diff options
Diffstat (limited to 'meta-rcar-gen3-adas')
| -rw-r--r-- | meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch | 1998 |
1 files changed, 1981 insertions, 17 deletions
diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch index 017dc68..7c19263 100644 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch @@ -24,41 +24,45 @@ V3MSK.View board on R8A7797 SoC Videobox Mini board on R8A7795 ES1.x SoC Videobox Mini board on R8A7795 SoC Videobox Mini board on R8A7797 SoC +Videobox2 board on R8A7795 ES1.x SoC +Videobox2 board on R8A7795 SoC Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> --- - arch/arm64/boot/dts/renesas/Makefile | 19 + + arch/arm64/boot/dts/renesas/Makefile | 20 + arch/arm64/boot/dts/renesas/legacy/Makefile | 8 + .../renesas/legacy/r8a7795-es1-h3ulcb-kf-v0.dts | 1710 +++++++++++++++++++ .../renesas/legacy/r8a7795-es1-h3ulcb-kf-v1.dts | 441 +++++ .../dts/renesas/legacy/r8a7795-h3ulcb-kf-v0.dts | 1724 +++++++++++++++++++ - .../dts/renesas/legacy/r8a7795-h3ulcb-kf-v1.dts | 465 ++++++ - .../dts/renesas/legacy/r8a7796-m3ulcb-kf-v0.dts | 1214 ++++++++++++++ - .../dts/renesas/legacy/r8a7796-m3ulcb-kf-v1.dts | 465 ++++++ + .../dts/renesas/legacy/r8a7795-h3ulcb-kf-v1.dts | 465 +++++ + .../dts/renesas/legacy/r8a7796-m3ulcb-kf-v0.dts | 1214 +++++++++++++ + .../dts/renesas/legacy/r8a7796-m3ulcb-kf-v1.dts | 465 +++++ .../dts/renesas/legacy/r8a7797-v3msk-kf-v0.dts | 82 + .../boot/dts/renesas/legacy/ulcb-kf-cmos.dtsi | 75 + .../arm64/boot/dts/renesas/legacy/ulcb-kf-rpi.dtsi | 77 + .../dts/renesas/r8a7795-es1-h3ulcb-had-alfa.dts | 22 + .../dts/renesas/r8a7795-es1-h3ulcb-had-beta.dts | 23 + - .../boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi | 225 +++ + .../boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi | 221 +++ .../boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts | 39 + .../boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts | 69 + + .../boot/dts/renesas/r8a7795-es1-h3ulcb-vb2.dts | 77 + .../boot/dts/renesas/r8a7795-es1-h3ulcb-vbm.dts | 26 + - .../boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts | 546 +++++++ - .../dts/renesas/r8a7795-es1-salvator-x-view.dts | 552 +++++++ + .../boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts | 546 ++++++ + .../dts/renesas/r8a7795-es1-salvator-x-view.dts | 552 ++++++ .../boot/dts/renesas/r8a7795-h3ulcb-had-alfa.dts | 22 + .../boot/dts/renesas/r8a7795-h3ulcb-had-beta.dts | 23 + - .../arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi | 219 +++ + .../arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi | 215 +++ arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts | 39 + arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts | 68 + + arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb2.dts | 68 + arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vbm.dts | 26 + - .../arm64/boot/dts/renesas/r8a7795-h3ulcb-view.dts | 546 +++++++ - .../boot/dts/renesas/r8a7795-salvator-x-view.dts | 552 +++++++ + .../arm64/boot/dts/renesas/r8a7795-h3ulcb-view.dts | 546 ++++++ + .../boot/dts/renesas/r8a7795-salvator-x-view.dts | 552 ++++++ arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts | 40 + .../arm64/boot/dts/renesas/r8a7796-m3ulcb-view.dts | 287 ++++ .../boot/dts/renesas/r8a7796-salvator-x-view.dts | 318 ++++ .../boot/dts/renesas/r8a7797-eagle-function.dts | 62 + - arch/arm64/boot/dts/renesas/r8a7797-eagle.dts | 560 +++++++ + arch/arm64/boot/dts/renesas/r8a7797-eagle.dts | 560 ++++++ arch/arm64/boot/dts/renesas/r8a7797-v3msk-kf.dts | 578 +++++++ arch/arm64/boot/dts/renesas/r8a7797-v3msk-vbm.dts | 518 ++++++ arch/arm64/boot/dts/renesas/r8a7797-v3msk-view.dts | 298 ++++ @@ -68,9 +72,10 @@ Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> arch/arm64/boot/dts/renesas/ulcb-kf-sd3.dtsi | 46 + arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 1542 +++++++++++++++++ arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi | 515 ++++++ - arch/arm64/boot/dts/renesas/ulcb-vb.dtsi | 1726 ++++++++++++++++++++ + arch/arm64/boot/dts/renesas/ulcb-vb.dtsi | 1726 +++++++++++++++++++ + arch/arm64/boot/dts/renesas/ulcb-vb2.dtsi | 1792 ++++++++++++++++++++ arch/arm64/boot/dts/renesas/ulcb-vbm.dtsi | 578 +++++++ - 43 files changed, 17234 insertions(+) + 46 files changed, 19164 insertions(+) create mode 100644 arch/arm64/boot/dts/renesas/legacy/Makefile create mode 100644 arch/arm64/boot/dts/renesas/legacy/r8a7795-es1-h3ulcb-kf-v0.dts create mode 100644 arch/arm64/boot/dts/renesas/legacy/r8a7795-es1-h3ulcb-kf-v1.dts @@ -86,6 +91,7 @@ Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts + create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vb2.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vbm.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x-view.dts @@ -94,6 +100,7 @@ Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts + create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb2.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vbm.