diff options
Diffstat (limited to 'meta-rcar-gen3-adas/recipes-kernel')
16 files changed, 13643 insertions, 13993 deletions
diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0031-arm64-dts-r8a7795-es1-salvator-x-view-add-ADAS-board.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0031-arm64-dts-r8a7795-es1-salvator-x-view-add-ADAS-board.patch deleted file mode 100644 index ddcff1d..0000000 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0031-arm64-dts-r8a7795-es1-salvator-x-view-add-ADAS-board.patch +++ /dev/null @@ -1,588 +0,0 @@ -From c4d2ada2089db7db1a059af37f371f6e2df213f4 Mon Sep 17 00:00:00 2001 -From: Vladimir Barinov <vladimir.barinov@cogentembedded.com> -Date: Wed, 4 Jan 2017 10:37:23 +0300 -Subject: [PATCH] arm64: dts: r8a7795-es1-salvator-x-view: add ADAS board - -Salvator-X.View board on R8A7795 ES1.x SoC - -Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> ---- - arch/arm64/boot/dts/renesas/Makefile | 3 + - .../dts/renesas/r8a7795-es1-salvator-x-view.dts | 552 +++++++++++++++++++++ - 2 files changed, 555 insertions(+) - create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x-view.dts - -diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile -index 32fb4d9..2a00759 100644 ---- a/arch/arm64/boot/dts/renesas/Makefile -+++ b/arch/arm64/boot/dts/renesas/Makefile -@@ -4,5 +4,8 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb r8a7795-es1-h3ulcb.dtb - dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb - dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb - -+# ADAS boards -+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x-view.dtb -+ - always := $(dtb-y) - clean-files := *.dtb -diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x-view.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x-view.dts -new file mode 100644 -index 0000000..3f3d66a ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x-view.dts -@@ -0,0 +1,552 @@ -+/* -+ * Device Tree Source for the Salvator-X.View board on r8a7795 ES1.x -+ * -+ * Copyright (C) 2016-2017 Renesas Electronics Corp. -+ * Copyright (C) 2015-2017 Cogent Embedded, Inc -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+#include "r8a7795-es1-salvator-x.dts" -+ -+/ { -+ model = "Renesas Salvator-X.View board based on r8a7795"; -+}; -+ -+&pfc { -+ can0_pins: can0 { -+ groups = "can0_data_a"; -+ function = "can0"; -+ }; -+ -+ can1_pins: can1 { -+ groups = "can1_data"; -+ function = "can1"; -+ }; -+}; -+ -+&i2c4 { -+ /delete-node/hdmi-in@34; -+ /delete-node/composite-in@70; -+ -+ ov106xx@0 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x60>; -+ -+ port@0 { -+ ov106xx_in0: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin0ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep0>; -+ }; -+ }; -+ }; -+ -+ ov106xx@1 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x61>; -+ -+ port@0 { -+ ov106xx_in1: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin1ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep1>; -+ }; -+ }; -+ }; -+ -+ ov106xx@2 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x62>; -+ -+ port@0 { -+ ov106xx_in2: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin2ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep2>; -+ }; -+ }; -+ }; -+ -+ ov106xx@3 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x63>; -+ -+ port@0 { -+ ov106xx_in3: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin3ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_des0ep3: endpoint { -+ remote-endpoint = <&max9286_des0ep3>; -+ }; -+ }; -+ }; -+ -+ ov106xx@4 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x64>; -+ -+ port@0 { -+ ov106xx_in4: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin4ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep0>; -+ }; -+ }; -+ }; -+ -+ ov106xx@5 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x65>; -+ -+ port@0 { -+ ov106xx_in5: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin5ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep1>; -+ }; -+ }; -+ }; -+ -+ ov106xx@6 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x66>; -+ -+ port@0 { -+ ov106xx_in6: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin6ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep2>; -+ }; -+ }; -+ }; -+ -+ ov106xx@7 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x67>; -+ -+ port@0 { -+ ov106xx_in7: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin7ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_des1ep3: endpoint { -+ remote-endpoint = <&max9286_des1ep3>; -+ }; -+ }; -+ }; -+ -+ max9286-max9271@0 { -+ compatible = "maxim,max9286-max9271"; -+ reg = <0x4c>; -+ gpios = <&gpio6 30 GPIO_ACTIVE_LOW>; -+ maxim,sensor_delay = <0>; -+ maxim,links = <4>; -+ maxim,lanes = <4>; -+ maxim,resetb-gpio = <1>; -+ maxim,fsync-mode = "automatic"; -+ maxim,timeout = <100>; -+ maxim,i2c-quirk = <0x6c>; -+ -+ port@0 { -+ max9286_des0ep0: endpoint@0 { -+ max9271-addr = <0x50>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ max9286_des0ep1: endpoint@1 { -+ max9271-addr = <0x51>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ max9286_des0ep2: endpoint@2 { -+ max9271-addr = <0x52>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ max9286_des0ep3: endpoint@3 { -+ max9271-addr = <0x53>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ max9286_csi0ep0: endpoint { -+ csi-rate = <700>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ -+ max9286-max9271@1 { -+ compatible = "maxim,max9286-max9271"; -+ reg = <0x6c>; -+ maxim,sensor_delay = <0>; -+ maxim,links = <4>; -+ maxim,lanes = <4>; -+ maxim,resetb-gpio = <1>; -+ maxim,fsync-mode = "automatic"; -+ maxim,timeout = <100>; -+ -+ port@0 { -+ max9286_des1ep0: endpoint@0 { -+ max9271-addr = <0x54>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ max9286_des1ep1: endpoint@1 { -+ max9271-addr = <0x55>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ max9286_des1ep2: endpoint@2 { -+ max9271-addr = <0x56>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in6>; -+ }; -+ max9286_des1ep3: endpoint@3 { -+ max9271-addr = <0x57>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in7>; -+ }; -+ }; -+ port@1 { -+ max9286_csi2ep0: endpoint { -+ csi-rate = <700>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+}; -+ -+&vin0 { -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin0ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ }; -+ port@1 { -+ csi0ep0: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin0_max9286_des0ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep0>; -+ }; -+ }; -+ }; -+}; -+ -+&vin1 { -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin1ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <1>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ }; -+ port@1 { -+ csi0ep1: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin1_max9286_des0ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep1>; -+ }; -+ }; -+ }; -+}; -+ -+&vin2 { -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin2ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <2>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ }; -+ port@1 { -+ csi0ep2: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin2_max9286_des0ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep2>; -+ }; -+ }; -+ }; -+}; -+ -+&vin3 { -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin3ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <3>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ csi0ep3: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin3_max9286_des0ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep3>; -+ }; -+ }; -+ }; -+}; -+ -+&vin4 { -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin4ep0: endpoint { -+ csi,select = "csi41"; -+ virtual,channel = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep0: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin4_max9286_des1ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep0>; -+ }; -+ }; -+ }; -+}; -+ -+&vin5 { -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin5ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <1>; -+ remote-endpoint = <&ov106xx_in5>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep1: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin5_max9286_des1ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep1>; -+ }; -+ }; -+ }; -+}; -+ -+&vin6 { -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin6ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <2>; -+ remote-endpoint = <&ov106xx_in6>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep2: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin6_max9286_des1ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep2>; -+ }; -+ }; -+ }; -+}; -+ -+&vin7 { -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin7ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <3>; -+ remote-endpoint = <&ov106xx_in7>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep3: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin7_max9286_des1ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep3>; -+ }; -+ }; -+ }; -+}; -+ -+&csi2_20 { -+ status = "disabled"; -+ /delete-node/ports; -+}; -+ -+&csi2_40 { -+ /delete-node/ports; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "ycbcr422"; -+ receive,vc = <0>; -+ }; -+ csi2_vc1 { -+ data,type = "ycbcr422"; -+ receive,vc = <1>; -+ }; -+ csi2_vc2 { -+ data,type = "ycbcr422"; -+ receive,vc = <2>; -+ }; -+ csi2_vc3 { -+ data,type = "ycbcr422"; -+ receive,vc = <3>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_40_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ csi-rate = <300>; -+ }; -+ }; -+}; -+ -+&csi2_41 { -+ status = "okay"; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "ycbcr422"; -+ receive,vc = <0>; -+ }; -+ csi2_vc1 { -+ data,type = "ycbcr422"; -+ receive,vc = <1>; -+ }; -+ csi2_vc2 { -+ data,type = "ycbcr422"; -+ receive,vc = <2>; -+ }; -+ csi2_vc3 { -+ data,type = "ycbcr422"; -+ receive,vc = <3>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_41_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ csi-rate = <300>; -+ }; -+ }; -+}; -+ -+&can0 { -+ pinctrl-0 = <&can0_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+}; -+ -+&can1 { -+ pinctrl-0 = <&can1_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+}; --- -1.9.1 - diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0032-arm64-dts-r8a7795-es1-h3ulcb-view-add-ADAS-board.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0032-arm64-dts-r8a7795-es1-h3ulcb-view-add-ADAS-board.patch deleted file mode 100644 index 24af837..0000000 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0032-arm64-dts-r8a7795-es1-h3ulcb-view-add-ADAS-board.patch +++ /dev/null @@ -1,581 +0,0 @@ -From 14d2ada2089db7db1a059af37f371f6e2df213f4 Mon Sep 17 00:00:00 2001 -From: Vladimir Barinov <vladimir.barinov@cogentembedded.com> -Date: Wed, 4 Jan 2017 10:37:23 +0300 -Subject: [PATCH] arm64: dts: r8a7795-es1-h3ulcb-view: add ADAS board - -H3ULCB.View board on R8A7795 ES1.x SoC - -Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> ---- - arch/arm64/boot/dts/renesas/Makefile | 1 + - .../boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts | 546 +++++++++++++++++++++ - 2 files changed, 547 insertions(+) - create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts - -diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile -index 2a00759..43aa35d 100644 ---- a/arch/arm64/boot/dts/renesas/Makefile -+++ b/arch/arm64/boot/dts/renesas/Makefile -@@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb - - # ADAS boards - dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x-view.dtb -+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-view.dtb - - always := $(dtb-y) - clean-files := *.dtb -diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts -new file mode 100644 -index 0000000..de56fa4 ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts -@@ -0,0 +1,546 @@ -+/* -+ * Device Tree Source for the H3ULCB.View board on r8a7795 ES1.x -+ * -+ * Copyright (C) 2016-2017 Renesas Electronics Corp. -+ * Copyright (C) 2016-2017 Cogent Embedded, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+#include "r8a7795-es1-h3ulcb.dts" -+ -+/ { -+ model = "Renesas H3ULCB.View board based on r8a7795"; -+}; -+ -+&i2c4 { -+ ov106xx@0 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x60>; -+ -+ port@0 { -+ ov106xx_in0: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin0ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep0>; -+ }; -+ }; -+ }; -+ -+ ov106xx@1 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x61>; -+ -+ port@0 { -+ ov106xx_in1: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin1ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep1>; -+ }; -+ }; -+ }; -+ -+ ov106xx@2 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x62>; -+ -+ port@0 { -+ ov106xx_in2: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin2ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep2>; -+ }; -+ }; -+ }; -+ -+ ov106xx@3 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x63>; -+ -+ port@0 { -+ ov106xx_in3: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin3ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_des0ep3: endpoint { -+ remote-endpoint = <&max9286_des0ep3>; -+ }; -+ }; -+ }; -+ -+ ov106xx@4 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x64>; -+ -+ port@0 { -+ ov106xx_in4: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin4ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep0>; -+ }; -+ }; -+ }; -+ -+ ov106xx@5 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x65>; -+ -+ port@0 { -+ ov106xx_in5: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin5ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep1>; -+ }; -+ }; -+ }; -+ -+ ov106xx@6 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x66>; -+ -+ port@0 { -+ ov106xx_in6: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin6ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep2>; -+ }; -+ }; -+ }; -+ -+ ov106xx@7 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x67>; -+ -+ port@0 { -+ ov106xx_in7: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin7ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_des1ep3: endpoint { -+ remote-endpoint = <&max9286_des1ep3>; -+ }; -+ }; -+ }; -+ -+ max9286-max9271@0 { -+ compatible = "maxim,max9286-max9271"; -+ reg = <0x4c>; -+ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; -+ maxim,sensor_delay = <0>; -+ maxim,links = <4>; -+ maxim,lanes = <4>; -+ maxim,resetb-gpio = <1>; -+ maxim,fsync-mode = "automatic"; -+ maxim,timeout = <100>; -+ maxim,i2c-quirk = <0x6c>; -+ -+ port@0 { -+ max9286_des0ep0: endpoint@0 { -+ max9271-addr = <0x50>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ max9286_des0ep1: endpoint@1 { -+ max9271-addr = <0x51>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ max9286_des0ep2: endpoint@2 { -+ max9271-addr = <0x52>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ max9286_des0ep3: endpoint@3 { -+ max9271-addr = <0x53>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ max9286_csi0ep0: endpoint { -+ csi-rate = <700>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ -+ max9286-max9271@1 { -+ compatible = "maxim,max9286-max9271"; -+ reg = <0x6c>; -+ gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; -+ maxim,sensor_delay = <0>; -+ maxim,links = <4>; -+ maxim,lanes = <4>; -+ maxim,resetb-gpio = <1>; -+ maxim,fsync-mode = "automatic"; -+ maxim,timeout = <100>; -+ -+ port@0 { -+ max9286_des1ep0: endpoint@0 { -+ max9271-addr = <0x54>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ max9286_des1ep1: endpoint@1 { -+ max9271-addr = <0x55>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ max9286_des1ep2: endpoint@2 { -+ max9271-addr = <0x56>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in6>; -+ }; -+ max9286_des1ep3: endpoint@3 { -+ max9271-addr = <0x57>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in7>; -+ }; -+ }; -+ port@1 { -+ max9286_csi2ep0: endpoint { -+ csi-rate = <700>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+}; -+ -+&pcie_bus_clk { -+ clock-frequency = <100000000>; -+ status = "okay"; -+}; -+ -+&pciec1 { -+ status = "okay"; -+}; -+ -+&vin0 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin0ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ }; -+ port@1 { -+ csi0ep0: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin0_max9286_des0ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep0>; -+ }; -+ }; -+ }; -+}; -+ -+&vin1 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin1ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <1>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ }; -+ port@1 { -+ csi0ep1: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin1_max9286_des0ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep1>; -+ }; -+ }; -+ }; -+}; -+ -+&vin2 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin2ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <2>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ }; -+ port@1 { -+ csi0ep2: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin2_max9286_des0ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep2>; -+ }; -+ }; -+ }; -+}; -+ -+&vin3 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin3ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <3>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ csi0ep3: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin3_max9286_des0ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep3>; -+ }; -+ }; -+ }; -+}; -+ -+&vin4 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin4ep0: endpoint { -+ csi,select = "csi41"; -+ virtual,channel = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep0: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin4_max9286_des1ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep0>; -+ }; -+ }; -+ }; -+}; -+ -+&vin5 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin5ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <1>; -+ remote-endpoint = <&ov106xx_in5>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep1: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin5_max9286_des1ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep1>; -+ }; -+ }; -+ }; -+}; -+ -+&vin6 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin6ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <2>; -+ remote-endpoint = <&ov106xx_in6>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep2: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin6_max9286_des1ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep2>; -+ }; -+ }; -+ }; -+}; -+ -+&vin7 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin7ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <3>; -+ remote-endpoint = <&ov106xx_in7>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep3: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin7_max9286_des1ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep3>; -+ }; -+ }; -+ }; -+}; -+ -+&csi2_40 { -+ status = "okay"; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "ycbcr422"; -+ receive,vc = <0>; -+ }; -+ csi2_vc1 { -+ data,type = "ycbcr422"; -+ receive,vc = <1>; -+ }; -+ csi2_vc2 { -+ data,type = "ycbcr422"; -+ receive,vc = <2>; -+ }; -+ csi2_vc3 { -+ data,type = "ycbcr422"; -+ receive,vc = <3>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_40_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ csi-rate = <300>; -+ }; -+ }; -+}; -+ -+&csi2_41 { -+ status = "okay"; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "ycbcr422"; -+ receive,vc = <0>; -+ }; -+ csi2_vc1 { -+ data,type = "ycbcr422"; -+ receive,vc = <1>; -+ }; -+ csi2_vc2 { -+ data,type = "ycbcr422"; -+ receive,vc = <2>; -+ }; -+ csi2_vc3 { -+ data,type = "ycbcr422"; -+ receive,vc = <3>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_41_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ csi-rate = <300>; -+ }; -+ }; -+}; --- -1.9.1 - diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0033-arm64-dts-r8a7795-es1-h3ulcb-had-add-ADAS-board.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0033-arm64-dts-r8a7795-es1-h3ulcb-had-add-ADAS-board.patch deleted file mode 100644 index cc85e66..0000000 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0033-arm64-dts-r8a7795-es1-h3ulcb-had-add-ADAS-board.patch +++ /dev/null @@ -1,321 +0,0 @@ -From 40240b74fe0b5c851127996328504e86a9fc4407 Mon Sep 17 00:00:00 2001 -From: Vladimir Barinov <vladimir.barinov@cogentembedded.com> -Date: Wed, 4 Jan 2017 10:41:48 +0300 -Subject: [PATCH] arm64: dts: r8a7795-es1-h3ulcb-had: add ADAS board - -H3ULCB.HAD board on R8A7795 ES1.x SoC - -Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> ---- - arch/arm64/boot/dts/renesas/Makefile | 1 + - .../dts/renesas/r8a7795-es1-h3ulcb-had-alfa.dts | 22 ++ - .../dts/renesas/r8a7795-es1-h3ulcb-had-beta.dts | 23 +++ - .../boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi | 224 +++++++++++++++++++++ - 4 files changed, 270 insertions(+) - create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-alfa.dts - create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-beta.dts - create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi - -diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile -index 43aa35d..51a4ac9 100644 ---- a/arch/arm64/boot/dts/renesas/Makefile -+++ b/arch/arm64/boot/dts/renesas/Makefile -@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb - # ADAS boards - dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x-view.dtb - dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-view.dtb -+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-had-alfa.dtb r8a7795-es1-h3ulcb-had-beta.dtb - - always := $(dtb-y) - clean-files := *.dtb -diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-alfa.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-alfa.dts -new file mode 100644 -index 0000000..6b13f07 ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-alfa.dts -@@ -0,0 +1,22 @@ -+/* -+ * Device Tree Source for the H3ULCB.HAD board Alfa side on r8a7795 ES1.x -+ * -+ * Copyright (C) 2017 Renesas Electronics Corp. -+ * Copyright (C) 2017 Cogent Embedded, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+#include "r8a7795-es1-h3ulcb-had.dtsi" -+ -+/ { -+ model = "Renesas H3ULCB.HAD board Alfa side based on r8a7795"; -+}; -+ -+&pciec0 { -+ status = "okay"; -+ -+ /* Root complex */ -+}; -diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-beta.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-beta.dts -new file mode 100644 -index 0000000..2f8b274 ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-beta.dts -@@ -0,0 +1,23 @@ -+/* -+ * Device Tree Source for the H3ULCB.HAD board Beta side on r8a7795 ES1.x -+ * -+ * Copyright (C) 2017 Renesas Electronics Corp. -+ * Copyright (C) 2017 Cogent Embedded, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+#include "r8a7795-es1-h3ulcb-had.dtsi" -+ -+/ { -+ model = "Renesas H3ULCB.HAD board Beta side based on r8a7795"; -+}; -+ -+&pciec0 { -+ status = "okay"; -+ -+ /* Endpoint */ -+ endpoint; -+}; -diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi -new file mode 100644 -index 0000000..d18ff37 ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi -@@ -0,0 +1,225 @@ -+/* -+ * Device Tree Source for the H3ULCB.HAD board on r8a7795 ES1.x -+ * -+ * Copyright (C) 2016-2017 Renesas Electronics Corp. -+ * Copyright (C) 2016-2017 Cogent Embedded, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+/* -+ * MSIOF0 - /dev/spidev1.0 connected to FPGA ethernet switch (both sides) -+ * MSIOF1 - /dev/spidev2.0 connected to RH850 (sideA to CSIH1, sideB to CSIH0) -+ */ -+ -+#include "r8a7795-es1-h3ulcb-view.dts" -+ -+/ { -+ model = "Renesas H3ULCB.HAD board based on r8a7795"; -+ -+ aliases { -+ serial1 = &scif1; -+ spi1 = &spi0_gpio; -+ spi2 = &spi1_gpio; -+ }; -+ -+ chosen { -+ stdout-path = "serial1:115200n8"; -+ }; -+ -+ spi0_gpio: spi_gpio@0 { -+ compatible = "spi-gpio"; -+ num-chipselects = <1>; -+ gpio-sck = <&gpio5 17 0>; -+ gpio-mosi = <&gpio5 20 0>; -+ gpio-miso = <&gpio5 22 0>; -+ cs-gpios = <&gpio5 19 0>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ spidev@0 { -+ compatible = "spi-gpio"; -+ reg = <0>; -+ spi-max-frequency = <2000000>; -+ spi-cpha; -+ spi-cpol; -+ }; -+ }; -+ -+ spi1_gpio: spi_gpio@1 { -+ compatible = "spi-gpio"; -+ num-chipselects = <1>; -+ gpio-sck = <&gpio6 8 0>; -+ gpio-mosi = <&gpio6 7 0>; -+ gpio-miso = <&gpio6 10 0>; -+ cs-gpios = <&gpio6 5 0>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ spidev@0 { -+ compatible = "spi-gpio"; -+ reg = <0>; -+ spi-max-frequency = <2000000>; -+ spi-cpha; -+ spi-cpol; -+ }; -+ }; -+ -+ hdmi1-out { -+ compatible = "hdmi-connector"; -+ type = "a"; -+ -+ port { -+ hdmi1_con: endpoint { -+ remote-endpoint = <&rcar_dw_hdmi1_out>; -+ }; -+ }; -+ }; -+}; -+ -+&du { -+ ports { -+ port@1 { -+ endpoint { -+ remote-endpoint = <&rcar_dw_hdmi0_in>; -+ }; -+ }; -+ port@2 { -+ endpoint { -+ remote-endpoint = <&rcar_dw_hdmi1_in>; -+ }; -+ }; -+ }; -+}; -+ -+&hdmi1 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ port@0 { -+ reg = <0>; -+ rcar_dw_hdmi1_in: endpoint { -+ remote-endpoint = <&du_out_hdmi1>; -+ }; -+ }; -+ port@1 { -+ reg = <1>; -+ rcar_dw_hdmi1_out: endpoint { -+ remote-endpoint = <&hdmi1_con>; -+ }; -+ }; -+ }; -+}; -+ -+&pfc { -+ scif1_pins: scif1 { -+ groups = "scif1_data_a"; -+ function = "scif1"; -+ }; -+ -+ msiof0_pins: spi1 { -+ groups = "msiof0_clk", "msiof0_rxd", "msiof0_txd", -+ "msiof0_ss1"; -+ function = "msiof0"; -+ }; -+ -+ msiof1_pins: spi2 { -+ groups = "msiof1_clk_a", "msiof1_rxd_a", "msiof1_txd_a", -+ "msiof1_ss1_a"; -+ function = "msiof1"; -+ }; -+ -+ sound_clk_pins: sound-clk { -+ groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a", -+ "audio_clkout_a" /*, "audio_clkout3_a"*/; -+ function = "audio_clk"; -+ }; -+ -+ usb31_pins: usb31 { -+ groups = "usb31"; -+ function = "usb31"; -+ }; -+ -+ can0_pins: can0 { -+ groups = "can0_data_a"; -+ function = "can0"; -+ }; -+ -+ canfd0_pins: canfd0 { -+ groups = "canfd0_data_a"; -+ function = "canfd0"; -+ }; -+}; -+ -+&scif1 { -+ pinctrl-0 = <&scif1_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+}; -+ -+&avb { -+ /delete-property/phy-handle; -+ /delete-property/phy-gpios; -+ /delete-node/ethernet-phy@0; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+}; -+ -+&msiof0 { -+ pinctrl-0 = <&msiof0_pins>; -+ pinctrl-names = "default"; -+ status = "disabled"; -+ cs-gpios = <&gpio5 19 0>; -+ -+ spidev@0 { -+ compatible = "renesas,sh-msiof"; -+ reg = <0>; -+ spi-max-frequency = <66666666>; -+ spi-cpha; -+ spi-cpol; -+ }; -+}; -+ -+&msiof1 { -+ status = "disabled"; -+ cs-gpios = <&gpio6 5 0>; -+}; -+ -+&can0 { -+ pinctrl-0 = <&can0_pins>; -+ pinctrl-names = "default"; -+ status = "disabled"; -+ -+ renesas,can-clock-select = <0x0>; -+ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH /* enable - shared with camera board */ -+ &gpio2 7 GPIO_ACTIVE_LOW /* standby */ -+ >; -+}; -+ -+&canfd { -+ pinctrl-0 = <&canfd0_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ -+ renesas,can-clock-select = <0x0>; -+ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH /* enable - shared with camera board */ -+ &gpio2 7 GPIO_ACTIVE_LOW /* standby */ -+ >; -+ -+ channel0 { -+ status = "okay"; -+ }; -+}; -+ -+&xhci1 { -+ status = "okay"; -+ pinctrl-0 = <&usb31_pins>; -+ pinctrl-names = "default"; -+}; --- -1.9.1 - diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0034-arm64-dts-r8a7795-es1-h3ulcb-kf-add-ADAS-board.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0034-arm64-dts-r8a7795-es1-h3ulcb-kf-add-ADAS-board.patch deleted file mode 100644 index 5fe2f6f..0000000 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0034-arm64-dts-r8a7795-es1-h3ulcb-kf-add-ADAS-board.patch +++ /dev/null @@ -1,2265 +0,0 @@ -From f0f043eab3dd06552b3600af1caf50e535f766f1 Mon Sep 17 00:00:00 2001 -From: Vladimir Barinov <vladimir.barinov@cogentembedded.com> -Date: Wed, 4 Jan 2017 10:37:23 +0300 -Subject: [PATCH] arm64: dts: r8a7795-es1-h3ulcb-kf: add ADAS board - -Kingfisher board on R8A7795 ES1.x SoC - -Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> ---- - arch/arm64/boot/dts/renesas/Makefile | 1 + - .../boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts | 443 ++++++ - .../boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts | 1655 ++++++++++++++++++++ - arch/arm64/boot/dts/renesas/ulcb-kf-rpi.dtsi | 75 + - arch/arm64/boot/dts/renesas/ulcb-kf-sd3.dtsi | 33 + - 5 files changed, 2207 insertions(+) - create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts - create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts - create mode 100644 arch/arm64/boot/dts/renesas/ulcb-kf-rpi.dtsi - create mode 100644 arch/arm64/boot/dts/renesas/ulcb-kf-sd3.dtsi - -diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile -index 51a4ac9..24f8036 100644 ---- a/arch/arm64/boot/dts/renesas/Makefile -+++ b/arch/arm64/boot/dts/renesas/Makefile -@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb - dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x-view.dtb - dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-view.dtb - dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-had-alfa.dtb r8a7795-es1-h3ulcb-had-beta.dtb -+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-kf.dtb r8a7795-es1-h3ulcb-kf-v1.dtb - - always := $(dtb-y) - clean-files := *.dtb -diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts -new file mode 100644 -index 0000000..d245bbe ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts -@@ -0,0 +1,443 @@ -+/* -+ * Device Tree Source for the H3ULCB Kingfisher V1 board on r8a7795 ES1.x -+ * -+ * Copyright (C) 2017 Renesas Electronics Corp. -+ * Copyright (C) 2017 Cogent Embedded, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+#include "r8a7795-es1-h3ulcb-kf.dts" -+ -+/ { -+ model = "Renesas H3ULCB Kingfisher V1 board based on r8a7795"; -+ -+ aliases { -+ serial1 = &hscif0; -+ serial2 = &hscif1; -+ serial3 = &scif1; -+ }; -+ -+ wlan_en: regulator@4 { -+ compatible = "regulator-fixed"; -+ regulator-name = "wlan-en-regulator"; -+ -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ gpio = <&gpio_ext_74 4 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ }; -+ -+ codec_en_reg: regulator@6 { -+ compatible = "regulator-fixed"; -+ regulator-name = "codec-en-regulator"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ gpio = <&gpio_ext_74 15 0>; -+ -+ /* delay - CHECK */ -+ startup-delay-us = <70000>; -+ enable-active-high; -+ }; -+ -+ amp_en_reg: regulator@7 { -+ compatible = "regulator-fixed"; -+ regulator-name = "amp-en-regulator"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ gpio = <&gpio_ext_74 0 0>; -+ -+ startup-delay-us = <0>; -+ enable-active-high; -+ }; -+ -+ /delete-node/regulator@8; -+ -+ sdio_switch: regulator@9 { -+ compatible = "regulator-fixed"; -+ regulator-name = "wifi_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_74 5 0>; -+ enable-active-low; -+ regulator-always-on; -+ }; -+ -+ /delete-node/regulator@10; -+ -+ radio_switch: regulator@11 { -+ compatible = "regulator-fixed"; -+ regulator-name = "radio_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_74 13 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ -+ kim { -+ compatible = "kim"; -+ nshutdown_gpio = <343>; /* gpio_ext_74 pin 3 */ -+ /* serial1 */ -+ dev_name = "/dev/ttySC1"; -+ flow_cntrl = <1>; -+ /* int div 8 hscif@26.6666656MHz */ -+ baud_rate = <3333332>; -+ }; -+ -+ hdmi-out { -+ compatible = "hdmi-connector"; -+ type = "a"; -+ -+ port { -+ hdmi_con: endpoint { -+ remote-endpoint = <&adv7513_out>; -+ }; -+ }; -+ }; -+}; -+ -+&pfc { -+ /delete-node/hscif4; -+ -+ scif1_pins: scif1 { -+ groups = "scif1_data_b"; -+ function = "scif1"; -+ }; -+ -+ hscif0_pins: hscif0 { -+ groups = "hscif0_data", "hscif0_ctrl"; -+ function = "hscif0"; -+ }; -+ -+ hscif1_pins: hscif1 { -+ groups = "hscif1_data_a", "hscif1_ctrl_a"; -+ function = "hscif1"; -+ }; -+ -+ du_pins: du { -+ groups = "du_rgb888", "du_sync", "du_clk_out_0", "du_disp"; -+ function = "du"; -+ }; -+}; -+ -+&du { -+ pinctrl-0 = <&du_pins>; -+ pinctrl-names = "default"; -+ -+ ports { -+ port@0 { -+ endpoint { -+ remote-endpoint = <&adv7513_in>; -+ }; -+ }; -+ port@1 { -+ endpoint { -+ remote-endpoint = <&rcar_dw_hdmi0_in>; -+ }; -+ }; -+ }; -+}; -+ -+&gpio0 { -+ /delete-node/video_a_irq; -+ /delete-node/video_b_irq; -+ /delete-node/gpioext_2_20_irq; -+}; -+ -+&gpio1 { -+ /delete-node/gpioext_2_21_irq; -+ /delete-node/wifi_irq; -+}; -+ -+&gpio2 { -+ bl_pwm { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "BL PWM 100%"; -+ }; -+}; -+ -+&gpio5 { -+ /delete-node/touch_irq; -+ /delete-node/bt_strap; -+ -+ /* V1 has h/w bug with swapped RTS and CTS on BT interface */ -+ /* Ignore these pins */ -+ hscif0_cts { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "hscif0 CTS"; -+ }; -+ -+ hscif0_rts { -+ gpio-hog; -+ gpios = <16 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "hscif0 RTS"; -+ }; -+}; -+ -+&gpio7 { -+ /delete-node/gpioext_2_21_irq; -+}; -+ -+&scif1 { -+ pinctrl-0 = <&scif1_pins>; -+ pinctrl-names = "default"; -+ -+ status = "okay"; -+}; -+ -+&hscif0 { -+ pinctrl-0 = <&hscif0_pins>; -+ pinctrl-names = "default"; -+ ctsrts; -+ -+ status = "okay"; -+}; -+ -+&hscif1 { -+ pinctrl-0 = <&hscif1_pins>; -+ pinctrl-names = "default"; -+ -+ status = "okay"; -+}; -+ -+&hscif4 { -+ /delete-property/pinctrl-0; -+ /delete-property/pinctrl-names; -+ -+ status = "disabled"; -+}; -+ -+&i2c2 { -+ /delete-node/pca9535@20; -+ /delete-node/pca9535@21; -+ -+ gpio_ext_74: pca9539@74 { -+ compatible = "nxp,pca9539"; -+ reg = <0x74>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio6>; -+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>; -+ -+ hub_pwen { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "HUB pwen"; -+ }; -+ hub_rst { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "HUB rst"; -+ }; -+ otg_offvbus { -+ gpio-hog; -+ gpios = <8 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "OTG off VBUSn"; -+ }; -+ otg_extlpn { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "OTG EXTLPn"; -+ }; -+ otg_stat1 { -+ gpio-hog; -+ gpios = <10 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "OTG Stat1"; -+ }; -+ otg_stat2 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "OTG Stat2"; -+ }; -+ }; -+ -+ gpio_ext_75: pca9539@75 { -+ compatible = "nxp,pca9539"; -+ reg = <0x75>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio6>; -+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>; -+ -+ gps_rst { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "GPS rst"; -+ }; -+ fpdl_shdn { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "FPDLink shdn"; -+ }; -+ }; -+}; -+ -+&i2cswitch2 { -+ reg = <0x71>; -+ reset-gpios= <&gpio5 3 GPIO_ACTIVE_LOW>; -+ -+ i2c@4 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <4>; -+ -+ hdmi@3d { -+ compatible = "adi,adv7511w"; -+ reg = <0x3d>; -+ interrupt-parent = <&gpio2>; -+ interrupts = <0 IRQ_TYPE_EDGE_BOTH>; -+ pd-gpios = <&gpio_ext_75 5 GPIO_ACTIVE_LOW>; -+ -+ adi,input-depth = <8>; -+ adi,input-colorspace = "rgb"; -+ adi,input-clock = "1x"; -+ adi,input-style = <1>; -+ adi,input-justification = "evenly"; -+ adi,clock-delay = <1200>; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ reg = <0>; -+ adv7513_in: endpoint { -+ remote-endpoint = <&du_out_rgb>; -+ }; -+ }; -+ -+ port@1 { -+ reg = <1>; -+ adv7513_out: endpoint { -+ remote-endpoint = <&hdmi_con>; -+ }; -+ }; -+ }; -+ }; -+ }; -+}; -+ -+&i2c4 { -+ /delete-node/pca9535@21; -+ -+ gpio_ext_76: pca9539@76 { -+ compatible = "nxp,pca9539"; -+ reg = <0x76>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio7>; -+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>; -+ -+ port_b_a0 { -+ gpio-hog; -+ gpios = <0 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-B A0"; -+ }; -+ port_b_a1 { -+ gpio-hog; -+ gpios = <1 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B A1"; -+ }; -+ port_a_a0 { -+ gpio-hog; -+ gpios = <2 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-A A0"; -+ }; -+ port_a_a1 { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A A1"; -+ }; -+ /* pin 12 - CAM_CLK */ -+ rpi_cam_io_1 { -+ gpio-hog; -+ gpios = <10 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "RaspB_IO1"; -+ }; -+ /* pin 11 - CAM_GPIO - assume pwdn */ -+ rpi_cam_io_0 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "RaspB_IO0"; -+ }; -+ /* 0 - FPDLink output, 1 - LVDS output */ -+ lvds_vs_fpdl { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "LVDS switch"; -+ }; -+ }; -+ -+ gpio_ext_77: pca9539@77 { -+ compatible = "nxp,pca9539"; -+ reg = <0x77>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio5>; -+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>; -+ -+ mpcie_wake { -+ gpio-hog; -+ gpios = <0 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "mPCIe WAKE#"; -+ }; -+ mpcie_wdisable { -+ gpio-hog; -+ gpios = <1 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "mPCIe W_DISABLE"; -+ }; -+ mpcie_clreq { -+ gpio-hog; -+ gpios = <2 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "mPCIe CLKREQ#"; -+ }; -+ mpcie_ovc { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "mPCIe OVC"; -+ }; -+ }; -+}; -+ -+&i2cswitch4 { -+ reg = <0x71>; -+ reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>; -+}; -+ -+&wlcore { -+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>; -+}; -diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts -new file mode 100644 -index 0000000..075bf2c ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts -@@ -0,0 +1,1655 @@ -+/* -+ * Device Tree Source for the H3ULCB Kingfisher board on r8a7795 ES1.x -+ * -+ * Copyright (C) 2017 Renesas Electronics Corp. -+ * Copyright (C) 2017 Cogent Embedded, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+#include "r8a7795-es1-h3ulcb.dts" -+ -+/ { -+ model = "Renesas H3ULCB Kingfisher board based on r8a7795"; -+ -+ aliases { -+ serial1 = &hscif4; -+ }; -+ -+ snd_clk: snd_clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <24576000>; -+ clock-output-names = "scki"; -+ }; -+ -+ wlan_en: regulator@4 { -+ compatible = "regulator-fixed"; -+ regulator-name = "wlan-en-regulator"; -+ -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ gpio = <&gpio_ext_20 4 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ }; -+ -+ vcc_sdhi3: regulator@41 { -+ compatible = "regulator-fixed"; -+ -+ regulator-name = "SDHI3 Vcc"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ -+ vccq_sdhi3: regulator@5 { -+ compatible = "regulator-fixed"; -+ -+ regulator-name = "SDHI3 VccQ"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ }; -+ -+ codec_en_reg: regulator@6 { -+ compatible = "regulator-fixed"; -+ regulator-name = "codec-en-regulator"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ gpio = <&gpio_ext_20 15 0>; -+ -+ /* delay - CHECK */ -+ startup-delay-us = <70000>; -+ enable-active-high; -+ }; -+ -+ amp_en_reg: regulator@7 { -+ compatible = "regulator-fixed"; -+ regulator-name = "amp-en-regulator"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ gpio = <&gpio_ext_20 0 0>; -+ -+ startup-delay-us = <0>; -+ enable-active-high; -+ }; -+ -+ lvds_switch: regulator@8 { -+ compatible = "regulator-fixed"; -+ regulator-name = "lvds_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio1 24 0>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ -+ sdio_switch: regulator@9 { -+ compatible = "regulator-fixed"; -+ regulator-name = "wifi_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_20 5 0>; -+ enable-active-low; -+ regulator-always-on; -+ }; -+ -+ sound_switch: regulator@10 { -+ compatible = "regulator-fixed"; -+ regulator-name = "pcm3168a_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_21 5 0>; -+ enable-active-low; -+ regulator-always-on; -+ }; -+ -+ radio_switch: regulator@11 { -+ compatible = "regulator-fixed"; -+ regulator-name = "radio_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_20 13 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ -+ kim { -+ compatible = "kim"; -+ nshutdown_gpio = <343>; /* pca9535@i2c2.0x20 pin 3 */ -+ /* serial1 */ -+ dev_name = "/dev/ttySC1"; -+ flow_cntrl = <1>; -+ /* int div 8 hscif@26.6666656MHz */ -+ baud_rate = <3333332>; -+ }; -+ -+ btwilink { -+ compatible = "btwilink"; -+ }; -+ -+ sound_ext: sound@0 { -+ pinctrl-0 = <&sound_0_pins>; -+ pinctrl-names = "default"; -+ compatible = "simple-audio-card"; -+ -+ simple-audio-card,format = "left_j"; -+ simple-audio-card,name = "pcm3168a"; -+ -+ simple-audio-card,bitclock-master = <&sound_ext_master>; -+ simple-audio-card,frame-master = <&sound_ext_master>; -+ sound_ext_master: simple-audio-card,cpu@0 { -+ sound-dai = <&rcar_sound 0>; -+ dai-tdm-slot-num = <8>; -+ dai-tdm-slot-width = <32>; -+ }; -+ -+ simple-audio-card,codec@0 { -+ sound-dai = <&pcm3168a>; -+ dai-tdm-slot-num = <8>; -+ dai-tdm-slot-width = <32>; -+ system-clock-frequency = <24576000>; -+ }; -+ }; -+ -+ /delete-node/sound; -+ -+ rsnd_ak4613: sound@1 { -+ pinctrl-0 = <&sound_1_pins>; -+ pinctrl-names = "default"; -+ compatible = "simple-audio-card"; -+ -+ simple-audio-card,format = "left_j"; -+ simple-audio-card,name = "ak4613"; -+ -+ simple-audio-card,bitclock-master = <&sndcpu>; -+ simple-audio-card,frame-master = <&sndcpu>; -+ -+ sndcpu: simple-audio-card,cpu@1 { -+ sound-dai = <&rcar_sound 1>; -+ }; -+ -+ sndcodec: simple-audio-card,codec@1 { -+ sound-dai = <&ak4613>; -+ }; -+ }; -+ -+ sound_radio: sound@2 { -+ pinctrl-0 = <&sound_2_pins>; -+ pinctrl-names = "default"; -+ compatible = "simple-audio-card"; -+ -+ simple-audio-card,format = "i2s"; -+ simple-audio-card,name = "radio"; -+ -+ simple-audio-card,bitclock-master = <&sound_radio_master>; -+ simple-audio-card,frame-master = <&sound_radio_master>; -+ simple-audio-card,cpu@2 { -+ sound-dai = <&rcar_sound 2>; -+ }; -+ -+ sound_radio_master: simple-audio-card,codec@2 { -+ sound-dai = <&radio>; -+ system-clock-frequency = <12288000>; -+ }; -+ }; -+ -+ lvds-encoder { -+ compatible = "thine,thc63lvdm83d"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ port@0 { -+ reg = <0>; -+ lvds_enc_in: endpoint { -+ remote-endpoint = <&du_out_lvds0>; -+ }; -+ }; -+ port@1 { -+ reg = <1>; -+ lvds_enc_out: endpoint { -+ remote-endpoint = <&lvds_in>; -+ }; -+ }; -+ }; -+ }; -+ -+ lvds { -+ compatible = "lvds-connector"; -+ -+ width-mm = <210>; -+ height-mm = <158>; -+ -+ panel-timing { -+ /* 1280x800 @60Hz */ -+ clock-frequency = <65000000>; -+ hactive = <1280>; -+ vactive = <800>; -+ hsync-len = <40>; -+ hfront-porch = <80>; -+ hback-porch = <40>; -+ vfront-porch = <14>; -+ vback-porch = <14>; -+ vsync-len = <4>; -+ }; -+ -+ port { -+ lvds_in: endpoint { -+ remote-endpoint = <&lvds_enc_out>; -+ }; -+ }; -+ }; -+ -+ radio: si468x@0 { -+ compatible = "si,si468x-pcm"; -+ status = "okay"; -+ -+ #sound-dai-cells = <0>; -+ }; -+}; -+ -+&pfc { -+ hscif4_pins: hscif4 { -+ groups = "hscif4_data_a", "hscif4_ctrl"; -+ function = "hscif4"; -+ }; -+ -+ sdhi3_pins_3v3: sd3_3v3 { -+ groups = "sdhi3_data4", "sdhi3_ctrl"; -+ function = "sdhi3"; -+ power-source = <3300>; -+ }; -+ -+ sound_0_pins: sound0 { -+ groups = "ssi78_ctrl", "ssi7_data", "ssi8_data"; -+ function = "ssi"; -+ }; -+ -+ sound_1_pins: sound1 { -+ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; -+ function = "ssi"; -+ }; -+ -+ sound_2_pins: sound2 { -+ groups = "ssi6_ctrl", "ssi6_data"; -+ function = "ssi"; -+ }; -+ -+ usb0_pins: usb0 { -+ groups = "usb0"; -+ function = "usb0"; -+ }; -+ -+ can0_pins: can0 { -+ groups = "can0_data_a"; -+ function = "can0"; -+ }; -+ -+ can1_pins: can1 { -+ groups = "can1_data"; -+ function = "can1"; -+ }; -+ -+ canfd0_pins: canfd0 { -+ groups = "canfd0_data_a"; -+ function = "canfd0"; -+ }; -+ -+ canfd1_pins: canfd1 { -+ groups = "canfd1_data"; -+ function = "canfd1"; -+ }; -+}; -+ -+&gpio0 { -+ video_a_irq { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-A irq"; -+ }; -+ -+ video_b_irq { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-B irq"; -+ }; -+ -+ gpioext_2_20_irq { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "0x20@i2c2 irq"; -+ }; -+}; -+ -+&gpio1 { -+ gpioext_2_21_irq { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "0x21@i2c2 irq"; -+ }; -+ -+ wifi_irq { -+ gpio-hog; -+ gpios = <25 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "wifi irq"; -+ }; -+}; -+ -+&gpio5 { -+ touch_irq { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "touch irq"; -+ }; -+ -+ /* From TI forum */ -+ /* BT_AUD_OUT should be pulled low when WL_EN is activated. */ -+ /* in case it isn't, wilink8 ends up in one of the test modes that introduces various issues */ -+ bt_strap { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "BT strap pin"; -+ }; -+}; -+ -+&gpio7 { -+ gpioext_2_21_irq { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "0x21@i2c4 irq"; -+ }; -+}; -+ -+&hscif4 { -+ pinctrl-0 = <&hscif4_pins>; -+ pinctrl-names = "default"; -+ ctsrts; -+ -+ status = "okay"; -+}; -+ -+&i2c2 { -+ clock-frequency = <400000>; -+ -+ gpio_ext_20: pca9535@20 { -+ compatible = "nxp,pca9535"; -+ reg = <0x20>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio0>; -+ interrupts = <15 IRQ_TYPE_EDGE_FALLING>; -+ }; -+ -+ gpio_ext_21: pca9535@21 { -+ compatible = "nxp,pca9535"; -+ reg = <0x21>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio1>; -+ interrupts = <15 IRQ_TYPE_EDGE_FALLING>; -+ }; -+ -+ i2cswitch2: pca9548@74 { -+ compatible = "nxp,pca9548"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x74>; -+ reset-gpios = <&gpio6 5 GPIO_ACTIVE_LOW>; -+ -+ i2c@0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0>; -+ /* BCM node(s) */ -+ }; -+ -+ i2c@1 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <1>; -+ /* USB3.0 HUB node(s) */ -+ }; -+ -+ i2c@2 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <2>; -+ /* Power amp node(s) */ -+ }; -+ -+ i2c@3 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <3>; -+ /* Radio node(s) */ -+ }; -+ -+ i2c@4 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <4>; -+ /* A2B node(s) */ -+ }; -+ -+ i2c@5 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <5>; -+ /* PCIe node(s) */ -+ }; -+ -+ i2c@6 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <6>; -+ /* LVDS display node(s) */ -+ -+ polytouch: edt-ft5x06@38 { -+ compatible = "edt,edt-ft5x06"; -+ reg = <0x38>; -+ interrupt-parent = <&gpio5>; -+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>; -+ }; -+ }; -+ -+ i2c@7 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <7>; -+ /* Audio, GPS and Gyro node(s) */ -+ -+ pcm3168a: audio-codec@44 { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm3168a"; -+ reg = <0x44>; -+ clocks = <&snd_clk>; -+ clock-names = "scki"; -+ tdm; -+ VDD1-supply = <&codec_en_reg>; -+ VDD2-supply = <&codec_en_reg>; -+ VCCAD1-supply = <&codec_en_reg>; -+ VCCAD2-supply = <&codec_en_reg>; -+ VCCDA1-supply = <&_en_reg>; -+ VCCDA2-supply = <&_en_reg>; -+ }; -+ -+ lsm9ds0_acc_mag@1d { -+ compatible = "st,lsm9ds0_acc_mag"; -+ reg = <0x1d>; -+ }; -+ -+ lsm9ds0_gyr@6b { -+ compatible = "st,lsm9ds0-gyro"; -+ reg = <0x6b>; -+ }; -+ -+ /* GPS@ 0x42 */ -+ }; -+ }; -+}; -+ -+&i2c4 { -+ gpio_ext_22: pca9535@21 { -+ compatible = "nxp,pca9535"; -+ reg = <0x22>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio7>; -+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>; -+ -+ /* pin 12 - CAM_CLK */ -+ rpi_cam_io_1 { -+ gpio-hog; -+ gpios = <10 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "RaspB_IO1"; -+ }; -+ /* pin 11 - CAM_GPIO - assume pwdn */ -+ rpi_cam_io_0 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "RaspB_IO0"; -+ }; -+ }; -+ -+ i2cswitch4: pca9548@74 { -+ compatible = "nxp,pca9548"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x74>; -+ reset-gpios= <&gpio6 21 GPIO_ACTIVE_LOW>; -+ -+ i2c@0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0>; -+ /* SAM node(s) */ -+ }; -+ -+ i2c@1 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <1>; -+ /* Slot A (CN10) */ -+ -+ ov106xx@0 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x60>; -+ -+ port@0 { -+ ov106xx_in0: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin0ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep0>; -+ }; -+ ov106xx_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; -+ }; -+ ov106xx_ti954_des0ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep0>; -+ }; -+ }; -+ }; -+ -+ ov106xx@1 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x61>; -+ -+ port@0 { -+ ov106xx_in1: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin1ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep1>; -+ }; -+ ov106xx_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; -+ }; -+ ov106xx_ti954_des0ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep1>; -+ }; -+ }; -+ }; -+ -+ ov106xx@2 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x62>; -+ -+ port@0 { -+ ov106xx_in2: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin2ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep2>; -+ }; -+ ov106xx_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; -+ }; -+ }; -+ }; -+ -+ ov106xx@3 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x63>; -+ -+ port@0 { -+ ov106xx_in3: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin3ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep3>; -+ }; -+ ov106xx_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB964 @ 0x3a */ -+ ti964-ti9x3@0 { -+ compatible = "ti,ti964-ti9x3"; -+ reg = <0x3a>; -+ gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; -+ ti,sensor_delay = <350>; -+ ti,links = <4>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "coax"; -+ -+ port@0 { -+ ti964_des0ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ ti964_des0ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ ti964_des0ep2: endpoint@2 { -+ ti9x3-addr = <0x0e>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ ti964_des0ep3: endpoint@3 { -+ ti9x3-addr = <0x0f>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ ti964_csi0ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB954 @ 0x38 */ -+ ti954-ti9x3@0 { -+ compatible = "ti,ti954-ti9x3"; -+ reg = <0x38>; -+ gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; -+ ti,sensor_delay = <350>; -+ ti,links = <2>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "coax"; -+ -+ port@0 { -+ ti954_des0ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ ti954_des0ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ }; -+ port@1 { -+ ti954_csi0ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ -+ /* MAX9286 @ 0x2a */ -+ max9286-max9271@0 { -+ compatible = "maxim,max9286-max9271"; -+ reg = <0x2a>; -+ maxim,sensor_delay = <350>; -+ maxim,links = <4>; -+ maxim,lanes = <4>; -+ maxim,resetb-gpio = <1>; -+ maxim,fsync-mode = "automatic"; -+ maxim,timeout = <100>; -+ -+ port@0 { -+ max9286_des0ep0: endpoint@0 { -+ max9271-addr = <0x50>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ max9286_des0ep1: endpoint@1 { -+ max9271-addr = <0x51>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ max9286_des0ep2: endpoint@2 { -+ max9271-addr = <0x52>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ max9286_des0ep3: endpoint@3 { -+ max9271-addr = <0x53>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ max9286_csi0ep0: endpoint { -+ csi-rate = <700>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ }; -+ -+ i2c@2 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <2>; -+ /* Slot B (CN11) */ -+ -+ ov106xx@4 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x64>; -+ -+ port@0 { -+ ov106xx_in4: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin4ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep0>; -+ }; -+ ov106xx_ti964_des1ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep0>; -+ }; -+ ov106xx_ti954_des1ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep0>; -+ }; -+ }; -+ }; -+ -+ ov106xx@5 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x65>; -+ -+ port@0 { -+ ov106xx_in5: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin5ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep1>; -+ }; -+ ov106xx_ti964_des1ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep1>; -+ }; -+ ov106xx_ti954_des1ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep1>; -+ }; -+ }; -+ }; -+ -+ ov106xx@6 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x66>; -+ -+ port@0 { -+ ov106xx_in6: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin6ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep2>; -+ }; -+ ov106xx_ti964_des1ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep2>; -+ }; -+ }; -+ }; -+ -+ ov106xx@7 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x67>; -+ -+ port@0 { -+ ov106xx_in7: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin7ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep3>; -+ }; -+ ov106xx_ti964_des1ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep3>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB964 @ 0x3a */ -+ ti964-ti9x3@1 { -+ compatible = "ti,ti964-ti9x3"; -+ reg = <0x3a>; -+ gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>; -+ ti,sensor_delay = <350>; -+ ti,links = <4>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "coax"; -+ -+ port@0 { -+ ti964_des1ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ ti964_des1ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ ti964_des1ep2: endpoint@2 { -+ ti9x3-addr = <0x0e>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in6>; -+ }; -+ ti964_des1ep3: endpoint@3 { -+ ti9x3-addr = <0x0f>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in7>; -+ }; -+ }; -+ port@1 { -+ ti964_csi2ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB954 @ 0x38 */ -+ ti954-ti9x3@1 { -+ compatible = "ti,ti954-ti9x3"; -+ reg = <0x38>; -+ gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>; -+ ti,sensor_delay = <350>; -+ ti,links = <2>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "coax"; -+ -+ port@0 { -+ ti954_des1ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ ti954_des1ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ }; -+ port@1 { -+ ti954_csi2ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+ -+ /* MAX9286 @ 0x2a */ -+ max9286-max9271@1 { -+ compatible = "maxim,max9286-max9271"; -+ reg = <0x2a>; -+ maxim,sensor_delay = <350>; -+ maxim,links = <4>; -+ maxim,lanes = <4>; -+ maxim,resetb-gpio = <1>; -+ maxim,fsync-mode = "automatic"; -+ maxim,timeout = <100>; -+ -+ port@0 { -+ max9286_des1ep0: endpoint@0 { -+ max9271-addr = <0x50>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ max9286_des1ep1: endpoint@1 { -+ max9271-addr = <0x51>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ max9286_des1ep2: endpoint@2 { -+ max9271-addr = <0x52>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in6>; -+ }; -+ max9286_des1ep3: endpoint@3 { -+ max9271-addr = <0x53>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in7>; -+ }; -+ }; -+ port@1 { -+ max9286_csi2ep0: endpoint { -+ csi-rate = <700>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+ }; -+ -+ i2c@6 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <6>; -+ /* Slot B (CN11) */ -+ -+ video_b_ext0: pca9535@27 { -+ compatible = "nxp,pca9535"; -+ reg = <0x27>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_b_des_cfg1 { -+ gpio-hog; -+ gpios = <5 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B cfg1"; -+ }; -+ video_b_des_cfg0 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B cfg0"; -+ }; -+ video_b_pwr_shdn { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR_SHDN"; -+ }; -+ video_b_cam_pwr0 { -+ gpio-hog; -+ gpios = <12 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR0"; -+ }; -+ video_b_cam_pwr1 { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR1"; -+ }; -+ video_b_cam_pwr2 { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR2"; -+ }; -+ video_b_cam_pwr3 { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR3"; -+ }; -+ video_b_des_shdn { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B DES_SHDN"; -+ }; -+ video_b_des_led { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-B led"; -+ }; -+ }; -+ -+ video_b_ext1: max7325@5c { -+ compatible = "maxim,max7325"; -+ reg = <0x5c>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_b_des_cfg2 { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-B cfg2"; -+ }; -+ video_b_des_cfg1 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-B cfg1"; -+ }; -+ video_b_des_cfg0 { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-B cfg0"; -+ }; -+ video_b_pwr_shdn { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR_SHDN"; -+ }; -+ video_b_cam_pwr0 { -+ gpio-hog; -+ gpios = <8 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR0"; -+ }; -+ video_b_cam_pwr1 { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR1"; -+ }; -+ video_b_cam_pwr3 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR3"; -+ }; -+ }; -+ }; -+ -+ i2c@7 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <7>; -+ /* Slot A (CN10) */ -+ -+ video_a_ext0: pca9535@26 { -+ compatible = "nxp,pca9535"; -+ reg = <0x26>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_a_des_cfg1 { -+ gpio-hog; -+ gpios = <5 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A cfg1"; -+ }; -+ video_a_des_cfg0 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A cfg0"; -+ }; -+ video_a_pwr_shdn { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR_SHDN"; -+ }; -+ video_a_cam_pwr0 { -+ gpio-hog; -+ gpios = <12 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR0"; -+ }; -+ video_a_cam_pwr1 { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR1"; -+ }; -+ video_a_cam_pwr2 { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR2"; -+ }; -+ video_a_cam_pwr3 { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR3"; -+ }; -+ video_a_des_shdn { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A DES_SHDN"; -+ }; -+ video_a_des_led { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-A led"; -+ }; -+ }; -+ -+ video_a_ext1: max7325@5c { -+ compatible = "maxim,max7325"; -+ reg = <0x5c>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_a_des_cfg2 { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-A cfg2"; -+ }; -+ video_a_des_cfg1 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-A cfg1"; -+ }; -+ video_a_des_cfg0 { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-A cfg0"; -+ }; -+ video_a_pwr_shdn { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR_SHDN"; -+ }; -+ video_a_cam_pwr0 { -+ gpio-hog; -+ gpios = <8 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR0"; -+ }; -+ video_a_cam_pwr1 { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR1"; -+ }; -+ video_a_cam_pwr3 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR3"; -+ }; -+ }; -+ }; -+ }; -+}; -+ -+&pcie_bus_clk { -+ clock-frequency = <100000000>; -+ status = "okay"; -+}; -+ -+&pciec0 { -+ status = "okay"; -+}; -+ -+&pciec1 { -+ status = "okay"; -+}; -+ -+&vin0 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin0ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ }; -+ port@1 { -+ csi0ep0: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin0_max9286_des0ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep0>; -+ }; -+ vin0_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; -+ }; -+ vin0_ti954_des0ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep0>; -+ }; -+ }; -+ }; -+}; -+ -+&vin1 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin1ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <1>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ }; -+ port@1 { -+ csi0ep1: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin1_max9286_des0ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep1>; -+ }; -+ vin1_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; -+ }; -+ vin1_ti954_des0ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep1>; -+ }; -+ }; -+ }; -+}; -+ -+&vin2 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin2ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <2>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ }; -+ port@1 { -+ csi0ep2: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin2_max9286_des0ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep2>; -+ }; -+ vin2_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; -+ }; -+ }; -+ }; -+}; -+ -+&vin3 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin3ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <3>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ csi0ep3: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin3_max9286_des0ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep3>; -+ }; -+ vin3_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; -+ }; -+ }; -+ }; -+}; -+ -+&vin4 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin4ep0: endpoint { -+ csi,select = "csi41"; -+ virtual,channel = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep0: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin4_max9286_des1ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep0>; -+ }; -+ vin4_ti964_des1ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep0>; -+ }; -+ vin4_ti954_des1ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep0>; -+ }; -+ }; -+ }; -+}; -+ -+&vin5 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin5ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <1>; -+ remote-endpoint = <&ov106xx_in5>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep1: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin5_max9286_des1ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep1>; -+ }; -+ vin5_ti964_des1ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep1>; -+ }; -+ vin5_ti954_des1ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep1>; -+ }; -+ }; -+ }; -+}; -+ -+&vin6 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin6ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <2>; -+ remote-endpoint = <&ov106xx_in6>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep2: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin6_max9286_des1ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep2>; -+ }; -+ vin6_ti964_des1ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep2>; -+ }; -+ }; -+ }; -+}; -+ -+&vin7 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin7ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <3>; -+ remote-endpoint = <&ov106xx_in7>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep3: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin7_max9286_des1ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep3>; -+ }; -+ vin7_ti964_des1ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep3>; -+ }; -+ }; -+ }; -+}; -+ -+&csi2_40 { -+ status = "okay"; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "ycbcr422"; -+ receive,vc = <0>; -+ }; -+ csi2_vc1 { -+ data,type = "ycbcr422"; -+ receive,vc = <1>; -+ }; -+ csi2_vc2 { -+ data,type = "ycbcr422"; -+ receive,vc = <2>; -+ }; -+ csi2_vc3 { -+ data,type = "ycbcr422"; -+ receive,vc = <3>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_40_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ csi-rate = <300>; -+ }; -+ }; -+}; -+ -+&csi2_41 { -+ status = "okay"; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "ycbcr422"; -+ receive,vc = <0>; -+ }; -+ csi2_vc1 { -+ data,type = "ycbcr422"; -+ receive,vc = <1>; -+ }; -+ csi2_vc2 { -+ data,type = "ycbcr422"; -+ receive,vc = <2>; -+ }; -+ csi2_vc3 { -+ data,type = "ycbcr422"; -+ receive,vc = <3>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_41_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ csi-rate = <300>; -+ }; -+ }; -+}; -+ -+&rcar_sound { -+ pinctrl-0 = <&sound_clk_pins>; -+ -+ /* Multi DAI */ -+ #sound-dai-cells = <1>; -+ -+ rcar_sound,dai { -+ dai0 { -+ playback = <&ssi7>; -+ capture = <&ssi8>; -+ }; -+ -+ dai1 { -+ playback = <&ssi0 &src0 &dvc0>; -+ capture = <&ssi1 &src1 &dvc1>; -+ }; -+ -+ dai2 { -+ capture = <&ssi6>; -+ }; -+ }; -+}; -+ -+&sdhi3 { -+ pinctrl-0 = <&sdhi3_pins_3v3>; -+ pinctrl-names = "default"; -+ -+ vmmc-supply = <&wlan_en>; -+ vqmmc-supply = <&vccq_sdhi3>; -+ keep-power-in-suspend; -+ enable-sdio-wakeup; -+ bus-width = <4>; -+ no-1-8-v; -+ non-removable; -+ cap-power-off-card; -+ max-frequency = <26000000>; -+ status = "okay"; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ wlcore: wlcore@2 { -+ compatible = "ti,wl1837"; -+ reg = <2>; -+ interrupt-parent = <&gpio1>; -+ interrupts = <25 IRQ_TYPE_EDGE_RISING>; -+ }; -+}; -+ -+&usb2_phy0 { -+ pinctrl-0 = <&usb0_pins>; -+ pinctrl-names = "default"; -+ -+ status = "okay"; -+}; -+ -+&hsusb { -+ status = "okay"; -+}; -+ -+&ehci0 { -+ status = "okay"; -+}; -+ -+&ohci0 { -+ status = "okay"; -+}; -+ -+&xhci0 { -+ status = "okay"; -+}; -+ -+&msiof1 { -+ status = "disabled"; -+}; -+ -+&can0 { -+ pinctrl-0 = <&can0_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ -+ renesas,can-clock-select = <0x0>; -+}; -+ -+&can1 { -+ pinctrl-0 = <&can1_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ -+ renesas,can-clock-select = <0x0>; -+}; -+ -+&canfd { -+ pinctrl-0 = <&canfd0_pins &canfd1_pins>; -+ pinctrl-names = "default"; -+ status = "disabled"; -+ -+ channel0 { -+ status = "okay"; -+ }; -+ -+ channel1 { -+ status = "okay"; -+ }; -+}; -+ -+/* uncomment to enable CN48 on VIN4 */ -+//#include "ulcb-kf-rpi.dtsi" -+/* uncomment to enable CN47: SD on SDHI3 */ -+//#include "ulcb-kf-sd3.dtsi" -diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-rpi.