aboutsummaryrefslogtreecommitdiffstats
path: root/meta-rcar-gen3/docs/sample
diff options
context:
space:
mode:
Diffstat (limited to 'meta-rcar-gen3/docs/sample')
-rw-r--r--meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/bsp/local-wayland.conf35
-rw-r--r--meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/bsp/local.conf35
-rw-r--r--meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/gfx-only/local-wayland.conf40
-rw-r--r--meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/mmp/local-wayland.conf37
-rw-r--r--meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local-wayland.conf35
-rw-r--r--meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local.conf35
-rw-r--r--meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/gfx-only/local-wayland.conf40
-rw-r--r--meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/mmp/local-wayland.conf37
-rw-r--r--meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/bsp/local-wayland.conf35
-rw-r--r--meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/bsp/local.conf35
-rw-r--r--meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/gfx-only/local-wayland.conf40
-rw-r--r--meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/mmp/local-wayland.conf37
-rw-r--r--meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local-wayland.conf35
-rw-r--r--meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local.conf35
-rw-r--r--meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/gfx-only/local-wayland.conf40
-rw-r--r--meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/mmp/local-wayland.conf37
-rw-r--r--meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-ltp.conf37
-rw-r--r--meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-wayland.conf35
-rw-r--r--meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local.conf35
-rw-r--r--meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/gfx-only/local-wayland.conf40
-rw-r--r--meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/mmp/local-wayland.conf37
21 files changed, 536 insertions, 236 deletions
diff --git a/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/bsp/local-wayland.conf
index 7b0d9a4..303b9ad 100644
--- a/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/bsp/local-wayland.conf
+++ b/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/bsp/local-wayland.conf
@@ -28,13 +28,13 @@
# There are also the following hardware board target machines included for
# demonstration purposes:
#
-#MACHINE ?= "beaglebone"
+#MACHINE ?= "beaglebone-yocto"
#MACHINE ?= "genericx86"
#MACHINE ?= "genericx86-64"
#MACHINE ?= "mpc8315e-rdb"
#MACHINE ?= "edgerouter"
#
-# This sets the default machine to be qemux86 if no other machine is selected:
+# This sets the default machine to be qemux86-64 if no other machine is selected:
MACHINE ??= "ebisu"
#
@@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm"
# variable can contain the following options:
# "dbg-pkgs" - add -dbg packages for all installed packages
# (adds symbol information for debugging/profiling)
+# "src-pkgs" - add -src packages for all installed packages
+# (adds source code for debugging)
# "dev-pkgs" - add -dev packages for all installed packages
# (useful if you want to develop against libs in the image)
# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
@@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink"
# Runtime testing of images
#
# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
+# after any root filesystems are created and run tests against those images. It can also
+# run tests against any SDK that are built. To enable this uncomment these lines.
+# See classes/test{image,sdk}.bbclass for further details.
+#IMAGE_CLASSES += "testimage testsdk"
+#TESTIMAGE_AUTO_qemuall = "1"
+
#
# Interactive shell configuration
#
@@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\
#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
#file://.* file:///some/local/dir/sstate/PATH"
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
#
# Qemu configuration
#
# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
# be built, if you want to use your host's libSDL instead of the minimal libsdl built
-# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-system-native = " sdl"
PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-#ASSUME_PROVIDED += "libsdl-native"
+#ASSUME_PROVIDED += "libsdl2-native"
# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
# track the version of this file when it was generated. This can safely be ignored if
diff --git a/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/bsp/local.conf
index 16c51eb..e52f839 100644
--- a/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/bsp/local.conf
+++ b/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/bsp/local.conf
@@ -28,13 +28,13 @@
# There are also the following hardware board target machines included for
# demonstration purposes:
#
-#MACHINE ?= "beaglebone"
+#MACHINE ?= "beaglebone-yocto"
#MACHINE ?= "genericx86"
#MACHINE ?= "genericx86-64"
#MACHINE ?= "mpc8315e-rdb"
#MACHINE ?= "edgerouter"
#
-# This sets the default machine to be qemux86 if no other machine is selected:
+# This sets the default machine to be qemux86-64 if no other machine is selected:
MACHINE ??= "ebisu"
#
@@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm"
# variable can contain the following options:
# "dbg-pkgs" - add -dbg packages for all installed packages
# (adds symbol information for debugging/profiling)
+# "src-pkgs" - add -src packages for all installed packages
+# (adds source code for debugging)
# "dev-pkgs" - add -dev packages for all installed packages
# (useful if you want to develop against libs in the image)
# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
@@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink"
# Runtime testing of images
#
# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
+# after any root filesystems are created and run tests against those images. It can also
+# run tests against any SDK that are built. To enable this uncomment these lines.
+# See classes/test{image,sdk}.bbclass for further details.
+#IMAGE_CLASSES += "testimage testsdk"
+#TESTIMAGE_AUTO_qemuall = "1"
+
#
# Interactive shell configuration
#
@@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\
#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
#file://.* file:///some/local/dir/sstate/PATH"
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
#
# Qemu configuration
#
# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
# be built, if you want to use your host's libSDL instead of the minimal libsdl built
-# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-system-native = " sdl"
PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-#ASSUME_PROVIDED += "libsdl-native"
+#ASSUME_PROVIDED += "libsdl2-native"
# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
# track the version of this file when it was generated. This can safely be ignored if
diff --git a/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/gfx-only/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/gfx-only/local-wayland.conf
index 5aa6c2f..dc96eb3 100644
--- a/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/gfx-only/local-wayland.conf
+++ b/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/gfx-only/local-wayland.conf
@@ -28,13 +28,13 @@
# There are also the following hardware board target machines included for
# demonstration purposes:
#
-#MACHINE ?= "beaglebone"
+#MACHINE ?= "beaglebone-yocto"
#MACHINE ?= "genericx86"
#MACHINE ?= "genericx86-64"
#MACHINE ?= "mpc8315e-rdb"
#MACHINE ?= "edgerouter"
#
-# This sets the default machine to be qemux86 if no other machine is selected:
+# This sets the default machine to be qemux86-64 if no other machine is selected:
MACHINE ??= "ebisu"
#
@@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm"
# variable can contain the following options:
# "dbg-pkgs" - add -dbg packages for all installed packages
# (adds symbol information for debugging/profiling)
+# "src-pkgs" - add -src packages for all installed packages
+# (adds source code for debugging)
# "dev-pkgs" - add -dev packages for all installed packages
# (useful if you want to develop against libs in the image)
# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
@@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink"
# Runtime testing of images
#
# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
+# after any root filesystems are created and run tests against those images. It can also
+# run tests against any SDK that are built. To enable this uncomment these lines.
