dev/null +++ b/drivers/media/i2c/soc_camera/ov495_ov2775.c -@@ -0,0 +1,658 @@ +@@ -0,0 +1,639 @@ +/* + * OmniVision ov495-ov2775 sensor camera driver + * @@ -5943,8 +6489,7 @@ index 0000000..6dc0675 + /* serializers */ + int max9286_addr; + int max9271_addr; -+ int ti960_addr; -+ int ti954_addr; ++ int ti9x4_addr; + int ti9x3_addr; + int port; + int gpio_resetb; @@ -6365,39 +6910,21 @@ index 0000000..6dc0675 + continue; + + if (!of_property_read_u32(rendpoint, "ti9x3-addr", &priv->ti9x3_addr) && -+ !of_property_match_string(rendpoint->parent->parent, "compatible", "ti,ti964-ti9x3") && -+ !of_property_read_u32(rendpoint->parent->parent, "reg", &priv->ti960_addr) && -+ !kstrtouint(strrchr(rendpoint->full_name, '@') + 1, 0, &priv->port)) -+ break; -+ -+ if (!of_property_read_u32(rendpoint, "ti9x3-addr", &priv->ti9x3_addr) && -+ !of_property_match_string(rendpoint->parent->parent, "compatible", "ti,ti954-ti9x3") && -+ !of_property_read_u32(rendpoint->parent->parent, "reg", &priv->ti954_addr) && ++ !of_property_match_string(rendpoint->parent->parent, "compatible", "ti,ti9x4") && ++ !of_property_read_u32(rendpoint->parent->parent, "reg", &priv->ti9x4_addr) && + !kstrtouint(strrchr(rendpoint->full_name, '@') + 1, 0, &priv->port)) + break; + } + -+ if (!priv->ti960_addr && !priv->ti954_addr) { ++ if (!priv->ti9x4_addr) { + dev_err(&client->dev, "deserializer does not present for OV495\n"); + return -EINVAL; + } + + /* setup I2C translator address */ + tmp_addr = client->addr; -+ if (priv->ti960_addr) { -+ client->addr = priv->ti960_addr; /* Deserializer I2C address */ -+ -+ reg8_write(client, 0x4c, (priv->port << 4) | (1 << priv->port)); /* Select RX port number */ -+ usleep_range(2000, 2500); /* wait 2ms */ -+ reg8_write(client, 0x65, tmp_addr << 1); /* Sensor translated I2C address */ -+ reg8_write(client, 0x5d, OV495_I2C_ADDR << 1); /* Sensor native I2C address */ -+ -+ reg8_write(client, 0x6e, 0x9a); /* GPIO0 - fsin, GPIO1 - resetb */ -+ /* TODO: why too long? move logic to workqueue? */ -+ mdelay(350); /* time needed to boot all sensor IPs */ -+ } -+ if (priv->ti954_addr) { -+ client->addr = priv->ti954_addr; /* Deserializer I2C address */ ++ if (priv->ti9x4_addr) { ++ client->addr = priv->ti9x4_addr; /* Deserializer I2C address */ + + reg8_write(client, 0x4c, (priv->port << 4) | (1 << priv->port)); /* Select RX port number */ + usleep_range(2000, 2500); /* wait 2ms */ @@ -6579,16 +7106,16 @@ index 0000000..3f53689 +{0x8017, 0x1e | (0 << 6)}, +{0x7c10, 0x01}, /* UYVY */ +}; -diff --git a/drivers/media/i2c/soc_camera/ti954_ti9x3.c b/drivers/media/i2c/soc_camera/ti954_ti9x3.c +diff --git a/drivers/media/i2c/soc_camera/ti9x4.c b/drivers/media/i2c/soc_camera/ti9x4.c new file mode 100644 -index 0000000..ff84128 +index 0000000..aac892b --- /dev/null -+++ b/drivers/media/i2c/soc_camera/ti954_ti9x3.c -@@ -0,0 +1,439 @@ ++++ b/drivers/media/i2c/soc_camera/ti9x4.c +@@ -0,0 +1,520 @@ +/* -+ * TI ti954-(ti913/ti953) FPDLinkIII driver ++ * TI DS90UB954/960/964 FPDLinkIII driver + * -+ * Copyright (C) 2017 Cogent Embedded, Inc. ++ * Copyright (C) 2017-2018 Cogent Embedded, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the @@ -6609,9 +7136,9 @@ index 0000000..ff84128 +#include <media/v4l2-of.h> +#include <media/v4l2-subdev.h> + -+#include "ti9x4_ti9x3.h" ++#include "ti9x4.h" + -+struct ti954_ti9x3_priv { ++struct ti9x4_priv { + struct v4l2_subdev sd[4]; + struct device_node *sd_of_node[4]; + int des_addr; @@ -6619,16 +7146,44 @@ index 0000000..ff84128 + int lanes; + int csi_rate; + const char *forwarding_mode; -+ const char *cable_mode; ++ int is_coax; ++ int dvp_bus; ++ int hsync; ++ int vsync; + int poc_delay; + atomic_t use_count; + struct i2c_client *client; + int ti9x3_addr_map[4]; + char chip_id[6]; ++ int ser_id; + struct regulator *poc_supply[4]; /* PoC power supply */ -+ int xtal_gpio; +}; + ++static int ser_id; ++module_param(ser_id, int, 0644); ++MODULE_PARM_DESC(ser_id, " Serializer ID (default: TI913)"); ++ ++static int is_stp; ++module_param(is_stp, int, 0644); ++MODULE_PARM_DESC(is_stp, " STP cable (default: Coax cable)"); ++ ++static int dvp_bus = 8; ++module_param(dvp_bus, int, 0644); ++MODULE_PARM_DESC(dvp_bus, " DVP/CSI over FPDLink (default: DVP 8-bit)"); ++ ++static int hsync; ++module_param(hsync, int, 0644); ++MODULE_PARM_DESC(hsync, " HSYNC invertion (default: 0 - not inverted)"); ++ ++static int vsync = 1; ++module_param(vsync, int, 0644); ++MODULE_PARM_DESC(vsync, " VSYNC invertion (default: 1 - inverted)"); ++ ++static int poc_delay; ++module_param(poc_delay, int, 0644); ++MODULE_PARM_DESC(poc_delay, " Delay in ms after POC enable (default: 0 ms)"); ++ ++#ifdef TI954_SILICON_ERRATA +static int indirect_write(struct i2c_client *client, unsigned int page, u8 reg, u8 val) +{ + if (page > 7) @@ -6641,7 +7196,6 @@ index 0000000..ff84128 + return 0; +} + -+#if 0 +static int indirect_read(struct i2c_client *client, unsigned int page, u8 reg, u8 *val) +{ + if (page > 7) @@ -6655,13 +7209,9 @@ index 0000000..ff84128 +} +#endif + -+static int poc_delay; -+module_param(poc_delay, int, 0644); -+MODULE_PARM_DESC(poc_delay, " Delay in ms after POC enable (default: 0 ms) */"); -+ -+static void ti954_ti9x3_read_chipid(struct i2c_client *client) ++static void ti9x4_read_chipid(struct i2c_client *client) +{ -+ struct ti954_ti9x3_priv *priv = i2c_get_clientdata(client); ++ struct ti9x4_priv *priv = i2c_get_clientdata(client); + + /* Chip ID */ + reg8_read(client, 0xf1, &priv->chip_id[0]); @@ -6672,12 +7222,12 @@ index 0000000..ff84128 + priv->chip_id[5] = '\0'; +} + -+static void ti954_ti9x3_initial_setup(struct i2c_client *client) ++static void ti9x4_initial_setup(struct i2c_client *client) +{ -+ struct ti954_ti9x3_priv *priv = i2c_get_clientdata(client); ++ struct ti9x4_priv *priv = i2c_get_clientdata(client); + + /* Initial setup */ -+ client->addr = priv->des_addr; /* TI954 I2C */ ++ client->addr = priv->des_addr; /* TI9x4 I2C */ + reg8_write(client, 0x08, 0x1c); /* I2C glitch filter depth */ + reg8_write(client, 0x0a, 0x79); /* I2C high pulse width */ + reg8_write(client, 0x0b, 0x79); /* I2C low pulse width */ @@ -6688,7 +7238,8 @@ index 0000000..ff84128 + reg8_write(client, 0x1f, 0x00); /* CSI rate 1.5/1.6Gbps */ + break; + case 800: /* REFCLK = 25MHZ */ -+ reg8_write(client, 0x1f, 0x02); /* CSI rate 800Mbps */ ++ case 700: /* REFCLK = 22.5MHZ */ ++ reg8_write(client, 0x1f, 0x02); /* CSI rate 700/800Mbps */ + break; + case 400: /* REFCLK = 25MHZ */ + reg8_write(client, 0x1f, 0x03); /* CSI rate 400Mbps */ @@ -6722,7 +7273,7 @@ index 0000000..ff84128 + reg8_write(client, 0x19, 2 >> 8); /* FrameSync high time MSB */ + reg8_write(client, 0x1a, 2 & 0xff); /* FrameSync high time LSB */ + reg8_write(client, 0x1b, FS_TIME >> 8); /* FrameSync low time MSB */ -+ reg8_write(client, 0x1c, FS_TIME & 0xff); /* FrameSync low time LSB */ ++ reg8_write(client, 0x1c, FS_TIME & 0xff); /* FrameSync low time LSB */ + reg8_write(client, 0x18, 0x01); /* Enable FrameSync, HI/LO mode, Frame clock from port0 */ +#endif +} @@ -6730,456 +7281,73 @@ index 0000000..ff84128 +//#define SENSOR_ID 0x30 // ov10635 +//#define SENSOR_ID 0x24 // ov490 + -+static void ti954_ti9x3_fpdlink3_setup(struct i2c_client *client, int idx) ++static void ti9x4_fpdlink3_setup(struct i2c_client *client, int idx) +{ -+ struct ti954_ti9x3_priv *priv = i2c_get_clientdata(client); ++ struct ti9x4_priv *priv = i2c_get_clientdata(client); ++ u8 port_config = 0x78; ++ u8 port_config2 = 0; + + /* FPDLinkIII setup */ -+ client->addr = priv->des_addr; /* TI954 I2C */ ++ client->addr = priv->des_addr; /* TI9x4 I2C */ + reg8_write(client, 0x4c, (idx << 4) | (1 << idx)); /* Select RX port number */ + usleep_range(2000, 2500); /* wait 2ms */ -+ reg8_write(client, 0x58, 0x58); /* Back channel: pass-through/backchannel/CRC enable, Freq=2.5Mbps */ -+ reg8_write(client, 0x5c, priv->ti9x3_addr_map[idx] << 1); /* TI9X3 I2C addr */ -+// reg8_write(client, 0x5d, SENSOR_ID << 1); /* SENSOR I2C native - must be set by sensor driver */ -+// reg8_write(client, 0x65, (0x60 + idx) << 1); /* SENSOR I2C translated - must be set by sensor driver */ -+ if (strcmp(priv->cable_mode, "coax") == 0) { -+ reg8_write(client, 0x6d, 0x7f); /* Coax, RAW10 */ -+ } else if (strcmp(priv->cable_mode, "stp") == 0) { -+ reg8_write(client, 0x6d, 0x78); /* STP, CSI */ -+ } -+ reg8_write(client, 0x70, (idx << 6) | 0x1e); /* CSI data type: yuv422 8-bit, assign VC */ -+ reg8_write(client, 0x7c, 0x81); /* BIT(7) - magic to Use RAW10 as 8-bit mode */ -+ reg8_write(client, 0x6e, 0x88); /* Sensor reset: backchannel GPIO0/GPIO1 set low */ -+} -+ -+static int ti954_ti9x3_initialize(struct i2c_client *client) -+{ -+ struct ti954_ti9x3_priv *priv = i2c_get_clientdata(client); -+ int idx; -+ -+ dev_info(&client->dev, "LINKs=%d, LANES=%d, FORWARDING=%s, CABLE=%s, ID=%s\n", -+ priv->links, priv->lanes, priv->forwarding_mode, priv->cable_mode, priv->chip_id); -+ -+ ti954_ti9x3_initial_setup(client); -+ -+ for (idx = 0; idx < priv->links; idx++) { -+ if (!IS_ERR(priv->poc_supply[idx])) { -+ if (regulator_enable(priv->poc_supply[idx])) -+ dev_err(&client->dev, "fail to enable POC%d regulator\n", idx); -+ mdelay(priv->poc_delay); -+ } -+ -+ ti954_ti9x3_fpdlink3_setup(client, idx); -+ } -+ -+ client->addr = priv->des_addr; -+ -+ return 0; -+} -+ -+#ifdef CONFIG_VIDEO_ADV_DEBUG -+static int ti954_ti9x3_g_register(struct v4l2_subdev *sd, -+ struct v4l2_dbg_register *reg) -+{ -+ struct ti954_ti9x3_priv *priv = v4l2_get_subdevdata(sd); -+ struct i2c_client *client = priv->client; -+ int ret; -+ u8 val = 0; -+ -+ ret = reg8_read(client, (u8)reg->reg, &val); -+ if (ret < 0) -+ return ret; -+ -+ reg->val = val; -+ reg->size = sizeof(u8); -+ -+ return 0; -+} -+ -+static int ti954_ti9x3_s_register(struct v4l2_subdev *sd, -+ const struct v4l2_dbg_register *reg) -+{ -+ struct ti954_ti9x3_priv *priv = v4l2_get_subdevdata(sd); -+ struct i2c_client *client = priv->client; -+ -+ return reg8_write(client, (u8)reg->reg, (u8)reg->val); -+} -+#endif -+ -+static int ti954_ti9x3_s_power(struct v4l2_subdev *sd, int on) -+{ -+ struct ti954_ti9x3_priv *priv = v4l2_get_subdevdata(sd); -+ struct i2c_client *client = priv->client; -+ -+ if (on) { -+ if (atomic_inc_return(&priv->use_count) == 1) -+ reg8_write(client, 0x20, 0x00); /* enable port forwarding to CSI */ -+ } else { -+ if (atomic_dec_return(&priv->use_count) == 0) -+ reg8_write(client, 0x20, 0xf0); /* disable port forwarding to CSI */ -+ } -+ -+ return 0; -+} -+ -+static int ti954_ti9x3_registered_async(struct v4l2_subdev *sd) -+{ -+ struct ti954_ti9x3_priv *priv = v4l2_get_subdevdata(sd); -+ struct i2c_client *client = priv->client; -+ -+ reg8_write(client, 0x33, ((priv->lanes - 1) ^ 0x3) << 4 | 0x1); /* enable CSI output, set CSI lane count, non-continuous CSI mode */ -+ -+ return 0; -+} + -+static struct v4l2_subdev_core_ops ti954_ti9x3_subdev_core_ops = { -+#ifdef CONFIG_VIDEO_ADV_DEBUG -+ .g_register = ti954_ti9x3_g_register, -+ .s_register = ti954_ti9x3_s_register, -+#endif -+ .s_power = ti954_ti9x3_s_power, -+ .registered_async = ti954_ti9x3_registered_async, -+}; -+ -+static struct v4l2_subdev_ops ti954_ti9x3_subdev_ops = { -+ .core = &ti954_ti9x3_subdev_core_ops, -+}; -+ -+static int ti954_ti9x3_parse_dt(struct i2c_client *client) -+{ -+ struct ti954_ti9x3_priv *priv = i2c_get_clientdata(client); -+ struct device_node *np = client->dev.of_node; -+ struct device_node *endpoint = NULL, *rendpoint = NULL; -+ struct property *prop; -+ int err, i; -+ int sensor_delay; -+ char forwarding_mode_default[20] = "round-robin"; /* round-robin, synchronized */ -+ char cable_mode_default[5] = "coax"; /* coax, stp */ -+ struct property *csi_rate_prop, *dvp_order_prop; -+ u8 val = 0; -+ -+ if (of_property_read_u32(np, "ti,links", &priv->links)) -+ priv->links = 2; -+ -+ if (of_property_read_u32(np, "ti,lanes", &priv->lanes)) -+ priv->lanes = 4; -+ -+ priv->xtal_gpio = of_get_gpio(np, 0); -+ if (priv->xtal_gpio > 0) { -+ err = devm_gpio_request_one(&client->dev, priv->xtal_gpio, GPIOF_OUT_INIT_LOW, dev_name(&client->dev)); -+ if (err) -+ dev_err(&client->dev, "cannot request XTAL gpio %d: %d\n", priv->xtal_gpio, err); -+ else -+ mdelay(250); -+ } -+ -+ reg8_read(client, 0x00, &val); /* read TI954 I2C address */ -+ if (val != (priv->des_addr << 1)) { -+ prop = of_find_property(np, "reg", NULL); -+ if (prop) -+ of_remove_property(np, prop); -+ return -ENODEV; -+ } -+ -+ ti954_ti9x3_read_chipid(client); -+ -+ indirect_write(client, 7, 0x15, 0x30); -+ gpio_set_value(priv->xtal_gpio, 1); -+ usleep_range(5000, 5500); /* wait 5ms */ -+ indirect_write(client, 7, 0x15, 0); -+ -+ if (!of_property_read_u32(np, "ti,sensor_delay", &sensor_delay)) -+ mdelay(sensor_delay); -+ if (of_property_read_string(np, "ti,forwarding-mode", &priv->forwarding_mode)) -+ priv->forwarding_mode = forwarding_mode_default; -+ if (of_property_read_string(np, "ti,cable-mode", &priv->cable_mode)) -+ priv->cable_mode = cable_mode_default; -+ if (of_property_read_u32(np, "ti,poc-delay", &priv->poc_delay)) -+ priv->poc_delay = 50; -+ -+ /* module params override dts */ -+ if (poc_delay) -+ priv->poc_delay = poc_delay; -+ -+ for (i = 0; ; i++) { -+ endpoint = of_graph_get_next_endpoint(np, endpoint); -+ if (!endpoint) -+ break; -+ -+ of_node_put(endpoint); -+ -+ if (i < priv->links) { -+ if (of_property_read_u32(endpoint, "ti9x3-addr", &priv->ti9x3_addr_map[i])) { -+ dev_err(&client->dev, "ti9x3-addr not set\n"); -+ return -EINVAL; -+ } -+ priv->sd_of_node[i] = endpoint; -+ } -+ -+ rendpoint = of_parse_phandle(endpoint, "remote-endpoint", 0); -+ if (!rendpoint) -+ continue; -+ -+ csi_rate_prop = of_find_property(endpoint, "csi-rate", NULL); -+ if (csi_rate_prop) { -+ of_property_read_u32(endpoint, "csi-rate", &priv->csi_rate); -+ of_update_property(rendpoint, csi_rate_prop); -+ } -+ -+ dvp_order_prop = of_find_property(endpoint, "dvp-order", NULL); -+ if (dvp_order_prop) -+ of_update_property(rendpoint, dvp_order_prop); -+ } -+ -+ return 0; -+} -+ -+static int ti954_ti9x3_probe(struct i2c_client *client, -+ const struct i2c_device_id *did) -+{ -+ struct ti954_ti9x3_priv *priv; -+ int err, i; -+ char supply_name[10]; -+ -+ priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL); -+ if (!priv) -+ return -ENOMEM; -+ -+ i2c_set_clientdata(client, priv); -+ priv->des_addr = client->addr; -+ priv->client = client; -+ atomic_set(&priv->use_count, 0); -+ -+ err = ti954_ti9x3_parse_dt(client); -+ if (err) -+ goto out; -+ -+ for (i = 0; i < 4; i++) { -+ sprintf(supply_name, "POC%d", i); -+ priv->poc_supply[i] = devm_regulator_get_optional(&client->dev, supply_name); -+ } -+ -+ err = ti954_ti9x3_initialize(client); -+ if (err < 0) -+ goto out; -+ -+ for (i = 0; i < priv->links; i++) { -+ v4l2_subdev_init(&priv->sd[i], &ti954_ti9x3_subdev_ops); -+ priv->sd[i].owner = client->dev.driver->owner; -+ priv->sd[i].dev = &client->dev; -+ priv->sd[i].grp_id = i; -+ v4l2_set_subdevdata(&priv->sd[i], priv); -+ priv->sd[i].of_node = priv->sd_of_node[i]; -+ -+ snprintf(priv->sd[i].name, V4L2_SUBDEV_NAME_SIZE, "%s %d-%04x", -+ client->dev.driver->name, i2c_adapter_id(client->adapter), -+ client->addr); -+ -+ err = v4l2_async_register_subdev(&priv->sd[i]); -+ if (err < 0) -+ goto out; -+ } -+ -+out: -+ return err; -+} -+ -+static int ti954_ti9x3_remove(struct i2c_client *client) -+{ -+ struct ti954_ti9x3_priv *priv = i2c_get_clientdata(client); -+ int i; -+ -+ for (i = 0; i < priv->links; i++) { -+ v4l2_async_unregister_subdev(&priv->sd[i]); -+ v4l2_device_unregister_subdev(&priv->sd[i]); -+ } -+ -+ return 0; -+} -+ -+static const struct of_device_id ti954_ti9x3_dt_ids[] = { -+ { .compatible = "ti,ti954-ti9x3" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, ti954_ti9x3_dt_ids); -+ -+static const struct i2c_device_id ti954_ti9x3_id[] = { -+ { "ti954_ti9x3", 0 }, -+ { } -+}; -+MODULE_DEVICE_TABLE(i2c, ti954_ti9x3_id); -+ -+static struct i2c_driver ti954_ti9x3_i2c_driver = { -+ .driver = { -+ .name = "ti954_ti9x3", -+ .of_match_table = of_match_ptr(ti954_ti9x3_dt_ids), -+ }, -+ .probe = ti954_ti9x3_probe, -+ .remove = ti954_ti9x3_remove, -+ .id_table = ti954_ti9x3_id, -+}; -+ -+module_i2c_driver(ti954_ti9x3_i2c_driver); -+ -+MODULE_DESCRIPTION("FPDLinkIII driver for TI954-TI9X3"); -+MODULE_AUTHOR("Vladimir Barinov"); -+MODULE_LICENSE("GPL"); -diff --git a/drivers/media/i2c/soc_camera/ti964_ti9x3.c b/drivers/media/i2c/soc_camera/ti964_ti9x3.c -new file mode 100644 -index 0000000..8393392 ---- /dev/null -+++ b/drivers/media/i2c/soc_camera/ti964_ti9x3.c -@@ -0,0 +1,408 @@ -+/* -+ * TI (ti964/ti960)-(ti913/ti953) FPDLinkIII driver -+ * -+ * Copyright (C) 2017 Cogent Embedded, Inc. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+ -+#include <linux/delay.h> -+#include <linux/i2c.h> -+#include <linux/module.h> -+#include <linux/notifier.h> -+#include <linux/of_gpio.h> -+#include <linux/regulator/consumer.h> -+#include <linux/videodev2.h> -+ -+#include <media/v4l2-common.h> -+#include <media/v4l2-device.h> -+#include <media/v4l2-of.h> -+#include <media/v4l2-subdev.h> -+ -+#include "ti9x4_ti9x3.h" -+ -+struct ti964_ti9x3_priv { -+ struct v4l2_subdev sd[4]; -+ struct device_node *sd_of_node[4]; -+ int des_addr; -+ int links; -+ int lanes; -+ int csi_rate; -+ const char *forwarding_mode; -+ const char *cable_mode; -+ int poc_delay; -+ atomic_t use_count; -+ struct i2c_client *client; -+ int ti9x3_addr_map[4]; -+ char chip_id[6]; -+ struct regulator *poc_supply[4]; /* PoC power supply */ -+}; -+ -+static int poc_delay; -+module_param(poc_delay, int, 0644); -+MODULE_PARM_DESC(poc_delay, " Delay in ms after POC enable (default: 0 ms) */"); -+ -+static void ti964_ti9x3_read_chipid(struct i2c_client *client) -+{ -+ struct ti964_ti9x3_priv *priv = i2c_get_clientdata(client); -+ -+ /* Chip ID */ -+ reg8_read(client, 0xf1, &priv->chip_id[0]); -+ reg8_read(client, 0xf2, &priv->chip_id[1]); -+ reg8_read(client, 0xf3, &priv->chip_id[2]); -+ reg8_read(client, 0xf4, &priv->chip_id[3]); -+ reg8_read(client, 0xf5, &priv->chip_id[4]); -+ priv->chip_id[5] = '\0'; -+} -+ -+static void ti964_ti9x3_initial_setup(struct i2c_client *client) -+{ -+ struct ti964_ti9x3_priv *priv = i2c_get_clientdata(client); -+ -+ /* Initial setup */ -+ client->addr = priv->des_addr; /* TI964 I2C */ -+ reg8_write(client, 0x08, 0x1c); /* I2C glitch filter depth */ -+ reg8_write(client, 0x0a, 0x79); /* I2C high pulse width */ -+ reg8_write(client, 0x0b, 0x79); /* I2C low pulse width */ -+ reg8_write(client, 0x0d, 0xb9); /* VDDIO 3.3V */ -+ switch (priv->csi_rate) { -+ case 1600: /* REFCLK = 25MHZ */ -+ case 1450: /* REFCLK = 22.5MHZ */ -+ reg8_write(client, 0x1f, 0x00); /* CSI rate 1.5/1.6Gbps */ ++ switch (priv->ser_id) { ++ case TI913_ID: ++ reg8_write(client, 0x58, 0x58); /* Back channel: Freq=2.5Mbps */ + break; -+ case 800: /* REFCLK = 25MHZ */ -+ case 700: /* REFCLK = 22.5MHZ */ -+ reg8_write(client, 0x1f, 0x02); /* CSI rate 700/800Mbps */ -+ break; -+ case 400: /* REFCLK = 25MHZ */ -+ reg8_write(client, 0x1f, 0x03); /* CSI rate 400Mbps */ ++ case TI953_ID: ++ reg8_write(client, 0x58, 0x5e); /* Back channel: Freq=50Mbps */ + break; + default: -+ dev_err(&client->dev, "unsupported CSI rate %d\n", priv->csi_rate); -+ } -+ -+ if (strcmp(priv->forwarding_mode, "round-robin") == 0) { -+ reg8_write(client, 0x21, 0x01); /* Round Robin forwarding enable */ -+ } else if (strcmp(priv->forwarding_mode, "synchronized") == 0) { -+ reg8_write(client, 0x21, 0x44); /* Basic Syncronized forwarding enable (FrameSync must be enabled!!) */ ++ break; + } + -+ reg8_write(client, 0x32, 0x01); /* Select TX (CSI) port 0 */ -+ reg8_write(client, 0x33, ((priv->lanes - 1) ^ 0x3) << 4); /* disable CSI output, set CSI lane count, non-continuous CSI mode */ -+ reg8_write(client, 0x20, 0xf0); /* disable port forwarding */ -+#if 0 -+ /* FrameSync setup for REFCLK=25MHz, FPS=30: period_counts=1/2/FPS*25MHz =1/2/30*25Mhz =416666 -> FS_TIME=416666 */ -+ /* FrameSync setup for REFCLK=22.5MHz, FPS=30: period_counts=1/2/FPS*22.5Mhz=1/2/30*22.5Mhz=375000 -> FS_TIME=375000 */ -+// #define FS_TIME (priv->csi_rate == 1450 ? 376000 : 417666) -+ #define FS_TIME (priv->csi_rate == 1450 ? 385000 : 428000) // FPS=29.2 (new vendor's firmware AWB restriction?) -+ reg8_write(client, 0x1a, FS_TIME >> 16); /* FrameSync time 24bit */ -+ reg8_write(client, 0x1b, (FS_TIME >> 8) & 0xff); -+ reg8_write(client, 0x1c, FS_TIME & 0xff); -+ reg8_write(client, 0x18, 0x43); /* Enable FrameSync, 50/50 mode, Frame clock from 25MHz */ -+#else -+ /* FrameSync setup for REFCLK=25MHz, FPS=30: period_counts=1/FPS/12mks=1/30/12e-6=2777 -> HI=2, LO=2775 */ -+ /* FrameSync setup for REFCLK=22.5MHz, FPS=30: period_counts=1/FPS/13.333mks=1/30/13.333e-6=2500 -> HI=2, LO=2498 */ -+ #define FS_TIME (priv->csi_rate == 1450 ? (2498+15) : (2775+15)) -+ reg8_write(client, 0x19, 2 >> 8); /* FrameSync high time MSB */ -+ reg8_write(client, 0x1a, 2 & 0xff); /* FrameSync high time LSB */ -+ reg8_write(client, 0x1b, FS_TIME >> 8); /* FrameSync low time MSB */ -+ reg8_write(client, 0x1c, FS_TIME & 0xff); /* FrameSync low time LSB */ -+ reg8_write(client, 0x18, 0x01); /* Enable FrameSync, HI/LO mode, Frame clock from port0 */ -+#endif -+} -+ -+//#define SENSOR_ID 0x30 // ov10635 -+//#define SENSOR_ID 0x24 // ov490 -+ -+static void ti964_ti9x3_fpdlink3_setup(struct i2c_client *client, int idx) -+{ -+ struct ti964_ti9x3_priv *priv = i2c_get_clientdata(client); -+ -+ /* FPDLinkIII setup */ -+ client->addr = priv->des_addr; /* TI964 I2C */ -+ reg8_write(client, 0x4c, (idx << 4) | (1 << idx)); /* Select RX port number */ -+ usleep_range(2000, 2500); /* wait 2ms */ -+ reg8_write(client, 0x58, 0x58); /* Back channel: pass-through/backchannel/CRC enable, Freq=2.5Mbps */ + reg8_write(client, 0x5c, priv->ti9x3_addr_map[idx] << 1); /* TI9X3 I2C addr */ +// reg8_write(client, 0x5d, SENSOR_ID << 1); /* SENSOR I2C native - must be set by sensor driver */ +// reg8_write(client, 0x65, (0x60 + idx) << 1); /* SENSOR I2C translated - must be set by sensor driver */ -+ if (strcmp(priv->cable_mode, "coax") == 0) { -+ reg8_write(client, 0x6d, 0x7f); /* Coax, RAW10 */ -+ } else if (strcmp(priv->cable_mode, "stp") == 0) { -+ reg8_write(client, 0x6d, 0x78); /* STP, CSI */ ++ ++ if (priv->is_coax) ++ port_config |= 0x04; /* Coax */ ++ else ++ port_config |= 0x00; /* STP */ ++ ++ switch (priv->dvp_bus) { ++ case 8: ++ port_config2 |= 0x80; /* RAW10 as 8-bit prosessing using upper bits */ ++ /* fall through */ ++ case 10: ++ port_config |= 0x03; /* DVP over FPDLink (TI913 compatible) RAW10/RAW8 */ ++ break; ++ case 12: ++ port_config |= 0x02; /* DVP over FPDLink (TI913 compatible) RAW12 */ ++ break; ++ default: ++ port_config |= 0x00; /* CSI over FPDLink (TI953 compatible) */ + } ++ ++ if (priv->vsync) ++ port_config2 |= 0x01; /* VSYNC acive low */ ++ if (priv->hsync) ++ port_config2 |= 0x02; /* HSYNC acive low */ ++ ++ reg8_write(client, 0x6d, port_config); ++ reg8_write(client, 0x7c, port_config2); + reg8_write(client, 0x70, (idx << 6) | 0x1e); /* CSI data type: yuv422 8-bit, assign VC */ -+ reg8_write(client, 0x7c, 0x81); /* BIT(7) - magic to Use RAW10 as 8-bit mode */ ++ reg8_write(client, 0x71, (idx << 6) | 0x2a); /* CSI data type: RAW8, assign VC */ ++ reg8_write(client, 0xbc, 0x00); /* Setup minimal time between FV and LV to 3 PCLKs */ + reg8_write(client, 0x6e, 0x88); /* Sensor reset: backchannel GPIO0/GPIO1 set low */ +} + -+static int ti964_ti9x3_initialize(struct i2c_client *client) ++static int ti9x4_initialize(struct i2c_client *client) +{ -+ struct ti964_ti9x3_priv *priv = i2c_get_clientdata(client); ++ struct ti9x4_priv *priv = i2c_get_clientdata(client); + int idx; + + dev_info(&client->dev, "LINKs=%d, LANES=%d, FORWARDING=%s, CABLE=%s, ID=%s\n", -+ priv->links, priv->lanes, priv->forwarding_mode, priv->cable_mode, priv->chip_id); ++ priv->links, priv->lanes, priv->forwarding_mode, priv->is_coax ? "coax" : "stp", priv->chip_id); + -+ ti964_ti9x3_initial_setup(client); ++ ti9x4_initial_setup(client); + + for (idx = 0; idx < priv->links; idx++) { + if (!IS_ERR(priv->poc_supply[idx])) { @@ -7188,7 +7356,7 @@ index 0000000..8393392 + mdelay(priv->poc_delay); + } + -+ ti964_ti9x3_fpdlink3_setup(client, idx); ++ ti9x4_fpdlink3_setup(client, idx); + } + + client->addr = priv->des_addr; @@ -7197,10 +7365,10 @@ index 0000000..8393392 +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG -+static int ti964_ti9x3_g_register(struct v4l2_subdev *sd, ++static int ti9x4_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ -+ struct ti964_ti9x3_priv *priv = v4l2_get_subdevdata(sd); ++ struct ti9x4_priv *priv = v4l2_get_subdevdata(sd); + struct i2c_client *client = priv->client; + int ret; + u8 val = 0; @@ -7215,19 +7383,19 @@ index 0000000..8393392 + return 0; +} + -+static int ti964_ti9x3_s_register(struct v4l2_subdev *sd, ++static int ti9x4_s_register(struct v4l2_subdev *sd, + const struct v4l2_dbg_register *reg) +{ -+ struct ti964_ti9x3_priv *priv = v4l2_get_subdevdata(sd); ++ struct ti9x4_priv *priv = v4l2_get_subdevdata(sd); + struct i2c_client *client = priv->client; + + return reg8_write(client, (u8)reg->reg, (u8)reg->val); +} +#endif + -+static int ti964_ti9x3_s_power(struct v4l2_subdev *sd, int on) ++static int ti9x4_s_power(struct v4l2_subdev *sd, int on) +{ -+ struct ti964_ti9x3_priv *priv = v4l2_get_subdevdata(sd); ++ struct ti9x4_priv *priv = v4l2_get_subdevdata(sd); + struct i2c_client *client = priv->client; + + if (on) { @@ -7241,9 +7409,9 @@ index 0000000..8393392 + return 0; +} + -+static int ti964_ti9x3_registered_async(struct v4l2_subdev *sd) ++static int ti9x4_registered_async(struct v4l2_subdev *sd) +{ -+ struct ti964_ti9x3_priv *priv = v4l2_get_subdevdata(sd); ++ struct ti9x4_priv *priv = v4l2_get_subdevdata(sd); + struct i2c_client *client = priv->client; + + reg8_write(client, 0x33, ((priv->lanes - 1) ^ 0x3) << 4 | 0x1); /* enable CSI output, set CSI lane count, non-continuous CSI mode */ @@ -7251,29 +7419,28 @@ index 0000000..8393392 + return 0; +} + -+static struct v4l2_subdev_core_ops ti964_ti9x3_subdev_core_ops = { ++static struct v4l2_subdev_core_ops ti9x4_subdev_core_ops = { +#ifdef CONFIG_VIDEO_ADV_DEBUG -+ .g_register = ti964_ti9x3_g_register, -+ .s_register = ti964_ti9x3_s_register, ++ .g_register = ti9x4_g_register, ++ .s_register = ti9x4_s_register, +#endif -+ .s_power = ti964_ti9x3_s_power, -+ .registered_async = ti964_ti9x3_registered_async, ++ .s_power = ti9x4_s_power, ++ .registered_async = ti9x4_registered_async, +}; + -+static struct v4l2_subdev_ops ti964_ti9x3_subdev_ops = { -+ .core = &ti964_ti9x3_subdev_core_ops, ++static struct v4l2_subdev_ops ti9x4_subdev_ops = { ++ .core = &ti9x4_subdev_core_ops, +}; + -+static int ti964_ti9x3_parse_dt(struct i2c_client *client) ++static int ti9x4_parse_dt(struct i2c_client *client) +{ -+ struct ti964_ti9x3_priv *priv = i2c_get_clientdata(client); ++ struct ti9x4_priv *priv = i2c_get_clientdata(client); + struct device_node *np = client->dev.of_node; + struct device_node *endpoint = NULL, *rendpoint = NULL; + struct property *prop; + int err, pwen, i; + int sensor_delay; + char forwarding_mode_default[20] = "round-robin"; /* round-robin, synchronized */ -+ char cable_mode_default[5] = "coax"; /* coax, stp */ + struct property *csi_rate_prop, *dvp_order_prop; + u8 val = 0; + @@ -7285,14 +7452,14 @@ index 0000000..8393392 + + pwen = of_get_gpio(np, 0); + if (pwen > 0) { -+ err = devm_gpio_request_one(&client->dev, pwen, GPIOF_OUT_INIT_HIGH, dev_name(&client->dev)); ++ err = devm_gpio_request_one(&client->dev, pwen, GPIOF_OUT_INIT_LOW, dev_name(&client->dev)); + if (err) + dev_err(&client->dev, "cannot request PWEN gpio %d: %d\n", pwen, err); + else + mdelay(250); + } + -+ reg8_read(client, 0x00, &val); /* read TI964 I2C address */ ++ reg8_read(client, 0x00, &val); /* read TI9x4 I2C address */ + if (val != (priv->des_addr << 1)) { + prop = of_find_property(np, "reg", NULL); + if (prop) @@ -7300,18 +7467,45 @@ index 0000000..8393392 + return -ENODEV; + } + -+ ti964_ti9x3_read_chipid(client); ++ ti9x4_read_chipid(client); + ++#ifdef TI954_SILICON_ERRATA ++ indirect_write(client, 7, 0x15, 0x30); ++ if (pwen > 0) ++ gpio_set_value(pwen, 1); ++ usleep_range(5000, 5500); /* wait 5ms */ ++ indirect_write(client, 7, 0x15, 0); ++#endif + if (!of_property_read_u32(np, "ti,sensor_delay", &sensor_delay)) + mdelay(sensor_delay); + if (of_property_read_string(np, "ti,forwarding-mode", &priv->forwarding_mode)) + priv->forwarding_mode = forwarding_mode_default; -+ if (of_property_read_string(np, "ti,cable-mode", &priv->cable_mode)) -+ priv->cable_mode = cable_mode_default; ++ if (of_property_read_bool(np, "ti,stp")) ++ priv->is_coax = 0; ++ else ++ priv->is_coax = 1; ++ if (of_property_read_u32(np, "ti,dvp_bus", &priv->dvp_bus)) ++ priv->dvp_bus = 8; ++ if (of_property_read_u32(np, "ti,hsync", &priv->hsync)) ++ priv->vsync = 0; ++ if (of_property_read_u32(np, "ti,vsync", &priv->vsync)) ++ priv->vsync = 1; ++ if (of_property_read_u32(np, "ti,ser_id", &priv->ser_id)) ++ priv->ser_id = TI913_ID; + if (of_property_read_u32(np, "ti,poc-delay", &priv->poc_delay)) + priv->poc_delay = 50; + + /* module params override dts */ ++ if (is_stp) ++ priv->is_coax = 0; ++ if (dvp_bus != 8) ++ priv->dvp_bus = dvp_bus; ++ if (hsync) ++ priv->hsync = hsync; ++ if (!vsync) ++ priv->vsync = vsync; ++ if (ser_id) ++ priv->ser_id = ser_id; + if (poc_delay) + priv->poc_delay = poc_delay; + @@ -7348,10 +7542,10 @@ index 0000000..8393392 + return 0; +} + -+static int ti964_ti9x3_probe(struct i2c_client *client, ++static int ti9x4_probe(struct i2c_client *client, + const struct i2c_device_id *did) +{ -+ struct ti964_ti9x3_priv *priv; ++ struct ti9x4_priv *priv; + int err, i; + char supply_name[10]; + @@ -7364,7 +7558,7 @@ index 0000000..8393392 + priv->client = client; + atomic_set(&priv->use_count, 0); + -+ err = ti964_ti9x3_parse_dt(client); ++ err = ti9x4_parse_dt(client); + if (err) + goto out; + @@ -7373,12 +7567,12 @@ index 0000000..8393392 + priv->poc_supply[i] = devm_regulator_get_optional(&client->dev, supply_name); + } + -+ err = ti964_ti9x3_initialize(client); ++ err = ti9x4_initialize(client); + if (err < 0) + goto out; + + for (i = 0; i < priv->links; i++) { -+ v4l2_subdev_init(&priv->sd[i], &ti964_ti9x3_subdev_ops); ++ v4l2_subdev_init(&priv->sd[i], &ti9x4_subdev_ops); + priv->sd[i].owner = client->dev.driver->owner; + priv->sd[i].dev = &client->dev; + priv->sd[i].grp_id = i; @@ -7398,9 +7592,9 @@ index 0000000..8393392 + return err; +} + -+static int ti964_ti9x3_remove(struct i2c_client *client) ++static int ti9x4_remove(struct i2c_client *client) +{ -+ struct ti964_ti9x3_priv *priv = i2c_get_clientdata(client); ++ struct ti9x4_priv *priv = i2c_get_clientdata(client); + int i; + + for (i = 0; i < priv->links; i++) { @@ -7411,39 +7605,39 @@ index 0000000..8393392 + return 0; +} + -+static const struct of_device_id ti964_ti9x3_dt_ids[] = { -+ { .compatible = "ti,ti964-ti9x3" }, ++static const struct of_device_id ti9x4_dt_ids[] = { ++ { .compatible = "ti,ti9x4" }, + {}, +}; -+MODULE_DEVICE_TABLE(of, ti964_ti9x3_dt_ids); ++MODULE_DEVICE_TABLE(of, ti9x4_dt_ids); + -+static