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-view.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-salvator-x-view.dts @@ -112,13 +119,14 @@ Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> create mode 100644 arch/arm64/boot/dts/renesas/ulcb-kf.dtsi create mode 100644 arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi create mode 100644 arch/arm64/boot/dts/renesas/ulcb-vb.dtsi + create mode 100644 arch/arm64/boot/dts/renesas/ulcb-vb2.dtsi create mode 100644 arch/arm64/boot/dts/renesas/ulcb-vbm.dtsi diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile -index f9c71df..d49df63 100644 +index f9c71df..1c63893 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile -@@ -6,5 +6,24 @@ dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb +@@ -6,5 +6,25 @@ dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-x.dtb dtb-$(CONFIG_ARCH_R8A77965) += r8a77965-salvator-xs.dtb @@ -131,6 +139,7 @@ index f9c71df..d49df63 100644 +dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-had-alfa.dtb r8a7795-h3ulcb-had-beta.dtb r8a7795-es1-h3ulcb-had-alfa.dtb r8a7795-es1-h3ulcb-had-beta.dtb +dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb r8a7795-es1-h3ulcb-kf.dtb +dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-vb.dtb r8a7795-es1-h3ulcb-vb.dtb ++dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-vb2.dtb r8a7795-es1-h3ulcb-vb2.dtb +dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-vbm.dtb r8a7795-es1-h3ulcb-vbm.dtb +dtb-$(CONFIG_ARCH_R8A7797) += r8a7797-eagle.dtb r8a7797-eagle-function.dtb +dtb-$(CONFIG_ARCH_R8A7797) += r8a7797-v3msk.dtb @@ -6523,7 +6532,7 @@ index 0000000..2f8b274 +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi new file mode 100644 -index 0000000..d50ff7a +index 0000000..dd399f4 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi @@ -0,0 +1,221 @@ @@ -6868,6 +6877,89 @@ index 0000000..549a717 +&hsusb { + status = "okay"; +}; +diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vb2.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vb2.dts +new file mode 100644 +index 0000000..1a8db57 +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vb2.dts +@@ -0,0 +1,77 @@ ++/* ++ * Device Tree Source for the H3ULCB Videobox board V2 on r8a7795 ++ * ++ * Copyright (C) 2018 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++#include "r8a7795-es1-h3ulcb.dts" ++#include "ulcb-vb2.dtsi" ++ ++/ { ++ model = "Renesas H3ULCB Videobox board based on r8a7795"; ++ ++ hdmi1-out { ++ compatible = "hdmi-connector"; ++ type = "a"; ++ ++ port { ++ hdmi1_con: endpoint { ++ remote-endpoint = <&rcar_dw_hdmi1_out>; ++ }; ++ }; ++ }; ++}; ++ ++&pfc { ++ usb31_pins: usb31 { ++ groups = "usb31"; ++ function = "usb31"; ++ }; ++}; ++ ++&du { ++ ports { ++ port@2 { ++ endpoint { ++ remote-endpoint = <&rcar_dw_hdmi1_in>; ++ }; ++ }; ++ port@3 { ++ endpoint { ++ remote-endpoint = <&lvds_enc_in>; ++ }; ++ }; ++ }; ++}; ++ ++&hdmi1 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ rcar_dw_hdmi1_in: endpoint { ++ remote-endpoint = <&du_out_hdmi1>; ++ }; ++ }; ++ port@1 { ++ reg = <1>; ++ rcar_dw_hdmi1_out: endpoint { ++ remote-endpoint = <&hdmi1_con>; ++ }; ++ }; ++ }; ++}; ++ ++&xhci1 { ++ status = "okay"; ++ pinctrl-0 = <&usb31_pins>; ++ pinctrl-names = "default"; ++}; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vbm.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vbm.dts new file mode 100644 index 0000000..323722c @@ -8069,7 +8161,7 @@ index 0000000..805067e +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi new file mode 100644 -index 0000000..4a00426 +index 0000000..d1bbea4 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi @@ -0,0 +1,215 @@ @@ -8407,6 +8499,80 @@ index 0000000..330bba2 +&hsusb0 { + status = "okay"; +}; +diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb2.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb2.dts +new file mode 100644 +index 0000000..e862d3e +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb2.dts +@@ -0,0 +1,68 @@ ++/* ++ * Device Tree Source for the H3ULCB Videobox board V2 on r8a7795 ++ * ++ * Copyright (C) 2018 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++#include "r8a7795-h3ulcb.dts" ++#include "ulcb-vb2.dtsi" ++ ++/ { ++ model = "Renesas H3ULCB Videobox board based on r8a7795"; ++ ++ hdmi1-out { ++ compatible = "hdmi-connector"; ++ type = "a"; ++ ++ port { ++ hdmi1_con: endpoint { ++ remote-endpoint = <&rcar_dw_hdmi1_out>; ++ }; ++ }; ++ }; ++}; ++ ++&du { ++ ports { ++ port@2 { ++ endpoint { ++ remote-endpoint = <&rcar_dw_hdmi1_in>; ++ }; ++ }; ++ port@3 { ++ endpoint { ++ remote-endpoint = <&lvds_enc_in>; ++ }; ++ }; ++ }; ++}; ++ ++&hdmi1 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ rcar_dw_hdmi1_in: endpoint { ++ remote-endpoint = <&du_out_hdmi1>; ++ }; ++ }; ++ port@1 { ++ reg = <1>; ++ rcar_dw_hdmi1_out: endpoint { ++ remote-endpoint = <&hdmi1_con>; ++ }; ++ }; ++ }; ++}; ++ ++&hsusb0 { ++ status = "okay"; ++}; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vbm.