+# See classes/test{image,sdk}.bbclass for further details.
+#IMAGE_CLASSES += "testimage testsdk"
+#TESTIMAGE_AUTO_qemuall = "1"
+
#
# Interactive shell configuration
#
@@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\
#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
#file://.* file:///some/local/dir/sstate/PATH"
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
#
# Qemu configuration
#
# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
# be built, if you want to use your host's libSDL instead of the minimal libsdl built
-# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-system-native = " sdl"
PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-#ASSUME_PROVIDED += "libsdl-native"
+#ASSUME_PROVIDED += "libsdl2-native"
# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
# track the version of this file when it was generated. This can safely be ignored if
@@ -257,7 +272,7 @@ PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
PREFERRED_PROVIDER_virtual/egl = "libegl"
PREFERRED_PROVIDER_virtual/libgl = ""
PREFERRED_PROVIDER_virtual/mesa = ""
-PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_virtual/libgbm = "libgbm"
PREFERRED_PROVIDER_libgbm-dev = "libgbm"
BBMASK .= "|mesa-gl"
# Mask MMP recipes
@@ -266,9 +281,6 @@ BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
# Add for gstreamer plugins ugly
LICENSE_FLAGS_WHITELIST = "commercial"
-# Fix the Warning of gstreamer plugins
-RDEPENDS_gstreamer1.0-plugins-bad = "libwayland-egl"
-
# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
# Linux ICCOM library (RCG3ZLILL4101ZNO)
#DISTRO_FEATURES_append = " iccom"
diff --git a/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/mmp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/mmp/local-wayland.conf
index c9cd219..dae6455 100644
--- a/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/mmp/local-wayland.conf
+++ b/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/mmp/local-wayland.conf
@@ -28,13 +28,13 @@
# There are also the following hardware board target machines included for
# demonstration purposes:
#
-#MACHINE ?= "beaglebone"
+#MACHINE ?= "beaglebone-yocto"
#MACHINE ?= "genericx86"
#MACHINE ?= "genericx86-64"
#MACHINE ?= "mpc8315e-rdb"
#MACHINE ?= "edgerouter"
#
-# This sets the default machine to be qemux86 if no other machine is selected:
+# This sets the default machine to be qemux86-64 if no other machine is selected:
MACHINE ??= "ebisu"
#
@@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm"
# variable can contain the following options:
# "dbg-pkgs" - add -dbg packages for all installed packages
# (adds symbol information for debugging/profiling)
+# "src-pkgs" - add -src packages for all installed packages
+# (adds source code for debugging)
# "dev-pkgs" - add -dev packages for all installed packages
# (useful if you want to develop against libs in the image)
# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
@@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink"
# Runtime testing of images
#
# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
+# after any root filesystems are created and run tests against those images. It can also
+# run tests against any SDK that are built. To enable this uncomment these lines.
+# See classes/test{image,sdk}.bbclass for further details.
+#IMAGE_CLASSES += "testimage testsdk"
+#TESTIMAGE_AUTO_qemuall = "1"
+
#
# Interactive shell configuration
#
@@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\
#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
#file://.* file:///some/local/dir/sstate/PATH"
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
#
# Qemu configuration
#
# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
# be built, if you want to use your host's libSDL instead of the minimal libsdl built
-# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-system-native = " sdl"
PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-#ASSUME_PROVIDED += "libsdl-native"
+#ASSUME_PROVIDED += "libsdl2-native"
# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
# track the version of this file when it was generated. This can safely be ignored if
@@ -257,7 +272,7 @@ PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
PREFERRED_PROVIDER_virtual/egl = "libegl"
PREFERRED_PROVIDER_virtual/libgl = ""
PREFERRED_PROVIDER_virtual/mesa = ""
-PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_virtual/libgbm = "libgbm"
PREFERRED_PROVIDER_libgbm-dev = "libgbm"
BBMASK .= "|mesa-gl"
diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local-wayland.conf
index fa3c528..73057cf 100644
--- a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local-wayland.conf
+++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local-wayland.conf
@@ -28,13 +28,13 @@
# There are also the following hardware board target machines included for
# demonstration purposes:
#
-#MACHINE ?= "beaglebone"
+#MACHINE ?= "beaglebone-yocto"
#MACHINE ?= "genericx86"
#MACHINE ?= "genericx86-64"
#MACHINE ?= "mpc8315e-rdb"
#MACHINE ?= "edgerouter"
#
-# This sets the default machine to be qemux86 if no other machine is selected:
+# This sets the default machine to be qemux86-64 if no other machine is selected:
MACHINE ??= "h3ulcb"
#
@@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm"
# variable can contain the following options:
# "dbg-pkgs" - add -dbg packages for all installed packages
# (adds symbol information for debugging/profiling)
+# "src-pkgs" - add -src packages for all installed packages
+# (adds source code for debugging)
# "dev-pkgs" - add -dev packages for all installed packages
# (useful if you want to develop against libs in the image)
# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
@@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink"
# Runtime testing of images
#
# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
+# after any root filesystems are created and run tests against those images. It can also
+# run tests against any SDK that are built. To enable this uncomment these lines.
+# See classes/test{image,sdk}.bbclass for further details.