const struct i2c_device_id ti964_ti9x3_id[] = { -+ { "ti964_ti9x3", 0 }, ++static const struct i2c_device_id ti9x4_id[] = { ++ { "ti9x4", 0 }, + { } +}; -+MODULE_DEVICE_TABLE(i2c, ti964_ti9x3_id); ++MODULE_DEVICE_TABLE(i2c, ti9x4_id); + -+static struct i2c_driver ti964_ti9x3_i2c_driver = { ++static struct i2c_driver ti9x4_i2c_driver = { + .driver = { -+ .name = "ti964_ti9x3", -+ .of_match_table = of_match_ptr(ti964_ti9x3_dt_ids), ++ .name = "ti9x4", ++ .of_match_table = of_match_ptr(ti9x4_dt_ids), + }, -+ .probe = ti964_ti9x3_probe, -+ .remove = ti964_ti9x3_remove, -+ .id_table = ti964_ti9x3_id, ++ .probe = ti9x4_probe, ++ .remove = ti9x4_remove, ++ .id_table = ti9x4_id, +}; + -+module_i2c_driver(ti964_ti9x3_i2c_driver); ++module_i2c_driver(ti9x4_i2c_driver); + -+MODULE_DESCRIPTION("FPDLinkIII driver for TI964-TI9X3"); ++MODULE_DESCRIPTION("FPDLinkIII driver for DS90UB9x4"); +MODULE_AUTHOR("Vladimir Barinov"); +MODULE_LICENSE("GPL"); -diff --git a/drivers/media/i2c/soc_camera/ti9x4_ti9x3.h b/drivers/media/i2c/soc_camera/ti9x4_ti9x3.h +diff --git a/drivers/media/i2c/soc_camera/ti9x4.h b/drivers/media/i2c/soc_camera/ti9x4.h new file mode 100644 -index 0000000..69d3728 +index 0000000..b53b4c6 --- /dev/null -+++ b/drivers/media/i2c/soc_camera/ti9x4_ti9x3.h -@@ -0,0 +1,153 @@ ++++ b/drivers/media/i2c/soc_camera/ti9x4.h +@@ -0,0 +1,156 @@ +/* + * TI FPDLinkIII driver include file + * @@ -7465,6 +7659,9 @@ index 0000000..69d3728 +#endif + +#define MAXIM_NUM_RETRIES 1 /* number of read/write retries */ ++#define TI913_ID 0x58 ++#define TI953_ID 0x30 /* or starapped to 0x32 */ ++#define TI9X4_ID 0x00 /* strapped */ +#define BROADCAST 0x6f + +static inline int reg8_read(struct i2c_client *client, u8 reg, u8 *val) @@ -8084,7 +8281,7 @@ index 4d95da6..2ef27e8 100644 return 0; diff --git a/drivers/media/platform/soc_camera/rcar_vin.c b/drivers/media/platform/soc_camera/rcar_vin.c -index 74fb005..ac75af6 100644 +index 74fb005..f6119e5 100644 --- a/drivers/media/platform/soc_camera/rcar_vin.c +++ b/drivers/media/platform/soc_camera/rcar_vin.c @@ -95,17 +95,21 @@ @@ -8249,7 +8446,7 @@ index 74fb005..ac75af6 100644 while (priv->state != STOPPED) { /* issue stop if running */ if (priv->state == RUNNING) -@@ -1361,6 +1422,31 @@ static struct v4l2_subdev *find_csi2(struct rcar_vin_priv *pcdev) +@@ -1361,6 +1422,26 @@ static struct v4l2_subdev *find_csi2(struct rcar_vin_priv *pcdev) return NULL; } @@ -8257,8 +8454,7 @@ index 74fb005..ac75af6 100644 +{ + struct v4l2_subdev *sd; + char name[] = "max9286"; -+ char name2[] = "ti964_ti9x3"; -+ char name3[] = "ti954_ti9x3"; ++ char name2[] = "ti9x4"; + + v4l2_device_for_each_subdev(sd, &pcdev->ici.v4l2_dev) { + if (!strncmp(name, sd->name, sizeof(name) - 1)) { @@ -8269,10 +8465,6 @@ index 74fb005..ac75af6 100644 + pcdev->deser_sd = sd; + return sd; + } -+ if (!strncmp(name3, sd->name, sizeof(name3) - 1)) { -+ pcdev->deser_sd = sd; -+ return sd; -+ } + } + + return NULL; @@ -8281,7 +8473,7 @@ index 74fb005..ac75af6 100644 static int rcar_vin_add_device(struct soc_camera_device *icd) { struct soc_camera_host *ici = to_soc_camera_host(icd->parent); -@@ -1375,7 +1461,8 @@ static int rcar_vin_add_device(struct soc_camera_device *icd) +@@ -1375,7 +1456,8 @@ static int rcar_vin_add_device(struct soc_camera_device *icd) if (priv->chip == RCAR_H3 || priv->chip == RCAR_M3 || priv->chip == RCAR_V3M) { struct v4l2_subdev *csi2_sd = find_csi2(priv); @@ -8291,7 +8483,7 @@ index 74fb005..ac75af6 100644 if (csi2_sd) { csi2_sd->grp_id = soc_camera_grp_id(icd); -@@ -1390,6 +1477,18 @@ static int rcar_vin_add_device(struct soc_camera_device *icd) +@@ -1390,6 +1472,18 @@ static int rcar_vin_add_device(struct soc_camera_device *icd) if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV) return ret; } @@ -8310,7 +8502,7 @@ index 74fb005..ac75af6 100644 /* * -ENODEV is special: * either csi2_sd == NULL or the CSI-2 driver -@@ -1417,6 +1516,7 @@ static void rcar_vin_remove_device(struct soc_camera_device *icd) +@@ -1417,6 +1511,7 @@ static void rcar_vin_remove_device(struct soc_camera_device *icd) struct rcar_vin_priv *priv = ici->priv; struct vb2_v4l2_buffer *vbuf; struct v4l2_subdev *csi2_sd = find_csi2(priv); @@ -8318,7 +8510,7 @@ index 74fb005..ac75af6 100644 int i; /* disable capture, disable interrupts */ -@@ -1443,6 +1543,8 @@ static void rcar_vin_remove_device(struct soc_camera_device *icd) +@@ -1443,6 +1538,8 @@ static void rcar_vin_remove_device(struct soc_camera_device *icd) if ((csi2_sd) && (priv->csi_sync)) v4l2_subdev_call(csi2_sd, core, s_power, 0); @@ -8327,7 +8519,7 @@ index 74fb005..ac75af6 100644 dev_dbg(icd->parent, "R-Car VIN driver detached from camera %d\n", icd->devnum); -@@ -1621,13 +1723,19 @@ static int rcar_vin_set_rect(struct soc_camera_device *icd) +@@ -1621,13 +1718,19 @@ static int rcar_vin_set_rect(struct soc_camera_device *icd) if (priv->chip == RCAR_H3 || priv->chip == RCAR_M3 || priv->chip == RCAR_V3M) { @@ -8349,7 +8541,7 @@ index 74fb005..ac75af6 100644 (icd->current_fmt->host_fmt->fourcc == V4L2_PIX_FMT_NV16) || (icd->current_fmt->host_fmt->fourcc == V4L2_PIX_FMT_NV12)) iowrite32(ALIGN(cam->out_width, 0x20), -@@ -1868,6 +1976,14 @@ static bool rcar_vin_packing_supported(const struct soc_mbus_pixelfmt *fmt) +@@ -1868,6 +1971,14 @@ static bool rcar_vin_packing_supported(const struct soc_mbus_pixelfmt *fmt) .layout = SOC_MBUS_LAYOUT_PACKED, }, { @@ -8364,7 +8556,7 @@ index 74fb005..ac75af6 100644 .fourcc = V4L2_PIX_FMT_RGB565, .name = "RGB565", .bits_per_sample = 16, -@@ -1899,6 +2015,22 @@ static bool rcar_vin_packing_supported(const struct soc_mbus_pixelfmt *fmt) +@@ -1899,6 +2010,22 @@ static bool rcar_vin_packing_supported(const struct soc_mbus_pixelfmt *fmt) .order = SOC_MBUS_ORDER_LE, .layout = SOC_MBUS_LAYOUT_PACKED, }, @@ -8387,7 +8579,7 @@ index 74fb005..ac75af6 100644 }; static int rcar_vin_get_formats(struct soc_camera_device *icd, unsigned int idx, -@@ -2012,6 +2144,8 @@ static int rcar_vin_get_formats(struct soc_camera_device *icd, unsigned int idx, +@@ -2012,6 +2139,8 @@ static int rcar_vin_get_formats(struct soc_camera_device *icd, unsigned int idx, case MEDIA_BUS_FMT_YUYV8_2X8: case MEDIA_BUS_FMT_YUYV10_2X10: case MEDIA_BUS_FMT_RGB888_1X24: @@ -8396,7 +8588,7 @@ index 74fb005..ac75af6 100644 if (cam->extra_fmt) break; -@@ -2218,12 +2352,15 @@ static int rcar_vin_set_fmt(struct soc_camera_device *icd, +@@ -2218,12 +2347,15 @@ static int rcar_vin_set_fmt(struct soc_camera_device *icd, case V4L2_PIX_FMT_ABGR32: case V4L2_PIX_FMT_UYVY: case V4L2_PIX_FMT_YUYV: @@ -8412,7 +8604,7 @@ index 74fb005..ac75af6 100644 default: can_scale = false; break; -@@ -2316,7 +2453,8 @@ static int rcar_vin_try_fmt(struct soc_camera_device *icd, +@@ -2316,7 +2448,8 @@ static int rcar_vin_try_fmt(struct soc_camera_device *icd, /* odd number clipping by pixel post clip processing, */ /* it is outputted to a memory per even pixels. */ if ((pixfmt == V4L2_PIX_FMT_NV16) || (pixfmt == V4L2_PIX_FMT_NV12) || @@ -8422,7 +8614,7 @@ index 74fb005..ac75af6 100644 v4l_bound_align_image(&pix->width, 5, priv->max_width, 1, &pix->height, 2, priv->max_height, 0, 0); else -@@ -2486,6 +2624,19 @@ static int rcar_vin_cropcap(struct soc_camera_device *icd, +@@ -2486,6 +2619,19 @@ static int rcar_vin_cropcap(struct soc_camera_device *icd, } #endif @@ -8442,7 +8634,7 @@ index 74fb005..ac75af6 100644 static struct soc_camera_host_ops rcar_vin_host_ops = { .owner = THIS_MODULE, .add = rcar_vin_add_device, -@@ -2504,6 +2655,7 @@ static int rcar_vin_cropcap(struct soc_camera_device *icd, +@@ -2504,6 +2650,7 @@ static int rcar_vin_cropcap(struct soc_camera_device *icd, .get_selection = rcar_vin_get_selection, .cropcap = rcar_vin_cropcap, #endif @@ -8450,7 +8642,7 @@ index 74fb005..ac75af6 100644 }; #ifdef CONFIG_OF -@@ -2524,7 +2676,7 @@ static int rcar_vin_cropcap(struct soc_camera_device *icd, +@@ -2524,7 +2671,7 @@ static int rcar_vin_cropcap(struct soc_camera_device *icd, MODULE_DEVICE_TABLE(of, rcar_vin_of_table); #endif @@ -8459,19 +8651,18 @@ index 74fb005..ac75af6 100644 static DECLARE_BITMAP(device_map, MAP_MAX_NUM); static DEFINE_MUTEX(list_lock); -@@ -2714,7 +2866,11 @@ static int rcar_vin_probe(struct platform_device *pdev) +@@ -2714,7 +2861,10 @@ static int rcar_vin_probe(struct platform_device *pdev) const char *str; unsigned int i; struct device_node *epn = NULL, *ren = NULL; -+ struct device_node *csi2_ren = NULL, *max9286_ren = NULL, *ti964_ren = NULL, *ti954_ren = NULL; ++ struct device_node *csi2_ren = NULL, *max9286_ren = NULL, *ti9x4_ren = NULL; bool csi_use = false; + bool max9286_use = false; -+ bool ti964_use = false; -+ bool ti954_use = false; ++ bool ti9x4_use = false; match = of_match_device(of_match_ptr(rcar_vin_of_table), &pdev->dev); -@@ -2741,13 +2897,27 @@ static int rcar_vin_probe(struct platform_device *pdev) +@@ -2741,13 +2891,22 @@ static int rcar_vin_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "node name:%s\n", of_node_full_name(ren->parent)); @@ -8489,21 +8680,16 @@ index 74fb005..ac75af6 100644 - if (i) - break; -+ if (strcmp(ren->parent->name, "ti964-ti9x3") == 0) { -+ ti964_ren = of_parse_phandle(epn, "remote-endpoint", 0); -+ ti964_use = true; -+ } -+ -+ if (strcmp(ren->parent->name, "ti954-ti9x3") == 0) { -+ ti954_ren = of_parse_phandle(epn, "remote-endpoint", 0); -+ ti954_use = true; ++ if (strcmp(ren->parent->name, "ti9x4") == 0) { ++ ti9x4_ren = of_parse_phandle(epn, "remote-endpoint", 0); ++ ti9x4_use = true; + } + + of_node_put(ren); } ret = v4l2_of_parse_endpoint(np, &ep); -@@ -2799,6 +2969,7 @@ static int rcar_vin_probe(struct platform_device *pdev) +@@ -2799,6 +2958,7 @@ static int rcar_vin_probe(struct platform_device *pdev) priv->ici.drv_name = dev_name(&pdev->dev); priv->ici.ops = &rcar_vin_host_ops; priv->csi_sync = false; @@ -8511,7 +8697,7 @@ index 74fb005..ac75af6 100644 priv->pdata_flags = pdata_flags; if (!match) { -@@ -2983,7 +3154,25 @@ static int rcar_vin_probe(struct platform_device *pdev) +@@ -2983,7 +3143,19 @@ static int rcar_vin_probe(struct platform_device *pdev) goto cleanup; if (csi_use) { @@ -8527,14 +8713,8 @@ index 74fb005..ac75af6 100644 + goto cleanup; + } + -+ if (ti964_use) { -+ ret = rcar_vin_soc_of_bind(priv, &priv->ici, epn, ti964_ren); -+ if (ret) -+ goto cleanup; -+ } -+ -+ if (ti954_use) { -+ ret = rcar_vin_soc_of_bind(priv, &priv->ici, epn, ti954_ren); ++ if (ti9x4_use) { ++ ret = rcar_vin_soc_of_bind(priv, &priv->ici, epn, ti9x4_ren); if (ret) goto cleanup; } diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch index 7755871..b351089 100644 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch @@ -21,6 +21,7 @@ Eagle board on R8A7797 SoC Eagle Function board on R8A7797 SoC V3MSK board on R8A7797 SoC V3MSK.View board on R8A7797 SoC +V3MZF board on R8A7797 SoC Videobox Mini board on R8A7795 ES1.x SoC Videobox Mini board on R8A7795 SoC Videobox Mini board on R8A7797 SoC @@ -30,14 +31,14 @@ Condor board on R8A7798 SoC Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> --- - arch/arm64/boot/dts/renesas/Makefile | 21 + + arch/arm64/boot/dts/renesas/Makefile | 22 + arch/arm64/boot/dts/renesas/legacy/Makefile | 8 + - .../renesas/legacy/r8a7795-es1-h3ulcb-kf-v0.dts | 1710 ++++++++++++++++++ + .../renesas/legacy/r8a7795-es1-h3ulcb-kf-v0.dts | 1624 ++++++++++++++++++ .../renesas/legacy/r8a7795-es1-h3ulcb-kf-v1.dts | 441 +++++ - .../dts/renesas/legacy/r8a7795-h3ulcb-kf-v0.dts | 1724 ++++++++++++++++++ - .../dts/renesas/legacy/r8a7795-h3ulcb-kf-v1.dts | 465 +++++ - .../dts/renesas/legacy/r8a7796-m3ulcb-kf-v0.dts | 1214 +++++++++++++ - .../dts/renesas/legacy/r8a7796-m3ulcb-kf-v1.dts | 465 +++++ + .../dts/renesas/legacy/r8a7795-h3ulcb-kf-v0.dts | 1638 +++++++++++++++++++ + .../dts/renesas/legacy/r8a7795-h3ulcb-kf-v1.dts | 465 ++++++ + .../dts/renesas/legacy/r8a7796-m3ulcb-kf-v0.dts | 1171 +++++++++++++ + .../dts/renesas/legacy/r8a7796-m3ulcb-kf-v1.dts | 465 ++++++ .../dts/renesas/legacy/r8a7797-v3msk-kf-v0.dts | 82 + .../boot/dts/renesas/legacy/ulcb-kf-cmos.dtsi | 75 + .../arm64/boot/dts/renesas/legacy/ulcb-kf-rpi.dtsi | 77 + @@ -49,7 +50,7 @@ Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> .../boot/dts/renesas/r8a7795-es1-h3ulcb-vb2.dts | 77 + .../boot/dts/renesas/r8a7795-es1-h3ulcb-vbm.dts | 26 + .../boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts | 544 ++++++ - .../dts/renesas/r8a7795-es1-salvator-x-view.dts | 550 ++++++ + .../dts/renesas/r8a7795-es1-salvator-x-view.dts | 550 +++++++ .../boot/dts/renesas/r8a7795-h3ulcb-had-alfa.dts | 22 + .../boot/dts/renesas/r8a7795-h3ulcb-had-beta.dts | 23 + .../arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi | 215 +++ @@ -58,26 +59,27 @@ Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb2.dts | 68 + arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vbm.dts | 26 + .../arm64/boot/dts/renesas/r8a7795-h3ulcb-view.dts | 544 ++++++ - .../boot/dts/renesas/r8a7795-salvator-x-view.dts | 550 ++++++ + .../boot/dts/renesas/r8a7795-salvator-x-view.dts | 550 +++++++ arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts | 40 + - .../arm64/boot/dts/renesas/r8a7796-m3ulcb-view.dts | 286 +++ + .../arm64/boot/dts/renesas/r8a7796-m3ulcb-view.dts | 286 ++++ .../boot/dts/renesas/r8a7796-salvator-x-view.dts | 317 ++++ .../boot/dts/renesas/r8a7797-eagle-function.dts | 62 + arch/arm64/boot/dts/renesas/r8a7797-eagle.dts | 575 +++++++ - arch/arm64/boot/dts/renesas/r8a7797-v3msk-kf.dts | 575 +++++++ - arch/arm64/boot/dts/renesas/r8a7797-v3msk-vbm.dts | 548 ++++++ + arch/arm64/boot/dts/renesas/r8a7797-v3msk-kf.dts | 533 ++++++ + arch/arm64/boot/dts/renesas/r8a7797-v3msk-vbm.dts | 548 +++++++ arch/arm64/boot/dts/renesas/r8a7797-v3msk-view.dts | 297 ++++ arch/arm64/boot/dts/renesas/r8a7797-v3msk.dts | 314 ++++ + arch/arm64/boot/dts/renesas/r8a7797-v3mzf.dts | 424 +++++ arch/arm64/boot/dts/renesas/r8a7798-condor.dts | 963 +++++++++++ - arch/arm64/boot/dts/renesas/ulcb-kf-cn11.dtsi | 545 ++++++ + arch/arm64/boot/dts/renesas/ulcb-kf-cn11.dtsi | 498 ++++++ arch/arm64/boot/dts/renesas/ulcb-kf-most.dtsi | 30 + arch/arm64/boot/dts/renesas/ulcb-kf-sd3.dtsi | 46 + - arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 1538 +++++++++++++++++ - arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi | 542 ++++++ - arch/arm64/boot/dts/renesas/ulcb-vb.dtsi | 1770 +++++++++++++++++++ - arch/arm64/boot/dts/renesas/ulcb-vb2.dtsi | 1820 ++++++++++++++++++++ + arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 1492 +++++++++++++++++ + arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi | 495 ++++++ + arch/arm64/boot/dts/renesas/ulcb-vb.dtsi | 1678 +++++++++++++++++++ + arch/arm64/boot/dts/renesas/ulcb-vb2.dtsi | 1724 ++++++++++++++++++++ arch/arm64/boot/dts/renesas/ulcb-vbm.dtsi | 577 +++++++ - 47 files changed, 20253 insertions(+) + 48 files changed, 20093 insertions(+) create mode 100644 arch/arm64/boot/dts/renesas/legacy/Makefile create mode 100644 arch/arm64/boot/dts/renesas/legacy/r8a7795-es1-h3ulcb-kf-v0.dts create mode 100644 arch/arm64/boot/dts/renesas/legacy/r8a7795-es1-h3ulcb-kf-v1.dts @@ -115,6 +117,7 @@ Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> create mode 100644 arch/arm64/boot/dts/renesas/r8a7797-v3msk-vbm.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7797-v3msk-view.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7797-v3msk.dts + create mode 100644 arch/arm64/boot/dts/renesas/r8a7797-v3mzf.