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vbm.dts new file mode 100644 index 0000000..87f1889 @@ -17018,6 +17184,1804 @@ index 0000000..4fcb320 + +/* uncomment to enable CN12 on VIN4-7 */ +//#include "ulcb-vb-cn12.dtsi" +diff --git a/arch/arm64/boot/dts/renesas/ulcb-vb2.dtsi b/arch/arm64/boot/dts/renesas/ulcb-vb2.dtsi +new file mode 100644 +index 0000000..67b6085 +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/ulcb-vb2.dtsi +@@ -0,0 +1,1792 @@ ++/* ++ * Device Tree Source for the ULCB Videobox V2 board ++ * ++ * Copyright (C) 2018 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++/ { ++ leds { ++ compatible = "gpio-leds"; ++ ++ led5 { ++ gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>; ++ }; ++ led6 { ++ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; ++ }; ++ /* D13 - status 0 */ ++ led_ext00 { ++ gpios = <&gpio_ext_led 0 GPIO_ACTIVE_LOW>; ++ /* linux,default-trigger = "heartbeat"; */ ++ }; ++ /* D14 - status 1 */ ++ led_ext01 { ++ gpios = <&gpio_ext_led 1 GPIO_ACTIVE_LOW>; ++ /* linux,default-trigger = "mmc1"; */ ++ }; ++ /* D16 - HDMI0 */ ++ led_ext02 { ++ gpios = <&gpio_ext_led 2 GPIO_ACTIVE_LOW>; ++ }; ++ /* D18 - HDMI1 */ ++ led_ext03 { ++ gpios = <&gpio_ext_led 3 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ snd_clk: snd_clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <24576000>; ++ clock-output-names = "scki"; ++ }; ++ ++ vcc_sdhi3: regulator-vcc-sdhi3 { ++ compatible = "regulator-fixed"; ++ ++ regulator-name = "SDHI3 Vcc"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ }; ++ ++ vccq_sdhi3: regulator-vccq-sdhi3 { ++ compatible = "regulator-fixed"; ++ ++ regulator-name = "SDHI3 VccQ"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ }; ++ ++ fpdlink_switch: regulator@8 { ++ compatible = "regulator-fixed"; ++ regulator-name = "fpdlink_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio1 20 0>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ hub_reset: regulator@9 { ++ compatible = "regulator-fixed"; ++ regulator-name = "hub_reset"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio5 5 0>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ hub_power: regulator@10 { ++ compatible = "regulator-fixed"; ++ regulator-name = "hub_power"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ gpio = <&gpio6 28 0>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ /delete-node/sound; ++ ++ rsnd_ak4613: sound@0 { ++ pinctrl-0 = <&sound_0_pins>; ++ pinctrl-names = "default"; ++ compatible = "simple-audio-card"; ++ ++ simple-audio-card,format = "left_j"; ++ simple-audio-card,name = "ak4613"; ++ ++ simple-audio-card,bitclock-master = <&sndcpu>; ++ simple-audio-card,frame-master = <&sndcpu>; ++ ++ sndcpu: simple-audio-card,cpu@1 { ++ sound-dai = <&rcar_sound>; ++ }; ++ ++ sndcodec: simple-audio-card,codec@1 { ++ sound-dai = <&ak4613>; ++ }; ++ }; ++ ++ lvds-encoder { ++ compatible = "thine,thc63lvdm83d"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ port@0 { ++ reg = <0>; ++ lvds_enc_in: endpoint { ++ remote-endpoint = <&du_out_lvds0>; ++ }; ++ }; ++ port@1 { ++ reg = <1>; ++ lvds_enc_out: endpoint { ++ remote-endpoint = <&lvds_in>; ++ }; ++ }; ++ }; ++ }; ++ ++ lvds { ++ compatible = "lvds-connector"; ++ ++ width-mm = <210>; ++ height-mm = <158>; ++ ++ panel-timing { ++ /* 1280x800 @60Hz */ ++ clock-frequency = <65000000>; ++ hactive = <1280>; ++ vactive = <800>; ++ hsync-len = <40>; ++ hfront-porch = <80>; ++ hback-porch = <40>; ++ vfront-porch = <14>; ++ vback-porch = <14>; ++ vsync-len = <4>; ++ }; ++ ++ port { ++ lvds_in: endpoint { ++ remote-endpoint = <&lvds_enc_out>; ++ }; ++ }; ++ }; ++ ++ excan_ref_clk: excan-ref-clock { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <16000000>; ++ }; ++ ++ spi_gpio_sw { ++ compatible = "spi-gpio"; ++ #address-cells = <0x1>; ++ #size-cells = <0x0>; ++ gpio-sck = <&gpio0 8 GPIO_ACTIVE_HIGH>; ++ gpio-miso = <&gpio0 10 GPIO_ACTIVE_HIGH>; ++ gpio-mosi = <&gpio0 11 GPIO_ACTIVE_HIGH>; ++ cs-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; ++ num-chipselects = <1>; ++ ++ spidev: spidev@0 { ++ compatible = "spidev", "spi-gpio"; ++ reg = <0>; ++ spi-max-frequency = <25000000>; ++ spi-cpha; ++ spi-cpol; ++ }; ++ }; ++ ++ spi_gpio_can { ++ compatible = "spi-gpio"; ++ #address-cells = <0x1>; ++ #size-cells = <0x0>; ++ gpio-sck = <&gpio1 2 GPIO_ACTIVE_HIGH>; ++ gpio-miso = <&gpio1 3 GPIO_ACTIVE_HIGH>; ++ gpio-mosi = <&gpio1 1 GPIO_ACTIVE_HIGH>; ++ cs-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH ++ &gpio1 4 GPIO_ACTIVE_HIGH>; ++ num-chipselects = <2>; ++ ++ spican0: spidev@0 { ++ compatible = "microchip,mcp2515"; ++ reg = <0>; ++ clocks = <&excan_ref_clk>; ++ interrupt-parent = <&gpio0>; ++ interrupts = <15 GPIO_ACTIVE_LOW>; ++ spi-max-frequency = <10000000>; ++ }; ++ spican1: spidev@1 { ++ compatible = "microchip,mcp2515"; ++ reg = <1>; ++ clocks = <&excan_ref_clk>; ++ interrupt-parent = <&gpio1>; ++ interrupts = <5 GPIO_ACTIVE_LOW>; ++ spi-max-frequency = <10000000>; ++ }; ++ }; ++}; ++ ++&pfc { ++ hscif4_pins: hscif4 { ++ groups = "hscif4_data_a", "hscif4_ctrl"; ++ function = "hscif4"; ++ }; ++ ++ /delete-node/sound; ++ ++ sound_0_pins: sound1 { ++ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; ++ function = "ssi"; ++ }; ++ ++ usb0_pins: usb0 { ++ groups = "usb0"; ++ function = "usb0"; ++ }; ++ ++ usb2_pins: usb2 { ++ groups = "usb2"; ++ function = "usb2"; ++ }; ++ ++ can0_pins: can0 { ++ groups = "can0_data_a"; ++ function = "can0"; ++ }; ++ ++ can1_pins: can1 { ++ groups = "can1_data"; ++ function = "can1"; ++ }; ++ ++ canfd0_pins: canfd0 { ++ groups = "canfd0_data_a"; ++ function = "canfd0"; ++ }; ++ ++ canfd1_pins: canfd1 { ++ groups = "canfd1_data"; ++ function = "canfd1"; ++ }; ++ ++ sdhi3_pins: sd3 { ++ groups = "sdhi3_data4", "sdhi3_ctrl"; ++ function = "sdhi3"; ++ power-source = <3300>; ++ }; ++ ++ sdhi3_pins_uhs: sd3_uhs { ++ groups = "sdhi3_data4", "sdhi3_ctrl"; ++ function = "sdhi3"; ++ power-source = <1800>; ++ }; ++}; ++ ++&gpio0 { ++ video_a_irq { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A irq"; ++ }; ++ ++ video_b_irq { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B irq"; ++ }; ++ ++ video_c_irq { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-C irq"; ++ }; ++}; ++ ++&gpio1 { ++ gpioext_4_22_irq { ++ gpio-hog; ++ gpios = <25 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "0x22@i2c4 irq"; ++ }; ++ m2_0_sleep { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "M2 0 SLEEP#"; ++ }; ++ m2_1_sleep { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "M2 1 SLEEP#"; ++ }; ++ m2_0_pcie_det { ++ gpio-hog; ++ gpios = <18 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "M.2 0 PCIe/SATA"; ++ }; ++ m2_1_pcie_det { ++ gpio-hog; ++ gpios = <19 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "M.2 1 PCIe/SATA"; ++ }; ++ m2_1_rst { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "M.2 1 RST#"; ++ }; ++ switch_ext_phy_reset { ++ gpio-hog; ++ gpios = <16 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "BR ext phy reset"; ++ }; ++ switch_sw_reset { ++ gpio-hog; ++ gpios = <17 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "BR switch reset"; ++ }; ++ switch_1v2_en { ++ gpio-hog; ++ gpios = <27 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "BR 1.2V en"; ++ }; ++}; ++ ++&gpio2 { ++ m2_0_wake { ++ gpio-hog; ++ gpios = <1 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "M.2 0 WAKE#"; ++ }; ++ m2_0_clkreq { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "M.2 0 CLKREQ#"; ++ }; ++ switch_3v3_en { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "BR 3.3V en"; ++ }; ++}; ++ ++&gpio3 { ++ switch_int_phy_reset { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "BR int phy reset"; ++ }; ++}; ++ ++&gpio5 { ++ switch_2v5_en { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "BR 2.5V en"; ++ }; ++ switch_25mhz_en { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "BR 25MHz clk en"; ++ }; ++}; ++ ++&gpio6 { ++ m2_1_wake { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "M.2 1 WAKE#"; ++ }; ++ m2_1_clkreq { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "M.2 1 CLKREQ#"; ++ }; ++ ++ m2_0_rst { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "M.2 0 RST#"; ++ }; ++}; ++ ++&i2c2 { ++ clock-frequency = <400000>; ++ ++ i2cswitch2: pca9548@74 { ++ compatible = "nxp,pca9548"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x74>; ++ reset-gpios = <&gpio6 5 GPIO_ACTIVE_LOW>; ++ ++ i2c@4 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <4>; ++ /* USB3.0 HUB node(s) */ ++ /* addr of TUSB8041 is 100.0100 = 0x44 */ ++ }; ++ ++ i2c@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <1>; ++ /* Slot A (CN10) */ ++ ++ ov106xx@0 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x60>; ++ ++ port@0 { ++ ov106xx_in0: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin0ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ ov106xx_ti964_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep0>; ++ }; ++ ov106xx_ti954_des0ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep0>; ++ }; ++ }; ++ }; ++ ++ ov106xx@1 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x61>; ++ ++ port@0 { ++ ov106xx_in1: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin1ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ ov106xx_ti964_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep1>; ++ }; ++ ov106xx_ti954_des0ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep1>; ++ }; ++ }; ++ }; ++ ++ ov106xx@2 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x62>; ++ ++ port@0 { ++ ov106xx_in2: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin2ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ ov106xx_ti964_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep2>; ++ }; ++ }; ++ }; ++ ++ ov106xx@3 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x63>; ++ ++ port@0 { ++ ov106xx_in3: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin3ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ ov106xx_ti964_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep3>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB964 @ 0x3a */ ++ ti964-ti9x3@0 { ++ compatible = "ti,ti964-ti9x3"; ++ reg = <0x3a>; ++ ti,sensor_delay = <350>; ++ ti,links = <4>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "stp"; ++ ++ port@0 { ++ ti964_des0ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ ti964_des0ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ ti964_des0ep2: endpoint@2 { ++ ti9x3-addr = <0x0e>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ ti964_des0ep3: endpoint@3 { ++ ti9x3-addr = <0x0f>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ ti964_csi0ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB954 @ 0x38 */ ++ ti954-ti9x3@0 { ++ compatible = "ti,ti954-ti9x3"; ++ reg = <0x38>; ++ /* gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; */ ++ ti,sensor_delay = <350>; ++ ti,links = <2>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "stp"; ++ ++ port@0 { ++ ti954_des0ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ ti954_des0ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ }; ++ port@1 { ++ ti954_csi0ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ ++ /* MAX9286 @ 0x2c */ ++ max9286@0 { ++ compatible = "maxim,max9286"; ++ reg = <0x2c>; ++ maxim,sensor_delay = <350>; ++ maxim,links = <4>; ++ maxim,lanes = <4>; ++ maxim,resetb-gpio = <1>; ++ maxim,fsync-mode = "automatic"; ++ maxim,timeout = <100>; ++ ++ port@0 { ++ max9286_des0ep0: endpoint@0 { ++ max9271-addr = <0x50>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ max9286_des0ep1: endpoint@1 { ++ max9271-addr = <0x51>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ max9286_des0ep2: endpoint@2 { ++ max9271-addr = <0x52>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ max9286_des0ep3: endpoint@3 { ++ max9271-addr = <0x53>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ max9286_csi0ep0: endpoint { ++ csi-rate = <700>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ }; ++ ++ i2c@3 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <3>; ++ /* Slot B (CN11) */ ++ ++ ov106xx@4 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x64>; ++ ++ port@0 { ++ ov106xx_in4: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin4ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep0>; ++ }; ++ ov106xx_ti964_des1ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep0>; ++ }; ++ ov106xx_ti954_des1ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep0>; ++ }; ++ }; ++ }; ++ ++ ov106xx@5 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x65>; ++ ++ port@0 { ++ ov106xx_in5: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin5ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep1>; ++ }; ++ ov106xx_ti964_des1ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep1>; ++ }; ++ ov106xx_ti954_des1ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep1>; ++ }; ++ }; ++ }; ++ ++ ov106xx@6 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x66>; ++ ++ port@0 { ++ ov106xx_in6: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin6ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep2>; ++ }; ++ ov106xx_ti964_des1ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep2>; ++ }; ++ }; ++ }; ++ ++ ov106xx@7 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x67>; ++ ++ port@0 { ++ ov106xx_in7: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin7ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep3>; ++ }; ++ ov106xx_ti964_des1ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep3>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB964 @ 0x3a */ ++ ti964-ti9x3@1 { ++ compatible = "ti,ti964-ti9x3"; ++ reg = <0x3a>; ++ ti,sensor_delay = <350>; ++ ti,links = <4>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "stp"; ++ ++ port@0 { ++ ti964_des1ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in4>; ++ }; ++ ti964_des1ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in5>; ++ }; ++ ti964_des1ep2: endpoint@2 { ++ ti9x3-addr = <0x0e>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in6>; ++ }; ++ ti964_des1ep3: endpoint@3 { ++ ti9x3-addr = <0x0f>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in7>; ++ }; ++ }; ++ port@1 { ++ ti964_csi2ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB954 @ 0x38 */ ++ ti954-ti9x3@1 { ++ compatible = "ti,ti954-ti9x3"; ++ reg = <0x38>; ++ /* gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>; */ ++ ti,sensor_delay = <350>; ++ ti,links = <2>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "stp"; ++ ++ port@0 { ++ ti954_des1ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in4>; ++ }; ++ ti954_des1ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in5>; ++ }; ++ }; ++ port@1 { ++ ti954_csi2ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ }; ++ ++ /* MAX9286 @ 0x2c */ ++ max9286@1 { ++ compatible = "maxim,max9286"; ++ reg = <0x2c>; ++ maxim,sensor_delay = <350>; ++ maxim,links = <4>; ++ maxim,lanes = <4>; ++ maxim,resetb-gpio = <1>; ++ maxim,fsync-mode = "automatic"; ++ maxim,timeout = <100>; ++ ++ port@0 { ++ max9286_des1ep0: endpoint@0 { ++ max9271-addr = <0x50>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in4>; ++ }; ++ max9286_des1ep1: endpoint@1 { ++ max9271-addr = <0x51>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in5>; ++ }; ++ max9286_des1ep2: endpoint@2 { ++ max9271-addr = <0x52>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in6>; ++ }; ++ max9286_des1ep3: endpoint@3 { ++ max9271-addr = <0x53>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in7>; ++ }; ++ }; ++ port@1 { ++ max9286_csi2ep0: endpoint { ++ csi-rate = <700>; ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ }; ++ }; ++ ++ i2c@7 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <7>; ++ /* Slot C (CN12) */ ++ }; ++ ++ i2c@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ /* Slot A (CN10) */ ++ ++ video_a_ext0: pca9535@26 { ++ compatible = "nxp,pca9535"; ++ reg = <0x26>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_a_des_cfg1 { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg1"; ++ }; ++ video_a_des_cfg0 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg0"; ++ }; ++ video_a_pwr_shdn { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR_SHDN"; ++ }; ++ video_a_cam_pwr0 { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR0"; ++ }; ++ video_a_cam_pwr1 { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR1"; ++ }; ++ video_a_cam_pwr2 { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR2"; ++ }; ++ video_a_cam_pwr3 { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR3"; ++ }; ++ video_a_des_shdn { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A DES_SHDN"; ++ }; ++ video_a_des_led { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A led"; ++ }; ++ }; ++ ++ video_a_ext1: max7325@5c { ++ compatible = "maxim,max7325"; ++ reg = <0x5c>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_a_des_cfg2 { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg2"; ++ }; ++ video_a_des_cfg1 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg1"; ++ }; ++ video_a_des_cfg0 { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg0"; ++ }; ++ video_a_pwr_shdn { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR_SHDN"; ++ }; ++ video_a_cam_pwr0 { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR0"; ++ }; ++ video_a_cam_pwr1 { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR1"; ++ }; ++ video_a_cam_pwr2 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR2"; ++ }; ++ video_a_cam_pwr3 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR3"; ++ }; ++ video_a_des_shdn { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A DES_SHDN"; ++ }; ++ video_a_led { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A LED"; ++ }; ++ }; ++ }; ++ ++ i2c@2 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <2>; ++ /* Slot B (CN11) */ ++ ++ video_b_ext0: pca9535@26 { ++ compatible = "nxp,pca9535"; ++ reg = <0x26>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_b_des_cfg1 { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B cfg1"; ++ }; ++ video_b_des_cfg0 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B cfg0"; ++ }; ++ video_b_pwr_shdn { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR_SHDN"; ++ }; ++ video_b_cam_pwr0 { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR0"; ++ }; ++ video_b_cam_pwr1 { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR1"; ++ }; ++ video_b_cam_pwr2 { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR2"; ++ }; ++ video_b_cam_pwr3 { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR3"; ++ }; ++ video_b_des_shdn { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B DES_SHDN"; ++ }; ++ video_b_des_led { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B led"; ++ }; ++ }; ++ ++ video_b_ext1: max7325@5c { ++ compatible = "maxim,max7325"; ++ reg = <0x5c>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_b_des_cfg2 { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B cfg2"; ++ }; ++ video_b_des_cfg1 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B cfg1"; ++ }; ++ video_b_des_cfg0 { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B cfg0"; ++ }; ++ video_b_pwr_shdn { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR_SHDN"; ++ }; ++ video_b_cam_pwr0 { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR0"; ++ }; ++ video_b_cam_pwr1 { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR1"; ++ }; ++ video_b_cam_pwr2 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR2"; ++ }; ++ video_b_cam_pwr3 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR3"; ++ }; ++ video_b_des_shdn { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B DES_SHDN"; ++ }; ++ video_b_led { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B LED"; ++ }; ++ }; ++ }; ++ ++ i2c@5 