+#IMAGE_CLASSES += "testimage testsdk"
+#TESTIMAGE_AUTO_qemuall = "1"
+
#
# Interactive shell configuration
#
@@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\
#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
#file://.* file:///some/local/dir/sstate/PATH"
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
#
# Qemu configuration
#
# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
# be built, if you want to use your host's libSDL instead of the minimal libsdl built
-# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-system-native = " sdl"
PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-#ASSUME_PROVIDED += "libsdl-native"
+#ASSUME_PROVIDED += "libsdl2-native"
# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
# track the version of this file when it was generated. This can safely be ignored if
diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local.conf
index 86ae5f2..463b0dc 100644
--- a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local.conf
+++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local.conf
@@ -28,13 +28,13 @@
# There are also the following hardware board target machines included for
# demonstration purposes:
#
-#MACHINE ?= "beaglebone"
+#MACHINE ?= "beaglebone-yocto"
#MACHINE ?= "genericx86"
#MACHINE ?= "genericx86-64"
#MACHINE ?= "mpc8315e-rdb"
#MACHINE ?= "edgerouter"
#
-# This sets the default machine to be qemux86 if no other machine is selected:
+# This sets the default machine to be qemux86-64 if no other machine is selected:
MACHINE ??= "h3ulcb"
#
@@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm"
# variable can contain the following options:
# "dbg-pkgs" - add -dbg packages for all installed packages
# (adds symbol information for debugging/profiling)
+# "src-pkgs" - add -src packages for all installed packages
+# (adds source code for debugging)
# "dev-pkgs" - add -dev packages for all installed packages
# (useful if you want to develop against libs in the image)
# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
@@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink"
# Runtime testing of images
#
# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
+# after any root filesystems are created and run tests against those images. It can also
+# run tests against any SDK that are built. To enable this uncomment these lines.
+# See classes/test{image,sdk}.bbclass for further details.
+#IMAGE_CLASSES += "testimage testsdk"
+#TESTIMAGE_AUTO_qemuall = "1"
+
#
# Interactive shell configuration
#
@@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\
#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
#file://.* file:///some/local/dir/sstate/PATH"
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
#
# Qemu configuration
#
# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
# be built, if you want to use your host's libSDL instead of the minimal libsdl built
-# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-system-native = " sdl"
PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-#ASSUME_PROVIDED += "libsdl-native"
+#ASSUME_PROVIDED += "libsdl2-native"
# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
# track the version of this file when it was generated. This can safely be ignored if
diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/gfx-only/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/gfx-only/local-wayland.conf
index 42aa134..2972826 100644
--- a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/gfx-only/local-wayland.conf
+++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/gfx-only/local-wayland.conf
@@ -28,13 +28,13 @@
# There are also the following hardware board target machines included for
# demonstration purposes:
#
-#MACHINE ?= "beaglebone"
+#MACHINE ?= "beaglebone-yocto"
#MACHINE ?= "genericx86"
#MACHINE ?= "genericx86-64"
#MACHINE ?= "mpc8315e-rdb"
#MACHINE ?= "edgerouter"
#
-# This sets the default machine to be qemux86 if no other machine is selected:
+# This sets the default machine to be qemux86-64 if no other machine is selected:
MACHINE ??= "h3ulcb"
#
@@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm"
# variable can contain the following options:
# "dbg-pkgs" - add -dbg packages for all installed packages
# (adds symbol information for debugging/profiling)
+# "src-pkgs" - add -src packages for all installed packages
+# (adds source code for debugging)
# "dev-pkgs" - add -dev packages for all installed packages
# (useful if you want to develop against libs in the image)
# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
@@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink"
# Runtime testing of images
#
# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
+# after any root filesystems are created and run tests against those images. It can also
+# run tests against any SDK that are built. To enable this uncomment these lines.
+# See classes/test{image,sdk}.bbclass for further details.
+#IMAGE_CLASSES += "testimage testsdk"
+#TESTIMAGE_AUTO_qemuall = "1"
+
#
# Interactive shell configuration
#
@@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\
#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
#file://.* file:///some/local/dir/sstate/PATH"
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
#
# Qemu configuration
#
# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
# be built, if you want to use your host's libSDL instead of the minimal libsdl built
-# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-system-native = " sdl"
PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-#ASSUME_PROVIDED += "libsdl-native"
+#ASSUME_PROVIDED += "libsdl2-native"
# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
# track the version of this file when it was generated. This can safely be ignored if
@@ -257,7 +272,7 @@ PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
PREFERRED_PROVIDER_virtual/egl = "libegl"
PREFERRED_PROVIDER_virtual/libgl = ""
PREFERRED_PROVIDER_virtual/mesa = ""
-PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_virtual/libgbm = "libgbm"
PREFERRED_PROVIDER_libgbm-dev = "libgbm"
BBMASK .= "|mesa-gl"
# Mask MMP recipes
@@ -266,9 +281,6 @@ BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
# Add for gstreamer plugins ugly
LICENSE_FLAGS_WHITELIST = "commercial"
-# Fix the Warning of gstreamer plugins
-RDEPENDS_gstreamer1.0-plugins-bad = "libwayland-egl"
-
# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
# Linux ICCOM library (RCG3ZLILL4101ZNO)
#DISTRO_FEATURES_append = " iccom"
diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/mmp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/mmp/local-wayland.conf
index fca34f7..ae1bbf0 100644
--- a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/mmp/local-wayland.conf
+++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/mmp/local-wayland.conf
@@ -28,13 +28,13 @@
# There are also the following hardware board target machines included for
# demonstration purposes:
#
-#MACHINE ?= "beaglebone"
+#MACHINE ?= "beaglebone-yocto"
#MACHINE ?= "genericx86"
#MACHINE ?= "genericx86-64"
#MACHINE ?= "mpc8315e-rdb"
#MACHINE ?= "edgerouter"
#
-# This sets the default machine to be qemux86 if no other machine is selected:
+# This sets the default machine to be qemux86-64 if no other machine is selected:
MACHINE ??= "h3ulcb"
#
@@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm"
# variable can contain the following options:
# "dbg-pkgs" - add -dbg packages for all installed packages
# (adds symbol information for debugging/profiling)
+# "src-pkgs" - add -src packages for all installed packages
+# (adds source code for debugging)
# "dev-pkgs" - add -dev packages for all installed packages
# (useful if you want to develop against libs in the image)
# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
@@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink"
# Runtime testing of images
#
# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
+# after any root filesystems are created and run tests against those images. It can also
+# run tests against any SDK that are built. To enable this uncomment these lines.
+# See classes/test{image,sdk}.bbclass for further details.