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-rpi.dtsi -new file mode 100644 -index 0000000..d3b4ece ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/ulcb-kf-rpi.dtsi -@@ -0,0 +1,75 @@ -+/* -+ * Device Tree Source for the H3ULCB Kingfisher board: -+ * this adding conflicting resource on VIN4 for Raspberry Pi camera -+ * -+ * Copyright (C) 2017 Renesas Electronics Corp. -+ * Copyright (C) 2017 Cogent Embedded, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+&i2cswitch4 { -+ i2c@4 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <4>; -+ -+ rpi_camera: ov5647@36 { -+ compatible = "ovti,ov5647"; -+ reg = <0x36>; -+ -+ port@0 { -+ rpi_camera_in: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2>; -+ remote-endpoint = <&vin4ep0>; -+ }; -+ }; -+ }; -+ }; -+}; -+ -+&vin4 { -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin4ep0: endpoint { -+ csi,select = "csi20"; -+ virtual,channel = <0>; -+ remote-endpoint = <&rpi_camera_in>; -+ data-lanes = <1 2>; -+ }; -+ }; -+ port@1 { -+ csi2ep0: endpoint { -+ remote-endpoint = <&csi2_20_ep>; -+ }; -+ }; -+ }; -+}; -+ -+&csi2_20 { -+ status = "okay"; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "raw8"; -+ receive,vc = <0>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_20_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2>; -+ csi-rate = <280>; -+ }; -+ }; -+}; -diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-sd3.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-sd3.dtsi -new file mode 100644 -index 0000000..ef481d3 ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/ulcb-kf-sd3.dtsi -@@ -0,0 +1,33 @@ -+/* -+ * Device Tree Source for the H3/M3ULCB Kingfisher board: -+ * this overrides WIFI in favour SD on SDHI3 -+ * -+ * Copyright (C) 2017 Renesas Electronics Corp. -+ * Copyright (C) 2017 Cogent Embedded, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+&sdio_switch { -+ regulator-name = "sd_on"; -+ enable-active-high; -+}; -+ -+&sdhi3 { -+ /delete-property/non-removable; -+ /delete-property/cap-power-off-card; -+ /delete-property/keep-power-in-suspend; -+ /delete-property/enable-sdio-wakeup; -+ /delete-property/sd-uhs-sdr104; -+ -+ vmmc-supply = <&vcc_sdhi3>; -+ max-frequency = <46000000>; -+ cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; -+ wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; -+}; -+ -+&wlcore { -+ status = "disabled"; -+}; --- -1.9.1 - diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0035-arm64-dts-r8a7796-salvator-x-view-add-ADAS-board.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0035-arm64-dts-r8a7796-salvator-x-view-add-ADAS-board.patch deleted file mode 100644 index e067e58..0000000 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0035-arm64-dts-r8a7796-salvator-x-view-add-ADAS-board.patch +++ /dev/null @@ -1,353 +0,0 @@ -From 782e569e0b0e252b03fdaecae2e6f7c3267a4bcd Mon Sep 17 00:00:00 2001 -From: Vladimir Barinov <vladimir.barinov@cogentembedded.com> -Date: Mon, 17 Apr 2017 19:12:29 +0300 -Subject: [PATCH] arm64: dts: r8a7796-salvator-x-view: add ADAS board - -Salvator-X.View board on R8A7796 SoC - -Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> ---- - arch/arm64/boot/dts/renesas/Makefile | 1 + - .../boot/dts/renesas/r8a7796-salvator-x-view.dts | 318 +++++++++++++++++++++ - 2 files changed, 319 insertions(+) - create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-salvator-x-view.dts - -diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile -index 49ddbd1..52bbef2 100644 ---- a/arch/arm64/boot/dts/renesas/Makefile -+++ b/arch/arm64/boot/dts/renesas/Makefile -@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb - dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-view.dtb - dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-had-alfa.dtb r8a7795-es1-h3ulcb-had-beta.dtb - dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-kf.dtb r8a7795-es1-h3ulcb-kf-v1.dtb -+dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x-view.dtb - - always := $(dtb-y) - clean-files := *.dtb -diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x-view.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x-view.dts -new file mode 100644 -index 0000000..cc6866c ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x-view.dts -@@ -0,0 +1,318 @@ -+/* -+ * Device Tree Source for the Salvator-X.View board -+ * -+ * Copyright (C) 2016-2017 Renesas Electronics Corp. -+ * Copyright (C) 2016-2017 Cogent Embedded, Inc -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+#include "r8a7796-salvator-x.dts" -+ -+/ { -+ model = "Renesas Salvator-X.View board based on r8a7796"; -+}; -+ -+&pfc { -+ can0_pins: can0 { -+ groups = "can0_data_a"; -+ function = "can0"; -+ }; -+ -+ can1_pins: can1 { -+ groups = "can1_data"; -+ function = "can1"; -+ }; -+}; -+ -+&i2c4 { -+ /delete-node/hdmi-in@34; -+ /delete-node/composite-in@70; -+ -+ ov106xx@0 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x60>; -+ -+ port@0 { -+ ov106xx_in0: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin0ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep0>; -+ }; -+ }; -+ }; -+ -+ ov106xx@1 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x61>; -+ -+ port@0 { -+ ov106xx_in1: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin1ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep1>; -+ }; -+ }; -+ }; -+ -+ ov106xx@2 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x62>; -+ -+ port@0 { -+ ov106xx_in2: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin2ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep2>; -+ }; -+ }; -+ }; -+ -+ ov106xx@3 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x63>; -+ -+ port@0 { -+ ov106xx_in3: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin3ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_des0ep3: endpoint { -+ remote-endpoint = <&max9286_des0ep3>; -+ }; -+ }; -+ }; -+ -+ max9286-max9271@0 { -+ compatible = "maxim,max9286-max9271"; -+ reg = <0x4c>; -+ gpios = <&gpio6 30 GPIO_ACTIVE_LOW>; -+ maxim,sensor_delay = <0>; -+ maxim,links = <4>; -+ maxim,lanes = <4>; -+ maxim,resetb-gpio = <1>; -+ maxim,fsync-mode = "automatic"; -+ maxim,timeout = <100>; -+ maxim,i2c-quirk = <0x6c>; -+ -+ port@0 { -+ max9286_des0ep0: endpoint@0 { -+ max9271-addr = <0x50>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ max9286_des0ep1: endpoint@1 { -+ max9271-addr = <0x51>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ max9286_des0ep2: endpoint@2 { -+ max9271-addr = <0x52>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ max9286_des0ep3: endpoint@3 { -+ max9271-addr = <0x53>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ max9286_csi0ep0: endpoint { -+ csi-rate = <700>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+}; -+ -+&vin0 { -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin0ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ }; -+ port@1 { -+ csi0ep0: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin0_max9286_des0ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep0>; -+ }; -+ }; -+ }; -+}; -+ -+&vin1 { -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin1ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <1>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ }; -+ port@1 { -+ csi0ep1: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin1_max9286_des0ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep1>; -+ }; -+ }; -+ }; -+}; -+ -+&vin2 { -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin2ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <2>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ }; -+ port@1 { -+ csi0ep2: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin2_max9286_des0ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep2>; -+ }; -+ }; -+ }; -+}; -+ -+&vin3 { -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin3ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <3>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ csi0ep3: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin3_max9286_des0ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep3>; -+ }; -+ }; -+ }; -+}; -+ -+&vin4 { -+ status = "disabled"; -+}; -+ -+&vin5 { -+ status = "disabled"; -+}; -+ -+&vin6 { -+ status = "disabled"; -+}; -+ -+&vin7 { -+ status = "disabled"; -+}; -+ -+&csi2_20 { -+ status = "disabled"; -+ /delete-node/ports; -+}; -+ -+&csi2_40 { -+ /delete-node/ports; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "ycbcr422"; -+ receive,vc = <0>; -+ }; -+ csi2_vc1 { -+ data,type = "ycbcr422"; -+ receive,vc = <1>; -+ }; -+ csi2_vc2 { -+ data,type = "ycbcr422"; -+ receive,vc = <2>; -+ }; -+ csi2_vc3 { -+ data,type = "ycbcr422"; -+ receive,vc = <3>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_40_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ csi-rate = <300>; -+ }; -+ }; -+}; -+ -+&can0 { -+ pinctrl-0 = <&can0_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+}; -+ -+&can1 { -+ pinctrl-0 = <&can1_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+}; --- -1.9.1 - diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0036-arm64-dts-r8a7796-m3ulcb-view-add-ADAS-board.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0036-arm64-dts-r8a7796-m3ulcb-view-add-ADAS-board.patch deleted file mode 100644 index 9117b99..0000000 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0036-arm64-dts-r8a7796-m3ulcb-view-add-ADAS-board.patch +++ /dev/null @@ -1,322 +0,0 @@ -From 51c5d0d6f36c1d049afc542130ac8186c12e3a46 Mon Sep 17 00:00:00 2001 -From: Vladimir Barinov <vladimir.barinov@cogentembedded.com> -Date: Wed, 4 Jan 2017 10:37:23 +0300 -Subject: [PATCH] arm64: dts: r8a7796-m3ulcb-view: add ADAS board - -M3ULCB.View board on R8A7796 SoC - -Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> ---- - arch/arm64/boot/dts/renesas/Makefile | 1 + - .../arm64/boot/dts/renesas/r8a7796-m3ulcb-view.dts | 287 +++++++++++++++++++++ - 2 files changed, 288 insertions(+) - create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-view.dts - -diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile -index 52bbef2..06207e3 100644 ---- a/arch/arm64/boot/dts/renesas/Makefile -+++ b/arch/arm64/boot/dts/renesas/Makefile -@@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x-view.dtb - dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-had-alfa.dtb r8a7795-es1-h3ulcb-had-beta.dtb - dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-kf.dtb r8a7795-es1-h3ulcb-kf-v1.dtb - dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x-view.dtb -+dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-view.dtb - - always := $(dtb-y) - clean-files := *.dtb -diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-view.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-view.dts -new file mode 100644 -index 0000000..1ac0041 ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-view.dts -@@ -0,0 +1,287 @@ -+/* -+ * Device Tree Source for the M3ULCB.View board on r8a7796 -+ * -+ * Copyright (C) 2016-2017 Renesas Electronics Corp. -+ * Copyright (C) 2016-2017 Cogent Embedded, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+#include "r8a7796-m3ulcb.dts" -+ -+/ { -+ model = "Renesas M3ULCB.View board based on r8a7796"; -+}; -+ -+&i2c4 { -+ ov106xx@0 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x60>; -+ -+ port@0 { -+ ov106xx_in0: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin0ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep0>; -+ }; -+ }; -+ }; -+ -+ ov106xx@1 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x61>; -+ -+ port@0 { -+ ov106xx_in1: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin1ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep1>; -+ }; -+ }; -+ }; -+ -+ ov106xx@2 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x62>; -+ -+ port@0 { -+ ov106xx_in2: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin2ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep2>; -+ }; -+ }; -+ }; -+ -+ ov106xx@3 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x63>; -+ -+ port@0 { -+ ov106xx_in3: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin3ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_des0ep3: endpoint { -+ remote-endpoint = <&max9286_des0ep3>; -+ }; -+ }; -+ }; -+ -+ max9286-max9271@0 { -+ compatible = "maxim,max9286-max9271"; -+ reg = <0x4c>; -+ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; -+ maxim,sensor_delay = <0>; -+ maxim,links = <4>; -+ maxim,lanes = <4>; -+ maxim,resetb-gpio = <1>; -+ maxim,fsync-mode = "automatic"; -+ maxim,timeout = <100>; -+ maxim,i2c-quirk = <0x6c>; -+ -+ port@0 { -+ max9286_des0ep0: endpoint@0 { -+ max9271-addr = <0x50>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ max9286_des0ep1: endpoint@1 { -+ max9271-addr = <0x51>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ max9286_des0ep2: endpoint@2 { -+ max9271-addr = <0x52>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ max9286_des0ep3: endpoint@3 { -+ max9271-addr = <0x53>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ max9286_csi0ep0: endpoint { -+ csi-rate = <700>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+}; -+ -+&pcie_bus_clk { -+ clock-frequency = <100000000>; -+ status = "okay"; -+}; -+ -+&pciec1 { -+ status = "okay"; -+}; -+ -+&vin0 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin0ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ }; -+ port@1 { -+ csi0ep0: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin0_max9286_des0ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep0>; -+ }; -+ }; -+ }; -+}; -+ -+&vin1 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin1ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <1>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ }; -+ port@1 { -+ csi0ep1: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin1_max9286_des0ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep1>; -+ }; -+ }; -+ }; -+}; -+ -+&vin2 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin2ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <2>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ }; -+ port@1 { -+ csi0ep2: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin2_max9286_des0ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep2>; -+ }; -+ }; -+ }; -+}; -+ -+&vin3 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin3ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <3>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ csi0ep3: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin3_max9286_des0ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep3>; -+ }; -+ }; -+ }; -+}; -+ -+&csi2_40 { -+ status = "okay"; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "ycbcr422"; -+ receive,vc = <0>; -+ }; -+ csi2_vc1 { -+ data,type = "ycbcr422"; -+ receive,vc = <1>; -+ }; -+ csi2_vc2 { -+ data,type = "ycbcr422"; -+ receive,vc = <2>; -+ }; -+ csi2_vc3 { -+ data,type = "ycbcr422"; -+ receive,vc = <3>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_40_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ csi-rate = <300>; -+ }; -+ }; -+}; --- -1.9.1 - diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0037-arm64-dts-r8a7796-m3ulcb-kf-add-ADAS-board.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0037-arm64-dts-r8a7796-m3ulcb-kf-add-ADAS-board.patch deleted file mode 100644 index be77003..0000000 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0037-arm64-dts-r8a7796-m3ulcb-kf-add-ADAS-board.patch +++ /dev/null @@ -1,1724 +0,0 @@ -From dffbc2287b4fd0c54b49fd4bb41d7f06c23e20b6 Mon Sep 17 00:00:00 2001 -From: Vladimir Barinov <vladimir.barinov@cogentembedded.com> -Date: Wed, 4 Jan 2017 10:37:23 +0300 -Subject: [PATCH] arm64: dts: r8a7796-m3ulcb-kf: add ADAS board - -Kingfisher board on R8A7796 - -Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> ---- - arch/arm64/boot/dts/renesas/Makefile | 1 + - .../boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts | 443 +++++++ - arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts | 1238 ++++++++++++++++++++ - 3 files changed, 1682 insertions(+) - create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts - create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts - -diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile -index 5d99267..e41b5b3 100644 ---- a/arch/arm64/boot/dts/renesas/Makefile -+++ b/arch/arm64/boot/dts/renesas/Makefile -@@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-had-alfa.dtb r8a7795-es1-h3ulcb - dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-kf.dtb r8a7795-es1-h3ulcb-kf-v1.dtb - dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x-view.dtb - dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-view.dtb -+dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb r8a7796-m3ulcb-kf-v1.dtb - - always := $(dtb-y) - clean-files := *.dtb -diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts -new file mode 100644 -index 0000000..ff0ec0f ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts -@@ -0,0 +1,443 @@ -+/* -+ * Device Tree Source for the M3ULCB Kingfisher V1 board -+ * -+ * Copyright (C) 2017 Renesas Electronics Corp. -+ * Copyright (C) 2017 Cogent Embedded, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+#include "r8a7796-m3ulcb-kf.dts" -+ -+/ { -+ model = "Renesas M3ULCB Kingfisher V1 board based on r8a7796"; -+ -+ aliases { -+ serial1 = &hscif0; -+ serial2 = &hscif1; -+ serial3 = &scif1; -+ }; -+ -+ wlan_en: regulator@4 { -+ compatible = "regulator-fixed"; -+ regulator-name = "wlan-en-regulator"; -+ -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ gpio = <&gpio_ext_74 4 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ }; -+ -+ codec_en_reg: regulator@6 { -+ compatible = "regulator-fixed"; -+ regulator-name = "codec-en-regulator"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ gpio = <&gpio_ext_74 15 0>; -+ -+ /* delay - CHECK */ -+ startup-delay-us = <70000>; -+ enable-active-high; -+ }; -+ -+ amp_en_reg: regulator@7 { -+ compatible = "regulator-fixed"; -+ regulator-name = "amp-en-regulator"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ gpio = <&gpio_ext_74 0 0>; -+ -+ startup-delay-us = <0>; -+ enable-active-high; -+ }; -+ -+ /delete-node/regulator@8; -+ -+ sdio_switch: regulator@9 { -+ compatible = "regulator-fixed"; -+ regulator-name = "wifi_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_74 5 0>; -+ enable-active-low; -+ regulator-always-on; -+ }; -+ -+ /delete-node/regulator@10; -+ -+ radio_switch: regulator@11 { -+ compatible = "regulator-fixed"; -+ regulator-name = "radio_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_74 13 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ -+ kim { -+ compatible = "kim"; -+ nshutdown_gpio = <343>; /* gpio_ext_74 pin 3 */ -+ /* serial1 */ -+ dev_name = "/dev/ttySC1"; -+ flow_cntrl = <1>; -+ /* int div 8 hscif@26.6666656MHz */ -+ baud_rate = <3333332>; -+ }; -+ -+ hdmi-out { -+ compatible = "hdmi-connector"; -+ type = "a"; -+ -+ port { -+ hdmi_con: endpoint { -+ remote-endpoint = <&adv7513_out>; -+ }; -+ }; -+ }; -+}; -+ -+&pfc { -+ /delete-node/hscif4; -+ -+ scif1_pins: scif1 { -+ groups = "scif1_data_b"; -+ function = "scif1"; -+ }; -+ -+ hscif0_pins: hscif0 { -+ groups = "hscif0_data", "hscif0_ctrl"; -+ function = "hscif0"; -+ }; -+ -+ hscif1_pins: hscif1 { -+ groups = "hscif1_data_a", "hscif1_ctrl_a"; -+ function = "hscif1"; -+ }; -+ -+ du_pins: du { -+ groups = "du_rgb888", "du_sync", "du_clk_out_0", "du_disp"; -+ function = "du"; -+ }; -+}; -+ -+&du { -+ pinctrl-0 = <&du_pins>; -+ pinctrl-names = "default"; -+ -+ ports { -+ port@0 { -+ endpoint { -+ remote-endpoint = <&adv7513_in>; -+ }; -+ }; -+ port@1 { -+ endpoint { -+ remote-endpoint = <&rcar_dw_hdmi0_in>; -+ }; -+ }; -+ }; -+}; -+ -+&gpio0 { -+ /delete-node/video_a_irq; -+ /delete-node/video_b_irq; -+ /delete-node/gpioext_2_20_irq; -+}; -+ -+&gpio1 { -+ /delete-node/gpioext_2_21_irq; -+ /delete-node/wifi_irq; -+}; -+ -+&gpio2 { -+ bl_pwm { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "BL PWM 100%"; -+ }; -+}; -+ -+&gpio5 { -+ /delete-node/touch_irq; -+ /delete-node/bt_strap; -+ -+ /* V1 has h/w bug with swapped RTS and CTS on BT interface */ -+ /* Ignore these pins */ -+ hscif0_cts { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "hscif0 CTS"; -+ }; -+ -+ hscif0_rts { -+ gpio-hog; -+ gpios = <16 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "hscif0 RTS"; -+ }; -+}; -+ -+&gpio7 { -+ /delete-node/gpioext_2_21_irq; -+}; -+ -+&scif1 { -+ pinctrl-0 = <&scif1_pins>; -+ pinctrl-names = "default"; -+ -+ status = "okay"; -+}; -+ -+&hscif0 { -+ pinctrl-0 = <&hscif0_pins>; -+ pinctrl-names = "default"; -+ ctsrts; -+ -+ status = "okay"; -+}; -+ -+&hscif1 { -+ pinctrl-0 = <&hscif1_pins>; -+ pinctrl-names = "default"; -+ -+ status = "okay"; -+}; -+ -+&hscif4 { -+ /delete-property/pinctrl-0; -+ /delete-property/pinctrl-names; -+ -+ status = "disabled"; -+}; -+ -+&i2c2 { -+ /delete-node/pca9535@20; -+ /delete-node/pca9535@21; -+ -+ gpio_ext_74: pca9539@74 { -+ compatible = "nxp,pca9539"; -+ reg = <0x74>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio6>; -+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>; -+ -+ hub_pwen { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "HUB pwen"; -+ }; -+ hub_rst { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "HUB rst"; -+ }; -+ otg_offvbus { -+ gpio-hog; -+ gpios = <8 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "OTG off VBUSn"; -+ }; -+ otg_extlpn { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "OTG EXTLPn"; -+ }; -+ otg_stat1 { -+ gpio-hog; -+ gpios = <10 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "OTG Stat1"; -+ }; -+ otg_stat2 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "OTG Stat2"; -+ }; -+ }; -+ -+ gpio_ext_75: pca9539@75 { -+ compatible = "nxp,pca9539"; -+ reg = <0x75>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio6>; -+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>; -+ -+ gps_rst { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "GPS rst"; -+ }; -+ fpdl_shdn { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "FPDLink shdn"; -+ }; -+ }; -+}; -+ -+&i2cswitch2 { -+ reg = <0x71>; -+ reset-gpios= <&gpio5 3 GPIO_ACTIVE_LOW>; -+ -+ i2c@4 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <4>; -+ -+ hdmi@3d { -+ compatible = "adi,adv7511w"; -+ reg = <0x3d>; -+ interrupt-parent = <&gpio2>; -+ interrupts = <0 IRQ_TYPE_EDGE_BOTH>; -+ pd-gpios = <&gpio_ext_75 5 GPIO_ACTIVE_LOW>; -+ -+ adi,input-depth = <8>; -+ adi,input-colorspace = "rgb"; -+ adi,input-clock = "1x"; -+ adi,input-style = <1>; -+ adi,input-justification = "evenly"; -+ adi,clock-delay = <1200>; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ reg = <0>; -+ adv7513_in: endpoint { -+ remote-endpoint = <&du_out_rgb>; -+ }; -+ }; -+ -+ port@1 { -+ reg = <1>; -+ adv7513_out: endpoint { -+ remote-endpoint = <&hdmi_con>; -+ }; -+ }; -+ }; -+ }; -+ }; -+}; -+ -+&i2c4 { -+ /delete-node/pca9535@21; -+ -+ gpio_ext_76: pca9539@76 { -+ compatible = "nxp,pca9539"; -+ reg = <0x76>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio7>; -+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>; -+ -+ port_b_a0 { -+ gpio-hog; -+ gpios = <0 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-B A0"; -+ }; -+ port_b_a1 { -+ gpio-hog; -+ gpios = <1 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B A1"; -+ }; -+ port_a_a0 { -+ gpio-hog; -+ gpios = <2 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-A A0"; -+ }; -+ port_a_a1 { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A A1"; -+ }; -+ /* pin 12 - CAM_CLK */ -+ rpi_cam_io_1 { -+ gpio-hog; -+ gpios = <10 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "RaspB_IO1"; -+ }; -+ /* pin 11 - CAM_GPIO - assume pwdn */ -+ rpi_cam_io_0 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "RaspB_IO0"; -+ }; -+ /* 0 - FPDLink output, 1 - LVDS output */ -+ lvds_vs_fpdl { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "LVDS switch"; -+ }; -+ }; -+ -+ gpio_ext_77: pca9539@77 { -+ compatible = "nxp,pca9539"; -+ reg = <0x77>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio5>; -+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>; -+ -+ mpcie_wake { -+ gpio-hog; -+ gpios = <0 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "mPCIe WAKE#"; -+ }; -+ mpcie_wdisable { -+ gpio-hog; -+ gpios = <1 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "mPCIe W_DISABLE"; -+ }; -+ mpcie_clreq { -+ gpio-hog; -+ gpios = <2 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "mPCIe CLKREQ#"; -+ }; -+ mpcie_ovc { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "mPCIe OVC"; -+ }; -+ }; -+}; -+ -+&i2cswitch4 { -+ reg = <0x71>; -+ reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>; -+}; -+ -+&wlcore { -+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>; -+}; -diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts -new file mode 100644 -index 0000000..39eab1f ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts -@@ -0,0 +1,1238 @@ -+/* -+ * Device Tree Source for the M3ULCB Kingfisher board on r8a7796 -+ * -+ * Copyright (C) 2017 Renesas Electronics Corp. -+ * Copyright (C) 2017 Cogent Embedded, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+#include "r8a7796-m3ulcb.dts" -+ -+/ { -+ model = "Renesas M3ULCB Kingfisher board based on r8a7796"; -+ -+ aliases { -+ serial1 = &hscif4; -+ }; -+ -+ snd_clk: snd_clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <24576000>; -+ clock-output-names = "scki"; -+ }; -+ -+ wlan_en: regulator@4 { -+ compatible = "regulator-fixed"; -+ regulator-name = "wlan-en-regulator"; -+ -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ gpio = <&gpio_ext_20 4 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ }; -+ -+ vcc_sdhi3: regulator@41 { -+ compatible = "regulator-fixed"; -+ -+ regulator-name = "SDHI3 Vcc"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ -+ vccq_sdhi3: regulator@5 { -+ compatible = "regulator-fixed"; -+ -+ regulator-name = "SDHI3 VccQ"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ }; -+ -+ codec_en_reg: regulator@6 { -+ compatible = "regulator-fixed"; -+ regulator-name = "codec-en-regulator"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ gpio = <&gpio_ext_20 15 0>; -+ -+ /* delay - CHECK */ -+ startup-delay-us = <70000>; -+ enable-active-high; -+ }; -+ -+ amp_en_reg: regulator@7 { -+ compatible = "regulator-fixed"; -+ regulator-name = "amp-en-regulator"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ gpio = <&gpio_ext_20 0 0>; -+ -+ startup-delay-us = <0>; -+ enable-active-high; -+ }; -+ -+ lvds_switch: regulator@8 { -+ compatible = "regulator-fixed"; -+ regulator-name = "lvds_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio1 24 0>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ -+ sdio_switch: regulator@9 { -+ compatible = "regulator-fixed"; -+ regulator-name = "wifi_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_20 5 0>; -+ enable-active-low; -+ regulator-always-on; -+ }; -+ -+ sound_switch: regulator@10 { -+ compatible = "regulator-fixed"; -+ regulator-name = "pcm3168a_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_21 5 0>; -+ enable-active-low; -+ regulator-always-on; -+ }; -+ -+ radio_switch: regulator@11 { -+ compatible = "regulator-fixed"; -+ regulator-name = "radio_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_20 13 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ -+ kim { -+ compatible = "kim"; -+ nshutdown_gpio = <343>; /* pca9535@i2c2.0x20 pin 3 */ -+ /* serial1 */ -+ dev_name = "/dev/ttySC1"; -+ flow_cntrl = <1>; -+ /* int div 8 hscif@26.6666656MHz */ -+ baud_rate = <3333332>; -+ }; -+ -+ btwilink { -+ compatible = "btwilink"; -+ }; -+ -+ sound_ext: sound@0 { -+ pinctrl-0 = <&sound_0_pins>; -+ pinctrl-names = "default"; -+ compatible = "simple-audio-card"; -+ -+ simple-audio-card,format = "left_j"; -+ simple-audio-card,name = "pcm3168a"; -+ -+ simple-audio-card,bitclock-master = <&sound_ext_master>; -+ simple-audio-card,frame-master = <&sound_ext_master>; -+ sound_ext_master: simple-audio-card,cpu@0 { -+ sound-dai = <&rcar_sound 0>; -+ dai-tdm-slot-num = <8>; -+ dai-tdm-slot-width = <32>; -+ }; -+ -+ simple-audio-card,codec@0 { -+ sound-dai = <&pcm3168a>; -+ dai-tdm-slot-num = <8>; -+ dai-tdm-slot-width = <32>; -+ system-clock-frequency = <24576000>; -+ }; -+ }; -+ -+ /delete-node/sound; -+ -+ rsnd_ak4613: sound@1 { -+ pinctrl-0 = <&sound_1_pins>; -+ pinctrl-names = "default"; -+ compatible = "simple-audio-card"; -+ -+ simple-audio-card,format = "left_j"; -+ simple-audio-card,name = "ak4613"; -+ -+ simple-audio-card,bitclock-master = <&sndcpu>; -+ simple-audio-card,frame-master = <&sndcpu>; -+ -+ sndcpu: simple-audio-card,cpu@1 { -+ sound-dai = <&rcar_sound 1>; -+ }; -+ -+ sndcodec: simple-audio-card,codec@1 { -+ sound-dai = <&ak4613>; -+ }; -+ }; -+ -+ sound_radio: sound@2 { -+ pinctrl-0 = <&sound_2_pins>; -+ pinctrl-names = "default"; -+ compatible = "simple-audio-card"; -+ -+ simple-audio-card,format = "i2s"; -+ simple-audio-card,name = "radio"; -+ -+ simple-audio-card,bitclock-master = <&sound_radio_master>; -+ simple-audio-card,frame-master = <&sound_radio_master>; -+ simple-audio-card,cpu@2 { -+ sound-dai = <&rcar_sound 2>; -+ }; -+ -+ sound_radio_master: simple-audio-card,codec@2 { -+ sound-dai = <&radio>; -+ system-clock-frequency = <12288000>; -+ }; -+ }; -+ -+ lvds-encoder { -+ compatible = "thine,thc63lvdm83d"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ port@0 { -+ reg = <0>; -+ lvds_enc_in: endpoint { -+ remote-endpoint = <&du_out_lvds0>; -+ }; -+ }; -+ port@1 { -+ reg = <1>; -+ lvds_enc_out: endpoint { -+ remote-endpoint = <&lvds_in>; -+ }; -+ }; -+ }; -+ }; -+ -+ lvds { -+ compatible = "lvds-connector"; -+ -+ width-mm = <210>; -+ height-mm = <158>; -+ -+ panel-timing { -+ /* 1280x800 @60Hz */ -+ clock-frequency = <65000000>; -+ hactive = <1280>; -+ vactive = <800>; -+ hsync-len = <40>; -+ hfront-porch = <80>; -+ hback-porch = <40>; -+ vfront-porch = <14>; -+ vback-porch = <14>; -+ vsync-len = <4>; -+ }; -+ -+ port { -+ lvds_in: endpoint { -+ remote-endpoint = <&lvds_enc_out>; -+ }; -+ }; -+ }; -+ -+ radio: si468x@0 { -+ compatible = "si,si468x-pcm"; -+ status = "okay"; -+ -+ #sound-dai-cells = <0>; -+ }; -+}; -+ -+&pfc { -+ hscif4_pins: hscif4 { -+ groups = "hscif4_data_a", "hscif4_ctrl"; -+ function = "hscif4"; -+ }; -+ -+ sdhi3_pins_3v3: sd3_3v3 { -+ groups = "sdhi3_data4", "sdhi3_ctrl"; -+ function = "sdhi3"; -+ power-source = <3300>; -+ }; -+ -+ sound_0_pins: sound0 { -+ groups = "ssi78_ctrl", "ssi7_data", "ssi8_data"; -+ function = "ssi"; -+ }; -+ -+ sound_1_pins: sound1 { -+ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; -+ function = "ssi"; -+ }; -+ -+ sound_2_pins: sound2 { -+ groups = "ssi6_ctrl", "ssi6_data"; -+ function = "ssi"; -+ }; -+ -+ usb0_pins: usb0 { -+ groups = "usb0"; -+ function = "usb0"; -+ }; -+ -+ can0_pins: can0 { -+ groups = "can0_data_a"; -+ function = "can0"; -+ }; -+ -+ can1_pins: can1 { -+ groups = "can1_data"; -+ function = "can1"; -+ }; -+ -+ canfd0_pins: canfd0 { -+ groups = "canfd0_data_a"; -+ function = "canfd0"; -+ }; -+ -+ canfd1_pins: canfd1 { -+ groups = "canfd1_data"; -+ function = "canfd1"; -+ }; -+}; -+ -+&gpio0 { -+ video_a_irq { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-A irq"; -+ }; -+ -+ video_b_irq { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-B irq"; -+ }; -+ -+ gpioext_2_20_irq { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "0x20@i2c2 irq"; -+ }; -+}; -+ -+&gpio1 { -+ gpioext_2_21_irq { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "0x21@i2c2 irq"; -+ }; -+ -+ wifi_irq { -+ gpio-hog; -+ gpios = <25 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "wifi irq"; -+ }; -+}; -+ -+&gpio5 { -+ touch_irq { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "touch irq"; -+ }; -+ -+ /* From TI forum */ -+ /* BT_AUD_OUT should be pulled low when WL_EN is activated. */ -+ /* in case it isn't, wilink8 ends up in one of the test modes that introduces various issues */ -+ bt_strap { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "BT strap pin"; -+ }; -+}; -+ -+&gpio7 { -+ gpioext_2_21_irq { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "0x21@i2c4 irq"; -+ }; -+}; -+ -+&hscif4 { -+ pinctrl-0 = <&hscif4_pins>; -+ pinctrl-names = "default"; -+ ctsrts; -+ -+ status = "okay"; -+}; -+ -+&i2c2 { -+ clock-frequency = <400000>; -+ -+ gpio_ext_20: pca9535@20 { -+ compatible = "nxp,pca9535"; -+ reg = <0x20>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio0>; -+ interrupts = <15 IRQ_TYPE_EDGE_FALLING>; -+ }; -+ -+ gpio_ext_21: pca9535@21 { -+ compatible = "nxp,pca9535"; -+ reg = <0x21>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio1>; -+ interrupts = <15 IRQ_TYPE_EDGE_FALLING>; -+ }; -+ -+ i2cswitch2: pca9548@74 { -+ compatible = "nxp,pca9548"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x74>; -+ reset-gpios = <&gpio6 5 GPIO_ACTIVE_LOW>; -+ -+ i2c@0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0>; -+ /* BCM node(s) */ -+ }; -+ -+ i2c@1 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <1>; -+ /* USB3.0 HUB node(s) */ -+ }; -+ -+ i2c@2 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <2>; -+ /* Power amp node(s) */ -+ }; -+ -+ i2c@3 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <3>; -+ /* Radio node(s) */ -+ }; -+ -+ i2c@4 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <4>; -+ /* A2B node(s) */ -+ }; -+ -+ i2c@5 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <5>; -+ /* PCIe node(s) */ -+ }; -+ -+ i2c@6 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <6>; -+ /* LVDS display node(s) */ -+ -+ polytouch: edt-ft5x06@38 { -+ compatible = "edt,edt-ft5x06"; -+ reg = <0x38>; -+ interrupt-parent = <&gpio5>; -+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>; -+ }; -+ }; -+ -+ i2c@7 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <7>; -+ /* Audio, GPS and Gyro node(s) */ -+ -+ pcm3168a: audio-codec@44 { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm3168a"; -+ reg = <0x44>; -+ clocks = <&snd_clk>; -+ clock-names = "scki"; -+ tdm; -+ VDD1-supply = <&codec_en_reg>; -+ VDD2-supply = <&codec_en_reg>; -+ VCCAD1-supply = <&codec_en_reg>; -+ VCCAD2-supply = <&codec_en_reg>; -+ VCCDA1-supply = <&_en_reg>; -+ VCCDA2-supply = <&_en_reg>; -+ }; -+ -+ lsm9ds0_acc_mag@1d { -+ compatible = "st,lsm9ds0_acc_mag"; -+ reg = <0x1d>; -+ }; -+ -+ lsm9ds0_gyr@6b { -+ compatible = "st,lsm9ds0-gyro"; -+ reg = <0x6b>; -+ }; -+ -+ /* GPS@ 0x42 */ -+ }; -+ }; -+}; -+ -+&i2c4 { -+ gpio_ext_22: pca9535@21 { -+ compatible = "nxp,pca9535"; -+ reg = <0x22>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio7>; -+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>; -+ -+ /* pin 12 - CAM_CLK */ -+ rpi_cam_io_1 { -+ gpio-hog; -+ gpios = <10 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "RaspB_IO1"; -+ }; -+ /* pin 11 - CAM_GPIO - assume pwdn */ -+ rpi_cam_io_0 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "RaspB_IO0"; -+ }; -+ }; -+ -+ i2cswitch4: pca9548@74 { -+ compatible = "nxp,pca9548"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x74>; -+ reset-gpios= <&gpio6 21 GPIO_ACTIVE_LOW>; -+ -+ i2c@0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0>; -+ /* SAM node(s) */ -+ }; -+ -+ i2c@1 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <1>; -+ /* Slot A (CN10) */ -+ -+ ov106xx@0 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x60>; -+ -+ port@0 { -+ ov106xx_in0: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin0ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep0>; -+ }; -+ ov106xx_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; -+ }; -+ ov106xx_ti954_des0ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep0>; -+ }; -+ }; -+ }; -+ -+ ov106xx@1 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x61>; -+ -+ port@0 { -+ ov106xx_in1: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin1ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep1>; -+ }; -+ ov106xx_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; -+ }; -+ ov106xx_ti954_des0ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep1>; -+ }; -+ }; -+ }; -+ -+ ov106xx@2 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x62>; -+ -+ port@0 { -+ ov106xx_in2: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin2ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep2>; -+ }; -+ ov106xx_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; -+ }; -+ }; -+ }; -+ -+ ov106xx@3 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x63>; -+ -+ port@0 { -+ ov106xx_in3: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin3ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep3>; -+ }; -+ ov106xx_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB964 @ 0x3a */ -+ ti964-ti9x3@0 { -+ compatible = "ti,ti964-ti9x3"; -+ reg = <0x3a>; -+ gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; -+ ti,sensor_delay = <350>; -+ ti,links = <4>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "coax"; -+ -+ port@0 { -+ ti964_des0ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ ti964_des0ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ ti964_des0ep2: endpoint@2 { -+ ti9x3-addr = <0x0e>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ ti964_des0ep3: endpoint@3 { -+ ti9x3-addr = <0x0f>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ ti964_csi0ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB954 @ 0x38 */ -+ ti954-ti9x3@0 { -+ compatible = "ti,ti954-ti9x3"; -+ reg = <0x38>; -+ gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; -+ ti,sensor_delay = <350>; -+ ti,links = <2>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "coax"; -+ -+ port@0 { -+ ti954_des0ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ ti954_des0ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ }; -+ port@1 { -+ ti954_csi0ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ -+ /* MAX9286 @ 0x2a */ -+ max9286-max9271@0 { -+ compatible = "maxim,max9286-max9271"; -+ reg = <0x2a>; -+ maxim,sensor_delay = <350>; -+ maxim,links = <4>; -+ maxim,lanes = <4>; -+ maxim,resetb-gpio = <1>; -+ maxim,fsync-mode = "automatic"; -+ maxim,timeout = <100>; -+ -+ port@0 { -+ max9286_des0ep0: endpoint@0 { -+ max9271-addr = <0x50>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ max9286_des0ep1: endpoint@1 { -+ max9271-addr = <0x51>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ max9286_des0ep2: endpoint@2 { -+ max9271-addr = <0x52>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ max9286_des0ep3: endpoint@3 { -+ max9271-addr = <0x53>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ max9286_csi0ep0: endpoint { -+ csi-rate = <700>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ }; -+ -+ i2c@3 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <3>; -+ /* MOST node(s) */ -+ }; -+ -+ i2c@4 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <4>; -+ -+ rpi_camera: ov5647@36 { -+ compatible = "ovti,ov5647"; -+ reg = <0x36>; -+ -+ port@0 { -+ rpi_camera_in: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2>; -+ remote-endpoint = <&vin4ep0>; -+ }; -+ }; -+ }; -+ }; -+ -+ i2c@5 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <5>; -+ /* CMOS camera node(s) */ -+ }; -+ -+ i2c@7 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <7>; -+ /* Slot A (CN10) */ -+ -+ video_a_ext0: pca9535@26 { -+ compatible = "nxp,pca9535"; -+ reg = <0x26>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_a_des_cfg1 { -+ gpio-hog; -+ gpios = <5 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A cfg1"; -+ }; -+ video_a_des_cfg0 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A cfg0"; -+ }; -+ video_a_pwr_shdn { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR_SHDN"; -+ }; -+ video_a_cam_pwr0 { -+ gpio-hog; -+ gpios = <12 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR0"; -+ }; -+ video_a_cam_pwr1 { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR1"; -+ }; -+ video_a_cam_pwr2 { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR2"; -+ }; -+ video_a_cam_pwr3 { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR3"; -+ }; -+ video_a_des_shdn { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A DES_SHDN"; -+ }; -+ video_a_des_led { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-A led"; -+ }; -+ }; -+ -+ video_a_ext1: max7325@5c { -+ compatible = "maxim,max7325"; -+ reg = <0x5c>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_a_des_cfg2 { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-A cfg2"; -+ }; -+ video_a_des_cfg1 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-A cfg1"; -+ }; -+ video_a_des_cfg0 { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-A cfg0"; -+ }; -+ video_a_pwr_shdn { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR_SHDN"; -+ }; -+ video_a_cam_pwr0 { -+ gpio-hog; -+ gpios = <8 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR0"; -+ }; -+ video_a_cam_pwr1 { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR1"; -+ }; -+ video_a_cam_pwr3 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR3"; -+ }; -+ }; -+ }; -+ }; -+}; -+ -+&pcie_bus_clk { -+ clock-frequency = <100000000>; -+ status = "okay"; -+}; -+ -+&pciec0 { -+ status = "okay"; -+}; -+ -+&pciec1 { -+ status = "okay"; -+}; -+ -+&vin0 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin0ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ }; -+ port@1 { -+ csi0ep0: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin0_max9286_des0ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep0>; -+ }; -+ vin0_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; -+ }; -+ vin0_ti954_des0ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep0>; -+ }; -+ }; -+ }; -+}; -+ -+&vin1 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin1ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <1>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ }; -+ port@1 { -+ csi0ep1: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin1_max9286_des0ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep1>; -+ }; -+ vin1_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; -+ }; -+ vin1_ti954_des0ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep1>; -+ }; -+ }; -+ }; -+}; -+ -+&vin2 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin2ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <2>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ }; -+ port@1 { -+ csi0ep2: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin2_max9286_des0ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep2>; -+ }; -+ vin2_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; -+ }; -+ }; -+ }; -+}; -+ -+&vin3 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin3ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <3>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ csi0ep3: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin3_max9286_des0ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep3>; -+ }; -+ vin3_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; -+ }; -+ }; -+ }; -+}; -+ -+&vin4 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin4ep0: endpoint { -+ csi,select = "csi20"; -+ virtual,channel = <0>; -+ remote-endpoint = <&rpi_camera_in>; -+ data-lanes = <1 2>; -+ }; -+ }; -+ port@1 { -+ csi2ep0: endpoint { -+ remote-endpoint = <&csi2_20_ep>; -+ }; -+ }; -+ }; -+}; -+ -+&csi2_40 { -+ status = "okay"; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "ycbcr422"; -+ receive,vc = <0>; -+ }; -+ csi2_vc1 { -+ data,type = "ycbcr422"; -+ receive,vc = <1>; -+ }; -+ csi2_vc2 { -+ data,type = "ycbcr422"; -+ receive,vc = <2>; -+ }; -+ csi2_vc3 { -+ data,type = "ycbcr422"; -+ receive,vc = <3>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_40_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ csi-rate = <300>; -+ }; -+ }; -+}; -+ -+&csi2_20 { -+ status = "okay"; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "raw8"; -+ receive,vc = <0>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_20_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2>; -+ csi-rate = <280>; -+ }; -+ }; -+}; -+ -+&rcar_sound { -+ pinctrl-0 = <&sound_clk_pins>; -+ -+ /* Multi DAI */ -+ #sound-dai-cells = <1>; -+ -+ rcar_sound,dai { -+ dai0 { -+ playback = <&ssi7>; -+ capture = <&ssi8>; -+ }; -+ -+ dai1 { -+ playback = <&ssi0 &src0 &dvc0>; -+ capture = <&ssi1 &src1 &dvc1>; -+ }; -+ -+ dai2 { -+ capture = <&ssi6>; -+ }; -+ }; -+}; -+ -+&sdhi3 { -+ pinctrl-0 = <&sdhi3_pins_3v3>; -+ pinctrl-names = "default"; -+ -+ vmmc-supply = <&wlan_en>; -+ vqmmc-supply = <&vccq_sdhi3>; -+ keep-power-in-suspend; -+ enable-sdio-wakeup; -+ bus-width = <4>; -+ no-1-8-v; -+ non-removable; -+ cap-power-off-card; -+ max-frequency = <26000000>; -+ status = "okay"; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ wlcore: wlcore@2 { -+ compatible = "ti,wl1837"; -+ reg = <2>; -+ interrupt-parent = <&gpio1>; -+ interrupts = <25 IRQ_TYPE_EDGE_RISING>; -+ }; -+}; -+ -+&usb2_phy0 { -+ pinctrl-0 = <&usb0_pins>; -+ pinctrl-names = "default"; -+ -+ status = "okay"; -+}; -+ -+&hsusb { -+ status = "okay"; -+}; -+ -+&ehci0 { -+ status = "okay"; -+}; -+ -+&ohci0 { -+ status = "okay"; -+}; -+ -+&xhci0 { -+ status = "okay"; -+}; -+ -+&msiof1 { -+ status = "disabled"; -+}; -+ -+&can0 { -+ pinctrl-0 = <&can0_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ -+ renesas,can-clock-select = <0x0>; -+}; -+ -+&can1 { -+ pinctrl-0 = <&can1_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ -+ renesas,can-clock-select = <0x0>; -+}; -+ -+&canfd { -+ pinctrl-0 = <&canfd0_pins &canfd1_pins>; -+ pinctrl-names = "default"; -+ status = "disabled"; -+ -+ channel0 { -+ status = "okay"; -+ }; -+ -+ channel1 { -+ status = "okay"; -+ }; -+}; -+ -+/* uncomment to enable CN47: SD on SDHI3 */ -+//#include "ulcb-kf-sd3.dtsi" --- -1.9.1 - diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0038-arm64-dts-r8a7795-salvator-x-view-add-ADAS-board.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0038-arm64-dts-r8a7795-salvator-x-view-add-ADAS-board.patch deleted file mode 100644 index d78b009..0000000 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0038-arm64-dts-r8a7795-salvator-x-view-add-ADAS-board.patch +++ /dev/null @@ -1,587 +0,0 @@ -From c5d2ada2089db7db1a059af37f371f6e2df213f4 Mon Sep 17 00:00:00 2001 -From: Vladimir Barinov <vladimir.barinov@cogentembedded.com> -Date: Wed, 4 Jan 2017 10:37:23 +0300 -Subject: [PATCH] arm64: dts: r8a7795-salvator-x-view: add ADAS board - -Salvator-X.View board on R8A7795 SoC - -Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> ---- - arch/arm64/boot/dts/renesas/Makefile | 3 + - .../dts/renesas/r8a7795-salvator-x-view.dts | 552 +++++++++++++++++++++ - 2 files changed, 555 insertions(+) - create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-salvator-x-view.dts - -diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile -index 32fb4d9..2a00759 100644 ---- a/arch/arm64/boot/dts/renesas/Makefile -+++ b/arch/arm64/boot/dts/renesas/Makefile -@@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb r8a7795-es1-h3ulcb.dtb - dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x-view.dtb - dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-view.dtb - dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb r8a7796-m3ulcb-kf-v1.dtb -+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x-view.dtb - - always := $(dtb-y) - clean-files := *.dtb -diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x-view.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x-view.dts -new file mode 100644 -index 0000000..3f3d66a ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x-view.dts -@@ -0,0 +1,552 @@ -+/* -+ * Device Tree Source for the Salvator-X.View board -+ * -+ * Copyright (C) 2016-2017 Renesas Electronics Corp. -+ * Copyright (C) 2015-2017 Cogent Embedded, Inc -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+#include "r8a7795-salvator-x.dts" -+ -+/ { -+ model = "Renesas Salvator-X.View board based on r8a7795"; -+}; -+ -+&pfc { -+ can0_pins: can0 { -+ groups = "can0_data_a"; -+ function = "can0"; -+ }; -+ -+ can1_pins: can1 { -+ groups = "can1_data"; -+ function = "can1"; -+ }; -+}; -+ -+&i2c4 { -+ /delete-node/hdmi-in@34; -+ /delete-node/composite-in@70; -+ -+ ov106xx@0 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x60>; -+ -+ port@0 { -+ ov106xx_in0: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin0ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep0>; -+ }; -+ }; -+ }; -+ -+ ov106xx@1 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x61>; -+ -+ port@0 { -+ ov106xx_in1: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin1ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep1>; -+ }; -+ }; -+ }; -+ -+ ov106xx@2 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x62>; -+ -+ port@0 { -+ ov106xx_in2: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin2ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep2>; -+ }; -+ }; -+ }; -+ -+ ov106xx@3 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x63>; -+ -+ port@0 { -+ ov106xx_in3: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin3ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_des0ep3: endpoint { -+ remote-endpoint = <&max9286_des0ep3>; -+ }; -+ }; -+ }; -+ -+ ov106xx@4 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x64>; -+ -+ port@0 { -+ ov106xx_in4: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin4ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep0>; -+ }; -+ }; -+ }; -+ -+ ov106xx@5 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x65>; -+ -+ port@0 { -+ ov106xx_in5: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin5ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep1>; -+ }; -+ }; -+ }; -+ -+ ov106xx@6 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x66>; -+ -+ port@0 { -+ ov106xx_in6: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin6ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep2>; -+ }; -+ }; -+ }; -+ -+ ov106xx@7 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x67>; -+ -+ port@0 { -+ ov106xx_in7: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin7ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_des1ep3: endpoint { -+ remote-endpoint = <&max9286_des1ep3>; -+ }; -+ }; -+ }; -+ -+ max9286-max9271@0 { -+ compatible = "maxim,max9286-max9271"; -+ reg = <0x4c>; -+ gpios = <&gpio6 30 GPIO_ACTIVE_LOW>; -+ maxim,sensor_delay = <0>; -+ maxim,links = <4>; -+ maxim,lanes = <4>; -+ maxim,resetb-gpio = <1>; -+ maxim,fsync-mode = "automatic"; -+ maxim,timeout = <100>; -+ maxim,i2c-quirk = <0x6c>; -+ -+ port@0 { -+ max9286_des0ep0: endpoint@0 { -+ max9271-addr = <0x50>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ max9286_des0ep1: endpoint@1 { -+ max9271-addr = <0x51>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ max9286_des0ep2: endpoint@2 { -+ max9271-addr = <0x52>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ max9286_des0ep3: endpoint@3 { -+ max9271-addr = <0x53>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ max9286_csi0ep0: endpoint { -+ csi-rate = <700>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ -+ max9286-max9271@1 { -+ compatible = "maxim,max9286-max9271"; -+ reg = <0x6c>; -+ maxim,sensor_delay = <0>; -+ maxim,links = <4>; -+ maxim,lanes = <4>; -+ maxim,resetb-gpio = <1>; -+ maxim,fsync-mode = "automatic"; -+ maxim,timeout = <100>; -+ -+ port@0 { -+ max9286_des1ep0: endpoint@0 { -+ max9271-addr = <0x54>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ max9286_des1ep1: endpoint@1 { -+ max9271-addr = <0x55>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ max9286_des1ep2: endpoint@2 { -+ max9271-addr = <0x56>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in6>; -+ }; -+ max9286_des1ep3: endpoint@3 { -+ max9271-addr = <0x57>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in7>; -+ }; -+ }; -+ port@1 { -+ max9286_csi2ep0: endpoint { -+ csi-rate = <700>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+}; -+ -+&vin0 { -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin0ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ }; -+ port@1 { -+ csi0ep0: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin0_max9286_des0ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep0>; -+ }; -+ }; -+ }; -+}; -+ -+&vin1 { -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin1ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <1>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ }; -+ port@1 { -+ csi0ep1: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin1_max9286_des0ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep1>; -+ }; -+ }; -+ }; -+}; -+ -+&vin2 { -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin2ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <2>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ }; -+ port@1 { -+ csi0ep2: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin2_max9286_des0ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep2>; -+ }; -+ }; -+ }; -+}; -+ -+&vin3 { -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin3ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <3>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ csi0ep3: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin3_max9286_des0ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep3>; -+ }; -+ }; -+ }; -+}; -+ -+&vin4 { -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin4ep0: endpoint { -+ csi,select = "csi41"; -+ virtual,channel = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep0: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin4_max9286_des1ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep0>; -+ }; -+ }; -+ }; -+}; -+ -+&vin5 { -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin5ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <1>; -+ remote-endpoint = <&ov106xx_in5>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep1: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin5_max9286_des1ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep1>; -+ }; -+ }; -+ }; -+}; -+ -+&vin6 { -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin6ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <2>; -+ remote-endpoint = <&ov106xx_in6>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep2: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin6_max9286_des1ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep2>; -+ }; -+ }; -+ }; -+}; -+ -+&vin7 { -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin7ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <3>; -+ remote-endpoint = <&ov106xx_in7>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep3: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin7_max9286_des1ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep3>; -+ }; -+ }; -+ }; -+}; -+ -+&csi2_20 { -+ status = "disabled"; -+ /delete-node/ports; -+}; -+ -+&csi2_40 { -+ /delete-node/ports; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "ycbcr422"; -+ receive,vc = <0>; -+ }; -+ csi2_vc1 { -+ data,type = "ycbcr422"; -+ receive,vc = <1>; -+ }; -+ csi2_vc2 { -+ data,type = "ycbcr422"; -+ receive,vc = <2>; -+ }; -+ csi2_vc3 { -+ data,type = "ycbcr422"; -+ receive,vc = <3>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_40_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ csi-rate = <300>; -+ }; -+ }; -+}; -+ -+&csi2_41 { -+ status = "okay"; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "ycbcr422"; -+ receive,vc = <0>; -+ }; -+ csi2_vc1 { -+ data,type = "ycbcr422"; -+ receive,vc = <1>; -+ }; -+ csi2_vc2 { -+ data,type = "ycbcr422"; -+ receive,vc = <2>; -+ }; -+ csi2_vc3 { -+ data,type = "ycbcr422"; -+ receive,vc = <3>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_41_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ csi-rate = <300>; -+ }; -+ }; -+}; -+ -+&can0 { -+ pinctrl-0 = <&can0_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+}; -+ -+&can1 { -+ pinctrl-0 = <&can1_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+}; --- -1.9.1 - diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0039-arm64-dts-r8a7795-h3ulcb-view-add-ADAS-board.