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <5>; ++ /* Slot C (CN12) */ ++ }; ++ }; ++}; ++ ++&i2c4 { ++ i2cswitch4: pca9548@74 { ++ compatible = "nxp,pca9548"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x74>; ++ reset-gpios= <&gpio5 15 GPIO_ACTIVE_LOW>; ++ ++ i2c@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ /* FAN1 node - lm96063 */ ++ fan_ctrl_1:lm96063-1@4c { ++ compatible = "lm96163"; ++ reg = <0x4c>; ++ }; ++ }; ++ ++ i2c@6 { ++ /* FAN2 */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <6>; ++ /* FAN2 node - lm96063 */ ++ fan_ctrl_2:lm96063-2@4c { ++ compatible = "lm96163"; ++ reg = <0x4c>; ++ }; ++ }; ++ ++ i2c@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <1>; ++ ++ /* Power nodes - 2 x TPS544x20 */ ++ tps_5v: tps544c20@0x2a { ++ compatible = "tps544c20"; ++ reg = <0x2c>; ++ status = "disabled"; ++ }; ++ tps_3v3: tps544c20@0x22 { ++ compatible = "tps544c20"; ++ reg = <0x24>; ++ status = "disabled"; ++ }; ++ }; ++ ++ i2c@2 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <2>; ++ /* CAN and power board nodes */ ++ ++ gpio_ext_pwr: pca9535@22 { ++ compatible = "nxp,pca9535"; ++ reg = <0x22>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio1>; ++ interrupts = <25 IRQ_TYPE_EDGE_FALLING>; ++ ++ /* enable input DCDC after wake-up signal released */ ++ pwr_hold { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "pwr_hold"; ++ }; ++ pwr_5v_out { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "pwr_5v_out"; ++ }; ++ pwr_5v_oc { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "pwr_5v_oc"; ++ }; ++ pwr_wake8 { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "wake8"; ++ }; ++ pwr_wake7 { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "wake7"; ++ }; ++ ++ /* CAN0 */ ++ can0_stby { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can0_stby"; ++ }; ++ can0_load { ++ gpio-hog; ++ gpios = <0 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can0_120R_load"; ++ }; ++ /* CAN1 */ ++ can1_stby { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can1_stby"; ++ }; ++ can1_load { ++ gpio-hog; ++ gpios = <1 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can1_120R_load"; ++ }; ++ /* CAN2 */ ++ can2_stby { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can2_stby"; ++ }; ++ can2_load { ++ gpio-hog; ++ gpios = <2 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can2_120R_load"; ++ }; ++ can2_rst { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "can2_rst"; ++ }; ++ /* CAN3 */ ++ can3_stby { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can3_stby"; ++ }; ++ can3_load { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "can3_120R_load"; ++ }; ++ can3_rst { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "can3_rst"; ++ }; ++ }; ++ rtc@68 { ++ compatible = "dallas,ds1338"; ++ reg = <0x68>; ++ }; ++ }; ++ ++ i2c@3 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <3>; ++ /* FPDLink output node - DS90UH947 */ ++ }; ++ ++ i2c@4 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <4>; ++ /* BCM switch node */ ++ }; ++ ++ i2c@5 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <5>; ++ /* LED board node(s) */ ++ ++ gpio_ext_led: pca9535@22 { ++ compatible = "nxp,pca9535"; ++ reg = <0x22>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ /* gpios 0..7 are used for indication LEDs, low-active */ ++ }; ++ }; ++ ++ /* port 7 is not used */ ++ }; ++}; ++ ++&pcie_bus_clk { ++ clock-frequency = <100000000>; ++ status = "okay"; ++}; ++ ++&pciec0 { ++ status = "okay"; ++}; ++ ++&pciec1 { ++ status = "okay"; ++}; ++ ++&vin0 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin0ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ }; ++ port@1 { ++ csi0ep0: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin0_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ vin0_ti964_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep0>; ++ }; ++ vin0_ti954_des0ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep0>; ++ }; ++ }; ++ }; ++}; ++ ++&vin1 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin1ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <1>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ }; ++ port@1 { ++ csi0ep1: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin1_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ vin1_ti964_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep1>; ++ }; ++ vin1_ti954_des0ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep1>; ++ }; ++ }; ++ }; ++}; ++ ++&vin2 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin2ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <2>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ }; ++ port@1 { ++ csi0ep2: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin2_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ vin2_ti964_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep2>; ++ }; ++ }; ++ }; ++}; ++ ++&vin3 