+#IMAGE_CLASSES += "testimage testsdk"
+#TESTIMAGE_AUTO_qemuall = "1"
+
#
# Interactive shell configuration
#
@@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\
#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
#file://.* file:///some/local/dir/sstate/PATH"
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
#
# Qemu configuration
#
# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
# be built, if you want to use your host's libSDL instead of the minimal libsdl built
-# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-system-native = " sdl"
PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-#ASSUME_PROVIDED += "libsdl-native"
+#ASSUME_PROVIDED += "libsdl2-native"
# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
# track the version of this file when it was generated. This can safely be ignored if
@@ -257,7 +272,7 @@ PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
PREFERRED_PROVIDER_virtual/egl = "libegl"
PREFERRED_PROVIDER_virtual/libgl = ""
PREFERRED_PROVIDER_virtual/mesa = ""
-PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_virtual/libgbm = "libgbm"
PREFERRED_PROVIDER_libgbm-dev = "libgbm"
BBMASK .= "|mesa-gl"
diff --git a/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/bsp/local-wayland.conf
index 0a4a79b..f298e8f 100644
--- a/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/bsp/local-wayland.conf
+++ b/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/bsp/local-wayland.conf
@@ -28,13 +28,13 @@
# There are also the following hardware board target machines included for
# demonstration purposes:
#
-#MACHINE ?= "beaglebone"
+#MACHINE ?= "beaglebone-yocto"
#MACHINE ?= "genericx86"
#MACHINE ?= "genericx86-64"
#MACHINE ?= "mpc8315e-rdb"
#MACHINE ?= "edgerouter"
#
-# This sets the default machine to be qemux86 if no other machine is selected:
+# This sets the default machine to be qemux86-64 if no other machine is selected:
MACHINE ??= "m3nulcb"
#
@@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm"
# variable can contain the following options:
# "dbg-pkgs" - add -dbg packages for all installed packages
# (adds symbol information for debugging/profiling)
+# "src-pkgs" - add -src packages for all installed packages
+# (adds source code for debugging)
# "dev-pkgs" - add -dev packages for all installed packages
# (useful if you want to develop against libs in the image)
# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
@@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink"
# Runtime testing of images
#
# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
+# after any root filesystems are created and run tests against those images. It can also
+# run tests against any SDK that are built. To enable this uncomment these lines.
+# See classes/test{image,sdk}.bbclass for further details.
+#IMAGE_CLASSES += "testimage testsdk"
+#TESTIMAGE_AUTO_qemuall = "1"
+
#
# Interactive shell configuration
#
@@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\
#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
#file://.* file:///some/local/dir/sstate/PATH"
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
#
# Qemu configuration
#
# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
# be built, if you want to use your host's libSDL instead of the minimal libsdl built
-# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-system-native = " sdl"
PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-#ASSUME_PROVIDED += "libsdl-native"
+#ASSUME_PROVIDED += "libsdl2-native"
# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
# track the version of this file when it was generated. This can safely be ignored if
diff --git a/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/bsp/local.conf
index 4114bd5..c7b5ab2 100644
--- a/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/bsp/local.conf
+++ b/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/bsp/local.conf
@@ -28,13 +28,13 @@
# There are also the following hardware board target machines included for
# demonstration purposes:
#
-#MACHINE ?= "beaglebone"
+#MACHINE ?= "beaglebone-yocto"
#MACHINE ?= "genericx86"
#MACHINE ?= "genericx86-64"
#MACHINE ?= "mpc8315e-rdb"
#MACHINE ?= "edgerouter"
#
-# This sets the default machine to be qemux86 if no other machine is selected:
+# This sets the default machine to be qemux86-64 if no other machine is selected:
MACHINE ??= "m3nulcb"
#
@@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm"
# variable can contain the following options:
# "dbg-pkgs" - add -dbg packages for all installed packages
# (adds symbol information for debugging/profiling)
+# "src-pkgs" - add -src packages for all installed packages
+# (adds source code for debugging)
# "dev-pkgs" - add -dev packages for all installed packages
# (useful if you want to develop against libs in the image)
# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
@@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink"
# Runtime testing of images
#
# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
+# after any root filesystems are created and run tests against those images. It can also
+# run tests against any SDK that are built. To enable this uncomment these lines.
+# See classes/test{image,sdk}.bbclass for further details.
+#IMAGE_CLASSES += "testimage testsdk"
+#TESTIMAGE_AUTO_qemuall = "1"
+
#
# Interactive shell configuration
#
@@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\
#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
#file://.* file:///some/local/dir/sstate/PATH"
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
#
# Qemu configuration
#
# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
# be built, if you want to use your host's libSDL instead of the minimal libsdl built
-# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-system-native = " sdl"
PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-#ASSUME_PROVIDED += "libsdl-native"
+#ASSUME_PROVIDED += "libsdl2-native"
# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
# track the version of this file when it was generated. This can safely be ignored if
diff --git a/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/gfx-only/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/gfx-only/local-wayland.conf
index 64e45b9..902577b 100644
--- a/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/gfx-only/local-wayland.conf
+++ b/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/gfx-only/local-wayland.conf
@@ -28,13 +28,13 @@
# There are also the following hardware board target machines included for
# demonstration purposes:
#
-#MACHINE ?= "beaglebone"
+#MACHINE ?= "beaglebone-yocto"
#MACHINE ?= "genericx86"
#MACHINE ?= "genericx86-64"
#MACHINE ?= "mpc8315e-rdb"
#MACHINE ?= "edgerouter"
#
-# This sets the default machine to be qemux86 if no other machine is selected:
+# This sets the default machine to be qemux86-64 if no other machine is selected:
MACHINE ??= "m3nulcb"
#
@@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm"
# variable can contain the following options:
# "dbg-pkgs" - add -dbg packages for all installed packages
# (adds symbol information for debugging/profiling)
+# "src-pkgs" - add -src packages for all installed packages
+# (adds source code for debugging)
# "dev-pkgs" - add -dev packages for all installed packages
# (useful if you want to develop against libs in the image)
# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
@@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink"
# Runtime testing of images
#
# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
+# after any root filesystems are created and run tests against those images. It can also
+# run tests against any SDK that are built. To enable this uncomment these lines.
+# See classes/test{image,sdk}.bbclass for further details.