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0039-arm64-dts-r8a7795-h3ulcb-view-add-ADAS-board.patch deleted file mode 100644 index 69cab3b..0000000 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0039-arm64-dts-r8a7795-h3ulcb-view-add-ADAS-board.patch +++ /dev/null @@ -1,581 +0,0 @@ -From 24d2ada2089db7db1a059af37f371f6e2df213f4 Mon Sep 17 00:00:00 2001 -From: Vladimir Barinov <vladimir.barinov@cogentembedded.com> -Date: Wed, 4 Jan 2017 10:37:23 +0300 -Subject: [PATCH] arm64: dts: r8a7795-h3ulcb-view: add ADAS board - -H3ULCB.View board on R8A7795 SoC - -Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> ---- - arch/arm64/boot/dts/renesas/Makefile | 1 + - .../boot/dts/renesas/r8a7795-h3ulcb-view.dts | 546 +++++++++++++++++++++ - 2 files changed, 547 insertions(+) - create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-view.dts - -diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile -index 2a00759..43aa35d 100644 ---- a/arch/arm64/boot/dts/renesas/Makefile -+++ b/arch/arm64/boot/dts/renesas/Makefile -@@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb - dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-view.dtb - dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb r8a7796-m3ulcb-kf-v1.dtb - dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x-view.dtb -+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-view.dtb - - always := $(dtb-y) - clean-files := *.dtb -diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-view.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-view.dts -new file mode 100644 -index 0000000..de56fa4 ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-view.dts -@@ -0,0 +1,546 @@ -+/* -+ * Device Tree Source for the H3ULCB.View board -+ * -+ * Copyright (C) 2016-2017 Renesas Electronics Corp. -+ * Copyright (C) 2016-2017 Cogent Embedded, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+#include "r8a7795-h3ulcb.dts" -+ -+/ { -+ model = "Renesas H3ULCB.View board based on r8a7795"; -+}; -+ -+&i2c4 { -+ ov106xx@0 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x60>; -+ -+ port@0 { -+ ov106xx_in0: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin0ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep0>; -+ }; -+ }; -+ }; -+ -+ ov106xx@1 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x61>; -+ -+ port@0 { -+ ov106xx_in1: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin1ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep1>; -+ }; -+ }; -+ }; -+ -+ ov106xx@2 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x62>; -+ -+ port@0 { -+ ov106xx_in2: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin2ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep2>; -+ }; -+ }; -+ }; -+ -+ ov106xx@3 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x63>; -+ -+ port@0 { -+ ov106xx_in3: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin3ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_des0ep3: endpoint { -+ remote-endpoint = <&max9286_des0ep3>; -+ }; -+ }; -+ }; -+ -+ ov106xx@4 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x64>; -+ -+ port@0 { -+ ov106xx_in4: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin4ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep0>; -+ }; -+ }; -+ }; -+ -+ ov106xx@5 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x65>; -+ -+ port@0 { -+ ov106xx_in5: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin5ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep1>; -+ }; -+ }; -+ }; -+ -+ ov106xx@6 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x66>; -+ -+ port@0 { -+ ov106xx_in6: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin6ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep2>; -+ }; -+ }; -+ }; -+ -+ ov106xx@7 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x67>; -+ -+ port@0 { -+ ov106xx_in7: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin7ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_des1ep3: endpoint { -+ remote-endpoint = <&max9286_des1ep3>; -+ }; -+ }; -+ }; -+ -+ max9286-max9271@0 { -+ compatible = "maxim,max9286-max9271"; -+ reg = <0x4c>; -+ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; -+ maxim,sensor_delay = <0>; -+ maxim,links = <4>; -+ maxim,lanes = <4>; -+ maxim,resetb-gpio = <1>; -+ maxim,fsync-mode = "automatic"; -+ maxim,timeout = <100>; -+ maxim,i2c-quirk = <0x6c>; -+ -+ port@0 { -+ max9286_des0ep0: endpoint@0 { -+ max9271-addr = <0x50>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ max9286_des0ep1: endpoint@1 { -+ max9271-addr = <0x51>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ max9286_des0ep2: endpoint@2 { -+ max9271-addr = <0x52>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ max9286_des0ep3: endpoint@3 { -+ max9271-addr = <0x53>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ max9286_csi0ep0: endpoint { -+ csi-rate = <700>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ -+ max9286-max9271@1 { -+ compatible = "maxim,max9286-max9271"; -+ reg = <0x6c>; -+ gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; -+ maxim,sensor_delay = <0>; -+ maxim,links = <4>; -+ maxim,lanes = <4>; -+ maxim,resetb-gpio = <1>; -+ maxim,fsync-mode = "automatic"; -+ maxim,timeout = <100>; -+ -+ port@0 { -+ max9286_des1ep0: endpoint@0 { -+ max9271-addr = <0x54>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ max9286_des1ep1: endpoint@1 { -+ max9271-addr = <0x55>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ max9286_des1ep2: endpoint@2 { -+ max9271-addr = <0x56>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in6>; -+ }; -+ max9286_des1ep3: endpoint@3 { -+ max9271-addr = <0x57>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in7>; -+ }; -+ }; -+ port@1 { -+ max9286_csi2ep0: endpoint { -+ csi-rate = <700>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+}; -+ -+&pcie_bus_clk { -+ clock-frequency = <100000000>; -+ status = "okay"; -+}; -+ -+&pciec1 { -+ status = "okay"; -+}; -+ -+&vin0 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin0ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ }; -+ port@1 { -+ csi0ep0: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin0_max9286_des0ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep0>; -+ }; -+ }; -+ }; -+}; -+ -+&vin1 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin1ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <1>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ }; -+ port@1 { -+ csi0ep1: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin1_max9286_des0ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep1>; -+ }; -+ }; -+ }; -+}; -+ -+&vin2 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin2ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <2>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ }; -+ port@1 { -+ csi0ep2: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin2_max9286_des0ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep2>; -+ }; -+ }; -+ }; -+}; -+ -+&vin3 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin3ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <3>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ csi0ep3: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin3_max9286_des0ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep3>; -+ }; -+ }; -+ }; -+}; -+ -+&vin4 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin4ep0: endpoint { -+ csi,select = "csi41"; -+ virtual,channel = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep0: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin4_max9286_des1ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep0>; -+ }; -+ }; -+ }; -+}; -+ -+&vin5 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin5ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <1>; -+ remote-endpoint = <&ov106xx_in5>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep1: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin5_max9286_des1ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep1>; -+ }; -+ }; -+ }; -+}; -+ -+&vin6 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin6ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <2>; -+ remote-endpoint = <&ov106xx_in6>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep2: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin6_max9286_des1ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep2>; -+ }; -+ }; -+ }; -+}; -+ -+&vin7 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin7ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <3>; -+ remote-endpoint = <&ov106xx_in7>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep3: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin7_max9286_des1ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep3>; -+ }; -+ }; -+ }; -+}; -+ -+&csi2_40 { -+ status = "okay"; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "ycbcr422"; -+ receive,vc = <0>; -+ }; -+ csi2_vc1 { -+ data,type = "ycbcr422"; -+ receive,vc = <1>; -+ }; -+ csi2_vc2 { -+ data,type = "ycbcr422"; -+ receive,vc = <2>; -+ }; -+ csi2_vc3 { -+ data,type = "ycbcr422"; -+ receive,vc = <3>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_40_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ csi-rate = <300>; -+ }; -+ }; -+}; -+ -+&csi2_41 { -+ status = "okay"; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "ycbcr422"; -+ receive,vc = <0>; -+ }; -+ csi2_vc1 { -+ data,type = "ycbcr422"; -+ receive,vc = <1>; -+ }; -+ csi2_vc2 { -+ data,type = "ycbcr422"; -+ receive,vc = <2>; -+ }; -+ csi2_vc3 { -+ data,type = "ycbcr422"; -+ receive,vc = <3>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_41_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ csi-rate = <300>; -+ }; -+ }; -+}; --- -1.9.1 - diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-r8a7795-h3ulcb-had-add-ADAS-board.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-r8a7795-h3ulcb-had-add-ADAS-board.patch deleted file mode 100644 index 861acb0..0000000 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-r8a7795-h3ulcb-had-add-ADAS-board.patch +++ /dev/null @@ -1,315 +0,0 @@ -From 30240b74fe0b5c851127996328504e86a9fc4407 Mon Sep 17 00:00:00 2001 -From: Vladimir Barinov <vladimir.barinov@cogentembedded.com> -Date: Wed, 4 Jan 2017 10:41:48 +0300 -Subject: [PATCH] arm64: dts: r8a7795-h3ulcb-had: add ADAS board - -H3ULCB.HAD board on R8A7795 SoC - -Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> ---- - arch/arm64/boot/dts/renesas/Makefile | 1 + - .../boot/dts/renesas/r8a7795-h3ulcb-had-alfa.dts | 22 +++ - .../boot/dts/renesas/r8a7795-h3ulcb-had-beta.dts | 23 +++ - .../arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi | 218 +++++++++++++++++++++ - 4 files changed, 264 insertions(+) - create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-alfa.dts - create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-beta.dts - create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi - -diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile -index 387652e..9dad6dc 100644 ---- a/arch/arm64/boot/dts/renesas/Makefile -+++ b/arch/arm64/boot/dts/renesas/Makefile -@@ -14,6 +14,7 @@ dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-view.dtb - dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb r8a7796-m3ulcb-kf-v1.dtb - dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x-view.dtb - dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-view.dtb -+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-had-alfa.dtb r8a7795-h3ulcb-had-beta.dtb - - always := $(dtb-y) - clean-files := *.dtb -diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-alfa.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-alfa.dts -new file mode 100644 -index 0000000..ae115bd ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-alfa.dts -@@ -0,0 +1,22 @@ -+/* -+ * Device Tree Source for the H3ULCB.HAD board Alfa side -+ * -+ * Copyright (C) 2017 Renesas Electronics Corp. -+ * Copyright (C) 2017 Cogent Embedded, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+#include "r8a7795-h3ulcb-had.dtsi" -+ -+/ { -+ model = "Renesas H3ULCB.HAD board Alfa side based on r8a7795"; -+}; -+ -+&pciec0 { -+ status = "okay"; -+ -+ /* Root complex */ -+}; -diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-beta.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-beta.dts -new file mode 100644 -index 0000000..805067e ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-beta.dts -@@ -0,0 +1,23 @@ -+/* -+ * Device Tree Source for the H3ULCB.HAD board Beta side -+ * -+ * Copyright (C) 2017 Renesas Electronics Corp. -+ * Copyright (C) 2017 Cogent Embedded, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+#include "r8a7795-h3ulcb-had.dtsi" -+ -+/ { -+ model = "Renesas H3ULCB.HAD board Beta side based on r8a7795"; -+}; -+ -+&pciec0 { -+ status = "okay"; -+ -+ /* Endpoint */ -+ endpoint; -+}; -diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi -new file mode 100644 -index 0000000..d146938 ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi -@@ -0,0 +1,219 @@ -+/* -+ * Device Tree Source for the H3ULCB.HAD board on r8a7795 -+ * -+ * Copyright (C) 2016-2017 Renesas Electronics Corp. -+ * Copyright (C) 2016-2017 Cogent Embedded, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+/* -+ * MSIOF0 - /dev/spidev1.0 connected to FPGA ethernet switch (both sides) -+ * MSIOF1 - /dev/spidev2.0 connected to RH850 (sideA to CSIH1, sideB to CSIH0) -+ */ -+ -+#include "r8a7795-h3ulcb-view.dts" -+ -+/ { -+ model = "Renesas H3ULCB.HAD board based on r8a7795"; -+ -+ aliases { -+ serial1 = &scif1; -+ spi1 = &spi0_gpio; -+ spi2 = &spi1_gpio; -+ }; -+ -+ chosen { -+ stdout-path = "serial1:115200n8"; -+ }; -+ -+ spi0_gpio: spi_gpio@0 { -+ compatible = "spi-gpio"; -+ num-chipselects = <1>; -+ gpio-sck = <&gpio5 17 0>; -+ gpio-mosi = <&gpio5 20 0>; -+ gpio-miso = <&gpio5 22 0>; -+ cs-gpios = <&gpio5 19 0>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ spidev@0 { -+ compatible = "spi-gpio"; -+ reg = <0>; -+ spi-max-frequency = <2000000>; -+ spi-cpha; -+ spi-cpol; -+ }; -+ }; -+ -+ spi1_gpio: spi_gpio@1 { -+ compatible = "spi-gpio"; -+ num-chipselects = <1>; -+ gpio-sck = <&gpio6 8 0>; -+ gpio-mosi = <&gpio6 7 0>; -+ gpio-miso = <&gpio6 10 0>; -+ cs-gpios = <&gpio6 5 0>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ spidev@0 { -+ compatible = "spi-gpio"; -+ reg = <0>; -+ spi-max-frequency = <2000000>; -+ spi-cpha; -+ spi-cpol; -+ }; -+ }; -+ -+ hdmi1-out { -+ compatible = "hdmi-connector"; -+ type = "a"; -+ -+ port { -+ hdmi1_con: endpoint { -+ remote-endpoint = <&rcar_dw_hdmi1_out>; -+ }; -+ }; -+ }; -+}; -+ -+&du { -+ ports { -+ port@1 { -+ endpoint { -+ remote-endpoint = <&rcar_dw_hdmi0_in>; -+ }; -+ }; -+ port@2 { -+ endpoint { -+ remote-endpoint = <&rcar_dw_hdmi1_in>; -+ }; -+ }; -+ }; -+}; -+ -+&hdmi1 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ port@0 { -+ reg = <0>; -+ rcar_dw_hdmi1_in: endpoint { -+ remote-endpoint = <&du_out_hdmi1>; -+ }; -+ }; -+ port@1 { -+ reg = <1>; -+ rcar_dw_hdmi1_out: endpoint { -+ remote-endpoint = <&hdmi1_con>; -+ }; -+ }; -+ }; -+}; -+ -+&pfc { -+ scif1_pins: scif1 { -+ groups = "scif1_data_a"; -+ function = "scif1"; -+ }; -+ -+ msiof0_pins: spi1 { -+ groups = "msiof0_clk", "msiof0_rxd", "msiof0_txd", -+ "msiof0_ss1"; -+ function = "msiof0"; -+ }; -+ -+ msiof1_pins: spi2 { -+ groups = "msiof1_clk_a", "msiof1_rxd_a", "msiof1_txd_a", -+ "msiof1_ss1_a"; -+ function = "msiof1"; -+ }; -+ -+ sound_clk_pins: sound-clk { -+ groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a", -+ "audio_clkout_a" /*, "audio_clkout3_a"*/; -+ function = "audio_clk"; -+ }; -+ -+ usb31_pins: usb31 { -+ groups = "usb31"; -+ function = "usb31"; -+ }; -+ -+ can0_pins: can0 { -+ groups = "can0_data_a"; -+ function = "can0"; -+ }; -+ -+ canfd0_pins: canfd0 { -+ groups = "canfd0_data_a"; -+ function = "canfd0"; -+ }; -+}; -+ -+&scif1 { -+ pinctrl-0 = <&scif1_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+}; -+ -+&avb { -+ /delete-property/phy-handle; -+ /delete-property/phy-gpios; -+ /delete-node/ethernet-phy@0; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+}; -+ -+&msiof0 { -+ pinctrl-0 = <&msiof0_pins>; -+ pinctrl-names = "default"; -+ status = "disabled"; -+ cs-gpios = <&gpio5 19 0>; -+ -+ spidev@0 { -+ compatible = "renesas,sh-msiof"; -+ reg = <0>; -+ spi-max-frequency = <66666666>; -+ spi-cpha; -+ spi-cpol; -+ }; -+}; -+ -+&msiof1 { -+ status = "disabled"; -+ cs-gpios = <&gpio6 5 0>; -+}; -+ -+&can0 { -+ pinctrl-0 = <&can0_pins>; -+ pinctrl-names = "default"; -+ status = "disabled"; -+ -+ renesas,can-clock-select = <0x0>; -+ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH /* enable - shared with camera board */ -+ &gpio2 7 GPIO_ACTIVE_LOW /* standby */ -+ >; -+}; -+ -+&canfd { -+ pinctrl-0 = <&canfd0_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ -+ renesas,can-clock-select = <0x0>; -+ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH /* enable - shared with camera board */ -+ &gpio2 7 GPIO_ACTIVE_LOW /* standby */ -+ >; -+ -+ channel0 { -+ status = "okay"; -+ }; -+}; --- -1.9.1 - diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch new file mode 100644 index 0000000..6d7bb3b --- /dev/null +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch @@ -0,0 +1,13640 @@ +From 51718d8f768ba719a8a295e013e3456e13b70a98 Mon Sep 17 00:00:00 2001 +From: Vladimir Barinov <vladimir.barinov@cogentembedded.com> +Date: Fri, 14 Jul 2017 15:05:42 +0300 +Subject: [PATCH] arm64: dts: renesas: add ADAS boards + +Salvator-X.View board on R8A7795 ES1.x SoC +Salvator-X.View board on R8A7795 SoC +Salvator-X.View board on R8A7796 SoC +H3ULCB.View board on R8A7795 ES1.x SoC +H3ULCB.View board on R8A7795 SoC +M3ULCB.View board on R8A7796 SoC +H3ULCB.HAD board on R8A7795 ES1.x SoC +H3ULCB.HAD board on R8A7795 SoC +Kingfisher board on R8A7795 ES1.x SoC +Kingfisher board on R8A7795 SoC +Kingfisher board on R8A7796 SoC +Videobox board on R8A7795 ES1.x SoC +Videobox board on R8A7795 SoC + +Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> +--- + arch/arm64/boot/dts/renesas/Makefile | 14 + + .../dts/renesas/r8a7795-es1-h3ulcb-had-alfa.dts | 22 + + .../dts/renesas/r8a7795-es1-h3ulcb-had-beta.dts | 23 + + .../boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi | 225 +++ + .../boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts | 443 +++++ + .../boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts | 1655 ++++++++++++++++++ + .../boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts | 1787 ++++++++++++++++++++ + .../boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts | 546 ++++++ + .../dts/renesas/r8a7795-es1-salvator-x-view.dts | 552 ++++++ + .../boot/dts/renesas/r8a7795-h3ulcb-had-alfa.dts | 22 + + .../boot/dts/renesas/r8a7795-h3ulcb-had-beta.dts | 23 + + .../arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi | 219 +++ + .../boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts | 443 +++++ + arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts | 1651 ++++++++++++++++++ + arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts | 1787 ++++++++++++++++++++ + .../arm64/boot/dts/renesas/r8a7795-h3ulcb-view.dts | 546 ++++++ + .../boot/dts/renesas/r8a7795-salvator-x-view.dts | 552 ++++++ + .../boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts | 443 +++++ + arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts | 1238 ++++++++++++++ + .../arm64/boot/dts/renesas/r8a7796-m3ulcb-view.dts | 287 ++++ + .../boot/dts/renesas/r8a7796-salvator-x-view.dts | 318 ++++ + arch/arm64/boot/dts/renesas/ulcb-kf-rpi.dtsi | 75 + + arch/arm64/boot/dts/renesas/ulcb-kf-sd3.dtsi | 33 + + arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi | 515 ++++++ + 24 files changed, 13419 insertions(+) + create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-alfa.dts + create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-beta.dts + create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi + create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts + create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts + create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts + create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts + create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x-view.dts + create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-alfa.dts + create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-beta.dts + create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi + create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts + create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts + create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts + create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-view.dts + create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-salvator-x-view.dts + create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts + create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts + create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-view.dts + create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-salvator-x-view.dts + create mode 100644 arch/arm64/boot/dts/renesas/ulcb-kf-rpi.dtsi + create mode 100644 arch/arm64/boot/dts/renesas/ulcb-kf-sd3.dtsi + create mode 100644 arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi + +diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile +index 32fb4d9..c9b3e96 100644 +--- a/arch/arm64/boot/dts/renesas/Makefile ++++ b/arch/arm64/boot/dts/renesas/Makefile +@@ -4,5 +4,19 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb r8a7795-es1-h3ulcb.dtb + dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb + dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb + ++# ADAS boards ++dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x-view.dtb ++dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-view.dtb ++dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-had-alfa.dtb r8a7795-es1-h3ulcb-had-beta.dtb ++dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-kf.dtb r8a7795-es1-h3ulcb-kf-v1.dtb ++dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x-view.dtb ++dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-view.dtb ++dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb r8a7796-m3ulcb-kf-v1.dtb ++dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x-view.dtb ++dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-view.dtb ++dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-had-alfa.dtb r8a7795-h3ulcb-had-beta.dtb ++dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb r8a7795-h3ulcb-kf-v1.dtb ++dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-vb.dtb r8a7795-es1-h3ulcb-vb.dtb ++ + always := $(dtb-y) + clean-files := *.dtb +diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-alfa.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-alfa.dts +new file mode 100644 +index 0000000..6b13f07 +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-alfa.dts +@@ -0,0 +1,22 @@ ++/* ++ * Device Tree Source for the H3ULCB.HAD board Alfa side on r8a7795 ES1.x ++ * ++ * Copyright (C) 2017 Renesas Electronics Corp. ++ * Copyright (C) 2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++#include "r8a7795-es1-h3ulcb-had.dtsi" ++ ++/ { ++ model = "Renesas H3ULCB.HAD board Alfa side based on r8a7795"; ++}; ++ ++&pciec0 { ++ status = "okay"; ++ ++ /* Root complex */ ++}; +diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-beta.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-beta.dts +new file mode 100644 +index 0000000..2f8b274 +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-beta.dts +@@ -0,0 +1,23 @@ ++/* ++ * Device Tree Source for the H3ULCB.HAD board Beta side on r8a7795 ES1.x ++ * ++ * Copyright (C) 2017 Renesas Electronics Corp. ++ * Copyright (C) 2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++#include "r8a7795-es1-h3ulcb-had.dtsi" ++ ++/ { ++ model = "Renesas H3ULCB.HAD board Beta side based on r8a7795"; ++}; ++ ++&pciec0 { ++ status = "okay"; ++ ++ /* Endpoint */ ++ endpoint; ++}; +diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi +new file mode 100644 +index 0000000..d50ff7a +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi +@@ -0,0 +1,225 @@ ++/* ++ * Device Tree Source for the H3ULCB.HAD board on r8a7795 ES1.x ++ * ++ * Copyright (C) 2016-2017 Renesas Electronics Corp. ++ * Copyright (C) 2016-2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++/* ++ * MSIOF0 - /dev/spidev1.0 connected to FPGA ethernet switch (both sides) ++ * MSIOF1 - /dev/spidev2.0 connected to RH850 (sideA to CSIH1, sideB to CSIH0) ++ */ ++ ++#include "r8a7795-es1-h3ulcb-view.dts" ++ ++/ { ++ model = "Renesas H3ULCB.HAD board based on r8a7795"; ++ ++ aliases { ++ serial1 = &scif1; ++ spi1 = &spi0_gpio; ++ spi2 = &spi1_gpio; ++ }; ++ ++ chosen { ++ stdout-path = "serial1:115200n8"; ++ }; ++ ++ spi0_gpio: spi_gpio@0 { ++ compatible = "spi-gpio"; ++ num-chipselects = <1>; ++ gpio-sck = <&gpio5 17 0>; ++ gpio-mosi = <&gpio5 20 0>; ++ gpio-miso = <&gpio5 22 0>; ++ cs-gpios = <&gpio5 19 0>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ spidev@0 { ++ compatible = "spi-gpio"; ++ reg = <0>; ++ spi-max-frequency = <2000000>; ++ spi-cpha; ++ spi-cpol; ++ }; ++ }; ++ ++ spi1_gpio: spi_gpio@1 { ++ compatible = "spi-gpio"; ++ num-chipselects = <1>; ++ gpio-sck = <&gpio6 8 0>; ++ gpio-mosi = <&gpio6 7 0>; ++ gpio-miso = <&gpio6 10 0>; ++ cs-gpios = <&gpio6 5 0>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ spidev@0 { ++ compatible = "spi-gpio"; ++ reg = <0>; ++ spi-max-frequency = <2000000>; ++ spi-cpha; ++ spi-cpol; ++ }; ++ }; ++ ++ hdmi1-out { ++ compatible = "hdmi-connector"; ++ type = "a"; ++ ++ port { ++ hdmi1_con: endpoint { ++ remote-endpoint = <&rcar_dw_hdmi1_out>; ++ }; ++ }; ++ }; ++}; ++ ++&du { ++ ports { ++ port@1 { ++ endpoint { ++ remote-endpoint = <&rcar_dw_hdmi0_in>; ++ }; ++ }; ++ port@2 { ++ endpoint { ++ remote-endpoint = <&rcar_dw_hdmi1_in>; ++ }; ++ }; ++ }; ++}; ++ ++&hdmi1 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ port@0 { ++ reg = <0>; ++ rcar_dw_hdmi1_in: endpoint { ++ remote-endpoint = <&du_out_hdmi1>; ++ }; ++ }; ++ port@1 { ++ reg = <1>; ++ rcar_dw_hdmi1_out: endpoint { ++ remote-endpoint = <&hdmi1_con>; ++ }; ++ }; ++ }; ++}; ++ ++&pfc { ++ scif1_pins: scif1 { ++ groups = "scif1_data_a"; ++ function = "scif1"; ++ }; ++ ++ msiof0_pins: spi1 { ++ groups = "msiof0_clk", "msiof0_rxd", "msiof0_txd", ++ "msiof0_ss1"; ++ function = "msiof0"; ++ }; ++ ++ msiof1_pins: spi2 { ++ groups = "msiof1_clk_a", "msiof1_rxd_a", "msiof1_txd_a", ++ "msiof1_ss1_a"; ++ function = "msiof1"; ++ }; ++ ++ sound_clk_pins: sound-clk { ++ groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a", ++ "audio_clkout_a" /*, "audio_clkout3_a"*/; ++ function = "audio_clk"; ++ }; ++ ++ usb31_pins: usb31 { ++ groups = "usb31"; ++ function = "usb31"; ++ }; ++ ++ can0_pins: can0 { ++ groups = "can0_data_a"; ++ function = "can0"; ++ }; ++ ++ canfd0_pins: canfd0 { ++ groups = "canfd0_data_a"; ++ function = "canfd0"; ++ }; ++}; ++ ++&scif1 { ++ pinctrl-0 = <&scif1_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++}; ++ ++&avb { ++ /delete-property/phy-handle; ++ /delete-property/phy-gpios; ++ /delete-node/ethernet-phy@0; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++}; ++ ++&msiof0 { ++ pinctrl-0 = <&msiof0_pins>; ++ pinctrl-names = "default"; ++ status = "disabled"; ++ cs-gpios = <&gpio5 19 0>; ++ ++ spidev@0 { ++ compatible = "renesas,sh-msiof"; ++ reg = <0>; ++ spi-max-frequency = <66666666>; ++ spi-cpha; ++ spi-cpol; ++ }; ++}; ++ ++&msiof1 { ++ status = "disabled"; ++ cs-gpios = <&gpio6 5 0>; ++}; ++ ++&can0 { ++ pinctrl-0 = <&can0_pins>; ++ pinctrl-names = "default"; ++ status = "disabled"; ++ ++ renesas,can-clock-select = <0x0>; ++ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH /* enable - shared with camera board */ ++ &gpio2 7 GPIO_ACTIVE_LOW /* standby */ ++ >; ++}; ++ ++&canfd { ++ pinctrl-0 = <&canfd0_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ ++ renesas,can-clock-select = <0x0>; ++ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH /* enable - shared with camera board */ ++ &gpio2 7 GPIO_ACTIVE_LOW /* standby */ ++ >; ++ ++ channel0 { ++ status = "okay"; ++ }; ++}; ++ ++&xhci1 { ++ status = "okay"; ++ pinctrl-0 = <&usb31_pins>; ++ pinctrl-names = "default"; ++}; +diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts +new file mode 100644 +index 0000000..d245bbe +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts +@@ -0,0 +1,443 @@ ++/* ++ * Device Tree Source for the H3ULCB Kingfisher V1 board on r8a7795 ES1.x ++ * ++ * Copyright (C) 2017 Renesas Electronics Corp. ++ * Copyright (C) 2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++#include "r8a7795-es1-h3ulcb-kf.dts" ++ ++/ { ++ model = "Renesas H3ULCB Kingfisher V1 board based on r8a7795"; ++ ++ aliases { ++ serial1 = &hscif0; ++ serial2 = &hscif1; ++ serial3 = &scif1; ++ }; ++ ++ wlan_en: regulator@4 { ++ compatible = "regulator-fixed"; ++ regulator-name = "wlan-en-regulator"; ++ ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_74 4 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ }; ++ ++ codec_en_reg: regulator@6 { ++ compatible = "regulator-fixed"; ++ regulator-name = "codec-en-regulator"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_74 15 0>; ++ ++ /* delay - CHECK */ ++ startup-delay-us = <70000>; ++ enable-active-high; ++ }; ++ ++ amp_en_reg: regulator@7 { ++ compatible = "regulator-fixed"; ++ regulator-name = "amp-en-regulator"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_74 0 0>; ++ ++ startup-delay-us = <0>; ++ enable-active-high; ++ }; ++ ++ /delete-node/regulator@8; ++ ++ sdio_switch: regulator@9 { ++ compatible = "regulator-fixed"; ++ regulator-name = "wifi_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_74 5 0>; ++ enable-active-low; ++ regulator-always-on; ++ }; ++ ++ /delete-node/regulator@10; ++ ++ radio_switch: regulator@11 { ++ compatible = "regulator-fixed"; ++ regulator-name = "radio_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_74 13 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ kim { ++ compatible = "kim"; ++ nshutdown_gpio = <343>; /* gpio_ext_74 pin 3 */ ++ /* serial1 */ ++ dev_name = "/dev/ttySC1"; ++ flow_cntrl = <1>; ++ /* int div 8 hscif@26.6666656MHz */ ++ baud_rate = <3333332>; ++ }; ++ ++ hdmi-out { ++ compatible = "hdmi-connector"; ++ type = "a"; ++ ++ port { ++ hdmi_con: endpoint { ++ remote-endpoint = <&adv7513_out>; ++ }; ++ }; ++ }; ++}; ++ ++&pfc { ++ /delete-node/hscif4; ++ ++ scif1_pins: scif1 { ++ groups = "scif1_data_b"; ++ function = "scif1"; ++ }; ++ ++ hscif0_pins: hscif0 { ++ groups = "hscif0_data", "hscif0_ctrl"; ++ function = "hscif0"; ++ }; ++ ++ hscif1_pins: hscif1 { ++ groups = "hscif1_data_a", "hscif1_ctrl_a"; ++ function = "hscif1"; ++ }; ++ ++ du_pins: du { ++ groups = "du_rgb888", "du_sync", "du_clk_out_0", "du_disp"; ++ function = "du"; ++ }; ++}; ++ ++&du { ++ pinctrl-0 = <&du_pins>; ++ pinctrl-names = "default"; ++ ++ ports { ++ port@0 { ++ endpoint { ++ remote-endpoint = <&adv7513_in>; ++ }; ++ }; ++ port@1 { ++ endpoint { ++ remote-endpoint = <&rcar_dw_hdmi0_in>; ++ }; ++ }; ++ }; ++}; ++ ++&gpio0 { ++ /delete-node/video_a_irq; ++ /delete-node/video_b_irq; ++ /delete-node/gpioext_2_20_irq; ++}; ++ ++&gpio1 { ++ /delete-node/gpioext_2_21_irq; ++ /delete-node/wifi_irq; ++}; ++ ++&gpio2 { ++ bl_pwm { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "BL PWM 100%"; ++ }; ++}; ++ ++&gpio5 { ++ /delete-node/touch_irq; ++ /delete-node/bt_strap; ++ ++ /* V1 has h/w bug with swapped RTS and CTS on BT interface */ ++ /* Ignore these pins */ ++ hscif0_cts { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "hscif0 CTS"; ++ }; ++ ++ hscif0_rts { ++ gpio-hog; ++ gpios = <16 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "hscif0 RTS"; ++ }; ++}; ++ ++&gpio7 { ++ /delete-node/gpioext_2_21_irq; ++}; ++ ++&scif1 { ++ pinctrl-0 = <&scif1_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++}; ++ ++&hscif0 { ++ pinctrl-0 = <&hscif0_pins>; ++ pinctrl-names = "default"; ++ ctsrts; ++ ++ status = "okay"; ++}; ++ ++&hscif1 { ++ pinctrl-0 = <&hscif1_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++}; ++ ++&hscif4 { ++ /delete-property/pinctrl-0; ++ /delete-property/pinctrl-names; ++ ++ status = "disabled"; ++}; ++ ++&i2c2 { ++ /delete-node/pca9535@20; ++ /delete-node/pca9535@21; ++ ++ gpio_ext_74: pca9539@74 { ++ compatible = "nxp,pca9539"; ++ reg = <0x74>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio6>; ++ interrupts = <8 IRQ_TYPE_EDGE_FALLING>; ++ ++ hub_pwen { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "HUB pwen"; ++ }; ++ hub_rst { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "HUB rst"; ++ }; ++ otg_offvbus { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "OTG off VBUSn"; ++ }; ++ otg_extlpn { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "OTG EXTLPn"; ++ }; ++ otg_stat1 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "OTG Stat1"; ++ }; ++ otg_stat2 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "OTG Stat2"; ++ }; ++ }; ++ ++ gpio_ext_75: pca9539@75 { ++ compatible = "nxp,pca9539"; ++ reg = <0x75>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio6>; ++ interrupts = <4 IRQ_TYPE_EDGE_FALLING>; ++ ++ gps_rst { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "GPS rst"; ++ }; ++ fpdl_shdn { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "FPDLink shdn"; ++ }; ++ }; ++}; ++ ++&i2cswitch2 { ++ reg = <0x71>; ++ reset-gpios= <&gpio5 3 GPIO_ACTIVE_LOW>; ++ ++ i2c@4 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <4>; ++ ++ hdmi@3d { ++ compatible = "adi,adv7511w"; ++ reg = <0x3d>; ++ interrupt-parent = <&gpio2>; ++ interrupts = <0 IRQ_TYPE_EDGE_BOTH>; ++ pd-gpios = <&gpio_ext_75 5 GPIO_ACTIVE_LOW>; ++ ++ adi,input-depth = <8>; ++ adi,input-colorspace = "rgb"; ++ adi,input-clock = "1x"; ++ adi,input-style = <1>; ++ adi,input-justification = "evenly"; ++ adi,clock-delay = <1200>; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ adv7513_in: endpoint { ++ remote-endpoint = <&du_out_rgb>; ++ }; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ adv7513_out: endpoint { ++ remote-endpoint = <&hdmi_con>; ++ }; ++ }; ++ }; ++ }; ++ }; ++}; ++ ++&i2c4 { ++ /delete-node/pca9535@21; ++ ++ gpio_ext_76: pca9539@76 { ++ compatible = "nxp,pca9539"; ++ reg = <0x76>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio7>; ++ interrupts = <3 IRQ_TYPE_EDGE_FALLING>; ++ ++ port_b_a0 { ++ gpio-hog; ++ gpios = <0 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B A0"; ++ }; ++ port_b_a1 { ++ gpio-hog; ++ gpios = <1 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B A1"; ++ }; ++ port_a_a0 { ++ gpio-hog; ++ gpios = <2 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A A0"; ++ }; ++ port_a_a1 { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A A1"; ++ }; ++ /* pin 12 - CAM_CLK */ ++ rpi_cam_io_1 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "RaspB_IO1"; ++ }; ++ /* pin 11 - CAM_GPIO - assume pwdn */ ++ rpi_cam_io_0 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "RaspB_IO0"; ++ }; ++ /* 0 - FPDLink output, 1 - LVDS output */ ++ lvds_vs_fpdl { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "LVDS switch"; ++ }; ++ }; ++ ++ gpio_ext_77: pca9539@77 { ++ compatible = "nxp,pca9539"; ++ reg = <0x77>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio5>; ++ interrupts = <9 IRQ_TYPE_EDGE_FALLING>; ++ ++ mpcie_wake { ++ gpio-hog; ++ gpios = <0 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "mPCIe WAKE#"; ++ }; ++ mpcie_wdisable { ++ gpio-hog; ++ gpios = <1 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "mPCIe W_DISABLE"; ++ }; ++ mpcie_clreq { ++ gpio-hog; ++ gpios = <2 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "mPCIe CLKREQ#"; ++ }; ++ mpcie_ovc { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "mPCIe OVC"; ++ }; ++ }; ++}; ++ ++&i2cswitch4 { ++ reg = <0x71>; ++ reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>; ++}; ++ ++&wlcore { ++ interrupts = <25 IRQ_TYPE_EDGE_FALLING>; ++}; +diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts +new file mode 100644 +index 0000000..075bf2c +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts +@@ -0,0 +1,1655 @@ ++/* ++ * Device Tree Source for the H3ULCB Kingfisher board on r8a7795 ES1.x ++ * ++ * Copyright (C) 2017 Renesas Electronics Corp. ++ * Copyright (C) 2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++#include "r8a7795-es1-h3ulcb.dts" ++ ++/ { ++ model = "Renesas H3ULCB Kingfisher board based on r8a7795"; ++ ++ aliases { ++ serial1 = &hscif4; ++ }; ++ ++ snd_clk: snd_clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <24576000>; ++ clock-output-names = "scki"; ++ }; ++ ++ wlan_en: regulator@4 { ++ compatible = "regulator-fixed"; ++ regulator-name = "wlan-en-regulator"; ++ ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_20 4 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ }; ++ ++ vcc_sdhi3: regulator@41 { ++ compatible = "regulator-fixed"; ++ ++ regulator-name = "SDHI3 Vcc"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ ++ vccq_sdhi3: regulator@5 { ++ compatible = "regulator-fixed"; ++ ++ regulator-name = "SDHI3 VccQ"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ }; ++ ++ codec_en_reg: regulator@6 { ++ compatible = "regulator-fixed"; ++ regulator-name = "codec-en-regulator"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_20 15 0>; ++ ++ /* delay - CHECK */ ++ startup-delay-us = <70000>; ++ enable-active-high; ++ }; ++ ++ amp_en_reg: regulator@7 { ++ compatible = "regulator-fixed"; ++ regulator-name = "amp-en-regulator"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_20 0 0>; ++ ++ startup-delay-us = <0>; ++ enable-active-high; ++ }; ++ ++ lvds_switch: regulator@8 { ++ compatible = "regulator-fixed"; ++ regulator-name = "lvds_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio1 24 0>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ sdio_switch: regulator@9 { ++ compatible = "regulator-fixed"; ++ regulator-name = "wifi_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_20 5 0>; ++ enable-active-low; ++ regulator-always-on; ++ }; ++ ++ sound_switch: regulator@10 { ++ compatible = "regulator-fixed"; ++ regulator-name = "pcm3168a_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_21 5 0>; ++ enable-active-low; ++ regulator-always-on; ++ }; ++ ++ radio_switch: regulator@11 { ++ compatible = "regulator-fixed"; ++ regulator-name = "radio_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_20 13 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ kim { ++ compatible = "kim"; ++ nshutdown_gpio = <343>; /* pca9535@i2c2.0x20 pin 3 */ ++ /* serial1 */ ++ dev_name = "/dev/ttySC1"; ++ flow_cntrl = <1>; ++ /* int div 8 hscif@26.6666656MHz */ ++ baud_rate = <3333332>; ++ }; ++ ++ btwilink { ++ compatible = "btwilink"; ++ }; ++ ++ sound_ext: sound@0 { ++ pinctrl-0 = <&sound_0_pins>; ++ pinctrl-names = "default"; ++ compatible = "simple-audio-card"; ++ ++ simple-audio-card,format = "left_j"; ++ simple-audio-card,name = "pcm3168a"; ++ ++ simple-audio-card,bitclock-master = <&sound_ext_master>; ++ simple-audio-card,frame-master = <&sound_ext_master>; ++ sound_ext_master: simple-audio-card,cpu@0 { ++ sound-dai = <&rcar_sound 0>; ++ dai-tdm-slot-num = <8>; ++ dai-tdm-slot-width = <32>; ++ }; ++ ++ simple-audio-card,codec@0 { ++ sound-dai = <&pcm3168a>; ++ dai-tdm-slot-num = <8>; ++ dai-tdm-slot-width = <32>; ++ system-clock-frequency = <24576000>; ++ }; ++ }; ++ ++ /delete-node/sound; ++ ++ rsnd_ak4613: sound@1 { ++ pinctrl-0 = <&sound_1_pins>; ++ pinctrl-names = "default"; ++ compatible = "simple-audio-card"; ++ ++ simple-audio-card,format = "left_j"; ++ simple-audio-card,name = "ak4613"; ++ ++ simple-audio-card,bitclock-master = <&sndcpu>; ++ simple-audio-card,frame-master = <&sndcpu>; ++ ++ sndcpu: simple-audio-card,cpu@1 { ++ sound-dai = <&rcar_sound 1>; ++ }; ++ ++ sndcodec: simple-audio-card,codec@1 { ++ sound-dai = <&ak4613>; ++ }; ++ }; ++ ++ sound_radio: sound@2 { ++ pinctrl-0 = <&sound_2_pins>; ++ pinctrl-names = "default"; ++ compatible = "simple-audio-card"; ++ ++ simple-audio-card,format = "i2s"; ++ simple-audio-card,name = "radio"; ++ ++ simple-audio-card,bitclock-master = <&sound_radio_master>; ++ simple-audio-card,frame-master = <&sound_radio_master>; ++ simple-audio-card,cpu@2 { ++ sound-dai = <&rcar_sound 2>; ++ }; ++ ++ sound_radio_master: simple-audio-card,codec@2 { ++ sound-dai = <&radio>; ++ system-clock-frequency = <12288000>; ++ }; ++ }; ++ ++ lvds-encoder { ++ compatible = "thine,thc63lvdm83d"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ port@0 { ++ reg = <0>; ++ lvds_enc_in: endpoint { ++ remote-endpoint = <&du_out_lvds0>; ++ }; ++ }; ++ port@1 { ++ reg = <1>; ++ lvds_enc_out: endpoint { ++ remote-endpoint = <&lvds_in>; ++ }; ++ }; ++ }; ++ }; ++ ++ lvds { ++ compatible = "lvds-connector"; ++ ++ width-mm = <210>; ++ height-mm = <158>; ++ ++ panel-timing { ++ /* 1280x800 @60Hz */ ++ clock-frequency = <65000000>; ++ hactive = <1280>; ++ vactive = <800>; ++ hsync-len = <40>; ++ hfront-porch = <80>; ++ hback-porch = <40>; ++ vfront-porch = <14>; ++ vback-porch = <14>; ++ vsync-len = <4>; ++ }; ++ ++ port { ++ lvds_in: endpoint { ++ remote-endpoint = <&lvds_enc_out>; ++ }; ++ }; ++ }; ++ ++ radio: si468x@0 { ++ compatible = "si,si468x-pcm"; ++ status = "okay"; ++ ++ #sound-dai-cells = <0>; ++ }; ++}; ++ ++&pfc { ++ hscif4_pins: hscif4 { ++ groups = "hscif4_data_a", "hscif4_ctrl"; ++ function = "hscif4"; ++ }; ++ ++ sdhi3_pins_3v3: sd3_3v3 { ++ groups = "sdhi3_data4", "sdhi3_ctrl"; ++ function = "sdhi3"; ++ power-source = <3300>; ++ }; ++ ++ sound_0_pins: sound0 { ++ groups = "ssi78_ctrl", "ssi7_data", "ssi8_data"; ++ function = "ssi"; ++ }; ++ ++ sound_1_pins: sound1 { ++ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; ++ function = "ssi"; ++ }; ++ ++ sound_2_pins: sound2 { ++ groups = "ssi6_ctrl", "ssi6_data"; ++ function = "ssi"; ++ }; ++ ++ usb0_pins: usb0 { ++ groups = "usb0"; ++ function = "usb0"; ++ }; ++ ++ can0_pins: can0 { ++ groups = "can0_data_a"; ++ function = "can0"; ++ }; ++ ++ can1_pins: can1 { ++ groups = "can1_data"; ++ function = "can1"; ++ }; ++ ++ canfd0_pins: canfd0 { ++ groups = "canfd0_data_a"; ++ function = "canfd0"; ++ }; ++ ++ canfd1_pins: canfd1 { ++ groups = "canfd1_data"; ++ function = "canfd1"; ++ }; ++}; ++ ++&gpio0 { ++ video_a_irq { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A irq"; ++ }; ++ ++ video_b_irq { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B irq"; ++ }; ++ ++ gpioext_2_20_irq { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "0x20@i2c2 irq"; ++ }; ++}; ++ ++&gpio1 { ++ gpioext_2_21_irq { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "0x21@i2c2 irq"; ++ }; ++ ++ wifi_irq { ++ gpio-hog; ++ gpios = <25 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "wifi irq"; ++ }; ++}; ++ ++&gpio5 { ++ touch_irq { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "touch irq"; ++ }; ++ ++ /* From TI forum */ ++ /* BT_AUD_OUT should be pulled low when WL_EN is activated. */ ++ /* in case it isn't, wilink8 ends up in one of the test modes that introduces various issues */ ++ bt_strap { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "BT strap pin"; ++ }; ++}; ++ ++&gpio7 { ++ gpioext_2_21_irq { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "0x21@i2c4 irq"; ++ }; ++}; ++ ++&hscif4 { ++ pinctrl-0 = <&hscif4_pins>; ++ pinctrl-names = "default"; ++ ctsrts; ++ ++ status = "okay"; ++}; ++ ++&i2c2 { ++ clock-frequency = <400000>; ++ ++ gpio_ext_20: pca9535@20 { ++ compatible = "nxp,pca9535"; ++ reg = <0x20>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio0>; ++ interrupts = <15 IRQ_TYPE_EDGE_FALLING>; ++ }; ++ ++ gpio_ext_21: pca9535@21 { ++ compatible = "nxp,pca9535"; ++ reg = <0x21>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio1>; ++ interrupts = <15 IRQ_TYPE_EDGE_FALLING>; ++ }; ++ ++ i2cswitch2: pca9548@74 { ++ compatible = "nxp,pca9548"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x74>; ++ reset-gpios = <&gpio6 5 GPIO_ACTIVE_LOW>; ++ ++ i2c@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ /* BCM node(s) */ ++ }; ++ ++ i2c@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <1>; ++ /* USB3.0 HUB node(s) */ ++ }; ++ ++ i2c@2 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <2>; ++ /* Power amp node(s) */ ++ }; ++ ++ i2c@3 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <3>; ++ /* Radio node(s) */ ++ }; ++ ++ i2c@4 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <4>; ++ /* A2B node(s) */ ++ }; ++ ++ i2c@5 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <5>; ++ /* PCIe node(s) */ ++ }; ++ ++ i2c@6 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <6>; ++ /* LVDS display node(s) */ ++ ++ polytouch: edt-ft5x06@38 { ++ compatible = "edt,edt-ft5x06"; ++ reg = <0x38>; ++ interrupt-parent = <&gpio5>; ++ interrupts = <6 IRQ_TYPE_EDGE_FALLING>; ++ }; ++ }; ++ ++ i2c@7 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <7>; ++ /* Audio, GPS and Gyro node(s) */ ++ ++ pcm3168a: audio-codec@44 { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm3168a"; ++ reg = <0x44>; ++ clocks = <&snd_clk>; ++ clock-names = "scki"; ++ tdm; ++ VDD1-supply = <&codec_en_reg>; ++ VDD2-supply = <&codec_en_reg>; ++ VCCAD1-supply = <&codec_en_reg>; ++ VCCAD2-supply = <&codec_en_reg>; ++ VCCDA1-supply = <&_en_reg>; ++ VCCDA2-supply = <&_en_reg>; ++ }; ++ ++ lsm9ds0_acc_mag@1d { ++ compatible = "st,lsm9ds0_acc_mag"; ++ reg = <0x1d>; ++ }; ++ ++ lsm9ds0_gyr@6b { ++ compatible = "st,lsm9ds0-gyro"; ++ reg = <0x6b>; ++ }; ++ ++ /* GPS@ 0x42 */ ++ }; ++ }; ++}; ++ ++&i2c4 { ++ gpio_ext_22: pca9535@21 { ++ compatible = "nxp,pca9535"; ++ reg = <0x22>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio7>; ++ interrupts = <3 IRQ_TYPE_EDGE_FALLING>; ++ ++ /* pin 12 - CAM_CLK */ ++ rpi_cam_io_1 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "RaspB_IO1"; ++ }; ++ /* pin 11 - CAM_GPIO - assume pwdn */ ++ rpi_cam_io_0 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "RaspB_IO0"; ++ }; ++ }; ++ ++ i2cswitch4: pca9548@74 { ++ compatible = "nxp,pca9548"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x74>; ++ reset-gpios= <&gpio6 21 GPIO_ACTIVE_LOW>; ++ ++ i2c@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ /* SAM node(s) */ ++ }; ++ ++ i2c@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <1>; ++ /* Slot A (CN10) */ ++ ++ ov106xx@0 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x60>; ++ ++ port@0 { ++ ov106xx_in0: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin0ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ ov106xx_ti964_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep0>; ++ }; ++ ov106xx_ti954_des0ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep0>; ++ }; ++ }; ++ }; ++ ++ ov106xx@1 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x61>; ++ ++ port@0 { ++ ov106xx_in1: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin1ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ ov106xx_ti964_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep1>; ++ }; ++ ov106xx_ti954_des0ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep1>; ++ }; ++ }; ++ }; ++ ++ ov106xx@2 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x62>; ++ ++ port@0 { ++ ov106xx_in2: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin2ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ ov106xx_ti964_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep2>; ++ }; ++ }; ++ }; ++ ++ ov106xx@3 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x63>; ++ ++ port@0 { ++ ov106xx_in3: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin3ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ ov106xx_ti964_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep3>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB964 @ 0x3a */ ++ ti964-ti9x3@0 { ++ compatible = "ti,ti964-ti9x3"; ++ reg = <0x3a>; ++ gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; ++ ti,sensor_delay = <350>; ++ ti,links = <4>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "coax"; ++ ++ port@0 { ++ ti964_des0ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ ti964_des0ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ ti964_des0ep2: endpoint@2 { ++ ti9x3-addr = <0x0e>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ ti964_des0ep3: endpoint@3 { ++ ti9x3-addr = <0x0f>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ ti964_csi0ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB954 @ 0x38 */ ++ ti954-ti9x3@0 { ++ compatible = "ti,ti954-ti9x3"; ++ reg = <0x38>; ++ gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; ++ ti,sensor_delay = <350>; ++ ti,links = <2>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "coax"; ++ ++ port@0 { ++ ti954_des0ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ ti954_des0ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ }; ++ port@1 { ++ ti954_csi0ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ ++ /* MAX9286 @ 0x2a */ ++ max9286-max9271@0 { ++ compatible = "maxim,max9286-max9271"; ++ reg = <0x2a>; ++ maxim,sensor_delay = <350>; ++ maxim,links = <4>; ++ maxim,lanes = <4>; ++ maxim,resetb-gpio = <1>; ++ maxim,fsync-mode = "automatic"; ++ maxim,timeout = <100>; ++ ++ port@0 { ++ max9286_des0ep0: endpoint@0 { ++ max9271-addr = <0x50>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ max9286_des0ep1: endpoint@1 { ++ max9271-addr = <0x51>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ max9286_des0ep2: endpoint@2 { ++ max9271-addr = <0x52>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ max9286_des0ep3: endpoint@3 { ++ max9271-addr = <0x53>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ max9286_csi0ep0: endpoint { ++ csi-rate = <700>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ }; ++ ++ i2c@2 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <2>; ++ /* Slot B (CN11) */ ++ ++ ov106xx@4 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x64>; ++ ++ port@0 { ++ ov106xx_in4: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin4ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep0>; ++ }; ++ ov106xx_ti964_des1ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep0>; ++ }; ++ ov106xx_ti954_des1ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep0>; ++ }; ++ }; ++ }; ++ ++ ov106xx@5 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x65>; ++ ++ port@0 { ++ ov106xx_in5: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin5ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep1>; ++ }; ++ ov106xx_ti964_des1ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep1>; ++ }; ++ ov106xx_ti954_des1ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep1>; ++ }; ++ }; ++ }; ++ ++ ov106xx@6 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x66>; ++ ++ port@0 { ++ ov106xx_in6: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin6ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep2>; ++ }; ++ ov106xx_ti964_des1ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep2>; ++ }; ++ }; ++ }; ++ ++ ov106xx@7 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x67>; ++ ++ port@0 { ++ ov106xx_in7: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin7ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep3>; ++ }; ++ ov106xx_ti964_des1ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep3>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB964 @ 0x3a */ ++ ti964-ti9x3@1 { ++ compatible = "ti,ti964-ti9x3"; ++ reg = <0x3a>; ++ gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>; ++ ti,sensor_delay = <350>; ++ ti,links = <4>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "coax"; ++ ++ port@0 { ++ ti964_des1ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in4>; ++ }; ++ ti964_des1ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in5>; ++ }; ++ ti964_des1ep2: endpoint@2 { ++ ti9x3-addr = <0x0e>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in6>; ++ }; ++ ti964_des1ep3: endpoint@3 { ++ ti9x3-addr = <0x0f>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in7>; ++ }; ++ }; ++ port@1 { ++ ti964_csi2ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB954 @ 0x38 */ ++ ti954-ti9x3@1 { ++ compatible = "ti,ti954-ti9x3"; ++ reg = <0x38>; ++ gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>; ++ ti,sensor_delay = <350>; ++ ti,links = <2>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "coax"; ++ ++ port@0 { ++ ti954_des1ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in4>; ++ }; ++ ti954_des1ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in5>; ++ }; ++ }; ++ port@1 { ++ ti954_csi2ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ }; ++ ++ /* MAX9286 @ 0x2a */ ++ max9286-max9271@1 { ++ compatible = "maxim,max9286-max9271"; ++ reg = <0x2a>; ++ maxim,sensor_delay = <350>; ++ maxim,links = <4>; ++ maxim,lanes = <4>; ++ maxim,resetb-gpio = <1>; ++ maxim,fsync-mode = "automatic"; ++ maxim,timeout = <100>; ++ ++ port@0 { ++ max9286_des1ep0: endpoint@0 { ++ max9271-addr = <0x50>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in4>; ++ }; ++ max9286_des1ep1: endpoint@1 { ++ max9271-addr = <0x51>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in5>; ++ }; ++ max9286_des1ep2: endpoint@2 { ++ max9271-addr = <0x52>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in6>; ++ }; ++ max9286_des1ep3: endpoint@3 { ++ max9271-addr = <0x53>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in7>; ++ }; ++ }; ++ port@1 { ++ max9286_csi2ep0: endpoint { ++ csi-rate = <700>; ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ }; ++ }; ++ ++ i2c@6 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <6>; ++ /* Slot B (CN11) */ ++ ++ video_b_ext0: pca9535@27 { ++ compatible = "nxp,pca9535"; ++ reg = <0x27>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_b_des_cfg1 { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B cfg1"; ++ }; ++ video_b_des_cfg0 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B cfg0"; ++ }; ++ video_b_pwr_shdn { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR_SHDN"; ++ }; ++ video_b_cam_pwr0 { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR0"; ++ }; ++ video_b_cam_pwr1 { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR1"; ++ }; ++ video_b_cam_pwr2 { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR2"; ++ }; ++ video_b_cam_pwr3 { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR3"; ++ }; ++ video_b_des_shdn { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B DES_SHDN"; ++ }; ++ video_b_des_led { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B led"; ++ }; ++ }; ++ ++ video_b_ext1: max7325@5c { ++ compatible = "maxim,max7325"; ++ reg = <0x5c>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_b_des_cfg2 { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B cfg2"; ++ }; ++ video_b_des_cfg1 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B cfg1"; ++ }; ++ video_b_des_cfg0 { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B cfg0"; ++ }; ++ video_b_pwr_shdn { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR_SHDN"; ++ }; ++ video_b_cam_pwr0 { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR0"; ++ }; ++ video_b_cam_pwr1 { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR1"; ++ }; ++ video_b_cam_pwr3 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR3"; ++ }; ++ }; ++ }; ++ ++ i2c@7 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <7>; ++ /* Slot A (CN10) */ ++ ++ video_a_ext0: pca9535@26 { ++ compatible = "nxp,pca9535"; ++ reg = <0x26>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_a_des_cfg1 { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A cfg1"; ++ }; ++ video_a_des_cfg0 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A cfg0"; ++ }; ++ video_a_pwr_shdn { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR_SHDN"; ++ }; ++ video_a_cam_pwr0 { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR0"; ++ }; ++ video_a_cam_pwr1 { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR1"; ++ }; ++ video_a_cam_pwr2 { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR2"; ++ }; ++ video_a_cam_pwr3 { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR3"; ++ }; ++ video_a_des_shdn { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A DES_SHDN"; ++ }; ++ video_a_des_led { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A led"; ++ }; ++ }; ++ ++ video_a_ext1: max7325@5c { ++ compatible = "maxim,max7325"; ++ reg = <0x5c>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_a_des_cfg2 { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A cfg2"; ++ }; ++ video_a_des_cfg1 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A cfg1"; ++ }; ++ video_a_des_cfg0 { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A cfg0"; ++ }; ++ video_a_pwr_shdn { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR_SHDN"; ++ }; ++ video_a_cam_pwr0 { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR0"; ++ }; ++ video_a_cam_pwr1 { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR1"; ++ }; ++ video_a_cam_pwr3 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR3"; ++ }; ++ }; ++ }; ++ }; ++}; ++ ++&pcie_bus_clk { ++ clock-frequency = <100000000>; ++ status = "okay"; ++}; ++ ++&pciec0 { ++ status = "okay"; ++}; ++ ++&pciec1 { ++ status = "okay"; ++}; ++ ++&vin0 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin0ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ }; ++ port@1 { ++ csi0ep0: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin0_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ vin0_ti964_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep0>; ++ }; ++ vin0_ti954_des0ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep0>; ++ }; ++ }; ++ }; ++}; ++ ++&vin1 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin1ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <1>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ }; ++ port@1 { ++ csi0ep1: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin1_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ vin1_ti964_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep1>; ++ }; ++ vin1_ti954_des0ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep1>; ++ }; ++ }; ++ }; ++}; ++ ++&vin2 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin2ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <2>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ }; ++ port@1 { ++ csi0ep2: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin2_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ vin2_ti964_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep2>; ++ }; ++ }; ++ }; ++}; ++ ++&vin3 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin3ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <3>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ csi0ep3: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin3_max9286_des0ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ vin3_ti964_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep3>; ++ }; ++ }; ++ }; ++}; ++ ++&vin4 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin4ep0: endpoint { ++ csi,select = "csi41"; ++ virtual,channel = <0>; ++ remote-endpoint = <&ov106xx_in4>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep0: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin4_max9286_des1ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep0>; ++ }; ++ vin4_ti964_des1ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep0>; ++ }; ++ vin4_ti954_des1ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep0>; ++ }; ++ }; ++ }; ++}; ++ ++&vin5 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin5ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <1>; ++ remote-endpoint = <&ov106xx_in5>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep1: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin5_max9286_des1ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep1>; ++ }; ++ vin5_ti964_des1ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep1>; ++ }; ++ vin5_ti954_des1ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep1>; ++ }; ++ }; ++ }; ++}; ++ ++&vin6 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin6ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <2>; ++ remote-endpoint = <&ov106xx_in6>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep2: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin6_max9286_des1ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep2>; ++ }; ++ vin6_ti964_des1ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep2>; ++ }; ++ }; ++ }; ++}; ++ ++&vin7 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin7ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <3>; ++ remote-endpoint = <&ov106xx_in7>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep3: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin7_max9286_des1ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep3>; ++ }; ++ vin7_ti964_des1ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep3>; ++ }; ++ }; ++ }; ++}; ++ ++&csi2_40 { ++ status = "okay"; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "ycbcr422"; ++ receive,vc = <0>; ++ }; ++ csi2_vc1 { ++ data,type = "ycbcr422"; ++ receive,vc = <1>; ++ }; ++ csi2_vc2 { ++ data,type = "ycbcr422"; ++ receive,vc = <2>; ++ }; ++ csi2_vc3 { ++ data,type = "ycbcr422"; ++ receive,vc = <3>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_40_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ csi-rate = <300>; ++ }; ++ }; ++}; ++ ++&csi2_41 { ++ status = "okay"; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "ycbcr422"; ++ receive,vc = <0>; ++ }; ++ csi2_vc1 { ++ data,type = "ycbcr422"; ++ receive,vc = <1>; ++ }; ++ csi2_vc2 { ++ data,type = "ycbcr422"; ++ receive,vc = <2>; ++ }; ++ csi2_vc3 { ++ data,type = "ycbcr422"; ++ receive,vc = <3>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_41_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ csi-rate = <300>; ++ }; ++ }; ++}; ++ ++&rcar_sound { ++ pinctrl-0 = <&sound_clk_pins>; ++ ++ /* Multi DAI */ ++ #sound-dai-cells = <1>; ++ ++ rcar_sound,dai { ++ dai0 { ++ playback = <&ssi7>; ++ capture = <&ssi8>; ++ }; ++ ++ dai1 { ++ playback = <&ssi0 &src0 &dvc0>; ++ capture = <&ssi1 &src1 &dvc1>; ++ }; ++ ++ dai2 { ++ capture = <&ssi6>; ++ }; ++ }; ++}; ++ ++&sdhi3 { ++ pinctrl-0 = <&sdhi3_pins_3v3>; ++ pinctrl-names = "default"; ++ ++ vmmc-supply = <&wlan_en>; ++ vqmmc-supply = <&vccq_sdhi3>; ++ keep-power-in-suspend; ++ enable-sdio-wakeup; ++ bus-width = <4>; ++ no-1-8-v; ++ non-removable; ++ cap-power-off-card; ++ max-frequency = <26000000>; ++ status = "okay"; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ wlcore: wlcore@2 { ++ compatible = "ti,wl1837"; ++ reg = <2>; ++ interrupt-parent = <&gpio1>; ++ interrupts = <25 IRQ_TYPE_EDGE_RISING>; ++ }; ++}; ++ ++&usb2_phy0 { ++ pinctrl-0 = <&usb0_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++}; ++ ++&hsusb { ++ status = "okay"; ++}; ++ ++&ehci0 { ++ status = "okay"; ++}; ++ ++&ohci0 { ++ status = "okay"; ++}; ++ ++&xhci0 { ++ status = "okay"; ++}; ++ ++&msiof1 { ++ status = "disabled"; ++}; ++ ++&can0 { ++ pinctrl-0 = <&can0_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ ++ renesas,can-clock-select = <0x0>; ++}; ++ ++&can1 { ++ pinctrl-0 = <&can1_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ ++ renesas,can-clock-select = <0x0>; ++}; ++ ++&canfd { ++ pinctrl-0 = <&canfd0_pins &canfd1_pins>; ++ pinctrl-names = "default"; ++ status = "disabled"; ++ ++ channel0 { ++ status = "okay"; ++ }; ++ ++ channel1 { ++ status = "okay"; ++ }; ++}; ++ ++/* uncomment to enable CN48 on VIN4 */ ++//#include "ulcb-kf-rpi.dtsi" ++/* uncomment to enable CN47: SD on SDHI3 */ ++//#include "ulcb-kf-sd3.dtsi" +diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts +new file mode 100644 +index 0000000..0e6ea57 +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts +@@ -0,0 +1,1787 @@ ++/* ++ * Device Tree Source for the H3ULCB Videobox board on r8a7795 ES1.x ++ * ++ * Copyright (C) 2017 Renesas Electronics Corp. ++ * Copyright (C) 2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++#include "r8a7795-es1-h3ulcb.dts" ++ ++/ { ++ model = "Renesas H3ULCB Videobox board based on r8a7795"; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ led5 { ++ gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; ++ }; ++ led6 { ++ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; ++ }; ++ /* D13 - status 0 */ ++ led_ext00 { ++ gpios = <&gpio_ext_led 0 GPIO_ACTIVE_LOW>; ++ linux,default-trigger = "heartbeat"; ++ }; ++ /* D14 - status 1 */ ++ led_ext01 { ++ gpios = <&gpio_ext_led 1 GPIO_ACTIVE_LOW>; ++ linux,default-trigger = "mmc1"; ++ }; ++ /* D16 - HDMI1 */ ++ led_ext02 { ++ gpios = <&gpio_ext_led 2 GPIO_ACTIVE_LOW>; ++ }; ++ /* D18 - HDMI0 */ ++ led_ext03 { ++ gpios = <&gpio_ext_led 3 GPIO_ACTIVE_LOW>; ++ }; ++ /* D20 - USB3.0 - 0.1 */ ++ led_ext04 { ++ gpios = <&gpio_ext_led 4 GPIO_ACTIVE_LOW>; ++ }; ++ /* D21 - USB3.0 - 0.2 */ ++ led_ext05 { ++ gpios = <&gpio_ext_led 5 GPIO_ACTIVE_LOW>; ++ }; ++ /* D24 - USB3.0 - 1.1 */ ++ led6_ext06 { ++ gpios = <&gpio_ext_led 6 GPIO_ACTIVE_LOW>; ++ }; ++ /* D25 - USB3.0 - 1.2 */ ++ led_ext07 { ++ gpios = <&gpio_ext_led 7 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ snd_clk: snd_clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <24576000>; ++ clock-output-names = "scki"; ++ }; ++ ++ vccq_sdhi3: regulator@5 { ++ compatible = "regulator-fixed"; ++ ++ regulator-name = "SDHI3 VccQ"; ++ /* external voltage translator to 1.8V */ ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ }; ++ ++ fpdlink_switch: regulator@8 { ++ compatible = "regulator-fixed"; ++ regulator-name = "fpdlink_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio1 20 0>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ hub_reset: regulator@9 { ++ compatible = "regulator-fixed"; ++ regulator-name = "hub_reset"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio5 5 0>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ hub_power: regulator@10 { ++ compatible = "regulator-fixed"; ++ regulator-name = "hub_power"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ gpio = <&gpio6 28 0>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ /delete-node/sound; ++ ++ rsnd_ak4613: sound@0 { ++ pinctrl-0 = <&sound_0_pins>; ++ pinctrl-names = "default"; ++ compatible = "simple-audio-card"; ++ ++ simple-audio-card,format = "left_j"; ++ simple-audio-card,name = "ak4613"; ++ ++ simple-audio-card,bitclock-master = <&sndcpu>; ++ simple-audio-card,frame-master = <&sndcpu>; ++ ++ sndcpu: simple-audio-card,cpu@1 { ++ sound-dai = <&rcar_sound>; ++ }; ++ ++ sndcodec: simple-audio-card,codec@1 { ++ sound-dai = <&ak4613>; ++ }; ++ }; ++ ++ lvds-encoder { ++ compatible = "thine,thc63lvdm83d"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ port@0 { ++ reg = <0>; ++ lvds_enc_in: endpoint { ++ remote-endpoint = <&du_out_lvds0>; ++ }; ++ }; ++ port@1 { ++ reg = <1>; ++ lvds_enc_out: endpoint { ++ remote-endpoint = <&lvds_in>; ++ }; ++ }; ++ }; ++ }; ++ ++ lvds { ++ compatible = "lvds-connector"; ++ ++ width-mm = <210>; ++ height-mm = <158>; ++ ++ panel-timing { ++ /* 1280x800 @60Hz */ ++ clock-frequency = <65000000>; ++ hactive = <1280>; ++ vactive = <800>; ++ hsync-len = <40>; ++ hfront-porch = <80>; ++ hback-porch = <40>; ++ vfront-porch = <14>; ++ vback-porch = <14>; ++ vsync-len = <4>; ++ }; ++ ++ port { ++ lvds_in: endpoint { ++ remote-endpoint = <&lvds_enc_out>; ++ }; ++ }; ++ }; ++ ++ hdmi1-out { ++ compatible = "hdmi-connector"; ++ type = "a"; ++ ++ port { ++ hdmi1_con: endpoint { ++ remote-endpoint = <&rcar_dw_hdmi1_out>; ++ }; ++ }; ++ }; ++ ++ excan_ref_clk: excan-ref-clock { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <16000000>; ++ }; ++ ++ radio: si468x@0 { ++ compatible = "si,si468x-pcm"; ++ status = "okay"; ++ ++ #sound-dai-cells = <0>; ++ }; ++ ++ spi_gpio_sw { ++ compatible = "spi-gpio"; ++ #address-cells = <0x1>; ++ #size-cells = <0x0>; ++ gpio-sck = <&gpio0 8 GPIO_ACTIVE_HIGH>; ++ gpio-miso = <&gpio0 10 GPIO_ACTIVE_HIGH>; ++ gpio-mosi = <&gpio0 11 GPIO_ACTIVE_HIGH>; ++ cs-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; ++ num-chipselects = <1>; ++ ++ spidev: spidev@0 { ++ compatible = "spidev", "spi-gpio"; ++ reg = <0>; ++ spi-max-frequency = <25000000>; ++ spi-cpha; ++ spi-cpol; ++ }; ++ }; ++ ++ spi_gpio_can { ++ compatible = "spi-gpio"; ++ #address-cells = <0x1>; ++ #size-cells = <0x0>; ++ gpio-sck = <&gpio1 2 GPIO_ACTIVE_HIGH>; ++ gpio-miso = <&gpio1 3 GPIO_ACTIVE_HIGH>; ++ gpio-mosi = <&gpio1 1 GPIO_ACTIVE_HIGH>; ++ cs-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH ++ &gpio1 4 GPIO_ACTIVE_HIGH>; ++ num-chipselects = <2>; ++ ++ spican0: spidev@0 { ++ compatible = "microchip,mcp2515"; ++ reg = <0>; ++ clocks = <&excan_ref_clk>; ++ interrupt-parent = <&gpio0>; ++ interrupts = <15 GPIO_ACTIVE_LOW>; ++ spi-max-frequency = <10000000>; ++ }; ++ spican1: spidev@1 { ++ compatible = "microchip,mcp2515"; ++ reg = <1>; ++ clocks = <&excan_ref_clk>; ++ interrupt-parent = <&gpio1>; ++ interrupts = <5 GPIO_ACTIVE_LOW>; ++ spi-max-frequency = <10000000>; ++ }; ++ }; ++}; ++ ++&du { ++ ports { ++ port@1 { ++ endpoint { ++ remote-endpoint = <&rcar_dw_hdmi0_in>; ++ }; ++ }; ++ port@2 { ++ endpoint { ++ remote-endpoint = <&rcar_dw_hdmi1_in>; ++ }; ++ }; ++ port@3 { ++ endpoint { ++ remote-endpoint = <&lvds_enc_in>; ++ }; ++ }; ++ }; ++}; ++ ++&hdmi1 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ port@0 { ++ reg = <0>; ++ rcar_dw_hdmi1_in: endpoint { ++ remote-endpoint = <&du_out_hdmi1>; ++ }; ++ }; ++ port@1 { ++ reg = <1>; ++ rcar_dw_hdmi1_out: endpoint { ++ remote-endpoint = <&hdmi1_con>; ++ }; ++ }; ++ }; ++}; ++ ++&pfc { ++ hscif4_pins: hscif4 { ++ groups = "hscif4_data_a", "hscif4_ctrl"; ++ function = "hscif4"; ++ }; ++ ++ sdhi3_pins_3v3: sd3_3v3 { ++ groups = "sdhi3_data4", "sdhi3_ctrl"; ++ function = "sdhi3"; ++ power-source = <3300>; ++ }; ++ ++ /delete-node/sound; ++ ++ sound_0_pins: sound1 { ++ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; ++ function = "ssi"; ++ }; ++ ++ usb0_pins: usb0 { ++ groups = "usb0"; ++ function = "usb0"; ++ }; ++ ++ can0_pins: can0 { ++ groups = "can0_data_a"; ++ function = "can0"; ++ }; ++ ++ can1_pins: can1 { ++ groups = "can1_data"; ++ function = "can1"; ++ }; ++ ++ canfd0_pins: canfd0 { ++ groups = "canfd0_data_a"; ++ function = "canfd0"; ++ }; ++ ++ canfd1_pins: canfd1 { ++ groups = "canfd1_data"; ++ function = "canfd1"; ++ }; ++}; ++ ++&gpio0 { ++ video_a_irq { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A irq"; ++ }; ++ ++ video_b_irq { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B irq"; ++ }; ++ ++ video_c_irq { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-C irq"; ++ }; ++}; ++ ++&gpio1 { ++ gpioext_4_22_irq { ++ gpio-hog; ++ gpios = <25 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "0x22@i2c4 irq"; ++ }; ++ pcie_disable { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "mPCIe W_DISABLE"; ++ }; ++ m2_sleep { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "M.2 SLEEP#"; ++ }; ++ m2_pres { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "M.2 Present"; ++ }; ++ m2_pcie_det { ++ gpio-hog; ++ gpios = <18 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "M.2 PCIe detected"; ++ }; ++ m2_usb_det { ++ gpio-hog; ++ gpios = <19 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "M.2 USB30 detected"; ++ }; ++ m2_usb_det { ++ gpio-hog; ++ gpios = <27 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "M.2 SSD detected"; ++ }; ++ eth_phy_reset { ++ gpio-hog; ++ gpios = <16 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "BR phy reset"; ++ }; ++ eth_sw_reset { ++ gpio-hog; ++ gpios = <17 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "BR switch reset"; ++ }; ++}; ++ ++&gpio2 { ++ m2_wake { ++ gpio-hog; ++ gpios = <1 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "M.2 WAKE#"; ++ }; ++ m2_pcie_en { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "M.2 PCIe enable"; ++ }; ++}; ++ ++&gpio3 { ++ m2_power_off { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "M.2 FULL_CARD_POWER_OFF#"; ++ }; ++}; ++ ++&gpio6 { ++ pcie_wake { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "mPCIe WAKE#"; ++ }; ++ pcie_clkreq { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "mPCIe CLKREQ#"; ++ }; ++ m2_rst { ++ gpio-hog; ++ gpios = <21 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "M.2 RESET#"; ++ }; ++}; ++ ++&hscif4 { ++ pinctrl-0 = <&hscif4_pins>; ++ pinctrl-names = "default"; ++ ctsrts; ++ ++ status = "okay"; ++}; ++ ++&i2c2 { ++ clock-frequency = <400000>; ++ ++ i2cswitch2: pca9548@74 { ++ compatible = "nxp,pca9548"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x74>; ++ reset-gpios = <&gpio6 5 GPIO_ACTIVE_LOW>; ++ ++ i2c@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ /* USB3.0 HUB node(s) */ ++ }; ++ ++ i2c@6 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <6>; ++ /* PCIe node(s) */ ++ }; ++ ++ i2c@7 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <7>; ++ /* Slot A (CN10) */ ++ ++ ov106xx@0 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x60>; ++ ++ port@0 { ++ ov106xx_in0: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin0ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ ov106xx_ti964_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep0>; ++ }; ++ ov106xx_ti954_des0ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep0>; ++ }; ++ }; ++ }; ++ ++ ov106xx@1 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x61>; ++ ++ port@0 { ++ ov106xx_in1: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin1ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ ov106xx_ti964_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep1>; ++ }; ++ ov106xx_ti954_des0ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep1>; ++ }; ++ }; ++ }; ++ ++ ov106xx@2 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x62>; ++ ++ port@0 { ++ ov106xx_in2: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin2ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ ov106xx_ti964_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep2>; ++ }; ++ }; ++ }; ++ ++ ov106xx@3 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x63>; ++ ++ port@0 { ++ ov106xx_in3: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin3ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ ov106xx_ti964_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep3>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB964 @ 0x3a */ ++ ti964-ti9x3@0 { ++ compatible = "ti,ti964-ti9x3"; ++ reg = <0x3a>; ++ ti,sensor_delay = <350>; ++ ti,links = <4>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "stp"; ++ ++ port@0 { ++ ti964_des0ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ ti964_des0ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ ti964_des0ep2: endpoint@2 { ++ ti9x3-addr = <0x0e>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ ti964_des0ep3: endpoint@3 { ++ ti9x3-addr = <0x0f>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ ti964_csi0ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB954 @ 0x38 */ ++ ti954-ti9x3@0 { ++ compatible = "ti,ti954-ti9x3"; ++ reg = <0x38>; ++ /* gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; */ ++ ti,sensor_delay = <350>; ++ ti,links = <2>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "stp"; ++ ++ port@0 { ++ ti954_des0ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ ti954_des0ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ }; ++ port@1 { ++ ti954_csi0ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ ++ /* MAX9286 @ 0x2c */ ++ max9286-max9271@0 { ++ compatible = "maxim,max9286-max9271"; ++ reg = <0x2c>; ++ maxim,sensor_delay = <350>; ++ maxim,links = <4>; ++ maxim,lanes = <4>; ++ maxim,resetb-gpio = <1>; ++ maxim,fsync-mode = "automatic"; ++ maxim,timeout = <100>; ++ ++ port@0 { ++ max9286_des0ep0: endpoint@0 { ++ max9271-addr = <0x50>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ max9286_des0ep1: endpoint@1 { ++ max9271-addr = <0x51>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ max9286_des0ep2: endpoint@2 { ++ max9271-addr = <0x52>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ max9286_des0ep3: endpoint@3 { ++ max9271-addr = <0x53>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ max9286_csi0ep0: endpoint { ++ csi-rate = <700>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ }; ++ ++ i2c@2 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <2>; ++ /* Slot B (CN11) */ ++ ++ ov106xx@4 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x64>; ++ ++ port@0 { ++ ov106xx_in4: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin4ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep0>; ++ }; ++ ov106xx_ti964_des1ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep0>; ++ }; ++ ov106xx_ti954_des1ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep0>; ++ }; ++ }; ++ }; ++ ++ ov106xx@5 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x65>; ++ ++ port@0 { ++ ov106xx_in5: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin5ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep1>; ++ }; ++ ov106xx_ti964_des1ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep1>; ++ }; ++ ov106xx_ti954_des1ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep1>; ++ }; ++ }; ++ }; ++ ++ ov106xx@6 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x66>; ++ ++ port@0 { ++ ov106xx_in6: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin6ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep2>; ++ }; ++ ov106xx_ti964_des1ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep2>; ++ }; ++ }; ++ }; ++ ++ ov106xx@7 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x67>; ++ ++ port@0 { ++ ov106xx_in7: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin7ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep3>; ++ }; ++ ov106xx_ti964_des1ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep3>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB964 @ 0x3a */ ++ ti964-ti9x3@1 { ++ compatible = "ti,ti964-ti9x3"; ++ reg = <0x3a>; ++ ti,sensor_delay = <350>; ++ ti,links = <4>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "stp"; ++ ++ port@0 { ++ ti964_des1ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in4>; ++ }; ++ ti964_des1ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in5>; ++ }; ++ ti964_des1ep2: endpoint@2 { ++ ti9x3-addr = <0x0e>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in6>; ++ }; ++ ti964_des1ep3: endpoint@3 { ++ ti9x3-addr = <0x0f>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in7>; ++ }; ++ }; ++ port@1 { ++ ti964_csi2ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB954 @ 0x38 */ ++ ti954-ti9x3@1 { ++ compatible = "ti,ti954-ti9x3"; ++ reg = <0x38>; ++ /* gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>; */ ++ ti,sensor_delay = <350>; ++ ti,links = <2>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "stp"; ++ ++ port@0 { ++ ti954_des1ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in4>; ++ }; ++ ti954_des1ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in5>; ++ }; ++ }; ++ port@1 { ++ ti954_csi2ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ }; ++ ++ /* MAX9286 @ 0x2c */ ++ max9286-max9271@1 { ++ compatible = "maxim,max9286-max9271"; ++ reg = <0x2c>; ++ maxim,sensor_delay = <350>; ++ maxim,links = <4>; ++ maxim,lanes = <4>; ++ maxim,resetb-gpio = <1>; ++ maxim,fsync-mode = "automatic"; ++ maxim,timeout = <100>; ++ ++ port@0 { ++ max9286_des1ep0: endpoint@0 { ++ max9271-addr = <0x50>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in4>; ++ }; ++ max9286_des1ep1: endpoint@1 { ++ max9271-addr = <0x51>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in5>; ++ }; ++ max9286_des1ep2: endpoint@2 { ++ max9271-addr = <0x52>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in6>; ++ }; ++ max9286_des1ep3: endpoint@3 { ++ max9271-addr = <0x53>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in7>; ++ }; ++ }; ++ port@1 { ++ max9286_csi2ep0: endpoint { ++ csi-rate = <700>; ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ }; ++ }; ++ ++ i2c@3 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <3>; ++ /* Slot C (CN12) */ ++ }; ++ ++ i2c@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <1>; ++ /* Slot A (CN10) */ ++ ++ video_a_ext0: pca9535@26 { ++ compatible = "nxp,pca9535"; ++ reg = <0x26>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_a_des_cfg1 { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg1"; ++ }; ++ video_a_des_cfg0 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg0"; ++ }; ++ video_a_pwr_shdn { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR_SHDN"; ++ }; ++ video_a_cam_pwr0 { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR0"; ++ }; ++ video_a_cam_pwr1 { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR1"; ++ }; ++ video_a_cam_pwr2 { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR2"; ++ }; ++ video_a_cam_pwr3 { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR3"; ++ }; ++ video_a_des_shdn { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A DES_SHDN"; ++ }; ++ video_a_des_led { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A led"; ++ }; ++ }; ++ ++ video_a_ext1: max7325@5c { ++ compatible = "maxim,max7325"; ++ reg = <0x5c>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_a_des_cfg2 { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg2"; ++ }; ++ video_a_des_cfg1 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg1"; ++ }; ++ video_a_des_cfg0 { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg0"; ++ }; ++ video_a_pwr_shdn { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR_SHDN"; ++ }; ++ video_a_cam_pwr0 { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR0"; ++ }; ++ video_a_cam_pwr1 { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR1"; ++ }; ++ video_a_cam_pwr2 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR2"; ++ }; ++ video_a_cam_pwr3 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR3"; ++ }; ++ video_a_des_shdn { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A DES_SHDN"; ++ }; ++ video_a_led { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A LED"; ++ }; ++ }; ++ }; ++ ++ i2c@5 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <5>; ++ /* Slot B (CN11) */ ++ ++ video_b_ext0: pca9535@26 { ++ compatible = "nxp,pca9535"; ++ reg = <0x26>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_b_des_cfg1 { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B cfg1"; ++ }; ++ video_b_des_cfg0 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B cfg0"; ++ }; ++ video_b_pwr_shdn { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR_SHDN"; ++ }; ++ video_b_cam_pwr0 { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR0"; ++ }; ++ video_b_cam_pwr1 { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR1"; ++ }; ++ video_b_cam_pwr2 { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR2"; ++ }; ++ video_b_cam_pwr3 { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR3"; ++ }; ++ video_b_des_shdn { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B DES_SHDN"; ++ }; ++ video_b_des_led { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B led"; ++ }; ++ }; ++ ++ video_b_ext1: max7325@5c { ++ compatible = "maxim,max7325"; ++ reg = <0x5c>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_b_des_cfg2 { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B cfg2"; ++ }; ++ video_b_des_cfg1 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B cfg1"; ++ }; ++ video_b_des_cfg0 { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B cfg0"; ++ }; ++ video_b_pwr_shdn { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR_SHDN"; ++ }; ++ video_b_cam_pwr0 { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR0"; ++ }; ++ video_b_cam_pwr1 { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR1"; ++ }; ++ video_b_cam_pwr2 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR2"; ++ }; ++ video_b_cam_pwr3 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR3"; ++ }; ++ video_b_des_shdn { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B DES_SHDN"; ++ }; ++ video_b_led { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B LED"; ++ }; ++ }; ++ }; ++ ++ i2c@4 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <4>; ++ /* Slot C (CN12) */ ++ }; ++ }; ++}; ++ ++&i2c4 { ++ i2cswitch4: pca9548@74 { ++ compatible = "nxp,pca9548"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x74>; ++ reset-gpios= <&gpio5 15 GPIO_ACTIVE_LOW>; ++ ++ i2c@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ /* FAN node - EMC2103 */ ++ fan_ctrl:ecm2103@2e { ++ compatible = "emc2103"; ++ reg = <0x2e>; ++ }; ++ }; ++ ++ i2c@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <1>; ++ /* Power nodes - 2 x TPS544x20 */ ++ }; ++ ++ i2c@2 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <2>; ++ /* CAN and power board nodes */ ++ ++ gpio_ext_pwr: pca9535@22 { ++ compatible = "nxp,pca9535"; ++ reg = <0x22>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio1>; ++ interrupts = <25 IRQ_TYPE_EDGE_FALLING>; ++ ++ /* enable input DCDC after wake-up signal released */ ++ pwr_hold { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "pwr_hold"; ++ }; ++ ++ /* CAN0 */ ++ can0_stby { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can0_stby"; ++ }; ++ can0_load { ++ gpio-hog; ++ gpios = <0 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can0_120R_load"; ++ }; ++ /* CAN1 */ ++ can1_stby { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can1_stby"; ++ }; ++ can1_load { ++ gpio-hog; ++ gpios = <1 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can1_120R_load"; ++ }; ++ /* CAN2 */ ++ can2_stby { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can2_stby"; ++ }; ++ can2_load { ++ gpio-hog; ++ gpios = <2 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can2_120R_load"; ++ }; ++ can2_rst { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "can2_rst"; ++ }; ++ /* CAN3 */ ++ can3_stby { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can3_stby"; ++ }; ++ can3_load { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can3_120R_load"; ++ }; ++ can3_rst { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "can3_rst"; ++ }; ++ }; ++ }; ++ ++ i2c@3 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <3>; ++ /* FPDLink output node - DS90UH947 */ ++ }; ++ ++ i2c@4 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <4>; ++ /* BCM switch node */ ++ }; ++ ++ i2c@5 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <5>; ++ /* LED board node(s) */ ++ ++ gpio_ext_led: pca9535@22 { ++ compatible = "nxp,pca9535"; ++ reg = <0x22>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ /* gpios 0..7 are used for indication LEDs, low-active */ ++ }; ++ }; ++ ++ i2c@6 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <6>; ++ /* M2 connector i2c node(s) */ ++ }; ++ ++ /* port 7 is not used */ ++ }; ++}; ++ ++&pcie_bus_clk { ++ clock-frequency = <100000000>; ++ status = "okay"; ++}; ++ ++&pciec0 { ++ status = "okay"; ++}; ++ ++&pciec1 { ++ status = "okay"; ++}; ++ ++&vin0 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin0ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ }; ++ port@1 { ++ csi0ep0: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin0_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ vin0_ti964_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep0>; ++ }; ++ vin0_ti954_des0ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep0>; ++ }; ++ }; ++ }; ++}; ++ ++&vin1 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin1ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <1>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ }; ++ port@1 { ++ csi0ep1: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin1_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ vin1_ti964_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep1>; ++ }; ++ vin1_ti954_des0ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep1>; ++ }; ++ }; ++ }; ++}; ++ ++&vin2 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin2ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <2>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ }; ++ port@1 { ++ csi0ep2: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin2_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ vin2_ti964_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep2>; ++ }; ++ }; ++ }; ++}; ++ ++&vin3 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin3ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <3>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ csi0ep3: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin3_max9286_des0ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ vin3_ti964_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep3>; ++ }; ++ }; ++ }; ++}; ++ ++&vin4 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin4ep0: endpoint { ++ csi,select = "csi41"; ++ virtual,channel = <0>; ++ remote-endpoint = <&ov106xx_in4>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep0: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin4_max9286_des1ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep0>; ++ }; ++ vin4_ti964_des1ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep0>; ++ }; ++ vin4_ti954_des1ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep0>; ++ }; ++ }; ++ }; ++}; ++ ++&vin5 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin5ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <1>; ++ remote-endpoint = <&ov106xx_in5>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep1: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin5_max9286_des1ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep1>; ++ }; ++ vin5_ti964_des1ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep1>; ++ }; ++ vin5_ti954_des1ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep1>; ++ }; ++ }; ++ }; ++}; ++ ++&vin6 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin6ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <2>; ++ remote-endpoint = <&ov106xx_in6>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep2: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin6_max9286_des1ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep2>; ++ }; ++ vin6_ti964_des1ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep2>; ++ }; ++ }; ++ }; ++}; ++ ++&vin7 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin7ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <3>; ++ remote-endpoint = <&ov106xx_in7>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep3: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin7_max9286_des1ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep3>; ++ }; ++ vin7_ti964_des1ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep3>; ++ }; ++ }; ++ }; ++}; ++ ++&csi2_40 { ++ status = "okay"; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "ycbcr422"; ++ receive,vc = <0>; ++ }; ++ csi2_vc1 { ++ data,type = "ycbcr422"; ++ receive,vc = <1>; ++ }; ++ csi2_vc2 { ++ data,type = "ycbcr422"; ++ receive,vc = <2>; ++ }; ++ csi2_vc3 { ++ data,type = "ycbcr422"; ++ receive,vc = <3>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_40_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ csi-rate = <300>; ++ }; ++ }; ++}; ++ ++&csi2_41 { ++ status = "okay"; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "ycbcr422"; ++ receive,vc = <0>; ++ }; ++ csi2_vc1 { ++ data,type = "ycbcr422"; ++ receive,vc = <1>; ++ }; ++ csi2_vc2 { ++ data,type = "ycbcr422"; ++ receive,vc = <2>; ++ }; ++ csi2_vc3 { ++ data,type = "ycbcr422"; ++ receive,vc = <3>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_41_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ csi-rate = <300>; ++ }; ++ }; ++}; ++ ++&rcar_sound { ++ pinctrl-0 = <&sound_clk_pins>; ++ ++ /* Multi DAI */ ++ #sound-dai-cells = <1>; ++}; ++ ++&sata { ++ status = "okay"; ++}; ++ ++&ssi1 { ++ /delete-property/shared-pin; ++}; ++ ++&avb { ++ /delete-property/phy-handle; ++ /delete-property/phy-gpios; ++ phy-mode = "rgmii"; ++ ++ /delete-node/ethernet-phy@0; ++ ++ fixed-link { ++ speed = <100>; ++ full-duplex; ++ }; ++}; ++ ++&msiof1 { ++ status = "disabled"; ++}; ++ ++&usb2_phy0 { ++ pinctrl-0 = <&usb0_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++}; ++ ++&xhci0 { ++ status = "okay"; ++}; ++ ++&hsusb { ++ status = "okay"; ++}; ++ ++&ehci0 { ++ status = "okay"; ++}; ++ ++&ohci0 { ++ status = "okay"; ++}; ++ ++&can0 { ++ pinctrl-0 = <&can0_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ ++ renesas,can-clock-select = <0x0>; ++}; ++ ++&can1 { ++ pinctrl-0 = <&can1_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ ++ renesas,can-clock-select = <0x0>; ++}; ++ ++&canfd { ++ pinctrl-0 = <&canfd0_pins &canfd1_pins>; ++ pinctrl-names = "default"; ++ status = "disabled"; ++ ++ renesas,can-clock-select = <0x0>; ++ ++ channel0 { ++ status = "okay"; ++ }; ++ ++ channel1 { ++ status = "okay"; ++ }; ++}; ++ ++/* uncomment to enable CN12 on VIN4-7 */ ++//#include "ulcb-vb-cn12.dtsi" +diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts +new file mode 100644 +index 0000000..de56fa4 +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts +@@ -0,0 +1,546 @@ ++/* ++ * Device Tree Source for the H3ULCB.View board on r8a7795 ES1.x ++ * ++ * Copyright (C) 2016-2017 Renesas Electronics Corp. ++ * Copyright (C) 2016-2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++#include "r8a7795-es1-h3ulcb.dts" ++ ++/ { ++ model = "Renesas H3ULCB.View board based on r8a7795"; ++}; ++ ++&i2c4 { ++ ov106xx@0 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x60>; ++ ++ port@0 { ++ ov106xx_in0: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin0ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ }; ++ }; ++ ++ ov106xx@1 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x61>; ++ ++ port@0 { ++ ov106xx_in1: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin1ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ }; ++ }; ++ ++ ov106xx@2 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x62>; ++ ++ port@0 { ++ ov106xx_in2: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin2ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ }; ++ }; ++ ++ ov106xx@3 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x63>; ++ ++ port@0 { ++ ov106xx_in3: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin3ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_des0ep3: endpoint { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ }; ++ }; ++ ++ ov106xx@4 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x64>; ++ ++ port@0 { ++ ov106xx_in4: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin4ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep0>; ++ }; ++ }; ++ }; ++ ++ ov106xx@5 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x65>; ++ ++ port@0 { ++ ov106xx_in5: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin5ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep1>; ++ }; ++ }; ++ }; ++ ++ ov106xx@6 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x66>; ++ ++ port@0 { ++ ov106xx_in6: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin6ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep2>; ++ }; ++ }; ++ }; ++ ++ ov106xx@7 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x67>; ++ ++ port@0 { ++ ov106xx_in7: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin7ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_des1ep3: endpoint { ++ remote-endpoint = <&max9286_des1ep3>; ++ }; ++ }; ++ }; ++ ++ max9286-max9271@0 { ++ compatible = "maxim,max9286-max9271"; ++ reg = <0x4c>; ++ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; ++ maxim,sensor_delay = <0>; ++ maxim,links = <4>; ++ maxim,lanes = <4>; ++ maxim,resetb-gpio = <1>; ++ maxim,fsync-mode = "automatic"; ++ maxim,timeout = <100>; ++ maxim,i2c-quirk = <0x6c>; ++ ++ port@0 { ++ max9286_des0ep0: endpoint@0 { ++ max9271-addr = <0x50>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ max9286_des0ep1: endpoint@1 { ++ max9271-addr = <0x51>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ max9286_des0ep2: endpoint@2 { ++ max9271-addr = <0x52>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ max9286_des0ep3: endpoint@3 { ++ max9271-addr = <0x53>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ max9286_csi0ep0: endpoint { ++ csi-rate = <700>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ ++ max9286-max9271@1 { ++ compatible = "maxim,max9286-max9271"; ++ reg = <0x6c>; ++ gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; ++ maxim,sensor_delay = <0>; ++ maxim,links = <4>; ++ maxim,lanes = <4>; ++ maxim,resetb-gpio = <1>; ++ maxim,fsync-mode = "automatic"; ++ maxim,timeout = <100>; ++ ++ port@0 { ++ max9286_des1ep0: endpoint@0 { ++ max9271-addr = <0x54>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in4>; ++ }; ++ max9286_des1ep1: endpoint@1 { ++ max9271-addr = <0x55>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in5>; ++ }; ++ max9286_des1ep2: endpoint@2 { ++ max9271-addr = <0x56>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in6>; ++ }; ++ max9286_des1ep3: endpoint@3 { ++ max9271-addr = <0x57>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in7>; ++ }; ++ }; ++ port@1 { ++ max9286_csi2ep0: endpoint { ++ csi-rate = <700>; ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ }; ++}; ++ ++&pcie_bus_clk { ++ clock-frequency = <100000000>; ++ status = "okay"; ++}; ++ ++&pciec1 { ++ status = "okay"; ++}; ++ ++&vin0 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin0ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ }; ++ port@1 { ++ csi0ep0: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin0_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ }; ++ }; ++}; ++ ++&vin1 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin1ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <1>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ }; ++ port@1 { ++ csi0ep1: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin1_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ }; ++ }; ++}; ++ ++&vin2 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin2ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <2>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ }; ++ port@1 { ++ csi0ep2: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin2_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ }; ++ }; ++}; ++ ++&vin3 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin3ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <3>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ csi0ep3: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin3_max9286_des0ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ }; ++ }; ++}; ++ ++&vin4 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin4ep0: endpoint { ++ csi,select = "csi41"; ++ virtual,channel = <0>; ++ remote-endpoint = <&ov106xx_in4>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep0: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin4_max9286_des1ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep0>; ++ }; ++ }; ++ }; ++}; ++ ++&vin5 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin5ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <1>; ++ remote-endpoint = <&ov106xx_in5>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep1: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin5_max9286_des1ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep1>; ++ }; ++ }; ++ }; ++}; ++ ++&vin6 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin6ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <2>; ++ remote-endpoint = <&ov106xx_in6>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep2: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin6_max9286_des1ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep2>; ++ }; ++ }; ++ }; ++}; ++ ++&vin7 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin7ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <3>; ++ remote-endpoint = <&ov106xx_in7>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep3: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin7_max9286_des1ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep3>; ++ }; ++ }; ++ }; ++}; ++ ++&csi2_40 { ++ status = "okay"; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "ycbcr422"; ++ receive,vc = <0>; ++ }; ++ csi2_vc1 { ++ data,type = "ycbcr422"; ++ receive,vc = <1>; ++ }; ++ csi2_vc2 { ++ data,type = "ycbcr422"; ++ receive,vc = <2>; ++ }; ++ csi2_vc3 { ++ data,type = "ycbcr422"; ++ receive,vc = <3>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_40_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ csi-rate = <300>; ++ }; ++ }; ++}; ++ ++&csi2_41 { ++ status = "okay"; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "ycbcr422"; ++ receive,vc = <0>; ++ }; ++ csi2_vc1 { ++ data,type = "ycbcr422"; ++ receive,vc = <1>; ++ }; ++ csi2_vc2 { ++ data,type = "ycbcr422"; ++ receive,vc = <2>; ++ }; ++ csi2_vc3 { ++ data,type = "ycbcr422"; ++ receive,vc = <3>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_41_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ csi-rate = <300>; ++ }; ++ }; ++}; +diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x-view.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x-view.dts +new file mode 100644 +index 0000000..3f3d66a +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x-view.dts +@@ -0,0 +1,552 @@ ++/* ++ * Device Tree Source for the Salvator-X.View board on r8a7795 ES1.x ++ * ++ * Copyright (C) 2016-2017 Renesas Electronics Corp. ++ * Copyright (C) 2015-2017 Cogent Embedded, Inc ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++#include "r8a7795-es1-salvator-x.dts" ++ ++/ { ++ model = "Renesas Salvator-X.View board based on r8a7795"; ++}; ++ ++&pfc { ++ can0_pins: can0 { ++ groups = "can0_data_a"; ++ function = "can0"; ++ }; ++ ++ can1_pins: can1 { ++ groups = "can1_data"; ++ function = "can1"; ++ }; ++}; ++ ++&i2c4 { ++ /delete-node/hdmi-in@34; ++ /delete-node/composite-in@70; ++ ++ ov106xx@0 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x60>; ++ ++ port@0 { ++ ov106xx_in0: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin0ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ }; ++ }; ++ ++ ov106xx@1 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x61>; ++ ++ port@0 { ++ ov106xx_in1: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin1ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ }; ++ }; ++ ++ ov106xx@2 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x62>; ++ ++ port@0 { ++ ov106xx_in2: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin2ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ }; ++ }; ++ ++ ov106xx@3 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x63>; ++ ++ port@0 { ++ ov106xx_in3: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin3ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_des0ep3: endpoint { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ }; ++ }; ++ ++ ov106xx@4 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x64>; ++ ++ port@0 { ++ ov106xx_in4: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin4ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep0>; ++ }; ++ }; ++ }; ++ ++ ov106xx@5 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x65>; ++ ++ port@0 { ++ ov106xx_in5: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin5ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep1>; ++ }; ++ }; ++ }; ++ ++ ov106xx@6 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x66>; ++ ++ port@0 { ++ ov106xx_in6: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin6ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep2>; ++ }; ++ }; ++ }; ++ ++ ov106xx@7 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x67>; ++ ++ port@0 { ++ ov106xx_in7: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin7ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_des1ep3: endpoint { ++ remote-endpoint = <&max9286_des1ep3>; ++ }; ++ }; ++ }; ++ ++ max9286-max9271@0 { ++ compatible = "maxim,max9286-max9271"; ++ reg = <0x4c>; ++ gpios = <&gpio6 30 GPIO_ACTIVE_LOW>; ++ maxim,sensor_delay = <0>; ++ maxim,links = <4>; ++ maxim,lanes = <4>; ++ maxim,resetb-gpio = <1>; ++ maxim,fsync-mode = "automatic"; ++ maxim,timeout = <100>; ++ maxim,i2c-quirk = <0x6c>; ++ ++ port@0 { ++ max9286_des0ep0: endpoint@0 { ++ max9271-addr = <0x50>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ max9286_des0ep1: endpoint@1 { ++ max9271-addr = <0x51>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ max9286_des0ep2: endpoint@2 { ++ max9271-addr = <0x52>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ max9286_des0ep3: endpoint@3 { ++ max9271-addr = <0x53>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ max9286_csi0ep0: endpoint { ++ csi-rate = <700>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ ++ max9286-max9271@1 { ++ compatible = "maxim,max9286-max9271"; ++ reg = <0x6c>; ++ maxim,sensor_delay = <0>; ++ maxim,links = <4>; ++ maxim,lanes = <4>; ++ maxim,resetb-gpio = <1>; ++ maxim,fsync-mode = "automatic"; ++ maxim,timeout = <100>; ++ ++ port@0 { ++ max9286_des1ep0: endpoint@0 { ++ max9271-addr = <0x54>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in4>; ++ }; ++ max9286_des1ep1: endpoint@1 { ++ max9271-addr = <0x55>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in5>; ++ }; ++ max9286_des1ep2: endpoint@2 { ++ max9271-addr = <0x56>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in6>; ++ }; ++ max9286_des1ep3: endpoint@3 { ++ max9271-addr = <0x57>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in7>; ++ }; ++ }; ++ port@1 { ++ max9286_csi2ep0: endpoint { ++ csi-rate = <700>; ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ }; ++}; ++ ++&vin0 { ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin0ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ }; ++ port@1 { ++ csi0ep0: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin0_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ }; ++ }; ++}; ++ ++&vin1 { ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin1ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <1>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ }; ++ port@1 { ++ csi0ep1: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin1_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ }; ++ }; ++}; ++ ++&vin2 { ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin2ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <2>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ }; ++ port@1 { ++ csi0ep2: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin2_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ }; ++ }; ++}; ++ ++&vin3 { ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin3ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <3>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ csi0ep3: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin3_max9286_des0ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ }; ++ }; ++}; ++ ++&vin4 { ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin4ep0: endpoint { ++ csi,select = "csi41"; ++ virtual,channel = <0>; ++ remote-endpoint = <&ov106xx_in4>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep0: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin4_max9286_des1ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep0>; ++ }; ++ }; ++ }; ++}; ++ ++&vin5 { ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin5ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <1>; ++ remote-endpoint = <&ov106xx_in5>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep1: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin5_max9286_des1ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep1>; ++ }; ++ }; ++ }; ++}; ++ ++&vin6 { ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin6ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <2>; ++ remote-endpoint = <&ov106xx_in6>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep2: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin6_max9286_des1ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep2>; ++ }; ++ }; ++ }; ++}; ++ ++&vin7 { ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin7ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <3>; ++ remote-endpoint = <&ov106xx_in7>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep3: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin7_max9286_des1ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep3>; ++ }; ++ }; ++ }; ++}; ++ ++&csi2_20 { ++ status = "disabled"; ++ /delete-node/ports; ++}; ++ ++&csi2_40 { ++ /delete-node/ports; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "ycbcr422"; ++ receive,vc = <0>; ++ }; ++ csi2_vc1 { ++ data,type = "ycbcr422"; ++ receive,vc = <1>; ++ }; ++ csi2_vc2 { ++ data,type = "ycbcr422"; ++ receive,vc = <2>; ++ }; ++ csi2_vc3 { ++ data,type = "ycbcr422"; ++ receive,vc = <3>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_40_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ csi-rate = <300>; ++ }; ++ }; ++}; ++ ++&csi2_41 { ++ status = "okay"; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "ycbcr422"; ++ receive,vc = <0>; ++ }; ++ csi2_vc1 { ++ data,type = "ycbcr422"; ++ receive,vc = <1>; ++ }; ++ csi2_vc2 { ++ data,type = "ycbcr422"; ++ receive,vc = <2>; ++ }; ++ csi2_vc3 { ++ data,type = "ycbcr422"; ++ receive,vc = <3>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_41_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ csi-rate = <300>; ++ }; ++ }; ++}; ++ ++&can0 { ++ pinctrl-0 = <&can0_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++}; ++ ++&can1 { ++ pinctrl-0 = <&can1_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++}; +diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-alfa.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-alfa.dts +new file mode 100644 +index 0000000..ae115bd +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-alfa.dts +@@ -0,0 +1,22 @@ ++/* ++ * Device Tree Source for the H3ULCB.HAD board Alfa side ++ * ++ * Copyright (C) 2017 Renesas Electronics Corp. ++ * Copyright (C) 2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++#include "r8a7795-h3ulcb-had.dtsi" ++ ++/ { ++ model = "Renesas H3ULCB.HAD board Alfa side based on r8a7795"; ++}; ++ ++&pciec0 { ++ status = "okay"; ++ ++ /* Root complex */ ++}; +diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-beta.