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin3ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <3>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ csi0ep3: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin3_max9286_des0ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ vin3_ti964_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep3>; ++ }; ++ }; ++ }; ++}; ++ ++&vin4 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin4ep0: endpoint { ++ csi,select = "csi41"; ++ virtual,channel = <0>; ++ remote-endpoint = <&ov106xx_in4>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep0: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin4_max9286_des1ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep0>; ++ }; ++ vin4_ti964_des1ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep0>; ++ }; ++ vin4_ti954_des1ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep0>; ++ }; ++ }; ++ }; ++}; ++ ++&vin5 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin5ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <1>; ++ remote-endpoint = <&ov106xx_in5>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep1: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin5_max9286_des1ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep1>; ++ }; ++ vin5_ti964_des1ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep1>; ++ }; ++ vin5_ti954_des1ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep1>; ++ }; ++ }; ++ }; ++}; ++ ++&vin6 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin6ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <2>; ++ remote-endpoint = <&ov106xx_in6>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep2: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin6_max9286_des1ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep2>; ++ }; ++ vin6_ti964_des1ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep2>; ++ }; ++ }; ++ }; ++}; ++ ++&vin7 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin7ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <3>; ++ remote-endpoint = <&ov106xx_in7>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep3: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin7_max9286_des1ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep3>; ++ }; ++ vin7_ti964_des1ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep3>; ++ }; ++ }; ++ }; ++}; ++ ++&csi2_40 { ++ status = "okay"; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "ycbcr422"; ++ receive,vc = <0>; ++ }; ++ csi2_vc1 { ++ data,type = "ycbcr422"; ++ receive,vc = <1>; ++ }; ++ csi2_vc2 { ++ data,type = "ycbcr422"; ++ receive,vc = <2>; ++ }; ++ csi2_vc3 { ++ data,type = "ycbcr422"; ++ receive,vc = <3>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_40_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ csi-rate = <300>; ++ }; ++ }; ++}; ++ ++&csi2_41 { ++ status = "okay"; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "ycbcr422"; ++ receive,vc = <0>; ++ }; ++ csi2_vc1 { ++ data,type = "ycbcr422"; ++ receive,vc = <1>; ++ }; ++ csi2_vc2 { ++ data,type = "ycbcr422"; ++ receive,vc = <2>; ++ }; ++ csi2_vc3 { ++ data,type = "ycbcr422"; ++ receive,vc = <3>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_41_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ csi-rate = <300>; ++ }; ++ }; ++}; ++ ++&rcar_sound { ++ pinctrl-0 = <&sound_clk_pins>; ++ ++ /* Multi DAI */ ++ #sound-dai-cells = <1>; ++}; ++ ++&sata { ++ status = "okay"; ++}; ++ ++&ssi1 { ++ /delete-property/shared-pin; ++}; ++ ++&sdhi3 { ++ pinctrl-0 = <&sdhi3_pins>; ++ pinctrl-1 = <&sdhi3_pins_uhs>; ++ pinctrl-names = "default", "state_uhs"; ++ ++ vmmc-supply = <&vcc_sdhi3>; ++ vqmmc-supply = <&vccq_sdhi3>; ++ cd-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; ++ wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; ++ bus-width = <4>; ++ sd-uhs-sdr50; ++ status = "okay"; ++}; ++ ++&msiof1 { ++ status = "disabled"; ++}; ++ ++&usb2_phy0 { ++ pinctrl-0 = <&usb0_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++}; ++ ++&usb2_phy2 { ++ pinctrl-0 = <&usb2_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++}; ++ ++&xhci0 { ++ status = "okay"; ++}; ++ ++&ehci0 { ++ status = "okay"; ++}; ++ ++&ehci2 { ++ status = "okay"; ++}; ++ ++&ohci0 { ++ status = "okay"; ++}; ++ ++&ohci2 { ++ status = "okay"; ++}; ++ ++&can0 { ++ pinctrl-0 = <&can0_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ ++ renesas,can-clock-select = <0x0>; ++}; ++ ++&can1 { ++ pinctrl-0 = <&can1_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ ++ renesas,can-clock-select = <0x0>; ++}; ++ ++&canfd { ++ pinctrl-0 = <&canfd0_pins &canfd1_pins>; ++ pinctrl-names = "default"; ++ status = "disabled"; ++ ++ renesas,can-clock-select = <0x0>; ++ ++ channel0 { ++ status = "okay"; ++ }; ++ ++ channel1 { ++ status = "okay"; ++ }; ++}; ++ ++/* uncomment to enable CN12 on VIN4-7 */ ++//#include "ulcb-vb-cn12.dtsi" diff --git a/arch/arm64/boot/dts/renesas/ulcb-vbm.dtsi b/arch/arm64/boot/dts/renesas/ulcb-vbm.dtsi new file mode 100644 index 0000000..7728bdd |