+#IMAGE_CLASSES += "testimage testsdk"
+#TESTIMAGE_AUTO_qemuall = "1"
+
#
# Interactive shell configuration
#
@@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\
#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
#file://.* file:///some/local/dir/sstate/PATH"
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
#
# Qemu configuration
#
# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
# be built, if you want to use your host's libSDL instead of the minimal libsdl built
-# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-system-native = " sdl"
PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-#ASSUME_PROVIDED += "libsdl-native"
+#ASSUME_PROVIDED += "libsdl2-native"
# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
# track the version of this file when it was generated. This can safely be ignored if
@@ -257,7 +272,7 @@ PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
PREFERRED_PROVIDER_virtual/egl = "libegl"
PREFERRED_PROVIDER_virtual/libgl = ""
PREFERRED_PROVIDER_virtual/mesa = ""
-PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_virtual/libgbm = "libgbm"
PREFERRED_PROVIDER_libgbm-dev = "libgbm"
BBMASK .= "|mesa-gl"
# Mask MMP recipes
@@ -266,9 +281,6 @@ BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
# Add for gstreamer plugins ugly
LICENSE_FLAGS_WHITELIST = "commercial"
-# Fix the Warning of gstreamer plugins
-RDEPENDS_gstreamer1.0-plugins-bad = "libwayland-egl"
-
# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
# Linux ICCOM library (RCG3ZLILL4101ZNO)
#DISTRO_FEATURES_append = " iccom"
diff --git a/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/mmp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/mmp/local-wayland.conf
index a73b537..c99d021 100644
--- a/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/mmp/local-wayland.conf
+++ b/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/mmp/local-wayland.conf
@@ -28,13 +28,13 @@
# There are also the following hardware board target machines included for
# demonstration purposes:
#
-#MACHINE ?= "beaglebone"
+#MACHINE ?= "beaglebone-yocto"
#MACHINE ?= "genericx86"
#MACHINE ?= "genericx86-64"
#MACHINE ?= "mpc8315e-rdb"
#MACHINE ?= "edgerouter"
#
-# This sets the default machine to be qemux86 if no other machine is selected:
+# This sets the default machine to be qemux86-64 if no other machine is selected:
MACHINE ??= "m3nulcb"
#
@@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm"
# variable can contain the following options:
# "dbg-pkgs" - add -dbg packages for all installed packages
# (adds symbol information for debugging/profiling)
+# "src-pkgs" - add -src packages for all installed packages
+# (adds source code for debugging)
# "dev-pkgs" - add -dev packages for all installed packages
# (useful if you want to develop against libs in the image)
# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
@@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink"
# Runtime testing of images
#
# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
+# after any root filesystems are created and run tests against those images. It can also
+# run tests against any SDK that are built. To enable this uncomment these lines.
+# See classes/test{image,sdk}.bbclass for further details.
+#IMAGE_CLASSES += "testimage testsdk"
+#TESTIMAGE_AUTO_qemuall = "1"
+
#
# Interactive shell configuration
#
@@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\
#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
#file://.* file:///some/local/dir/sstate/PATH"
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
#
# Qemu configuration
#
# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
# be built, if you want to use your host's libSDL instead of the minimal libsdl built
-# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-system-native = " sdl"
PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-#ASSUME_PROVIDED += "libsdl-native"
+#ASSUME_PROVIDED += "libsdl2-native"
# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
# track the version of this file when it was generated. This can safely be ignored if
@@ -257,7 +272,7 @@ PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
PREFERRED_PROVIDER_virtual/egl = "libegl"
PREFERRED_PROVIDER_virtual/libgl = ""
PREFERRED_PROVIDER_virtual/mesa = ""
-PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_virtual/libgbm = "libgbm"
PREFERRED_PROVIDER_libgbm-dev = "libgbm"
BBMASK .= "|mesa-gl"
diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local-wayland.conf
index 00f5c8c..ef7c778 100644
--- a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local-wayland.conf
+++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local-wayland.conf
@@ -28,13 +28,13 @@
# There are also the following hardware board target machines included for
# demonstration purposes:
#
-#MACHINE ?= "beaglebone"
+#MACHINE ?= "beaglebone-yocto"
#MACHINE ?= "genericx86"
#MACHINE ?= "genericx86-64"
#MACHINE ?= "mpc8315e-rdb"
#MACHINE ?= "edgerouter"
#
-# This sets the default machine to be qemux86 if no other machine is selected:
+# This sets the default machine to be qemux86-64 if no other machine is selected:
MACHINE ??= "m3ulcb"
#
@@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm"
# variable can contain the following options:
# "dbg-pkgs" - add -dbg packages for all installed packages
# (adds symbol information for debugging/profiling)
+# "src-pkgs" - add -src packages for all installed packages
+# (adds source code for debugging)
# "dev-pkgs" - add -dev packages for all installed packages
# (useful if you want to develop against libs in the image)
# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
@@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink"
# Runtime testing of images
#
# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
+# after any root filesystems are created and run tests against those images. It can also
+# run tests against any SDK that are built. To enable this uncomment these lines.
+# See classes/test{image,sdk}.bbclass for further details.
+#IMAGE_CLASSES += "testimage testsdk"
+#TESTIMAGE_AUTO_qemuall = "1"
+
#
# Interactive shell configuration
#
@@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\
#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
#file://.* file:///some/local/dir/sstate/PATH"
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
#
# Qemu configuration
#
# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
# be built, if you want to use your host's libSDL instead of the minimal libsdl built
-# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-system-native = " sdl"
PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-#ASSUME_PROVIDED += "libsdl-native"
+#ASSUME_PROVIDED += "libsdl2-native"
# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
# track the version of this file when it was generated. This can safely be ignored if
diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local.conf
index e5fa697..cf47eb0 100644
--- a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local.conf
+++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local.conf
@@ -28,13 +28,13 @@
# There are also the following hardware board target machines included for
# demonstration purposes:
#
-#MACHINE ?= "beaglebone"
+#MACHINE ?= "beaglebone-yocto"
#MACHINE ?= "genericx86"
#MACHINE ?= "genericx86-64"
#MACHINE ?= "mpc8315e-rdb"
#MACHINE ?= "edgerouter"
#
-# This sets the default machine to be qemux86 if no other machine is selected:
+# This sets the default machine to be qemux86-64 if no other machine is selected:
MACHINE ??= "m3ulcb"
#
@@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm"
# variable can contain the following options:
# "dbg-pkgs" - add -dbg packages for all installed packages
# (adds symbol information for debugging/profiling)
+# "src-pkgs" - add -src packages for all installed packages
+# (adds source code for debugging)
# "dev-pkgs" - add -dev packages for all installed packages
# (useful if you want to develop against libs in the image)
# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
@@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink"
# Runtime testing of images
#
# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
+# after any root filesystems are created and run tests against those images. It can also
+# run tests against any SDK that are built. To enable this uncomment these lines.