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-beta.dts +new file mode 100644 +index 0000000..805067e +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-beta.dts +@@ -0,0 +1,23 @@ ++/* ++ * Device Tree Source for the H3ULCB.HAD board Beta side ++ * ++ * Copyright (C) 2017 Renesas Electronics Corp. ++ * Copyright (C) 2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++#include "r8a7795-h3ulcb-had.dtsi" ++ ++/ { ++ model = "Renesas H3ULCB.HAD board Beta side based on r8a7795"; ++}; ++ ++&pciec0 { ++ status = "okay"; ++ ++ /* Endpoint */ ++ endpoint; ++}; +diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi +new file mode 100644 +index 0000000..4a00426 +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi +@@ -0,0 +1,219 @@ ++/* ++ * Device Tree Source for the H3ULCB.HAD board on r8a7795 ++ * ++ * Copyright (C) 2016-2017 Renesas Electronics Corp. ++ * Copyright (C) 2016-2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++/* ++ * MSIOF0 - /dev/spidev1.0 connected to FPGA ethernet switch (both sides) ++ * MSIOF1 - /dev/spidev2.0 connected to RH850 (sideA to CSIH1, sideB to CSIH0) ++ */ ++ ++#include "r8a7795-h3ulcb-view.dts" ++ ++/ { ++ model = "Renesas H3ULCB.HAD board based on r8a7795"; ++ ++ aliases { ++ serial1 = &scif1; ++ spi1 = &spi0_gpio; ++ spi2 = &spi1_gpio; ++ }; ++ ++ chosen { ++ stdout-path = "serial1:115200n8"; ++ }; ++ ++ spi0_gpio: spi_gpio@0 { ++ compatible = "spi-gpio"; ++ num-chipselects = <1>; ++ gpio-sck = <&gpio5 17 0>; ++ gpio-mosi = <&gpio5 20 0>; ++ gpio-miso = <&gpio5 22 0>; ++ cs-gpios = <&gpio5 19 0>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ spidev@0 { ++ compatible = "spi-gpio"; ++ reg = <0>; ++ spi-max-frequency = <2000000>; ++ spi-cpha; ++ spi-cpol; ++ }; ++ }; ++ ++ spi1_gpio: spi_gpio@1 { ++ compatible = "spi-gpio"; ++ num-chipselects = <1>; ++ gpio-sck = <&gpio6 8 0>; ++ gpio-mosi = <&gpio6 7 0>; ++ gpio-miso = <&gpio6 10 0>; ++ cs-gpios = <&gpio6 5 0>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ spidev@0 { ++ compatible = "spi-gpio"; ++ reg = <0>; ++ spi-max-frequency = <2000000>; ++ spi-cpha; ++ spi-cpol; ++ }; ++ }; ++ ++ hdmi1-out { ++ compatible = "hdmi-connector"; ++ type = "a"; ++ ++ port { ++ hdmi1_con: endpoint { ++ remote-endpoint = <&rcar_dw_hdmi1_out>; ++ }; ++ }; ++ }; ++}; ++ ++&du { ++ ports { ++ port@1 { ++ endpoint { ++ remote-endpoint = <&rcar_dw_hdmi0_in>; ++ }; ++ }; ++ port@2 { ++ endpoint { ++ remote-endpoint = <&rcar_dw_hdmi1_in>; ++ }; ++ }; ++ }; ++}; ++ ++&hdmi1 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ port@0 { ++ reg = <0>; ++ rcar_dw_hdmi1_in: endpoint { ++ remote-endpoint = <&du_out_hdmi1>; ++ }; ++ }; ++ port@1 { ++ reg = <1>; ++ rcar_dw_hdmi1_out: endpoint { ++ remote-endpoint = <&hdmi1_con>; ++ }; ++ }; ++ }; ++}; ++ ++&pfc { ++ scif1_pins: scif1 { ++ groups = "scif1_data_a"; ++ function = "scif1"; ++ }; ++ ++ msiof0_pins: spi1 { ++ groups = "msiof0_clk", "msiof0_rxd", "msiof0_txd", ++ "msiof0_ss1"; ++ function = "msiof0"; ++ }; ++ ++ msiof1_pins: spi2 { ++ groups = "msiof1_clk_a", "msiof1_rxd_a", "msiof1_txd_a", ++ "msiof1_ss1_a"; ++ function = "msiof1"; ++ }; ++ ++ sound_clk_pins: sound-clk { ++ groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a", ++ "audio_clkout_a" /*, "audio_clkout3_a"*/; ++ function = "audio_clk"; ++ }; ++ ++ usb31_pins: usb31 { ++ groups = "usb31"; ++ function = "usb31"; ++ }; ++ ++ can0_pins: can0 { ++ groups = "can0_data_a"; ++ function = "can0"; ++ }; ++ ++ canfd0_pins: canfd0 { ++ groups = "canfd0_data_a"; ++ function = "canfd0"; ++ }; ++}; ++ ++&scif1 { ++ pinctrl-0 = <&scif1_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++}; ++ ++&avb { ++ /delete-property/phy-handle; ++ /delete-property/phy-gpios; ++ /delete-node/ethernet-phy@0; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++}; ++ ++&msiof0 { ++ pinctrl-0 = <&msiof0_pins>; ++ pinctrl-names = "default"; ++ status = "disabled"; ++ cs-gpios = <&gpio5 19 0>; ++ ++ spidev@0 { ++ compatible = "renesas,sh-msiof"; ++ reg = <0>; ++ spi-max-frequency = <66666666>; ++ spi-cpha; ++ spi-cpol; ++ }; ++}; ++ ++&msiof1 { ++ status = "disabled"; ++ cs-gpios = <&gpio6 5 0>; ++}; ++ ++&can0 { ++ pinctrl-0 = <&can0_pins>; ++ pinctrl-names = "default"; ++ status = "disabled"; ++ ++ renesas,can-clock-select = <0x0>; ++ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH /* enable - shared with camera board */ ++ &gpio2 7 GPIO_ACTIVE_LOW /* standby */ ++ >; ++}; ++ ++&canfd { ++ pinctrl-0 = <&canfd0_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ ++ renesas,can-clock-select = <0x0>; ++ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH /* enable - shared with camera board */ ++ &gpio2 7 GPIO_ACTIVE_LOW /* standby */ ++ >; ++ ++ channel0 { ++ status = "okay"; ++ }; ++}; +diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts +new file mode 100644 +index 0000000..4b10d31 +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts +@@ -0,0 +1,443 @@ ++/* ++ * Device Tree Source for the H3ULCB Kingfisher V1 board ++ * ++ * Copyright (C) 2017 Renesas Electronics Corp. ++ * Copyright (C) 2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++#include "r8a7795-h3ulcb-kf.dts" ++ ++/ { ++ model = "Renesas H3ULCB Kingfisher V1 board based on r8a7795"; ++ ++ aliases { ++ serial1 = &hscif0; ++ serial2 = &hscif1; ++ serial3 = &scif1; ++ }; ++ ++ wlan_en: regulator@4 { ++ compatible = "regulator-fixed"; ++ regulator-name = "wlan-en-regulator"; ++ ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_74 4 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ }; ++ ++ codec_en_reg: regulator@6 { ++ compatible = "regulator-fixed"; ++ regulator-name = "codec-en-regulator"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_74 15 0>; ++ ++ /* delay - CHECK */ ++ startup-delay-us = <70000>; ++ enable-active-high; ++ }; ++ ++ amp_en_reg: regulator@7 { ++ compatible = "regulator-fixed"; ++ regulator-name = "amp-en-regulator"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_74 0 0>; ++ ++ startup-delay-us = <0>; ++ enable-active-high; ++ }; ++ ++ /delete-node/regulator@8; ++ ++ sdio_switch: regulator@9 { ++ compatible = "regulator-fixed"; ++ regulator-name = "wifi_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_74 5 0>; ++ enable-active-low; ++ regulator-always-on; ++ }; ++ ++ /delete-node/regulator@10; ++ ++ radio_switch: regulator@11 { ++ compatible = "regulator-fixed"; ++ regulator-name = "radio_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_74 13 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ kim { ++ compatible = "kim"; ++ nshutdown_gpio = <343>; /* gpio_ext_74 pin 3 */ ++ /* serial1 */ ++ dev_name = "/dev/ttySC1"; ++ flow_cntrl = <1>; ++ /* int div 8 hscif@26.6666656MHz */ ++ baud_rate = <3333332>; ++ }; ++ ++ hdmi-out { ++ compatible = "hdmi-connector"; ++ type = "a"; ++ ++ port { ++ hdmi_con: endpoint { ++ remote-endpoint = <&adv7513_out>; ++ }; ++ }; ++ }; ++}; ++ ++&pfc { ++ /delete-node/hscif4; ++ ++ scif1_pins: scif1 { ++ groups = "scif1_data_b"; ++ function = "scif1"; ++ }; ++ ++ hscif0_pins: hscif0 { ++ groups = "hscif0_data", "hscif0_ctrl"; ++ function = "hscif0"; ++ }; ++ ++ hscif1_pins: hscif1 { ++ groups = "hscif1_data_a", "hscif1_ctrl_a"; ++ function = "hscif1"; ++ }; ++ ++ du_pins: du { ++ groups = "du_rgb888", "du_sync", "du_clk_out_0", "du_disp"; ++ function = "du"; ++ }; ++}; ++ ++&du { ++ pinctrl-0 = <&du_pins>; ++ pinctrl-names = "default"; ++ ++ ports { ++ port@0 { ++ endpoint { ++ remote-endpoint = <&adv7513_in>; ++ }; ++ }; ++ port@1 { ++ endpoint { ++ remote-endpoint = <&rcar_dw_hdmi0_in>; ++ }; ++ }; ++ }; ++}; ++ ++&gpio0 { ++ /delete-node/video_a_irq; ++ /delete-node/video_b_irq; ++ /delete-node/gpioext_2_20_irq; ++}; ++ ++&gpio1 { ++ /delete-node/gpioext_2_21_irq; ++ /delete-node/wifi_irq; ++}; ++ ++&gpio2 { ++ bl_pwm { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "BL PWM 100%"; ++ }; ++}; ++ ++&gpio5 { ++ /delete-node/touch_irq; ++ /delete-node/bt_strap; ++ ++ /* V1 has h/w bug with swapped RTS and CTS on BT interface */ ++ /* Ignore these pins */ ++ hscif0_cts { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "hscif0 CTS"; ++ }; ++ ++ hscif0_rts { ++ gpio-hog; ++ gpios = <16 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "hscif0 RTS"; ++ }; ++}; ++ ++&gpio7 { ++ /delete-node/gpioext_2_21_irq; ++}; ++ ++&scif1 { ++ pinctrl-0 = <&scif1_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++}; ++ ++&hscif0 { ++ pinctrl-0 = <&hscif0_pins>; ++ pinctrl-names = "default"; ++ ctsrts; ++ ++ status = "okay"; ++}; ++ ++&hscif1 { ++ pinctrl-0 = <&hscif1_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++}; ++ ++&hscif4 { ++ /delete-property/pinctrl-0; ++ /delete-property/pinctrl-names; ++ ++ status = "disabled"; ++}; ++ ++&i2c2 { ++ /delete-node/pca9535@20; ++ /delete-node/pca9535@21; ++ ++ gpio_ext_74: pca9539@74 { ++ compatible = "nxp,pca9539"; ++ reg = <0x74>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio6>; ++ interrupts = <8 IRQ_TYPE_EDGE_FALLING>; ++ ++ hub_pwen { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "HUB pwen"; ++ }; ++ hub_rst { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "HUB rst"; ++ }; ++ otg_offvbus { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "OTG off VBUSn"; ++ }; ++ otg_extlpn { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "OTG EXTLPn"; ++ }; ++ otg_stat1 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "OTG Stat1"; ++ }; ++ otg_stat2 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "OTG Stat2"; ++ }; ++ }; ++ ++ gpio_ext_75: pca9539@75 { ++ compatible = "nxp,pca9539"; ++ reg = <0x75>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio6>; ++ interrupts = <4 IRQ_TYPE_EDGE_FALLING>; ++ ++ gps_rst { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "GPS rst"; ++ }; ++ fpdl_shdn { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "FPDLink shdn"; ++ }; ++ }; ++}; ++ ++&i2cswitch2 { ++ reg = <0x71>; ++ reset-gpios= <&gpio5 3 GPIO_ACTIVE_LOW>; ++ ++ i2c@4 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <4>; ++ ++ hdmi@3d { ++ compatible = "adi,adv7511w"; ++ reg = <0x3d>; ++ interrupt-parent = <&gpio2>; ++ interrupts = <0 IRQ_TYPE_EDGE_BOTH>; ++ pd-gpios = <&gpio_ext_75 5 GPIO_ACTIVE_LOW>; ++ ++ adi,input-depth = <8>; ++ adi,input-colorspace = "rgb"; ++ adi,input-clock = "1x"; ++ adi,input-style = <1>; ++ adi,input-justification = "evenly"; ++ adi,clock-delay = <1200>; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ adv7513_in: endpoint { ++ remote-endpoint = <&du_out_rgb>; ++ }; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ adv7513_out: endpoint { ++ remote-endpoint = <&hdmi_con>; ++ }; ++ }; ++ }; ++ }; ++ }; ++}; ++ ++&i2c4 { ++ /delete-node/pca9535@21; ++ ++ gpio_ext_76: pca9539@76 { ++ compatible = "nxp,pca9539"; ++ reg = <0x76>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio7>; ++ interrupts = <3 IRQ_TYPE_EDGE_FALLING>; ++ ++ port_b_a0 { ++ gpio-hog; ++ gpios = <0 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B A0"; ++ }; ++ port_b_a1 { ++ gpio-hog; ++ gpios = <1 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B A1"; ++ }; ++ port_a_a0 { ++ gpio-hog; ++ gpios = <2 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A A0"; ++ }; ++ port_a_a1 { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A A1"; ++ }; ++ /* pin 12 - CAM_CLK */ ++ rpi_cam_io_1 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "RaspB_IO1"; ++ }; ++ /* pin 11 - CAM_GPIO - assume pwdn */ ++ rpi_cam_io_0 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "RaspB_IO0"; ++ }; ++ /* 0 - FPDLink output, 1 - LVDS output */ ++ lvds_vs_fpdl { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "LVDS switch"; ++ }; ++ }; ++ ++ gpio_ext_77: pca9539@77 { ++ compatible = "nxp,pca9539"; ++ reg = <0x77>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio5>; ++ interrupts = <9 IRQ_TYPE_EDGE_FALLING>; ++ ++ mpcie_wake { ++ gpio-hog; ++ gpios = <0 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "mPCIe WAKE#"; ++ }; ++ mpcie_wdisable { ++ gpio-hog; ++ gpios = <1 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "mPCIe W_DISABLE"; ++ }; ++ mpcie_clreq { ++ gpio-hog; ++ gpios = <2 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "mPCIe CLKREQ#"; ++ }; ++ mpcie_ovc { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "mPCIe OVC"; ++ }; ++ }; ++}; ++ ++&i2cswitch4 { ++ reg = <0x71>; ++ reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>; ++}; ++ ++&wlcore { ++ interrupts = <25 IRQ_TYPE_EDGE_FALLING>; ++}; +diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts +new file mode 100644 +index 0000000..2c50230 +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts +@@ -0,0 +1,1651 @@ ++/* ++ * Device Tree Source for the H3ULCB Kingfisher board on r8a7795 ++ * ++ * Copyright (C) 2017 Renesas Electronics Corp. ++ * Copyright (C) 2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++#include "r8a7795-h3ulcb.dts" ++ ++/ { ++ model = "Renesas H3ULCB Kingfisher board based on r8a7795"; ++ ++ aliases { ++ serial1 = &hscif4; ++ }; ++ ++ snd_clk: snd_clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <24576000>; ++ clock-output-names = "scki"; ++ }; ++ ++ wlan_en: regulator@4 { ++ compatible = "regulator-fixed"; ++ regulator-name = "wlan-en-regulator"; ++ ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_20 4 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ }; ++ ++ vcc_sdhi3: regulator@41 { ++ compatible = "regulator-fixed"; ++ ++ regulator-name = "SDHI3 Vcc"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ ++ vccq_sdhi3: regulator@5 { ++ compatible = "regulator-fixed"; ++ ++ regulator-name = "SDHI3 VccQ"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ }; ++ ++ codec_en_reg: regulator@6 { ++ compatible = "regulator-fixed"; ++ regulator-name = "codec-en-regulator"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_20 15 0>; ++ ++ /* delay - CHECK */ ++ startup-delay-us = <70000>; ++ enable-active-high; ++ }; ++ ++ amp_en_reg: regulator@7 { ++ compatible = "regulator-fixed"; ++ regulator-name = "amp-en-regulator"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_20 0 0>; ++ ++ startup-delay-us = <0>; ++ enable-active-high; ++ }; ++ ++ lvds_switch: regulator@8 { ++ compatible = "regulator-fixed"; ++ regulator-name = "lvds_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio1 24 0>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ sdio_switch: regulator@9 { ++ compatible = "regulator-fixed"; ++ regulator-name = "wifi_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_20 5 0>; ++ enable-active-low; ++ regulator-always-on; ++ }; ++ ++ sound_switch: regulator@10 { ++ compatible = "regulator-fixed"; ++ regulator-name = "pcm3168a_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_21 5 0>; ++ enable-active-low; ++ regulator-always-on; ++ }; ++ ++ radio_switch: regulator@11 { ++ compatible = "regulator-fixed"; ++ regulator-name = "radio_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_20 13 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ kim { ++ compatible = "kim"; ++ nshutdown_gpio = <343>; /* pca9535@i2c2.0x20 pin 3 */ ++ /* serial1 */ ++ dev_name = "/dev/ttySC1"; ++ flow_cntrl = <1>; ++ /* int div 8 hscif@26.6666656MHz */ ++ baud_rate = <3333332>; ++ }; ++ ++ btwilink { ++ compatible = "btwilink"; ++ }; ++ ++ sound_ext: sound@0 { ++ pinctrl-0 = <&sound_0_pins>; ++ pinctrl-names = "default"; ++ compatible = "simple-audio-card"; ++ ++ simple-audio-card,format = "left_j"; ++ simple-audio-card,name = "pcm3168a"; ++ ++ simple-audio-card,bitclock-master = <&sound_ext_master>; ++ simple-audio-card,frame-master = <&sound_ext_master>; ++ sound_ext_master: simple-audio-card,cpu@0 { ++ sound-dai = <&rcar_sound 0>; ++ dai-tdm-slot-num = <8>; ++ dai-tdm-slot-width = <32>; ++ }; ++ ++ simple-audio-card,codec@0 { ++ sound-dai = <&pcm3168a>; ++ dai-tdm-slot-num = <8>; ++ dai-tdm-slot-width = <32>; ++ system-clock-frequency = <24576000>; ++ }; ++ }; ++ ++ /delete-node/sound; ++ ++ rsnd_ak4613: sound@1 { ++ pinctrl-0 = <&sound_1_pins>; ++ pinctrl-names = "default"; ++ compatible = "simple-audio-card"; ++ ++ simple-audio-card,format = "left_j"; ++ simple-audio-card,name = "ak4613"; ++ ++ simple-audio-card,bitclock-master = <&sndcpu>; ++ simple-audio-card,frame-master = <&sndcpu>; ++ ++ sndcpu: simple-audio-card,cpu@1 { ++ sound-dai = <&rcar_sound 1>; ++ }; ++ ++ sndcodec: simple-audio-card,codec@1 { ++ sound-dai = <&ak4613>; ++ }; ++ }; ++ ++ sound_radio: sound@2 { ++ pinctrl-0 = <&sound_2_pins>; ++ pinctrl-names = "default"; ++ compatible = "simple-audio-card"; ++ ++ simple-audio-card,format = "i2s"; ++ simple-audio-card,name = "radio"; ++ ++ simple-audio-card,bitclock-master = <&sound_radio_master>; ++ simple-audio-card,frame-master = <&sound_radio_master>; ++ simple-audio-card,cpu@2 { ++ sound-dai = <&rcar_sound 2>; ++ }; ++ ++ sound_radio_master: simple-audio-card,codec@2 { ++ sound-dai = <&radio>; ++ system-clock-frequency = <12288000>; ++ }; ++ }; ++ ++ lvds-encoder { ++ compatible = "thine,thc63lvdm83d"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ port@0 { ++ reg = <0>; ++ lvds_enc_in: endpoint { ++ remote-endpoint = <&du_out_lvds0>; ++ }; ++ }; ++ port@1 { ++ reg = <1>; ++ lvds_enc_out: endpoint { ++ remote-endpoint = <&lvds_in>; ++ }; ++ }; ++ }; ++ }; ++ ++ lvds { ++ compatible = "lvds-connector"; ++ ++ width-mm = <210>; ++ height-mm = <158>; ++ ++ panel-timing { ++ /* 1280x800 @60Hz */ ++ clock-frequency = <65000000>; ++ hactive = <1280>; ++ vactive = <800>; ++ hsync-len = <40>; ++ hfront-porch = <80>; ++ hback-porch = <40>; ++ vfront-porch = <14>; ++ vback-porch = <14>; ++ vsync-len = <4>; ++ }; ++ ++ port { ++ lvds_in: endpoint { ++ remote-endpoint = <&lvds_enc_out>; ++ }; ++ }; ++ }; ++ ++ radio: si468x@0 { ++ compatible = "si,si468x-pcm"; ++ status = "okay"; ++ ++ #sound-dai-cells = <0>; ++ }; ++}; ++ ++&pfc { ++ hscif4_pins: hscif4 { ++ groups = "hscif4_data_a", "hscif4_ctrl"; ++ function = "hscif4"; ++ }; ++ ++ sdhi3_pins_3v3: sd3_3v3 { ++ groups = "sdhi3_data4", "sdhi3_ctrl"; ++ function = "sdhi3"; ++ power-source = <3300>; ++ }; ++ ++ sound_0_pins: sound0 { ++ groups = "ssi78_ctrl", "ssi7_data", "ssi8_data"; ++ function = "ssi"; ++ }; ++ ++ sound_1_pins: sound1 { ++ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; ++ function = "ssi"; ++ }; ++ ++ sound_2_pins: sound2 { ++ groups = "ssi6_ctrl", "ssi6_data"; ++ function = "ssi"; ++ }; ++ ++ usb0_pins: usb0 { ++ groups = "usb0"; ++ function = "usb0"; ++ }; ++ ++ can0_pins: can0 { ++ groups = "can0_data_a"; ++ function = "can0"; ++ }; ++ ++ can1_pins: can1 { ++ groups = "can1_data"; ++ function = "can1"; ++ }; ++ ++ canfd0_pins: canfd0 { ++ groups = "canfd0_data_a"; ++ function = "canfd0"; ++ }; ++ ++ canfd1_pins: canfd1 { ++ groups = "canfd1_data"; ++ function = "canfd1"; ++ }; ++}; ++ ++&gpio0 { ++ video_a_irq { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A irq"; ++ }; ++ ++ video_b_irq { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B irq"; ++ }; ++ ++ gpioext_2_20_irq { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "0x20@i2c2 irq"; ++ }; ++}; ++ ++&gpio1 { ++ gpioext_2_21_irq { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "0x21@i2c2 irq"; ++ }; ++ ++ wifi_irq { ++ gpio-hog; ++ gpios = <25 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "wifi irq"; ++ }; ++}; ++ ++&gpio5 { ++ touch_irq { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "touch irq"; ++ }; ++ ++ /* From TI forum */ ++ /* BT_AUD_OUT should be pulled low when WL_EN is activated. */ ++ /* in case it isn't, wilink8 ends up in one of the test modes that introduces various issues */ ++ bt_strap { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "BT strap pin"; ++ }; ++}; ++ ++&gpio7 { ++ gpioext_2_21_irq { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "0x21@i2c4 irq"; ++ }; ++}; ++ ++&hscif4 { ++ pinctrl-0 = <&hscif4_pins>; ++ pinctrl-names = "default"; ++ ctsrts; ++ ++ status = "okay"; ++}; ++ ++&i2c2 { ++ clock-frequency = <400000>; ++ ++ gpio_ext_20: pca9535@20 { ++ compatible = "nxp,pca9535"; ++ reg = <0x20>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio0>; ++ interrupts = <15 IRQ_TYPE_EDGE_FALLING>; ++ }; ++ ++ gpio_ext_21: pca9535@21 { ++ compatible = "nxp,pca9535"; ++ reg = <0x21>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio1>; ++ interrupts = <15 IRQ_TYPE_EDGE_FALLING>; ++ }; ++ ++ i2cswitch2: pca9548@74 { ++ compatible = "nxp,pca9548"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x74>; ++ reset-gpios = <&gpio6 5 GPIO_ACTIVE_LOW>; ++ ++ i2c@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ /* BCM node(s) */ ++ }; ++ ++ i2c@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <1>; ++ /* USB3.0 HUB node(s) */ ++ }; ++ ++ i2c@2 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <2>; ++ /* Power amp node(s) */ ++ }; ++ ++ i2c@3 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <3>; ++ /* Radio node(s) */ ++ }; ++ ++ i2c@4 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <4>; ++ /* A2B node(s) */ ++ }; ++ ++ i2c@5 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <5>; ++ /* PCIe node(s) */ ++ }; ++ ++ i2c@6 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <6>; ++ /* LVDS display node(s) */ ++ ++ polytouch: edt-ft5x06@38 { ++ compatible = "edt,edt-ft5x06"; ++ reg = <0x38>; ++ interrupt-parent = <&gpio5>; ++ interrupts = <6 IRQ_TYPE_EDGE_FALLING>; ++ }; ++ }; ++ ++ i2c@7 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <7>; ++ /* Audio, GPS and Gyro node(s) */ ++ ++ pcm3168a: audio-codec@44 { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm3168a"; ++ reg = <0x44>; ++ clocks = <&snd_clk>; ++ clock-names = "scki"; ++ tdm; ++ VDD1-supply = <&codec_en_reg>; ++ VDD2-supply = <&codec_en_reg>; ++ VCCAD1-supply = <&codec_en_reg>; ++ VCCAD2-supply = <&codec_en_reg>; ++ VCCDA1-supply = <&_en_reg>; ++ VCCDA2-supply = <&_en_reg>; ++ }; ++ ++ lsm9ds0_acc_mag@1d { ++ compatible = "st,lsm9ds0_acc_mag"; ++ reg = <0x1d>; ++ }; ++ ++ lsm9ds0_gyr@6b { ++ compatible = "st,lsm9ds0-gyro"; ++ reg = <0x6b>; ++ }; ++ ++ /* GPS@ 0x42 */ ++ }; ++ }; ++}; ++ ++&i2c4 { ++ gpio_ext_22: pca9535@21 { ++ compatible = "nxp,pca9535"; ++ reg = <0x22>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio7>; ++ interrupts = <3 IRQ_TYPE_EDGE_FALLING>; ++ ++ /* pin 12 - CAM_CLK */ ++ rpi_cam_io_1 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "RaspB_IO1"; ++ }; ++ /* pin 11 - CAM_GPIO - assume pwdn */ ++ rpi_cam_io_0 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "RaspB_IO0"; ++ }; ++ }; ++ ++ i2cswitch4: pca9548@74 { ++ compatible = "nxp,pca9548"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x74>; ++ reset-gpios= <&gpio6 21 GPIO_ACTIVE_LOW>; ++ ++ i2c@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ /* SAM node(s) */ ++ }; ++ ++ i2c@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <1>; ++ /* Slot A (CN10) */ ++ ++ ov106xx@0 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x60>; ++ ++ port@0 { ++ ov106xx_in0: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin0ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ ov106xx_ti964_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep0>; ++ }; ++ ov106xx_ti954_des0ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep0>; ++ }; ++ }; ++ }; ++ ++ ov106xx@1 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x61>; ++ ++ port@0 { ++ ov106xx_in1: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin1ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ ov106xx_ti964_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep1>; ++ }; ++ ov106xx_ti954_des0ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep1>; ++ }; ++ }; ++ }; ++ ++ ov106xx@2 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x62>; ++ ++ port@0 { ++ ov106xx_in2: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin2ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ ov106xx_ti964_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep2>; ++ }; ++ }; ++ }; ++ ++ ov106xx@3 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x63>; ++ ++ port@0 { ++ ov106xx_in3: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin3ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ ov106xx_ti964_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep3>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB964 @ 0x3a */ ++ ti964-ti9x3@0 { ++ compatible = "ti,ti964-ti9x3"; ++ reg = <0x3a>; ++ gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; ++ ti,sensor_delay = <350>; ++ ti,links = <4>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "coax"; ++ ++ port@0 { ++ ti964_des0ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ ti964_des0ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ ti964_des0ep2: endpoint@2 { ++ ti9x3-addr = <0x0e>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ ti964_des0ep3: endpoint@3 { ++ ti9x3-addr = <0x0f>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ ti964_csi0ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB954 @ 0x38 */ ++ ti954-ti9x3@0 { ++ compatible = "ti,ti954-ti9x3"; ++ reg = <0x38>; ++ gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; ++ ti,sensor_delay = <350>; ++ ti,links = <2>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "coax"; ++ ++ port@0 { ++ ti954_des0ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ ti954_des0ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ }; ++ port@1 { ++ ti954_csi0ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ ++ /* MAX9286 @ 0x2a */ ++ max9286-max9271@0 { ++ compatible = "maxim,max9286-max9271"; ++ reg = <0x2a>; ++ maxim,sensor_delay = <350>; ++ maxim,links = <4>; ++ maxim,lanes = <4>; ++ maxim,resetb-gpio = <1>; ++ maxim,fsync-mode = "automatic"; ++ maxim,timeout = <100>; ++ ++ port@0 { ++ max9286_des0ep0: endpoint@0 { ++ max9271-addr = <0x50>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ max9286_des0ep1: endpoint@1 { ++ max9271-addr = <0x51>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ max9286_des0ep2: endpoint@2 { ++ max9271-addr = <0x52>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ max9286_des0ep3: endpoint@3 { ++ max9271-addr = <0x53>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ max9286_csi0ep0: endpoint { ++ csi-rate = <700>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ }; ++ ++ i2c@2 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <2>; ++ /* Slot B (CN11) */ ++ ++ ov106xx@4 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x64>; ++ ++ port@0 { ++ ov106xx_in4: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin4ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep0>; ++ }; ++ ov106xx_ti964_des1ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep0>; ++ }; ++ ov106xx_ti954_des1ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep0>; ++ }; ++ }; ++ }; ++ ++ ov106xx@5 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x65>; ++ ++ port@0 { ++ ov106xx_in5: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin5ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep1>; ++ }; ++ ov106xx_ti964_des1ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep1>; ++ }; ++ ov106xx_ti954_des1ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep1>; ++ }; ++ }; ++ }; ++ ++ ov106xx@6 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x66>; ++ ++ port@0 { ++ ov106xx_in6: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin6ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep2>; ++ }; ++ ov106xx_ti964_des1ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep2>; ++ }; ++ }; ++ }; ++ ++ ov106xx@7 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x67>; ++ ++ port@0 { ++ ov106xx_in7: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin7ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep3>; ++ }; ++ ov106xx_ti964_des1ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep3>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB964 @ 0x3a */ ++ ti964-ti9x3@1 { ++ compatible = "ti,ti964-ti9x3"; ++ reg = <0x3a>; ++ gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>; ++ ti,sensor_delay = <350>; ++ ti,links = <4>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "coax"; ++ ++ port@0 { ++ ti964_des1ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in4>; ++ }; ++ ti964_des1ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in5>; ++ }; ++ ti964_des1ep2: endpoint@2 { ++ ti9x3-addr = <0x0e>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in6>; ++ }; ++ ti964_des1ep3: endpoint@3 { ++ ti9x3-addr = <0x0f>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in7>; ++ }; ++ }; ++ port@1 { ++ ti964_csi2ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB954 @ 0x38 */ ++ ti954-ti9x3@1 { ++ compatible = "ti,ti954-ti9x3"; ++ reg = <0x38>; ++ gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>; ++ ti,sensor_delay = <350>; ++ ti,links = <2>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "coax"; ++ ++ port@0 { ++ ti954_des1ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in4>; ++ }; ++ ti954_des1ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in5>; ++ }; ++ }; ++ port@1 { ++ ti954_csi2ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ }; ++ ++ /* MAX9286 @ 0x2a */ ++ max9286-max9271@1 { ++ compatible = "maxim,max9286-max9271"; ++ reg = <0x2a>; ++ maxim,sensor_delay = <350>; ++ maxim,links = <4>; ++ maxim,lanes = <4>; ++ maxim,resetb-gpio = <1>; ++ maxim,fsync-mode = "automatic"; ++ maxim,timeout = <100>; ++ ++ port@0 { ++ max9286_des1ep0: endpoint@0 { ++ max9271-addr = <0x50>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in4>; ++ }; ++ max9286_des1ep1: endpoint@1 { ++ max9271-addr = <0x51>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in5>; ++ }; ++ max9286_des1ep2: endpoint@2 { ++ max9271-addr = <0x52>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in6>; ++ }; ++ max9286_des1ep3: endpoint@3 { ++ max9271-addr = <0x53>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in7>; ++ }; ++ }; ++ port@1 { ++ max9286_csi2ep0: endpoint { ++ csi-rate = <700>; ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ }; ++ }; ++ ++ i2c@6 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <6>; ++ /* Slot B (CN11) */ ++ ++ video_b_ext0: pca9535@27 { ++ compatible = "nxp,pca9535"; ++ reg = <0x27>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_b_des_cfg1 { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B cfg1"; ++ }; ++ video_b_des_cfg0 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B cfg0"; ++ }; ++ video_b_pwr_shdn { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR_SHDN"; ++ }; ++ video_b_cam_pwr0 { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR0"; ++ }; ++ video_b_cam_pwr1 { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR1"; ++ }; ++ video_b_cam_pwr2 { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR2"; ++ }; ++ video_b_cam_pwr3 { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR3"; ++ }; ++ video_b_des_shdn { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B DES_SHDN"; ++ }; ++ video_b_des_led { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B led"; ++ }; ++ }; ++ ++ video_b_ext1: max7325@5c { ++ compatible = "maxim,max7325"; ++ reg = <0x5c>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_b_des_cfg2 { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B cfg2"; ++ }; ++ video_b_des_cfg1 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B cfg1"; ++ }; ++ video_b_des_cfg0 { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B cfg0"; ++ }; ++ video_b_pwr_shdn { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR_SHDN"; ++ }; ++ video_b_cam_pwr0 { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR0"; ++ }; ++ video_b_cam_pwr1 { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR1"; ++ }; ++ video_b_cam_pwr3 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR3"; ++ }; ++ }; ++ }; ++ ++ i2c@7 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <7>; ++ /* Slot A (CN10) */ ++ ++ video_a_ext0: pca9535@26 { ++ compatible = "nxp,pca9535"; ++ reg = <0x26>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_a_des_cfg1 { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A cfg1"; ++ }; ++ video_a_des_cfg0 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A cfg0"; ++ }; ++ video_a_pwr_shdn { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR_SHDN"; ++ }; ++ video_a_cam_pwr0 { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR0"; ++ }; ++ video_a_cam_pwr1 { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR1"; ++ }; ++ video_a_cam_pwr2 { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR2"; ++ }; ++ video_a_cam_pwr3 { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR3"; ++ }; ++ video_a_des_shdn { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A DES_SHDN"; ++ }; ++ video_a_des_led { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A led"; ++ }; ++ }; ++ ++ video_a_ext1: max7325@5c { ++ compatible = "maxim,max7325"; ++ reg = <0x5c>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_a_des_cfg2 { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A cfg2"; ++ }; ++ video_a_des_cfg1 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A cfg1"; ++ }; ++ video_a_des_cfg0 { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A cfg0"; ++ }; ++ video_a_pwr_shdn { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR_SHDN"; ++ }; ++ video_a_cam_pwr0 { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR0"; ++ }; ++ video_a_cam_pwr1 { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR1"; ++ }; ++ video_a_cam_pwr3 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR3"; ++ }; ++ }; ++ }; ++ }; ++}; ++ ++&pcie_bus_clk { ++ clock-frequency = <100000000>; ++ status = "okay"; ++}; ++ ++&pciec0 { ++ status = "okay"; ++}; ++ ++&pciec1 { ++ status = "okay"; ++}; ++ ++&vin0 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin0ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ }; ++ port@1 { ++ csi0ep0: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin0_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ vin0_ti964_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep0>; ++ }; ++ vin0_ti954_des0ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep0>; ++ }; ++ }; ++ }; ++}; ++ ++&vin1 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin1ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <1>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ }; ++ port@1 { ++ csi0ep1: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin1_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ vin1_ti964_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep1>; ++ }; ++ vin1_ti954_des0ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep1>; ++ }; ++ }; ++ }; ++}; ++ ++&vin2 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin2ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <2>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ }; ++ port@1 { ++ csi0ep2: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin2_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ vin2_ti964_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep2>; ++ }; ++ }; ++ }; ++}; ++ ++&vin3 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin3ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <3>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ csi0ep3: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin3_max9286_des0ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ vin3_ti964_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep3>; ++ }; ++ }; ++ }; ++}; ++ ++&vin4 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin4ep0: endpoint { ++ csi,select = "csi41"; ++ virtual,channel = <0>; ++ remote-endpoint = <&ov106xx_in4>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep0: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin4_max9286_des1ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep0>; ++ }; ++ vin4_ti964_des1ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep0>; ++ }; ++ vin4_ti954_des1ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep0>; ++ }; ++ }; ++ }; ++}; ++ ++&vin5 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin5ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <1>; ++ remote-endpoint = <&ov106xx_in5>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep1: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin5_max9286_des1ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep1>; ++ }; ++ vin5_ti964_des1ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep1>; ++ }; ++ vin5_ti954_des1ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep1>; ++ }; ++ }; ++ }; ++}; ++ ++&vin6 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin6ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <2>; ++ remote-endpoint = <&ov106xx_in6>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep2: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin6_max9286_des1ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep2>; ++ }; ++ vin6_ti964_des1ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep2>; ++ }; ++ }; ++ }; ++}; ++ ++&vin7 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin7ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <3>; ++ remote-endpoint = <&ov106xx_in7>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep3: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin7_max9286_des1ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep3>; ++ }; ++ vin7_ti964_des1ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep3>; ++ }; ++ }; ++ }; ++}; ++ ++&csi2_40 { ++ status = "okay"; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "ycbcr422"; ++ receive,vc = <0>; ++ }; ++ csi2_vc1 { ++ data,type = "ycbcr422"; ++ receive,vc = <1>; ++ }; ++ csi2_vc2 { ++ data,type = "ycbcr422"; ++ receive,vc = <2>; ++ }; ++ csi2_vc3 { ++ data,type = "ycbcr422"; ++ receive,vc = <3>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_40_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ csi-rate = <300>; ++ }; ++ }; ++}; ++ ++&csi2_41 { ++ status = "okay"; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "ycbcr422"; ++ receive,vc = <0>; ++ }; ++ csi2_vc1 { ++ data,type = "ycbcr422"; ++ receive,vc = <1>; ++ }; ++ csi2_vc2 { ++ data,type = "ycbcr422"; ++ receive,vc = <2>; ++ }; ++ csi2_vc3 { ++ data,type = "ycbcr422"; ++ receive,vc = <3>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_41_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ csi-rate = <300>; ++ }; ++ }; ++}; ++ ++&rcar_sound { ++ pinctrl-0 = <&sound_clk_pins>; ++ ++ /* Multi DAI */ ++ #sound-dai-cells = <1>; ++ ++ rcar_sound,dai { ++ dai0 { ++ playback = <&ssi7>; ++ capture = <&ssi8>; ++ }; ++ ++ dai1 { ++ playback = <&ssi0 &src0 &dvc0>; ++ capture = <&ssi1 &src1 &dvc1>; ++ }; ++ ++ dai2 { ++ capture = <&ssi6>; ++ }; ++ }; ++}; ++ ++&sdhi3 { ++ pinctrl-0 = <&sdhi3_pins_3v3>; ++ pinctrl-names = "default"; ++ ++ vmmc-supply = <&wlan_en>; ++ vqmmc-supply = <&vccq_sdhi3>; ++ keep-power-in-suspend; ++ enable-sdio-wakeup; ++ bus-width = <4>; ++ no-1-8-v; ++ non-removable; ++ cap-power-off-card; ++ max-frequency = <26000000>; ++ status = "okay"; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ wlcore: wlcore@2 { ++ compatible = "ti,wl1837"; ++ reg = <2>; ++ interrupt-parent = <&gpio1>; ++ interrupts = <25 IRQ_TYPE_EDGE_RISING>; ++ }; ++}; ++ ++&usb2_phy0 { ++ pinctrl-0 = <&usb0_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++}; ++ ++&ehci0 { ++ status = "okay"; ++}; ++ ++&ohci0 { ++ status = "okay"; ++}; ++ ++&xhci0 { ++ status = "okay"; ++}; ++ ++&msiof1 { ++ status = "disabled"; ++}; ++ ++&can0 { ++ pinctrl-0 = <&can0_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ ++ renesas,can-clock-select = <0x0>; ++}; ++ ++&can1 { ++ pinctrl-0 = <&can1_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ ++ renesas,can-clock-select = <0x0>; ++}; ++ ++&canfd { ++ pinctrl-0 = <&canfd0_pins &canfd1_pins>; ++ pinctrl-names = "default"; ++ status = "disabled"; ++ ++ channel0 { ++ status = "okay"; ++ }; ++ ++ channel1 { ++ status = "okay"; ++ }; ++}; ++ ++/* uncomment to enable CN48 on VIN4 */ ++//#include "ulcb-kf-rpi.dtsi" ++/* uncomment to enable CN47: SD on SDHI3 */ ++//#include "ulcb-kf-sd3.dtsi" +diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts +new file mode 100644 +index 0000000..a26689c +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts +@@ -0,0 +1,1787 @@ ++/* ++ * Device Tree Source for the H3ULCB Videobox board ++ * ++ * Copyright (C) 2017 Renesas Electronics Corp. ++ * Copyright (C) 2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++#include "r8a7795-h3ulcb.dts" ++ ++/ { ++ model = "Renesas H3ULCB Videobox board based on r8a7795"; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ led5 { ++ gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; ++ }; ++ led6 { ++ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; ++ }; ++ /* D13 - status 0 */ ++ led_ext00 { ++ gpios = <&gpio_ext_led 0 GPIO_ACTIVE_LOW>; ++ linux,default-trigger = "heartbeat"; ++ }; ++ /* D14 - status 1 */ ++ led_ext01 { ++ gpios = <&gpio_ext_led 1 GPIO_ACTIVE_LOW>; ++ linux,default-trigger = "mmc1"; ++ }; ++ /* D16 - HDMI1 */ ++ led_ext02 { ++ gpios = <&gpio_ext_led 2 GPIO_ACTIVE_LOW>; ++ }; ++ /* D18 - HDMI0 */ ++ led_ext03 { ++ gpios = <&gpio_ext_led 3 GPIO_ACTIVE_LOW>; ++ }; ++ /* D20 - USB3.0 - 0.1 */ ++ led_ext04 { ++ gpios = <&gpio_ext_led 4 GPIO_ACTIVE_LOW>; ++ }; ++ /* D21 - USB3.0 - 0.2 */ ++ led_ext05 { ++ gpios = <&gpio_ext_led 5 GPIO_ACTIVE_LOW>; ++ }; ++ /* D24 - USB3.0 - 1.1 */ ++ led6_ext06 { ++ gpios = <&gpio_ext_led 6 GPIO_ACTIVE_LOW>; ++ }; ++ /* D25 - USB3.0 - 1.2 */ ++ led_ext07 { ++ gpios = <&gpio_ext_led 7 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ snd_clk: snd_clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <24576000>; ++ clock-output-names = "scki"; ++ }; ++ ++ vccq_sdhi3: regulator@5 { ++ compatible = "regulator-fixed"; ++ ++ regulator-name = "SDHI3 VccQ"; ++ /* external voltage translator to 1.8V */ ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ }; ++ ++ fpdlink_switch: regulator@8 { ++ compatible = "regulator-fixed"; ++ regulator-name = "fpdlink_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio1 20 0>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ hub_reset: regulator@9 { ++ compatible = "regulator-fixed"; ++ regulator-name = "hub_reset"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio5 5 0>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ hub_power: regulator@10 { ++ compatible = "regulator-fixed"; ++ regulator-name = "hub_power"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ gpio = <&gpio6 28 0>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ /delete-node/sound; ++ ++ rsnd_ak4613: sound@0 { ++ pinctrl-0 = <&sound_0_pins>; ++ pinctrl-names = "default"; ++ compatible = "simple-audio-card"; ++ ++ simple-audio-card,format = "left_j"; ++ simple-audio-card,name = "ak4613"; ++ ++ simple-audio-card,bitclock-master = <&sndcpu>; ++ simple-audio-card,frame-master = <&sndcpu>; ++ ++ sndcpu: simple-audio-card,cpu@1 { ++ sound-dai = <&rcar_sound>; ++ }; ++ ++ sndcodec: simple-audio-card,codec@1 { ++ sound-dai = <&ak4613>; ++ }; ++ }; ++ ++ lvds-encoder { ++ compatible = "thine,thc63lvdm83d"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ port@0 { ++ reg = <0>; ++ lvds_enc_in: endpoint { ++ remote-endpoint = <&du_out_lvds0>; ++ }; ++ }; ++ port@1 { ++ reg = <1>; ++ lvds_enc_out: endpoint { ++ remote-endpoint = <&lvds_in>; ++ }; ++ }; ++ }; ++ }; ++ ++ lvds { ++ compatible = "lvds-connector"; ++ ++ width-mm = <210>; ++ height-mm = <158>; ++ ++ panel-timing { ++ /* 1280x800 @60Hz */ ++ clock-frequency = <65000000>; ++ hactive = <1280>; ++ vactive = <800>; ++ hsync-len = <40>; ++ hfront-porch = <80>; ++ hback-porch = <40>; ++ vfront-porch = <14>; ++ vback-porch = <14>; ++ vsync-len = <4>; ++ }; ++ ++ port { ++ lvds_in: endpoint { ++ remote-endpoint = <&lvds_enc_out>; ++ }; ++ }; ++ }; ++ ++ hdmi1-out { ++ compatible = "hdmi-connector"; ++ type = "a"; ++ ++ port { ++ hdmi1_con: endpoint { ++ remote-endpoint = <&rcar_dw_hdmi1_out>; ++ }; ++ }; ++ }; ++ ++ excan_ref_clk: excan-ref-clock { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <16000000>; ++ }; ++ ++ radio: si468x@0 { ++ compatible = "si,si468x-pcm"; ++ status = "okay"; ++ ++ #sound-dai-cells = <0>; ++ }; ++ ++ spi_gpio_sw { ++ compatible = "spi-gpio"; ++ #address-cells = <0x1>; ++ #size-cells = <0x0>; ++ gpio-sck = <&gpio0 8 GPIO_ACTIVE_HIGH>; ++ gpio-miso = <&gpio0 10 GPIO_ACTIVE_HIGH>; ++ gpio-mosi = <&gpio0 11 GPIO_ACTIVE_HIGH>; ++ cs-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; ++ num-chipselects = <1>; ++ ++ spidev: spidev@0 { ++ compatible = "spidev", "spi-gpio"; ++ reg = <0>; ++ spi-max-frequency = <25000000>; ++ spi-cpha; ++ spi-cpol; ++ }; ++ }; ++ ++ spi_gpio_can { ++ compatible = "spi-gpio"; ++ #address-cells = <0x1>; ++ #size-cells = <0x0>; ++ gpio-sck = <&gpio1 2 GPIO_ACTIVE_HIGH>; ++ gpio-miso = <&gpio1 3 GPIO_ACTIVE_HIGH>; ++ gpio-mosi = <&gpio1 1 GPIO_ACTIVE_HIGH>; ++ cs-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH ++ &gpio1 4 GPIO_ACTIVE_HIGH>; ++ num-chipselects = <2>; ++ ++ spican0: spidev@0 { ++ compatible = "microchip,mcp2515"; ++ reg = <0>; ++ clocks = <&excan_ref_clk>; ++ interrupt-parent = <&gpio0>; ++ interrupts = <15 GPIO_ACTIVE_LOW>; ++ spi-max-frequency = <10000000>; ++ }; ++ spican1: spidev@1 { ++ compatible = "microchip,mcp2515"; ++ reg = <1>; ++ clocks = <&excan_ref_clk>; ++ interrupt-parent = <&gpio1>; ++ interrupts = <5 GPIO_ACTIVE_LOW>; ++ spi-max-frequency = <10000000>; ++ }; ++ }; ++}; ++ ++&du { ++ ports { ++ port@1 { ++ endpoint { ++ remote-endpoint = <&rcar_dw_hdmi0_in>; ++ }; ++ }; ++ port@2 { ++ endpoint { ++ remote-endpoint = <&rcar_dw_hdmi1_in>; ++ }; ++ }; ++ port@3 { ++ endpoint { ++ remote-endpoint = <&lvds_enc_in>; ++ }; ++ }; ++ }; ++}; ++ ++&hdmi1 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ port@0 { ++ reg = <0>; ++ rcar_dw_hdmi1_in: endpoint { ++ remote-endpoint = <&du_out_hdmi1>; ++ }; ++ }; ++ port@1 { ++ reg = <1>; ++ rcar_dw_hdmi1_out: endpoint { ++ remote-endpoint = <&hdmi1_con>; ++ }; ++ }; ++ }; ++}; ++ ++&pfc { ++ hscif4_pins: hscif4 { ++ groups = "hscif4_data_a", "hscif4_ctrl"; ++ function = "hscif4"; ++ }; ++ ++ sdhi3_pins_3v3: sd3_3v3 { ++ groups = "sdhi3_data4", "sdhi3_ctrl"; ++ function = "sdhi3"; ++ power-source = <3300>; ++ }; ++ ++ /delete-node/sound; ++ ++ sound_0_pins: sound1 { ++ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; ++ function = "ssi"; ++ }; ++ ++ usb0_pins: usb0 { ++ groups = "usb0"; ++ function = "usb0"; ++ }; ++ ++ can0_pins: can0 { ++ groups = "can0_data_a"; ++ function = "can0"; ++ }; ++ ++ can1_pins: can1 { ++ groups = "can1_data"; ++ function = "can1"; ++ }; ++ ++ canfd0_pins: canfd0 { ++ groups = "canfd0_data_a"; ++ function = "canfd0"; ++ }; ++ ++ canfd1_pins: canfd1 { ++ groups = "canfd1_data"; ++ function = "canfd1"; ++ }; ++}; ++ ++&gpio0 { ++ video_a_irq { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A irq"; ++ }; ++ ++ video_b_irq { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B irq"; ++ }; ++ ++ video_c_irq { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-C irq"; ++ }; ++}; ++ ++&gpio1 { ++ gpioext_4_22_irq { ++ gpio-hog; ++ gpios = <25 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "0x22@i2c4 irq"; ++ }; ++ pcie_disable { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "mPCIe W_DISABLE"; ++ }; ++ m2_sleep { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "M.2 SLEEP#"; ++ }; ++ m2_pres { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "M.2 Present"; ++ }; ++ m2_pcie_det { ++ gpio-hog; ++ gpios = <18 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "M.2 PCIe detected"; ++ }; ++ m2_usb_det { ++ gpio-hog; ++ gpios = <19 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "M.2 USB30 detected"; ++ }; ++ m2_usb_det { ++ gpio-hog; ++ gpios = <27 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "M.2 SSD detected"; ++ }; ++ eth_phy_reset { ++ gpio-hog; ++ gpios = <16 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "BR phy reset"; ++ }; ++ eth_sw_reset { ++ gpio-hog; ++ gpios = <17 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "BR switch reset"; ++ }; ++}; ++ ++&gpio2 { ++ m2_wake { ++ gpio-hog; ++ gpios = <1 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "M.2 WAKE#"; ++ }; ++ m2_pcie_en { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "M.2 PCIe enable"; ++ }; ++}; ++ ++&gpio3 { ++ m2_power_off { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "M.2 FULL_CARD_POWER_OFF#"; ++ }; ++}; ++ ++&gpio6 { ++ pcie_wake { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "mPCIe WAKE#"; ++ }; ++ pcie_clkreq { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "mPCIe CLKREQ#"; ++ }; ++ m2_rst { ++ gpio-hog; ++ gpios = <21 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "M.2 RESET#"; ++ }; ++}; ++ ++&hscif4 { ++ pinctrl-0 = <&hscif4_pins>; ++ pinctrl-names = "default"; ++ ctsrts; ++ ++ status = "okay"; ++}; ++ ++&i2c2 { ++ clock-frequency = <400000>; ++ ++ i2cswitch2: pca9548@74 { ++ compatible = "nxp,pca9548"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x74>; ++ reset-gpios = <&gpio6 5 GPIO_ACTIVE_LOW>; ++ ++ i2c@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ /* USB3.0 HUB node(s) */ ++ }; ++ ++ i2c@6 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <6>; ++ /* PCIe node(s) */ ++ }; ++ ++ i2c@7 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <7>; ++ /* Slot A (CN10) */ ++ ++ ov106xx@0 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x60>; ++ ++ port@0 { ++ ov106xx_in0: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin0ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ ov106xx_ti964_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep0>; ++ }; ++ ov106xx_ti954_des0ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep0>; ++ }; ++ }; ++ }; ++ ++ ov106xx@1 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x61>; ++ ++ port@0 { ++ ov106xx_in1: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin1ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ ov106xx_ti964_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep1>; ++ }; ++ ov106xx_ti954_des0ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep1>; ++ }; ++ }; ++ }; ++ ++ ov106xx@2 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x62>; ++ ++ port@0 { ++ ov106xx_in2: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin2ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ ov106xx_ti964_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep2>; ++ }; ++ }; ++ }; ++ ++ ov106xx@3 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x63>; ++ ++ port@0 { ++ ov106xx_in3: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin3ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ ov106xx_ti964_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep3>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB964 @ 0x3a */ ++ ti964-ti9x3@0 { ++ compatible = "ti,ti964-ti9x3"; ++ reg = <0x3a>; ++ ti,sensor_delay = <350>; ++ ti,links = <4>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "stp"; ++ ++ port@0 { ++ ti964_des0ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ ti964_des0ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ ti964_des0ep2: endpoint@2 { ++ ti9x3-addr = <0x0e>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ ti964_des0ep3: endpoint@3 { ++ ti9x3-addr = <0x0f>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ ti964_csi0ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB954 @ 0x38 */ ++ ti954-ti9x3@0 { ++ compatible = "ti,ti954-ti9x3"; ++ reg = <0x38>; ++ /* gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; */ ++ ti,sensor_delay = <350>; ++ ti,links = <2>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "stp"; ++ ++ port@0 { ++ ti954_des0ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ ti954_des0ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ }; ++ port@1 { ++ ti954_csi0ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ ++ /* MAX9286 @ 0x2c */ ++ max9286-max9271@0 { ++ compatible = "maxim,max9286-max9271"; ++ reg = <0x2c>; ++ maxim,sensor_delay = <350>; ++ maxim,links = <4>; ++ maxim,lanes = <4>; ++ maxim,resetb-gpio = <1>; ++ maxim,fsync-mode = "automatic"; ++ maxim,timeout = <100>; ++ ++ port@0 { ++ max9286_des0ep0: endpoint@0 { ++ max9271-addr = <0x50>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ max9286_des0ep1: endpoint@1 { ++ max9271-addr = <0x51>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ max9286_des0ep2: endpoint@2 { ++ max9271-addr = <0x52>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ max9286_des0ep3: endpoint@3 { ++ max9271-addr = <0x53>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ max9286_csi0ep0: endpoint { ++ csi-rate = <700>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ }; ++ ++ i2c@2 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <2>; ++ /* Slot B (CN11) */ ++ ++ ov106xx@4 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x64>; ++ ++ port@0 { ++ ov106xx_in4: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin4ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep0>; ++ }; ++ ov106xx_ti964_des1ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep0>; ++ }; ++ ov106xx_ti954_des1ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep0>; ++ }; ++ }; ++ }; ++ ++ ov106xx@5 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x65>; ++ ++ port@0 { ++ ov106xx_in5: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin5ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep1>; ++ }; ++ ov106xx_ti964_des1ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep1>; ++ }; ++ ov106xx_ti954_des1ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep1>; ++ }; ++ }; ++ }; ++ ++ ov106xx@6 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x66>; ++ ++ port@0 { ++ ov106xx_in6: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin6ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep2>; ++ }; ++ ov106xx_ti964_des1ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep2>; ++ }; ++ }; ++ }; ++ ++ ov106xx@7 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x67>; ++ ++ port@0 { ++ ov106xx_in7: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin7ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep3>; ++ }; ++ ov106xx_ti964_des1ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep3>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB964 @ 0x3a */ ++ ti964-ti9x3@1 { ++ compatible = "ti,ti964-ti9x3"; ++ reg = <0x3a>; ++ ti,sensor_delay = <350>; ++ ti,links = <4>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "stp"; ++ ++ port@0 { ++ ti964_des1ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in4>; ++ }; ++ ti964_des1ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in5>; ++ }; ++ ti964_des1ep2: endpoint@2 { ++ ti9x3-addr = <0x0e>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in6>; ++ }; ++ ti964_des1ep3: endpoint@3 { ++ ti9x3-addr = <0x0f>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in7>; ++ }; ++ }; ++ port@1 { ++ ti964_csi2ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB954 @ 0x38 */ ++ ti954-ti9x3@1 { ++ compatible = "ti,ti954-ti9x3"; ++ reg = <0x38>; ++ /* gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>; */ ++ ti,sensor_delay = <350>; ++ ti,links = <2>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "stp"; ++ ++ port@0 { ++ ti954_des1ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in4>; ++ }; ++ ti954_des1ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in5>; ++ }; ++ }; ++ port@1 { ++ ti954_csi2ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ }; ++ ++ /* MAX9286 @ 0x2c */ ++ max9286-max9271@1 { ++ compatible = "maxim,max9286-max9271"; ++ reg = <0x2c>; ++ maxim,sensor_delay = <350>; ++ maxim,links = <4>; ++ maxim,lanes = <4>; ++ maxim,resetb-gpio = <1>; ++ maxim,fsync-mode = "automatic"; ++ maxim,timeout = <100>; ++ ++ port@0 { ++ max9286_des1ep0: endpoint@0 { ++ max9271-addr = <0x50>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in4>; ++ }; ++ max9286_des1ep1: endpoint@1 { ++ max9271-addr = <0x51>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in5>; ++ }; ++ max9286_des1ep2: endpoint@2 { ++ max9271-addr = <0x52>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in6>; ++ }; ++ max9286_des1ep3: endpoint@3 { ++ max9271-addr = <0x53>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in7>; ++ }; ++ }; ++ port@1 { ++ max9286_csi2ep0: endpoint { ++ csi-rate = <700>; ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ }; ++ }; ++ ++ i2c@3 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <3>; ++ /* Slot C (CN12) */ ++ }; ++ ++ i2c@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <1>; ++ /* Slot A (CN10) */ ++ ++ video_a_ext0: pca9535@26 { ++ compatible = "nxp,pca9535"; ++ reg = <0x26>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_a_des_cfg1 { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg1"; ++ }; ++ video_a_des_cfg0 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg0"; ++ }; ++ video_a_pwr_shdn { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR_SHDN"; ++ }; ++ video_a_cam_pwr0 { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR0"; ++ }; ++ video_a_cam_pwr1 { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR1"; ++ }; ++ video_a_cam_pwr2 { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR2"; ++ }; ++ video_a_cam_pwr3 { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR3"; ++ }; ++ video_a_des_shdn { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A DES_SHDN"; ++ }; ++ video_a_des_led { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A led"; ++ }; ++ }; ++ ++ video_a_ext1: max7325@5c { ++ compatible = "maxim,max7325"; ++ reg = <0x5c>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_a_des_cfg2 { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg2"; ++ }; ++ video_a_des_cfg1 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg1"; ++ }; ++ video_a_des_cfg0 { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg0"; ++ }; ++ video_a_pwr_shdn { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR_SHDN"; ++ }; ++ video_a_cam_pwr0 { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR0"; ++ }; ++ video_a_cam_pwr1 { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR1"; ++ }; ++ video_a_cam_pwr2 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR2"; ++ }; ++ video_a_cam_pwr3 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR3"; ++ }; ++ video_a_des_shdn { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A DES_SHDN"; ++ }; ++ video_a_led { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A LED"; ++ }; ++ }; ++ }; ++ ++ i2c@5 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <5>; ++ /* Slot B (CN11) */ ++ ++ video_b_ext0: pca9535@26 { ++ compatible = "nxp,pca9535"; ++ reg = <0x26>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_b_des_cfg1 { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B cfg1"; ++ }; ++ video_b_des_cfg0 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B cfg0"; ++ }; ++ video_b_pwr_shdn { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR_SHDN"; ++ }; ++ video_b_cam_pwr0 { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR0"; ++ }; ++ video_b_cam_pwr1 { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR1"; ++ }; ++ video_b_cam_pwr2 { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR2"; ++ }; ++ video_b_cam_pwr3 { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR3"; ++ }; ++ video_b_des_shdn { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B DES_SHDN"; ++ }; ++ video_b_des_led { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B led"; ++ }; ++ }; ++ ++ video_b_ext1: max7325@5c { ++ compatible = "maxim,max7325"; ++ reg = <0x5c>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_b_des_cfg2 { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B cfg2"; ++ }; ++ video_b_des_cfg1 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B cfg1"; ++ }; ++ video_b_des_cfg0 { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B cfg0"; ++ }; ++ video_b_pwr_shdn { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR_SHDN"; ++ }; ++ video_b_cam_pwr0 { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR0"; ++ }; ++ video_b_cam_pwr1 { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR1"; ++ }; ++ video_b_cam_pwr2 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR2"; ++ }; ++ video_b_cam_pwr3 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR3"; ++ }; ++ video_b_des_shdn { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B DES_SHDN"; ++ }; ++ video_b_led { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B LED"; ++ }; ++ }; ++ }; ++ ++ i2c@4 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <4>; ++ /* Slot C (CN12) */ ++ }; ++ }; ++}; ++ ++&i2c4 { ++ i2cswitch4: pca9548@74 { ++ compatible = "nxp,pca9548"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x74>; ++ reset-gpios= <&gpio5 15 GPIO_ACTIVE_LOW>; ++ ++ i2c@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ /* FAN node - EMC2103 */ ++ fan_ctrl:ecm2103@2e { ++ compatible = "emc2103"; ++ reg = <0x2e>; ++ }; ++ }; ++ ++ i2c@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <1>; ++ /* Power nodes - 2 x TPS544x20 */ ++ }; ++ ++ i2c@2 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <2>; ++ /* CAN and power board nodes */ ++ ++ gpio_ext_pwr: pca9535@22 { ++ compatible = "nxp,pca9535"; ++ reg = <0x22>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio1>; ++ interrupts = <25 IRQ_TYPE_EDGE_FALLING>; ++ ++ /* enable input DCDC after wake-up signal released */ ++ pwr_hold { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "pwr_hold"; ++ }; ++ ++ /* CAN0 */ ++ can0_stby { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can0_stby"; ++ }; ++ can0_load { ++ gpio-hog; ++ gpios = <0 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can0_120R_load"; ++ }; ++ /* CAN1 */ ++ can1_stby { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can1_stby"; ++ }; ++ can1_load { ++ gpio-hog; ++ gpios = <1 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can1_120R_load"; ++ }; ++ /* CAN2 */ ++ can2_stby { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can2_stby"; ++ }; ++ can2_load { ++ gpio-hog; ++ gpios = <2 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can2_120R_load"; ++ }; ++ can2_rst { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "can2_rst"; ++ }; ++ /* CAN3 */ ++ can3_stby { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can3_stby"; ++ }; ++ can3_load { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can3_120R_load"; ++ }; ++ can3_rst { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "can3_rst"; ++ }; ++ }; ++ }; ++ ++ i2c@3 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <3>; ++ /* FPDLink output node - DS90UH947 */ ++ }; ++ ++ i2c@4 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <4>; ++ /* BCM switch node */ ++ }; ++ ++ i2c@5 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <5>; ++ /* LED board node(s) */ ++ ++ gpio_ext_led: pca9535@22 { ++ compatible = "nxp,pca9535"; ++ reg = <0x22>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ /* gpios 0..7 are used for indication LEDs, low-active */ ++ }; ++ }; ++ ++ i2c@6 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <6>; ++ /* M2 connector i2c node(s) */ ++ }; ++ ++ /* port 7 is not used */ ++ }; ++}; ++ ++&pcie_bus_clk { ++ clock-frequency = <100000000>; ++ status = "okay"; ++}; ++ ++&pciec0 { ++ status = "okay"; ++}; ++ ++&pciec1 { ++ status = "okay"; ++}; ++ ++&vin0 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin0ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ }; ++ port@1 { ++ csi0ep0: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin0_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ vin0_ti964_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep0>; ++ }; ++ vin0_ti954_des0ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep0>; ++ }; ++ }; ++ }; ++}; ++ ++&vin1 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin1ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <1>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ }; ++ port@1 { ++ csi0ep1: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin1_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ vin1_ti964_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep1>; ++ }; ++ vin1_ti954_des0ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep1>; ++ }; ++ }; ++ }; ++}; ++ ++&vin2 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin2ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <2>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ }; ++ port@1 { ++ csi0ep2: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin2_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ vin2_ti964_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep2>; ++ }; ++ }; ++ }; ++}; ++ ++&vin3 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin3ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <3>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ csi0ep3: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin3_max9286_des0ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ vin3_ti964_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep3>; ++ }; ++ }; ++ }; ++}; ++ ++&vin4 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin4ep0: endpoint { ++ csi,select = "csi41"; ++ virtual,channel = <0>; ++ remote-endpoint = <&ov106xx_in4>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep0: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin4_max9286_des1ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep0>; ++ }; ++ vin4_ti964_des1ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep0>; ++ }; ++ vin4_ti954_des1ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep0>; ++ }; ++ }; ++ }; ++}; ++ ++&vin5 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin5ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <1>; ++ remote-endpoint = <&ov106xx_in5>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep1: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin5_max9286_des1ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep1>; ++ }; ++ vin5_ti964_des1ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep1>; ++ }; ++ vin5_ti954_des1ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep1>; ++ }; ++ }; ++ }; ++}; ++ ++&vin6 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin6ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <2>; ++ remote-endpoint = <&ov106xx_in6>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep2: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin6_max9286_des1ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep2>; ++ }; ++ vin6_ti964_des1ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep2>; ++ }; ++ }; ++ }; ++}; ++ ++&vin7 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin7ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <3>; ++ remote-endpoint = <&ov106xx_in7>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep3: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin7_max9286_des1ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep3>; ++ }; ++ vin7_ti964_des1ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep3>; ++ }; ++ }; ++ }; ++}; ++ ++&csi2_40 { ++ status = "okay"; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "ycbcr422"; ++ receive,vc = <0>; ++ }; ++ csi2_vc1 { ++ data,type = "ycbcr422"; ++ receive,vc = <1>; ++ }; ++ csi2_vc2 { ++ data,type = "ycbcr422"; ++ receive,vc = <2>; ++ }; ++ csi2_vc3 { ++ data,type = "ycbcr422"; ++ receive,vc = <3>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_40_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ csi-rate = <300>; ++ }; ++ }; ++}; ++ ++&csi2_41 { ++ status = "okay"; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "ycbcr422"; ++ receive,vc = <0>; ++ }; ++ csi2_vc1 { ++ data,type = "ycbcr422"; ++ receive,vc = <1>; ++ }; ++ csi2_vc2 { ++ data,type = "ycbcr422"; ++ receive,vc = <2>; ++ }; ++ csi2_vc3 { ++ data,type = "ycbcr422"; ++ receive,vc = <3>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_41_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ csi-rate = <300>; ++ }; ++ }; ++}; ++ ++&rcar_sound { ++ pinctrl-0 = <&sound_clk_pins>; ++ ++ /* Multi DAI */ ++ #sound-dai-cells = <1>; ++}; ++ ++&sata { ++ status = "okay"; ++}; ++ ++&ssi1 { ++ /delete-property/shared-pin; ++}; ++ ++&avb { ++ /delete-property/phy-handle; ++ /delete-property/phy-gpios; ++ phy-mode = "rgmii"; ++ ++ /delete-node/ethernet-phy@0; ++ ++ fixed-link { ++ speed = <100>; ++ full-duplex; ++ }; ++}; ++ ++&msiof1 { ++ status = "disabled"; ++}; ++ ++&usb2_phy0 { ++ pinctrl-0 = <&usb0_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++}; ++ ++&xhci0 { ++ status = "okay"; ++}; ++ ++&hsusb0 { ++ status = "okay"; ++}; ++ ++&ehci0 { ++ status = "okay"; ++}; ++ ++&ohci0 { ++ status = "okay"; ++}; ++ ++&can0 { ++ pinctrl-0 = <&can0_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ ++ renesas,can-clock-select = <0x0>; ++}; ++ ++&can1 { ++ pinctrl-0 = <&can1_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ ++ renesas,can-clock-select = <0x0>; ++}; ++ ++&canfd { ++ pinctrl-0 = <&canfd0_pins &canfd1_pins>; ++ pinctrl-names = "default"; ++ status = "disabled"; ++ ++ renesas,can-clock-select = <0x0>; ++ ++ channel0 { ++ status = "okay"; ++ }; ++ ++ channel1 { ++ status = "okay"; ++ }; ++}; ++ ++/* uncomment to enable CN12 on VIN4-7 */ ++//#include "ulcb-vb-cn12.dtsi" +diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-view.