diff options
Diffstat (limited to 'meta-rcar-gen3-adas')
| -rw-r--r-- | meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch | 8065 |
1 files changed, 6627 insertions, 1438 deletions
diff --git a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch index 4983f5a..261afe1 100644 --- a/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch +++ b/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas/0040-arm64-dts-renesas-add-ADAS-boards.patch @@ -19,36 +19,46 @@ Videobox board on R8A7795 SoC Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> --- - arch/arm64/boot/dts/renesas/Makefile | 14 + + arch/arm64/boot/dts/renesas/Makefile | 13 + + arch/arm64/boot/dts/renesas/legacy/Makefile | 7 + + .../renesas/legacy/r8a7795-es1-h3ulcb-kf-v0.dts | 1717 ++++++++++++++++++ + .../renesas/legacy/r8a7795-es1-h3ulcb-kf-v1.dts | 440 +++++ + .../dts/renesas/legacy/r8a7795-h3ulcb-kf-v0.dts | 1720 ++++++++++++++++++ + .../dts/renesas/legacy/r8a7795-h3ulcb-kf-v1.dts | 464 +++++ + .../dts/renesas/legacy/r8a7796-m3ulcb-kf-v0.dts | 1214 +++++++++++++ + .../dts/renesas/legacy/r8a7796-m3ulcb-kf-v1.dts | 464 +++++ .../dts/renesas/r8a7795-es1-h3ulcb-had-alfa.dts | 22 + .../dts/renesas/r8a7795-es1-h3ulcb-had-beta.dts | 23 + .../boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi | 225 +++ - .../boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts | 445 +++++ - .../boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts | 1707 +++++++++++++++++++ - .../boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts | 1787 ++++++++++++++++++++ + .../boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts | 1910 ++++++++++++++++++++ + .../boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts | 1787 ++++++++++++++++++ .../boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts | 546 ++++++ .../dts/renesas/r8a7795-es1-salvator-x-view.dts | 552 ++++++ .../boot/dts/renesas/r8a7795-h3ulcb-had-alfa.dts | 22 + .../boot/dts/renesas/r8a7795-h3ulcb-had-beta.dts | 23 + .../arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi | 219 +++ - .../boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts | 469 +++++ - arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts | 1712 +++++++++++++++++++ - arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts | 1787 ++++++++++++++++++++ + arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts | 1906 +++++++++++++++++++ + arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts | 1787 ++++++++++++++++++ .../arm64/boot/dts/renesas/r8a7795-h3ulcb-view.dts | 546 ++++++ .../boot/dts/renesas/r8a7795-salvator-x-view.dts | 552 ++++++ - .../boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts | 469 +++++ - arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts | 1284 ++++++++++++++ - .../arm64/boot/dts/renesas/r8a7796-m3ulcb-view.dts | 287 ++++ + arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts | 1400 ++++++++++++++ + .../arm64/boot/dts/renesas/r8a7796-m3ulcb-view.dts | 287 +++ .../boot/dts/renesas/r8a7796-salvator-x-view.dts | 318 ++++ arch/arm64/boot/dts/renesas/ulcb-kf-cmos.dtsi | 75 + - arch/arm64/boot/dts/renesas/ulcb-kf-rpi.dtsi | 75 + + arch/arm64/boot/dts/renesas/ulcb-kf-rpi.dtsi | 77 + arch/arm64/boot/dts/renesas/ulcb-kf-sd3.dtsi | 44 + arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi | 515 ++++++ - 25 files changed, 13718 insertions(+) + 29 files changed, 18875 insertions(+) + create mode 100644 arch/arm64/boot/dts/renesas/legacy/Makefile + create mode 100644 arch/arm64/boot/dts/renesas/legacy/r8a7795-es1-h3ulcb-kf-v0.dts + create mode 100644 arch/arm64/boot/dts/renesas/legacy/r8a7795-es1-h3ulcb-kf-v1.dts + create mode 100644 arch/arm64/boot/dts/renesas/legacy/r8a7795-h3ulcb-kf-v0.dts + create mode 100644 arch/arm64/boot/dts/renesas/legacy/r8a7795-h3ulcb-kf-v1.dts + create mode 100644 arch/arm64/boot/dts/renesas/legacy/r8a7796-m3ulcb-kf-v0.dts + create mode 100644 arch/arm64/boot/dts/renesas/legacy/r8a7796-m3ulcb-kf-v1.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-alfa.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-beta.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi - create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-view.dts @@ -56,12 +66,10 @@ Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-alfa.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had-beta.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-had.dtsi - create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-view.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-salvator-x-view.dts - create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-view.dts create mode 100644 arch/arm64/boot/dts/renesas/r8a7796-salvator-x-view.dts @@ -71,37 +79,49 @@ Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> create mode 100644 arch/arm64/boot/dts/renesas/ulcb-vb-cn12.dtsi diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile -index 32fb4d9..c9b3e96 100644 +index 32fb4d9..9bb5848 100644 --- a/arch/arm64/boot/dts/renesas/Makefile +++ b/arch/arm64/boot/dts/renesas/Makefile -@@ -4,5 +4,19 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb r8a7795-es1-h3ulcb.dtb +@@ -4,5 +4,18 @@ dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x.dtb r8a7795-es1-h3ulcb.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x.dtb r8a7796-m3ulcb.dtb dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-xs.dtb +# ADAS boards -+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-salvator-x-view.dtb -+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-view.dtb -+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-had-alfa.dtb r8a7795-es1-h3ulcb-had-beta.dtb -+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-kf.dtb r8a7795-es1-h3ulcb-kf-v1.dtb +dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-salvator-x-view.dtb +dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-view.dtb -+dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb r8a7796-m3ulcb-kf-v1.dtb -+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x-view.dtb -+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-view.dtb -+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-had-alfa.dtb r8a7795-h3ulcb-had-beta.dtb -+dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb r8a7795-h3ulcb-kf-v1.dtb ++dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf.dtb ++dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x-view.dtb r8a7795-es1-salvator-x-view.dtb ++dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-view.dtb r8a7795-es1-h3ulcb-view.dtb ++dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-had-alfa.dtb r8a7795-h3ulcb-had-beta.dtb r8a7795-es1-h3ulcb-had-alfa.dtb r8a7795-es1-h3ulcb-had-beta.dtb ++dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb r8a7795-es1-h3ulcb-kf.dtb +dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-vb.dtb r8a7795-es1-h3ulcb-vb.dtb + ++# ADAS legacy boards ++subdir-y := legacy ++ always := $(dtb-y) clean-files := *.dtb -diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-alfa.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-alfa.dts +diff --git a/arch/arm64/boot/dts/renesas/legacy/Makefile b/arch/arm64/boot/dts/renesas/legacy/Makefile new file mode 100644 -index 0000000..6b13f07 +index 0000000..f7de935 --- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-alfa.dts -@@ -0,0 +1,22 @@ ++++ b/arch/arm64/boot/dts/renesas/legacy/Makefile +@@ -0,0 +1,7 @@ ++# Legacy KF board: V0, V1 (V2 is the same as V1), V3 is latest and deployed in default directory ++dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-es1-h3ulcb-kf-v0.dtb r8a7795-es1-h3ulcb-kf-v1.dtb ++dtb-$(CONFIG_ARCH_R8A7796) += r8a7796-m3ulcb-kf-v0.dtb r8a7796-m3ulcb-kf-v1.dtb ++dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf-v0.dtb r8a7795-h3ulcb-kf-v1.dtb ++ ++always := $(dtb-y) ++clean-files := *.dtb +diff --git a/arch/arm64/boot/dts/renesas/legacy/r8a7795-es1-h3ulcb-kf-v0.dts b/arch/arm64/boot/dts/renesas/legacy/r8a7795-es1-h3ulcb-kf-v0.dts +new file mode 100644 +index 0000000..b3ac95aa4 +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/legacy/r8a7795-es1-h3ulcb-kf-v0.dts +@@ -0,0 +1,1717 @@ +/* -+ * Device Tree Source for the H3ULCB.HAD board Alfa side on r8a7795 ES1.x ++ * Device Tree Source for the H3ULCB Kingfisher V0 board on r8a7795 ES1.x + * + * Copyright (C) 2017 Renesas Electronics Corp. + * Copyright (C) 2017 Cogent Embedded, Inc. @@ -111,25 +131,1720 @@ index 0000000..6b13f07 + * kind, whether express or implied. + */ + -+#include "r8a7795-es1-h3ulcb-had.dtsi" ++#include "../r8a7795-es1-h3ulcb.dts" + +/ { -+ model = "Renesas H3ULCB.HAD board Alfa side based on r8a7795"; ++ model = "Renesas H3ULCB Kingfisher V0 board based on r8a7795"; ++ ++ aliases { ++ serial1 = &hscif4; ++ }; ++ ++ snd_clk: snd_clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <24576000>; ++ clock-output-names = "scki"; ++ }; ++ ++ wlan_en: regulator@4 { ++ compatible = "regulator-fixed"; ++ regulator-name = "wlan-en-regulator"; ++ ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_20 4 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ }; ++ ++ vcc_sdhi3: regulator@41 { ++ compatible = "regulator-fixed"; ++ ++ regulator-name = "SDHI3 Vcc"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ ++ vccq_sdhi3: regulator@5 { ++ compatible = "regulator-fixed"; ++ ++ regulator-name = "SDHI3 VccQ"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ }; ++ ++ codec_en_reg: regulator@6 { ++ compatible = "regulator-fixed"; ++ regulator-name = "codec-en-regulator"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_20 15 0>; ++ ++ /* delay - CHECK */ ++ startup-delay-us = <70000>; ++ enable-active-high; ++ }; ++ ++ amp_en_reg: regulator@7 { ++ compatible = "regulator-fixed"; ++ regulator-name = "amp-en-regulator"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_20 0 0>; ++ ++ startup-delay-us = <0>; ++ enable-active-high; ++ }; ++ ++ lvds_switch: regulator@8 { ++ compatible = "regulator-fixed"; ++ regulator-name = "lvds_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio1 24 0>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ sdio_switch: regulator@9 { ++ compatible = "regulator-fixed"; ++ regulator-name = "wifi_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_20 5 0>; ++ enable-active-low; ++ regulator-always-on; ++ }; ++ ++ sound_switch: regulator@10 { ++ compatible = "regulator-fixed"; ++ regulator-name = "pcm3168a_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_21 5 0>; ++ enable-active-low; ++ regulator-always-on; ++ }; ++ ++ radio_switch: regulator@11 { ++ compatible = "regulator-fixed"; ++ regulator-name = "radio_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_20 13 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ kim { ++ compatible = "kim"; ++ nshutdown_gpio = <343>; /* pca9535@i2c2.0x20 pin 3 */ ++ /* serial1 */ ++ dev_name = "/dev/ttySC1"; ++ flow_cntrl = <1>; ++ /* int div 8 hscif@26.6666656MHz */ ++ baud_rate = <3333332>; ++ }; ++ ++ btwilink { ++ compatible = "btwilink"; ++ }; ++ ++ sound_ext: sound@0 { ++ pinctrl-0 = <&sound_0_pins>; ++ pinctrl-names = "default"; ++ compatible = "simple-audio-card"; ++ ++ simple-audio-card,format = "left_j"; ++ simple-audio-card,name = "pcm3168a"; ++ ++ simple-audio-card,bitclock-master = <&sound_ext_master>; ++ simple-audio-card,frame-master = <&sound_ext_master>; ++ sound_ext_master: simple-audio-card,cpu@0 { ++ sound-dai = <&rcar_sound 0>; ++ dai-tdm-slot-num = <8>; ++ dai-tdm-slot-width = <32>; ++ }; ++ ++ simple-audio-card,codec@0 { ++ sound-dai = <&pcm3168a>; ++ dai-tdm-slot-num = <8>; ++ dai-tdm-slot-width = <32>; ++ system-clock-frequency = <24576000>; ++ }; ++ }; ++ ++ /delete-node/sound; ++ ++ rsnd_ak4613: sound@1 { ++ pinctrl-0 = <&sound_1_pins>; ++ pinctrl-names = "default"; ++ compatible = "simple-audio-card"; ++ ++ simple-audio-card,format = "left_j"; ++ simple-audio-card,name = "ak4613"; ++ ++ simple-audio-card,bitclock-master = <&sndcpu>; ++ simple-audio-card,frame-master = <&sndcpu>; ++ ++ sndcpu: simple-audio-card,cpu@1 { ++ sound-dai = <&rcar_sound 1>; ++ }; ++ ++ sndcodec: simple-audio-card,codec@1 { ++ sound-dai = <&ak4613>; ++ }; ++ }; ++ ++ sound_radio: sound@2 { ++ pinctrl-0 = <&sound_2_pins>; ++ pinctrl-names = "default"; ++ compatible = "simple-audio-card"; ++ ++ simple-audio-card,format = "i2s"; ++ simple-audio-card,name = "radio"; ++ ++ simple-audio-card,bitclock-master = <&sound_radio_master>; ++ simple-audio-card,frame-master = <&sound_radio_master>; ++ simple-audio-card,cpu@2 { ++ sound-dai = <&rcar_sound 2>; ++ }; ++ ++ sound_radio_master: simple-audio-card,codec@2 { ++ sound-dai = <&radio>; ++ system-clock-frequency = <12288000>; ++ }; ++ }; ++ ++ lvds-encoder { ++ compatible = "thine,thc63lvdm83d"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ port@0 { ++ reg = <0>; ++ lvds_enc_in: endpoint { ++ remote-endpoint = <&du_out_lvds0>; ++ }; ++ }; ++ port@1 { ++ reg = <1>; ++ lvds_enc_out: endpoint { ++ remote-endpoint = <&lvds_in>; ++ }; ++ }; ++ }; ++ }; ++ ++ lvds { ++ compatible = "lvds-connector"; ++ ++ width-mm = <210>; ++ height-mm = <158>; ++ ++ panel-timing { ++ /* 1280x800 @60Hz */ ++ clock-frequency = <65000000>; ++ hactive = <1280>; ++ vactive = <800>; ++ hsync-len = <40>; ++ hfront-porch = <80>; ++ hback-porch = <40>; ++ vfront-porch = <14>; ++ vback-porch = <14>; ++ vsync-len = <4>; ++ }; ++ ++ port { ++ lvds_in: endpoint { ++ remote-endpoint = <&lvds_enc_out>; ++ }; ++ }; ++ }; ++ ++ radio: si468x@0 { ++ compatible = "si,si468x-pcm"; ++ status = "okay"; ++ ++ #sound-dai-cells = <0>; ++ }; ++}; ++ ++&pfc { ++ hscif4_pins: hscif4 { ++ groups = "hscif4_data_a", "hscif4_ctrl"; ++ function = "hscif4"; ++ }; ++ ++ sdhi3_pins_3v3: sd3_3v3 { ++ groups = "sdhi3_data4", "sdhi3_ctrl"; ++ function = "sdhi3"; ++ power-source = <3300>; ++ }; ++ ++ sound_0_pins: sound0 { ++ groups = "ssi78_ctrl", "ssi7_data", "ssi8_data"; ++ function = "ssi"; ++ }; ++ ++ sound_1_pins: sound1 { ++ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; ++ function = "ssi"; ++ }; ++ ++ sound_2_pins: sound2 { ++ groups = "ssi6_ctrl", "ssi6_data"; ++ function = "ssi"; ++ }; ++ ++ usb0_pins: usb0 { ++ groups = "usb0"; ++ function = "usb0"; ++ }; ++ ++ can0_pins: can0 { ++ groups = "can0_data_a"; ++ function = "can0"; ++ }; ++ ++ can1_pins: can1 { ++ groups = "can1_data"; ++ function = "can1"; ++ }; ++ ++ canfd0_pins: canfd0 { ++ groups = "canfd0_data_a"; ++ function = "canfd0"; ++ }; ++ ++ canfd1_pins: canfd1 { ++ groups = "canfd1_data"; ++ function = "canfd1"; ++ }; ++}; ++ ++&du { ++ ports { ++ port@3 { ++ endpoint { ++ remote-endpoint = <&lvds_enc_in>; ++ }; ++ }; ++ }; ++}; ++ ++&gpio0 { ++ video_a_irq { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A irq"; ++ }; ++ ++ video_b_irq { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B irq"; ++ }; ++ ++ gpioext_2_20_irq { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "0x20@i2c2 irq"; ++ }; ++}; ++ ++&gpio1 { ++ gpioext_2_21_irq { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "0x21@i2c2 irq"; ++ }; ++ ++ wifi_irq { ++ gpio-hog; ++ gpios = <25 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "wifi irq"; ++ }; ++}; ++ ++&gpio5 { ++ touch_irq { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "touch irq"; ++ }; ++ ++ /* From TI forum */ ++ /* BT_AUD_OUT should be pulled low when WL_EN is activated. */ ++ /* in case it isn't, wilink8 ends up in one of the test modes that introduces various issues */ ++ bt_strap { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "BT strap pin"; ++ }; ++}; ++ ++&gpio7 { ++ gpioext_2_21_irq { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "0x21@i2c4 irq"; ++ }; ++}; ++ ++&hscif4 { ++ pinctrl-0 = <&hscif4_pins>; ++ pinctrl-names = "default"; ++ uart-has-rtscts; ++ ++ status = "okay"; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++ ++ gpio_ext_20: pca9535@20 { ++ compatible = "nxp,pca9535"; ++ reg = <0x20>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio0>; ++ interrupts = <15 IRQ_TYPE_EDGE_FALLING>; ++ }; ++ ++ gpio_ext_21: pca9535@21 { ++ compatible = "nxp,pca9535"; ++ reg = <0x21>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio1>; ++ interrupts = <15 IRQ_TYPE_EDGE_FALLING>; ++ }; ++ ++ i2cswitch2: pca9548@74 { ++ compatible = "nxp,pca9548"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x74>; ++ reset-gpios = <&gpio6 5 GPIO_ACTIVE_LOW>; ++ ++ i2c@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ /* BCM node(s) */ ++ }; ++ ++ i2c@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <1>; ++ /* USB3.0 HUB node(s) */ ++ }; ++ ++ i2c@2 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <2>; ++ /* Power amp node(s) */ ++ }; ++ ++ i2c@3 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <3>; ++ /* Radio node(s) */ ++ }; ++ ++ i2c@4 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <4>; ++ /* A2B node(s) */ ++ }; ++ ++ i2c@5 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <5>; ++ /* PCIe node(s) */ ++ }; ++ ++ i2c@6 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <6>; ++ /* LVDS display node(s) */ ++ ++ polytouch: edt-ft5x06@38 { ++ compatible = "edt,edt-ft5x06"; ++ reg = <0x38>; ++ interrupt-parent = <&gpio5>; ++ interrupts = <6 IRQ_TYPE_EDGE_FALLING>; ++ }; ++ }; ++ ++ i2c@7 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <7>; ++ /* Audio, GPS and Gyro node(s) */ ++ ++ pcm3168a: audio-codec@44 { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm3168a"; ++ reg = <0x44>; ++ clocks = <&snd_clk>; ++ clock-names = "scki"; ++ tdm; ++ VDD1-supply = <&codec_en_reg>; ++ VDD2-supply = <&codec_en_reg>; ++ VCCAD1-supply = <&codec_en_reg>; ++ VCCAD2-supply = <&codec_en_reg>; ++ VCCDA1-supply = <&_en_reg>; ++ VCCDA2-supply = <&_en_reg>; ++ }; ++ ++ lsm9ds0_acc_mag@1d { ++ compatible = "st,lsm9ds0_accel_magn"; ++ reg = <0x1d>; ++ }; ++ ++ lsm9ds0_gyr@6b { ++ compatible = "st,lsm9ds0_gyro"; ++ reg = <0x6b>; ++ }; ++ ++ /* GPS@ 0x42 */ ++ }; ++ }; ++}; ++ ++&i2c4 { ++ gpio_ext_22: pca9535@21 { ++ compatible = "nxp,pca9535"; ++ reg = <0x22>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio7>; ++ interrupts = <3 IRQ_TYPE_EDGE_FALLING>; ++ ++ cmos_pwdn { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "CMOS PWDN"; ++ }; ++ cmos_rst { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "CMOS RST"; ++ }; ++ /* pin 12 - CAM_CLK */ ++ rpi_cam_io_1 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "RaspB_IO1"; ++ }; ++ /* pin 11 - CAM_GPIO - assume pwdn */ ++ rpi_cam_io_0 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "RaspB_IO0"; ++ }; ++ }; ++ ++ i2cswitch4: pca9548@74 { ++ compatible = "nxp,pca9548"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x74>; ++ reset-gpios= <&gpio6 21 GPIO_ACTIVE_LOW>; ++ ++ i2c@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ /* SAM node(s) */ ++ }; ++ ++ i2c@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <1>; ++ /* Slot A (CN10) */ ++ ++ ov106xx@0 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x60>; ++ ++ port@0 { ++ ov106xx_in0: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin0ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ ov106xx_ti964_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep0>; ++ }; ++ ov106xx_ti954_des0ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep0>; ++ }; ++ }; ++ }; ++ ++ ov106xx@1 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x61>; ++ ++ port@0 { ++ ov106xx_in1: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin1ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ ov106xx_ti964_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep1>; ++ }; ++ ov106xx_ti954_des0ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep1>; ++ }; ++ }; ++ }; ++ ++ ov106xx@2 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x62>; ++ ++ port@0 { ++ ov106xx_in2: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin2ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ ov106xx_ti964_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep2>; ++ }; ++ }; ++ }; ++ ++ ov106xx@3 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x63>; ++ ++ port@0 { ++ ov106xx_in3: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin3ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ ov106xx_ti964_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep3>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB964 @ 0x3a */ ++ ti964-ti9x3@0 { ++ compatible = "ti,ti964-ti9x3"; ++ reg = <0x3a>; ++ ti,sensor_delay = <350>; ++ ti,links = <4>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "coax"; ++ ++ port@0 { ++ ti964_des0ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ ti964_des0ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ ti964_des0ep2: endpoint@2 { ++ ti9x3-addr = <0x0e>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ ti964_des0ep3: endpoint@3 { ++ ti9x3-addr = <0x0f>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ ti964_csi0ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB954 @ 0x38 */ ++ ti954-ti9x3@0 { ++ compatible = "ti,ti954-ti9x3"; ++ reg = <0x38>; ++ /* gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; */ ++ ti,sensor_delay = <350>; ++ ti,links = <2>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "coax"; ++ ++ port@0 { ++ ti954_des0ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ ti954_des0ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ }; ++ port@1 { ++ ti954_csi0ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ ++ /* MAX9286 @ 0x2c */ ++ max9286-max9271@0 { ++ compatible = "maxim,max9286-max9271"; ++ reg = <0x2c>; ++ maxim,sensor_delay = <350>; ++ maxim,links = <4>; ++ maxim,lanes = <4>; ++ maxim,resetb-gpio = <1>; ++ maxim,fsync-mode = "automatic"; ++ maxim,timeout = <100>; ++ ++ port@0 { ++ max9286_des0ep0: endpoint@0 { ++ max9271-addr = <0x50>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ max9286_des0ep1: endpoint@1 { ++ max9271-addr = <0x51>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ max9286_des0ep2: endpoint@2 { ++ max9271-addr = <0x52>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ max9286_des0ep3: endpoint@3 { ++ max9271-addr = <0x53>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ max9286_csi0ep0: endpoint { ++ csi-rate = <700>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ }; ++ ++ i2c@2 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <2>; ++ /* Slot B (CN11) */ ++ ++ ov106xx@4 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x64>; ++ ++ port@0 { ++ ov106xx_in4: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin4ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep0>; ++ }; ++ ov106xx_ti964_des1ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep0>; ++ }; ++ ov106xx_ti954_des1ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep0>; ++ }; ++ }; ++ }; ++ ++ ov106xx@5 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x65>; ++ ++ port@0 { ++ ov106xx_in5: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin5ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep1>; ++ }; ++ ov106xx_ti964_des1ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep1>; ++ }; ++ ov106xx_ti954_des1ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep1>; ++ }; ++ }; ++ }; ++ ++ ov106xx@6 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x66>; ++ ++ port@0 { ++ ov106xx_in6: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin6ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep2>; ++ }; ++ ov106xx_ti964_des1ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep2>; ++ }; ++ }; ++ }; ++ ++ ov106xx@7 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x67>; ++ ++ port@0 { ++ ov106xx_in7: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin7ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep3>; ++ }; ++ ov106xx_ti964_des1ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep3>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB964 @ 0x3a */ ++ ti964-ti9x3@1 { ++ compatible = "ti,ti964-ti9x3"; ++ reg = <0x3a>; ++ ti,sensor_delay = <350>; ++ ti,links = <4>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "coax"; ++ ++ port@0 { ++ ti964_des1ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in4>; ++ }; ++ ti964_des1ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in5>; ++ }; ++ ti964_des1ep2: endpoint@2 { ++ ti9x3-addr = <0x0e>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in6>; ++ }; ++ ti964_des1ep3: endpoint@3 { ++ ti9x3-addr = <0x0f>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in7>; ++ }; ++ }; ++ port@1 { ++ ti964_csi2ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB954 @ 0x38 */ ++ ti954-ti9x3@1 { ++ compatible = "ti,ti954-ti9x3"; ++ reg = <0x38>; ++ /* gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>; */ ++ ti,sensor_delay = <350>; ++ ti,links = <2>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "coax"; ++ ++ port@0 { ++ ti954_des1ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in4>; ++ }; ++ ti954_des1ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in5>; ++ }; ++ }; ++ port@1 { ++ ti954_csi2ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ }; ++ ++ /* MAX9286 @ 0x2c */ ++ max9286-max9271@1 { ++ compatible = "maxim,max9286-max9271"; ++ reg = <0x2c>; ++ maxim,sensor_delay = <350>; ++ maxim,links = <4>; ++ maxim,lanes = <4>; ++ maxim,resetb-gpio = <1>; ++ maxim,fsync-mode = "automatic"; ++ maxim,timeout = <100>; ++ ++ port@0 { ++ max9286_des1ep0: endpoint@0 { ++ max9271-addr = <0x50>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in4>; ++ }; ++ max9286_des1ep1: endpoint@1 { ++ max9271-addr = <0x51>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in5>; ++ }; ++ max9286_des1ep2: endpoint@2 { ++ max9271-addr = <0x52>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in6>; ++ }; ++ max9286_des1ep3: endpoint@3 { ++ max9271-addr = <0x53>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in7>; ++ }; ++ }; ++ port@1 { ++ max9286_csi2ep0: endpoint { ++ csi-rate = <700>; ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ }; ++ }; ++ ++ i2c@6 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <6>; ++ /* Slot B (CN11) */ ++ ++ video_b_ext0: pca9535@27 { ++ compatible = "nxp,pca9535"; ++ reg = <0x27>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_b_des_cfg1 { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B cfg1"; ++ }; ++ video_b_des_cfg0 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B cfg0"; ++ }; ++ video_b_pwr_shdn { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR_SHDN"; ++ }; ++ video_b_cam_pwr0 { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR0"; ++ }; ++ video_b_cam_pwr1 { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR1"; ++ }; ++ video_b_cam_pwr2 { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR2"; ++ }; ++ video_b_cam_pwr3 { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR3"; ++ }; ++ video_b_des_shdn { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B DES_SHDN"; ++ }; ++ video_b_des_led { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B led"; ++ }; ++ }; ++ ++ video_b_ext1: max7325@5c { ++ compatible = "maxim,max7325"; ++ reg = <0x5c>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_b_des_cfg2 { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B cfg2"; ++ }; ++ video_b_des_cfg1 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B cfg1"; ++ }; ++ video_b_des_cfg0 { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B cfg0"; ++ }; ++ video_b_pwr_shdn { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR_SHDN"; ++ }; ++ video_b_cam_pwr0 { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR0"; ++ }; ++ video_b_cam_pwr1 { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR1"; ++ }; ++ video_b_cam_pwr2 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR2"; ++ }; ++ video_b_cam_pwr3 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR3"; ++ }; ++ video_b_des_shdn { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B DES_SHDN"; ++ }; ++ video_b_led { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B LED"; ++ }; ++ }; ++ }; ++ ++ i2c@7 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <7>; ++ /* Slot A (CN10) */ ++ ++ video_a_ext0: pca9535@26 { ++ compatible = "nxp,pca9535"; ++ reg = <0x26>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_a_des_cfg1 { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg1"; ++ }; ++ video_a_des_cfg0 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg0"; ++ }; ++ video_a_pwr_shdn { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR_SHDN"; ++ }; ++ video_a_cam_pwr0 { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR0"; ++ }; ++ video_a_cam_pwr1 { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR1"; ++ }; ++ video_a_cam_pwr2 { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR2"; ++ }; ++ video_a_cam_pwr3 { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR3"; ++ }; ++ video_a_des_shdn { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A DES_SHDN"; ++ }; ++ video_a_des_led { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A led"; ++ }; ++ }; ++ ++ video_a_ext1: max7325@5c { ++ compatible = "maxim,max7325"; ++ reg = <0x5c>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_a_des_cfg2 { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg2"; ++ }; ++ video_a_des_cfg1 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg1"; ++ }; ++ video_a_des_cfg0 { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg0"; ++ }; ++ video_a_pwr_shdn { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR_SHDN"; ++ }; ++ video_a_cam_pwr0 { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR0"; ++ }; ++ video_a_cam_pwr1 { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR1"; ++ }; ++ video_a_cam_pwr2 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR2"; ++ }; ++ video_a_cam_pwr3 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR3"; ++ }; ++ video_a_des_shdn { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A DES_SHDN"; ++ }; ++ video_a_led { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A LED"; ++ }; ++ }; ++ }; ++ }; ++}; ++ ++&pcie_bus_clk { ++ clock-frequency = <100000000>; ++ status = "okay"; +}; + +&pciec0 { + status = "okay"; ++}; + -+ /* Root complex */ ++&pciec1 { ++ status = "okay"; +}; -diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-beta.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-beta.dts ++ ++&vin0 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin0ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ }; ++ port@1 { ++ csi0ep0: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin0_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ vin0_ti964_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep0>; ++ }; ++ vin0_ti954_des0ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep0>; ++ }; ++ }; ++ }; ++}; ++ ++&vin1 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin1ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <1>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ }; ++ port@1 { ++ csi0ep1: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin1_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ vin1_ti964_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep1>; ++ }; ++ vin1_ti954_des0ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep1>; ++ }; ++ }; ++ }; ++}; ++ ++&vin2 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin2ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <2>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ }; ++ port@1 { ++ csi0ep2: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin2_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ vin2_ti964_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep2>; ++ }; ++ }; ++ }; ++}; ++ ++&vin3 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin3ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <3>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ csi0ep3: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin3_max9286_des0ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ vin3_ti964_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep3>; ++ }; ++ }; ++ }; ++}; ++ ++&vin4 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin4ep0: endpoint { ++ csi,select = "csi41"; ++ virtual,channel = <0>; ++ remote-endpoint = <&ov106xx_in4>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep0: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin4_max9286_des1ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep0>; ++ }; ++ vin4_ti964_des1ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep0>; ++ }; ++ vin4_ti954_des1ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep0>; ++ }; ++ }; ++ }; ++}; ++ ++&vin5 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin5ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <1>; ++ remote-endpoint = <&ov106xx_in5>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep1: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin5_max9286_des1ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep1>; ++ }; ++ vin5_ti964_des1ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep1>; ++ }; ++ vin5_ti954_des1ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep1>; ++ }; ++ }; ++ }; ++}; ++ ++&vin6 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin6ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <2>; ++ remote-endpoint = <&ov106xx_in6>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep2: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin6_max9286_des1ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep2>; ++ }; ++ vin6_ti964_des1ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep2>; ++ }; ++ }; ++ }; ++}; ++ ++&vin7 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin7ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <3>; ++ remote-endpoint = <&ov106xx_in7>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep3: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin7_max9286_des1ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep3>; ++ }; ++ vin7_ti964_des1ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep3>; ++ }; ++ }; ++ }; ++}; ++ ++&csi2_40 { ++ status = "okay"; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "ycbcr422"; ++ receive,vc = <0>; ++ }; ++ csi2_vc1 { ++ data,type = "ycbcr422"; ++ receive,vc = <1>; ++ }; ++ csi2_vc2 { ++ data,type = "ycbcr422"; ++ receive,vc = <2>; ++ }; ++ csi2_vc3 { ++ data,type = "ycbcr422"; ++ receive,vc = <3>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_40_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ csi-rate = <300>; ++ }; ++ }; ++}; ++ ++&csi2_41 { ++ status = "okay"; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "ycbcr422"; ++ receive,vc = <0>; ++ }; ++ csi2_vc1 { ++ data,type = "ycbcr422"; ++ receive,vc = <1>; ++ }; ++ csi2_vc2 { ++ data,type = "ycbcr422"; ++ receive,vc = <2>; ++ }; ++ csi2_vc3 { ++ data,type = "ycbcr422"; ++ receive,vc = <3>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_41_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ csi-rate = <300>; ++ }; ++ }; ++}; ++ ++&rcar_sound { ++ pinctrl-0 = <&sound_clk_pins>; ++ ++ /* Multi DAI */ ++ #sound-dai-cells = <1>; ++ ++ rcar_sound,dai { ++ dai0 { ++ playback = <&ssi7>; ++ capture = <&ssi8>; ++ }; ++ ++ dai1 { ++ playback = <&ssi0 &src0 &dvc0>; ++ capture = <&ssi1 &src1 &dvc1>; ++ }; ++ ++ dai2 { ++ capture = <&ssi6>; ++ }; ++ }; ++}; ++ ++&sdhi3 { ++ pinctrl-0 = <&sdhi3_pins_3v3>; ++ pinctrl-names = "default"; ++ ++ vmmc-supply = <&wlan_en>; ++ vqmmc-supply = <&vccq_sdhi3>; ++ keep-power-in-suspend; ++ enable-sdio-wakeup; ++ bus-width = <4>; ++ no-1-8-v; ++ non-removable; ++ cap-power-off-card; ++ max-frequency = <26000000>; ++ status = "okay"; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ wlcore: wlcore@2 { ++ compatible = "ti,wl1837"; ++ reg = <2>; ++ interrupt-parent = <&gpio1>; ++ interrupts = <25 IRQ_TYPE_EDGE_RISING>; ++ }; ++}; ++ ++&usb2_phy0 { ++ pinctrl-0 = <&usb0_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++}; ++ ++&hsusb { ++ status = "okay"; ++}; ++ ++&ehci0 { ++ status = "okay"; ++}; ++ ++&ohci0 { ++ status = "okay"; ++}; ++ ++&xhci0 { ++ status = "okay"; ++}; ++ ++&msiof1 { ++ status = "disabled"; ++}; ++ ++&can0 { ++ pinctrl-0 = <&can0_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ ++ renesas,can-clock-select = <0x0>; ++}; ++ ++&can1 { ++ pinctrl-0 = <&can1_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ ++ renesas,can-clock-select = <0x0>; ++}; ++ ++&canfd { ++ pinctrl-0 = <&canfd0_pins &canfd1_pins>; ++ pinctrl-names = "default"; ++ status = "disabled"; ++ ++ channel0 { ++ status = "okay"; ++ }; ++ ++ channel1 { ++ status = "okay"; ++ }; ++}; ++ ++&ssi8 { ++ shared-pin; ++}; ++ ++/* uncomment to enable CN48 on VIN4 */ ++//#include "../ulcb-kf-rpi.dtsi" ++/* uncomment to enable CN47: SD on SDHI3 */ ++//#include "../ulcb-kf-sd3.dtsi" ++/* uncomment to override CN29 (CMOS camera) on VIN5 */ ++//#include "../ulcb-kf-cmos.dtsi" +diff --git a/arch/arm64/boot/dts/renesas/legacy/r8a7795-es1-h3ulcb-kf-v1.dts b/arch/arm64/boot/dts/renesas/legacy/r8a7795-es1-h3ulcb-kf-v1.dts new file mode 100644 -index 0000000..2f8b274 +index 0000000..1672384 --- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-beta.dts -@@ -0,0 +1,23 @@ ++++ b/arch/arm64/boot/dts/renesas/legacy/r8a7795-es1-h3ulcb-kf-v1.dts +@@ -0,0 +1,440 @@ +/* -+ * Device Tree Source for the H3ULCB.HAD board Beta side on r8a7795 ES1.x ++ * Device Tree Source for the H3ULCB Kingfisher V1 board on r8a7795 ES1.x + * + * Copyright (C) 2017 Renesas Electronics Corp. + * Copyright (C) 2017 Cogent Embedded, Inc. @@ -139,257 +1854,2169 @@ index 0000000..2f8b274 + * kind, whether express or implied. + */ + -+#include "r8a7795-es1-h3ulcb-had.dtsi" ++#include "r8a7795-es1-h3ulcb-kf-v0.dts" + +/ { -+ model = "Renesas H3ULCB.HAD board Beta side based on r8a7795"; ++ model = "Renesas H3ULCB Kingfisher V1 board based on r8a7795"; ++ ++ aliases { ++ serial1 = &hscif0; ++ serial2 = &hscif1; ++ serial3 = &scif1; ++ }; ++ ++ wlan_en: regulator@4 { ++ compatible = "regulator-fixed"; ++ regulator-name = "wlan-en-regulator"; ++ ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_74 4 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ }; ++ ++ codec_en_reg: regulator@6 { ++ compatible = "regulator-fixed"; ++ regulator-name = "codec-en-regulator"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_74 15 0>; ++ ++ /* delay - CHECK */ ++ startup-delay-us = <70000>; ++ enable-active-high; ++ }; ++ ++ amp_en_reg: regulator@7 { ++ compatible = "regulator-fixed"; ++ regulator-name = "amp-en-regulator"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_74 0 0>; ++ ++ startup-delay-us = <0>; ++ enable-active-high; ++ }; ++ ++ /delete-node/regulator@8; ++ ++ sdio_switch: regulator@9 { ++ compatible = "regulator-fixed"; ++ regulator-name = "wifi_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_74 5 0>; ++ enable-active-low; ++ regulator-always-on; ++ }; ++ ++ /delete-node/regulator@10; ++ ++ radio_switch: regulator@11 { ++ compatible = "regulator-fixed"; ++ regulator-name = "radio_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_74 13 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ kim { ++ nshutdown_gpio = <343>; /* gpio_ext_74 pin 3 */ ++ }; ++ ++ hdmi-out { ++ compatible = "hdmi-connector"; ++ type = "a"; ++ ++ port { ++ hdmi_con: endpoint { ++ remote-endpoint = <&adv7513_out>; ++ }; ++ }; ++ }; +}; + -+&pciec0 { ++&pfc { ++ /delete-node/hscif4; ++ ++ scif1_pins: scif1 { ++ groups = "scif1_data_b"; ++ function = "scif1"; ++ }; ++ ++ hscif0_pins: hscif0 { ++ groups = "hscif0_data", "hscif0_ctrl"; ++ function = "hscif0"; ++ }; ++ ++ hscif1_pins: hscif1 { ++ groups = "hscif1_data_a", "hscif1_ctrl_a"; ++ function = "hscif1"; ++ }; ++ ++ du_pins: du { ++ groups = "du_rgb888", "du_sync", "du_clk_out_0", "du_disp"; ++ function = "du"; ++ }; ++}; ++ ++&du { ++ pinctrl-0 = <&du_pins>; ++ pinctrl-names = "default"; ++ ++ ports { ++ port@0 { ++ endpoint { ++ remote-endpoint = <&adv7513_in>; ++ }; ++ }; ++ }; ++}; ++ ++&gpio0 { ++ /delete-node/video_a_irq; ++ /delete-node/video_b_irq; ++ /delete-node/gpioext_2_20_irq; ++}; ++ ++&gpio1 { ++ /delete-node/gpioext_2_21_irq; ++ /delete-node/wifi_irq; ++}; ++ ++&gpio2 { ++ bl_pwm { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "BL PWM 100%"; ++ }; ++}; ++ ++&gpio5 { ++ /delete-node/touch_irq; ++ /delete-node/bt_strap; ++}; ++ ++&gpio7 { ++ /delete-node/gpioext_2_21_irq; ++}; ++ ++&scif1 { ++ pinctrl-0 = <&scif1_pins>; ++ pinctrl-names = "default"; ++ + status = "okay"; ++}; + -+ /* Endpoint */ -+ endpoint; ++&hscif0 { ++ pinctrl-0 = <&hscif0_pins>; ++ pinctrl-names = "default"; ++ uart-has-rtscts; ++ ++ status = "okay"; +}; -diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi ++ ++&hscif1 { ++ pinctrl-0 = <&hscif1_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++}; ++ ++&hscif4 { ++ /delete-property/pinctrl-0; ++ /delete-property/pinctrl-names; ++ ++ status = "disabled"; ++}; ++ ++&i2c2 { ++ /delete-node/pca9535@20; ++ /delete-node/pca9535@21; ++ ++ gpio_ext_74: pca9539@74 { ++ compatible = "nxp,pca9539"; ++ reg = <0x74>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio6>; ++ interrupts = <8 IRQ_TYPE_EDGE_FALLING>; ++ ++ hub_pwen { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "HUB pwen"; ++ }; ++ hub_rst { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "HUB