+# See classes/test{image,sdk}.bbclass for further details.
+#IMAGE_CLASSES += "testimage testsdk"
+#TESTIMAGE_AUTO_qemuall = "1"
+
#
# Interactive shell configuration
#
@@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\
#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
#file://.* file:///some/local/dir/sstate/PATH"
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
#
# Qemu configuration
#
# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
# be built, if you want to use your host's libSDL instead of the minimal libsdl built
-# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-system-native = " sdl"
PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-#ASSUME_PROVIDED += "libsdl-native"
+#ASSUME_PROVIDED += "libsdl2-native"
# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
# track the version of this file when it was generated. This can safely be ignored if
diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/gfx-only/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/gfx-only/local-wayland.conf
index 9e42306..17e9f6b 100644
--- a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/gfx-only/local-wayland.conf
+++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/gfx-only/local-wayland.conf
@@ -28,13 +28,13 @@
# There are also the following hardware board target machines included for
# demonstration purposes:
#
-#MACHINE ?= "beaglebone"
+#MACHINE ?= "beaglebone-yocto"
#MACHINE ?= "genericx86"
#MACHINE ?= "genericx86-64"
#MACHINE ?= "mpc8315e-rdb"
#MACHINE ?= "edgerouter"
#
-# This sets the default machine to be qemux86 if no other machine is selected:
+# This sets the default machine to be qemux86-64 if no other machine is selected:
MACHINE ??= "m3ulcb"
#
@@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm"
# variable can contain the following options:
# "dbg-pkgs" - add -dbg packages for all installed packages
# (adds symbol information for debugging/profiling)
+# "src-pkgs" - add -src packages for all installed packages
+# (adds source code for debugging)
# "dev-pkgs" - add -dev packages for all installed packages
# (useful if you want to develop against libs in the image)
# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
@@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink"
# Runtime testing of images
#
# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
+# after any root filesystems are created and run tests against those images. It can also
+# run tests against any SDK that are built. To enable this uncomment these lines.
+# See classes/test{image,sdk}.bbclass for further details.
+#IMAGE_CLASSES += "testimage testsdk"
+#TESTIMAGE_AUTO_qemuall = "1"
+
#
# Interactive shell configuration
#
@@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\
#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
#file://.* file:///some/local/dir/sstate/PATH"
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
#
# Qemu configuration
#
# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
# be built, if you want to use your host's libSDL instead of the minimal libsdl built
-# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-system-native = " sdl"
PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-#ASSUME_PROVIDED += "libsdl-native"
+#ASSUME_PROVIDED += "libsdl2-native"
# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
# track the version of this file when it was generated. This can safely be ignored if
@@ -257,7 +272,7 @@ PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
PREFERRED_PROVIDER_virtual/egl = "libegl"
PREFERRED_PROVIDER_virtual/libgl = ""
PREFERRED_PROVIDER_virtual/mesa = ""
-PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_virtual/libgbm = "libgbm"
PREFERRED_PROVIDER_libgbm-dev = "libgbm"
BBMASK .= "|mesa-gl"
# Mask MMP recipes
@@ -266,9 +281,6 @@ BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
# Add for gstreamer plugins ugly
LICENSE_FLAGS_WHITELIST = "commercial"
-# Fix the Warning of gstreamer plugins
-RDEPENDS_gstreamer1.0-plugins-bad = "libwayland-egl"
-
# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
# Linux ICCOM library (RCG3ZLILL4101ZNO)
#DISTRO_FEATURES_append = " iccom"
diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/mmp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/mmp/local-wayland.conf
index 5458748..102c4f4 100644
--- a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/mmp/local-wayland.conf
+++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/mmp/local-wayland.conf
@@ -28,13 +28,13 @@
# There are also the following hardware board target machines included for
# demonstration purposes:
#
-#MACHINE ?= "beaglebone"
+#MACHINE ?= "beaglebone-yocto"
#MACHINE ?= "genericx86"
#MACHINE ?= "genericx86-64"
#MACHINE ?= "mpc8315e-rdb"
#MACHINE ?= "edgerouter"
#
-# This sets the default machine to be qemux86 if no other machine is selected:
+# This sets the default machine to be qemux86-64 if no other machine is selected:
MACHINE ??= "m3ulcb"
#
@@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm"
# variable can contain the following options:
# "dbg-pkgs" - add -dbg packages for all installed packages
# (adds symbol information for debugging/profiling)
+# "src-pkgs" - add -src packages for all installed packages
+# (adds source code for debugging)
# "dev-pkgs" - add -dev packages for all installed packages
# (useful if you want to develop against libs in the image)
# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
@@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink"
# Runtime testing of images
#
# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
+# after any root filesystems are created and run tests against those images. It can also
+# run tests against any SDK that are built. To enable this uncomment these lines.
+# See classes/test{image,sdk}.bbclass for further details.
+#IMAGE_CLASSES += "testimage testsdk"
+#TESTIMAGE_AUTO_qemuall = "1"
+
#
# Interactive shell configuration
#
@@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\
#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
#file://.* file:///some/local/dir/sstate/PATH"
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
#
# Qemu configuration
#
# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
# be built, if you want to use your host's libSDL instead of the minimal libsdl built
-# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-system-native = " sdl"
PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-#ASSUME_PROVIDED += "libsdl-native"
+#ASSUME_PROVIDED += "libsdl2-native"
# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
# track the version of this file when it was generated. This can safely be ignored if
@@ -257,7 +272,7 @@ PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
PREFERRED_PROVIDER_virtual/egl = "libegl"
PREFERRED_PROVIDER_virtual/libgl = ""
PREFERRED_PROVIDER_virtual/mesa = ""
-PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_virtual/libgbm = "libgbm"
PREFERRED_PROVIDER_libgbm-dev = "libgbm"
BBMASK .= "|mesa-gl"
diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-ltp.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-ltp.conf
index 2f931fd..6626a02 100644
--- a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-ltp.conf
+++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-ltp.conf
@@ -28,13 +28,13 @@
# There are also the following hardware board target machines included for
# demonstration purposes:
#
-#MACHINE ?= "beaglebone"
+#MACHINE ?= "beaglebone-yocto"
#MACHINE ?= "genericx86"
#MACHINE ?= "genericx86-64"
#MACHINE ?= "mpc8315e-rdb"
#MACHINE ?= "edgerouter"
#
-# This sets the default machine to be qemux86 if no other machine is selected:
+# This sets the default machine to be qemux86-64 if no other machine is selected:
MACHINE ??= "salvator-x"
# This sets the SoC
@@ -130,6 +130,8 @@ PACKAGE_CLASSES ?= "package_rpm"
# variable can contain the following options:
# "dbg-pkgs" - add -dbg packages for all installed packages
# (adds symbol information for debugging/profiling)
+# "src-pkgs" - add -src packages for all installed packages
+# (adds source code for debugging)
# "dev-pkgs" - add -dev packages for all installed packages
# (useful if you want to develop against libs in the image)
# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
@@ -144,7 +146,7 @@ PACKAGE_CLASSES ?= "package_rpm"