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-view.dts +new file mode 100644 +index 0000000..2c24b85 +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-view.dts +@@ -0,0 +1,546 @@ ++/* ++ * Device Tree Source for the H3ULCB.View board ++ * ++ * Copyright (C) 2016-2017 Renesas Electronics Corp. ++ * Copyright (C) 2016-2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++#include "r8a7795-h3ulcb.dts" ++ ++/ { ++ model = "Renesas H3ULCB.View board based on r8a7795"; ++}; ++ ++&i2c4 { ++ ov106xx@0 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x60>; ++ ++ port@0 { ++ ov106xx_in0: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin0ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ }; ++ }; ++ ++ ov106xx@1 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x61>; ++ ++ port@0 { ++ ov106xx_in1: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin1ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ }; ++ }; ++ ++ ov106xx@2 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x62>; ++ ++ port@0 { ++ ov106xx_in2: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin2ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ }; ++ }; ++ ++ ov106xx@3 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x63>; ++ ++ port@0 { ++ ov106xx_in3: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin3ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_des0ep3: endpoint { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ }; ++ }; ++ ++ ov106xx@4 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x64>; ++ ++ port@0 { ++ ov106xx_in4: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin4ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep0>; ++ }; ++ }; ++ }; ++ ++ ov106xx@5 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x65>; ++ ++ port@0 { ++ ov106xx_in5: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin5ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep1>; ++ }; ++ }; ++ }; ++ ++ ov106xx@6 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x66>; ++ ++ port@0 { ++ ov106xx_in6: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin6ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep2>; ++ }; ++ }; ++ }; ++ ++ ov106xx@7 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x67>; ++ ++ port@0 { ++ ov106xx_in7: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin7ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_des1ep3: endpoint { ++ remote-endpoint = <&max9286_des1ep3>; ++ }; ++ }; ++ }; ++ ++ max9286-max9271@0 { ++ compatible = "maxim,max9286-max9271"; ++ reg = <0x4c>; ++ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; ++ maxim,sensor_delay = <0>; ++ maxim,links = <4>; ++ maxim,lanes = <4>; ++ maxim,resetb-gpio = <1>; ++ maxim,fsync-mode = "automatic"; ++ maxim,timeout = <100>; ++ maxim,i2c-quirk = <0x6c>; ++ ++ port@0 { ++ max9286_des0ep0: endpoint@0 { ++ max9271-addr = <0x50>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ max9286_des0ep1: endpoint@1 { ++ max9271-addr = <0x51>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ max9286_des0ep2: endpoint@2 { ++ max9271-addr = <0x52>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ max9286_des0ep3: endpoint@3 { ++ max9271-addr = <0x53>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ max9286_csi0ep0: endpoint { ++ csi-rate = <700>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ ++ max9286-max9271@1 { ++ compatible = "maxim,max9286-max9271"; ++ reg = <0x6c>; ++ gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; ++ maxim,sensor_delay = <0>; ++ maxim,links = <4>; ++ maxim,lanes = <4>; ++ maxim,resetb-gpio = <1>; ++ maxim,fsync-mode = "automatic"; ++ maxim,timeout = <100>; ++ ++ port@0 { ++ max9286_des1ep0: endpoint@0 { ++ max9271-addr = <0x54>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in4>; ++ }; ++ max9286_des1ep1: endpoint@1 { ++ max9271-addr = <0x55>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in5>; ++ }; ++ max9286_des1ep2: endpoint@2 { ++ max9271-addr = <0x56>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in6>; ++ }; ++ max9286_des1ep3: endpoint@3 { ++ max9271-addr = <0x57>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in7>; ++ }; ++ }; ++ port@1 { ++ max9286_csi2ep0: endpoint { ++ csi-rate = <700>; ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ }; ++}; ++ ++&pcie_bus_clk { ++ clock-frequency = <100000000>; ++ status = "okay"; ++}; ++ ++&pciec1 { ++ status = "okay"; ++}; ++ ++&vin0 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin0ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ }; ++ port@1 { ++ csi0ep0: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin0_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ }; ++ }; ++}; ++ ++&vin1 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin1ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <1>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ }; ++ port@1 { ++ csi0ep1: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin1_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ }; ++ }; ++}; ++ ++&vin2 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin2ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <2>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ }; ++ port@1 { ++ csi0ep2: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin2_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ }; ++ }; ++}; ++ ++&vin3 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin3ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <3>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ csi0ep3: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin3_max9286_des0ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ }; ++ }; ++}; ++ ++&vin4 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin4ep0: endpoint { ++ csi,select = "csi41"; ++ virtual,channel = <0>; ++ remote-endpoint = <&ov106xx_in4>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep0: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin4_max9286_des1ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep0>; ++ }; ++ }; ++ }; ++}; ++ ++&vin5 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin5ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <1>; ++ remote-endpoint = <&ov106xx_in5>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep1: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin5_max9286_des1ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep1>; ++ }; ++ }; ++ }; ++}; ++ ++&vin6 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin6ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <2>; ++ remote-endpoint = <&ov106xx_in6>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep2: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin6_max9286_des1ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep2>; ++ }; ++ }; ++ }; ++}; ++ ++&vin7 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin7ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <3>; ++ remote-endpoint = <&ov106xx_in7>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep3: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin7_max9286_des1ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep3>; ++ }; ++ }; ++ }; ++}; ++ ++&csi2_40 { ++ status = "okay"; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "ycbcr422"; ++ receive,vc = <0>; ++ }; ++ csi2_vc1 { ++ data,type = "ycbcr422"; ++ receive,vc = <1>; ++ }; ++ csi2_vc2 { ++ data,type = "ycbcr422"; ++ receive,vc = <2>; ++ }; ++ csi2_vc3 { ++ data,type = "ycbcr422"; ++ receive,vc = <3>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_40_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ csi-rate = <300>; ++ }; ++ }; ++}; ++ ++&csi2_41 { ++ status = "okay"; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "ycbcr422"; ++ receive,vc = <0>; ++ }; ++ csi2_vc1 { ++ data,type = "ycbcr422"; ++ receive,vc = <1>; ++ }; ++ csi2_vc2 { ++ data,type = "ycbcr422"; ++ receive,vc = <2>; ++ }; ++ csi2_vc3 { ++ data,type = "ycbcr422"; ++ receive,vc = <3>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_41_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ csi-rate = <300>; ++ }; ++ }; ++}; +diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x-view.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x-view.dts +new file mode 100644 +index 0000000..fb12a39f3 +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x-view.dts +@@ -0,0 +1,552 @@ ++/* ++ * Device Tree Source for the Salvator-X.View board ++ * ++ * Copyright (C) 2016-2017 Renesas Electronics Corp. ++ * Copyright (C) 2015-2017 Cogent Embedded, Inc ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++#include "r8a7795-salvator-x.dts" ++ ++/ { ++ model = "Renesas Salvator-X.View board based on r8a7795"; ++}; ++ ++&pfc { ++ can0_pins: can0 { ++ groups = "can0_data_a"; ++ function = "can0"; ++ }; ++ ++ can1_pins: can1 { ++ groups = "can1_data"; ++ function = "can1"; ++ }; ++}; ++ ++&i2c4 { ++ /delete-node/hdmi-in@34; ++ /delete-node/composite-in@70; ++ ++ ov106xx@0 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x60>; ++ ++ port@0 { ++ ov106xx_in0: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin0ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ }; ++ }; ++ ++ ov106xx@1 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x61>; ++ ++ port@0 { ++ ov106xx_in1: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin1ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ }; ++ }; ++ ++ ov106xx@2 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x62>; ++ ++ port@0 { ++ ov106xx_in2: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin2ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ }; ++ }; ++ ++ ov106xx@3 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x63>; ++ ++ port@0 { ++ ov106xx_in3: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin3ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_des0ep3: endpoint { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ }; ++ }; ++ ++ ov106xx@4 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x64>; ++ ++ port@0 { ++ ov106xx_in4: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin4ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep0>; ++ }; ++ }; ++ }; ++ ++ ov106xx@5 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x65>; ++ ++ port@0 { ++ ov106xx_in5: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin5ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep1>; ++ }; ++ }; ++ }; ++ ++ ov106xx@6 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x66>; ++ ++ port@0 { ++ ov106xx_in6: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin6ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep2>; ++ }; ++ }; ++ }; ++ ++ ov106xx@7 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x67>; ++ ++ port@0 { ++ ov106xx_in7: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin7ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_des1ep3: endpoint { ++ remote-endpoint = <&max9286_des1ep3>; ++ }; ++ }; ++ }; ++ ++ max9286-max9271@0 { ++ compatible = "maxim,max9286-max9271"; ++ reg = <0x4c>; ++ gpios = <&gpio6 30 GPIO_ACTIVE_LOW>; ++ maxim,sensor_delay = <0>; ++ maxim,links = <4>; ++ maxim,lanes = <4>; ++ maxim,resetb-gpio = <1>; ++ maxim,fsync-mode = "automatic"; ++ maxim,timeout = <100>; ++ maxim,i2c-quirk = <0x6c>; ++ ++ port@0 { ++ max9286_des0ep0: endpoint@0 { ++ max9271-addr = <0x50>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ max9286_des0ep1: endpoint@1 { ++ max9271-addr = <0x51>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ max9286_des0ep2: endpoint@2 { ++ max9271-addr = <0x52>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ max9286_des0ep3: endpoint@3 { ++ max9271-addr = <0x53>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ max9286_csi0ep0: endpoint { ++ csi-rate = <700>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ ++ max9286-max9271@1 { ++ compatible = "maxim,max9286-max9271"; ++ reg = <0x6c>; ++ maxim,sensor_delay = <0>; ++ maxim,links = <4>; ++ maxim,lanes = <4>; ++ maxim,resetb-gpio = <1>; ++ maxim,fsync-mode = "automatic"; ++ maxim,timeout = <100>; ++ ++ port@0 { ++ max9286_des1ep0: endpoint@0 { ++ max9271-addr = <0x54>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in4>; ++ }; ++ max9286_des1ep1: endpoint@1 { ++ max9271-addr = <0x55>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in5>; ++ }; ++ max9286_des1ep2: endpoint@2 { ++ max9271-addr = <0x56>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in6>; ++ }; ++ max9286_des1ep3: endpoint@3 { ++ max9271-addr = <0x57>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in7>; ++ }; ++ }; ++ port@1 { ++ max9286_csi2ep0: endpoint { ++ csi-rate = <700>; ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ }; ++}; ++ ++&vin0 { ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin0ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ }; ++ port@1 { ++ csi0ep0: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin0_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ }; ++ }; ++}; ++ ++&vin1 { ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin1ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <1>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ }; ++ port@1 { ++ csi0ep1: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin1_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ }; ++ }; ++}; ++ ++&vin2 { ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin2ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <2>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ }; ++ port@1 { ++ csi0ep2: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin2_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ }; ++ }; ++}; ++ ++&vin3 { ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin3ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <3>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ csi0ep3: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin3_max9286_des0ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ }; ++ }; ++}; ++ ++&vin4 { ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin4ep0: endpoint { ++ csi,select = "csi41"; ++ virtual,channel = <0>; ++ remote-endpoint = <&ov106xx_in4>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep0: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin4_max9286_des1ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep0>; ++ }; ++ }; ++ }; ++}; ++ ++&vin5 { ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin5ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <1>; ++ remote-endpoint = <&ov106xx_in5>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep1: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin5_max9286_des1ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep1>; ++ }; ++ }; ++ }; ++}; ++ ++&vin6 { ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin6ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <2>; ++ remote-endpoint = <&ov106xx_in6>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep2: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin6_max9286_des1ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep2>; ++ }; ++ }; ++ }; ++}; ++ ++&vin7 { ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin7ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <3>; ++ remote-endpoint = <&ov106xx_in7>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep3: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin7_max9286_des1ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep3>; ++ }; ++ }; ++ }; ++}; ++ ++&csi2_20 { ++ status = "disabled"; ++ /delete-node/ports; ++}; ++ ++&csi2_40 { ++ /delete-node/ports; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "ycbcr422"; ++ receive,vc = <0>; ++ }; ++ csi2_vc1 { ++ data,type = "ycbcr422"; ++ receive,vc = <1>; ++ }; ++ csi2_vc2 { ++ data,type = "ycbcr422"; ++ receive,vc = <2>; ++ }; ++ csi2_vc3 { ++ data,type = "ycbcr422"; ++ receive,vc = <3>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_40_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ csi-rate = <300>; ++ }; ++ }; ++}; ++ ++&csi2_41 { ++ status = "okay"; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "ycbcr422"; ++ receive,vc = <0>; ++ }; ++ csi2_vc1 { ++ data,type = "ycbcr422"; ++ receive,vc = <1>; ++ }; ++ csi2_vc2 { ++ data,type = "ycbcr422"; ++ receive,vc = <2>; ++ }; ++ csi2_vc3 { ++ data,type = "ycbcr422"; ++ receive,vc = <3>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_41_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ csi-rate = <300>; ++ }; ++ }; ++}; ++ ++&can0 { ++ pinctrl-0 = <&can0_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++}; ++ ++&can1 { ++ pinctrl-0 = <&can1_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++}; +diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts +new file mode 100644 +index 0000000..ff0ec0f +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts +@@ -0,0 +1,443 @@ ++/* ++ * Device Tree Source for the M3ULCB Kingfisher V1 board ++ * ++ * Copyright (C) 2017 Renesas Electronics Corp. ++ * Copyright (C) 2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++#include "r8a7796-m3ulcb-kf.dts" ++ ++/ { ++ model = "Renesas M3ULCB Kingfisher V1 board based on r8a7796"; ++ ++ aliases { ++ serial1 = &hscif0; ++ serial2 = &hscif1; ++ serial3 = &scif1; ++ }; ++ ++ wlan_en: regulator@4 { ++ compatible = "regulator-fixed"; ++ regulator-name = "wlan-en-regulator"; ++ ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_74 4 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ }; ++ ++ codec_en_reg: regulator@6 { ++ compatible = "regulator-fixed"; ++ regulator-name = "codec-en-regulator"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_74 15 0>; ++ ++ /* delay - CHECK */ ++ startup-delay-us = <70000>; ++ enable-active-high; ++ }; ++ ++ amp_en_reg: regulator@7 { ++ compatible = "regulator-fixed"; ++ regulator-name = "amp-en-regulator"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_74 0 0>; ++ ++ startup-delay-us = <0>; ++ enable-active-high; ++ }; ++ ++ /delete-node/regulator@8; ++ ++ sdio_switch: regulator@9 { ++ compatible = "regulator-fixed"; ++ regulator-name = "wifi_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_74 5 0>; ++ enable-active-low; ++ regulator-always-on; ++ }; ++ ++ /delete-node/regulator@10; ++ ++ radio_switch: regulator@11 { ++ compatible = "regulator-fixed"; ++ regulator-name = "radio_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_74 13 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ kim { ++ compatible = "kim"; ++ nshutdown_gpio = <343>; /* gpio_ext_74 pin 3 */ ++ /* serial1 */ ++ dev_name = "/dev/ttySC1"; ++ flow_cntrl = <1>; ++ /* int div 8 hscif@26.6666656MHz */ ++ baud_rate = <3333332>; ++ }; ++ ++ hdmi-out { ++ compatible = "hdmi-connector"; ++ type = "a"; ++ ++ port { ++ hdmi_con: endpoint { ++ remote-endpoint = <&adv7513_out>; ++ }; ++ }; ++ }; ++}; ++ ++&pfc { ++ /delete-node/hscif4; ++ ++ scif1_pins: scif1 { ++ groups = "scif1_data_b"; ++ function = "scif1"; ++ }; ++ ++ hscif0_pins: hscif0 { ++ groups = "hscif0_data", "hscif0_ctrl"; ++ function = "hscif0"; ++ }; ++ ++ hscif1_pins: hscif1 { ++ groups = "hscif1_data_a", "hscif1_ctrl_a"; ++ function = "hscif1"; ++ }; ++ ++ du_pins: du { ++ groups = "du_rgb888", "du_sync", "du_clk_out_0", "du_disp"; ++ function = "du"; ++ }; ++}; ++ ++&du { ++ pinctrl-0 = <&du_pins>; ++ pinctrl-names = "default"; ++ ++ ports { ++ port@0 { ++ endpoint { ++ remote-endpoint = <&adv7513_in>; ++ }; ++ }; ++ port@1 { ++ endpoint { ++ remote-endpoint = <&rcar_dw_hdmi0_in>; ++ }; ++ }; ++ }; ++}; ++ ++&gpio0 { ++ /delete-node/video_a_irq; ++ /delete-node/video_b_irq; ++ /delete-node/gpioext_2_20_irq; ++}; ++ ++&gpio1 { ++ /delete-node/gpioext_2_21_irq; ++ /delete-node/wifi_irq; ++}; ++ ++&gpio2 { ++ bl_pwm { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "BL PWM 100%"; ++ }; ++}; ++ ++&gpio5 { ++ /delete-node/touch_irq; ++ /delete-node/bt_strap; ++ ++ /* V1 has h/w bug with swapped RTS and CTS on BT interface */ ++ /* Ignore these pins */ ++ hscif0_cts { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "hscif0 CTS"; ++ }; ++ ++ hscif0_rts { ++ gpio-hog; ++ gpios = <16 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "hscif0 RTS"; ++ }; ++}; ++ ++&gpio7 { ++ /delete-node/gpioext_2_21_irq; ++}; ++ ++&scif1 { ++ pinctrl-0 = <&scif1_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++}; ++ ++&hscif0 { ++ pinctrl-0 = <&hscif0_pins>; ++ pinctrl-names = "default"; ++ ctsrts; ++ ++ status = "okay"; ++}; ++ ++&hscif1 { ++ pinctrl-0 = <&hscif1_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++}; ++ ++&hscif4 { ++ /delete-property/pinctrl-0; ++ /delete-property/pinctrl-names; ++ ++ status = "disabled"; ++}; ++ ++&i2c2 { ++ /delete-node/pca9535@20; ++ /delete-node/pca9535@21; ++ ++ gpio_ext_74: pca9539@74 { ++ compatible = "nxp,pca9539"; ++ reg = <0x74>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio6>; ++ interrupts = <8 IRQ_TYPE_EDGE_FALLING>; ++ ++ hub_pwen { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "HUB pwen"; ++ }; ++ hub_rst { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "HUB rst"; ++ }; ++ otg_offvbus { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "OTG off VBUSn"; ++ }; ++ otg_extlpn { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "OTG EXTLPn"; ++ }; ++ otg_stat1 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "OTG Stat1"; ++ }; ++ otg_stat2 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "OTG Stat2"; ++ }; ++ }; ++ ++ gpio_ext_75: pca9539@75 { ++ compatible = "nxp,pca9539"; ++ reg = <0x75>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio6>; ++ interrupts = <4 IRQ_TYPE_EDGE_FALLING>; ++ ++ gps_rst { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "GPS rst"; ++ }; ++ fpdl_shdn { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "FPDLink shdn"; ++ }; ++ }; ++}; ++ ++&i2cswitch2 { ++ reg = <0x71>; ++ reset-gpios= <&gpio5 3 GPIO_ACTIVE_LOW>; ++ ++ i2c@4 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <4>; ++ ++ hdmi@3d { ++ compatible = "adi,adv7511w"; ++ reg = <0x3d>; ++ interrupt-parent = <&gpio2>; ++ interrupts = <0 IRQ_TYPE_EDGE_BOTH>; ++ pd-gpios = <&gpio_ext_75 5 GPIO_ACTIVE_LOW>; ++ ++ adi,input-depth = <8>; ++ adi,input-colorspace = "rgb"; ++ adi,input-clock = "1x"; ++ adi,input-style = <1>; ++ adi,input-justification = "evenly"; ++ adi,clock-delay = <1200>; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ adv7513_in: endpoint { ++ remote-endpoint = <&du_out_rgb>; ++ }; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ adv7513_out: endpoint { ++ remote-endpoint = <&hdmi_con>; ++ }; ++ }; ++ }; ++ }; ++ }; ++}; ++ ++&i2c4 { ++ /delete-node/pca9535@21; ++ ++ gpio_ext_76: pca9539@76 { ++ compatible = "nxp,pca9539"; ++ reg = <0x76>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio7>; ++ interrupts = <3 IRQ_TYPE_EDGE_FALLING>; ++ ++ port_b_a0 { ++ gpio-hog; ++ gpios = <0 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B A0"; ++ }; ++ port_b_a1 { ++ gpio-hog; ++ gpios = <1 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B A1"; ++ }; ++ port_a_a0 { ++ gpio-hog; ++ gpios = <2 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A A0"; ++ }; ++ port_a_a1 { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A A1"; ++ }; ++ /* pin 12 - CAM_CLK */ ++ rpi_cam_io_1 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "RaspB_IO1"; ++ }; ++ /* pin 11 - CAM_GPIO - assume pwdn */ ++ rpi_cam_io_0 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "RaspB_IO0"; ++ }; ++ /* 0 - FPDLink output, 1 - LVDS output */ ++ lvds_vs_fpdl { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "LVDS switch"; ++ }; ++ }; ++ ++ gpio_ext_77: pca9539@77 { ++ compatible = "nxp,pca9539"; ++ reg = <0x77>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio5>; ++ interrupts = <9 IRQ_TYPE_EDGE_FALLING>; ++ ++ mpcie_wake { ++ gpio-hog; ++ gpios = <0 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "mPCIe WAKE#"; ++ }; ++ mpcie_wdisable { ++ gpio-hog; ++ gpios = <1 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "mPCIe W_DISABLE"; ++ }; ++ mpcie_clreq { ++ gpio-hog; ++ gpios = <2 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "mPCIe CLKREQ#"; ++ }; ++ mpcie_ovc { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "mPCIe OVC"; ++ }; ++ }; ++}; ++ ++&i2cswitch4 { ++ reg = <0x71>; ++ reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>; ++}; ++ ++&wlcore { ++ interrupts = <25 IRQ_TYPE_EDGE_FALLING>; ++}; +diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts +new file mode 100644 +index 0000000..39eab1f +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts +@@ -0,0 +1,1238 @@ ++/* ++ * Device Tree Source for the M3ULCB Kingfisher board on r8a7796 ++ * ++ * Copyright (C) 2017 Renesas Electronics Corp. ++ * Copyright (C) 2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++#include "r8a7796-m3ulcb.dts" ++ ++/ { ++ model = "Renesas M3ULCB Kingfisher board based on r8a7796"; ++ ++ aliases { ++ serial1 = &hscif4; ++ }; ++ ++ snd_clk: snd_clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <24576000>; ++ clock-output-names = "scki"; ++ }; ++ ++ wlan_en: regulator@4 { ++ compatible = "regulator-fixed"; ++ regulator-name = "wlan-en-regulator"; ++ ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_20 4 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ }; ++ ++ vcc_sdhi3: regulator@41 { ++ compatible = "regulator-fixed"; ++ ++ regulator-name = "SDHI3 Vcc"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ ++ vccq_sdhi3: regulator@5 { ++ compatible = "regulator-fixed"; ++ ++ regulator-name = "SDHI3 VccQ"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ }; ++ ++ codec_en_reg: regulator@6 { ++ compatible = "regulator-fixed"; ++ regulator-name = "codec-en-regulator"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_20 15 0>; ++ ++ /* delay - CHECK */ ++ startup-delay-us = <70000>; ++ enable-active-high; ++ }; ++ ++ amp_en_reg: regulator@7 { ++ compatible = "regulator-fixed"; ++ regulator-name = "amp-en-regulator"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_20 0 0>; ++ ++ startup-delay-us = <0>; ++ enable-active-high; ++ }; ++ ++ lvds_switch: regulator@8 { ++ compatible = "regulator-fixed"; ++ regulator-name = "lvds_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio1 24 0>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ sdio_switch: regulator@9 { ++ compatible = "regulator-fixed"; ++ regulator-name = "wifi_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_20 5 0>; ++ enable-active-low; ++ regulator-always-on; ++ }; ++ ++ sound_switch: regulator@10 { ++ compatible = "regulator-fixed"; ++ regulator-name = "pcm3168a_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_21 5 0>; ++ enable-active-low; ++ regulator-always-on; ++ }; ++ ++ radio_switch: regulator@11 { ++ compatible = "regulator-fixed"; ++ regulator-name = "radio_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_20 13 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ kim { ++ compatible = "kim"; ++ nshutdown_gpio = <343>; /* pca9535@i2c2.0x20 pin 3 */ ++ /* serial1 */ ++ dev_name = "/dev/ttySC1"; ++ flow_cntrl = <1>; ++ /* int div 8 hscif@26.6666656MHz */ ++ baud_rate = <3333332>; ++ }; ++ ++ btwilink { ++ compatible = "btwilink"; ++ }; ++ ++ sound_ext: sound@0 { ++ pinctrl-0 = <&sound_0_pins>; ++ pinctrl-names = "default"; ++ compatible = "simple-audio-card"; ++ ++ simple-audio-card,format = "left_j"; ++ simple-audio-card,name = "pcm3168a"; ++ ++ simple-audio-card,bitclock-master = <&sound_ext_master>; ++ simple-audio-card,frame-master = <&sound_ext_master>; ++ sound_ext_master: simple-audio-card,cpu@0 { ++ sound-dai = <&rcar_sound 0>; ++ dai-tdm-slot-num = <8>; ++ dai-tdm-slot-width = <32>; ++ }; ++ ++ simple-audio-card,codec@0 { ++ sound-dai = <&pcm3168a>; ++ dai-tdm-slot-num = <8>; ++ dai-tdm-slot-width = <32>; ++ system-clock-frequency = <24576000>; ++ }; ++ }; ++ ++ /delete-node/sound; ++ ++ rsnd_ak4613: sound@1 { ++ pinctrl-0 = <&sound_1_pins>; ++ pinctrl-names = "default"; ++ compatible = "simple-audio-card"; ++ ++ simple-audio-card,format = "left_j"; ++ simple-audio-card,name = "ak4613"; ++ ++ simple-audio-card,bitclock-master = <&sndcpu>; ++ simple-audio-card,frame-master = <&sndcpu>; ++ ++ sndcpu: simple-audio-card,cpu@1 { ++ sound-dai = <&rcar_sound 1>; ++ }; ++ ++ sndcodec: simple-audio-card,codec@1 { ++ sound-dai = <&ak4613>; ++ }; ++ }; ++ ++ sound_radio: sound@2 { ++ pinctrl-0 = <&sound_2_pins>; ++ pinctrl-names = "default"; ++ compatible = "simple-audio-card"; ++ ++ simple-audio-card,format = "i2s"; ++ simple-audio-card,name = "radio"; ++ ++ simple-audio-card,bitclock-master = <&sound_radio_master>; ++ simple-audio-card,frame-master = <&sound_radio_master>; ++ simple-audio-card,cpu@2 { ++ sound-dai = <&rcar_sound 2>; ++ }; ++ ++ sound_radio_master: simple-audio-card,codec@2 { ++ sound-dai = <&radio>; ++ system-clock-frequency = <12288000>; ++ }; ++ }; ++ ++ lvds-encoder { ++ compatible = "thine,thc63lvdm83d"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ port@0 { ++ reg = <0>; ++ lvds_enc_in: endpoint { ++ remote-endpoint = <&du_out_lvds0>; ++ }; ++ }; ++ port@1 { ++ reg = <1>; ++ lvds_enc_out: endpoint { ++ remote-endpoint = <&lvds_in>; ++ }; ++ }; ++ }; ++ }; ++ ++ lvds { ++ compatible = "lvds-connector"; ++ ++ width-mm = <210>; ++ height-mm = <158>; ++ ++ panel-timing { ++ /* 1280x800 @60Hz */ ++ clock-frequency = <65000000>; ++ hactive = <1280>; ++ vactive = <800>; ++ hsync-len = <40>; ++ hfront-porch = <80>; ++ hback-porch = <40>; ++ vfront-porch = <14>; ++ vback-porch = <14>; ++ vsync-len = <4>; ++ }; ++ ++ port { ++ lvds_in: endpoint { ++ remote-endpoint = <&lvds_enc_out>; ++ }; ++ }; ++ }; ++ ++ radio: si468x@0 { ++ compatible = "si,si468x-pcm"; ++ status = "okay"; ++ ++ #sound-dai-cells = <0>; ++ }; ++}; ++ ++&pfc { ++ hscif4_pins: hscif4 { ++ groups = "hscif4_data_a", "hscif4_ctrl"; ++ function = "hscif4"; ++ }; ++ ++ sdhi3_pins_3v3: sd3_3v3 { ++ groups = "sdhi3_data4", "sdhi3_ctrl"; ++ function = "sdhi3"; ++ power-source = <3300>; ++ }; ++ ++ sound_0_pins: sound0 { ++ groups = "ssi78_ctrl", "ssi7_data", "ssi8_data"; ++ function = "ssi"; ++ }; ++ ++ sound_1_pins: sound1 { ++ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; ++ function = "ssi"; ++ }; ++ ++ sound_2_pins: sound2 { ++ groups = "ssi6_ctrl", "ssi6_data"; ++ function = "ssi"; ++ }; ++ ++ usb0_pins: usb0 { ++ groups = "usb0"; ++ function = "usb0"; ++ }; ++ ++ can0_pins: can0 { ++ groups = "can0_data_a"; ++ function = "can0"; ++ }; ++ ++ can1_pins: can1 { ++ groups = "can1_data"; ++ function = "can1"; ++ }; ++ ++ canfd0_pins: canfd0 { ++ groups = "canfd0_data_a"; ++ function = "canfd0"; ++ }; ++ ++ canfd1_pins: canfd1 { ++ groups = "canfd1_data"; ++ function = "canfd1"; ++ }; ++}; ++ ++&gpio0 { ++ video_a_irq { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A irq"; ++ }; ++ ++ video_b_irq { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B irq"; ++ }; ++ ++ gpioext_2_20_irq { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "0x20@i2c2 irq"; ++ }; ++}; ++ ++&gpio1 { ++ gpioext_2_21_irq { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "0x21@i2c2 irq"; ++ }; ++ ++ wifi_irq { ++ gpio-hog; ++ gpios = <25 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "wifi irq"; ++ }; ++}; ++ ++&gpio5 { ++ touch_irq { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "touch irq"; ++ }; ++ ++ /* From TI forum */ ++ /* BT_AUD_OUT should be pulled low when WL_EN is activated. */ ++ /* in case it isn't, wilink8 ends up in one of the test modes that introduces various issues */ ++ bt_strap { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "BT strap pin"; ++ }; ++}; ++ ++&gpio7 { ++ gpioext_2_21_irq { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "0x21@i2c4 irq"; ++ }; ++}; ++ ++&hscif4 { ++ pinctrl-0 = <&hscif4_pins>; ++ pinctrl-names = "default"; ++ ctsrts; ++ ++ status = "okay"; ++}; ++ ++&i2c2 { ++ clock-frequency = <400000>; ++ ++ gpio_ext_20: pca9535@20 { ++ compatible = "nxp,pca9535"; ++ reg = <0x20>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio0>; ++ interrupts = <15 IRQ_TYPE_EDGE_FALLING>; ++ }; ++ ++ gpio_ext_21: pca9535@21 { ++ compatible = "nxp,pca9535"; ++ reg = <0x21>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio1>; ++ interrupts = <15 IRQ_TYPE_EDGE_FALLING>; ++ }; ++ ++ i2cswitch2: pca9548@74 { ++ compatible = "nxp,pca9548"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x74>; ++ reset-gpios = <&gpio6 5 GPIO_ACTIVE_LOW>; ++ ++ i2c@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ /* BCM node(s) */ ++ }; ++ ++ i2c@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <1>; ++ /* USB3.0 HUB node(s) */ ++ }; ++ ++ i2c@2 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <2>; ++ /* Power amp node(s) */ ++ }; ++ ++ i2c@3 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <3>; ++ /* Radio node(s) */ ++ }; ++ ++ i2c@4 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <4>; ++ /* A2B node(s) */ ++ }; ++ ++ i2c@5 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <5>; ++ /* PCIe node(s) */ ++ }; ++ ++ i2c@6 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <6>; ++ /* LVDS display node(s) */ ++ ++ polytouch: edt-ft5x06@38 { ++ compatible = "edt,edt-ft5x06"; ++ reg = <0x38>; ++ interrupt-parent = <&gpio5>; ++ interrupts = <6 IRQ_TYPE_EDGE_FALLING>; ++ }; ++ }; ++ ++ i2c@7 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <7>; ++ /* Audio, GPS and Gyro node(s) */ ++ ++ pcm3168a: audio-codec@44 { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm3168a"; ++ reg = <0x44>; ++ clocks = <&snd_clk>; ++ clock-names = "scki"; ++ tdm; ++ VDD1-supply = <&codec_en_reg>; ++ VDD2-supply = <&codec_en_reg>; ++ VCCAD1-supply = <&codec_en_reg>; ++ VCCAD2-supply = <&codec_en_reg>; ++ VCCDA1-supply = <&_en_reg>; ++ VCCDA2-supply = <&_en_reg>; ++ }; ++ ++ lsm9ds0_acc_mag@1d { ++ compatible = "st,lsm9ds0_acc_mag"; ++ reg = <0x1d>; ++ }; ++ ++ lsm9ds0_gyr@6b { ++ compatible = "st,lsm9ds0-gyro"; ++ reg = <0x6b>; ++ }; ++ ++ /* GPS@ 0x42 */ ++ }; ++ }; ++}; ++ ++&i2c4 { ++ gpio_ext_22: pca9535@21 { ++ compatible = "nxp,pca9535"; ++ reg = <0x22>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio7>; ++ interrupts = <3 IRQ_TYPE_EDGE_FALLING>; ++ ++ /* pin 12 - CAM_CLK */ ++ rpi_cam_io_1 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "RaspB_IO1"; ++ }; ++ /* pin 11 - CAM_GPIO - assume pwdn */ ++ rpi_cam_io_0 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "RaspB_IO0"; ++ }; ++ }; ++ ++ i2cswitch4: pca9548@74 { ++ compatible = "nxp,pca9548"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x74>; ++ reset-gpios= <&gpio6 21 GPIO_ACTIVE_LOW>; ++ ++ i2c@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ /* SAM node(s) */ ++ }; ++ ++ i2c@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <1>; ++ /* Slot A (CN10) */ ++ ++ ov106xx@0 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x60>; ++ ++ port@0 { ++ ov106xx_in0: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin0ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ ov106xx_ti964_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep0>; ++ }; ++ ov106xx_ti954_des0ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep0>; ++ }; ++ }; ++ }; ++ ++ ov106xx@1 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x61>; ++ ++ port@0 { ++ ov106xx_in1: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin1ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ ov106xx_ti964_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep1>; ++ }; ++ ov106xx_ti954_des0ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep1>; ++ }; ++ }; ++ }; ++ ++ ov106xx@2 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x62>; ++ ++ port@0 { ++ ov106xx_in2: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin2ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ ov106xx_ti964_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep2>; ++ }; ++ }; ++ }; ++ ++ ov106xx@3 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x63>; ++ ++ port@0 { ++ ov106xx_in3: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin3ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ ov106xx_ti964_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep3>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB964 @ 0x3a */ ++ ti964-ti9x3@0 { ++ compatible = "ti,ti964-ti9x3"; ++ reg = <0x3a>; ++ gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; ++ ti,sensor_delay = <350>; ++ ti,links = <4>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "coax"; ++ ++ port@0 { ++ ti964_des0ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ ti964_des0ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ ti964_des0ep2: endpoint@2 { ++ ti9x3-addr = <0x0e>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ ti964_des0ep3: endpoint@3 { ++ ti9x3-addr = <0x0f>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ ti964_csi0ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB954 @ 0x38 */ ++ ti954-ti9x3@0 { ++ compatible = "ti,ti954-ti9x3"; ++ reg = <0x38>; ++ gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; ++ ti,sensor_delay = <350>; ++ ti,links = <2>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "coax"; ++ ++ port@0 { ++ ti954_des0ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ ti954_des0ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ }; ++ port@1 { ++ ti954_csi0ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ ++ /* MAX9286 @ 0x2a */ ++ max9286-max9271@0 { ++ compatible = "maxim,max9286-max9271"; ++ reg = <0x2a>; ++ maxim,sensor_delay = <350>; ++ maxim,links = <4>; ++ maxim,lanes = <4>; ++ maxim,resetb-gpio = <1>; ++ maxim,fsync-mode = "automatic"; ++ maxim,timeout = <100>; ++ ++ port@0 { ++ max9286_des0ep0: endpoint@0 { ++ max9271-addr = <0x50>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ max9286_des0ep1: endpoint@1 { ++ max9271-addr = <0x51>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ max9286_des0ep2: endpoint@2 { ++ max9271-addr = <0x52>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ max9286_des0ep3: endpoint@3 { ++ max9271-addr = <0x53>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ max9286_csi0ep0: endpoint { ++ csi-rate = <700>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ }; ++ ++ i2c@3 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <3>; ++ /* MOST node(s) */ ++ }; ++ ++ i2c@4 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <4>; ++ ++ rpi_camera: ov5647@36 { ++ compatible = "ovti,ov5647"; ++ reg = <0x36>; ++ ++ port@0 { ++ rpi_camera_in: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2>; ++ remote-endpoint = <&vin4ep0>; ++ }; ++ }; ++ }; ++ }; ++ ++ i2c@5 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <5>; ++ /* CMOS camera node(s) */ ++ }; ++ ++ i2c@7 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <7>; ++ /* Slot A (CN10) */ ++ ++ video_a_ext0: pca9535@26 { ++ compatible = "nxp,pca9535"; ++ reg = <0x26>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_a_des_cfg1 { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A cfg1"; ++ }; ++ video_a_des_cfg0 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A cfg0"; ++ }; ++ video_a_pwr_shdn { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR_SHDN"; ++ }; ++ video_a_cam_pwr0 { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR0"; ++ }; ++ video_a_cam_pwr1 { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR1"; ++ }; ++ video_a_cam_pwr2 { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR2"; ++ }; ++ video_a_cam_pwr3 { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR3"; ++ }; ++ video_a_des_shdn { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A DES_SHDN"; ++ }; ++ video_a_des_led { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A led"; ++ }; ++ }; ++ ++ video_a_ext1: max7325@5c { ++ compatible = "maxim,max7325"; ++ reg = <0x5c>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_a_des_cfg2 { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A cfg2"; ++ }; ++ video_a_des_cfg1 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A cfg1"; ++ }; ++ video_a_des_cfg0 { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A cfg0"; ++ }; ++ video_a_pwr_shdn { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR_SHDN"; ++ }; ++ video_a_cam_pwr0 { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR0"; ++ }; ++ video_a_cam_pwr1 { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR1"; ++ }; ++ video_a_cam_pwr3 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR3"; ++ }; ++ }; ++ }; ++ }; ++}; ++ ++&pcie_bus_clk { ++ clock-frequency = <100000000>; ++ status = "okay"; ++}; ++ ++&pciec0 { ++ status = "okay"; ++}; ++ ++&pciec1 { ++ status = "okay"; ++}; ++ ++&vin0 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin0ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ }; ++ port@1 { ++ csi0ep0: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin0_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ vin0_ti964_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep0>; ++ }; ++ vin0_ti954_des0ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep0>; ++ }; ++ }; ++ }; ++}; ++ ++&vin1 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin1ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <1>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ }; ++ port@1 { ++ csi0ep1: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin1_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ vin1_ti964_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep1>; ++ }; ++ vin1_ti954_des0ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep1>; ++ }; ++ }; ++ }; ++}; ++ ++&vin2 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin2ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <2>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ }; ++ port@1 { ++ csi0ep2: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin2_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ vin2_ti964_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep2>; ++ }; ++ }; ++ }; ++}; ++ ++&vin3 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin3ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <3>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ csi0ep3: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin3_max9286_des0ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ vin3_ti964_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep3>; ++ }; ++ }; ++ }; ++}; ++ ++&vin4 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin4ep0: endpoint { ++ csi,select = "csi20"; ++ virtual,channel = <0>; ++ remote-endpoint = <&rpi_camera_in>; ++ data-lanes = <1 2>; ++ }; ++ }; ++ port@1 { ++ csi2ep0: endpoint { ++ remote-endpoint = <&csi2_20_ep>; ++ }; ++ }; ++ }; ++}; ++ ++&csi2_40 { ++ status = "okay"; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "ycbcr422"; ++ receive,vc = <0>; ++ }; ++ csi2_vc1 { ++ data,type = "ycbcr422"; ++ receive,vc = <1>; ++ }; ++ csi2_vc2 { ++ data,type = "ycbcr422"; ++ receive,vc = <2>; ++ }; ++ csi2_vc3 { ++ data,type = "ycbcr422"; ++ receive,vc = <3>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_40_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ csi-rate = <300>; ++ }; ++ }; ++}; ++ ++&csi2_20 { ++ status = "okay"; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "raw8"; ++ receive,vc = <0>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_20_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2>; ++ csi-rate = <280>; ++ }; ++ }; ++}; ++ ++&rcar_sound { ++ pinctrl-0 = <&sound_clk_pins>; ++ ++ /* Multi DAI */ ++ #sound-dai-cells = <1>; ++ ++ rcar_sound,dai { ++ dai0 { ++ playback = <&ssi7>; ++ capture = <&ssi8>; ++ }; ++ ++ dai1 { ++ playback = <&ssi0 &src0 &dvc0>; ++ capture = <&ssi1 &src1 &dvc1>; ++ }; ++ ++ dai2 { ++ capture = <&ssi6>; ++ }; ++ }; ++}; ++ ++&sdhi3 { ++ pinctrl-0 = <&sdhi3_pins_3v3>; ++ pinctrl-names = "default"; ++ ++ vmmc-supply = <&wlan_en>; ++ vqmmc-supply = <&vccq_sdhi3>; ++ keep-power-in-suspend; ++ enable-sdio-wakeup; ++ bus-width = <4>; ++ no-1-8-v; ++ non-removable; ++ cap-power-off-card; ++ max-frequency = <26000000>; ++ status = "okay"; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ wlcore: wlcore@2 { ++ compatible = "ti,wl1837"; ++ reg = <2>; ++ interrupt-parent = <&gpio1>; ++ interrupts = <25 IRQ_TYPE_EDGE_RISING>; ++ }; ++}; ++ ++&usb2_phy0 { ++ pinctrl-0 = <&usb0_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++}; ++ ++&hsusb { ++ status = "okay"; ++}; ++ ++&ehci0 { ++ status = "okay"; ++}; ++ ++&ohci0 { ++ status = "okay"; ++}; ++ ++&xhci0 { ++ status = "okay"; ++}; ++ ++&msiof1 { ++ status = "disabled"; ++}; ++ ++&can0 { ++ pinctrl-0 = <&can0_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ ++ renesas,can-clock-select = <0x0>; ++}; ++ ++&can1 { ++ pinctrl-0 = <&can1_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ ++ renesas,can-clock-select = <0x0>; ++}; ++ ++&canfd { ++ pinctrl-0 = <&canfd0_pins &canfd1_pins>; ++ pinctrl-names = "default"; ++ status = "disabled"; ++ ++ channel0 { ++ status = "okay"; ++ }; ++ ++ channel1 { ++ status = "okay"; ++ }; ++}; ++ ++/* uncomment to enable CN47: SD on SDHI3 */ ++//#include "ulcb-kf-sd3.dtsi" +diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-view.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-view.dts +new file mode 100644 +index 0000000..1ac0041 +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-view.dts +@@ -0,0 +1,287 @@ ++/* ++ * Device Tree Source for the M3ULCB.View board on r8a7796 ++ * ++ * Copyright (C) 2016-2017 Renesas Electronics Corp. ++ * Copyright (C) 2016-2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++#include "r8a7796-m3ulcb.dts" ++ ++/ { ++ model = "Renesas M3ULCB.View board based on r8a7796"; ++}; ++ ++&i2c4 { ++ ov106xx@0 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x60>; ++ ++ port@0 { ++ ov106xx_in0: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin0ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ }; ++ }; ++ ++ ov106xx@1 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x61>; ++ ++ port@0 { ++ ov106xx_in1: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin1ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ }; ++ }; ++ ++ ov106xx@2 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x62>; ++ ++ port@0 { ++ ov106xx_in2: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin2ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ }; ++ }; ++ ++ ov106xx@3 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x63>; ++ ++ port@0 { ++ ov106xx_in3: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin3ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_des0ep3: endpoint { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ }; ++ }; ++ ++ max9286-max9271@0 { ++ compatible = "maxim,max9286-max9271"; ++ reg = <0x4c>; ++ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; ++ maxim,sensor_delay = <0>; ++ maxim,links = <4>; ++ maxim,lanes = <4>; ++ maxim,resetb-gpio = <1>; ++ maxim,fsync-mode = "automatic"; ++ maxim,timeout = <100>; ++ maxim,i2c-quirk = <0x6c>; ++ ++ port@0 { ++ max9286_des0ep0: endpoint@0 { ++ max9271-addr = <0x50>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ max9286_des0ep1: endpoint@1 { ++ max9271-addr = <0x51>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ max9286_des0ep2: endpoint@2 { ++ max9271-addr = <0x52>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ max9286_des0ep3: endpoint@3 { ++ max9271-addr = <0x53>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ max9286_csi0ep0: endpoint { ++ csi-rate = <700>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++}; ++ ++&pcie_bus_clk { ++ clock-frequency = <100000000>; ++ status = "okay"; ++}; ++ ++&pciec1 { ++ status = "okay"; ++}; ++ ++&vin0 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin0ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ }; ++ port@1 { ++ csi0ep0: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin0_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ }; ++ }; ++}; ++ ++&vin1 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin1ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <1>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ }; ++ port@1 { ++ csi0ep1: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin1_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ }; ++ }; ++}; ++ ++&vin2 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin2ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <2>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ }; ++ port@1 { ++ csi0ep2: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin2_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ }; ++ }; ++}; ++ ++&vin3 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin3ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <3>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ csi0ep3: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin3_max9286_des0ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ }; ++ }; ++}; ++ ++&csi2_40 { ++ status = "okay"; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "ycbcr422"; ++ receive,vc = <0>; ++ }; ++ csi2_vc1 { ++ data,type = "ycbcr422"; ++ receive,vc = <1>; ++ }; ++ csi2_vc2 { ++ data,type = "ycbcr422"; ++ receive,vc = <2>; ++ }; ++ csi2_vc3 { ++ data,type = "ycbcr422"; ++ receive,vc = <3>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_40_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ csi-rate = <300>; ++ }; ++ }; ++}; +diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x-view.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x-view.dts +new file mode 100644 +index 0000000..cc6866c +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x-view.dts +@@ -0,0 +1,318 @@ ++/* ++ * Device Tree Source for the Salvator-X.View board ++ * ++ * Copyright (C) 2016-2017 Renesas Electronics Corp. ++ * Copyright (C) 2016-2017 Cogent Embedded, Inc ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++#include "r8a7796-salvator-x.dts" ++ ++/ { ++ model = "Renesas Salvator-X.View board based on r8a7796"; ++}; ++ ++&pfc { ++ can0_pins: can0 { ++ groups = "can0_data_a"; ++ function = "can0"; ++ }; ++ ++ can1_pins: can1 { ++ groups = "can1_data"; ++ function = "can1"; ++ }; ++}; ++ ++&i2c4 { ++ /delete-node/hdmi-in@34; ++ /delete-node/composite-in@70; ++ ++ ov106xx@0 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x60>; ++ ++ port@0 { ++ ov106xx_in0: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin0ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ }; ++ }; ++ ++ ov106xx@1 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x61>; ++ ++ port@0 { ++ ov106xx_in1: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin1ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ }; ++ }; ++ ++ ov106xx@2 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x62>; ++ ++ port@0 { ++ ov106xx_in2: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin2ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ }; ++ }; ++ ++ ov106xx@3 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x63>; ++ ++ port@0 { ++ ov106xx_in3: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin3ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_des0ep3: endpoint { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ }; ++ }; ++ ++ max9286-max9271@0 { ++ compatible = "maxim,max9286-max9271"; ++ reg = <0x4c>; ++ gpios = <&gpio6 30 GPIO_ACTIVE_LOW>; ++ maxim,sensor_delay = <0>; ++ maxim,links = <4>; ++ maxim,lanes = <4>; ++ maxim,resetb-gpio = <1>; ++ maxim,fsync-mode = "automatic"; ++ maxim,timeout = <100>; ++ maxim,i2c-quirk = <0x6c>; ++ ++ port@0 { ++ max9286_des0ep0: endpoint@0 { ++ max9271-addr = <0x50>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ max9286_des0ep1: endpoint@1 { ++ max9271-addr = <0x51>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ max9286_des0ep2: endpoint@2 { ++ max9271-addr = <0x52>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ max9286_des0ep3: endpoint@3 { ++ max9271-addr = <0x53>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ max9286_csi0ep0: endpoint { ++ csi-rate = <700>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++}; ++ ++&vin0 { ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin0ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ }; ++ port@1 { ++ csi0ep0: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin0_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ }; ++ }; ++}; ++ ++&vin1 { ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin1ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <1>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ }; ++ port@1 { ++ csi0ep1: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin1_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ }; ++ }; ++}; ++ ++&vin2 { ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin2ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <2>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ }; ++ port@1 { ++ csi0ep2: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin2_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ }; ++ }; ++}; ++ ++&vin3 { ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin3ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <3>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ csi0ep3: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin3_max9286_des0ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ }; ++ }; ++}; ++ ++&vin4 { ++ status = "disabled"; ++}; ++ ++&vin5 { ++ status = "disabled"; ++}; ++ ++&vin6 { ++ status = "disabled"; ++}; ++ ++&vin7 { ++ status = "disabled"; ++}; ++ ++&csi2_20 { ++ status = "disabled"; ++ /delete-node/ports; ++}; ++ ++&csi2_40 { ++ /delete-node/ports; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "ycbcr422"; ++ receive,vc = <0>; ++ }; ++ csi2_vc1 { ++ data,type = "ycbcr422"; ++ receive,vc = <1>; ++ }; ++ csi2_vc2 { ++ data,type = "ycbcr422"; ++ receive,vc = <2>; ++ }; ++ csi2_vc3 { ++ data,type = "ycbcr422"; ++ receive,vc = <3>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_40_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ csi-rate = <300>; ++ }; ++ }; ++}; ++ ++&can0 { ++ pinctrl-0 = <&can0_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++}; ++ ++&can1 { ++ pinctrl-0 = <&can1_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++}; +diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-rpi.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-rpi.dtsi +new file mode 100644 +index 0000000..d3b4ece +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/ulcb-kf-rpi.dtsi +@@ -0,0 +1,75 @@ ++/* ++ * Device Tree Source for the H3ULCB Kingfisher board: ++ * this adding conflicting resource on VIN4 for Raspberry Pi camera ++ * ++ * Copyright (C) 2017 Renesas Electronics Corp. ++ * Copyright (C) 2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++&i2cswitch4 { ++ i2c@4 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <4>; ++ ++ rpi_camera: ov5647@36 { ++ compatible = "ovti,ov5647"; ++ reg = <0x36>; ++ ++ port@0 { ++ rpi_camera_in: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2>; ++ remote-endpoint = <&vin4ep0>; ++ }; ++ }; ++ }; ++ }; ++}; ++ ++&vin4 { ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin4ep0: endpoint { ++ csi,select = "csi20"; ++ virtual,channel = <0>; ++ remote-endpoint = <&rpi_camera_in>; ++ data-lanes = <1 2>; ++ }; ++ }; ++ port@1 { ++ csi2ep0: endpoint { ++ remote-endpoint = <&csi2_20_ep>; ++ }; ++ }; ++ }; ++}; ++ ++&csi2_20 { ++ status = "okay"; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "raw8"; ++ receive,vc = <0>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_20_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2>; ++ csi-rate = <280>; ++ }; ++ }; ++}; +diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-sd3.