rst"; ++ }; ++ otg_offvbus { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "OTG off VBUSn"; ++ }; ++ otg_extlpn { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "OTG EXTLPn"; ++ }; ++ otg_stat1 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "OTG Stat1"; ++ }; ++ otg_stat2 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "OTG Stat2"; ++ }; ++ }; ++ ++ gpio_ext_75: pca9539@75 { ++ compatible = "nxp,pca9539"; ++ reg = <0x75>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio6>; ++ interrupts = <4 IRQ_TYPE_EDGE_FALLING>; ++ ++ gps_rst { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "GPS rst"; ++ }; ++ fpdl_shdn { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "FPDLink shdn"; ++ }; ++ }; ++}; ++ ++&i2cswitch2 { ++ reg = <0x71>; ++ reset-gpios= <&gpio5 3 GPIO_ACTIVE_LOW>; ++ ++ i2c@4 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <4>; ++ ++ hdmi@3d { ++ compatible = "adi,adv7511w"; ++ reg = <0x3d>; ++ interrupt-parent = <&gpio2>; ++ interrupts = <0 IRQ_TYPE_EDGE_BOTH>; ++ pd-gpios = <&gpio_ext_75 5 GPIO_ACTIVE_LOW>; ++ ++ adi,input-depth = <8>; ++ adi,input-colorspace = "rgb"; ++ adi,input-clock = "1x"; ++ adi,input-style = <1>; ++ adi,input-justification = "evenly"; ++ adi,clock-delay = <1200>; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ adv7513_in: endpoint { ++ remote-endpoint = <&du_out_rgb>; ++ }; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ adv7513_out: endpoint { ++ remote-endpoint = <&hdmi_con>; ++ }; ++ }; ++ }; ++ }; ++ }; ++}; ++ ++&i2c4 { ++ /delete-node/pca9535@21; ++ ++ gpio_ext_76: pca9539@76 { ++ compatible = "nxp,pca9539"; ++ reg = <0x76>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio7>; ++ interrupts = <3 IRQ_TYPE_EDGE_FALLING>; ++ ++ port_b_a0 { ++ gpio-hog; ++ gpios = <0 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B A0"; ++ }; ++ port_b_a1 { ++ gpio-hog; ++ gpios = <1 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B A1"; ++ }; ++ port_a_a0 { ++ gpio-hog; ++ gpios = <2 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A A0"; ++ }; ++ port_a_a1 { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A A1"; ++ }; ++ cmos_pwdn { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "CMOS PWDN"; ++ }; ++ cmos_rst { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "CMOS RST"; ++ }; ++ /* pin 12 - CAM_CLK */ ++ rpi_cam_io_1 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "RaspB_IO1"; ++ }; ++ /* pin 11 - CAM_GPIO - assume pwdn */ ++ rpi_cam_io_0 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "RaspB_IO0"; ++ }; ++ sam_rst { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "SAM RST"; ++ }; ++ sam_pwr { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "SAM PWR"; ++ }; ++ /* 0 - FPDLink output, 1 - LVDS output */ ++ lvds_vs_fpdl { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "LVDS switch"; ++ }; ++ }; ++ ++ gpio_ext_77: pca9539@77 { ++ compatible = "nxp,pca9539"; ++ reg = <0x77>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio5>; ++ interrupts = <9 IRQ_TYPE_EDGE_FALLING>; ++ ++ mpcie_wake { ++ gpio-hog; ++ gpios = <0 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "mPCIe WAKE#"; ++ }; ++ mpcie_wdisable { ++ gpio-hog; ++ gpios = <1 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "mPCIe W_DISABLE"; ++ }; ++ mpcie_clreq { ++ gpio-hog; ++ gpios = <2 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "mPCIe CLKREQ#"; ++ }; ++ mpcie_ovc { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "mPCIe OVC"; ++ }; ++ }; ++}; ++ ++&i2cswitch4 { ++ reg = <0x71>; ++ reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>; ++}; ++ ++&wlcore { ++ interrupts = <25 IRQ_TYPE_EDGE_FALLING>; ++}; +diff --git a/arch/arm64/boot/dts/renesas/legacy/r8a7795-h3ulcb-kf-v0.dts b/arch/arm64/boot/dts/renesas/legacy/r8a7795-h3ulcb-kf-v0.dts new file mode 100644 -index 0000000..d50ff7a +index 0000000..2a7ded7 --- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi -@@ -0,0 +1,225 @@ ++++ b/arch/arm64/boot/dts/renesas/legacy/r8a7795-h3ulcb-kf-v0.dts +@@ -0,0 +1,1720 @@ +/* -+ * Device Tree Source for the H3ULCB.HAD board on r8a7795 ES1.x ++ * Device Tree Source for the H3ULCB Kingfisher V0 board on r8a7795 + * -+ * Copyright (C) 2016-2017 Renesas Electronics Corp. -+ * Copyright (C) 2016-2017 Cogent Embedded, Inc. ++ * Copyright (C) 2017 Renesas Electronics Corp. ++ * Copyright (C) 2017 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + -+/* -+ * MSIOF0 - /dev/spidev1.0 connected to FPGA ethernet switch (both sides) -+ * MSIOF1 - /dev/spidev2.0 connected to RH850 (sideA to CSIH1, sideB to CSIH0) -+ */ -+ -+#include "r8a7795-es1-h3ulcb-view.dts" ++#include "../r8a7795-h3ulcb.dts" + +/ { -+ model = "Renesas H3ULCB.HAD board based on r8a7795"; ++ model = "Renesas H3ULCB Kingfisher V0 board based on r8a7795"; + + aliases { -+ serial1 = &scif1; -+ spi1 = &spi0_gpio; -+ spi2 = &spi1_gpio; ++ serial1 = &hscif4; + }; + -+ chosen { -+ stdout-path = "serial1:115200n8"; ++ snd_clk: snd_clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <24576000>; ++ clock-output-names = "scki"; + }; + -+ spi0_gpio: spi_gpio@0 { -+ compatible = "spi-gpio"; -+ num-chipselects = <1>; -+ gpio-sck = <&gpio5 17 0>; -+ gpio-mosi = <&gpio5 20 0>; -+ gpio-miso = <&gpio5 22 0>; -+ cs-gpios = <&gpio5 19 0>; ++ wlan_en: regulator@4 { ++ compatible = "regulator-fixed"; ++ regulator-name = "wlan-en-regulator"; ++ ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_20 4 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ }; ++ ++ vcc_sdhi3: regulator@41 { ++ compatible = "regulator-fixed"; ++ ++ regulator-name = "SDHI3 Vcc"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ ++ vccq_sdhi3: regulator@5 { ++ compatible = "regulator-fixed"; ++ ++ regulator-name = "SDHI3 VccQ"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ }; ++ ++ codec_en_reg: regulator@6 { ++ compatible = "regulator-fixed"; ++ regulator-name = "codec-en-regulator"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_20 15 0>; ++ ++ /* delay - CHECK */ ++ startup-delay-us = <70000>; ++ enable-active-high; ++ }; ++ ++ amp_en_reg: regulator@7 { ++ compatible = "regulator-fixed"; ++ regulator-name = "amp-en-regulator"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_20 0 0>; ++ ++ startup-delay-us = <0>; ++ enable-active-high; ++ }; ++ ++ lvds_switch: regulator@8 { ++ compatible = "regulator-fixed"; ++ regulator-name = "lvds_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio1 24 0>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ sdio_switch: regulator@9 { ++ compatible = "regulator-fixed"; ++ regulator-name = "wifi_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_20 5 0>; ++ enable-active-low; ++ regulator-always-on; ++ }; ++ ++ sound_switch: regulator@10 { ++ compatible = "regulator-fixed"; ++ regulator-name = "pcm3168a_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_21 5 0>; ++ enable-active-low; ++ regulator-always-on; ++ }; ++ ++ radio_switch: regulator@11 { ++ compatible = "regulator-fixed"; ++ regulator-name = "radio_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_20 13 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ kim { ++ compatible = "kim"; ++ nshutdown_gpio = <343>; /* pca9535@i2c2.0x20 pin 3 */ ++ /* serial1 */ ++ dev_name = "/dev/ttySC1"; ++ flow_cntrl = <1>; ++ /* int div 8 hscif@26.6666656MHz */ ++ baud_rate = <3333332>; ++ }; ++ ++ btwilink { ++ compatible = "btwilink"; ++ }; ++ ++ sound_ext: sound@0 { ++ pinctrl-0 = <&sound_0_pins>; ++ pinctrl-names = "default"; ++ compatible = "simple-audio-card"; ++ ++ simple-audio-card,format = "left_j"; ++ simple-audio-card,name = "pcm3168a"; ++ ++ simple-audio-card,bitclock-master = <&sound_ext_master>; ++ simple-audio-card,frame-master = <&sound_ext_master>; ++ sound_ext_master: simple-audio-card,cpu@0 { ++ sound-dai = <&rcar_sound 0>; ++ dai-tdm-slot-num = <8>; ++ dai-tdm-slot-width = <32>; ++ }; ++ ++ simple-audio-card,codec@0 { ++ sound-dai = <&pcm3168a>; ++ dai-tdm-slot-num = <8>; ++ dai-tdm-slot-width = <32>; ++ system-clock-frequency = <24576000>; ++ }; ++ }; ++ ++ /delete-node/sound; ++ ++ rsnd_ak4613: sound@1 { ++ pinctrl-0 = <&sound_1_pins>; ++ pinctrl-names = "default"; ++ compatible = "simple-audio-card"; ++ ++ simple-audio-card,format = "left_j"; ++ simple-audio-card,name = "ak4613"; ++ ++ simple-audio-card,bitclock-master = <&sndcpu>; ++ simple-audio-card,frame-master = <&sndcpu>; ++ ++ sndcpu: simple-audio-card,cpu@1 { ++ sound-dai = <&rcar_sound 1>; ++ }; ++ ++ sndcodec: simple-audio-card,codec@1 { ++ sound-dai = <&ak4613>; ++ }; ++ }; ++ ++ sound_radio: sound@2 { ++ pinctrl-0 = <&sound_2_pins>; ++ pinctrl-names = "default"; ++ compatible = "simple-audio-card"; ++ ++ simple-audio-card,format = "i2s"; ++ simple-audio-card,name = "radio"; ++ ++ simple-audio-card,bitclock-master = <&sound_radio_master>; ++ simple-audio-card,frame-master = <&sound_radio_master>; ++ simple-audio-card,cpu@2 { ++ sound-dai = <&rcar_sound 2>; ++ }; ++ ++ sound_radio_master: simple-audio-card,codec@2 { ++ sound-dai = <&radio>; ++ system-clock-frequency = <12288000>; ++ }; ++ }; ++ ++ lvds-encoder { ++ compatible = "thine,thc63lvdm83d"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ port@0 { ++ reg = <0>; ++ lvds_enc_in: endpoint { ++ remote-endpoint = <&du_out_lvds0>; ++ }; ++ }; ++ port@1 { ++ reg = <1>; ++ lvds_enc_out: endpoint { ++ remote-endpoint = <&lvds_in>; ++ }; ++ }; ++ }; ++ }; ++ ++ lvds { ++ compatible = "lvds-connector"; ++ ++ width-mm = <210>; ++ height-mm = <158>; ++ ++ panel-timing { ++ /* 1280x800 @60Hz */ ++ clock-frequency = <65000000>; ++ hactive = <1280>; ++ vactive = <800>; ++ hsync-len = <40>; ++ hfront-porch = <80>; ++ hback-porch = <40>; ++ vfront-porch = <14>; ++ vback-porch = <14>; ++ vsync-len = <4>; ++ }; ++ ++ port { ++ lvds_in: endpoint { ++ remote-endpoint = <&lvds_enc_out>; ++ }; ++ }; ++ }; ++ ++ radio: si468x@0 { ++ compatible = "si,si468x-pcm"; ++ status = "okay"; ++ ++ #sound-dai-cells = <0>; ++ }; ++}; ++ ++&pfc { ++ hscif4_pins: hscif4 { ++ groups = "hscif4_data_a", "hscif4_ctrl"; ++ function = "hscif4"; ++ }; ++ ++ sdhi3_pins_3v3: sd3_3v3 { ++ groups = "sdhi3_data4", "sdhi3_ctrl"; ++ function = "sdhi3"; ++ power-source = <3300>; ++ }; ++ ++ sound_0_pins: sound0 { ++ groups = "ssi78_ctrl", "ssi7_data", "ssi8_data"; ++ function = "ssi"; ++ }; ++ ++ sound_1_pins: sound1 { ++ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; ++ function = "ssi"; ++ }; ++ ++ sound_2_pins: sound2 { ++ groups = "ssi6_ctrl", "ssi6_data"; ++ function = "ssi"; ++ }; ++ ++ usb0_pins: usb0 { ++ groups = "usb0"; ++ function = "usb0"; ++ }; ++ ++ can0_pins: can0 { ++ groups = "can0_data_a"; ++ function = "can0"; ++ }; ++ ++ can1_pins: can1 { ++ groups = "can1_data"; ++ function = "can1"; ++ }; ++ ++ canfd0_pins: canfd0 { ++ groups = "canfd0_data_a"; ++ function = "canfd0"; ++ }; ++ ++ canfd1_pins: canfd1 { ++ groups = "canfd1_data"; ++ function = "canfd1"; ++ }; ++}; ++ ++&du { ++ ports { ++ port@3 { ++ endpoint { ++ remote-endpoint = <&lvds_enc_in>; ++ }; ++ }; ++ }; ++}; ++ ++&gpio0 { ++ video_a_irq { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A irq"; ++ }; ++ ++ video_b_irq { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B irq"; ++ }; ++ ++ gpioext_2_20_irq { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "0x20@i2c2 irq"; ++ }; ++}; ++ ++&gpio1 { ++ gpioext_2_21_irq { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "0x21@i2c2 irq"; ++ }; ++ ++ wifi_irq { ++ gpio-hog; ++ gpios = <25 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "wifi irq"; ++ }; ++}; ++ ++&gpio5 { ++ touch_irq { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "touch irq"; ++ }; ++ ++ /* From TI forum */ ++ /* BT_AUD_OUT should be pulled low when WL_EN is activated. */ ++ /* in case it isn't, wilink8 ends up in one of the test modes that introduces various issues */ ++ bt_strap { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "BT strap pin"; ++ }; ++}; ++ ++&gpio7 { ++ gpioext_2_21_irq { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "0x21@i2c4 irq"; ++ }; ++}; ++ ++&hscif4 { ++ pinctrl-0 = <&hscif4_pins>; ++ pinctrl-names = "default"; ++ uart-has-rtscts; ++ ++ status = "okay"; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++ ++ gpio_ext_20: pca9535@20 { ++ compatible = "nxp,pca9535"; ++ reg = <0x20>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio0>; ++ interrupts = <15 IRQ_TYPE_EDGE_FALLING>; ++ }; ++ ++ gpio_ext_21: pca9535@21 { ++ compatible = "nxp,pca9535"; ++ reg = <0x21>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio1>; ++ interrupts = <15 IRQ_TYPE_EDGE_FALLING>; ++ }; ++ ++ i2cswitch2: pca9548@74 { ++ compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; ++ reg = <0x74>; ++ reset-gpios = <&gpio6 5 GPIO_ACTIVE_LOW>; + -+ spidev@0 { -+ compatible = "spi-gpio"; ++ i2c@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; + reg = <0>; -+ spi-max-frequency = <2000000>; -+ spi-cpha; -+ spi-cpol; ++ /* BCM node(s) */ ++ }; ++ ++ i2c@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <1>; ++ /* USB3.0 HUB node(s) */ ++ }; ++ ++ i2c@2 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <2>; ++ /* Power amp node(s) */ ++ }; ++ ++ i2c@3 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <3>; ++ /* Radio node(s) */ ++ }; ++ ++ i2c@4 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <4>; ++ /* A2B node(s) */ ++ }; ++ ++ i2c@5 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <5>; ++ /* PCIe node(s) */ ++ }; ++ ++ i2c@6 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <6>; ++ /* LVDS display node(s) */ ++ ++ polytouch: edt-ft5x06@38 { ++ compatible = "edt,edt-ft5x06"; ++ reg = <0x38>; ++ interrupt-parent = <&gpio5>; ++ interrupts = <6 IRQ_TYPE_EDGE_FALLING>; ++ }; ++ }; ++ ++ i2c@7 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <7>; ++ /* Audio, GPS and Gyro node(s) */ ++ ++ pcm3168a: audio-codec@44 { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm3168a"; ++ reg = <0x44>; ++ clocks = <&snd_clk>; ++ clock-names = "scki"; ++ tdm; ++ VDD1-supply = <&codec_en_reg>; ++ VDD2-supply = <&codec_en_reg>; ++ VCCAD1-supply = <&codec_en_reg>; ++ VCCAD2-supply = <&codec_en_reg>; ++ VCCDA1-supply = <&_en_reg>; ++ VCCDA2-supply = <&_en_reg>; ++ }; ++ ++ lsm9ds0_acc_mag@1d { ++ compatible = "st,lsm9ds0_accel_magn"; ++ reg = <0x1d>; ++ }; ++ ++ lsm9ds0_gyr@6b { ++ compatible = "st,lsm9ds0_gyro"; ++ reg = <0x6b>; ++ }; ++ ++ /* GPS@ 0x42 */ + }; + }; ++}; + -+ spi1_gpio: spi_gpio@1 { -+ compatible = "spi-gpio"; -+ num-chipselects = <1>; -+ gpio-sck = <&gpio6 8 0>; -+ gpio-mosi = <&gpio6 7 0>; -+ gpio-miso = <&gpio6 10 0>; -+ cs-gpios = <&gpio6 5 0>; ++&i2c4 { ++ gpio_ext_22: pca9535@21 { ++ compatible = "nxp,pca9535"; ++ reg = <0x22>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio7>; ++ interrupts = <3 IRQ_TYPE_EDGE_FALLING>; ++ ++ cmos_pwdn { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "CMOS PWDN"; ++ }; ++ cmos_rst { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "CMOS RST"; ++ }; ++ /* pin 12 - CAM_CLK */ ++ rpi_cam_io_1 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "RaspB_IO1"; ++ }; ++ /* pin 11 - CAM_GPIO - assume pwdn */ ++ rpi_cam_io_0 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "RaspB_IO0"; ++ }; ++ }; ++ ++ i2cswitch4: pca9548@74 { ++ compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; ++ reg = <0x74>; ++ reset-gpios= <&gpio6 21 GPIO_ACTIVE_LOW>; + -+ spidev@0 { -+ compatible = "spi-gpio"; ++ i2c@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; + reg = <0>; -+ spi-max-frequency = <2000000>; -+ spi-cpha; -+ spi-cpol; ++ /* SAM node(s) */ ++ }; ++ ++ i2c@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <1>; ++ /* Slot A (CN10) */ ++ ++ ov106xx@0 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x60>; ++ ++ port@0 { ++ ov106xx_in0: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin0ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ ov106xx_ti964_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep0>; ++ }; ++ ov106xx_ti954_des0ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep0>; ++ }; ++ }; ++ }; ++ ++ ov106xx@1 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x61>; ++ ++ port@0 { ++ ov106xx_in1: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin1ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ ov106xx_ti964_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep1>; ++ }; ++ ov106xx_ti954_des0ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep1>; ++ }; ++ }; ++ }; ++ ++ ov106xx@2 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x62>; ++ ++ port@0 { ++ ov106xx_in2: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin2ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ ov106xx_ti964_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep2>; ++ }; ++ }; ++ }; ++ ++ ov106xx@3 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x63>; ++ ++ port@0 { ++ ov106xx_in3: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin3ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ ov106xx_ti964_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep3>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB964 @ 0x3a */ ++ ti964-ti9x3@0 { ++ compatible = "ti,ti964-ti9x3"; ++ reg = <0x3a>; ++ ti,sensor_delay = <350>; ++ ti,links = <4>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "coax"; ++ ++ port@0 { ++ ti964_des0ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ ti964_des0ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ ti964_des0ep2: endpoint@2 { ++ ti9x3-addr = <0x0e>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ ti964_des0ep3: endpoint@3 { ++ ti9x3-addr = <0x0f>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ ti964_csi0ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB954 @ 0x38 */ ++ ti954-ti9x3@0 { ++ compatible = "ti,ti954-ti9x3"; ++ reg = <0x38>; ++ /* gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; */ ++ ti,sensor_delay = <350>; ++ ti,links = <2>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "coax"; ++ ++ port@0 { ++ ti954_des0ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ ti954_des0ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ }; ++ port@1 { ++ ti954_csi0ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ ++ /* MAX9286 @ 0x2c */ ++ max9286-max9271@0 { ++ compatible = "maxim,max9286-max9271"; ++ reg = <0x2c>; ++ maxim,sensor_delay = <350>; ++ maxim,links = <4>; ++ maxim,lanes = <4>; ++ maxim,resetb-gpio = <1>; ++ maxim,fsync-mode = "automatic"; ++ maxim,timeout = <100>; ++ ++ port@0 { ++ max9286_des0ep0: endpoint@0 { ++ max9271-addr = <0x50>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ max9286_des0ep1: endpoint@1 { ++ max9271-addr = <0x51>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ max9286_des0ep2: endpoint@2 { ++ max9271-addr = <0x52>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ max9286_des0ep3: endpoint@3 { ++ max9271-addr = <0x53>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ max9286_csi0ep0: endpoint { ++ csi-rate = <700>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ }; ++ ++ i2c@2 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <2>; ++ /* Slot B (CN11) */ ++ ++ ov106xx@4 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x64>; ++ ++ port@0 { ++ ov106xx_in4: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin4ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep0>; ++ }; ++ ov106xx_ti964_des1ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep0>; ++ }; ++ ov106xx_ti954_des1ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep0>; ++ }; ++ }; ++ }; ++ ++ ov106xx@5 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x65>; ++ ++ port@0 { ++ ov106xx_in5: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin5ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep1>; ++ }; ++ ov106xx_ti964_des1ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep1>; ++ }; ++ ov106xx_ti954_des1ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep1>; ++ }; ++ }; ++ }; ++ ++ ov106xx@6 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x66>; ++ ++ port@0 { ++ ov106xx_in6: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin6ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep2>; ++ }; ++ ov106xx_ti964_des1ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep2>; ++ }; ++ }; ++ }; ++ ++ ov106xx@7 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x67>; ++ ++ port@0 { ++ ov106xx_in7: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin7ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des1ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep3>; ++ }; ++ ov106xx_ti964_des1ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep3>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB964 @ 0x3a */ ++ ti964-ti9x3@1 { ++ compatible = "ti,ti964-ti9x3"; ++ reg = <0x3a>; ++ ti,sensor_delay = <350>; ++ ti,links = <4>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "coax"; ++ ++ port@0 { ++ ti964_des1ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in4>; ++ }; ++ ti964_des1ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in5>; ++ }; ++ ti964_des1ep2: endpoint@2 { ++ ti9x3-addr = <0x0e>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in6>; ++ }; ++ ti964_des1ep3: endpoint@3 { ++ ti9x3-addr = <0x0f>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in7>; ++ }; ++ }; ++ port@1 { ++ ti964_csi2ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB954 @ 0x38 */ ++ ti954-ti9x3@1 { ++ compatible = "ti,ti954-ti9x3"; ++ reg = <0x38>; ++ /* gpios = <&video_b_ext1 10 GPIO_ACTIVE_HIGH>; */ ++ ti,sensor_delay = <350>; ++ ti,links = <2>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "coax"; ++ ++ port@0 { ++ ti954_des1ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in4>; ++ }; ++ ti954_des1ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in5>; ++ }; ++ }; ++ port@1 { ++ ti954_csi2ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ }; ++ ++ /* MAX9286 @ 0x2c */ ++ max9286-max9271@1 { ++ compatible = "maxim,max9286-max9271"; ++ reg = <0x2c>; ++ maxim,sensor_delay = <350>; ++ maxim,links = <4>; ++ maxim,lanes = <4>; ++ maxim,resetb-gpio = <1>; ++ maxim,fsync-mode = "automatic"; ++ maxim,timeout = <100>; ++ ++ port@0 { ++ max9286_des1ep0: endpoint@0 { ++ max9271-addr = <0x50>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in4>; ++ }; ++ max9286_des1ep1: endpoint@1 { ++ max9271-addr = <0x51>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in5>; ++ }; ++ max9286_des1ep2: endpoint@2 { ++ max9271-addr = <0x52>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in6>; ++ }; ++ max9286_des1ep3: endpoint@3 { ++ max9271-addr = <0x53>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in7>; ++ }; ++ }; ++ port@1 { ++ max9286_csi2ep0: endpoint { ++ csi-rate = <700>; ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ }; ++ }; ++ ++ i2c@3 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <3>; ++ /* MOST node(s) */ ++ }; ++ ++ i2c@6 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <6>; ++ /* Slot B (CN11) */ ++ ++ video_b_ext0: pca9535@27 { ++ compatible = "nxp,pca9535"; ++ reg = <0x27>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_b_des_cfg1 { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B cfg1"; ++ }; ++ video_b_des_cfg0 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B cfg0"; ++ }; ++ video_b_pwr_shdn { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR_SHDN"; ++ }; ++ video_b_cam_pwr0 { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR0"; ++ }; ++ video_b_cam_pwr1 { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR1"; ++ }; ++ video_b_cam_pwr2 { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR2"; ++ }; ++ video_b_cam_pwr3 { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR3"; ++ }; ++ video_b_des_shdn { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B DES_SHDN"; ++ }; ++ video_b_des_led { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B led"; ++ }; ++ }; ++ ++ video_b_ext1: max7325@5c { ++ compatible = "maxim,max7325"; ++ reg = <0x5c>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_b_des_cfg2 { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B cfg2"; ++ }; ++ video_b_des_cfg1 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B cfg1"; ++ }; ++ video_b_des_cfg0 { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-B cfg0"; ++ }; ++ video_b_pwr_shdn { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR_SHDN"; ++ }; ++ video_b_cam_pwr0 { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR0"; ++ }; ++ video_b_cam_pwr1 { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR1"; ++ }; ++ video_b_cam_pwr2 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR2"; ++ }; ++ video_b_cam_pwr3 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B PWR3"; ++ }; ++ video_b_des_shdn { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B DES_SHDN"; ++ }; ++ video_b_led { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B LED"; ++ }; ++ }; ++ }; ++ ++ i2c@7 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <7>; ++ /* Slot A (CN10) */ ++ ++ video_a_ext0: pca9535@26 { ++ compatible = "nxp,pca9535"; ++ reg = <0x26>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_a_des_cfg1 { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg1"; ++ }; ++ video_a_des_cfg0 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg0"; ++ }; ++ video_a_pwr_shdn { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR_SHDN"; ++ }; ++ video_a_cam_pwr0 { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR0"; ++ }; ++ video_a_cam_pwr1 { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR1"; ++ }; ++ video_a_cam_pwr2 { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR2"; ++ }; ++ video_a_cam_pwr3 { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR3"; ++ }; ++ video_a_des_shdn { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A DES_SHDN"; ++ }; ++ video_a_des_led { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A led"; ++ }; ++ }; ++ ++ video_a_ext1: max7325@5c { ++ compatible = "maxim,max7325"; ++ reg = <0x5c>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_a_des_cfg2 { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg2"; ++ }; ++ video_a_des_cfg1 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg1"; ++ }; ++ video_a_des_cfg0 { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg0"; ++ }; ++ video_a_pwr_shdn { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR_SHDN"; ++ }; ++ video_a_cam_pwr0 { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR0"; ++ }; ++ video_a_cam_pwr1 { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR1"; ++ }; ++ video_a_cam_pwr2 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR2"; ++ }; ++ video_a_cam_pwr3 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR3"; ++ }; ++ video_a_des_shdn { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A DES_SHDN"; ++ }; ++ video_a_led { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A LED"; ++ }; ++ }; + }; + }; ++}; + -+ hdmi1-out { -+ compatible = "hdmi-connector"; -+ type = "a"; ++&pcie_bus_clk { ++ clock-frequency = <100000000>; ++ status = "okay"; ++}; + -+ port { -+ hdmi1_con: endpoint { -+ remote-endpoint = <&rcar_dw_hdmi1_out>; ++&pciec0 { ++ status = "okay"; ++}; ++ ++&pciec1 { ++ status = "okay"; ++}; ++ ++&vin0 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin0ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ }; ++ port@1 { ++ csi0ep0: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin0_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ vin0_ti964_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep0>; ++ }; ++ vin0_ti954_des0ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep0>; + }; + }; + }; +}; + -+&du { ++&vin1 { ++ status = "okay"; ++ + ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin1ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <1>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ }; + port@1 { -+ endpoint { -+ remote-endpoint = <&rcar_dw_hdmi0_in>; ++ csi0ep1: endpoint { ++ remote-endpoint = <&csi2_40_ep>; + }; + }; + port@2 { -+ endpoint { -+ remote-endpoint = <&rcar_dw_hdmi1_in>; ++ vin1_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ vin1_ti964_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep1>; ++ }; ++ vin1_ti954_des0ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep1>; + }; + }; + }; +}; + -+&hdmi1 { ++&vin2 { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; ++ + port@0 { -+ reg = <0>; -+ rcar_dw_hdmi1_in: endpoint { -+ remote-endpoint = <&du_out_hdmi1>; ++ vin2ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <2>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in2>; + }; + }; + port@1 { -+ reg = <1>; -+ rcar_dw_hdmi1_out: endpoint { -+ remote-endpoint = <&hdmi1_con>; ++ csi0ep2: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin2_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ vin2_ti964_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep2>; + }; + }; + }; +}; + -+&pfc { -+ scif1_pins: scif1 { -+ groups = "scif1_data_a"; -+ function = "scif1"; ++&vin3 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin3ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <3>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ csi0ep3: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin3_max9286_des0ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ vin3_ti964_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep3>; ++ }; ++ }; + }; ++}; + -+ msiof0_pins: spi1 { -+ groups = "msiof0_clk", "msiof0_rxd", "msiof0_txd", -+ "msiof0_ss1"; -+ function = "msiof0"; ++&vin4 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin4ep0: endpoint { ++ csi,select = "csi41"; ++ virtual,channel = <0>; ++ remote-endpoint = <&ov106xx_in4>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep0: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin4_max9286_des1ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep0>; ++ }; ++ vin4_ti964_des1ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep0>; ++ }; ++ vin4_ti954_des1ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep0>; ++ }; ++ }; + }; ++}; + -+ msiof1_pins: spi2 { -+ groups = "msiof1_clk_a", "msiof1_rxd_a", "msiof1_txd_a", -+ "msiof1_ss1_a"; -+ function = "msiof1"; ++&vin5 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin5ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <1>; ++ remote-endpoint = <&ov106xx_in5>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep1: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin5_max9286_des1ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep1>; ++ }; ++ vin5_ti964_des1ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep1>; ++ }; ++ vin5_ti954_des1ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des1ep1>; ++ }; ++ }; + }; ++}; + -+ sound_clk_pins: sound-clk { -+ groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a", -+ "audio_clkout_a" /*, "audio_clkout3_a"*/; -+ function = "audio_clk"; ++&vin6 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin6ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <2>; ++ remote-endpoint = <&ov106xx_in6>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep2: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin6_max9286_des1ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep2>; ++ }; ++ vin6_ti964_des1ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep2>; ++ }; ++ }; + }; ++}; + -+ usb31_pins: usb31 { -+ groups = "usb31"; -+ function = "usb31"; ++&vin7 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin7ep0: endpoint@0 { ++ csi,select = "csi41"; ++ virtual,channel = <3>; ++ remote-endpoint = <&ov106xx_in7>; ++ data-lanes = <1 2 3 4>; ++ }; ++ }; ++ port@1 { ++ csi2ep3: endpoint { ++ remote-endpoint = <&csi2_41_ep>; ++ }; ++ }; ++ port@2 { ++ vin7_max9286_des1ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des1ep3>; ++ }; ++ vin7_ti964_des1ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des1ep3>; ++ }; ++ }; + }; ++}; + -+ can0_pins: can0 { -+ groups = "can0_data_a"; -+ function = "can0"; ++&csi2_40 { ++ status = "okay"; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "ycbcr422"; ++ receive,vc = <0>; ++ }; ++ csi2_vc1 { ++ data,type = "ycbcr422"; ++ receive,vc = <1>; ++ }; ++ csi2_vc2 { ++ data,type = "ycbcr422"; ++ receive,vc = <2>; ++ }; ++ csi2_vc3 { ++ data,type = "ycbcr422"; ++ receive,vc = <3>; ++ }; + }; + -+ canfd0_pins: canfd0 { -+ groups = "canfd0_data_a"; -+ function = "canfd0"; ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_40_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ csi-rate = <300>; ++ }; + }; +}; + -+&scif1 { -+ pinctrl-0 = <&scif1_pins>; -+ pinctrl-names = "default"; ++&csi2_41 { + status = "okay"; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "ycbcr422"; ++ receive,vc = <0>; ++ }; ++ csi2_vc1 { ++ data,type = "ycbcr422"; ++ receive,vc = <1>; ++ }; ++ csi2_vc2 { ++ data,type = "ycbcr422"; ++ receive,vc = <2>; ++ }; ++ csi2_vc3 { ++ data,type = "ycbcr422"; ++ receive,vc = <3>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_41_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ csi-rate = <300>; ++ }; ++ }; +}; + -+&avb { -+ /delete-property/phy-handle; -+ /delete-property/phy-gpios; -+ /delete-node/ethernet-phy@0; ++&rcar_sound { ++ pinctrl-0 = <&sound_clk_pins>; + -+ fixed-link { -+ speed = <1000>; -+ full-duplex; ++ /* Multi DAI */ ++ #sound-dai-cells = <1>; ++ ++ rcar_sound,dai { ++ dai0 { ++ playback = <&ssi7>; ++ capture = <&ssi8>; ++ }; ++ ++ dai1 { ++ playback = <&ssi0 &src0 &dvc0>; ++ capture = <&ssi1 &src1 &dvc1>; ++ }; ++ ++ dai2 { ++ capture = <&ssi6>; ++ }; + }; +}; + -+&msiof0 { -+ pinctrl-0 = <&msiof0_pins>; ++&sdhi3 { ++ pinctrl-0 = <&sdhi3_pins_3v3>; + pinctrl-names = "default"; -+ status = "disabled"; -+ cs-gpios = <&gpio5 19 0>; + -+ spidev@0 { -+ compatible = "renesas,sh-msiof"; -+ reg = <0>; -+ spi-max-frequency = <66666666>; -+ spi-cpha; -+ spi-cpol; ++ vmmc-supply = <&wlan_en>; ++ vqmmc-supply = <&vccq_sdhi3>; ++ keep-power-in-suspend; ++ enable-sdio-wakeup; ++ bus-width = <4>; ++ no-1-8-v; ++ non-removable; ++ cap-power-off-card; ++ max-frequency = <26000000>; ++ status = "okay"; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ wlcore: wlcore@2 { ++ compatible = "ti,wl1837"; ++ reg = <2>; ++ interrupt-parent = <&gpio1>; ++ interrupts = <25 IRQ_TYPE_EDGE_RISING>; + }; +}; + ++&usb2_phy0 { ++ pinctrl-0 = <&usb0_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++}; ++ ++&ehci0 { ++ status = "okay"; ++}; ++ ++&ohci0 { ++ status = "okay"; ++}; ++ ++&xhci0 { ++ status = "okay"; ++}; ++ +&msiof1 { + status = "disabled"; -+ cs-gpios = <&gpio6 5 0>; +}; + +&can0 { + pinctrl-0 = <&can0_pins>; + pinctrl-names = "default"; -+ status = "disabled"; ++ status = "okay"; + + renesas,can-clock-select = <0x0>; -+ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH /* enable - shared with camera board */ -+ &gpio2 7 GPIO_ACTIVE_LOW /* standby */ -+ >; +}; + -+&canfd { -+ pinctrl-0 = <&canfd0_pins>; ++&can1 { ++ pinctrl-0 = <&can1_pins>; + pinctrl-names = "default"; + status = "okay"; + + renesas,can-clock-select = <0x0>; -+ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH /* enable - shared with camera board */ -+ &gpio2 7 GPIO_ACTIVE_LOW /* standby */ -+ >; ++}; ++ ++&canfd { ++ pinctrl-0 = <&canfd0_pins &canfd1_pins>; ++ pinctrl-names = "default"; ++ status = "disabled"; + + channel0 { + status = "okay"; + }; ++ ++ channel1 { ++ status = "okay"; ++ }; +}; + -+&xhci1 { -+ status = "okay"; -+ pinctrl-0 = <&usb31_pins>; -+ pinctrl-names = "default"; ++&ssi8 { ++ shared-pin; +}; -diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts ++ ++/* uncomment to enable CN47: SD on SDHI3 */ ++//#include "../ulcb-kf-sd3.dtsi" ++/* CN48 (Raspberry Pi) on VIN4 */ ++//#include "../ulcb-kf-rpi.dtsi" ++/* CN29: (CMOS camera) on VIN5 */ ++//#include "../ulcb-kf-cmos.dtsi" +diff --git a/arch/arm64/boot/dts/renesas/legacy/r8a7795-h3ulcb-kf-v1.dts b/arch/arm64/boot/dts/renesas/legacy/r8a7795-h3ulcb-kf-v1.dts new file mode 100644 -index 0000000..408bf2e +index 0000000..119f58c --- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf-v1.dts -@@ -0,0 +1,445 @@ ++++ b/arch/arm64/boot/dts/renesas/legacy/r8a7795-h3ulcb-kf-v1.dts +@@ -0,0 +1,464 @@ +/* -+ * Device Tree Source for the H3ULCB Kingfisher V1 board on r8a7795 ES1.x ++ * Device Tree Source for the H3ULCB Kingfisher V1 board + * + * Copyright (C) 2017 Renesas Electronics Corp. + * Copyright (C) 2017 Cogent Embedded, Inc. @@ -399,7 +4026,7 @@ index 0000000..408bf2e + * kind, whether express or implied. + */ + -+#include "r8a7795-es1-h3ulcb-kf.dts" ++#include "r8a7795-h3ulcb-kf-v0.dts" + +/ { + model = "Renesas H3ULCB Kingfisher V1 board based on r8a7795"; @@ -470,6 +4097,25 @@ index 0000000..408bf2e + regulator-always-on; + }; + ++ mpcie_3v3: regulator@12 { ++ compatible = "regulator-fixed"; ++ regulator-name = "mPCIe 3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_77 14 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ }; ++ ++ mpcie_1v8: regulator@13 { ++ compatible = "regulator-fixed"; ++ regulator-name = "mPCIe 1v8"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ gpio = <&gpio_ext_77 15 GPIO_ACTIVE_HIGH>; ++ startup-delay-us = <200000>; ++ enable-active-high; ++ }; ++ + kim { + nshutdown_gpio = <343>; /* gpio_ext_74 pin 3 */ + }; @@ -520,11 +4166,6 @@ index 0000000..408bf2e + remote-endpoint = <&adv7513_in>; + }; + }; -+ port@1 { -+ endpoint { -+ remote-endpoint = <&rcar_dw_hdmi0_in>; -+ }; -+ }; + }; +}; + @@ -833,14 +4474,19 @@ index 0000000..408bf2e +&wlcore { + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; +}; -diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts ++ ++&pciec1 { ++ pcie3v3-supply = <&mpcie_3v3>; ++ pcie1v8-supply = <&mpcie_1v8>; ++}; +diff --git a/arch/arm64/boot/dts/renesas/legacy/r8a7796-m3ulcb-kf-v0.dts b/arch/arm64/boot/dts/renesas/legacy/r8a7796-m3ulcb-kf-v0.dts new file mode 100644 -index 0000000..897da81 +index 0000000..0ac577a --- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts -@@ -0,0 +1,1707 @@ ++++ b/arch/arm64/boot/dts/renesas/legacy/r8a7796-m3ulcb-kf-v0.dts +@@ -0,0 +1,1214 @@ +/* -+ * Device Tree Source for the H3ULCB Kingfisher board on r8a7795 ES1.x ++ * Device Tree Source for the M3ULCB Kingfisher V0 board on r8a7796 + * + * Copyright (C) 2017 Renesas Electronics Corp. + * Copyright (C) 2017 Cogent Embedded, Inc. @@ -850,10 +4496,10 @@ index 0000000..897da81 + * kind, whether express or implied. + */ + -+#include "r8a7795-es1-h3ulcb.dts" ++#include "../r8a7796-m3ulcb.dts" + +/ { -+ model = "Renesas H3ULCB Kingfisher board based on r8a7795"; ++ model = "Renesas M3ULCB Kingfisher V0 board based on r8a7796"; + + aliases { + serial1 = &hscif4; @@ -1147,6 +4793,16 @@ index 0000000..897da81 + }; +}; + ++&du { ++ ports { ++ port@2 { ++ endpoint { ++ remote-endpoint = <&lvds_enc_in>; ++ }; ++ }; ++ }; ++}; ++ +&gpio0 { + video_a_irq { + gpio-hog; @@ -1330,7 +4986,7 @@ index 0000000..897da81 + }; + + lsm9ds0_acc_mag@1d { -+ compatible = "st,lsm9ds0_acc_magn"; ++ compatible = "st,lsm9ds0_accel_magn"; + reg = <0x1d>; + }; + @@ -1605,6 +5261,2158 @@ index 0000000..897da81 + }; + }; + ++ i2c@3 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <3>; ++ /* MOST node(s) */ ++ }; ++ ++ i2c@7 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <7>; ++ /* Slot A (CN10) */ ++ ++ video_a_ext0: pca9535@26 { ++ compatible = "nxp,pca9535"; ++ reg = <0x26>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_a_des_cfg1 { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg1"; ++ }; ++ video_a_des_cfg0 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg0"; ++ }; ++ video_a_pwr_shdn { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR_SHDN"; ++ }; ++ video_a_cam_pwr0 { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR0"; ++ }; ++ video_a_cam_pwr1 { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR1"; ++ }; ++ video_a_cam_pwr2 { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR2"; ++ }; ++ video_a_cam_pwr3 { ++ gpio-hog; ++ gpios = <15 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR3"; ++ }; ++ video_a_des_shdn { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A DES_SHDN"; ++ }; ++ video_a_des_led { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A led"; ++ }; ++ }; ++ ++ video_a_ext1: max7325@5c { ++ compatible = "maxim,max7325"; ++ reg = <0x5c>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ video_a_des_cfg2 { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg2"; ++ }; ++ video_a_des_cfg1 { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg1"; ++ }; ++ video_a_des_cfg0 { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "Video-A cfg0"; ++ }; ++ video_a_pwr_shdn { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR_SHDN"; ++ }; ++ video_a_cam_pwr0 { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR0"; ++ }; ++ video_a_cam_pwr1 { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR1"; ++ }; ++ video_a_cam_pwr2 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR2"; ++ }; ++ video_a_cam_pwr3 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A PWR3"; ++ }; ++ video_a_des_shdn { ++ gpio-hog; ++ gpios = <13 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A DES_SHDN"; ++ }; ++ video_a_led { ++ gpio-hog; ++ gpios = <12 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A LED"; ++ }; ++ }; ++ }; ++ }; ++}; ++ ++&pcie_bus_clk { ++ clock-frequency = <100000000>; ++ status = "okay"; ++}; ++ ++&pciec0 { ++ status = "okay"; ++}; ++ ++&pciec1 { ++ status = "okay"; ++}; ++ ++&vin0 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin0ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ }; ++ port@1 { ++ csi0ep0: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin0_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ vin0_ti964_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep0>; ++ }; ++ vin0_ti954_des0ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep0>; ++ }; ++ }; ++ }; ++}; ++ ++&vin1 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin1ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <1>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ }; ++ port@1 { ++ csi0ep1: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin1_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ vin1_ti964_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep1>; ++ }; ++ vin1_ti954_des0ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep1>; ++ }; ++ }; ++ }; ++}; ++ ++&vin2 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin2ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <2>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ }; ++ port@1 { ++ csi0ep2: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin2_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ vin2_ti964_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep2>; ++ }; ++ }; ++ }; ++}; ++ ++&vin3 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ vin3ep0: endpoint { ++ csi,select = "csi40"; ++ virtual,channel = <3>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ csi0ep3: endpoint { ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ port@2 { ++ vin3_max9286_des0ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ vin3_ti964_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep3>; ++ }; ++ }; ++ }; ++}; ++ ++&csi2_40 { ++ status = "okay"; ++ ++ virtual,channel { ++ csi2_vc0 { ++ data,type = "ycbcr422"; ++ receive,vc = <0>; ++ }; ++ csi2_vc1 { ++ data,type = "ycbcr422"; ++ receive,vc = <1>; ++ }; ++ csi2_vc2 { ++ data,type = "ycbcr422"; ++ receive,vc = <2>; ++ }; ++ csi2_vc3 { ++ data,type = "ycbcr422"; ++ receive,vc = <3>; ++ }; ++ }; ++ ++ port { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ csi2_40_ep: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ csi-rate = <300>; ++ }; ++ }; ++}; ++ ++&rcar_sound { ++ pinctrl-0 = <&sound_clk_pins>; ++ ++ /* Multi DAI */ ++ #sound-dai-cells = <1>; ++ ++ rcar_sound,dai { ++ dai0 { ++ playback = <&ssi7>; ++ capture = <&ssi8>; ++ }; ++ ++ dai1 { ++ playback = <&ssi0 &src0 &dvc0>; ++ capture = <&ssi1 &src1 &dvc1>; ++ }; ++ ++ dai2 { ++ capture = <&ssi6>; ++ }; ++ }; ++}; ++ ++&sdhi3 { ++ pinctrl-0 = <&sdhi3_pins_3v3>; ++ pinctrl-names = "default"; ++ ++ vmmc-supply = <&wlan_en>; ++ vqmmc-supply = <&vccq_sdhi3>; ++ keep-power-in-suspend; ++ enable-sdio-wakeup; ++ bus-width = <4>; ++ no-1-8-v; ++ non-removable; ++ cap-power-off-card; ++ max-frequency = <26000000>; ++ status = "okay"; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ wlcore: wlcore@2 { ++ compatible = "ti,wl1837"; ++ reg = <2>; ++ interrupt-parent = <&gpio1>; ++ interrupts = <25 IRQ_TYPE_EDGE_RISING>; ++ }; ++}; ++ ++&usb2_phy0 { ++ pinctrl-0 = <&usb0_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++}; ++ ++&hsusb { ++ status = "okay"; ++}; ++ ++&ehci0 { ++ status = "okay"; ++}; ++ ++&ohci0 { ++ status = "okay"; ++}; ++ ++&xhci0 { ++ status = "okay"; ++}; ++ ++&msiof1 { ++ status = "disabled"; ++}; ++ ++&can0 { ++ pinctrl-0 = <&can0_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ ++ renesas,can-clock-select = <0x0>; ++}; ++ ++&can1 { ++ pinctrl-0 = <&can1_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ ++ renesas,can-clock-select = <0x0>; ++}; ++ ++&canfd { ++ pinctrl-0 = <&canfd0_pins &canfd1_pins>; ++ pinctrl-names = "default"; ++ status = "disabled"; ++ ++ channel0 { ++ status = "okay"; ++ }; ++ ++ channel1 { ++ status = "okay"; ++ }; ++}; ++ ++&ssi8 { ++ shared-pin; ++}; ++ ++/* uncomment to enable CN47: SD on SDHI3 */ ++//#include "../ulcb-kf-sd3.dtsi" ++/* CN48 (Raspberry Pi) on VIN4 */ ++#include "../ulcb-kf-rpi.dtsi" ++/* CN29: (CMOS camera) on VIN5 */ ++#include "../ulcb-kf-cmos.dtsi" +diff --git a/arch/arm64/boot/dts/renesas/legacy/r8a7796-m3ulcb-kf-v1.dts b/arch/arm64/boot/dts/renesas/legacy/r8a7796-m3ulcb-kf-v1.dts +new file mode 100644 +index 0000000..1344152 +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/legacy/r8a7796-m3ulcb-kf-v1.dts +@@ -0,0 +1,464 @@ ++/* ++ * Device Tree Source for the M3ULCB Kingfisher V1 board ++ * ++ * Copyright (C) 2017 Renesas Electronics Corp. ++ * Copyright (C) 2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++#include "r8a7796-m3ulcb-kf-v0.dts" ++ ++/ { ++ model = "Renesas M3ULCB Kingfisher V1 board based on r8a7796"; ++ ++ aliases { ++ serial1 = &hscif0; ++ serial2 = &hscif1; ++ serial3 = &scif1; ++ }; ++ ++ wlan_en: regulator@4 { ++ compatible = "regulator-fixed"; ++ regulator-name = "wlan-en-regulator"; ++ ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_74 4 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ }; ++ ++ codec_en_reg: regulator@6 { ++ compatible = "regulator-fixed"; ++ regulator-name = "codec-en-regulator"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_74 15 0>; ++ ++ /* delay - CHECK */ ++ startup-delay-us = <70000>; ++ enable-active-high; ++ }; ++ ++ amp_en_reg: regulator@7 { ++ compatible = "regulator-fixed"; ++ regulator-name = "amp-en-regulator"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_74 0 0>; ++ ++ startup-delay-us = <0>; ++ enable-active-high; ++ }; ++ ++ /delete-node/regulator@8; ++ ++ sdio_switch: regulator@9 { ++ compatible = "regulator-fixed"; ++ regulator-name = "wifi_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_74 5 0>; ++ enable-active-low; ++ regulator-always-on; ++ }; ++ ++ /delete-node/regulator@10; ++ ++ radio_switch: regulator@11 { ++ compatible = "regulator-fixed"; ++ regulator-name = "radio_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_74 13 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ mpcie_3v3: regulator@12 { ++ compatible = "regulator-fixed"; ++ regulator-name = "mPCIe 3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_77 14 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ }; ++ ++ mpcie_1v8: regulator@13 { ++ compatible = "regulator-fixed"; ++ regulator-name = "mPCIe 1v8"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ gpio = <&gpio_ext_77 15 GPIO_ACTIVE_HIGH>; ++ startup-delay-us = <200000>; ++ enable-active-high; ++ }; ++ ++ kim { ++ nshutdown_gpio = <343>; /* gpio_ext_74 pin 3 */ ++ }; ++ ++ hdmi-out { ++ compatible = "hdmi-connector"; ++ type = "a"; ++ ++ port { ++ hdmi_con: endpoint { ++ remote-endpoint = <&adv7513_out>; ++ }; ++ }; ++ }; ++}; ++ ++&pfc { ++ /delete-node/hscif4; ++ ++ scif1_pins: scif1 { ++ groups = "scif1_data_b"; ++ function = "scif1"; ++ }; ++ ++ hscif0_pins: hscif0 { ++ groups = "hscif0_data", "hscif0_ctrl"; ++ function = "hscif0"; ++ }; ++ ++ hscif1_pins: hscif1 { ++ groups = "hscif1_data_a", "hscif1_ctrl_a"; ++ function = "hscif1"; ++ }; ++ ++ du_pins: du { ++ groups = "du_rgb888", "du_sync", "du_clk_out_0", "du_disp"; ++ function = "du"; ++ }; ++}; ++ ++&du { ++ pinctrl-0 = <&du_pins>; ++ pinctrl-names = "default"; ++ ++ ports { ++ port@0 { ++ endpoint { ++ remote-endpoint = <&adv7513_in>; ++ }; ++ }; ++ }; ++}; ++ ++&gpio0 { ++ /delete-node/video_a_irq; ++ /delete-node/video_b_irq; ++ /delete-node/gpioext_2_20_irq; ++}; ++ ++&gpio1 { ++ /delete-node/gpioext_2_21_irq; ++ /delete-node/wifi_irq; ++}; ++ ++&gpio2 { ++ bl_pwm { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "BL PWM 100%"; ++ }; ++}; ++ ++&gpio5 { ++ /delete-node/touch_irq; ++ /delete-node/bt_strap; ++}; ++ ++&gpio7 { ++ /delete-node/gpioext_2_21_irq; ++}; ++ ++&scif1 { ++ pinctrl-0 = <&scif1_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++}; ++ ++&hscif0 { ++ pinctrl-0 = <&hscif0_pins>; ++ pinctrl-names = "default"; ++ uart-has-rtscts; ++ ++ status = "okay"; ++}; ++ ++&hscif1 { ++ pinctrl-0 = <&hscif1_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++}; ++ ++&hscif4 { ++ /delete-property/pinctrl-0; ++ /delete-property/pinctrl-names; ++ ++ status = "disabled"; ++}; ++ ++&i2c2 { ++ /delete-node/pca9535@20; ++ /delete-node/pca9535@21; ++ ++ gpio_ext_74: pca9539@74 { ++ compatible = "nxp,pca9539"; ++ reg = <0x74>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio6>; ++ interrupts = <8 IRQ_TYPE_EDGE_FALLING>; ++ ++ hub_pwen { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "HUB pwen"; ++ }; ++ hub_rst { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "HUB rst"; ++ }; ++ otg_offvbus { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "OTG off VBUSn"; ++ }; ++ otg_extlpn { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "OTG EXTLPn"; ++ }; ++ otg_stat1 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "OTG Stat1"; ++ }; ++ otg_stat2 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "OTG Stat2"; ++ }; ++ }; ++ ++ gpio_ext_75: pca9539@75 { ++ compatible = "nxp,pca9539"; ++ reg = <0x75>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio6>; ++ interrupts = <4 IRQ_TYPE_EDGE_FALLING>; ++ ++ gps_rst { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "GPS rst"; ++ }; ++ fpdl_shdn { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "FPDLink shdn"; ++ }; ++ }; ++}; ++ ++&i2cswitch2 { ++ reg = <0x71>; ++ reset-gpios= <&gpio5 3 GPIO_ACTIVE_LOW>; ++ ++ i2c@4 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <4>; ++ ++ hdmi@3d { ++ compatible = "adi,adv7511w"; ++ reg = <0x3d>; ++ interrupt-parent = <&gpio2>; ++ interrupts = <0 IRQ_TYPE_EDGE_BOTH>; ++ pd-gpios = <&gpio_ext_75 5 GPIO_ACTIVE_LOW>; ++ ++ adi,input-depth = <8>; ++ adi,input-colorspace = "rgb"; ++ adi,input-clock = "1x"; ++ adi,input-style = <1>; ++ adi,input-justification = "evenly"; ++ adi,clock-delay = <1200>; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ adv7513_in: endpoint { ++ remote-endpoint = <&du_out_rgb>; ++ }; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ adv7513_out: endpoint { ++ remote-endpoint = <&hdmi_con>; ++ }; ++ }; ++ }; ++ }; ++ }; ++}; ++ ++&i2c4 { ++ /delete-node/pca9535@21; ++ ++ gpio_ext_76: pca9539@76 { ++ compatible = "nxp,pca9539"; ++ reg = <0x76>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio7>; ++ interrupts = <3 IRQ_TYPE_EDGE_FALLING>; ++ ++ port_b_a0 { ++ gpio-hog; ++ gpios = <0 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B A0"; ++ }; ++ port_b_a1 { ++ gpio-hog; ++ gpios = <1 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B A1"; ++ }; ++ port_a_a0 { ++ gpio-hog; ++ gpios = <2 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A A0"; ++ }; ++ port_a_a1 { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A A1"; ++ }; ++ cmos_pwdn { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "CMOS PWDN"; ++ }; ++ cmos_rst { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "CMOS RST"; ++ }; ++ /* pin 12 - CAM_CLK */ ++ rpi_cam_io_1 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "RaspB_IO1"; ++ }; ++ /* pin 11 - CAM_GPIO - assume pwdn */ ++ rpi_cam_io_0 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "RaspB_IO0"; ++ }; ++ sam_rst { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "SAM RST"; ++ }; ++ sam_pwr { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "SAM PWR"; ++ }; ++ /* 0 - FPDLink output, 1 - LVDS output */ ++ lvds_vs_fpdl { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "LVDS switch"; ++ }; ++ }; ++ ++ gpio_ext_77: pca9539@77 { ++ compatible = "nxp,pca9539"; ++ reg = <0x77>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio5>; ++ interrupts = <9 IRQ_TYPE_EDGE_FALLING>; ++ ++ mpcie_wake { ++ gpio-hog; ++ gpios = <0 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "mPCIe WAKE#"; ++ }; ++ mpcie_wdisable { ++ gpio-hog; ++ gpios = <1 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "mPCIe W_DISABLE"; ++ }; ++ mpcie_clreq { ++ gpio-hog; ++ gpios = <2 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "mPCIe CLKREQ#"; ++ }; ++ mpcie_ovc { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "mPCIe OVC"; ++ }; ++ }; ++}; ++ ++&i2cswitch4 { ++ reg = <0x71>; ++ reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>; ++}; ++ ++&wlcore { ++ interrupts = <25 IRQ_TYPE_EDGE_FALLING>; ++}; ++ ++&pciec1 { ++ pcie3v3-supply = <&mpcie_3v3>; ++ pcie1v8-supply = <&mpcie_1v8>; ++}; +diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-alfa.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-alfa.dts +new file mode 100644 +index 0000000..6b13f07 +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-alfa.dts +@@ -0,0 +1,22 @@ ++/* ++ * Device Tree Source for the H3ULCB.HAD board Alfa side on r8a7795 ES1.x ++ * ++ * Copyright (C) 2017 Renesas Electronics Corp. ++ * Copyright (C) 2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++#include "r8a7795-es1-h3ulcb-had.dtsi" ++ ++/ { ++ model = "Renesas H3ULCB.HAD board Alfa side based on r8a7795"; ++}; ++ ++&pciec0 { ++ status = "okay"; ++ ++ /* Root complex */ ++}; +diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-beta.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-beta.dts +new file mode 100644 +index 0000000..2f8b274 +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had-beta.dts +@@ -0,0 +1,23 @@ ++/* ++ * Device Tree Source for the H3ULCB.HAD board Beta side on r8a7795 ES1.x ++ * ++ * Copyright (C) 2017 Renesas Electronics Corp. ++ * Copyright (C) 2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++#include "r8a7795-es1-h3ulcb-had.dtsi" ++ ++/ { ++ model = "Renesas H3ULCB.HAD board Beta side based on r8a7795"; ++}; ++ ++&pciec0 { ++ status = "okay"; ++ ++ /* Endpoint */ ++ endpoint; ++}; +diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi +new file mode 100644 +index 0000000..d50ff7a +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-had.dtsi +@@ -0,0 +1,225 @@ ++/* ++ * Device Tree Source for the H3ULCB.HAD board on r8a7795 ES1.x ++ * ++ * Copyright (C) 2016-2017 Renesas Electronics Corp. ++ * Copyright (C) 2016-2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++/* ++ * MSIOF0 - /dev/spidev1.0 connected to FPGA ethernet switch (both sides) ++ * MSIOF1 - /dev/spidev2.0 connected to RH850 (sideA to CSIH1, sideB to CSIH0) ++ */ ++ ++#include "r8a7795-es1-h3ulcb-view.dts" ++ ++/ { ++ model = "Renesas H3ULCB.HAD board based on r8a7795"; ++ ++ aliases { ++ serial1 = &scif1; ++ spi1 = &spi0_gpio; ++ spi2 = &spi1_gpio; ++ }; ++ ++ chosen { ++ stdout-path = "serial1:115200n8"; ++ }; ++ ++ spi0_gpio: spi_gpio@0 { ++ compatible = "spi-gpio"; ++ num-chipselects = <1>; ++ gpio-sck = <&gpio5 17 0>; ++ gpio-mosi = <&gpio5 20 0>; ++ gpio-miso = <&gpio5 22 0>; ++ cs-gpios = <&gpio5 19 0>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ spidev@0 { ++ compatible = "spi-gpio"; ++ reg = <0>; ++ spi-max-frequency = <2000000>; ++ spi-cpha; ++ spi-cpol; ++ }; ++ }; ++ ++ spi1_gpio: spi_gpio@1 { ++ compatible = "spi-gpio"; ++ num-chipselects = <1>; ++ gpio-sck = <&gpio6 8 0>; ++ gpio-mosi = <&gpio6 7 0>; ++ gpio-miso = <&gpio6 10 0>; ++ cs-gpios = <&gpio6 5 0>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ spidev@0 { ++ compatible = "spi-gpio"; ++ reg = <0>; ++ spi-max-frequency = <2000000>; ++ spi-cpha; ++ spi-cpol; ++ }; ++ }; ++ ++ hdmi1-out { ++ compatible = "hdmi-connector"; ++ type = "a"; ++ ++ port { ++ hdmi1_con: endpoint { ++ remote-endpoint = <&rcar_dw_hdmi1_out>; ++ }; ++ }; ++ }; ++}; ++ ++&du { ++ ports { ++ port@1 { ++ endpoint { ++ remote-endpoint = <&rcar_dw_hdmi0_in>; ++ }; ++ }; ++ port@2 { ++ endpoint { ++ remote-endpoint = <&rcar_dw_hdmi1_in>; ++ }; ++ }; ++ }; ++}; ++ ++&hdmi1 { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ port@0 { ++ reg = <0>; ++ rcar_dw_hdmi1_in: endpoint { ++ remote-endpoint = <&du_out_hdmi1>; ++ }; ++ }; ++ port@1 { ++ reg = <1>; ++ rcar_dw_hdmi1_out: endpoint { ++ remote-endpoint = <&hdmi1_con>; ++ }; ++ }; ++ }; ++}; ++ ++&pfc { ++ scif1_pins: scif1 { ++ groups = "scif1_data_a"; ++ function = "scif1"; ++ }; ++ ++ msiof0_pins: spi1 { ++ groups = "msiof0_clk", "msiof0_rxd", "msiof0_txd", ++ "msiof0_ss1"; ++ function = "msiof0"; ++ }; ++ ++ msiof1_pins: spi2 { ++ groups = "msiof1_clk_a", "msiof1_rxd_a", "msiof1_txd_a", ++ "msiof1_ss1_a"; ++ function = "msiof1"; ++ }; ++ ++ sound_clk_pins: sound-clk { ++ groups = "audio_clk_a_a", "audio_clk_b_a", "audio_clk_c_a", ++ "audio_clkout_a" /*, "audio_clkout3_a"*/; ++ function = "audio_clk"; ++ }; ++ ++ usb31_pins: usb31 { ++ groups = "usb31"; ++ function = "usb31"; ++ }; ++ ++ can0_pins: can0 { ++ groups = "can0_data_a"; ++ function = "can0"; ++ }; ++ ++ canfd0_pins: canfd0 { ++ groups = "canfd0_data_a"; ++ function = "canfd0"; ++ }; ++}; ++ ++&scif1 { ++ pinctrl-0 = <&scif1_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++}; ++ ++&avb { ++ /delete-property/phy-handle; ++ /delete-property/phy-gpios; ++ /delete-node/ethernet-phy@0; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++}; ++ ++&msiof0 { ++ pinctrl-0 = <&msiof0_pins>; ++ pinctrl-names = "default"; ++ status = "disabled"; ++ cs-gpios = <&gpio5 19 0>; ++ ++ spidev@0 { ++ compatible = "renesas,sh-msiof"; ++ reg = <0>; ++ spi-max-frequency = <66666666>; ++ spi-cpha; ++ spi-cpol; ++ }; ++}; ++ ++&msiof1 { ++ status = "disabled"; ++ cs-gpios = <&gpio6 5 0>; ++}; ++ ++&can0 { ++ pinctrl-0 = <&can0_pins>; ++ pinctrl-names = "default"; ++ status = "disabled"; ++ ++ renesas,can-clock-select = <0x0>; ++ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH /* enable - shared with camera board */ ++ &gpio2 7 GPIO_ACTIVE_LOW /* standby */ ++ >; ++}; ++ ++&canfd { ++ pinctrl-0 = <&canfd0_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ ++ renesas,can-clock-select = <0x0>; ++ gpios = <&gpio2 6 GPIO_ACTIVE_HIGH /* enable - shared with camera board */ ++ &gpio2 7 GPIO_ACTIVE_LOW /* standby */ ++ >; ++ ++ channel0 { ++ status = "okay"; ++ }; ++}; ++ ++&xhci1 { ++ status = "okay"; ++ pinctrl-0 = <&usb31_pins>; ++ pinctrl-names = "default"; ++}; +diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts +new file mode 100644 +index 0000000..f117af0 +--- /dev/null ++++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts +@@ -0,0 +1,1910 @@ ++/* ++ * Device Tree Source for the H3ULCB Kingfisher board on r8a7795 ES1.x ++ * ++ * Copyright (C) 2017 Renesas Electronics Corp. ++ * Copyright (C) 2017 Cogent Embedded, Inc. ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++#include "r8a7795-es1-h3ulcb.dts" ++ ++/ { ++ model = "Renesas H3ULCB Kingfisher board based on r8a7795"; ++ ++ aliases { ++ serial1 = &hscif0; ++ serial2 = &hscif1; ++ serial3 = &scif1; ++ }; ++ ++ snd_clk: snd_clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <24576000>; ++ clock-output-names = "scki"; ++ }; ++ ++ wlan_en: regulator@4 { ++ compatible = "regulator-fixed"; ++ regulator-name = "wlan-en-regulator"; ++ ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_74 4 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ }; ++ ++ vcc_sdhi3: regulator@41 { ++ compatible = "regulator-fixed"; ++ ++ regulator-name = "SDHI3 Vcc"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ }; ++ ++ vccq_sdhi3: regulator@5 { ++ compatible = "regulator-fixed"; ++ ++ regulator-name = "SDHI3 VccQ"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ }; ++ ++ codec_en_reg: regulator@6 { ++ compatible = "regulator-fixed"; ++ regulator-name = "codec-en-regulator"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_74 15 0>; ++ ++ /* delay - CHECK */ ++ startup-delay-us = <70000>; ++ enable-active-high; ++ }; ++ ++ amp_en_reg: regulator@7 { ++ compatible = "regulator-fixed"; ++ regulator-name = "amp-en-regulator"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ ++ gpio = <&gpio_ext_74 0 0>; ++ ++ startup-delay-us = <0>; ++ enable-active-high; ++ }; ++ ++ sdio_switch: regulator@9 { ++ compatible = "regulator-fixed"; ++ regulator-name = "wifi_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_74 5 0>; ++ enable-active-low; ++ regulator-always-on; ++ }; ++ ++ radio_switch: regulator@11 { ++ compatible = "regulator-fixed"; ++ regulator-name = "radio_on"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_74 13 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ regulator-always-on; ++ }; ++ ++ mpcie_3v3: regulator@12 { ++ compatible = "regulator-fixed"; ++ regulator-name = "mPCIe 3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&gpio_ext_77 14 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ }; ++ ++ mpcie_1v8: regulator@13 { ++ compatible = "regulator-fixed"; ++ regulator-name = "mPCIe 1v8"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ gpio = <&gpio_ext_77 15 GPIO_ACTIVE_HIGH>; ++ startup-delay-us = <200000>; ++ enable-active-high; ++ }; ++ ++ kim { ++ compatible = "kim"; ++ nshutdown_gpio = <343>; /* gpio_ext_74 pin 3 */ ++ /* serial1 */ ++ dev_name = "/dev/ttySC1"; ++ flow_cntrl = <1>; ++ /* int div 8 hscif@26.6666656MHz */ ++ baud_rate = <3333332>; ++ }; ++ ++ btwilink { ++ compatible = "btwilink"; ++ }; ++ ++ sound_ext: sound@0 { ++ pinctrl-0 = <&sound_0_pins>; ++ pinctrl-names = "default"; ++ compatible = "simple-audio-card"; ++ ++ simple-audio-card,format = "left_j"; ++ simple-audio-card,name = "pcm3168a"; ++ ++ simple-audio-card,bitclock-master = <&sound_ext_master>; ++ simple-audio-card,frame-master = <&sound_ext_master>; ++ sound_ext_master: simple-audio-card,cpu@0 { ++ sound-dai = <&rcar_sound 0>; ++ dai-tdm-slot-num = <8>; ++ dai-tdm-slot-width = <32>; ++ }; ++ ++ simple-audio-card,codec@0 { ++ sound-dai = <&pcm3168a>; ++ dai-tdm-slot-num = <8>; ++ dai-tdm-slot-width = <32>; ++ system-clock-frequency = <24576000>; ++ }; ++ }; ++ ++ /delete-node/sound; ++ ++ rsnd_ak4613: sound@1 { ++ pinctrl-0 = <&sound_1_pins>; ++ pinctrl-names = "default"; ++ compatible = "simple-audio-card"; ++ ++ simple-audio-card,format = "left_j"; ++ simple-audio-card,name = "ak4613"; ++ ++ simple-audio-card,bitclock-master = <&sndcpu>; ++ simple-audio-card,frame-master = <&sndcpu>; ++ ++ sndcpu: simple-audio-card,cpu@1 { ++ sound-dai = <&rcar_sound 1>; ++ }; ++ ++ sndcodec: simple-audio-card,codec@1 { ++ sound-dai = <&ak4613>; ++ }; ++ }; ++ ++ sound_radio: sound@2 { ++ pinctrl-0 = <&sound_2_pins>; ++ pinctrl-names = "default"; ++ compatible = "simple-audio-card"; ++ ++ simple-audio-card,format = "i2s"; ++ simple-audio-card,name = "radio"; ++ ++ simple-audio-card,bitclock-master = <&sound_radio_master>; ++ simple-audio-card,frame-master = <&sound_radio_master>; ++ simple-audio-card,cpu@2 { ++ sound-dai = <&rcar_sound 2>; ++ }; ++ ++ sound_radio_master: simple-audio-card,codec@2 { ++ sound-dai = <&radio>; ++ system-clock-frequency = <12288000>; ++ }; ++ }; ++ ++ lvds-encoder { ++ compatible = "thine,thc63lvdm83d"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ port@0 { ++ reg = <0>; ++ lvds_enc_in: endpoint { ++ remote-endpoint = <&du_out_lvds0>; ++ }; ++ }; ++ port@1 { ++ reg = <1>; ++ lvds_enc_out: endpoint { ++ remote-endpoint = <&lvds_in>; ++ }; ++ }; ++ }; ++ }; ++ ++ lvds { ++ compatible = "lvds-connector"; ++ ++ width-mm = <210>; ++ height-mm = <158>; ++ ++ panel-timing { ++ /* 1280x800 @60Hz */ ++ clock-frequency = <65000000>; ++ hactive = <1280>; ++ vactive = <800>; ++ hsync-len = <40>; ++ hfront-porch = <80>; ++ hback-porch = <40>; ++ vfront-porch = <14>; ++ vback-porch = <14>; ++ vsync-len = <4>; ++ }; ++ ++ port { ++ lvds_in: endpoint { ++ remote-endpoint = <&lvds_enc_out>; ++ }; ++ }; ++ }; ++ ++ hdmi-out { ++ compatible = "hdmi-connector"; ++ type = "a"; ++ ++ port { ++ hdmi_con: endpoint { ++ remote-endpoint = <&adv7513_out>; ++ }; ++ }; ++ }; ++ ++ radio: si468x@0 { ++ compatible = "si,si468x-pcm"; ++ status = "okay"; ++ ++ #sound-dai-cells = <0>; ++ }; ++}; ++ ++&pfc { ++ scif1_pins: scif1 { ++ groups = "scif1_data_b"; ++ function = "scif1"; ++ }; ++ ++ hscif0_pins: hscif0 { ++ groups = "hscif0_data", "hscif0_ctrl"; ++ function = "hscif0"; ++ }; ++ ++ hscif1_pins: hscif1 { ++ groups = "hscif1_data_a", "hscif1_ctrl_a"; ++ function = "hscif1"; ++ }; ++ ++ du_pins: du { ++ groups = "du_rgb888", "du_sync", "du_clk_out_0", "du_disp"; ++ function = "du"; ++ }; ++ ++ sdhi3_pins_3v3: sd3_3v3 { ++ groups = "sdhi3_data4", "sdhi3_ctrl"; ++ function = "sdhi3"; ++ power-source = <3300>; ++ }; ++ ++ sdhi3_pins_1v8: sd3_1v8 { ++ groups = "sdhi3_data4", "sdhi3_ctrl"; ++ function = "sdhi3"; ++ power-source = <1800>; ++ }; ++ ++ sound_0_pins: sound0 { ++ groups = "ssi34_ctrl", "ssi3_data", "ssi4_data"; ++ function = "ssi"; ++ }; ++ ++ sound_1_pins: sound1 { ++ groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data_a"; ++ function = "ssi"; ++ }; ++ ++ sound_2_pins: sound2 { ++ groups = "ssi6_ctrl", "ssi6_data"; ++ function = "ssi"; ++ }; ++ ++ sound_3_pins: sound3 { ++ groups = "ssi78_ctrl", "ssi7_data", "ssi8_data"; ++ function = "ssi"; ++ }; ++ ++ usb0_pins: usb0 { ++ groups = "usb0"; ++ function = "usb0"; ++ }; ++ ++ can0_pins: can0 { ++ groups = "can0_data_a"; ++ function = "can0"; ++ }; ++ ++ can1_pins: can1 { ++ groups = "can1_data"; ++ function = "can1"; ++ }; ++ ++ canfd0_pins: canfd0 { ++ groups = "canfd0_data_a"; ++ function = "canfd0"; ++ }; ++ ++ canfd1_pins: canfd1 { ++ groups = "canfd1_data"; ++ function = "canfd1"; ++ }; ++}; ++ ++&du { ++ pinctrl-0 = <&du_pins>; ++ pinctrl-names = "default"; ++ ++ ports { ++ port@0 { ++ endpoint { ++ remote-endpoint = <&adv7513_in>; ++ }; ++ }; ++ port@3 { ++ endpoint { ++ remote-endpoint = <&lvds_enc_in>; ++ }; ++ }; ++ }; ++}; ++ ++&gpio2 { ++ bl_pwm { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "BL PWM 100%"; ++ }; ++}; ++ ++&gpio6 { ++ audio_sw { ++ gpio-hog; ++ gpios = <21 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Onboard MCh Audio"; ++ }; ++}; ++ ++&scif1 { ++ pinctrl-0 = <&scif1_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++}; ++ ++&hscif0 { ++ pinctrl-0 = <&hscif0_pins>; ++ pinctrl-names = "default"; ++ uart-has-rtscts; ++ ++ status = "okay"; ++}; ++ ++&hscif1 { ++ pinctrl-0 = <&hscif1_pins>; ++ pinctrl-names = "default"; ++ ++ status = "okay"; ++}; ++ ++&i2c2 { ++ clock-frequency = <100000>; ++ ++ gpio_ext_74: pca9539@74 { ++ compatible = "nxp,pca9539"; ++ reg = <0x74>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio6>; ++ interrupts = <8 IRQ_TYPE_EDGE_FALLING>; ++ ++ hub_pwen { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "HUB pwen"; ++ }; ++ hub_rst { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "HUB rst"; ++ }; ++ otg_offvbus { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "OTG off VBUSn"; ++ }; ++ otg_extlpn { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "OTG EXTLPn"; ++ }; ++ otg_stat1 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "OTG Stat1"; ++ }; ++ otg_stat2 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "OTG Stat2"; ++ }; ++ }; ++ ++ gpio_ext_75: pca9539@75 { ++ compatible = "nxp,pca9539"; ++ reg = <0x75>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio6>; ++ interrupts = <4 IRQ_TYPE_EDGE_FALLING>; ++ ++ gps_rst { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "GPS rst"; ++ }; ++ fpdl_shdn { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "FPDLink shdn"; ++ }; ++ }; ++ ++ i2cswitch2: pca9548@74 { ++ compatible = "nxp,pca9548"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x71>; ++ reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; ++ ++ i2c@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ /* BCM node(s) */ ++ }; ++ ++ i2c@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <1>; ++ /* USB3.0 HUB node(s) */ ++ }; ++ ++ i2c@2 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <2>; ++ /* Power amp node(s) */ ++ }; ++ ++ i2c@3 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <3>; ++ /* Radio node(s) */ ++ }; ++ ++ i2c@4 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <4>; ++ ++ hdmi@3d { ++ compatible = "adi,adv7511w"; ++ reg = <0x3d>; ++ interrupt-parent = <&gpio2>; ++ interrupts = <0 IRQ_TYPE_EDGE_BOTH>; ++ pd-gpios = <&gpio_ext_75 5 GPIO_ACTIVE_LOW>; ++ ++ adi,input-depth = <8>; ++ adi,input-colorspace = "rgb"; ++ adi,input-clock = "1x"; ++ adi,input-style = <1>; ++ adi,input-justification = "evenly"; ++ adi,clock-delay = <1200>; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ adv7513_in: endpoint { ++ remote-endpoint = <&du_out_rgb>; ++ }; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ adv7513_out: endpoint { ++ remote-endpoint = <&hdmi_con>; ++ }; ++ }; ++ }; ++ }; ++ }; ++ ++ i2c@5 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <5>; ++ /* PCIe node(s) */ ++ }; ++ ++ i2c@6 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <6>; ++ /* LVDS display node(s) */ ++ ++ polytouch: edt-ft5x06@38 { ++ compatible = "edt,edt-ft5x06"; ++ reg = <0x38>; ++ interrupt-parent = <&gpio5>; ++ interrupts = <6 IRQ_TYPE_EDGE_FALLING>; ++ }; ++ }; ++ ++ i2c@7 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <7>; ++ /* Audio, GPS and Gyro node(s) */ ++ ++ pcm3168a: audio-codec@44 { ++ #sound-dai-cells = <0>; ++ compatible = "ti,pcm3168a"; ++ reg = <0x44>; ++ clocks = <&snd_clk>; ++ clock-names = "scki"; ++ tdm; ++ VDD1-supply = <&codec_en_reg>; ++ VDD2-supply = <&codec_en_reg>; ++ VCCAD1-supply = <&codec_en_reg>; ++ VCCAD2-supply = <&codec_en_reg>; ++ VCCDA1-supply = <&_en_reg>; ++ VCCDA2-supply = <&_en_reg>; ++ }; ++ ++ lsm9ds0_acc_mag@1d { ++ compatible = "st,lsm9ds0_accel_magn"; ++ reg = <0x1d>; ++ }; ++ ++ lsm9ds0_gyr@6b { ++ compatible = "st,lsm9ds0_gyro"; ++ reg = <0x6b>; ++ }; ++ ++ /* GPS@ 0x42 */ ++ }; ++ }; ++}; ++ ++&i2c4 { ++ gpio_ext_76: pca9539@76 { ++ compatible = "nxp,pca9539"; ++ reg = <0x76>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio7>; ++ interrupts = <3 IRQ_TYPE_EDGE_FALLING>; ++ ++ port_b_a0 { ++ gpio-hog; ++ gpios = <0 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B A0"; ++ }; ++ port_b_a1 { ++ gpio-hog; ++ gpios = <1 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B A1"; ++ }; ++ port_a_a0 { ++ gpio-hog; ++ gpios = <2 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A A0"; ++ }; ++ port_a_a1 { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A A1"; ++ }; ++ cmos_pwdn { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "CMOS PWDN"; ++ }; ++ cmos_rst { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "CMOS RST"; ++ }; ++ /* pin 12 - CAM_CLK */ ++ rpi_cam_io_1 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "RaspB_IO1"; ++ }; ++ /* pin 11 - CAM_GPIO - assume pwdn */ ++ rpi_cam_io_0 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "RaspB_IO0"; ++ }; ++ sam_rst { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "SAM RST"; ++ }; ++ sam_pwr { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "SAM PWR"; ++ }; ++ /* 0 - FPDLink output, 1 - LVDS output */ ++ lvds_vs_fpdl { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "LVDS switch"; ++ }; ++ }; ++ ++ gpio_ext_77: pca9539@77 { ++ compatible = "nxp,pca9539"; ++ reg = <0x77>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio5>; ++ interrupts = <9 IRQ_TYPE_EDGE_FALLING>; ++ ++ mpcie_wake { ++ gpio-hog; ++ gpios = <0 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "mPCIe WAKE#"; ++ }; ++ mpcie_wdisable { ++ gpio-hog; ++ gpios = <1 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "mPCIe W_DISABLE"; ++ }; ++ mpcie_clreq { ++ gpio-hog; ++ gpios = <2 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "mPCIe CLKREQ#"; ++ }; ++ mpcie_ovc { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "mPCIe OVC"; ++ }; ++ }; ++ ++ i2cswitch4: pca9548@74 { ++ compatible = "nxp,pca9548"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x71>; ++ reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>; ++ ++ i2c@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0>; ++ /* SAM node(s) */ ++ }; ++ ++ i2c@1 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <1>; ++ /* Slot A (CN10) */ ++ ++ ov106xx@0 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x60>; ++ ++ port@0 { ++ ov106xx_in0: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin0ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep0: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep0>; ++ }; ++ ov106xx_ti964_des0ep0: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep0>; ++ }; ++ ov106xx_ti954_des0ep0: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep0>; ++ }; ++ }; ++ }; ++ ++ ov106xx@1 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x61>; ++ ++ port@0 { ++ ov106xx_in1: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin1ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep1: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep1>; ++ }; ++ ov106xx_ti964_des0ep1: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep1>; ++ }; ++ ov106xx_ti954_des0ep1: endpoint@2 { ++ remote-endpoint = <&ti954_des0ep1>; ++ }; ++ }; ++ }; ++ ++ ov106xx@2 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x62>; ++ ++ port@0 { ++ ov106xx_in2: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin2ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep2: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep2>; ++ }; ++ ov106xx_ti964_des0ep2: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep2>; ++ }; ++ }; ++ }; ++ ++ ov106xx@3 { ++ compatible = "ovti,ov106xx"; ++ reg = <0x63>; ++ ++ port@0 { ++ ov106xx_in3: endpoint { ++ clock-lanes = <0>; ++ data-lanes = <1 2 3 4>; ++ remote-endpoint = <&vin3ep0>; ++ }; ++ }; ++ port@1 { ++ ov106xx_max9286_des0ep3: endpoint@0 { ++ remote-endpoint = <&max9286_des0ep3>; ++ }; ++ ov106xx_ti964_des0ep3: endpoint@1 { ++ remote-endpoint = <&ti964_des0ep3>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB964 @ 0x3a */ ++ ti964-ti9x3@0 { ++ compatible = "ti,ti964-ti9x3"; ++ reg = <0x3a>; ++ ti,sensor_delay = <350>; ++ ti,links = <4>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "coax"; ++ ++ port@0 { ++ ti964_des0ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ ti964_des0ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ ti964_des0ep2: endpoint@2 { ++ ti9x3-addr = <0x0e>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ ti964_des0ep3: endpoint@3 { ++ ti9x3-addr = <0x0f>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ ti964_csi0ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ ++ /* DS90UB954 @ 0x38 */ ++ ti954-ti9x3@0 { ++ compatible = "ti,ti954-ti9x3"; ++ reg = <0x38>; ++ /* gpios = <&video_a_ext1 10 GPIO_ACTIVE_HIGH>; */ ++ ti,sensor_delay = <350>; ++ ti,links = <2>; ++ ti,lanes = <4>; ++ ti,forwarding-mode = "round-robin"; ++ ti,cable-mode = "coax"; ++ ++ port@0 { ++ ti954_des0ep0: endpoint@0 { ++ ti9x3-addr = <0x0c>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ ti954_des0ep1: endpoint@1 { ++ ti9x3-addr = <0x0d>; ++ dvp-order = <0>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ }; ++ port@1 { ++ ti954_csi0ep0: endpoint { ++ csi-rate = <1450>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ ++ /* MAX9286 @ 0x2c */ ++ max9286-max9271@0 { ++ compatible = "maxim,max9286-max9271"; ++ reg = <0x2c>; ++ maxim,sensor_delay = <350>; ++ maxim,links = <4>; ++ maxim,lanes = <4>; ++ maxim,resetb-gpio = <1>; ++ maxim,fsync-mode = "automatic"; ++ maxim,timeout = <100>; ++ ++ port@0 { ++ max9286_des0ep0: endpoint@0 { ++ max9271-addr = <0x50>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in0>; ++ }; ++ max9286_des0ep1: endpoint@1 { ++ max9271-addr = <0x51>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in1>; ++ }; ++ max9286_des0ep2: endpoint@2 { ++ max9271-addr = <0x52>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in2>; ++ }; ++ max9286_des0ep3: endpoint@3 { ++ max9271-addr = <0x53>; ++ dvp-order = <1>; ++ remote-endpoint = <&ov106xx_in3>; ++ }; ++ }; ++ port@1 { ++ max9286_csi0ep0: endpoint { ++ csi-rate = <700>; ++ remote-endpoint = <&csi2_40_ep>; ++ }; ++ }; ++ }; ++ }; ++ + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; @@ -1814,6 +7622,13 @@ index 0000000..897da81 + }; + }; + ++ i2c@3 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <3>; ++ /* MOST node(s) */ ++ }; ++ + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; @@ -2432,15 +8247,16 @@ index 0000000..897da81 +}; + +&rcar_sound { -+ pinctrl-0 = <&sound_clk_pins>; ++ pinctrl-0 = <&sound_clk_pins &sound_3_pins>; ++ pinctrl-names = "default"; + + /* Multi DAI */ + #sound-dai-cells = <1>; + + rcar_sound,dai { + dai0 { -+ playback = <&ssi7>; -+ capture = <&ssi8>; ++ playback = <&ssi3>; ++ capture = <&ssi4>; + }; + + dai1 { @@ -2451,12 +8267,18 @@ index 0000000..897da81 + dai2 { + capture = <&ssi6>; + }; ++ ++ dai3 { ++ playback = <&ssi7>; ++ capture = <&ssi8>; ++ }; + }; +}; + +&sdhi3 { + pinctrl-0 = <&sdhi3_pins_3v3>; -+ pinctrl-names = "default"; ++ pinctrl-1 = <&sdhi3_pins_1v8>; ++ pinctrl-names = "default", "state_uhs"; + + vmmc-supply = <&wlan_en>; + vqmmc-supply = <&vccq_sdhi3>; @@ -2475,7 +8297,7 @@ index 0000000..897da81 + compatible = "ti,wl1837"; + reg = <2>; + interrupt-parent = <&gpio1>; -+ interrupts = <25 IRQ_TYPE_EDGE_RISING>; ++ interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + }; +}; + @@ -2536,19 +8358,24 @@ index 0000000..897da81 + }; +}; + -+&ssi8 { ++&ssi4 { + shared-pin; +}; + -+/* uncomment to enable CN48 on VIN4 */ -+//#include "ulcb-kf-rpi.dtsi" ++&pciec1 { ++ pcie3v3-supply = <&mpcie_3v3>; ++ pcie1v8-supply = <&mpcie_1v8>; ++}; ++ +/* uncomment to enable CN47: SD on SDHI3 */ +//#include "ulcb-kf-sd3.dtsi" -+/* uncomment to override CN29 (CMOS camera) on VIN5 */ ++/* CN48 (Raspberry Pi) on VIN4 */ ++//#include "ulcb-kf-rpi.dtsi" ++/* CN29: (CMOS camera) on VIN5 */ +//#include "ulcb-kf-cmos.dtsi" diff --git a/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts new file mode 100644 -index 0000000..bf550b7 +index 0000000..e5734aa --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-vb.dts @@ -0,0 +1,1787 @@ @@ -5731,487 +11558,12 @@ index 0000000..4a00426 + status = "okay"; + }; +}; -diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts -new file mode 100644 -index 0000000..f3e5bda ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf-v1.dts -@@ -0,0 +1,469 @@ -+/* -+ * Device Tree Source for the H3ULCB Kingfisher V1 board -+ * -+ * Copyright (C) 2017 Renesas Electronics Corp. -+ * Copyright (C) 2017 Cogent Embedded, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+#include "r8a7795-h3ulcb-kf.dts" -+ -+/ { -+ model = "Renesas H3ULCB Kingfisher V1 board based on r8a7795"; -+ -+ aliases { -+ serial1 = &hscif0; -+ serial2 = &hscif1; -+ serial3 = &scif1; -+ }; -+ -+ wlan_en: regulator@4 { -+ compatible = "regulator-fixed"; -+ regulator-name = "wlan-en-regulator"; -+ -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ gpio = <&gpio_ext_74 4 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ }; -+ -+ codec_en_reg: regulator@6 { -+ compatible = "regulator-fixed"; -+ regulator-name = "codec-en-regulator"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ gpio = <&gpio_ext_74 15 0>; -+ -+ /* delay - CHECK */ -+ startup-delay-us = <70000>; -+ enable-active-high; -+ }; -+ -+ amp_en_reg: regulator@7 { -+ compatible = "regulator-fixed"; -+ regulator-name = "amp-en-regulator"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ gpio = <&gpio_ext_74 0 0>; -+ -+ startup-delay-us = <0>; -+ enable-active-high; -+ }; -+ -+ /delete-node/regulator@8; -+ -+ sdio_switch: regulator@9 { -+ compatible = "regulator-fixed"; -+ regulator-name = "wifi_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_74 5 0>; -+ enable-active-low; -+ regulator-always-on; -+ }; -+ -+ /delete-node/regulator@10; -+ -+ radio_switch: regulator@11 { -+ compatible = "regulator-fixed"; -+ regulator-name = "radio_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_74 13 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ -+ mpcie_3v3: regulator@12 { -+ compatible = "regulator-fixed"; -+ regulator-name = "mPCIe 3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_77 14 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ }; -+ -+ mpcie_1v8: regulator@13 { -+ compatible = "regulator-fixed"; -+ regulator-name = "mPCIe 1v8"; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <1800000>; -+ gpio = <&gpio_ext_77 15 GPIO_ACTIVE_HIGH>; -+ startup-delay-us = <200000>; -+ enable-active-high; -+ }; -+ -+ kim { -+ nshutdown_gpio = <343>; /* gpio_ext_74 pin 3 */ -+ }; -+ -+ hdmi-out { -+ compatible = "hdmi-connector"; -+ type = "a"; -+ -+ port { -+ hdmi_con: endpoint { -+ remote-endpoint = <&adv7513_out>; -+ }; -+ }; -+ }; -+}; -+ -+&pfc { -+ /delete-node/hscif4; -+ -+ scif1_pins: scif1 { -+ groups = "scif1_data_b"; -+ function = "scif1"; -+ }; -+ -+ hscif0_pins: hscif0 { -+ groups = "hscif0_data", "hscif0_ctrl"; -+ function = "hscif0"; -+ }; -+ -+ hscif1_pins: hscif1 { -+ groups = "hscif1_data_a", "hscif1_ctrl_a"; -+ function = "hscif1"; -+ }; -+ -+ du_pins: du { -+ groups = "du_rgb888", "du_sync", "du_clk_out_0", "du_disp"; -+ function = "du"; -+ }; -+}; -+ -+&du { -+ pinctrl-0 = <&du_pins>; -+ pinctrl-names = "default"; -+ -+ ports { -+ port@0 { -+ endpoint { -+ remote-endpoint = <&adv7513_in>; -+ }; -+ }; -+ port@1 { -+ endpoint { -+ remote-endpoint = <&rcar_dw_hdmi0_in>; -+ }; -+ }; -+ }; -+}; -+ -+&gpio0 { -+ /delete-node/video_a_irq; -+ /delete-node/video_b_irq; -+ /delete-node/gpioext_2_20_irq; -+}; -+ -+&gpio1 { -+ /delete-node/gpioext_2_21_irq; -+ /delete-node/wifi_irq; -+}; -+ -+&gpio2 { -+ bl_pwm { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "BL PWM 100%"; -+ }; -+}; -+ -+&gpio5 { -+ /delete-node/touch_irq; -+ /delete-node/bt_strap; -+}; -+ -+&gpio7 { -+ /delete-node/gpioext_2_21_irq; -+}; -+ -+&scif1 { -+ pinctrl-0 = <&scif1_pins>; -+ pinctrl-names = "default"; -+ -+ status = "okay"; -+}; -+ -+&hscif0 { -+ pinctrl-0 = <&hscif0_pins>; -+ pinctrl-names = "default"; -+ uart-has-rtscts; -+ -+ status = "okay"; -+}; -+ -+&hscif1 { -+ pinctrl-0 = <&hscif1_pins>; -+ pinctrl-names = "default"; -+ -+ status = "okay"; -+}; -+ -+&hscif4 { -+ /delete-property/pinctrl-0; -+ /delete-property/pinctrl-names; -+ -+ status = "disabled"; -+}; -+ -+&i2c2 { -+ /delete-node/pca9535@20; -+ /delete-node/pca9535@21; -+ -+ gpio_ext_74: pca9539@74 { -+ compatible = "nxp,pca9539"; -+ reg = <0x74>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio6>; -+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>; -+ -+ hub_pwen { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "HUB pwen"; -+ }; -+ hub_rst { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "HUB rst"; -+ }; -+ otg_offvbus { -+ gpio-hog; -+ gpios = <8 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "OTG off VBUSn"; -+ }; -+ otg_extlpn { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "OTG EXTLPn"; -+ }; -+ otg_stat1 { -+ gpio-hog; -+ gpios = <10 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "OTG Stat1"; -+ }; -+ otg_stat2 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "OTG Stat2"; -+ }; -+ }; -+ -+ gpio_ext_75: pca9539@75 { -+ compatible = "nxp,pca9539"; -+ reg = <0x75>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio6>; -+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>; -+ -+ gps_rst { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "GPS rst"; -+ }; -+ fpdl_shdn { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "FPDLink shdn"; -+ }; -+ }; -+}; -+ -+&i2cswitch2 { -+ reg = <0x71>; -+ reset-gpios= <&gpio5 3 GPIO_ACTIVE_LOW>; -+ -+ i2c@4 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <4>; -+ -+ hdmi@3d { -+ compatible = "adi,adv7511w"; -+ reg = <0x3d>; -+ interrupt-parent = <&gpio2>; -+ interrupts = <0 IRQ_TYPE_EDGE_BOTH>; -+ pd-gpios = <&gpio_ext_75 5 GPIO_ACTIVE_LOW>; -+ -+ adi,input-depth = <8>; -+ adi,input-colorspace = "rgb"; -+ adi,input-clock = "1x"; -+ adi,input-style = <1>; -+ adi,input-justification = "evenly"; -+ adi,clock-delay = <1200>; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ reg = <0>; -+ adv7513_in: endpoint { -+ remote-endpoint = <&du_out_rgb>; -+ }; -+ }; -+ -+ port@1 { -+ reg = <1>; -+ adv7513_out: endpoint { -+ remote-endpoint = <&hdmi_con>; -+ }; -+ }; -+ }; -+ }; -+ }; -+}; -+ -+&i2c4 { -+ /delete-node/pca9535@21; -+ -+ gpio_ext_76: pca9539@76 { -+ compatible = "nxp,pca9539"; -+ reg = <0x76>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio7>; -+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>; -+ -+ port_b_a0 { -+ gpio-hog; -+ gpios = <0 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-B A0"; -+ }; -+ port_b_a1 { -+ gpio-hog; -+ gpios = <1 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B A1"; -+ }; -+ port_a_a0 { -+ gpio-hog; -+ gpios = <2 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-A A0"; -+ }; -+ port_a_a1 { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A A1"; -+ }; -+ cmos_pwdn { -+ gpio-hog; -+ gpios = <8 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "CMOS PWDN"; -+ }; -+ cmos_rst { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "CMOS RST"; -+ }; -+ /* pin 12 - CAM_CLK */ -+ rpi_cam_io_1 { -+ gpio-hog; -+ gpios = <10 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "RaspB_IO1"; -+ }; -+ /* pin 11 - CAM_GPIO - assume pwdn */ -+ rpi_cam_io_0 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "RaspB_IO0"; -+ }; -+ sam_rst { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "SAM RST"; -+ }; -+ sam_pwr { -+ gpio-hog; -+ gpios = <5 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "SAM PWR"; -+ }; -+ /* 0 - FPDLink output, 1 - LVDS output */ -+ lvds_vs_fpdl { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "LVDS switch"; -+ }; -+ }; -+ -+ gpio_ext_77: pca9539@77 { -+ compatible = "nxp,pca9539"; -+ reg = <0x77>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio5>; -+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>; -+ -+ mpcie_wake { -+ gpio-hog; -+ gpios = <0 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "mPCIe WAKE#"; -+ }; -+ mpcie_wdisable { -+ gpio-hog; -+ gpios = <1 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "mPCIe W_DISABLE"; -+ }; -+ mpcie_clreq { -+ gpio-hog; -+ gpios = <2 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "mPCIe CLKREQ#"; -+ }; -+ mpcie_ovc { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "mPCIe OVC"; -+ }; -+ }; -+}; -+ -+&i2cswitch4 { -+ reg = <0x71>; -+ reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>; -+}; -+ -+&wlcore { -+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>; -+}; -+ -+&pciec1 { -+ pcie3v3-supply = <&mpcie_3v3>; -+ pcie1v8-supply = <&mpcie_1v8>; -+}; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts new file mode 100644 -index 0000000..71e8881 +index 0000000..5b61059 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts -@@ -0,0 +1,1712 @@ +@@ -0,0 +1,1906 @@ +/* + * Device Tree Source for the H3ULCB Kingfisher board on r8a7795 + * @@ -6229,7 +11581,9 @@ index 0000000..71e8881 + model = "Renesas H3ULCB Kingfisher board based on r8a7795"; + + aliases { -+ serial1 = &hscif4; ++ serial1 = &hscif0; ++ serial2 = &hscif1; ++ serial3 = &scif1; + }; + + snd_clk: snd_clk { @@ -6246,7 +11600,7 @@ index 0000000..71e8881 + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + -+ gpio = <&gpio_ext_20 4 GPIO_ACTIVE_HIGH>; ++ gpio = <&gpio_ext_74 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + @@ -6275,7 +11629,7 @@ index 0000000..71e8881 + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + -+ gpio = <&gpio_ext_20 15 0>; ++ gpio = <&gpio_ext_74 15 0>; + + /* delay - CHECK */ + startup-delay-us = <70000>; @@ -6288,55 +11642,54 @@ index 0000000..71e8881 + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + -+ gpio = <&gpio_ext_20 0 0>; ++ gpio = <&gpio_ext_74 0 0>; + + startup-delay-us = <0>; + enable-active-high; + }; + -+ lvds_switch: regulator@8 { -+ compatible = "regulator-fixed"; -+ regulator-name = "lvds_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio1 24 0>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ + sdio_switch: regulator@9 { + compatible = "regulator-fixed"; + regulator-name = "wifi_on"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_20 5 0>; ++ gpio = <&gpio_ext_74 5 0>; + enable-active-low; + regulator-always-on; + }; + -+ sound_switch: regulator@10 { ++ radio_switch: regulator@11 { + compatible = "regulator-fixed"; -+ regulator-name = "pcm3168a_on"; ++ regulator-name = "radio_on"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_21 5 0>; -+ enable-active-low; ++ gpio = <&gpio_ext_74 13 GPIO_ACTIVE_HIGH>; ++ enable-active-high; + regulator-always-on; + }; + -+ radio_switch: regulator@11 { ++ mpcie_3v3: regulator@12 { + compatible = "regulator-fixed"; -+ regulator-name = "radio_on"; ++ regulator-name = "mPCIe 3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_20 13 GPIO_ACTIVE_HIGH>; ++ gpio = <&gpio_ext_77 14 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ }; ++ ++ mpcie_1v8: regulator@13 { ++ compatible = "regulator-fixed"; ++ regulator-name = "mPCIe 1v8"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ gpio = <&gpio_ext_77 15 GPIO_ACTIVE_HIGH>; ++ startup-delay-us = <200000>; + enable-active-high; -+ regulator-always-on; + }; + + kim { + compatible = "kim"; -+ nshutdown_gpio = <343>; /* pca9535@i2c2.0x20 pin 3 */ ++ nshutdown_gpio = <343>; /* gpio_ext_74 pin 3 */ + /* serial1 */ + dev_name = "/dev/ttySC1"; + flow_cntrl = <1>; @@ -6461,6 +11814,17 @@ index 0000000..71e8881 + }; + }; + ++ hdmi-out { ++ compatible = "hdmi-connector"; ++ type = "a"; ++ ++ port { ++ hdmi_con: endpoint { ++ remote-endpoint = <&adv7513_out>; ++ }; ++ }; ++ }; ++ + radio: si468x@0 { + compatible = "si,si468x-pcm"; + status = "okay"; @@ -6470,9 +11834,24 @@ index 0000000..71e8881 +}; + +&pfc { -+ hscif4_pins: hscif4 { -+ groups = "hscif4_data_a", "hscif4_ctrl"; -+ function = "hscif4"; ++ scif1_pins: scif1 { ++ groups = "scif1_data_b"; ++ function = "scif1"; ++ }; ++ ++ hscif0_pins: hscif0 { ++ groups = "hscif0_data", "hscif0_ctrl"; ++ function = "hscif0"; ++ }; ++ ++ hscif1_pins: hscif1 { ++ groups = "hscif1_data_a", "hscif1_ctrl_a"; ++ function = "hscif1"; ++ }; ++ ++ du_pins: du { ++ groups = "du_rgb888", "du_sync", "du_clk_out_0", "du_disp"; ++ function = "du"; + }; + + sdhi3_pins_3v3: sd3_3v3 { @@ -6488,12 +11867,12 @@ index 0000000..71e8881 + }; + + sound_0_pins: sound0 { -+ groups = "ssi78_ctrl", "ssi7_data", "ssi8_data"; ++ groups = "ssi34_ctrl", "ssi3_data", "ssi4_data"; + function = "ssi"; + }; + + sound_1_pins: sound1 { -+ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; ++ groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data_a"; + function = "ssi"; + }; + @@ -6502,6 +11881,11 @@ index 0000000..71e8881 + function = "ssi"; + }; + ++ sound_3_pins: sound3 { ++ groups = "ssi78_ctrl", "ssi7_data", "ssi8_data"; ++ function = "ssi"; ++ }; ++ + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; @@ -6528,77 +11912,60 @@ index 0000000..71e8881 + }; +}; + -+&gpio0 { -+ video_a_irq { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-A irq"; -+ }; -+ -+ video_b_irq { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-B irq"; -+ }; ++&du { ++ pinctrl-0 = <&du_pins>; ++ pinctrl-names = "default"; + -+ gpioext_2_20_irq { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "0x20@i2c2 irq"; ++ ports { ++ port@0 { ++ endpoint { ++ remote-endpoint = <&adv7513_in>; ++ }; ++ }; ++ port@3 { ++ endpoint { ++ remote-endpoint = <&lvds_enc_in>; ++ }; ++ }; + }; +}; + -+&gpio1 { -+ gpioext_2_21_irq { ++&gpio2 { ++ bl_pwm { + gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "0x21@i2c2 irq"; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "BL PWM 100%"; + }; ++}; + -+ wifi_irq { ++&gpio6 { ++ audio_sw { + gpio-hog; -+ gpios = <25 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "wifi irq"; ++ gpios = <21 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Onboard MCh Audio"; + }; +}; + -+&gpio5 { -+ touch_irq { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "touch irq"; -+ }; ++&scif1 { ++ pinctrl-0 = <&scif1_pins>; ++ pinctrl-names = "default"; + -+ /* From TI forum */ -+ /* BT_AUD_OUT should be pulled low when WL_EN is activated. */ -+ /* in case it isn't, wilink8 ends up in one of the test modes that introduces various issues */ -+ bt_strap { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "BT strap pin"; -+ }; ++ status = "okay"; +}; + -+&gpio7 { -+ gpioext_2_21_irq { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "0x21@i2c4 irq"; -+ }; ++&hscif0 { ++ pinctrl-0 = <&hscif0_pins>; ++ pinctrl-names = "default"; ++ uart-has-rtscts; ++ ++ status = "okay"; +}; + -+&hscif4 { -+ pinctrl-0 = <&hscif4_pins>; ++&hscif1 { ++ pinctrl-0 = <&hscif1_pins>; + pinctrl-names = "default"; -+ uart-has-rtscts; + + status = "okay"; +}; @@ -6606,32 +11973,82 @@ index 0000000..71e8881 +&i2c2 { + clock-frequency = <100000>; + -+ gpio_ext_20: pca9535@20 { -+ compatible = "nxp,pca9535"; -+ reg = <0x20>; ++ gpio_ext_74: pca9539@74 { ++ compatible = "nxp,pca9539"; ++ reg = <0x74>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; -+ interrupt-parent = <&gpio0>; -+ interrupts = <15 IRQ_TYPE_EDGE_FALLING>; ++ interrupt-parent = <&gpio6>; ++ interrupts = <8 IRQ_TYPE_EDGE_FALLING>; ++ ++ hub_pwen { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "HUB pwen"; ++ }; ++ hub_rst { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "HUB rst"; ++ }; ++ otg_offvbus { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "OTG off VBUSn"; ++ }; ++ otg_extlpn { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "OTG EXTLPn"; ++ }; ++ otg_stat1 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "OTG Stat1"; ++ }; ++ otg_stat2 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "OTG Stat2"; ++ }; + }; + -+ gpio_ext_21: pca9535@21 { -+ compatible = "nxp,pca9535"; -+ reg = <0x21>; ++ gpio_ext_75: pca9539@75 { ++ compatible = "nxp,pca9539"; ++ reg = <0x75>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; -+ interrupt-parent = <&gpio1>; -+ interrupts = <15 IRQ_TYPE_EDGE_FALLING>; ++ interrupt-parent = <&gpio6>; ++ interrupts = <4 IRQ_TYPE_EDGE_FALLING>; ++ ++ gps_rst { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "GPS rst"; ++ }; ++ fpdl_shdn { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "FPDLink shdn"; ++ }; + }; + + i2cswitch2: pca9548@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; -+ reg = <0x74>; -+ reset-gpios = <&gpio6 5 GPIO_ACTIVE_LOW>; ++ reg = <0x71>; ++ reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + + i2c@0 { + #address-cells = <1>; @@ -6665,7 +12082,40 @@ index 0000000..71e8881 + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; -+ /* A2B node(s) */ ++ ++ hdmi@3d { ++ compatible = "adi,adv7511w"; ++ reg = <0x3d>; ++ interrupt-parent = <&gpio2>; ++ interrupts = <0 IRQ_TYPE_EDGE_BOTH>; ++ pd-gpios = <&gpio_ext_75 5 GPIO_ACTIVE_LOW>; ++ ++ adi,input-depth = <8>; ++ adi,input-colorspace = "rgb"; ++ adi,input-clock = "1x"; ++ adi,input-style = <1>; ++ adi,input-justification = "evenly"; ++ adi,clock-delay = <1200>; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ adv7513_in: endpoint { ++ remote-endpoint = <&du_out_rgb>; ++ }; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ adv7513_out: endpoint { ++ remote-endpoint = <&hdmi_con>; ++ }; ++ }; ++ }; ++ }; + }; + + i2c@5 { @@ -6711,7 +12161,7 @@ index 0000000..71e8881 + }; + + lsm9ds0_acc_mag@1d { -+ compatible = "st,lsm9ds0_acc_magn"; ++ compatible = "st,lsm9ds0_accel_magn"; + reg = <0x1d>; + }; + @@ -6726,15 +12176,39 @@ index 0000000..71e8881 +}; + +&i2c4 { -+ gpio_ext_22: pca9535@21 { -+ compatible = "nxp,pca9535"; -+ reg = <0x22>; ++ gpio_ext_76: pca9539@76 { ++ compatible = "nxp,pca9539"; ++ reg = <0x76>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio7>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + ++ port_b_a0 { ++ gpio-hog; ++ gpios = <0 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B A0"; ++ }; ++ port_b_a1 { ++ gpio-hog; ++ gpios = <1 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B A1"; ++ }; ++ port_a_a0 { ++ gpio-hog; ++ gpios = <2 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A A0"; ++ }; ++ port_a_a1 { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A A1"; ++ }; + cmos_pwdn { + gpio-hog; + gpios = <8 GPIO_ACTIVE_HIGH>; @@ -6761,14 +12235,68 @@ index 0000000..71e8881 + output-high; + line-name = "RaspB_IO0"; + }; ++ sam_rst { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "SAM RST"; ++ }; ++ sam_pwr { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "SAM PWR"; ++ }; ++ /* 0 - FPDLink output, 1 - LVDS output */ ++ lvds_vs_fpdl { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "LVDS switch"; ++ }; ++ }; ++ ++ gpio_ext_77: pca9539@77 { ++ compatible = "nxp,pca9539"; ++ reg = <0x77>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio5>; ++ interrupts = <9 IRQ_TYPE_EDGE_FALLING>; ++ ++ mpcie_wake { ++ gpio-hog; ++ gpios = <0 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "mPCIe WAKE#"; ++ }; ++ mpcie_wdisable { ++ gpio-hog; ++ gpios = <1 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "mPCIe W_DISABLE"; ++ }; ++ mpcie_clreq { ++ gpio-hog; ++ gpios = <2 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "mPCIe CLKREQ#"; ++ }; ++ mpcie_ovc { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "mPCIe OVC"; ++ }; + }; + + i2cswitch4: pca9548@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; -+ reg = <0x74>; -+ reset-gpios= <&gpio6 21 GPIO_ACTIVE_LOW>; ++ reg = <0x71>; ++ reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>; + + i2c@0 { + #address-cells = <1>; @@ -7195,6 +12723,13 @@ index 0000000..71e8881 + }; + }; + ++ i2c@3 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <3>; ++ /* MOST node(s) */ ++ }; ++ + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; @@ -7813,15 +13348,16 @@ index 0000000..71e8881 +}; + +&rcar_sound { -+ pinctrl-0 = <&sound_clk_pins>; ++ pinctrl-0 = <&sound_clk_pins &sound_3_pins>; ++ pinctrl-names = "default"; + + /* Multi DAI */ + #sound-dai-cells = <1>; + + rcar_sound,dai { + dai0 { -+ playback = <&ssi7>; -+ capture = <&ssi8>; ++ playback = <&ssi3>; ++ capture = <&ssi4>; + }; + + dai1 { @@ -7832,6 +13368,11 @@ index 0000000..71e8881 + dai2 { + capture = <&ssi6>; + }; ++ ++ dai3 { ++ playback = <&ssi7>; ++ capture = <&ssi8>; ++ }; + }; +}; + @@ -7857,7 +13398,7 @@ index 0000000..71e8881 + compatible = "ti,wl1837"; + reg = <2>; + interrupt-parent = <&gpio1>; -+ interrupts = <25 IRQ_TYPE_EDGE_RISING>; ++ interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + }; +}; + @@ -7914,19 +13455,24 @@ index 0000000..71e8881 + }; +}; + -+&ssi8 { ++&ssi4 { + shared-pin; +}; + -+/* uncomment to enable CN48 on VIN4 */ -+//#include "ulcb-kf-rpi.dtsi" ++&pciec1 { ++ pcie3v3-supply = <&mpcie_3v3>; ++ pcie1v8-supply = <&mpcie_1v8>; ++}; ++ +/* uncomment to enable CN47: SD on SDHI3 */ +//#include "ulcb-kf-sd3.dtsi" -+/* uncomment to override CN29 (CMOS camera) on VIN5 */ ++/* CN48 (Raspberry Pi) on VIN4 */ ++//#include "ulcb-kf-rpi.dtsi" ++/* CN29: (CMOS camera) on VIN5 */ +//#include "ulcb-kf-cmos.dtsi" diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts new file mode 100644 -index 0000000..480f7d9 +index 0000000..98b6a08 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-vb.dts @@ -0,0 +1,1787 @@ @@ -10827,487 +16373,12 @@ index 0000000..fb12a39f3 + pinctrl-names = "default"; + status = "okay"; +}; -diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts -new file mode 100644 -index 0000000..9264680 ---- /dev/null -+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf-v1.dts -@@ -0,0 +1,469 @@ -+/* -+ * Device Tree Source for the M3ULCB Kingfisher V1 board -+ * -+ * Copyright (C) 2017 Renesas Electronics Corp. -+ * Copyright (C) 2017 Cogent Embedded, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public License -+ * version 2. This program is licensed "as is" without any warranty of any -+ * kind, whether express or implied. -+ */ -+ -+#include "r8a7796-m3ulcb-kf.dts" -+ -+/ { -+ model = "Renesas M3ULCB Kingfisher V1 board based on r8a7796"; -+ -+ aliases { -+ serial1 = &hscif0; -+ serial2 = &hscif1; -+ serial3 = &scif1; -+ }; -+ -+ wlan_en: regulator@4 { -+ compatible = "regulator-fixed"; -+ regulator-name = "wlan-en-regulator"; -+ -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ gpio = <&gpio_ext_74 4 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ }; -+ -+ codec_en_reg: regulator@6 { -+ compatible = "regulator-fixed"; -+ regulator-name = "codec-en-regulator"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ gpio = <&gpio_ext_74 15 0>; -+ -+ /* delay - CHECK */ -+ startup-delay-us = <70000>; -+ enable-active-high; -+ }; -+ -+ amp_en_reg: regulator@7 { -+ compatible = "regulator-fixed"; -+ regulator-name = "amp-en-regulator"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ -+ gpio = <&gpio_ext_74 0 0>; -+ -+ startup-delay-us = <0>; -+ enable-active-high; -+ }; -+ -+ /delete-node/regulator@8; -+ -+ sdio_switch: regulator@9 { -+ compatible = "regulator-fixed"; -+ regulator-name = "wifi_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_74 5 0>; -+ enable-active-low; -+ regulator-always-on; -+ }; -+ -+ /delete-node/regulator@10; -+ -+ radio_switch: regulator@11 { -+ compatible = "regulator-fixed"; -+ regulator-name = "radio_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_74 13 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ -+ mpcie_3v3: regulator@12 { -+ compatible = "regulator-fixed"; -+ regulator-name = "mPCIe 3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_77 14 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ }; -+ -+ mpcie_1v8: regulator@13 { -+ compatible = "regulator-fixed"; -+ regulator-name = "mPCIe 1v8"; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <1800000>; -+ gpio = <&gpio_ext_77 15 GPIO_ACTIVE_HIGH>; -+ startup-delay-us = <200000>; -+ enable-active-high; -+ }; -+ -+ kim { -+ nshutdown_gpio = <343>; /* gpio_ext_74 pin 3 */ -+ }; -+ -+ hdmi-out { -+ compatible = "hdmi-connector"; -+ type = "a"; -+ -+ port { -+ hdmi_con: endpoint { -+ remote-endpoint = <&adv7513_out>; -+ }; -+ }; -+ }; -+}; -+ -+&pfc { -+ /delete-node/hscif4; -+ -+ scif1_pins: scif1 { -+ groups = "scif1_data_b"; -+ function = "scif1"; -+ }; -+ -+ hscif0_pins: hscif0 { -+ groups = "hscif0_data", "hscif0_ctrl"; -+ function = "hscif0"; -+ }; -+ -+ hscif1_pins: hscif1 { -+ groups = "hscif1_data_a", "hscif1_ctrl_a"; -+ function = "hscif1"; -+ }; -+ -+ du_pins: du { -+ groups = "du_rgb888", "du_sync", "du_clk_out_0", "du_disp"; -+ function = "du"; -+ }; -+}; -+ -+&du { -+ pinctrl-0 = <&du_pins>; -+ pinctrl-names = "default"; -+ -+ ports { -+ port@0 { -+ endpoint { -+ remote-endpoint = <&adv7513_in>; -+ }; -+ }; -+ port@1 { -+ endpoint { -+ remote-endpoint = <&rcar_dw_hdmi0_in>; -+ }; -+ }; -+ }; -+}; -+ -+&gpio0 { -+ /delete-node/video_a_irq; -+ /delete-node/video_b_irq; -+ /delete-node/gpioext_2_20_irq; -+}; -+ -+&gpio1 { -+ /delete-node/gpioext_2_21_irq; -+ /delete-node/wifi_irq; -+}; -+ -+&gpio2 { -+ bl_pwm { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "BL PWM 100%"; -+ }; -+}; -+ -+&gpio5 { -+ /delete-node/touch_irq; -+ /delete-node/bt_strap; -+}; -+ -+&gpio7 { -+ /delete-node/gpioext_2_21_irq; -+}; -+ -+&scif1 { -+ pinctrl-0 = <&scif1_pins>; -+ pinctrl-names = "default"; -+ -+ status = "okay"; -+}; -+ -+&hscif0 { -+ pinctrl-0 = <&hscif0_pins>; -+ pinctrl-names = "default"; -+ uart-has-rtscts; -+ -+ status = "okay"; -+}; -+ -+&hscif1 { -+ pinctrl-0 = <&hscif1_pins>; -+ pinctrl-names = "default"; -+ -+ status = "okay"; -+}; -+ -+&hscif4 { -+ /delete-property/pinctrl-0; -+ /delete-property/pinctrl-names; -+ -+ status = "disabled"; -+}; -+ -+&i2c2 { -+ /delete-node/pca9535@20; -+ /delete-node/pca9535@21; -+ -+ gpio_ext_74: pca9539@74 { -+ compatible = "nxp,pca9539"; -+ reg = <0x74>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio6>; -+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>; -+ -+ hub_pwen { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "HUB pwen"; -+ }; -+ hub_rst { -+ gpio-hog; -+ gpios = <7 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "HUB rst"; -+ }; -+ otg_offvbus { -+ gpio-hog; -+ gpios = <8 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "OTG off VBUSn"; -+ }; -+ otg_extlpn { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "OTG EXTLPn"; -+ }; -+ otg_stat1 { -+ gpio-hog; -+ gpios = <10 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "OTG Stat1"; -+ }; -+ otg_stat2 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "OTG Stat2"; -+ }; -+ }; -+ -+ gpio_ext_75: pca9539@75 { -+ compatible = "nxp,pca9539"; -+ reg = <0x75>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio6>; -+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>; -+ -+ gps_rst { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "GPS rst"; -+ }; -+ fpdl_shdn { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "FPDLink shdn"; -+ }; -+ }; -+}; -+ -+&i2cswitch2 { -+ reg = <0x71>; -+ reset-gpios= <&gpio5 3 GPIO_ACTIVE_LOW>; -+ -+ i2c@4 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <4>; -+ -+ hdmi@3d { -+ compatible = "adi,adv7511w"; -+ reg = <0x3d>; -+ interrupt-parent = <&gpio2>; -+ interrupts = <0 IRQ_TYPE_EDGE_BOTH>; -+ pd-gpios = <&gpio_ext_75 5 GPIO_ACTIVE_LOW>; -+ -+ adi,input-depth = <8>; -+ adi,input-colorspace = "rgb"; -+ adi,input-clock = "1x"; -+ adi,input-style = <1>; -+ adi,input-justification = "evenly"; -+ adi,clock-delay = <1200>; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ reg = <0>; -+ adv7513_in: endpoint { -+ remote-endpoint = <&du_out_rgb>; -+ }; -+ }; -+ -+ port@1 { -+ reg = <1>; -+ adv7513_out: endpoint { -+ remote-endpoint = <&hdmi_con>; -+ }; -+ }; -+ }; -+ }; -+ }; -+}; -+ -+&i2c4 { -+ /delete-node/pca9535@21; -+ -+ gpio_ext_76: pca9539@76 { -+ compatible = "nxp,pca9539"; -+ reg = <0x76>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio7>; -+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>; -+ -+ port_b_a0 { -+ gpio-hog; -+ gpios = <0 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-B A0"; -+ }; -+ port_b_a1 { -+ gpio-hog; -+ gpios = <1 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-B A1"; -+ }; -+ port_a_a0 { -+ gpio-hog; -+ gpios = <2 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "Video-A A0"; -+ }; -+ port_a_a1 { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "Video-A A1"; -+ }; -+ cmos_pwdn { -+ gpio-hog; -+ gpios = <8 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "CMOS PWDN"; -+ }; -+ cmos_rst { -+ gpio-hog; -+ gpios = <9 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "CMOS RST"; -+ }; -+ /* pin 12 - CAM_CLK */ -+ rpi_cam_io_1 { -+ gpio-hog; -+ gpios = <10 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "RaspB_IO1"; -+ }; -+ /* pin 11 - CAM_GPIO - assume pwdn */ -+ rpi_cam_io_0 { -+ gpio-hog; -+ gpios = <11 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "RaspB_IO0"; -+ }; -+ sam_rst { -+ gpio-hog; -+ gpios = <4 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "SAM RST"; -+ }; -+ sam_pwr { -+ gpio-hog; -+ gpios = <5 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "SAM PWR"; -+ }; -+ /* 0 - FPDLink output, 1 - LVDS output */ -+ lvds_vs_fpdl { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "LVDS switch"; -+ }; -+ }; -+ -+ gpio_ext_77: pca9539@77 { -+ compatible = "nxp,pca9539"; -+ reg = <0x77>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ interrupt-controller; -+ interrupt-parent = <&gpio5>; -+ interrupts = <9 IRQ_TYPE_EDGE_FALLING>; -+ -+ mpcie_wake { -+ gpio-hog; -+ gpios = <0 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "mPCIe WAKE#"; -+ }; -+ mpcie_wdisable { -+ gpio-hog; -+ gpios = <1 GPIO_ACTIVE_HIGH>; -+ output-high; -+ line-name = "mPCIe W_DISABLE"; -+ }; -+ mpcie_clreq { -+ gpio-hog; -+ gpios = <2 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "mPCIe CLKREQ#"; -+ }; -+ mpcie_ovc { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "mPCIe OVC"; -+ }; -+ }; -+}; -+ -+&i2cswitch4 { -+ reg = <0x71>; -+ reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>; -+}; -+ -+&wlcore { -+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>; -+}; -+ -+&pciec1 { -+ pcie3v3-supply = <&mpcie_3v3>; -+ pcie1v8-supply = <&mpcie_1v8>; -+}; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts new file mode 100644 -index 0000000..5a6c38b +index 0000000..a037f16 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts -@@ -0,0 +1,1284 @@ +@@ -0,0 +1,1400 @@ +/* + * Device Tree Source for the M3ULCB Kingfisher board on r8a7796 + * @@ -11325,7 +16396,9 @@ index 0000000..5a6c38b + model = "Renesas M3ULCB Kingfisher board based on r8a7796"; + + aliases { -+ serial1 = &hscif4; ++ serial1 = &hscif0; ++ serial2 = &hscif1; ++ serial3 = &scif1; + }; + + snd_clk: snd_clk { @@ -11342,7 +16415,7 @@ index 0000000..5a6c38b + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + -+ gpio = <&gpio_ext_20 4 GPIO_ACTIVE_HIGH>; ++ gpio = <&gpio_ext_74 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + @@ -11371,7 +16444,7 @@ index 0000000..5a6c38b + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + -+ gpio = <&gpio_ext_20 15 0>; ++ gpio = <&gpio_ext_74 15 0>; + + /* delay - CHECK */ + startup-delay-us = <70000>; @@ -11384,55 +16457,54 @@ index 0000000..5a6c38b + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + -+ gpio = <&gpio_ext_20 0 0>; ++ gpio = <&gpio_ext_74 0 0>; + + startup-delay-us = <0>; + enable-active-high; + }; + -+ lvds_switch: regulator@8 { -+ compatible = "regulator-fixed"; -+ regulator-name = "lvds_on"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&gpio1 24 0>; -+ enable-active-high; -+ regulator-always-on; -+ }; -+ + sdio_switch: regulator@9 { + compatible = "regulator-fixed"; + regulator-name = "wifi_on"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_20 5 0>; ++ gpio = <&gpio_ext_74 5 0>; + enable-active-low; + regulator-always-on; + }; + -+ sound_switch: regulator@10 { ++ radio_switch: regulator@11 { + compatible = "regulator-fixed"; -+ regulator-name = "pcm3168a_on"; ++ regulator-name = "radio_on"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_21 5 0>; -+ enable-active-low; ++ gpio = <&gpio_ext_74 13 GPIO_ACTIVE_HIGH>; ++ enable-active-high; + regulator-always-on; + }; + -+ radio_switch: regulator@11 { ++ mpcie_3v3: regulator@12 { + compatible = "regulator-fixed"; -+ regulator-name = "radio_on"; ++ regulator-name = "mPCIe 3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; -+ gpio = <&gpio_ext_20 13 GPIO_ACTIVE_HIGH>; ++ gpio = <&gpio_ext_77 14 GPIO_ACTIVE_HIGH>; ++ enable-active-high; ++ }; ++ ++ mpcie_1v8: regulator@13 { ++ compatible = "regulator-fixed"; ++ regulator-name = "mPCIe 1v8"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ gpio = <&gpio_ext_77 15 GPIO_ACTIVE_HIGH>; ++ startup-delay-us = <200000>; + enable-active-high; -+ regulator-always-on; + }; + + kim { + compatible = "kim"; -+ nshutdown_gpio = <343>; /* pca9535@i2c2.0x20 pin 3 */ ++ nshutdown_gpio = <343>; /* gpio_ext_74 pin 3 */ + /* serial1 */ + dev_name = "/dev/ttySC1"; + flow_cntrl = <1>; @@ -11557,6 +16629,17 @@ index 0000000..5a6c38b + }; + }; + ++ hdmi-out { ++ compatible = "hdmi-connector"; ++ type = "a"; ++ ++ port { ++ hdmi_con: endpoint { ++ remote-endpoint = <&adv7513_out>; ++ }; ++ }; ++ }; ++ + radio: si468x@0 { + compatible = "si,si468x-pcm"; + status = "okay"; @@ -11566,9 +16649,24 @@ index 0000000..5a6c38b +}; + +&pfc { -+ hscif4_pins: hscif4 { -+ groups = "hscif4_data_a", "hscif4_ctrl"; -+ function = "hscif4"; ++ scif1_pins: scif1 { ++ groups = "scif1_data_b"; ++ function = "scif1"; ++ }; ++ ++ hscif0_pins: hscif0 { ++ groups = "hscif0_data", "hscif0_ctrl"; ++ function = "hscif0"; ++ }; ++ ++ hscif1_pins: hscif1 { ++ groups = "hscif1_data_a", "hscif1_ctrl_a"; ++ function = "hscif1"; ++ }; ++ ++ du_pins: du { ++ groups = "du_rgb888", "du_sync", "du_clk_out_0", "du_disp"; ++ function = "du"; + }; + + sdhi3_pins_3v3: sd3_3v3 { @@ -11584,12 +16682,12 @@ index 0000000..5a6c38b + }; + + sound_0_pins: sound0 { -+ groups = "ssi78_ctrl", "ssi7_data", "ssi8_data"; ++ groups = "ssi34_ctrl", "ssi3_data", "ssi4_data"; + function = "ssi"; + }; + + sound_1_pins: sound1 { -+ groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a"; ++ groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data_a"; + function = "ssi"; + }; + @@ -11598,6 +16696,11 @@ index 0000000..5a6c38b + function = "ssi"; + }; + ++ sound_3_pins: sound3 { ++ groups = "ssi78_ctrl", "ssi7_data", "ssi8_data"; ++ function = "ssi"; ++ }; ++ + usb0_pins: usb0 { + groups = "usb0"; + function = "usb0"; @@ -11624,77 +16727,60 @@ index 0000000..5a6c38b + }; +}; + -+&gpio0 { -+ video_a_irq { -+ gpio-hog; -+ gpios = <13 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-A irq"; -+ }; -+ -+ video_b_irq { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "Video-B irq"; -+ }; ++&du { ++ pinctrl-0 = <&du_pins>; ++ pinctrl-names = "default"; + -+ gpioext_2_20_irq { -+ gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "0x20@i2c2 irq"; ++ ports { ++ port@0 { ++ endpoint { ++ remote-endpoint = <&adv7513_in>; ++ }; ++ }; ++ port@2 { ++ endpoint { ++ remote-endpoint = <&lvds_enc_in>; ++ }; ++ }; + }; +}; + -+&gpio1 { -+ gpioext_2_21_irq { ++&gpio2 { ++ bl_pwm { + gpio-hog; -+ gpios = <15 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "0x21@i2c2 irq"; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "BL PWM 100%"; + }; ++}; + -+ wifi_irq { ++&gpio6 { ++ audio_sw { + gpio-hog; -+ gpios = <25 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "wifi irq"; ++ gpios = <21 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Onboard MCh Audio"; + }; +}; + -+&gpio5 { -+ touch_irq { -+ gpio-hog; -+ gpios = <6 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "touch irq"; -+ }; ++&scif1 { ++ pinctrl-0 = <&scif1_pins>; ++ pinctrl-names = "default"; + -+ /* From TI forum */ -+ /* BT_AUD_OUT should be pulled low when WL_EN is activated. */ -+ /* in case it isn't, wilink8 ends up in one of the test modes that introduces various issues */ -+ bt_strap { -+ gpio-hog; -+ gpios = <14 GPIO_ACTIVE_HIGH>; -+ output-low; -+ line-name = "BT strap pin"; -+ }; ++ status = "okay"; +}; + -+&gpio7 { -+ gpioext_2_21_irq { -+ gpio-hog; -+ gpios = <3 GPIO_ACTIVE_HIGH>; -+ input; -+ line-name = "0x21@i2c4 irq"; -+ }; ++&hscif0 { ++ pinctrl-0 = <&hscif0_pins>; ++ pinctrl-names = "default"; ++ uart-has-rtscts; ++ ++ status = "okay"; +}; + -+&hscif4 { -+ pinctrl-0 = <&hscif4_pins>; ++&hscif1 { ++ pinctrl-0 = <&hscif1_pins>; + pinctrl-names = "default"; -+ uart-has-rtscts; + + status = "okay"; +}; @@ -11702,32 +16788,82 @@ index 0000000..5a6c38b +&i2c2 { + clock-frequency = <100000>; + -+ gpio_ext_20: pca9535@20 { -+ compatible = "nxp,pca9535"; -+ reg = <0x20>; ++ gpio_ext_74: pca9539@74 { ++ compatible = "nxp,pca9539"; ++ reg = <0x74>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; -+ interrupt-parent = <&gpio0>; -+ interrupts = <15 IRQ_TYPE_EDGE_FALLING>; ++ interrupt-parent = <&gpio6>; ++ interrupts = <8 IRQ_TYPE_EDGE_FALLING>; ++ ++ hub_pwen { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "HUB pwen"; ++ }; ++ hub_rst { ++ gpio-hog; ++ gpios = <7 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "HUB rst"; ++ }; ++ otg_offvbus { ++ gpio-hog; ++ gpios = <8 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "OTG off VBUSn"; ++ }; ++ otg_extlpn { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "OTG EXTLPn"; ++ }; ++ otg_stat1 { ++ gpio-hog; ++ gpios = <10 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "OTG Stat1"; ++ }; ++ otg_stat2 { ++ gpio-hog; ++ gpios = <11 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "OTG Stat2"; ++ }; + }; + -+ gpio_ext_21: pca9535@21 { -+ compatible = "nxp,pca9535"; -+ reg = <0x21>; ++ gpio_ext_75: pca9539@75 { ++ compatible = "nxp,pca9539"; ++ reg = <0x75>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; -+ interrupt-parent = <&gpio1>; -+ interrupts = <15 IRQ_TYPE_EDGE_FALLING>; ++ interrupt-parent = <&gpio6>; ++ interrupts = <4 IRQ_TYPE_EDGE_FALLING>; ++ ++ gps_rst { ++ gpio-hog; ++ gpios = <6 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "GPS rst"; ++ }; ++ fpdl_shdn { ++ gpio-hog; ++ gpios = <9 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "FPDLink shdn"; ++ }; + }; + + i2cswitch2: pca9548@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; -+ reg = <0x74>; -+ reset-gpios = <&gpio6 5 GPIO_ACTIVE_LOW>; ++ reg = <0x71>; ++ reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; + + i2c@0 { + #address-cells = <1>; @@ -11761,7 +16897,40 @@ index 0000000..5a6c38b + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; -+ /* A2B node(s) */ ++ ++ hdmi@3d { ++ compatible = "adi,adv7511w"; ++ reg = <0x3d>; ++ interrupt-parent = <&gpio2>; ++ interrupts = <0 IRQ_TYPE_EDGE_BOTH>; ++ pd-gpios = <&gpio_ext_75 5 GPIO_ACTIVE_LOW>; ++ ++ adi,input-depth = <8>; ++ adi,input-colorspace = "rgb"; ++ adi,input-clock = "1x"; ++ adi,input-style = <1>; ++ adi,input-justification = "evenly"; ++ adi,clock-delay = <1200>; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ adv7513_in: endpoint { ++ remote-endpoint = <&du_out_rgb>; ++ }; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ adv7513_out: endpoint { ++ remote-endpoint = <&hdmi_con>; ++ }; ++ }; ++ }; ++ }; + }; + + i2c@5 { @@ -11807,7 +16976,7 @@ index 0000000..5a6c38b + }; + + lsm9ds0_acc_mag@1d { -+ compatible = "st,lsm9ds0_acc_magn"; ++ compatible = "st,lsm9ds0_accel_magn"; + reg = <0x1d>; + }; + @@ -11822,15 +16991,39 @@ index 0000000..5a6c38b +}; + +&i2c4 { -+ gpio_ext_22: pca9535@21 { -+ compatible = "nxp,pca9535"; -+ reg = <0x22>; ++ gpio_ext_76: pca9539@76 { ++ compatible = "nxp,pca9539"; ++ reg = <0x76>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio7>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + ++ port_b_a0 { ++ gpio-hog; ++ gpios = <0 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-B A0"; ++ }; ++ port_b_a1 { ++ gpio-hog; ++ gpios = <1 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-B A1"; ++ }; ++ port_a_a0 { ++ gpio-hog; ++ gpios = <2 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "Video-A A0"; ++ }; ++ port_a_a1 { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "Video-A A1"; ++ }; + cmos_pwdn { + gpio-hog; + gpios = <8 GPIO_ACTIVE_HIGH>; @@ -11857,14 +17050,68 @@ index 0000000..5a6c38b + output-high; + line-name = "RaspB_IO0"; + }; ++ sam_rst { ++ gpio-hog; ++ gpios = <4 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "SAM RST"; ++ }; ++ sam_pwr { ++ gpio-hog; ++ gpios = <5 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "SAM PWR"; ++ }; ++ /* 0 - FPDLink output, 1 - LVDS output */ ++ lvds_vs_fpdl { ++ gpio-hog; ++ gpios = <14 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "LVDS switch"; ++ }; ++ }; ++ ++ gpio_ext_77: pca9539@77 { ++ compatible = "nxp,pca9539"; ++ reg = <0x77>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ interrupt-parent = <&gpio5>; ++ interrupts = <9 IRQ_TYPE_EDGE_FALLING>; ++ ++ mpcie_wake { ++ gpio-hog; ++ gpios = <0 GPIO_ACTIVE_HIGH>; ++ output-low; ++ line-name = "mPCIe WAKE#"; ++ }; ++ mpcie_wdisable { ++ gpio-hog; ++ gpios = <1 GPIO_ACTIVE_HIGH>; ++ output-high; ++ line-name = "mPCIe W_DISABLE"; ++ }; ++ mpcie_clreq { ++ gpio-hog; ++ gpios = <2 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "mPCIe CLKREQ#"; ++ }; ++ mpcie_ovc { ++ gpio-hog; ++ gpios = <3 GPIO_ACTIVE_HIGH>; ++ input; ++ line-name = "mPCIe OVC"; ++ }; + }; + + i2cswitch4: pca9548@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; -+ reg = <0x74>; -+ reset-gpios= <&gpio6 21 GPIO_ACTIVE_LOW>; ++ reg = <0x71>; ++ reset-gpios= <&gpio3 15 GPIO_ACTIVE_LOW>; + + i2c@0 { + #address-cells = <1>; @@ -12089,32 +17336,6 @@ index 0000000..5a6c38b + /* MOST node(s) */ + }; + -+ i2c@4 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <4>; -+ -+ rpi_camera: ov5647@36 { -+ compatible = "ovti,ov5647"; -+ reg = <0x36>; -+ -+ port@0 { -+ rpi_camera_in: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2>; -+ remote-endpoint = <&vin4ep0>; -+ }; -+ }; -+ }; -+ }; -+ -+ i2c@5 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <5>; -+ /* CMOS camera node(s) */ -+ }; -+ + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; @@ -12397,29 +17618,6 @@ index 0000000..5a6c38b + }; +}; + -+&vin4 { -+ status = "okay"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { -+ vin4ep0: endpoint { -+ csi,select = "csi20"; -+ virtual,channel = <0>; -+ remote-endpoint = <&rpi_camera_in>; -+ data-lanes = <1 2>; -+ }; -+ }; -+ port@1 { -+ csi2ep0: endpoint { -+ remote-endpoint = <&csi2_20_ep>; -+ }; -+ }; -+ }; -+}; -+ +&csi2_40 { + status = "okay"; + @@ -12454,38 +17652,17 @@ index 0000000..5a6c38b + }; +}; + -+&csi2_20 { -+ status = "okay"; -+ -+ virtual,channel { -+ csi2_vc0 { -+ data,type = "raw8"; -+ receive,vc = <0>; -+ }; -+ }; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi2_20_ep: endpoint { -+ clock-lanes = <0>; -+ data-lanes = <1 2>; -+ csi-rate = <280>; -+ }; -+ }; -+}; -+ +&rcar_sound { -+ pinctrl-0 = <&sound_clk_pins>; ++ pinctrl-0 = <&sound_clk_pins &sound_3_pins>; ++ pinctrl-names = "default"; + + /* Multi DAI */ + #sound-dai-cells = <1>; + + rcar_sound,dai { + dai0 { -+ playback = <&ssi7>; -+ capture = <&ssi8>; ++ playback = <&ssi3>; ++ capture = <&ssi4>; + }; + + dai1 { @@ -12496,6 +17673,11 @@ index 0000000..5a6c38b + dai2 { + capture = <&ssi6>; + }; ++ ++ dai3 { ++ playback = <&ssi7>; ++ capture = <&ssi8>; ++ }; + }; +}; + @@ -12521,7 +17703,7 @@ index 0000000..5a6c38b + compatible = "ti,wl1837"; + reg = <2>; + interrupt-parent = <&gpio1>; -+ interrupts = <25 IRQ_TYPE_EDGE_RISING>; ++ interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + }; +}; + @@ -12582,10 +17764,15 @@ index 0000000..5a6c38b + }; +}; + -+&ssi8 { ++&ssi4 { + shared-pin; +}; + ++&pciec1 { ++ pcie3v3-supply = <&mpcie_3v3>; ++ pcie1v8-supply = <&mpcie_1v8>; ++}; ++ +/* uncomment to enable CN47: SD on SDHI3 */ +//#include "ulcb-kf-sd3.dtsi" +/* CN48 (Raspberry Pi) on VIN4 */ @@ -13292,10 +18479,10 @@ index 0000000..2145f5e +}; diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf-rpi.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf-rpi.dtsi new file mode 100644 -index 0000000..d3b4ece +index 0000000..bcd9865 --- /dev/null +++ b/arch/arm64/boot/dts/renesas/ulcb-kf-rpi.dtsi -@@ -0,0 +1,75 @@ +@@ -0,0 +1,77 @@ +/* + * Device Tree Source for the H3ULCB Kingfisher board: + * this adding conflicting resource on VIN4 for Raspberry Pi camera @@ -13330,6 +18517,8 @@ index 0000000..d3b4ece +}; + +&vin4 { ++ status = "okay"; ++ + ports { + #address-cells = <1>; + #size-cells = <0>; |