# There are other application targets that can be used here too, see
# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
# We default to enabling the debugging tweaks.
-EXTRA_IMAGE_FEATURES ?= "debug-tweaks tools-sdk"
+EXTRA_IMAGE_FEATURES ?= "debug-tweaks"
#
# Additional image features
@@ -163,10 +165,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink"
# Runtime testing of images
#
# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
+# after any root filesystems are created and run tests against those images. It can also
+# run tests against any SDK that are built. To enable this uncomment these lines.
+# See classes/test{image,sdk}.bbclass for further details.
+#IMAGE_CLASSES += "testimage testsdk"
+#TESTIMAGE_AUTO_qemuall = "1"
+
#
# Interactive shell configuration
#
@@ -224,17 +228,28 @@ BB_DISKMON_DIRS ??= "\
#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
#file://.* file:///some/local/dir/sstate/PATH"
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
#
# Qemu configuration
#
# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
# be built, if you want to use your host's libSDL instead of the minimal libsdl built
-# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-system-native = " sdl"
PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-#ASSUME_PROVIDED += "libsdl-native"
+#ASSUME_PROVIDED += "libsdl2-native"
# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
# track the version of this file when it was generated. This can safely be ignored if
diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-wayland.conf
index 5603065..b5523ac 100644
--- a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-wayland.conf
+++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-wayland.conf
@@ -28,13 +28,13 @@
# There are also the following hardware board target machines included for
# demonstration purposes:
#
-#MACHINE ?= "beaglebone"
+#MACHINE ?= "beaglebone-yocto"
#MACHINE ?= "genericx86"
#MACHINE ?= "genericx86-64"
#MACHINE ?= "mpc8315e-rdb"
#MACHINE ?= "edgerouter"
#
-# This sets the default machine to be qemux86 if no other machine is selected:
+# This sets the default machine to be qemux86-64 if no other machine is selected:
MACHINE ??= "salvator-x"
# This sets the SoC
@@ -130,6 +130,8 @@ PACKAGE_CLASSES ?= "package_rpm"
# variable can contain the following options:
# "dbg-pkgs" - add -dbg packages for all installed packages
# (adds symbol information for debugging/profiling)
+# "src-pkgs" - add -src packages for all installed packages
+# (adds source code for debugging)
# "dev-pkgs" - add -dev packages for all installed packages
# (useful if you want to develop against libs in the image)
# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
@@ -163,10 +165,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink"
# Runtime testing of images
#
# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
+# after any root filesystems are created and run tests against those images. It can also
+# run tests against any SDK that are built. To enable this uncomment these lines.
+# See classes/test{image,sdk}.bbclass for further details.
+#IMAGE_CLASSES += "testimage testsdk"
+#TESTIMAGE_AUTO_qemuall = "1"
+
#
# Interactive shell configuration
#
@@ -224,17 +228,28 @@ BB_DISKMON_DIRS ??= "\
#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
#file://.* file:///some/local/dir/sstate/PATH"
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
#
# Qemu configuration
#
# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
# be built, if you want to use your host's libSDL instead of the minimal libsdl built
-# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-system-native = " sdl"
PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-#ASSUME_PROVIDED += "libsdl-native"
+#ASSUME_PROVIDED += "libsdl2-native"
# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
# track the version of this file when it was generated. This can safely be ignored if
diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local.conf
index 3e991d1..f4c747d 100644
--- a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local.conf
+++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local.conf
@@ -28,13 +28,13 @@
# There are also the following hardware board target machines included for
# demonstration purposes:
#
-#MACHINE ?= "beaglebone"
+#MACHINE ?= "beaglebone-yocto"
#MACHINE ?= "genericx86"
#MACHINE ?= "genericx86-64"
#MACHINE ?= "mpc8315e-rdb"
#MACHINE ?= "edgerouter"
#
-# This sets the default machine to be qemux86 if no other machine is selected:
+# This sets the default machine to be qemux86-64 if no other machine is selected:
MACHINE ??= "salvator-x"
# This sets the SoC
@@ -130,6 +130,8 @@ PACKAGE_CLASSES ?= "package_rpm"
# variable can contain the following options:
# "dbg-pkgs" - add -dbg packages for all installed packages
# (adds symbol information for debugging/profiling)
+# "src-pkgs" - add -src packages for all installed packages
+# (adds source code for debugging)
# "dev-pkgs" - add -dev packages for all installed packages
# (useful if you want to develop against libs in the image)
# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
@@ -163,10 +165,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink"
# Runtime testing of images
#
# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
+# after any root filesystems are created and run tests against those images. It can also
+# run tests against any SDK that are built. To enable this uncomment these lines.
+# See classes/test{image,sdk}.bbclass for further details.