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-sd3.dtsi +new file mode 100644 +index 0000000..ef481d3 +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/ulcb-kf-sd3.dtsi +@@ -0,0 +1,33 @@ ++/* ++ * Device Tree Source for the H3/M3ULCB Kingfisher board: ++ * this overrides WIFI in favour SD on SDHI3 ++ * ++ * Copyright (C) 2017 Renesas Electronics Corp. ++ * Copyright (C) 2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++&sdio_switch { ++ regulator-name = "sd_on"; ++ enable-active-high; ++}; ++ ++&sdhi3 { ++ /delete-property/non-removable; ++ /delete-property/cap-power-off-card; ++ /delete-property/keep-power-in-suspend; ++ /delete-property/enable-sdio-wakeup; ++ /delete-property/sd-uhs-sdr104; ++ ++ vmmc-supply = <&vcc_sdhi3>; ++ max-frequency = <46000000>; ++ cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; ++ wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; ++}; ++ ++&wlcore { ++ status = "disabled"; ++}; +diff --git a/arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi b/arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi +new file mode 100644 +index 0000000..92ed4a4 +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi +@@ -0,0 +1,515 @@ ++/* ++ * Device Tree Source for the H3ULCB Videobox board: ++ * this adding conflicting resource on VIN4/VIN5/VIN6/VIN7 for CN12 ++ * ++ * Copyright (C) 2017 Renesas Electronics Corp. ++ * Copyright (C) 2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++&i2cswitch2 { ++ i2c@3 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <3>; ++ /* Slot C (CN12) */ ++ ++ ov106xx@8 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x68>; ++ ++ port@0 { ++ ov106xx_in8: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2>; ++ remote-endpoint = <&vin4ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des2ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des2ep0>; ++ }; ++ ov106xx_ti964_des2ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des2ep0>; ++ }; ++ ov106xx_ti954_des2ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des2ep0>; ++ }; ++ }; ++ }; ++ ++ ov106xx@9 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x69>; ++ ++ port@0 { ++ ov106xx_in9: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2>; ++ remote-endpoint = <&vin5ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des2ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des2ep1>; ++ }; ++ ov106xx_ti964_des2ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des2ep1>; ++ }; ++ ov106xx_ti954_des2ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des2ep1>; ++ }; ++ }; ++ }; ++ ++ ov106xx@10 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x6a>; ++ ++ port@0 { ++ ov106xx_in10: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2>; ++ remote-endpoint = <&vin6ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des2ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des2ep2>; ++ }; ++ ov106xx_ti964_des2ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des2ep2>; ++ }; ++ }; ++ }; ++ ++ ov106xx@11 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x6b>; ++ ++ port@0 { ++ ov106xx_in11: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2>; ++ remote-endpoint = <&vin7ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des2ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des2ep3>; ++ }; ++ ov106xx_ti964_des2ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des2ep3>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB964 @ 0x3a */ ++ ti964-ti9x3@2 { ++ compatible = "ti,ti964-ti9x3"; ++ reg = <0x3a>; ++ ti,sensor_delay = <350>; ++ ti,links = <4>; ++ ti,lanes = <2>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "coax"; ++ ++ port@0 { ++ ti964_des2ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in8>; ++ }; ++ ti964_des2ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in9>; ++ }; ++ ti964_des2ep2: endpoint@2 { ++ ti9x3-addr = <0x0e>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in10>; ++ }; ++ ti964_des2ep3: endpoint@3 { ++ ti9x3-addr = <0x0f>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in11>; ++ }; ++ }; ++ port@1 { ++ ti964_csi1ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_20_ep>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB954 @ 0x38 */ ++ ti954-ti9x3@2 { ++ compatible = "ti,ti954-ti9x3"; ++ reg = <0x38>; ++ /* gpios = <&video_c_ext1 10 GPIO_ACTIVE_HIGH>; */ ++ ti,sensor_delay = <350>; ++ ti,links = <2>; ++ ti,lanes = <2>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "coax"; ++ ++ port@0 { ++ ti954_des2ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in8>; ++ }; ++ ti954_des2ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in9>; ++ }; ++ }; ++ port@1 { ++ ti954_csi1ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_20_ep>; ++ }; ++ }; ++ }; ++ ++ /* MAX9286 @ 0x2c */ ++ max9286-max9271@2 { ++ compatible = "maxim,max9286-max9271"; ++ reg = <0x2c>; ++ maxim,sensor_delay = <350>; ++ maxim,links = <4>; ++ maxim,lanes = <2>; ++ maxim,resetb-gpio = <1>; ++ maxim,fsync-mode = "automatic"; ++ maxim,timeout = <100>; ++ ++ port@0 { ++ max9286_des2ep0: endpoint@0 { ++ max9271-addr = <0x50>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in8>; ++ }; ++ max9286_des2ep1: endpoint@1 { ++ max9271-addr = <0x51>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in9>; ++ }; ++ max9286_des2ep2: endpoint@2 { ++ max9271-addr = <0x52>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in10>; ++ }; ++ max9286_des2ep3: endpoint@3 { ++ max9271-addr = <0x53>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in11>; ++ }; ++ }; ++ port@1 { ++ max9286_csi1ep0: endpoint { ++ csi-rate = <700>; ++ remote-endpoint = <&csi2_20_ep>; ++ }; ++ }; ++ }; ++ }; ++ ++ i2c@4 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <4>; ++ /* Slot C (CN12) */ ++ ++ video_c_ext0: pca9535@26 { ++ compatible = "nxp,pca9535"; ++ reg = <0x26>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_c_des_cfg1 { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-C cfg1"; ++ }; ++ video_c_des_cfg0 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-C cfg0"; ++ }; ++ video_c_pwr_shdn { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-C PWR_SHDN"; ++ }; ++ video_c_cam_pwr0 { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-C PWR0"; ++ }; ++ video_c_cam_pwr1 { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-C PWR1"; ++ }; ++ video_c_cam_pwr2 { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-C PWR2"; ++ }; ++ video_c_cam_pwr3 { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-C PWR3"; ++ }; ++ video_c_des_shdn { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-C DES_SHDN"; ++ }; ++ video_c_des_led { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-C led"; ++ }; ++ }; ++ ++ video_c_ext1: max7325@5c { ++ compatible = "maxim,max7325"; ++ reg = <0x5c>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_c_des_cfg2 { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-C cfg2"; ++ }; ++ video_c_des_cfg1 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-C cfg1"; ++ }; ++ video_c_des_cfg0 { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-C cfg0"; ++ }; ++ video_c_pwr_shdn { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-C PWR_SHDN"; ++ }; ++ video_c_cam_pwr0 { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-C PWR0"; ++ }; ++ video_c_cam_pwr1 { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-C PWR1"; ++ }; ++ video_c_cam_pwr2 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-C PWR2"; ++ }; ++ video_c_cam_pwr3 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-C PWR3"; ++ }; ++ video_c_des_shdn { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-C DES_SHDN"; ++ }; ++ video_c_led { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-C LED"; ++ }; ++ }; ++ }; ++}; ++ ++&vin4 { ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin4ep0: endpoint { ++ csi,select = "csi20"; ++ virtual,channel = <0>; ++ remote-endpoint = <&ov106xx_in8>; ++ data-lanes = <1 2>; ++ }; ++ }; ++ port@1 { ++ csi2ep0: endpoint { ++ remote-endpoint = <&csi2_20_ep>; ++ }; ++ }; ++ port@2 { ++ vin4_max9286_des2ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des2ep0>; ++ }; ++ vin4_ti964_des2ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des2ep0>; ++ }; ++ vin4_ti954_des2ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des2ep0>; ++ }; ++ }; ++ }; ++}; ++ ++&vin5 { ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin5ep0: endpoint@0 { ++ csi,select = "csi20"; ++ virtual,channel = <1>; ++ remote-endpoint = <&ov106xx_in9>; ++ data-lanes = <1 2>; ++ }; ++ }; ++ port@1 { ++ csi2ep1: endpoint { ++ remote-endpoint = <&csi2_20_ep>; ++ }; ++ }; ++ port@2 { ++ vin5_max9286_des2ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des2ep1>; ++ }; ++ vin5_ti964_des2ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des2ep1>; ++ }; ++ vin5_ti954_des2ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des2ep1>; ++ }; ++ }; ++ }; ++}; ++ ++&vin6 { ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin6ep0: endpoint@0 { ++ csi,select = "csi20"; ++ virtual,channel = <2>; ++ remote-endpoint = <&ov106xx_in10>; ++ data-lanes = <1 2>; ++ }; ++ }; ++ port@1 { ++ csi2ep2: endpoint { ++ remote-endpoint = <&csi2_20_ep>; ++ }; ++ }; ++ port@2 { ++ vin6_max9286_des2ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des2ep2>; ++ }; ++ vin6_ti964_des2ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des2ep2>; ++ }; ++ }; ++ }; ++}; ++ ++&vin7 { ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin7ep0: endpoint@0 { ++ csi,select = "csi20"; ++ virtual,channel = <3>; ++ remote-endpoint = <&ov106xx_in11>; ++ data-lanes = <1 2>; ++ }; ++ }; ++ port@1 { ++ csi2ep3: endpoint { ++ remote-endpoint = <&csi2_20_ep>; ++ }; ++ }; ++ port@2 { ++ vin7_max9286_des2ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des2ep3>; ++ }; ++ vin7_ti964_des2ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des2ep3>; ++ }; ++ }; ++ }; ++}; ++ ++&csi2_20 { ++ status = "okay"; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "ycbcr422"; ++ receive,vc = <0>; ++ }; ++ csi2_vc1 { ++ data,type = "ycbcr422"; ++ receive,vc = <1>; ++ }; ++ csi2_vc2 { ++ data,type = "ycbcr422"; ++ receive,vc = <2>; ++ }; ++ csi2_vc3 { ++ data,type = "ycbcr422"; ++ receive,vc = <3>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_20_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2>; ++ csi-rate = <300>; ++ }; ++ }; ++}; +-- +1.9.1 + diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0041-arm64-dts-r8a7795-h3ulcb-kf-add-ADAS-board.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0041-arm64-dts-r8a7795-h3ulcb-kf-add-ADAS-board.patch deleted file mode 100644 index 1a50c81..0000000 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0041-arm64-dts-r8a7795-h3ulcb-kf-add-ADAS-board.patch +++ /dev/null @@ -1,2137 +0,0 @@ -From f1f043eab3dd06552b3600af1caf50e535f766f1 Mon Sep 17 00:00:00 2001 -From: Vladimir Barinov <vladimir.barinov@cogentembedded.com> -Date: Wed, 4 Jan 2017 10:37:23 +0300 -Subject: [PATCH] arm64: dts: r8a7795-h3ulcb-kf: add ADAS board - -Kingfisher board on R8A7795 SoC - -Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> ---- - arch/arm64/boot/dts/renesas/Makefile | 1 + - .../boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts | 443 ++++++ - arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts | 1651 ++++++++++++++++++++ - 3 files changed, 2095 insertions(+) - create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts - create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts - -diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile -index d163df7..86a08db 100644 ---- a/arch/arm64/boot/dts/renesas/Makefile -+++ b/arch/arm64/boot/dts/renesas/Makefile -@@ -15,6 +15,7 @@ dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb r8a7796-m3ulcb-kf-v1.dtb - dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x-view.dtb - dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-view.dtb - dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-had-alfa.dtb r8a7795-h3ulcb-had-beta.dtb -+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb r8a7795-h3ulcb-kf-v1.dtb - - always := $(dtb-y) - clean-files := *.dtb -diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts -new file mode 100644 -index 0000000..4b10d31 ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts -@@ -0,0 +1,443 @@ -+/* -+ * Device Tree Source for the H3ULCB Kingfisher V1 board -+ * -+ * Copyright (C) 2017 Renesas Electronics Corp. -+ * Copyright (C) 2017 Cogent Embedded, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+#include "r8a7795-h3ulcb-kf.dts" -+ -+/ { -+ model = "Renesas H3ULCB Kingfisher V1 board based on r8a7795"; -+ -+ aliases { -+ serial1 = &hscif0; -+ serial2 = &hscif1; -+ serial3 = &scif1; -+ }; -+ -+ wlan_en: regulator@4 { -+ compatible = "regulator-fixed"; -+ regulator-name = "wlan-en-regulator"; -+ -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ gpio = <&gpio_ext_74 4 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ }; -+ -+ codec_en_reg: regulator@6 { -+ compatible = "regulator-fixed"; -+ regulator-name = "codec-en-regulator"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ gpio = <&gpio_ext_74 15 0>; -+ -+ /* delay - CHECK */ -+ startup-delay-us = <70000>; -+ enable-active-high; -+ }; -+ -+ amp_en_reg: regulator@7 { -+ compatible = "regulator-fixed"; -+ regulator-name = "amp-en-regulator"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ gpio = <&gpio_ext_74 0 0>; -+ -+ startup-delay-us = <0>; -+ enable-active-high; -+ }; -+ -+ /delete-node/regulator@8; -+ -+ sdio_switch: regulator@9 { -+ compatible = "regulator-fixed"; -+ regulator-name = "wifi_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_74 5 0>; -+ enable-active-low; -+ regulator-always-on; -+ }; -+ -+ /delete-node/regulator@10; -+ -+ radio_switch: regulator@11 { -+ compatible = "regulator-fixed"; -+ regulator-name = "radio_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_74 13 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ -+ kim { -+ compatible = "kim"; -+ nshutdown_gpio = <343>; /* gpio_ext_74 pin 3 */ -+ /* serial1 */ -+ dev_name = "/dev/ttySC1"; -+ flow_cntrl = <1>; -+ /* int div 8 hscif@26.6666656MHz */ -+ baud_rate = <3333332>; -+ }; -+ -+ hdmi-out { -+ compatible = "hdmi-connector"; -+ type = "a"; -+ -+ port { -+ hdmi_con: endpoint { -+ remote-endpoint = <&adv7513_out>; -+ }; -+ }; -+ }; -+}; -+ -+&pfc { -+ /delete-node/hscif4; -+ -+ scif1_pins: scif1 { -+ groups = "scif1_data_b"; -+ function = "scif1"; -+ }; -+ -+ hscif0_pins: hscif0 { -+ groups = "hscif0_data", "hscif0_ctrl"; -+ function = "hscif0"; -+ }; -+ -+ hscif1_pins: hscif1 { -+ groups = "hscif1_data_a", "hscif1_ctrl_a"; -+ function = "hscif1"; -+ }; -+ -+ du_pins: du { -+ groups = "du_rgb888", "du_sync", "du_clk_out_0", "du_disp"; -+ function = "du"; -+ }; -+}; -+ -+&du { -+ pinctrl-0 = <&du_pins>; -+ pinctrl-names = "default"; -+ -+ ports { -+ port@0 { -+ endpoint { -+ remote-endpoint = <&adv7513_in>; -+ }; -+ }; -+ port@1 { -+ endpoint { -+ remote-endpoint = <&rcar_dw_hdmi0_in>; -+ }; -+ }; -+ }; -+}; -+ -+&gpio0 { -+ /delete-node/video_a_irq; -+ /delete-node/video_b_irq; -+ /delete-node/gpioext_2_20_irq; -+}; -+ -+&gpio1 { -+ /delete-node/gpioext_2_21_irq; -+ /delete-node/wifi_irq; -+}; -+ -+&gpio2 { -+ bl_pwm { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "BL PWM 100%"; -+ }; -+}; -+ -+&gpio5 { -+ /delete-node/touch_irq; -+ /delete-node/bt_strap; -+ -+ /* V1 has h/w bug with swapped RTS and CTS on BT interface */ -+ /* Ignore these pins */ -+ hscif0_cts { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "hscif0 CTS"; -+ }; -+ -+ hscif0_rts { -+ gpio-hog; -+ gpios = <16 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "hscif0 RTS"; -+ }; -+}; -+ -+&gpio7 { -+ /delete-node/gpioext_2_21_irq; -+}; -+ -+&scif1 { -+ pinctrl-0 = <&scif1_pins>; -+ pinctrl-names = "default"; -+ -+ status = "okay"; -+}; -+ -+&hscif0 { -+ pinctrl-0 = <&hscif0_pins>; -+ pinctrl-names = "default"; -+ ctsrts; -+ -+ status = "okay"; -+}; -+ -+&hscif1 { -+ pinctrl-0 = <&hscif1_pins>; -+ pinctrl-names = "default"; -+ -+ status = "okay"; -+}; -+ -+&hscif4 { -+ /delete-property/pinctrl-0; -+ /delete-property/pinctrl-names; -+ -+ status = "disabled"; -+}; -+ -+&i2c2 { -+ /delete-node/pca9535@20; -+ /delete-node/pca9535@21; -+ -+ gpio_ext_74: pca9539@74 { -+ compatible = "nxp,pca9539"; -+ reg = <0x74>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio6>; -+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>; -+ -+ hub_pwen { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "HUB pwen"; -+ }; -+ hub_rst { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "HUB rst"; -+ }; -+ otg_offvbus { -+ gpio-hog; -+ gpios = <8 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "OTG off VBUSn"; -+ }; -+ otg_extlpn { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "OTG EXTLPn"; -+ }; -+ otg_stat1 { -+ gpio-hog; -+ gpios = <10 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "OTG Stat1"; -+ }; -+ otg_stat2 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "OTG Stat2"; -+ }; -+ }; -+ -+ gpio_ext_75: pca9539@75 { -+ compatible = "nxp,pca9539"; -+ reg = <0x75>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio6>; -+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>; -+ -+ gps_rst { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "GPS rst"; -+ }; -+ fpdl_shdn { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "FPDLink shdn"; -+ }; -+ }; -+}; -+ -+&i2cswitch2 { -+ reg = <0x71>; -+ reset-gpios= <&gpio5 3 GPIO_ACTIVE_LOW>; -+ -+ i2c@4 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <4>; -+ -+ hdmi@3d { -+ compatible = "adi,adv7511w"; -+ reg = <0x3d>; -+ interrupt-parent = <&gpio2>; -+ interrupts = <0 IRQ_TYPE_EDGE_BOTH>; -+ pd-gpios = <&gpio_ext_75 5 GPIO_ACTIVE_LOW>; -+ -+ adi,input-depth = <8>; -+ adi,input-colorspace = "rgb"; -+ adi,input-clock = "1x"; -+ adi,input-style = <1>; -+ adi,input-justification = "evenly"; -+ adi,clock-delay = <1200>; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ reg = <0>; -+ adv7513_in: endpoint { -+ remote-endpoint = <&du_out_rgb>; -+ }; -+ }; -+ -+ port@1 { -+ reg = <1>; -+ adv7513_out: endpoint { -+ remote-endpoint = <&hdmi_con>; -+ }; -+ }; -+ }; -+ }; -+ }; -+}; -+ -+&i2c4 { -+ /delete-node/pca9535@21; -+ -+ gpio_ext_76: pca9539@76 { -+ compatible = "nxp,pca9539"; -+ reg = <0x76>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio7>; -+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>; -+ -+ port_b_a0 { -+ gpio-hog; -+ gpios = <0 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-B A0"; -+ }; -+ port_b_a1 { -+ gpio-hog; -+ gpios = <1 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B A1"; -+ }; -+ port_a_a0 { -+ gpio-hog; -+ gpios = <2 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-A A0"; -+ }; -+ port_a_a1 { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A A1"; -+ }; -+ /* pin 12 - CAM_CLK */ -+ rpi_cam_io_1 { -+ gpio-hog; -+ gpios = <10 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "RaspB_IO1"; -+ }; -+ /* pin 11 - CAM_GPIO - assume pwdn */ -+ rpi_cam_io_0 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "RaspB_IO0"; -+ }; -+ /* 0 - FPDLink output, 1 - LVDS output */ -+ lvds_vs_fpdl { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "LVDS switch"; -+ }; -+ }; -+ -+ gpio_ext_77: pca9539@77 { -+ compatible = "nxp,pca9539"; -+ reg = <0x77>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio5>; -+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>; -+ -+ mpcie_wake { -+ gpio-hog; -+ gpios = <0 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "mPCIe WAKE#"; -+ }; -+ mpcie_wdisable { -+ gpio-hog; -+ gpios = <1 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "mPCIe W_DISABLE"; -+ }; -+ mpcie_clreq { -+ gpio-hog; -+ gpios = <2 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "mPCIe CLKREQ#"; -+ }; -+ mpcie_ovc { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "mPCIe OVC"; -+ }; -+ }; -+}; -+ -+&i2cswitch4 { -+ reg = <0x71>; -+ reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>; -+}; -+ -+&wlcore { -+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>; -+}; -diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts -new file mode 100644 -index 0000000..2c50230 ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts -@@ -0,0 +1,1651 @@ -+/* -+ * Device Tree Source for the H3ULCB Kingfisher board on r8a7795 -+ * -+ * Copyright (C) 2017 Renesas Electronics Corp. -+ * Copyright (C) 2017 Cogent Embedded, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+#include "r8a7795-h3ulcb.dts" -+ -+/ { -+ model = "Renesas H3ULCB Kingfisher board based on r8a7795"; -+ -+ aliases { -+ serial1 = &hscif4; -+ }; -+ -+ snd_clk: snd_clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <24576000>; -+ clock-output-names = "scki"; -+ }; -+ -+ wlan_en: regulator@4 { -+ compatible = "regulator-fixed"; -+ regulator-name = "wlan-en-regulator"; -+ -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ gpio = <&gpio_ext_20 4 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ }; -+ -+ vcc_sdhi3: regulator@41 { -+ compatible = "regulator-fixed"; -+ -+ regulator-name = "SDHI3 Vcc"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ -+ vccq_sdhi3: regulator@5 { -+ compatible = "regulator-fixed"; -+ -+ regulator-name = "SDHI3 VccQ"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ }; -+ -+ codec_en_reg: regulator@6 { -+ compatible = "regulator-fixed"; -+ regulator-name = "codec-en-regulator"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ gpio = <&gpio_ext_20 15 0>; -+ -+ /* delay - CHECK */ -+ startup-delay-us = <70000>; -+ enable-active-high; -+ }; -+ -+ amp_en_reg: regulator@7 { -+ compatible = "regulator-fixed"; -+ regulator-name = "amp-en-regulator"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ gpio = <&gpio_ext_20 0 0>; -+ -+ startup-delay-us = <0>; -+ enable-active-high; -+ }; -+ -+ lvds_switch: regulator@8 { -+ compatible = "regulator-fixed"; -+ regulator-name = "lvds_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio1 24 0>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ -+ sdio_switch: regulator@9 { -+ compatible = "regulator-fixed"; -+ regulator-name = "wifi_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_20 5 0>; -+ enable-active-low; -+ regulator-always-on; -+ }; -+ -+ sound_switch: regulator@10 { -+ compatible = "regulator-fixed"; -+ regulator-name = "pcm3168a_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_21 5 0>; -+ enable-active-low; -+ regulator-always-on; -+ }; -+ -+ radio_switch: regulator@11 { -+ compatible = "regulator-fixed"; -+ regulator-name = "radio_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_20 13 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ -+ kim { -+ compatible = "kim"; -+ nshutdown_gpio = <343>; /* pca9535@i2c2.0x20 pin 3 */ -+ /* serial1 */ -+ dev_name = "/dev/ttySC1"; -+ flow_cntrl = <1>; -+ /* int div 8 hscif@26.6666656MHz */ -+ baud_rate = <3333332>; -+ }; -+ -+ btwilink { -+ compatible = "btwilink"; -+ }; -+ -+ sound_ext: sound@0 { -+ pinctrl-0 = <&sound_0_pins>; -+ pinctrl-names = "default"; -+ compatible = "simple-audio-card"; -+ -+ simple-audio-card,format = "left_j"; -+ simple-audio-card,name = "pcm3168a"; -+ -+ simple-audio-card,bitclock-master = <&sound_ext_master>; -+ simple-audio-card,frame-master = <&sound_ext_master>; -+ sound_ext_master: simple-audio-card,cpu@0 { -+ sound-dai = <&rcar_sound 0>; -+ dai-tdm-slot-num = <8>; -+ dai-tdm-slot-width = <32>; -+ }; -+ -+ simple-audio-card,codec@0 { -+ sound-dai = <&pcm3168a>; -+ dai-tdm-slot-num = <8>; -+ dai-tdm-slot-width = <32>; -+ system-clock-frequency = <24576000>; -+ }; -+ }; -+ -+ /delete-node/sound; -+ -+ rsnd_ak4613: sound@1 { -+ pinctrl-0 = <&sound_1_pins>; -+ pinctrl-names = "default"; -+ compatible = "simple-audio-card"; -+ -+ simple-audio-card,format = "left_j"; -+ simple-audio-card,name = "ak4613"; -+ -+ simple-audio-card,bitclock-master = <&sndcpu>; -+ simple-audio-card,frame-master = <&sndcpu>; -+ -+ sndcpu: simple-audio-card,cpu@1 { -+ sound-dai = <&rcar_sound 1>; -+ }; -+ -+ sndcodec: simple-audio-card,codec@1 { -+ sound-dai = <&ak4613>; -+ }; -+ }; -+ -+ sound_radio: sound@2 { -+ pinctrl-0 = <&sound_2_pins>; -+ pinctrl-names = "default"; -+ compatible = "simple-audio-card"; -+ -+ simple-audio-card,format = "i2s"; -+ simple-audio-card,name = "radio"; -+ -+ simple-audio-card,bitclock-master = <&sound_radio_master>; -+ simple-audio-card,frame-master = <&sound_radio_master>; -+ simple-audio-card,cpu@2 { -+ sound-dai = <&rcar_sound 2>; -+ }; -+ -+ sound_radio_master: simple-audio-card,codec@2 { -+ sound-dai = <&radio>; -+ system-clock-frequency = <12288000>; -+ }; -+ }; -+ -+ lvds-encoder { -+ compatible = "thine,thc63lvdm83d"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ port@0 { -+ reg = <0>; -+ lvds_enc_in: endpoint { -+ remote-endpoint = <&du_out_lvds0>; -+ }; -+ }; -+ port@1 { -+ reg = <1>; -+ lvds_enc_out: endpoint { -+ remote-endpoint = <&lvds_in>; -+ }; -+ }; -+ }; -+ }; -+ -+ lvds { -+ compatible = "lvds-connector"; -+ -+ width-mm = <210>; -+ height-mm = <158>; -+ -+ panel-timing { -+ /* 1280x800 @60Hz */ -+ clock-frequency = <65000000>; -+ hactive = <1280>; -+ vactive = <800>; -+ hsync-len = <40>; -+ hfront-porch = <80>; -+ hback-porch = <40>; -+ vfront-porch = <14>; -+ vback-porch = <14>; -+ vsync-len = <4>; -+ }; -+ -+ port { -+ lvds_in: endpoint { -+ remote-endpoint = <&lvds_enc_out>; -+ }; -+ }; -+ }; -+ -+ radio: si468x@0 { -+ compatible = "si,si468x-pcm"; -+ status = "okay"; -+ -+ #sound-dai-cells = <0>; -+ }; -+}; -+ -+&pfc { -+ hscif4_pins: hscif4 { -+ groups = "hscif4_data_a", "hscif4_ctrl"; -+ function = "hscif4"; -+ }; -+ -+ sdhi3_pins_3v3: sd3_3v3 { -+ groups = "sdhi3_data4", "sdhi3_ctrl"; -+ function = "sdhi3"; -+ power-source = <3300>; -+ }; -+ -+ sound_0_pins: sound0 { -+ groups = "ssi78_ctrl", "ssi7_data", "ssi8_data"; -+ function = "ssi"; -+ }; -+ -+ sound_1_pins: sound1 { -+ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; -+ function = "ssi"; -+ }; -+ -+ sound_2_pins: sound2 { -+ groups = "ssi6_ctrl", "ssi6_data"; -+ function = "ssi"; -+ }; -+ -+ usb0_pins: usb0 { -+ groups = "usb0"; -+ function = "usb0"; -+ }; -+ -+ can0_pins: can0 { -+ groups = "can0_data_a"; -+ function = "can0"; -+ }; -+ -+ can1_pins: can1 { -+ groups = "can1_data"; -+ function = "can1"; -+ }; -+ -+ canfd0_pins: canfd0 { -+ groups = "canfd0_data_a"; -+ function = "canfd0"; -+ }; -+ -+ canfd1_pins: canfd1 { -+ groups = "canfd1_data"; -+ function = "canfd1"; -+ }; -+}; -+ -+&gpio0 { -+ video_a_irq { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-A irq"; -+ }; -+ -+ video_b_irq { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-B irq"; -+ }; -+ -+ gpioext_2_20_irq { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "0x20@i2c2 irq"; -+ }; -+}; -+ -+&gpio1 { -+ gpioext_2_21_irq { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "0x21@i2c2 irq"; -+ }; -+ -+ wifi_irq { -+ gpio-hog; -+ gpios = <25 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "wifi irq"; -+ }; -+}; -+ -+&gpio5 { -+ touch_irq { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "touch irq"; -+ }; -+ -+ /* From TI forum */ -+ /* BT_AUD_OUT should be pulled low when WL_EN is activated. */ -+ /* in case it isn't, wilink8 ends up in one of the test modes that introduces various issues */ -+ bt_strap { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "BT strap pin"; -+ }; -+}; -+ -+&gpio7 { -+ gpioext_2_21_irq { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "0x21@i2c4 irq"; -+ }; -+}; -+ -+&hscif4 { -+ pinctrl-0 = <&hscif4_pins>; -+ pinctrl-names = "default"; -+ ctsrts; -+ -+ status = "okay"; -+}; -+ -+&i2c2 { -+ clock-frequency = <400000>; -+ -+ gpio_ext_20: pca9535@20 { -+ compatible = "nxp,pca9535"; -+ reg = <0x20>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio0>; -+ interrupts = <15 IRQ_TYPE_EDGE_FALLING>; -+ }; -+ -+ gpio_ext_21: pca9535@21 { -+ compatible = "nxp,pca9535"; -+ reg = <0x21>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio1>; -+ interrupts = <15 IRQ_TYPE_EDGE_FALLING>; -+ }; -+ -+ i2cswitch2: pca9548@74 { -+ compatible = "nxp,pca9548"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x74>; -+ reset-gpios = <&gpio6 5 GPIO_ACTIVE_LOW>; -+ -+ i2c@0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0>; -+ /* BCM node(s) */ -+ }; -+ -+ i2c@1 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <1>; -+ /* USB3.0 HUB node(s) */ -+ }; -+ -+ i2c@2 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <2>; -+ /* Power amp node(s) */ -+ }; -+ -+ i2c@3 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <3>; -+ /* Radio node(s) */ -+ }; -+ -+ i2c@4 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <4>; -+ /* A2B node(s) */ -+ }; -+ -+ i2c@5 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <5>; -+ /* PCIe node(s) */ -+ }; -+ -+ i2c@6 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <6>; -+ /* LVDS display node(s) */ -+ -+ polytouch: edt-ft5x06@38 { -+ compatible = "edt,edt-ft5x06"; -+ reg = <0x38>; -+ interrupt-parent = <&gpio5>; -+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>; -+ }; -+ }; -+ -+ i2c@7 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <7>; -+ /* Audio, GPS and Gyro node(s) */ -+ -+ pcm3168a: audio-codec@44 { -+ #sound-dai-cells = <0>; -+ compatible = "ti,pcm3168a"; -+ reg = <0x44>; -+ clocks = <&snd_clk>; -+ clock-names = "scki"; -+ tdm; -+ VDD1-supply = <&codec_en_reg>; -+ VDD2-supply = <&codec_en_reg>; -+ VCCAD1-supply = <&codec_en_reg>; -+ VCCAD2-supply = <&codec_en_reg>; -+ VCCDA1-supply = <&_en_reg>; -+ VCCDA2-supply = <&_en_reg>; -+ }; -+ -+ lsm9ds0_acc_mag@1d { -+ compatible = "st,lsm9ds0_acc_mag"; -+ reg = <0x1d>; -+ }; -+ -+ lsm9ds0_gyr@6b { -+ compatible = "st,lsm9ds0-gyro"; -+ reg = <0x6b>; -+ }; -+ -+ /* GPS@ 0x42 */ -+ }; -+ }; -+}; -+ -+&i2c4 { -+ gpio_ext_22: pca9535@21 { -+ compatible = "nxp,pca9535"; -+ reg = <0x22>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio7>; -+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>; -+ -+ /* pin 12 - CAM_CLK */ -+ rpi_cam_io_1 { -+ gpio-hog; -+ gpios = <10 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "RaspB_IO1"; -+ }; -+ /* pin 11 - CAM_GPIO - assume pwdn */ -+ rpi_cam_io_0 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "RaspB_IO0"; -+ }; -+ }; -+ -+ i2cswitch4: pca9548@74 { -+ compatible = "nxp,pca9548"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x74>; -+ reset-gpios= <&gpio6 21 GPIO_ACTIVE_LOW>; -+ -+ i2c@0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0>; -+ /* SAM node(s) */ -+ }; -+ -+ i2c@1 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <1>; -+ /* Slot A (CN10) */ -+ -+ ov106xx@0 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x60>; -+ -+ port@0 { -+ ov106xx_in0: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin0ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep0>; -+ }; -+ ov106xx_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; -+ }; -+ ov106xx_ti954_des0ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep0>; -+ }; -+ }; -+ }; -+ -+ ov106xx@1 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x61>; -+ -+ port@0 { -+ ov106xx_in1: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin1ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep1>; -+ }; -+ ov106xx_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; -+ }; -+ ov106xx_ti954_des0ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep1>; -+ }; -+ }; -+ }; -+ -+ ov106xx@2 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x62>; -+ -+ port@0 { -+ ov106xx_in2: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin2ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep2>; -+ }; -+ ov106xx_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; -+ }; -+ }; -+ }; -+ -+ ov106xx@3 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x63>; -+ -+ port@0 { -+ ov106xx_in3: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin3ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep3>; -+ }; -+ ov106xx_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB964 @ 0x3a */ -+ ti964-ti9x3@0 { -+ compatible = "ti,ti964-ti9x3"; -+ reg = <0x3a>; -+ gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; -+ ti,sensor_delay = <350>; -+ ti,links = <4>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "coax"; -+ -+ port@0 { -+ ti964_des0ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ ti964_des0ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ ti964_des0ep2: endpoint@2 { -+ ti9x3-addr = <0x0e>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ ti964_des0ep3: endpoint@3 { -+ ti9x3-addr = <0x0f>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ ti964_csi0ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB954 @ 0x38 */ -+ ti954-ti9x3@0 { -+ compatible = "ti,ti954-ti9x3"; -+ reg = <0x38>; -+ gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; -+ ti,sensor_delay = <350>; -+ ti,links = <2>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "coax"; -+ -+ port@0 { -+ ti954_des0ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ ti954_des0ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ }; -+ port@1 { -+ ti954_csi0ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ -+ /* MAX9286 @ 0x2a */ -+ max9286-max9271@0 { -+ compatible = "maxim,max9286-max9271"; -+ reg = <0x2a>; -+ maxim,sensor_delay = <350>; -+ maxim,links = <4>; -+ maxim,lanes = <4>; -+ maxim,resetb-gpio = <1>; -+ maxim,fsync-mode = "automatic"; -+ maxim,timeout = <100>; -+ -+ port@0 { -+ max9286_des0ep0: endpoint@0 { -+ max9271-addr = <0x50>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ max9286_des0ep1: endpoint@1 { -+ max9271-addr = <0x51>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ max9286_des0ep2: endpoint@2 { -+ max9271-addr = <0x52>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ max9286_des0ep3: endpoint@3 { -+ max9271-addr = <0x53>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ max9286_csi0ep0: endpoint { -+ csi-rate = <700>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ }; -+ -+ i2c@2 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <2>; -+ /* Slot B (CN11) */ -+ -+ ov106xx@4 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x64>; -+ -+ port@0 { -+ ov106xx_in4: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin4ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep0>; -+ }; -+ ov106xx_ti964_des1ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep0>; -+ }; -+ ov106xx_ti954_des1ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep0>; -+ }; -+ }; -+ }; -+ -+ ov106xx@5 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x65>; -+ -+ port@0 { -+ ov106xx_in5: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin5ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep1>; -+ }; -+ ov106xx_ti964_des1ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep1>; -+ }; -+ ov106xx_ti954_des1ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep1>; -+ }; -+ }; -+ }; -+ -+ ov106xx@6 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x66>; -+ -+ port@0 { -+ ov106xx_in6: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin6ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep2>; -+ }; -+ ov106xx_ti964_des1ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep2>; -+ }; -+ }; -+ }; -+ -+ ov106xx@7 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x67>; -+ -+ port@0 { -+ ov106xx_in7: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin7ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep3>; -+ }; -+ ov106xx_ti964_des1ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep3>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB964 @ 0x3a */ -+ ti964-ti9x3@1 { -+ compatible = "ti,ti964-ti9x3"; -+ reg = <0x3a>; -+ gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>; -+ ti,sensor_delay = <350>; -+ ti,links = <4>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "coax"; -+ -+ port@0 { -+ ti964_des1ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ ti964_des1ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ ti964_des1ep2: endpoint@2 { -+ ti9x3-addr = <0x0e>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in6>; -+ }; -+ ti964_des1ep3: endpoint@3 { -+ ti9x3-addr = <0x0f>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in7>; -+ }; -+ }; -+ port@1 { -+ ti964_csi2ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB954 @ 0x38 */ -+ ti954-ti9x3@1 { -+ compatible = "ti,ti954-ti9x3"; -+ reg = <0x38>; -+ gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>; -+ ti,sensor_delay = <350>; -+ ti,links = <2>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "coax"; -+ -+ port@0 { -+ ti954_des1ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ ti954_des1ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ }; -+ port@1 { -+ ti954_csi2ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+ -+ /* MAX9286 @ 0x2a */ -+ max9286-max9271@1 { -+ compatible = "maxim,max9286-max9271"; -+ reg = <0x2a>; -+ maxim,sensor_delay = <350>; -+ maxim,links = <4>; -+ maxim,lanes = <4>; -+ maxim,resetb-gpio = <1>; -+ maxim,fsync-mode = "automatic"; -+ maxim,timeout = <100>; -+ -+ port@0 { -+ max9286_des1ep0: endpoint@0 { -+ max9271-addr = <0x50>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ max9286_des1ep1: endpoint@1 { -+ max9271-addr = <0x51>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ max9286_des1ep2: endpoint@2 { -+ max9271-addr = <0x52>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in6>; -+ }; -+ max9286_des1ep3: endpoint@3 { -+ max9271-addr = <0x53>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in7>; -+ }; -+ }; -+ port@1 { -+ max9286_csi2ep0: endpoint { -+ csi-rate = <700>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+ }; -+ -+ i2c@6 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <6>; -+ /* Slot B (CN11) */ -+ -+ video_b_ext0: pca9535@27 { -+ compatible = "nxp,pca9535"; -+ reg = <0x27>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_b_des_cfg1 { -+ gpio-hog; -+ gpios = <5 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B cfg1"; -+ }; -+ video_b_des_cfg0 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B cfg0"; -+ }; -+ video_b_pwr_shdn { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR_SHDN"; -+ }; -+ video_b_cam_pwr0 { -+ gpio-hog; -+ gpios = <12 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR0"; -+ }; -+ video_b_cam_pwr1 { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR1"; -+ }; -+ video_b_cam_pwr2 { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR2"; -+ }; -+ video_b_cam_pwr3 { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR3"; -+ }; -+ video_b_des_shdn { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B DES_SHDN"; -+ }; -+ video_b_des_led { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-B led"; -+ }; -+ }; -+ -+ video_b_ext1: max7325@5c { -+ compatible = "maxim,max7325"; -+ reg = <0x5c>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_b_des_cfg2 { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-B cfg2"; -+ }; -+ video_b_des_cfg1 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-B cfg1"; -+ }; -+ video_b_des_cfg0 { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-B cfg0"; -+ }; -+ video_b_pwr_shdn { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR_SHDN"; -+ }; -+ video_b_cam_pwr0 { -+ gpio-hog; -+ gpios = <8 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR0"; -+ }; -+ video_b_cam_pwr1 { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR1"; -+ }; -+ video_b_cam_pwr3 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR3"; -+ }; -+ }; -+ }; -+ -+ i2c@7 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <7>; -+ /* Slot A (CN10) */ -+ -+ video_a_ext0: pca9535@26 { -+ compatible = "nxp,pca9535"; -+ reg = <0x26>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_a_des_cfg1 { -+ gpio-hog; -+ gpios = <5 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A cfg1"; -+ }; -+ video_a_des_cfg0 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A cfg0"; -+ }; -+ video_a_pwr_shdn { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR_SHDN"; -+ }; -+ video_a_cam_pwr0 { -+ gpio-hog; -+ gpios = <12 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR0"; -+ }; -+ video_a_cam_pwr1 { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR1"; -+ }; -+ video_a_cam_pwr2 { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR2"; -+ }; -+ video_a_cam_pwr3 { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR3"; -+ }; -+ video_a_des_shdn { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A DES_SHDN"; -+ }; -+ video_a_des_led { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-A led"; -+ }; -+ }; -+ -+ video_a_ext1: max7325@5c { -+ compatible = "maxim,max7325"; -+ reg = <0x5c>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_a_des_cfg2 { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-A cfg2"; -+ }; -+ video_a_des_cfg1 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-A cfg1"; -+ }; -+ video_a_des_cfg0 { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-A cfg0"; -+ }; -+ video_a_pwr_shdn { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR_SHDN"; -+ }; -+ video_a_cam_pwr0 { -+ gpio-hog; -+ gpios = <8 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR0"; -+ }; -+ video_a_cam_pwr1 { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR1"; -+ }; -+ video_a_cam_pwr3 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR3"; -+ }; -+ }; -+ }; -+ }; -+}; -+ -+&pcie_bus_clk { -+ clock-frequency = <100000000>; -+ status = "okay"; -+}; -+ -+&pciec0 { -+ status = "okay"; -+}; -+ -+&pciec1 { -+ status = "okay"; -+}; -+ -+&vin0 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin0ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ }; -+ port@1 { -+ csi0ep0: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin0_max9286_des0ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep0>; -+ }; -+ vin0_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; -+ }; -+ vin0_ti954_des0ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep0>; -+ }; -+ }; -+ }; -+}; -+ -+&vin1 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin1ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <1>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ }; -+ port@1 { -+ csi0ep1: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin1_max9286_des0ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep1>; -+ }; -+ vin1_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; -+ }; -+ vin1_ti954_des0ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep1>; -+ }; -+ }; -+ }; -+}; -+ -+&vin2 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin2ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <2>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ }; -+ port@1 { -+ csi0ep2: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin2_max9286_des0ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep2>; -+ }; -+ vin2_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; -+ }; -+ }; -+ }; -+}; -+ -+&vin3 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin3ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <3>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ csi0ep3: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin3_max9286_des0ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep3>; -+ }; -+ vin3_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; -+ }; -+ }; -+ }; -+}; -+ -+&vin4 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin4ep0: endpoint { -+ csi,select = "csi41"; -+ virtual,channel = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep0: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin4_max9286_des1ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep0>; -+ }; -+ vin4_ti964_des1ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep0>; -+ }; -+ vin4_ti954_des1ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep0>; -+ }; -+ }; -+ }; -+}; -+ -+&vin5 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin5ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <1>; -+ remote-endpoint = <&ov106xx_in5>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep1: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin5_max9286_des1ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep1>; -+ }; -+ vin5_ti964_des1ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep1>; -+ }; -+ vin5_ti954_des1ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep1>; -+ }; -+ }; -+ }; -+}; -+ -+&vin6 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin6ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <2>; -+ remote-endpoint = <&ov106xx_in6>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep2: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin6_max9286_des1ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep2>; -+ }; -+ vin6_ti964_des1ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep2>; -+ }; -+ }; -+ }; -+}; -+ -+&vin7 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin7ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <3>; -+ remote-endpoint = <&ov106xx_in7>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep3: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin7_max9286_des1ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep3>; -+ }; -+ vin7_ti964_des1ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep3>; -+ }; -+ }; -+ }; -+}; -+ -+&csi2_40 { -+ status = "okay"; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "ycbcr422"; -+ receive,vc = <0>; -+ }; -+ csi2_vc1 { -+ data,type = "ycbcr422"; -+ receive,vc = <1>; -+ }; -+ csi2_vc2 { -+ data,type = "ycbcr422"; -+ receive,vc = <2>; -+ }; -+ csi2_vc3 { -+ data,type = "ycbcr422"; -+ receive,vc = <3>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_40_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ csi-rate = <300>; -+ }; -+ }; -+}; -+ -+&csi2_41 { -+ status = "okay"; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "ycbcr422"; -+ receive,vc = <0>; -+ }; -+ csi2_vc1 { -+ data,type = "ycbcr422"; -+ receive,vc = <1>; -+ }; -+ csi2_vc2 { -+ data,type = "ycbcr422"; -+ receive,vc = <2>; -+ }; -+ csi2_vc3 { -+ data,type = "ycbcr422"; -+ receive,vc = <3>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_41_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ csi-rate = <300>; -+ }; -+ }; -+}; -+ -+&rcar_sound { -+ pinctrl-0 = <&sound_clk_pins>; -+ -+ /* Multi DAI */ -+ #sound-dai-cells = <1>; -+ -+ rcar_sound,dai { -+ dai0 { -+ playback = <&ssi7>; -+ capture = <&ssi8>; -+ }; -+ -+ dai1 { -+ playback = <&ssi0 &src0 &dvc0>; -+ capture = <&ssi1 &src1 &dvc1>; -+ }; -+ -+ dai2 { -+ capture = <&ssi6>; -+ }; -+ }; -+}; -+ -+&sdhi3 { -+ pinctrl-0 = <&sdhi3_pins_3v3>; -+ pinctrl-names = "default"; -+ -+ vmmc-supply = <&wlan_en>; -+ vqmmc-supply = <&vccq_sdhi3>; -+ keep-power-in-suspend; -+ enable-sdio-wakeup; -+ bus-width = <4>; -+ no-1-8-v; -+ non-removable; -+ cap-power-off-card; -+ max-frequency = <26000000>; -+ status = "okay"; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ wlcore: wlcore@2 { -+ compatible = "ti,wl1837"; -+ reg = <2>; -+ interrupt-parent = <&gpio1>; -+ interrupts = <25 IRQ_TYPE_EDGE_RISING>; -+ }; -+}; -+ -+&usb2_phy0 { -+ pinctrl-0 = <&usb0_pins>; -+ pinctrl-names = "default"; -+ -+ status = "okay"; -+}; -+ -+&ehci0 { -+ status = "okay"; -+}; -+ -+&ohci0 { -+ status = "okay"; -+}; -+ -+&xhci0 { -+ status = "okay"; -+}; -+ -+&msiof1 { -+ status = "disabled"; -+}; -+ -+&can0 { -+ pinctrl-0 = <&can0_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ -+ renesas,can-clock-select = <0x0>; -+}; -+ -+&can1 { -+ pinctrl-0 = <&can1_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ -+ renesas,can-clock-select = <0x0>; -+}; -+ -+&canfd { -+ pinctrl-0 = <&canfd0_pins &canfd1_pins>; -+ pinctrl-names = "default"; -+ status = "disabled"; -+ -+ channel0 { -+ status = "okay"; -+ }; -+ -+ channel1 { -+ status = "okay"; -+ }; -+}; -+ -+/* uncomment to enable CN48 on VIN4 */ -+//#include "ulcb-kf-rpi.dtsi" -+/* uncomment to enable CN47: SD on SDHI3 */ -+//#include "ulcb-kf-sd3.dtsi" --- -1.9.1 - diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0042-arm64-dts-r8a7795-h3ulcb-vb-add-ADAS-board.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0042-arm64-dts-r8a7795-h3ulcb-vb-add-ADAS-board.patch deleted file mode 100644 index c2099f9..0000000 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0042-arm64-dts-r8a7795-h3ulcb-vb-add-ADAS-board.patch +++ /dev/null @@ -1,4140 +0,0 @@ -From b7d0e4d918d57ed3c015558a11c3aa8487b7e729 Mon Sep 17 00:00:00 2001 -From: Vladimir Barinov <vladimir.barinov@cogentembedded.com> -Date: Thu, 13 Jul 2017 06:17:32 +0300 -Subject: [PATCH] arm64: dts: r8a7795-h3ulcb-vb: add ADAS board - -Videobox board on R8A7795 SoC - -Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> ---- - arch/arm64/boot/dts/renesas/Makefile | 1 + - .../boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts | 1787 ++++++++++++++++++++ - arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts | 1787 ++++++++++++++++++++ - arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi | 507 ++++++ - 4 files changed, 4082 insertions(+) - create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts - create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts - create mode 100644 arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi - -diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile -index 86a08db..c9b3e96 100644 ---- a/arch/arm64/boot/dts/renesas/Makefile -+++ b/arch/arm64/boot/dts/renesas/Makefile -@@ -16,6 +16,7 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x-view.dtb - dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-view.dtb - dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-had-alfa.dtb r8a7795-h3ulcb-had-beta.dtb - dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb r8a7795-h3ulcb-kf-v1.dtb -+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-vb.dtb r8a7795-es1-h3ulcb-vb.dtb - - always := $(dtb-y) - clean-files := *.dtb -diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts -new file mode 100644 -index 0000000..77ad679 ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts -@@ -0,0 +1,1787 @@ -+/* -+ * Device Tree Source for the H3ULCB Videobox board on r8a7795 ES1.x -+ * -+ * Copyright (C) 2017 Renesas Electronics Corp. -+ * Copyright (C) 2017 Cogent Embedded, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+#include "r8a7795-es1-h3ulcb.dts" -+ -+/ { -+ model = "Renesas H3ULCB Videobox board based on r8a7795"; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ led5 { -+ gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; -+ }; -+ led6 { -+ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; -+ }; -+ /* D13 - status 0 */ -+ led_ext00 { -+ gpios = <&gpio_ext_led 0 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "heartbeat"; -+ }; -+ /* D14 - status 1 */ -+ led_ext01 { -+ gpios = <&gpio_ext_led 1 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "mmc1"; -+ }; -+ /* D16 - HDMI1 */ -+ led_ext02 { -+ gpios = <&gpio_ext_led 2 GPIO_ACTIVE_LOW>; -+ }; -+ /* D18 - HDMI0 */ -+ led_ext03 { -+ gpios = <&gpio_ext_led 3 GPIO_ACTIVE_LOW>; -+ }; -+ /* D20 - USB3.0 - 0.1 */ -+ led_ext04 { -+ gpios = <&gpio_ext_led 4 GPIO_ACTIVE_LOW>; -+ }; -+ /* D21 - USB3.0 - 0.2 */ -+ led_ext05 { -+ gpios = <&gpio_ext_led 5 GPIO_ACTIVE_LOW>; -+ }; -+ /* D24 - USB3.0 - 1.1 */ -+ led6_ext06 { -+ gpios = <&gpio_ext_led 6 GPIO_ACTIVE_LOW>; -+ }; -+ /* D25 - USB3.0 - 1.2 */ -+ led_ext07 { -+ gpios = <&gpio_ext_led 7 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ snd_clk: snd_clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <24576000>; -+ clock-output-names = "scki"; -+ }; -+ -+ vccq_sdhi3: regulator@5 { -+ compatible = "regulator-fixed"; -+ -+ regulator-name = "SDHI3 VccQ"; -+ /* external voltage translator to 1.8V */ -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ }; -+ -+ fpdlink_switch: regulator@8 { -+ compatible = "regulator-fixed"; -+ regulator-name = "fpdlink_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio1 20 0>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ -+ hub_reset: regulator@9 { -+ compatible = "regulator-fixed"; -+ regulator-name = "hub_reset"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio5 5 0>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ -+ hub_power: regulator@10 { -+ compatible = "regulator-fixed"; -+ regulator-name = "hub_power"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ gpio = <&gpio6 28 0>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ -+ /delete-node/sound; -+ -+ rsnd_ak4613: sound@0 { -+ pinctrl-0 = <&sound_0_pins>; -+ pinctrl-names = "default"; -+ compatible = "simple-audio-card"; -+ -+ simple-audio-card,format = "left_j"; -+ simple-audio-card,name = "ak4613"; -+ -+ simple-audio-card,bitclock-master = <&sndcpu>; -+ simple-audio-card,frame-master = <&sndcpu>; -+ -+ sndcpu: simple-audio-card,cpu@1 { -+ sound-dai = <&rcar_sound>; -+ }; -+ -+ sndcodec: simple-audio-card,codec@1 { -+ sound-dai = <&ak4613>; -+ }; -+ }; -+ -+ lvds-encoder { -+ compatible = "thine,thc63lvdm83d"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ port@0 { -+ reg = <0>; -+ lvds_enc_in: endpoint { -+ remote-endpoint = <&du_out_lvds0>; -+ }; -+ }; -+ port@1 { -+ reg = <1>; -+ lvds_enc_out: endpoint { -+ remote-endpoint = <&lvds_in>; -+ }; -+ }; -+ }; -+ }; -+ -+ lvds { -+ compatible = "lvds-connector"; -+ -+ width-mm = <210>; -+ height-mm = <158>; -+ -+ panel-timing { -+ /* 1280x800 @60Hz */ -+ clock-frequency = <65000000>; -+ hactive = <1280>; -+ vactive = <800>; -+ hsync-len = <40>; -+ hfront-porch = <80>; -+ hback-porch = <40>; -+ vfront-porch = <14>; -+ vback-porch = <14>; -+ vsync-len = <4>; -+ }; -+ -+ port { -+ lvds_in: endpoint { -+ remote-endpoint = <&lvds_enc_out>; -+ }; -+ }; -+ }; -+ -+ hdmi1-out { -+ compatible = "hdmi-connector"; -+ type = "a"; -+ -+ port { -+ hdmi1_con: endpoint { -+ remote-endpoint = <&rcar_dw_hdmi1_out>; -+ }; -+ }; -+ }; -+ -+ excan_ref_clk: excan-ref-clock { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <16000000>; -+ }; -+ -+ radio: si468x@0 { -+ compatible = "si,si468x-pcm"; -+ status = "okay"; -+ -+ #sound-dai-cells = <0>; -+ }; -+ -+ spi_gpio_sw { -+ compatible = "spi-gpio"; -+ #address-cells = <0x1>; -+ #size-cells = <0x0>; -+ gpio-sck = <&gpio0 8 GPIO_ACTIVE_HIGH>; -+ gpio-miso = <&gpio0 10 GPIO_ACTIVE_HIGH>; -+ gpio-mosi = <&gpio0 11 GPIO_ACTIVE_HIGH>; -+ cs-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; -+ num-chipselects = <1>; -+ -+ spidev: spidev@0 { -+ compatible = "spidev", "spi-gpio"; -+ reg = <0>; -+ spi-max-frequency = <25000000>; -+ spi-cpha; -+ spi-cpol; -+ }; -+ }; -+ -+ spi_gpio_can { -+ compatible = "spi-gpio"; -+ #address-cells = <0x1>; -+ #size-cells = <0x0>; -+ gpio-sck = <&gpio1 2 GPIO_ACTIVE_HIGH>; -+ gpio-miso = <&gpio1 3 GPIO_ACTIVE_HIGH>; -+ gpio-mosi = <&gpio1 1 GPIO_ACTIVE_HIGH>; -+ cs-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH -+ &gpio1 4 GPIO_ACTIVE_HIGH>; -+ num-chipselects = <2>; -+ -+ spican0: spidev@0 { -+ compatible = "microchip,mcp2515"; -+ reg = <0>; -+ clocks = <&excan_ref_clk>; -+ interrupt-parent = <&gpio0>; -+ interrupts = <15 GPIO_ACTIVE_LOW>; -+ spi-max-frequency = <10000000>; -+ }; -+ spican1: spidev@1 { -+ compatible = "microchip,mcp2515"; -+ reg = <1>; -+ clocks = <&excan_ref_clk>; -+ interrupt-parent = <&gpio1>; -+ interrupts = <5 GPIO_ACTIVE_LOW>; -+ spi-max-frequency = <10000000>; -+ }; -+ }; -+}; -+ -+&du { -+ ports { -+ port@1 { -+ endpoint { -+ remote-endpoint = <&rcar_dw_hdmi0_in>; -+ }; -+ }; -+ port@2 { -+ endpoint { -+ remote-endpoint = <&rcar_dw_hdmi1_in>; -+ }; -+ }; -+ port@3 { -+ endpoint { -+ remote-endpoint = <&lvds_enc_in>; -+ }; -+ }; -+ }; -+}; -+ -+&hdmi1 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ port@0 { -+ reg = <0>; -+ rcar_dw_hdmi1_in: endpoint { -+ remote-endpoint = <&du_out_hdmi1>; -+ }; -+ }; -+ port@1 { -+ reg = <1>; -+ rcar_dw_hdmi1_out: endpoint { -+ remote-endpoint = <&hdmi1_con>; -+ }; -+ }; -+ }; -+}; -+ -+&pfc { -+ hscif4_pins: hscif4 { -+ groups = "hscif4_data_a", "hscif4_ctrl"; -+ function = "hscif4"; -+ }; -+ -+ sdhi3_pins_3v3: sd3_3v3 { -+ groups = "sdhi3_data4", "sdhi3_ctrl"; -+ function = "sdhi3"; -+ power-source = <3300>; -+ }; -+ -+ /delete-node/sound; -+ -+ sound_0_pins: sound1 { -+ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; -+ function = "ssi"; -+ }; -+ -+ usb0_pins: usb0 { -+ groups = "usb0"; -+ function = "usb0"; -+ }; -+ -+ can0_pins: can0 { -+ groups = "can0_data_a"; -+ function = "can0"; -+ }; -+ -+ can1_pins: can1 { -+ groups = "can1_data"; -+ function = "can1"; -+ }; -+ -+ canfd0_pins: canfd0 { -+ groups = "canfd0_data_a"; -+ function = "canfd0"; -+ }; -+ -+ canfd1_pins: canfd1 { -+ groups = "canfd1_data"; -+ function = "canfd1"; -+ }; -+}; -+ -+&gpio0 { -+ video_a_irq { -+ gpio-hog; -+ gpios = <12 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-A irq"; -+ }; -+ -+ video_b_irq { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-B irq"; -+ }; -+ -+ video_c_irq { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-C irq"; -+ }; -+}; -+ -+&gpio1 { -+ gpioext_4_22_irq { -+ gpio-hog; -+ gpios = <25 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "0x22@i2c4 irq"; -+ }; -+ pcie_disable { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "mPCIe W_DISABLE"; -+ }; -+ m2_sleep { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "M.2 SLEEP#"; -+ }; -+ m2_pres { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "M.2 Present"; -+ }; -+ m2_pcie_det { -+ gpio-hog; -+ gpios = <18 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "M.2 PCIe detected"; -+ }; -+ m2_usb_det { -+ gpio-hog; -+ gpios = <19 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "M.2 USB30 detected"; -+ }; -+ m2_usb_det { -+ gpio-hog; -+ gpios = <27 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "M.2 SSD detected"; -+ }; -+ eth_phy_reset { -+ gpio-hog; -+ gpios = <16 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "BR phy reset"; -+ }; -+ eth_sw_reset { -+ gpio-hog; -+ gpios = <17 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "BR switch reset"; -+ }; -+}; -+ -+&gpio2 { -+ m2_wake { -+ gpio-hog; -+ gpios = <1 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "M.2 WAKE#"; -+ }; -+ m2_pcie_en { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "M.2 PCIe enable"; -+ }; -+}; -+ -+&gpio3 { -+ m2_power_off { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "M.2 FULL_CARD_POWER_OFF#"; -+ }; -+}; -+ -+&gpio6 { -+ pcie_wake { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "mPCIe WAKE#"; -+ }; -+ pcie_clkreq { -+ gpio-hog; -+ gpios = <10 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "mPCIe CLKREQ#"; -+ }; -+ m2_rst { -+ gpio-hog; -+ gpios = <21 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "M.2 RESET#"; -+ }; -+}; -+ -+&hscif4 { -+ pinctrl-0 = <&hscif4_pins>; -+ pinctrl-names = "default"; -+ ctsrts; -+ -+ status = "okay"; -+}; -+ -+&i2c2 { -+ clock-frequency = <400000>; -+ -+ i2cswitch2: pca9548@74 { -+ compatible = "nxp,pca9548"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x74>; -+ reset-gpios = <&gpio6 5 GPIO_ACTIVE_LOW>; -+ -+ i2c@0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0>; -+ /* USB3.0 HUB node(s) */ -+ }; -+ -+ i2c@6 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <6>; -+ /* PCIe node(s) */ -+ }; -+ -+ i2c@7 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <7>; -+ /* Slot A (CN10) */ -+ -+ ov106xx@0 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x60>; -+ -+ port@0 { -+ ov106xx_in0: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin0ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep0>; -+ }; -+ ov106xx_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; -+ }; -+ ov106xx_ti954_des0ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep0>; -+ }; -+ }; -+ }; -+ -+ ov106xx@1 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x61>; -+ -+ port@0 { -+ ov106xx_in1: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin1ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep1>; -+ }; -+ ov106xx_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; -+ }; -+ ov106xx_ti954_des0ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep1>; -+ }; -+ }; -+ }; -+ -+ ov106xx@2 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x62>; -+ -+ port@0 { -+ ov106xx_in2: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin2ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep2>; -+ }; -+ ov106xx_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; -+ }; -+ }; -+ }; -+ -+ ov106xx@3 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x63>; -+ -+ port@0 { -+ ov106xx_in3: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin3ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep3>; -+ }; -+ ov106xx_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB964 @ 0x3a */ -+ ti964-ti9x3@0 { -+ compatible = "ti,ti964-ti9x3"; -+ reg = <0x3a>; -+ ti,sensor_delay = <350>; -+ ti,links = <4>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "stp"; -+ -+ port@0 { -+ ti964_des0ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ ti964_des0ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ ti964_des0ep2: endpoint@2 { -+ ti9x3-addr = <0x0e>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ ti964_des0ep3: endpoint@3 { -+ ti9x3-addr = <0x0f>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ ti964_csi0ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB954 @ 0x38 */ -+ ti954-ti9x3@0 { -+ compatible = "ti,ti954-ti9x3"; -+ reg = <0x38>; -+ /* gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; */ -+ ti,sensor_delay = <350>; -+ ti,links = <2>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "stp"; -+ -+ port@0 { -+ ti954_des0ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ ti954_des0ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ }; -+ port@1 { -+ ti954_csi0ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ -+ /* MAX9286 @ 0x2c */ -+ max9286-max9271@0 { -+ compatible = "maxim,max9286-max9271"; -+ reg = <0x2c>; -+ maxim,sensor_delay = <350>; -+ maxim,links = <4>; -+ maxim,lanes = <4>; -+ maxim,resetb-gpio = <1>; -+ maxim,fsync-mode = "automatic"; -+ maxim,timeout = <100>; -+ -+ port@0 { -+ max9286_des0ep0: endpoint@0 { -+ max9271-addr = <0x50>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ max9286_des0ep1: endpoint@1 { -+ max9271-addr = <0x51>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ max9286_des0ep2: endpoint@2 { -+ max9271-addr = <0x52>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ max9286_des0ep3: endpoint@3 { -+ max9271-addr = <0x53>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ max9286_csi0ep0: endpoint { -+ csi-rate = <700>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ }; -+ -+ i2c@2 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <2>; -+ /* Slot B (CN11) */ -+ -+ ov106xx@4 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x64>; -+ -+ port@0 { -+ ov106xx_in4: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin4ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep0>; -+ }; -+ ov106xx_ti964_des1ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep0>; -+ }; -+ ov106xx_ti954_des1ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep0>; -+ }; -+ }; -+ }; -+ -+ ov106xx@5 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x65>; -+ -+ port@0 { -+ ov106xx_in5: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin5ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep1>; -+ }; -+ ov106xx_ti964_des1ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep1>; -+ }; -+ ov106xx_ti954_des1ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep1>; -+ }; -+ }; -+ }; -+ -+ ov106xx@6 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x66>; -+ -+ port@0 { -+ ov106xx_in6: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin6ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep2>; -+ }; -+ ov106xx_ti964_des1ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep2>; -+ }; -+ }; -+ }; -+ -+ ov106xx@7 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x67>; -+ -+ port@0 { -+ ov106xx_in7: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin7ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep3>; -+ }; -+ ov106xx_ti964_des1ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep3>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB964 @ 0x3a */ -+ ti964-ti9x3@1 { -+ compatible = "ti,ti964-ti9x3"; -+ reg = <0x3a>; -+ ti,sensor_delay = <350>; -+ ti,links = <4>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "stp"; -+ -+ port@0 { -+ ti964_des1ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ ti964_des1ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ ti964_des1ep2: endpoint@2 { -+ ti9x3-addr = <0x0e>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in6>; -+ }; -+ ti964_des1ep3: endpoint@3 { -+ ti9x3-addr = <0x0f>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in7>; -+ }; -+ }; -+ port@1 { -+ ti964_csi2ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB954 @ 0x38 */ -+ ti954-ti9x3@1 { -+ compatible = "ti,ti954-ti9x3"; -+ reg = <0x38>; -+ /* gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>; */ -+ ti,sensor_delay = <350>; -+ ti,links = <2>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "stp"; -+ -+ port@0 { -+ ti954_des1ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ ti954_des1ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ }; -+ port@1 { -+ ti954_csi2ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+ -+ /* MAX9286 @ 0x2c */ -+ max9286-max9271@1 { -+ compatible = "maxim,max9286-max9271"; -+ reg = <0x2c>; -+ maxim,sensor_delay = <350>; -+ maxim,links = <4>; -+ maxim,lanes = <4>; -+ maxim,resetb-gpio = <1>; -+ maxim,fsync-mode = "automatic"; -+ maxim,timeout = <100>; -+ -+ port@0 { -+ max9286_des1ep0: endpoint@0 { -+ max9271-addr = <0x50>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ max9286_des1ep1: endpoint@1 { -+ max9271-addr = <0x51>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ max9286_des1ep2: endpoint@2 { -+ max9271-addr = <0x52>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in6>; -+ }; -+ max9286_des1ep3: endpoint@3 { -+ max9271-addr = <0x53>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in7>; -+ }; -+ }; -+ port@1 { -+ max9286_csi2ep0: endpoint { -+ csi-rate = <700>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+ }; -+ -+ i2c@3 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <3>; -+ /* Slot C (CN12) */ -+ }; -+ -+ i2c@1 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <1>; -+ /* Slot A (CN10) */ -+ -+ video_a_ext0: pca9535@26 { -+ compatible = "nxp,pca9535"; -+ reg = <0x26>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_a_des_cfg1 { -+ gpio-hog; -+ gpios = <5 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-A cfg1"; -+ }; -+ video_a_des_cfg0 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-A cfg0"; -+ }; -+ video_a_pwr_shdn { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR_SHDN"; -+ }; -+ video_a_cam_pwr0 { -+ gpio-hog; -+ gpios = <12 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR0"; -+ }; -+ video_a_cam_pwr1 { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR1"; -+ }; -+ video_a_cam_pwr2 { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR2"; -+ }; -+ video_a_cam_pwr3 { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR3"; -+ }; -+ video_a_des_shdn { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A DES_SHDN"; -+ }; -+ video_a_des_led { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-A led"; -+ }; -+ }; -+ -+ video_a_ext1: max7325@5c { -+ compatible = "maxim,max7325"; -+ reg = <0x5c>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_a_des_cfg2 { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-A cfg2"; -+ }; -+ video_a_des_cfg1 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-A cfg1"; -+ }; -+ video_a_des_cfg0 { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-A cfg0"; -+ }; -+ video_a_pwr_shdn { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR_SHDN"; -+ }; -+ video_a_cam_pwr0 { -+ gpio-hog; -+ gpios = <8 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR0"; -+ }; -+ video_a_cam_pwr1 { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR1"; -+ }; -+ video_a_cam_pwr2 { -+ gpio-hog; -+ gpios = <10 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR2"; -+ }; -+ video_a_cam_pwr3 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR3"; -+ }; -+ video_a_des_shdn { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A DES_SHDN"; -+ }; -+ video_a_led { -+ gpio-hog; -+ gpios = <12 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-A LED"; -+ }; -+ }; -+ }; -+ -+ i2c@5 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <5>; -+ /* Slot B (CN11) */ -+ -+ video_b_ext0: pca9535@26 { -+ compatible = "nxp,pca9535"; -+ reg = <0x26>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_b_des_cfg1 { -+ gpio-hog; -+ gpios = <5 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-B cfg1"; -+ }; -+ video_b_des_cfg0 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-B cfg0"; -+ }; -+ video_b_pwr_shdn { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR_SHDN"; -+ }; -+ video_b_cam_pwr0 { -+ gpio-hog; -+ gpios = <12 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR0"; -+ }; -+ video_b_cam_pwr1 { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR1"; -+ }; -+ video_b_cam_pwr2 { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR2"; -+ }; -+ video_b_cam_pwr3 { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR3"; -+ }; -+ video_b_des_shdn { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B DES_SHDN"; -+ }; -+ video_b_des_led { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-B led"; -+ }; -+ }; -+ -+ video_b_ext1: max7325@5c { -+ compatible = "maxim,max7325"; -+ reg = <0x5c>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_b_des_cfg2 { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-B cfg2"; -+ }; -+ video_b_des_cfg1 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-B cfg1"; -+ }; -+ video_b_des_cfg0 { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-B cfg0"; -+ }; -+ video_b_pwr_shdn { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR_SHDN"; -+ }; -+ video_b_cam_pwr0 { -+ gpio-hog; -+ gpios = <8 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR0"; -+ }; -+ video_b_cam_pwr1 { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR1"; -+ }; -+ video_b_cam_pwr2 { -+ gpio-hog; -+ gpios = <10 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR2"; -+ }; -+ video_b_cam_pwr3 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR3"; -+ }; -+ video_b_des_shdn { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B DES_SHDN"; -+ }; -+ video_b_led { -+ gpio-hog; -+ gpios = <12 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-B LED"; -+ }; -+ }; -+ }; -+ -+ i2c@4 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <4>; -+ /* Slot C (CN12) */ -+ }; -+ }; -+}; -+ -+&i2c4 { -+ i2cswitch4: pca9548@74 { -+ compatible = "nxp,pca9548"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x74>; -+ reset-gpios= <&gpio5 15 GPIO_ACTIVE_LOW>; -+ -+ i2c@0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0>; -+ /* FAN node - EMC2103 */ -+ fan_ctrl:ecm2103@2e { -+ compatible = "emc2103"; -+ reg = <0x2e>; -+ }; -+ }; -+ -+ i2c@1 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <1>; -+ /* Power nodes - 2 x TPS544x20 */ -+ }; -+ -+ i2c@2 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <2>; -+ /* CAN and power board nodes */ -+ -+ gpio_ext_pwr: pca9535@22 { -+ compatible = "nxp,pca9535"; -+ reg = <0x22>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio1>; -+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>; -+ -+ /* enable input DCDC after wake-up signal released */ -+ pwr_hold { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "pwr_hold"; -+ }; -+ -+ /* CAN0 */ -+ can0_stby { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can0_stby"; -+ }; -+ can0_load { -+ gpio-hog; -+ gpios = <0 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can0_120R_load"; -+ }; -+ /* CAN1 */ -+ can1_stby { -+ gpio-hog; -+ gpios = <5 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can1_stby"; -+ }; -+ can1_load { -+ gpio-hog; -+ gpios = <1 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can1_120R_load"; -+ }; -+ /* CAN2 */ -+ can2_stby { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can2_stby"; -+ }; -+ can2_load { -+ gpio-hog; -+ gpios = <2 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can2_120R_load"; -+ }; -+ can2_rst { -+ gpio-hog; -+ gpios = <8 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "can2_rst"; -+ }; -+ /* CAN3 */ -+ can3_stby { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can3_stby"; -+ }; -+ can3_load { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can3_120R_load"; -+ }; -+ can3_rst { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "can3_rst"; -+ }; -+ }; -+ }; -+ -+ i2c@3 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <3>; -+ /* FPDLink output node - DS90UH947 */ -+ }; -+ -+ i2c@4 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <4>; -+ /* BCM switch node */ -+ }; -+ -+ i2c@5 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <5>; -+ /* LED board node(s) */ -+ -+ gpio_ext_led: pca9535@22 { -+ compatible = "nxp,pca9535"; -+ reg = <0x22>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ /* gpios 0..7 are used for indication LEDs, low-active */ -+ }; -+ }; -+ -+ i2c@6 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <6>; -+ /* M2 connector i2c node(s) */ -+ }; -+ -+ /* port 7 is not used */ -+ }; -+}; -+ -+&pcie_bus_clk { -+ clock-frequency = <100000000>; -+ status = "okay"; -+}; -+ -+&pciec0 { -+ status = "okay"; -+}; -+ -+&pciec1 { -+ status = "okay"; -+}; -+ -+&vin0 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin0ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ }; -+ port@1 { -+ csi0ep0: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin0_max9286_des0ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep0>; -+ }; -+ vin0_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; -+ }; -+ vin0_ti954_des0ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep0>; -+ }; -+ }; -+ }; -+}; -+ -+&vin1 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin1ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <1>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ }; -+ port@1 { -+ csi0ep1: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin1_max9286_des0ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep1>; -+ }; -+ vin1_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; -+ }; -+ vin1_ti954_des0ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep1>; -+ }; -+ }; -+ }; -+}; -+ -+&vin2 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin2ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <2>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ }; -+ port@1 { -+ csi0ep2: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin2_max9286_des0ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep2>; -+ }; -+ vin2_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; -+ }; -+ }; -+ }; -+}; -+ -+&vin3 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin3ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <3>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ csi0ep3: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin3_max9286_des0ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep3>; -+ }; -+ vin3_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; -+ }; -+ }; -+ }; -+}; -+ -+&vin4 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin4ep0: endpoint { -+ csi,select = "csi41"; -+ virtual,channel = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep0: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin4_max9286_des1ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep0>; -+ }; -+ vin4_ti964_des1ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep0>; -+ }; -+ vin4_ti954_des1ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep0>; -+ }; -+ }; -+ }; -+}; -+ -+&vin5 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin5ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <1>; -+ remote-endpoint = <&ov106xx_in5>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep1: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin5_max9286_des1ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep1>; -+ }; -+ vin5_ti964_des1ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep1>; -+ }; -+ vin5_ti954_des1ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep1>; -+ }; -+ }; -+ }; -+}; -+ -+&vin6 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin6ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <2>; -+ remote-endpoint = <&ov106xx_in6>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep2: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin6_max9286_des1ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep2>; -+ }; -+ vin6_ti964_des1ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep2>; -+ }; -+ }; -+ }; -+}; -+ -+&vin7 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin7ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <3>; -+ remote-endpoint = <&ov106xx_in7>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep3: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin7_max9286_des1ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep3>; -+ }; -+ vin7_ti964_des1ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep3>; -+ }; -+ }; -+ }; -+}; -+ -+&csi2_40 { -+ status = "okay"; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "ycbcr422"; -+ receive,vc = <0>; -+ }; -+ csi2_vc1 { -+ data,type = "ycbcr422"; -+ receive,vc = <1>; -+ }; -+ csi2_vc2 { -+ data,type = "ycbcr422"; -+ receive,vc = <2>; -+ }; -+ csi2_vc3 { -+ data,type = "ycbcr422"; -+ receive,vc = <3>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_40_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ csi-rate = <300>; -+ }; -+ }; -+}; -+ -+&csi2_41 { -+ status = "okay"; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "ycbcr422"; -+ receive,vc = <0>; -+ }; -+ csi2_vc1 { -+ data,type = "ycbcr422"; -+ receive,vc = <1>; -+ }; -+ csi2_vc2 { -+ data,type = "ycbcr422"; -+ receive,vc = <2>; -+ }; -+ csi2_vc3 { -+ data,type = "ycbcr422"; -+ receive,vc = <3>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_41_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ csi-rate = <300>; -+ }; -+ }; -+}; -+ -+&rcar_sound { -+ pinctrl-0 = <&sound_clk_pins>; -+ -+ /* Multi DAI */ -+ #sound-dai-cells = <1>; -+}; -+ -+&sata { -+ status = "okay"; -+}; -+ -+&ssi1 { -+ /delete-property/shared-pin; -+}; -+ -+&avb { -+ /delete-property/phy-handle; -+ /delete-property/phy-gpios; -+ phy-mode = "rgmii"; -+ -+ /delete-node/ethernet-phy@0; -+ -+ fixed-link { -+ speed = <100>; -+ full-duplex; -+ }; -+}; -+ -+&msiof1 { -+ status = "disabled"; -+}; -+ -+&usb2_phy0 { -+ pinctrl-0 = <&usb0_pins>; -+ pinctrl-names = "default"; -+ -+ status = "okay"; -+}; -+ -+&xhci0 { -+ status = "okay"; -+}; -+ -+&hsusb { -+ status = "okay"; -+}; -+ -+&ehci0 { -+ status = "okay"; -+}; -+ -+&ohci0 { -+ status = "okay"; -+}; -+ -+&can0 { -+ pinctrl-0 = <&can0_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ -+ renesas,can-clock-select = <0x0>; -+}; -+ -+&can1 { -+ pinctrl-0 = <&can1_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ -+ renesas,can-clock-select = <0x0>; -+}; -+ -+&canfd { -+ pinctrl-0 = <&canfd0_pins &canfd1_pins>; -+ pinctrl-names = "default"; -+ status = "disabled"; -+ -+ renesas,can-clock-select = <0x0>; -+ -+ channel0 { -+ status = "okay"; -+ }; -+ -+ channel1 { -+ status = "okay"; -+ }; -+}; -+ -+/* uncomment to enable CN12 on VIN4-7 */ -+//#include "ulcb-vb-cn12.dtsi" -diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts -new file mode 100644 -index 0000000..1263637 ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts -@@ -0,0 +1,1787 @@ -+/* -+ * Device Tree Source for the H3ULCB Videobox board -+ * -+ * Copyright (C) 2017 Renesas Electronics Corp. -+ * Copyright (C) 2017 Cogent Embedded, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+#include "r8a7795-h3ulcb.dts" -+ -+/ { -+ model = "Renesas H3ULCB Videobox board based on r8a7795"; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ led5 { -+ gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; -+ }; -+ led6 { -+ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; -+ }; -+ /* D13 - status 0 */ -+ led_ext00 { -+ gpios = <&gpio_ext_led 0 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "heartbeat"; -+ }; -+ /* D14 - status 1 */ -+ led_ext01 { -+ gpios = <&gpio_ext_led 1 GPIO_ACTIVE_LOW>; -+ linux,default-trigger = "mmc1"; -+ }; -+ /* D16 - HDMI1 */ -+ led_ext02 { -+ gpios = <&gpio_ext_led 2 GPIO_ACTIVE_LOW>; -+ }; -+ /* D18 - HDMI0 */ -+ led_ext03 { -+ gpios = <&gpio_ext_led 3 GPIO_ACTIVE_LOW>; -+ }; -+ /* D20 - USB3.0 - 0.1 */ -+ led_ext04 { -+ gpios = <&gpio_ext_led 4 GPIO_ACTIVE_LOW>; -+ }; -+ /* D21 - USB3.0 - 0.2 */ -+ led_ext05 { -+ gpios = <&gpio_ext_led 5 GPIO_ACTIVE_LOW>; -+ }; -+ /* D24 - USB3.0 - 1.1 */ -+ led6_ext06 { -+ gpios = <&gpio_ext_led 6 GPIO_ACTIVE_LOW>; -+ }; -+ /* D25 - USB3.0 - 1.2 */ -+ led_ext07 { -+ gpios = <&gpio_ext_led 7 GPIO_ACTIVE_LOW>; -+ }; -+ }; -+ -+ snd_clk: snd_clk { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <24576000>; -+ clock-output-names = "scki"; -+ }; -+ -+ vccq_sdhi3: regulator@5 { -+ compatible = "regulator-fixed"; -+ -+ regulator-name = "SDHI3 VccQ"; -+ /* external voltage translator to 1.8V */ -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ }; -+ -+ fpdlink_switch: regulator@8 { -+ compatible = "regulator-fixed"; -+ regulator-name = "fpdlink_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio1 20 0>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ -+ hub_reset: regulator@9 { -+ compatible = "regulator-fixed"; -+ regulator-name = "hub_reset"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio5 5 0>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ -+ hub_power: regulator@10 { -+ compatible = "regulator-fixed"; -+ regulator-name = "hub_power"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ gpio = <&gpio6 28 0>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ -+ /delete-node/sound; -+ -+ rsnd_ak4613: sound@0 { -+ pinctrl-0 = <&sound_0_pins>; -+ pinctrl-names = "default"; -+ compatible = "simple-audio-card"; -+ -+ simple-audio-card,format = "left_j"; -+ simple-audio-card,name = "ak4613"; -+ -+ simple-audio-card,bitclock-master = <&sndcpu>; -+ simple-audio-card,frame-master = <&sndcpu>; -+ -+ sndcpu: simple-audio-card,cpu@1 { -+ sound-dai = <&rcar_sound>; -+ }; -+ -+ sndcodec: simple-audio-card,codec@1 { -+ sound-dai = <&ak4613>; -+ }; -+ }; -+ -+ lvds-encoder { -+ compatible = "thine,thc63lvdm83d"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ port@0 { -+ reg = <0>; -+ lvds_enc_in: endpoint { -+ remote-endpoint = <&du_out_lvds0>; -+ }; -+ }; -+ port@1 { -+ reg = <1>; -+ lvds_enc_out: endpoint { -+ remote-endpoint = <&lvds_in>; -+ }; -+ }; -+ }; -+ }; -+ -+ lvds { -+ compatible = "lvds-connector"; -+ -+ width-mm = <210>; -+ height-mm = <158>; -+ -+ panel-timing { -+ /* 1280x800 @60Hz */ -+ clock-frequency = <65000000>; -+ hactive = <1280>; -+ vactive = <800>; -+ hsync-len = <40>; -+ hfront-porch = <80>; -+ hback-porch = <40>; -+ vfront-porch = <14>; -+ vback-porch = <14>; -+ vsync-len = <4>; -+ }; -+ -+ port { -+ lvds_in: endpoint { -+ remote-endpoint = <&lvds_enc_out>; -+ }; -+ }; -+ }; -+ -+ hdmi1-out { -+ compatible = "hdmi-connector"; -+ type = "a"; -+ -+ port { -+ hdmi1_con: endpoint { -+ remote-endpoint = <&rcar_dw_hdmi1_out>; -+ }; -+ }; -+ }; -+ -+ excan_ref_clk: excan-ref-clock { -+ compatible = "fixed-clock"; -+ #clock-cells = <0>; -+ clock-frequency = <16000000>; -+ }; -+ -+ radio: si468x@0 { -+ compatible = "si,si468x-pcm"; -+ status = "okay"; -+ -+ #sound-dai-cells = <0>; -+ }; -+ -+ spi_gpio_sw { -+ compatible = "spi-gpio"; -+ #address-cells = <0x1>; -+ #size-cells = <0x0>; -+ gpio-sck = <&gpio0 8 GPIO_ACTIVE_HIGH>; -+ gpio-miso = <&gpio0 10 GPIO_ACTIVE_HIGH>; -+ gpio-mosi = <&gpio0 11 GPIO_ACTIVE_HIGH>; -+ cs-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; -+ num-chipselects = <1>; -+ -+ spidev: spidev@0 { -+ compatible = "spidev", "spi-gpio"; -+ reg = <0>; -+ spi-max-frequency = <25000000>; -+ spi-cpha; -+ spi-cpol; -+ }; -+ }; -+ -+ spi_gpio_can { -+ compatible = "spi-gpio"; -+ #address-cells = <0x1>; -+ #size-cells = <0x0>; -+ gpio-sck = <&gpio1 2 GPIO_ACTIVE_HIGH>; -+ gpio-miso = <&gpio1 3 GPIO_ACTIVE_HIGH>; -+ gpio-mosi = <&gpio1 1 GPIO_ACTIVE_HIGH>; -+ cs-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH -+ &gpio1 4 GPIO_ACTIVE_HIGH>; -+ num-chipselects = <2>; -+ -+ spican0: spidev@0 { -+ compatible = "microchip,mcp2515"; -+ reg = <0>; -+ clocks = <&excan_ref_clk>; -+ interrupt-parent = <&gpio0>; -+ interrupts = <15 GPIO_ACTIVE_LOW>; -+ spi-max-frequency = <10000000>; -+ }; -+ spican1: spidev@1 { -+ compatible = "microchip,mcp2515"; -+ reg = <1>; -+ clocks = <&excan_ref_clk>; -+ interrupt-parent = <&gpio1>; -+ interrupts = <5 GPIO_ACTIVE_LOW>; -+ spi-max-frequency = <10000000>; -+ }; -+ }; -+}; -+ -+&du { -+ ports { -+ port@1 { -+ endpoint { -+ remote-endpoint = <&rcar_dw_hdmi0_in>; -+ }; -+ }; -+ port@2 { -+ endpoint { -+ remote-endpoint = <&rcar_dw_hdmi1_in>; -+ }; -+ }; -+ port@3 { -+ endpoint { -+ remote-endpoint = <&lvds_enc_in>; -+ }; -+ }; -+ }; -+}; -+ -+&hdmi1 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ port@0 { -+ reg = <0>; -+ rcar_dw_hdmi1_in: endpoint { -+ remote-endpoint = <&du_out_hdmi1>; -+ }; -+ }; -+ port@1 { -+ reg = <1>; -+ rcar_dw_hdmi1_out: endpoint { -+ remote-endpoint = <&hdmi1_con>; -+ }; -+ }; -+ }; -+}; -+ -+&pfc { -+ hscif4_pins: hscif4 { -+ groups = "hscif4_data_a", "hscif4_ctrl"; -+ function = "hscif4"; -+ }; -+ -+ sdhi3_pins_3v3: sd3_3v3 { -+ groups = "sdhi3_data4", "sdhi3_ctrl"; -+ function = "sdhi3"; -+ power-source = <3300>; -+ }; -+ -+ /delete-node/sound; -+ -+ sound_0_pins: sound1 { -+ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; -+ function = "ssi"; -+ }; -+ -+ usb0_pins: usb0 { -+ groups = "usb0"; -+ function = "usb0"; -+ }; -+ -+ can0_pins: can0 { -+ groups = "can0_data_a"; -+ function = "can0"; -+ }; -+ -+ can1_pins: can1 { -+ groups = "can1_data"; -+ function = "can1"; -+ }; -+ -+ canfd0_pins: canfd0 { -+ groups = "canfd0_data_a"; -+ function = "canfd0"; -+ }; -+ -+ canfd1_pins: canfd1 { -+ groups = "canfd1_data"; -+ function = "canfd1"; -+ }; -+}; -+ -+&gpio0 { -+ video_a_irq { -+ gpio-hog; -+ gpios = <12 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-A irq"; -+ }; -+ -+ video_b_irq { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-B irq"; -+ }; -+ -+ video_c_irq { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-C irq"; -+ }; -+}; -+ -+&gpio1 { -+ gpioext_4_22_irq { -+ gpio-hog; -+ gpios = <25 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "0x22@i2c4 irq"; -+ }; -+ pcie_disable { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "mPCIe W_DISABLE"; -+ }; -+ m2_sleep { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "M.2 SLEEP#"; -+ }; -+ m2_pres { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "M.2 Present"; -+ }; -+ m2_pcie_det { -+ gpio-hog; -+ gpios = <18 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "M.2 PCIe detected"; -+ }; -+ m2_usb_det { -+ gpio-hog; -+ gpios = <19 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "M.2 USB30 detected"; -+ }; -+ m2_usb_det { -+ gpio-hog; -+ gpios = <27 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "M.2 SSD detected"; -+ }; -+ eth_phy_reset { -+ gpio-hog; -+ gpios = <16 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "BR phy reset"; -+ }; -+ eth_sw_reset { -+ gpio-hog; -+ gpios = <17 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "BR switch reset"; -+ }; -+}; -+ -+&gpio2 { -+ m2_wake { -+ gpio-hog; -+ gpios = <1 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "M.2 WAKE#"; -+ }; -+ m2_pcie_en { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "M.2 PCIe enable"; -+ }; -+}; -+ -+&gpio3 { -+ m2_power_off { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "M.2 FULL_CARD_POWER_OFF#"; -+ }; -+}; -+ -+&gpio6 { -+ pcie_wake { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "mPCIe WAKE#"; -+ }; -+ pcie_clkreq { -+ gpio-hog; -+ gpios = <10 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "mPCIe CLKREQ#"; -+ }; -+ m2_rst { -+ gpio-hog; -+ gpios = <21 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "M.2 RESET#"; -+ }; -+}; -+ -+&hscif4 { -+ pinctrl-0 = <&hscif4_pins>; -+ pinctrl-names = "default"; -+ ctsrts; -+ -+ status = "okay"; -+}; -+ -+&i2c2 { -+ clock-frequency = <400000>; -+ -+ i2cswitch2: pca9548@74 { -+ compatible = "nxp,pca9548"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x74>; -+ reset-gpios = <&gpio6 5 GPIO_ACTIVE_LOW>; -+ -+ i2c@0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0>; -+ /* USB3.0 HUB node(s) */ -+ }; -+ -+ i2c@6 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <6>; -+ /* PCIe node(s) */ -+ }; -+ -+ i2c@7 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <7>; -+ /* Slot A (CN10) */ -+ -+ ov106xx@0 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x60>; -+ -+ port@0 { -+ ov106xx_in0: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin0ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep0>; -+ }; -+ ov106xx_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; -+ }; -+ ov106xx_ti954_des0ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep0>; -+ }; -+ }; -+ }; -+ -+ ov106xx@1 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x61>; -+ -+ port@0 { -+ ov106xx_in1: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin1ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep1>; -+ }; -+ ov106xx_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; -+ }; -+ ov106xx_ti954_des0ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep1>; -+ }; -+ }; -+ }; -+ -+ ov106xx@2 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x62>; -+ -+ port@0 { -+ ov106xx_in2: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin2ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep2>; -+ }; -+ ov106xx_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; -+ }; -+ }; -+ }; -+ -+ ov106xx@3 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x63>; -+ -+ port@0 { -+ ov106xx_in3: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin3ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des0ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep3>; -+ }; -+ ov106xx_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB964 @ 0x3a */ -+ ti964-ti9x3@0 { -+ compatible = "ti,ti964-ti9x3"; -+ reg = <0x3a>; -+ ti,sensor_delay = <350>; -+ ti,links = <4>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "stp"; -+ -+ port@0 { -+ ti964_des0ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ ti964_des0ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ ti964_des0ep2: endpoint@2 { -+ ti9x3-addr = <0x0e>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ ti964_des0ep3: endpoint@3 { -+ ti9x3-addr = <0x0f>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ ti964_csi0ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB954 @ 0x38 */ -+ ti954-ti9x3@0 { -+ compatible = "ti,ti954-ti9x3"; -+ reg = <0x38>; -+ /* gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; */ -+ ti,sensor_delay = <350>; -+ ti,links = <2>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "stp"; -+ -+ port@0 { -+ ti954_des0ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ ti954_des0ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ }; -+ port@1 { -+ ti954_csi0ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ -+ /* MAX9286 @ 0x2c */ -+ max9286-max9271@0 { -+ compatible = "maxim,max9286-max9271"; -+ reg = <0x2c>; -+ maxim,sensor_delay = <350>; -+ maxim,links = <4>; -+ maxim,lanes = <4>; -+ maxim,resetb-gpio = <1>; -+ maxim,fsync-mode = "automatic"; -+ maxim,timeout = <100>; -+ -+ port@0 { -+ max9286_des0ep0: endpoint@0 { -+ max9271-addr = <0x50>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ max9286_des0ep1: endpoint@1 { -+ max9271-addr = <0x51>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ max9286_des0ep2: endpoint@2 { -+ max9271-addr = <0x52>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ max9286_des0ep3: endpoint@3 { -+ max9271-addr = <0x53>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ max9286_csi0ep0: endpoint { -+ csi-rate = <700>; -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ }; -+ }; -+ -+ i2c@2 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <2>; -+ /* Slot B (CN11) */ -+ -+ ov106xx@4 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x64>; -+ -+ port@0 { -+ ov106xx_in4: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin4ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep0>; -+ }; -+ ov106xx_ti964_des1ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep0>; -+ }; -+ ov106xx_ti954_des1ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep0>; -+ }; -+ }; -+ }; -+ -+ ov106xx@5 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x65>; -+ -+ port@0 { -+ ov106xx_in5: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin5ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep1>; -+ }; -+ ov106xx_ti964_des1ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep1>; -+ }; -+ ov106xx_ti954_des1ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep1>; -+ }; -+ }; -+ }; -+ -+ ov106xx@6 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x66>; -+ -+ port@0 { -+ ov106xx_in6: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin6ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep2>; -+ }; -+ ov106xx_ti964_des1ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep2>; -+ }; -+ }; -+ }; -+ -+ ov106xx@7 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x67>; -+ -+ port@0 { -+ ov106xx_in7: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&vin7ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des1ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep3>; -+ }; -+ ov106xx_ti964_des1ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep3>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB964 @ 0x3a */ -+ ti964-ti9x3@1 { -+ compatible = "ti,ti964-ti9x3"; -+ reg = <0x3a>; -+ ti,sensor_delay = <350>; -+ ti,links = <4>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "stp"; -+ -+ port@0 { -+ ti964_des1ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ ti964_des1ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ ti964_des1ep2: endpoint@2 { -+ ti9x3-addr = <0x0e>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in6>; -+ }; -+ ti964_des1ep3: endpoint@3 { -+ ti9x3-addr = <0x0f>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in7>; -+ }; -+ }; -+ port@1 { -+ ti964_csi2ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB954 @ 0x38 */ -+ ti954-ti9x3@1 { -+ compatible = "ti,ti954-ti9x3"; -+ reg = <0x38>; -+ /* gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>; */ -+ ti,sensor_delay = <350>; -+ ti,links = <2>; -+ ti,lanes = <4>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "stp"; -+ -+ port@0 { -+ ti954_des1ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ ti954_des1ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ }; -+ port@1 { -+ ti954_csi2ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+ -+ /* MAX9286 @ 0x2c */ -+ max9286-max9271@1 { -+ compatible = "maxim,max9286-max9271"; -+ reg = <0x2c>; -+ maxim,sensor_delay = <350>; -+ maxim,links = <4>; -+ maxim,lanes = <4>; -+ maxim,resetb-gpio = <1>; -+ maxim,fsync-mode = "automatic"; -+ maxim,timeout = <100>; -+ -+ port@0 { -+ max9286_des1ep0: endpoint@0 { -+ max9271-addr = <0x50>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in4>; -+ }; -+ max9286_des1ep1: endpoint@1 { -+ max9271-addr = <0x51>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in5>; -+ }; -+ max9286_des1ep2: endpoint@2 { -+ max9271-addr = <0x52>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in6>; -+ }; -+ max9286_des1ep3: endpoint@3 { -+ max9271-addr = <0x53>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in7>; -+ }; -+ }; -+ port@1 { -+ max9286_csi2ep0: endpoint { -+ csi-rate = <700>; -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ }; -+ }; -+ -+ i2c@3 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <3>; -+ /* Slot C (CN12) */ -+ }; -+ -+ i2c@1 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <1>; -+ /* Slot A (CN10) */ -+ -+ video_a_ext0: pca9535@26 { -+ compatible = "nxp,pca9535"; -+ reg = <0x26>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_a_des_cfg1 { -+ gpio-hog; -+ gpios = <5 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-A cfg1"; -+ }; -+ video_a_des_cfg0 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-A cfg0"; -+ }; -+ video_a_pwr_shdn { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR_SHDN"; -+ }; -+ video_a_cam_pwr0 { -+ gpio-hog; -+ gpios = <12 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR0"; -+ }; -+ video_a_cam_pwr1 { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR1"; -+ }; -+ video_a_cam_pwr2 { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR2"; -+ }; -+ video_a_cam_pwr3 { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR3"; -+ }; -+ video_a_des_shdn { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A DES_SHDN"; -+ }; -+ video_a_des_led { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-A led"; -+ }; -+ }; -+ -+ video_a_ext1: max7325@5c { -+ compatible = "maxim,max7325"; -+ reg = <0x5c>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_a_des_cfg2 { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-A cfg2"; -+ }; -+ video_a_des_cfg1 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-A cfg1"; -+ }; -+ video_a_des_cfg0 { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-A cfg0"; -+ }; -+ video_a_pwr_shdn { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR_SHDN"; -+ }; -+ video_a_cam_pwr0 { -+ gpio-hog; -+ gpios = <8 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR0"; -+ }; -+ video_a_cam_pwr1 { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR1"; -+ }; -+ video_a_cam_pwr2 { -+ gpio-hog; -+ gpios = <10 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR2"; -+ }; -+ video_a_cam_pwr3 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A PWR3"; -+ }; -+ video_a_des_shdn { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A DES_SHDN"; -+ }; -+ video_a_led { -+ gpio-hog; -+ gpios = <12 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-A LED"; -+ }; -+ }; -+ }; -+ -+ i2c@5 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <5>; -+ /* Slot B (CN11) */ -+ -+ video_b_ext0: pca9535@26 { -+ compatible = "nxp,pca9535"; -+ reg = <0x26>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_b_des_cfg1 { -+ gpio-hog; -+ gpios = <5 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-B cfg1"; -+ }; -+ video_b_des_cfg0 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-B cfg0"; -+ }; -+ video_b_pwr_shdn { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR_SHDN"; -+ }; -+ video_b_cam_pwr0 { -+ gpio-hog; -+ gpios = <12 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR0"; -+ }; -+ video_b_cam_pwr1 { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR1"; -+ }; -+ video_b_cam_pwr2 { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR2"; -+ }; -+ video_b_cam_pwr3 { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR3"; -+ }; -+ video_b_des_shdn { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B DES_SHDN"; -+ }; -+ video_b_des_led { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-B led"; -+ }; -+ }; -+ -+ video_b_ext1: max7325@5c { -+ compatible = "maxim,max7325"; -+ reg = <0x5c>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_b_des_cfg2 { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-B cfg2"; -+ }; -+ video_b_des_cfg1 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-B cfg1"; -+ }; -+ video_b_des_cfg0 { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-B cfg0"; -+ }; -+ video_b_pwr_shdn { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR_SHDN"; -+ }; -+ video_b_cam_pwr0 { -+ gpio-hog; -+ gpios = <8 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR0"; -+ }; -+ video_b_cam_pwr1 { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR1"; -+ }; -+ video_b_cam_pwr2 { -+ gpio-hog; -+ gpios = <10 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR2"; -+ }; -+ video_b_cam_pwr3 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B PWR3"; -+ }; -+ video_b_des_shdn { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B DES_SHDN"; -+ }; -+ video_b_led { -+ gpio-hog; -+ gpios = <12 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-B LED"; -+ }; -+ }; -+ }; -+ -+ i2c@4 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <4>; -+ /* Slot C (CN12) */ -+ }; -+ }; -+}; -+ -+&i2c4 { -+ i2cswitch4: pca9548@74 { -+ compatible = "nxp,pca9548"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x74>; -+ reset-gpios= <&gpio5 15 GPIO_ACTIVE_LOW>; -+ -+ i2c@0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0>; -+ /* FAN node - EMC2103 */ -+ fan_ctrl:ecm2103@2e { -+ compatible = "emc2103"; -+ reg = <0x2e>; -+ }; -+ }; -+ -+ i2c@1 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <1>; -+ /* Power nodes - 2 x TPS544x20 */ -+ }; -+ -+ i2c@2 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <2>; -+ /* CAN and power board nodes */ -+ -+ gpio_ext_pwr: pca9535@22 { -+ compatible = "nxp,pca9535"; -+ reg = <0x22>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio1>; -+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>; -+ -+ /* enable input DCDC after wake-up signal released */ -+ pwr_hold { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "pwr_hold"; -+ }; -+ -+ /* CAN0 */ -+ can0_stby { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can0_stby"; -+ }; -+ can0_load { -+ gpio-hog; -+ gpios = <0 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can0_120R_load"; -+ }; -+ /* CAN1 */ -+ can1_stby { -+ gpio-hog; -+ gpios = <5 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can1_stby"; -+ }; -+ can1_load { -+ gpio-hog; -+ gpios = <1 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can1_120R_load"; -+ }; -+ /* CAN2 */ -+ can2_stby { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can2_stby"; -+ }; -+ can2_load { -+ gpio-hog; -+ gpios = <2 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can2_120R_load"; -+ }; -+ can2_rst { -+ gpio-hog; -+ gpios = <8 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "can2_rst"; -+ }; -+ /* CAN3 */ -+ can3_stby { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can3_stby"; -+ }; -+ can3_load { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "can3_120R_load"; -+ }; -+ can3_rst { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "can3_rst"; -+ }; -+ }; -+ }; -+ -+ i2c@3 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <3>; -+ /* FPDLink output node - DS90UH947 */ -+ }; -+ -+ i2c@4 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <4>; -+ /* BCM switch node */ -+ }; -+ -+ i2c@5 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <5>; -+ /* LED board node(s) */ -+ -+ gpio_ext_led: pca9535@22 { -+ compatible = "nxp,pca9535"; -+ reg = <0x22>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ /* gpios 0..7 are used for indication LEDs, low-active */ -+ }; -+ }; -+ -+ i2c@6 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <6>; -+ /* M2 connector i2c node(s) */ -+ }; -+ -+ /* port 7 is not used */ -+ }; -+}; -+ -+&pcie_bus_clk { -+ clock-frequency = <100000000>; -+ status = "okay"; -+}; -+ -+&pciec0 { -+ status = "okay"; -+}; -+ -+&pciec1 { -+ status = "okay"; -+}; -+ -+&vin0 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin0ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <0>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in0>; -+ }; -+ }; -+ port@1 { -+ csi0ep0: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin0_max9286_des0ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep0>; -+ }; -+ vin0_ti964_des0ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep0>; -+ }; -+ vin0_ti954_des0ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep0>; -+ }; -+ }; -+ }; -+}; -+ -+&vin1 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin1ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <1>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in1>; -+ }; -+ }; -+ port@1 { -+ csi0ep1: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin1_max9286_des0ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep1>; -+ }; -+ vin1_ti964_des0ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep1>; -+ }; -+ vin1_ti954_des0ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des0ep1>; -+ }; -+ }; -+ }; -+}; -+ -+&vin2 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin2ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <2>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in2>; -+ }; -+ }; -+ port@1 { -+ csi0ep2: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin2_max9286_des0ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep2>; -+ }; -+ vin2_ti964_des0ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep2>; -+ }; -+ }; -+ }; -+}; -+ -+&vin3 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin3ep0: endpoint { -+ csi,select = "csi40"; -+ virtual,channel = <3>; -+ data-lanes = <1 2 3 4>; -+ remote-endpoint = <&ov106xx_in3>; -+ }; -+ }; -+ port@1 { -+ csi0ep3: endpoint { -+ remote-endpoint = <&csi2_40_ep>; -+ }; -+ }; -+ port@2 { -+ vin3_max9286_des0ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des0ep3>; -+ }; -+ vin3_ti964_des0ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des0ep3>; -+ }; -+ }; -+ }; -+}; -+ -+&vin4 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin4ep0: endpoint { -+ csi,select = "csi41"; -+ virtual,channel = <0>; -+ remote-endpoint = <&ov106xx_in4>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep0: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin4_max9286_des1ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep0>; -+ }; -+ vin4_ti964_des1ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep0>; -+ }; -+ vin4_ti954_des1ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep0>; -+ }; -+ }; -+ }; -+}; -+ -+&vin5 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin5ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <1>; -+ remote-endpoint = <&ov106xx_in5>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep1: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin5_max9286_des1ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep1>; -+ }; -+ vin5_ti964_des1ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep1>; -+ }; -+ vin5_ti954_des1ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des1ep1>; -+ }; -+ }; -+ }; -+}; -+ -+&vin6 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin6ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <2>; -+ remote-endpoint = <&ov106xx_in6>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep2: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin6_max9286_des1ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep2>; -+ }; -+ vin6_ti964_des1ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep2>; -+ }; -+ }; -+ }; -+}; -+ -+&vin7 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin7ep0: endpoint@0 { -+ csi,select = "csi41"; -+ virtual,channel = <3>; -+ remote-endpoint = <&ov106xx_in7>; -+ data-lanes = <1 2 3 4>; -+ }; -+ }; -+ port@1 { -+ csi2ep3: endpoint { -+ remote-endpoint = <&csi2_41_ep>; -+ }; -+ }; -+ port@2 { -+ vin7_max9286_des1ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des1ep3>; -+ }; -+ vin7_ti964_des1ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des1ep3>; -+ }; -+ }; -+ }; -+}; -+ -+&csi2_40 { -+ status = "okay"; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "ycbcr422"; -+ receive,vc = <0>; -+ }; -+ csi2_vc1 { -+ data,type = "ycbcr422"; -+ receive,vc = <1>; -+ }; -+ csi2_vc2 { -+ data,type = "ycbcr422"; -+ receive,vc = <2>; -+ }; -+ csi2_vc3 { -+ data,type = "ycbcr422"; -+ receive,vc = <3>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_40_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ csi-rate = <300>; -+ }; -+ }; -+}; -+ -+&csi2_41 { -+ status = "okay"; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "ycbcr422"; -+ receive,vc = <0>; -+ }; -+ csi2_vc1 { -+ data,type = "ycbcr422"; -+ receive,vc = <1>; -+ }; -+ csi2_vc2 { -+ data,type = "ycbcr422"; -+ receive,vc = <2>; -+ }; -+ csi2_vc3 { -+ data,type = "ycbcr422"; -+ receive,vc = <3>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_41_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2 3 4>; -+ csi-rate = <300>; -+ }; -+ }; -+}; -+ -+&rcar_sound { -+ pinctrl-0 = <&sound_clk_pins>; -+ -+ /* Multi DAI */ -+ #sound-dai-cells = <1>; -+}; -+ -+&sata { -+ status = "okay"; -+}; -+ -+&ssi1 { -+ /delete-property/shared-pin; -+}; -+ -+&avb { -+ /delete-property/phy-handle; -+ /delete-property/phy-gpios; -+ phy-mode = "rgmii"; -+ -+ /delete-node/ethernet-phy@0; -+ -+ fixed-link { -+ speed = <100>; -+ full-duplex; -+ }; -+}; -+ -+&msiof1 { -+ status = "disabled"; -+}; -+ -+&usb2_phy0 { -+ pinctrl-0 = <&usb0_pins>; -+ pinctrl-names = "default"; -+ -+ status = "okay"; -+}; -+ -+&xhci0 { -+ status = "okay"; -+}; -+ -+&hsusb0 { -+ status = "okay"; -+}; -+ -+&ehci0 { -+ status = "okay"; -+}; -+ -+&ohci0 { -+ status = "okay"; -+}; -+ -+&can0 { -+ pinctrl-0 = <&can0_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ -+ renesas,can-clock-select = <0x0>; -+}; -+ -+&can1 { -+ pinctrl-0 = <&can1_pins>; -+ pinctrl-names = "default"; -+ status = "okay"; -+ -+ renesas,can-clock-select = <0x0>; -+}; -+ -+&canfd { -+ pinctrl-0 = <&canfd0_pins &canfd1_pins>; -+ pinctrl-names = "default"; -+ status = "disabled"; -+ -+ renesas,can-clock-select = <0x0>; -+ -+ channel0 { -+ status = "okay"; -+ }; -+ -+ channel1 { -+ status = "okay"; -+ }; -+}; -+ -+/* uncomment to enable CN12 on VIN4-7 */ -+//#include "ulcb-vb-cn12.dtsi" -diff --git a/arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi b/arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi -new file mode 100644 -index 0000000..9c6d10c ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi -@@ -0,0 +1,515 @@ -+/* -+ * Device Tree Source for the H3ULCB Videobox board: -+ * this adding conflicting resource on VIN4/VIN5/VIN6/VIN7 for CN12 -+ * -+ * Copyright (C) 2017 Renesas Electronics Corp. -+ * Copyright (C) 2017 Cogent Embedded, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+&i2cswitch2 { -+ i2c@3 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <3>; -+ /* Slot C (CN12) */ -+ -+ ov106xx@8 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x68>; -+ -+ port@0 { -+ ov106xx_in8: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2>; -+ remote-endpoint = <&vin4ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des2ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des2ep0>; -+ }; -+ ov106xx_ti964_des2ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des2ep0>; -+ }; -+ ov106xx_ti954_des2ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des2ep0>; -+ }; -+ }; -+ }; -+ -+ ov106xx@9 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x69>; -+ -+ port@0 { -+ ov106xx_in9: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2>; -+ remote-endpoint = <&vin5ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des2ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des2ep1>; -+ }; -+ ov106xx_ti964_des2ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des2ep1>; -+ }; -+ ov106xx_ti954_des2ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des2ep1>; -+ }; -+ }; -+ }; -+ -+ ov106xx@10 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x6a>; -+ -+ port@0 { -+ ov106xx_in10: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2>; -+ remote-endpoint = <&vin6ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des2ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des2ep2>; -+ }; -+ ov106xx_ti964_des2ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des2ep2>; -+ }; -+ }; -+ }; -+ -+ ov106xx@11 { -+ compatible = "ovti,ov106xx"; -+ reg = <0x6b>; -+ -+ port@0 { -+ ov106xx_in11: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2>; -+ remote-endpoint = <&vin7ep0>; -+ }; -+ }; -+ port@1 { -+ ov106xx_max9286_des2ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des2ep3>; -+ }; -+ ov106xx_ti964_des2ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des2ep3>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB964 @ 0x3a */ -+ ti964-ti9x3@2 { -+ compatible = "ti,ti964-ti9x3"; -+ reg = <0x3a>; -+ ti,sensor_delay = <350>; -+ ti,links = <4>; -+ ti,lanes = <2>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "coax"; -+ -+ port@0 { -+ ti964_des2ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in8>; -+ }; -+ ti964_des2ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in9>; -+ }; -+ ti964_des2ep2: endpoint@2 { -+ ti9x3-addr = <0x0e>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in10>; -+ }; -+ ti964_des2ep3: endpoint@3 { -+ ti9x3-addr = <0x0f>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in11>; -+ }; -+ }; -+ port@1 { -+ ti964_csi1ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_20_ep>; -+ }; -+ }; -+ }; -+ -+ /* DS90UB954 @ 0x38 */ -+ ti954-ti9x3@2 { -+ compatible = "ti,ti954-ti9x3"; -+ reg = <0x38>; -+ /* gpios = <&video_c_ext1 10 GPIO_ACTIVE_HIGH>; */ -+ ti,sensor_delay = <350>; -+ ti,links = <2>; -+ ti,lanes = <2>; -+ ti,forwarding-mode = "round-robin"; -+ ti,cable-mode = "coax"; -+ -+ port@0 { -+ ti954_des2ep0: endpoint@0 { -+ ti9x3-addr = <0x0c>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in8>; -+ }; -+ ti954_des2ep1: endpoint@1 { -+ ti9x3-addr = <0x0d>; -+ dvp-order = <0>; -+ remote-endpoint = <&ov106xx_in9>; -+ }; -+ }; -+ port@1 { -+ ti954_csi1ep0: endpoint { -+ csi-rate = <1450>; -+ remote-endpoint = <&csi2_20_ep>; -+ }; -+ }; -+ }; -+ -+ /* MAX9286 @ 0x2c */ -+ max9286-max9271@2 { -+ compatible = "maxim,max9286-max9271"; -+ reg = <0x2c>; -+ maxim,sensor_delay = <350>; -+ maxim,links = <4>; -+ maxim,lanes = <2>; -+ maxim,resetb-gpio = <1>; -+ maxim,fsync-mode = "automatic"; -+ maxim,timeout = <100>; -+ -+ port@0 { -+ max9286_des2ep0: endpoint@0 { -+ max9271-addr = <0x50>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in8>; -+ }; -+ max9286_des2ep1: endpoint@1 { -+ max9271-addr = <0x51>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in9>; -+ }; -+ max9286_des2ep2: endpoint@2 { -+ max9271-addr = <0x52>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in10>; -+ }; -+ max9286_des2ep3: endpoint@3 { -+ max9271-addr = <0x53>; -+ dvp-order = <1>; -+ remote-endpoint = <&ov106xx_in11>; -+ }; -+ }; -+ port@1 { -+ max9286_csi1ep0: endpoint { -+ csi-rate = <700>; -+ remote-endpoint = <&csi2_20_ep>; -+ }; -+ }; -+ }; -+ }; -+ -+ i2c@4 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <4>; -+ /* Slot C (CN12) */ -+ -+ video_c_ext0: pca9535@26 { -+ compatible = "nxp,pca9535"; -+ reg = <0x26>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_c_des_cfg1 { -+ gpio-hog; -+ gpios = <5 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-C cfg1"; -+ }; -+ video_c_des_cfg0 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-C cfg0"; -+ }; -+ video_c_pwr_shdn { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-C PWR_SHDN"; -+ }; -+ video_c_cam_pwr0 { -+ gpio-hog; -+ gpios = <12 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-C PWR0"; -+ }; -+ video_c_cam_pwr1 { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-C PWR1"; -+ }; -+ video_c_cam_pwr2 { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-C PWR2"; -+ }; -+ video_c_cam_pwr3 { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-C PWR3"; -+ }; -+ video_c_des_shdn { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-C DES_SHDN"; -+ }; -+ video_c_des_led { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-C led"; -+ }; -+ }; -+ -+ video_c_ext1: max7325@5c { -+ compatible = "maxim,max7325"; -+ reg = <0x5c>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ -+ video_c_des_cfg2 { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-C cfg2"; -+ }; -+ video_c_des_cfg1 { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-C cfg1"; -+ }; -+ video_c_des_cfg0 { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-C cfg0"; -+ }; -+ video_c_pwr_shdn { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-C PWR_SHDN"; -+ }; -+ video_c_cam_pwr0 { -+ gpio-hog; -+ gpios = <8 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-C PWR0"; -+ }; -+ video_c_cam_pwr1 { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-C PWR1"; -+ }; -+ video_c_cam_pwr2 { -+ gpio-hog; -+ gpios = <10 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-C PWR2"; -+ }; -+ video_c_cam_pwr3 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-C PWR3"; -+ }; -+ video_c_des_shdn { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-C DES_SHDN"; -+ }; -+ video_c_led { -+ gpio-hog; -+ gpios = <12 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-C LED"; -+ }; -+ }; -+ }; -+}; -+ -+&vin4 { -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin4ep0: endpoint { -+ csi,select = "csi20"; -+ virtual,channel = <0>; -+ remote-endpoint = <&ov106xx_in8>; -+ data-lanes = <1 2>; -+ }; -+ }; -+ port@1 { -+ csi2ep0: endpoint { -+ remote-endpoint = <&csi2_20_ep>; -+ }; -+ }; -+ port@2 { -+ vin4_max9286_des2ep0: endpoint@0 { -+ remote-endpoint = <&max9286_des2ep0>; -+ }; -+ vin4_ti964_des2ep0: endpoint@1 { -+ remote-endpoint = <&ti964_des2ep0>; -+ }; -+ vin4_ti954_des2ep0: endpoint@2 { -+ remote-endpoint = <&ti954_des2ep0>; -+ }; -+ }; -+ }; -+}; -+ -+&vin5 { -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin5ep0: endpoint@0 { -+ csi,select = "csi20"; -+ virtual,channel = <1>; -+ remote-endpoint = <&ov106xx_in9>; -+ data-lanes = <1 2>; -+ }; -+ }; -+ port@1 { -+ csi2ep1: endpoint { -+ remote-endpoint = <&csi2_20_ep>; -+ }; -+ }; -+ port@2 { -+ vin5_max9286_des2ep1: endpoint@0 { -+ remote-endpoint = <&max9286_des2ep1>; -+ }; -+ vin5_ti964_des2ep1: endpoint@1 { -+ remote-endpoint = <&ti964_des2ep1>; -+ }; -+ vin5_ti954_des2ep1: endpoint@2 { -+ remote-endpoint = <&ti954_des2ep1>; -+ }; -+ }; -+ }; -+}; -+ -+&vin6 { -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin6ep0: endpoint@0 { -+ csi,select = "csi20"; -+ virtual,channel = <2>; -+ remote-endpoint = <&ov106xx_in10>; -+ data-lanes = <1 2>; -+ }; -+ }; -+ port@1 { -+ csi2ep2: endpoint { -+ remote-endpoint = <&csi2_20_ep>; -+ }; -+ }; -+ port@2 { -+ vin6_max9286_des2ep2: endpoint@0 { -+ remote-endpoint = <&max9286_des2ep2>; -+ }; -+ vin6_ti964_des2ep2: endpoint@1 { -+ remote-endpoint = <&ti964_des2ep2>; -+ }; -+ }; -+ }; -+}; -+ -+&vin7 { -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin7ep0: endpoint@0 { -+ csi,select = "csi20"; -+ virtual,channel = <3>; -+ remote-endpoint = <&ov106xx_in11>; -+ data-lanes = <1 2>; -+ }; -+ }; -+ port@1 { -+ csi2ep3: endpoint { -+ remote-endpoint = <&csi2_20_ep>; -+ }; -+ }; -+ port@2 { -+ vin7_max9286_des2ep3: endpoint@0 { -+ remote-endpoint = <&max9286_des2ep3>; -+ }; -+ vin7_ti964_des2ep3: endpoint@1 { -+ remote-endpoint = <&ti964_des2ep3>; -+ }; -+ }; -+ }; -+}; -+ -+&csi2_20 { -+ status = "okay"; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "ycbcr422"; -+ receive,vc = <0>; -+ }; -+ csi2_vc1 { -+ data,type = "ycbcr422"; -+ receive,vc = <1>; -+ }; -+ csi2_vc2 { -+ data,type = "ycbcr422"; -+ receive,vc = <2>; -+ }; -+ csi2_vc3 { -+ data,type = "ycbcr422"; -+ receive,vc = <3>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_20_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2>; -+ csi-rate = <300>; -+ }; -+ }; -+}; --- -1.9.1 - diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/m3ulcb.cfg b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/m3ulcb.cfg deleted file mode 100644 index 73008f1..0000000 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/m3ulcb.cfg +++ /dev/null @@ -1,65 +0,0 @@ -CONFIG_CAN=y -CONFIG_CAN_PEAK_USB=y -CONFIG_CAN_BCM=y -CONFIG_CAN_RAW=y -CONFIG_CAN_DEV=y -CONFIG_CAN_CALC_BITTIMING=y -CONFIG_CAN_RCAR=y -CONFIG_CAN_RCAR_CANFD=y -CONFIG_DUMMY=y -CONFIG_EXTRA_FIRMWARE="r8a779x_usb3_v2.dlmem r8a779x_usb3_v3.dlmem" -CONFIG_EXTRA_FIRMWARE_DIR="firmware" -CONFIG_BLK_DEV_NVME=m -CONFIG_SATA_ACARD_AHCI=y -CONFIG_FIXED_PHY=y -CONFIG_SPI_BITBANG=y -CONFIG_SPI_GPIO=y -CONFIG_GPIO_MAX732X=y -CONFIG_GPIO_MAX732X_IRQ=y -CONFIG_GPIO_PCA953X=y -CONFIG_GPIO_PCA953X_IRQ=y -CONFIG_VIDEO_ADV_DEBUG=y -CONFIG_VIDEO_RCAR_VIN_LEGACY=y -CONFIG_VIDEO_RCAR_CSI2_LEGACY=y -# CONFIG_VIDEO_RCAR_VIN is not set -# CONFIG_VIDEO_RCAR_CSI2 is not set -CONFIG_SOC_CAMERA=y -CONFIG_SOC_CAMERA_SCALE_CROP=y -CONFIG_SOC_CAMERA_PLATFORM=y -CONFIG_SOC_CAMERA_MAX9286_MAX9271=y -CONFIG_SOC_CAMERA_TI964_TI9X3=y -CONFIG_SOC_CAMERA_TI954_TI9X3=y -CONFIG_SOC_CAMERA_OV106XX=y -CONFIG_SOC_CAMERA_OV5647=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_PLATFORM=y -CONFIG_USB_XHCI_RCAR=y -CONFIG_USB_ACM=y -CONFIG_VIDEO_RENESAS_IMR=y -CONFIG_VIRTIO_RCAR_PCIE=y -CONFIG_BT=y -CONFIG_TI_ST=m -CONFIG_BT_WILINK=m -CONFIG_WEXT_CORE=y -CONFIG_WEXT_PROC=y -CONFIG_CFG80211_WEXT=y -CONFIG_MAC80211=y -CONFIG_WLAN=y -CONFIG_WL18XX=m -CONFIG_WLCORE=m -CONFIG_WLCORE_SDIO=m -CONFIG_SND_SOC_SI468X=y -CONFIG_SND_SOC_PCM3168A=y -CONFIG_SND_SOC_PCM3168A_I2C=y -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_PROPERTIES=y -CONFIG_HID_MULTITOUCH=y -CONFIG_IIO=y -CONFIG_IIO_BUFFER=y -CONFIG_IIO_BUFFER_CB=y -CONFIG_IIO_KFIFO_BUF=y -CONFIG_IIO_TRIGGERED_BUFFER=y -CONFIG_IIO_TRIGGER=y -CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 -CONFIG_LSM9DS0=y -CONFIG_DRM_I2C_ADV7511=y diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/h3ulcb.cfg b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/ulcb.cfg index 73008f1..73008f1 100644 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/h3ulcb.cfg +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/ulcb.cfg diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas_4.9.bbappend b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas_4.9.bbappend index 86ca21d..8f7359d 100644 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas_4.9.bbappend +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas_4.9.bbappend @@ -33,18 +33,7 @@ SRC_URI_append = " \ file://0028-usb-host-xhci-rcar-update-firmware-for-R-Car-H3-and-.patch \ file://0029-i2c-mux-pca954x-fix-i2c-mux-selection-caching.patch \ file://0030-Gen3-LVDS-cameras.patch \ - file://0031-arm64-dts-r8a7795-es1-salvator-x-view-add-ADAS-board.patch \ - file://0032-arm64-dts-r8a7795-es1-h3ulcb-view-add-ADAS-board.patch \ - file://0033-arm64-dts-r8a7795-es1-h3ulcb-had-add-ADAS-board.patch \ - file://0034-arm64-dts-r8a7795-es1-h3ulcb-kf-add-ADAS-board.patch \ - file://0035-arm64-dts-r8a7796-salvator-x-view-add-ADAS-board.patch \ - file://0036-arm64-dts-r8a7796-m3ulcb-view-add-ADAS-board.patch \ - file://0037-arm64-dts-r8a7796-m3ulcb-kf-add-ADAS-board.patch \ - file://0038-arm64-dts-r8a7795-salvator-x-view-add-ADAS-board.patch \ - file://0039-arm64-dts-r8a7795-h3ulcb-view-add-ADAS-board.patch \ - file://0040-arm64-dts-r8a7795-h3ulcb-had-add-ADAS-board.patch \ - file://0041-arm64-dts-r8a7795-h3ulcb-kf-add-ADAS-board.patch \ - file://0042-arm64-dts-r8a7795-h3ulcb-vb-add-ADAS-board.patch \ + file://0040-arm64-dts-renesas-add-ADAS-boards.patch \ ${@base_conditional("LVDSCAMERA_FIRST4_TYPE1", "1", " file://0050-arm64-dts-Gen3-view-boards-TYPE1-first-4-cameras.patch", "", d)} \ ${@base_conditional("LVDSCAMERA_SECOND4_TYPE1", "1", " file://0051-arm64-dts-Gen3-view-boards-TYPE1-second-4-cameras.patch", "", d)} \ ${@base_conditional("LVDSCAMERA_FIRST4_TYPE2", "1", " file://0052-arm64-dts-Gen3-view-boards-TYPE2-first-4-cameras.patch", "", d)} \ @@ -54,8 +43,8 @@ SRC_URI_append = " \ file://0063-ASoC-PCM3168A-add-TDM-modes-merge-ADC-and-DAC.patch \ " -SRC_URI_append_h3ulcb = " file://h3ulcb.cfg" -SRC_URI_append_m3ulcb = " file://m3ulcb.cfg" +SRC_URI_append_h3ulcb = " file://ulcb.cfg" +SRC_URI_append_m3ulcb = " file://ulcb.cfg" SRC_URI_append_salvator-x = " file://salvator-x.cfg" SRC_URI_append_eagle = " file://eagle.cfg" |