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7798-condor.dts create mode 100644 arch/arm64/boot/dts/renesas/ulcb-kf-cn11.dtsi create mode 100644 arch/arm64/boot/dts/renesas/ulcb-kf-most.dtsi @@ -126,10 +129,10 @@ Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> create mode 100644 arch/arm64/boot/dts/renesas/ulcb-vbm.dtsi diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile -index f9c71df..3b5cff6 100644 +index f9c71df..6ca2c60 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile -@@ -6,5 +6,26 @@ dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb +@@ -6,5 +6,27 @@ dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-xs.dtb @@ -149,6 +152,7 @@ index f9c71df..3b5cff6 100644 +dtb-$(CONFIG_ARCH_R8A7797) += r8a7797-v3msk-view.dtb +dtb-$(CONFIG_ARCH_R8A7797) += r8a7797-v3msk-kf.dtb +dtb-$(CONFIG_ARCH_R8A7797) += r8a7797-v3msk-vbm.dtb ++dtb-$(CONFIG_ARCH_R8A7797) += r8a7797-v3mzf.dtb +dtb-$(CONFIG_ARCH_R8A7798) += r8a7798-condor.dtb + +# ADAS legacy boards @@ -172,10 +176,10 @@ index 0000000..7f25079 +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/renesas/legacy/r8a7795-es1-h3ulcb-kf-v0.dts b/arch/arm64/boot/dts/renesas/legacy/r8a7795-es1-h3ulcb-kf-v0.dts new file mode 100644 -index 0000000..fe07e22 +index 0000000..01aef82 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/legacy/r8a7795-es1-h3ulcb-kf-v0.dts -@@ -0,0 +1,1710 @@ +@@ -0,0 +1,1624 @@ +/* + * Device Tree Source for the H3ULCB Kingfisher V0 board on r8a7795 ES1.x + * @@ -764,11 +768,8 @@ index 0000000..fe07e22 + ov106xx_max9286_des0ep0: endpoint@0 { + remote-endpoint = <&max9286_des0ep0>; + }; -+ ov106xx_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; -+ }; -+ ov106xx_ti954_des0ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep0>; ++ ov106xx_ti9x4_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep0>; + }; + }; + }; @@ -788,11 +789,8 @@ index 0000000..fe07e22 + ov106xx_max9286_des0ep1: endpoint@0 { + remote-endpoint = <&max9286_des0ep1>; + }; -+ ov106xx_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; -+ }; -+ ov106xx_ti954_des0ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep1>; ++ ov106xx_ti9x4_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep1>; + }; + }; + }; @@ -812,8 +810,8 @@ index 0000000..fe07e22 + ov106xx_max9286_des0ep2: endpoint@0 { + remote-endpoint = <&max9286_des0ep2>; + }; -+ ov106xx_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; ++ ov106xx_ti9x4_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep2>; + }; + }; + }; @@ -833,15 +831,15 @@ index 0000000..fe07e22 + ov106xx_max9286_des0ep3: endpoint@0 { + remote-endpoint = <&max9286_des0ep3>; + }; -+ ov106xx_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; ++ ov106xx_ti9x4_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep3>; + }; + }; + }; + -+ /* DS90UB964 @ 0x3a */ -+ ti964-ti9x3@0 { -+ compatible = "ti,ti964-ti9x3"; ++ /* DS90UB9x4 @ 0x3a */ ++ ti9x4@0 { ++ compatible = "ti,ti9x4"; + reg = <0x3a>; + ti,sensor_delay = <350>; + ti,links = <4>; @@ -850,60 +848,29 @@ index 0000000..fe07e22 + ti,cable-mode = "coax"; + + port@0 { -+ ti964_des0ep0: endpoint@0 { ++ ti9x4_des0ep0: endpoint@0 { + ti9x3-addr = <0x0c>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in0>; + }; -+ ti964_des0ep1: endpoint@1 { ++ ti9x4_des0ep1: endpoint@1 { + ti9x3-addr = <0x0d>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in1>; + }; -+ ti964_des0ep2: endpoint@2 { ++ ti9x4_des0ep2: endpoint@2 { + ti9x3-addr = <0x0e>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in2>; + }; -+ ti964_des0ep3: endpoint@3 { ++ ti9x4_des0ep3: endpoint@3 { + ti9x3-addr = <0x0f>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in3>; + }; + }; + port@1 { -+ ti964_csi0ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB954 @ 0x38 */ -+ ti954-ti9x3@0 { -+ compatible = "ti,ti954-ti9x3"; -+ reg = <0x38>; -+ /* gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; */ -+ ti,sensor_delay = <350>; -+ ti,links = <2>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "coax"; -+ -+ port@0 { -+ ti954_des0ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ ti954_des0ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ }; -+ port@1 { -+ ti954_csi0ep0: endpoint { ++ ti9x4_csi0ep0: endpoint { + csi-rate = <1450>; + remote-endpoint = <&csi2_40_ep>; + }; @@ -973,11 +940,8 @@ index 0000000..fe07e22 + ov106xx_max9286_des1ep0: endpoint@0 { + remote-endpoint = <&max9286_des1ep0>; + }; -+ ov106xx_ti964_des1ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep0>; -+ }; -+ ov106xx_ti954_des1ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep0>; ++ ov106xx_ti9x4_des1ep0: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep0>; + }; + }; + }; @@ -997,11 +961,8 @@ index 0000000..fe07e22 + ov106xx_max9286_des1ep1: endpoint@0 { + remote-endpoint = <&max9286_des1ep1>; + }; -+ ov106xx_ti964_des1ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep1>; -+ }; -+ ov106xx_ti954_des1ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep1>; ++ ov106xx_ti9x4_des1ep1: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep1>; + }; + }; + }; @@ -1021,8 +982,8 @@ index 0000000..fe07e22 + ov106xx_max9286_des1ep2: endpoint@0 { + remote-endpoint = <&max9286_des1ep2>; + }; -+ ov106xx_ti964_des1ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep2>; ++ ov106xx_ti9x4_des1ep2: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep2>; + }; + }; + }; @@ -1042,15 +1003,15 @@ index 0000000..fe07e22 + ov106xx_max9286_des1ep3: endpoint@0 { + remote-endpoint = <&max9286_des1ep3>; + }; -+ ov106xx_ti964_des1ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep3>; ++ ov106xx_ti9x4_des1ep3: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep3>; + }; + }; + }; + -+ /* DS90UB964 @ 0x3a */ -+ ti964-ti9x3@1 { -+ compatible = "ti,ti964-ti9x3"; ++ /* DS90UB9x4 @ 0x3a */ ++ ti9x4@1 { ++ compatible = "ti,ti9x4"; + reg = <0x3a>; + ti,sensor_delay = <350>; + ti,links = <4>; @@ -1059,60 +1020,29 @@ index 0000000..fe07e22 + ti,cable-mode = "coax"; + + port@0 { -+ ti964_des1ep0: endpoint@0 { ++ ti9x4_des1ep0: endpoint@0 { + ti9x3-addr = <0x0c>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in4>; + }; -+ ti964_des1ep1: endpoint@1 { ++ ti9x4_des1ep1: endpoint@1 { + ti9x3-addr = <0x0d>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in5>; + }; -+ ti964_des1ep2: endpoint@2 { ++ ti9x4_des1ep2: endpoint@2 { + ti9x3-addr = <0x0e>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in6>; + }; -+ ti964_des1ep3: endpoint@3 { ++ ti9x4_des1ep3: endpoint@3 { + ti9x3-addr = <0x0f>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in7>; + }; + }; + port@1 { -+ ti964_csi2ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB954 @ 0x38 */ -+ ti954-ti9x3@1 { -+ compatible = "ti,ti954-ti9x3"; -+ reg = <0x38>; -+ /* gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>; */ -+ ti,sensor_delay = <350>; -+ ti,links = <2>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "coax"; -+ -+ port@0 { -+ ti954_des1ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ ti954_des1ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ }; -+ port@1 { -+ ti954_csi2ep0: endpoint { ++ ti9x4_csi2ep0: endpoint { + csi-rate = <1450>; + remote-endpoint = <&csi2_41_ep>; + }; @@ -1474,11 +1404,8 @@ index 0000000..fe07e22 + vin0_max9286_des0ep0: endpoint@0 { + remote-endpoint = <&max9286_des0ep0>; + }; -+ vin0_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; -+ }; -+ vin0_ti954_des0ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep0>; ++ vin0_ti9x4_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep0>; + }; + }; + }; @@ -1508,11 +1435,8 @@ index 0000000..fe07e22 + vin1_max9286_des0ep1: endpoint@0 { + remote-endpoint = <&max9286_des0ep1>; + }; -+ vin1_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; -+ }; -+ vin1_ti954_des0ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep1>; ++ vin1_ti9x4_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep1>; + }; + }; + }; @@ -1542,8 +1466,8 @@ index 0000000..fe07e22 + vin2_max9286_des0ep2: endpoint@0 { + remote-endpoint = <&max9286_des0ep2>; + }; -+ vin2_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; ++ vin2_ti9x4_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep2>; + }; + }; + }; @@ -1573,8 +1497,8 @@ index 0000000..fe07e22 + vin3_max9286_des0ep3: endpoint@0 { + remote-endpoint = <&max9286_des0ep3>; + }; -+ vin3_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; ++ vin3_ti9x4_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep3>; + }; + }; + }; @@ -1604,11 +1528,8 @@ index 0000000..fe07e22 + vin4_max9286_des1ep0: endpoint@0 { + remote-endpoint = <&max9286_des1ep0>; + }; -+ vin4_ti964_des1ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep0>; -+ }; -+ vin4_ti954_des1ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep0>; ++ vin4_ti9x4_des1ep0: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep0>; + }; + }; + }; @@ -1638,11 +1559,8 @@ index 0000000..fe07e22 + vin5_max9286_des1ep1: endpoint@0 { + remote-endpoint = <&max9286_des1ep1>; + }; -+ vin5_ti964_des1ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep1>; -+ }; -+ vin5_ti954_des1ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep1>; ++ vin5_ti9x4_des1ep1: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep1>; + }; + }; + }; @@ -1672,8 +1590,8 @@ index 0000000..fe07e22 + vin6_max9286_des1ep2: endpoint@0 { + remote-endpoint = <&max9286_des1ep2>; + }; -+ vin6_ti964_des1ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep2>; ++ vin6_ti9x4_des1ep2: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep2>; + }; + }; + }; @@ -1703,8 +1621,8 @@ index 0000000..fe07e22 + vin7_max9286_des1ep3: endpoint@0 { + remote-endpoint = <&max9286_des1ep3>; + }; -+ vin7_ti964_des1ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep3>; ++ vin7_ti9x4_des1ep3: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep3>; + }; + }; + }; @@ -2335,10 +2253,10 @@ index 0000000..ac6a12b +}; diff --git a/arch/arm64/boot/dts/renesas/legacy/r8a7795-h3ulcb-kf-v0.dts b/arch/arm64/boot/dts/renesas/legacy/r8a7795-h3ulcb-kf-v0.dts new file mode 100644 -index 0000000..c19bc58 +index 0000000..dd1aadc --- /dev/null +++ b/arch/arm64/boot/dts/renesas/legacy/r8a7795-h3ulcb-kf-v0.dts -@@ -0,0 +1,1724 @@ +@@ -0,0 +1,1638 @@ +/* + * Device Tree Source for the H3ULCB Kingfisher V0 board on r8a7795 + * @@ -2927,11 +2845,8 @@ index 0000000..c19bc58 + ov106xx_max9286_des0ep0: endpoint@0 { + remote-endpoint = <&max9286_des0ep0>; + }; -+ ov106xx_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; -+ }; -+ ov106xx_ti954_des0ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep0>; ++ ov106xx_ti9x4_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep0>; + }; + }; + }; @@ -2951,11 +2866,8 @@ index 0000000..c19bc58 + ov106xx_max9286_des0ep1: endpoint@0 { + remote-endpoint = <&max9286_des0ep1>; + }; -+ ov106xx_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; -+ }; -+ ov106xx_ti954_des0ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep1>; ++ ov106xx_ti9x4_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep1>; + }; + }; + }; @@ -2975,8 +2887,8 @@ index 0000000..c19bc58 + ov106xx_max9286_des0ep2: endpoint@0 { + remote-endpoint = <&max9286_des0ep2>; + }; -+ ov106xx_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; ++ ov106xx_ti9x4_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep2>; + }; + }; + }; @@ -2996,15 +2908,15 @@ index 0000000..c19bc58 + ov106xx_max9286_des0ep3: endpoint@0 { + remote-endpoint = <&max9286_des0ep3>; + }; -+ ov106xx_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; ++ ov106xx_ti9x4_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep3>; + }; + }; + }; + -+ /* DS90UB964 @ 0x3a */ -+ ti964-ti9x3@0 { -+ compatible = "ti,ti964-ti9x3"; ++ /* DS90UB9x4 @ 0x3a */ ++ ti9x4@0 { ++ compatible = "ti,ti9x4"; + reg = <0x3a>; + ti,sensor_delay = <350>; + ti,links = <4>; @@ -3013,60 +2925,29 @@ index 0000000..c19bc58 + ti,cable-mode = "coax"; + + port@0 { -+ ti964_des0ep0: endpoint@0 { ++ ti9x4_des0ep0: endpoint@0 { + ti9x3-addr = <0x0c>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in0>; + }; -+ ti964_des0ep1: endpoint@1 { ++ ti9x4_des0ep1: endpoint@1 { + ti9x3-addr = <0x0d>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in1>; + }; -+ ti964_des0ep2: endpoint@2 { ++ ti9x4_des0ep2: endpoint@2 { + ti9x3-addr = <0x0e>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in2>; + }; -+ ti964_des0ep3: endpoint@3 { ++ ti9x4_des0ep3: endpoint@3 { + ti9x3-addr = <0x0f>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in3>; + }; + }; + port@1 { -+ ti964_csi0ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB954 @ 0x38 */ -+ ti954-ti9x3@0 { -+ compatible = "ti,ti954-ti9x3"; -+ reg = <0x38>; -+ /* gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; */ -+ ti,sensor_delay = <350>; -+ ti,links = <2>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "coax"; -+ -+ port@0 { -+ ti954_des0ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ ti954_des0ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ }; -+ port@1 { -+ ti954_csi0ep0: endpoint { ++ ti9x4_csi0ep0: endpoint { + csi-rate = <1450>; + remote-endpoint = <&csi2_40_ep>; + }; @@ -3136,11 +3017,8 @@ index 0000000..c19bc58 + ov106xx_max9286_des1ep0: endpoint@0 { + remote-endpoint = <&max9286_des1ep0>; + }; -+ ov106xx_ti964_des1ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep0>; -+ }; -+ ov106xx_ti954_des1ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep0>; ++ ov106xx_ti9x4_des1ep0: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep0>; + }; + }; + }; @@ -3160,11 +3038,8 @@ index 0000000..c19bc58 + ov106xx_max9286_des1ep1: endpoint@0 { + remote-endpoint = <&max9286_des1ep1>; + }; -+ ov106xx_ti964_des1ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep1>; -+ }; -+ ov106xx_ti954_des1ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep1>; ++ ov106xx_ti9x4_des1ep1: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep1>; + }; + }; + }; @@ -3184,8 +3059,8 @@ index 0000000..c19bc58 + ov106xx_max9286_des1ep2: endpoint@0 { + remote-endpoint = <&max9286_des1ep2>; + }; -+ ov106xx_ti964_des1ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep2>; ++ ov106xx_ti9x4_des1ep2: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep2>; + }; + }; + }; @@ -3205,15 +3080,15 @@ index 0000000..c19bc58 + ov106xx_max9286_des1ep3: endpoint@0 { + remote-endpoint = <&max9286_des1ep3>; + }; -+ ov106xx_ti964_des1ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep3>; ++ ov106xx_ti9x4_des1ep3: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep3>; + }; + }; + }; + -+ /* DS90UB964 @ 0x3a */ -+ ti964-ti9x3@1 { -+ compatible = "ti,ti964-ti9x3"; ++ /* DS90UB9x4 @ 0x3a */ ++ ti9x4@1 { ++ compatible = "ti,ti9x4"; + reg = <0x3a>; + ti,sensor_delay = <350>; + ti,links = <4>; @@ -3222,60 +3097,29 @@ index 0000000..c19bc58 + ti,cable-mode = "coax"; + + port@0 { -+ ti964_des1ep0: endpoint@0 { ++ ti9x4_des1ep0: endpoint@0 { + ti9x3-addr = <0x0c>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in4>; + }; -+ ti964_des1ep1: endpoint@1 { ++ ti9x4_des1ep1: endpoint@1 { + ti9x3-addr = <0x0d>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in5>; + }; -+ ti964_des1ep2: endpoint@2 { ++ ti9x4_des1ep2: endpoint@2 { + ti9x3-addr = <0x0e>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in6>; + }; -+ ti964_des1ep3: endpoint@3 { ++ ti9x4_des1ep3: endpoint@3 { + ti9x3-addr = <0x0f>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in7>; + }; + }; + port@1 { -+ ti964_csi2ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB954 @ 0x38 */ -+ ti954-ti9x3@1 { -+ compatible = "ti,ti954-ti9x3"; -+ reg = <0x38>; -+ /* gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>; */ -+ ti,sensor_delay = <350>; -+ ti,links = <2>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "coax"; -+ -+ port@0 { -+ ti954_des1ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ ti954_des1ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ }; -+ port@1 { -+ ti954_csi2ep0: endpoint { ++ ti9x4_csi2ep0: endpoint { + csi-rate = <1450>; + remote-endpoint = <&csi2_41_ep>; + }; @@ -3644,11 +3488,8 @@ index 0000000..c19bc58 + vin0_max9286_des0ep0: endpoint@0 { + remote-endpoint = <&max9286_des0ep0>; + }; -+ vin0_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; -+ }; -+ vin0_ti954_des0ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep0>; ++ vin0_ti9x4_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep0>; + }; + }; + }; @@ -3678,11 +3519,8 @@ index 0000000..c19bc58 + vin1_max9286_des0ep1: endpoint@0 { + remote-endpoint = <&max9286_des0ep1>; + }; -+ vin1_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; -+ }; -+ vin1_ti954_des0ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep1>; ++ vin1_ti9x4_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep1>; + }; + }; + }; @@ -3712,8 +3550,8 @@ index 0000000..c19bc58 + vin2_max9286_des0ep2: endpoint@0 { + remote-endpoint = <&max9286_des0ep2>; + }; -+ vin2_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; ++ vin2_ti9x4_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep2>; + }; + }; + }; @@ -3743,8 +3581,8 @@ index 0000000..c19bc58 + vin3_max9286_des0ep3: endpoint@0 { + remote-endpoint = <&max9286_des0ep3>; + }; -+ vin3_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; ++ vin3_ti9x4_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep3>; + }; + }; + }; @@ -3774,11 +3612,8 @@ index 0000000..c19bc58 + vin4_max9286_des1ep0: endpoint@0 { + remote-endpoint = <&max9286_des1ep0>; + }; -+ vin4_ti964_des1ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep0>; -+ }; -+ vin4_ti954_des1ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep0>; ++ vin4_ti9x4_des1ep0: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep0>; + }; + }; + }; @@ -3808,11 +3643,8 @@ index 0000000..c19bc58 + vin5_max9286_des1ep1: endpoint@0 { + remote-endpoint = <&max9286_des1ep1>; + }; -+ vin5_ti964_des1ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep1>; -+ }; -+ vin5_ti954_des1ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep1>; ++ vin5_ti9x4_des1ep1: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep1>; + }; + }; + }; @@ -3842,8 +3674,8 @@ index 0000000..c19bc58 + vin6_max9286_des1ep2: endpoint@0 { + remote-endpoint = <&max9286_des1ep2>; + }; -+ vin6_ti964_des1ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep2>; ++ vin6_ti9x4_des1ep2: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep2>; + }; + }; + }; @@ -3873,8 +3705,8 @@ index 0000000..c19bc58 + vin7_max9286_des1ep3: endpoint@0 { + remote-endpoint = <&max9286_des1ep3>; + }; -+ vin7_ti964_des1ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep3>; ++ vin7_ti9x4_des1ep3: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep3>; + }; + }; + }; @@ -4536,10 +4368,10 @@ index 0000000..14b6f52 +}; diff --git a/arch/arm64/boot/dts/renesas/legacy/r8a7796-m3ulcb-kf-v0.dts b/arch/arm64/boot/dts/renesas/legacy/r8a7796-m3ulcb-kf-v0.dts new file mode 100644 -index 0000000..8e7de0f +index 0000000..b17a42e --- /dev/null +++ b/arch/arm64/boot/dts/renesas/legacy/r8a7796-m3ulcb-kf-v0.dts -@@ -0,0 +1,1214 @@ +@@ -0,0 +1,1171 @@ +/* + * Device Tree Source for the M3ULCB Kingfisher V0 board on r8a7796 + * @@ -5128,11 +4960,8 @@ index 0000000..8e7de0f + ov106xx_max9286_des0ep0: endpoint@0 { + remote-endpoint = <&max9286_des0ep0>; + }; -+ ov106xx_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; -+ }; -+ ov106xx_ti954_des0ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep0>; ++ ov106xx_ti9x4_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep0>; + }; + }; + }; @@ -5152,11 +4981,8 @@ index 0000000..8e7de0f + ov106xx_max9286_des0ep1: endpoint@0 { + remote-endpoint = <&max9286_des0ep1>; + }; -+ ov106xx_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; -+ }; -+ ov106xx_ti954_des0ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep1>; ++ ov106xx_ti9x4_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep1>; + }; + }; + }; @@ -5176,8 +5002,8 @@ index 0000000..8e7de0f + ov106xx_max9286_des0ep2: endpoint@0 { + remote-endpoint = <&max9286_des0ep2>; + }; -+ ov106xx_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; ++ ov106xx_ti9x4_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep2>; + }; + }; + }; @@ -5197,15 +5023,15 @@ index 0000000..8e7de0f + ov106xx_max9286_des0ep3: endpoint@0 { + remote-endpoint = <&max9286_des0ep3>; + }; -+ ov106xx_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; ++ ov106xx_ti9x4_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep3>; + }; + }; + }; + -+ /* DS90UB964 @ 0x3a */ -+ ti964-ti9x3@0 { -+ compatible = "ti,ti964-ti9x3"; ++ /* DS90UB9x4 @ 0x3a */ ++ ti9x4@0 { ++ compatible = "ti,ti9x4"; + reg = <0x3a>; + ti,sensor_delay = <350>; + ti,links = <4>; @@ -5214,60 +5040,29 @@ index 0000000..8e7de0f + ti,cable-mode = "coax"; + + port@0 { -+ ti964_des0ep0: endpoint@0 { ++ ti9x4_des0ep0: endpoint@0 { + ti9x3-addr = <0x0c>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in0>; + }; -+ ti964_des0ep1: endpoint@1 { ++ ti9x4_des0ep1: endpoint@1 { + ti9x3-addr = <0x0d>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in1>; + }; -+ ti964_des0ep2: endpoint@2 { ++ ti9x4_des0ep2: endpoint@2 { + ti9x3-addr = <0x0e>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in2>; + }; -+ ti964_des0ep3: endpoint@3 { ++ ti9x4_des0ep3: endpoint@3 { + ti9x3-addr = <0x0f>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in3>; + }; + }; + port@1 { -+ ti964_csi0ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB954 @ 0x38 */ -+ ti954-ti9x3@0 { -+ compatible = "ti,ti954-ti9x3"; -+ reg = <0x38>; -+ /* gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; */ -+ ti,sensor_delay = <350>; -+ ti,links = <2>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "coax"; -+ -+ port@0 { -+ ti954_des0ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ ti954_des0ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ }; -+ port@1 { -+ ti954_csi0ep0: endpoint { ++ ti9x4_csi0ep0: endpoint { + csi-rate = <1450>; + remote-endpoint = <&csi2_40_ep>; + }; @@ -5499,11 +5294,8 @@ index 0000000..8e7de0f + vin0_max9286_des0ep0: endpoint@0 { + remote-endpoint = <&max9286_des0ep0>; + }; -+ vin0_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; -+ }; -+ vin0_ti954_des0ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep0>; ++ vin0_ti9x4_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep0>; + }; + }; + }; @@ -5533,11 +5325,8 @@ index 0000000..8e7de0f + vin1_max9286_des0ep1: endpoint@0 { + remote-endpoint = <&max9286_des0ep1>; + }; -+ vin1_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; -+ }; -+ vin1_ti954_des0ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep1>; ++ vin1_ti9x4_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep1>; + }; + }; + }; @@ -5567,8 +5356,8 @@ index 0000000..8e7de0f + vin2_max9286_des0ep2: endpoint@0 { + remote-endpoint = <&max9286_des0ep2>; + }; -+ vin2_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; ++ vin2_ti9x4_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep2>; + }; + }; + }; @@ -5598,8 +5387,8 @@ index 0000000..8e7de0f + vin3_max9286_des0ep3: endpoint@0 { + remote-endpoint = <&max9286_des0ep3>; + }; -+ vin3_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; ++ vin3_ti9x4_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep3>; + }; + }; + }; @@ -11023,10 +10812,10 @@ index 0000000..ce7a88e +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7797-v3msk-kf.dts b/arch/arm64/boot/dts/renesas/r8a7797-v3msk-kf.dts new file mode 100644 -index 0000000..9158c84 +index 0000000..c61b613 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7797-v3msk-kf.dts -@@ -0,0 +1,575 @@ +@@ -0,0 +1,533 @@ +/* + * Device Tree Source for the V3MSK Kingfisher board on r8a7797 + * @@ -11132,11 +10921,8 @@ index 0000000..9158c84 + ov106xx_max9286_des0ep0: endpoint@0 { + remote-endpoint = <&max9286_des0ep0>; + }; -+ ov106xx_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; -+ }; -+ ov106xx_ti954_des0ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep0>; ++ ov106xx_ti9x4_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep0>; + }; + }; + }; @@ -11156,11 +10942,8 @@ index 0000000..9158c84 + ov106xx_max9286_des0ep1: endpoint@0 { + remote-endpoint = <&max9286_des0ep1>; + }; -+ ov106xx_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; -+ }; -+ ov106xx_ti954_des0ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep1>; ++ ov106xx_ti9x4_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep1>; + }; + }; + }; @@ -11180,8 +10963,8 @@ index 0000000..9158c84 + ov106xx_max9286_des0ep2: endpoint@0 { + remote-endpoint = <&max9286_des0ep2>; + }; -+ ov106xx_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; ++ ov106xx_ti9x4_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep2>; + }; + }; + }; @@ -11201,15 +10984,15 @@ index 0000000..9158c84 + ov106xx_max9286_des0ep3: endpoint@0 { + remote-endpoint = <&max9286_des0ep3>; + }; -+ ov106xx_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; ++ ov106xx_ti9x4_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep3>; + }; + }; + }; + -+ /* DS90UB964 @ 0x3a */ -+ ti964-ti9x3@0 { -+ compatible = "ti,ti964-ti9x3"; ++ /* DS90UB9x4 @ 0x3a */ ++ ti9x4@0 { ++ compatible = "ti,ti9x4"; + reg = <0x3a>; + ti,links = <4>; + ti,lanes = <4>; @@ -11217,59 +11000,29 @@ index 0000000..9158c84 + ti,cable-mode = "coax"; + + port@0 { -+ ti964_des0ep0: endpoint@0 { ++ ti9x4_des0ep0: endpoint@0 { + ti9x3-addr = <0x0c>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in0>; + }; -+ ti964_des0ep1: endpoint@1 { ++ ti9x4_des0ep1: endpoint@1 { + ti9x3-addr = <0x0d>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in1>; + }; -+ ti964_des0ep2: endpoint@2 { ++ ti9x4_des0ep2: endpoint@2 { + ti9x3-addr = <0x0e>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in2>; + }; -+ ti964_des0ep3: endpoint@3 { ++ ti9x4_des0ep3: endpoint@3 { + ti9x3-addr = <0x0f>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in3>; + }; + }; + port@1 { -+ ti964_csi0ep0: endpoint { -+ csi-rate = <800>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB954 @ 0x38 */ -+ ti954-ti9x3@0 { -+ compatible = "ti,ti954-ti9x3"; -+ reg = <0x38>; -+ /* gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; */ -+ ti,links = <2>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "coax"; -+ -+ port@0 { -+ ti954_des0ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ ti954_des0ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ }; -+ port@1 { -+ ti954_csi0ep0: endpoint { ++ ti9x4_csi0ep0: endpoint { + csi-rate = <800>; + remote-endpoint = <&csi2_40_ep>; + }; @@ -11497,11 +11250,8 @@ index 0000000..9158c84 + vin0_max9286_des0ep0: endpoint@0 { + remote-endpoint = <&max9286_des0ep0>; + }; -+ vin0_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; -+ }; -+ vin0_ti954_des0ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep0>; ++ vin0_ti9x4_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep0>; + }; + }; + }; @@ -11531,11 +11281,8 @@ index 0000000..9158c84 + vin1_max9286_des0ep1: endpoint@0 { + remote-endpoint = <&max9286_des0ep1>; + }; -+ vin1_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; -+ }; -+ vin1_ti954_des0ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep1>; ++ vin1_ti9x4_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep1>; + }; + }; + }; @@ -11565,8 +11312,8 @@ index 0000000..9158c84 + vin2_max9286_des0ep2: endpoint@0 { + remote-endpoint = <&max9286_des0ep2>; + }; -+ vin2_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; ++ vin2_ti9x4_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep2>; + }; + }; + }; @@ -11596,15 +11343,15 @@ index 0000000..9158c84 + vin3_max9286_des0ep3: endpoint@0 { + remote-endpoint = <&max9286_des0ep3>; + }; -+ vin3_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; ++ vin3_ti9x4_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep3>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7797-v3msk-vbm.dts b/arch/arm64/boot/dts/renesas/r8a7797-v3msk-vbm.dts new file mode 100644 -index 0000000..1cb8e95 +index 0000000..d355adb --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7797-v3msk-vbm.dts @@ -0,0 +1,548 @@ @@ -11746,8 +11493,8 @@ index 0000000..1cb8e95 + ov106xx_max9286_des0ep0: endpoint@0 { + remote-endpoint = <&max9286_des0ep0>; + }; -+ ov106xx_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; ++ ov106xx_ti9x4_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep0>; + }; + }; + }; @@ -11767,8 +11514,8 @@ index 0000000..1cb8e95 + ov106xx_max9286_des0ep1: endpoint@0 { + remote-endpoint = <&max9286_des0ep1>; + }; -+ ov106xx_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; ++ ov106xx_ti9x4_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep1>; + }; + }; + }; @@ -11788,8 +11535,8 @@ index 0000000..1cb8e95 + ov106xx_max9286_des0ep2: endpoint@0 { + remote-endpoint = <&max9286_des0ep2>; + }; -+ ov106xx_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; ++ ov106xx_ti9x4_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep2>; + }; + }; + }; @@ -11809,8 +11556,8 @@ index 0000000..1cb8e95 + ov106xx_max9286_des0ep3: endpoint@0 { + remote-endpoint = <&max9286_des0ep3>; + }; -+ ov106xx_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; ++ ov106xx_ti9x4_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep3>; + }; + }; + }; @@ -11858,8 +11605,8 @@ index 0000000..1cb8e95 + }; + }; + -+ ti964-ti9x3@0 { -+ compatible = "ti,ti964-ti9x3"; ++ ti9x4@0 { ++ compatible = "ti,ti9x4"; + reg = <0x3a>; + ti,links = <4>; + ti,lanes = <4>; @@ -11871,29 +11618,29 @@ index 0000000..1cb8e95 + POC3-supply = <&pwr3>; + + port@0 { -+ ti964_des0ep0: endpoint@0 { ++ ti9x4_des0ep0: endpoint@0 { + ti9x3-addr = <0x0c>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in0>; + }; -+ ti964_des0ep1: endpoint@1 { ++ ti9x4_des0ep1: endpoint@1 { + ti9x3-addr = <0x0d>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in1>; + }; -+ ti964_des0ep2: endpoint@2 { ++ ti9x4_des0ep2: endpoint@2 { + ti9x3-addr = <0x0e>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in2>; + }; -+ ti964_des0ep3: endpoint@3 { ++ ti9x4_des0ep3: endpoint@3 { + ti9x3-addr = <0x0f>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in3>; + }; + }; + port@1 { -+ ti964_csi0ep0: endpoint { ++ ti9x4_csi0ep0: endpoint { + csi-rate = <700>; + remote-endpoint = <&csi2_40_ep>; + }; @@ -12057,8 +11804,8 @@ index 0000000..1cb8e95 + vin0_max9286_des0ep0: endpoint@0 { + remote-endpoint = <&max9286_des0ep0>; + }; -+ vin0_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; ++ vin0_ti9x4_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep0>; + }; + }; + }; @@ -12088,8 +11835,8 @@ index 0000000..1cb8e95 + vin1_max9286_des0ep1: endpoint@0 { + remote-endpoint = <&max9286_des0ep1>; + }; -+ vin1_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; ++ vin1_ti9x4_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep1>; + }; + }; + }; @@ -12119,8 +11866,8 @@ index 0000000..1cb8e95 + vin2_max9286_des0ep2: endpoint@0 { + remote-endpoint = <&max9286_des0ep2>; + }; -+ vin2_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; ++ vin2_ti9x4_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep2>; + }; + }; + }; @@ -12150,8 +11897,8 @@ index 0000000..1cb8e95 + vin3_max9286_des0ep3: endpoint@0 { + remote-endpoint = <&max9286_des0ep3>; + }; -+ vin3_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; ++ vin3_ti9x4_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep3>; + }; + }; + }; @@ -12779,6 +12526,436 @@ index 0000000..91d10c5 + non-removable; + status = "okay"; +}; +diff --git a/arch/arm64/boot/dts/renesas/r8a7797-v3mzf.dts b/arch/arm64/boot/dts/renesas/r8a7797-v3mzf.dts +new file mode 100644 +index 0000000..7926d2e +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7797-v3mzf.dts +@@ -0,0 +1,424 @@ ++/* ++ * Device Tree Source for the V3MZF board ++ * ++ * Copyright (C) 2018 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++/dts-v1/; ++#include "r8a7797.dtsi" ++#include <dt-bindings/gpio/gpio.h> ++ ++/ { ++ model = "Renesas V3MZF board based on r8a7797"; ++ compatible = "renesas,v3mzf", "renesas,r8a7797"; ++ ++ aliases { ++ serial0 = &scif0; ++ ethernet0 = &avb; ++ }; ++ ++ chosen { ++ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ memory@48000000 { ++ device_type = "memory"; ++ /* first 128MB is reserved for secure area. */ ++ reg = <0x0 0x48000000 0x0 0x38000000>; ++ }; ++ ++ reserved-memory { ++ #address-cells = <2>; ++ #size-cells = <2>; ++ ranges; ++ ++ /* device specific region for Lossy Decompression */ ++ lossy_decompress: linux,lossy_decompress { ++ no-map; ++ reg = <0x00000000 0x6c000000 0x0 0x03000000>; ++ }; ++ ++ /* global autoconfigured region for contiguous allocations */ ++ linux,cma { ++ compatible = "shared-dma-pool"; ++ reusable; ++ reg = <0x00000000 0x6f000000 0x0 0x11000000>; ++ linux,cma-default; ++ }; ++ }; ++ ++ mmngr { ++ compatible = "renesas,mmngr"; ++ memory-region = <&lossy_decompress>; ++ }; ++ ++ mmngrbuf { ++ compatible = "renesas,mmngrbuf"; ++ }; ++ ++ vspm_if { ++ compatible = "renesas,vspm_if"; ++ }; ++ ++ lvds-encoder { ++ compatible = "thine,thc63lvdm83d"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ lvds_enc_in: endpoint { ++ remote-endpoint = <&du_out_lvds0>; ++ }; ++ }; ++ port@1 { ++ reg = <1>; ++ lvds_enc_out: endpoint { ++ remote-endpoint = <&lvds_in>; ++ }; ++ }; ++ }; ++ }; ++ ++ lvds { ++ compatible = "lvds-connector"; ++ ++ width-mm = <210>; ++ height-mm = <158>; ++ ++ panel-timing { ++ clock-frequency = <65000000>; ++ hactive = <1280>; ++ vactive = <800>; ++ hsync-len = <40>; ++ hfront-porch = <80>; ++ hback-porch = <40>; ++ vfront-porch = <14>; ++ vback-porch = <14>; ++ vsync-len = <4>; ++ }; ++ ++ port { ++ lvds_in: endpoint { ++ remote-endpoint = <&lvds_enc_out>; ++ }; ++ }; ++ }; ++ ++ dclkin_p0: clock-out0 { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <148500000>; ++ }; ++ ++ msiof_ref_clk: msiof-ref-clock { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <66666666>; ++ }; ++}; ++ ++&avb { ++ pinctrl-0 = <&avb_pins>; ++ pinctrl-names = "default"; ++ renesas,no-ether-link; ++ phy-handle = <&phy0>; ++ status = "okay"; ++ phy-int-gpio = <&gpio1 17 GPIO_ACTIVE_LOW>; ++ ++ phy0: ethernet-phy@0 { ++ rxc-skew-ps = <1500>; ++ rxdv-skew-ps = <420>; /* default */ ++ rxd0-skew-ps = <420>; /* default */ ++ rxd1-skew-ps = <420>; /* default */ ++ rxd2-skew-ps = <420>; /* default */ ++ rxd3-skew-ps = <420>; /* default */ ++ txc-skew-ps = <900>; /* default */ ++ txen-skew-ps = <420>; /* default */ ++ txd0-skew-ps = <420>; /* default */ ++ txd1-skew-ps = <420>; /* default */ ++ txd2-skew-ps = <420>; /* default */ ++ txd3-skew-ps = <420>; /* default */ ++ reg = <0>; ++ interrupt-parent = <&gpio1>; ++ interrupts = <17 IRQ_TYPE_LEVEL_LOW>; ++ max-speed = <1000>; ++ }; ++}; ++ ++&canfd { ++ pinctrl-0 = <&canfd0_pins &canfd1_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ ++ channel0 { ++ status = "okay"; ++ }; ++ ++ channel1 { ++ status = "okay"; ++ }; ++}; ++ ++&csi2_40 { ++ status = "okay"; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "raw8"; ++ receive,vc = <0>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_40_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ csi-rate = <300>; ++ }; ++ }; ++}; ++ ++&du { ++ status = "okay"; ++ ++ ports { ++ port@0 { ++ endpoint { ++ remote-endpoint = <&lvds_in>; ++ }; ++ }; ++ }; ++}; ++ ++&extal_clk { ++ clock-frequency = <16666666>; ++}; ++ ++&extalr_clk { ++ clock-frequency = <32768>; ++}; ++ ++&gpio1 { ++ pdb_ser_enable { ++ gpio-hog; ++ gpios = <26 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "PDB_SER_Enable"; ++ }; ++ ++ lvds_sw_sel { ++ gpio-hog; ++ gpios = <27 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "LVDS_SW_SEL"; ++ }; ++}; ++ ++&gpio2 { ++ can0_inh_v3m { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "CAN0_INH_V3M"; ++ }; ++ ++ can1_inh_v3m { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "CAN1_INH_V3M"; ++ }; ++}; ++ ++&gpio3 { ++ pdb_des_enable { ++ gpio-hog; ++ gpios = <0 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "PDB_DES_Enable"; ++ }; ++}; ++ ++&i2c0 { ++ pinctrl-0 = <&i2c0_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++ clock-frequency = <400000>; ++}; ++ ++&i2c3 { ++ pinctrl-0 = <&i2c3_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++ clock-frequency = <400000>; ++ ++ ov106xx@0 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x60>; ++ ++ port@0 { ++ ov106xx_in0: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin0ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_ti9x4_des0ep0: endpoint@0 { ++ remote-endpoint = <&ti9x4_des0ep0>; ++ }; ++ }; ++ }; ++ ++ ti9x4@30 { ++ compatible = "ti,ti9x4"; ++ reg = <0x30>; ++ ti,links = <1>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,dvp_bus = <0>; ++ ti,ser_id = <0x30>; ++ ++ port@0 { ++ ti9x4_des0ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ }; ++ port@1 { ++ ti9x4_csi0ep0: endpoint { ++ csi-rate = <800>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++}; ++ ++&msiof2 { ++ pinctrl-0 = <&msiof2_pins>; ++ pinctrl-names = "default"; ++ cs-gpios = <&gpio2 4 0>; ++ ++ status = "okay"; ++ spidev@0 { ++ compatible = "renesas,sh-msiof"; ++ reg = <0>; ++ spi-max-frequency = <66666666>; ++ }; ++}; ++ ++&msiof3 { ++ pinctrl-0 = <&msiof3_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++ slave; ++}; ++ ++&pfc { ++ pinctrl-0 = <&scif_clk_pins>; ++ pinctrl-names = "default"; ++ ++ avb_pins: avb { ++ groups = "avb0_mdc"; ++ function = "avb0"; ++ }; ++ ++ canfd0_pins: canfd0 { ++ groups = "canfd0_data_a"; ++ function = "canfd0"; ++ }; ++ ++ canfd1_pins: canfd1 { ++ groups = "canfd1_data"; ++ function = "canfd1"; ++ }; ++ ++ i2c0_pins: i2c0 { ++ groups = "i2c0"; ++ function = "i2c0"; ++ }; ++ ++ i2c3_pins: i2c3 { ++ groups = "i2c3"; ++ function = "i2c3"; ++ }; ++ ++ msiof2_pins: msiof2 { ++ groups = "msiof2_clk", "msiof2_txd", "msiof2_rxd"; ++ function = "msiof2"; ++ }; ++ ++ msiof3_pins: msiof3 { ++ groups = "msiof3_clk", "msiof3_txd", "msiof3_rxd", "msiof3_sync"; ++ function = "msiof3"; ++ }; ++ ++ scif0_pins: scif0 { ++ groups = "scif0_data"; ++ function = "scif0"; ++ }; ++ ++ scif_clk_pins: scif_clk { ++ groups = "scif_clk_b"; ++ function = "scif_clk"; ++ }; ++}; ++ ++&scif0 { ++ pinctrl-0 = <&scif0_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++}; ++ ++&scif_clk { ++ clock-frequency = <14745600>; ++ status = "okay"; ++}; ++ ++&vin0 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin0ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ }; ++ port@1 { ++ csi0ep0: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin0_ti9x4_des0ep0: endpoint@0 { ++ remote-endpoint = <&ti9x4_des0ep0>; ++ }; ++ }; ++ }; ++}; ++ ++&wdt0 { ++ status = "okay"; ++}; diff --git a/arch/arm64/boot/dts/renesas/r8a7798-condor.dts b/arch/arm64/boot/dts/renesas/r8a7798-condor.dts new file mode 100644 index 0000000..cdd9844 @@ -13750,10 +13927,10 @@ index 0000000..cdd9844 +}; diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-cn11.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-cn11.dtsi new file mode 100644 -index 0000000..b469ca6 +index 0000000..095a503 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/ulcb-kf-cn11.dtsi -@@ -0,0 +1,545 @@ +@@ -0,0 +1,498 @@ +/* + * Device Tree Source for the H3ULCB Kingfisher board: + * this adding conflicting resource on VIN4/VIN5/VIN6/VIN7 for CN11 @@ -13827,11 +14004,8 @@ index 0000000..b469ca6 + ov106xx_max9286_des1ep0: endpoint@0 { + remote-endpoint = <&max9286_des1ep0>; + }; -+ ov106xx_ti964_des1ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep0>; -+ }; -+ ov106xx_ti954_des1ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep0>; ++ ov106xx_ti9x4_des1ep0: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep0>; + }; + }; + }; @@ -13851,11 +14025,8 @@ index 0000000..b469ca6 + ov106xx_max9286_des1ep1: endpoint@0 { + remote-endpoint = <&max9286_des1ep1>; + }; -+ ov106xx_ti964_des1ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep1>; -+ }; -+ ov106xx_ti954_des1ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep1>; ++ ov106xx_ti9x4_des1ep1: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep1>; + }; + }; + }; @@ -13874,8 +14045,8 @@ index 0000000..b469ca6 + ov106xx_max9286_des1ep2: endpoint@0 { + remote-endpoint = <&max9286_des1ep2>; + }; -+ ov106xx_ti964_des1ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep2>; ++ ov106xx_ti9x4_des1ep2: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep2>; + }; + }; + }; @@ -13894,15 +14065,15 @@ index 0000000..b469ca6 + ov106xx_max9286_des1ep3: endpoint@0 { + remote-endpoint = <&max9286_des1ep3>; + }; -+ ov106xx_ti964_des1ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep3>; ++ ov106xx_ti9x4_des1ep3: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep3>; + }; + }; + }; + -+ /* DS90UB964 @ 0x3a */ -+ ti964-ti9x3@1 { -+ compatible = "ti,ti964-ti9x3"; ++ /* DS90UB9x4 @ 0x3a */ ++ ti9x4@1 { ++ compatible = "ti,ti9x4"; + reg = <0x3a>; + ti,sensor_delay = <350>; + ti,links = <4>; @@ -13915,64 +14086,29 @@ index 0000000..b469ca6 + POC3-supply = <&pwr3B>; + + port@0 { -+ ti964_des1ep0: endpoint@0 { ++ ti9x4_des1ep0: endpoint@0 { + ti9x3-addr = <0x0c>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in4>; + }; -+ ti964_des1ep1: endpoint@1 { ++ ti9x4_des1ep1: endpoint@1 { + ti9x3-addr = <0x0d>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in5>; + }; -+ ti964_des1ep2: endpoint@2 { ++ ti9x4_des1ep2: endpoint@2 { + ti9x3-addr = <0x0e>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in6>; + }; -+ ti964_des1ep3: endpoint@3 { ++ ti9x4_des1ep3: endpoint@3 { + ti9x3-addr = <0x0f>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in7>; + }; + }; + port@1 { -+ ti964_csi2ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB954 @ 0x38 */ -+ ti954-ti9x3@1 { -+ compatible = "ti,ti954-ti9x3"; -+ reg = <0x38>; -+ /* gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>; */ -+ ti,sensor_delay = <350>; -+ ti,links = <2>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "coax"; -+ POC0-supply = <&pwr0B>; -+ POC1-supply = <&pwr1B>; -+ POC2-supply = <&pwr2B>; -+ POC3-supply = <&pwr3B>; -+ -+ port@0 { -+ ti954_des1ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ ti954_des1ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ }; -+ port@1 { -+ ti954_csi2ep0: endpoint { ++ ti9x4_csi2ep0: endpoint { + csi-rate = <1450>; + remote-endpoint = <&csi2_41_ep>; + }; @@ -14162,11 +14298,8 @@ index 0000000..b469ca6 + vin4_max9286_des1ep0: endpoint@0 { + remote-endpoint = <&max9286_des1ep0>; + }; -+ vin4_ti964_des1ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep0>; -+ }; -+ vin4_ti954_des1ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep0>; ++ vin4_ti9x4_des1ep0: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep0>; + }; + }; + }; @@ -14194,11 +14327,8 @@ index 0000000..b469ca6 + vin5_max9286_des1ep1: endpoint@0 { + remote-endpoint = <&max9286_des1ep1>; + }; -+ vin5_ti964_des1ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep1>; -+ }; -+ vin5_ti954_des1ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep1>; ++ vin5_ti9x4_des1ep1: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep1>; + }; + }; + }; @@ -14228,8 +14358,8 @@ index 0000000..b469ca6 + vin6_max9286_des1ep2: endpoint@0 { + remote-endpoint = <&max9286_des1ep2>; + }; -+ vin6_ti964_des1ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep2>; ++ vin6_ti9x4_des1ep2: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep2>; + }; + }; + }; @@ -14259,8 +14389,8 @@ index 0000000..b469ca6 + vin7_max9286_des1ep3: endpoint@0 { + remote-endpoint = <&max9286_des1ep3>; + }; -+ vin7_ti964_des1ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep3>; ++ vin7_ti9x4_des1ep3: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep3>; + }; + }; + }; @@ -14389,10 +14519,10 @@ index 0000000..b854216 +}; diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi new file mode 100644 -index 0000000..56194b4 +index 0000000..a33a2a0 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi -@@ -0,0 +1,1538 @@ +@@ -0,0 +1,1492 @@ +/* + * Device Tree Source for the ULCB Kingfisher board + * @@ -15208,11 +15338,8 @@ index 0000000..56194b4 + ov106xx_max9286_des0ep0: endpoint@0 { + remote-endpoint = <&max9286_des0ep0>; + }; -+ ov106xx_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; -+ }; -+ ov106xx_ti954_des0ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep0>; ++ ov106xx_ti9x4_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep0>; + }; + }; + }; @@ -15232,11 +15359,8 @@ index 0000000..56194b4 + ov106xx_max9286_des0ep1: endpoint@0 { + remote-endpoint = <&max9286_des0ep1>; + }; -+ ov106xx_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; -+ }; -+ ov106xx_ti954_des0ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep1>; ++ ov106xx_ti9x4_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep1>; + }; + }; + }; @@ -15256,8 +15380,8 @@ index 0000000..56194b4 + ov106xx_max9286_des0ep2: endpoint@0 { + remote-endpoint = <&max9286_des0ep2>; + }; -+ ov106xx_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; ++ ov106xx_ti9x4_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep2>; + }; + }; + }; @@ -15277,15 +15401,15 @@ index 0000000..56194b4 + ov106xx_max9286_des0ep3: endpoint@0 { + remote-endpoint = <&max9286_des0ep3>; + }; -+ ov106xx_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; ++ ov106xx_ti9x4_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep3>; + }; + }; + }; + -+ /* DS90UB964 @ 0x3a */ -+ ti964-ti9x3@0 { -+ compatible = "ti,ti964-ti9x3"; ++ /* DS90UB9x4 @ 0x3a */ ++ ti9x4@0 { ++ compatible = "ti,ti9x4"; + reg = <0x3a>; + ti,links = <4>; + ti,lanes = <4>; @@ -15297,63 +15421,29 @@ index 0000000..56194b4 + POC3-supply = <&pwr3A>; + + port@0 { -+ ti964_des0ep0: endpoint@0 { ++ ti9x4_des0ep0: endpoint@0 { + ti9x3-addr = <0x0c>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in0>; + }; -+ ti964_des0ep1: endpoint@1 { ++ ti9x4_des0ep1: endpoint@1 { + ti9x3-addr = <0x0d>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in1>; + }; -+ ti964_des0ep2: endpoint@2 { ++ ti9x4_des0ep2: endpoint@2 { + ti9x3-addr = <0x0e>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in2>; + }; -+ ti964_des0ep3: endpoint@3 { ++ ti9x4_des0ep3: endpoint@3 { + ti9x3-addr = <0x0f>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in3>; + }; + }; + port@1 { -+ ti964_csi0ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB954 @ 0x38 */ -+ ti954-ti9x3@0 { -+ compatible = "ti,ti954-ti9x3"; -+ reg = <0x38>; -+ /* gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; */ -+ ti,links = <2>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "coax"; -+ POC0-supply = <&pwr0A>; -+ POC1-supply = <&pwr1A>; -+ POC2-supply = <&pwr2A>; -+ POC3-supply = <&pwr3A>; -+ -+ port@0 { -+ ti954_des0ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ ti954_des0ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ }; -+ port@1 { -+ ti954_csi0ep0: endpoint { ++ ti9x4_csi0ep0: endpoint { + csi-rate = <1450>; + remote-endpoint = <&csi2_40_ep>; + }; @@ -15603,11 +15693,8 @@ index 0000000..56194b4 + vin0_max9286_des0ep0: endpoint@0 { + remote-endpoint = <&max9286_des0ep0>; + }; -+ vin0_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; -+ }; -+ vin0_ti954_des0ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep0>; ++ vin0_ti9x4_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep0>; + }; + }; + }; @@ -15637,11 +15724,8 @@ index 0000000..56194b4 + vin1_max9286_des0ep1: endpoint@0 { + remote-endpoint = <&max9286_des0ep1>; + }; -+ vin1_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; -+ }; -+ vin1_ti954_des0ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep1>; ++ vin1_ti9x4_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep1>; + }; + }; + }; @@ -15671,8 +15755,8 @@ index 0000000..56194b4 + vin2_max9286_des0ep2: endpoint@0 { + remote-endpoint = <&max9286_des0ep2>; + }; -+ vin2_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; ++ vin2_ti9x4_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep2>; + }; + }; + }; @@ -15702,8 +15786,8 @@ index 0000000..56194b4 + vin3_max9286_des0ep3: endpoint@0 { + remote-endpoint = <&max9286_des0ep3>; + }; -+ vin3_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; ++ vin3_ti9x4_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep3>; + }; + }; + }; @@ -15933,10 +16017,10 @@ index 0000000..56194b4 + diff --git a/arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi b/arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi new file mode 100644 -index 0000000..df27324 +index 0000000..778a477 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi -@@ -0,0 +1,542 @@ +@@ -0,0 +1,495 @@ +/* + * Device Tree Source for the H3ULCB Videobox board: + * this adding conflicting resource on VIN4/VIN5/VIN6/VIN7 for CN12 @@ -16009,11 +16093,8 @@ index 0000000..df27324 + ov106xx_max9286_des2ep0: endpoint@0 { + remote-endpoint = <&max9286_des2ep0>; + }; -+ ov106xx_ti964_des2ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des2ep0>; -+ }; -+ ov106xx_ti954_des2ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des2ep0>; ++ ov106xx_ti9x4_des2ep0: endpoint@1 { ++ remote-endpoint = <&ti9x4_des2ep0>; + }; + }; + }; @@ -16033,11 +16114,8 @@ index 0000000..df27324 + ov106xx_max9286_des2ep1: endpoint@0 { + remote-endpoint = <&max9286_des2ep1>; + }; -+ ov106xx_ti964_des2ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des2ep1>; -+ }; -+ ov106xx_ti954_des2ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des2ep1>; ++ ov106xx_ti9x4_des2ep1: endpoint@1 { ++ remote-endpoint = <&ti9x4_des2ep1>; + }; + }; + }; @@ -16057,8 +16135,8 @@ index 0000000..df27324 + ov106xx_max9286_des2ep2: endpoint@0 { + remote-endpoint = <&max9286_des2ep2>; + }; -+ ov106xx_ti964_des2ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des2ep2>; ++ ov106xx_ti9x4_des2ep2: endpoint@1 { ++ remote-endpoint = <&ti9x4_des2ep2>; + }; + }; + }; @@ -16078,15 +16156,15 @@ index 0000000..df27324 + ov106xx_max9286_des2ep3: endpoint@0 { + remote-endpoint = <&max9286_des2ep3>; + }; -+ ov106xx_ti964_des2ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des2ep3>; ++ ov106xx_ti9x4_des2ep3: endpoint@1 { ++ remote-endpoint = <&ti9x4_des2ep3>; + }; + }; + }; + -+ /* DS90UB964 @ 0x3a */ -+ ti964-ti9x3@2 { -+ compatible = "ti,ti964-ti9x3"; ++ /* DS90UB9x4 @ 0x3a */ ++ ti9x4@2 { ++ compatible = "ti,ti9x4"; + reg = <0x3a>; + ti,sensor_delay = <350>; + ti,links = <4>; @@ -16099,64 +16177,29 @@ index 0000000..df27324 + POC3-supply = <&pwr3C>; + + port@0 { -+ ti964_des2ep0: endpoint@0 { ++ ti9x4_des2ep0: endpoint@0 { + ti9x3-addr = <0x0c>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in8>; + }; -+ ti964_des2ep1: endpoint@1 { ++ ti9x4_des2ep1: endpoint@1 { + ti9x3-addr = <0x0d>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in9>; + }; -+ ti964_des2ep2: endpoint@2 { ++ ti9x4_des2ep2: endpoint@2 { + ti9x3-addr = <0x0e>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in10>; + }; -+ ti964_des2ep3: endpoint@3 { ++ ti9x4_des2ep3: endpoint@3 { + ti9x3-addr = <0x0f>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in11>; + }; + }; + port@1 { -+ ti964_csi1ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_20_ep>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB954 @ 0x38 */ -+ ti954-ti9x3@2 { -+ compatible = "ti,ti954-ti9x3"; -+ reg = <0x38>; -+ /* gpios = <&gpio_exp_c_5c 10 GPIO_ACTIVE_HIGH>; */ -+ ti,sensor_delay = <350>; -+ ti,links = <2>; -+ ti,lanes = <2>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "coax"; -+ POC0-supply = <&pwr0C>; -+ POC1-supply = <&pwr1C>; -+ POC2-supply = <&pwr2C>; -+ POC3-supply = <&pwr3C>; -+ -+ port@0 { -+ ti954_des2ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in8>; -+ }; -+ ti954_des2ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in9>; -+ }; -+ }; -+ port@1 { -+ ti954_csi1ep0: endpoint { ++ ti9x4_csi1ep0: endpoint { + csi-rate = <1450>; + remote-endpoint = <&csi2_20_ep>; + }; @@ -16346,11 +16389,8 @@ index 0000000..df27324 + vin4_max9286_des2ep0: endpoint@0 { + remote-endpoint = <&max9286_des2ep0>; + }; -+ vin4_ti964_des2ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des2ep0>; -+ }; -+ vin4_ti954_des2ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des2ep0>; ++ vin4_ti9x4_des2ep0: endpoint@1 { ++ remote-endpoint = <&ti9x4_des2ep0>; + }; + }; + }; @@ -16378,11 +16418,8 @@ index 0000000..df27324 + vin5_max9286_des2ep1: endpoint@0 { + remote-endpoint = <&max9286_des2ep1>; + }; -+ vin5_ti964_des2ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des2ep1>; -+ }; -+ vin5_ti954_des2ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des2ep1>; ++ vin5_ti9x4_des2ep1: endpoint@1 { ++ remote-endpoint = <&ti9x4_des2ep1>; + }; + }; + }; @@ -16410,8 +16447,8 @@ index 0000000..df27324 + vin6_max9286_des2ep2: endpoint@0 { + remote-endpoint = <&max9286_des2ep2>; + }; -+ vin6_ti964_des2ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des2ep2>; ++ vin6_ti9x4_des2ep2: endpoint@1 { ++ remote-endpoint = <&ti9x4_des2ep2>; + }; + }; + }; @@ -16439,8 +16476,8 @@ index 0000000..df27324 + vin7_max9286_des2ep3: endpoint@0 { + remote-endpoint = <&max9286_des2ep3>; + }; -+ vin7_ti964_des2ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des2ep3>; ++ vin7_ti9x4_des2ep3: endpoint@1 { ++ remote-endpoint = <&ti9x4_des2ep3>; + }; + }; + }; @@ -16481,10 +16518,10 @@ index 0000000..df27324 +}; diff --git a/arch/arm64/boot/dts/renesas/ulcb-vb.dtsi b/arch/arm64/boot/dts/renesas/ulcb-vb.dtsi new file mode 100644 -index 0000000..ab52fff +index 0000000..07594447 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/ulcb-vb.dtsi -@@ -0,0 +1,1770 @@ +@@ -0,0 +1,1678 @@ +/* + * Device Tree Source for the ULCB Videobox board + * @@ -17013,11 +17050,8 @@ index 0000000..ab52fff + ov106xx_max9286_des0ep0: endpoint@0 { + remote-endpoint = <&max9286_des0ep0>; + }; -+ ov106xx_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; -+ }; -+ ov106xx_ti954_des0ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep0>; ++ ov106xx_ti9x4_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep0>; + }; + }; + }; @@ -17037,11 +17071,8 @@ index 0000000..ab52fff + ov106xx_max9286_des0ep1: endpoint@0 { + remote-endpoint = <&max9286_des0ep1>; + }; -+ ov106xx_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; -+ }; -+ ov106xx_ti954_des0ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep1>; ++ ov106xx_ti9x4_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep1>; + }; + }; + }; @@ -17061,8 +17092,8 @@ index 0000000..ab52fff + ov106xx_max9286_des0ep2: endpoint@0 { + remote-endpoint = <&max9286_des0ep2>; + }; -+ ov106xx_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; ++ ov106xx_ti9x4_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep2>; + }; + }; + }; @@ -17082,15 +17113,15 @@ index 0000000..ab52fff + ov106xx_max9286_des0ep3: endpoint@0 { + remote-endpoint = <&max9286_des0ep3>; + }; -+ ov106xx_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; ++ ov106xx_ti9x4_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep3>; + }; + }; + }; + -+ /* DS90UB964 @ 0x3a */ -+ ti964-ti9x3@0 { -+ compatible = "ti,ti964-ti9x3"; ++ /* DS90UB9x4 @ 0x3a */ ++ ti9x4@0 { ++ compatible = "ti,ti9x4"; + reg = <0x3a>; + ti,links = <4>; + ti,lanes = <4>; @@ -17102,63 +17133,29 @@ index 0000000..ab52fff + POC3-supply = <&pwr3A>; + + port@0 { -+ ti964_des0ep0: endpoint@0 { ++ ti9x4_des0ep0: endpoint@0 { + ti9x3-addr = <0x0c>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in0>; + }; -+ ti964_des0ep1: endpoint@1 { ++ ti9x4_des0ep1: endpoint@1 { + ti9x3-addr = <0x0d>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in1>; + }; -+ ti964_des0ep2: endpoint@2 { ++ ti9x4_des0ep2: endpoint@2 { + ti9x3-addr = <0x0e>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in2>; + }; -+ ti964_des0ep3: endpoint@3 { ++ ti9x4_des0ep3: endpoint@3 { + ti9x3-addr = <0x0f>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in3>; + }; + }; + port@1 { -+ ti964_csi0ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB954 @ 0x38 */ -+ ti954-ti9x3@0 { -+ compatible = "ti,ti954-ti9x3"; -+ reg = <0x38>; -+ /* gpios = <&gpio_exp_a_5c 10 GPIO_ACTIVE_HIGH>; */ -+ ti,links = <2>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "stp"; -+ POC0-supply = <&pwr0A>; -+ POC1-supply = <&pwr1A>; -+ POC2-supply = <&pwr2A>; -+ POC3-supply = <&pwr3A>; -+ -+ port@0 { -+ ti954_des0ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ ti954_des0ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ }; -+ port@1 { -+ ti954_csi0ep0: endpoint { ++ ti9x4_csi0ep0: endpoint { + csi-rate = <1450>; + remote-endpoint = <&csi2_40_ep>; + }; @@ -17231,11 +17228,8 @@ index 0000000..ab52fff + ov106xx_max9286_des1ep0: endpoint@0 { + remote-endpoint = <&max9286_des1ep0>; + }; -+ ov106xx_ti964_des1ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep0>; -+ }; -+ ov106xx_ti954_des1ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep0>; ++ ov106xx_ti9x4_des1ep0: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep0>; + }; + }; + }; @@ -17255,11 +17249,8 @@ index 0000000..ab52fff + ov106xx_max9286_des1ep1: endpoint@0 { + remote-endpoint = <&max9286_des1ep1>; + }; -+ ov106xx_ti964_des1ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep1>; -+ }; -+ ov106xx_ti954_des1ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep1>; ++ ov106xx_ti9x4_des1ep1: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep1>; + }; + }; + }; @@ -17279,8 +17270,8 @@ index 0000000..ab52fff + ov106xx_max9286_des1ep2: endpoint@0 { + remote-endpoint = <&max9286_des1ep2>; + }; -+ ov106xx_ti964_des1ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep2>; ++ ov106xx_ti9x4_des1ep2: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep2>; + }; + }; + }; @@ -17300,15 +17291,15 @@ index 0000000..ab52fff + ov106xx_max9286_des1ep3: endpoint@0 { + remote-endpoint = <&max9286_des1ep3>; + }; -+ ov106xx_ti964_des1ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep3>; ++ ov106xx_ti9x4_des1ep3: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep3>; + }; + }; + }; + -+ /* DS90UB964 @ 0x3a */ -+ ti964-ti9x3@1 { -+ compatible = "ti,ti964-ti9x3"; ++ /* DS90UB9x4 @ 0x3a */ ++ ti9x4@1 { ++ compatible = "ti,ti9x4"; + reg = <0x3a>; + ti,links = <4>; + ti,lanes = <4>; @@ -17320,63 +17311,29 @@ index 0000000..ab52fff + POC3-supply = <&pwr3B>; + + port@0 { -+ ti964_des1ep0: endpoint@0 { ++ ti9x4_des1ep0: endpoint@0 { + ti9x3-addr = <0x0c>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in4>; + }; -+ ti964_des1ep1: endpoint@1 { ++ ti9x4_des1ep1: endpoint@1 { + ti9x3-addr = <0x0d>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in5>; + }; -+ ti964_des1ep2: endpoint@2 { ++ ti9x4_des1ep2: endpoint@2 { + ti9x3-addr = <0x0e>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in6>; + }; -+ ti964_des1ep3: endpoint@3 { ++ ti9x4_des1ep3: endpoint@3 { + ti9x3-addr = <0x0f>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in7>; + }; + }; + port@1 { -+ ti964_csi2ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB954 @ 0x38 */ -+ ti954-ti9x3@1 { -+ compatible = "ti,ti954-ti9x3"; -+ reg = <0x38>; -+ /* gpios = <&gpio_exp_b_5c 10 GPIO_ACTIVE_HIGH>; */ -+ ti,links = <2>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "stp"; -+ POC0-supply = <&pwr0B>; -+ POC1-supply = <&pwr1B>; -+ POC2-supply = <&pwr2B>; -+ POC3-supply = <&pwr3B>; -+ -+ port@0 { -+ ti954_des1ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ ti954_des1ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ }; -+ port@1 { -+ ti954_csi2ep0: endpoint { ++ ti9x4_csi2ep0: endpoint { + csi-rate = <1450>; + remote-endpoint = <&csi2_41_ep>; + }; @@ -17866,11 +17823,8 @@ index 0000000..ab52fff + vin0_max9286_des0ep0: endpoint@0 { + remote-endpoint = <&max9286_des0ep0>; + }; -+ vin0_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; -+ }; -+ vin0_ti954_des0ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep0>; ++ vin0_ti9x4_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep0>; + }; + }; + }; @@ -17900,11 +17854,8 @@ index 0000000..ab52fff + vin1_max9286_des0ep1: endpoint@0 { + remote-endpoint = <&max9286_des0ep1>; + }; -+ vin1_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; -+ }; -+ vin1_ti954_des0ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep1>; ++ vin1_ti9x4_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep1>; + }; + }; + }; @@ -17934,8 +17885,8 @@ index 0000000..ab52fff + vin2_max9286_des0ep2: endpoint@0 { + remote-endpoint = <&max9286_des0ep2>; + }; -+ vin2_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; ++ vin2_ti9x4_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep2>; + }; + }; + }; @@ -17965,8 +17916,8 @@ index 0000000..ab52fff + vin3_max9286_des0ep3: endpoint@0 { + remote-endpoint = <&max9286_des0ep3>; + }; -+ vin3_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; ++ vin3_ti9x4_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep3>; + }; + }; + }; @@ -17996,11 +17947,8 @@ index 0000000..ab52fff + vin4_max9286_des1ep0: endpoint@0 { + remote-endpoint = <&max9286_des1ep0>; + }; -+ vin4_ti964_des1ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep0>; -+ }; -+ vin4_ti954_des1ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep0>; ++ vin4_ti9x4_des1ep0: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep0>; + }; + }; + }; @@ -18030,11 +17978,8 @@ index 0000000..ab52fff + vin5_max9286_des1ep1: endpoint@0 { + remote-endpoint = <&max9286_des1ep1>; + }; -+ vin5_ti964_des1ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep1>; -+ }; -+ vin5_ti954_des1ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep1>; ++ vin5_ti9x4_des1ep1: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep1>; + }; + }; + }; @@ -18064,8 +18009,8 @@ index 0000000..ab52fff + vin6_max9286_des1ep2: endpoint@0 { + remote-endpoint = <&max9286_des1ep2>; + }; -+ vin6_ti964_des1ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep2>; ++ vin6_ti9x4_des1ep2: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep2>; + }; + }; + }; @@ -18095,8 +18040,8 @@ index 0000000..ab52fff + vin7_max9286_des1ep3: endpoint@0 { + remote-endpoint = <&max9286_des1ep3>; + }; -+ vin7_ti964_des1ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep3>; ++ vin7_ti9x4_des1ep3: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep3>; + }; + }; + }; @@ -18257,10 +18202,10 @@ index 0000000..ab52fff +//#include "ulcb-vb-cn12.dtsi" diff --git a/arch/arm64/boot/dts/renesas/ulcb-vb2.dtsi b/arch/arm64/boot/dts/renesas/ulcb-vb2.dtsi new file mode 100644 -index 0000000..72045a7 +index 0000000..b0145a2 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/ulcb-vb2.dtsi -@@ -0,0 +1,1820 @@ +@@ -0,0 +1,1724 @@ +/* + * Device Tree Source for the ULCB Videobox V2 board + * @@ -18807,11 +18752,8 @@ index 0000000..72045a7 + ov106xx_max9286_des0ep0: endpoint@0 { + remote-endpoint = <&max9286_des0ep0>; + }; -+ ov106xx_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; -+ }; -+ ov106xx_ti954_des0ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep0>; ++ ov106xx_ti9x4_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep0>; + }; + }; + }; @@ -18831,11 +18773,8 @@ index 0000000..72045a7 + ov106xx_max9286_des0ep1: endpoint@0 { + remote-endpoint = <&max9286_des0ep1>; + }; -+ ov106xx_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; -+ }; -+ ov106xx_ti954_des0ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep1>; ++ ov106xx_ti9x4_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep1>; + }; + }; + }; @@ -18855,8 +18794,8 @@ index 0000000..72045a7 + ov106xx_max9286_des0ep2: endpoint@0 { + remote-endpoint = <&max9286_des0ep2>; + }; -+ ov106xx_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; ++ ov106xx_ti9x4_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep2>; + }; + }; + }; @@ -18876,15 +18815,15 @@ index 0000000..72045a7 + ov106xx_max9286_des0ep3: endpoint@0 { + remote-endpoint = <&max9286_des0ep3>; + }; -+ ov106xx_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; ++ ov106xx_ti9x4_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep3>; + }; + }; + }; + -+ /* DS90UB964 @ 0x3a */ -+ ti964-ti9x3@0 { -+ compatible = "ti,ti964-ti9x3"; ++ /* DS90UB9x4 @ 0x3a */ ++ ti9x4@0 { ++ compatible = "ti,ti9x4"; + reg = <0x3a>; + ti,links = <4>; + ti,lanes = <4>; @@ -18896,63 +18835,29 @@ index 0000000..72045a7 + POC3-supply = <&pwr3A>; + + port@0 { -+ ti964_des0ep0: endpoint@0 { ++ ti9x4_des0ep0: endpoint@0 { + ti9x3-addr = <0x0c>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in0>; + }; -+ ti964_des0ep1: endpoint@1 { ++ ti9x4_des0ep1: endpoint@1 { + ti9x3-addr = <0x0d>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in1>; + }; -+ ti964_des0ep2: endpoint@2 { ++ ti9x4_des0ep2: endpoint@2 { + ti9x3-addr = <0x0e>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in2>; + }; -+ ti964_des0ep3: endpoint@3 { ++ ti9x4_des0ep3: endpoint@3 { + ti9x3-addr = <0x0f>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in3>; + }; + }; + port@1 { -+ ti964_csi0ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB954 @ 0x38 */ -+ ti954-ti9x3@0 { -+ compatible = "ti,ti954-ti9x3"; -+ reg = <0x38>; -+ /* gpios = <&gpio_exp_a_5c 10 GPIO_ACTIVE_HIGH>; */ -+ ti,links = <2>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "stp"; -+ POC0-supply = <&pwr0A>; -+ POC1-supply = <&pwr1A>; -+ POC2-supply = <&pwr2A>; -+ POC3-supply = <&pwr3A>; -+ -+ port@0 { -+ ti954_des0ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ ti954_des0ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ }; -+ port@1 { -+ ti954_csi0ep0: endpoint { ++ ti9x4_csi0ep0: endpoint { + csi-rate = <1450>; + remote-endpoint = <&csi2_40_ep>; + }; @@ -19025,11 +18930,8 @@ index 0000000..72045a7 + ov106xx_max9286_des1ep0: endpoint@0 { + remote-endpoint = <&max9286_des1ep0>; + }; -+ ov106xx_ti964_des1ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep0>; -+ }; -+ ov106xx_ti954_des1ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep0>; ++ ov106xx_ti9x4_des1ep0: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep0>; + }; + }; + }; @@ -19049,11 +18951,8 @@ index 0000000..72045a7 + ov106xx_max9286_des1ep1: endpoint@0 { + remote-endpoint = <&max9286_des1ep1>; + }; -+ ov106xx_ti964_des1ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep1>; -+ }; -+ ov106xx_ti954_des1ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep1>; ++ ov106xx_ti9x4_des1ep1: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep1>; + }; + }; + }; @@ -19073,8 +18972,8 @@ index 0000000..72045a7 + ov106xx_max9286_des1ep2: endpoint@0 { + remote-endpoint = <&max9286_des1ep2>; + }; -+ ov106xx_ti964_des1ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep2>; ++ ov106xx_ti9x4_des1ep2: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep2>; + }; + }; + }; @@ -19094,15 +18993,15 @@ index 0000000..72045a7 + ov106xx_max9286_des1ep3: endpoint@0 { + remote-endpoint = <&max9286_des1ep3>; + }; -+ ov106xx_ti964_des1ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep3>; ++ ov106xx_ti9x4_des1ep3: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep3>; + }; + }; + }; + -+ /* DS90UB964 @ 0x3a */ -+ ti964-ti9x3@1 { -+ compatible = "ti,ti964-ti9x3"; ++ /* DS90UB9x4 @ 0x3a */ ++ ti9x4@1 { ++ compatible = "ti,ti9x4"; + reg = <0x3a>; + ti,links = <4>; + ti,lanes = <4>; @@ -19114,63 +19013,29 @@ index 0000000..72045a7 + POC3-supply = <&pwr3B>; + + port@0 { -+ ti964_des1ep0: endpoint@0 { ++ ti9x4_des1ep0: endpoint@0 { + ti9x3-addr = <0x0c>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in4>; + }; -+ ti964_des1ep1: endpoint@1 { ++ ti9x4_des1ep1: endpoint@1 { + ti9x3-addr = <0x0d>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in5>; + }; -+ ti964_des1ep2: endpoint@2 { ++ ti9x4_des1ep2: endpoint@2 { + ti9x3-addr = <0x0e>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in6>; + }; -+ ti964_des1ep3: endpoint@3 { ++ ti9x4_des1ep3: endpoint@3 { + ti9x3-addr = <0x0f>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in7>; + }; + }; + port@1 { -+ ti964_csi2ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB954 @ 0x38 */ -+ ti954-ti9x3@1 { -+ compatible = "ti,ti954-ti9x3"; -+ reg = <0x38>; -+ /* gpios = <&gpio_exp_b_5c 10 GPIO_ACTIVE_HIGH>; */ -+ ti,links = <2>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "stp"; -+ POC0-supply = <&pwr0B>; -+ POC1-supply = <&pwr1B>; -+ POC2-supply = <&pwr2B>; -+ POC3-supply = <&pwr3B>; -+ -+ port@0 { -+ ti954_des1ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ ti954_des1ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ }; -+ port@1 { -+ ti954_csi2ep0: endpoint { ++ ti9x4_csi2ep0: endpoint { + csi-rate = <1450>; + remote-endpoint = <&csi2_41_ep>; + }; @@ -19680,11 +19545,8 @@ index 0000000..72045a7 + vin0_max9286_des0ep0: endpoint@0 { + remote-endpoint = <&max9286_des0ep0>; + }; -+ vin0_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; -+ }; -+ vin0_ti954_des0ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep0>; ++ vin0_ti9x4_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep0>; + }; + }; + }; @@ -19714,11 +19576,8 @@ index 0000000..72045a7 + vin1_max9286_des0ep1: endpoint@0 { + remote-endpoint = <&max9286_des0ep1>; + }; -+ vin1_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; -+ }; -+ vin1_ti954_des0ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep1>; ++ vin1_ti9x4_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep1>; + }; + }; + }; @@ -19748,8 +19607,8 @@ index 0000000..72045a7 + vin2_max9286_des0ep2: endpoint@0 { + remote-endpoint = <&max9286_des0ep2>; + }; -+ vin2_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; ++ vin2_ti9x4_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep2>; + }; + }; + }; @@ -19779,8 +19638,8 @@ index 0000000..72045a7 + vin3_max9286_des0ep3: endpoint@0 { + remote-endpoint = <&max9286_des0ep3>; + }; -+ vin3_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; ++ vin3_ti9x4_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep3>; + }; + }; + }; @@ -19810,11 +19669,8 @@ index 0000000..72045a7 + vin4_max9286_des1ep0: endpoint@0 { + remote-endpoint = <&max9286_des1ep0>; + }; -+ vin4_ti964_des1ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep0>; -+ }; -+ vin4_ti954_des1ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep0>; ++ vin4_ti9x4_des1ep0: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep0>; + }; + }; + }; @@ -19844,11 +19700,8 @@ index 0000000..72045a7 + vin5_max9286_des1ep1: endpoint@0 { + remote-endpoint = <&max9286_des1ep1>; + }; -+ vin5_ti964_des1ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep1>; -+ }; -+ vin5_ti954_des1ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep1>; ++ vin5_ti9x4_des1ep1: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep1>; + }; + }; + }; @@ -19878,8 +19731,8 @@ index 0000000..72045a7 + vin6_max9286_des1ep2: endpoint@0 { + remote-endpoint = <&max9286_des1ep2>; + }; -+ vin6_ti964_des1ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep2>; ++ vin6_ti9x4_des1ep2: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep2>; + }; + }; + }; @@ -19909,8 +19762,8 @@ index 0000000..72045a7 + vin7_max9286_des1ep3: endpoint@0 { + remote-endpoint = <&max9286_des1ep3>; + }; -+ vin7_ti964_des1ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep3>; ++ vin7_ti9x4_des1ep3: endpoint@1 { ++ remote-endpoint = <&ti9x4_des1ep3>; + }; + }; + }; @@ -20083,7 +19936,7 @@ index 0000000..72045a7 +//#include "ulcb-vb2-cn12.dtsi" diff --git a/arch/arm64/boot/dts/renesas/ulcb-vbm.dtsi b/arch/arm64/boot/dts/renesas/ulcb-vbm.dtsi new file mode 100644 -index 0000000..2be4a7c +index 0000000..bc36e95 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/ulcb-vbm.dtsi @@ -0,0 +1,577 @@ @@ -20281,8 +20134,8 @@ index 0000000..2be4a7c + ov106xx_max9286_des0ep0: endpoint@0 { + remote-endpoint = <&max9286_des0ep0>; + }; -+ ov106xx_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; ++ ov106xx_ti9x4_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep0>; + }; + }; + }; @@ -20302,8 +20155,8 @@ index 0000000..2be4a7c + ov106xx_max9286_des0ep1: endpoint@0 { + remote-endpoint = <&max9286_des0ep1>; + }; -+ ov106xx_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; ++ ov106xx_ti9x4_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep1>; + }; + }; + }; @@ -20323,8 +20176,8 @@ index 0000000..2be4a7c + ov106xx_max9286_des0ep2: endpoint@0 { + remote-endpoint = <&max9286_des0ep2>; + }; -+ ov106xx_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; ++ ov106xx_ti9x4_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep2>; + }; + }; + }; @@ -20344,8 +20197,8 @@ index 0000000..2be4a7c + ov106xx_max9286_des0ep3: endpoint@0 { + remote-endpoint = <&max9286_des0ep3>; + }; -+ ov106xx_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; ++ ov106xx_ti9x4_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep3>; + }; + }; + }; @@ -20393,8 +20246,8 @@ index 0000000..2be4a7c + }; + }; + -+ ti964-ti9x3@0 { -+ compatible = "ti,ti964-ti9x3"; ++ ti9x4@0 { ++ compatible = "ti,ti9x4"; + reg = <0x3a>; + ti,sensor_delay = <350>; + ti,links = <4>; @@ -20407,29 +20260,29 @@ index 0000000..2be4a7c + POC3-supply = <&pwr3>; + + port@0 { -+ ti964_des0ep0: endpoint@0 { ++ ti9x4_des0ep0: endpoint@0 { + ti9x3-addr = <0x0c>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in0>; + }; -+ ti964_des0ep1: endpoint@1 { ++ ti9x4_des0ep1: endpoint@1 { + ti9x3-addr = <0x0d>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in1>; + }; -+ ti964_des0ep2: endpoint@2 { ++ ti9x4_des0ep2: endpoint@2 { + ti9x3-addr = <0x0e>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in2>; + }; -+ ti964_des0ep3: endpoint@3 { ++ ti9x4_des0ep3: endpoint@3 { + ti9x3-addr = <0x0f>; + dvp-order = <0>; + remote-endpoint = <&ov106xx_in3>; + }; + }; + port@1 { -+ ti964_csi0ep0: endpoint { ++ ti9x4_csi0ep0: endpoint { + csi-rate = <1450>; + remote-endpoint = <&csi2_41_ep>; + }; @@ -20564,8 +20417,8 @@ index 0000000..2be4a7c + vin4_max9286_des0ep0: endpoint@0 { + remote-endpoint = <&max9286_des0ep0>; + }; -+ vin4_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; ++ vin4_ti9x4_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep0>; + }; + }; + }; @@ -20595,8 +20448,8 @@ index 0000000..2be4a7c + vin5_max9286_des0ep1: endpoint@0 { + remote-endpoint = <&max9286_des0ep1>; + }; -+ vin5_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; ++ vin5_ti9x4_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep1>; + }; + }; + }; @@ -20626,8 +20479,8 @@ index 0000000..2be4a7c + vin6_max9286_des0ep2: endpoint@0 { + remote-endpoint = <&max9286_des0ep2>; + }; -+ vin6_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; ++ vin6_ti9x4_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep2>; + }; + }; + }; @@ -20657,8 +20510,8 @@ index 0000000..2be4a7c + vin7_max9286_des0ep3: endpoint@0 { + remote-endpoint = <&max9286_des0ep3>; + }; -+ vin7_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; ++ vin7_ti9x4_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti9x4_des0ep3>; + }; + }; + }; diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/condor.cfg b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/condor.cfg index c32c426..9b2a6a9 100644 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/condor.cfg +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/condor.cfg @@ -18,7 +18,7 @@ CONFIG_VIDEO_RCAR_CSI2_LEGACY=y CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_SCALE_CROP=y CONFIG_SOC_CAMERA_PLATFORM=y -CONFIG_SOC_CAMERA_MAX9286_MAX9271=y +CONFIG_SOC_CAMERA_MAX9286=y CONFIG_SOC_CAMERA_OV106XX=y CONFIG_VIDEO_RENESAS_IMR=y CONFIG_INPUT_TOUCHSCREEN=y diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/eagle.cfg b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/eagle.cfg index ce08b0d..f6ae11f 100644 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/eagle.cfg +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/eagle.cfg @@ -18,7 +18,7 @@ CONFIG_VIDEO_RCAR_CSI2_LEGACY=y CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_SCALE_CROP=y CONFIG_SOC_CAMERA_PLATFORM=y -CONFIG_SOC_CAMERA_MAX9286_MAX9271=y +CONFIG_SOC_CAMERA_MAX9286=y CONFIG_SOC_CAMERA_OV106XX=y CONFIG_VIDEO_RENESAS_IMR=y CONFIG_INPUT_TOUCHSCREEN=y diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/salvator-x.cfg b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/salvator-x.cfg index a42b74c..36c6103 100644 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/salvator-x.cfg +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/salvator-x.cfg @@ -17,7 +17,7 @@ CONFIG_VIDEO_RCAR_CSI2_LEGACY=y CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_SCALE_CROP=y CONFIG_SOC_CAMERA_PLATFORM=y -CONFIG_SOC_CAMERA_MAX9286_MAX9271=y +CONFIG_SOC_CAMERA_MAX9286=y CONFIG_SOC_CAMERA_OV106XX=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_PLATFORM=y diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/ulcb.cfg b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/ulcb.cfg index ed9fcb8..49f841f 100644 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/ulcb.cfg +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/ulcb.cfg @@ -27,9 +27,8 @@ CONFIG_VIDEO_RCAR_CSI2_LEGACY=y CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_SCALE_CROP=y CONFIG_SOC_CAMERA_PLATFORM=y -CONFIG_SOC_CAMERA_MAX9286_MAX9271=y -CONFIG_SOC_CAMERA_TI964_TI9X3=y -CONFIG_SOC_CAMERA_TI954_TI9X3=y +CONFIG_SOC_CAMERA_MAX9286=y +CONFIG_SOC_CAMERA_TI9X4=y CONFIG_SOC_CAMERA_OV106XX=y CONFIG_SOC_CAMERA_OV5647=y CONFIG_SOC_CAMERA_OV5642=y diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/v3msk.cfg b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/v3msk.cfg index 7dea6e2..1a3ba75 100644 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/v3msk.cfg +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/v3msk.cfg @@ -21,9 +21,8 @@ CONFIG_VIDEO_RCAR_CSI2_LEGACY=y CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_SCALE_CROP=y CONFIG_SOC_CAMERA_PLATFORM=y -CONFIG_SOC_CAMERA_MAX9286_MAX9271=y -CONFIG_SOC_CAMERA_TI964_TI9X3=y -CONFIG_SOC_CAMERA_TI954_TI9X3=y +CONFIG_SOC_CAMERA_MAX9286=y +CONFIG_SOC_CAMERA_TI9X4=y CONFIG_SOC_CAMERA_OV106XX=y CONFIG_VIDEO_RENESAS_IMR=y CONFIG_INPUT_TOUCHSCREEN=y |