+#IMAGE_CLASSES += "testimage testsdk"
+#TESTIMAGE_AUTO_qemuall = "1"
+
#
# Interactive shell configuration
#
@@ -224,17 +228,28 @@ BB_DISKMON_DIRS ??= "\
#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
#file://.* file:///some/local/dir/sstate/PATH"
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
#
# Qemu configuration
#
# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
# be built, if you want to use your host's libSDL instead of the minimal libsdl built
-# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-system-native = " sdl"
PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-#ASSUME_PROVIDED += "libsdl-native"
+#ASSUME_PROVIDED += "libsdl2-native"
# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
# track the version of this file when it was generated. This can safely be ignored if
diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/gfx-only/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/gfx-only/local-wayland.conf
index 1932668..7ef3894 100644
--- a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/gfx-only/local-wayland.conf
+++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/gfx-only/local-wayland.conf
@@ -28,13 +28,13 @@
# There are also the following hardware board target machines included for
# demonstration purposes:
#
-#MACHINE ?= "beaglebone"
+#MACHINE ?= "beaglebone-yocto"
#MACHINE ?= "genericx86"
#MACHINE ?= "genericx86-64"
#MACHINE ?= "mpc8315e-rdb"
#MACHINE ?= "edgerouter"
#
-# This sets the default machine to be qemux86 if no other machine is selected:
+# This sets the default machine to be qemux86-64 if no other machine is selected:
MACHINE ??= "salvator-x"
# This sets the SoC
@@ -130,6 +130,8 @@ PACKAGE_CLASSES ?= "package_rpm"
# variable can contain the following options:
# "dbg-pkgs" - add -dbg packages for all installed packages
# (adds symbol information for debugging/profiling)
+# "src-pkgs" - add -src packages for all installed packages
+# (adds source code for debugging)
# "dev-pkgs" - add -dev packages for all installed packages
# (useful if you want to develop against libs in the image)
# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
@@ -163,10 +165,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink"
# Runtime testing of images
#
# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
+# after any root filesystems are created and run tests against those images. It can also
+# run tests against any SDK that are built. To enable this uncomment these lines.
+# See classes/test{image,sdk}.bbclass for further details.
+#IMAGE_CLASSES += "testimage testsdk"
+#TESTIMAGE_AUTO_qemuall = "1"
+
#
# Interactive shell configuration
#
@@ -224,17 +228,28 @@ BB_DISKMON_DIRS ??= "\
#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
#file://.* file:///some/local/dir/sstate/PATH"
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
#
# Qemu configuration
#
# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
# be built, if you want to use your host's libSDL instead of the minimal libsdl built
-# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-system-native = " sdl"
PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-#ASSUME_PROVIDED += "libsdl-native"
+#ASSUME_PROVIDED += "libsdl2-native"
# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
# track the version of this file when it was generated. This can safely be ignored if
@@ -263,7 +278,7 @@ PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
PREFERRED_PROVIDER_virtual/egl = "libegl"
PREFERRED_PROVIDER_virtual/libgl = ""
PREFERRED_PROVIDER_virtual/mesa = ""
-PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_virtual/libgbm = "libgbm"
PREFERRED_PROVIDER_libgbm-dev = "libgbm"
BBMASK .= "|mesa-gl"
# Mask MMP recipes
@@ -272,9 +287,6 @@ BBMASK .= "|kernel-module-uvcs-drv|omx-user-module"
# Add for gstreamer plugins ugly
LICENSE_FLAGS_WHITELIST = "commercial"
-# Fix the Warning of gstreamer plugins
-RDEPENDS_gstreamer1.0-plugins-bad = "libwayland-egl"
-
# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
# Linux ICCOM library (RCG3ZLILL4101ZNO)
#DISTRO_FEATURES_append = " iccom"
diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/mmp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/mmp/local-wayland.conf
index d5883a4..530ff16 100644
--- a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/mmp/local-wayland.conf
+++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/mmp/local-wayland.conf
@@ -28,13 +28,13 @@
# There are also the following hardware board target machines included for
# demonstration purposes:
#
-#MACHINE ?= "beaglebone"
+#MACHINE ?= "beaglebone-yocto"
#MACHINE ?= "genericx86"
#MACHINE ?= "genericx86-64"
#MACHINE ?= "mpc8315e-rdb"
#MACHINE ?= "edgerouter"
#
-# This sets the default machine to be qemux86 if no other machine is selected:
+# This sets the default machine to be qemux86-64 if no other machine is selected:
MACHINE ??= "salvator-x"
# This sets the SoC
@@ -130,6 +130,8 @@ PACKAGE_CLASSES ?= "package_rpm"
# variable can contain the following options:
# "dbg-pkgs" - add -dbg packages for all installed packages
# (adds symbol information for debugging/profiling)
+# "src-pkgs" - add -src packages for all installed packages
+# (adds source code for debugging)
# "dev-pkgs" - add -dev packages for all installed packages
# (useful if you want to develop against libs in the image)
# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages
@@ -163,10 +165,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink"
# Runtime testing of images
#
# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
+# after any root filesystems are created and run tests against those images. It can also
+# run tests against any SDK that are built. To enable this uncomment these lines.
+# See classes/test{image,sdk}.bbclass for further details.
+#IMAGE_CLASSES += "testimage testsdk"
+#TESTIMAGE_AUTO_qemuall = "1"
+
#
# Interactive shell configuration
#
@@ -224,17 +228,28 @@ BB_DISKMON_DIRS ??= "\
#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
#file://.* file:///some/local/dir/sstate/PATH"
+#
+# Yocto Project SState Mirror
+#
+# The Yocto Project has prebuilt artefacts available for its releases, you can enable
+# use of these by uncommenting the following line. This will mean the build uses
+# the network to check for artefacts at the start of builds, which does slow it down
+# equally, it will also speed up the builds by not having to build things if they are
+# present in the cache. It assumes you can download something faster than you can build it
+# which will depend on your network.
+#
+#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"
#
# Qemu configuration
#
# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. By default libsdl-native will
+# seen. The two lines below enable the SDL backend too. By default libsdl2-native will
# be built, if you want to use your host's libSDL instead of the minimal libsdl built
-# by libsdl-native then uncomment the ASSUME_PROVIDED line below.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
+# by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
+PACKAGECONFIG_append_pn-qemu-system-native = " sdl"
PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-#ASSUME_PROVIDED += "libsdl-native"
+#ASSUME_PROVIDED += "libsdl2-native"
# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
# track the version of this file when it was generated. This can safely be ignored if
@@ -263,7 +278,7 @@ PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
PREFERRED_PROVIDER_virtual/egl = "libegl"
PREFERRED_PROVIDER_virtual/libgl = ""
PREFERRED_PROVIDER_virtual/mesa = ""
-PREFERRED_PROVIDER_libgbm = "libgbm"
+PREFERRED_PROVIDER_virtual/libgbm = "libgbm"
PREFERRED_PROVIDER_libgbm-dev = "libgbm"
BBMASK .= "|mesa-gl"